From b5e01eecc89e3e5c2ed3c17b803529be3c3702fb Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Tue, 10 Dec 2013 15:02:23 +0530 Subject: ARM: AM43xx: GP_EVM: Add support for DDR3 GP EVM has 1GB DDR3 attached(Part no: MT41K512M8RH). Adding details for the same. Below is the brief description of DDR3 init sequence(SW leveling): -> Enable VTT regulator -> Configure VTP -> Configure DDR IO settings -> Disable initialization and refreshes until EMIF registers are programmed. -> Program Timing registers -> Program leveling registers -> Program PHY control and Temp alert and ZQ config registers. -> Enable initialization and refreshes and configure SDRAM CONFIG register Signed-off-by: Lokesh Vutla diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/cpu/armv7/am33xx/ddr.c index 1abbb07..d05e666 100644 --- a/arch/arm/cpu/armv7/am33xx/ddr.c +++ b/arch/arm/cpu/armv7/am33xx/ddr.c @@ -97,8 +97,10 @@ void config_sdram_emif4d5(const struct emif_regs *regs, int nr) writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl); writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config); - configure_mr(nr, 0); - configure_mr(nr, 1); + if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2) { + configure_mr(nr, 0); + configure_mr(nr, 1); + } } /** diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c index 5a3f285..cd6289b 100644 --- a/arch/arm/cpu/armv7/omap-common/emif-common.c +++ b/arch/arm/cpu/armv7/omap-common/emif-common.c @@ -50,20 +50,6 @@ inline u32 emif_num(u32 base) return 0; } -/* - * Get SDRAM type connected to EMIF. - * Assuming similar SDRAM parts are connected to both EMIF's - * which is typically the case. So it is sufficient to get - * SDRAM type from EMIF1. - */ -u32 emif_sdram_type() -{ - struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE; - - return (readl(&emif->emif_sdram_config) & - EMIF_REG_SDRAM_TYPE_MASK) >> EMIF_REG_SDRAM_TYPE_SHIFT; -} - static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr) { u32 mr; diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h index 6af4b84..c1777df 100644 --- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h +++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h @@ -136,6 +136,14 @@ #define LPDDR2_DATA2_IOCTRL_VALUE 0x20000294 #define LPDDR2_DATA3_IOCTRL_VALUE 0x20000294 +#define DDR3_ADDRCTRL_WD0_IOCTRL_VALUE 0x00000000 +#define DDR3_ADDRCTRL_WD1_IOCTRL_VALUE 0x00000000 +#define DDR3_ADDRCTRL_IOCTRL_VALUE 0x84 +#define DDR3_DATA0_IOCTRL_VALUE 0x84 +#define DDR3_DATA1_IOCTRL_VALUE 0x84 +#define DDR3_DATA2_IOCTRL_VALUE 0x84 +#define DDR3_DATA3_IOCTRL_VALUE 0x84 + /** * Configure DMM */ diff --git a/arch/arm/include/asm/arch-am33xx/gpio.h b/arch/arm/include/asm/arch-am33xx/gpio.h index 13a047f..a1ffd49 100644 --- a/arch/arm/include/asm/arch-am33xx/gpio.h +++ b/arch/arm/include/asm/arch-am33xx/gpio.h @@ -13,4 +13,16 @@ #define AM33XX_GPIO2_BASE 0x481AC000 #define AM33XX_GPIO3_BASE 0x481AE000 +#define GPIO_22 22 + +/* GPIO CTRL register */ +#define GPIO_CTRL_DISABLEMODULE_SHIFT 0 +#define GPIO_CTRL_DISABLEMODULE_MASK (1 << 0) +#define GPIO_CTRL_ENABLEMODULE GPIO_CTRL_DISABLEMODULE_MASK + +/* GPIO OUTPUT ENABLE register */ +#define GPIO_OE_ENABLE(x) (1 << x) + +/* GPIO SETDATAOUT register */ +#define GPIO_SETDATAOUT(x) (1 << x) #endif /* _GPIO_AM33xx_H */ diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h index e68c113..45668ca 100644 --- a/arch/arm/include/asm/emif.h +++ b/arch/arm/include/asm/emif.h @@ -1160,6 +1160,20 @@ static inline u32 get_emif_rev(u32 base) >> EMIF_REG_MAJOR_REVISION_SHIFT; } +/* + * Get SDRAM type connected to EMIF. + * Assuming similar SDRAM parts are connected to both EMIF's + * which is typically the case. So it is sufficient to get + * SDRAM type from EMIF1. + */ +static inline u32 emif_sdram_type(void) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE; + + return (readl(&emif->emif_sdram_config) & + EMIF_REG_SDRAM_TYPE_MASK) >> EMIF_REG_SDRAM_TYPE_SHIFT; +} + /* assert macros */ #if defined(DEBUG) #define emif_assert(c) ({ if (!