From c51c1c9af95ff4fa365024e4d815576e818c51aa Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 20 Jun 2014 13:54:54 +0900 Subject: mpc8xx: remove netta, netta2, netphone board support These boards are old enough and have no maintainers. Signed-off-by: Masahiro Yamada diff --git a/arch/powerpc/cpu/mpc8xx/fec.c b/arch/powerpc/cpu/mpc8xx/fec.c index 65dfeab..ccb460e 100644 --- a/arch/powerpc/cpu/mpc8xx/fec.c +++ b/arch/powerpc/cpu/mpc8xx/fec.c @@ -377,26 +377,6 @@ static void fec_pin_init(int fecidx) */ immr->im_cpm.cp_fec1.fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1; -#if defined(CONFIG_NETTA) || defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2) - { - volatile fec_t *fecp; - - /* - * only two FECs please - */ - if ((unsigned int)fecidx >= 2) - hang(); - - if (fecidx == 0) - fecp = &immr->im_cpm.cp_fec1; - else - fecp = &immr->im_cpm.cp_fec2; - - /* our PHYs are the limit at 2.5 MHz */ - fecp->fec_mii_speed <<= 1; - } -#endif - #if defined(CONFIG_MPC885_FAMILY) && defined(WANT_MII) /* use MDC for MII */ immr->im_ioport.iop_pdpar |= 0x0080; diff --git a/board/netphone/Makefile b/board/netphone/Makefile deleted file mode 100644 index ba34605..0000000 --- a/board/netphone/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = netphone.o flash.o phone_console.o diff --git a/board/netphone/flash.c b/board/netphone/flash.c deleted file mode 100644 index 91bd968..0000000 --- a/board/netphone/flash.c +++ /dev/null @@ -1,513 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size(vu_long * addr, flash_info_t * info); -static int write_byte(flash_info_t * info, ulong dest, uchar data); -static void flash_get_offsets(ulong base, flash_info_t * info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init(void) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - unsigned long size; -#if CONFIG_NETPHONE_VERSION == 2 - unsigned long size1; -#endif - int i; - - /* Init: no FLASHes known */ - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) - flash_info[i].flash_id = FLASH_UNKNOWN; - - size = flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size, size << 20); - } - - /* Remap FLASH according to real size */ - memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000); - memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | (memctl->memc_br0 & ~(BR_BA_MSK)); - - /* Re-do sizing to get full correct info */ - size = flash_get_size((vu_long *) CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_get_offsets(CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0]); - - flash_protect ( FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[0]); - -#ifdef CONFIG_ENV_ADDR_REDUND - flash_protect ( FLAG_PROTECT_SET, - CONFIG_ENV_ADDR_REDUND, - CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[0]); -#endif - - flash_info[0].size = size; - -#if CONFIG_NETPHONE_VERSION == 2 - size1 = flash_get_size((vu_long *) FLASH_BASE4_PRELIM, &flash_info[1]); - if (size1 > 0) { - if (flash_info[1].flash_id == FLASH_UNKNOWN) - printf("## Unknown FLASH on Bank 1 - Size = 0x%08lx = %ld MB\n", size1, size1 << 20); - - /* Remap FLASH according to real size */ - memctl->memc_or4 = CONFIG_SYS_OR_TIMING_FLASH | (-size1 & 0xFFFF8000); - memctl->memc_br4 = (CONFIG_SYS_FLASH_BASE4 & BR_BA_MSK) | (memctl->memc_br4 & ~(BR_BA_MSK)); - - /* Re-do sizing to get full correct info */ - size1 = flash_get_size((vu_long *) CONFIG_SYS_FLASH_BASE4, &flash_info[1]); - - flash_get_offsets(CONFIG_SYS_FLASH_BASE4, &flash_info[1]); - - size += size1; - } else - memctl->memc_br4 &= ~BR_V; -#endif - - return (size); -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets(ulong base, flash_info_t * info) -{ - int i; - - /* set up sector start address table */ - if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) { - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00010000); - } - } else if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00010000) - 0x00030000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00010000; - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info(flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - printf("AMD "); - break; - case FLASH_MAN_FUJ: - printf("FUJITSU "); - break; - case FLASH_MAN_MX: - printf("MXIC "); - break; - default: - printf("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM040: - printf("AM29LV040B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400B: - printf("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: - printf("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: - printf("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: - printf("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: - printf("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: - printf("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: - printf("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: - printf("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - default: - printf("Unknown Chip Type\n"); - break; - } - - printf(" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count); - - printf(" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf("\n "); - printf(" %08lX%s", info->start[i], info->protect[i] ? " (RO)" : " "); - } - printf("\n"); -} - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -static ulong flash_get_size(vu_long * addr, flash_info_t * info) -{ - short i; - uchar mid; - uchar pid; - vu_char *caddr = (vu_char *) addr; - ulong base = (ulong) addr; - - /* Write auto select command: read Manufacturer ID */ - caddr[0x0555] = 0xAA; - caddr[0x02AA] = 0x55; - caddr[0x0555] = 0x90; - - mid = caddr[0]; - switch (mid) { - case (AMD_MANUFACT & 0xFF): - info->flash_id = FLASH_MAN_AMD; - break; - case (FUJ_MANUFACT & 0xFF): - info->flash_id = FLASH_MAN_FUJ; - break; - case (MX_MANUFACT & 0xFF): - info->flash_id = FLASH_MAN_MX; - break; - case (STM_MANUFACT & 0xFF): - info->flash_id = FLASH_MAN_STM; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - pid = caddr[1]; /* device ID */ - switch (pid) { - case (AMD_ID_LV400T & 0xFF): - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00080000; - break; /* => 512 kB */ - - case (AMD_ID_LV400B & 0xFF): - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00080000; - break; /* => 512 kB */ - - case (AMD_ID_LV800T & 0xFF): - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (AMD_ID_LV800B & 0xFF): - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (AMD_ID_LV160T & 0xFF): - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (AMD_ID_LV160B & 0xFF): - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (AMD_ID_LV040B & 0xFF): - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x00080000; - break; - - case (STM_ID_M29W040B & 0xFF): - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x00080000; - break; - -#if 0 /* enable when device IDs are available */ - case (AMD_ID_LV320T & 0xFF): - info->flash_id += FLASH_AM320T; - info->sector_count = 67; - info->size = 0x00400000; - break; /* => 4 MB */ - - case (AMD_ID_LV320B & 0xFF): - info->flash_id += FLASH_AM320B; - info->sector_count = 67; - info->size = 0x00400000; - break; /* => 4 MB */ -#endif - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - - printf(" "); - /* set up sector start address table */ - if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) { - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00010000); - } - } else if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00010000) - 0x00030000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00010000; - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection: D0 = 1 if protected */ - caddr = (volatile unsigned char *)(info->start[i]); - info->protect[i] = caddr[2] & 1; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - caddr = (vu_char *) info->start[0]; - - caddr[0x0555] = 0xAA; - caddr[0x02AA] = 0x55; - caddr[0x0555] = 0xF0; - - udelay(20000); - } - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase(flash_info_t * info, int s_first, int s_last) -{ - vu_char *addr = (vu_char *) (info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf("- missing\n"); - } else { - printf("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf("Can't erase unknown flash type %08lx - aborted\n", info->flash_id); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf("- Warning: %d protected sectors will not be erased!