From f6eac00aba2047dad50fb3c95a962d386b326673 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 30 Aug 2015 19:19:22 -0600 Subject: arm: Remove polaris and trizepsiv boards These boards have not been converted to generic board by the deadline. Remove them. Signed-off-by: Simon Glass Acked-by: Stefano Babic diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ad41ba3..a3a6c6e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -643,10 +643,6 @@ config TARGET_PXA255_IDP bool "Support pxa255_idp" select CPU_PXA -config TARGET_TRIZEPSIV - bool "Support trizepsiv" - select CPU_PXA - config TARGET_VPAC270 bool "Support vpac270" select CPU_PXA @@ -822,7 +818,6 @@ source "board/ti/ti816x/Kconfig" source "board/timll/devkit3250/Kconfig" source "board/toradex/colibri_pxa270/Kconfig" source "board/toradex/colibri_vf/Kconfig" -source "board/trizepsiv/Kconfig" source "board/technologic/ts4800/Kconfig" source "board/ttcontrol/vision2/Kconfig" source "board/vpac270/Kconfig" diff --git a/board/trizepsiv/Kconfig b/board/trizepsiv/Kconfig deleted file mode 100644 index 56b2557..0000000 --- a/board/trizepsiv/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_TRIZEPSIV - -config SYS_BOARD - default "trizepsiv" - -config SYS_CONFIG_NAME - default "trizepsiv" - -endif diff --git a/board/trizepsiv/MAINTAINERS b/board/trizepsiv/MAINTAINERS deleted file mode 100644 index ba48c2e..0000000 --- a/board/trizepsiv/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -TRIZEPSIV BOARD -M: Stefano Babic -S: Maintained -F: board/trizepsiv/ -F: include/configs/trizepsiv.h -F: configs/polaris_defconfig -F: configs/trizepsiv_defconfig diff --git a/board/trizepsiv/Makefile b/board/trizepsiv/Makefile deleted file mode 100644 index c49686f..0000000 --- a/board/trizepsiv/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := conxs.o eeprom.o diff --git a/board/trizepsiv/conxs.c b/board/trizepsiv/conxs.c deleted file mode 100644 index 1ddf05d..0000000 --- a/board/trizepsiv/conxs.c +++ /dev/null @@ -1,148 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefano Babic, DENX Gmbh, sbabic@denx.de - * - * (C) Copyright 2004 - * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net - * - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -#define RH_A_PSM (1 << 8) /* power switching mode */ -#define RH_A_NPS (1 << 9) /* no power switching */ - -extern struct serial_device serial_ffuart_device; -extern struct serial_device serial_btuart_device; -extern struct serial_device serial_stuart_device; - -#if CONFIG_MK_POLARIS -#define BOOT_CONSOLE "serial_stuart" -#else -#define BOOT_CONSOLE "serial_ffuart" -#endif -/* ------------------------------------------------------------------------- */ - -/* - * Miscelaneous platform dependent initialisations - */ - -int board_usb_init(int index, enum usb_init_type init) -{ - writel((readl(UHCHR) | UHCHR_PCPL | UHCHR_PSPL) & - ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE), - UHCHR); - - writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR); - - while (readl(UHCHR) & UHCHR_FSBIR) - ; - - writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR); - writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE); - - /* Clear any OTG Pin Hold */ - if (readl(PSSR) & PSSR_OTGPH) - writel(readl(PSSR) | PSSR_OTGPH, PSSR); - - writel(readl(UHCRHDA) & ~(RH_A_NPS), UHCRHDA); - writel(readl(UHCRHDA) | RH_A_PSM, UHCRHDA); - - /* Set port power control mask bits, only 3 ports. */ - writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB); - - return 0; -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ - return 0; -} - -void usb_board_stop(void) -{ - writel(readl(UHCHR) | UHCHR_FHR, UHCHR); - udelay(11); - writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR); - - writel(readl(UHCCOMS) | 1, UHCCOMS); - udelay(10); - - writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN); - - return; -} - -int board_init (void) -{ - /* We have RAM, disable cache */ - dcache_disable(); - icache_disable(); - - /* arch number of ConXS Board */ - gd->bd->bi_arch_number = 776; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0xa000003c; - - return 0; -} - -int board_late_init(void) -{ - char *console=getenv("boot_console"); - - if ((console == NULL) || (strcmp(console,"serial_btuart") && - strcmp(console,"serial_stuart") && - strcmp(console,"serial_ffuart"))) { - console = BOOT_CONSOLE; - } - setenv("stdout",console); - setenv("stdin", console); - setenv("stderr",console); - return 0; -} - -int dram_init(void) -{ - pxa2xx_dram_init(); - gd->ram_size = PHYS_SDRAM_1_SIZE; - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -} - -#ifdef CONFIG_DRIVER_DM9000 -int board_eth_init(bd_t *bis) -{ - return dm9000_initialize(bis); -} -#endif - -#ifdef CONFIG_CMD_MMC -int board_mmc_init(bd_t *bis) -{ - pxa_mmc_register(0); - return 0; -} -#endif diff --git a/board/trizepsiv/eeprom.c b/board/trizepsiv/eeprom.c deleted file mode 100644 index 1318edc..0000000 --- a/board/trizepsiv/eeprom.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefano Babic, DENX Software Engineering, sbabic@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -static int do_read_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - unsigned int i; - u8 data[2]; - - for (i=0; i < 0x40; i++) { - if (!(i % 0x10)) - printf("\n%08x:", i); - dm9000_read_srom_word(i, data); - printf(" %02x%02x", data[1], data[0]); - } - printf ("\n"); - return (0); -} - -static int do_write_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - int offset,value; - - if (argc < 4) - return cmd_usage(cmdtp); - - offset=simple_strtoul(argv[2],NULL,16); - value=simple_strtoul(argv[3],NULL,16); - if (offset > 0x40) { - printf("Wrong offset : 0x%x\n",offset); - return cmd_usage(cmdtp); - } - dm9000_write_srom_word(offset, value); - return (0); -} - -int do_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - if (argc < 2) - return cmd_usage(cmdtp); - - if (strcmp (argv[1],"read") == 0) - return (do_read_dm9000_eeprom(cmdtp,flag,argc,argv)); - else if (strcmp (argv[1],"write") == 0) - return (do_write_dm9000_eeprom(cmdtp,flag,argc,argv)); - else - return cmd_usage(cmdtp); -} - -U_BOOT_CMD( - dm9000ee,4,1,do_dm9000_eeprom, - "Read/Write eeprom connected to Ethernet Controller", - "\ndm9000ee write \n" - "\tdm9000ee read \n" - "\tword:\t\t00-02 : MAC Address\n" - "\t\t\t03-07 : DM9000 Configuration\n" - "\t\t\t08-63 : User data" -); diff --git a/configs/polaris_defconfig b/configs/polaris_defconfig deleted file mode 100644 index e209566..0000000 --- a/configs/polaris_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_TRIZEPSIV=y -CONFIG_SYS_EXTRA_OPTIONS="POLARIS" -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/trizepsiv_defconfig b/configs/trizepsiv_defconfig deleted file mode 100644 index 1887983..0000000 --- a/configs/trizepsiv_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_TRIZEPSIV=y -# CONFIG_CMD_SETEXPR is not set diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h