From 532cb7f5ada0cc3779c33606d760ec99f6aa847a Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Wed, 27 Sep 2017 23:03:12 +0530 Subject: rk3288: vyasa: Add TPL support Since the size of SPL can't be exceeded 0x8000 bytes in RK3288, it is not possible add new SPL features like Falcon mode or etc. So add TPL stage so-that adding new features to SPL is possible. - TPL: DRAM init, clocks - SPL: MMC, falcon, etc Signed-off-by: Jagan Teki Reviewed-by: Philipp Tomsich Acked-by: Philipp Tomsich diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile index 79e9704..daafc8d 100644 --- a/arch/arm/mach-rockchip/Makefile +++ b/arch/arm/mach-rockchip/Makefile @@ -12,6 +12,7 @@ obj-spl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o save_boot_param.o obj-tpl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o save_boot_param.o obj-tpl-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board-tpl.o +obj-tpl-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-tpl.o obj-tpl-$(CONFIG_ROCKCHIP_RK3368) += rk3368-board-tpl.o obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o diff --git a/arch/arm/mach-rockchip/rk3288-board-spl.c b/arch/arm/mach-rockchip/rk3288-board-spl.c index 23af653..5239cbc 100644 --- a/arch/arm/mach-rockchip/rk3288-board-spl.c +++ b/arch/arm/mach-rockchip/rk3288-board-spl.c @@ -204,12 +204,15 @@ void board_init_f(ulong dummy) } #endif +#if !defined(CONFIG_SUPPORT_TPL) debug("\nspl:init dram\n"); ret = uclass_get_device(UCLASS_RAM, 0, &dev); if (ret) { debug("DRAM init failed: %d\n", ret); return; } +#endif + #if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) && !defined(CONFIG_SPL_BOARD_INIT) back_to_bootrom(); #endif diff --git a/arch/arm/mach-rockchip/rk3288-board-tpl.c b/arch/arm/mach-rockchip/rk3288-board-tpl.c new file mode 100644 index 0000000..3d08b5b --- /dev/null +++ b/arch/arm/mach-rockchip/rk3288-board-tpl.c @@ -0,0 +1,84 @@ +/* + * Copyright (C) 2017 Amarula Solutions + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define GRF_BASE 0xff770000 +void board_init_f(ulong dummy) +{ + struct udevice *dev; + int ret; + + /* Example code showing how to enable the debug UART on RK3288 */ + /* Enable early UART on the RK3288 */ + struct rk3288_grf * const grf = (void *)GRF_BASE; + + rk_clrsetreg(&grf->gpio7ch_iomux, GPIO7C7_MASK << GPIO7C7_SHIFT | + GPIO7C6_MASK << GPIO7C6_SHIFT, + GPIO7C7_UART2DBG_SOUT << GPIO7C7_SHIFT | + GPIO7C6_UART2DBG_SIN << GPIO7C6_SHIFT); + /* + * Debug UART can be used from here if required: + * + * debug_uart_init(); + * printch('a'); + * printhex8(0x1234); + * printascii("string"); + */ + debug_uart_init(); + + ret = spl_early_init(); + if (ret) { + debug("spl_early_init() failed: %d\n", ret); + hang(); + } + + rockchip_timer_init(); + configure_l2ctlr(); + + ret = rockchip_get_clk(&dev); + if (ret) { + debug("CLK init failed: %d\n", ret); + return; + } + + ret = uclass_get_device(UCLASS_RAM, 0, &dev); + if (ret) { + debug("DRAM init failed: %d\n", ret); + return; + } +} + +void board_return_to_bootrom(void) +{ + back_to_bootrom(); +} + +u32 spl_boot_device(void) +{ + return BOOT_DEVICE_BOOTROM; +} + +void spl_board_init(void) +{ + puts("\nU-Boot TPL " PLAIN_VERSION " (" U_BOOT_DATE " - " \ + U_BOOT_TIME ")\n"); +} diff --git a/arch/arm/mach-rockchip/rk3288/Kconfig b/arch/arm/mach-rockchip/rk3288/Kconfig index 4ad2940..6beb26f 100644 --- a/arch/arm/mach-rockchip/rk3288/Kconfig +++ b/arch/arm/mach-rockchip/rk3288/Kconfig @@ -87,6 +87,22 @@ config TARGET_POPMETAL_RK3288 config TARGET_VYASA_RK3288 bool "Vyasa-RK3288" select BOARD_LATE_INIT + select TPL + select SUPPORT_TPL + select TPL_DM + select TPL_REGMAP + select TPL_SYSCON + select TPL_CLK + select TPL_RAM + select TPL_OF_PLATDATA + select TPL_OF_CONTROL + select TPL_BOOTROM_SUPPORT + select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL + select ROCKCHIP_BROM_HELPER + select TPL_DRIVERS_MISC_SUPPORT + select TPL_LIBCOMMON_SUPPORT + select TPL_LIBGENERIC_SUPPORT + select TPL_SERIAL_SUPPORT help Vyasa is a RK3288-based development board with 2 USB ports, HDMI, VGA, micro-SD card, audio, WiFi and Gigabit Ethernet, It diff --git a/configs/vyasa-rk3288_defconfig b/configs/vyasa-rk3288_defconfig index 7db7b0b..7bd6068 100644 --- a/configs/vyasa-rk3288_defconfig +++ b/configs/vyasa-rk3288_defconfig @@ -1,8 +1,11 @@ CONFIG_ARM=y +# CONFIG_SPL_USE_ARCH_MEMCPY is not set +# CONFIG_SPL_USE_ARCH_MEMSET is not set CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ROCKCHIP_RK3288=y CONFIG_TARGET_VYASA_RK3288=y +CONFIG_TPL_TEXT_BASE=0xff704004 CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_DEFAULT_DEVICE_TREE="rk3288-vyasa" CONFIG_DEBUG_UART=y diff --git a/doc/README.rockchip b/doc/README.rockchip index 12fec38..4b7be0b 100644 --- a/doc/README.rockchip +++ b/doc/README.rockchip @@ -150,6 +150,24 @@ Note: rk3036 SDMMC and debug uart use the same iomux, so if you boot from SD, th debug uart must be disabled +Booting from an SD card on RK3288 with TPL +========================================== + +Since the size of SPL can't be exceeded 0x8000 bytes in RK3288, it is not possible add +new SPL features like Falcon mode or etc. + +So introduce TPL so-that adding new features to SPL is possible because now TPL should +run minimal with code like DDR, clock etc and rest of new features in SPL. + +As of now TPL is added on Vyasa-RK3288 board. + +To write an image that boots from an SD card (assumed to be /dev/mmcblk0): + + ./tools/mkimage -n rk3288 -T rksd -d ./tpl/u-boot-tpl.bin out && + cat ./spl/u-boot-spl-dtb.bin >> out && + sudo dd if=out of=/dev/mmcblk0 seek=64 && + sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 seek=256 + Booting from an SD card on RK3188 ================================= diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h index e9e3c40..34f2558 100644 --- a/include/configs/rk3288_common.h +++ b/include/configs/rk3288_common.h @@ -32,7 +32,11 @@ #define CONFIG_SYS_INIT_SP_ADDR 0x00100000 #define CONFIG_SYS_LOAD_ADDR 0x00800800 #define CONFIG_SPL_STACK 0xff718000 -#define CONFIG_SPL_TEXT_BASE 0xff704004 +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_TPL_BOOTROM_SUPPORT) +# define CONFIG_SPL_TEXT_BASE 0x0 +#else +# define CONFIG_SPL_TEXT_BASE 0xff704004 +#endif /* MMC/SD IP block */ #define CONFIG_BOUNCE_BUFFER -- cgit v0.10.2