\n", prot); - } else { - printf("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0xAA; - addr[0x02AA] = 0x55; - addr[0x0555] = 0x80; - addr[0x0555] = 0xAA; - addr[0x02AA] = 0x55; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (vu_char *) (info->start[sect]); - addr[0] = 0x30; - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay(1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer(0); - last = start; - addr = (vu_char *) (info->start[l_sect]); - while ((addr[0] & 0x80) != 0x80) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc('.'); - last = now; - } - } - -DONE: - /* reset to read mode */ - addr = (vu_char *) info->start[0]; - addr[0] = 0xF0; /* reset bank */ - - printf(" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - int rc; - - while (cnt > 0) { - if ((rc = write_byte(info, addr++, *src++)) != 0) { - return (rc); - } - --cnt; - } - - return (0); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_byte(flash_info_t * info, ulong dest, uchar data) -{ - vu_char *addr = (vu_char *) (info->start[0]); - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_char *) dest) & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0xAA; - addr[0x02AA] = 0x55; - addr[0x0555] = 0xA0; - - *((vu_char *) dest) = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer(0); - while ((*((vu_char *) dest) & 0x80) != (data & 0x80)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} diff --git a/board/netphone/netphone.c b/board/netphone/netphone.c deleted file mode 100644 index 8ff4489..0000000 --- a/board/netphone/netphone.c +++ /dev/null @@ -1,690 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Pantelis Antoniou, Intracom S.A., panto@intracom.gr - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Pantelis Antoniou, Intracom S.A., panto@intracom.gr - * U-Boot port on NetTA4 board - */ - -#include -#include -#include -#include - -#include "mpc8xx.h" - -#ifdef CONFIG_HW_WATCHDOG -#include -#endif - -int fec8xx_miiphy_read(char *devname, unsigned char addr, - unsigned char reg, unsigned short *value); -int fec8xx_miiphy_write(char *devname, unsigned char addr, - unsigned char reg, unsigned short value); - -/****************************************************************/ - -/* some sane bit macros */ -#define _BD(_b) (1U << (31-(_b))) -#define _BDR(_l, _h) (((((1U << (31-(_l))) - 1) << 1) | 1) & ~((1U << (31-(_h))) - 1)) - -#define _BW(_b) (1U << (15-(_b))) -#define _BWR(_l, _h) (((((1U << (15-(_l))) - 1) << 1) | 1) & ~((1U << (15-(_h))) - 1)) - -#define _BB(_b) (1U << (7-(_b))) -#define _BBR(_l, _h) (((((1U << (7-(_l))) - 1) << 1) | 1) & ~((1U << (7-(_h))) - 1)) - -#define _B(_b) _BD(_b) -#define _BR(_l, _h) _BDR(_l, _h) - -/****************************************************************/ - -/* - * Check Board Identity: - * - * Return 1 always. - */ - -int checkboard(void) -{ - printf ("Intracom NetPhone V%d\n", CONFIG_NETPHONE_VERSION); - return (0); -} - -/****************************************************************/ - -#define _NOT_USED_ 0xFFFFFFFF - -/****************************************************************/ - -#define CS_0000 0x00000000 -#define CS_0001 0x10000000 -#define CS_0010 0x20000000 -#define CS_0011 0x30000000 -#define CS_0100 0x40000000 -#define CS_0101 0x50000000 -#define CS_0110 0x60000000 -#define CS_0111 0x70000000 -#define CS_1000 0x80000000 -#define CS_1001 0x90000000 -#define CS_1010 0xA0000000 -#define CS_1011 0xB0000000 -#define CS_1100 0xC0000000 -#define CS_1101 0xD0000000 -#define CS_1110 0xE0000000 -#define CS_1111 0xF0000000 - -#define BS_0000 0x00000000 -#define BS_0001 0x01000000 -#define BS_0010 0x02000000 -#define BS_0011 0x03000000 -#define BS_0100 0x04000000 -#define BS_0101 0x05000000 -#define BS_0110 0x06000000 -#define BS_0111 0x07000000 -#define BS_1000 0x08000000 -#define BS_1001 0x09000000 -#define BS_1010 0x0A000000 -#define BS_1011 0x0B000000 -#define BS_1100 0x0C000000 -#define BS_1101 0x0D000000 -#define BS_1110 0x0E000000 -#define BS_1111 0x0F000000 - -#define GPL0_AAAA 0x00000000 -#define GPL0_AAA0 0x00200000 -#define GPL0_AAA1 0x00300000 -#define GPL0_000A 0x00800000 -#define GPL0_0000 0x00A00000 -#define GPL0_0001 0x00B00000 -#define GPL0_111A 0x00C00000 -#define GPL0_1110 0x00E00000 -#define GPL0_1111 0x00F00000 - -#define GPL1_0000 0x00000000 -#define GPL1_0001 0x00040000 -#define GPL1_1110 0x00080000 -#define GPL1_1111 0x000C0000 - -#define GPL2_0000 0x00000000 -#define GPL2_0001 0x00010000 -#define GPL2_1110 0x00020000 -#define GPL2_1111 0x00030000 - -#define GPL3_0000 0x00000000 -#define GPL3_0001 0x00004000 -#define GPL3_1110 0x00008000 -#define GPL3_1111 0x0000C000 - -#define GPL4_0000 0x00000000 -#define GPL4_0001 0x00001000 -#define GPL4_1110 0x00002000 -#define GPL4_1111 0x00003000 - -#define GPL5_0000 0x00000000 -#define GPL5_0001 0x00000400 -#define GPL5_1110 0x00000800 -#define GPL5_1111 0x00000C00 -#define LOOP 0x00000080 - -#define EXEN 0x00000040 - -#define AMX_COL 0x00000000 -#define AMX_ROW 0x00000020 -#define AMX_MAR 0x00000030 - -#define NA 0x00000008 - -#define UTA 0x00000004 - -#define TODT 0x00000002 - -#define LAST 0x00000001 - -#define A10_AAAA GPL0_AAAA -#define A10_AAA0 GPL0_AAA0 -#define A10_AAA1 GPL0_AAA1 -#define A10_000A GPL0_000A -#define A10_0000 GPL0_0000 -#define A10_0001 GPL0_0001 -#define A10_111A GPL0_111A -#define A10_1110 GPL0_1110 -#define A10_1111 GPL0_1111 - -#define RAS_0000 GPL1_0000 -#define RAS_0001 GPL1_0001 -#define RAS_1110 GPL1_1110 -#define RAS_1111 GPL1_1111 - -#define CAS_0000 GPL2_0000 -#define CAS_0001 GPL2_0001 -#define CAS_1110 GPL2_1110 -#define CAS_1111 GPL2_1111 - -#define WE_0000 GPL3_0000 -#define WE_0001 GPL3_0001 -#define WE_1110 GPL3_1110 -#define WE_1111 GPL3_1111 - -/* #define CAS_LATENCY 3 */ -#define CAS_LATENCY 2 - -const uint sdram_table[0x40] = { - -#if CAS_LATENCY == 3 - /* RSS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_0000 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */ - CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */ - _NOT_USED_, _NOT_USED_, - - /* RBS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_0001 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */ - CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL, /* PALL */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | TODT | LAST, /* NOP */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* WSS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_0000 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL | UTA, /* WRITE */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* WBS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL, /* WRITE */ - CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0001 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, -#endif - -#if CAS_LATENCY == 2 - /* RSS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_0001 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */ - CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL, /* NOP */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, - - /* RBS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */ - CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0001 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL, /* NOP */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* WSS */ - CS_0001 | BS_1111 | A10_AAA0 | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL, /* NOP */ - CS_0000 | BS_0001 | A10_0001 | RAS_1110 | CAS_0001 | WE_0000 | AMX_COL | UTA, /* WRITE */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, - _NOT_USED_, - - /* WBS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL, /* NOP */ - CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0001 | AMX_COL, /* WRITE */ - CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1110 | BS_0001 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL | UTA, /* NOP */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, - -#endif - - /* UPT */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_0001 | WE_1111 | AMX_COL | UTA | LOOP, /* ATRFR */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | LOOP, /* NOP */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, - - /* EXC */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | LAST, - _NOT_USED_, - - /* REG */ - CS_1110 | BS_1111 | A10_1110 | RAS_1110 | CAS_1110 | WE_1110 | AMX_MAR | UTA, - CS_0001 | BS_1111 | A10_0001 | RAS_0001 | CAS_0001 | WE_0001 | AMX_MAR | UTA | LAST, -}; - -#if CONFIG_NETPHONE_VERSION == 2 -static const uint nandcs_table[0x40] = { - /* RSS */ - CS_1000 | GPL4_1111 | GPL5_1111 | UTA, - CS_0000 | GPL4_1110 | GPL5_1111 | UTA, - CS_0000 | GPL4_0000 | GPL5_1111 | UTA, - CS_0000 | GPL4_0000 | GPL5_1111 | UTA, - CS_0000 | GPL4_0000 | GPL5_1111, - CS_0000 | GPL4_0001 | GPL5_1111 | UTA, - CS_0000 | GPL4_1111 | GPL5_1111 | UTA, - CS_0011 | GPL4_1111 | GPL5_1111 | UTA | LAST, /* NOP */ - - /* RBS */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* WSS */ - CS_1000 | GPL4_1111 | GPL5_1110 | UTA, - CS_0000 | GPL4_1111 | GPL5_0000 | UTA, - CS_0000 | GPL4_1111 | GPL5_0000 | UTA, - CS_0000 | GPL4_1111 | GPL5_0000 | UTA, - CS_0000 | GPL4_1111 | GPL5_0001 | UTA, - CS_0000 | GPL4_1111 | GPL5_1111 | UTA, - CS_0000 | GPL4_1111 | GPL5_1111, - CS_0011 | GPL4_1111 | GPL5_1111 | UTA | LAST, - - /* WBS */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* UPT */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* EXC */ - CS_0001 | LAST, - _NOT_USED_, - - /* REG */ - CS_1110 , - CS_0001 | LAST, -}; -#endif - -/* 0xC8 = 0b11001000 , CAS3, >> 2 = 0b00 11 0 010 */ -/* 0x88 = 0b10001000 , CAS2, >> 2 = 0b00 10 0 010 */ -#define MAR_SDRAM_INIT ((CAS_LATENCY << 6) | 0x00000008LU) - -/* 8 */ -#define CONFIG_SYS_MAMR ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -void check_ram(unsigned int addr, unsigned int size) -{ - unsigned int i, j, v, vv; - volatile unsigned int *p; - unsigned int pv; - - p = (unsigned int *)addr; - pv = (unsigned int)p; - for (i = 0; i < size / sizeof(unsigned int); i++, pv += sizeof(unsigned int)) - *p++ = pv; - - p = (unsigned int *)addr; - for (i = 0; i < size / sizeof(unsigned int); i++) { - v = (unsigned int)p; - vv = *p; - if (vv != v) { - printf("%p: read %08x instead of %08x\n", p, vv, v); - hang(); - } - p++; - } - - for (j = 0; j < 5; j++) { - switch (j) { - case 0: v = 0x00000000; break; - case 1: v = 0xffffffff; break; - case 2: v = 0x55555555; break; - case 3: v = 0xaaaaaaaa; break; - default:v = 0xdeadbeef; break; - } - p = (unsigned int *)addr; - for (i = 0; i < size / sizeof(unsigned int); i++) { - *p = v; - vv = *p; - if (vv != v) { - printf("%p: read %08x instead of %08x\n", p, vv, v); - hang(); - } - *p = ~v; - p++; - } - } -} - -phys_size_t initdram(int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size; - - upmconfig(UPMB, (uint *) sdram_table, sizeof(sdram_table) / sizeof(sdram_table[0])); - - /* - * Preliminary prescaler for refresh - */ - memctl->memc_mptpr = MPTPR_PTP_DIV8; - - memctl->memc_mar = MAR_SDRAM_INIT; /* 32-bit address to be output on the address bus