deleted file mode 100644 index 40c8d71..0000000 --- a/include/configs/trizepsiv.h +++ /dev/null @@ -1,309 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefano Babic, DENX Gmbh, sbabic@denx.de - * - * (C) Copyright 2004 - * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net - * - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * Configuation settings for the LUBBOCK board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_CPU_PXA27X 1 /* This is an PXA27x CPU */ - -#define CONFIG_MMC 1 -#define CONFIG_BOARD_LATE_INIT -#define CONFIG_SYS_TEXT_BASE 0x0 - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF - -#define RTC - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ - -/* - * select serial console configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 /* we use FFUART on Conxs */ -#define CONFIG_BTUART 1 /* we use BTUART on Conxs */ -#define CONFIG_STUART 1 /* we use STUART on Conxs */ -#define CONFIG_CONS_INDEX 3 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 38400 - -#define CONFIG_DOS_PARTITION 1 - -/* - * Command line configuration. - */ -#define CONFIG_CMD_FAT -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ - -#undef CONFIG_SHOW_BOOT_PROGRESS - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_SERVERIP 192.168.1.99 -#define CONFIG_BOOTCOMMAND "run boot_flash" -#define CONFIG_BOOTARGS "console=ttyS0,38400 ramdisk_size=12288"\ - " rw root=/dev/ram initrd=0xa0800000,5m" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "program_boot_mmc=" \ - "mw.b 0xa0010000 0xff 0x20000; " \ - "if mmcinit && " \ - "fatload mmc 0 0xa0010000 u-boot.bin; " \ - "then " \ - "protect off 0x0 0x1ffff; " \ - "erase 0x0 0x1ffff; " \ - "cp.b 0xa0010000 0x0 0x20000; " \ - "fi\0" \ - "program_uzImage_mmc=" \ - "mw.b 0xa0010000 0xff 0x180000; " \ - "if mmcinit && " \ - "fatload mmc 0 0xa0010000 uzImage; " \ - "then " \ - "protect off 0x40000 0x1bffff; " \ - "erase 0x40000 0x1bffff; " \ - "cp.b 0xa0010000 0x40000 0x180000; " \ - "fi\0" \ - "program_ramdisk_mmc=" \ - "mw.b 0xa0010000 0xff 0x500000; " \ - "if mmcinit && " \ - "fatload mmc 0 0xa0010000 ramdisk.gz; " \ - "then " \ - "protect off 0x1c0000 0x6bffff; " \ - "erase 0x1c0000 0x6bffff; " \ - "cp.b 0xa0010000 0x1c0000 0x500000; " \ - "fi\0" \ - "boot_mmc=" \ - "if mmcinit && " \ - "fatload mmc 0 0xa0030000 uzImage && " \ - "fatload mmc 0 0xa0800000 ramdisk.gz; " \ - "then " \ - "bootm 0xa0030000; " \ - "fi\0" \ - "boot_flash=" \ - "cp.b 0x1c0000 0xa0800000 0x500000; " \ - "bootm 0x40000\0" \ - -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -/* #define CONFIG_INITRD_TAG 1 */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER 1 - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#undef CONFIG_SYS_PROMPT -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ -#else -#endif -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_DEVICE_NULLDEV 1 - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xa1000000 /* default load address */ - -#define CONFIG_SYS_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */ - -#ifdef CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_PXA_MMC_GENERIC -#define CONFIG_CMD_MMC -#define CONFIG_SYS_MMC_BASE 0xF0000000 -#endif - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ -#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 -#define CONFIG_SYS_DRAM_SIZE 0x04000000 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) - -/* - * GPIO settings - */ -#define