(c)) for (;;); }) diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c index 5a013e3..ed87cd9 100644 --- a/board/ti/am43xx/board.c +++ b/board/ti/am43xx/board.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include "board.h" @@ -179,10 +180,70 @@ const u32 ext_phy_ctrl_const_base_lpddr2[] = { 0x08102040 }; +const struct ctrl_ioregs ioregs_ddr3 = { + .cm0ioctl = DDR3_ADDRCTRL_IOCTRL_VALUE, + .cm1ioctl = DDR3_ADDRCTRL_WD0_IOCTRL_VALUE, + .cm2ioctl = DDR3_ADDRCTRL_WD1_IOCTRL_VALUE, + .dt0ioctl = DDR3_DATA0_IOCTRL_VALUE, + .dt1ioctl = DDR3_DATA0_IOCTRL_VALUE, + .dt2ioctrl = DDR3_DATA0_IOCTRL_VALUE, + .dt3ioctrl = DDR3_DATA0_IOCTRL_VALUE, + .emif_sdram_config_ext = 0x0043, +}; + +const struct emif_regs ddr3_emif_regs_400Mhz = { + .sdram_config = 0x638413B2, + .ref_ctrl = 0x00000C30, + .sdram_tim1 = 0xEAAAD4DB, + .sdram_tim2 = 0x266B7FDA, + .sdram_tim3 = 0x107F8678, + .read_idle_ctrl = 0x00050000, + .zq_config = 0x50074BE4, + .temp_alert_config = 0x0, + .emif_ddr_phy_ctlr_1 = 0x0E084008, + .emif_ddr_ext_phy_ctrl_1 = 0x08020080, + .emif_ddr_ext_phy_ctrl_2 = 0x00400040, + .emif_ddr_ext_phy_ctrl_3 = 0x00400040, + .emif_ddr_ext_phy_ctrl_4 = 0x00400040, + .emif_ddr_ext_phy_ctrl_5 = 0x00400040, + .emif_rd_wr_lvl_rmp_win = 0x0, + .emif_rd_wr_lvl_rmp_ctl = 0x0, + .emif_rd_wr_lvl_ctl = 0x0, + .emif_rd_wr_exec_thresh = 0x00000405 +}; + +const u32 ext_phy_ctrl_const_base_ddr3[] = { + 0x00400040, + 0x00350035, + 0x00350035, + 0x00350035, + 0x00350035, + 0x00350035, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00340034, + 0x00340034, + 0x00340034, + 0x00340034, + 0x00340034, + 0x0, + 0x0, + 0x40000000, + 0x08102040 +}; + void emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32 *size) { - *regs = ext_phy_ctrl_const_base_lpddr2; - *size = ARRAY_SIZE(ext_phy_ctrl_const_base_lpddr2); + if (board_is_eposevm()) { + *regs = ext_phy_ctrl_const_base_lpddr2; + *size = ARRAY_SIZE(ext_phy_ctrl_const_base_lpddr2); + } else if (board_is_gpevm()) { + *regs = ext_phy_ctrl_const_base_ddr3; + *size = ARRAY_SIZE(ext_phy_ctrl_const_base_ddr3); + } return; } @@ -280,9 +341,35 @@ void set_mux_conf_regs(void) enable_board_pin_mux(); } +static void enable_vtt_regulator(void) +{ + u32 temp; + + /* enable module */ + writel(GPIO_CTRL_ENABLEMODULE, AM33XX_GPIO0_BASE + OMAP_GPIO_CTRL); + + /* enable output for GPIO0_22 */ + writel(GPIO_SETDATAOUT(GPIO_22), + AM33XX_GPIO0_BASE + OMAP_GPIO_SETDATAOUT); + temp = readl(AM33XX_GPIO0_BASE + OMAP_GPIO_OE); + temp = temp & ~(GPIO_OE_ENABLE(GPIO_22)); + writel(temp, AM33XX_GPIO0_BASE + OMAP_GPIO_OE); +} + void sdram_init(void) { - config_ddr(0, &ioregs_lpddr2, NULL, NULL, &emif_regs_lpddr2, 0); + /* + * EPOS EVM has 1GB LPDDR2 connected to EMIF. + * GP EMV has 1GB DDR3 connected to EMIF + * along with VTT regulator. + */ + if (board_is_eposevm()) { + config_ddr(0, &ioregs_lpddr2, NULL, NULL, &emif_regs_lpddr2, 0); + } else if (board_is_gpevm()) { + enable_vtt_regulator(); + config_ddr(0, &ioregs_ddr3, NULL, NULL, + &ddr3_emif_regs_400Mhz, 0); + } } #endif diff --git a/board/ti/am43xx/mux.c b/board/ti/am43xx/mux.c index a2d72dd..810b194 100644 --- a/board/ti/am43xx/mux.c +++ b/board/ti/am43xx/mux.c @@ -33,6 +33,11 @@ static struct module_pin_mux i2c0_pin_mux[] = { {-1}, }; +static struct module_pin_mux gpio0_22_pin_mux[] = { + {OFFSET(ddr_ba2), (MODE(9) | PULLUP_EN)}, /* GPIO0_22 */ + {-1}, +}; + void enable_uart0_pin_mux(void) { configure_module_pin_mux(uart0_pin_mux); @@ -42,6 +47,9 @@ void enable_board_pin_mux(void) { configure_module_pin_mux(mmc0_pin_mux); configure_module_pin_mux(i2c0_pin_mux); + + if (board_is_gpevm()) + configure_module_pin_mux(gpio0_22_pin_mux); } void enable_i2c0_pin_mux(void) -- cgit v0.10.2