if AMX = 0b11 */ - - /* - * Map controller bank 3 to the SDRAM bank at preliminary address. - */ - memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM; - memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM; - - memctl->memc_mbmr = CONFIG_SYS_MAMR & ~MAMR_PTAE; /* no refresh yet */ - - udelay(200); - - /* perform SDRAM initialisation sequence */ - memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x3C); /* precharge all */ - udelay(1); - - memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(2) | MCR_MAD(0x30); /* refresh 2 times(0) */ - udelay(1); - - memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x3E); /* exception program (write mar)*/ - udelay(1); - - memctl->memc_mbmr |= MAMR_PTAE; /* enable refresh */ - - udelay(10000); - - { - u32 d1, d2; - - d1 = 0xAA55AA55; - *(volatile u32 *)0 = d1; - d2 = *(volatile u32 *)0; - if (d1 != d2) { - printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2); - hang(); - } - - d1 = 0x55AA55AA; - *(volatile u32 *)0 = d1; - d2 = *(volatile u32 *)0; - if (d1 != d2) { - printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2); - hang(); - } - } - - size = get_ram_size((long *)0, SDRAM_MAX_SIZE); - - if (size == 0) { - printf("SIZE is zero: LOOP on 0\n"); - for (;;) { - *(volatile u32 *)0 = 0; - (void)*(volatile u32 *)0; - } - } - - return size; -} - -/* ------------------------------------------------------------------------- */ - -void reset_phys(void) -{ - int phyno; - unsigned short v; - - udelay(10000); - /* reset the damn phys */ - mii_init(); - - for (phyno = 0; phyno < 32; ++phyno) { - fec8xx_miiphy_read(NULL, phyno, MII_PHYSID1, &v); - if (v == 0xFFFF) - continue; - fec8xx_miiphy_write(NULL, phyno, MII_BMCR, BMCR_PDOWN); - udelay(10000); - fec8xx_miiphy_write(NULL, phyno, MII_BMCR, - BMCR_RESET | BMCR_ANENABLE); - udelay(10000); - } -} - -/* ------------------------------------------------------------------------- */ - -/* GP = general purpose, SP = special purpose (on chip peripheral) */ - -/* bits that can have a special purpose or can be configured as inputs/outputs */ -#define PA_GP_INMASK 0 -#define PA_GP_OUTMASK (_BW(3) | _BW(7) | _BW(10) | _BW(14) | _BW(15)) -#define PA_SP_MASK 0 -#define PA_ODR_VAL 0 -#define PA_GP_OUTVAL (_BW(3) | _BW(14) | _BW(15)) -#define PA_SP_DIRVAL 0 - -#define PB_GP_INMASK _B(28) -#define PB_GP_OUTMASK (_B(19) | _B(23) | _B(26) | _B(27) | _B(29) | _B(30)) -#define PB_SP_MASK (_BR(22, 25)) -#define PB_ODR_VAL 0 -#define PB_GP_OUTVAL (_B(26) | _B(27) | _B(29) | _B(30)) -#define PB_SP_DIRVAL 0 - -#if CONFIG_NETPHONE_VERSION == 1 -#define PC_GP_INMASK _BW(12) -#define PC_GP_OUTMASK (_BW(10) | _BW(11) | _BW(13) | _BW(15)) -#elif CONFIG_NETPHONE_VERSION == 2 -#define PC_GP_INMASK (_BW(13) | _BW(15)) -#define PC_GP_OUTMASK (_BW(10) | _BW(11) | _BW(12)) -#endif -#define PC_SP_MASK 0 -#define PC_SOVAL 0 -#define PC_INTVAL 0 -#define PC_GP_OUTVAL (_BW(10) | _BW(11)) -#define PC_SP_DIRVAL 0 - -#if CONFIG_NETPHONE_VERSION == 1 -#define PE_GP_INMASK _B(31) -#define PE_GP_OUTMASK (_B(17) | _B(18) |_B(20) | _B(24) | _B(27) | _B(28) | _B(29) | _B(30)) -#define PE_GP_OUTVAL (_B(20) | _B(24) | _B(27) | _B(28)) -#elif CONFIG_NETPHONE_VERSION == 2 -#define PE_GP_INMASK _BR(28, 31) -#define PE_GP_OUTMASK (_B(17) | _B(18) |_B(20) | _B(24) | _B(27)) -#define PE_GP_OUTVAL (_B(20) | _B(24) | _B(27)) -#endif -#define PE_SP_MASK 0 -#define PE_ODR_VAL 0 -#define PE_SP_DIRVAL 0 - -int board_early_init_f(void) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile iop8xx_t *ioport = &immap->im_ioport; - volatile cpm8xx_t *cpm = &immap->im_cpm; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - /* NAND chip select */ -#if CONFIG_NETPHONE_VERSION == 1 - memctl->memc_or1 = ((0xFFFFFFFFLU & ~(NAND_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_8_CLK | OR_EHTR | OR_TRLX); - memctl->memc_br1 = ((NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_V); -#elif CONFIG_NETPHONE_VERSION == 2 - upmconfig(UPMA, (uint *) nandcs_table, sizeof(nandcs_table) / sizeof(nandcs_table[0])); - memctl->memc_or1 = ((0xFFFFFFFFLU & ~(NAND_SIZE - 1)) | OR_BI | OR_G5LS); - memctl->memc_br1 = ((NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_V | BR_MS_UPMA); - memctl->memc_mamr = 0; /* all clear */ -#endif - - /* DSP chip select */ - memctl->memc_or2 = ((0xFFFFFFFFLU & ~(DSP_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_ACS_DIV2 | OR_SETA | OR_TRLX); - memctl->memc_br2 = ((DSP_BASE & BR_BA_MSK) | BR_PS_16 | BR_V); - -#if CONFIG_NETPHONE_VERSION == 1 - memctl->memc_br4 &= ~BR_V; -#endif - memctl->memc_br5 &= ~BR_V; - memctl->memc_br6 &= ~BR_V; - memctl->memc_br7 &= ~BR_V; - - ioport->iop_padat = PA_GP_OUTVAL; - ioport->iop_paodr = PA_ODR_VAL; - ioport->iop_padir = PA_GP_OUTMASK | PA_SP_DIRVAL; - ioport->iop_papar = PA_SP_MASK; - - cpm->cp_pbdat = PB_GP_OUTVAL; - cpm->cp_pbodr = PB_ODR_VAL; - cpm->cp_pbdir = PB_GP_OUTMASK | PB_SP_DIRVAL; - cpm->cp_pbpar = PB_SP_MASK; - - ioport->iop_pcdat = PC_GP_OUTVAL; - ioport->iop_pcdir = PC_GP_OUTMASK | PC_SP_DIRVAL; - ioport->iop_pcso = PC_SOVAL; - ioport->iop_pcint = PC_INTVAL; - ioport->iop_pcpar = PC_SP_MASK; - - cpm->cp_pedat = PE_GP_OUTVAL; - cpm->cp_peodr = PE_ODR_VAL; - cpm->cp_pedir = PE_GP_OUTMASK | PE_SP_DIRVAL; - cpm->cp_pepar = PE_SP_MASK; - - return 0; -} - -#ifdef CONFIG_HW_WATCHDOG - -void hw_watchdog_reset(void) -{ - /* XXX add here the really funky stuff */ -} - -#endif - -#ifdef CONFIG_SHOW_ACTIVITY - -static volatile int left_to_poll = PHONE_CONSOLE_POLL_HZ; /* poll */ - -/* called from timer interrupt every 1/CONFIG_SYS_HZ sec */ -void board_show_activity(ulong timestamp) -{ - if (left_to_poll > -PHONE_CONSOLE_POLL_HZ) - --left_to_poll; -} - -extern void phone_console_do_poll(void); - -static void do_poll(void) -{ - unsigned int base; - - while (left_to_poll <= 0) { - phone_console_do_poll(); - base = left_to_poll + PHONE_CONSOLE_POLL_HZ; - do { - left_to_poll = base; - } while (base != left_to_poll); - } -} - -/* called when looping */ -void show_activity(int arg) -{ - do_poll(); -} - -#endif - -#if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE) -int overwrite_console(void) -{ - /* printf("overwrite_console called\n"); */ - return 0; -} -#endif - -extern int drv_phone_init(void); -extern int drv_phone_use_me(void); -extern int drv_phone_is_idle(void); - -int misc_init_r(void) -{ - return drv_phone_init(); -} - -int last_stage_init(void) -{ - int i; - -#if CONFIG_NETPHONE_VERSION == 2 - /* assert peripheral reset */ - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat &= ~_BW(12); - for (i = 0; i < 10; i++) - udelay(1000); - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat |= _BW(12); -#endif - reset_phys(); - - /* check in order to enable the local console */ - left_to_poll = PHONE_CONSOLE_POLL_HZ; - i = CONFIG_SYS_HZ * 2; - while (i > 0) { - - if (tstc()) { - getc(); - break; - } - - do_poll(); - - if (drv_phone_use_me()) { - status_led_set(0, STATUS_LED_ON); - while (!drv_phone_is_idle()) { - do_poll(); - udelay(1000000 / CONFIG_SYS_HZ); - } - - console_assign(stdin, "phone"); - console_assign(stdout, "phone"); - console_assign(stderr, "phone"); - setenv("bootdelay", "-1"); - break; - } - - udelay(1000000 / CONFIG_SYS_HZ); - i--; - left_to_poll--; - } - left_to_poll = PHONE_CONSOLE_POLL_HZ; - - return 0; -} diff --git a/board/netphone/phone_console.c b/board/netphone/phone_console.c deleted file mode 100644 index d195a39..0000000 --- a/board/netphone/phone_console.c +++ /dev/null @@ -1,1128 +0,0 @@ -/* - * (C) Copyright 2004 Intracom S.A. - * Pantelis Antoniou - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * phone_console.c - * - * A phone based console - * - * Virtual display of 80x24 characters. - * The actual display is much smaller and panned to show the virtual one. - * Input is made by a numeric keypad utilizing the input method of - * mobile phones. Sorry no T9 lexicons... - * - */ - -#include - -#include -#include -#include - -#include - -/*************************************************************************************************/ - -#define ROWS 24 -#define COLS 80 - -#define REFRESH_HZ (CONFIG_SYS_HZ/50) /* refresh every 20ms */ -#define BLINK_HZ (CONFIG_SYS_HZ/2) /* cursor blink every 500ms */ - -/*************************************************************************************************/ - -#define DISPLAY_BACKLIT_PORT ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat -#define DISPLAY_BACKLIT_MASK 0x0010 - -/*************************************************************************************************/ - -#define KP_STABLE_HZ (CONFIG_SYS_HZ/100) /* stable for 10ms */ -#define KP_REPEAT_DELAY_HZ (CONFIG_SYS_HZ/4) /* delay before repeat 250ms */ -#define KP_REPEAT_HZ (CONFIG_SYS_HZ/20) /* repeat every 50ms */ -#define KP_FORCE_DELAY_HZ (CONFIG_SYS_HZ/2) /* key was force pressed */ -#define KP_IDLE_DELAY_HZ (CONFIG_SYS_HZ/2) /* key was released and idle */ - -#if CONFIG_NETPHONE_VERSION == 1 -#define KP_SPI_RXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat) -#define KP_SPI_RXD_MASK 0x0008 - -#define KP_SPI_TXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat) -#define KP_SPI_TXD_MASK 0x0004 - -#define KP_SPI_CLK_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat) -#define KP_SPI_CLK_MASK 0x0001 -#elif CONFIG_NETPHONE_VERSION == 2 -#define KP_SPI_RXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat) -#define KP_SPI_RXD_MASK 0x00000008 - -#define KP_SPI_TXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat) -#define KP_SPI_TXD_MASK 0x00000004 - -#define KP_SPI_CLK_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat) -#define KP_SPI_CLK_MASK 0x00000002 -#endif - -#define KP_CS_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) -#define KP_CS_MASK 0x00000010 - -#define KP_SPI_RXD() (KP_SPI_RXD_PORT & KP_SPI_RXD_MASK) - -#define KP_SPI_TXD(x) \ - do { \ - if (x) \ - KP_SPI_TXD_PORT |= KP_SPI_TXD_MASK; \ - else \ - KP_SPI_TXD_PORT &= ~KP_SPI_TXD_MASK; \ - } while(0) - -#define KP_SPI_CLK(x) \ - do { \ - if (x) \ - KP_SPI_CLK_PORT |= KP_SPI_CLK_MASK; \ - else \ - KP_SPI_CLK_PORT &= ~KP_SPI_CLK_MASK; \ - } while(0) - -#define KP_SPI_CLK_TOGGLE() (KP_SPI_CLK_PORT ^= KP_SPI_CLK_MASK) - -#define KP_SPI_BIT_DELAY() /* no delay */ - -#define KP_CS(x) \ - do { \ - if (x) \ - KP_CS_PORT |= KP_CS_MASK; \ - else \ - KP_CS_PORT &= ~KP_CS_MASK; \ - } while(0) - -#define KP_ROWS 7 -#define KP_COLS 4 - -#define KP_ROWS_MASK ((1 << KP_ROWS) - 1) -#define KP_COLS_MASK ((1 << KP_COLS) - 1) - -#define SCAN 0 -#define SCAN_FILTER 1 -#define SCAN_COL 2 -#define SCAN_COL_FILTER 3 -#define PRESSED 4 - -#define KP_F1 0 /* leftmost dot (tab) */ -#define KP_F2 1 /* middle left dot */ -#define KP_F3 2 /* up */ -#define KP_F4 3 /* middle right dot */ -#define KP_F5 4 /* rightmost dot */ -#define KP_F6 5 /* C */ -#define KP_F7 6 /* left */ -#define KP_F8 7 /* down */ -#define KP_F9 8 /* right */ -#define KP_F10 9 /* enter */ -#define KP_F11 10 /* R */ -#define KP_F12 11 /* save */ -#define KP_F13 12 /* redial */ -#define KP_F14 13 /* speaker */ -#define KP_F15 14 /* unused */ -#define KP_F16 15 /* unused */ - -#define KP_RELEASE -1 /* key depressed */ -#define KP_FORCE -2 /* key was pressed for more than force hz */ -#define KP_IDLE -3 /* key was released and idle */ - -#define KP_1 '1' -#define KP_2 '2' -#define KP_3 '3' -#define KP_4 '4' -#define KP_5 '5' -#define KP_6 '6' -#define KP_7 '7' -#define KP_8 '8' -#define KP_9 '9' -#define KP_0 '0' -#define KP_STAR '*' -#define KP_HASH '#' - -/*************************************************************************************************/ - -static int curs_disabled; -static int curs_col, curs_row; -static int disp_col, disp_row; - -static int width, height; - -/* the simulated vty buffer */ -static char vty_buf[ROWS * COLS]; -static char last_visible_buf[ROWS * COLS]; /* worst case */ -static char *last_visible_curs_ptr; -static int last_visible_curs_rev; -static int blinked_state; -static int last_input_mode; -static int refresh_time; -static int blink_time; -static char last_fast_punct; - -/*************************************************************************************************/ - -#define IM_SMALL 0 -#define IM_CAPITAL 1 -#define IM_NUMBER 2 - -static int input_mode; -static char fast_punct; -static int tab_indicator; -static const char *fast_punct_list = ",.:;*"; - -static const char *input_mode_txt[] = { "abc", "ABC", "123" }; - -static const char *punct = ".,!;?'\"-()@/:_+&%*=<>$[]{}\\~^#|"; -static const char *whspace = " 0\n"; -/* per mode character select (for 2-9) */ -static const char *digits_sel[2][8] = { - { /* small */ - "abc2", /* 2 */ - "def3", /* 3 */ - "ghi4", /* 4 */ - "jkl5", /* 5 */ - "mno6", /* 6 */ - "pqrs7", /* 7 */ - "tuv8", /* 8 */ - "wxyz9", /* 9 */ - }, { /* capital */ - "ABC2", /* 2 */ - "DEF3", /* 3 */ - "GHI4", /* 4 */ - "JKL5", /* 5 */ - "MNO6", /* 6 */ - "PQRS7", /* 7 */ - "TUV8", /* 8 */ - "WXYZ9", /* 9 */ - } -}; - -/*****************************************************************************/ - -static void update(void); -static void ensure_visible(int col, int row, int dx, int dy); - -static void console_init(void) -{ - curs_disabled = 0; - curs_col = 0; - curs_row = 0; - - disp_col = 0; - disp_row = 0; - - input_mode = IM_SMALL; - fast_punct = ','; - last_fast_punct = '\0'; - refresh_time = REFRESH_HZ; - blink_time = BLINK_HZ; - - memset(vty_buf, ' ', sizeof(vty_buf)); - - memset(last_visible_buf, ' ', sizeof(last_visible_buf)); - last_visible_curs_ptr = NULL; - last_input_mode = -1; - last_visible_curs_rev = 0; - - blinked_state = 0; - - sed156x_init(); - width = sed156x_text_width; - height = sed156x_text_height - 1; - - tab_indicator = 0; -} - -/*****************************************************************************/ - -void phone_putc(const char c); - -/*****************************************************************************/ - -static int queued_char = -1; -static int enabled = 0; - -/*****************************************************************************/ - -/* flush buffers */ -int phone_start(void) -{ - console_init(); - - update(); - sed156x_sync(); - - enabled = 1; - queued_char = 'U' - '@'; - - /* backlit on */ - DISPLAY_BACKLIT_PORT &= ~DISPLAY_BACKLIT_MASK; - - return 0; -} - -int phone_stop(void) -{ - enabled = 0; - - sed156x_clear(); - sed156x_sync(); - - /* backlit off */ - DISPLAY_BACKLIT_PORT |= DISPLAY_BACKLIT_MASK; - - return 0; -} - -void phone_puts(const char *s) -{ - int count = strlen(s); - - while (count--) - phone_putc(*s++); -} - -int phone_tstc(void) -{ - return queued_char >= 0 ? 1 : 0; -} - -int phone_getc(void) -{ - int r; - - if (queued_char < 0) - return -1; - - r = queued_char; - queued_char = -1; - - return r; -} - -/*****************************************************************************/ - -int drv_phone_init(void) -{ - struct stdio_dev console_dev; - - console_init(); - - memset(&console_dev, 0, sizeof(console_dev)); - strcpy(console_dev.name, "phone"); - console_dev.ext = DEV_EXT_VIDEO; /* Video extensions */ - console_dev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM; - console_dev.start = phone_start; - console_dev.stop = phone_stop; - console_dev.putc = phone_putc; /* 'putc' function */ - console_dev.puts = phone_puts; /* 'puts' function */ - console_dev.tstc = phone_tstc; /* 'tstc' function */ - console_dev.getc = phone_getc; /* 'getc' function */ - - if (stdio_register(&console_dev) == 0) - return 1; - - return 0; -} - -static int use_me; - -int drv_phone_use_me(void) -{ - return use_me; -} - -static void kp_do_poll(void); - -void phone_console_do_poll(void) -{ - int i, x, y; - - kp_do_poll(); - - if (enabled) { - /* do the blink */ - blink_time -= PHONE_CONSOLE_POLL_HZ; - if (blink_time <= 0) { - blink_time += BLINK_HZ; - if (last_visible_curs_ptr) { - i = last_visible_curs_ptr - last_visible_buf; - x = i % width; y = i / width; - sed156x_reverse_at(x, y, 1); - last_visible_curs_rev ^= 1; - } - } - - /* do the refresh */ - refresh_time -= PHONE_CONSOLE_POLL_HZ; - if (refresh_time <= 0) { - refresh_time += REFRESH_HZ; - sed156x_sync(); - } - } - -} - -static int last_scancode = -1; -static int forced_scancode = 0; -static int input_state = -1; -static int input_scancode = -1; -static int input_selected_char = -1; -static char input_covered_char; - -static void putchar_at_cursor(char c) -{ - vty_buf[curs_row * COLS + curs_col] = c; - ensure_visible(curs_col, curs_row, 1, 1); -} - -static char getchar_at_cursor(void) -{ - return vty_buf[curs_row * COLS + curs_col]; -} - -static void queue_input_char(char c) -{ - if (c <= 0) - return; - - queued_char = c; -} - -static void terminate_input(void) -{ - if (input_state < 0) - return; - - if (input_selected_char >= 0) - queue_input_char(input_selected_char); - - input_state = -1; - input_selected_char = -1; - putchar_at_cursor(input_covered_char); - - curs_disabled = 0; - blink_time = BLINK_HZ; - update(); -} - -static void handle_enabled_scancode(int scancode) -{ - char c; - int new_disp_col, new_disp_row; - const char *sel; - - - switch (scancode) { - - /* key was released */ - case KP_RELEASE: - forced_scancode = 0; - break; - - /* key was forced */ - case KP_FORCE: - - switch (last_scancode) { - case '#': - if (input_mode == IM_NUMBER) { - input_mode = IM_CAPITAL; - /* queue backspace to erase # */ - queue_input_char('\b'); - } else { - input_mode = IM_NUMBER; - fast_punct = '*'; - } - update(); - break; - - case '0': case '1': - case '2': case '3': case '4': case '5': - case '6': case '7': case '8': case '9': - - if (input_state < 0) - break; - - input_selected_char = last_scancode; - putchar_at_cursor((char)input_selected_char); - terminate_input(); - - break; - - default: - break; - } - - break; - - /* release and idle */ - case KP_IDLE: - input_scancode = -1; - if (input_state < 0) - break; - terminate_input(); - break; - - /* change input mode */ - case '#': - if (last_scancode == '#') /* no repeat */ - break; - - if (input_mode == IM_NUMBER) { - input_scancode = scancode; - input_state = 0; - input_selected_char = scancode; - input_covered_char = getchar_at_cursor(); - putchar_at_cursor((char)input_selected_char); - terminate_input(); - break; - } - - if (input_mode == IM_SMALL) - input_mode = IM_CAPITAL; - else - input_mode = IM_SMALL; - - update(); - break; - - case '*': - /* no repeat */ - if (last_scancode == scancode) - break; - - if (input_state >= 0) - terminate_input(); - - input_scancode = fast_punct; - input_state = 0; - input_selected_char = input_scancode; - input_covered_char = getchar_at_cursor(); - putchar_at_cursor((char)input_selected_char); - terminate_input(); - - break; - - case '0': case '1': - case '2': case '3': case '4': case '5': - case '6': case '7': case '8': case '9': - - /* no repeat */ - if (last_scancode == scancode) - break; - - if (input_mode == IM_NUMBER) { - input_scancode = scancode; - input_state = 0; - input_selected_char = scancode; - input_covered_char = getchar_at_cursor(); - putchar_at_cursor((char)input_selected_char); - terminate_input(); - break; - } - - if (input_state >= 0 && input_scancode != scancode) - terminate_input(); - - if (input_state < 0) { - curs_disabled = 1; - input_scancode = scancode; - input_state = 0; - input_covered_char = getchar_at_cursor(); - } else - input_state++; - - if (scancode == '0') - sel = whspace; - else if (scancode == '1') - sel = punct; - else - sel = digits_sel[input_mode][scancode - '2']; - c = *(sel + input_state); - if (c == '\0') { - input_state = 0; - c = *sel; - } - - input_selected_char = (int)c; - putchar_at_cursor((char)input_selected_char); - update(); - - break; - - /* move visible display */ - case KP_F3: case KP_F8: case KP_F7: case KP_F9: - - new_disp_col = disp_col; - new_disp_row = disp_row; - - switch (scancode) { - /* up */ - case KP_F3: - if (new_disp_row <= 0) - break; - new_disp_row--; - break; - - /* down */ - case KP_F8: - if (new_disp_row >= ROWS - height) - break; - new_disp_row++; - break; - - /* left */ - case KP_F7: - if (new_disp_col <= 0) - break; - new_disp_col--; - break; - - /* right */ - case KP_F9: - if (new_disp_col >= COLS - width) - break; - new_disp_col++; - break; - } - - /* no change? */ - if (disp_col == new_disp_col && disp_row == new_disp_row) - break; - - disp_col = new_disp_col; - disp_row = new_disp_row; - update(); - - break; - - case KP_F6: /* backspace */ - /* inputing something; no backspace sent, just cancel input */ - if (input_state >= 0) { - input_selected_char = -1; /* cancel */ - terminate_input(); - break; - } - queue_input_char('\b'); - break; - - case KP_F10: /* enter */ - /* inputing something; first cancel input */ - if (input_state >= 0) - terminate_input(); - queue_input_char('\r'); - break; - - case KP_F11: /* R -> Ctrl-C (abort) */ - if (input_state >= 0) - terminate_input(); - queue_input_char('C' - 'Q'); /* ctrl-c */ - break; - - case KP_F5: /* F% -> Ctrl-U (clear line) */ - if (input_state >= 0) - terminate_input(); - queue_input_char('U' - 'Q'); /* ctrl-c */ - break; - - - case KP_F1: /* tab */ - /* inputing something; first cancel input */ - if (input_state >= 0) - terminate_input(); - queue_input_char('\t'); - break; - - case KP_F2: /* change fast punct */ - sel = strchr(fast_punct_list, fast_punct); - if (sel == NULL) - sel = &fast_punct_list[0]; - sel++; - if (*sel == '\0') - sel = &fast_punct_list[0]; - fast_punct = *sel; - update(); - break; - - - } - - if (scancode != KP_FORCE && scancode != KP_IDLE) /* don't record forced or idle scancode */ - last_scancode = scancode; -} - -static void scancode_action(int scancode) -{ -#if 0 - if (scancode == KP_RELEASE) - printf(" RELEASE\n"); - else if (scancode == KP_FORCE) - printf(" FORCE\n"); - else if (scancode == KP_IDLE) - printf(" IDLE\n"); - else if (scancode < 32) - printf(" F%d", scancode + 1); - else - printf(" %c", (char)scancode); - printf("\n"); -#endif - - if (enabled) { - handle_enabled_scancode(scancode); - return; - } - - if (scancode == KP_FORCE && last_scancode == '*') - use_me = 1; - - last_scancode = scancode; -} - -/**************************************************************************************/ - -/* update the display; make sure to update only the differences */ -static void update(void) -{ - int i; - char *s, *e, *t, *r, *b, *cp; - - if (input_mode != last_input_mode) - sed156x_output_at(sed156x_text_width - 3, sed156x_text_height - 1, input_mode_txt[input_mode], 3); - - if (tab_indicator == 0) { - sed156x_output_at(0, sed156x_text_height - 1, "\\t", 2); - tab_indicator = 1; - } - - if (fast_punct != last_fast_punct) - sed156x_output_at(4, sed156x_text_height - 1, &fast_punct, 1); - - if (curs_disabled || - curs_col < disp_col || curs_col >= (disp_col + width) || - curs_row < disp_row || curs_row >= (disp_row + height)) { - cp = NULL; - } else - cp = last_visible_buf + (curs_row - disp_row) * width + (curs_col - disp_col); - - - /* printf("(%d,%d) (%d,%d) %s\n", curs_col, curs_row, disp_col, disp_row, cp ? "YES" : "no"); */ - - /* clear previous cursor */ - if (last_visible_curs_ptr && last_visible_curs_rev == 0) { - i = last_visible_curs_ptr - last_visible_buf; - sed156x_reverse_at(i % width, i / width, 1); - } - - b = vty_buf + disp_row * COLS + disp_col; - t = last_visible_buf; - for (i = 0; i < height; i++) { - s = b; - e = b + width; - /* update only the differences */ - do { - while (s < e && *s == *t) { - s++; - t++; - } - if (s == e) /* no more */ - break; - - /* find run */ - r = s; - while (s < e && *s != *t) - *t++ = *s++; - - /* and update */ - sed156x_output_at(r - b, i, r, s - r); - - } while (s < e); - - b += COLS; - } - - /* set cursor */ - if (cp) { - last_visible_curs_ptr = cp; - i = last_visible_curs_ptr - last_visible_buf; - sed156x_reverse_at(i % width, i / width, 1); - last_visible_curs_rev = 0; - } else { - last_visible_curs_ptr = NULL; - } - - last_input_mode = input_mode; - last_fast_punct = fast_punct; -} - -/* ensure visibility; the trick is to minimize the screen movement */ -static void ensure_visible(int col, int row, int dx, int dy) -{ - int x1, y1, x2, y2, a1, b1, a2, b2; - - /* clamp visible region */ - if (col < 0) { - dx -= col; - col = 0; - if (dx <= 0) - dx = 1; - } - - if (row < 0) { - dy -= row; - row = 0; - if (dy <= 0) - dy = 1; - } - - if (col + dx > COLS) - dx = COLS - col; - - if (row + dy > ROWS) - dy = ROWS - row; - - - /* move to easier to use vars */ - x1 = disp_col; y1 = disp_row; - x2 = x1 + width; y2 = y1 + height; - a1 = col; b1 = row; - a2 = a1 + dx; b2 = b1 + dy; - - /* printf("(%d,%d) - (%d,%d) : (%d, %d) - (%d, %d)\n", x1, y1, x2, y2, a1, b1, a2, b2); */ - - if (a2 > x2) { - /* move to the right */ - x2 = a2; - x1 = x2 - width; - if (x1 < 0) { - x1 = 0; - x2 = width; - } - } else if (a1 < x1) { - /* move to the left */ - x1 = a1; - x2 = x1 + width; - if (x2 > COLS) { - x2 = COLS; - x1 = x2 - width; - } - } - - if (b2 > y2) { - /* move down */ - y2 = b2; - y1 = y2 - height; - if (y1 < 0) { - y1 = 0; - y2 = height; - } - } else if (b1 < y1) { - /* move up */ - y1 = b1; - y2 = y1 + width; - if (y2 > ROWS) { - y2 = ROWS; - y1 = y2 - height; - } - } - - /* printf("(%d,%d) - (%d,%d) : (%d, %d) - (%d, %d)\n", x1, y1, x2, y2, a1, b1, a2, b2); */ - - /* no movement? */ - if (disp_col == x1 && disp_row == y1) - return; - - disp_col = x1; - disp_row = y1; -} - -/**************************************************************************************/ - -static void newline(void) -{ - curs_col = 0; - if (curs_row + 1 < ROWS) - curs_row++; - else { - memmove(vty_buf, vty_buf + COLS, COLS * (ROWS - 1)); - memset(vty_buf + (ROWS - 1) * COLS, ' ', COLS); - } -} - -void phone_putc(const char c) -{ - int i; - - if (input_mode != -1) { - input_selected_char = -1; - terminate_input(); - } - - curs_disabled = 1; - update(); - - blink_time = BLINK_HZ; - - switch (c) { - case '\a': /* ignore bell */ - case '\r': /* ignore carriage return */ - break; - - case '\n': /* next line */ - newline(); - ensure_visible(curs_col, curs_row, 1, 1); - break; - - case 9: /* tab 8 */ - /* move to tab */ - i = curs_col; - i |= 0x0008; - i &= ~0x0007; - - if (i < COLS) - curs_col = i; - else - newline(); - - ensure_visible(curs_col, curs_row, 1, 1); - break; - - case 8: /* backspace */ - if (curs_col <= 0) - break; - curs_col--; - - /* make sure that we see a couple of characters before */ - if (curs_col > 4) - ensure_visible(curs_col - 4, curs_row, 4, 1); - else - ensure_visible(curs_col, curs_row, 1, 1); - - break; - - default: /* draw the char */ - putchar_at_cursor(c); - - /* - * check for newline - */ - if (curs_col + 1 < COLS) - curs_col++; - else - newline(); - - ensure_visible(curs_col, curs_row, 1, 1); - - break; - } - - curs_disabled = 0; - blink_time = BLINK_HZ; - update(); -} - -/**************************************************************************************/ - -static inline unsigned int kp_transfer(unsigned int val) -{ - unsigned int rx; - int b; - - rx = 0; b = 8; - while (--b >= 0) { - KP_SPI_TXD(val & 0x80); - val <<= 1; - KP_SPI_CLK_TOGGLE(); - KP_SPI_BIT_DELAY(); - rx <<= 1; - if (KP_SPI_RXD()) - rx |= 1; - KP_SPI_CLK_TOGGLE(); - KP_SPI_BIT_DELAY(); - } - - return rx; -} - -unsigned int kp_data_transfer(unsigned int val) -{ - KP_SPI_CLK(1); - KP_CS(0); - val = kp_transfer(val); - KP_CS(1); - - return val; -} - -unsigned int kp_get_col_mask(unsigned int row_mask) -{ - unsigned int val, col_mask; - - val = 0x80 | (row_mask & 0x7F); - (void)kp_data_transfer(val); -#if CONFIG_NETPHONE_VERSION == 1 - col_mask = kp_data_transfer(val) & 0x0F; -#elif CONFIG_NETPHONE_VERSION == 2 - col_mask = ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat & 0x0f; - /* XXX FUCK FUCK FUCK FUCK FUCK!!!! */ - col_mask = ((col_mask & 0x08) >> 3) | /* BKBR1 */ - ((col_mask & 0x04) << 1) | /* BKBR2 */ - (col_mask & 0x02) | /* BKBR3 */ - ((col_mask & 0x01) << 2); /* BKBR4 */ - -#endif - /* printf("col_mask(row_mask = 0x%x) -> col_mask = 0x%x\n", row_mask, col_mask); */ - - return col_mask; -} - -/**************************************************************************************/ - -static const int kp_scancodes[KP_ROWS * KP_COLS] = { - KP_F1, KP_F3, KP_F4, KP_F2, - KP_F6, KP_F8, KP_F9, KP_F7, - KP_1, KP_3, KP_F11, KP_2, - KP_4, KP_6, KP_F12, KP_5, - KP_7, KP_9, KP_F13, KP_8, - KP_STAR, KP_HASH, KP_F14, KP_0, - KP_F5, KP_F15, KP_F16, KP_F10, -}; - -static const int kp_repeats[KP_ROWS * KP_COLS] = { - 0, 1, 0, 0, - 0, 1, 1, 1, - 1, 1, 0, 1, - 1, 1, 0, 1, - 1, 1, 0, 1, - 1, 1, 0, 1, - 0, 0, 0, 1, -}; - -static int kp_state = SCAN; -static int kp_last_col_mask; -static int kp_cur_row, kp_cur_col; -static int kp_scancode; -static int kp_stable; -static int kp_repeat; -static int kp_repeat_time; -static int kp_force_time; -static int kp_idle_time; - -static void kp_do_poll(void) -{ - unsigned int col_mask; - int col; - - switch (kp_state) { - case SCAN: - if (kp_idle_time > 0) { - kp_idle_time -= PHONE_CONSOLE_POLL_HZ; - if (kp_idle_time <= 0) - scancode_action(KP_IDLE); - } - - col_mask = kp_get_col_mask(KP_ROWS_MASK); - if (col_mask == KP_COLS_MASK) - break; /* nothing */ - kp_last_col_mask = col_mask; - kp_stable = 0; - kp_state = SCAN_FILTER; - break; - - case SCAN_FILTER: - col_mask = kp_get_col_mask(KP_ROWS_MASK); - if (col_mask != kp_last_col_mask) { - kp_state = SCAN; - break; - } - - kp_stable += PHONE_CONSOLE_POLL_HZ; - if (kp_stable < KP_STABLE_HZ) - break; - - kp_cur_row = 0; - kp_stable = 0; - kp_state = SCAN_COL; - - (void)kp_get_col_mask(1 << kp_cur_row); - break; - - case SCAN_COL: - col_mask = kp_get_col_mask(1 << kp_cur_row); - if (col_mask == KP_COLS_MASK) { - if (++kp_cur_row >= KP_ROWS) { - kp_state = SCAN; - break; - } - kp_get_col_mask(1 << kp_cur_row); - break; - } - kp_last_col_mask = col_mask; - kp_stable = 0; - kp_state = SCAN_COL_FILTER; - break; - - case SCAN_COL_FILTER: - col_mask = kp_get_col_mask(1 << kp_cur_row); - if (col_mask != kp_last_col_mask || col_mask == KP_COLS_MASK) { - kp_state = SCAN; - break; - } - - kp_stable += PHONE_CONSOLE_POLL_HZ; - if (kp_stable < KP_STABLE_HZ) - break; - - for (col = 0; col < KP_COLS; col++) - if ((col_mask & (1 << col)) == 0) - break; - kp_cur_col = col; - kp_state = PRESSED; - kp_scancode = kp_scancodes[kp_cur_row * KP_COLS + kp_cur_col]; - kp_repeat = kp_repeats[kp_cur_row * KP_COLS + kp_cur_col]; - - if (kp_repeat) - kp_repeat_time = KP_REPEAT_DELAY_HZ; - kp_force_time = KP_FORCE_DELAY_HZ; - - scancode_action(kp_scancode); - - break; - - case PRESSED: - col_mask = kp_get_col_mask(1 << kp_cur_row); - if (col_mask != kp_last_col_mask) { - kp_state = SCAN; - scancode_action(KP_RELEASE); - kp_idle_time = KP_IDLE_DELAY_HZ; - break; - } - - if (kp_repeat) { - kp_repeat_time -= PHONE_CONSOLE_POLL_HZ; - if (kp_repeat_time <= 0) { - kp_repeat_time += KP_REPEAT_HZ; - scancode_action(kp_scancode); - } - } - - if (kp_force_time > 0) { - kp_force_time -= PHONE_CONSOLE_POLL_HZ; - if (kp_force_time <= 0) - scancode_action(KP_FORCE); - } - - break; - } -} - -/**************************************************************************************/ - -int drv_phone_is_idle(void) -{ - return kp_state == SCAN; -} diff --git a/board/netphone/u-boot.lds b/board/netphone/u-boot.lds deleted file mode 100644 index 0dff5a4..0000000 --- a/board/netphone/u-boot.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/netphone/u-boot.lds.debug b/board/netphone/u-boot.lds.debug deleted file mode 100644 index a198cf9..0000000 --- a/board/netphone/u-boot.lds.debug +++ /dev/null @@ -1,121 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text) - common/dlmalloc.o (.text) - lib/vsprintf.o (.text) - lib/crc32.o (.text) - - . = env_offset; - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/netta/Makefile b/board/netta/Makefile deleted file mode 100644 index 98bac7e..0000000 --- a/board/netta/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = netta.o flash.o dsp.o codec.o pcmcia.o diff --git a/board/netta/codec.c b/board/netta/codec.c deleted file mode 100644 index e303aa4..0000000 --- a/board/netta/codec.c +++ /dev/null @@ -1,1481 +0,0 @@ -/* - * CODEC - */ - -#include -#include - -#include "mpc8xx.h" - -/***********************************************/ - -#define MAX_DUSLIC 4 - -#define NUM_CHANNELS 2 -#define MAX_SLICS (MAX_DUSLIC * NUM_CHANNELS) - -/***********************************************/ - -#define SOP_READ_CH_0 0xC4 /* Read SOP Register for Channel A */ -#define SOP_READ_CH_1 0xCC /* Read SOP Register for Channel B */ -#define SOP_WRITE_CH_0 0x44 /* Write SOP Register for Channel A */ -#define SOP_WRITE_CH_1 0x4C /* Write SOP Register for Channel B */ - -#define COP_READ_CH_0 0xC5 -#define COP_READ_CH_1 0xCD -#define COP_WRITE_CH_0 0x45 -#define COP_WRITE_CH_1 0x4D - -#define POP_READ_CH_0 0xC6 -#define POP_READ_CH_1 0xCE -#define POP_WRITE_CH_0 0x46 -#define POP_WRITE_CH_1 0x4E - -#define RST_CMD_DUSLIC_CHIP 0x40 /* OR 0x48 */ -#define RST_CMD_DUSLIC_CH_A 0x41 -#define RST_CMD_DUSLIC_CH_B 0x49 - -#define PCM_RESYNC_CMD_CH_A 0x42 -#define PCM_RESYNC_CMD_CH_B 0x4A - -#define ACTIVE_HOOK_LEV_4 0 -#define ACTIVE_HOOK_LEV_12 1 - -#define SLIC_P_NORMAL 0x01 - -/************************************************/ - -#define CODSP_WR 0x00 -#define CODSP_RD 0x80 -#define CODSP_OP 0x40 -#define CODSP_ADR(x) (((unsigned char)(x) & 7) << 3) -#define CODSP_M(x) ((unsigned char)(x) & 7) -#define CODSP_CMD(x) ((unsigned char)(x) & 7) - -/************************************************/ - -/* command indication ops */ -#define CODSP_M_SLEEP_PWRDN 7 -#define CODSP_M_PWRDN_HIZ 0 -#define CODSP_M_ANY_ACT 2 -#define CODSP_M_RING 5 -#define CODSP_M_ACT_MET 6 -#define CODSP_M_GND_START 4 -#define CODSP_M_RING_PAUSE 1 - -/* single byte commands */ -#define CODSP_CMD_SOFT_RESET CODSP_CMD(0) -#define CODSP_CMD_RESET_CH CODSP_CMD(1) -#define CODSP_CMD_RESYNC CODSP_CMD(2) - -/* two byte commands */ -#define CODSP_CMD_SOP CODSP_CMD(4) -#define CODSP_CMD_COP CODSP_CMD(5) -#define CODSP_CMD_POP CODSP_CMD(6) - -/************************************************/ - -/* read as 4-bytes */ -#define CODSP_INTREG_INT_CH 0x80000000 -#define CODSP_INTREG_HOOK 0x40000000 -#define CODSP_INTREG_GNDK 0x20000000 -#define CODSP_INTREG_GNDP 0x10000000 -#define CODSP_INTREG_ICON 0x08000000 -#define CODSP_INTREG_VRTLIM 0x04000000 -#define CODSP_INTREG_OTEMP 0x02000000 -#define CODSP_INTREG_SYNC_FAIL 0x01000000 -#define CODSP_INTREG_LM_THRES 0x00800000 -#define CODSP_INTREG_READY 0x00400000 -#define CODSP_INTREG_RSTAT 0x00200000 -#define CODSP_INTREG_LM_OK 0x00100000 -#define CODSP_INTREG_IO4_DU 0x00080000 -#define CODSP_INTREG_IO3_DU 0x00040000 -#define CODSP_INTREG_IO2_DU 0x00020000 -#define CODSP_INTREG_IO1_DU 0x00010000 -#define CODSP_INTREG_DTMF_OK 0x00008000 -#define CODSP_INTREG_DTMF_KEY4 0x00004000 -#define CODSP_INTREG_DTMF_KEY3 0x00002000 -#define CODSP_INTREG_DTMF_KEY2 0x00001000 -#define CODSP_INTREG_DTMF_KEY1 0x00000800 -#define CODSP_INTREG_DTMF_KEY0 0x00000400 -#define CODSP_INTREG_UTDR_OK 0x00000200 -#define CODSP_INTREG_UTDX_OK 0x00000100 -#define CODSP_INTREG_EDSP_FAIL 0x00000080 -#define CODSP_INTREG_CIS_BOF 0x00000008 -#define CODSP_INTREG_CIS_BUF 0x00000004 -#define CODSP_INTREG_CIS_REQ 0x00000002 -#define CODSP_INTREG_CIS_ACT 0x00000001 - -/************************************************/ - -/* ======== SOP REG ADDRESSES =======*/ - -#define REVISION_ADDR 0x00 -#define PCMC1_ADDR 0x05 -#define XCR_ADDR 0x06 -#define INTREG1_ADDR 0x07 -#define INTREG2_ADDR 0x08 -#define INTREG3_ADDR 0x09 -#define INTREG4_ADDR 0x0A -#define LMRES1_ADDR 0x0D -#define MASK_ADDR 0x11 -#define IOCTL3_ADDR 0x14 -#define BCR1_ADDR 0x15 -#define BCR2_ADDR 0x16 -#define BCR3_ADDR 0x17 -#define BCR4_ADDR 0x18 -#define BCR5_ADDR 0x19 -#define DSCR_ADDR 0x1A -#define LMCR1_ADDR 0x1C -#define LMCR2_ADDR 0x1D -#define LMCR3_ADDR 0x1E -#define OFR1_ADDR 0x1F -#define PCMR1_ADDR 0x21 -#define PCMX1_ADDR 0x25 -#define TSTR3_ADDR 0x2B -#define TSTR4_ADDR 0x2C -#define TSTR5_ADDR 0x2D - -/* ========= POP REG ADDRESSES ========*/ - -#define CIS_DAT_ADDR 0x00 - -#define LEC_LEN_ADDR 0x3A -#define LEC_POWR_ADDR 0x3B -#define LEC_DELP_ADDR 0x3C -#define LEC_DELQ_ADDR 0x3D -#define LEC_GAIN_XI_ADDR 0x3E -#define LEC_GAIN_RI_ADDR 0x3F -#define LEC_GAIN_XO_ADDR 0x40 -#define LEC_RES_1_ADDR 0x41 -#define LEC_RES_2_ADDR 0x42 - -#define NLP_POW_LPF_ADDR 0x30 -#define NLP_POW_LPS_ADDR 0x31 -#define NLP_BN_LEV_X_ADDR 0x32 -#define NLP_BN_LEV_R_ADDR 0x33 -#define NLP_BN_INC_ADDR 0x34 -#define NLP_BN_DEC_ADDR 0x35 -#define NLP_BN_MAX_ADDR 0x36 -#define NLP_BN_ADJ_ADDR 0x37 -#define NLP_RE_MIN_ERLL_ADDR 0x38 -#define NLP_RE_EST_ERLL_ADDR 0x39 -#define NLP_SD_LEV_X_ADDR 0x3A -#define NLP_SD_LEV_R_ADDR 0x3B -#define NLP_SD_LEV_BN_ADDR 0x3C -#define NLP_SD_LEV_RE_ADDR 0x3D -#define NLP_SD_OT_DT_ADDR 0x3E -#define NLP_ERL_LIN_LP_ADDR 0x3F -#define NLP_ERL_LEC_LP_ADDR 0x40 -#define NLP_CT_LEV_RE_ADDR 0x41 -#define NLP_CTRL_ADDR 0x42 - -#define UTD_CF_H_ADDR 0x4B -#define UTD_CF_L_ADDR 0x4C -#define UTD_BW_H_ADDR 0x4D -#define UTD_BW_L_ADDR 0x4E -#define UTD_NLEV_ADDR 0x4F -#define UTD_SLEV_H_ADDR 0x50 -#define UTD_SLEV_L_ADDR 0x51 -#define UTD_DELT_ADDR 0x52 -#define UTD_RBRK_ADDR 0x53 -#define UTD_RTIME_ADDR 0x54 -#define UTD_EBRK_ADDR 0x55 -#define UTD_ETIME_ADDR 0x56 - -#define DTMF_LEV_ADDR 0x30 -#define DTMF_TWI_ADDR 0x31 -#define DTMF_NCF_H_ADDR 0x32 -#define DTMF_NCF_L_ADDR 0x33 -#define DTMF_NBW_H_ADDR 0x34 -#define DTMF_NBW_L_ADDR 0x35 -#define DTMF_GAIN_ADDR 0x36 -#define DTMF_RES1_ADDR 0x37 -#define DTMF_RES2_ADDR 0x38 -#define DTMF_RES3_ADDR 0x39 - -#define CIS_LEV_H_ADDR 0x43 -#define CIS_LEV_L_ADDR 0x44 -#define CIS_BRS_ADDR 0x45 -#define CIS_SEIZ_H_ADDR 0x46 -#define CIS_SEIZ_L_ADDR 0x47 -#define CIS_MARK_H_ADDR 0x48 -#define CIS_MARK_L_ADDR 0x49 -#define CIS_LEC_MODE_ADDR 0x4A - -/*=====================================*/ - -#define HOOK_LEV_ACT_START_ADDR 0x89 -#define RO1_START_ADDR 0x70 -#define RO2_START_ADDR 0x95 -#define RO3_START_ADDR 0x96 - -#define TG1_FREQ_START_ADDR 0x38 -#define TG1_GAIN_START_ADDR 0x39 -#define TG1_BANDPASS_START_ADDR 0x3B -#define TG1_BANDPASS_END_ADDR 0x3D - -#define TG2_FREQ_START_ADDR 0x40 -#define TG2_GAIN_START_ADDR 0x41 -#define TG2_BANDPASS_START_ADDR 0x43 -#define TG2_BANDPASS_END_ADDR 0x45 - -/*====================================*/ - -#define PCM_HW_B 0x80 -#define PCM_HW_A 0x00 -#define PCM_TIME_SLOT_0 0x00 /* Byte 0 of PCM Frame (by default is assigned to channel A ) */ -#define PCM_TIME_SLOT_1 0x01 /* Byte 1 of PCM Frame (by default is assigned to channel B ) */ -#define PCM_TIME_SLOT_4 0x04 /* Byte 4 of PCM Frame (Corresponds to B1 of the Second GCI ) */ - -#define RX_LEV_ADDR 0x28 -#define TX_LEV_ADDR 