summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorStefano Babic <sbabic@denx.de>2014-07-16 06:51:30 (GMT)
committerStefano Babic <sbabic@denx.de>2014-07-16 06:51:30 (GMT)
commitdab5e3469d294a4e1ffed8407d296a78e02cc01f (patch)
treec6378034591210b3142ca3add806d52c6ea22b3b /include
parent14a1613140519a8d0a88e6054c302a8cb3e067a5 (diff)
parent524123a70761110c5cf3ccc5f52f6d4da071b959 (diff)
downloadu-boot-dab5e3469d294a4e1ffed8407d296a78e02cc01f.tar.xz
Merge branch 'master' of git://git.denx.de/u-boot
Signed-off-by: Stefano Babic <sbabic@denx.de> Conflicts: boards.cfg
Diffstat (limited to 'include')
-rw-r--r--include/asm-generic/global_data.h2
-rw-r--r--include/asm-generic/gpio.h22
-rw-r--r--include/autoboot.h47
-rw-r--r--include/bootm.h57
-rw-r--r--include/bootretry.h59
-rw-r--r--include/cli.h149
-rw-r--r--include/cli_hush.h (renamed from include/hush.h)4
-rw-r--r--include/command.h1
-rw-r--r--include/common.h23
-rw-r--r--include/commproc.h144
-rw-r--r--include/config_fallbacks.h8
-rw-r--r--include/configs/Adder.h193
-rw-r--r--include/configs/HIDDEN_DRAGON.h371
-rw-r--r--include/configs/ISPAN.h330
-rw-r--r--include/configs/MPC8260ADS.h549
-rw-r--r--include/configs/MPC8315ERDB.h32
-rw-r--r--include/configs/MPC8536DS.h29
-rw-r--r--include/configs/MPC8569MDS.h29
-rw-r--r--include/configs/MPC8572DS.h30
-rw-r--r--include/configs/MPC86xADS.h51
-rw-r--r--include/configs/MPC885ADS.h39
-rw-r--r--include/configs/NETPHONE.h701
-rw-r--r--include/configs/NETTA.h666
-rw-r--r--include/configs/NETTA2.h654
-rw-r--r--include/configs/P1023RDS.h46
-rw-r--r--include/configs/QS823.h551
-rw-r--r--include/configs/QS850.h551
-rw-r--r--include/configs/QS860T.h390
-rw-r--r--include/configs/RBC823.h407
-rw-r--r--include/configs/RPXlite_DW.h462
-rw-r--r--include/configs/Rattler.h279
-rw-r--r--include/configs/SIMPC8313.h580
-rw-r--r--include/configs/T1040QDS.h6
-rw-r--r--include/configs/T104xRDB.h6
-rw-r--r--include/configs/T208xQDS.h5
-rw-r--r--include/configs/ZPC1900.h261
-rw-r--r--include/configs/am335x_evm.h15
-rw-r--r--include/configs/am3517_crane.h1
-rw-r--r--include/configs/am43xx_evm.h47
-rw-r--r--include/configs/arndale.h6
-rw-r--r--include/configs/at91sam9m10g45ek.h41
-rw-r--r--include/configs/at91sam9n12ek.h3
-rw-r--r--include/configs/at91sam9x5ek.h3
-rw-r--r--include/configs/atngw100mkii.h1
-rw-r--r--include/configs/bcm28155_ap.h1
-rw-r--r--include/configs/beaver.h2
-rw-r--r--include/configs/bur_am335x_common.h4
-rw-r--r--include/configs/calimain.h3
-rw-r--r--include/configs/cm_t335.h1
-rw-r--r--include/configs/cm_t35.h3
-rw-r--r--include/configs/controlcenterd.h7
-rw-r--r--include/configs/corvus.h3
-rw-r--r--include/configs/cpu9260.h1
-rw-r--r--include/configs/davinci_dm6467evm.h2
-rw-r--r--include/configs/debris.h443
-rw-r--r--include/configs/devkit8000.h1
-rw-r--r--include/configs/dig297.h1
-rw-r--r--include/configs/dlvision-10g.h29
-rw-r--r--include/configs/edb93xx.h292
-rw-r--r--include/configs/ep8248.h253
-rw-r--r--include/configs/ethernut5.h4
-rw-r--r--include/configs/exynos4-dt.h4
-rw-r--r--include/configs/exynos5-dt.h16
-rw-r--r--include/configs/exynos5250-dt.h15
-rw-r--r--include/configs/exynos5420.h52
-rw-r--r--include/configs/gw_ventana.h1
-rw-r--r--include/configs/h2200.h1
-rw-r--r--include/configs/ids8313.h4
-rw-r--r--include/configs/integrator-common.h1
-rw-r--r--include/configs/io.h8
-rw-r--r--include/configs/iocon.h38
-rw-r--r--include/configs/jetson-tk1.h2
-rw-r--r--include/configs/k2hk_evm.h10
-rw-r--r--include/configs/kvme080.h251
-rw-r--r--include/configs/ls2085a_common.h226
-rw-r--r--include/configs/ls2085a_emu.h19
-rw-r--r--include/configs/ls2085a_simu.h16
-rw-r--r--include/configs/mx25pdk.h2
-rw-r--r--include/configs/mx35pdk.h2
-rw-r--r--include/configs/mx53evk.h2
-rw-r--r--include/configs/mx53loco.h2
-rw-r--r--include/configs/neo.h9
-rw-r--r--include/configs/omap3_beagle.h2
-rw-r--r--include/configs/omap3_evm_common.h2
-rw-r--r--include/configs/omap3_igep00x0.h1
-rw-r--r--include/configs/omap3_logic.h1
-rw-r--r--include/configs/omap3_overo.h11
-rw-r--r--include/configs/omap3_zoom1.h1
-rw-r--r--include/configs/peach-pit.h25
-rw-r--r--include/configs/pengwyn.h1
-rw-r--r--include/configs/quad100hd.h281
-rw-r--r--include/configs/quantum.h430
-rw-r--r--include/configs/rpi_b.h1
-rw-r--r--include/configs/s5p_goni.h134
-rw-r--r--include/configs/sama5d3_xplained.h53
-rw-r--r--include/configs/sama5d3xek.h4
-rw-r--r--include/configs/sandbox.h4
-rw-r--r--include/configs/smdk5420.h49
-rw-r--r--include/configs/socfpga_cyclone5.h16
-rw-r--r--include/configs/spc1920.h405
-rw-r--r--include/configs/tam3517-common.h2
-rw-r--r--include/configs/tao3530.h2
-rw-r--r--include/configs/tb100.h123
-rw-r--r--include/configs/tegra-common-post.h9
-rw-r--r--include/configs/tegra-common-ums.h26
-rw-r--r--include/configs/tegra-common.h3
-rw-r--r--include/configs/ti_am335x_common.h9
-rw-r--r--include/configs/ti_armv7_common.h5
-rw-r--r--include/configs/ti_omap4_common.h2
-rw-r--r--include/configs/ti_omap5_common.h3
-rw-r--r--include/configs/tseries.h1
-rw-r--r--include/configs/v37.h375
-rw-r--r--include/configs/venice2.h2
-rw-r--r--include/configs/vexpress_aemv8a.h63
-rw-r--r--include/configs/vf610twr.h12
-rw-r--r--include/configs/vl_ma2sc.h2
-rw-r--r--include/configs/woodburn_common.h2
-rw-r--r--include/configs/zynq-common.h1
-rw-r--r--include/dm-demo.h10
-rw-r--r--include/dm.h2
-rw-r--r--include/dm/device-internal.h20
-rw-r--r--include/dm/device.h28
-rw-r--r--include/dm/lists.h24
-rw-r--r--include/dm/root.h6
-rw-r--r--include/dm/test.h12
-rw-r--r--include/dm/uclass-internal.h10
-rw-r--r--include/dm/uclass.h26
-rw-r--r--include/dt-bindings/gpio/gpio.h15
-rw-r--r--include/dt-bindings/gpio/tegra-gpio.h51
-rw-r--r--include/dt-bindings/interrupt-controller/arm-gic.h22
-rw-r--r--include/dt-bindings/interrupt-controller/irq.h19
-rw-r--r--include/dwmmc.h5
-rw-r--r--include/fat.h6
-rw-r--r--include/fdt_support.h18
-rw-r--r--include/fdtdec.h4
-rw-r--r--include/fsl_mc.h59
-rw-r--r--include/gdsys_fpga.h25
-rw-r--r--include/hash.h39
-rw-r--r--include/image.h23
-rw-r--r--include/initcall.h2
-rw-r--r--include/iotrace.h104
-rw-r--r--include/lcd.h4
-rw-r--r--include/linux/mtd/nand.h19
-rw-r--r--include/linux/mtd/omap_elm.h11
-rw-r--r--include/linux/mtd/omap_gpmc.h11
-rw-r--r--include/mmc.h25
-rw-r--r--include/mpc8260.h4
-rw-r--r--include/part.h11
-rw-r--r--include/pcmcia.h13
-rw-r--r--include/power/max77693_pmic.h2
-rw-r--r--include/power/max8997_pmic.h1
-rw-r--r--include/power/pmic.h5
-rw-r--r--include/power/tps65090_pmic.h73
-rw-r--r--include/power/tps65218.h63
-rw-r--r--include/status_led.h22
-rw-r--r--include/tps6586x.h2
-rw-r--r--include/u-boot/rsa-checksum.h (renamed from include/rsa-checksum.h)4
-rw-r--r--include/u-boot/rsa.h (renamed from include/rsa.h)3
-rw-r--r--include/u-boot/sha1.h (renamed from include/sha1.h)0
-rw-r--r--include/u-boot/sha256.h (renamed from include/sha256.h)0
160 files changed, 2307 insertions, 10141 deletions
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h
index e98b661..2850ed8 100644
--- a/include/asm-generic/global_data.h
+++ b/include/asm-generic/global_data.h
@@ -65,7 +65,7 @@ typedef struct global_data {
struct global_data *new_gd; /* relocated global data */
#ifdef CONFIG_DM
- struct device *dm_root; /* Root instance for Driver Model */
+ struct udevice *dm_root;/* Root instance for Driver Model */
struct list_head uclass_root; /* Head of core tree */
#endif
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index e325df4..a6e52a0 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -86,7 +86,7 @@ enum {
GPIOF_UNKNOWN,
};
-struct device;
+struct udevice;
/**
* struct struct dm_gpio_ops - Driver model GPIO operations
@@ -116,15 +116,15 @@ struct device;
* all devices. Be careful not to confuse offset with gpio in the parameters.
*/
struct dm_gpio_ops {
- int (*request)(struct device *dev, unsigned offset, const char *label);
- int (*free)(struct device *dev, unsigned offset);
- int (*direction_input)(struct device *dev, unsigned offset);
- int (*direction_output)(struct device *dev, unsigned offset,
+ int (*request)(struct udevice *dev, unsigned offset, const char *label);
+ int (*free)(struct udevice *dev, unsigned offset);
+ int (*direction_input)(struct udevice *dev, unsigned offset);
+ int (*direction_output)(struct udevice *dev, unsigned offset,
int value);
- int (*get_value)(struct device *dev, unsigned offset);
- int (*set_value)(struct device *dev, unsigned offset, int value);
- int (*get_function)(struct device *dev, unsigned offset);
- int (*get_state)(struct device *dev, unsigned offset, char *state,
+ int (*get_value)(struct udevice *dev, unsigned offset);
+ int (*set_value)(struct udevice *dev, unsigned offset, int value);
+ int (*get_function)(struct udevice *dev, unsigned offset);
+ int (*get_state)(struct udevice *dev, unsigned offset, char *state,
int maxlen);
};
@@ -166,7 +166,7 @@ struct gpio_dev_priv {
* @offset_count: Returns number of GPIOs within this bank
* @return bank name of this device
*/
-const char *gpio_get_bank_info(struct device *dev, int *offset_count);
+const char *gpio_get_bank_info(struct udevice *dev, int *offset_count);
/**
* gpio_lookup_name - Look up a GPIO name and return its details
@@ -179,7 +179,7 @@ const char *gpio_get_bank_info(struct device *dev, int *offset_count);
* @offsetp: Returns the offset number within this device
* @gpiop: Returns the absolute GPIO number, numbered from 0
*/
-int gpio_lookup_name(const char *name, struct device **devp,
+int gpio_lookup_name(const char *name, struct udevice **devp,
unsigned int *offsetp, unsigned int *gpiop);
#endif /* _ASM_GENERIC_GPIO_H_ */
diff --git a/include/autoboot.h b/include/autoboot.h
new file mode 100644
index 0000000..3a9059a
--- /dev/null
+++ b/include/autoboot.h
@@ -0,0 +1,47 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Add to readline cmdline-editing by
+ * (C) Copyright 2005
+ * JinHua Luo, GuangDong Linux Center, <luo.jinhua@gd-linux.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __AUTOBOOT_H
+#define __AUTOBOOT_H
+
+#ifdef CONFIG_BOOTDELAY
+/**
+ * bootdelay_process() - process the bootd delay
+ *
+ * Process the boot delay, boot limit, then get the value of either
+ * bootcmd, failbootcmd or altbootcmd depending on the current state.
+ * Return this command so it can be executed.
+ *
+ * @return command to executed
+ */
+const char *bootdelay_process(void);
+
+/**
+ * autoboot_command() - run the autoboot command
+ *
+ * If enabled, run the autoboot command returned from bootdelay_process().
+ * Also do the CONFIG_MENUKEY processing if enabled.
+ *
+ * @cmd: Command to run
+ */
+void autoboot_command(const char *cmd);
+#else
+static inline const char *bootdelay_process(void)
+{
+ return NULL;
+}
+
+static inline void autoboot_command(const char *s)
+{
+}
+#endif
+
+#endif
diff --git a/include/bootm.h b/include/bootm.h
new file mode 100644
index 0000000..4a308d8
--- /dev/null
+++ b/include/bootm.h
@@ -0,0 +1,57 @@
+/*
+ * (C) Copyright 2000-2009
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _BOOTM_H
+#define _BOOTM_H
+
+#include <command.h>
+#include <image.h>
+
+#define BOOTM_ERR_RESET (-1)
+#define BOOTM_ERR_OVERLAP (-2)
+#define BOOTM_ERR_UNIMPLEMENTED (-3)
+
+/*
+ * Continue booting an OS image; caller already has:
+ * - copied image header to global variable `header'
+ * - checked header magic number, checksums (both header & image),
+ * - verified image architecture (PPC) and type (KERNEL or MULTI),
+ * - loaded (first part of) image to header load address,
+ * - disabled interrupts.
+ *
+ * @flag: Flags indicating what to do (BOOTM_STATE_...)
+ * @argc: Number of arguments. Note that the arguments are shifted down
+ * so that 0 is the first argument not processed by U-Boot, and
+ * argc is adjusted accordingly. This avoids confusion as to how
+ * many arguments are available for the OS.
+ * @images: Pointers to os/initrd/fdt
+ * @return 1 on error. On success the OS boots so this function does
+ * not return.
+ */
+typedef int boot_os_fn(int flag, int argc, char * const argv[],
+ bootm_headers_t *images);
+
+extern boot_os_fn do_bootm_linux;
+int do_bootelf(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
+void lynxkdi_boot(image_header_t *hdr);
+
+boot_os_fn *bootm_os_get_boot_func(int os);
+
+int bootm_host_load_images(const void *fit, int cfg_noffset);
+
+int boot_selected_os(int argc, char * const argv[], int state,
+ bootm_headers_t *images, boot_os_fn *boot_fn);
+
+ulong bootm_disable_interrupts(void);
+
+/* This is a special function used by bootz */
+int bootm_find_ramdisk_fdt(int flag, int argc, char * const argv[]);
+
+int do_bootm_states(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
+ int states, bootm_headers_t *images, int boot_progress);
+
+#endif
diff --git a/include/bootretry.h b/include/bootretry.h
new file mode 100644
index 0000000..2ecd7a4
--- /dev/null
+++ b/include/bootretry.h
@@ -0,0 +1,59 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __BOOTRETRY_H
+#define __BOOTRETRY_H
+
+#ifdef CONFIG_BOOT_RETRY_TIME
+/**
+ * bootretry_tstc_timeout() - ensure we get a keypress before timeout
+ *
+ * Check for a keypress repeatedly, resetting the watchdog each time. If a
+ * keypress is not received within the command timeout, return an error.
+ *
+ * @return 0 if a key is received in time, -ETIMEDOUT if not
+ */
+int bootretry_tstc_timeout(void);
+
+/**
+ * bootretry_init_cmd_timeout() - set up command timeout
+ *
+ * Get the required command timeout from the environment.
+ */
+void bootretry_init_cmd_timeout(void);
+
+/**
+ * bootretry_reset_cmd_timeout() - reset command timeout
+ *
+ * Reset the command timeout so that the user has a fresh start. This is
+ * typically used when input is received from the user.
+ */
+void bootretry_reset_cmd_timeout(void);
+
+/** bootretry_dont_retry() - Indicate that we should not retry the boot */
+void bootretry_dont_retry(void);
+#else
+static inline int bootretry_tstc_timeout(void)
+{
+ return 0;
+}
+
+static inline void bootretry_init_cmd_timeout(void)
+{
+}
+
+static inline void bootretry_reset_cmd_timeout(void)
+{
+}
+
+static inline void bootretry_dont_retry(void)
+{
+}
+
+#endif
+
+#endif
diff --git a/include/cli.h b/include/cli.h
new file mode 100644
index 0000000..6994262
--- /dev/null
+++ b/include/cli.h
@@ -0,0 +1,149 @@
+/*
+ * (C) Copyright 2014 Google, Inc
+ * Simon Glass <sjg@chromium.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CLI_H
+#define __CLI_H
+
+/**
+ * Go into the command loop
+ *
+ * This will return if we get a timeout waiting for a command. See
+ * CONFIG_BOOT_RETRY_TIME.
+ */
+void cli_simple_loop(void);
+
+/**
+ * cli_simple_run_command() - Execute a command with the simple CLI
+ *
+ * @cmd: String containing the command to execute
+ * @flag Flag value - see CMD_FLAG_...
+ * @return 1 - command executed, repeatable
+ * 0 - command executed but not repeatable, interrupted commands are
+ * always considered not repeatable
+ * -1 - not executed (unrecognized, bootd recursion or too many args)
+ * (If cmd is NULL or "" or longer than CONFIG_SYS_CBSIZE-1 it is
+ * considered unrecognized)
+ */
+int cli_simple_run_command(const char *cmd, int flag);
+
+/**
+ * cli_simple_run_command_list() - Execute a list of command
+ *
+ * The commands should be separated by ; or \n and will be executed
+ * by the built-in parser.
+ *
+ * This function cannot take a const char * for the command, since if it
+ * finds newlines in the string, it replaces them with \0.
+ *
+ * @param cmd String containing list of commands
+ * @param flag Execution flags (CMD_FLAG_...)
+ * @return 0 on success, or != 0 on error.
+ */
+int cli_simple_run_command_list(char *cmd, int flag);
+
+/**
+ * cli_readline() - read a line into the console_buffer
+ *
+ * This is a convenience function which calls cli_readline_into_buffer().
+ *
+ * @prompt: Prompt to display
+ * @return command line length excluding terminator, or -ve on error
+ */
+int cli_readline(const char *const prompt);
+
+/**
+ * readline_into_buffer() - read a line into a buffer
+ *
+ * Display the prompt, then read a command line into @buffer. The
+ * maximum line length is CONFIG_SYS_CBSIZE including a \0 terminator, which
+ * will always be added.
+ *
+ * The command is echoed as it is typed. Command editing is supported if
+ * CONFIG_CMDLINE_EDITING is defined. Tab auto-complete is supported if
+ * CONFIG_AUTO_COMPLETE is defined. If CONFIG_BOOT_RETRY_TIME is defined,
+ * then a timeout will be applied.
+ *
+ * If CONFIG_BOOT_RETRY_TIME is defined and retry_time >= 0,
+ * time out when time goes past endtime (timebase time in ticks).
+ *
+ * @prompt: Prompt to display
+ * @buffer: Place to put the line that is entered
+ * @timeout: Timeout in milliseconds, 0 if none
+ * @return command line length excluding terminator, or -ve on error: of the
+ * timeout is exceeded (either CONFIG_BOOT_RETRY_TIME or the timeout
+ * parameter), then -2 is returned. If a break is detected (Ctrl-C) then
+ * -1 is returned.
+ */
+int cli_readline_into_buffer(const char *const prompt, char *buffer,
+ int timeout);
+
+/**
+ * parse_line() - split a command line down into separate arguments
+ *
+ * The argv[] array is filled with pointers into @line, and each argument
+ * is terminated by \0 (i.e. @line is changed in the process unless there
+ * is only one argument).
+ *
+ * #argv is terminated by a NULL after the last argument pointer.
+ *
+ * At most CONFIG_SYS_MAXARGS arguments are permited - if there are more
+ * than that then an error is printed, and this function returns
+ * CONFIG_SYS_MAXARGS, with argv[] set up to that point.
+ *
+ * @line: Command line to parse
+ * @args: Array to hold arguments
+ * @return number of arguments
+ */
+int cli_simple_parse_line(char *line, char *argv[]);
+
+#ifdef CONFIG_OF_CONTROL
+/**
+ * cli_process_fdt() - process the boot command from the FDT
+ *
+ * If bootcmmd is defined in the /config node of the FDT, we use that
+ * as the boot command. Further, if bootsecure is set to 1 (in the same
+ * node) then we return true, indicating that the command should be executed
+ * as securely as possible, avoiding the CLI parser.
+ *
+ * @cmdp: On entry, the command that will be executed if the FDT does
+ * not have a command. Returns the command to execute after
+ * checking the FDT.
+ * @return true to execute securely, else false
+ */
+bool cli_process_fdt(const char **cmdp);
+
+/** cli_secure_boot_cmd() - execute a command as securely as possible
+ *
+ * This avoids using the parser, thus executing the command with the
+ * smallest amount of code. Parameters are not supported.
+ */
+void cli_secure_boot_cmd(const char *cmd);
+#else
+static inline bool cli_process_fdt(const char **cmdp)
+{
+ return false;
+}
+
+static inline void cli_secure_boot_cmd(const char *cmd)
+{
+}
+#endif /* CONFIG_OF_CONTROL */
+
+/**
+ * Go into the command loop
+ *
+ * This will return if we get a timeout waiting for a command, but only for
+ * the simple parser (not hush). See CONFIG_BOOT_RETRY_TIME.
+ */
+void cli_loop(void);
+
+/** Set up the command line interpreter ready for action */
+void cli_init(void);
+
+#define endtick(seconds) (get_ticks() + (uint64_t)(seconds) * get_tbclk())
+
+#endif
diff --git a/include/hush.h b/include/cli_hush.h
index 595303a..4951eef 100644
--- a/include/hush.h
+++ b/include/cli_hush.h
@@ -5,8 +5,8 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#ifndef _HUSH_H_
-#define _HUSH_H_
+#ifndef _CLI_HUSH_H_
+#define _CLI_HUSH_H_
#define FLAG_EXIT_FROM_LOOP 1
#define FLAG_PARSE_SEMICOLON (1 << 1) /* symbol ';' is special for parser */
diff --git a/include/command.h b/include/command.h
index d3f700f..6f06db1 100644
--- a/include/command.h
+++ b/include/command.h
@@ -11,7 +11,6 @@
#ifndef __COMMAND_H
#define __COMMAND_H
-#include <config.h>
#include <linker_lists.h>
#ifndef NULL
diff --git a/include/common.h b/include/common.h
index 232136c..82c0a5a 100644
--- a/include/common.h
+++ b/include/common.h
@@ -28,10 +28,8 @@ typedef volatile unsigned char vu_char;
#endif
#if defined(CONFIG_8xx)
#include <asm/8xx_immap.h>
-#if defined(CONFIG_MPC852) || defined(CONFIG_MPC852T) || \
- defined(CONFIG_MPC859) || defined(CONFIG_MPC859T) || \
- defined(CONFIG_MPC859DSL) || \
- defined(CONFIG_MPC866) || defined(CONFIG_MPC866T) || \
+#if defined(CONFIG_MPC859) || defined(CONFIG_MPC859T) || \
+ defined(CONFIG_MPC866) || \
defined(CONFIG_MPC866P)
# define CONFIG_MPC866_FAMILY 1
#elif defined(CONFIG_MPC870) \
@@ -54,8 +52,6 @@ typedef volatile unsigned char vu_char;
#include <asm/immap_512x.h>
#elif defined(CONFIG_MPC8260)
#if defined(CONFIG_MPC8247) \
- || defined(CONFIG_MPC8248) \
- || defined(CONFIG_MPC8271) \
|| defined(CONFIG_MPC8272)
#define CONFIG_MPC8272_FAMILY 1
#endif
@@ -273,6 +269,7 @@ int print_buffer(ulong addr, const void *data, uint width, uint count,
/* common/main.c */
void main_loop (void);
int run_command(const char *cmd, int flag);
+int run_command_repeatable(const char *cmd, int flag);
/**
* Run a list of commands separated by ; or even \0
@@ -286,12 +283,6 @@ int run_command(const char *cmd, int flag);
* @return 0 on success, or != 0 on error.
*/
int run_command_list(const char *cmd, int len, int flag);
-int readline (const char *const prompt);
-int readline_into_buffer(const char *const prompt, char *buffer,
- int timeout);
-int parse_line (char *, char *[]);
-void init_cmd_timeout(void);
-void reset_cmd_timeout(void);
extern char console_buffer[];
/* arch/$(ARCH)/lib/board.c */
@@ -305,6 +296,7 @@ extern ulong monitor_flash_len;
int mac_read_from_eeprom(void);
extern u8 __dtb_dt_begin[]; /* embedded device tree blob */
int set_cpu_clk_info(void);
+int mdm_init(void);
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo(void);
#else
@@ -505,8 +497,6 @@ extern ssize_t spi_read (uchar *, int, uchar *, int);
extern ssize_t spi_write (uchar *, int, uchar *, int);
#endif
-void rpxlite_init (void);
-
#ifdef CONFIG_HERMES
/* $(BOARD)/hermes.c */
void hermes_start_lxt980 (int speed);
@@ -693,9 +683,6 @@ ulong get_PERCLK3(void);
ulong get_bus_freq (ulong);
int get_serial_clock(void);
-#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx)
-ulong get_ddr_freq(ulong);
-#endif
#if defined(CONFIG_MPC85xx)
typedef MPC85xx_SYS_INFO sys_info_t;
void get_sys_info ( sys_info_t * );
@@ -711,6 +698,8 @@ static inline ulong get_ddr_freq(ulong dummy)
{
return get_bus_freq(dummy);
}
+#else
+ulong get_ddr_freq(ulong);
#endif
#if defined(CONFIG_4xx)
diff --git a/include/commproc.h b/include/commproc.h
index 29a3e61..52ac4ca 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -531,45 +531,6 @@ typedef struct scc_enet {
#endif
-/*** FADS860T********************************************************/
-
-#if defined(CONFIG_FADS) && defined(CONFIG_MPC86x)
-/*
- * This ENET stuff is for the MPC86xFADS/MPC8xxADS with ethernet on SCC1.
- */
-#ifdef CONFIG_SCC1_ENET
-
-#define SCC_ENET 0
-
-#define PROFF_ENET PROFF_SCC1
-#define CPM_CR_ENET CPM_CR_CH_SCC1
-
-#define PA_ENET_RXD ((ushort)0x0001)
-#define PA_ENET_TXD ((ushort)0x0002)
-#define PA_ENET_TCLK ((ushort)0x0100)
-#define PA_ENET_RCLK ((ushort)0x0200)
-
-#define PB_ENET_TENA ((uint)0x00001000)
-
-#define PC_ENET_CLSN ((ushort)0x0010)
-#define PC_ENET_RENA ((ushort)0x0020)
-
-#define SICR_ENET_MASK ((uint)0x000000ff)
-#define SICR_ENET_CLKRT ((uint)0x0000002c)
-
-#endif /* CONFIG_SCC1_ETHERNET */
-
-/*
- * This ENET stuff is for the MPC860TFADS/MPC86xADS/MPC885ADS
- * with ethernet on FEC.
- */
-
-#ifdef CONFIG_FEC_ENET
-#define FEC_ENET /* Use FEC for Ethernet */
-#endif /* CONFIG_FEC_ENET */
-
-#endif /* CONFIG_FADS && CONFIG_MPC86x */
-
/*** FPS850L, FPS860L ************************************************/
#if defined(CONFIG_FPS850L) || defined(CONFIG_FPS860L)
@@ -900,86 +861,6 @@ typedef struct scc_enet {
#endif /* CONFIG_NETVIA */
-/*** QS850/QS823 ***************************************************/
-
-#if defined(CONFIG_QS850) || defined(CONFIG_QS823)
-#undef FEC_ENET /* Don't use FEC for EThernet */
-
-#define PROFF_ENET PROFF_SCC2
-#define CPM_CR_ENET CPM_CR_CH_SCC2
-#define SCC_ENET 1
-
-#define PA_ENET_RXD ((ushort)0x0004) /* RXD on PA13 (Pin D9) */
-#define PA_ENET_TXD ((ushort)0x0008) /* TXD on PA12 (Pin D7) */
-#define PC_ENET_RENA ((ushort)0x0080) /* RENA on PC8 (Pin D12) */
-#define PC_ENET_CLSN ((ushort)0x0040) /* CLSN on PC9 (Pin C12) */
-#define PA_ENET_TCLK ((ushort)0x0200) /* TCLK on PA6 (Pin D8) */
-#define PA_ENET_RCLK ((ushort)0x0800) /* RCLK on PA4 (Pin D10) */
-#define PB_ENET_TENA ((uint)0x00002000) /* TENA on PB18 (Pin D11) */
-#define PC_ENET_LBK ((ushort)0x0010) /* Loopback control on PC11 (Pin B14) */
-#define PC_ENET_LI ((ushort)0x0020) /* Link Integrity control PC10 (A15) */
-#define PC_ENET_SQE ((ushort)0x0100) /* SQE Disable control PC7 (B15) */
-
-/* SCC2 TXCLK from CLK2
- * SCC2 RXCLK from CLK4
- * SCC2 Connected to NMSI */
-#define SICR_ENET_MASK ((uint)0x00007F00)
-#define SICR_ENET_CLKRT ((uint)0x00003D00)
-
-#endif /* CONFIG_QS850/QS823 */
-
-/*** QS860T ***************************************************/
-
-#ifdef CONFIG_QS860T
-#ifdef CONFIG_FEC_ENET
-#define FEC_ENET /* use FEC for EThernet */
-#endif /* CONFIG_FEC_ETHERNET */
-
-/* This ENET stuff is for GTH 10 Mbit ( SCC ) */
-#define PROFF_ENET PROFF_SCC1
-#define CPM_CR_ENET CPM_CR_CH_SCC1
-#define SCC_ENET 0
-
-#define PA_ENET_RXD ((ushort)0x0001) /* PA15 */
-#define PA_ENET_TXD ((ushort)0x0002) /* PA14 */
-#define PA_ENET_TCLK ((ushort)0x0800) /* PA4 */
-#define PA_ENET_RCLK ((ushort)0x0200) /* PA6 */
-#define PB_ENET_TENA ((uint)0x00001000) /* PB19 */
-#define PC_ENET_CLSN ((ushort)0x0010) /* PC11 */
-#define PC_ENET_RENA ((ushort)0x0020) /* PC10 */
-
-#define SICR_ENET_MASK ((uint)0x000000ff)
-/* RCLK PA4 -->CLK4, TCLK PA6 -->CLK2 */
-#define SICR_ENET_CLKRT ((uint)0x0000003D)
-
-#endif /* CONFIG_QS860T */
-
-/*** RPXLITE ********************************************************/
-
-#ifdef CONFIG_RPXLITE
-/* This ENET stuff is for the MPC850 with ethernet on SCC2. Some of
- * this may be unique to the RPX-Lite configuration.
- * Note TENA is on Port B.
- */
-#define PROFF_ENET PROFF_SCC2
-#define CPM_CR_ENET CPM_CR_CH_SCC2
-#define SCC_ENET 1
-#define PA_ENET_RXD ((ushort)0x0004)
-#define PA_ENET_TXD ((ushort)0x0008)
-#define PA_ENET_TCLK ((ushort)0x0200)
-#define PA_ENET_RCLK ((ushort)0x0800)
-#if defined(CONFIG_RMU)
-#define PC_ENET_TENA ((uint)0x00000002) /* PC14 */
-#else
-#define PB_ENET_TENA ((uint)0x00002000)
-#endif
-#define PC_ENET_CLSN ((ushort)0x0040)
-#define PC_ENET_RENA ((ushort)0x0080)
-
-#define SICR_ENET_MASK ((uint)0x0000ff00)
-#define SICR_ENET_CLKRT ((uint)0x00003d00)
-#endif /* CONFIG_RPXLITE */
-
/*** SM850 *********************************************************/
/* The SM850 Service Module uses SCC2 for IrDA and SCC3 for Ethernet */
@@ -1048,7 +929,7 @@ typedef struct scc_enet {
/*** MVS1, TQM823L/M, TQM850L/M, TQM885D, R360MPI **********/
#if (defined(CONFIG_MVS) && CONFIG_MVS < 2) || \
- defined(CONFIG_R360MPI) || defined(CONFIG_RBC823) || \
+ defined(CONFIG_R360MPI) || \
defined(CONFIG_RRVISION)|| defined(CONFIG_TQM823L) || \
defined(CONFIG_TQM823M) || defined(CONFIG_TQM850L) || \
defined(CONFIG_TQM850M) || defined(CONFIG_TQM885D) || \
@@ -1142,29 +1023,6 @@ typedef struct scc_enet {
# endif /* CONFIG_FEC_ENET */
#endif /* CONFIG_TQM855L/M, TQM860L/M, TQM862L/M */
-/*** V37 **********************************************************/
-
-#ifdef CONFIG_V37
-/* This ENET stuff is for the MPC823 with ethernet on SCC2. Some of
- * this may be unique to the Marel V37 configuration.
- * Note TENA is on Port B.
- */
-#define PROFF_ENET PROFF_SCC2
-#define CPM_CR_ENET CPM_CR_CH_SCC2
-#define SCC_ENET 1
-#define PA_ENET_RXD ((ushort)0x0004)
-#define PA_ENET_TXD ((ushort)0x0008)
-#define PA_ENET_TCLK ((ushort)0x0400)
-#define PA_ENET_RCLK ((ushort)0x0200)
-#define PB_ENET_TENA ((uint)0x00002000)
-#define PC_ENET_CLSN ((ushort)0x0040)
-#define PC_ENET_RENA ((ushort)0x0080)
-
-#define SICR_ENET_MASK ((uint)0x0000ff00)
-#define SICR_ENET_CLKRT ((uint)0x00002e00)
-#endif /* CONFIG_V37 */
-
-
/*********************************************************************/
/* SCC Event register as used by Ethernet.
diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h
index b304a41..76818f6 100644
--- a/include/config_fallbacks.h
+++ b/include/config_fallbacks.h
@@ -83,4 +83,12 @@
#define CONFIG_SYS_HZ 1000
#endif
+#ifndef CONFIG_FIT_SIGNATURE
+#define CONFIG_IMAGE_FORMAT_LEGACY
+#endif
+
+#ifdef CONFIG_DISABLE_IMAGE_LEGACY
+#undef CONFIG_IMAGE_FORMAT_LEGACY
+#endif
+
#endif /* __CONFIG_FALLBACKS_H */
diff --git a/include/configs/Adder.h b/include/configs/Adder.h
deleted file mode 100644
index 140f443..0000000
--- a/include/configs/Adder.h
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * Copyright (C) 2004-2005 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- *
- * Support for Analogue&Micro Adder boards family.
- * Tested on AdderII and Adder87x.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#if !defined(CONFIG_MPC875) && !defined(CONFIG_MPC852T)
-#define CONFIG_MPC875
-#endif
-
-#define CONFIG_ADDER /* Analogue&Micro Adder board */
-
-#define CONFIG_SYS_TEXT_BASE 0xFE000000
-
-#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#define CONFIG_BAUDRATE 38400
-
-#define CONFIG_ETHER_ON_FEC1
-#define CONFIG_ETHER_ON_FEC2
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-
-#if defined(CONFIG_ETHER_ON_FEC1) || defined(CONFIG_ETHER_ON_FEC2)
-#define CONFIG_SYS_DISCOVER_PHY
-#define CONFIG_MII_INIT 1
-#define FEC_ENET
-#endif /* CONFIG_ETHER_ON_FEC || CONFIG_ETHER_ON_FEC2 */
-
-#define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */
-#define CONFIG_8xx_CPUCLK_DEFAULT 50000000
-#define CONFIG_SYS_8xx_CPUCLK_MIN 40000000
-#ifdef CONFIG_MPC852T
-#define CONFIG_SYS_8xx_CPUCLK_MAX 50000000
-#else
-#define CONFIG_SYS_8xx_CPUCLK_MAX 133000000
-#endif /* CONFIG_MPC852T */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds */
-#define CONFIG_BOOTCOMMAND "bootm fe040000" /* Autoboot command */
-#define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw mtdparts=1M(ROM)ro,-(root)"
-
-#define CONFIG_BZIP2 /* Include support for bzip2 compressed images */
-#undef CONFIG_WATCHDOG /* Disable platform specific watchdog */
-
-/*-----------------------------------------------------------------------
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP /* #undef to save memory */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* Max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_LOAD_ADDR 0x400000 /* Default load address */
-
-/*-----------------------------------------------------------------------
- * RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero)
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_SDRAM_MAX_SIZE 0x01000000 /* Up to 16 Mbyte */
-
-#define CONFIG_SYS_MAMR 0x00002114
-
-/*
- * 4096 Up to 4096 SDRAM rows
- * 1000 factor s -> ms
- * 32 PTP (pre-divider from MPTPR)
- * 4 Number of refresh cycles per period
- * 64 Refresh cycle in ms per number of rows
- */
-#define CONFIG_SYS_PTA_PER_CLK ((4096 * 32 * 1000) / (4 * 64))
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00500000 /* 1 ... 5 MB in SDRAM */
-
-#define CONFIG_SYS_RESET_ADDRESS 0x09900000
-
-/*-----------------------------------------------------------------------
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 KB for Monitor */
-#ifdef CONFIG_BZIP2
-#define CONFIG_SYS_MALLOC_LEN (2500 << 10) /* Reserve ~2.5 MB for malloc() */
-#else
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */
-#endif /* CONFIG_BZIP2 */
-
-/*-----------------------------------------------------------------------
- * Flash organisation
- */
-#define CONFIG_SYS_FLASH_BASE 0xFE000000
-#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
-#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max num of sects on one chip */
-
-/* Environment is in flash */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SECT_SIZE 0x10000 /* We use one complete sector */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_SYS_OR0_PRELIM 0xFF000774
-#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BR_PS_16 | BR_MS_GPCM | BR_V)
-
-#define CONFIG_SYS_DIRECT_FLASH_TFTP
-
-/*-----------------------------------------------------------------------
- * Internal Memory Map Register
- */
-#define CONFIG_SYS_IMMR 0xFF000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Configuration registers
- */
-#ifdef CONFIG_WATCHDOG
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | \
- SYPCR_SWF | SYPCR_SWE | SYPCR_SWRI | \
- SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | \
- SYPCR_SWF | SYPCR_SWP)
-#endif /* CONFIG_WATCHDOG */
-
-#define CONFIG_SYS_SIUMCR (SIUMCR_MLRC01 | SIUMCR_DBGC11)
-
-/* TBSCR - Time Base Status and Control Register */
-#define CONFIG_SYS_TBSCR (TBSCR_TBF | TBSCR_TBE)
-
-/* PISCR - Periodic Interrupt Status and Control */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/* PLPRCR - PLL, Low-Power, and Reset Control Register */
-/* #define CONFIG_SYS_PLPRCR PLPRCR_TEXPS */
-
-/* SCCR - System Clock and reset Control Register */
-#define SCCR_MASK SCCR_EBDF11
-#define CONFIG_SYS_SCCR SCCR_RTSEL
-
-#define CONFIG_SYS_DER 0
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx chips */
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT 1
-#define CONFIG_OF_BOARD_SETUP 1
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/HIDDEN_DRAGON.h b/include/configs/HIDDEN_DRAGON.h
deleted file mode 100644
index e0a233b..0000000
--- a/include/configs/HIDDEN_DRAGON.h
+++ /dev/null
@@ -1,371 +0,0 @@
-/*
- * (C) Copyright 2004
- * Yusdi Santoso, Adaptec Inc., yusdi_santoso@adaptec.com
- *
- * (C) Copyright 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC8245 1
-#define CONFIG_HIDDEN_DRAGON 1
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-
-#if 0
-#define USE_DINK32 1
-#else
-#undef USE_DINK32
-#endif
-
-#define CONFIG_CONS_INDEX 3 /* set to '3' for on-chip DUART */
-#define CONFIG_BAUDRATE 9600
-#define CONFIG_DRAM_SPEED 100 /* MHz */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
-#undef CONFIG_PCI_PNP
-
-
-#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
-
-#define PCI_ENET0_IOADDR 0x80000000
-#define PCI_ENET0_MEMADDR 0x80000000
-#define PCI_ENET1_IOADDR 0x81000000
-#define PCI_ENET1_MEMADDR 0x81000000
-
-#define CONFIG_RTL8139
-
-/* Make sure the ethaddr can be overwritten
- TODO: Remove this on final product
-*/
-#define CONFIG_ENV_OVERWRITE
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_MAX_RAM_SIZE 0x02000000
-
-#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
-
-#if defined (USE_DINK32)
-#define CONFIG_SYS_MONITOR_LEN 0x00030000
-#define CONFIG_SYS_MONITOR_BASE 0x00090000
-#define CONFIG_SYS_RAMBOOT 1
-#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#else
-#undef CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_MONITOR_LEN 0x00030000
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
-
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-#endif
-
-#define CONFIG_SYS_FLASH_BASE 0xFFE00000
-#define CONFIG_SYS_FLASH_SIZE (2 * 1024 * 1024) /* Unity has onboard 1MByte flash */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET 0x00004000 /* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE 0x00002000 /* Total Size of Environment Sector */
-
-#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */
-
-#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */
-
-#define CONFIG_SYS_EUMB_ADDR 0xFC000000
-
-#define CONFIG_SYS_ISA_MEM 0xFD000000
-#define CONFIG_SYS_ISA_IO 0xFE000000
-
-#define CONFIG_SYS_FLASH_RANGE_BASE 0xFFE00000 /* flash memory address range */
-#define CONFIG_SYS_FLASH_RANGE_SIZE 0x00200000
-#define FLASH_BASE0_PRELIM 0xFFE00000 /* processor board flash */
-
-/*
- * select i2c support configuration
- *
- * Supported configurations are {none, software, hardware} drivers.
- * If the software driver is chosen, there are some additional
- * configuration items that the driver uses to drive the port pins.
- */
-#define CONFIG_HARD_I2C 1 /* To enable I2C support */
-#undef CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
-#ifdef CONFIG_SYS_I2C_SOFT
-#error "Soft I2C is not configured properly. Please review!"
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT_SPEED 50000
-#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
-#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
-#define I2C_ACTIVE (iop->pdir |= 0x00010000)
-#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
-#define I2C_READ ((iop->pdat & 0x00010000) != 0)
-#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \
- else iop->pdat &= ~0x00010000
-#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \
- else iop->pdat &= ~0x00020000
-#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SYS_I2C_SOFT */
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 /* EEPROM IS24C02 */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-
-#define CONFIG_SYS_FLASH_BANKS { FLASH_BASE0_PRELIM }
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-
-
-/* #define CONFIG_WINBOND_83C553 1 / *has a winbond bridge */
-#define CONFIG_SYS_USE_WINBOND_IDE 0 /*use winbond 83c553 internal IDE ctrlr */
-#define CONFIG_SYS_WINBOND_ISA_CFG_ADDR 0x80005800 /*pci-isa bridge config addr */
-#define CONFIG_SYS_WINBOND_IDE_CFG_ADDR 0x80005900 /*ide config addr */
-
-#define CONFIG_SYS_IDE_MAXBUS 2 /* max. 2 IDE busses */
-#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
-
-/* TODO: Change this to VIA686A */
-
-/*
- * NS87308 Configuration
- */
-#define CONFIG_NS87308 /* Nat Semi super-io controller on ISA bus */
-
-#define CONFIG_SYS_NS87308_BADDR_10 1
-
-#define CONFIG_SYS_NS87308_DEVS ( CONFIG_SYS_NS87308_UART1 | \
- CONFIG_SYS_NS87308_UART2 | \
- CONFIG_SYS_NS87308_POWRMAN | \
- CONFIG_SYS_NS87308_RTC_APC )
-
-#undef CONFIG_SYS_NS87308_PS2MOD
-
-#define CONFIG_SYS_NS87308_CS0_BASE 0x0076
-#define CONFIG_SYS_NS87308_CS0_CONF 0x30
-#define CONFIG_SYS_NS87308_CS1_BASE 0x0075
-#define CONFIG_SYS_NS87308_CS1_CONF 0x30
-#define CONFIG_SYS_NS87308_CS2_BASE 0x0074
-#define CONFIG_SYS_NS87308_CS2_CONF 0x30
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-
-#if (CONFIG_CONS_INDEX > 2)
-#define CONFIG_SYS_NS16550_CLK CONFIG_DRAM_SPEED*1000000
-#else
-#define CONFIG_SYS_NS16550_CLK 1843200
-#endif
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART1_BASE)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART2_BASE)
-#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_EUMB_ADDR + 0x4500)
-#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_EUMB_ADDR + 0x4600)
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
-
-#define CONFIG_SYS_ROMNAL 7 /*rom/flash next access time */
-#define CONFIG_SYS_ROMFAL 11 /*rom/flash access time */
-
-#define CONFIG_SYS_REFINT 430 /* no of clock cycles between CBR refresh cycles */
-
-/* the following are for SDRAM only*/
-#define CONFIG_SYS_BSTOPRE 121 /* Burst To Precharge, sets open page interval */
-#define CONFIG_SYS_REFREC 8 /* Refresh to activate interval */
-#define CONFIG_SYS_RDLAT 4 /* data latency from read command */
-#define CONFIG_SYS_PRETOACT 3 /* Precharge to activate interval */
-#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval */
-#define CONFIG_SYS_ACTORW 3 /* Activate to R/W */
-#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */
-#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */
-#if 0
-#define CONFIG_SYS_SDMODE_BURSTLEN 2 /* OBSOLETE! SDMODE Burst length 2=4, 3=8 */
-#endif
-
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
-#define CONFIG_SYS_EXTROM 1
-#define CONFIG_SYS_REGDIMM 0
-
-
-/* memory bank settings*/
-/*
- * only bits 20-29 are actually used from these vales to set the
- * start/end address the upper two bits will be 0, and the lower 20
- * bits will be set to 0x00000 for a start address, or 0xfffff for an
- * end address
- */
-#define CONFIG_SYS_BANK0_START 0x00000000
-#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1)
-#define CONFIG_SYS_BANK0_ENABLE 1
-#define CONFIG_SYS_BANK1_START 0x3ff00000
-#define CONFIG_SYS_BANK1_END 0x3fffffff
-#define CONFIG_SYS_BANK1_ENABLE 0
-#define CONFIG_SYS_BANK2_START 0x3ff00000
-#define CONFIG_SYS_BANK2_END 0x3fffffff
-#define CONFIG_SYS_BANK2_ENABLE 0
-#define CONFIG_SYS_BANK3_START 0x3ff00000
-#define CONFIG_SYS_BANK3_END 0x3fffffff
-#define CONFIG_SYS_BANK3_ENABLE 0
-#define CONFIG_SYS_BANK4_START 0x00000000
-#define CONFIG_SYS_BANK4_END 0x00000000
-#define CONFIG_SYS_BANK4_ENABLE 0
-#define CONFIG_SYS_BANK5_START 0x00000000
-#define CONFIG_SYS_BANK5_END 0x00000000
-#define CONFIG_SYS_BANK5_ENABLE 0
-#define CONFIG_SYS_BANK6_START 0x00000000
-#define CONFIG_SYS_BANK6_END 0x00000000
-#define CONFIG_SYS_BANK6_ENABLE 0
-#define CONFIG_SYS_BANK7_START 0x00000000
-#define CONFIG_SYS_BANK7_END 0x00000000
-#define CONFIG_SYS_BANK7_ENABLE 0
-/*
- * Memory bank enable bitmask, specifying which of the banks defined above
- are actually present. MSB is for bank #7, LSB is for bank #0.
- */
-#define CONFIG_SYS_BANK_ENABLE 0x01
-
-#define CONFIG_SYS_ODCR 0xff /* configures line driver impedances, */
- /* see 8240 book for bit definitions */
-#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 retains the */
- /* currently accessed page in memory */
- /* see 8240 book for details */
-
-/* SDRAM 0 - 256MB */
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* stack in DCACHE @ 1GB (no backing mem) */
-#if defined(USE_DINK32)
-#define CONFIG_SYS_IBAT1L (0x40000000 | BATL_PP_00 )
-#define CONFIG_SYS_IBAT1U (0x40000000 | BATU_BL_128K )
-#else
-#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#endif
-
-/* PCI memory */
-#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* Flash, config addrs, etc */
-#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 36 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8240 CPU */
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/* values according to the manual */
-#define CONFIG_DRAM_50MHZ 1
-#define CONFIG_SDRAM_50MHZ
-
-#undef NR_8259_INTS
-#define NR_8259_INTS 1
-
-#define CONFIG_DISK_SPINUP_TIME 1000000
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h
deleted file mode 100644
index a2fdfd3..0000000
--- a/include/configs/ISPAN.h
+++ /dev/null
@@ -1,330 +0,0 @@
-/*
- * Copyright (C) 2004 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- *
- * Support for Interphase iSPAN Communications Controllers
- * (453x and others). Tested on 4532.
- *
- * Derived from iSPAN 4539 port (iphase4539) by
- * Wolfgang Grandegger <wg@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_ISPAN /* ...on one of Interphase iSPAN boards */
-#define CONFIG_CPM2 1 /* Has a CPM2 */
-
-#define CONFIG_SYS_TEXT_BASE 0xFE7A0000
-
-/*-----------------------------------------------------------------------
- * Select serial console configuration
- *
- * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- *
- * If CONFIG_CONS_NONE is defined, then the serial console routines must be
- * defined elsewhere (for example, on the cogent platform, there are serial
- * ports on the motherboard which are used for the serial console - see
- * cogent/cma101/serial.[ch]).
- */
-#define CONFIG_CONS_ON_SMC /* Define if console on SMC */
-#undef CONFIG_CONS_ON_SCC /* Define if console on SCC */
-#undef CONFIG_CONS_NONE /* Define if console on something else */
-#define CONFIG_CONS_INDEX 1 /* Which serial channel for console */
-
-/*-----------------------------------------------------------------------
- * Select Ethernet configuration
- *
- * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
- * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
- * for FCC).