CONFIG_SYS_GPSR0_VAL 0x00018000 -#define CONFIG_SYS_GPSR1_VAL 0x00000000 -#define CONFIG_SYS_GPSR2_VAL 0x400dc000 -#define CONFIG_SYS_GPSR3_VAL 0x00000000 -#define CONFIG_SYS_GPCR0_VAL 0x00000000 -#define CONFIG_SYS_GPCR1_VAL 0x00000000 -#define CONFIG_SYS_GPCR2_VAL 0x00000000 -#define CONFIG_SYS_GPCR3_VAL 0x00000000 -#define CONFIG_SYS_GPDR0_VAL 0x00018000 -#define CONFIG_SYS_GPDR1_VAL 0x00028801 -#define CONFIG_SYS_GPDR2_VAL 0x520dc000 -#define CONFIG_SYS_GPDR3_VAL 0x0001E000 -#define CONFIG_SYS_GAFR0_L_VAL 0x801c0000 -#define CONFIG_SYS_GAFR0_U_VAL 0x00000013 -#define CONFIG_SYS_GAFR1_L_VAL 0x6990100A -#define CONFIG_SYS_GAFR1_U_VAL 0x00000008 -#define CONFIG_SYS_GAFR2_L_VAL 0xA0000000 -#define CONFIG_SYS_GAFR2_U_VAL 0x010900F2 -#define CONFIG_SYS_GAFR3_L_VAL 0x54000003 -#define CONFIG_SYS_GAFR3_U_VAL 0x00002401 -#define CONFIG_SYS_GRER0_VAL 0x00000000 -#define CONFIG_SYS_GRER1_VAL 0x00000000 -#define CONFIG_SYS_GRER2_VAL 0x00000000 -#define CONFIG_SYS_GRER3_VAL 0x00000000 - -#define CONFIG_SYS_GFER1_VAL 0x00000000 -#define CONFIG_SYS_GFER3_VAL 0x00000020 - -#if CONFIG_POLARIS -#define CONFIG_SYS_GFER0_VAL 0x00000001 -#define CONFIG_SYS_GFER2_VAL 0x00200000 -#else -#define CONFIG_SYS_GFER0_VAL 0x00000000 -#define CONFIG_SYS_GFER2_VAL 0x00000000 -#endif - -#define CONFIG_SYS_PSSR_VAL 0x20 /* CHECK */ - -/* - * Clock settings - */ -#define CONFIG_SYS_CKEN 0x01FFFFFF /* CHECK */ -#define CONFIG_SYS_CCCR 0x02000290 /* 520Mhz */ - -/* - * Memory settings - */ - -#define CONFIG_SYS_MSC0_VAL 0x4df84df0 -#define CONFIG_SYS_MSC1_VAL 0x7ff87ff4 -#if CONFIG_POLARIS -#define CONFIG_SYS_MSC2_VAL 0xa2697ff8 -#else -#define CONFIG_SYS_MSC2_VAL 0xa26936d4 -#endif -#define CONFIG_SYS_MDCNFG_VAL 0x880009C9 -#define CONFIG_SYS_MDREFR_VAL 0x20ca201e -#define CONFIG_SYS_MDMRS_VAL 0x00220022 - -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x40044004 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000001 -#define CONFIG_SYS_MCMEM0_VAL 0x00004204 -#define CONFIG_SYS_MCMEM1_VAL 0x00010204 -#define CONFIG_SYS_MCATT0_VAL 0x00010504 -#define CONFIG_SYS_MCATT1_VAL 0x00010504 -#define CONFIG_SYS_MCIO0_VAL 0x00008407 -#define CONFIG_SYS_MCIO1_VAL 0x0000c108 - -#define CONFIG_DRIVER_DM9000 1 - -#if CONFIG_POLARIS -#define CONFIG_DM9000_BASE 0x0C800000 -#else -#define CONFIG_DM9000_BASE 0x08000000 -#endif - -#define DM9000_IO CONFIG_DM9000_BASE -#define DM9000_DATA (CONFIG_DM9000_BASE+0x8004) - -#define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_SYS_USB_OHCI_BOARD_INIT 1 -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3 -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "trizepsiv" -#define CONFIG_USB_STORAGE 1 -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 - -/* - * FLASH and environment organization - */ - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER 1 - -#define CONFIG_SYS_MONITOR_BASE 0 -#define CONFIG_SYS_MONITOR_LEN 0x40000 - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 4 + 255 /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/* write flash less slowly */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 - -/* Unlock to be used with Intel chips */ -#define CONFIG_SYS_FLASH_PROTECTION 1 - -/* Flash environment locations */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN) /* Addr of Environment Sector */ -#define CONFIG_ENV_SIZE 0x40000 /* Total Size of Environment */ -#define CONFIG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -#endif /* __CONFIG_H */ -- cgit v0.10.2