0x30 -#define Ik1_ADDR 0x83 - -#define AR_ROW 3 /* Is the row (AR Params) of the ac_Coeff array in SMS_CODEC_Defaults struct */ -#define AX_ROW 6 /* Is the row (AX Params) of the ac_Coeff array in SMS_CODEC_Defaults struct */ -#define DCF_ROW 0 /* Is the row (DCF Params) of the dc_Coeff array in SMS_CODEC_Defaults struct */ - -/* Mark the start byte of Duslic parameters that we use with configurator */ -#define Ik1_START_BYTE 3 -#define RX_LEV_START_BYTE 0 -#define TX_LEV_START_BYTE 0 - -/************************************************/ - -#define INTREG4_CIS_ACT (1 << 0) - -#define BCR1_SLEEP 0x20 -#define BCR1_REVPOL 0x10 -#define BCR1_ACTR 0x08 -#define BCR1_ACTL 0x04 -#define BCR1_SLIC_MASK 0x03 - -#define BCR2_HARD_POL_REV 0x40 -#define BCR2_TTX 0x20 -#define BCR2_TTX_12K 0x10 -#define BCR2_HIMAN 0x08 -#define BCR2_PDOT 0x01 - -#define BCR3_PCMX_EN (1 << 4) - -#define BCR5_DTMF_EN (1 << 0) -#define BCR5_DTMF_SRC (1 << 1) -#define BCR5_LEC_EN (1 << 2) -#define BCR5_LEC_OUT (1 << 3) -#define BCR5_CIS_EN (1 << 4) -#define BCR5_CIS_AUTO (1 << 5) -#define BCR5_UTDX_EN (1 << 6) -#define BCR5_UTDR_EN (1 << 7) - -#define DSCR_TG1_EN (1 << 0) -#define DSCR_TG2_EN (1 << 1) -#define DSCR_PTG (1 << 2) -#define DSCR_COR8 (1 << 3) -#define DSCR_DG_KEY(x) (((x) & 0x0F) << 4) - -#define CIS_LEC_MODE_CIS_V23 (1 << 0) -#define CIS_LEC_MODE_CIS_FRM (1 << 1) -#define CIS_LEC_MODE_NLP_EN (1 << 2) -#define CIS_LEC_MODE_UTDR_SUM (1 << 4) -#define CIS_LEC_MODE_UTDX_SUM (1 << 5) -#define CIS_LEC_MODE_LEC_FREEZE (1 << 6) -#define CIS_LEC_MODE_LEC_ADAPT (1 << 7) - -#define TSTR4_COR_64 (1 << 5) - -#define TSTR3_AC_DLB_8K (1 << 2) -#define TSTR3_AC_DLB_32K (1 << 3) -#define TSTR3_AC_DLB_4M (1 << 5) - - -#define LMCR1_TEST_EN (1 << 7) -#define LMCR1_LM_EN (1 << 6) -#define LMCR1_LM_THM (1 << 5) -#define LMCR1_LM_ONCE (1 << 2) -#define LMCR1_LM_MASK (1 << 1) - -#define LMCR2_LM_RECT (1 << 5) -#define LMCR2_LM_SEL_VDD 0x0D -#define LMCR2_LM_SEL_IO3 0x0A -#define LMCR2_LM_SEL_IO4 0x0B -#define LMCR2_LM_SEL_IO4_MINUS_IO3 0x0F - -#define LMCR3_RTR_SEL (1 << 6) - -#define LMCR3_RNG_OFFSET_NONE 0x00 -#define LMCR3_RNG_OFFSET_1 0x01 -#define LMCR3_RNG_OFFSET_2 0x02 -#define LMCR3_RNG_OFFSET_3 0x03 - -#define TSTR5_DC_HOLD (1 << 3) - -/************************************************/ - -#define TARGET_ONHOOK_BATH_x100 4600 /* 46.0 Volt */ -#define TARGET_ONHOOK_BATL_x100 2500 /* 25.0 Volt */ -#define TARGET_V_DIVIDER_RATIO_x100 21376L /* (R1+R2)/R2 = 213.76 */ -#define DIVIDER_RATIO_ACCURx100 (22 * 100) -#define V_AD_x10000 10834L /* VAD = 1.0834 */ -#define TARGET_VDDx100 330 /* VDD = 3.3 * 10 */ -#define VDD_MAX_DIFFx100 20 /* VDD Accur = 0.2*100 */ - -#define RMS_MULTIPLIERx100 111 /* pi/(2xsqrt(2)) = 1.11*/ -#define K_INTDC_RECT_ON 4 /* When Rectifier is ON this value is necessary(2^4) */ -#define K_INTDC_RECT_OFF 2 /* 2^2 */ -#define RNG_FREQ 25 -#define SAMPLING_FREQ (2000L) -#define N_SAMPLES (SAMPLING_FREQ/RNG_FREQ) /* for Ring Freq =25Hz (40ms Integration Period)[Sampling rate 2KHz -->1 Sample every 500us] */ -#define HOOK_THRESH_RING_START_ADDR 0x8B -#define RING_PARAMS_START_ADDR 0x70 - -#define V_OUT_BATH_MAX_DIFFx100 300 /* 3.0 x100 */ -#define V_OUT_BATL_MAX_DIFFx100 400 /* 4.0 x100 */ -#define MAX_V_RING_MEANx100 50 -#define TARGET_V_RING_RMSx100 2720 -#define V_RMS_RING_MAX_DIFFx100 250 - -#define LM_OK_SRC_IRG_2 (1 << 4) - -/************************************************/ - -#define PORTB (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat) -#define PORTC (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat) -#define PORTD (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) - -#define _PORTD_SET(mask, state) \ - do { \ - if (state) \ - PORTD |= mask; \ - else \ - PORTD &= ~mask; \ - } while (0) - -#define _PORTB_SET(mask, state) \ - do { \ - if (state) \ - PORTB |= mask; \ - else \ - PORTB &= ~mask; \ - } while (0) - -#define _PORTB_TGL(mask) do { PORTB ^= mask; } while (0) -#define _PORTB_GET(mask) (!!(PORTB & mask)) - -#define _PORTC_GET(mask) (!!(PORTC & mask)) - -/* port B */ -#define SPI_RXD (1 << (31 - 28)) -#define SPI_TXD (1 << (31 - 29)) -#define SPI_CLK (1 << (31 - 30)) - -/* port C */ -#define COM_HOOK1 (1 << (15 - 9)) -#define COM_HOOK2 (1 << (15 - 10)) - -#ifndef CONFIG_NETTA_SWAPHOOK - -#define COM_HOOK3 (1 << (15 - 11)) -#define COM_HOOK4 (1 << (15 - 12)) - -#else - -#define COM_HOOK3 (1 << (15 - 12)) -#define COM_HOOK4 (1 << (15 - 11)) - -#endif - -/* port D */ -#define SPIENC1 (1 << (15 - 9)) -#define SPIENC2 (1 << (15 - 10)) -#define SPIENC3 (1 << (15 - 11)) -#define SPIENC4 (1 << (15 - 14)) - -#define SPI_DELAY() udelay(1) - -static inline unsigned int __SPI_Transfer(unsigned int tx) -{ - unsigned int rx; - int b; - - rx = 0; b = 8; - while (--b >= 0) { - _PORTB_SET(SPI_TXD, tx & 0x80); - tx <<= 1; - _PORTB_TGL(SPI_CLK); - SPI_DELAY(); - rx <<= 1; - rx |= _PORTB_GET(SPI_RXD); - _PORTB_TGL(SPI_CLK); - SPI_DELAY(); - } - - return rx; -} - -static const char *codsp_dtmf_map = "D1234567890*#ABC"; - -static const int spienc_mask_tab[4] = { SPIENC1, SPIENC2, SPIENC3, SPIENC4 }; -static const int com_hook_mask_tab[4] = { COM_HOOK1, COM_HOOK2, COM_HOOK3, COM_HOOK4 }; - -static unsigned int codsp_send(int duslic_id, const unsigned char *cmd, int cmdlen, unsigned char *res, int reslen) -{ - unsigned int rx; - int i; - - /* just some sanity checks */ - if (cmd == 0 || cmdlen < 0) - return -1; - - _PORTD_SET(spienc_mask_tab[duslic_id], 0); - - /* first 2 bytes are without response */ - i = 2; - while (i-- > 0 && cmdlen-- > 0) - __SPI_Transfer(*cmd++); - - while (cmdlen-- > 0) { - rx = __SPI_Transfer(*cmd++); - if (res != 0 && reslen-- > 0) - *res++ = (unsigned char)rx; - } - if (res != 0) { - while (reslen-- > 0) - *res++ = __SPI_Transfer(0xFF); - } - - _PORTD_SET(spienc_mask_tab[duslic_id], 1); - - return 0; -} - -/****************************************************************************/ - -void codsp_set_ciop_m(int duslic_id, int channel, unsigned char m) -{ - unsigned char cmd = CODSP_WR | CODSP_ADR(channel) | CODSP_M(m); - codsp_send(duslic_id, &cmd, 1, 0, 0); -} - -void codsp_reset_chip(int duslic_id) -{ - static const unsigned char cmd = CODSP_WR | CODSP_OP | CODSP_CMD_SOFT_RESET; - codsp_send(duslic_id, &cmd, 1, 0, 0); -} - -void codsp_reset_channel(int duslic_id, int channel) -{ - unsigned char cmd = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_RESET_CH; - codsp_send(duslic_id, &cmd, 1, 0, 0); -} - -void codsp_resync_channel(int duslic_id, int channel) -{ - unsigned char cmd = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_RESYNC; - codsp_send(duslic_id, &cmd, 1, 0, 0); -} - -/****************************************************************************/ - -void codsp_write_sop_char(int duslic_id, int channel, unsigned char regno, unsigned char val) -{ - unsigned char cmd[3]; - - cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_SOP; - cmd[1] = regno; - cmd[2] = val; - - codsp_send(duslic_id, cmd, 3, 0, 0); -} - -void codsp_write_sop_short(int duslic_id, int channel, unsigned char regno, unsigned short val) -{ - unsigned char cmd[4]; - - cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_SOP; - cmd[1] = regno; - cmd[2] = (unsigned char)(val >> 8); - cmd[3] = (unsigned char)val; - - codsp_send(duslic_id, cmd, 4, 0, 0); -} - -void codsp_write_sop_int(int duslic_id, int channel, unsigned char regno, unsigned int val) -{ - unsigned char cmd[6]; - - cmd[0] = CODSP_WR | CODSP_ADR(channel) | CODSP_CMD_SOP; - cmd[1] = regno; - cmd[2] = (unsigned char)(val >> 24); - cmd[3] = (unsigned char)(val >> 16); - cmd[4] = (unsigned char)(val >> 8); - cmd[5] = (unsigned char)val; - - codsp_send(duslic_id, cmd, 6, 0, 0); -} - -unsigned char codsp_read_sop_char(int duslic_id, int channel, unsigned char regno) -{ - unsigned char cmd[3]; - unsigned char res[2]; - - cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_SOP; - cmd[1] = regno; - - codsp_send(duslic_id, cmd, 2, res, 2); - - return res[1]; -} - -unsigned short codsp_read_sop_short(int duslic_id, int channel, unsigned char regno) -{ - unsigned char cmd[2]; - unsigned char res[3]; - - cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_SOP; - cmd[1] = regno; - - codsp_send(duslic_id, cmd, 2, res, 3); - - return ((unsigned short)res[1] << 8) | res[2]; -} - -unsigned int codsp_read_sop_int(int duslic_id, int channel, unsigned char regno) -{ - unsigned char cmd[2]; - unsigned char res[5]; - - cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_SOP; - cmd[1] = regno; - - codsp_send(duslic_id, cmd, 2, res, 5); - - return ((unsigned int)res[1] << 24) | ((unsigned int)res[2] << 16) | ((unsigned int)res[3] << 8) | res[4]; -} - -/****************************************************************************/ - -void codsp_write_cop_block(int duslic_id, int channel, unsigned char addr, const unsigned char *block) -{ - unsigned char cmd[10]; - - cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_COP; - cmd[1] = addr; - memcpy(cmd + 2, block, 8); - codsp_send(duslic_id, cmd, 10, 0, 0); -} - -void codsp_write_cop_char(int duslic_id, int channel, unsigned char addr, unsigned char val) -{ - unsigned char cmd[3]; - - cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_COP; - cmd[1] = addr; - cmd[2] = val; - codsp_send(duslic_id, cmd, 3, 0, 0); -} - -void codsp_write_cop_short(int duslic_id, int channel, unsigned char addr, unsigned short val) -{ - unsigned char cmd[4]; - - cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_COP; - cmd[1] = addr; - cmd[2] = (unsigned char)(val >> 8); - cmd[3] = (unsigned char)val; - - codsp_send(duslic_id, cmd, 4, 0, 0); -} - -void codsp_read_cop_block(int duslic_id, int