- *
- * If CONFIG_ETHER_NONE is defined, then either the Ethernet routines must
- * be defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
- */
-#undef CONFIG_ETHER_ON_SCC /* Define if Ethernet on SCC */
-#define CONFIG_ETHER_ON_FCC /* Define if Ethernet on FCC */
-#undef CONFIG_ETHER_NONE /* Define if Ethernet on something else */
-#define CONFIG_ETHER_INDEX 3 /* Which channel for Ethernrt */
-
-#ifdef CONFIG_ETHER_ON_FCC
-
-#if CONFIG_ETHER_INDEX == 3
-
-#define CONFIG_SYS_PHY_ADDR 0
-#define CONFIG_SYS_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK14 | CMXFCR_TF3CS_CLK16)
-#define CONFIG_SYS_CMXFCR_MASK3 (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
-
-#endif /* CONFIG_ETHER_INDEX == 3 */
-
-#define CONFIG_SYS_CPMFCR_RAMTYPE 0
-#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
-
-#define CONFIG_MII /* MII PHY management */
-#define CONFIG_BITBANGMII /* Bit-bang MII PHY management */
-/*
- * GPIO pins used for bit-banged MII communications
- */
-#define MDIO_PORT 3 /* Port D */
-#define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \
- (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
-#define MDC_DECLARE MDIO_DECLARE
-
-
-#define CONFIG_SYS_MDIO_PIN 0x00040000 /* PD13 */
-#define CONFIG_SYS_MDC_PIN 0x00080000 /* PD12 */
-
-#define MDIO_ACTIVE (iop->pdir |= CONFIG_SYS_MDIO_PIN)
-#define MDIO_TRISTATE (iop->pdir &= ~CONFIG_SYS_MDIO_PIN)
-#define MDIO_READ ((iop->pdat & CONFIG_SYS_MDIO_PIN) != 0)
-
-#define MDIO(bit) if(bit) iop->pdat |= CONFIG_SYS_MDIO_PIN; \
- else iop->pdat &= ~CONFIG_SYS_MDIO_PIN
-
-#define MDC(bit) if(bit) iop->pdat |= CONFIG_SYS_MDC_PIN; \
- else iop->pdat &= ~CONFIG_SYS_MDC_PIN
-
-#define MIIDELAY udelay(1)
-
-#endif /* CONFIG_ETHER_ON_FCC */
-
-#define CONFIG_8260_CLKIN 65536000 /* in Hz */
-#define CONFIG_BAUDRATE 38400
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_REGINFO
-
-
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#define CONFIG_BOOTCOMMAND "bootm fe010000" /* autoboot command */
-#define CONFIG_BOOTARGS "root=/dev/ram rw"
-
-#define CONFIG_BZIP2 /* Include support for bzip2 compressed images */
-#undef CONFIG_WATCHDOG /* Disable platform specific watchdog */
-
-/*-----------------------------------------------------------------------
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP /* #undef to save memory */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* Max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x03B00000 /* 1 ... 59 MB in SDRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* Default load address */
-
-#define CONFIG_SYS_RESET_ADDRESS 0x09900000
-
-#define CONFIG_MISC_INIT_R /* We need misc_init_r() */
-
-/*-----------------------------------------------------------------------
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#ifdef CONFIG_BZIP2
-#define CONFIG_SYS_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */
-#else
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */
-#endif /* CONFIG_BZIP2 */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_FLASH_BASE 0xFE000000
-#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
-#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max num of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 142 /* Max num of sects on one chip */
-
-/* Environment is in flash, there is little space left in Serial EEPROM */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SECT_SIZE 0x10000 /* We use one complete sector */
-#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
-
-/*-----------------------------------------------------------------------
- * Hard Reset Configuration Words
- *
- * If you change bits in the HRCW, you must also change the CONFIG_SYS_*
- * defines for the various registers affected by the HRCW e.g. changing
- * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
- */
-/* 0x1686B245 */
-#define CONFIG_SYS_HRCW_MASTER (HRCW_EBM | HRCW_BPS01 | HRCW_CIP |\
- HRCW_L2CPC10 | HRCW_ISB110 |\
- HRCW_BMS | HRCW_MMR11 | HRCW_APPC10 |\
- HRCW_CS10PC01 | HRCW_MODCK_H0101 \
- )
-/* No slaves */
-#define CONFIG_SYS_HRCW_SLAVE1 0
-#define CONFIG_SYS_HRCW_SLAVE2 0
-#define CONFIG_SYS_HRCW_SLAVE3 0
-#define CONFIG_SYS_HRCW_SLAVE4 0
-#define CONFIG_SYS_HRCW_SLAVE5 0
-#define CONFIG_SYS_HRCW_SLAVE6 0
-#define CONFIG_SYS_HRCW_SLAVE7 0
-
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xF0F00000
-#ifdef CONFIG_SYS_REV_B
-#define CONFIG_SYS_DEFAULT_IMMR 0xFF000000
-#endif /* CONFIG_SYS_REV_B */
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-
-/*-----------------------------------------------------------------------
- * HIDx - Hardware Implementation-dependent Registers 2-11
- *-----------------------------------------------------------------------
- * HID0 also contains cache control.
- *
- * HID1 has only read-only information - nothing to set.
- */
-#define CONFIG_SYS_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
- HID0_IFEM|HID0_ABE)
-#define CONFIG_SYS_HID0_FINAL (HID0_ICE|HID0_IFEM|HID0_ABE)
-#define CONFIG_SYS_HID2 0
-
-/*-----------------------------------------------------------------------
- * RMR - Reset Mode Register 5-5
- *-----------------------------------------------------------------------
- * turn on Checkstop Reset Enable
- */
-#define CONFIG_SYS_RMR RMR_CSRE
-
-/*-----------------------------------------------------------------------
- * BCR - Bus Configuration 4-25
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_BCR 0xA01C0000
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 4-31
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_SIUMCR 0x42250000/* 0x4205C000 */
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 4-35
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
- */
-#if defined (CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
- SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
- SYPCR_SWRI|SYPCR_SWP)
-#endif /* CONFIG_WATCHDOG */
-
-/*-----------------------------------------------------------------------
- * TMCNTSC - Time Counter Status and Control 4-40
- * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
- * and enable Time Counter
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 4-42
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
- * Periodic timer
- */
-#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock Control 9-8
- *-----------------------------------------------------------------------
- * Ensure DFBRG is Divide by 16
- */
-#define CONFIG_SYS_SCCR SCCR_DFBRG01
-
-/*-----------------------------------------------------------------------
- * RCCR - RISC Controller Configuration 13-7
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RCCR 0
-
-/*-----------------------------------------------------------------------
- * Init Memory Controller:
- *
- * Bank Bus Machine PortSize Device
- * ---- --- ------- ----------------------------- ------
- * 0 60x GPCM 8 bit (Rev.B)/16 bit (Rev.D) Flash
- * 1 60x SDRAM 64 bit SDRAM
- * 2 Local SDRAM 32 bit SDRAM
- */
-#define CONFIG_SYS_USE_FIRMWARE /* If defined - do not initialise memory
- controller, rely on initialisation
- performed by the Interphase boot firmware.
- */
-
-#define CONFIG_SYS_OR0_PRELIM 0xFE000882
-#ifdef CONFIG_SYS_REV_B
-#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BRx_PS_8 | BRx_V)
-#else /* Rev. D */
-#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BRx_PS_16 | BRx_V)
-#endif /* CONFIG_SYS_REV_B */
-
-#define CONFIG_SYS_MPTPR 0x7F00
-
-/* Please note that 60x SDRAM MUST start at 0 */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_60x_BR 0x00000041
-#define CONFIG_SYS_60x_OR 0xF0002CD0
-#define CONFIG_SYS_PSDMR 0x0049929A
-#define CONFIG_SYS_PSRT 0x07
-
-#define CONFIG_SYS_LSDRAM_BASE 0xF7000000
-#define CONFIG_SYS_LOC_BR 0x00001861
-#define CONFIG_SYS_LOC_OR 0xFF803280
-#define CONFIG_SYS_LSDMR 0x8285A552
-#define CONFIG_SYS_LSRT 0x07
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
deleted file mode 100644
index 39f7564..0000000
--- a/include/configs/MPC8260ADS.h
+++ /dev/null
@@ -1,549 +0,0 @@
-/*
- * (C) Copyright 2001
- * Stuart Hughes <stuarth@lineo.com>
- * This file is based on similar values for other boards found in other
- * U-Boot config files, and some that I found in the mpc8260ads manual.
- *
- * Note: my board is a PILOT rev.
- * Note: the mpc8260ads doesn't come with a proper Ethernet MAC address.
- *
- * (C) Copyright 2003-2004 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- * Added support for SDRAM DIMMs SPD EEPROM, MII, JFFS2.
- * Ported to PQ2FADS-ZU and PQ2FADS-VR boards.
- * Ported to MPC8272ADS board.
- *
- * Copyright (c) 2005 MontaVista Software, Inc.
- * Vitaly Bordug <vbordug@ru.mvista.com>
- * Added support for PCI bridge on MPC8272ADS
- *
- * Copyright (C) Freescale Semiconductor, Inc. 2006-2009.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC8260ADS 1 /* Motorola PQ2 ADS family board */
-
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000 /* Standard: boot high */
-#endif
-
-#define CONFIG_CPM2 1 /* Has a CPM2 */
-
-/*
- * Figure out if we are booting low via flash HRCW or high via the BCSR.
- */
-#if (CONFIG_SYS_TEXT_BASE != 0xFFF00000) /* Boot low (flash HRCW) */
-# define CONFIG_SYS_LOWBOOT 1
-#endif
-
-/* ADS flavours */
-#define CONFIG_SYS_8260ADS 1 /* MPC8260ADS */
-#define CONFIG_SYS_8266ADS 2 /* MPC8266ADS */
-#define CONFIG_SYS_PQ2FADS 3 /* PQ2FADS-ZU or PQ2FADS-VR */
-#define CONFIG_SYS_8272ADS 4 /* MPC8272ADS */
-
-#ifndef CONFIG_ADSTYPE
-#define CONFIG_ADSTYPE CONFIG_SYS_8260ADS
-#endif /* CONFIG_ADSTYPE */
-
-#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
-#define CONFIG_MPC8272 1
-#elif CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
-/*
- * Actually MPC8275, but the code is littered with ifdefs that
- * apply to both, or which use this ifdef to assume board-specific
- * details. :-(
- */
-#define CONFIG_MPC8272 1
-#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */
-
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
-#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */
-
-/* allow serial and ethaddr to be overwritten */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * select serial console configuration
- *
- * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- *
- * if CONFIG_CONS_NONE is defined, then the serial console routines must
- * defined elsewhere (for example, on the cogent platform, there are serial
- * ports on the motherboard which are used for the serial console - see
- * cogent/cma101/serial.[ch]).
- */
-#undef CONFIG_CONS_ON_SMC /* define if console on SMC */
-#define CONFIG_CONS_ON_SCC /* define if console on SCC */
-#undef CONFIG_CONS_NONE /* define if console on something else */
-#define CONFIG_CONS_INDEX 1 /* which serial channel for console */
-
-/*
- * select ethernet configuration
- *
- * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
- * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
- * for FCC)
- *
- * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
- */
-#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
-#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
-#undef CONFIG_ETHER_NONE /* define if ether on something else */
-
-#ifdef CONFIG_ETHER_ON_FCC
-
-#define CONFIG_ETHER_INDEX 2 /* which SCC/FCC channel for ethernet */
-
-#if CONFIG_ETHER_INDEX == 1
-
-# define CONFIG_SYS_PHY_ADDR 0
-# define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK10)
-# define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
-
-#elif CONFIG_ETHER_INDEX == 2
-
-#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS /* RxCLK is CLK15, TxCLK is CLK16 */
-# define CONFIG_SYS_PHY_ADDR 3
-# define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK15 | CMXFCR_TF2CS_CLK16)
-#else /* RxCLK is CLK13, TxCLK is CLK14 */
-# define CONFIG_SYS_PHY_ADDR 0
-# define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */
-
-# define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-
-#endif /* CONFIG_ETHER_INDEX */
-
-#define CONFIG_SYS_CPMFCR_RAMTYPE 0 /* BDs and buffers on 60x bus */
-#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) /* Full duplex */
-
-#define CONFIG_MII /* MII PHY management */
-#define CONFIG_BITBANGMII /* bit-bang MII PHY management */
-/*
- * GPIO pins used for bit-banged MII communications
- */
-#define MDIO_PORT 2 /* Port C */
-#define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \
- (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
-#define MDC_DECLARE MDIO_DECLARE
-
-#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
-#define CONFIG_SYS_MDIO_PIN 0x00002000 /* PC18 */
-#define CONFIG_SYS_MDC_PIN 0x00001000 /* PC19 */
-#else
-#define CONFIG_SYS_MDIO_PIN 0x00400000 /* PC9 */
-#define CONFIG_SYS_MDC_PIN 0x00200000 /* PC10 */
-#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */
-
-#define MDIO_ACTIVE (iop->pdir |= CONFIG_SYS_MDIO_PIN)
-#define MDIO_TRISTATE (iop->pdir &= ~CONFIG_SYS_MDIO_PIN)
-#define MDIO_READ ((iop->pdat & CONFIG_SYS_MDIO_PIN) != 0)
-
-#define MDIO(bit) if(bit) iop->pdat |= CONFIG_SYS_MDIO_PIN; \
- else iop->pdat &= ~CONFIG_SYS_MDIO_PIN
-
-#define MDC(bit) if(bit) iop->pdat |= CONFIG_SYS_MDC_PIN; \
- else iop->pdat &= ~CONFIG_SYS_MDC_PIN
-
-#define MIIDELAY udelay(1)
-
-#endif /* CONFIG_ETHER_ON_FCC */
-
-#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
-#undef CONFIG_SPD_EEPROM /* On new boards, SDRAM is soldered */
-#else
-#define CONFIG_HARD_I2C 1 /* To enable I2C support */
-#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
-#if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_SPD_ADDR)
-#define CONFIG_SPD_ADDR 0x50
-#endif
-#endif /* CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS */
-
-/*PCI*/
-#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
-#define CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCI_PNP
-#define CONFIG_PCI_BOOTDELAY 0
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
-#ifndef CONFIG_SDRAM_PBI
-#define CONFIG_SDRAM_PBI 0 /* By default, use bank-based interleaving */
-#endif
-
-#ifndef CONFIG_8260_CLKIN
-#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
-#define CONFIG_8260_CLKIN 100000000 /* in Hz */
-#else
-#define CONFIG_8260_CLKIN 66000000 /* in Hz */
-#endif
-#endif
-
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_OF_LIBFDT 1
-#define CONFIG_OF_BOARD_SETUP 1
-#if defined(CONFIG_OF_LIBFDT)
-#define OF_TBCLK (bd->bi_busfreq / 4)
-#endif
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_CDP
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_PORTIO
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SDRAM
-
-#undef CONFIG_CMD_XIMG
-
-#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
- #undef CONFIG_CMD_SDRAM
- #undef CONFIG_CMD_I2C
-
-#elif CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
- #undef CONFIG_CMD_SDRAM
- #undef CONFIG_CMD_I2C
-
-#else
- #undef CONFIG_CMD_PCI
-
-#endif /* CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS */
-
-
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#define CONFIG_BOOTCOMMAND "bootm fff80000" /* autoboot command */
-#define CONFIG_BOOTARGS "root=/dev/mtdblock2"
-
-#if defined(CONFIG_CMD_KGDB)
-#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
-#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
-#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
-#define CONFIG_KGDB_INDEX 2 /* which serial channel for kgdb */
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
-#endif
-
-#define CONFIG_BZIP2 /* include support for bzip2 compressed images */
-#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#define CONFIG_SYS_FLASH_BASE 0xff800000
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 32 /* max num of sects on one chip */
-#define CONFIG_SYS_FLASH_SIZE 8
-#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 5 /* Timeout for Flash Write (in ms) */
-#define CONFIG_SYS_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */
-#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
-
-/*
- * JFFS2 partitions
- *
- * Note: fake mtd_id used, no linux mtd map file
- */
-#define MTDIDS_DEFAULT "nor0=mpc8260ads-0"
-#define MTDPARTS_DEFAULT "mtdparts=mpc8260ads-0:-@1m(jffs2)"
-#define CONFIG_SYS_JFFS2_SORT_FRAGMENTS
-
-/* this is stuff came out of the Motorola docs */
-#ifndef CONFIG_SYS_LOWBOOT
-#define CONFIG_SYS_DEFAULT_IMMR 0x0F010000
-#endif
-
-#define CONFIG_SYS_IMMR 0xF0000000
-#define CONFIG_SYS_BCSR 0xF4500000
-#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
-#define CONFIG_SYS_PCI_INT 0xF8200000
-#endif
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_LSDRAM_BASE 0xFD000000
-
-#define RS232EN_1 0x02000002
-#define RS232EN_2 0x01000001
-#define FETHIEN1 0x08000008
-#define FETH1_RST 0x04000004
-#define FETHIEN2 0x10000000
-#define FETH2_RST 0x08000000
-#define BCSR_PCI_MODE 0x01000000
-
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#ifdef CONFIG_SYS_LOWBOOT
-/* PQ2FADS flash HRCW = 0x0EB4B645 */
-#define CONFIG_SYS_HRCW_MASTER ( ( HRCW_BPS11 | HRCW_CIP ) |\
- ( HRCW_L2CPC10 | HRCW_DPPC11 | HRCW_ISB100 ) |\
- ( HRCW_BMS | HRCW_MMR11 | HRCW_LBPC01 | HRCW_APPC10 ) |\
- ( HRCW_CS10PC01 | HRCW_MODCK_H0101 ) \
- )
-#else
-/* PQ2FADS BCSR HRCW = 0x0CB23645 */
-#define CONFIG_SYS_HRCW_MASTER ( ( HRCW_BPS11 | HRCW_CIP ) |\
- ( HRCW_L2CPC10 | HRCW_DPPC10 | HRCW_ISB010 ) |\
- ( HRCW_BMS | HRCW_APPC10 ) |\
- ( HRCW_MODCK_H0101 ) \
- )
-#endif
-/* no slaves */
-#define CONFIG_SYS_HRCW_SLAVE1 0
-#define CONFIG_SYS_HRCW_SLAVE2 0
-#define CONFIG_SYS_HRCW_SLAVE3 0
-#define CONFIG_SYS_HRCW_SLAVE4 0
-#define CONFIG_SYS_HRCW_SLAVE5 0
-#define CONFIG_SYS_HRCW_SLAVE6 0
-#define CONFIG_SYS_HRCW_SLAVE7 0
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-# define CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-#ifdef CONFIG_BZIP2
-#define CONFIG_SYS_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */
-#else
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */
-#endif /* CONFIG_BZIP2 */
-
-#ifndef CONFIG_SYS_RAMBOOT
-# define CONFIG_ENV_IS_IN_FLASH 1
-# define CONFIG_ENV_SECT_SIZE 0x40000
-# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_ENV_SECT_SIZE)
-#else
-# define CONFIG_ENV_IS_IN_NVRAM 1
-# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
-# define CONFIG_ENV_SIZE 0x200
-#endif /* CONFIG_SYS_RAMBOOT */
-
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE )
-
-#define CONFIG_SYS_HID2 0
-
-#define CONFIG_SYS_SYPCR 0xFFFFFFC3
-#define CONFIG_SYS_BCR 0x100C0000
-#define CONFIG_SYS_SIUMCR 0x0A200000
-#define CONFIG_SYS_SCCR SCCR_DFBRG01
-#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | 0x00001801)
-#define CONFIG_SYS_OR0_PRELIM 0xFF800876
-#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR | 0x00001801)
-#define CONFIG_SYS_OR1_PRELIM 0xFFFF8010
-
-/*We need to configure chip select to use CPLD PCI IC on MPC8272ADS*/
-
-#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
-#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_PCI_INT | 0x1801) /* PCI interrupt controller */
-#define CONFIG_SYS_OR3_PRELIM 0xFFFF8010
-#elif CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
-#define CONFIG_SYS_BR8_PRELIM (CONFIG_SYS_PCI_INT | 0x1801) /* PCI interrupt controller */
-#define CONFIG_SYS_OR8_PRELIM 0xFFFF8010
-#endif
-
-#define CONFIG_SYS_RMR RMR_CSRE
-#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
-#define CONFIG_SYS_RCCR 0
-
-#if (CONFIG_ADSTYPE == CONFIG_SYS_8266ADS) || (CONFIG_ADSTYPE == CONFIG_SYS_8272ADS)
-#undef CONFIG_SYS_LSDRAM_BASE /* No local bus SDRAM on these boards */
-#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8266ADS */
-
-#if CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
-#define CONFIG_SYS_OR2 0xFE002EC0
-#define CONFIG_SYS_PSDMR 0x824B36A3
-#define CONFIG_SYS_PSRT 0x13
-#define CONFIG_SYS_LSDMR 0x828737A3
-#define CONFIG_SYS_LSRT 0x13
-#define CONFIG_SYS_MPTPR 0x2800
-#elif CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
-#define CONFIG_SYS_OR2 0xFC002CC0
-#define CONFIG_SYS_PSDMR 0x834E24A3
-#define CONFIG_SYS_PSRT 0x13
-#define CONFIG_SYS_MPTPR 0x2800
-#else
-#define CONFIG_SYS_OR2 0xFF000CA0
-#define CONFIG_SYS_PSDMR 0x016EB452
-#define CONFIG_SYS_PSRT 0x21
-#define CONFIG_SYS_LSDMR 0x0086A522
-#define CONFIG_SYS_LSRT 0x21
-#define CONFIG_SYS_MPTPR 0x1900
-#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */
-
-#define CONFIG_SYS_RESET_ADDRESS 0x04400000
-
-#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
-
-/* PCI Memory map (if different from default map */
-#define CONFIG_SYS_PCI_SLV_MEM_LOCAL CONFIG_SYS_SDRAM_BASE /* Local base */
-#define CONFIG_SYS_PCI_SLV_MEM_BUS 0x00000000 /* PCI base */
-#define CONFIG_SYS_PICMR0_MASK_ATTRIB (PICMR_MASK_512MB | PICMR_ENABLE | \
- PICMR_PREFETCH_EN)
-
-/*
- * These are the windows that allow the CPU to access PCI address space.
- * All three PCI master windows, which allow the CPU to access PCI
- * prefetch, non prefetch, and IO space (see below), must all fit within
- * these windows.
- */
-
-/*
- * Master window that allows the CPU to access PCI Memory (prefetch).
- * This window will be setup with the second set of Outbound ATU registers
- * in the bridge.
- */
-
-#define CONFIG_SYS_PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */
-#define CONFIG_SYS_PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */
-#define CONFIG_SYS_CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL
-#define CONFIG_SYS_PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */
-#define CONFIG_SYS_POCMR0_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN)
-
-/*
- * Master window that allows the CPU to access PCI Memory (non-prefetch).
- * This window will be setup with the second set of Outbound ATU registers
- * in the bridge.
- */
-
-#define CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */
-#define CONFIG_SYS_PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */
-#define CONFIG_SYS_CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL
-#define CONFIG_SYS_PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */
-#define CONFIG_SYS_POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE)
-
-/*
- * Master window that allows the CPU to access PCI IO space.
- * This window will be setup with the first set of Outbound ATU registers
- * in the bridge.
- */
-
-#define CONFIG_SYS_PCI_MSTR_IO_LOCAL 0xF6000000 /* Local base */
-#define CONFIG_SYS_PCI_MSTR_IO_BUS 0x00000000 /* PCI base */
-#define CONFIG_SYS_CPU_PCI_IO_START PCI_MSTR_IO_LOCAL
-#define CONFIG_SYS_PCI_MSTR_IO_SIZE 0x02000000 /* 64MB */
-#define CONFIG_SYS_POCMR2_MASK_ATTRIB (POCMR_MASK_32MB | POCMR_ENABLE | POCMR_PCI_IO)
-
-
-/* PCIBR0 - for PCI IO*/
-#define CONFIG_SYS_PCI_MSTR0_LOCAL CONFIG_SYS_PCI_MSTR_IO_LOCAL /* Local base */
-#define CONFIG_SYS_PCIMSK0_MASK ~(CONFIG_SYS_PCI_MSTR_IO_SIZE - 1U) /* Size of window */
-/* PCIBR1 - prefetch and non-prefetch regions joined together */
-#define CONFIG_SYS_PCI_MSTR1_LOCAL CONFIG_SYS_PCI_MSTR_MEM_LOCAL
-#define CONFIG_SYS_PCIMSK1_MASK ~(CONFIG_SYS_PCI_MSTR_MEM_SIZE + CONFIG_SYS_PCI_MSTR_MEMIO_SIZE - 1U)
-
-#endif /* CONFIG_ADSTYPE == CONFIG_8272ADS*/
-
-#define CONFIG_HAS_ETH0
-
-#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
-#define CONFIG_HAS_ETH1
-#endif
-
-#define CONFIG_NETDEV eth0
-#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=" __stringify(CONFIG_NETDEV) "\0" \
- "tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \
- " +$filesize; " \
- "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
- "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \
- " $filesize; " \
- "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \
- " +$filesize; " \
- "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \
- " $filesize\0" \
- "fdtaddr=400000\0" \
- "console=ttyCPM0\0" \
- "setbootargs=setenv bootargs " \
- "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
- "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
- "root=$rootdev rw console=$console,$baudrate $othbootargs\0"
-
-#define CONFIG_NFSBOOTCOMMAND \
- "setenv rootdev /dev/nfs;" \
- "run setipargs;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND \
- "setenv rootdev /dev/ram;" \
- "run setbootargs;" \
- "tftp $ramdiskaddr $ramdiskfile;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index 3dd52ce..98e9072 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -15,14 +15,6 @@
#define CONFIG_SYS_NAND_U_BOOT_OFFS 16384
#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
-#ifdef CONFIG_NAND_U_BOOT
-#define CONFIG_SYS_TEXT_BASE 0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */
-#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
-#endif /* CONFIG_NAND_SPL */
-#endif /* CONFIG_NAND_U_BOOT */
-
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE 0xFE000000
#endif
@@ -93,10 +85,6 @@
*/
#define CONFIG_SYS_IMMR 0xE0000000
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-#define CONFIG_DEFAULT_IMMR CONFIG_SYS_IMMR
-#endif
-
/*
* Arbiter Setup
*/
@@ -281,17 +269,10 @@
| OR_FCM_EHTR)
/* 0xFFFF8396 */
-#ifdef CONFIG_NAND_U_BOOT
-#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM
-#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM
-#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NOR_BR_PRELIM
-#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NOR_OR_PRELIM
-#else
#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM
#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM
#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM
#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM
-#endif
#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE
#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB)
@@ -459,16 +440,7 @@
/*
* Environment
*/
-#if defined(CONFIG_NAND_U_BOOT)
- #define CONFIG_ENV_IS_IN_NAND 1
- #define CONFIG_ENV_OFFSET (512 * 1024)
- #define CONFIG_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
- #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
- #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
- #define CONFIG_ENV_RANGE (CONFIG_ENV_SECT_SIZE * 4)
- #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
- CONFIG_ENV_RANGE)
-#elif !defined(CONFIG_SYS_RAMBOOT)
+#if !defined(CONFIG_SYS_RAMBOOT)
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_ADDR \
(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
@@ -503,7 +475,7 @@
#define CONFIG_CMD_DATE
#define CONFIG_CMD_PCI
-#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
#undef CONFIG_CMD_SAVEENV
#undef CONFIG_CMD_LOADS
#endif
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 72f5fde..2722164 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -19,18 +19,6 @@
#define CONFIG_PHYS_64BIT 1
#endif
-#ifdef CONFIG_NAND
-#define CONFIG_NAND_U_BOOT 1
-#define CONFIG_RAMBOOT_NAND 1
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
-#else
-#define CONFIG_SYS_LDSCRIPT $(CPUDIR)/u-boot-nand.lds
-#define CONFIG_SYS_TEXT_BASE 0xf8f82000
-#endif /* CONFIG_NAND_SPL */
-#endif
-
#ifdef CONFIG_SDCARD
#define CONFIG_RAMBOOT_SDCARD 1
#define CONFIG_SYS_TEXT_BASE 0xf8f40000
@@ -222,8 +210,7 @@
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#if defined(CONFIG_RAMBOOT_NAND) || defined(CONFIG_RAMBOOT_SDCARD) || \
- defined(CONFIG_RAMBOOT_SPIFLASH)
+#if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
#define CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_EXTRA_ENV_RELOC
#else
@@ -352,17 +339,10 @@
| OR_FCM_TRLX \
| OR_FCM_EHTR)
-#ifdef CONFIG_RAMBOOT_NAND
-#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
-#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#define CONFIG_SYS_BR2_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
-#define CONFIG_SYS_OR2_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
-#else
#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
#define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#endif
#define CONFIG_SYS_BR4_PRELIM \
(BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \
@@ -625,12 +605,7 @@
*/
#if defined(CONFIG_SYS_RAMBOOT)
-#if defined(CONFIG_RAMBOOT_NAND)
-#define CONFIG_ENV_IS_IN_NAND 1
-#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_OFFSET ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
-#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE)
-#elif defined(CONFIG_RAMBOOT_SPIFLASH)
+#if defined(CONFIG_RAMBOOT_SPIFLASH)
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SPI_BUS 0
#define CONFIG_ENV_SPI_CS 0
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 5165a45..4da247c 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -49,18 +49,6 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_L2_CACHE /* toggle L2 cache */
#define CONFIG_BTB /* toggle branch predition */
-#ifdef CONFIG_NAND
-#define CONFIG_NAND_U_BOOT 1
-#define CONFIG_RAMBOOT_NAND 1
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
-#else
-#define CONFIG_SYS_LDSCRIPT $(CPUDIR)/u-boot-nand.lds
-#define CONFIG_SYS_TEXT_BASE 0xf8f82000
-#endif
-#endif
-
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE 0xfff80000
#endif
@@ -180,12 +168,7 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#if defined(CONFIG_RAMBOOT_NAND)
-#define CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_EXTRA_ENV_RELOC
-#else
#undef CONFIG_SYS_RAMBOOT
-#endif
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
@@ -228,17 +211,10 @@ extern unsigned long get_clock_freq(void);
| OR_FCM_TRLX \
| OR_FCM_EHTR)
-#ifdef CONFIG_RAMBOOT_NAND
-#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
-#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM/* NAND Options */
-#define CONFIG_SYS_BR3_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
-#define CONFIG_SYS_OR3_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
-#else
#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
#define CONFIG_SYS_BR3_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#endif
#define CONFIG_SYS_LBC_LCRR 0x00000004 /* LB clock ratio reg */
#define CONFIG_SYS_LBC_LBCR 0x00040000 /* LB config reg */
@@ -476,11 +452,6 @@ extern unsigned long get_clock_freq(void);
* Environment
*/
#if defined(CONFIG_SYS_RAMBOOT)
-#if defined(CONFIG_RAMBOOT_NAND)
-#define CONFIG_ENV_IS_IN_NAND 1
-#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
-#endif
#else
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 48ae9d4..0b07876 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -20,18 +20,6 @@
#define CONFIG_PHYS_64BIT
#endif
-#ifdef CONFIG_NAND
-#define CONFIG_NAND_U_BOOT
-#define CONFIG_RAMBOOT_NAND
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
-#else
-#define CONFIG_SYS_LDSCRIPT $(CPUDIR)/u-boot-nand.lds
-#define CONFIG_SYS_TEXT_BASE 0xf8f82000
-#endif /* CONFIG_NAND_SPL */
-#endif
-
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE 0xeff40000
#endif
@@ -208,12 +196,7 @@
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#if defined(CONFIG_RAMBOOT_NAND)
-#define CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_EXTRA_ENV_RELOC
-#else
#undef CONFIG_SYS_RAMBOOT
-#endif
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
@@ -353,17 +336,10 @@
| OR_FCM_TRLX \
| OR_FCM_EHTR)
-#ifdef CONFIG_RAMBOOT_NAND
-#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
-#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#define CONFIG_SYS_BR2_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
-#define CONFIG_SYS_OR2_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
-#else
#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
#define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#endif
#define CONFIG_SYS_BR4_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
| BR_PS_8 /* Port Size = 8 bit */ \
@@ -600,12 +576,6 @@
*/
#if defined(CONFIG_SYS_RAMBOOT)
-#if defined(CONFIG_RAMBOOT_NAND)
-#define CONFIG_ENV_IS_IN_NAND 1
-#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_OFFSET ((512 * 1024)\
- + CONFIG_SYS_NAND_BLOCK_SIZE)
-#endif
#else
#define CONFIG_ENV_IS_IN_FLASH 1
diff --git a/include/configs/MPC86xADS.h b/include/configs/MPC86xADS.h
deleted file mode 100644
index beada7e..0000000
--- a/include/configs/MPC86xADS.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the Motorola MPC8xxADS board. Copied from the FADS config.
- *
- * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
- *
- * Modified by, Yuli Barcohen, Arabella Software Ltd., yuli@arabellasw.com
- *
- * Values common to all FADS family boards are in board/fads/fads.h
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-/* board type */
-#define CONFIG_MPC86xADS 1 /* new ADS */
-#define CONFIG_FADS 1 /* We are FADS compatible (more or less) */
-
-/* CPU type - pick one of these */
-#define CONFIG_MPC866T 1
-#undef CONFIG_MPC866P
-#undef CONFIG_MPC859T
-#undef CONFIG_MPC859DSL
-#undef CONFIG_MPC852T
-
-#define CONFIG_SYS_TEXT_BASE 0xFE000000
-
-#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 38400
-
-#define CONFIG_8xx_OSCLK 10000000 /* 10MHz oscillator on EXTCLK */
-#define CONFIG_8xx_CPUCLK_DEFAULT 50000000
-#define CONFIG_SYS_8xx_CPUCLK_MIN 40000000
-#define CONFIG_SYS_8xx_CPUCLK_MAX 80000000
-
-#define CONFIG_DRAM_50MHZ 1
-#define CONFIG_SDRAM_50MHZ 1
-
-#include "../../board/fads/fads.h"
-
-#define CONFIG_SYS_OR5_PRELIM 0xFFFF8110 /* 64Kbyte address space */
-#define CONFIG_SYS_BR5_PRELIM (CONFIG_SYS_PHYDEV_ADDR | BR_PS_8 | BR_V)
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/MPC885ADS.h b/include/configs/MPC885ADS.h
deleted file mode 100644
index eeb2355..0000000
--- a/include/configs/MPC885ADS.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the Motorola MPC885ADS board. Values common to all FADS family boards
- * are in board/fads/fads.h
- *
- * Copyright (C) 2003-2004 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_MPC885ADS 1 /* MPC885ADS board */
-#define CONFIG_FADS 1 /* We are FADS compatible (more or less) */
-
-#define CONFIG_MPC885 1 /* MPC885 CPU (Duet family) */
-
-#define CONFIG_SYS_TEXT_BASE 0xFE000000
-
-#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 38400
-
-#define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */
-#define CONFIG_8xx_CPUCLK_DEFAULT 50000000
-#define CONFIG_SYS_8xx_CPUCLK_MIN 40000000
-#define CONFIG_SYS_8xx_CPUCLK_MAX 133000000
-
-#define CONFIG_SDRAM_50MHZ 1
-
-#include "../../board/fads/fads.h"
-
-#define CONFIG_SYS_OR5_PRELIM 0xFFFF8110 /* 64Kbyte address space */
-#define CONFIG_SYS_BR5_PRELIM (CONFIG_SYS_PHYDEV_ADDR | BR_PS_8 | BR_V)
-
-#define CONFIG_HAS_ETH1
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h
deleted file mode 100644
index 08cfc9e..0000000
--- a/include/configs/NETPHONE.h
+++ /dev/null
@@ -1,701 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
- * U-Boot port on NetTA4 board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#if !defined(CONFIG_NETPHONE_VERSION) || CONFIG_NETPHONE_VERSION > 2
-#error Unsupported CONFIG_NETPHONE version
-#endif
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC870 1 /* This is a MPC885 CPU */
-#define CONFIG_NETPHONE 1 /* ...on a NetPhone board */
-
-#define CONFIG_SYS_TEXT_BASE 0x40000000
-
-#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
-
-/* #define CONFIG_XIN 10000000 */
-#define CONFIG_XIN 50000000
-/* #define MPC8XX_HZ 120000000 */
-#define MPC8XX_HZ 66666666
-
-#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ
-
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-
-#undef CONFIG_CLOCKS_IN_MHZ /* clocks NOT passsed to Linux in MHz */
-
-#define CONFIG_PREBOOT "echo;"
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND \
- "tftpboot; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
- "bootm"
-
-#define CONFIG_SOURCE
-#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-
-#define CONFIG_STATUS_LED 1 /* Status LED enabled */
-#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_NISDOMAIN
-
-#undef CONFIG_MAC_PARTITION
-#undef CONFIG_DOS_PARTITION
-
-#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-
-#define FEC_ENET 1 /* eth.c needs it that way... */
-#undef CONFIG_SYS_DISCOVER_PHY
-#define CONFIG_MII 1
-#define CONFIG_MII_INIT 1
-#define CONFIG_RMII 1 /* use RMII interface */
-
-#define CONFIG_ETHER_ON_FEC1 1
-#define CONFIG_FEC1_PHY 8 /* phy address of FEC */
-#define CONFIG_FEC1_PHY_NORXERR 1
-
-#define CONFIG_ETHER_ON_FEC2 1
-#define CONFIG_FEC2_PHY 4
-#define CONFIG_FEC2_PHY_NORXERR 1
-
-#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_CDP
-
-
-#define CONFIG_BOARD_EARLY_INIT_F 1
-#define CONFIG_MISC_INIT_R
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-
-#define CONFIG_SYS_HUSH_PARSER 1
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0300000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFF000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0x40000000
-#if defined(DEBUG)
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#else
-#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#endif
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-#if CONFIG_NETPHONE_VERSION == 2
-#define CONFIG_SYS_FLASH_BASE4 0x40080000
-#endif
-
-#define CONFIG_SYS_RESET_ADDRESS 0x80000000
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#if CONFIG_NETPHONE_VERSION == 1
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#elif CONFIG_NETPHONE_VERSION == 2
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#endif
-#define CONFIG_SYS_MAX_FLASH_SECT 8 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SECT_SIZE 0x10000
-
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x60000)
-#define CONFIG_ENV_SIZE 0x4000
-
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + 0x70000)
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#ifndef CONFIG_CAN_DRIVER
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
-#else /* we must activate GPL5 in the SIUMCR for CAN */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
-#endif /* CONFIG_CAN_DRIVER */
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- */
-
-#if CONFIG_XIN == 10000000
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 50000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 25000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 40000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 75000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 10MHz
-#endif
-
-#elif CONFIG_XIN == 50000000
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 66666666
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 50MHz
-#endif
-
-#else
-
-#error unsupported XIN freq
-#endif
-
-
-/*
- *-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- *
- * Note: When TBS == 0 the timebase is independent of current cpu clock.
- */
-
-#define SCCR_MASK SCCR_EBDF11
-#if MPC8XX_HZ > 66666666
-#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \
- SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
- SCCR_DFALCD00 | SCCR_EBDF01)
-#else
-#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \
- SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
- SCCR_DFALCD00)
-#endif
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-/*#define CONFIG_SYS_DER 0x2002000F*/
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
-
-/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX)
-
-#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
-
-#if CONFIG_NETPHONE_VERSION == 2
-
-#define FLASH_BASE4_PRELIM 0x40080000 /* FLASH bank #1 */
-
-#define CONFIG_SYS_OR4_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR4_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR4_PRELIM ((FLASH_BASE4_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
-
-#endif
-
-/*
- * BR3 and OR3 (SDRAM)
- *
- */
-#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank #0 */
-#define SDRAM_MAX_SIZE (256 << 20) /* max 256MB per bank */
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
-#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM | OR_G5LS)
-
-#define CONFIG_SYS_OR3_PRELIM ((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM)
-#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V)
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/*
- * Memory Periodic Timer Prescaler
- *
- * The Divider for PTA (refresh timer) configuration is based on an
- * example SDRAM configuration (64 MBit, one bank). The adjustment to
- * the number of chip selects (NCS) and the actually needed refresh
- * rate is done by setting MPTPR.
- *
- * PTA is calculated from
- * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
- *
- * gclk CPU clock (not bus clock!)
- * Trefresh Refresh cycle * 4 (four word bursts used)
- *
- * 4096 Rows from SDRAM example configuration
- * 1000 factor s -> ms
- * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration
- * 4 Number of refresh cycles per period
- * 64 Refresh cycle in ms per number of rows
- * --------------------------------------------
- * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
- *
- * 50 MHz => 50.000.000 / Divider = 98
- * 66 Mhz => 66.000.000 / Divider = 129
- * 80 Mhz => 80.000.000 / Divider = 156
- */
-
-#define CONFIG_SYS_MAMR_PTA 234
-
-/*
- * For 16 MBit, refresh rates could be 31.3 us
- * (= 64 ms / 2K = 125 / quad bursts).
- * For a simpler initialization, 15.6 us is used instead.
- *
- * #define CONFIG_SYS_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
- * #define CONFIG_SYS_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
- */
-#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
-#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-#define CONFIG_LAST_STAGE_INIT /* needed to reset the damn phys */
-
-/****************************************************************/
-
-#define DSP_SIZE 0x00010000 /* 64K */
-#define NAND_SIZE 0x00010000 /* 64K */
-
-#define DSP_BASE 0xF1000000
-#define NAND_BASE 0xF1010000
-
-/*****************************************************************************/
-
-#define CONFIG_SYS_DIRECT_FLASH_TFTP
-
-/*****************************************************************************/
-
-#if CONFIG_NETPHONE_VERSION == 1
-#define STATUS_LED_BIT 0x00000008 /* bit 28 */
-#elif CONFIG_NETPHONE_VERSION == 2
-#define STATUS_LED_BIT 0x00000080 /* bit 24 */
-#endif
-
-#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
-#define STATUS_LED_STATE STATUS_LED_BLINKING
-
-#define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
-#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
-
-#ifndef __ASSEMBLY__
-
-/* LEDs */
-
-/* led_id_t is unsigned int mask */
-typedef unsigned int led_id_t;
-
-#define __led_toggle(_msk) \
- do { \
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat ^= (_msk); \
- } while(0)
-
-#define __led_set(_msk, _st) \
- do { \
- if ((_st)) \
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat |= (_msk); \
- else \
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat &= ~(_msk); \
- } while(0)
-
-#define __led_init(msk, st) __led_set(msk, st)
-
-#endif
-
-/***********************************************************************************************************
-
- ----------------------------------------------------------------------------------------------
-
- (V1) version 1 of the board
- (V2) version 2 of the board
-
- ----------------------------------------------------------------------------------------------
-
- Pin definitions:
-
- +------+----------------+--------+------------------------------------------------------------
- | # | Name | Type | Comment
- +------+----------------+--------+------------------------------------------------------------
- | PA3 | SPIEN_MAX | Output | MAX serial to uart chip select
- | PA7 | DSP_INT | Output | DSP interrupt
- | PA10 | DSP_RESET | Output | DSP reset
- | PA14 | USBOE | Output | USB (1)
- | PA15 | USBRXD | Output | USB (1)
- | PB19 | BT_RTS | Output | Bluetooth (0)
- | PB23 | BT_CTS | Output | Bluetooth (0)
- | PB26 | SPIEN_SEP | Output | Serial EEPROM chip select
- | PB27 | SPICS_DISP | Output | Display chip select
- | PB28 | SPI_RXD_3V | Input | SPI Data Rx
- | PB29 | SPI_TXD | Output | SPI Data Tx
- | PB30 | SPI_CLK | Output | SPI Clock
- | PC10 | DISPA0 | Output | Display A0
- | PC11 | BACKLIGHT | Output | Display backlit
- | PC12 | SPI2RXD | Input | (V1) 2nd SPI RXD
- | | IO_RESET | Output | (V2) General I/O reset
- | PC13 | SPI2TXD | Output | (V1) 2nd SPI TXD (V1)
- | | HOOK | Input | (V2) Hook input interrupt
- | PC15 | SPI2CLK | Output | (V1) 2nd SPI CLK
- | | F_RY_BY | Input | (V2) NAND F_RY_BY
- | PE17 | F_ALE | Output | NAND F_ALE
- | PE18 | F_CLE | Output | NAND F_CLE
- | PE20 | F_CE | Output | NAND F_CE
- | PE24 | SPICS_SCOUT | Output | (V1) Codec chip select
- | | LED | Output | (V2) LED
- | PE27 | SPICS_ER | Output | External serial register CS
- | PE28 | LEDIO1 | Output | (V1) LED
- | | BKBR1 | Input | (V2) Keyboard input scan
- | PE29 | LEDIO2 | Output | (V1) LED hook for A (TA2)
- | | BKBR2 | Input | (V2) Keyboard input scan
- | PE30 | LEDIO3 | Output | (V1) LED hook for A (TA2)
- | | BKBR3 | Input | (V2) Keyboard input scan
- | PE31 | F_RY_BY | Input | (V1) NAND F_RY_BY
- | | BKBR4 | Input | (V2) Keyboard input scan
- +------+----------------+--------+---------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Serial register input:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | 0 | BKBR1 | (V1) Keyboard input scan
- | 1 | BKBR3 | (V1) Keyboard input scan
- | 2 | BKBR4 | (V1) Keyboard input scan
- | 3 | BKBR2 | (V1) Keyboard input scan
- | 4 | HOOK | (V1) Hook switch
- | 5 | BT_LINK | (V1) Bluetooth link status
- | 6 | HOST_WAKE | (V1) Bluetooth host wake up
- | 7 | OK_ETH | (V1) Cisco inline power OK status
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Serial register output:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | 0 | KEY1 | Keyboard output scan
- | 1 | KEY2 | Keyboard output scan
- | 2 | KEY3 | Keyboard output scan
- | 3 | KEY4 | Keyboard output scan
- | 4 | KEY5 | Keyboard output scan
- | 5 | KEY6 | Keyboard output scan
- | 6 | KEY7 | Keyboard output scan
- | 7 | BT_WAKE | Bluetooth wake up
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Chip selects:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | CS0 | CS0 | Boot flash
- | CS1 | CS_FLASH | NAND flash
- | CS2 | CS_DSP | DSP
- | CS3 | DCS_DRAM | DRAM
- | CS4 | CS_FLASH2 | (V2) 2nd flash
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Interrupts:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | IRQ1 | IRQ_DSP | DSP interrupt
- | IRQ3 | S_INTER | DUSLIC ???
- | IRQ4 | F_RY_BY | NAND
- | IRQ7 | IRQ_MAX | MAX 3100 interrupt
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Interrupts on PCMCIA pins:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | IP_A0| PHY1_LINK | Link status changed for #1 Ethernet interface
- | IP_A1| PHY2_LINK | Link status changed for #2 Ethernet interface
- | IP_A2| RMII1_MDINT | PHY interrupt for #1
- | IP_A3| RMII2_MDINT | PHY interrupt for #2
- | IP_A5| HOST_WAKE | (V2) Bluetooth host wake
- | IP_A6| OK_ETH | (V2) Cisco inline power OK
- +------+----------------+------------------------------------------------------------
-
-*************************************************************************************************/
-
-#define CONFIG_SED156X 1 /* use SED156X */
-#define CONFIG_SED156X_PG12864Q 1 /* type of display used */
-
-/* serial interfacing macros */
-
-#define SED156X_SPI_RXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define SED156X_SPI_RXD_MASK 0x00000008
-
-#define SED156X_SPI_TXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define SED156X_SPI_TXD_MASK 0x00000004
-
-#define SED156X_SPI_CLK_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define SED156X_SPI_CLK_MASK 0x00000002
-
-#define SED156X_CS_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define SED156X_CS_MASK 0x00000010
-
-#define SED156X_A0_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat)
-#define SED156X_A0_MASK 0x0020
-
-/*************************************************************************************************/
-
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1
-#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE 1
-
-/*************************************************************************************************/
-
-/* use board specific hardware */
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_HW_WATCHDOG
-#define CONFIG_SHOW_ACTIVITY
-
-/*************************************************************************************************/
-
-/* phone console configuration */
-
-#define PHONE_CONSOLE_POLL_HZ (CONFIG_SYS_HZ/200) /* poll every 5ms */
-
-/*************************************************************************************************/
-
-#define CONFIG_CDP_DEVICE_ID 20
-#define CONFIG_CDP_DEVICE_ID_PREFIX "NP" /* netphone */
-#define CONFIG_CDP_PORT_ID "eth%d"
-#define CONFIG_CDP_CAPABILITIES 0x00000010
-#define CONFIG_CDP_VERSION "u-boot" " " U_BOOT_DATE " " U_BOOT_TIME
-#define CONFIG_CDP_PLATFORM "Intracom NetPhone"
-#define CONFIG_CDP_TRIGGER 0x20020001
-#define CONFIG_CDP_POWER_CONSUMPTION 4300 /* 90 mA @ 48V */
-#define CONFIG_CDP_APPLIANCE_VLAN_TYPE 0x01 /* ipphone */
-
-/*************************************************************************************************/
-
-#define CONFIG_AUTO_COMPLETE 1
-
-/*************************************************************************************************/
-
-#define CONFIG_CRC32_VERIFY 1
-
-/*************************************************************************************************/
-
-#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE 1
-
-/*************************************************************************************************/
-#endif /* __CONFIG_H */
diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h
deleted file mode 100644
index 800a922..0000000
--- a/include/configs/NETTA.h
+++ /dev/null
@@ -1,666 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
- * U-Boot port on NetTA4 board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC885 1 /* This is a MPC885 CPU */
-#define CONFIG_NETTA 1 /* ...on a NetTA board */
-
-#define CONFIG_SYS_TEXT_BASE 0x40000000
-
-#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
-
-/* #define CONFIG_XIN 10000000 */
-#define CONFIG_XIN 50000000
-#define MPC8XX_HZ 120000000
-/* #define MPC8XX_HZ 100000000 */
-/* #define MPC8XX_HZ 50000000 */
-/* #define MPC8XX_HZ 80000000 */
-
-#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ
-
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-
-#undef CONFIG_CLOCKS_IN_MHZ /* clocks NOT passsed to Linux in MHz */
-
-#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND \
- "tftpboot; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
- "bootm"
-
-#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_HW_WATCHDOG
-
-#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_NISDOMAIN
-
-
-#undef CONFIG_MAC_PARTITION
-#undef CONFIG_DOS_PARTITION
-
-#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-
-#define FEC_ENET 1 /* eth.c needs it that way... */
-#undef CONFIG_SYS_DISCOVER_PHY /* do not discover phys */
-#define CONFIG_MII 1
-#define CONFIG_MII_INIT 1
-#define CONFIG_RMII 1 /* use RMII interface */
-
-#if defined(CONFIG_NETTA_ISDN)
-#define CONFIG_ETHER_ON_FEC1 1
-#define CONFIG_FEC1_PHY 1 /* phy address of FEC1 */
-#define CONFIG_FEC1_PHY_NORXERR 1
-#undef CONFIG_ETHER_ON_FEC2
-#else
-#define CONFIG_ETHER_ON_FEC1 1
-#define CONFIG_FEC1_PHY 8 /* phy address of FEC1 */
-#define CONFIG_FEC1_PHY_NORXERR 1
-#define CONFIG_ETHER_ON_FEC2 1
-#define CONFIG_FEC2_PHY 1 /* phy address of FEC2 */
-#define CONFIG_FEC2_PHY_NORXERR 1
-#endif
-
-#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */
-
-/* POST support */
-#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \
- CONFIG_SYS_POST_CODEC | \
- CONFIG_SYS_POST_DSP )
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_CDP
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PCMCIA
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_BOARD_EARLY_INIT_F 1
-#define CONFIG_MISC_INIT_R
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-
-#define CONFIG_SYS_HUSH_PARSER 1
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0300000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFF000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0x40000000
-#if defined(DEBUG)
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#else
-#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#endif
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 8 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SECT_SIZE 0x10000
-
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x60000)
-#define CONFIG_ENV_SIZE 0x4000
-
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + 0x70000)
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#ifndef CONFIG_CAN_DRIVER
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
-#else /* we must activate GPL5 in the SIUMCR for CAN */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
-#endif /* CONFIG_CAN_DRIVER */
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- */
-
-#if CONFIG_XIN == 10000000
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 50000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 25000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 40000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 75000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 10MHz
-#endif
-
-#elif CONFIG_XIN == 50000000
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 80000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 50000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 50MHz
-#endif
-
-#else
-
-#error unsupported XIN freq
-#endif
-
-
-/*
- *-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- *
- * Note: When TBS == 0 the timebase is independent of current cpu clock.
