From 9082405d47438b5b417b38f69eb3a31c66669300 Mon Sep 17 00:00:00 2001 From: York Sun Date: Wed, 28 Dec 2016 08:43:33 -0800 Subject: powerpc: T1023RDB: Remove macro CONFIG_T1023RDB Use TARGET_T1023RDB from Kconfig instead. Signed-off-by: York Sun diff --git a/board/freescale/t102xrdb/ddr.c b/board/freescale/t102xrdb/ddr.c index 9e1b16b..c09199f 100644 --- a/board/freescale/t102xrdb/ddr.c +++ b/board/freescale/t102xrdb/ddr.c @@ -136,7 +136,7 @@ found: popts->data_bus_width = DDR_DATA_BUS_WIDTH_32; #endif -#ifdef CONFIG_T1023RDB +#ifdef CONFIG_TARGET_T1023RDB popts->wrlvl_ctl_2 = 0x07070606; popts->half_strength_driver_enable = 1; popts->cpo_sample = 0x43; diff --git a/board/freescale/t102xrdb/eth_t102xrdb.c b/board/freescale/t102xrdb/eth_t102xrdb.c index 02b283d..dadfaf1 100644 --- a/board/freescale/t102xrdb/eth_t102xrdb.c +++ b/board/freescale/t102xrdb/eth_t102xrdb.c @@ -73,7 +73,7 @@ int board_eth_init(bd_t *bis) case 0x135: /* set the on-board 2.5G SGMII AQR105 PHY */ fm_info_set_phy_address(FM1_DTSEC3, SGMII_AQR_PHY_ADDR); -#ifdef CONFIG_T1023RDB +#ifdef CONFIG_TARGET_T1023RDB /* set the on-board 1G SGMII RTL8211F PHY */ fm_info_set_phy_address(FM1_DTSEC1, SGMII_RTK_PHY_ADDR); #endif @@ -92,7 +92,7 @@ int board_eth_init(bd_t *bis) fm_info_set_mdio(i, dev); break; case PHY_INTERFACE_MODE_SGMII: -#if defined(CONFIG_T1023RDB) +#if defined(CONFIG_TARGET_T1023RDB) dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME); #elif defined(CONFIG_T1024RDB) dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME); diff --git a/board/freescale/t102xrdb/t102xrdb.c b/board/freescale/t102xrdb/t102xrdb.c index 24df4b4..3174726 100644 --- a/board/freescale/t102xrdb/t102xrdb.c +++ b/board/freescale/t102xrdb/t102xrdb.c @@ -19,7 +19,7 @@ #include "t102xrdb.h" #ifdef CONFIG_T1024RDB #include "cpld.h" -#elif defined(CONFIG_T1023RDB) +#elif defined(CONFIG_TARGET_T1023RDB) #include #include #endif @@ -27,7 +27,7 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_T1023RDB +#ifdef CONFIG_TARGET_T1023RDB enum { GPIO1_SD_SEL = 0x00020000, /* GPIO1_14, 0: eMMC, 1:SD/MMC */ GPIO1_EMMC_SEL, @@ -54,7 +54,7 @@ int checkboard(void) #if defined(CONFIG_T1024RDB) printf("Board rev: 0x%02x CPLD ver: 0x%02x, ", CPLD_READ(hw_ver), CPLD_READ(sw_ver)); -#elif defined(CONFIG_T1023RDB) +#elif defined(CONFIG_TARGET_T1023RDB) printf("Rev%c, ", t1023rdb_ctrl(GPIO3_GET_VERSION) + 'B'); #endif printf("boot from "); @@ -74,7 +74,7 @@ int checkboard(void) reg = ((reg & CPLD_LBMAP_MASK) >> CPLD_LBMAP_SHIFT); printf("NOR vBank%d\n", reg); } -#elif defined(CONFIG_T1023RDB) +#elif defined(CONFIG_TARGET_T1023RDB) #ifdef CONFIG_NAND puts("NAND\n"); #else @@ -196,7 +196,7 @@ int ft_board_setup(void *blob, bd_t *bd) fdt_fixup_board_enet(blob); #endif -#ifdef CONFIG_T1023RDB +#ifdef CONFIG_TARGET_T1023RDB if (t1023rdb_ctrl(GPIO3_GET_VERSION) > 0) fdt_enable_nor(blob); #endif @@ -204,7 +204,7 @@ int ft_board_setup(void *blob, bd_t *bd) return 0; } -#ifdef CONFIG_T1023RDB +#ifdef CONFIG_TARGET_T1023RDB /* Enable NOR flash for RevC */ static void fdt_enable_nor(void *blob) { diff --git a/board/freescale/t102xrdb/t102xrdb.h b/board/freescale/t102xrdb/t102xrdb.h index ae5c60f..6634e7a 100644 --- a/board/freescale/t102xrdb/t102xrdb.h +++ b/board/freescale/t102xrdb/t102xrdb.h @@ -9,7 +9,7 @@ void fdt_fixup_board_enet(void *blob); void pci_of_setup(void *blob, bd_t *bd); -#ifdef CONFIG_T1023RDB +#ifdef CONFIG_TARGET_T1023RDB static u32 t1023rdb_ctrl(u32 ctrl_type); static void fdt_enable_nor(void *blob); #endif diff --git a/configs/T1023RDB_NAND_defconfig b/configs/T1023RDB_NAND_defconfig index 5649652..71de2a5 100644 --- a/configs/T1023RDB_NAND_defconfig +++ b/configs/T1023RDB_NAND_defconfig @@ -12,7 +12,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="T1023RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND" CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SPL=y diff --git a/configs/T1023RDB_SDCARD_defconfig b/configs/T1023RDB_SDCARD_defconfig index cc15635..dee5690 100644 --- a/configs/T1023RDB_SDCARD_defconfig +++ b/configs/T1023RDB_SDCARD_defconfig @@ -12,7 +12,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="T1023RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SPL=y diff --git a/configs/T1023RDB_SECURE_BOOT_defconfig b/configs/T1023RDB_SECURE_BOOT_defconfig index d35e288..936cc3e 100644 --- a/configs/T1023RDB_SECURE_BOOT_defconfig +++ b/configs/T1023RDB_SECURE_BOOT_defconfig @@ -7,7 +7,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="T1023RDB" CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y diff --git a/configs/T1023RDB_SPIFLASH_defconfig b/configs/T1023RDB_SPIFLASH_defconfig index 28350ad..5fd23e8 100644 --- a/configs/T1023RDB_SPIFLASH_defconfig +++ b/configs/T1023RDB_SPIFLASH_defconfig @@ -13,7 +13,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="T1023RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SPL=y diff --git a/configs/T1023RDB_defconfig b/configs/T1023RDB_defconfig index ef0005e..255da1b 100644 --- a/configs/T1023RDB_defconfig +++ b/configs/T1023RDB_defconfig @@ -5,7 +5,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="T1023RDB" CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index c2bdef3..ed157ba 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -62,7 +62,7 @@ #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #if defined(CONFIG_T1024RDB) #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_nand_rcw.cfg -#elif defined(CONFIG_T1023RDB) +#elif defined(CONFIG_TARGET_T1023RDB) #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_nand_rcw.cfg #endif #define CONFIG_SPL_NAND_BOOT @@ -81,7 +81,7 @@ #endif #if defined(CONFIG_T1024RDB) #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_spi_rcw.cfg -#elif defined(CONFIG_T1023RDB) +#elif defined(CONFIG_TARGET_T1023RDB) #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_spi_rcw.cfg #endif #define CONFIG_SPL_SPI_BOOT @@ -100,7 +100,7 @@ #endif #if defined(CONFIG_T1024RDB) #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_sd_rcw.cfg -#elif defined(CONFIG_T1023RDB) +#elif defined(CONFIG_TARGET_T1023RDB) #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_sd_rcw.cfg #endif #define CONFIG_SPL_MMC_BOOT @@ -177,7 +177,7 @@ #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ #if defined(CONFIG_T1024RDB) #define CONFIG_ENV_SECT_SIZE 0x10000 -#elif defined(CONFIG_T1023RDB) +#elif defined(CONFIG_TARGET_T1023RDB) #define CONFIG_ENV_SECT_SIZE 0x40000 #endif #elif defined(CONFIG_SDCARD) @@ -192,7 +192,7 @@ #define CONFIG_ENV_SIZE 0x2000 #if defined(CONFIG_T1024RDB) #define CONFIG_ENV_OFFSET (2 * CONFIG_SYS_NAND_BLOCK_SIZE) -#elif defined(CONFIG_T1023RDB) +#elif defined(CONFIG_TARGET_T1023RDB) #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) #endif #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) @@ -277,7 +277,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_SPD_BUS_NUM 0 #define SPD_EEPROM_ADDRESS 0x51 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ -#elif defined(CONFIG_T1023RDB) +#elif defined(CONFIG_TARGET_T1023RDB) #define CONFIG_SYS_FSL_DDR4 #define CONFIG_SYS_DDR_RAW_TIMING #define CONFIG_SYS_SDRAM_SIZE 2048 @@ -303,7 +303,7 @@ unsigned long get_board_ddr_clk(void); /* NOR Flash Timing Params */ #if defined(CONFIG_T1024RDB) #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 -#elif defined(CONFIG_T1023RDB) +#elif defined(CONFIG_TARGET_T1023RDB) #define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(0) | \ CSOR_NAND_TRHZ_80 | CSOR_NOR_ADM_SHFT_MODE_EN) #endif @@ -378,7 +378,7 @@ unsigned long get_board_ddr_clk(void); | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) -#elif defined(CONFIG_T1023RDB) +#elif defined(CONFIG_TARGET_T1023RDB) #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ @@ -733,7 +733,7 @@ unsigned long get_board_ddr_clk(void); #if defined(CONFIG_T1024RDB) #define CONFIG_SYS_FMAN_FW_ADDR (3 * CONFIG_SYS_NAND_BLOCK_SIZE) #define CONFIG_SYS_QE_FW_ADDR (4 * CONFIG_SYS_NAND_BLOCK_SIZE) -#elif defined(CONFIG_T1023RDB) +#elif defined(CONFIG_TARGET_T1023RDB) #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE) #define CONFIG_SYS_QE_FW_ADDR (12 * CONFIG_SYS_NAND_BLOCK_SIZE) #endif @@ -766,7 +766,7 @@ unsigned long get_board_ddr_clk(void); #define RGMII_PHY2_ADDR 0x6 #define SGMII_AQR_PHY_ADDR 0x2 #define FM1_10GEC1_PHY_ADDR 0x1 -#elif defined(CONFIG_T1023RDB) +#elif defined(CONFIG_TARGET_T1023RDB) #define RGMII_PHY1_ADDR 0x1 #define SGMII_RTK_PHY_ADDR 0x3 #define SGMII_AQR_PHY_ADDR 0x2 diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 364a471..4f9fb97 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -7792,7 +7792,6 @@ CONFIG_SYS_XWAY_EBU_BOOTCFG CONFIG_SYS_ZYNQ_QSPI_WAIT CONFIG_SYS_ZYNQ_SPI_WAIT CONFIG_SYS_i2C_FSL -CONFIG_T1023RDB CONFIG_T1024RDB CONFIG_T1040QDS CONFIG_T2080QDS -- cgit v0.10.2