From acd3b0760b1fb045cc67f394c33029efba391458 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 25 Oct 2016 12:41:45 +0200 Subject: arm64: mvebu: armada-8k: Only configure xHCI power on DB-88F7040 board This patch uses of_machine_is_compatible() to detect the board at runtime and only configured the I2C IO expander for the xHCI power / reset on the DB-88F7040 board. As this code will be used by other Armada-7k/8k ports, its necessary to use this runtime detection here. Signed-off-by: Stefan Roese Cc: Nadav Haklai Cc: Neta Zur Hershkovits Cc: Kostya Porotchkin Cc: Omri Itach Cc: Igal Liberman Cc: Haim Boot Cc: Hanna Hawa diff --git a/board/Marvell/mvebu_armada-8k/board.c b/board/Marvell/mvebu_armada-8k/board.c index 48bd55c..7d1b5d9 100644 --- a/board/Marvell/mvebu_armada-8k/board.c +++ b/board/Marvell/mvebu_armada-8k/board.c @@ -5,6 +5,7 @@ */ #include +#include #include #include #include @@ -12,6 +13,11 @@ DECLARE_GLOBAL_DATA_PTR; +/* + * Information specific to the DB-88F7040 eval board. We strive to use + * DT for such platform specfic configurations. At some point, this + * might be removed here and implemented via DT. + */ /* IO expander I2C device */ #define I2C_IO_EXP_ADDR 0x21 #define I2C_IO_CFG_REG_0 0x6 @@ -44,45 +50,47 @@ int board_xhci_config(void) int ret; u8 buf[8]; - /* Configure IO exander PCA9555: 7bit address 0x21 */ - ret = i2c_get_chip_for_busnum(0, I2C_IO_EXP_ADDR, 1, &dev); - if (ret) { - printf("Cannot find PCA9555: %d\n", ret); - return 0; - } - - /* - * Read configuration (direction) and set VBUS pin as output - * (reset pin = output) - */ - ret = dm_i2c_read(dev, I2C_IO_CFG_REG_0, buf, 1); - if (ret) { - printf("Failed to read IO expander value via I2C\n"); - return -EIO; - } - buf[0] &= ~I2C_IO_REG_VBUS; - buf[0] &= ~I2C_IO_REG_CL; - ret = dm_i2c_write(dev, I2C_IO_CFG_REG_0, buf, 1); - if (ret) { - printf("Failed to set IO expander via I2C\n"); - return -EIO; - } - - /* Read output value and configure it */ - ret = dm_i2c_read(dev, I2C_IO_DATA_OUT_REG_0, buf, 1); - if (ret) { - printf("Failed to read IO expander value via I2C\n"); - return -EIO; + if (of_machine_is_compatible("marvell,armada7040-db")) { + /* Configure IO exander PCA9555: 7bit address 0x21 */ + ret = i2c_get_chip_for_busnum(0, I2C_IO_EXP_ADDR, 1, &dev); + if (ret) { + printf("Cannot find PCA9555: %d\n", ret); + return 0; + } + + /* + * Read configuration (direction) and set VBUS pin as output + * (reset pin = output) + */ + ret = dm_i2c_read(dev, I2C_IO_CFG_REG_0, buf, 1); + if (ret) { + printf("Failed to read IO expander value via I2C\n"); + return -EIO; + } + buf[0] &= ~I2C_IO_REG_VBUS; + buf[0] &= ~I2C_IO_REG_CL; + ret = dm_i2c_write(dev, I2C_IO_CFG_REG_0, buf, 1); + if (ret) { + printf("Failed to set IO expander via I2C\n"); + return -EIO; + } + + /* Read output value and configure it */ + ret = dm_i2c_read(dev, I2C_IO_DATA_OUT_REG_0, buf, 1); + if (ret) { + printf("Failed to read IO expander value via I2C\n"); + return -EIO; + } + buf[0] &= ~I2C_IO_REG_VBUS; + buf[0] |= I2C_IO_REG_CL; + ret = dm_i2c_write(dev, I2C_IO_DATA_OUT_REG_0, buf, 1); + if (ret) { + printf("Failed to set IO expander via I2C\n"); + return -EIO; + } + + mdelay(500); /* required delay to let output value settle */ } - buf[0] &= ~I2C_IO_REG_VBUS; - buf[0] |= I2C_IO_REG_CL; - ret = dm_i2c_write(dev, I2C_IO_DATA_OUT_REG_0, buf, 1); - if (ret) { - printf("Failed to set IO expander via I2C\n"); - return -EIO; - } - - mdelay(500); /* required delay to let output value settle */ return 0; } @@ -93,38 +101,40 @@ int board_xhci_enable(void) int ret; u8 buf[8]; - /* - * This function enables all USB ports simultaniously, - * it only needs to get called once - */ - if (usb_enabled) - return 0; - - /* Configure IO exander PCA9555: 7bit address 0x21 */ - ret = i2c_get_chip_for_busnum(0, I2C_IO_EXP_ADDR, 1, &dev); - if (ret) { - printf("Cannot find PCA9555: %d\n", ret); - return 0; - } - - /* Read VBUS output value */ - ret = dm_i2c_read(dev, I2C_IO_DATA_OUT_REG_0, buf, 1); - if (ret) { - printf("Failed to read IO expander value via I2C\n"); - return -EIO; + if (of_machine_is_compatible("marvell,armada7040-db")) { + /* + * This function enables all USB ports simultaniously, + * it only needs to get called once + */ + if (usb_enabled) + return 0; + + /* Configure IO exander PCA9555: 7bit address 0x21 */ + ret = i2c_get_chip_for_busnum(0, I2C_IO_EXP_ADDR, 1, &dev); + if (ret) { + printf("Cannot find PCA9555: %d\n", ret); + return 0; + } + + /* Read VBUS output value */ + ret = dm_i2c_read(dev, I2C_IO_DATA_OUT_REG_0, buf, 1); + if (ret) { + printf("Failed to read IO expander value via I2C\n"); + return -EIO; + } + + /* Enable VBUS power: Set output value of VBUS pin as enabled */ + buf[0] |= I2C_IO_REG_VBUS; + ret = dm_i2c_write(dev, I2C_IO_DATA_OUT_REG_0, buf, 1); + if (ret) { + printf("Failed to set IO expander via I2C\n"); + return -EIO; + } + + mdelay(500); /* required delay to let output value settle */ + usb_enabled = 1; } - /* Enable VBUS power: Set output value of VBUS pin as enabled */ - buf[0] |= I2C_IO_REG_VBUS; - ret = dm_i2c_write(dev, I2C_IO_DATA_OUT_REG_0, buf, 1); - if (ret) { - printf("Failed to set IO expander via I2C\n"); - return -EIO; - } - - mdelay(500); /* required delay to let output value settle */ - usb_enabled = 1; - return 0; } -- cgit v0.10.2