- */
-
-#define SCCR_MASK SCCR_EBDF11
-#if MPC8XX_HZ > 66666666
-#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \
- SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL111 | SCCR_DFNH000 | SCCR_DFLCD000 | \
- SCCR_DFALCD00 | SCCR_EBDF01)
-#else
-#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \
- SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL111 | SCCR_DFNH000 | SCCR_DFLCD000 | \
- SCCR_DFALCD00)
-#endif
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-/*#define CONFIG_SYS_DER 0x2002000F*/
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
-
-/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX)
-
-#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
-
-/*
- * BR3 and OR3 (SDRAM)
- *
- */
-#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank #0 */
-#define SDRAM_MAX_SIZE (256 << 20) /* max 256MB per bank */
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
-#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM | OR_G5LS)
-
-#define CONFIG_SYS_OR3_PRELIM ((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM)
-#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V)
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/*
- * Memory Periodic Timer Prescaler
- *
- * The Divider for PTA (refresh timer) configuration is based on an
- * example SDRAM configuration (64 MBit, one bank). The adjustment to
- * the number of chip selects (NCS) and the actually needed refresh
- * rate is done by setting MPTPR.
- *
- * PTA is calculated from
- * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
- *
- * gclk CPU clock (not bus clock!)
- * Trefresh Refresh cycle * 4 (four word bursts used)
- *
- * 4096 Rows from SDRAM example configuration
- * 1000 factor s -> ms
- * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration
- * 4 Number of refresh cycles per period
- * 64 Refresh cycle in ms per number of rows
- * --------------------------------------------
- * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
- *
- * 50 MHz => 50.000.000 / Divider = 98
- * 66 Mhz => 66.000.000 / Divider = 129
- * 80 Mhz => 80.000.000 / Divider = 156
- */
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_MAMR_PTA 234
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_MAMR_PTA 195
-#elif MPC8XX_HZ == 80000000
-#define CONFIG_SYS_MAMR_PTA 156
-#elif MPC8XX_HZ == 50000000
-#define CONFIG_SYS_MAMR_PTA 98
-#else
-#error Unknown frequency
-#endif
-
-
-/*
- * For 16 MBit, refresh rates could be 31.3 us
- * (= 64 ms / 2K = 125 / quad bursts).
- * For a simpler initialization, 15.6 us is used instead.
- *
- * #define CONFIG_SYS_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
- * #define CONFIG_SYS_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
- */
-#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
-#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-#define CONFIG_LAST_STAGE_INIT /* needed to reset the damn phys */
-
-/***********************************************************************************************************
-
- Pin definitions:
-
- +------+----------------+--------+------------------------------------------------------------
- | # | Name | Type | Comment
- +------+----------------+--------+------------------------------------------------------------
- | PA3 | OK_ETH_3V | Input | CISCO Ethernet power OK
- | | | | (NetRoute: FEC1, TA: FEC2) (0=power OK)
- | PA6 | P_VCCD1 | Output | TPS2211A PCMCIA
- | PA7 | DCL1_3V | Periph | IDL1 PCM clock
- | PA8 | DSP_DR1 | Periph | IDL1 PCM Data Rx
- | PA9 | L1TXDA | Periph | IDL1 PCM Data Tx
- | PA10 | P_VCCD0 | Output | TPS2211A PCMCIA
- | PA12 | P_SHDN | Output | TPS2211A PCMCIA
- | PA13 | ETH_LOOP | Output | CISCO Loopback remote power
- | | | | (NetRoute: FEC1, TA: FEC2) (1=NORMAL)
- | PA14 | P_VPPD0 | Output | TPS2211A PCMCIA
- | PA15 | P_VPPD1 | Output | TPS2211A PCMCIA
- | PB14 | SPIEN_FXO | Output | SPI CS for FXO daughter-board
- | PB15 | SPIEN_S1 | Output | SPI CS for S-interface 1 (NetRoute only)
- | PB16 | DREQ1 | Output | D channel request for S-interface chip 1.
- | PB17 | L1ST3 | Periph | IDL1 timeslot enable signal for PPC
- | PB18 | L1ST2 | Periph | IDL1 timeslot enable signal for PPC
- | PB19 | SPIEN_S2 | Output | SPI CS for S-interface 2 (NetRoute only)
- | PB20 | SPIEN_SEEPROM | Output | SPI CS for serial eeprom
- | PB21 | LEDIO | Output | Led mode indication for PHY
- | PB22 | UART_CTS | Input | UART CTS
- | PB23 | UART_RTS | Output | UART RTS
- | PB24 | UART_RX | Periph | UART Data Rx
- | PB25 | UART_TX | Periph | UART Data Tx
- | PB26 | RMII-MDC | Periph | Free for future use (MII mgt clock)
- | PB27 | RMII-MDIO | Periph | Free for future use (MII mgt data)
- | PB28 | SPI_RXD_3V | Input | SPI Data Rx
- | PB29 | SPI_TXD | Output | SPI Data Tx
- | PB30 | SPI_CLK | Output | SPI Clock
- | PB31 | RMII1-REFCLK | Periph | RMII reference clock for FEC1
- | PC4 | PHY1_LINK | Input | PHY link state FEC1 (interrupt)
- | PC5 | PHY2_LINK | Input | PHY link state FEC2 (interrupt)
- | PC6 | RMII1-MDINT | Input | PHY prog interrupt FEC1 (interrupt)
- | PC7 | RMII2-MDINT | Input | PHY prog interrupt FEC1 (interrupt)
- | PC8 | P_OC | Input | TPS2211A PCMCIA overcurrent (interrupt) (1=OK)
- | PC9 | COM_HOOK1 | Input | Codec interrupt chip #1 (interrupt)
- | PC10 | COM_HOOK2 | Input | Codec interrupt chip #2 (interrupt)
- | PC11 | COM_HOOK4 | Input | Codec interrupt chip #4 (interrupt)
- | PC12 | COM_HOOK3 | Input | Codec interrupt chip #3 (interrupt)
- | PC13 | F_RY_BY | Input | NAND ready signal (interrupt)
- | PC14 | FAN_OK | Input | Fan status signal (interrupt) (1=OK)
- | PC15 | PC15_DIRECT0 | Periph | PCMCIA DMA request.
- | PD3 | F_ALE | Output | NAND
- | PD4 | F_CLE | Output | NAND
- | PD5 | F_CE | Output | NAND
- | PD6 | DSP_INT | Output | DSP debug interrupt
- | PD7 | DSP_RESET | Output | DSP reset
- | PD8 | RMII_MDC | Periph | MII mgt clock
- | PD9 | SPIEN_C1 | Output | SPI CS for codec #1
- | PD10 | SPIEN_C2 | Output | SPI CS for codec #2
- | PD11 | SPIEN_C3 | Output | SPI CS for codec #3
- | PD12 | FSC2 | Periph | IDL2 frame sync
- | PD13 | DGRANT2 | Input | D channel grant from S #2
- | PD14 | SPIEN_C4 | Output | SPI CS for codec #4
- | PD15 | TP700 | Output | Testpoint for software debugging
- | PE14 | RMII2-TXD0 | Periph | FEC2 transmit data
- | PE15 | RMII2-TXD1 | Periph | FEC2 transmit data
- | PE16 | RMII2-REFCLK | Periph | TA: RMII ref clock for
- | | DCL2 | Periph | NetRoute: PCM clock #2
- | PE17 | TP703 | Output | Testpoint for software debugging
- | PE18 | DGRANT1 | Input | D channel grant from S #1
- | PE19 | RMII2-TXEN | Periph | TA: FEC2 tx enable
- | | PCM2OUT | Periph | NetRoute: Tx data for IDL2
- | PE20 | FSC1 | Periph | IDL1 frame sync
- | PE21 | RMII2-RXD0 | Periph | FEC2 receive data
- | PE22 | RMII2-RXD1 | Periph | FEC2 receive data
- | PE23 | L1ST1 | Periph | IDL1 timeslot enable signal for PPC
- | PE24 | U-N1 | Output | Select user/network for S #1 (0=user)
- | PE25 | U-N2 | Output | Select user/network for S #2 (0=user)
- | PE26 | RMII2-RXDV | Periph | FEC2 valid
- | PE27 | DREQ2 | Output | D channel request for S #2.
- | PE28 | FPGA_DONE | Input | FPGA done signal
- | PE29 | FPGA_INIT | Output | FPGA init signal
- | PE30 | UDOUT2_3V | Input | IDL2 PCM input
- | PE31 | | | Free
- +------+----------------+--------+---------------------------------------------------
-
- Chip selects:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | CS0 | CS0 | Boot flash
- | CS1 | CS_FLASH | NAND flash
- | CS2 | CS_DSP | DSP
- | CS3 | DCS_DRAM | DRAM
- | CS4 | CS_ER1 | External output register
- +------+----------------+------------------------------------------------------------
-
- Interrupts:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | IRQ1 | UINTER_3V | S interrupt chips interrupt (common)
- | IRQ3 | IRQ_DSP | DSP interrupt
- | IRQ4 | IRQ_DSP1 | Extra DSP interrupt
- +------+----------------+------------------------------------------------------------
-
-*************************************************************************************************/
-
-#define DSP_SIZE 0x00010000 /* 64K */
-#define NAND_SIZE 0x00010000 /* 64K */
-#define ER_SIZE 0x00010000 /* 64K */
-#define DUMMY_SIZE 0x00010000 /* 64K */
-
-#define DSP_BASE 0xF1000000
-#define NAND_BASE 0xF1010000
-#define ER_BASE 0xF1020000
-#define DUMMY_BASE 0xF1FF0000
-
-/*****************************************************************************/
-
-#define CONFIG_SYS_DIRECT_FLASH_TFTP
-#define CONFIG_SYS_DIRECT_NAND_TFTP
-
-/*****************************************************************************/
-
-#if 1
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- */
-
-#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
- *-----------------------------------------------------------------------
- */
-
-#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
-#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
-
-#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
-#undef CONFIG_IDE_LED /* LED for ide not supported */
-#undef CONFIG_IDE_RESET /* reset for ide not supported */
-
-#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR
-
-/* Offset for data I/O */
-#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for alternate registers */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-#endif
-
-/*************************************************************************************************/
-
-#define CONFIG_CDP_DEVICE_ID 20
-#define CONFIG_CDP_DEVICE_ID_PREFIX "NT" /* netta */
-#define CONFIG_CDP_PORT_ID "eth%d"
-#define CONFIG_CDP_CAPABILITIES 0x00000010
-#define CONFIG_CDP_VERSION "u-boot 1.0" " " U_BOOT_DATE " " U_BOOT_TIME
-#define CONFIG_CDP_PLATFORM "Intracom NetTA"
-#define CONFIG_CDP_TRIGGER 0x20020001
-#define CONFIG_CDP_POWER_CONSUMPTION 4300 /* 90 mA @ 48V */
-#define CONFIG_CDP_APPLIANCE_VLAN_TYPE 0x01 /* ipphone? */
-
-/*************************************************************************************************/
-
-#define CONFIG_AUTO_COMPLETE 1
-
-/*************************************************************************************************/
-
-#define CONFIG_CRC32_VERIFY 1
-
-/*************************************************************************************************/
-
-#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE 1
-
-/*************************************************************************************************/
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h
deleted file mode 100644
index 55ae4b5..0000000
--- a/include/configs/NETTA2.h
+++ /dev/null
@@ -1,654 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
- * U-Boot port on NetTA4 board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#if !defined(CONFIG_NETTA2_VERSION) || CONFIG_NETTA2_VERSION > 2
-#error Unsupported CONFIG_NETTA2 version
-#endif
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC870 1 /* This is a MPC885 CPU */
-#define CONFIG_NETTA2 1 /* ...on a NetTA2 board */
-
-#define CONFIG_SYS_TEXT_BASE 0x40000000
-
-#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
-
-/* #define CONFIG_XIN 10000000 */
-#define CONFIG_XIN 50000000
-/* #define MPC8XX_HZ 120000000 */
-#define MPC8XX_HZ 66666666
-
-#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ
-
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-
-#undef CONFIG_CLOCKS_IN_MHZ /* clocks NOT passsed to Linux in MHz */
-
-#define CONFIG_PREBOOT "echo;"
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND \
- "tftpboot; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
- "bootm"
-
-#define CONFIG_SOURCE
-#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-
-#define CONFIG_STATUS_LED 1 /* Status LED enabled */
-#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_NISDOMAIN
-
-
-#undef CONFIG_MAC_PARTITION
-#undef CONFIG_DOS_PARTITION
-
-#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-
-#define FEC_ENET 1 /* eth.c needs it that way... */
-#undef CONFIG_SYS_DISCOVER_PHY
-#define CONFIG_MII 1
-#define CONFIG_MII_INIT 1
-#define CONFIG_RMII 1 /* use RMII interface */
-
-#define CONFIG_ETHER_ON_FEC1 1
-#define CONFIG_FEC1_PHY 8 /* phy address of FEC */
-#define CONFIG_FEC1_PHY_NORXERR 1
-
-#define CONFIG_ETHER_ON_FEC2 1
-#define CONFIG_FEC2_PHY 4
-#define CONFIG_FEC2_PHY_NORXERR 1
-
-#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_CDP
-
-
-#define CONFIG_BOARD_EARLY_INIT_F 1
-#define CONFIG_MISC_INIT_R
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-
-#define CONFIG_SYS_HUSH_PARSER 1
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0300000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFF000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0x40000000
-#if defined(DEBUG)
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#else
-#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#endif
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-#if CONFIG_NETTA2_VERSION == 2
-#define CONFIG_SYS_FLASH_BASE4 0x40080000
-#endif
-
-#define CONFIG_SYS_RESET_ADDRESS 0x80000000
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#if CONFIG_NETTA2_VERSION == 1
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#elif CONFIG_NETTA2_VERSION == 2
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#endif
-#define CONFIG_SYS_MAX_FLASH_SECT 8 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SECT_SIZE 0x10000
-
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x60000)
-#define CONFIG_ENV_OFFSET 0
-#define CONFIG_ENV_SIZE 0x4000
-
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + 0x70000)
-#define CONFIG_ENV_OFFSET_REDUND 0
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#ifndef CONFIG_CAN_DRIVER
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
-#else /* we must activate GPL5 in the SIUMCR for CAN */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
-#endif /* CONFIG_CAN_DRIVER */
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- */
-
-#if CONFIG_XIN == 10000000
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 50000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 25000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 40000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 75000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 10MHz
-#endif
-
-#elif CONFIG_XIN == 50000000
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 66666666
-#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
- (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
- PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 50MHz
-#endif
-
-#else
-
-#error unsupported XIN freq
-#endif
-
-
-/*
- *-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- *
- * Note: When TBS == 0 the timebase is independent of current cpu clock.
- */
-
-#define SCCR_MASK SCCR_EBDF11
-#if MPC8XX_HZ > 66666666
-#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \
- SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
- SCCR_DFALCD00 | SCCR_EBDF01)
-#else
-#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \
- SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
- SCCR_DFALCD00)
-#endif
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-/*#define CONFIG_SYS_DER 0x2002000F*/
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
-
-/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX)
-
-#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
-
-#if CONFIG_NETTA2_VERSION == 2
-
-#define FLASH_BASE4_PRELIM 0x40080000 /* FLASH bank #1 */
-
-#define CONFIG_SYS_OR4_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR4_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR4_PRELIM ((FLASH_BASE4_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
-
-#endif
-
-/*
- * BR3 and OR3 (SDRAM)
- *
- */
-#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank #0 */
-#define SDRAM_MAX_SIZE (256 << 20) /* max 256MB per bank */
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
-#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM | OR_G5LS)
-
-#define CONFIG_SYS_OR3_PRELIM ((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM)
-#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V)
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/*
- * Memory Periodic Timer Prescaler
- *
- * The Divider for PTA (refresh timer) configuration is based on an
- * example SDRAM configuration (64 MBit, one bank). The adjustment to
- * the number of chip selects (NCS) and the actually needed refresh
- * rate is done by setting MPTPR.
- *
- * PTA is calculated from
- * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
- *
- * gclk CPU clock (not bus clock!)
- * Trefresh Refresh cycle * 4 (four word bursts used)
- *
- * 4096 Rows from SDRAM example configuration
- * 1000 factor s -> ms
- * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration
- * 4 Number of refresh cycles per period
- * 64 Refresh cycle in ms per number of rows
- * --------------------------------------------
- * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
- *
- * 50 MHz => 50.000.000 / Divider = 98
- * 66 Mhz => 66.000.000 / Divider = 129
- * 80 Mhz => 80.000.000 / Divider = 156
- */
-
-#define CONFIG_SYS_MAMR_PTA 234
-
-/*
- * For 16 MBit, refresh rates could be 31.3 us
- * (= 64 ms / 2K = 125 / quad bursts).
- * For a simpler initialization, 15.6 us is used instead.
- *
- * #define CONFIG_SYS_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
- * #define CONFIG_SYS_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
- */
-#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
-#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-#define CONFIG_LAST_STAGE_INIT /* needed to reset the damn phys */
-
-/****************************************************************/
-
-#define DSP_SIZE 0x00010000 /* 64K */
-#define NAND_SIZE 0x00010000 /* 64K */
-
-#define DSP_BASE 0xF1000000
-#define NAND_BASE 0xF1010000
-
-/*****************************************************************************/
-
-#define CONFIG_SYS_DIRECT_FLASH_TFTP
-
-/*****************************************************************************/
-
-#if CONFIG_NETTA2_VERSION == 1
-#define STATUS_LED_BIT 0x00000008 /* bit 28 */
-#elif CONFIG_NETTA2_VERSION == 2
-#define STATUS_LED_BIT 0x00000080 /* bit 24 */
-#endif
-
-#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
-#define STATUS_LED_STATE STATUS_LED_BLINKING
-
-#define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
-#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
-
-#ifndef __ASSEMBLY__
-
-/* LEDs */
-
-/* led_id_t is unsigned int mask */
-typedef unsigned int led_id_t;
-
-#define __led_toggle(_msk) \
- do { \
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat ^= (_msk); \
- } while(0)
-
-#define __led_set(_msk, _st) \
- do { \
- if ((_st)) \
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat |= (_msk); \
- else \
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat &= ~(_msk); \
- } while(0)
-
-#define __led_init(msk, st) __led_set(msk, st)
-
-#endif
-
-/***********************************************************************************************************
-
- ----------------------------------------------------------------------------------------------
-
- (V1) version 1 of the board
- (V2) version 2 of the board
-
- ----------------------------------------------------------------------------------------------
-
- Pin definitions:
-
- +------+----------------+--------+------------------------------------------------------------
- | # | Name | Type | Comment
- +------+----------------+--------+------------------------------------------------------------
- | PA3 | SPIEN_MAX | Output | MAX serial to uart chip select
- | PA7 | DSP_INT | Output | DSP interrupt
- | PA10 | DSP_RESET | Output | DSP reset
- | PA14 | USBOE | Output | USB (1)
- | PA15 | USBRXD | Output | USB (1)
- | PB19 | BT_RTS | Output | Bluetooth (0)
- | PB23 | BT_CTS | Output | Bluetooth (0)
- | PB26 | SPIEN_SEP | Output | Serial EEPROM chip select
- | PB27 | SPICS_DISP | Output | Display chip select
- | PB28 | SPI_RXD_3V | Input | SPI Data Rx
- | PB29 | SPI_TXD | Output | SPI Data Tx
- | PB30 | SPI_CLK | Output | SPI Clock
- | PC10 | DISPA0 | Output | Display A0
- | PC11 | BACKLIGHT | Output | Display backlit
- | PC12 | SPI2RXD | Input | (V1) 2nd SPI RXD
- | | IO_RESET | Output | (V2) General I/O reset
- | PC13 | SPI2TXD | Output | (V1) 2nd SPI TXD (V1)
- | | HOOK | Input | (V2) Hook input interrupt
- | PC15 | SPI2CLK | Output | (V1) 2nd SPI CLK
- | | F_RY_BY | Input | (V2) NAND F_RY_BY
- | PE17 | F_ALE | Output | NAND F_ALE
- | PE18 | F_CLE | Output | NAND F_CLE
- | PE20 | F_CE | Output | NAND F_CE
- | PE24 | SPICS_SCOUT | Output | (V1) Codec chip select
- | | LED | Output | (V2) LED
- | PE27 | SPICS_ER | Output | External serial register CS
- | PE28 | LEDIO1 | Output | (V1) LED
- | | BKBR1 | Input | (V2) Keyboard input scan
- | PE29 | LEDIO2 | Output | (V1) LED hook for A (TA2)
- | | BKBR2 | Input | (V2) Keyboard input scan
- | PE30 | LEDIO3 | Output | (V1) LED hook for A (TA2)
- | | BKBR3 | Input | (V2) Keyboard input scan
- | PE31 | F_RY_BY | Input | (V1) NAND F_RY_BY
- | | BKBR4 | Input | (V2) Keyboard input scan
- +------+----------------+--------+---------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Serial register input:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | 4 | HOOK | Hook switch
- | 5 | BT_LINK | Bluetooth link status
- | 6 | HOST_WAKE | Bluetooth host wake up
- | 7 | OK_ETH | Cisco inline power OK status
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Chip selects:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | CS0 | CS0 | Boot flash
- | CS1 | CS_FLASH | NAND flash
- | CS2 | CS_DSP | DSP
- | CS3 | DCS_DRAM | DRAM
- | CS4 | CS_FLASH2 | (V2) 2nd flash
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Interrupts:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | IRQ1 | IRQ_DSP | DSP interrupt
- | IRQ3 | S_INTER | DUSLIC ???
- | IRQ4 | F_RY_BY | NAND
- | IRQ7 | IRQ_MAX | MAX 3100 interrupt
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Interrupts on PCMCIA pins:
-
- +------+----------------+------------------------------------------------------------
- | # | Name | Comment
- +------+----------------+------------------------------------------------------------
- | IP_A0| PHY1_LINK | Link status changed for #1 Ethernet interface
- | IP_A1| PHY2_LINK | Link status changed for #2 Ethernet interface
- | IP_A2| RMII1_MDINT | PHY interrupt for #1
- | IP_A3| RMII2_MDINT | PHY interrupt for #2
- | IP_A5| HOST_WAKE | (V2) Bluetooth host wake
- | IP_A6| OK_ETH | (V2) Cisco inline power OK
- +------+----------------+------------------------------------------------------------
-
-**************************************************************************************************/
-
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1
-#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE 1
-
-/*************************************************************************************************/
-
-/* use board specific hardware */
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_HW_WATCHDOG
-
-/*************************************************************************************************/
-
-#define CONFIG_CDP_DEVICE_ID 20
-#define CONFIG_CDP_DEVICE_ID_PREFIX "NT" /* netta2 */
-#define CONFIG_CDP_PORT_ID "eth%d"
-#define CONFIG_CDP_CAPABILITIES 0x00000010
-#define CONFIG_CDP_VERSION "u-boot" " " U_BOOT_DATE " " U_BOOT_TIME
-#define CONFIG_CDP_PLATFORM "Intracom NetTA2"
-#define CONFIG_CDP_TRIGGER 0x20020001
-#define CONFIG_CDP_POWER_CONSUMPTION 4300 /* 90 mA @ 48V */
-#define CONFIG_CDP_APPLIANCE_VLAN_TYPE 0x01 /* ipphone ? */
-
-/*************************************************************************************************/
-
-#define CONFIG_AUTO_COMPLETE 1
-
-/*************************************************************************************************/
-
-#define CONFIG_CRC32_VERIFY 1
-
-/*************************************************************************************************/
-
-#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE 1
-
-/*************************************************************************************************/
-#endif /* __CONFIG_H */
diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h
index 8601eec..ac75b9c 100644
--- a/include/configs/P1023RDS.h
+++ b/include/configs/P1023RDS.h
@@ -14,23 +14,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#ifdef CONFIG_NAND
-#define CONFIG_NAND_U_BOOT
-#define CONFIG_RAMBOOT_NAND
-#endif
-
-#ifdef CONFIG_NAND_U_BOOT
-#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
-#define CONFIG_SYS_TEXT_BASE 0x11001000
-
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
-#else
-#define CONFIG_SYS_LDSCRIPT $(CPUDIR)/u-boot-nand.lds
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-#endif /* CONFIG_NAND_SPL */
-#endif
-
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE 0xeff40000
#endif
@@ -162,7 +145,6 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_BCSR_BASE 0xe0000000 /* start of on board FPGA */
#define CONFIG_SYS_BCSR_BASE_PHYS CONFIG_SYS_BCSR_BASE
-#ifndef CONFIG_NAND
#define CONFIG_SYS_FLASH_BASE 0xee000000 /* start of FLASH 32M */
#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
@@ -179,11 +161,8 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#else
-#define CONFIG_SYS_NO_FLASH
-#endif
-#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND)
+#if defined(CONFIG_SYS_SPL)
#define CONFIG_SYS_RAMBOOT
#endif
@@ -239,17 +218,6 @@ extern unsigned long get_clock_freq(void);
| OR_FCM_TRLX \
| OR_FCM_EHTR)
-#ifdef CONFIG_RAMBOOT_NAND
-/* NAND Base Address */
-#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM
-#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-/* chip select 1 - BCSR */
-#define CONFIG_SYS_BR1_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_BCSR_BASE_PHYS) \
- | BR_MS_GPCM | BR_PS_8 | BR_V)
-#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_GPCM_CSNT | OR_GPCM_XACS \
- | OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR \
- | OR_GPCM_EAD)
-#else
#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
/* chip select 1 - BCSR */
@@ -258,7 +226,6 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_GPCM_CSNT | OR_GPCM_XACS \
| OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR \
| OR_GPCM_EAD)
-#endif
/* Serial Port
* open - index 2
@@ -381,15 +348,9 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_ENV_OVERWRITE
#if defined(CONFIG_SYS_RAMBOOT)
-#if defined(CONFIG_RAMBOOT_NAND)
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_OFFSET ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
-#else
#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x4000)
#define CONFIG_ENV_SIZE 0x2000
-#endif
#else
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
@@ -496,15 +457,10 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_PHY_MARVELL
#endif
-#ifndef CONFIG_NAND
/* Default address of microcode for the Linux Fman driver */
/* QE microcode/firmware address */
#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
-#else
-#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
-#define CONFIG_SYS_FMAN_FW_ADDR 0x1f00000
-#endif
#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
diff --git a/include/configs/QS823.h b/include/configs/QS823.h
deleted file mode 100644
index 6733460..0000000
--- a/include/configs/QS823.h
+++ /dev/null
@@ -1,551 +0,0 @@
-/*
- * (C) Copyright 2003
- * MuLogic B.V.
- *
- * (C) Copyright 2002
- * Simple Network Magic Corporation
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* various debug settings */
-#undef CONFIG_SYS_DEVICE_NULLDEV /* null device */
-#undef CONFIG_SILENT_CONSOLE /* silent console */
-#undef CONFIG_SYS_CONSOLE_INFO_QUIET /* silent console ? */
-#undef DEBUG_FLASH /* debug flash code */
-#undef FLASH_DEBUG /* debug fash code */
-#undef DEBUG_ENV /* debug environment code */
-
-#define CONFIG_SYS_DIRECT_FLASH_TFTP 1 /* allow direct tftp to flash */
-#define CONFIG_ENV_OVERWRITE 1 /* allow overwrite MAC address */
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_MPC823 1 /* This is a MPC823 CPU */
-#define CONFIG_QS823 1 /* ...on a QS823 module */
-#define CONFIG_SCC2_ENET 1 /* SCC2 10BaseT ethernet */
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-
-/* Select the target clock speed */
-#undef CONFIG_CLOCK_16MHZ /* cpu=16,777,216 Hz, mem=16Mhz */
-#undef CONFIG_CLOCK_33MHZ /* cpu=33,554,432 Hz, mem=33Mhz */
-#undef CONFIG_CLOCK_50MHZ /* cpu=49,971,200 Hz, mem=33Mhz */
-#define CONFIG_CLOCK_66MHZ 1 /* cpu=67,108,864 Hz, mem=66Mhz */
-#undef CONFIG_CLOCK_80MHZ /* cpu=79,986,688 Hz, mem=33Mhz */
-
-#ifdef CONFIG_CLOCK_16MHZ
-#define CONFIG_CLOCK_MULT 512
-#endif
-
-#ifdef CONFIG_CLOCK_33MHZ
-#define CONFIG_CLOCK_MULT 1024
-#endif
-
-#ifdef CONFIG_CLOCK_50MHZ
-#define CONFIG_CLOCK_MULT 1525
-#endif
-
-#ifdef CONFIG_CLOCK_66MHZ
-#define CONFIG_CLOCK_MULT 2048
-#endif
-
-#ifdef CONFIG_CLOCK_80MHZ
-#define CONFIG_CLOCK_MULT 2441
-#endif
-
-/* choose flash size, 4Mb or 8Mb */
-#define CONFIG_FLASH_4MB 1 /* board has 4Mb flash */
-#undef CONFIG_FLASH_8MB /* board has 8Mb flash */
-
-#define CONFIG_CLOCK_BASE 32768 /* Base clock input freq */
-
-#undef CONFIG_8xx_CONS_SMC1
-#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */
-#undef CONFIG_8xx_CONS_NONE
-
-#define CONFIG_BAUDRATE 38400 /* console baudrate = 38.4kbps */
-
-#undef CONFIG_CLOCKS_IN_MHZ /* clocks passsed to Linux in MHz */
-
-/* Define default IP addresses */
-#define CONFIG_IPADDR 192.168.1.99 /* own ip address */
-#define CONFIG_SERVERIP 192.168.1.19 /* used for tftp (not nfs?) */
-
-/* message to say directly after booting */
-#define CONFIG_PREBOOT "echo '';" \
- "echo 'type:';" \
- "echo 'run boot_nfs to boot to NFS';" \
- "echo 'run boot_flash to boot to flash';" \
- "echo '';" \
- "echo 'run flash_rootfs to install a new rootfs';" \
- "echo 'run flash_env to clear the env sector';" \
- "echo 'run flash_rw to clear the rw fs';" \
- "echo 'run flash_uboot to install a new u-boot';" \
- "echo 'run flash_kernel to install a new kernel';"
-
-/* wait 5 seconds before executing CONFIG_BOOTCOMMAND */
-#define CONFIG_BOOTDELAY 5
-#define CONFIG_BOOTCOMMAND "run boot_nfs"
-
-#undef CONFIG_BOOTARGS /* made by set_nfs of set_flash */
-
-/* Our flash filesystem looks like this
- *
- * 4Mb board:
- * ffc0 0000 - ffeb ffff root filesystem (jffs2) (~3Mb)
- * ffec 0000 - ffed ffff read-write filesystem (ext2)
- * ffee 0000 - ffef ffff environment
- * fff0 0000 - fff1 ffff u-boot
- * fff2 0000 - ffff ffff linux kernel
- *
- * 8Mb board:
- * ff80 0000 - ffeb ffff root filesystem (jffs2) (~7Mb)
- * ffec 0000 - ffed ffff read-write filesystem (ext2)
- * ffee 0000 - ffef ffff environment
- * fff0 0000 - fff1 ffff u-boot
- * fff2 0000 - ffff ffff linux kernel
- *
- */
-
-/* environment for 4Mb board */
-#ifdef CONFIG_FLASH_4MB
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "serial#=QS823\0" \
- "hostname=qs823\0" \
- "netdev=eth0\0" \
- "ethaddr=00:01:02:B4:36:56\0" \
- "rootpath=/exports/rootfs\0" \
- "mtdparts=mtdparts=phys:2816k(root),128k(rw),128k(env),128k(u-boot),-(kernel)\0" \
- /* fill in variables */ \
- "set_ip=setenv ip ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off\0" \
- "set_nfs=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath $ip init=/sbin/init $mtdparts\0" \
- "set_flash=setenv bootargs root=/dev/mtdblock1 ro $ip init=/sbin/init $mtdparts\0" \
- /* commands */ \
- "boot_nfs=run set_ip; run set_nfs; tftp 0x400000 /tftpboot/vmlinux.UBoot; bootm 0x400000\0" \
- "boot_flash=run set_ip; run set_flash; bootm fff20000\0" \
- /* reinstall flash parts */ \
- "flash_rootfs=protect off ffc00000 ffebffff; era ffc00000 ffebffff; tftp ffc00000 /tftpboot/rootfs.jffs2\0" \
- "flash_rw=protect off ffec0000 ffedffff; era ffec0000 ffedffff\0" \
- "flash_env=protect off ffee0000 ffefffff; era ffee0000 ffefffff\0" \
- "flash_uboot=protect off fff00000 fff1ffff; era fff00000 fff1ffff; tftp fff00000 /tftpboot/u-boot.4mb.bin\0" \
- "flash_kernel=protect off fff20000 ffffffff; era fff20000 ffffffff; tftp fff20000 /tftpboot/vmlinux.UBoot\0"
-#endif /* CONFIG_FLASH_4MB */
-
-/* environment for 8Mb board */
-#ifdef CONFIG_FLASH_8MB
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "serial#=QS823\0" \
- "hostname=qs823\0" \
- "netdev=eth0\0" \
- "ethaddr=00:01:02:B4:36:56\0" \
- "rootpath=/exports/rootfs\0" \
- "mtdparts=mtdparts=phys:6912k(root),128k(rw),128k(env),128k(u-boot),-(kernel)\0" \
- /* fill in variables */ \
- "set_ip=setenv ip ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off\0" \
- "set_nfs=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath $ip init=/sbin/init $mtdparts\0" \
- "set_flash=setenv bootargs root=/dev/mtdblock1 ro $ip init=/sbin/init $mtdparts\0" \
- /* commands */ \
- "boot_nfs=run set_ip; run set_nfs; tftp 0x400000 /tftpboot/vmlinux.UBoot; bootm 0x400000\0" \
- "boot_flash=run set_ip; run set_flash; bootm fff20000\0" \
- /* reinstall flash parts */ \
- "flash_rootfs=protect off ff800000 ffebffff; era ff800000 ffebffff; tftp ff800000 /tftpboot/rootfs.jffs2\0" \
- "flash_rw=protect off ffec0000 ffedffff; era ffec0000 ffedffff\0" \
- "flash_env=protect off ffee0000 ffefffff; era ffee0000 ffefffff\0" \
- "flash_uboot=protect off fff00000 fff1ffff; era fff00000 fff1ffff; tftp fff00000 /tftpboot/u-boot.8mb.bin\0" \
- "flash_kernel=protect off fff20000 ffffffff; era fff20000 ffffffff; tftp fff20000 /tftpboot/vmlinux.UBoot\0"
-#endif /* CONFIG_FLASH_8MB */
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-#undef CONFIG_STATUS_LED /* Status LED disabled */
-#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-#undef CONFIG_MAC_PARTITION
-#undef CONFIG_DOS_PARTITION
-
-#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_CONSOLE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_RUN
-
-
-/*-----------------------------------------------------------------------
- * Environment variable storage is in FLASH, one sector before U-boot
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128Kb, one whole sector */
-#define CONFIG_ENV_SIZE 0x2000 /* 8kb */
-#define CONFIG_ENV_ADDR 0xffee0000 /* address of env sector */
-
-/*-----------------------------------------------------------------------
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-
-#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */
-
-/*-----------------------------------------------------------------------
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFF000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0xFF800000 /* Allow an 8Mbyte window */
-
-#define FLASH_BASE0_4M_PRELIM 0xFFC00000 /* Base for 4M Flash */
-#define FLASH_BASE0_8M_PRELIM 0xFF800000 /* Base for 8M Flash */
-
-#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE 0xFFF00000 /* U-boot location */
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * TODO flash parameters
- * FLASH organization for Intel Strataflash
- */
-#undef CONFIG_SYS_FLASH_16BIT /* 32-bit wide flash memory */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-
-#ifdef CONFIG_WATCHDOG
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWE | SYPCR_SWRI | SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWRI | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DLK | SIUMCR_DPC | SIUMCR_MPRE | SIUMCR_MLRC01 | SIUMCR_GB5E)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- */
-
-/* MF (Multiplication Factor of SPLL) */
-/* Sets the QS823 to specified clock from 32KHz clock at EXTAL. */
-#define vPLPRCR_MF ((CONFIG_CLOCK_MULT+1) << 20)
-#define CONFIG_SYS_PLPRCR (vPLPRCR_MF | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | PLPRCR_LOLRE)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- */
-#if defined(CONFIG_CLOCK_16MHZ) || defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_50MHZ)
-#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_EBDF00 | SCCR_DFBRG00)
-#define CONFIG_SYS_BRGCLK_PRESCALE 1
-#endif
-
-#if defined(CONFIG_CLOCK_66MHZ)
-#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_EBDF00 | SCCR_DFBRG01)
-#define CONFIG_SYS_BRGCLK_PRESCALE 4
-#endif
-
-#if defined(CONFIG_CLOCK_80MHZ)
-#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_EBDF01 | SCCR_DFBRG01)
-#define CONFIG_SYS_BRGCLK_PRESCALE 4
-#endif
-
-#define SCCR_MASK CONFIG_SYS_SCCR
-
-/*-----------------------------------------------------------------------
- * Debug Enable Register
- * 0x73E67C0F - All interrupts handled by BDM
- * 0x00824001 - Only interrupts needed by MWDebug.exe handled by BDM
- *-----------------------------------------------------------------------
-#define CONFIG_SYS_DER 0x73E67C0F
-#define CONFIG_SYS_DER 0x0082400F
-
- #-------------------------------------------------------------------------
- # Program the Debug Enable Register (DER). This register provides the user
- # with the reason for entering into the debug mode. We want all conditions
- # to end up as an exception. We don't want to enter into debug mode for
- # any condition. See the back of of the Development Support section of the
- # MPC860 User Manual for a description of this register.
- #-------------------------------------------------------------------------
-*/
-#define CONFIG_SYS_DER 0
-
-/*-----------------------------------------------------------------------
- * Memory Controller Initialization Constants
- *-----------------------------------------------------------------------
- */
-
-/*
- * BR0 and OR0 (AMD dual FLASH devices)
- * Base address = 0xFFF0_0000 - 0xFFF7_FFFF (After relocation)
- */
-#define CONFIG_SYS_PRELIM_OR_AM
-#define CONFIG_SYS_OR_TIMING_FLASH
-
-/*
- *-----------------------------------------------------------------------
- * Base Register 0 (BR0): Bank 0 is assigned to the 8Mbyte (2M X 32)
- * flash that resides on the QS823.
- *-----------------------------------------------------------------------
- */
-
-/* BA (Base Address) = 0xFF80+0b for a total of 17 bits. 17 bit base addr */
-/* represents a minumum 32K block size. */
-#define vBR0_BA ((0xFF80 << 16) + (0 << 15))
-#define CONFIG_SYS_BR0_PRELIM (vBR0_BA | BR_V)
-
-/* AM (Address Mask) = 0xFF80+0b = We've masked the upper 9 bits */
-/* which defines a 8 Mbyte memory block. */
-#define vOR0_AM ((0xFF80 << 16) + (0 << 15))
-
-#if defined(CONFIG_CLOCK_50MHZ) || defined(CONFIG_CLOCK_80MHZ)
-/* 0101 = Add a 5 clock cycle wait state */
-#define CONFIG_SYS_OR0_PRELIM (vOR0_AM | OR_CSNT_SAM | 0R_ACS_DIV4 | OR_BI | OR_SCY_5_CLK)
-#endif
-
-#if defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_66MHZ)
-/* 0011 = Add a 3 clock cycle wait state */
-/* 29.8ns clock * (3 + 2) = 149ns cycle time */
-#define CONFIG_SYS_OR0_PRELIM (vOR0_AM | OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK)
-#endif
-
-#if defined(CONFIG_CLOCK_16MHZ)
-/* 0010 = Add a 2 clock cycle wait state */
-#define CONFIG_SYS_OR0_PRELIM (vOR0_AM | OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_2_CLK)
-#endif
-
-/*
- * BR1 and OR1 (SDRAM)
- * Base Address = 0x00000000 - 0x00FF_FFFF (16M After relocation)
- * Base Address = 0x00000000 - 0x01FF_FFFF (32M After relocation)
- * Base Address = 0x00000000 - 0x03FF_FFFF (64M After relocation)
- * Base Address = 0x00000000 - 0x07FF_FFFF (128M After relocation)
- */
-
-#define SDRAM_BASE 0x00000000 /* SDRAM bank */
-#define SDRAM_PRELIM_OR_AM 0xF8000000 /* map max. 128 MB */
-
-/* AM (Address Mask) = 0xF800+0b = We've masked the upper 5 bits which
- * represents a 128 Mbyte block the DRAM in
- * this address base.
- */
-#define vOR1_AM ((0xF800 << 16) + (0 << 15))
-#define vBR1_BA ((0x0000 << 16) + (0 << 15))
-#define CONFIG_SYS_OR1 (vOR1_AM | OR_CSNT_SAM | OR_BI)
-#define CONFIG_SYS_BR1 (vBR1_BA | BR_MS_UPMA | BR_V)
-
-/* Machine A Mode Register */
-
-/* PTA Periodic Timer A */
-
-#if defined(CONFIG_CLOCK_80MHZ)
-#define vMAMR_PTA (19 << 24)
-#endif
-
-#if defined(CONFIG_CLOCK_66MHZ)
-#define vMAMR_PTA (16 << 24)
-#endif
-
-#if defined(CONFIG_CLOCK_50MHZ)
-#define vMAMR_PTA (195 << 24)
-#endif
-
-#if defined(CONFIG_CLOCK_33MHZ)
-#define vMAMR_PTA (131 << 24)
-#endif
-
-#if defined(CONFIG_CLOCK_16MHZ)
-#define vMAMR_PTA (65 << 24)
-#endif
-
-/* For boards with 16M of SDRAM */
-#define SDRAM_16M_MAX_SIZE 0x01000000 /* max 16MB SDRAM */
-#define CONFIG_SYS_16M_MAMR (vMAMR_PTA | MAMR_AMA_TYPE_0 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A11 |\
-MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-/* For boards with 32M of SDRAM */
-#define SDRAM_32M_MAX_SIZE 0x02000000 /* max 32MB SDRAM */
-#define CONFIG_SYS_32M_MAMR (vMAMR_PTA | MAMR_AMA_TYPE_1 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A10 |\
-MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-
-/* Memory Periodic Timer Prescaler Register */
-
-#if defined(CONFIG_CLOCK_66MHZ) || defined(CONFIG_CLOCK_80MHZ)
-/* Divide by 32 */
-#define CONFIG_SYS_MPTPR 0x02
-#endif
-
-#if defined(CONFIG_CLOCK_16MHZ) || defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_50MHZ)
-/* Divide by 16 */
-#define CONFIG_SYS_MPTPR 0x04
-#endif
-
-/*
- * BR2 and OR2 (Unused)
- * Base address = 0xF020_0000 - 0xF020_0FFF
- *
- */
-#define CONFIG_SYS_OR2_PRELIM 0xFFF00000
-#define CONFIG_SYS_BR2_PRELIM 0xF0200000
-
-/*
- * BR3 and OR3 (External Bus CS3)
- * Base address = 0xF030_0000 - 0xF030_0FFF
- *
- */
-#define CONFIG_SYS_OR3_PRELIM 0xFFF00000
-#define CONFIG_SYS_BR3_PRELIM 0xF0300000
-
-/*
- * BR4 and OR4 (External Bus CS3)
- * Base address = 0xF040_0000 - 0xF040_0FFF
- *
- */
-#define CONFIG_SYS_OR4_PRELIM 0xFFF00000
-#define CONFIG_SYS_BR4_PRELIM 0xF0400000
-
-
-/*
- * BR4 and OR4 (External Bus CS3)
- * Base address = 0xF050_0000 - 0xF050_0FFF
- *
- */
-#define CONFIG_SYS_OR5_PRELIM 0xFFF00000
-#define CONFIG_SYS_BR5_PRELIM 0xF0500000
-
-/*
- * BR6 and OR6 (Unused)
- * Base address = 0xF060_0000 - 0xF060_0FFF
- *
- */
-#define CONFIG_SYS_OR6_PRELIM 0xFFF00000
-#define CONFIG_SYS_BR6_PRELIM 0xF0600000
-
-/*
- * BR7 and OR7 (Unused)
- * Base address = 0xF070_0000 - 0xF070_0FFF
- *
- */
-#define CONFIG_SYS_OR7_PRELIM 0xFFF00000
-#define CONFIG_SYS_BR7_PRELIM 0xF0700000
-
-/*
- * Sanity checks
- */
-#if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET)
-#error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured
-#endif
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/QS850.h b/include/configs/QS850.h
deleted file mode 100644
index f114213..0000000
--- a/include/configs/QS850.h
+++ /dev/null
@@ -1,551 +0,0 @@
-/*
- * (C) Copyright 2003
- * MuLogic B.V.
- *
- * (C) Copyright 2002
- * Simple Network Magic Corporation
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* various debug settings */
-#undef CONFIG_SYS_DEVICE_NULLDEV /* null device */
-#undef CONFIG_SILENT_CONSOLE /* silent console */
-#undef CONFIG_SYS_CONSOLE_INFO_QUIET /* silent console ? */
-#undef DEBUG_FLASH /* debug flash code */
-#undef FLASH_DEBUG /* debug fash code */
-#undef DEBUG_ENV /* debug environment code */
-
-#define CONFIG_SYS_DIRECT_FLASH_TFTP 1 /* allow direct tftp to flash */
-#define CONFIG_ENV_OVERWRITE 1 /* allow overwrite MAC address */
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_MPC850 1 /* This is a MPC850 CPU */
-#define CONFIG_QS850 1 /* ...on a QS850 module */
-#define CONFIG_SCC2_ENET 1 /* SCC2 10BaseT ethernet */
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-
-/* Select the target clock speed */
-#undef CONFIG_CLOCK_16MHZ /* cpu=16,777,216 Hz, mem=16Mhz */
-#undef CONFIG_CLOCK_33MHZ /* cpu=33,554,432 Hz, mem=33Mhz */
-#undef CONFIG_CLOCK_50MHZ /* cpu=49,971,200 Hz, mem=33Mhz */
-#define CONFIG_CLOCK_66MHZ 1 /* cpu=67,108,864 Hz, mem=66Mhz */
-#undef CONFIG_CLOCK_80MHZ /* cpu=79,986,688 Hz, mem=33Mhz */
-
-#ifdef CONFIG_CLOCK_16MHZ
-#define CONFIG_CLOCK_MULT 512
-#endif
-
-#ifdef CONFIG_CLOCK_33MHZ
-#define CONFIG_CLOCK_MULT 1024
-#endif
-
-#ifdef CONFIG_CLOCK_50MHZ
-#define CONFIG_CLOCK_MULT 1525
-#endif
-
-#ifdef CONFIG_CLOCK_66MHZ
-#define CONFIG_CLOCK_MULT 2048
-#endif
-
-#ifdef CONFIG_CLOCK_80MHZ
-#define CONFIG_CLOCK_MULT 2441
-#endif
-
-/* choose flash size, 4Mb or 8Mb */
-#define CONFIG_FLASH_4MB 1 /* board has 4Mb flash */
-#undef CONFIG_FLASH_8MB /* board has 8Mb flash */
-
-#define CONFIG_CLOCK_BASE 32768 /* Base clock input freq */
-
-#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-
-#define CONFIG_BAUDRATE 38400 /* console baudrate = 38.4kbps */
-
-#undef CONFIG_CLOCKS_IN_MHZ /* clocks passsed to Linux in MHz */
-
-/* Define default IP addresses */
-#define CONFIG_IPADDR 192.168.1.99 /* own ip address */
-#define CONFIG_SERVERIP 192.168.1.19 /* used for tftp (not nfs?) */
-
-/* message to say directly after booting */
-#define CONFIG_PREBOOT "echo '';" \
- "echo 'type:';" \
- "echo 'run boot_nfs to boot to NFS';" \
- "echo 'run boot_flash to boot to flash';" \
- "echo '';" \
- "echo 'run flash_rootfs to install a new rootfs';" \
- "echo 'run flash_env to clear the env sector';" \
- "echo 'run flash_rw to clear the rw fs';" \
- "echo 'run flash_uboot to install a new u-boot';" \
- "echo 'run flash_kernel to install a new kernel';"
-
-/* wait 5 seconds before executing CONFIG_BOOTCOMMAND */
-#define CONFIG_BOOTDELAY 5
-#define CONFIG_BOOTCOMMAND "run boot_nfs"
-
-#undef CONFIG_BOOTARGS /* made by set_nfs of set_flash */
-
-/* Our flash filesystem looks like this
- *
- * 4Mb board:
- * ffc0 0000 - ffeb ffff root filesystem (jffs2) (~3Mb)
- * ffec 0000 - ffed ffff read-write filesystem (ext2)
- * ffee 0000 - ffef ffff environment
- * fff0 0000 - fff1 ffff u-boot
- * fff2 0000 - ffff ffff linux kernel
- *
- * 8Mb board:
- * ff80 0000 - ffeb ffff root filesystem (jffs2) (~7Mb)
- * ffec 0000 - ffed ffff read-write filesystem (ext2)
- * ffee 0000 - ffef ffff environment
- * fff0 0000 - fff1 ffff u-boot
- * fff2 0000 - ffff ffff linux kernel
- *
- */
-
-/* environment for 4Mb board */
-#ifdef CONFIG_FLASH_4MB
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "serial#=QS850\0" \
- "hostname=qs850\0" \
- "netdev=eth0\0" \
- "ethaddr=00:01:02:B4:36:56\0" \
- "rootpath=/exports/rootfs\0" \
- "mtdparts=mtdparts=phys:2816k(root),128k(rw),128k(env),128k(u-boot),-(kernel)\0" \
- /* fill in variables */ \
- "set_ip=setenv ip ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off\0" \
- "set_nfs=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath $ip init=/sbin/init $mtdparts\0" \
- "set_flash=setenv bootargs root=/dev/mtdblock1 ro $ip init=/sbin/init $mtdparts\0" \
- /* commands */ \
- "boot_nfs=run set_ip; run set_nfs; tftp 0x400000 /tftpboot/vmlinux.UBoot; bootm 0x400000\0" \
- "boot_flash=run set_ip; run set_flash; bootm fff20000\0" \
- /* reinstall flash parts */ \
- "flash_rootfs=protect off ffc00000 ffebffff; era ffc00000 ffebffff; tftp ffc00000 /tftpboot/rootfs.jffs2\0" \
- "flash_rw=protect off ffec0000 ffedffff; era ffec0000 ffedffff\0" \
- "flash_env=protect off ffee0000 ffefffff; era ffee0000 ffefffff\0" \
- "flash_uboot=protect off fff00000 fff1ffff; era fff00000 fff1ffff; tftp fff00000 /tftpboot/u-boot.4mb.bin\0" \
- "flash_kernel=protect off fff20000 ffffffff; era fff20000 ffffffff; tftp fff20000 /tftpboot/vmlinux.UBoot\0"
-#endif /* CONFIG_FLASH_4MB */
-
-/* environment for 8Mb board */
-#ifdef CONFIG_FLASH_8MB
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "serial#=QS850\0" \
- "hostname=qs850\0" \
- "netdev=eth0\0" \
- "ethaddr=00:01:02:B4:36:56\0" \
- "rootpath=/exports/rootfs\0" \
- "mtdparts=mtdparts=phys:6912k(root),128k(rw),128k(env),128k(u-boot),-(kernel)\0" \
- /* fill in variables */ \
- "set_ip=setenv ip ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off\0" \
- "set_nfs=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath $ip init=/sbin/init $mtdparts\0" \
- "set_flash=setenv bootargs root=/dev/mtdblock1 ro $ip init=/sbin/init $mtdparts\0" \
- /* commands */ \
- "boot_nfs=run set_ip; run set_nfs; tftp 0x400000 /tftpboot/vmlinux.UBoot; bootm 0x400000\0" \
- "boot_flash=run set_ip; run set_flash; bootm fff20000\0" \
- /* reinstall flash parts */ \
- "flash_rootfs=protect off ff800000 ffebffff; era ff800000 ffebffff; tftp ff800000 /tftpboot/rootfs.jffs2\0" \
- "flash_rw=protect off ffec0000 ffedffff; era ffec0000 ffedffff\0" \
- "flash_env=protect off ffee0000 ffefffff; era ffee0000 ffefffff\0" \
- "flash_uboot=protect off fff00000 fff1ffff; era fff00000 fff1ffff; tftp fff00000 /tftpboot/u-boot.8mb.bin\0" \
- "flash_kernel=protect off fff20000 ffffffff; era fff20000 ffffffff; tftp fff20000 /tftpboot/vmlinux.UBoot\0"
-#endif /* CONFIG_FLASH_8MB */
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-#undef CONFIG_STATUS_LED /* Status LED disabled */
-#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#undef CONFIG_MAC_PARTITION
-#undef CONFIG_DOS_PARTITION
-
-#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-
-
-/*
- * Command line configuration.
- */
-
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_CONSOLE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_RUN
-
-
-/*-----------------------------------------------------------------------
- * Environment variable storage is in FLASH, one sector before U-boot
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128Kb, one whole sector */
-#define CONFIG_ENV_SIZE 0x2000 /* 8kb */
-#define CONFIG_ENV_ADDR 0xffee0000 /* address of env sector */
-
-/*-----------------------------------------------------------------------
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-
-#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */
-
-/*-----------------------------------------------------------------------
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFF000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0xFF800000 /* Allow an 8Mbyte window */
-
-#define FLASH_BASE0_4M_PRELIM 0xFFC00000 /* Base for 4M Flash */
-#define FLASH_BASE0_8M_PRELIM 0xFF800000 /* Base for 8M Flash */
-
-#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE 0xFFF00000 /* U-boot location */
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * TODO flash parameters
- * FLASH organization for Intel Strataflash
- */
-#undef CONFIG_SYS_FLASH_16BIT /* 32-bit wide flash memory */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-
-#ifdef CONFIG_WATCHDOG
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWE | SYPCR_SWRI | SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWRI | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DLK | SIUMCR_DPC | SIUMCR_MPRE | SIUMCR_MLRC01 | SIUMCR_GB5E)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- */
-
-/* MF (Multiplication Factor of SPLL) */
-/* Sets the QS850 to specified clock from 32KHz clock at EXTAL. */
-#define vPLPRCR_MF ((CONFIG_CLOCK_MULT+1) << 20)
-#define CONFIG_SYS_PLPRCR (vPLPRCR_MF | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | PLPRCR_LOLRE)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- */
-#if defined(CONFIG_CLOCK_16MHZ) || defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_50MHZ)
-#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_EBDF00 | SCCR_DFBRG00)
-#define CONFIG_SYS_BRGCLK_PRESCALE 1
-#endif
-
-#if defined(CONFIG_CLOCK_66MHZ)
-#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_EBDF00 | SCCR_DFBRG01)
-#define CONFIG_SYS_BRGCLK_PRESCALE 4
-#endif
-
-#if defined(CONFIG_CLOCK_80MHZ)
-#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_EBDF01 | SCCR_DFBRG01)
-#define CONFIG_SYS_BRGCLK_PRESCALE 4
-#endif
-
-#define SCCR_MASK CONFIG_SYS_SCCR
-
-/*-----------------------------------------------------------------------
- * Debug Enable Register
- * 0x73E67C0F - All interrupts handled by BDM
- * 0x00824001 - Only interrupts needed by MWDebug.exe handled by BDM
- *-----------------------------------------------------------------------
-#define CONFIG_SYS_DER 0x73E67C0F
-#define CONFIG_SYS_DER 0x0082400F
-
- #-------------------------------------------------------------------------
- # Program the Debug Enable Register (DER). This register provides the user
- # with the reason for entering into the debug mode. We want all conditions
- # to end up as an exception. We don't want to enter into debug mode for
- # any condition. See the back of of the Development Support section of the
- # MPC860 User Manual for a description of this register.
- #-------------------------------------------------------------------------
-*/
-#define CONFIG_SYS_DER 0
-
-/*-----------------------------------------------------------------------
- * Memory Controller Initialization Constants
- *-----------------------------------------------------------------------
- */
-
-/*
- * BR0 and OR0 (AMD dual FLASH devices)
- * Base address = 0xFFF0_0000 - 0xFFF7_FFFF (After relocation)
- */
-#define CONFIG_SYS_PRELIM_OR_AM
-#define CONFIG_SYS_OR_TIMING_FLASH
-
-/*
- *-----------------------------------------------------------------------
- * Base Register 0 (BR0): Bank 0 is assigned to the 8Mbyte (2M X 32)
- * flash that resides on the QS850.
- *-----------------------------------------------------------------------
- */
-
-/* BA (Base Address) = 0xFF80+0b for a total of 17 bits. 17 bit base addr */
-/* represents a minumum 32K block size. */
-#define vBR0_BA ((0xFF80 << 16) + (0 << 15))
-#define CONFIG_SYS_BR0_PRELIM (vBR0_BA | BR_V)
-
-/* AM (Address Mask) = 0xFF80+0b = We've masked the upper 9 bits */
-/* which defines a 8 Mbyte memory block. */
-#define vOR0_AM ((0xFF80 << 16) + (0 << 15))
-
-#if defined(CONFIG_CLOCK_50MHZ) || defined(CONFIG_CLOCK_80MHZ)
-/* 0101 = Add a 5 clock cycle wait state */
-#define CONFIG_SYS_OR0_PRELIM (vOR0_AM | OR_CSNT_SAM | 0R_ACS_DIV4 | OR_BI | OR_SCY_5_CLK)
-#endif
-
-#if defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_66MHZ)
-/* 0011 = Add a 3 clock cycle wait state */
-/* 29.8ns clock * (3 + 2) = 149ns cycle time */
-#define CONFIG_SYS_OR0_PRELIM (vOR0_AM | OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK)
-#endif
-
-#if defined(CONFIG_CLOCK_16MHZ)
-/* 0010 = Add a 2 clock cycle wait state */
-#define CONFIG_SYS_OR0_PRELIM (vOR0_AM | OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_2_CLK)
-#endif
-
-/*
- * BR1 and OR1 (SDRAM)
- * Base Address = 0x00000000 - 0x00FF_FFFF (16M After relocation)
- * Base Address = 0x00000000 - 0x01FF_FFFF (32M After relocation)
- * Base Address = 0x00000000 - 0x03FF_FFFF (64M After relocation)
- * Base Address = 0x00000000 - 0x07FF_FFFF (128M After relocation)
- */
-
-#define SDRAM_BASE 0x00000000 /* SDRAM bank */
-#define SDRAM_PRELIM_OR_AM 0xF8000000 /* map max. 128 MB */
-
-/* AM (Address Mask) = 0xF800+0b = We've masked the upper 5 bits which
- * represents a 128 Mbyte block the DRAM in
- * this address base.
- */
-#define vOR1_AM ((0xF800 << 16) + (0 << 15))
-#define vBR1_BA ((0x0000 << 16) + (0 << 15))
-#define CONFIG_SYS_OR1 (vOR1_AM | OR_CSNT_SAM | OR_BI)
-#define CONFIG_SYS_BR1 (vBR1_BA | BR_MS_UPMA | BR_V)
-
-/* Machine A Mode Register */
-
-/* PTA Periodic Timer A */
-
-#if defined(CONFIG_CLOCK_80MHZ)
-#define vMAMR_PTA (19 << 24)
-#endif
-
-#if defined(CONFIG_CLOCK_66MHZ)
-#define vMAMR_PTA (16 << 24)
-#endif
-
-#if defined(CONFIG_CLOCK_50MHZ)
-#define vMAMR_PTA (195 << 24)
-#endif
-
-#if defined(CONFIG_CLOCK_33MHZ)
-#define vMAMR_PTA (131 << 24)
-#endif
-
-#if defined(CONFIG_CLOCK_16MHZ)
-#define vMAMR_PTA (65 << 24)
-#endif
-
-/* For boards with 16M of SDRAM */
-#define SDRAM_16M_MAX_SIZE 0x01000000 /* max 16MB SDRAM */
-#define CONFIG_SYS_16M_MAMR (vMAMR_PTA | MAMR_AMA_TYPE_0 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A11 |\
-MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-/* For boards with 32M of SDRAM */
-#define SDRAM_32M_MAX_SIZE 0x02000000 /* max 32MB SDRAM */
-#define CONFIG_SYS_32M_MAMR (vMAMR_PTA | MAMR_AMA_TYPE_1 | MAMR_DSA_2_CYCL | MAMR_G0CLA_A10 |\
-MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-
-/* Memory Periodic Timer Prescaler Register */
-
-#if defined(CONFIG_CLOCK_66MHZ) || defined(CONFIG_CLOCK_80MHZ)
-/* Divide by 32 */
-#define CONFIG_SYS_MPTPR 0x02
-#endif
-
-#if defined(CONFIG_CLOCK_16MHZ) || defined(CONFIG_CLOCK_33MHZ) || defined(CONFIG_CLOCK_50MHZ)
-/* Divide by 16 */
-#define CONFIG_SYS_MPTPR 0x04
-#endif
-
-/*
- * BR2 and OR2 (Unused)
- * Base address = 0xF020_0000 - 0xF020_0FFF
- *
- */
-#define CONFIG_SYS_OR2_PRELIM 0xFFF00000
-#define CONFIG_SYS_BR2_PRELIM 0xF0200000
-
-/*
- * BR3 and OR3 (External Bus CS3)
- * Base address = 0xF030_0000 - 0xF030_0FFF
- *
- */
-#define CONFIG_SYS_OR3_PRELIM 0xFFF00000
-#define CONFIG_SYS_BR3_PRELIM 0xF0300000
-
-/*
- * BR4 and OR4 (External Bus CS3)
- * Base address = 0xF040_0000 - 0xF040_0FFF
- *
- */
-#define CONFIG_SYS_OR4_PRELIM 0xFFF00000
-#define CONFIG_SYS_BR4_PRELIM 0xF0400000
-
-
-/*
- * BR4 and OR4 (External Bus CS3)
- * Base address = 0xF050_0000 - 0xF050_0FFF
- *
- */
-#define CONFIG_SYS_OR5_PRELIM 0xFFF00000
-#define CONFIG_SYS_BR5_PRELIM 0xF0500000
-
-/*
- * BR6 and OR6 (Unused)
- * Base address = 0xF060_0000 - 0xF060_0FFF
- *
- */
-#define CONFIG_SYS_OR6_PRELIM 0xFFF00000
-#define CONFIG_SYS_BR6_PRELIM 0xF0600000
-
-/*
- * BR7 and OR7 (Unused)
- * Base address = 0xF070_0000 - 0xF070_0FFF
- *
- */
-#define CONFIG_SYS_OR7_PRELIM 0xFFF00000
-#define CONFIG_SYS_BR7_PRELIM 0xF0700000
-
-/*
- * Sanity checks
- */
-#if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET)
-#error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured
-#endif
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/QS860T.h b/include/configs/QS860T.h
deleted file mode 100644
index 9958c09..0000000
--- a/include/configs/QS860T.h
+++ /dev/null
@@ -1,390 +0,0 @@
-/*
- * (C) Copyright 2003
- * MuLogic B.V.
- *
- * (C) Copyright 2002
- * Simple Network Magic Corporation
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* various debug settings */
-#undef CONFIG_SYS_DEVICE_NULLDEV /* null device */
-#undef CONFIG_SILENT_CONSOLE /* silent console */
-#undef CONFIG_SYS_CONSOLE_INFO_QUIET /* silent console ? */
-#undef DEBUG_FLASH /* debug flash code */
-#undef FLASH_DEBUG /* debug fash code */
-#undef DEBUG_ENV /* debug environment code */
-
-#define CONFIG_SYS_DIRECT_FLASH_TFTP 1 /* allow direct tftp to flash */
-#define CONFIG_ENV_OVERWRITE 1 /* allow overwrite MAC address */
-
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC860 1 /* This is a MPC860 CPU */
-#define CONFIG_QS860T 1 /* ...on a QS860T module */
-
-/* Start address of 512K Socketed Flash */
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-
-#define CONFIG_FEC_ENET 1 /* FEC 10/100BaseT ethernet */
-#define CONFIG_MII
-#define FEC_INTERRUPT SIU_LEVEL1
-#undef CONFIG_SCC1_ENET /* SCC1 10BaseT ethernet */
-#define CONFIG_SYS_DISCOVER_PHY
-
-#undef CONFIG_8xx_CONS_SMC1
-#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC */
-#undef CONFIG_8xx_CONS_NONE
-
-#define CONFIG_BAUDRATE 38400 /* console baudrate = 38.4kbps */
-
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-
-/* Pass clocks to Linux 2.4.18 in Hz */
-#undef CONFIG_CLOCKS_IN_MHZ /* clocks passsed to Linux in MHz */
-
-#define CONFIG_PREBOOT "echo;" \
- "echo 'Type \\\"run flash_nfs\\\" to mount root filesystem over NFS';" \
- "echo"
-
-#undef CONFIG_BOOTARGS
-/* TODO compare against CADM860 */
-#define CONFIG_BOOTCOMMAND "bootp; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
- "bootm"
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-#undef CONFIG_STATUS_LED /* Status LED disabled */
-
-#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DATE
-
-
-/* TODO */
-#if 0
-/* Look at these */
-CONFIG_IPADDR
-CONFIG_SERVERIP
-CONFIG_I2C
-CONFIG_SPI
-#endif
-
-/*
- * Environment variable storage is in NVRAM
- */
-#define CONFIG_ENV_IS_IN_NVRAM 1
-#define CONFIG_ENV_SIZE 0x00001000 /* We use only the last 4K for PPCBoot */
-#define CONFIG_ENV_ADDR 0xD100E000
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-
-#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-/* TODO - size? */
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-/*-----------------------------------------------------------------------
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xF0000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0xFFF00000
-
-#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/* TODO flash parameters */
-/*-----------------------------------------------------------------------
- * FLASH organization for Intel Strataflash
- */
-#define CONFIG_SYS_FLASH_16BIT 1 /* 16-bit wide flash memory */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#undef CONFIG_ENV_IS_IN_FLASH
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (0xFFFFFF88 | SYPCR_SWE | SYPCR_SWRI)
-#else
-#define CONFIG_SYS_SYPCR 0xFFFFFF88
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_SIUMCR 0x00620000
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_TBSCR 0x00C3
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_PISCR 0x0082
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_PLPRCR 0x0090D000
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- */
-#define SCCR_MASK SCCR_EBDF11
-#define CONFIG_SYS_SCCR 0x02000000
-
-
-/*-----------------------------------------------------------------------
- * Debug Enable Register
- * 0x73E67C0F - All interrupts handled by BDM
- * 0x00824001 - Only interrupts needed by MWDebug.exe handled by BDM
- *-----------------------------------------------------------------------
-#define CONFIG_SYS_DER 0x73E67C0F
-*/
-#define CONFIG_SYS_DER 0x0082400F
-
-
-/*-----------------------------------------------------------------------
- * Memory Controller Initialization Constants
- *-----------------------------------------------------------------------
- */
-
-/*
- * BR0 and OR0 (AMD 512K Socketed FLASH)
- * Base address = 0xFFF0_0000 - 0xFFF7_FFFF (After relocation)
- */
-#define CONFIG_SYS_PRELIM_OR_AM
-#define CONFIG_SYS_OR_TIMING_FLASH
-
-#define FLASH_BASE0_PRELIM 0xFFF00001
-#define CONFIG_SYS_OR0_PRELIM 0xFFF80D42
-#define CONFIG_SYS_BR0_PRELIM 0xFFF00401
-
-
-/*
- * BR1 and OR1 (Intel 8M StrataFLASH)
- * Base address = 0xD000_0000 - 0xD07F_FFFF
- */
-
-#define FLASH_BASE1_PRELIM 0xD0000000
-#define CONFIG_SYS_OR1_PRELIM 0xFF800D42
-#define CONFIG_SYS_BR1_PRELIM 0xD0000801
-/* #define CONFIG_SYS_OR1 0xFF800D42 */
-/* #define CONFIG_SYS_BR1 0xD0000801 */
-
-
-/*
- * BR2 and OR2 (SDRAM)
- * Base Address = 0x00000000 - 0x00FF_FFFF (16M After relocation)
- * Base Address = 0x00000000 - 0x03FF_FFFF (64M After relocation)
- * Base Address = 0x00000000 - 0x07FF_FFFF (128M After relocation)
- *
- */
-#define SDRAM_BASE 0x00000000 /* SDRAM bank */
-#define SDRAM_PRELIM_OR_AM 0xF8000000 /* map max. 128 MB */
-
-/* SDRAM timing */
-#define SDRAM_TIMING 0x00000A00
-
-/* For boards with 16M of SDRAM */
-#define SDRAM_16M_MAX_SIZE 0x01000000 /* max 16MB SDRAM */
-#define CONFIG_SYS_16M_MBMR 0x18802114 /* Mem Periodic Timer Prescaler */
-
-/* For boards with 64M of SDRAM */
-#define SDRAM_64M_MAX_SIZE 0x04000000 /* max 64MB SDRAM */
-/* TODO - determine real value */
-#define CONFIG_SYS_64M_MBMR 0x18802114 /* Mem Period Timer Prescaler */
-
-#define CONFIG_SYS_OR2 (SDRAM_PRELIM_OR_AM | SDRAM_TIMING)
-#define CONFIG_SYS_BR2 (SDRAM_BASE | 0x000000C1)
-
-
-/*
- * BR3 and OR3 (NVRAM, Sipex, NAND Flash)
- * Base address = 0xD100_0000 - 0xD100_FFFF (64K NVRAM)
- * Base address = 0xD108_0000 - 0xD108_0000 (Sipex chip ctl register)
- * Base address = 0xD110_0000 - 0xD110_0000 (NAND ctl register)
- * Base address = 0xD138_0000 - 0xD138_0000 (LED ctl register)
- *
- */
-
-#define CONFIG_SYS_OR3_PRELIM 0xFFC00DF6
-#define CONFIG_SYS_BR3_PRELIM 0xD1000401
-/* #define CONFIG_SYS_OR3 0xFFC00DF6 */
-/* #define CONFIG_SYS_BR3 0xD1000401 */
-
-
-/*
- * BR4 and OR4 (Unused)
- * Base address = 0xE000_0000 - 0xE3FF_FFFF
- *
- */
-
-#define CONFIG_SYS_OR4_PRELIM 0xFF000000
-#define CONFIG_SYS_BR4_PRELIM 0xE0000000
-/* #define CONFIG_SYS_OR4 0xFF000000 */
-/* #define CONFIG_SYS_BR4 0xE0000000 */
-
-
-/*
- * BR5 and OR5 (Expansion bus)
- * Base address = 0xE400_0000 - 0xE7FF_FFFF
- *
- */
-
-#define CONFIG_SYS_OR5_PRELIM 0xFF000000
-#define CONFIG_SYS_BR5_PRELIM 0xE4000000
-/* #define CONFIG_SYS_OR5 0xFF000000 */
-/* #define CONFIG_SYS_BR5 0xE4000000 */
-
-
-/*
- * BR6 and OR6 (Expansion bus)
- * Base address = 0xE800_0000 - 0xEBFF_FFFF
- *
- */
-
-#define CONFIG_SYS_OR6_PRELIM 0xFF000000
-#define CONFIG_SYS_BR6_PRELIM 0xE8000000
-/* #define CONFIG_SYS_OR6 0xFF000000 */
-/* #define CONFIG_SYS_BR6 0xE8000000 */
-
-
-/*
- * BR7 and OR7 (Expansion bus)
- * Base address = 0xEC00_0000 - 0xEFFF_FFFF
- *
- */
-
-#define CONFIG_SYS_OR7_PRELIM 0xFF000000
-#define CONFIG_SYS_BR7_PRELIM 0xE8000000
-/* #define CONFIG_SYS_OR7 0xFF000000 */
-/* #define CONFIG_SYS_BR7 0xE8000000 */
-
-/*
- * Sanity checks
- */
-#if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET)
-#error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured
-#endif
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h
deleted file mode 100644
index e7e061c..0000000
--- a/include/configs/RBC823.h
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Modified by Udi Finkelstein udif@udif.com
- * For the RBC823 board.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC823 1 /* This is a MPC823 CPU */
-#define CONFIG_RBC823 1 /* ...on a RBC823 module */
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-
-#if 0
-#define DEBUG 1
-#define CONFIG_LAST_STAGE_INIT
-#endif
-#define CONFIG_KEYBOARD 1 /* This board has a custom keybpard */
-#define CONFIG_LCD 1 /* use LCD controller ... */
-#define CONFIG_MPC8XX_LCD
-#define CONFIG_HITACHI_SP19X001_Z1A /* The LCD type we use */
-
-#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */
-#undef CONFIG_8xx_CONS_SMC1
-#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
-#if 1
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-#define CONFIG_8xx_GCLK_FREQ 48000000L
-
-#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
- "bootm"
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-#define CONFIG_STATUS_LED 1 /* Status LED enabled */
-
-#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-#undef CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
-#undef CONFIG_RTC_MPC8xx /* don't use internal RTC of MPC8xx (no battery) */
-
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 40000
-#define CONFIG_SYS_I2C_SLAVE 0xfe
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_EEPROM_WRITE_BITS 4
-#define CONFIG_SYS_EEPROM_WRITE_DELAY_MS 10
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BEDBUG
-#define CONFIG_CMD_BMP
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_CDP
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_KGDB
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_PORTIO
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SDRAM
-
-#undef CONFIG_CMD_SETGETDCR
-#undef CONFIG_CMD_XIMG
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x0100000 /* default load address */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFF000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0xFFF00000
-#if defined(DEBUG)
-#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 256 kB for Monitor */
-#else
-#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 192 kB for Monitor */
-#endif
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET 0x10000 /* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-/*
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-*/
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWRI | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC00 | SIUMCR_FRC)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- */
-
-/*
- * for 48 MHz, we use a 4 MHz clock * 12
- */
-#define CONFIG_SYS_PLPRCR \
- ( (12-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_LOLRE )
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK SCCR_EBDF11
-#define CONFIG_SYS_SCCR (SCCR_RTDIV | SCCR_RTSEL | SCCR_CRQEN | \
- SCCR_PRQEN | SCCR_EBDF00 | \
- SCCR_COM01 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD001 | \
- SCCR_DFALCD00)
-
-#ifdef NOT_USED
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
- *-----------------------------------------------------------------------
- */
-
-#define CONFIG_IDE_PCCARD 1 /* Use IDE with PC Card Adapter */
-
-#undef CONFIG_IDE_PCMCIA /* Direct IDE not supported */
-#undef CONFIG_IDE_LED /* LED for ide not supported */
-#undef CONFIG_IDE_RESET /* reset for ide not supported */
-
-#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR
-
-/* Offset for data I/O */
-#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for alternate registers */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100
-
-#endif
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-/*#define CONFIG_SYS_DER 0x2002000F*/
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0xFFF00000 /* FLASH bank #0 */
-#define FLASH_BASE1_PRELIM 0x04000000 /* D.O.C Millenium */
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_PRELIM_OR_AM 0xFFF80000 /* OR addr mask */
-
-/* FLASH timing: ACS = 00, TRLX = 0, CSNT = 1, SCY = 7, EHTR = 1 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_BI | OR_SCY_7_CLK | OR_EHTR)
-
-#define CONFIG_SYS_OR_TIMING_MSYS (OR_ACS_DIV1 | OR_BI)
-
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V)
-
-#define CONFIG_SYS_OR1_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_MSYS)
-#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMB | \
- BR_PS_8 | BR_V)
-
-/*
- * BR4 and OR4 (SDRAM)
- *
- */
-#define SDRAM_BASE4_PRELIM 0x00000000 /* SDRAM bank #0 */
-#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
-
-/*
- * SDRAM timing:
- */
-#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM)
-
-#define CONFIG_SYS_OR4_PRELIM (~(SDRAM_MAX_SIZE-1) | CONFIG_SYS_OR_TIMING_SDRAM )
-#define CONFIG_SYS_BR4_PRELIM ((SDRAM_BASE4_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* periodic timer for refresh */
-#define CONFIG_SYS_MAMR_PTA 187 /* start with divider for 48 MHz */
-
-/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
-#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
-#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT ""
-#define MTDPARTS_DEFAULT ""
-*/
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h
deleted file mode 100644
index 50c82c6..0000000
--- a/include/configs/RPXlite_DW.h
+++ /dev/null
@@ -1,462 +0,0 @@
-/*
- * (C) Copyright 2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-/* Yoo. Jonghoon, IPone, yooth@ipone.co.kr
- * U-BOOT port on RPXlite board
- */
-
-/*
- * Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn
- * U-BOOT port on RPXlite DW version board--RPXlite_DW
- * June 8 ,2004
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-/* #define DEBUG 1 */
-/* #define DEPLOYMENT 1 */
-
-#undef CONFIG_MPC860
-#define CONFIG_MPC823 1 /* This is a MPC823e CPU. */
-#define CONFIG_RPXLITE 1 /* RPXlite DW version board */
-
-#define CONFIG_SYS_TEXT_BASE 0xff000000
-
-#ifdef CONFIG_LCD /* with LCD controller ? */
-#define CONFIG_MPC8XX_LCD
-#define CONFIG_SPLASH_SCREEN /* ... with splashscreen support*/
-#endif
-
-#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 9600 /* console default baudrate = 9600bps */
-
-#ifdef DEBUG
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 6 /* autoboot after 6 seconds */
-
-#ifdef DEPLOYMENT
-#define CONFIG_BOOT_RETRY_TIME -1
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT \
- "autoboot in %d seconds (stop with 'st')...\n", bootdelay
-#define CONFIG_AUTOBOOT_STOP_STR "st"
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-#define CONFIG_RESET_TO_RETRY 1
-#define CONFIG_BOOT_RETRY_MIN 1
-#endif /* DEPLOYMENT */
-#endif /* DEBUG */
-
-/* pre-boot commands */
-#define CONFIG_PREBOOT "setenv stdout serial;setenv stdin serial"
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "nfsargs=setenv bootargs console=tty0 console=ttyS0,9600 " \
- "root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs console=tty0 root=/dev/ram rw\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "flash_nfs=run nfsargs addip;" \
- "bootm ${kernel_addr}\0" \
- "flash_self=run ramargs addip;" \
- "bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
- "gatewayip=172.16.115.254\0" \
- "netmask=255.255.255.0\0" \
- "kernel_addr=ff040000\0" \
- "ramdisk_addr=ff200000\0" \
- "ku=era ${kernel_addr} ff1fffff;cp.b 100000 ${kernel_addr} " \
- "${filesize};md ${kernel_addr};" \
- "echo kernel updating finished\0" \
- "uu=protect off 1:0-4;era 1:0-4;cp.b 100000 ff000000 " \
- "${filesize};md ff000000;" \
- "echo u-boot updating finished\0" \
- "eu=protect off 1:6;era 1:6;reset\0" \
- "lcd=setenv stdout lcd;setenv stdin lcd\0" \
- "ser=setenv stdout serial;setenv stdin serial\0" \
- "verify=no"
-
-#define CONFIG_BOOTCOMMAND "run flash_self"
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-#undef CONFIG_STATUS_LED /* disturbs display. Status LED disabled. */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-#if 1 /* Enable this stuff could make image enlarge about 25KB. Mask it if you
- don't want the advanced function */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_DHCP
-
-#ifdef CONFIG_SPLASH_SCREEN
-#define CONFIG_CMD_BMP
-#endif
-
-
-/* test-only */
-#define CONFIG_SYS_JFFS2_FIRST_BANK 0 /* use for JFFS2 */
-#define CONFIG_SYS_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */
-
-#define CONFIG_NETCONSOLE
-
-#endif /* 1 */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "u-boot>" /* Monitor Command Prompt */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0040000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00C0000 /* 4 ... 12 MB in DRAM */
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFA200000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0xFF000000
-
-#if defined(DEBUG) || defined(CONFIG_CMD_IDE)
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#else
-#define CONFIG_SYS_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */
-#endif
-
-#define CONFIG_SYS_MONITOR_BASE 0xFF000000
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#ifdef CONFIG_ENV_IS_IN_NVRAM
-#define CONFIG_ENV_ADDR 0xFA000100
-#define CONFIG_ENV_SIZE 0x1000
-#else
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_OFFSET 0x30000 /* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE 0x8000 /* Total Size of Environment Sector */
-#endif /* CONFIG_ENV_IS_IN_NVRAM */
-
-#define CONFIG_SYS_RESET_ADDRESS ((ulong)((((immap_t *)CONFIG_SYS_IMMR)->im_clkrst.res)))
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 32-bit 12-35
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif /* We can get SYPCR: 0xFFFF0689. */
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 32-bit 12-30
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR (SIUMCR_MLRC10) /* SIUMCR:0x00000800 */
-
-/*---------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 16-bit 12-16
- *---------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE)
-/* TBSCR: 0x00C3 [SAM] */
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 16-bit 12-18
- *-----------------------------------------------------------------------
- * [RTC enabled but not stopped on FRZ]
- */
-#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTE) /* RTCSC:0x00C1 */
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 16-bit 12-23
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- * [Periodic timer enabled,Periodic timer interrupt disable. ]
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF | PISCR_PTE) /* PISCR:0x0083 */
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 32-bit 5-7
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- */
-/* up to 64 MHz we use a 1:2 clock */
-#if defined(RPXlite_64MHz)
-#define CONFIG_SYS_PLPRCR ( (7 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS ) /*PLPRCR: 0x00700000. */
-#else
-#define CONFIG_SYS_PLPRCR ( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS )
-#endif
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 5-3
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK SCCR_EBDF00
-/* Up to 48MHz system clock, we use 1:1 SYSTEM/BUS ratio */
-#if defined(RPXlite_64MHz)
-#define CONFIG_SYS_SCCR ( SCCR_TBS | SCCR_EBDF01 ) /* %%%SCCR:0x02020000 */
-#else
-#define CONFIG_SYS_SCCR ( SCCR_TBS | SCCR_EBDF00 ) /* %%%SCCR:0x02000000 */
-#endif
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
- *-----------------------------------------------------------------------
- */
-#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
-#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
-
-#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
-#undef CONFIG_IDE_LED /* LED for ide not supported */
-#undef CONFIG_IDE_RESET /* reset for ide not supported */
-
-#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
-#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR
-
-/* Offset for data I/O */
-#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for alternate registers */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100
-
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0 and OR0 (FLASH)
- */
-#define FLASH_BASE_PRELIM 0xFC000000 /* FLASH base */
-#define CONFIG_SYS_PRELIM_OR_AM 0xFC000000 /* OR addr mask */
-
-/* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 8, ETHR = 0, BIH = 1 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_8_CLK | OR_BI)
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V)
-
-/*
- * BR1 and OR1 (SDRAM)
- *
- */
-#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM base */
-#define SDRAM_MAX_SIZE 0x08000000 /* max 128 MB in system */
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
-#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000E00
-#define CONFIG_SYS_OR_AM_SDRAM (-(SDRAM_MAX_SIZE & OR_AM_MSK))
-#define CONFIG_SYS_OR1_PRELIM ( CONFIG_SYS_OR_AM_SDRAM | CONFIG_SYS_OR_TIMING_SDRAM )
-#define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-/* RPXlite mem setting */
-#define CONFIG_SYS_BR3_PRELIM 0xFA400001 /* BCSR */
-#define CONFIG_SYS_OR3_PRELIM 0xFF7F8900
-#define CONFIG_SYS_BR4_PRELIM 0xFA000401 /* NVRAM&SRAM */
-#define CONFIG_SYS_OR4_PRELIM 0xFFFE0040
-
-/*
- * Memory Periodic Timer Prescaler
- */
-/* periodic timer for refresh */
-#if defined(RPXlite_64MHz)
-#define CONFIG_SYS_MAMR_PTA 32
-#else
-#define CONFIG_SYS_MAMR_PTA 20
-#endif
-
-/*
- * Refresh clock Prescalar
- */
-#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV2
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10)
-/* CONFIG_SYS_MAMR_9COL:0x20904000 @ 64MHz */
-
-/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
-/* Configuration variable added by yooth. */
-/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */
-/*
- * BCSRx
- *
- * Board Status and Control Registers
- *
- */
-#define BCSR0 0xFA400000
-#define BCSR1 0xFA400001
-#define BCSR2 0xFA400002
-#define BCSR3 0xFA400003
-
-#define BCSR0_ENMONXCVR 0x01 /* Monitor XVCR Control */
-#define BCSR0_ENNVRAM 0x02 /* CS4# Control */
-#define BCSR0_LED5 0x04 /* LED5 control 0='on' 1='off' */
-#define BCSR0_LED4 0x08 /* LED4 control 0='on' 1='off' */
-#define BCSR0_FULLDPLX 0x10 /* Ethernet XCVR Control */
-#define BCSR0_COLTEST 0x20
-#define BCSR0_ETHLPBK 0x40
-#define BCSR0_ETHEN 0x80
-
-#define BCSR1_PCVCTL7 0x01 /* PC Slot B Control */
-#define BCSR1_PCVCTL6 0x02
-#define BCSR1_PCVCTL5 0x04
-#define BCSR1_PCVCTL4 0x08
-#define BCSR1_IPB5SEL 0x10
-
-#define BCSR1_SMC1CTS 0x40 /* Added by SAM. */
-#define BCSR1_SMC1TRS 0x80 /* Added by SAM. */
-
-#define BCSR2_ENRTCIRQ 0x01 /* Added by SAM. */
-#define BCSR2_ENBRG1 0x04 /* Added by SAM. */
-
-#define BCSR2_ENPA5HDR 0x08 /* USB Control */
-#define BCSR2_ENUSBCLK 0x10
-#define BCSR2_USBPWREN 0x20
-#define BCSR2_USBSPD 0x40
-#define BCSR2_USBSUSP 0x80
-
-#define BCSR3_BWKAPWR 0x01 /* Changed by SAM. Backup battery situation */
-#define BCSR3_IRQRTC 0x02 /* Changed by SAM. NVRAM Battery */
-#define BCSR3_RDY_BSY 0x04 /* Changed by SAM. Flash Operation */
-#define BCSR3_MPLX_LIN 0x08 /* Changed by SAM. Linear or Multiplexed address Mode */
-
-#define BCSR3_D27 0x10 /* Dip Switch settings */
-#define BCSR3_D26 0x20
-#define BCSR3_D25 0x40
-#define BCSR3_D24 0x80
-
-/*
- * Environment setting
- */
-#define CONFIG_ETHADDR 00:10:EC:00:37:5B
-#define CONFIG_IPADDR 172.16.115.7
-#define CONFIG_SERVERIP 172.16.115.6
-#define CONFIG_ROOTPATH "/workspace/myfilesystem/target/"
-#define CONFIG_BOOTFILE "uImage.rpxusb"
-#define CONFIG_HOSTNAME LITE_H1_DW
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h
deleted file mode 100644
index a1e2ae9..0000000
--- a/include/configs/Rattler.h
+++ /dev/null
@@ -1,279 +0,0 @@
-/*
- * Copyright (C) 2004 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- *
- * U-Boot configuration for Analogue&Micro Rattler boards.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#ifdef CONFIG_MPC8248
-#define CPU_ID_STR "MPC8248"
-#else
-#define CPU_ID_STR "MPC8250"
-#endif /* CONFIG_MPC8248 */
-
-#define CONFIG_SYS_TEXT_BASE 0xFE000000
-
-#define CONFIG_CPM2 1 /* Has a CPM2 */
-
-#define CONFIG_RATTLER /* Analogue&Micro Rattler board */
-
-/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * Select serial console configuration
- *
- * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- */
-#define CONFIG_CONS_ON_SMC /* Console is on SMC */
-#undef CONFIG_CONS_ON_SCC /* It's not on SCC */
-#undef CONFIG_CONS_NONE /* It's not on external UART */
-#define CONFIG_CONS_INDEX 1 /* SMC1 is used for console */
-
-/*
- * Select ethernet configuration
- *
- * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected,
- * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for
- * SCC, 1-3 for FCC)
- *
- * If CONFIG_ETHER_NONE is defined, then either the ethernet routines
- * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
- * must be unset.
- */
-#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */
-#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */
-#undef CONFIG_ETHER_NONE /* No external Ethernet */
-
-#ifdef CONFIG_ETHER_ON_FCC
-
-#define CONFIG_ETHER_INDEX 1 /* FCC1 is used for Ethernet */
-
-#if (CONFIG_ETHER_INDEX == 1)
-
-/* - Rx clock is CLK11
- * - Tx clock is CLK10
- * - BDs/buffers on 60x bus
- * - Full duplex
- */
-#define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
-#define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK10)
-#define CONFIG_SYS_CPMFCR_RAMTYPE 0
-#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
-
-#elif (CONFIG_ETHER_INDEX == 2)
-
-/* - Rx clock is CLK15
- * - Tx clock is CLK14
- * - BDs/buffers on 60x bus
- * - Full duplex
- */
-#define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-#define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK15 | CMXFCR_TF2CS_CLK14)
-#define CONFIG_SYS_CPMFCR_RAMTYPE 0
-#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
-
-#endif /* CONFIG_ETHER_INDEX */
-
-#define CONFIG_MII /* MII PHY management */
-#define CONFIG_BITBANGMII /* Bit-banged MDIO interface */
-/*
- * GPIO pins used for bit-banged MII communications
- */
-#define MDIO_PORT 2 /* Port C */
-#define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \
- (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
-#define MDC_DECLARE MDIO_DECLARE
-
-#define MDIO_ACTIVE (iop->pdir |= 0x00400000)
-#define MDIO_TRISTATE (iop->pdir &= ~0x00400000)
-#define MDIO_READ ((iop->pdat & 0x00400000) != 0)
-
-#define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \
- else iop->pdat &= ~0x00400000
-
-#define MDC(bit) if(bit) iop->pdat |= 0x00800000; \
- else iop->pdat &= ~0x00800000
-
-#define MIIDELAY udelay(1)
-
-#endif /* CONFIG_ETHER_ON_FCC */
-
-#ifndef CONFIG_8260_CLKIN
-#define CONFIG_8260_CLKIN 100000000 /* in Hz */
-#endif
-
-#define CONFIG_BAUDRATE 38400
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#define CONFIG_BOOTCOMMAND "bootm FE040000" /* autoboot command */
-#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw mtdparts=phys:1M(ROM)ro,-(root)"
-
-#if defined(CONFIG_CMD_KGDB)
-#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
-#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
-#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
-#define CONFIG_KGDB_INDEX 2 /* which serial channel for kgdb */
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
-#endif
-
-#define CONFIG_BZIP2 /* include support for bzip2 compressed images */
-#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#define CONFIG_SYS_FLASH_BASE 0xFE000000
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */
-
-#define CONFIG_SYS_DIRECT_FLASH_TFTP
-
-#if defined(CONFIG_CMD_JFFS2)
-#define CONFIG_SYS_JFFS2_NUM_BANKS CONFIG_SYS_MAX_FLASH_BANKS
-#define CONFIG_SYS_JFFS2_SORT_FRAGMENTS
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00100000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT "nor0=rattler-0"
-#define MTDPARTS_DEFAULT "mtdparts=rattler-0:-@1m(jffs2)"
-*/
-#endif /* CONFIG_CMD_JFFS2 */
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-
-#define CONFIG_ENV_IS_IN_FLASH
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SECT_SIZE 0x10000
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#endif /* CONFIG_ENV_IS_IN_FLASH */
-
-#define CONFIG_SYS_DEFAULT_IMMR 0xFF010000
-
-#define CONFIG_SYS_IMMR 0xF0000000
-
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_SDRAM_SIZE 32
-#define CONFIG_SYS_SDRAM_BR (CONFIG_SYS_SDRAM_BASE | 0x00000041)
-#define CONFIG_SYS_SDRAM_OR 0xFE002EC0
-
-#define CONFIG_SYS_BCSR 0xFC000000
-
-/* Hard reset configuration word */
-#define CONFIG_SYS_HRCW_MASTER 0x0A06875A /* Not used - provided by FPGA */
-/* No slaves */
-#define CONFIG_SYS_HRCW_SLAVE1 0
-#define CONFIG_SYS_HRCW_SLAVE2 0
-#define CONFIG_SYS_HRCW_SLAVE3 0
-#define CONFIG_SYS_HRCW_SLAVE4 0
-#define CONFIG_SYS_HRCW_SLAVE5 0
-#define CONFIG_SYS_HRCW_SLAVE6 0
-#define CONFIG_SYS_HRCW_SLAVE7 0
-
-#define CONFIG_SYS_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPUs */
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE)
-
-#define CONFIG_SYS_HID2 0
-
-#define CONFIG_SYS_SIUMCR 0x0E04C000
-#define CONFIG_SYS_SYPCR 0xFFFFFFC3
-#define CONFIG_SYS_BCR 0x00000000
-#define CONFIG_SYS_SCCR SCCR_DFBRG01
-
-#define CONFIG_SYS_RMR RMR_CSRE
-#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
-#define CONFIG_SYS_RCCR 0
-
-#define CONFIG_SYS_PSDMR 0x8249A452
-#define CONFIG_SYS_PSRT 0x1F
-#define CONFIG_SYS_MPTPR 0x2000
-
-#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | 0x00001001)
-#define CONFIG_SYS_OR0_PRELIM 0xFF001ED6
-#define CONFIG_SYS_BR7_PRELIM (CONFIG_SYS_BCSR | 0x00000801)
-#define CONFIG_SYS_OR7_PRELIM 0xFFFF87F6
-
-#define CONFIG_SYS_RESET_ADDRESS 0xC0000000
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h
deleted file mode 100644
index 46157cc..0000000
--- a/include/configs/SIMPC8313.h
+++ /dev/null
@@ -1,580 +0,0 @@
-/*
- * Copyright (C) Sheldon Instruments, Inc. 2008
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-/*
- * simpc8313 board configuration file
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_NAND_U_BOOT
-
-#define CONFIG_E300 1
-#define CONFIG_MPC831x 1
-#define CONFIG_MPC8313 1
-
-#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000
-#define CONFIG_SYS_NAND_U_BOOT_START 0x00100100
-#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
-#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
-
-#define CONFIG_SYS_TEXT_BASE 0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */
-#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
-
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
-#else
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-#endif
-
-#define CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_FSL_ELBC 1
-
-#define CONFIG_MISC_INIT_R
-
-/*
- * On-board devices
- *
- * TSEC1 is Marvell PHY 88E1118
- */
-
-#define CONFIG_SYS_33MHZ
-
-#define CONFIG_83XX_CLKIN 33333333 /* in Hz */
-
-#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN
-
-#define CONFIG_SYS_IMMR 0xE0000000
-
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-#define CONFIG_DEFAULT_IMMR CONFIG_SYS_IMMR
-#endif
-
-#define CONFIG_SYS_MEMTEST_START 0x00001000
-#define CONFIG_SYS_MEMTEST_END 0x07f00000
-
-#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */
-#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */
-
-/*
- * Device configurations
- */
-#define CONFIG_TSEC1
-
-/*
- * DDR Setup
- */
- /* DDR is system memory*/
-#define CONFIG_SYS_DDR_BASE 0x00000000
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
-#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
-
-#define CONFIG_VERY_BIG_RAM
-#define CONFIG_MAX_MEM_MAPPED (512 << 20)
-
-#define CONFIG_SYS_DDRCDR (DDRCDR_EN \
- | DDRCDR_PZ_NOMZ \
- | DDRCDR_NZ_NOMZ \
- | DDRCDR_M_ODR)
- /* 0x73000002 TODO ODR & DRN ? */
-
-/*
- * FLASH on the Local Bus
- */
-#define CONFIG_SYS_NO_FLASH
-
-#if !defined(CONFIG_NAND_SPL)
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_INIT_RAM_LOCK 1
-#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/
-
-#define CONFIG_SYS_GBL_DATA_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
-
-/*
- * Local Bus LCRR and LBCR regs
- */
-#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
-#define CONFIG_SYS_LCRR_EADC LCRR_EADC_1
-#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2
-#define CONFIG_SYS_LBC_LBCR (0x00040000 /* TODO */ \
- | (0xFF << LBCR_BMT_SHIFT) \
- | 0xF) /* 0x0004ff0f */
-
- /* LB refresh timer prescal, 266MHz/32 */
-#define CONFIG_SYS_LBC_MRTPR 0x20000000
-
-/* drivers/mtd/nand/nand.c */
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_SYS_NAND_BASE 0xFFF00000
-#else
-#define CONFIG_SYS_NAND_BASE 0xE2800000
-#endif
-#define CONFIG_SYS_FPGA_BASE 0xFF000000
-
-#define CONFIG_CMD_NAND
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_NAND_FSL_ELBC 1
-
-#define CONFIG_SYS_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE \
- | BR_DECC_CHK_GEN /* Use HW ECC */ \
- | BR_PS_8 /* 8 bit Port */ \
- | BR_MS_FCM /* MSEL = FCM */ \
- | BR_V) /* valid */
-
-#ifdef CONFIG_NAND_SP
-#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB \
- | OR_FCM_CSCT \
- | OR_FCM_CST \
- | OR_FCM_CHT \
- | OR_FCM_SCY_1 \
- | OR_FCM_TRLX \
- | OR_FCM_EHTR)
-#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32KB)
-#define CONFIG_SYS_NAND_PAGE_SIZE 512 /* NAND chip page size */
- /* NAND chip block size */
-#define CONFIG_SYS_NAND_BLOCK_SIZE (16 << 10)
-#define NAND_CACHE_PAGES 32
-#elif defined(CONFIG_NAND_LP)
-#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_256KB \
- | OR_FCM_PGS \
- | OR_FCM_CSCT \
- | OR_FCM_CST \
- | OR_FCM_CHT \
- | OR_FCM_SCY_1 \
- | OR_FCM_TRLX \
- | OR_FCM_EHTR)
-#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_256KB)
-#define CONFIG_SYS_NAND_PAGE_SIZE 2048 /* NAND chip page size */
- /* NAND chip block size */
-#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10)
-#define NAND_CACHE_PAGES 64
-#else
-#error Page size of NAND not defined.
-#endif /* CONFIG_NAND_SP */
-
-#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SYS_NAND_BLOCK_SIZE
-
-#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM
-#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM
-
-#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_NAND_BASE
-
-#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR0_PRELIM
-#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR0_PRELIM
-
-#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FPGA_BASE \
- | BR_PS_16 \
- | BR_MS_UPMA \
- | BR_V)
-#define CONFIG_SYS_OR1_PRELIM (OR_AM_2MB \
- | OR_UPM_BCTLD)
-
-#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_FPGA_BASE
-#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_2MB)
-
-/*
- * JFFS2 configuration
- */
-#define CONFIG_JFFS2_NAND
-#define CONFIG_JFFS2_DEV "nand0"
-
-/* mtdparts command line support */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
-#define MTDIDS_DEFAULT "nand0=nand0"
-#define MTDPARTS_DEFAULT "mtdparts=nand0:2M(u-boot),6M(kernel),-(jffs2)"
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT 1
-#define CONFIG_OF_BOARD_SETUP 1
-#define CONFIG_OF_STDOUT_VIA_ALIAS 1
-
-/*
- * Serial Port
- */
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_NS16550_MIN_FUNCTIONS
-#endif
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
-
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED 400000
-#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
-#define CONFIG_SYS_FSL_I2C2_SPEED 400000
-#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
-#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} }
-
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
-#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000
-#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE
-#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCI1_IO_BASE 0x00000000
-#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000
-#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */
-
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
-
-/*
- * TSEC
- */
-#define CONFIG_TSEC_ENET /* TSEC ethernet support */
-
-#define CONFIG_GMII /* MII PHY management */
-
-#ifdef CONFIG_TSEC1
-#define CONFIG_HAS_ETH0
-#define CONFIG_TSEC1_NAME "TSEC0"
-#define CONFIG_SYS_TSEC1_OFFSET 0x24000
-#define TSEC1_PHY_ADDR 0x0
-#define TSEC1_FLAGS TSEC_GIGABIT
-#define TSEC1_PHYIDX 0
-#endif
-
-#ifdef CONFIG_TSEC2
-#define CONFIG_HAS_ETH1
-#define CONFIG_TSEC2_NAME "TSEC1"
-#define CONFIG_SYS_TSEC2_OFFSET 0x25000
-#define TSEC2_PHY_ADDR 4
-#define TSEC2_FLAGS TSEC_GIGABIT
-#define TSEC2_PHYIDX 0
-#endif
-
-
-/* Options are: TSEC[0-1] */
-#define CONFIG_ETHPRIME "TSEC1"
-
-/*
- * Configure on-board RTC
- */
-#define CONFIG_RTC_DS1337
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-
-/*
- * Environment
- */
-#if defined(CONFIG_NAND_U_BOOT)
- #define CONFIG_ENV_IS_IN_NAND 1
- #define CONFIG_ENV_OFFSET (768 * 1024)
- #define CONFIG_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
- #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
- #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
- #define CONFIG_ENV_RANGE (CONFIG_ENV_SECT_SIZE * 4)
- #define CONFIG_ENV_OFFSET_REDUND \
- (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
-#elif !defined(CONFIG_SYS_RAMBOOT)
- #define CONFIG_ENV_IS_IN_FLASH 1
- #define CONFIG_ENV_ADDR \
- (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
- #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */
- #define CONFIG_ENV_SIZE 0x2000
-
-/* Address and size of Redundant Environment Sector */
-#else
- #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
- #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
- #define CONFIG_ENV_SIZE 0x2000
-#endif
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_FLASH
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_JFFS2
-
-#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT)
- #undef CONFIG_CMD_SAVEENV
- #undef CONFIG_CMD_LOADS
-#endif
-
-#define CONFIG_CMDLINE_EDITING 1
-#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
- + sizeof(CONFIG_SYS_PROMPT) \
- + 16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
- /* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 256 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
- /* Initial Memory map for Linux*/
-#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
-
-#define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */
-
-#define CONFIG_SYS_HRCW_LOW (HRCWL_LCL_BUS_TO_SCB_CLK_1X1 \
- | 0x20000000 /* reserved */ \
- | HRCWL_DDR_TO_SCB_CLK_2X1 \
- | HRCWL_CSB_TO_CLKIN_4X1 \
- | HRCWL_CORE_TO_CSB_2_5X1)
-
-#define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 4)
-
-#define CONFIG_SYS_HRCW_HIGH_BASE (HRCWH_PCI_HOST \
- | HRCWH_PCI1_ARBITER_ENABLE \
- | HRCWH_CORE_ENABLE \
- | HRCWH_BOOTSEQ_DISABLE \
- | HRCWH_SW_WATCHDOG_DISABLE \
- | HRCWH_TSEC1M_IN_RGMII \
- | HRCWH_TSEC2M_IN_RGMII \
- | HRCWH_BIG_ENDIAN \
- | HRCWH_LALE_NORMAL)
-
-#ifdef CONFIG_NAND_LP
-#define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE \
- | HRCWH_FROM_0XFFF00100 \
- | HRCWH_ROM_LOC_NAND_LP_8BIT \
- | HRCWH_RL_EXT_NAND)
-#else
-#define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE \
- | HRCWH_FROM_0XFFF00100 \
- | HRCWH_ROM_LOC_NAND_SP_8BIT \
- | HRCWH_RL_EXT_NAND)
-#endif
-
-/* System IO Config */
-#define CONFIG_SYS_SICRH (SICRH_ETSEC2_B \
- | SICRH_ETSEC2_C \
- | SICRH_ETSEC2_D \
- | SICRH_ETSEC2_E \
- | SICRH_ETSEC2_F \
- | SICRH_ETSEC2_G \
- | SICRH_TSOBI1 \
- | SICRH_TSOBI2)
-#define CONFIG_SYS_SICRL (SICRL_LBC \
- | SICRL_USBDR_10 \
- | SICRL_ETSEC2_A)
-
-#define CONFIG_SYS_HID0_INIT 0x000000000
-#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK \
- | HID0_ENABLE_INSTRUCTION_CACHE \
- | HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
-
-#define CONFIG_SYS_HID2 HID2_HBE
-
-#define CONFIG_HIGH_BATS 1 /* High BATs supported */
-
-/* DDR @ 0x00000000 */
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \
- | BATU_BL_256M \
- | BATU_VS \
- | BATU_VP)
-#define CONFIG_SYS_IBAT1L ((CONFIG_SYS_SDRAM_BASE + 0x10000000) \
- | BATL_PP_RW)
-#define CONFIG_SYS_IBAT1U ((CONFIG_SYS_SDRAM_BASE + 0x10000000) \
- | BATU_BL_256M \
- | BATU_VS \
- | BATU_VP)
-
-/* PCI @ 0x80000000 */
-#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW)
-#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MEM_BASE \
- | BATU_BL_256M \
- | BATU_VS \
- | BATU_VP)
-#define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI1_MMIO_BASE \
- | BATL_PP_RW \
- | BATL_CACHEINHIBIT \
- | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI1_MMIO_BASE \
- | BATU_BL_256M \
- | BATU_VS \
- | BATU_VP)
-
-/* PCI2 not supported on 8313 */
-#define CONFIG_SYS_IBAT4L (0)
-#define CONFIG_SYS_IBAT4U (0)
-
-/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 */
-#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \
- | BATL_PP_RW \
- | BATL_CACHEINHIBIT \
- | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \
- | BATU_BL_256M \
- | BATU_VS \
- | BATU_VP)
-
-/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
-#define CONFIG_SYS_IBAT6L (0xF0000000 \
- | BATL_PP_RW \
- | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT6U (0xF0000000 \
- | BATU_BL_256M \
- | BATU_VS \
- | BATU_VP)
-
-#define CONFIG_SYS_IBAT7L (0)
-#define CONFIG_SYS_IBAT7U (0)
-
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L
-#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
-#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
-#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
-#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L
-#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
-#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
-#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
-
-/*
- * Environment Configuration
- */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_NETDEV "eth1"
-
-#define CONFIG_HOSTNAME simpc8313
-#define CONFIG_ROOTPATH "/tftpboot/"
-#define CONFIG_BOOTFILE "/tftpboot/uImage"
- /* U-Boot image on TFTP server */
-#define CONFIG_UBOOTPATH "u-boot-nand.bin"
-#define CONFIG_FDTFILE "simpc8313.dtb"
-
- /* default location for tftp and bootm */
-#define CONFIG_LOADADDR 500000
-#define CONFIG_BOOTDELAY 5 /* 5 second delay */
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_BOOTCOMMAND "nand read $loadaddr kernel 600000;" \
- "bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=" CONFIG_NETDEV "\0" \
- "ethprime=TSEC1\0" \
- "uboot=" CONFIG_UBOOTPATH "\0" \
- "tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \
- " +$filesize; " \
- "erase " __stringify(CONFIG_SYS_TEXT_BASE) \
- " +$filesize; " \
- "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \
- " $filesize; " \
- "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \
- " +$filesize; " \
- "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \
- " $filesize\0" \
- "fdtaddr=ae0000\0" \
- "fdtfile=" CONFIG_FDTFILE "\0" \
- "console=ttyS0\0" \
- "setbootargs=setenv bootargs " \
- "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
- "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:" \
- "$netdev:off " \
- "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
- "load_uboot=tftp 100000 u-boot-nand.bin\0" \
- "burn_uboot=nand erase u-boot 80000; " \
- "nand write 100000 u-boot $filesize\0" \
- "update_uboot=run load_uboot;run burn_uboot\0" \
- "mtdids=nand0=nand0\0" \
- "mtdparts=mtdparts=nand0:2M(u-boot),6M(kernel),-(jffs2)\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
- "bootargs=root=/dev/mtdblock2 rootfstype=jffs2 rw " \
- "console=ttyS0,115200\0" \
- ""
-
-#define CONFIG_NFSBOOTCOMMAND \
- "setenv rootdev /dev/nfs;" \
- "run setbootargs;" \
- "run setipargs;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND \
- "setenv rootdev /dev/ram;" \
- "run setbootargs;" \
- "tftp $ramdiskaddr $ramdiskfile;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index 2215ac8..f2a75ae 100644
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -201,6 +201,12 @@ unsigned long get_board_ddr_clk(void);
CSPR_MSEL_NOR | \
CSPR_V)
#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024)
+
+/*
+ * TDM Definition
+ */
+#define T1040_TDM_QUIRK_CCSR_BASE 0xfe000000
+
/* NOR Flash Timing Params */
#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80
#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index e564cb7..8d6c51b 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -230,6 +230,12 @@
CSPR_MSEL_NOR | \
CSPR_V)
#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024)
+
+/*
+ * TDM Definition
+ */
+#define T1040_TDM_QUIRK_CCSR_BASE 0xfe000000
+
/* NOR Flash Timing Params */
#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80
#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index 8dd2e49..59d142e 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -227,8 +227,9 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_VERY_BIG_RAM
#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
-#define CONFIG_DIMM_SLOTS_PER_CTLR 1
-#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
+#define CONFIG_DIMM_SLOTS_PER_CTLR 2
+#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
+#define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
#define CONFIG_DDR_SPD
#define CONFIG_SYS_FSL_DDR3
#undef CONFIG_FSL_DDR_INTERACTIVE
diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h
deleted file mode 100644
index d76a140..0000000
--- a/include/configs/ZPC1900.h
+++ /dev/null
@@ -1,261 +0,0 @@
-/*
- * Copyright (C) 2003-2005 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- *
- * U-Boot configuration for Zephyr Engineering ZPC.1900 board.
- * This port was developed and tested on Revision C board.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_ZPC1900 1 /* ...on Zephyr ZPC.1900 board */
-
-#define CONFIG_SYS_TEXT_BASE 0xFE000000
-
-#define CPU_ID_STR "MPC8265"
-#define CONFIG_CPM2 1 /* Has a CPM2 */
-
-/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * Select serial console configuration
- *
- * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- */
-#define CONFIG_CONS_ON_SMC /* Console is on SMC */
-#undef CONFIG_CONS_ON_SCC /* It's not on SCC */
-#undef CONFIG_CONS_NONE /* It's not on external UART */
-#define CONFIG_CONS_INDEX 1 /* SMC1 is used for console */
-
-/*
- * Select ethernet configuration
- *
- * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected,
- * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for
- * SCC, 1-3 for FCC)
- *
- * If CONFIG_ETHER_NONE is defined, then either the ethernet routines
- * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
- * must be unset.
- */
-#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */
-#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */
-#undef CONFIG_ETHER_NONE /* No external Ethernet */
-
-#ifdef CONFIG_ETHER_ON_FCC
-
-#define CONFIG_ETHER_INDEX 2 /* FCC2 is used for Ethernet */
-
-#if (CONFIG_ETHER_INDEX == 2)
-/*
- * - Rx clock is CLK13
- * - Tx clock is CLK14
- * - Select bus for bd/buffers (see 28-13)
- * - Full duplex
- */
-# define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-# define CONFIG_SYS_CPMFCR_RAMTYPE 0
-# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
-
-#endif /* CONFIG_ETHER_INDEX */
-
-#define CONFIG_MII /* MII PHY management */
-#define CONFIG_BITBANGMII /* Bit-banged MDIO interface */
-/*
- * GPIO pins used for bit-banged MII communications
- */
-#define MDIO_PORT 2 /* Port C */
-#define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \
- (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
-#define MDC_DECLARE MDIO_DECLARE
-
-#define MDIO_ACTIVE (iop->pdir |= 0x00400000)
-#define MDIO_TRISTATE (iop->pdir &= ~0x00400000)
-#define MDIO_READ ((iop->pdat & 0x00400000) != 0)
-
-#define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \
- else iop->pdat &= ~0x00400000
-
-#define MDC(bit) if(bit) iop->pdat |= 0x00200000; \
- else iop->pdat &= ~0x00200000
-
-#define MIIDELAY udelay(1)
-
-#endif /* CONFIG_ETHER_ON_FCC */
-
-#ifndef CONFIG_8260_CLKIN
-#define CONFIG_8260_CLKIN 66666666 /* in Hz */
-#endif
-
-#define CONFIG_BAUDRATE 38400
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#define CONFIG_BOOTCOMMAND "dhcp;bootm" /* autoboot command */
-#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=:::::eth0:dhcp"
-
-#if defined(CONFIG_CMD_KGDB)
-#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
-#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
-#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
-#define CONFIG_KGDB_INDEX 2 /* which serial channel for kgdb */
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
-#endif
-
-#define CONFIG_BZIP2 /* include support for bzip2 compressed images */
-#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x03800000 /* 1 ... 56 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_SDRAM_SIZE 64
-
-#define CONFIG_SYS_IMMR 0xF0000000
-#define CONFIG_SYS_LSDRAM_BASE 0xFC000000
-#define CONFIG_SYS_FLASH_BASE 0xFE000000
-#define CONFIG_SYS_BCSR 0xFEA00000
-#define CONFIG_SYS_EEPROM 0xFEB00000
-#define CONFIG_SYS_FLSIMM_BASE 0xFF000000
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 32 /* max num of sects on one chip */
-
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLSIMM_BASE }
-
-#define BCSR_PCI_MODE 0x01
-
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/* Hard reset configuration word */
-#define CONFIG_SYS_HRCW_MASTER (HRCW_EBM | HRCW_BPS01| HRCW_CIP |\
- HRCW_L2CPC10 | HRCW_DPPC00 | HRCW_ISB100 |\
- HRCW_BMS | HRCW_LBPC00 | HRCW_APPC10 |\
- HRCW_MODCK_H0111 \
- ) /* 0x16848207 */
-/* No slaves */
-#define CONFIG_SYS_HRCW_SLAVE1 0
-#define CONFIG_SYS_HRCW_SLAVE2 0
-#define CONFIG_SYS_HRCW_SLAVE3 0
-#define CONFIG_SYS_HRCW_SLAVE4 0
-#define CONFIG_SYS_HRCW_SLAVE5 0
-#define CONFIG_SYS_HRCW_SLAVE6 0
-#define CONFIG_SYS_HRCW_SLAVE7 0
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-#if !defined(CONFIG_ENV_IS_IN_FLASH) && !defined(CONFIG_ENV_IS_IN_NVRAM)
-#define CONFIG_ENV_IS_IN_NVRAM 1
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-# define CONFIG_ENV_SECT_SIZE 0x10000
-# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#else
-# define CONFIG_ENV_ADDR (CONFIG_SYS_EEPROM + 0x400)
-# define CONFIG_ENV_SIZE 0x1000
-# define CONFIG_SYS_NVRAM_ACCESS_ROUTINE
-#endif
-
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-#define CONFIG_SYS_HID0_INIT (HID0_ICFI)
-#define CONFIG_SYS_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE)
-
-#define CONFIG_SYS_HID2 0
-
-#define CONFIG_SYS_SIUMCR 0x42200000
-#define CONFIG_SYS_SYPCR 0xFFFFFFC3
-#define CONFIG_SYS_BCR 0x90000000
-#define CONFIG_SYS_SCCR SCCR_DFBRG01
-
-#define CONFIG_SYS_RMR RMR_CSRE
-#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
-#define CONFIG_SYS_RCCR 0
-
-#define CONFIG_SYS_PSDMR /* 0x834DA43B */0x014DA43A
-#define CONFIG_SYS_PSRT 0x0F/* 0x0C */
-#define CONFIG_SYS_LSDMR 0x0085A562
-#define CONFIG_SYS_LSRT 0x0F
-#define CONFIG_SYS_MPTPR 0x4000
-
-#define CONFIG_SYS_PSDRAM_BR (CONFIG_SYS_SDRAM_BASE | 0x00000041)
-#define CONFIG_SYS_PSDRAM_OR 0xFC0028C0
-#define CONFIG_SYS_LSDRAM_BR (CONFIG_SYS_LSDRAM_BASE | 0x00001861)
-#define CONFIG_SYS_LSDRAM_OR 0xFF803480
-
-#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | 0x00000801)
-#define CONFIG_SYS_OR0_PRELIM 0xFFE00856
-#define CONFIG_SYS_BR5_PRELIM (CONFIG_SYS_EEPROM | 0x00000801)
-#define CONFIG_SYS_OR5_PRELIM 0xFFFF03F6
-#define CONFIG_SYS_BR6_PRELIM (CONFIG_SYS_FLSIMM_BASE | 0x00001801)
-#define CONFIG_SYS_OR6_PRELIM 0xFF000856
-#define CONFIG_SYS_BR7_PRELIM (CONFIG_SYS_BCSR | 0x00000801)
-#define CONFIG_SYS_OR7_PRELIM 0xFFFF83F6
-
-#define CONFIG_SYS_RESET_ADDRESS 0xC0000000
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 762f6d2..a48b386 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -18,6 +18,21 @@
#include <configs/ti_am335x_common.h>
+#ifndef CONFIG_SPL_BUILD
+# define CONFIG_FIT
+# define CONFIG_TIMESTAMP
+# define CONFIG_LZO
+# ifdef CONFIG_ENABLE_VBOOT
+# define CONFIG_OF_CONTROL
+# define CONFIG_OF_SEPARATE
+# define CONFIG_DEFAULT_DEVICE_TREE am335x-boneblack
+# define CONFIG_FIT_SIGNATURE
+# define CONFIG_RSA
+# endif
+#endif
+
+#define CONFIG_SYS_BOOTM_LEN (16 << 20)
+
#define MACH_TYPE_TIAM335EVM 3589 /* Until the next sync */
#define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM
#define CONFIG_BOARD_LATE_INIT
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 4407b45..ad4cbd8 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -329,6 +329,7 @@
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
/* NAND boot config */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT 64
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index d5e6c4b..974ce98 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -32,11 +32,15 @@
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_I2C_MULTI_EEPROMS
+/* Power */
+#define CONFIG_POWER_TPS65218
+
/* SPL defines. */
#define CONFIG_SPL_TEXT_BASE 0x40300350
#define CONFIG_SPL_MAX_SIZE (220 << 10) /* 220KB */
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
(128 << 20))
+#define CONFIG_SPL_POWER_SUPPORT
#define CONFIG_SPL_YMODEM_SUPPORT
/* Enabling L2 Cache */
@@ -48,15 +52,24 @@
* Since SPL did pll and ddr initialization for us,
* we don't need to do it twice.
*/
-#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT)
+#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_QSPI_BOOT)
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif
+/*
+ * When building U-Boot such that there is no previous loader
+ * we need to call board_early_init_f. This is taken care of in
+ * s_init when we have SPL used.
+ */
+#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL)
+#define CONFIG_BOARD_EARLY_INIT_F
+#endif
+
/* Now bring in the rest of the common code. */
#include <configs/ti_armv7_common.h>
-/* Always 128 KiB env size */
-#define CONFIG_ENV_SIZE (128 << 10)
+/* Always 64 KiB env size */
+#define CONFIG_ENV_SIZE (64 << 10)
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
@@ -86,6 +99,30 @@
#define CONFIG_OMAP_USB_PHY
#define CONFIG_AM437X_USB2PHY2_HOST
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_SYS_TEXT_BASE 0x30000000
+#undef CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
+#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64 KB sectors */
+#define CONFIG_ENV_OFFSET 0x110000
+#define CONFIG_ENV_OFFSET_REDUND 0x120000
+#ifdef MTDIDS_DEFAULT
+#undef MTDIDS_DEFAULT
+#endif
+#ifdef MTDPARTS_DEFAULT
+#undef MTDPARTS_DEFAULT
+#endif
+#define MTDPARTS_DEFAULT "mtdparts=qspi.0:512k(QSPI.u-boot)," \
+ "512k(QSPI.u-boot.backup)," \
+ "512k(QSPI.u-boot-spl-os)," \
+ "64k(QSPI.u-boot-env)," \
+ "64k(QSPI.u-boot-env.backup)," \
+ "8m(QSPI.kernel)," \
+ "-(QSPI.file-system)"
+#endif
+
/* SPI */
#undef CONFIG_OMAP3_SPI
#define CONFIG_TI_QSPI
@@ -94,6 +131,7 @@
#define CONFIG_CMD_SF
#define CONFIG_CMD_SPI
#define CONFIG_TI_SPI_MMAP
+#define CONFIG_SPI_FLASH_BAR
#define CONFIG_QSPI_SEL_GPIO 48
#define CONFIG_SF_DEFAULT_SPEED 48000000
#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3
@@ -145,6 +183,7 @@
"loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
"mmcboot=mmc dev ${mmcdev}; " \
"setenv devnum ${mmcdev}; " \
+ "setenv devtype mmc; " \
"if mmc rescan; then " \
"echo SD/MMC found on device ${devnum};" \
"if run loadbootenv; then " \
@@ -187,6 +226,8 @@
"setenv fdtfile am43x-epos-evm.dtb; fi; " \
"if test $board_name = AM43__GP; then " \
"setenv fdtfile am437x-gp-evm.dtb; fi; " \
+ "if test $board_name = AM43__SK; then " \
+ "setenv fdtfile am437x-sk-evm.dtb; fi; " \
"if test $fdtfile = undefined; then " \
"echo WARNING: Could not determine device tree; fi; \0"
diff --git a/include/configs/arndale.h b/include/configs/arndale.h
index 515facf..370db82 100644
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@@ -224,11 +224,13 @@
/* PMIC */
#define CONFIG_PMIC
-#define CONFIG_PMIC_I2C
-#define CONFIG_PMIC_MAX77686
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_MAX77686
#define CONFIG_DEFAULT_DEVICE_TREE exynos5250-arndale
+#define CONFIG_PREBOOT
+
/* Ethernet Controllor Driver */
#ifdef CONFIG_CMD_NET
#define CONFIG_SMC911X
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index ccfda71..db5d5ea 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -22,7 +22,6 @@
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
#define CONFIG_AT91SAM9M10G45EK
-#define CONFIG_AT91FAMILY
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
@@ -34,6 +33,8 @@
#define CONFIG_CMD_BOOTZ
#define CONFIG_OF_LIBFDT
+#define CONFIG_SYS_GENERIC_BOARD
+
/* general purpose I/O */
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
#define CONFIG_AT91_GPIO
@@ -115,6 +116,20 @@
#endif
+/* MMC */
+#define CONFIG_CMD_MMC
+
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#endif
+
+#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
/* Ethernet */
#define CONFIG_MACB
#define CONFIG_RMII
@@ -126,7 +141,6 @@
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_ATMEL
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
-#define CONFIG_DOS_PARTITION
#define CONFIG_USB_STORAGE
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
@@ -134,6 +148,7 @@
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END 0x23e00000
+#ifdef CONFIG_SYS_USE_NANDFLASH
/* bootstrap + u-boot + env in nandflash */
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_OFFSET 0xc0000
@@ -149,6 +164,28 @@
"256k(env),256k(env_redundant),256k(spare)," \
"512k(dtb),6M(kernel)ro,-(rootfs) " \
"root=/dev/mtdblock7 rw rootfstype=jffs2"
+#elif CONFIG_SYS_USE_MMC
+/* bootstrap + u-boot + env + linux in mmc */
+#define FAT_ENV_INTERFACE "mmc"
+/*
+ * We don't specify the part number, if device 0 has partition table, it means
+ * the first partition; it no partition table, then take whole device as a
+ * FAT file system.
+ */
+#define FAT_ENV_DEVICE_AND_PART "0"
+#define FAT_ENV_FILE "uboot.env"
+#define CONFIG_ENV_IS_IN_FAT
+#define CONFIG_FAT_WRITE
+#define CONFIG_ENV_SIZE 0x4000
+
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "mtdparts=atmel_nand:" \
+ "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
+ "root=/dev/mmcblk0p2 rw rootwait"
+#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x71000000 dtb; " \
+ "fatload mmc 0:1 0x72000000 zImage; " \
+ "bootz 0x72000000 - 0x71000000"
+#endif
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
index e23549d..9b0e588 100644
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -18,9 +18,6 @@
#define CONFIG_SYS_TEXT_BASE 0x26f00000
-#define CONFIG_ARM926EJS
-#define CONFIG_AT91FAMILY
-
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000 /* main clock xtal */
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index f0a6757..b1d4baa 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -18,7 +18,6 @@
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
#define CONFIG_AT91SAM9X5EK
-#define CONFIG_AT91FAMILY
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
@@ -30,6 +29,8 @@
#define CONFIG_CMD_BOOTZ
#define CONFIG_OF_LIBFDT
+#define CONFIG_SYS_GENERIC_BOARD
+
/* general purpose I/O */
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
#define CONFIG_AT91_GPIO
diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h
index 066d09a..7b4f9cf 100644
--- a/include/configs/atngw100mkii.h
+++ b/include/configs/atngw100mkii.h
@@ -151,6 +151,7 @@
#define CONFIG_SYS_MAX_FLASH_SECT 135
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_TEXT_BASE 0x00000000
#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE
#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE
diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h
index e93b855..bf09939 100644
--- a/include/configs/bcm28155_ap.h
+++ b/include/configs/bcm28155_ap.h
@@ -14,6 +14,7 @@
#define CONFIG_ARMV7
#define CONFIG_KONA
#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_GENERIC_BOARD
/*
* Memory configuration
diff --git a/include/configs/beaver.h b/include/configs/beaver.h
index 9ff089e..ae83112 100644
--- a/include/configs/beaver.h
+++ b/include/configs/beaver.h
@@ -76,6 +76,7 @@
/* USB Host support */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_USB_STORAGE
#define CONFIG_CMD_USB
@@ -87,6 +88,7 @@
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
+#include "tegra-common-ums.h"
#include "tegra-common-post.h"
#endif /* __CONFIG_H */
diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
index 7adc8c0..5a37536 100644
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -12,6 +12,8 @@
#ifndef __BUR_AM335X_COMMON_H__
#define __BUR_AM335X_COMMON_H__
/* ------------------------------------------------------------------------- */
+#define CONFIG_SYS_GENERIC_BOARD
+
#define CONFIG_AM33XX
#define CONFIG_OMAP
#define CONFIG_OMAP_COMMON
@@ -94,7 +96,7 @@
#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
#define CONFIG_SYS_I2C_OMAP24XX
-
+#define CONFIG_CMD_I2C
/* GPIO */
#define CONFIG_OMAP_GPIO
#define CONFIG_CMD_GPIO
diff --git a/include/configs/calimain.h b/include/configs/calimain.h
index febee45..b27f973 100644
--- a/include/configs/calimain.h
+++ b/include/configs/calimain.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2011 OMICRON electronics GmbH
+ * Copyright (C) 2011-2014 OMICRON electronics GmbH
*
* Based on da850evm.h. Original Copyrights follow:
*
@@ -18,6 +18,7 @@
#define CONFIG_DRIVER_TI_EMAC
#define MACH_TYPE_CALIMAIN 3528
#define CONFIG_MACH_TYPE MACH_TYPE_CALIMAIN
+#define CONFIG_SYS_GENERIC_BOARD
/*
* SoC Configuration
diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h
index 26b615b..4d1dd28 100644
--- a/include/configs/cm_t335.h
+++ b/include/configs/cm_t335.h
@@ -141,7 +141,6 @@
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000
#define CONFIG_CMD_NAND
-#define GPMC_NAND_ECC_LP_x8_LAYOUT
#define MTDIDS_DEFAULT "nand0=nand"
#define MTDPARTS_DEFAULT "mtdparts=nand:2m(spl)," \
"1m(u-boot),1m(u-boot-env)," \
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index aae05e0..5c484ef 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -104,8 +104,6 @@
#define CONFIG_USB_DEVICE
#define CONFIG_USB_TTY
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-/* This delay is really for slow-to-power-on USB sticks, not the hub */
-#define CONFIG_USB_HUB_MIN_POWER_ON_DELAY 500
/* commands to include */
#include <config_cmd_default.h>
@@ -158,7 +156,6 @@
/* CS0 */
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
/* devices */
-#define GPMC_NAND_ECC_LP_x8_LAYOUT
/* Environment information */
#define CONFIG_BOOTDELAY 3
diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h
index 868813f..ec3145f 100644
--- a/include/configs/controlcenterd.h
+++ b/include/configs/controlcenterd.h
@@ -199,9 +199,10 @@
#define CONFIG_SYS_FSL_I2C2_SPEED 400000
#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
-/* Probing DP501 I2C-Bridge will hang */
-#define CONFIG_SYS_I2C_NOPROBES { {0, 0x30}, {0, 0x37}, {0, 0x3a}, \
- {0, 0x3b}, {0, 0x50} }
+
+#ifndef CONFIG_TRAILBLAZER
+#define CONFIG_CMD_I2C
+#endif
#define CONFIG_PCA9698 /* NXP PCA9698 */
diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 959e188..6171060 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -27,15 +27,12 @@
#define CONFIG_SYS_TEXT_BASE 0x73f00000
-#define CONFIG_AT91_LEGACY
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
-#define CONFIG_AT91FAMILY
-
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h
index 39f7062..1feaefd 100644
--- a/include/configs/cpu9260.h
+++ b/include/configs/cpu9260.h
@@ -32,7 +32,6 @@
#include <asm/arch/hardware.h>
-#define CONFIG_AT91FAMILY
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_BOARD_EARLY_INIT_F
diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h
index 8a3c453..b1b18ad 100644
--- a/include/configs/davinci_dm6467evm.h
+++ b/include/configs/davinci_dm6467evm.h
@@ -78,6 +78,8 @@ extern unsigned int davinci_arm_clk_get(void);
#define CONFIG_SYS_NO_FLASH
#ifdef CONFIG_SYS_USE_NAND
#define CONFIG_NAND_DAVINCI
+#define CONFIG_SYS_NAND_MASK_CLE 0x80000
+#define CONFIG_SYS_NAND_MASK_ALE 0x40000
#define CONFIG_SYS_NAND_CS 2
#undef CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_IS_IN_NAND
diff --git a/include/configs/debris.h b/include/configs/debris.h
deleted file mode 100644
index 4631b86..0000000
--- a/include/configs/debris.h
+++ /dev/null
@@ -1,443 +0,0 @@
-/*
- * (C) Copyright 2001, 2002
- * Sangmoon Kim, Etin Systems, dogoil@etinsys.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-
-/* Environments */
-
-/* bootargs */
-#define CONFIG_BOOTARGS \
- "console=ttyS0,9600 init=/linuxrc " \
- "root=/dev/nfs rw nfsroot=192.168.0.1:" \
- "/tftpboot/target " \
- "ip=192.168.0.2:192.168.0.1:192.168.0.1:" \
- "255.255.255.0:debris:eth0:none " \
- "mtdparts=phys:12m(root),-(kernel)"
-
-/* bootcmd */
-#define CONFIG_BOOTCOMMAND \
- "tftp 800000 pImage; " \
- "setenv bootargs console=ttyS0,9600 init=/linuxrc " \
- "root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:" \
- "${netmask}:${hostname}:eth0:none " \
- "mtdparts=phys:12m(root),-(kernel); " \
- "bootm 800000"
-
-/* bootdelay */
-#define CONFIG_BOOTDELAY 5 /* autoboot 5s */
-
-/* baudrate */
-#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600bps */
-
-/* loads_echo */
-#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
-
-/* ethaddr */
-#undef CONFIG_ETHADDR
-
-/* eth2addr */
-#undef CONFIG_ETH2ADDR
-
-/* eth3addr */
-#undef CONFIG_ETH3ADDR
-
-/* ipaddr */
-#define CONFIG_IPADDR 192.168.0.2
-
-/* serverip */
-#define CONFIG_SERVERIP 192.168.0.1
-
-/* autoload */
-#undef CONFIG_SYS_AUTOLOAD
-
-/* rootpath */
-#define CONFIG_ROOTPATH "/tftpboot/target"
-
-/* gatewayip */
-#define CONFIG_GATEWAYIP 192.168.0.1
-
-/* netmask */
-#define CONFIG_NETMASK 255.255.255.0
-
-/* hostname */
-#define CONFIG_HOSTNAME debris
-
-/* bootfile */
-#define CONFIG_BOOTFILE "pImage"
-
-/* loadaddr */
-#define CONFIG_LOADADDR 800000
-
-/* preboot */
-#undef CONFIG_PREBOOT
-
-/* clocks_in_mhz */
-#undef CONFIG_CLOCKS_IN_MHZ
-
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC8245 1
-#define CONFIG_DEBRIS 1
-
-#if 0
-#define USE_DINK32 1
-#else
-#undef USE_DINK32
-#endif
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 9600
-#define CONFIG_DRAM_SPEED 100 /* MHz */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_KGDB
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SDRAM
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
-#define CONFIG_PCI_PNP
-
-#define CONFIG_EEPRO100
-#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
-#define CONFIG_EEPRO100_SROM_WRITE
-
-#define PCI_ENET0_IOADDR 0x80000000
-#define PCI_ENET0_MEMADDR 0x80000000
-#define PCI_ENET1_IOADDR 0x81000000
-#define PCI_ENET1_MEMADDR 0x81000000
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_MAX_RAM_SIZE 0x20000000
-#define CONFIG_VERY_BIG_RAM
-
-#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
-
-#if defined (USE_DINK32)
-#define CONFIG_SYS_MONITOR_LEN 0x00040000
-#define CONFIG_SYS_MONITOR_BASE 0x00090000
-#define CONFIG_SYS_RAMBOOT 1
-#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#else
-#undef CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_MONITOR_LEN 0x00040000
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
-
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-#endif
-
-#define CONFIG_SYS_FLASH_BASE 0x7C000000
-#define CONFIG_SYS_FLASH_SIZE (16*1024*1024) /* debris has tiny eeprom */
-
-#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */
-
-#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x04000000 /* 0 ... 32 MB in DRAM */
-
-#define CONFIG_SYS_EUMB_ADDR 0xFC000000
-
-#define CONFIG_SYS_FLASH_RANGE_BASE 0xFF000000 /* flash memory address range */
-#define CONFIG_SYS_FLASH_RANGE_SIZE 0x01000000
-#define FLASH_BASE0_PRELIM 0x7C000000 /* debris flash */
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-
-/* mtdparts command line support */
-
-/* Use first bank for JFFS2, second bank contains U-Boot.
- *
- * Note: fake mtd_id's used, no linux mtd map file.
- */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT "nor0=debris-0"
-#define MTDPARTS_DEFAULT "mtdparts=debris-0:-(jffs2)"
-*/
-
-#define CONFIG_ENV_IS_IN_NVRAM 1
-#define CONFIG_ENV_OVERWRITE 1
-#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE 1
-#define CONFIG_ENV_ADDR 0xFF000000 /* right at the start of NVRAM */
-#define CONFIG_ENV_SIZE 0x400 /* Size of the Environment - 8K */
-#define CONFIG_ENV_OFFSET 0 /* starting right at the beginning */
-
-#define CONFIG_SYS_NVRAM_BASE_ADDR 0xff000000
-
-/*
- * CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_VXWORKS_OFFS =
- * NV_RAM_ADDRS + NV_BOOT_OFFSET + NV_ENET_OFFSET
- */
-#define CONFIG_SYS_NVRAM_VXWORKS_OFFS 0x6900
-
-/*
- * select i2c support configuration
- *
- * Supported configurations are {none, software, hardware} drivers.
- * If the software driver is chosen, there are some additional
- * configuration items that the driver uses to drive the port pins.
- */
-#define CONFIG_HARD_I2C 1 /* To enable I2C support */
-#undef CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
-#ifdef CONFIG_SYS_I2C_SOFT
-#error "Soft I2C is not configured properly. Please review!"
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT_SPEED 50000
-#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
-#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
-#define I2C_ACTIVE (iop->pdir |= 0x00010000)
-#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
-#define I2C_READ ((iop->pdat & 0x00010000) != 0)
-#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \
- else iop->pdat &= ~0x00010000
-#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \
- else iop->pdat &= ~0x00020000
-#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SYS_I2C_SOFT */
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 /* EEPROM IS24C02 */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-
-#define CONFIG_SYS_FLASH_BANKS { FLASH_BASE0_PRELIM }
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-
-#define CONFIG_SYS_NS16550_CLK 7372800
-
-#define CONFIG_SYS_NS16550_COM1 0xFF080000
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_NS16550_COM1 + 8)
-#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_NS16550_COM1 + 16)
-#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_NS16550_COM1 + 24)
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
-#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 3
-
-#define CONFIG_SYS_DLL_EXTEND 0x00
-#define CONFIG_SYS_PCI_HOLD_DEL 0x20
-
-#define CONFIG_SYS_ROMNAL 15 /* rom/flash next access time */
-#define CONFIG_SYS_ROMFAL 31 /* rom/flash access time */
-
-#define CONFIG_SYS_REFINT 430 /* # of clocks between CBR refresh cycles */
-
-#define CONFIG_SYS_DBUS_SIZE2 1 /* set for 8-bit RCS1, clear for 32,64 */
-
-/* the following are for SDRAM only*/
-#define CONFIG_SYS_BSTOPRE 121 /* Burst To Precharge, sets open page interval */
-#define CONFIG_SYS_REFREC 8 /* Refresh to activate interval */
-#define CONFIG_SYS_RDLAT 4 /* data latency from read command */
-#define CONFIG_SYS_PRETOACT 3 /* Precharge to activate interval */
-#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval */
-#define CONFIG_SYS_ACTORW 3 /* Activate to R/W */
-#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */
-#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */
-#if 0
-#define CONFIG_SYS_SDMODE_BURSTLEN 2 /* OBSOLETE! SDMODE Burst length 2=4, 3=8 */
-#endif
-
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
-#define CONFIG_SYS_EXTROM 1
-#define CONFIG_SYS_REGDIMM 0
-
-
-/* memory bank settings*/
-/*
- * only bits 20-29 are actually used from these vales to set the
- * start/end address the upper two bits will be 0, and the lower 20
- * bits will be set to 0x00000 for a start address, or 0xfffff for an
- * end address
- */
-#define CONFIG_SYS_BANK0_START 0x00000000
-#define CONFIG_SYS_BANK0_END (0x4000000 - 1)
-#define CONFIG_SYS_BANK0_ENABLE 1
-#define CONFIG_SYS_BANK1_START 0x04000000
-#define CONFIG_SYS_BANK1_END (0x8000000 - 1)
-#define CONFIG_SYS_BANK1_ENABLE 1
-#define CONFIG_SYS_BANK2_START 0x3ff00000
-#define CONFIG_SYS_BANK2_END 0x3fffffff
-#define CONFIG_SYS_BANK2_ENABLE 0
-#define CONFIG_SYS_BANK3_START 0x3ff00000
-#define CONFIG_SYS_BANK3_END 0x3fffffff
-#define CONFIG_SYS_BANK3_ENABLE 0
-#define CONFIG_SYS_BANK4_START 0x00000000
-#define CONFIG_SYS_BANK4_END 0x00000000
-#define CONFIG_SYS_BANK4_ENABLE 0
-#define CONFIG_SYS_BANK5_START 0x00000000
-#define CONFIG_SYS_BANK5_END 0x00000000
-#define CONFIG_SYS_BANK5_ENABLE 0
-#define CONFIG_SYS_BANK6_START 0x00000000
-#define CONFIG_SYS_BANK6_END 0x00000000
-#define CONFIG_SYS_BANK6_ENABLE 0
-#define CONFIG_SYS_BANK7_START 0x00000000
-#define CONFIG_SYS_BANK7_END 0x00000000
-#define CONFIG_SYS_BANK7_ENABLE 0
-/*
- * Memory bank enable bitmask, specifying which of the banks defined above
- are actually present. MSB is for bank #7, LSB is for bank #0.
- */
-#define CONFIG_SYS_BANK_ENABLE 0x01
-
-#define CONFIG_SYS_ODCR 0x75 /* configures line driver impedances, */
- /* see 8240 book for bit definitions */
-#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 retains the */
- /* currently accessed page in memory */
- /* see 8240 book for details */
-
-/* SDRAM 0 - 256MB */
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* stack in DCACHE @ 1GB (no backing mem) */
-#if defined(USE_DINK32)
-#define CONFIG_SYS_IBAT1L (0x40000000 | BATL_PP_00 )
-#define CONFIG_SYS_IBAT1U (0x40000000 | BATU_BL_128K )
-#else
-#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#endif
-
-/* PCI memory */
-#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* Flash, config addrs, etc */
-#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8240 CPU */
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/* values according to the manual */
-
-#define CONFIG_DRAM_50MHZ 1
-#define CONFIG_SDRAM_50MHZ
-
-#define CONFIG_DISK_SPINUP_TIME 1000000
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 16a00eb..5308790 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -314,6 +314,7 @@
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
/* NAND boot config */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT 64
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
diff --git a/include/configs/dig297.h b/include/configs/dig297.h
index af6f56b..ce205e9 100644
--- a/include/configs/dig297.h
+++ b/include/configs/dig297.h
@@ -138,6 +138,7 @@
* Board NAND Info.
*/
#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
/* to access nand */
#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h
index 7877897..6153a40 100644
--- a/include/configs/dlvision-10g.h
+++ b/include/configs/dlvision-10g.h
@@ -17,7 +17,7 @@
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME dlvsion-10g
-#define CONFIG_IDENT_STRING " dlvision-10g 0.05"
+#define CONFIG_IDENT_STRING " dlvision-10g 0.06"
#include "amcc-common.h"
#define CONFIG_BOARD_EARLY_INIT_F
@@ -40,6 +40,7 @@
/* new uImage format support */
#define CONFIG_FIT
#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
+#define CONFIG_FIT_DISABLE_SHA256
#define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */
@@ -64,9 +65,14 @@
/*
* Commands additional to the ones defined in amcc-common.h
*/
-#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DTT
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_DIAG
#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_IRQ
+#undef CONFIG_CMD_NFS
/*
* SDRAM configuration (please see cpu/ppc/sdram.[ch])
@@ -97,9 +103,23 @@
/*
* I2C stuff
*/
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F
+
+#define CONFIG_SYS_I2C_IHS
+#define CONFIG_SYS_I2C_IHS_CH0
+#define CONFIG_SYS_I2C_IHS_SPEED_0 50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_0 0x7F
+#define CONFIG_SYS_I2C_IHS_CH1
+#define CONFIG_SYS_I2C_IHS_SPEED_1 50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_1 0x7F
+
+#define CONFIG_SYS_SPD_BUS_NUM 2
/* Temp sensor/hwmon/dtt */
+#define CONFIG_SYS_DTT_BUS_NUM 2
#define CONFIG_DTT_LM63 1 /* National LM63 */
#define CONFIG_DTT_SENSORS { 0x4c, 0x4e, 0x18 } /* Sensor addresses */
#define CONFIG_DTT_PWM_LOOKUPTABLE \
@@ -107,6 +127,9 @@
{ 54, 27 }, { 56, 31 }, { 58, 36 }, { 60, 40 } }
#define CONFIG_DTT_TACH_LIMIT 0xa10
+#define CONFIG_SYS_ICS8N3QV01_I2C {0, 1}
+#define CONFIG_SYS_SIL1178_I2C {0, 1}
+
/* EBC peripherals */
#define CONFIG_SYS_FLASH_BASE 0xFC000000
@@ -306,9 +329,7 @@
/*
* OSD Setup
*/
-#define CONFIG_SYS_ICS8N3QV01
#define CONFIG_SYS_MPC92469AC
-#define CONFIG_SYS_SIL1178
#define CONFIG_SYS_OSD_SCREENS CONFIG_SYS_FPGA_COUNT
#endif /* __CONFIG_H */
diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h
new file mode 100644
index 0000000..37bdcc0
--- /dev/null
+++ b/include/configs/edb93xx.h
@@ -0,0 +1,292 @@
+/*
+ * U-boot - Configuration file for Cirrus Logic EDB93xx boards
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#ifdef CONFIG_MK_edb9301
+#define CONFIG_EDB9301
+#elif defined(CONFIG_MK_edb9302)
+#define CONFIG_EDB9302
+#elif defined(CONFIG_MK_edb9302a)
+#define CONFIG_EDB9302A
+#elif defined(CONFIG_MK_edb9307)
+#define CONFIG_EDB9307
+#elif defined(CONFIG_MK_edb9307a)
+#define CONFIG_EDB9307A
+#elif defined(CONFIG_MK_edb9312)
+#define CONFIG_EDB9312
+#elif defined(CONFIG_MK_edb9315)
+#define CONFIG_EDB9315
+#elif defined(CONFIG_MK_edb9315a)
+#define CONFIG_EDB9315A
+#else
+#error "no board defined"
+#endif
+
+/* Initial environment and monitor configuration options. */
+#define CONFIG_BOOTDELAY 2
+#define CONFIG_CMDLINE_TAG 1
+#define CONFIG_INITRD_TAG 1
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_BOOTARGS "root=/dev/nfs console=ttyAM0,115200 ip=dhcp"
+#define CONFIG_BOOTFILE "edb93xx.img"
+
+#define CONFIG_SYS_HUSH_PARSER 1
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+
+#define CONFIG_SYS_LDSCRIPT "board/cirrus/edb93xx/u-boot.lds"
+
+
+#ifdef CONFIG_EDB9301
+#define CONFIG_EP9301
+#define CONFIG_MACH_TYPE MACH_TYPE_EDB9301
+#define CONFIG_SYS_PROMPT "EDB9301> "
+#define CONFIG_ENV_SECT_SIZE 0x00020000
+#elif defined(CONFIG_EDB9302)
+#define CONFIG_EP9302
+#define CONFIG_MACH_TYPE MACH_TYPE_EDB9302
+#define CONFIG_SYS_PROMPT "EDB9302> "
+#define CONFIG_ENV_SECT_SIZE 0x00020000
+#elif defined(CONFIG_EDB9302A)
+#define CONFIG_EP9302
+#define CONFIG_MACH_TYPE MACH_TYPE_EDB9302A
+#define CONFIG_SYS_PROMPT "EDB9302A> "
+#define CONFIG_ENV_SECT_SIZE 0x00020000
+#elif defined(CONFIG_EDB9307)
+#define CONFIG_EP9307
+#define CONFIG_MACH_TYPE MACH_TYPE_EDB9307
+#define CONFIG_SYS_PROMPT "EDB9307> "
+#define CONFIG_ENV_SECT_SIZE 0x00040000
+#elif defined(CONFIG_EDB9307A)
+#define CONFIG_EP9307
+#define CONFIG_MACH_TYPE MACH_TYPE_EDB9307A
+#define CONFIG_SYS_PROMPT "EDB9307A> "
+#define CONFIG_ENV_SECT_SIZE 0x00020000
+#elif defined(CONFIG_EDB9312)
+#define CONFIG_EP9312
+#define CONFIG_MACH_TYPE MACH_TYPE_EDB9312
+#define CONFIG_SYS_PROMPT "EDB9312> "
+#define CONFIG_ENV_SECT_SIZE 0x00040000
+#elif defined(CONFIG_EDB9315)
+#define CONFIG_EP9315
+#define CONFIG_MACH_TYPE MACH_TYPE_EDB9315
+#define CONFIG_SYS_PROMPT "EDB9315> "
+#define CONFIG_ENV_SECT_SIZE 0x00040000
+#elif defined(CONFIG_EDB9315A)
+#define CONFIG_EP9315
+#define CONFIG_MACH_TYPE MACH_TYPE_EDB9315A
+#define CONFIG_SYS_PROMPT "EDB9315A> "
+#define CONFIG_ENV_SECT_SIZE 0x00020000
+#else
+#error "no board defined"
+#endif
+
+/* High-level configuration options */
+#define CONFIG_ARM920T 1 /* This is an ARM920T core... */
+#define CONFIG_EP93XX 1 /* in a Cirrus Logic 93xx SoC */
+
+#define CONFIG_SYS_CLK_FREQ 14745600 /* EP93xx has a 14.7456 clock */
+#define CONFIG_SYS_HZ 1000 /* decr freq: 1 ms ticks */
+#undef CONFIG_USE_IRQ /* Don't need IRQ/FIQ */
+
+/* Monitor configuration */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+
+#undef CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_JFFS2
+
+#define CONFIG_SYS_LONGHELP /* Enable "long" help in mon */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
+/* Print buffer size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+/* Boot argument buffer size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_MAXARGS 16 /* Max number of command args */
+
+/* Serial port hardware configuration */
+#define CONFIG_PL010_SERIAL
+#define CONFIG_CONS_INDEX 0
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, \
+ 115200, 230400}
+#define CONFIG_SYS_SERIAL0 0x808C0000
+#define CONFIG_SYS_SERIAL1 0x808D0000
+/*#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \
+ (void *)CONFIG_SYS_SERIAL1} */
+
+#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0}
+
+/* Status LED */
+#define CONFIG_STATUS_LED 1 /* Status LED enabled */
+#define CONFIG_BOARD_SPECIFIC_LED 1
+#define STATUS_LED_GREEN 0
+#define STATUS_LED_RED 1
+/* Green */
+#define STATUS_LED_BIT STATUS_LED_GREEN
+#define STATUS_LED_STATE STATUS_LED_ON
+#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
+/* Red */
+#define STATUS_LED_BIT1 STATUS_LED_RED
+#define STATUS_LED_STATE1 STATUS_LED_OFF
+#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
+/* Optional value */
+#define STATUS_LED_BOOT STATUS_LED_BIT
+
+/* Network hardware configuration */
+#define CONFIG_DRIVER_EP93XX_MAC
+#define CONFIG_MII_SUPPRESS_PREAMBLE
+#define CONFIG_MII
+#define CONFIG_PHY_ADDR 1
+#define CONFIG_NET_MULTI
+#undef CONFIG_NETCONSOLE
+
+/* SDRAM configuration */
+#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) || \
+ defined(CONFIG_EDB9307) || defined CONFIG_EDB9312 || \
+ defined(CONFIG_EDB9315)
+/*
+ * EDB9301/2 has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75
+ * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set
+ * the SROMLL bit on the processor, resulting in this non-contiguous memory map.
+ *
+ * The EDB9307, EDB9312, and EDB9315 have 2 banks of SDRAM consisting of
+ * 2x Samsung K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of
+ * 64 MB of SDRAM.
+ */
+
+#define CONFIG_EDB93XX_SDCS3
+
+#elif defined(CONFIG_EDB9302A) || \
+ defined(CONFIG_EDB9307A) || defined(CONFIG_EDB9315A)
+/*
+ * EDB9302a has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75
+ * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set
+ * the SROMLL bit on the processor, resulting in this non-contiguous memory map.
+ *
+ * The EDB9307A and EDB9315A have 2 banks of SDRAM consisting of 2x Samsung
+ * K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of 64 MB of SDRAM.
+ */
+#define CONFIG_EDB93XX_SDCS0
+
+#else
+#error "no SDCS configuration for this board"
+#endif
+
+
+#if defined(CONFIG_EDB93XX_SDCS3)
+#define CONFIG_SYS_LOAD_ADDR 0x01000000 /* Default load address */
+#define PHYS_SDRAM_1 0x00000000
+#elif defined(CONFIG_EDB93XX_SDCS0)
+#define CONFIG_SYS_LOAD_ADDR 0xc1000000 /* Default load address */
+#define PHYS_SDRAM_1 0xc0000000
+#endif
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_NR_DRAM_BANKS 8
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_SDRAM_BASE + 32*1024 - GENERATED_GBL_DATA_SIZE)
+
+
+/* Must match kernel config */
+#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
+
+/* Run-time memory allocatons */
+#define CONFIG_SYS_GBL_DATA_SIZE 128
+#define CONFIG_STACKSIZE (128 * 1024)
+
+#if defined(CONFIG_USE_IRQ)
+#define CONFIG_STACKSIZE_IRQ (4 * 1024)
+#define CONFIG_STACKSIZE_FIQ (4 * 1024)
+#endif
+
+#define CONFIG_SYS_MALLOC_LEN (512 * 1024)
+
+/* -----------------------------------------------------------------------------
+ * FLASH and environment organization
+ *
+ * The EDB9301, EDB9302(a), EDB9307a, EDB9315a have 1 bank of flash memory at
+ * 0x60000000 consisting of 1x Intel TE28F128J3C-150 128 Mbit flash on a 16-bit
+ * data bus, for a total of 16 MB of CFI-compatible flash.
+ *
+ * The EDB9307, EDB9312, and EDB9315 have 1 bank of flash memory at
+ * 0x60000000 consisting of 2x Micron MT28F128J3-12 128 Mbit flash on a 32-bit
+ * data bus, for a total of 32 MB of CFI-compatible flash.
+ *
+ *
+ * EDB9301/02(a)7a/15a EDB9307/12/15
+ * 0x60000000 - 0x0003FFFF u-boot u-boot
+ * 0x60040000 - 0x0005FFFF environment #1 environment #1
+ * 0x60060000 - 0x0007FFFF environment #2 environment #1 (continued)
+ * 0x60080000 - 0x0009FFFF unused environment #2
+ * 0x600A0000 - 0x000BFFFF unused environment #2 (continued)
+ * 0x600C0000 - 0x00FFFFFF unused unused
+ * 0x61000000 - 0x01FFFFFF not present unused
+ */
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+
+
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT (256+8)
+
+#define CONFIG_SYS_TEXT_BASE 0x60000000
+#define PHYS_FLASH_1 CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
+
+#define CONFIG_ENV_OVERWRITE /* Vendor params unprotected */
+#define CONFIG_ENV_IS_IN_FLASH
+
+#define CONFIG_ENV_ADDR 0x60040000
+#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+
+#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
+
+/* Define to enable MMC on SPI support */
+/* #define CONFIG_EP93XX_SPI_MMC */
+
+#ifdef CONFIG_EP93XX_SPI_MMC
+#define CONFIG_EP93XX_SPI
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC_SPI
+#define CONFIG_CMD_MMC
+#define CONFIG_MMC_SPI_NPOWER_EGPIO 9
+#endif
+
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_USB_OHCI_EP93XX
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "ep93xx-ohci"
+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x80020000
+
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_USB
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_CMD_BOOTZ
+
+/* Define to disable flash configuration*/
+/* #define CONFIG_EP93XX_NO_FLASH_CFG */
+
+/* Define this for indusrial rated chips */
+/* #define CONFIG_EDB93XX_INDUSTRIAL */
+
+#endif /* !defined (__CONFIG_H) */
diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h
deleted file mode 100644
index f1af96d..0000000
--- a/include/configs/ep8248.h
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * Copyright (C) 2004 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- *
- * U-Boot configuration for Embedded Planet EP8248 boards.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_MPC8248
-#define CPU_ID_STR "MPC8248"
-
-#define CONFIG_EP8248 /* Embedded Planet EP8248 board */
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
-
-/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * Select serial console configuration
- *
- * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- */
-#define CONFIG_CONS_ON_SMC /* Console is on SMC */
-#undef CONFIG_CONS_ON_SCC /* It's not on SCC */
-#undef CONFIG_CONS_NONE /* It's not on external UART */
-#define CONFIG_CONS_INDEX 1 /* SMC1 is used for console */
-
-#define CONFIG_SYS_BCSR 0xFA000000
-
-/* Pass open firmware flat device tree */
-#define CONFIG_OF_LIBFDT 1
-#define CONFIG_OF_BOARD_SETUP 1
-
-#define OF_TBCLK (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH "/soc/cpm/serial <at> 11a80"
-
-/* Select ethernet configuration */
-#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */
-#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */
-#undef CONFIG_ETHER_NONE /* No external Ethernet */
-
-#define CONFIG_SYS_CPMFCR_RAMTYPE 0
-#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
-
-#define CONFIG_HAS_ETH0
-#define CONFIG_ETHER_ON_FCC1 1
-/* - Rx clock is CLK10
- * - Tx clock is CLK11
- * - BDs/buffers on 60x bus
- * - Full duplex
- */
-#define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
-#define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK10 | CMXFCR_TF1CS_CLK11)
-
-#define CONFIG_HAS_ETH1
-#define CONFIG_ETHER_ON_FCC2 1
-/* - Rx clock is CLK13
- * - Tx clock is CLK14
- * - BDs/buffers on 60x bus
- * - Full duplex
- */
-#define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-#define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-
-#define CONFIG_MII /* MII PHY management */
-#define CONFIG_BITBANGMII /* Bit-banged MDIO interface */
-/*
- * GPIO pins used for bit-banged MII communications
- */
-#define MDIO_PORT 0 /* Not used - implemented in BCSR */
-
-#define MDIO_ACTIVE (*(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFB)
-#define MDIO_TRISTATE (*(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x04)
-#define MDIO_READ (*(vu_char *)(CONFIG_SYS_BCSR + 8) & 1)
-
-#define MDIO(bit) if(bit) *(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x01; \
- else *(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFE
-
-#define MDC(bit) if(bit) *(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x02; \
- else *(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFD
-
-#define MIIDELAY udelay(1)
-
-#ifndef CONFIG_8260_CLKIN
-#define CONFIG_8260_CLKIN 66000000 /* in Hz */
-#endif
-
-#define CONFIG_BAUDRATE 38400
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#define CONFIG_BOOTCOMMAND "bootm FF860000" /* autoboot command */
-#define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw mtdparts=phys:7M(root),-(root)ro"
-
-#if defined(CONFIG_CMD_KGDB)
-#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
-#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
-#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
-#define CONFIG_KGDB_INDEX 1 /* which serial channel for kgdb */
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
-#endif
-
-#define CONFIG_BZIP2 /* include support for bzip2 compressed images */
-#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#define CONFIG_SYS_FLASH_BASE 0xFF800000
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */
-
-#define CONFIG_SYS_DIRECT_FLASH_TFTP
-
-#if defined(CONFIG_CMD_JFFS2)
-#define CONFIG_SYS_JFFS2_FIRST_BANK 0
-#define CONFIG_SYS_JFFS2_NUM_BANKS CONFIG_SYS_MAX_FLASH_BANKS
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR 0
-#define CONFIG_SYS_JFFS2_LAST_SECTOR 62
-#define CONFIG_SYS_JFFS2_SORT_FRAGMENTS
-#define CONFIG_SYS_JFFS_CUSTOM_PART
-#endif
-
-#if defined(CONFIG_CMD_I2C)
-#define CONFIG_HARD_I2C 1 /* To enable I2C support */
-#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */
-#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */
-#endif
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256KB for Monitor */
-
-#define CONFIG_ENV_IS_IN_FLASH
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SECT_SIZE 0x20000
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#endif /* CONFIG_ENV_IS_IN_FLASH */
-
-#define CONFIG_SYS_DEFAULT_IMMR 0x00010000
-
-#define CONFIG_SYS_IMMR 0xF0000000
-
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/* Hard reset configuration word */
-#define CONFIG_SYS_HRCW_MASTER 0x0C40025A /* Not used - provided by FPGA */
-/* No slaves */
-#define CONFIG_SYS_HRCW_SLAVE1 0
-#define CONFIG_SYS_HRCW_SLAVE2 0
-#define CONFIG_SYS_HRCW_SLAVE3 0
-#define CONFIG_SYS_HRCW_SLAVE4 0
-#define CONFIG_SYS_HRCW_SLAVE5 0
-#define CONFIG_SYS_HRCW_SLAVE6 0
-#define CONFIG_SYS_HRCW_SLAVE7 0
-
-#define CONFIG_SYS_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPUs */
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE)
-
-#define CONFIG_SYS_HID2 0
-
-#define CONFIG_SYS_SIUMCR 0x01240200
-#define CONFIG_SYS_SYPCR 0xFFFF0683
-#define CONFIG_SYS_BCR 0x00000000
-#define CONFIG_SYS_SCCR SCCR_DFBRG01
-
-#define CONFIG_SYS_RMR RMR_CSRE
-#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
-#define CONFIG_SYS_RCCR 0
-
-#define CONFIG_SYS_MPTPR 0x1300
-#define CONFIG_SYS_PSDMR 0x82672522
-#define CONFIG_SYS_PSRT 0x4B
-
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_SDRAM_BR (CONFIG_SYS_SDRAM_BASE | 0x00001841)
-#define CONFIG_SYS_SDRAM_OR 0xFF0030C0
-
-#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | 0x00001801)
-#define CONFIG_SYS_OR0_PRELIM 0xFF8008C2
-#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_BCSR | 0x00000801)
-#define CONFIG_SYS_OR2_PRELIM 0xFFF00864
-
-#define CONFIG_SYS_RESET_ADDRESS 0xC0000000
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index 480d867..4c69af6 100644
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -12,6 +12,8 @@
#include <asm/hardware.h>
+#define CONFIG_SYS_GENERIC_BOARD
+
/* The first stage boot loader expects u-boot running at this address. */
#define CONFIG_SYS_TEXT_BASE 0x27000000 /* 16MB available */
@@ -23,8 +25,6 @@
#define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5
/* CPU information */
-#define CONFIG_ARM926EJS
-#define CONFIG_AT91FAMILY
#define CONFIG_DISPLAY_CPUINFO /* Display at console. */
#define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/exynos4-dt.h b/include/configs/exynos4-dt.h
index cbd2d20..44e6ab4 100644
--- a/include/configs/exynos4-dt.h
+++ b/include/configs/exynos4-dt.h
@@ -20,6 +20,7 @@
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_BOARD_COMMON
+#define CONFIG_SYS_GENERIC_BOARD
/* Enable fdt support */
#define CONFIG_OF_CONTROL
@@ -44,6 +45,9 @@
#define CONFIG_S5P_SDHCI
#define CONFIG_SDHCI
#define CONFIG_MMC_SDMA
+#define CONFIG_DWMMC
+#define CONFIG_EXYNOS_DWMMC
+#define CONFIG_BOUNCE_BUFFER
#define CONFIG_MMC_DEFAULT_DEV 0
/* PWM */
diff --git a/include/configs/exynos5-dt.h b/include/configs/exynos5-dt.h
index 5a9b1b4..e36a031 100644
--- a/include/configs/exynos5-dt.h
+++ b/include/configs/exynos5-dt.h
@@ -144,8 +144,6 @@
/* specific .lds file */
#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds"
-#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024)
-
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP /* undef to save memory */
@@ -163,8 +161,6 @@
#define CONFIG_RD_LVL
-#define CONFIG_NR_DRAM_BANKS 8
-#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE
#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
@@ -207,7 +203,10 @@
#define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE)
#define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE)
-#define CONFIG_ENV_OFFSET (CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE)
+
+/* Store environment at the end of a 4 MB SPI flash */
+#define FLASH_SIZE (0x4 << 20)
+#define CONFIG_ENV_OFFSET (FLASH_SIZE - CONFIG_BL2_SIZE)
/* U-boot copy size from boot Media to DRAM.*/
#define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512)
@@ -259,6 +258,7 @@
/* PMIC */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
+#define CONFIG_POWER_TPS65090
/* Ethernet Controllor Driver */
#ifdef CONFIG_CMD_NET
@@ -290,4 +290,10 @@
#define CONFIG_CMD_GPIO
+/* USB boot mode */
+#define CONFIG_USB_BOOTING
+#define EXYNOS_COPY_USB_FNPTR_ADDR 0x02020070
+#define EXYNOS_USB_SECONDARY_BOOT 0xfeed0002
+#define EXYNOS_IRAM_SECONDARY_BASE 0x02020018
+
#endif /* __CONFIG_H */
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index b7ff472..74e72a5 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -20,6 +20,8 @@
#define MACH_TYPE_SMDK5250 3774
#define CONFIG_MACH_TYPE MACH_TYPE_SMDK5250
+#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024)
+
/* USB */
#define CONFIG_CMD_USB
#define CONFIG_USB_XHCI
@@ -27,12 +29,6 @@
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#define CONFIG_USB_STORAGE
-/* USB boot mode */
-#define CONFIG_USB_BOOTING
-#define EXYNOS_COPY_USB_FNPTR_ADDR 0x02020070
-#define EXYNOS_USB_SECONDARY_BOOT 0xfeed0002
-#define EXYNOS_IRAM_SECONDARY_BASE 0x02020018
-
#define CONFIG_SPL_TEXT_BASE 0x02023400
#define CONFIG_BOOTCOMMAND "mmc read 40007000 451 2000; bootm 40007000"
@@ -45,7 +41,7 @@
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK
/* PMIC */
-#define CONFIG_PMIC_MAX77686
+#define CONFIG_POWER_MAX77686
/* Sound */
#define CONFIG_CMD_SOUND
@@ -69,4 +65,9 @@
#define LCD_YRES 1600
#define LCD_BPP LCD_COLOR16
#endif
+
+/* DRAM Memory Banks */
+#define CONFIG_NR_DRAM_BANKS 8
+#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
+
#endif /* __CONFIG_5250_H */
diff --git a/include/configs/exynos5420.h b/include/configs/exynos5420.h
new file mode 100644
index 0000000..d2a9556
--- /dev/null
+++ b/include/configs/exynos5420.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics
+ *
+ * Configuration settings for the SAMSUNG EXYNOS5420 SoC
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_EXYNOS5420_H
+#define __CONFIG_EXYNOS5420_H
+
+#define CONFIG_EXYNOS5420 /* which is in a Exynos5 Family */
+
+#define MACH_TYPE_SMDK5420 8002
+#define CONFIG_MACH_TYPE MACH_TYPE_SMDK5420
+
+#define CONFIG_VAR_SIZE_SPL
+
+#define CONFIG_SYS_SDRAM_BASE 0x20000000
+#define CONFIG_SYS_TEXT_BASE 0x23E00000
+#ifdef CONFIG_VAR_SIZE_SPL
+#define CONFIG_SPL_TEXT_BASE 0x02024410
+#else
+#define CONFIG_SPL_TEXT_BASE 0x02024400
+#endif
+#define CONFIG_IRAM_TOP 0x02074000
+
+#define CONFIG_SPL_MAX_FOOTPRINT (30 * 1024)
+
+#define CONFIG_DEVICE_TREE_LIST "exynos5420-peach-pit exynos5420-smdk5420"
+
+#define CONFIG_MAX_I2C_NUM 11
+
+/* Enable FIT support and comparison */
+#define CONFIG_FIT
+#define CONFIG_FIT_BEST_MATCH
+
+#define CONFIG_BOARD_REV_GPIO_COUNT 2
+
+#define CONFIG_BOOTCOMMAND "mmc read 20007000 451 2000; bootm 20007000"
+
+/*
+ * Put the initial stack pointer 1KB below this to allow room for the
+ * SPL marker. This value is arbitrary, but gd_t is placed starting here.
+ */
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_IRAM_TOP - 0x800)
+
+/* DRAM Memory Banks */
+#define CONFIG_NR_DRAM_BANKS 7
+#define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */
+
+#endif /* __CONFIG_EXYNOS5420_H */
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index fb93913..8197a72 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -203,7 +203,6 @@
#define CONFIG_USB_ETH_CDC
#define CONFIG_NETCONSOLE
#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
-#define CONFIG_USB_HUB_MIN_POWER_ON_DELAY 1200
/* Framebuffer and LCD */
#define CONFIG_VIDEO
diff --git a/include/configs/h2200.h b/include/configs/h2200.h
index d026484..5d0b85e 100644
--- a/include/configs/h2200.h
+++ b/include/configs/h2200.h
@@ -12,6 +12,7 @@
#define MACH_TYPE_H2200 341
#define CONFIG_MACH_TYPE MACH_TYPE_H2200
+#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_CPU_PXA25X 1
#define CONFIG_BOARD_H2200
diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h
index c1b3b63..3e55247 100644
--- a/include/configs/ids8313.h
+++ b/include/configs/ids8313.h
@@ -19,6 +19,8 @@
#define CONFIG_MPC8313
#define CONFIG_IDS8313
+#define CONFIG_SYS_GENERIC_BOARD
+
#define CONFIG_FSL_ELBC
#define CONFIG_MISC_INIT_R
@@ -576,11 +578,11 @@
#define CONFIG_FIT
#define CONFIG_FIT_SIGNATURE
+#define CONFIG_IMAGE_FORMAT_LEGACY
#define CONFIG_CMD_FDT
#define CONFIG_CMD_HASH
#define CONFIG_RSA
#define CONFIG_SHA1
#define CONFIG_SHA256
-#define CONFIG_OF_CONTROL
#endif /* __CONFIG_H */
diff --git a/include/configs/integrator-common.h b/include/configs/integrator-common.h
index 267a92b..eac517a 100644
--- a/include/configs/integrator-common.h
+++ b/include/configs/integrator-common.h
@@ -26,6 +26,7 @@
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_OF_LIBFDT /* enable passing a Device Tree */
#define CONFIG_MISC_INIT_R /* call misc_init_r during start up */
+#define CONFIG_SYS_GENERIC_BOARD
/*
* There are various dependencies on the core module (CM) fitted
diff --git a/include/configs/io.h b/include/configs/io.h
index 9da6cc6..8e32c25 100644
--- a/include/configs/io.h
+++ b/include/configs/io.h
@@ -40,6 +40,7 @@
/* new uImage format support */
#define CONFIG_FIT
#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
+#define CONFIG_FIT_DISABLE_SHA256
#define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */
@@ -64,9 +65,14 @@
/*
* Commands additional to the ones defined in amcc-common.h
*/
-#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DTT
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_DIAG
#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_IRQ
+#undef CONFIG_CMD_NFS
/*
* SDRAM configuration (please see cpu/ppc/sdram.[ch])
diff --git a/include/configs/iocon.h b/include/configs/iocon.h
index 79c4736..ae05bcb 100644
--- a/include/configs/iocon.h
+++ b/include/configs/iocon.h
@@ -17,7 +17,7 @@
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME iocon
-#define CONFIG_IDENT_STRING " iocon 0.05"
+#define CONFIG_IDENT_STRING " iocon 0.06"
#include "amcc-common.h"
#define CONFIG_BOARD_EARLY_INIT_F
@@ -39,6 +39,7 @@
/* new uImage format support */
#define CONFIG_FIT
#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
+#define CONFIG_FIT_DISABLE_SHA256
#define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */
@@ -62,9 +63,12 @@
* Commands additional to the ones defined in amcc-common.h
*/
#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_FPGA
-#define CONFIG_CMD_FPGA_LOADMK
+#define CONFIG_CMD_FPGAD
#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_IRQ
+#undef CONFIG_CMD_NFS
/*
* SDRAM configuration (please see cpu/ppc/sdram.[ch])
@@ -100,12 +104,27 @@
#define CONFIG_SYS_I2C_PPC4XX_CH0
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F
+#define CONFIG_SYS_I2C_IHS
#define CONFIG_SYS_I2C_SPEED 400000
+#define CONFIG_SYS_SPD_BUS_NUM 4
#define CONFIG_PCA953X /* NXP PCA9554 */
#define CONFIG_PCA9698 /* NXP PCA9698 */
+#define CONFIG_SYS_I2C_IHS_CH0
+#define CONFIG_SYS_I2C_IHS_SPEED_0 50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_0 0x7F
+#define CONFIG_SYS_I2C_IHS_CH1
+#define CONFIG_SYS_I2C_IHS_SPEED_1 50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_1 0x7F
+#define CONFIG_SYS_I2C_IHS_CH2
+#define CONFIG_SYS_I2C_IHS_SPEED_2 50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_2 0x7F
+#define CONFIG_SYS_I2C_IHS_CH3
+#define CONFIG_SYS_I2C_IHS_SPEED_3 50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_3 0x7F
+
/*
* Software (bit-bang) I2C driver configuration
*/
@@ -122,7 +141,9 @@
#define CONFIG_SYS_I2C_SOFT_SPEED_4 50000
#define CONFIG_SYS_I2C_SOFT_SLAVE_4 0x7F
-#define CONFIG_SYS_CH7301_I2C {1, 2, 3, 4}
+#define CONFIG_SYS_ICS8N3QV01_I2C {5, 6, 7, 8}
+#define CONFIG_SYS_CH7301_I2C {5, 6, 7, 8}
+#define CONFIG_SYS_DP501_I2C {0, 1, 2, 3}
#ifndef __ASSEMBLY__
void fpga_gpio_set(unsigned int bus, int pin);
@@ -151,12 +172,6 @@ int fpga_gpio_get(unsigned int bus, int pin);
#define I2C_DELAY udelay(25) /* 1/4 I2C clock duration */
/*
- * OSD hardware
- */
-#define CONFIG_SYS_MPC92469AC
-#define CONFIG_SYS_CH7301
-
-/*
* FLASH organization
*/
#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
@@ -284,8 +299,9 @@ int fpga_gpio_get(unsigned int bus, int pin);
* OSD Setup
*/
#define CONFIG_SYS_MPC92469AC
-#define CONFIG_SYS_CH7301
#define CONFIG_SYS_OSD_SCREENS 1
+#define CONFIG_SYS_DP501_DIFFERENTIAL
+#define CONFIG_SYS_DP501_VCAPCTRL0 0x01 /* DDR mode 0, DE for H/VSYNC */
#define CONFIG_BITBANGMII /* bit-bang MII PHY management */
#define CONFIG_BITBANGMII_MULTI
diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h
index 6255750..0b9e5b6 100644
--- a/include/configs/jetson-tk1.h
+++ b/include/configs/jetson-tk1.h
@@ -63,6 +63,7 @@
/* USB Host support */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_USB_STORAGE
#define CONFIG_CMD_USB
@@ -74,6 +75,7 @@
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
+#include "tegra-common-ums.h"
#include "tegra-common-post.h"
#endif /* __CONFIG_H */
diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h
index dde7329..858329f 100644
--- a/include/configs/k2hk_evm.h
+++ b/include/configs/k2hk_evm.h
@@ -71,7 +71,8 @@
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_MEM32
#define CONFIG_SYS_NS16550_REG_SIZE -4
-#define CONFIG_SYS_NS16550_COM1 K2HK_UART0_BASE
+#define CONFIG_SYS_NS16550_COM1 KS2_UART0_BASE
+#define CONFIG_SYS_NS16550_COM2 KS2_UART1_BASE
#define CONFIG_SYS_NS16550_CLK clk_get_rate(K2HK_CLK1_6)
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
@@ -128,12 +129,19 @@
#define CONFIG_SYS_SGMII_LINERATE_MHZ 1250
#define CONFIG_SYS_SGMII_RATESCALE 2
+/* AEMIF */
+#define CONFIG_TI_AEMIF
+#define CONFIG_AEMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE
+
/* NAND Configuration */
#define CONFIG_NAND_DAVINCI
+#define CONFIG_CMD_NAND_ECCLAYOUT
#define CONFIG_SYS_NAND_CS 2
#define CONFIG_SYS_NAND_USE_FLASH_BBT
#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
#define CONFIG_SYS_NAND_PAGE_2K
+#define CONFIG_SYS_NAND_MASK_CLE 0x4000
+#define CONFIG_SYS_NAND_MASK_ALE 0x2000
#define CONFIG_SYS_NAND_LARGEPAGE
#define CONFIG_SYS_NAND_BASE_LIST { 0x30000000, }
diff --git a/include/configs/kvme080.h b/include/configs/kvme080.h
deleted file mode 100644
index c352a1c..0000000
--- a/include/configs/kvme080.h
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- * (C) Copyright 2005
- * Sangmoon Kim, dogoil@etinsys.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_MPC8245 1
-#define CONFIG_KVME080 1
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-
-#define CONFIG_CONS_INDEX 1
-
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_BOOTDELAY 5
-
-#define CONFIG_IPADDR 192.168.0.2
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_SERVERIP 192.168.0.1
-
-#define CONFIG_BOOTARGS \
- "console=ttyS0,115200 " \
- "root=/dev/nfs rw nfsroot=192.168.0.1:/opt/eldk/ppc_82xx " \
- "ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:" \
- "kvme080:eth0:none " \
- "mtdparts=phys_mapped_flash:12m(root),-(kernel)"
-
-#define CONFIG_BOOTCOMMAND \
- "tftp 800000 kvme080/uImage; " \
- "bootm 800000"
-
-#define CONFIG_LOADADDR 800000
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_EARLY_INIT_R
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_LOADS_ECHO 1
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE
-
-#undef CONFIG_WATCHDOG
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_RTC_DS164x
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-
-#define CONFIG_NETCONSOLE
-
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START 0x00400000
-#define CONFIG_SYS_MEMTEST_END 0x07C00000
-
-#define CONFIG_SYS_LOAD_ADDR 0x00100000
-
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0x7C000000
-#define CONFIG_SYS_EUMB_ADDR 0xFC000000
-#define CONFIG_SYS_NVRAM_BASE_ADDR 0xFF000000
-#define CONFIG_SYS_NS16550_COM1 0xFF080000
-#define CONFIG_SYS_NS16550_COM2 0xFF080010
-#define CONFIG_SYS_NS16550_COM3 0xFF080020
-#define CONFIG_SYS_NS16550_COM4 0xFF080030
-#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
-
-#define CONFIG_SYS_MAX_RAM_SIZE 0x20000000
-#define CONFIG_SYS_FLASH_SIZE (16 * 1024 * 1024)
-#define CONFIG_SYS_NVRAM_SIZE 0x7FFF8
-
-#define CONFIG_VERY_BIG_RAM
-
-#define CONFIG_SYS_MONITOR_LEN 0x00040000
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MALLOC_LEN (512 << 10)
-
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-#define CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_PROTECT_CLEAR
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500
-
-#define CONFIG_SYS_JFFS2_FIRST_BANK 0
-#define CONFIG_SYS_JFFS2_NUM_BANKS 1
-
-#define CONFIG_ENV_IS_IN_NVRAM 1
-#define CONFIG_ENV_OVERWRITE 1
-#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE
-#define CONFIG_ENV_ADDR CONFIG_SYS_NVRAM_BASE_ADDR
-#define CONFIG_ENV_SIZE 0x400
-#define CONFIG_ENV_OFFSET 0
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK 14745600
-
-#define CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCI_PNP
-
-#define CONFIG_EEPRO100
-#define CONFIG_EEPRO100_SROM_WRITE
-
-#define CONFIG_SYS_RX_ETH_BUFFER 8
-
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 400000
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-
-#define CONFIG_SYS_CLK_FREQ 33333333
-
-#define CONFIG_SYS_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5
-#endif
-
-#define CONFIG_SYS_DLL_EXTEND 0x00
-#define CONFIG_SYS_PCI_HOLD_DEL 0x20
-
-#define CONFIG_SYS_ROMNAL 15
-#define CONFIG_SYS_ROMFAL 31
-
-#define CONFIG_SYS_REFINT 430
-
-#define CONFIG_SYS_DBUS_SIZE2 1
-
-#define CONFIG_SYS_BSTOPRE 121
-#define CONFIG_SYS_REFREC 8
-#define CONFIG_SYS_RDLAT 4
-#define CONFIG_SYS_PRETOACT 3
-#define CONFIG_SYS_ACTTOPRE 5
-#define CONFIG_SYS_ACTORW 3
-#define CONFIG_SYS_SDMODE_CAS_LAT 3
-#define CONFIG_SYS_SDMODE_WRAP 0
-
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
-#define CONFIG_SYS_EXTROM 1
-#define CONFIG_SYS_REGDIMM 0
-
-#define CONFIG_SYS_BANK0_START 0x00000000
-#define CONFIG_SYS_BANK0_END (0x4000000 - 1)
-#define CONFIG_SYS_BANK0_ENABLE 1
-#define CONFIG_SYS_BANK1_START 0x04000000
-#define CONFIG_SYS_BANK1_END (0x8000000 - 1)
-#define CONFIG_SYS_BANK1_ENABLE 1
-#define CONFIG_SYS_BANK2_START 0x3ff00000
-#define CONFIG_SYS_BANK2_END 0x3fffffff
-#define CONFIG_SYS_BANK2_ENABLE 0
-#define CONFIG_SYS_BANK3_START 0x3ff00000
-#define CONFIG_SYS_BANK3_END 0x3fffffff
-#define CONFIG_SYS_BANK3_ENABLE 0
-#define CONFIG_SYS_BANK4_START 0x00000000
-#define CONFIG_SYS_BANK4_END 0x00000000
-#define CONFIG_SYS_BANK4_ENABLE 0
-#define CONFIG_SYS_BANK5_START 0x00000000
-#define CONFIG_SYS_BANK5_END 0x00000000
-#define CONFIG_SYS_BANK5_ENABLE 0
-#define CONFIG_SYS_BANK6_START 0x00000000
-#define CONFIG_SYS_BANK6_END 0x00000000
-#define CONFIG_SYS_BANK6_ENABLE 0
-#define CONFIG_SYS_BANK7_START 0x00000000
-#define CONFIG_SYS_BANK7_END 0x00000000
-#define CONFIG_SYS_BANK7_ENABLE 0
-
-#define CONFIG_SYS_BANK_ENABLE 0x03
-
-#define CONFIG_SYS_ODCR 0x75
-#define CONFIG_SYS_PGMAX 0x32
-
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h
new file mode 100644
index 0000000..2bd5a47
--- /dev/null
+++ b/include/configs/ls2085a_common.h
@@ -0,0 +1,226 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LS2_COMMON_H
+#define __LS2_COMMON_H
+
+#define CONFIG_SYS_GENERIC_BOARD
+
+#define CONFIG_REMAKE_ELF
+#define CONFIG_FSL_LSCH3
+#define CONFIG_LS2085A
+#define CONFIG_GICV3
+
+/* Link Definitions */
+#define CONFIG_SYS_TEXT_BASE 0x30000000
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_SUPPORT_RAW_INITRD
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F 1
+
+#define CONFIG_IDENT_STRING " LS2085A-EMU"
+#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-EMU"
+
+/* Flat Device Tree Definitions */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+
+/* new uImage format support */
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
+
+#define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */
+#ifndef CONFIG_SYS_FSL_DDR4
+#define CONFIG_SYS_FSL_DDR3 /* Use DDR3 memory */
+#define CONFIG_SYS_DDR_RAW_TIMING
+#endif
+#define CONFIG_DIMM_SLOTS_PER_CTLR 1
+#define CONFIG_CHIP_SELECTS_PER_CTRL 4
+
+#define CONFIG_SYS_FSL_DDR_INTLV_256B /* force 256 byte interleaving */
+
+/* SMP Definitions */
+#define CPU_RELEASE_ADDR CONFIG_SYS_INIT_SP_ADDR
+
+#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
+#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL
+
+/* Generic Timer Definitions */
+#define COUNTER_FREQUENCY 12000000 /* 12MHz */
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
+
+/* I2C */
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_MXC_I2C1_SPEED 40000000
+#define CONFIG_SYS_MXC_I2C2_SPEED 40000000
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX 2
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2)
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/* IFC */
+#define CONFIG_FSL_IFC
+#define CONFIG_SYS_NOR0_CSPR_EXT (0x0)
+#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024)
+/*
+ * During booting, CS0 needs to be at the region of 0x30000000, i.e. the IFC
+ * address 0. But this region is limited to 256MB. To accommodate bigger NOR
+ * flash and other devices, we will map CS0 to 0x580000000 after relocation.
+ * CONFIG_SYS_FLASH_BASE has the final address (core view)
+ * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
+ * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
+ * CONFIG_SYS_TEXT_BASE is linked to 0x30000000 for booting
+ */
+#define CONFIG_SYS_FLASH_BASE 0x580000000ULL
+#define CONFIG_SYS_FLASH_BASE_PHYS 0x80000000
+#define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000
+
+/*
+ * NOR Flash Timing Params
+ */
+#define CONFIG_SYS_NOR0_CSPR \
+ (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
+ CSPR_PORT_SIZE_16 | \
+ CSPR_MSEL_NOR | \
+ CSPR_V)
+#define CONFIG_SYS_NOR0_CSPR_EARLY \
+ (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY) | \
+ CSPR_PORT_SIZE_16 | \
+ CSPR_MSEL_NOR | \
+ CSPR_V)
+#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(12)
+#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x1) | \
+ FTIM0_NOR_TEADC(0x1) | \
+ FTIM0_NOR_TEAHC(0x1))
+#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1) | \
+ FTIM1_NOR_TRAD_NOR(0x1))
+#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x0) | \
+ FTIM2_NOR_TCH(0x0) | \
+ FTIM2_NOR_TWP(0x1))
+#define CONFIG_SYS_NOR_FTIM3 0x04000000
+#define CONFIG_SYS_IFC_CCR 0x01000000
+
+#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY
+#define CONFIG_SYS_CSPR0_FINAL CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
+
+/* MC firmware */
+#define CONFIG_FSL_MC_ENET
+#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024)
+#define CONFIG_SYS_LS_MC_FW_IN_NOR
+#define CONFIG_SYS_LS_MC_FW_ADDR 0x580200000ULL
+/* TODO Actual FW length needs to be determined at runtime from FW header */
+#define CONFIG_SYS_LS_MC_FW_LENGTH (4U * 1024 * 1024)
+#define CONFIG_SYS_LS_MC_DPL_IN_NOR
+#define CONFIG_SYS_LS_MC_DPL_ADDR 0x5806C0000ULL
+/* TODO Actual DPL max length needs to be confirmed with the MC FW team */
+#define CONFIG_SYS_LS_MC_DPL_LENGTH 4096
+#define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0xe00000
+
+/* Carve the MC private DRAM block from the end of DRAM */
+#ifdef CONFIG_FSL_MC_ENET
+#define CONFIG_SYS_MEM_TOP_HIDE mc_get_dram_block_size()
+#endif
+
+/* Command line configuration */
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_SOURCE
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
+
+/* Physical Memory Map */
+/* fixme: these need to be checked against the board */
+#define CONFIG_CHIP_SELECTS_PER_CTRL 4
+#define CONFIG_SYS_CLK_FREQ 133333333
+
+
+#define CONFIG_NR_DRAM_BANKS 2
+
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_HWCONFIG
+#define HWCONFIG_BUFFER_SIZE 128
+
+#define CONFIG_DISPLAY_CPUINFO
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "hwconfig=fsl_ddr:bank_intlv=auto\0" \
+ "loadaddr=0x80100000\0" \
+ "kernel_addr=0x100000\0" \
+ "ramdisk_addr=0x800000\0" \
+ "ramdisk_size=0x2000000\0" \
+ "fdt_high=0xffffffffffffffff\0" \
+ "initrd_high=0xffffffffffffffff\0" \
+ "kernel_start=0x581200000\0" \
+ "kernel_load=0x806f0000\0" \
+ "kernel_size=0x1000000\0" \
+ "console=ttyAMA0,38400n8\0"
+
+#define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \
+ "earlyprintk=uart8250-8bit,0x21c0600"
+#define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \
+ "$kernel_size && bootm $kernel_load"
+#define CONFIG_BOOTDELAY 1
+
+/* Store environment at top of flash */
+#define CONFIG_ENV_IS_NOWHERE 1
+#define CONFIG_ENV_SIZE 0x1000
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PROMPT "> "
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_SYS_MAXARGS 64 /* max command args */
+
+#ifndef __ASSEMBLY__
+unsigned long mc_get_dram_block_size(void);
+#endif
+
+#endif /* __LS2_COMMON_H */
diff --git a/include/configs/ls2085a_emu.h b/include/configs/ls2085a_emu.h
new file mode 100644
index 0000000..a5cea63
--- /dev/null
+++ b/include/configs/ls2085a_emu.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2014 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LS2_EMU_H
+#define __LS2_EMU_H
+
+#include "ls2085a_common.h"
+
+#define CONFIG_DDR_SPD
+#define CONFIG_SYS_FSL_DDR_EMU /* Support emulator */
+#define SPD_EEPROM_ADDRESS1 0x51
+#define SPD_EEPROM_ADDRESS2 0x52
+#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1
+#define CONFIG_SYS_SPD_BUS_NUM 1 /* SPD on I2C bus 1 */
+
+#endif /* __LS2_EMU_H */
diff --git a/include/configs/ls2085a_simu.h b/include/configs/ls2085a_simu.h
new file mode 100644
index 0000000..46d47b0
--- /dev/null
+++ b/include/configs/ls2085a_simu.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LS2_SIMU_H
+#define __LS2_SIMU_H
+
+#include "ls2085a_common.h"
+
+/* SMSC 91C111 ethernet configuration */
+#define CONFIG_SMC91111
+#define CONFIG_SMC91111_BASE (0x2210000)
+
+#endif /* __LS2_SIMU_H */
diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
index aff2419..d464ad9 100644
--- a/include/configs/mx25pdk.h
+++ b/include/configs/mx25pdk.h
@@ -107,7 +107,7 @@
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_FSL
-#define CONFIG_PMIC_FSL_MC34704
+#define CONFIG_POWER_FSL_MC34704
#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x54
#define CONFIG_DOS_PARTITION
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index 0a46f4c..ab48144 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -52,7 +52,7 @@
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_FSL
-#define CONFIG_PMIC_FSL_MC13892
+#define CONFIG_POWER_FSL_MC13892
#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x08
#define CONFIG_RTC_MC13XXX
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index 5bbae8c..fb2072d 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -47,7 +47,7 @@
#define CONFIG_POWER_I2C
#define CONFIG_POWER_FSL
#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 8
-#define CONFIG_PMIC_FSL_MC13892
+#define CONFIG_POWER_FSL_MC13892
#define CONFIG_RTC_MC13XXX
/* MMC Configs */
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 12d79b4..a74508c 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -82,7 +82,7 @@
#define CONFIG_POWER_I2C
#define CONFIG_DIALOG_POWER
#define CONFIG_POWER_FSL
-#define CONFIG_PMIC_FSL_MC13892
+#define CONFIG_POWER_FSL_MC13892
#define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48
#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8
diff --git a/include/configs/neo.h b/include/configs/neo.h
index d549985..4937730 100644
--- a/include/configs/neo.h
+++ b/include/configs/neo.h
@@ -37,6 +37,7 @@
/* new uImage format support */
#define CONFIG_FIT
#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
+#define CONFIG_FIT_DISABLE_SHA256
#define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */
@@ -61,10 +62,14 @@
/*
* Commands additional to the ones defined in amcc-common.h
*/
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
#define CONFIG_CMD_DTT
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_DIAG
#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_IRQ
+#undef CONFIG_CMD_NFS
/*
* SDRAM configuration (please see cpu/ppc/sdram.[ch])
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 0a7df60..3782049 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -111,6 +111,7 @@
#define CONFIG_CMD_LED /* LED support */
#define CONFIG_CMD_SETEXPR /* Evaluate expressions */
#define CONFIG_CMD_GPIO /* Enable gpio command */
+#define CONFIG_CMD_DHCP
#define CONFIG_VIDEO_OMAP3 /* DSS Support */
@@ -295,6 +296,7 @@
#define CONFIG_SPL_OMAP3_ID_NAND
/* NAND boot config */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT 64
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h
index 7f3424b..ae4ce63 100644
--- a/include/configs/omap3_evm_common.h
+++ b/include/configs/omap3_evm_common.h
@@ -120,7 +120,7 @@
/* Max number of NAND devices */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
/* Timeout values (in ticks) */
#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index d56d5b0..79daabd 100644
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -187,6 +187,7 @@
/* NAND boot config */
#ifdef CONFIG_NAND
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT 64
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 0d03c75..8dcbba3 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -141,6 +141,7 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
/* NAND devices */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
#define CONFIG_JFFS2_NAND
/* nand device jffs2 lives on */
#define CONFIG_JFFS2_DEV "nand0"
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 7b97be9..f7483a0 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -83,7 +83,6 @@
/* Environment information */
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
- "fdtfile=overo.dtb\0" \
"bootdir=/boot\0" \
"bootfile=zImage\0" \
"usbtty=cdc_acm\0" \
@@ -152,10 +151,11 @@
"run mmcboot;" \
"fi;" \
"if run loadzimage; then " \
- "if test -n $fdtfile; then " \
- "if run loadfdt; then " \
- "run mmcbootfdt;" \
- "fi;" \
+ "if test $fdtfile; then " \
+ "setenv fdtfile omap3-${boardname}-${expansionname}.dtb;" \
+ "fi;" \
+ "if run loadfdt; then " \
+ "run mmcbootfdt;" \
"fi;" \
"fi;" \
"fi;" \
@@ -206,6 +206,7 @@
#define CONFIG_SYS_CACHELINE_SIZE 64
/* NAND boot config */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT 64
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index 7c5540f..3efe4cf 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -98,6 +98,7 @@
#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
/* to access nand at */
/* CS0 */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
/* Environment information */
diff --git a/include/configs/peach-pit.h b/include/configs/peach-pit.h
new file mode 100644
index 0000000..76b8d7a
--- /dev/null
+++ b/include/configs/peach-pit.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics
+ *
+ * Configuration settings for the SAMSUNG/GOOGLE PEACH-PIT board.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_PEACH_PIT_H
+#define __CONFIG_PEACH_PIT_H
+
+#include <configs/exynos5-dt.h>
+
+#include <configs/exynos5420.h>
+
+#undef CONFIG_DEFAULT_DEVICE_TREE
+#define CONFIG_DEFAULT_DEVICE_TREE exynos5420-peach-pit
+
+/* select serial console configuration */
+#define CONFIG_SERIAL3 /* use SERIAL 3 */
+
+#define CONFIG_SYS_PROMPT "Peach # "
+#define CONFIG_IDENT_STRING " for Peach"
+
+#endif /* __CONFIG_PEACH_PIT_H */
diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h
index fc25966..8510405 100644
--- a/include/configs/pengwyn.h
+++ b/include/configs/pengwyn.h
@@ -149,7 +149,6 @@
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
-#define GPMC_NAND_ECC_LP_x8_LAYOUT 1
#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \
"128k(SPL.backup1)," \
diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h
deleted file mode 100644
index e91e805..0000000
--- a/include/configs/quad100hd.h
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * (C) Copyright 2008
- * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/************************************************************************
- * quad100hd.h - configuration for Quad100hd board
- ***********************************************************************/
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*-----------------------------------------------------------------------
- * High Level Configuration Options
- *----------------------------------------------------------------------*/
-#define CONFIG_QUAD100HD 1 /* Board is Quad100hd */
-#define CONFIG_405EP 1 /* Specifc 405EP support*/
-
-#define CONFIG_SYS_TEXT_BASE 0xFFFC0000
-
-#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
-
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
-
-#define PLLMR0_DEFAULT PLLMR0_266_133_66 /* no PCI */
-#define PLLMR1_DEFAULT PLLMR1_266_133_66 /* no PCI */
-
-/* the environment is in the EEPROM by default */
-#define CONFIG_ENV_IS_IN_EEPROM
-#undef CONFIG_ENV_IS_IN_FLASH
-
-#define CONFIG_PPC4xx_EMAC
-#define CONFIG_HAS_ETH1 1
-#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_PHY_ADDR 0x01 /* PHY address */
-#define CONFIG_SYS_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
-#define CONFIG_PHY_RESET 1
-#define CONFIG_PHY_RESET_DELAY 300 /* PHY RESET recovery delay */
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#undef CONFIG_CMD_ASKENV
-#undef CONFIG_CMD_CACHE
-#define CONFIG_CMD_DHCP
-#undef CONFIG_CMD_DIAG
-#define CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#undef CONFIG_CMD_IRQ
-#define CONFIG_CMD_JFFS2
-#undef CONFIG_CMD_MII
-#define CONFIG_CMD_NAND
-#undef CONFIG_CMD_PING
-#define CONFIG_CMD_REGINFO
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-/*-----------------------------------------------------------------------
- * SDRAM
- *----------------------------------------------------------------------*/
-/*
- * SDRAM configuration (please see cpu/ppc/sdram.[ch])
- */
-#define CONFIG_SDRAM_BANK0 1
-
-/* FIX! SDRAM timings used in datasheet */
-#define CONFIG_SYS_SDRAM_CL 3 /* CAS latency */
-#define CONFIG_SYS_SDRAM_tRP 20 /* PRECHARGE command period */
-#define CONFIG_SYS_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE command period */
-#define CONFIG_SYS_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */
-#define CONFIG_SYS_SDRAM_tRFC 66 /* Auto refresh period */
-
-/*
- * JFFS2
- */
-#define CONFIG_SYS_JFFS2_FIRST_BANK 0
-#ifdef CONFIG_SYS_KERNEL_IN_JFFS2
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR 0 /* JFFS starts at block 0 */
-#else /* kernel not in JFFS */
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR 8 /* block 0-7 is kernel (1MB = 8 sectors) */
-#endif
-#define CONFIG_SYS_JFFS2_NUM_BANKS 1
-
-/*-----------------------------------------------------------------------
- * Serial Port
- *----------------------------------------------------------------------*/
-#define CONFIG_CONS_INDEX 1 /* Use UART0 */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK get_serial_clock()
-#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */
-#define CONFIG_SYS_BASE_BAUD 691200
-#define CONFIG_BAUDRATE 115200
-
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-
-/*-----------------------------------------------------------------------
- * Miscellaneous configurable options
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_info (bd_t) */
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
-#define CONFIG_LOOPW 1 /* enable loopw command */
-#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
-#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
-
-/*-----------------------------------------------------------------------
- * I2C
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_PPC4XX
-#define CONFIG_SYS_I2C_PPC4XX_CH0
-#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
-#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* base address */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* bytes of address */
-
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 8 byte write page size */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CONFIG_SYS_EEPROM_SIZE 0x2000
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0xFFC00000
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE)
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
-#define CONFIG_FLASH_CFI_DRIVER
-
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-#define CONFIG_SYS_FLASH_INCREMENT 0 /* there is only one bank */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
-/* the environment is located before u-boot */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_TEXT_BASE - CONFIG_ENV_SECT_SIZE)
-
-/* Address and size of Redundant Environment Sector */
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE)
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_EEPROM
-#define CONFIG_ENV_SIZE 0x400 /* Size of Environment vars */
-#define CONFIG_ENV_OFFSET 0x00000000
-#define CONFIG_SYS_ENABLE_CRC_16 1 /* Intrinsyc formatting used crc16 */
-#endif
-
-/* partly from PPCBoot */
-/* NAND */
-#define CONFIG_NAND
-#ifdef CONFIG_NAND
-#define CONFIG_SYS_NAND_BASE 0x60000000
-#define CONFIG_SYS_NAND_CS 10 /* our CS is GPIO10 */
-#define CONFIG_SYS_NAND_RDY 23 /* our RDY is GPIO23 */
-#define CONFIG_SYS_NAND_CE 24 /* our CE is GPIO24 */
-#define CONFIG_SYS_NAND_CLE 31 /* our CLE is GPIO31 */
-#define CONFIG_SYS_NAND_ALE 30 /* our ALE is GPIO30 */
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-
-#endif
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in data cache)
- */
-/* use on chip memory (OCM) for temperary stack until sdram is tested */
-/* see ./arch/powerpc/cpu/ppc4xx/start.S */
-#define CONFIG_SYS_TEMP_STACK_OCM 1
-
-/* On Chip Memory location */
-#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000
-#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of OCM */
-#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * External Bus Controller (EBC) Setup
- * Taken from PPCBoot board/icecube/icecube.h
- */
-
-/* see ./arch/powerpc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/ndfc.c */
-#define CONFIG_SYS_EBC_PB0AP 0x04002480
-/* AMD NOR flash - this corresponds to FLASH_BASE so may be correct */
-#define CONFIG_SYS_EBC_PB0CR 0xFFC5A000
-#define CONFIG_SYS_EBC_PB1AP 0x04005480
-#define CONFIG_SYS_EBC_PB1CR 0x60018000
-#define CONFIG_SYS_EBC_PB2AP 0x00000000
-#define CONFIG_SYS_EBC_PB2CR 0x00000000
-#define CONFIG_SYS_EBC_PB3AP 0x00000000
-#define CONFIG_SYS_EBC_PB3CR 0x00000000
-#define CONFIG_SYS_EBC_PB4AP 0x00000000
-#define CONFIG_SYS_EBC_PB4CR 0x00000000
-
-/*-----------------------------------------------------------------------
- * Definitions for GPIO setup (PPC405EP specific)
- *
- * Taken in part from PPCBoot board/icecube/icecube.h
- */
-/* see ./arch/powerpc/cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/start.S */
-#define CONFIG_SYS_GPIO0_OSRL 0x55555550
-#define CONFIG_SYS_GPIO0_OSRH 0x00000110
-#define CONFIG_SYS_GPIO0_ISR1L 0x00000000
-#define CONFIG_SYS_GPIO0_ISR1H 0x15555445
-#define CONFIG_SYS_GPIO0_TSRL 0x00000000
-#define CONFIG_SYS_GPIO0_TSRH 0x00000000
-#define CONFIG_SYS_GPIO0_TCR 0xFFFF8097
-#define CONFIG_SYS_GPIO0_ODR 0x00000000
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#endif
-
-/* ENVIRONMENT VARS */
-
-#define CONFIG_IPADDR 192.168.1.67
-#define CONFIG_SERVERIP 192.168.1.50
-#define CONFIG_GATEWAYIP 192.168.1.1
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_LOADADDR 300000
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT 1
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/quantum.h b/include/configs/quantum.h
deleted file mode 100644
index f3540c1..0000000
--- a/include/configs/quantum.h
+++ /dev/null
@@ -1,430 +0,0 @@
-/*
- * (C) Copyright 2003-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- * changes for 16M board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#undef CONFIG_MPC860
-#define CONFIG_MPC850 1 /* This is a MPC850 CPU */
-#define CONFIG_RPXLITE 1 /* QUANTUM is the RPXlite clone */
-#define CONFIG_RMU 1 /* The QUNATUM is based on our RMU */
-
-#define CONFIG_SYS_TEXT_BASE 0xfff00000
-
-#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600bps */
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-
-/* default developmenmt environment */
-
-#define CONFIG_ETHADDR 00:0B:17:00:00:00
-
-#define CONFIG_IPADDR 10.10.69.10
-#define CONFIG_SERVERIP 10.10.69.49
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_HOSTNAME QUANTUM
-#define CONFIG_ROOTPATH "/opt/eldk/pcc_8xx"
-
-#define CONFIG_BOOTARGS "root=/dev/ram rw"
-
-#define CONFIG_BOOTCOMMAND "bootm ff000000"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "serial#=12345\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0"
-
-/*
- * Select the more full-featured memory test (Barr embedded systems)
- */
-#define CONFIG_SYS_ALT_MEMTEST
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-
-/* M48T02 Paralled access timekeeper with same interface as the M48T35A*/
-#define CONFIG_RTC_M48T35A 1
-
-#if 0
-#define CONFIG_WATCHDOG 1 /* watchdog enabled */
-#else
-#undef CONFIG_WATCHDOG
-#endif
-
-/* NVRAM and RTC */
-#define CONFIG_SYS_NVRAM_BASE_ADDR 0xFA000000
-#define CONFIG_SYS_NVRAM_SIZE 2048
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SNTP
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
-#define CONFIG_AUTOBOOT_PROMPT \
- "\nEnter password - autoboot in %d sec...\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR "system"
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00040000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x01f00000 /* 256K ... 15 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFA200000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0xFF000000
-
-#if 1
- #define CONFIG_FLASH_CFI_DRIVER
-#else
- #undef CONFIG_FLASH_CFI_DRIVER
-#endif
-
-
-#ifdef CONFIG_FLASH_CFI_DRIVER
- #define CONFIG_SYS_FLASH_CFI 1
- #undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
- #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
-#endif
-
-/*%%% #define CONFIG_SYS_FLASH_BASE 0xFFF00000 */
-#if defined(DEBUG) || defined(CONFIG_CMD_IDE)
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#else
-#define CONFIG_SYS_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */
-#endif
-#define CONFIG_SYS_MONITOR_BASE 0xFFF00000
-/*%%% #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE */
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET 0x00040000 /* Offset of Environment Sector absolute address 0xfff40000*/
-#define CONFIG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */
-#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-
-/* Address and size of Redundant Environment Sector */
-#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
-
-/* FPGA */
-#define CONFIG_MISC_INIT_R
-#define CONFIG_SYS_FPGA_SPARTAN2
-#define CONFIG_SYS_FPGA_PROG_FEEDBACK
-
-
-/*-----------------------------------------------------------------------
- * Reset address
- */
-#define CONFIG_SYS_RESET_ADDRESS ((ulong)((((immap_t *)CONFIG_SYS_IMMR)->im_clkrst.res)))
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR (SIUMCR_MLRC10)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-/*%%%#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */
-#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
- */
-/* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_PLPRCR ( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS )
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK SCCR_EBDF00
-/* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_TBS)
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
- *-----------------------------------------------------------------------
- */
-
-#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
-#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
-
-#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
-#undef CONFIG_IDE_LED /* LED for ide not supported */
-#undef CONFIG_IDE_RESET /* reset for ide not supported */
-
-#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR
-
-/* Offset for data I/O */
-#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for alternate registers */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-/*#define CONFIG_SYS_DER 0x2002000F*/
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0 and OR0 (FLASH)
- */
-
-#define FLASH_BASE_PRELIM 0xFE000000 /* FLASH base */
-#define CONFIG_SYS_PRELIM_OR_AM 0xFE000000 /* OR addr mask */
-
-/* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 4, ETHR = 0, BIH = 1 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_4_CLK | OR_BI)
-
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V)
-
-/*
- * BR1 and OR1 (SDRAM)
- *
- */
-#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM base */
-#define SDRAM_MAX_SIZE 0x08000000 /* max 128 MB */
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
-#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000E00
-
-#define CONFIG_SYS_OR1_PRELIM (0xF0000000 | CONFIG_SYS_OR_TIMING_SDRAM ) /* map 256 MB */
-#define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-/* RPXLITE mem setting */
-#define CONFIG_SYS_BR3_PRELIM 0xFA400001 /* FPGA */
-#define CONFIG_SYS_OR3_PRELIM 0xFFFF8910
-
-#define CONFIG_SYS_BR4_PRELIM 0xFA000401 /* NVRAM&SRAM */
-#define CONFIG_SYS_OR4_PRELIM 0xFFFE0970
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* periodic timer for refresh */
-#define CONFIG_SYS_MAMR_PTA 20
-
-/*
- * Refresh clock Prescalar
- */
-#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV2
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
- MAMR_RLFA_16X | MAMR_WLFA_16X | MAMR_TLFA_16X)
-
-/*
- * BCSRx
- *
- * Board Status and Control Registers
- *
- */
-
-#define BCSR0 0xFA400000
-#define BCSR1 0xFA400001
-#define BCSR2 0xFA400002
-#define BCSR3 0xFA400003
-
-#define BCSR0_ENMONXCVR 0x01 /* Monitor XVCR Control */
-#define BCSR0_ENNVRAM 0x02 /* CS4# Control */
-#define BCSR0_LED5 0x04 /* LED5 control 0='on' 1='off' */
-#define BCSR0_LED4 0x08 /* LED4 control 0='on' 1='off' */
-#define BCSR0_FULLDPLX 0x10 /* Ethernet XCVR Control */
-#define BCSR0_COLTEST 0x20
-#define BCSR0_ETHLPBK 0x40
-#define BCSR0_ETHEN 0x80
-
-#define BCSR1_PCVCTL7 0x01 /* PC Slot B Control */
-#define BCSR1_PCVCTL6 0x02
-#define BCSR1_PCVCTL5 0x04
-#define BCSR1_PCVCTL4 0x08
-#define BCSR1_IPB5SEL 0x10
-
-#define BCSR2_ENPA5HDR 0x08 /* USB Control */
-#define BCSR2_ENUSBCLK 0x10
-#define BCSR2_USBPWREN 0x20
-#define BCSR2_USBSPD 0x40
-#define BCSR2_USBSUSP 0x80
-
-#define BCSR3_BWRTC 0x01 /* Real Time Clock Battery */
-#define BCSR3_BWNVR 0x02 /* NVRAM Battery */
-#define BCSR3_RDY_BSY 0x04 /* Flash Operation */
-#define BCSR3_RPXL 0x08 /* Reserved (reads back '1') */
-#define BCSR3_D27 0x10 /* Dip Switch settings */
-#define BCSR3_D26 0x20
-#define BCSR3_D25 0x40
-#define BCSR3_D24 0x80
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h
index ed8b4df..ff48598 100644
--- a/include/configs/rpi_b.h
+++ b/include/configs/rpi_b.h
@@ -20,6 +20,7 @@
#include <linux/sizes.h>
/* Architecture, CPU, etc.*/
+#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_ARM1176
#define CONFIG_BCM2835
#define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index 799d4fe..6e795bf 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -17,6 +17,7 @@
#define CONFIG_S5PC110 1 /* which is in a S5PC110 */
#define CONFIG_MACH_GONI 1 /* working with Goni */
+#include <linux/sizes.h>
#include <asm/arch/cpu.h> /* get chip and board defs */
#define CONFIG_ARCH_CPU_INIT
@@ -38,11 +39,9 @@
#define CONFIG_INITRD_TAG
#define CONFIG_CMDLINE_EDITING
-/*
- * Size of malloc() pool
- * 1MB = 0x100000, 0x100000 = 1024 * 1024
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
+/* Size of malloc() pool.*/
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 80 * SZ_1M)
+
/*
* select serial console configuration
*/
@@ -72,14 +71,27 @@
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_ONENAND
-#define CONFIG_CMD_MTDPARTS
#define CONFIG_CMD_MMC
-
-#define CONFIG_BOOTDELAY 1
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_DFU
+#define CONFIG_CMD_GPT
+
+/* USB Composite download gadget - g_dnl */
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_DFU_FUNCTION
+#define CONFIG_DFU_MMC
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
+#define DFU_DEFAULT_POLL_TIMEOUT 300
+
+/* TIZEN THOR downloader support */
+#define CONFIG_CMD_THOR_DOWNLOAD
+#define CONFIG_THOR_FUNCTION
+
+/* USB Samsung's IDs */
+#define CONFIG_G_DNL_VENDOR_NUM 0x04E8
+#define CONFIG_G_DNL_PRODUCT_NUM 0x6601
+#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM
+#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D
+#define CONFIG_G_DNL_MANUFACTURER "Samsung"
/* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
#define MTDIDS_DEFAULT "onenand0=samsung-onenand"
@@ -90,30 +102,52 @@
",7m(kernel)"\
",1m(log)"\
",12m(modem)"\
- ",60m(qboot)"\
- ",-(UBI)\0"
+ ",60m(qboot)\0"
-#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
+#define CONFIG_BOOTDELAY 1
+#define CONFIG_ZERO_BOOTDELAY_CHECK
-#define CONFIG_BOOTCOMMAND "run ubifsboot"
+/* partitions definitions */
+#define PARTS_CSA "csa-mmc"
+#define PARTS_BOOTLOADER "u-boot"
+#define PARTS_BOOT "boot"
+#define PARTS_ROOT "platform"
+#define PARTS_DATA "data"
+#define PARTS_CSC "csc"
+#define PARTS_UMS "ums"
+
+#define CONFIG_DFU_ALT \
+ "u-boot raw 0x80 0x400;" \
+ "uImage ext4 0 2;" \
+ "exynos3-goni.dtb ext4 0 2;" \
+ ""PARTS_ROOT" part 0 5\0"
+
+#define PARTS_DEFAULT \
+ "uuid_disk=${uuid_gpt_disk};" \
+ "name="PARTS_CSA",size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
+ "name="PARTS_BOOTLOADER",size=60MiB," \
+ "uuid=${uuid_gpt_"PARTS_BOOTLOADER"};" \
+ "name="PARTS_BOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
+ "name="PARTS_ROOT",size=1GiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
+ "name="PARTS_DATA",size=3GiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
+ "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
+ "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
+
+#define CONFIG_BOOTCOMMAND "run mmcboot"
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
-#define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext2" \
+#define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext4" \
" ${console} ${meminfo}"
#define CONFIG_COMMON_BOOT "${console} ${meminfo} ${mtdparts}"
-#define CONFIG_BOOTARGS "root=/dev/mtdblock8 ubi.mtd=8 ubi.mtd=3 ubi.mtd=6" \
- " rootfstype=cramfs " CONFIG_COMMON_BOOT
+#define CONFIG_BOOTARGS "root=/dev/mtdblock8 rootfstype=ext4 " \
+ CONFIG_COMMON_BOOT
#define CONFIG_UPDATEB "updateb=onenand erase 0x0 0x100000;" \
" onenand write 0x32008000 0x0 0x100000\0"
-#define CONFIG_UBI_MTD " ubi.mtd=${ubiblock} ubi.mtd=3 ubi.mtd=6"
-
-#define CONFIG_UBIFS_OPTION "rootflags=bulk_read,no_chk_data_crc"
-
#define CONFIG_MISC_COMMON
#define CONFIG_MISC_INIT_R
@@ -130,42 +164,44 @@
"onenand erase 0x01560000 0x1eaa0000;" \
"onenand write 0x32000000 0x1260000 0x8C0000\0" \
"bootk=" \
- "onenand read 0x30007FC0 0xc00000 0x600000;" \
+ "run loaduimage;" \
"bootm 0x30007FC0\0" \
"flashboot=" \
"set bootargs root=/dev/mtdblock${bootblock} " \
- "rootfstype=${rootfstype}" CONFIG_UBI_MTD " ${opts} " \
+ "rootfstype=${rootfstype} ${opts} " \
"${lcdinfo} " CONFIG_COMMON_BOOT "; run bootk\0" \
"ubifsboot=" \
"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
- CONFIG_UBIFS_OPTION CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \
+ "${opts} ${lcdinfo} " \
CONFIG_COMMON_BOOT "; run bootk\0" \
"tftpboot=" \
"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
- CONFIG_UBIFS_OPTION CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \
- CONFIG_COMMON_BOOT "; tftp 0x30007FC0 uImage; " \
- "bootm 0x30007FC0\0" \
+ "${opts} ${lcdinfo} " CONFIG_COMMON_BOOT \
+ "; tftp 0x30007FC0 uImage; bootm 0x30007FC0\0" \
"ramboot=" \
"set bootargs " CONFIG_RAMDISK_BOOT \
- " initrd=0x33000000,8M ramdisk=8192\0" \
+ "initrd=0x33000000,8M ramdisk=8192\0" \
"mmcboot=" \
- "set bootargs root=${mmcblk} rootfstype=${rootfstype}" \
- CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \
+ "set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
+ "rootfstype=${rootfstype} ${opts} ${lcdinfo} " \
CONFIG_COMMON_BOOT "; run bootk\0" \
"boottrace=setenv opts initcall_debug; run bootcmd\0" \
"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
"verify=n\0" \
- "rootfstype=cramfs\0" \
+ "rootfstype=ext4\0" \
"console=" CONFIG_DEFAULT_CONSOLE \
- "mtdparts=" MTDPARTS_DEFAULT \
"meminfo=mem=80M mem=256M@0x40000000 mem=128M@0x50000000\0" \
- "mmcblk=/dev/mmcblk1p1\0" \
+ "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x30007FC0 uImage\0" \
+ "mmcdev=0\0" \
+ "mmcbootpart=2\0" \
+ "mmcrootpart=5\0" \
+ "partitions=" PARTS_DEFAULT \
"bootblock=9\0" \
"ubiblock=8\0" \
"ubi=enabled\0" \
- "opts=always_resume=1"
+ "opts=always_resume=1\0" \
+ "dfu_alt_info=" CONFIG_DFU_ALT "\0"
-/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT "Goni # "
@@ -192,9 +228,12 @@
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 KiB */
/* FLASH and environment organization */
-#define CONFIG_ENV_IS_IN_ONENAND 1
-#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB, 0x40000 */
-#define CONFIG_ENV_ADDR (1 << 20) /* 1 MB, 0x100000 */
+#define CONFIG_MMC_DEFAULT_DEV 0
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV
+#define CONFIG_ENV_SIZE 4096
+#define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */
+#define CONFIG_ENV_OVERWRITE
#define CONFIG_USE_ONENAND_BOARD_INIT
#define CONFIG_SAMSUNG_ONENAND 1
@@ -202,6 +241,18 @@
#define CONFIG_DOS_PARTITION 1
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
+
+/* write support for filesystems */
+#define CONFIG_FAT_WRITE
+#define CONFIG_EXT4_WRITE
+
+/* GPT */
+#define CONFIG_EFI_PARTITION
+#define CONFIG_PARTITION_UUIDS
+
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
#define CONFIG_SYS_CACHELINE_SIZE 64
@@ -226,5 +277,8 @@
#define CONFIG_USB_GADGET
#define CONFIG_USB_GADGET_S3C_UDC_OTG
#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
+#define CONFIG_CMD_USB_MASS_STORAGE
+#define CONFIG_USB_GADGET_MASS_STORAGE
#endif /* __CONFIG_H */
diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
index 41c946d..f72ab0b 100644
--- a/include/configs/sama5d3_xplained.h
+++ b/include/configs/sama5d3_xplained.h
@@ -18,15 +18,20 @@
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
-#define CONFIG_AT91FAMILY
#define CONFIG_ARCH_CPU_INIT
+
+#ifndef CONFIG_SPL_BUILD
#define CONFIG_SKIP_LOWLEVEL_INIT
+#endif
+
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_CMD_BOOTZ
#define CONFIG_OF_LIBFDT /* Device Tree support */
+#define CONFIG_SYS_GENERIC_BOARD
+
/* general purpose I/O */
#define CONFIG_AT91_GPIO
@@ -74,8 +79,12 @@
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
#define CONFIG_SYS_SDRAM_SIZE 0x10000000
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_INIT_SP_ADDR 0x310000
+#else
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+#endif
/* NAND flash */
#define CONFIG_CMD_NAND
@@ -199,4 +208,46 @@
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
+/* SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE 0x300000
+#define CONFIG_SPL_MAX_SIZE 0x10000
+#define CONFIG_SPL_BSS_START_ADDR 0x20000000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
+#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SYS_MONITOR_LEN (512 << 10)
+
+#ifdef CONFIG_SYS_USE_MMC
+#define CONFIG_SPL_LDSCRIPT arch/arm/cpu/at91-common/u-boot-spl.lds
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+
+#elif CONFIG_SYS_USE_NANDFLASH
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_SIZE 0x800
+#define CONFIG_SYS_NAND_PAGE_COUNT 64
+#define CONFIG_SYS_NAND_OOBSIZE 64
+#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0
+
+#endif
+
#endif
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index 516be85..da27180 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -21,7 +21,6 @@
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
-#define CONFIG_AT91FAMILY
#define CONFIG_ARCH_CPU_INIT
#ifndef CONFIG_SPL_BUILD
@@ -34,6 +33,8 @@
#define CONFIG_CMD_BOOTZ
#define CONFIG_OF_LIBFDT /* Device Tree support */
+#define CONFIG_SYS_GENERIC_BOARD
+
/* general purpose I/O */
#define CONFIG_AT91_GPIO
@@ -281,6 +282,7 @@
#define CONFIG_SYS_NAND_OOBSIZE 64
#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0
+#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
#elif CONFIG_SYS_USE_SERIALFLASH
#define CONFIG_SPL_SPI_SUPPORT
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index 6bb2546..12b69d9 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -16,6 +16,9 @@
#endif
+#define CONFIG_IO_TRACE
+#define CONFIG_CMD_IOTRACE
+
#define CONFIG_SYS_TIMER_RATE 1000000
#define CONFIG_BOOTSTAGE
@@ -41,6 +44,7 @@
#define CONFIG_RSA
#define CONFIG_CMD_FDT
#define CONFIG_DEFAULT_DEVICE_TREE sandbox
+#define CONFIG_ANDROID_BOOT_IMAGE
#define CONFIG_FS_FAT
#define CONFIG_FS_EXT4
diff --git a/include/configs/smdk5420.h b/include/configs/smdk5420.h
index 58f706a..606739b 100644
--- a/include/configs/smdk5420.h
+++ b/include/configs/smdk5420.h
@@ -1,58 +1,27 @@
/*
* Copyright (C) 2013 Samsung Electronics
*
- * Configuration settings for the SAMSUNG EXYNOS5420 board.
+ * Configuration settings for the SAMSUNG SMDK5420 board.
*
* SPDX-License-Identifier: GPL-2.0+
*/
-#ifndef __CONFIG_5420_H
-#define __CONFIG_5420_H
+#ifndef __CONFIG_SMDK5420_H
+#define __CONFIG_SMDK5420_H
#include <configs/exynos5-dt.h>
-#define CONFIG_EXYNOS5420 /* which is in a Exynos5 Family */
+#include <configs/exynos5420.h>
+
#define CONFIG_SMDK5420 /* which is in a SMDK5420 */
#undef CONFIG_DEFAULT_DEVICE_TREE
#define CONFIG_DEFAULT_DEVICE_TREE exynos5420-smdk5420
-#define CONFIG_VAR_SIZE_SPL
-
-#define CONFIG_SYS_SDRAM_BASE 0x20000000
-#define CONFIG_SYS_TEXT_BASE 0x23E00000
-
-#define CONFIG_BOARD_REV_GPIO_COUNT 2
-
-/* MACH_TYPE_SMDK5420 macro will be removed once added to mach-types */
-#define MACH_TYPE_SMDK5420 8002 /* Temporary number */
-#define CONFIG_MACH_TYPE MACH_TYPE_SMDK5420
-
/* select serial console configuration */
-#define CONFIG_SERIAL3 /* use SERIAL 3 */
-
-#ifdef CONFIG_VAR_SIZE_SPL
-#define CONFIG_SPL_TEXT_BASE 0x02024410
-#else
-#define CONFIG_SPL_TEXT_BASE 0x02024400
-#endif
-
-#define CONFIG_BOOTCOMMAND "mmc read 20007000 451 2000; bootm 20007000"
-
-#define CONFIG_SYS_PROMPT "SMDK5420 # "
-#define CONFIG_IDENT_STRING " for SMDK5420"
-
-#define CONFIG_IRAM_TOP 0x02074000
-/*
- * Put the initial stack pointer 1KB below this to allow room for the
- * SPL marker. This value is arbitrary, but gd_t is placed starting here.
- */
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_IRAM_TOP - 0x800)
-
-#define CONFIG_MAX_I2C_NUM 11
+#define CONFIG_SERIAL3 /* use SERIAL 3 */
-/* Enable FIT support and comparison */
-#define CONFIG_FIT
-#define CONFIG_FIT_BEST_MATCH
+#define CONFIG_SYS_PROMPT "SMDK5420 # "
+#define CONFIG_IDENT_STRING " for SMDK5420"
-#endif /* __CONFIG_5420_H */
+#endif /* __CONFIG_SMDK5420_H */
diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h
index 0254249..262e744 100644
--- a/include/configs/socfpga_cyclone5.h
+++ b/include/configs/socfpga_cyclone5.h
@@ -8,6 +8,7 @@
#include <asm/arch/socfpga_base_addrs.h>
#include "../../board/altera/socfpga/pinmux_config.h"
+#include "../../board/altera/socfpga/iocsr_config.h"
#include "../../board/altera/socfpga/pll_config.h"
/*
@@ -201,11 +202,23 @@
#else
#define CONFIG_SYS_TIMER_RATE 25000000
#endif
+#define CONFIG_SYS_TIMER_COUNTS_DOWN
#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4)
#define CONFIG_ENV_IS_NOWHERE
/*
+ * L4 Watchdog
+ */
+#define CONFIG_HW_WATCHDOG
+#define CONFIG_HW_WATCHDOG_TIMEOUT_MS 2000
+#define CONFIG_DESIGNWARE_WATCHDOG
+#define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS
+/* Clocks source frequency to watchdog timer */
+#define CONFIG_DW_WDT_CLOCK_KHZ 25000
+
+
+/*
* SPL "Second Program Loader" aka Initial Software
*/
@@ -237,4 +250,7 @@
/* Support for lib/libgeneric.o in SPL binary */
#define CONFIG_SPL_LIBGENERIC_SUPPORT
+/* Support for watchdog */
+#define CONFIG_SPL_WATCHDOG_SUPPORT
+
#endif /* __CONFIG_H */
diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h
deleted file mode 100644
index 127de00..0000000
--- a/include/configs/spc1920.h
+++ /dev/null
@@ -1,405 +0,0 @@
-/*
- * (C) Copyright 2006
- * Markus Klotzbuecher, DENX Software Engineering, mk@denx.de
- *
- * Configuation settings for the SPC1920 board.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __H
-#define __CONFIG_H
-
-#define CONFIG_SPC1920 1 /* SPC1920 board */
-#define CONFIG_MPC885 1 /* MPC885 CPU */
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-
-#define CONFIG_8xx_CONS_SMC1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-
-#define CONFIG_MII
-#define CONFIG_MII_INIT 1
-#undef CONFIG_ETHER_ON_FEC1
-#define CONFIG_ETHER_ON_FEC2
-#define FEC_ENET
-#define CONFIG_FEC2_PHY 1
-
-#define CONFIG_BAUDRATE 19200
-
-/* use PLD CLK4 instead of brg */
-#define CONFIG_SYS_SPC1920_SMC1_CLK4
-
-#define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */
-#define CONFIG_8xx_CPUCLK_DEFAULT 50000000
-#define CONFIG_SYS_8xx_CPUCLK_MIN 40000000
-#define CONFIG_SYS_8xx_CPUCLK_MAX 133000000
-
-#define CONFIG_SYS_RESET_ADDRESS 0xC0000000
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_LAST_STAGE_INIT
-
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_NFSBOOTCOMMAND \
- "dhcp;" \
- "setenv bootargs root=/dev/nfs rw nfsroot=$rootpath " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:eth0:off;" \
- "bootm"
-
-#define CONFIG_BOOTCOMMAND \
- "setenv bootargs root=/dev/mtdblock2 rw mtdparts=phys:1280K(ROM)ro,-(root) "\
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:eth0:off;" \
- "bootm fe080000"
-
-#undef CONFIG_BOOTARGS
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_BZIP2 /* include support for bzip2 compressed images */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00100000
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 2400, 4800, 9600, 19200 }
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xF0000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 KB for monitor */
-
-#ifdef CONFIG_BZIP2
-#define CONFIG_SYS_MALLOC_LEN (2500 << 10) /* Reserve ~2.5 MB for malloc() */
-#else
-#define CONFIG_SYS_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */
-#endif /* CONFIG_BZIP2 */
-
-#define CONFIG_SYS_ALLOC_DPRAM 1 /* use allocation routines */
-
-/*
- * Flash
- */
-/*-----------------------------------------------------------------------
- * Flash organisation
- */
-#define CONFIG_SYS_FLASH_BASE 0xFE000000
-#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
-#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max num of sects on one chip */
-
-/* Environment is in flash */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SECT_SIZE 0x40000 /* We use one complete sector */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-
-#define CONFIG_ENV_OVERWRITE
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-
-#ifdef CONFIG_CMD_DATE
-# define CONFIG_RTC_DS3231
-# define CONFIG_SYS_I2C_RTC_ADDR 0x68
-#endif
-
-/*-----------------------------------------------------------------------
- * I2C configuration
- */
-#if defined(CONFIG_CMD_I2C)
-/* enable I2C and select the hardware/software driver */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED 93000 /* 93 kHz is supposed to work */
-#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
-/*
- * Software (bit-bang) I2C driver configuration
- */
-#define PB_SCL 0x00000020 /* PB 26 */
-#define PB_SDA 0x00000010 /* PB 27 */
-
-#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL)
-#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA)
-#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA)
-#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
-#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \
- else immr->im_cpm.cp_pbdat &= ~PB_SDA
-#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
- else immr->im_cpm.cp_pbdat &= ~PB_SCL
-#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR (SIUMCR_FRC)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK SCCR_EBDF11
-/* #define CONFIG_SYS_SCCR SCCR_TBS */
-#define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
- SCCR_DFALCD00)
-
-/*-----------------------------------------------------------------------
- * DER - Debug Enable Register
- *-----------------------------------------------------------------------
- * Set to zero to prevent the processor from entering debug mode
- */
-#define CONFIG_SYS_DER 0
-
-
-/* Because of the way the 860 starts up and assigns CS0 the entire
- * address space, we have to set the memory controller differently.
- * Normally, you write the option register first, and then enable the
- * chip select by writing the base register. For CS0, you must write
- * the base register first, followed by the option register.
- */
-
-
-/*
- * Init Memory Controller:
- */
-
-/* BR0 and OR0 (FLASH) */
-#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* FLASH bank #0 */
-
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
-
-/*
- * FLASH timing:
- */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
- OR_SCY_6_CLK | OR_EHTR | OR_BI)
-
-#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
-
-
-/*
- * SDRAM CS1 UPMB
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_SDRAM_BASE_PRELIM CONFIG_SYS_SDRAM_BASE
-#define SDRAM_MAX_SIZE 0x4000000 /* max 64 MB */
-
-#define CONFIG_SYS_PRELIM_OR1_AM 0xF0000000
-/* #define CONFIG_SYS_OR1_TIMING OR_CSNT_SAM/\* | OR_G5LS /\\* *\\/ *\/ */
-#define SDRAM_TIMING OR_SCY_0_CLK /* SDRAM-Timing */
-
-#define CONFIG_SYS_OR1_PRELIM (CONFIG_SYS_PRELIM_OR1_AM | OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING)
-#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V)
-
-/* #define CONFIG_SYS_OR1_FINAL ((CONFIG_SYS_OR1_AM & OR_AM_MSK) | CONFIG_SYS_OR1_TIMING) */
-/* #define CONFIG_SYS_BR1_FINAL ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V) */
-
-#define CONFIG_SYS_PTB_PER_CLK ((4096 * 16 * 1000) / (4 * 64))
-#define CONFIG_SYS_PTA_PER_CLK 195
-#define CONFIG_SYS_MBMR_PTB 195
-#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV16
-#define CONFIG_SYS_MAR 0x88
-
-#define CONFIG_SYS_MBMR_8COL ((CONFIG_SYS_MBMR_PTB << MBMR_PTB_SHIFT) | \
- MBMR_AMB_TYPE_0 | \
- MBMR_G0CLB_A10 | \
- MBMR_DSB_1_CYCL | \
- MBMR_RLFB_1X | \
- MBMR_WLFB_1X | \
- MBMR_TLFB_4X) /* 0x04804114 */ /* 0x10802114 */
-
-#define CONFIG_SYS_MBMR_9COL ((CONFIG_SYS_MBMR_PTB << MBMR_PTB_SHIFT) | \
- MBMR_AMB_TYPE_1 | \
- MBMR_G0CLB_A10 | \
- MBMR_DSB_1_CYCL | \
- MBMR_RLFB_1X | \
- MBMR_WLFB_1X | \
- MBMR_TLFB_4X) /* 0x04804114 */ /* 0x10802114 */
-
-
-/*
- * DSP Host Port Interface CS3
- */
-#define CONFIG_SYS_SPC1920_HPI_BASE 0x90000000
-#define CONFIG_SYS_PRELIM_OR3_AM 0xF8000000
-
-#define CONFIG_SYS_OR3 (CONFIG_SYS_PRELIM_OR3_AM | \
- OR_G5LS | \
- OR_SCY_0_CLK | \
- OR_BI)
-
-#define CONFIG_SYS_BR3 ((CONFIG_SYS_SPC1920_HPI_BASE & BR_BA_MSK) | \
- BR_MS_UPMA | \
- BR_PS_16 | \
- BR_V)
-
-#define CONFIG_SYS_MAMR (MAMR_GPL_A4DIS | \
- MAMR_RLFA_5X | \
- MAMR_WLFA_5X)
-
-#define CONFIG_SPC1920_HPI_TEST
-
-#ifdef CONFIG_SPC1920_HPI_TEST
-#define HPI_REG(x) (*((volatile u16 *) (CONFIG_SYS_SPC1920_HPI_BASE + x)))
-#define HPI_HPIC_1 HPI_REG(0)
-#define HPI_HPIC_2 HPI_REG(2)
-#define HPI_HPIA_1 HPI_REG(0x2000008)
-#define HPI_HPIA_2 HPI_REG(0x2000008 + 2)
-#define HPI_HPID_INC_1 HPI_REG(0x1000004)
-#define HPI_HPID_INC_2 HPI_REG(0x1000004 + 2)
-#define HPI_HPID_NOINC_1 HPI_REG(0x300000c)
-#define HPI_HPID_NOINC_2 HPI_REG(0x300000c + 2)
-#endif /* CONFIG_SPC1920_HPI_TEST */
-
-/*
- * Ramtron FM18L08 FRAM 32KB on CS4
- */
-#define CONFIG_SYS_SPC1920_FRAM_BASE 0x80100000
-#define CONFIG_SYS_PRELIM_OR4_AM 0xffff8000
-#define CONFIG_SYS_OR4 (CONFIG_SYS_PRELIM_OR4_AM | \
- OR_ACS_DIV2 | \
- OR_BI | \
- OR_SCY_4_CLK | \
- OR_TRLX)
-
-#define CONFIG_SYS_BR4 ((CONFIG_SYS_SPC1920_FRAM_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
-
-/*
- * PLD CS5
- */
-#define CONFIG_SYS_SPC1920_PLD_BASE 0x80000000
-#define CONFIG_SYS_PRELIM_OR5_AM 0xffff8000
-
-#define CONFIG_SYS_OR5_PRELIM (CONFIG_SYS_PRELIM_OR5_AM | \
- OR_CSNT_SAM | \
- OR_ACS_DIV1 | \
- OR_BI | \
- OR_SCY_0_CLK | \
- OR_TRLX)
-
-#define CONFIG_SYS_BR5_PRELIM ((CONFIG_SYS_SPC1920_PLD_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 3522c1a..0c2f0f1 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -185,6 +185,7 @@
/* Configure the PISMO */
#define PISMO1_NAND_SIZE GPMC_SIZE_128M
+#define CONFIG_NAND
#define CONFIG_NAND_OMAP_GPMC
#define CONFIG_ENV_IS_IN_NAND
#define SMNAND_ENV_OFFSET 0x180000 /* environment starts here */
@@ -249,6 +250,7 @@
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
/* NAND boot config */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
#define CONFIG_SYS_NAND_PAGE_COUNT 64
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
#define CONFIG_SYS_NAND_OOBSIZE 64
diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index 9c04c23..1b0fee9 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -137,10 +137,10 @@
#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
/* to access nand at */
/* CS0 */
-#define GPMC_NAND_ECC_LP_x16_LAYOUT
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
/* devices */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
/* Environment information */
#define CONFIG_BOOTDELAY 3
diff --git a/include/configs/tb100.h b/include/configs/tb100.h
new file mode 100644
index 0000000..8a861a8
--- /dev/null
+++ b/include/configs/tb100.h
@@ -0,0 +1,123 @@
+/*
+ * Copyright (C) 2011-2014 Pierrick Hascoet, Abilis Systems
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _CONFIG_TB100_H_
+#define _CONFIG_TB100_H_
+
+#include <linux/sizes.h>
+
+/*
+ * CPU configuration
+ */
+#define CONFIG_ARC700
+#define CONFIG_ARC_MMU_VER 3
+#define CONFIG_SYS_CACHELINE_SIZE 32
+#define CONFIG_SYS_CLK_FREQ 500000000
+#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ
+
+/*
+ * Board configuration
+ */
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_ARCH_EARLY_INIT_R
+
+/*
+ * Memory configuration
+ */
+#define CONFIG_SYS_TEXT_BASE 0x84000000
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
+#define CONFIG_SYS_SDRAM_SIZE SZ_128M
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_SYS_MALLOC_LEN SZ_128K
+#define CONFIG_SYS_BOOTM_LEN SZ_32M
+#define CONFIG_SYS_LOAD_ADDR 0x82000000
+
+#define CONFIG_SYS_NO_FLASH
+
+/*
+ * UART configuration
+ */
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE -4
+#define CONFIG_SYS_NS16550_CLK 166666666
+#define CONFIG_SYS_NS16550_COM1 0xFF100000
+#define CONFIG_SYS_NS16550_MEM32
+
+#define CONFIG_BAUDRATE 115200
+
+/*
+ * Ethernet PHY configuration
+ */
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_GIGE
+
+/*
+ * Even though the board houses Realtek RTL8211E PHY
+ * corresponding PHY driver (drivers/net/phy/realtek.c) behaves unexpectedly.
+ * In particular "parse_status" reports link is down.
+ *
+ * Until Realtek PHY driver is fixed fall back to generic PHY driver
+ * which implements all required functionality and behaves much more stable.
+ *
+ * #define CONFIG_PHY_REALTEK
+ *
+ */
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_DESIGNWARE_ETH
+#define ETH0_BASE_ADDRESS 0xFE100000
+#define ETH1_BASE_ADDRESS 0xFE110000
+
+/*
+ * Command line configuration
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_PING
+
+#define CONFIG_OF_LIBFDT
+
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_MAXARGS 16
+
+/*
+ * Environment settings
+ */
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_SIZE SZ_2K
+#define CONFIG_ENV_OFFSET 0
+
+/*
+ * Environment configuration
+ */
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTFILE "uImage"
+#define CONFIG_BOOTARGS "console=ttyS0,115200n8"
+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
+
+/*
+ * Console configuration
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT "[tb100]:~# "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+
+#endif /* _CONFIG_TB100_H_ */
diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h
index 76dad4e..1c770c9 100644
--- a/include/configs/tegra-common-post.h
+++ b/include/configs/tegra-common-post.h
@@ -101,13 +101,12 @@
\
"do_sysboot_boot=" \
"sysboot ${devtype} ${devnum}:${rootpart} any " \
- "${scriptaddr} ${prefix}extlinux.conf\0" \
+ "${scriptaddr} ${prefix}extlinux/extlinux.conf\0" \
\
"sysboot_boot=" \
"if test -e ${devtype} ${devnum}:${rootpart} " \
- "${prefix}extlinux.conf; then " \
- "echo Found extlinux config " \
- "${prefix}extlinux.conf; " \
+ "${prefix}extlinux/extlinux.conf; then " \
+ "echo Found ${prefix}extlinux/extlinux.conf; " \
"run do_sysboot_boot; " \
"echo SCRIPT FAILED: continuing...; " \
"fi\0" \
@@ -174,6 +173,8 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
TEGRA_DEVICE_SETTINGS \
MEM_LAYOUT_ENV_SETTINGS \
+ "fdt_high=ffffffff\0" \
+ "initrd_high=ffffffff\0" \
BOOTCMDS_COMMON \
BOARD_EXTRA_ENV_SETTINGS
diff --git a/include/configs/tegra-common-ums.h b/include/configs/tegra-common-ums.h
new file mode 100644
index 0000000..578ca68
--- /dev/null
+++ b/include/configs/tegra-common-ums.h
@@ -0,0 +1,26 @@
+/*
+ * (C) Copyright 2014
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _TEGRA_COMMON_UMS_H_
+#define _TEGRA_COMMON_UMS_H_
+
+#ifndef CONFIG_SPL_BUILD
+/* USB gadget, and mass storage protocol */
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
+#define CONFIG_CI_UDC
+#define CONFIG_CI_UDC_HAS_HOSTPC
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_G_DNL_VENDOR_NUM 0x0955
+#define CONFIG_G_DNL_PRODUCT_NUM 0x701A
+#define CONFIG_G_DNL_MANUFACTURER "NVIDIA"
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_CMD_USB_MASS_STORAGE
+#endif
+
+#endif /* _TEGRA_COMMON_UMS_H */
diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h
index 129acf2..3b88a83 100644
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@ -19,6 +19,9 @@
#include <asm/arch/tegra.h> /* get chip and board defs */
+#define CONFIG_DM
+#define CONFIG_CMD_DM
+
#define CONFIG_SYS_TIMER_RATE 1000000
#define CONFIG_SYS_TIMER_COUNTER NV_PA_TMRUS_BASE
diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
index 128b66e..80976e7 100644
--- a/include/configs/ti_am335x_common.h
+++ b/include/configs/ti_am335x_common.h
@@ -75,6 +75,15 @@
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif
+/*
+ * When building U-Boot such that there is no previous loader
+ * we need to call board_early_init_f. This is taken care of in
+ * s_init when we have SPL used.
+ */
+#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL)
+#define CONFIG_BOARD_EARLY_INIT_F
+#endif
+
#ifdef CONFIG_NAND
#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */
#endif
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index 4854272..6e0bf09 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -127,7 +127,7 @@
* we are on so we do not need to rely on the command prompt. We set a
* console baudrate of 115200 and use the default baud rate table.
*/
-#define CONFIG_SYS_MALLOC_LEN (1024 << 10)
+#define CONFIG_SYS_MALLOC_LEN (16 << 20)
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT "U-Boot# "
#define CONFIG_SYS_CONSOLE_INFO_QUIET
@@ -196,7 +196,8 @@
* under common/spl/. Given our generally common memory map, we set a
* number of related defaults and sizes here.
*/
-#ifndef CONFIG_NOR_BOOT
+#if !defined(CONFIG_NOR_BOOT) && \
+ !(defined(CONFIG_QSPI_BOOT) && defined(CONFIG_AM43XX))
#define CONFIG_SPL
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_OS_BOOT
diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
index 44b3718..30b02f6 100644
--- a/include/configs/ti_omap4_common.h
+++ b/include/configs/ti_omap4_common.h
@@ -126,7 +126,7 @@
"if test $board_name = panda-es; then " \
"setenv fdtfile omap4-panda-es.dtb; fi;" \
"if test $board_name = duovero; then " \
- "setenv fdtfile omap4-duovero.dtb; fi;" \
+ "setenv fdtfile omap4-duovero-parlor.dtb; fi;" \
"if test $fdtfile = undefined; then " \
"echo WARNING: Could not determine device tree to use; fi; \0" \
"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
index a582fa4..cb928ab 100644
--- a/include/configs/ti_omap5_common.h
+++ b/include/configs/ti_omap5_common.h
@@ -67,6 +67,7 @@
#define PARTS_DEFAULT
#endif
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
"console=" CONSOLEDEV ",115200n8\0" \
@@ -116,6 +117,8 @@
"setenv fdtfile omap5-uevm.dtb; fi; " \
"if test $board_name = dra7xx; then " \
"setenv fdtfile dra7-evm.dtb; fi;" \
+ "if test $board_name = dra72x; then " \
+ "setenv fdtfile dra72-evm.dtb; fi;" \
"if test $fdtfile = undefined; then " \
"echo WARNING: Could not determine device tree to use; fi; \0" \
"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \
diff --git a/include/configs/tseries.h b/include/configs/tseries.h
index e550afa..1fd6e32 100644
--- a/include/configs/tseries.h
+++ b/include/configs/tseries.h
@@ -157,7 +157,6 @@
/* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
#define CONFIG_NAND_OMAP_ELM
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
-#define GPMC_NAND_ECC_LP_x16_LAYOUT 1
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
diff --git a/include/configs/v37.h b/include/configs/v37.h
deleted file mode 100644
index 0d01fe2..0000000
--- a/include/configs/v37.h
+++ /dev/null
@@ -1,375 +0,0 @@
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC823 1 /* This is a MPC823 CPU */
-#define CONFIG_V37 1 /* ...on a Marel V37 board */
-
-#define CONFIG_SYS_TEXT_BASE 0x40000000
-
-#define CONFIG_LCD
-#define CONFIG_MPC8XX_LCD
-#define CONFIG_SHARP_LQ084V1DG21
-#undef CONFIG_LCD_LOGO
-
-/*-----------------------------------------------------------------------------
- * I2C Configuration
- *-----------------------------------------------------------------------------
- */
-#define CONFIG_I2C 1
-#define CONFIG_SYS_I2C_SLAVE 0x2
-
-#define CONFIG_8xx_CONS_SMC1 1
-#undef CONFIG_8xx_CONS_SMC2 /* Console is on SMC2 */
-#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 9600 /* console baudrate = 115kbps */
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */
-#endif
-
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_BOOTCOMMAND \
- "tftpboot; " \
- "setenv bootargs console=tty0 " \
- "root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
- "bootm"
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-#define CONFIG_CAN_DRIVER 1 /* CAN Driver support enabled */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_DATE
-
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor1"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT "nor1=v37-1"
-#define MTDPARTS_DEFAULT "mtdparts=v37-1:-(jffs2)"
-*/
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xF0000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE0 0x40000000
-#define CONFIG_SYS_FLASH_BASE1 0x60000000
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH_BASE1
-
-#if defined(DEBUG)
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#else
-#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#endif
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE0
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 35 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_ENV_IS_IN_NVRAM 1
-#define CONFIG_ENV_ADDR 0x80000000/* Address of Environment */
-#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
-
-#define CONFIG_ENV_OFFSET 0
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR 0xFFFFFF88
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_FRC | SIUMCR_GB5E)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-/*%%%#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */
-#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-/*
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-*/
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
- */
-/* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_PLPRCR ( (1524 << PLPRCR_MF_SHIFT) | PLPRCR_SPLSS | PLPRCR_TMIST | PLPRCR_TEXPS )
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK SCCR_EBDF11
-/* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_TBS)
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
- *-----------------------------------------------------------------------
- */
-
-#undef CONFIG_IDE_PCCARD /* Use IDE with PC Card Adapter */
-
-#undef CONFIG_IDE_PCMCIA /* Direct IDE not supported */
-#undef CONFIG_IDE_LED /* LED for ide not supported */
-#undef CONFIG_IDE_RESET /* reset for ide not supported */
-
-#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR
-
-/* Offset for data I/O */
-#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for alternate registers */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0 and OR0 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
-#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #1 */
-
-#define CONFIG_SYS_PRELIM_OR_AM 0xFE000000 /* OR addr mask */
-
-#define CONFIG_SYS_OR_TIMING_FLASH 0xF56
-
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V)
-
-#define CONFIG_SYS_OR5_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR5_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V)
-
-/*
- * BR1 and OR1 (Battery backed SRAM)
- */
-#define CONFIG_SYS_BR1_PRELIM 0x80000401
-#define CONFIG_SYS_OR1_PRELIM 0xFFC00736
-
-/*
- * BR2 and OR2 (SDRAM)
- */
-#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM base */
-#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB */
-
-#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00
-
-#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
-#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-/* Marel V37 mem setting */
-
-#define CONFIG_SYS_BR3_CAN 0xC0000401
-#define CONFIG_SYS_OR3_CAN 0xFFFF0724
-
-/*
-#define CONFIG_SYS_BR3_PRELIM 0xFA400001
-#define CONFIG_SYS_OR3_PRELIM 0xFFFF8910
-#define CONFIG_SYS_BR4_PRELIM 0xFA000401
-#define CONFIG_SYS_OR4_PRELIM 0xFFFE0970
-*/
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* periodic timer for refresh */
-#define CONFIG_SYS_MAMR_PTA 97 /* start with divider for 100 MHz */
-
-/*
- * Refresh clock Prescalar
- */
-#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV16
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 10 column SDRAM */
-#define CONFIG_SYS_MAMR_10COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A12 | \
- MAMR_GPL_A4DIS | MAMR_RLFA_4X | MAMR_WLFA_3X | MAMR_TLFA_16X)
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/venice2.h b/include/configs/venice2.h
index 2d75f50..c4a1b94 100644
--- a/include/configs/venice2.h
+++ b/include/configs/venice2.h
@@ -63,6 +63,7 @@
/* USB Host support */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_USB_STORAGE
#define CONFIG_CMD_USB
@@ -74,6 +75,7 @@
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
+#include "tegra-common-ums.h"
#include "tegra-common-post.h"
#endif /* __CONFIG_H */
diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
index dff6adc..1905d13 100644
--- a/include/configs/vexpress_aemv8a.h
+++ b/include/configs/vexpress_aemv8a.h
@@ -10,9 +10,20 @@
#define DEBUG
+#ifdef CONFIG_BASE_FVP
+#ifndef CONFIG_SEMIHOSTING
+#error CONFIG_BASE_FVP requires CONFIG_SEMIHOSTING
+#endif
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_ARMV8_SWITCH_TO_EL1
+#endif
+
#define CONFIG_REMAKE_ELF
+#ifndef CONFIG_BASE_FVP
+/* Base FVP not using GICv3 yet */
#define CONFIG_GICV3
+#endif
/*#define CONFIG_ARMV8_SWITCH_TO_EL1*/
@@ -30,8 +41,14 @@
#define CONFIG_BOOTP_VCI_STRING "U-boot.armv8.vexpress_aemv8a"
/* Link Definitions */
+#ifdef CONFIG_BASE_FVP
+/* ATF loads u-boot here for BASE_FVP model */
+#define CONFIG_SYS_TEXT_BASE 0x88000000
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
+#else
#define CONFIG_SYS_TEXT_BASE 0x80000000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
+#endif
/* Flat Device Tree Definitions */
#define CONFIG_OF_LIBFDT
@@ -39,7 +56,11 @@
#define CONFIG_DEFAULT_DEVICE_TREE vexpress64
/* SMP Spin Table Definitions */
+#ifdef CONFIG_BASE_FVP
+#define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
+#else
#define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
+#endif
/* CS register bases for the original memory map. */
#define V2M_PA_CS0 0x00000000
@@ -99,9 +120,15 @@
#define GICD_BASE (0x2f000000)
#define GICR_BASE (0x2f100000)
#else
+
+#ifdef CONFIG_BASE_FVP
+#define GICD_BASE (0x2f000000)
+#define GICC_BASE (0x2c000000)
+#else
#define GICD_BASE (0x2C001000)
#define GICC_BASE (0x2C002000)
#endif
+#endif
#define CONFIG_SYS_MEMTEST_START V2M_BASE
#define CONFIG_SYS_MEMTEST_END (V2M_BASE + 0x80000000)
@@ -121,7 +148,6 @@
#define CONFIG_CONS_INDEX 0
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SYS_SERIAL0 V2M_UART0
#define CONFIG_SYS_SERIAL1 V2M_UART1
@@ -165,17 +191,41 @@
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
/* Initial environment variables */
+#ifdef CONFIG_BASE_FVP
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "kernel_name=uImage\0" \
+ "kernel_addr_r=0x80000000\0" \
+ "initrd_name=ramdisk.img\0" \
+ "initrd_addr_r=0x88000000\0" \
+ "fdt_name=devtree.dtb\0" \
+ "fdt_addr_r=0x83000000\0" \
+ "fdt_high=0xffffffffffffffff\0" \
+ "initrd_high=0xffffffffffffffff\0"
+
+#define CONFIG_BOOTARGS "console=ttyAMA0 earlyprintk=pl011,"\
+ "0x1c090000 debug user_debug=31 "\
+ "loglevel=9"
+
+#define CONFIG_BOOTCOMMAND "fdt addr $fdt_addr_r; fdt resize; " \
+ "fdt chosen $initrd_addr_r $initrd_end; " \
+ "bootm $kernel_addr_r - $fdt_addr_r"
+
+#define CONFIG_BOOTDELAY 1
+
+#else
+
#define CONFIG_EXTRA_ENV_SETTINGS \
- "kernel_addr=0x200000\0" \
- "initrd_addr=0xa00000\0" \
+ "kernel_addr_r=0x200000\0" \
+ "initrd_addr_r=0xa00000\0" \
"initrd_size=0x2000000\0" \
- "fdt_addr=0x100000\0" \
+ "fdt_addr_r=0x100000\0" \
"fdt_high=0xa0000000\0"
#define CONFIG_BOOTARGS "console=ttyAMA0 root=/dev/ram0"
-#define CONFIG_BOOTCOMMAND "bootm $kernel_addr " \
- "$initrd_addr:$initrd_size $fdt_addr"
+#define CONFIG_BOOTCOMMAND "bootm $kernel_addr_r " \
+ "$initrd_addr_r:$initrd_size $fdt_addr_r"
#define CONFIG_BOOTDELAY -1
+#endif
/* Do not preserve environment */
#define CONFIG_ENV_IS_NOWHERE 1
@@ -187,7 +237,6 @@
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING 1
diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index 500fd2f..0342550 100644
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -68,6 +68,18 @@
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
+/* QSPI Configs*/
+#define CONFIG_FSL_QSPI
+
+#ifdef CONFIG_FSL_QSPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SPANSION
+#define FSL_QSPI_FLASH_SIZE (1 << 24)
+#define FSL_QSPI_FLASH_NUM 2
+#define CONFIG_SYS_FSL_QSPI_LE
+#endif
+
/* I2C Configs */
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h
index 14c6e67..bef821f 100644
--- a/include/configs/vl_ma2sc.h
+++ b/include/configs/vl_ma2sc.h
@@ -13,8 +13,6 @@
/*--------------------------------------------------------------------------*/
-#define CONFIG_ARM926EJS /* This is an ARM926EJS Core */
-#define CONFIG_AT91FAMILY
#define CONFIG_AT91SAM9263 /* It's an Atmel AT91SAM9263 SoC*/
#define CONFIG_VL_MA2SC /* on an VL_MA2SC Board */
#define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h
index 695bc23..259205e 100644
--- a/include/configs/woodburn_common.h
+++ b/include/configs/woodburn_common.h
@@ -55,7 +55,7 @@
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_FSL
-#define CONFIG_PMIC_FSL_MC13892
+#define CONFIG_POWER_FSL_MC13892
#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8
#define CONFIG_RTC_MC13XXX
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index dc5bc22..fa252c0 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -225,6 +225,7 @@
/* FIT support */
#define CONFIG_FIT
#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
+#define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */
/* FDT support */
#define CONFIG_OF_CONTROL
diff --git a/include/dm-demo.h b/include/dm-demo.h
index 6e38d3c..a24fec6 100644
--- a/include/dm-demo.h
+++ b/include/dm-demo.h
@@ -23,14 +23,14 @@ struct dm_demo_pdata {
};
struct demo_ops {
- int (*hello)(struct device *dev, int ch);
- int (*status)(struct device *dev, int *status);
+ int (*hello)(struct udevice *dev, int ch);
+ int (*status)(struct udevice *dev, int *status);
};
-int demo_hello(struct device *dev, int ch);
-int demo_status(struct device *dev, int *status);
+int demo_hello(struct udevice *dev, int ch);
+int demo_status(struct udevice *dev, int *status);
int demo_list(void);
-int demo_parse_dt(struct device *dev);
+int demo_parse_dt(struct udevice *dev);
#endif
diff --git a/include/dm.h b/include/dm.h
index 8bbb21b..a179c8a 100644
--- a/include/dm.h
+++ b/include/dm.h
@@ -5,7 +5,7 @@
*/
#ifndef _DM_H_
-#define _DM_H
+#define _DM_H_
#include <dm/device.h>
#include <dm/platdata.h>
diff --git a/include/dm/device-internal.h b/include/dm/device-internal.h
index c026e8e..26e5cf5 100644
--- a/include/dm/device-internal.h
+++ b/include/dm/device-internal.h
@@ -11,7 +11,7 @@
#ifndef _DM_DEVICE_INTERNAL_H
#define _DM_DEVICE_INTERNAL_H
-struct device;
+struct udevice;
/**
* device_bind() - Create a device and bind it to a driver
@@ -34,9 +34,9 @@ struct device;
* @devp: Returns a pointer to the bound device
* @return 0 if OK, -ve on error
*/
-int device_bind(struct device *parent, struct driver *drv,
+int device_bind(struct udevice *parent, struct driver *drv,
const char *name, void *platdata, int of_offset,
- struct device **devp);
+ struct udevice **devp);
/**
* device_bind_by_name: Create a device and bind it to a driver
@@ -49,8 +49,8 @@ int device_bind(struct device *parent, struct driver *drv,
* @devp: Returns a pointer to the bound device
* @return 0 if OK, -ve on error
*/
-int device_bind_by_name(struct device *parent, const struct driver_info *info,
- struct device **devp);
+int device_bind_by_name(struct udevice *parent, const struct driver_info *info,
+ struct udevice **devp);
/**
* device_probe() - Probe a device, activating it
@@ -61,7 +61,7 @@ int device_bind_by_name(struct device *parent, const struct driver_info *info,
* @dev: Pointer to device to probe
* @return 0 if OK, -ve on error
*/
-int device_probe(struct device *dev);
+int device_probe(struct udevice *dev);
/**
* device_remove() - Remove a device, de-activating it
@@ -72,7 +72,7 @@ int device_probe(struct device *dev);
* @dev: Pointer to device to remove
* @return 0 if OK, -ve on error (an error here is normally a very bad thing)
*/
-int device_remove(struct device *dev);
+int device_remove(struct udevice *dev);
/**
* device_unbind() - Unbind a device, destroying it
@@ -82,6 +82,10 @@ int device_remove(struct device *dev);
* @dev: Pointer to device to unbind
* @return 0 if OK, -ve on error
*/
-int device_unbind(struct device *dev);
+int device_unbind(struct udevice *dev);
+
+/* Cast away any volatile pointer */
+#define DM_ROOT_NON_CONST (((gd_t *)gd)->dm_root)
+#define DM_UCLASS_ROOT_NON_CONST (((gd_t *)gd)->uclass_root)
#endif
diff --git a/include/dm/device.h b/include/dm/device.h
index 4cd38ed..ae75a3f 100644
--- a/include/dm/device.h
+++ b/include/dm/device.h
@@ -21,10 +21,10 @@ struct driver_info;
#define DM_FLAG_ACTIVATED (1 << 0)
/* DM is responsible for allocating and freeing platdata */
-#define DM_FLAG_ALLOC_PDATA (2 << 0)
+#define DM_FLAG_ALLOC_PDATA (1 << 1)
/**
- * struct device - An instance of a driver
+ * struct udevice - An instance of a driver
*
* This holds information about a device, which is a driver bound to a
* particular port or peripheral (essentially a driver instance).
@@ -53,12 +53,12 @@ struct driver_info;
* @sibling_node: Next device in list of all devices
* @flags: Flags for this device DM_FLAG_...
*/
-struct device {
+struct udevice {
struct driver *driver;
const char *name;
void *platdata;
int of_offset;
- struct device *parent;
+ struct udevice *parent;
void *priv;
struct uclass *uclass;
void *uclass_priv;
@@ -75,11 +75,11 @@ struct device {
#define device_active(dev) ((dev)->flags & DM_FLAG_ACTIVATED)
/**
- * struct device_id - Lists the compatible strings supported by a driver
+ * struct udevice_id - Lists the compatible strings supported by a driver
* @compatible: Compatible string
* @data: Data for this compatible string
*/
-struct device_id {
+struct udevice_id {
const char *compatible;
ulong data;
};
@@ -121,12 +121,12 @@ struct device_id {
struct driver {
char *name;
enum uclass_id id;
- const struct device_id *of_match;
- int (*bind)(struct device *dev);
- int (*probe)(struct device *dev);
- int (*remove)(struct device *dev);
- int (*unbind)(struct device *dev);
- int (*ofdata_to_platdata)(struct device *dev);
+ const struct udevice_id *of_match;
+ int (*bind)(struct udevice *dev);
+ int (*probe)(struct udevice *dev);
+ int (*remove)(struct udevice *dev);
+ int (*unbind)(struct udevice *dev);
+ int (*ofdata_to_platdata)(struct udevice *dev);
int priv_auto_alloc_size;
int platdata_auto_alloc_size;
const void *ops; /* driver-specific operations */
@@ -144,7 +144,7 @@ struct driver {
* @dev Device to check
* @return platform data, or NULL if none
*/
-void *dev_get_platdata(struct device *dev);
+void *dev_get_platdata(struct udevice *dev);
/**
* dev_get_priv() - Get the private data for a device
@@ -154,6 +154,6 @@ void *dev_get_platdata(struct device *dev);
* @dev Device to check
* @return private data, or NULL if none
*/
-void *dev_get_priv(struct device *dev);
+void *dev_get_priv(struct udevice *dev);
#endif
diff --git a/include/dm/lists.h b/include/dm/lists.h
index 0d09f9a..49d87e6 100644
--- a/include/dm/lists.h
+++ b/include/dm/lists.h
@@ -32,8 +32,28 @@ struct driver *lists_driver_lookup_name(const char *name);
*/
struct uclass_driver *lists_uclass_lookup(enum uclass_id id);
-int lists_bind_drivers(struct device *parent);
+/**
+ * lists_bind_drivers() - search for and bind all drivers to parent
+ *
+ * This searches the U_BOOT_DEVICE() structures and creates new devices for
+ * each one. The devices will have @parent as their parent.
+ *
+ * @parent: parent driver (root)
+ * @early_only: If true, bind only drivers with the DM_INIT_F flag. If false
+ * bind all drivers.
+ */
+int lists_bind_drivers(struct udevice *parent);
-int lists_bind_fdt(struct device *parent, const void *blob, int offset);
+/**
+ * lists_bind_fdt() - bind a device tree node
+ *
+ * This creates a new device bound to the given device tree node, with
+ * @parent as its parent.
+ *
+ * @parent: parent driver (root)
+ * @blob: device tree blob
+ * @offset: offset of this device tree node
+ */
+int lists_bind_fdt(struct udevice *parent, const void *blob, int offset);
#endif
diff --git a/include/dm/root.h b/include/dm/root.h
index 0ebccda..a4826a6 100644
--- a/include/dm/root.h
+++ b/include/dm/root.h
@@ -10,7 +10,7 @@
#ifndef _DM_ROOT_H_
#define _DM_ROOT_H_
-struct device;
+struct udevice;
/**
* dm_root() - Return pointer to the top of the driver tree
@@ -19,7 +19,7 @@ struct device;
*
* @return pointer to root device, or NULL if not inited yet
*/
-struct device *dm_root(void);
+struct udevice *dm_root(void);
/**
* dm_scan_platdata() - Scan all platform data and bind drivers
@@ -41,7 +41,7 @@ int dm_scan_platdata(void);
int dm_scan_fdt(const void *blob);
/**
- * dm_init() - Initialize Driver Model structures
+ * dm_init() - Initialise Driver Model structures
*
* This function will initialize roots of driver tree and class tree.
* This needs to be called before anything uses the DM
diff --git a/include/dm/test.h b/include/dm/test.h
index eeaa2eb..409f1a3 100644
--- a/include/dm/test.h
+++ b/include/dm/test.h
@@ -30,7 +30,7 @@ struct dm_test_pdata {
* @return 0 if OK, -ve on error
*/
struct test_ops {
- int (*ping)(struct device *dev, int pingval, int *pingret);
+ int (*ping)(struct udevice *dev, int pingval, int *pingret);
};
/* Operations that our test driver supports */
@@ -102,8 +102,8 @@ extern struct dm_test_state global_test_state;
* @skip_post_probe: Skip uclass post-probe processing
*/
struct dm_test_state {
- struct device *root;
- struct device *testdev;
+ struct udevice *root;
+ struct udevice *testdev;
int fail_count;
int force_fail_alloc;
int skip_post_probe;
@@ -138,8 +138,8 @@ struct dm_test {
}
/* Declare ping methods for the drivers */
-int test_ping(struct device *dev, int pingval, int *pingret);
-int testfdt_ping(struct device *dev, int pingval, int *pingret);
+int test_ping(struct udevice *dev, int pingval, int *pingret);
+int testfdt_ping(struct udevice *dev, int pingval, int *pingret);
/**
* dm_check_operations() - Check that we can perform ping operations
@@ -152,7 +152,7 @@ int testfdt_ping(struct device *dev, int pingval, int *pingret);
* @priv: Pointer to private test information
* @return 0 if OK, -ve on error
*/
-int dm_check_operations(struct dm_test_state *dms, struct device *dev,
+int dm_check_operations(struct dm_test_state *dms, struct udevice *dev,
uint32_t base, struct dm_test_priv *priv);
/**
diff --git a/include/dm/uclass-internal.h b/include/dm/uclass-internal.h
index cc65d52..1434db3 100644
--- a/include/dm/uclass-internal.h
+++ b/include/dm/uclass-internal.h
@@ -21,7 +21,7 @@
* @return the uclass pointer of a child at the given index or
* return NULL on error.
*/
-int uclass_find_device(enum uclass_id id, int index, struct device **devp);
+int uclass_find_device(enum uclass_id id, int index, struct udevice **devp);
/**
* uclass_bind_device() - Associate device with a uclass
@@ -31,7 +31,7 @@ int uclass_find_device(enum uclass_id id, int index, struct device **devp);
* @dev: Pointer to the device
* #return 0 on success, -ve on error
*/
-int uclass_bind_device(struct device *dev);
+int uclass_bind_device(struct udevice *dev);
/**
* uclass_unbind_device() - Deassociate device with a uclass
@@ -41,7 +41,7 @@ int uclass_bind_device(struct device *dev);
* @dev: Pointer to the device
* #return 0 on success, -ve on error
*/
-int uclass_unbind_device(struct device *dev);
+int uclass_unbind_device(struct udevice *dev);
/**
* uclass_post_probe_device() - Deal with a device that has just been probed
@@ -52,7 +52,7 @@ int uclass_unbind_device(struct device *dev);
* @dev: Pointer to the device
* #return 0 on success, -ve on error
*/
-int uclass_post_probe_device(struct device *dev);
+int uclass_post_probe_device(struct udevice *dev);
/**
* uclass_pre_remove_device() - Handle a device which is about to be removed
@@ -62,7 +62,7 @@ int uclass_post_probe_device(struct device *dev);
* @dev: Pointer to the device
* #return 0 on success, -ve on error
*/
-int uclass_pre_remove_device(struct device *dev);
+int uclass_pre_remove_device(struct udevice *dev);
/**
* uclass_find() - Find uclass by its id
diff --git a/include/dm/uclass.h b/include/dm/uclass.h
index cd23cfe..afd9923 100644
--- a/include/dm/uclass.h
+++ b/include/dm/uclass.h
@@ -26,7 +26,7 @@
* @priv: Private data for this uclass
* @uc_drv: The driver for the uclass itself, not to be confused with a
* 'struct driver'
- * dev_head: List of devices in this uclass (devices are attached to their
+ * @dev_head: List of devices in this uclass (devices are attached to their
* uclass when their bind method is called)
* @sibling_node: Next uclass in the linked list of uclasses
*/
@@ -37,7 +37,7 @@ struct uclass {
struct list_head sibling_node;
};
-struct device;
+struct udevice;
/**
* struct uclass_driver - Driver for the uclass
@@ -65,10 +65,10 @@ struct device;
struct uclass_driver {
const char *name;
enum uclass_id id;
- int (*post_bind)(struct device *dev);
- int (*pre_unbind)(struct device *dev);
- int (*post_probe)(struct device *dev);
- int (*pre_remove)(struct device *dev);
+ int (*post_bind)(struct udevice *dev);
+ int (*pre_unbind)(struct udevice *dev);
+ int (*post_probe)(struct udevice *dev);
+ int (*pre_remove)(struct udevice *dev);
int (*init)(struct uclass *class);
int (*destroy)(struct uclass *class);
int priv_auto_alloc_size;
@@ -96,12 +96,14 @@ int uclass_get(enum uclass_id key, struct uclass **ucp);
/**
* uclass_get_device() - Get a uclass device based on an ID and index
*
+ * The device is probed to activate it ready for use.
+ *
* id: ID to look up
* @index: Device number within that uclass (0=first)
- * @ucp: Returns pointer to uclass (there is only one per for each ID)
+ * @devp: Returns pointer to device (there is only one per for each ID)
* @return 0 if OK, -ve on error
*/
-int uclass_get_device(enum uclass_id id, int index, struct device **ucp);
+int uclass_get_device(enum uclass_id id, int index, struct udevice **devp);
/**
* uclass_first_device() - Get the first device in a uclass
@@ -110,7 +112,7 @@ int uclass_get_device(enum uclass_id id, int index, struct device **ucp);
* @devp: Returns pointer to the first device in that uclass, or NULL if none
* @return 0 if OK (found or not found), -1 on error
*/
-int uclass_first_device(enum uclass_id id, struct device **devp);
+int uclass_first_device(enum uclass_id id, struct udevice **devp);
/**
* uclass_next_device() - Get the next device in a uclass
@@ -119,7 +121,7 @@ int uclass_first_device(enum uclass_id id, struct device **devp);
* to the next device in the same uclass, or NULL if none
* @return 0 if OK (found or not found), -1 on error
*/
-int uclass_next_device(struct device **devp);
+int uclass_next_device(struct udevice **devp);
/**
* uclass_foreach_dev() - Helper function to iteration through devices
@@ -127,9 +129,9 @@ int uclass_next_device(struct device **devp);
* This creates a for() loop which works through the available devices in
* a uclass in order from start to end.
*
- * @pos: struct device * to hold the current device. Set to NULL when there
+ * @pos: struct udevice * to hold the current device. Set to NULL when there
* are no more devices.
- * uc: uclass to scan
+ * @uc: uclass to scan
*/
#define uclass_foreach_dev(pos, uc) \
for (pos = list_entry((&(uc)->dev_head)->next, typeof(*pos), \
diff --git a/include/dt-bindings/gpio/gpio.h b/include/dt-bindings/gpio/gpio.h
new file mode 100644
index 0000000..e6b1e0a
--- /dev/null
+++ b/include/dt-bindings/gpio/gpio.h
@@ -0,0 +1,15 @@
+/*
+ * This header provides constants for most GPIO bindings.
+ *
+ * Most GPIO bindings include a flags cell as part of the GPIO specifier.
+ * In most cases, the format of the flags cell uses the standard values
+ * defined in this header.
+ */
+
+#ifndef _DT_BINDINGS_GPIO_GPIO_H
+#define _DT_BINDINGS_GPIO_GPIO_H
+
+#define GPIO_ACTIVE_HIGH 0
+#define GPIO_ACTIVE_LOW 1
+
+#endif
diff --git a/include/dt-bindings/gpio/tegra-gpio.h b/include/dt-bindings/gpio/tegra-gpio.h
new file mode 100644
index 0000000..197dc28
--- /dev/null
+++ b/include/dt-bindings/gpio/tegra-gpio.h
@@ -0,0 +1,51 @@
+/*
+ * This header provides constants for binding nvidia,tegra*-gpio.
+ *
+ * The first cell in Tegra's GPIO specifier is the GPIO ID. The macros below
+ * provide names for this.
+ *
+ * The second cell contains standard flag values specified in gpio.h.
+ */
+
+#ifndef _DT_BINDINGS_GPIO_TEGRA_GPIO_H
+#define _DT_BINDINGS_GPIO_TEGRA_GPIO_H
+
+#include <dt-bindings/gpio/gpio.h>
+
+#define TEGRA_GPIO_BANK_ID_A 0
+#define TEGRA_GPIO_BANK_ID_B 1
+#define TEGRA_GPIO_BANK_ID_C 2
+#define TEGRA_GPIO_BANK_ID_D 3
+#define TEGRA_GPIO_BANK_ID_E 4
+#define TEGRA_GPIO_BANK_ID_F 5
+#define TEGRA_GPIO_BANK_ID_G 6
+#define TEGRA_GPIO_BANK_ID_H 7
+#define TEGRA_GPIO_BANK_ID_I 8
+#define TEGRA_GPIO_BANK_ID_J 9
+#define TEGRA_GPIO_BANK_ID_K 10
+#define TEGRA_GPIO_BANK_ID_L 11
+#define TEGRA_GPIO_BANK_ID_M 12
+#define TEGRA_GPIO_BANK_ID_N 13
+#define TEGRA_GPIO_BANK_ID_O 14
+#define TEGRA_GPIO_BANK_ID_P 15
+#define TEGRA_GPIO_BANK_ID_Q 16
+#define TEGRA_GPIO_BANK_ID_R 17
+#define TEGRA_GPIO_BANK_ID_S 18
+#define TEGRA_GPIO_BANK_ID_T 19
+#define TEGRA_GPIO_BANK_ID_U 20
+#define TEGRA_GPIO_BANK_ID_V 21
+#define TEGRA_GPIO_BANK_ID_W 22
+#define TEGRA_GPIO_BANK_ID_X 23
+#define TEGRA_GPIO_BANK_ID_Y 24
+#define TEGRA_GPIO_BANK_ID_Z 25
+#define TEGRA_GPIO_BANK_ID_AA 26
+#define TEGRA_GPIO_BANK_ID_BB 27
+#define TEGRA_GPIO_BANK_ID_CC 28
+#define TEGRA_GPIO_BANK_ID_DD 29
+#define TEGRA_GPIO_BANK_ID_EE 30
+#define TEGRA_GPIO_BANK_ID_FF 31
+
+#define TEGRA_GPIO(bank, offset) \
+ ((TEGRA_GPIO_BANK_ID_##bank * 8) + offset)
+
+#endif
diff --git a/include/dt-bindings/interrupt-controller/arm-gic.h b/include/dt-bindings/interrupt-controller/arm-gic.h
new file mode 100644
index 0000000..1ea1b70
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/arm-gic.h
@@ -0,0 +1,22 @@
+/*
+ * This header provides constants for the ARM GIC.
+ */
+
+#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_ARM_GIC_H
+#define _DT_BINDINGS_INTERRUPT_CONTROLLER_ARM_GIC_H
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/* interrupt specific cell 0 */
+
+#define GIC_SPI 0
+#define GIC_PPI 1
+
+/*
+ * Interrupt specifier cell 2.
+ * The flaggs in irq.h are valid, plus those below.
+ */
+#define GIC_CPU_MASK_RAW(x) ((x) << 8)
+#define GIC_CPU_MASK_SIMPLE(num) GIC_CPU_MASK_RAW((1 << (num)) - 1)
+
+#endif
diff --git a/include/dt-bindings/interrupt-controller/irq.h b/include/dt-bindings/interrupt-controller/irq.h
new file mode 100644
index 0000000..33a1003
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/irq.h
@@ -0,0 +1,19 @@
+/*
+ * This header provides constants for most IRQ bindings.
+ *
+ * Most IRQ bindings include a flags cell as part of the IRQ specifier.
+ * In most cases, the format of the flags cell uses the standard values
+ * defined in this header.
+ */
+
+#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_IRQ_H
+#define _DT_BINDINGS_INTERRUPT_CONTROLLER_IRQ_H
+
+#define IRQ_TYPE_NONE 0
+#define IRQ_TYPE_EDGE_RISING 1
+#define IRQ_TYPE_EDGE_FALLING 2
+#define IRQ_TYPE_EDGE_BOTH (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)
+#define IRQ_TYPE_LEVEL_HIGH 4
+#define IRQ_TYPE_LEVEL_LOW 8
+
+#endif
diff --git a/include/dwmmc.h b/include/dwmmc.h
index c9bdf51..b67f11b 100644
--- a/include/dwmmc.h
+++ b/include/dwmmc.h
@@ -123,6 +123,9 @@
#define DWMCI_BMOD_IDMAC_FB (1 << 1)
#define DWMCI_BMOD_IDMAC_EN (1 << 7)
+/* UHS register */
+#define DWMCI_DDR_MODE (1 << 16)
+
/* quirks */
#define DWMCI_QUIRK_DISABLE_SMU (1 << 0)
@@ -134,7 +137,9 @@ struct dwmci_host {
unsigned int version;
unsigned int clock;
unsigned int bus_hz;
+ unsigned int div;
int dev_index;
+ int dev_id;
int buswidth;
u32 clksel_val;
u32 fifoth_val;
diff --git a/include/fat.h b/include/fat.h
index 81d9790..63cf787 100644
--- a/include/fat.h
+++ b/include/fat.h
@@ -18,7 +18,11 @@
#define VFAT_MAXSEQ 9 /* Up to 9 of 13 2-byte UTF-16 entries */
#define PREFETCH_BLOCKS 2
-#define MAX_CLUSTSIZE 65536
+#ifndef CONFIG_FS_FAT_MAX_CLUSTSIZE
+#define CONFIG_FS_FAT_MAX_CLUSTSIZE 65536
+#endif
+#define MAX_CLUSTSIZE CONFIG_FS_FAT_MAX_CLUSTSIZE
+
#define DIRENTSPERBLOCK (mydata->sect_size / sizeof(dir_entry))
#define DIRENTSPERCLUST ((mydata->clust_size * mydata->sect_size) / \
sizeof(dir_entry))
diff --git a/include/fdt_support.h b/include/fdt_support.h
index ae010bb..fd44d7e 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -16,8 +16,8 @@ u32 fdt_getprop_u32_default_node(const void *fdt, int off, int cell,
const char *prop, const u32 dflt);
u32 fdt_getprop_u32_default(const void *fdt, const char *path,
const char *prop, const u32 dflt);
-int fdt_chosen(void *fdt, int force);
-int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force);
+int fdt_chosen(void *fdt);
+int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end);
void do_fixup_by_path(void *fdt, const char *path, const char *prop,
const void *val, int len, int create);
void do_fixup_by_path_u32(void *fdt, const char *path, const char *prop,
@@ -113,17 +113,25 @@ static inline int fdt_status_disabled(void *fdt, int nodeoffset)
{
return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_DISABLED, 0);
}
+static inline int fdt_status_fail(void *fdt, int nodeoffset)
+{
+ return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_FAIL, 0);
+}
-int fdt_set_status_by_alias(void *fdt, const char* alias,
+int fdt_set_status_by_alias(void *fdt, const char *alias,
enum fdt_status status, unsigned int error_code);
-static inline int fdt_status_okay_by_alias(void *fdt, const char* alias)
+static inline int fdt_status_okay_by_alias(void *fdt, const char *alias)
{
return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_OKAY, 0);
}
-static inline int fdt_status_disabled_by_alias(void *fdt, const char* alias)
+static inline int fdt_status_disabled_by_alias(void *fdt, const char *alias)
{
return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_DISABLED, 0);
}
+static inline int fdt_status_fail_by_alias(void *fdt, const char *alias)
+{
+ return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_FAIL, 0);
+}
#endif /* ifdef CONFIG_OF_LIBFDT */
diff --git a/include/fdtdec.h b/include/fdtdec.h
index 3196cf6..a7e6ee7 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -81,7 +81,7 @@ enum fdt_compat_id {
COMPAT_SAMSUNG_EXYNOS_FIMD, /* Exynos Display controller */
COMPAT_SAMSUNG_EXYNOS_MIPI_DSI, /* Exynos mipi dsi */
COMPAT_SAMSUNG_EXYNOS5_DP, /* Exynos Display port controller */
- COMPAT_SAMSUNG_EXYNOS5_DWMMC, /* Exynos5 DWMMC controller */
+ COMPAT_SAMSUNG_EXYNOS_DWMMC, /* Exynos DWMMC controller */
COMPAT_SAMSUNG_EXYNOS_MMC, /* Exynos MMC controller */
COMPAT_SAMSUNG_EXYNOS_SERIAL, /* Exynos UART */
COMPAT_MAXIM_MAX77686_PMIC, /* MAX77686 PMIC */
@@ -92,6 +92,8 @@ enum fdt_compat_id {
COMPAT_SAMSUNG_EXYNOS5_I2C, /* Exynos5 High Speed I2C Controller */
COMPAT_SANDBOX_HOST_EMULATION, /* Sandbox emulation of a function */
COMPAT_SANDBOX_LCD_SDL, /* Sandbox LCD emulation with SDL */
+ COMPAT_TI_TPS65090, /* Texas Instrument TPS65090 */
+ COMPAT_NXP_PTN3460, /* NXP PTN3460 DP/LVDS bridge */
COMPAT_COUNT,
};
diff --git a/include/fsl_mc.h b/include/fsl_mc.h
new file mode 100644
index 0000000..b9f089e
--- /dev/null
+++ b/include/fsl_mc.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __FSL_MC_H__
+#define __FSL_MC_H__
+
+#include <common.h>
+
+#define MC_CCSR_BASE_ADDR \
+ ((struct mc_ccsr_registers __iomem *)0x8340000)
+
+#define BIT(x) (1 << (x))
+#define GCR1_P1_STOP BIT(31)
+#define GCR1_P2_STOP BIT(30)
+#define GCR1_P1_DE_RST BIT(23)
+#define GCR1_P2_DE_RST BIT(22)
+#define GCR1_M1_DE_RST BIT(15)
+#define GCR1_M2_DE_RST BIT(14)
+#define GCR1_M_ALL_DE_RST (GCR1_M1_DE_RST | GCR1_M2_DE_RST)
+#define GSR_FS_MASK 0x3fffffff
+#define MCFAPR_PL_MASK (0x1 << 18)
+#define MCFAPR_BMT_MASK (0x1 << 17)
+#define MCFAPR_BYPASS_ICID_MASK \
+ (MCFAPR_PL_MASK | MCFAPR_BMT_MASK)
+
+#define SOC_MC_PORTALS_BASE_ADDR ((void __iomem *)0x00080C000000)
+#define SOC_MC_PORTAL_STRIDE 0x10000
+
+#define SOC_MC_PORTAL_ADDR(_portal_id) \
+ ((void __iomem *)((uintptr_t)SOC_MC_PORTALS_BASE_ADDR + \
+ (_portal_id) * SOC_MC_PORTAL_STRIDE))
+
+struct mc_ccsr_registers {
+ u32 reg_gcr1;
+ u32 reserved1;
+ u32 reg_gsr;
+ u32 reserved2;
+ u32 reg_sicbalr;
+ u32 reg_sicbahr;
+ u32 reg_sicapr;
+ u32 reserved3;
+ u32 reg_mcfbalr;
+ u32 reg_mcfbahr;
+ u32 reg_mcfapr;
+ u32 reserved4[0x2f1];
+ u32 reg_psr;
+ u32 reserved5;
+ u32 reg_brr[2];
+ u32 reserved6[0x80];
+ u32 reg_error[];
+};
+
+int mc_init(bd_t *bis);
+
+int get_mc_boot_status(void);
+#endif
diff --git a/include/gdsys_fpga.h b/include/gdsys_fpga.h
index 85ddbcb..276a01e 100644
--- a/include/gdsys_fpga.h
+++ b/include/gdsys_fpga.h
@@ -43,10 +43,12 @@ struct ihs_gpio {
};
struct ihs_i2c {
- u16 write_mailbox;
+ u16 interrupt_status;
+ u16 interrupt_enable;
u16 write_mailbox_ext;
- u16 read_mailbox;
+ u16 write_mailbox;
u16 read_mailbox_ext;
+ u16 read_mailbox;
};
struct ihs_osd {
@@ -84,7 +86,6 @@ struct ihs_fpga {
#endif
#ifdef CONFIG_IO64
-
struct ihs_fpga_channel {
u16 status_int;
u16 config_int;
@@ -121,9 +122,9 @@ struct ihs_fpga {
u16 reserved_0[6]; /* 0x0008 */
struct ihs_gpio gpio; /* 0x0014 */
u16 mpc3w_control; /* 0x001a */
- u16 reserved_1[19]; /* 0x001c */
- u16 videocontrol; /* 0x0042 */
- u16 reserved_2[14]; /* 0x0044 */
+ u16 reserved_1[18]; /* 0x001c */
+ struct ihs_i2c i2c; /* 0x0040 */
+ u16 reserved_2[10]; /* 0x004c */
u16 mc_int; /* 0x0060 */
u16 mc_int_en; /* 0x0062 */
u16 mc_status; /* 0x0064 */
@@ -150,15 +151,13 @@ struct ihs_fpga {
u16 fpga_features; /* 0x0006 */
u16 reserved_0[10]; /* 0x0008 */
u16 extended_interrupt; /* 0x001c */
- u16 reserved_1[9]; /* 0x001e */
- struct ihs_i2c i2c; /* 0x0030 */
- u16 reserved_2[16]; /* 0x0038 */
+ u16 reserved_1[29]; /* 0x001e */
u16 mpc3w_control; /* 0x0058 */
- u16 reserved_3[34]; /* 0x005a */
- u16 videocontrol; /* 0x009e */
- u16 reserved_4[176]; /* 0x00a0 */
+ u16 reserved_2[3]; /* 0x005a */
+ struct ihs_i2c i2c; /* 0x0060 */
+ u16 reserved_3[205]; /* 0x0066 */
struct ihs_osd osd; /* 0x0200 */
- u16 reserved_5[761]; /* 0x020e */
+ u16 reserved_4[761]; /* 0x020e */
u16 videomem[31736]; /* 0x0800 */
};
#endif
diff --git a/include/hash.h b/include/hash.h
index dc21678..d8ec4f0 100644
--- a/include/hash.h
+++ b/include/hash.h
@@ -6,6 +6,18 @@
#ifndef _HASH_H
#define _HASH_H
+/*
+ * Maximum digest size for all algorithms we support. Having this value
+ * avoids a malloc() or C99 local declaration in common/cmd_hash.c.
+ */
+#define HASH_MAX_DIGEST_SIZE 32
+
+enum {
+ HASH_FLAG_VERIFY = 1 << 0, /* Enable verify mode */
+ HASH_FLAG_ENV = 1 << 1, /* Allow env vars */
+};
+
+#ifndef USE_HOSTCC
#if defined(CONFIG_SHA1SUM_VERIFY) || defined(CONFIG_CRC32_VERIFY)
#define CONFIG_HASH_VERIFY
#endif
@@ -65,17 +77,6 @@ struct hash_algo {
int size);
};
-/*
- * Maximum digest size for all algorithms we support. Having this value
- * avoids a malloc() or C99 local declaration in common/cmd_hash.c.
- */
-#define HASH_MAX_DIGEST_SIZE 32
-
-enum {
- HASH_FLAG_VERIFY = 1 << 0, /* Enable verify mode */
- HASH_FLAG_ENV = 1 << 1, /* Allow env vars */
-};
-
/**
* hash_command: Process a hash command for a particular algorithm
*
@@ -125,4 +126,20 @@ int hash_block(const char *algo_name, const void *data, unsigned int len,
* @return 0 if ok, -EPROTONOSUPPORT for an unknown algorithm.
*/
int hash_lookup_algo(const char *algo_name, struct hash_algo **algop);
+
+/**
+ * hash_show() - Print out a hash algorithm and value
+ *
+ * You will get a message like this (without a newline at the end):
+ *
+ * "sha1 for 9eb3337c ... 9eb3338f ==> 7942ef1df479fd3130f716eb9613d107dab7e257"
+ *
+ * @algo: Algorithm used for hash
+ * @addr: Address of data that was hashed
+ * @len: Length of data that was hashed
+ * @output: Hash value to display
+ */
+void hash_show(struct hash_algo *algo, ulong addr, ulong len,
+ uint8_t *output);
+#endif /* !USE_HOSTCC */
#endif
diff --git a/include/image.h b/include/image.h
index 1886168..3e8f78d 100644
--- a/include/image.h
+++ b/include/image.h
@@ -45,6 +45,7 @@ struct lmb;
#endif /* USE_HOSTCC */
#if defined(CONFIG_FIT)
+#include <hash.h>
#include <libfdt.h>
#include <fdt_support.h>
# ifdef CONFIG_SPL_BUILD
@@ -71,6 +72,11 @@ struct lmb;
# define IMAGE_ENABLE_SHA256 1
# endif
+#ifdef CONFIG_FIT_DISABLE_SHA256
+#undef CONFIG_SHA256
+#undef IMAGE_ENABLE_SHA256
+#endif
+
#ifndef IMAGE_ENABLE_CRC32
#define IMAGE_ENABLE_CRC32 0
#endif
@@ -225,6 +231,7 @@ struct lmb;
#define IH_TYPE_PBLIMAGE 15 /* Freescale PBL Boot Image */
#define IH_TYPE_MXSIMAGE 16 /* Freescale MXSBoot Image */
#define IH_TYPE_GPIMAGE 17 /* TI Keystone GPHeader Image */
+#define IH_TYPE_ATMELIMAGE 18 /* ATMEL ROM bootable Image */
/*
* Compression Types
@@ -411,7 +418,9 @@ enum fit_load_op {
#ifndef USE_HOSTCC
/* Image format types, returned by _get_format() routine */
#define IMAGE_FORMAT_INVALID 0x00
+#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
#define IMAGE_FORMAT_LEGACY 0x01 /* legacy image_header based format */
+#endif
#define IMAGE_FORMAT_FIT 0x02 /* new, libfdt based format */
#define IMAGE_FORMAT_ANDROID 0x03 /* Android boot image */
@@ -421,6 +430,7 @@ ulong genimg_get_image(ulong img_addr);
int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,
uint8_t arch, ulong *rd_start, ulong *rd_end);
+#endif
/**
* fit_image_load() - load an image from a FIT
@@ -430,8 +440,9 @@ int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,
* out progress messages, checking the type/arch/os and optionally copying it
* to the right load address.
*
+ * The property to look up is defined by image_type.
+ *
* @param images Boot images structure
- * @param prop_name Property name to look up (FIT_..._PROP)
* @param addr Address of FIT in memory
* @param fit_unamep On entry this is the requested image name
* (e.g. "kernel@1") or NULL to use the default. On exit
@@ -449,12 +460,14 @@ int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,
* @param load_op Decribes what to do with the load address
* @param datap Returns address of loaded image
* @param lenp Returns length of loaded image
+ * @return node offset of image, or -ve error code on error
*/
-int fit_image_load(bootm_headers_t *images, const char *prop_name, ulong addr,
+int fit_image_load(bootm_headers_t *images, ulong addr,
const char **fit_unamep, const char **fit_uname_configp,
int arch, int image_type, int bootstage_id,
enum fit_load_op load_op, ulong *datap, ulong *lenp);
+#ifndef USE_HOSTCC
/**
* fit_get_node_from_config() - Look up an image a FIT by type
*
@@ -599,8 +612,8 @@ int image_check_dcrc(const image_header_t *hdr);
ulong getenv_bootm_low(void);
phys_size_t getenv_bootm_size(void);
phys_size_t getenv_bootm_mapsize(void);
-void memmove_wd(void *to, void *from, size_t len, ulong chunksz);
#endif
+void memmove_wd(void *to, void *from, size_t len, ulong chunksz);
static inline int image_check_magic(const image_header_t *hdr)
{
@@ -703,7 +716,7 @@ int bootz_setup(ulong image, ulong *start, ulong *end);
#define FIT_FDT_PROP "fdt"
#define FIT_DEFAULT_PROP "default"
-#define FIT_MAX_HASH_LEN 20 /* max(crc32_len(4), sha1_len(20)) */
+#define FIT_MAX_HASH_LEN HASH_MAX_DIGEST_SIZE
/* cmdline argument format parsing */
int fit_parse_conf(const char *spec, ulong addr_curr,
@@ -878,7 +891,7 @@ struct image_region {
};
#if IMAGE_ENABLE_VERIFY
-# include <rsa-checksum.h>
+# include <u-boot/rsa-checksum.h>
#endif
struct checksum_algo {
const char *name;
diff --git a/include/initcall.h b/include/initcall.h
index 2378077..65f67dc 100644
--- a/include/initcall.h
+++ b/include/initcall.h
@@ -6,4 +6,4 @@
typedef int (*init_fnc_t)(void);
-int initcall_run_list(init_fnc_t init_sequence[]);
+int initcall_run_list(const init_fnc_t init_sequence[]);
diff --git a/include/iotrace.h b/include/iotrace.h
new file mode 100644
index 0000000..9bd1f16
--- /dev/null
+++ b/include/iotrace.h
@@ -0,0 +1,104 @@
+/*
+ * Copyright (c) 2014 Google, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __IOTRACE_H
+#define __IOTRACE_H
+
+#include <linux/types.h>
+
+/*
+ * This file is designed to be included in arch/<arch>/include/asm/io.h.
+ * It redirects all IO access through a tracing/checksumming feature for
+ * testing purposes.
+ */
+
+#if defined(CONFIG_IO_TRACE) && !defined(IOTRACE_IMPL) && \
+ !defined(CONFIG_SPL_BUILD)
+
+#undef readl
+#define readl(addr) iotrace_readl((const void *)(addr))
+
+#undef writel
+#define writel(val, addr) iotrace_writel(val, (const void *)(addr))
+
+#undef readw
+#define readw(addr) iotrace_readw((const void *)(addr))
+
+#undef writew
+#define writew(val, addr) iotrace_writew(val, (const void *)(addr))
+
+#undef readb
+#define readb(addr) iotrace_readb((const void *)(addr))
+
+#undef writeb
+#define writeb(val, addr) iotrace_writeb(val, (const void *)(addr))
+
+#endif
+
+/* Tracing functions which mirror their io.h counterparts */
+u32 iotrace_readl(const void *ptr);
+void iotrace_writel(ulong value, const void *ptr);
+u16 iotrace_readw(const void *ptr);
+void iotrace_writew(ulong value, const void *ptr);
+u8 iotrace_readb(const void *ptr);
+void iotrace_writeb(ulong value, const void *ptr);
+
+/**
+ * iotrace_reset_checksum() - Reset the iotrace checksum
+ */
+void iotrace_reset_checksum(void);
+
+/**
+ * iotrace_get_checksum() - Get the current checksum value
+ *
+ * @return currect checksum value
+ */
+u32 iotrace_get_checksum(void);
+
+/**
+ * iotrace_set_enabled() - Set whether iotracing is enabled or not
+ *
+ * This controls whether the checksum is updated and a trace record added
+ * for each I/O access.
+ *
+ * @enable: true to enable iotracing, false to disable
+ */
+void iotrace_set_enabled(int enable);
+
+/**
+ * iotrace_get_enabled() - Get whether iotracing is enabled or not
+ *
+ * @return true if enabled, false if disabled
+ */
+int iotrace_get_enabled(void);
+
+/**
+ * iotrace_set_buffer() - Set position and size of iotrace buffer
+ *
+ * Defines where the iotrace buffer goes, and resets the output pointer to
+ * the start of the buffer.
+ *
+ * The buffer can be 0 size in which case the checksum is updated but no
+ * trace records are writen. If the buffer is exhausted, the offset will
+ * continue to increase but not new data will be written.
+ *
+ * @start: Start address of buffer
+ * @size: Size of buffer in bytes
+ */
+void iotrace_set_buffer(ulong start, ulong size);
+
+/**
+ * iotrace_get_buffer() - Get buffer information
+ *
+ * @start: Returns start address of buffer
+ * @size: Returns size of buffer in bytes
+ * @offset: Returns the byte offset where the next output trace record will
+ * @count: Returns the number of trace records recorded
+ * be written (or would be if the buffer was large enough)
+ */
+void iotrace_get_buffer(ulong *start, ulong *size, ulong *offset, ulong *count);
+
+#endif /* __IOTRACE_H */
diff --git a/include/lcd.h b/include/lcd.h
index 5f84cd3..cc2ee3f 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -258,10 +258,6 @@ extern vidinfo_t panel_info;
/* Video functions */
-#if defined(CONFIG_RBC823)
-void lcd_disable(void);
-#endif
-
void lcd_putc(const char c);
void lcd_puts(const char *s);
void lcd_printf(const char *fmt, ...);
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 0546565..991bd8e 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -719,4 +719,23 @@ static inline int onfi_get_sync_timing_mode(struct nand_chip *chip)
}
#endif
+/**
+ * Check if the opcode's address should be sent only on the lower 8 bits
+ * @command: opcode to check
+ */
+static inline int nand_opcode_8bits(unsigned int command)
+{
+ switch (command) {
+ case NAND_CMD_READID:
+ case NAND_CMD_PARAM:
+ case NAND_CMD_GET_FEATURES:
+ case NAND_CMD_SET_FEATURES:
+ return 1;
+ default:
+ break;
+ }
+ return 0;
+}
+
+
#endif /* __LINUX_MTD_NAND_H */
diff --git a/include/linux/mtd/omap_elm.h b/include/linux/mtd/omap_elm.h
index 45454ea..b8096b0 100644
--- a/include/linux/mtd/omap_elm.h
+++ b/include/linux/mtd/omap_elm.h
@@ -24,6 +24,9 @@
#define ELM_LOCATION_STATUS_ECC_CORRECTABLE_MASK (0x100)
#define ELM_LOCATION_STATUS_ECC_NB_ERRORS_MASK (0x1F)
+#define ELM_MAX_CHANNELS 8
+#define ELM_MAX_ERROR_COUNT 16
+
#ifndef __ASSEMBLY__
enum bch_level {
@@ -43,7 +46,7 @@ struct syndrome {
struct location {
u32 location_status; /* 0x800 */
u8 res1[124]; /* 0x804 */
- u32 error_location_x[16]; /* 0x880.... */
+ u32 error_location_x[ELM_MAX_ERROR_COUNT]; /* 0x880, 0x980, .. */
u8 res2[64]; /* 0x8c0 */
};
@@ -63,12 +66,12 @@ struct elm {
u8 res2[92]; /* 0x024 */
u32 page_ctrl; /* 0x080 */
u8 res3[892]; /* 0x084 */
- struct syndrome syndrome_fragments[8]; /* 0x400 */
+ struct syndrome syndrome_fragments[ELM_MAX_CHANNELS]; /* 0x400,0x420 */
u8 res4[512]; /* 0x600 */
- struct location error_location[8]; /* 0x800 */
+ struct location error_location[ELM_MAX_CHANNELS]; /* 0x800,0x900 ... */
};
-int elm_check_error(u8 *syndrome, u32 nibbles, u32 *error_count,
+int elm_check_error(u8 *syndrome, enum bch_level bch_type, u32 *error_count,
u32 *error_locations);
int elm_config(enum bch_level level);
void elm_reset(void);
diff --git a/include/linux/mtd/omap_gpmc.h b/include/linux/mtd/omap_gpmc.h
index 22f6573..9a86582 100644
--- a/include/linux/mtd/omap_gpmc.h
+++ b/include/linux/mtd/omap_gpmc.h
@@ -11,6 +11,7 @@
#define GPMC_BUF_EMPTY 0
#define GPMC_BUF_FULL 1
+#define GPMC_MAX_SECTORS 8
enum omap_ecc {
/* 1-bit ECC calculation by Software, Error detection by Software */
@@ -26,6 +27,8 @@ enum omap_ecc {
OMAP_ECC_BCH8_CODE_HW_DETECTION_SW,
/* 8-bit ECC calculation by GPMC, Error detection by ELM */
OMAP_ECC_BCH8_CODE_HW,
+ /* 16-bit ECC calculation by GPMC, Error detection by ELM */
+ OMAP_ECC_BCH16_CODE_HW,
};
struct gpmc_cs {
@@ -46,6 +49,10 @@ struct bch_res_0_3 {
u32 bch_result_x[4];
};
+struct bch_res_4_6 {
+ u32 bch_result_x[3];
+};
+
struct gpmc {
u8 res1[0x10];
u32 sysconfig; /* 0x10 */
@@ -75,7 +82,9 @@ struct gpmc {
u8 res7[12]; /* 0x224 */
u32 testmomde_ctrl; /* 0x230 */
u8 res8[12]; /* 0x234 */
- struct bch_res_0_3 bch_result_0_3[2]; /* 0x240 */
+ struct bch_res_0_3 bch_result_0_3[GPMC_MAX_SECTORS]; /* 0x240,0x250, */
+ u8 res9[16 * 4]; /* 0x2C0 - 0x2FF */
+ struct bch_res_4_6 bch_result_4_6[GPMC_MAX_SECTORS]; /* 0x300,0x310, */
};
/* Used for board specific gpmc initialization */
diff --git a/include/mmc.h b/include/mmc.h
index a3a100b..f46572e 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -32,15 +32,13 @@
#define MMC_VERSION_4_41 (MMC_VERSION_MMC | 0x429)
#define MMC_VERSION_4_5 (MMC_VERSION_MMC | 0x405)
-#define MMC_MODE_HS 0x001
-#define MMC_MODE_HS_52MHz 0x010
-#define MMC_MODE_4BIT 0x100
-#define MMC_MODE_8BIT 0x200
-#define MMC_MODE_SPI 0x400
-#define MMC_MODE_HC 0x800
-
-#define MMC_MODE_MASK_WIDTH_BITS (MMC_MODE_4BIT | MMC_MODE_8BIT)
-#define MMC_MODE_WIDTH_BITS_SHIFT 8
+#define MMC_MODE_HS (1 << 0)
+#define MMC_MODE_HS_52MHz (1 << 1)
+#define MMC_MODE_4BIT (1 << 2)
+#define MMC_MODE_8BIT (1 << 3)
+#define MMC_MODE_SPI (1 << 4)
+#define MMC_MODE_HC (1 << 5)
+#define MMC_MODE_DDR_52MHz (1 << 6)
#define SD_DATA_4BIT 0x00040000
@@ -100,9 +98,6 @@
#define SD_HIGHSPEED_BUSY 0x00020000
#define SD_HIGHSPEED_SUPPORTED 0x00020000
-#define MMC_HS_TIMING 0x00000100
-#define MMC_HS_52MHZ 0x2
-
#define OCR_BUSY 0x80000000
#define OCR_HCS 0x40000000
#define OCR_VOLTAGE_MASK 0x007FFF80
@@ -178,10 +173,16 @@
#define EXT_CSD_CARD_TYPE_26 (1 << 0) /* Card can run at 26MHz */
#define EXT_CSD_CARD_TYPE_52 (1 << 1) /* Card can run at 52MHz */
+#define EXT_CSD_CARD_TYPE_DDR_1_8V (1 << 2)
+#define EXT_CSD_CARD_TYPE_DDR_1_2V (1 << 3)
+#define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \
+ | EXT_CSD_CARD_TYPE_DDR_1_2V)
#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */
#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
#define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */
+#define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */
+#define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */
#define EXT_CSD_BOOT_ACK_ENABLE (1 << 6)
#define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3)
diff --git a/include/mpc8260.h b/include/mpc8260.h
index a8ae278..9980c74 100644
--- a/include/mpc8260.h
+++ b/include/mpc8260.h
@@ -21,10 +21,6 @@
#if defined(CONFIG_MPC8272_FAMILY)
#ifdef CONFIG_MPC8247
#define CPU_ID_STR "MPC8247"
-#elif defined CONFIG_MPC8248
-#define CPU_ID_STR "MPC8248"
-#elif defined CONFIG_MPC8271
-#define CPU_ID_STR "MPC8271"
#else
#define CPU_ID_STR "MPC8272"
#endif
diff --git a/include/part.h b/include/part.h
index f2c8c64..a496a4a 100644
--- a/include/part.h
+++ b/include/part.h
@@ -180,6 +180,17 @@ int test_part_amiga (block_dev_desc_t *dev_desc);
#include <part_efi.h>
/* disk/part_efi.c */
int get_partition_info_efi (block_dev_desc_t * dev_desc, int part, disk_partition_t *info);
+/**
+ * get_partition_info_efi_by_name() - Find the specified GPT partition table entry
+ *
+ * @param dev_desc - block device descriptor
+ * @param gpt_name - the specified table entry name
+ * @param info - returns the disk partition info
+ *
+ * @return - '0' on match, '-1' on no match, otherwise error
+ */
+int get_partition_info_efi_by_name(block_dev_desc_t *dev_desc,
+ const char *name, disk_partition_t *info);
void print_part_efi (block_dev_desc_t *dev_desc);
int test_part_efi (block_dev_desc_t *dev_desc);
diff --git a/include/pcmcia.h b/include/pcmcia.h
index 952a67c..8aec254 100644
--- a/include/pcmcia.h
+++ b/include/pcmcia.h
@@ -21,16 +21,7 @@
#if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B)
- /* The RPX series use SLOT_B */
-#if defined(CONFIG_RPXLITE)
-# define CONFIG_PCMCIA_SLOT_B
-#elif defined(CONFIG_FADS) /* The FADS series are a mess */
-# if defined(CONFIG_MPC86x) || defined(CONFIG_MPC821)
-# define CONFIG_PCMCIA_SLOT_A
-# else
-# define CONFIG_PCMCIA_SLOT_B
-# endif
-#elif defined(CONFIG_TQM8xxL) || defined(CONFIG_SVM_SC8xx)
+#if defined(CONFIG_TQM8xxL) || defined(CONFIG_SVM_SC8xx)
# define CONFIG_PCMCIA_SLOT_B /* The TQM8xxL use SLOT_B */
#elif defined(CONFIG_SPD823TS) /* The SPD8xx use SLOT_B */
# define CONFIG_PCMCIA_SLOT_B
@@ -44,8 +35,6 @@
# define CONFIG_PCMCIA_SLOT_B
#elif defined(CONFIG_ATC) /* The ATC use SLOT_A */
# define CONFIG_PCMCIA_SLOT_A
-#elif defined(CONFIG_NETTA)
-# define CONFIG_PCMCIA_SLOT_A
#elif defined(CONFIG_UC100) /* The UC100 use SLOT_B */
# define CONFIG_PCMCIA_SLOT_B
#else
diff --git a/include/power/max77693_pmic.h b/include/power/max77693_pmic.h
index 616d051..3d59e59 100644
--- a/include/power/max77693_pmic.h
+++ b/include/power/max77693_pmic.h
@@ -10,8 +10,6 @@
#include <power/power_chrg.h>
-enum {CHARGER_ENABLE, CHARGER_DISABLE};
-
#define CHARGER_MIN_CURRENT 200
#define CHARGER_MAX_CURRENT 2000
diff --git a/include/power/max8997_pmic.h b/include/power/max8997_pmic.h
index 74c5d54..728d60a 100644
--- a/include/power/max8997_pmic.h
+++ b/include/power/max8997_pmic.h
@@ -170,7 +170,6 @@ enum {
#define SAFEOUT_3_30V 0x03
/* Charger */
-enum {CHARGER_ENABLE, CHARGER_DISABLE};
#define DETBAT (1 << 2)
#define MBCICHFCSET (1 << 4)
#define MBCHOSTEN (1 << 6)
diff --git a/include/power/pmic.h b/include/power/pmic.h
index 8f282dd..a62e6c9 100644
--- a/include/power/pmic.h
+++ b/include/power/pmic.h
@@ -17,6 +17,11 @@ enum { I2C_PMIC, I2C_NUM, };
enum { PMIC_READ, PMIC_WRITE, };
enum { PMIC_SENSOR_BYTE_ORDER_LITTLE, PMIC_SENSOR_BYTE_ORDER_BIG, };
+enum {
+ PMIC_CHARGER_DISABLE,
+ PMIC_CHARGER_ENABLE,
+};
+
struct p_i2c {
unsigned char addr;
unsigned char *buf;
diff --git a/include/power/tps65090_pmic.h b/include/power/tps65090_pmic.h
new file mode 100644
index 0000000..dcf99c9
--- /dev/null
+++ b/include/power/tps65090_pmic.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright (c) 2012 The Chromium OS Authors.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __TPS65090_PMIC_H_
+#define __TPS65090_PMIC_H_
+
+/* I2C device address for TPS65090 PMU */
+#define TPS65090_I2C_ADDR 0x48
+
+enum {
+ /* Status register fields */
+ TPS65090_ST1_OTC = 1 << 0,
+ TPS65090_ST1_OCC = 1 << 1,
+ TPS65090_ST1_STATE_SHIFT = 4,
+ TPS65090_ST1_STATE_MASK = 0xf << TPS65090_ST1_STATE_SHIFT,
+};
+
+/**
+ * Enable FET
+ *
+ * @param fet_id FET ID, value between 1 and 7
+ * @return 0 on success, non-0 on failure
+ */
+int tps65090_fet_enable(unsigned int fet_id);
+
+/**
+ * Disable FET
+ *
+ * @param fet_id FET ID, value between 1 and 7
+ * @return 0 on success, non-0 on failure
+ */
+int tps65090_fet_disable(unsigned int fet_id);
+
+/**
+ * Is FET enabled?
+ *
+ * @param fet_id FET ID, value between 1 and 7
+ * @return 1 enabled, 0 disabled, negative value on failure
+ */
+int tps65090_fet_is_enabled(unsigned int fet_id);
+
+/**
+ * Enable / disable the battery charger
+ *
+ * @param enable 0 to disable charging, non-zero to enable
+ */
+int tps65090_set_charge_enable(int enable);
+
+/**
+ * Check whether we have enabled battery charging
+ *
+ * @return 1 if enabled, 0 if disabled
+ */
+int tps65090_get_charging(void);
+
+/**
+ * Return the value of the status register
+ *
+ * @return status register value, or -1 on error
+ */
+int tps65090_get_status(void);
+
+/**
+ * Initialize the TPS65090 PMU.
+ *
+ * @return 0 on success, non-0 on failure
+ */
+int tps65090_init(void);
+
+#endif /* __TPS65090_PMIC_H_ */
diff --git a/include/power/tps65218.h b/include/power/tps65218.h
new file mode 100644
index 0000000..67aa2f8
--- /dev/null
+++ b/include/power/tps65218.h
@@ -0,0 +1,63 @@
+/*
+ * (C) Copyright 2014
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __POWER_TPS65218_H__
+#define __POWER_TPS65218_H__
+
+/* I2C chip address */
+#define TPS65218_CHIP_PM 0x24
+
+/* Registers */
+enum {
+ TPS65218_CHIPID = 0x00,
+ TPS65218_INT1,
+ TPS65218_INT2,
+ TPS65218_INT_MASK1,
+ TPS65218_INT_MASK2,
+ TPS65218_STATUS,
+ TPS65218_CONTROL,
+ TPS65218_FLAG,
+ TPS65218_PASSWORD = 0x10,
+ TPS65218_ENABLE1,
+ TPS65218_ENABLE2,
+ TPS65218_CONFIG1,
+ TPS65218_CONFIG2,
+ TPS65218_CONFIG3,
+ TPS65218_DCDC1,
+ TPS65218_DCDC2,
+ TPS65218_DCDC3,
+ TPS65218_DCDC4,
+ TPS65218_SLEW,
+ TPS65218_LDO1,
+ TPS65218_SEQ1 = 0x20,
+ TPS65218_SEQ2,
+ TPS65218_SEQ3,
+ TPS65218_SEQ4,
+ TPS65218_SEQ5,
+ TPS65218_SEQ6,
+ TPS65218_SEQ7,
+ TPS65218_PMIC_NUM_OF_REGS,
+};
+
+#define TPS65218_PROT_LEVEL_NONE 0x00
+#define TPS65218_PROT_LEVEL_1 0x01
+#define TPS65218_PROT_LEVEL_2 0x02
+
+#define TPS65218_PASSWORD_LOCK_FOR_WRITE 0x00
+#define TPS65218_PASSWORD_UNLOCK 0x7D
+
+#define TPS65218_DCDC_GO 0x80
+
+#define TPS65218_MASK_ALL_BITS 0xFF
+
+#define TPS65218_DCDC_VOLT_SEL_1100MV 0x19
+#define TPS65218_DCDC_VOLT_SEL_1330MV 0x30
+
+int tps65218_reg_write(uchar prot_level, uchar dest_reg, uchar dest_val,
+ uchar mask);
+int tps65218_voltage_update(uchar dc_cntrl_reg, uchar volt_sel);
+#endif /* __POWER_TPS65218_H__ */
diff --git a/include/status_led.h b/include/status_led.h
index ecff60d..0eb91b8 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -231,28 +231,6 @@ void status_led_set (int led, int state);
# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
-/***** RBC823 ********************************************************/
-#elif defined(CONFIG_RBC823)
-
-# define STATUS_LED_PAR im_ioport.iop_pcpar
-# define STATUS_LED_DIR im_ioport.iop_pcdir
-# undef STATUS_LED_ODR
-# define STATUS_LED_DAT im_ioport.iop_pcdat
-
-# define STATUS_LED_BIT 0x0002 /* LED 0 is on PC.14 */
-# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
-# define STATUS_LED_STATE STATUS_LED_BLINKING
-# define STATUS_LED_BIT1 0x0004 /* LED 1 is on PC.13 */
-# define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ)
-# define STATUS_LED_STATE1 STATUS_LED_OFF
-
-# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
-
-# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
-
-/***** NetPhone ********************************************************/
-#elif defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2)
-/* XXX empty just to avoid the error */
/***** STx XTc ********************************************************/
#elif defined(CONFIG_STXXTC)
/* XXX empty just to avoid the error */
diff --git a/include/tps6586x.h b/include/tps6586x.h
index 10ca103..78ce428 100644
--- a/include/tps6586x.h
+++ b/include/tps6586x.h
@@ -5,7 +5,7 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#ifndef __H_
+#ifndef _TPS6586X_H_
#define _TPS6586X_H_
enum {
diff --git a/include/rsa-checksum.h b/include/u-boot/rsa-checksum.h
index 612db85..c996fb3 100644
--- a/include/rsa-checksum.h
+++ b/include/u-boot/rsa-checksum.h
@@ -9,8 +9,8 @@
#include <errno.h>
#include <image.h>
-#include <sha1.h>
-#include <sha256.h>
+#include <u-boot/sha1.h>
+#include <u-boot/sha256.h>
extern const uint8_t padding_sha256_rsa4096[];
extern const uint8_t padding_sha256_rsa2048[];
diff --git a/include/rsa.h b/include/u-boot/rsa.h
index a5680ab..325751a 100644
--- a/include/rsa.h
+++ b/include/u-boot/rsa.h
@@ -60,7 +60,8 @@ int rsa_sign(struct image_sign_info *info,
*
* @info: Specifies key and FIT information
* @keydest: Destination FDT blob for public key data
- * @return: 0, on success, -ve on error
+ * @return: 0, on success, -ENOSPC if the keydest FDT blob ran out of space,
+ other -ve value on error
*/
int rsa_add_verify_data(struct image_sign_info *info, void *keydest);
#else
diff --git a/include/sha1.h b/include/u-boot/sha1.h
index da09dab..da09dab 100644
--- a/include/sha1.h
+++ b/include/u-boot/sha1.h
diff --git a/include/sha256.h b/include/u-boot/sha256.h
index beadab3..beadab3 100644
--- a/include/sha256.h
+++ b/include/u-boot/sha256.h