channel, unsigned char addr, unsigned char *block) -{ - unsigned char cmd[2]; - unsigned char res[9]; - - cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_COP; - cmd[1] = addr; - codsp_send(duslic_id, cmd, 2, res, 9); - memcpy(block, res + 1, 8); -} - -unsigned char codsp_read_cop_char(int duslic_id, int channel, unsigned char addr) -{ - unsigned char cmd[2]; - unsigned char res[2]; - - cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_COP; - cmd[1] = addr; - codsp_send(duslic_id, cmd, 2, res, 2); - return res[1]; -} - -unsigned short codsp_read_cop_short(int duslic_id, int channel, unsigned char addr) -{ - unsigned char cmd[2]; - unsigned char res[3]; - - cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_COP; - cmd[1] = addr; - - codsp_send(duslic_id, cmd, 2, res, 3); - - return ((unsigned short)res[1] << 8) | res[2]; -} - -/****************************************************************************/ - -#define MAX_POP_BLOCK 50 - -void codsp_write_pop_block (int duslic_id, int channel, unsigned char addr, - const unsigned char *block, int len) -{ - unsigned char cmd[2 + MAX_POP_BLOCK]; - - if (len > MAX_POP_BLOCK) /* truncate */ - len = MAX_POP_BLOCK; - - cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR (channel) | CODSP_CMD_POP; - cmd[1] = addr; - memcpy (cmd + 2, block, len); - codsp_send (duslic_id, cmd, 2 + len, 0, 0); -} - -void codsp_write_pop_char (int duslic_id, int channel, unsigned char regno, - unsigned char val) -{ - unsigned char cmd[3]; - - cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR (channel) | CODSP_CMD_POP; - cmd[1] = regno; - cmd[2] = val; - - codsp_send (duslic_id, cmd, 3, 0, 0); -} - -void codsp_write_pop_short (int duslic_id, int channel, unsigned char regno, - unsigned short val) -{ - unsigned char cmd[4]; - - cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR (channel) | CODSP_CMD_POP; - cmd[1] = regno; - cmd[2] = (unsigned char) (val >> 8); - cmd[3] = (unsigned char) val; - - codsp_send (duslic_id, cmd, 4, 0, 0); -} - -void codsp_write_pop_int (int duslic_id, int channel, unsigned char regno, - unsigned int val) -{ - unsigned char cmd[6]; - - cmd[0] = CODSP_WR | CODSP_ADR (channel) | CODSP_CMD_POP; - cmd[1] = regno; - cmd[2] = (unsigned char) (val >> 24); - cmd[3] = (unsigned char) (val >> 16); - cmd[4] = (unsigned char) (val >> 8); - cmd[5] = (unsigned char) val; - - codsp_send (duslic_id, cmd, 6, 0, 0); -} - -unsigned char codsp_read_pop_char (int duslic_id, int channel, - unsigned char regno) -{ - unsigned char cmd[3]; - unsigned char res[2]; - - cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR (channel) | CODSP_CMD_POP; - cmd[1] = regno; - - codsp_send (duslic_id, cmd, 2, res, 2); - - return res[1]; -} - -unsigned short codsp_read_pop_short (int duslic_id, int channel, - unsigned char regno) -{ - unsigned char cmd[2]; - unsigned char res[3]; - - cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR (channel) | CODSP_CMD_POP; - cmd[1] = regno; - - codsp_send (duslic_id, cmd, 2, res, 3); - - return ((unsigned short) res[1] << 8) | res[2]; -} - -unsigned int codsp_read_pop_int (int duslic_id, int channel, - unsigned char regno) -{ - unsigned char cmd[2]; - unsigned char res[5]; - - cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR (channel) | CODSP_CMD_POP; - cmd[1] = regno; - - codsp_send (duslic_id, cmd, 2, res, 5); - - return (((unsigned int) res[1] << 24) | - ((unsigned int) res[2] << 16) | - ((unsigned int) res[3] << 8) | - res[4] ); -} -/****************************************************************************/ - -struct _coeffs { - unsigned char addr; - unsigned char values[8]; -}; - -struct _coeffs ac_coeffs[11] = { - { 0x60, {0xAD,0xDA,0xB5,0x9B,0xC7,0x2A,0x9D,0x00} }, /* 0x60 IM-Filter part 1 */ - { 0x68, {0x10,0x00,0xA9,0x82,0x0D,0x77,0x0A,0x00} }, /* 0x68 IM-Filter part 2 */ - { 0x18, {0x08,0xC0,0xD2,0xAB,0xA5,0xE2,0xAB,0x07} }, /* 0x18 FRR-Filter */ - { 0x28, {0x44,0x93,0xF5,0x92,0x88,0x00,0x00,0x00} }, /* 0x28 AR-Filter */ - { 0x48, {0x96,0x38,0x29,0x96,0xC9,0x2B,0x8B,0x00} }, /* 0x48 LPR-Filter */ - { 0x20, {0x08,0xB0,0xDA,0x9D,0xA7,0xFA,0x93,0x06} }, /* 0x20 FRX-Filter */ - { 0x30, {0xBA,0xAC,0x00,0x01,0x85,0x50,0xC0,0x1A} }, /* 0x30 AX-Filter */ - { 0x50, {0x96,0x38,0x29,0xF5,0xFA,0x2B,0x8B,0x00} }, /* 0x50 LPX-Filter */ - { 0x00, {0x00,0x08,0x08,0x81,0x00,0x80,0x00,0x08} }, /* 0x00 TH-Filter part 1 */ - { 0x08, {0x81,0x00,0x80,0x00,0xD7,0x33,0xBA,0x01} }, /* 0x08 TH-Filter part 2 */ - { 0x10, {0xB3,0x6C,0xDC,0xA3,0xA4,0xE5,0x88,0x00} } /* 0x10 TH-Filter part 3 */ -}; - -struct _coeffs ac_coeffs_0dB[11] = { - { 0x60, {0xAC,0x2A,0xB5,0x9A,0xB7,0x2A,0x9D,0x00} }, - { 0x68, {0x10,0x00,0xA9,0x82,0x0D,0x83,0x0A,0x00} }, - { 0x18, {0x08,0x20,0xD4,0xA4,0x65,0xEE,0x92,0x07} }, - { 0x28, {0x2B,0xAB,0x36,0xA5,0x88,0x00,0x00,0x00} }, - { 0x48, {0xAB,0xE9,0x4E,0x32,0xAB,0x25,0xA5,0x03} }, - { 0x20, {0x08,0x20,0xDB,0x9C,0xA7,0xFA,0xB4,0x07} }, - { 0x30, {0xF3,0x10,0x07,0x60,0x85,0x40,0xC0,0x1A} }, - { 0x50, {0x96,0x38,0x29,0x97,0x39,0x19,0x8B,0x00} }, - { 0x00, {0x00,0x08,0x08,0x81,0x00,0x80,0x00,0x08} }, - { 0x08, {0x81,0x00,0x80,0x00,0x47,0x3C,0xD2,0x01} }, - { 0x10, {0x62,0xDB,0x4A,0x87,0x73,0x28,0x88,0x00} } -}; - -struct _coeffs dc_coeffs[9] = { - { 0x80, {0x25,0x59,0x9C,0x23,0x24,0x23,0x32,0x1C} }, /* 0x80 DC-Parameter */ - { 0x70, {0x90,0x30,0x1B,0xC0,0x33,0x43,0xAC,0x02} }, /* 0x70 Ringing */ - { 0x90, {0x3F,0xC3,0x2E,0x3A,0x80,0x90,0x00,0x09} }, /* 0x90 LP-Filters */ - { 0x88, {0xAF,0x80,0x27,0x7B,0x01,0x4C,0x7B,0x02} }, /* 0x88 Hook Levels */ - { 0x78, {0x00,0xC0,0x6D,0x7A,0xB3,0x78,0x89,0x00} }, /* 0x78 Ramp Generator */ - { 0x58, {0xA5,0x44,0x34,0xDB,0x0E,0xA2,0x2A,0x00} }, /* 0x58 TTX */ - { 0x38, {0x33,0x49,0x9A,0x65,0xBB,0x00,0x00,0x00} }, /* 0x38 TG1 */ - { 0x40, {0x33,0x49,0x9A,0x65,0xBB,0x00,0x00,0x00} }, /* 0x40 TG2 */ - { 0x98, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00} } /* 0x98 Reserved */ -}; - -void program_coeffs(int duslic_id, int channel, struct _coeffs *coeffs, int tab_size) -{ - int i; - - for (i = 0; i < tab_size; i++) - codsp_write_cop_block(duslic_id, channel, coeffs[i].addr, coeffs[i].values); -} - -#define SS_OPEN_CIRCUIT 0 -#define SS_RING_PAUSE 1 -#define SS_ACTIVE 2 -#define SS_ACTIVE_HIGH 3 -#define SS_ACTIVE_RING 4 -#define SS_RINGING 5 -#define SS_ACTIVE_WITH_METERING 6 -#define SS_ONHOOKTRNSM 7 -#define SS_STANDBY 8 -#define SS_MAX 8 - -static void codsp_set_slic(int duslic_id, int channel, int state) -{ - unsigned char v; - - v = codsp_read_sop_char(duslic_id, channel, BCR1_ADDR); - - switch (state) { - - case SS_ACTIVE: - codsp_write_sop_char(duslic_id, channel, BCR1_ADDR, (v & ~BCR1_ACTR) | BCR1_ACTL); - codsp_set_ciop_m(duslic_id, channel, CODSP_M_ANY_ACT); - break; - - case SS_ACTIVE_HIGH: - codsp_write_sop_char(duslic_id, channel, BCR1_ADDR, v & ~(BCR1_ACTR | BCR1_ACTL)); - codsp_set_ciop_m(duslic_id, channel, CODSP_M_ANY_ACT); - break; - - case SS_ACTIVE_RING: - case SS_ONHOOKTRNSM: - codsp_write_sop_char(duslic_id, channel, BCR1_ADDR, (v & ~BCR1_ACTL) | BCR1_ACTR); - codsp_set_ciop_m(duslic_id, channel, CODSP_M_ANY_ACT); - break; - - case SS_STANDBY: - codsp_write_sop_char(duslic_id, channel, BCR1_ADDR, v & ~(BCR1_ACTL | BCR1_ACTR)); - codsp_set_ciop_m(duslic_id, channel, CODSP_M_SLEEP_PWRDN); - break; - - case SS_OPEN_CIRCUIT: - codsp_set_ciop_m(duslic_id, channel, CODSP_M_PWRDN_HIZ); - break; - - case SS_RINGING: - codsp_set_ciop_m(duslic_id, channel, CODSP_M_RING); - break; - - case SS_RING_PAUSE: - codsp_set_ciop_m(duslic_id, channel, CODSP_M_RING_PAUSE); - break; - } -} - -const unsigned char Ring_Sin_28Vrms_25Hz[8] = { 0x90, 0x30, 0x1B, 0xC0, 0xC3, 0x9C, 0x88, 0x00 }; -const unsigned char Max_HookRingTh[3] = { 0x7B, 0x41, 0x62 }; - -void retrieve_slic_state(int slic_id) -{ - int duslic_id = slic_id >> 1; - int channel = slic_id & 1; - - /* Retrieve the state of the SLICs */ - codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR, 0x00); - - /* wait at least 1000us to clear the LM_OK and 500us to set the LM_OK ==> for the LM to make the first Measurement */ - udelay(10000); - - codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK); - codsp_set_slic(duslic_id, channel, SS_ACTIVE_HIGH); - codsp_write_sop_char(duslic_id, channel, LMCR3_ADDR, 0x40); - - /* Program Default Hook Ring thresholds */ - codsp_write_cop_block(duslic_id, channel, dc_coeffs[1].addr, dc_coeffs[1].values); - - /* Now program Hook Threshold while Ring and ac RingTrip to max values */ - codsp_write_cop_block(duslic_id, channel, dc_coeffs[3].addr, dc_coeffs[3].values); - - codsp_write_sop_short(duslic_id, channel, OFR1_ADDR, 0x0000); - - udelay(40000); -} - -int wait_level_metering_finish(int duslic_id, int channel) -{ - int cnt; - - for (cnt = 0; cnt < 1000 && - (codsp_read_sop_char(duslic_id, channel, INTREG2_ADDR) & LM_OK_SRC_IRG_2) == 0; cnt++) { } - - return cnt != 1000; -} - -int measure_on_hook_voltages(int slic_id, long *vdd, - long *v_oh_H, long *v_oh_L, long *ring_mean_v, long *ring_rms_v) -{ - short LM_Result, Offset_Compensation; /* Signed 16 bit */ - long int VDD, VDD_diff, V_in, V_out, Divider_Ratio, Vout_diff ; - unsigned char err_mask = 0; - int duslic_id = slic_id >> 1; - int channel = slic_id & 1; - int i; - - /* measure VDD */ - /* Now select the VDD level Measurement (but first of all Hold the DC characteristic) */ - codsp_write_sop_char(duslic_id, channel, TSTR5_ADDR, TSTR5_DC_HOLD); - - /* Activate Test Mode ==> To Enable DC Hold !!! */ - /* (else the LMRES is treated as Feeding Current and the Feeding voltage changes */ - /* imediatelly (after 500us when the LMRES Registers is updated for the first time after selection of (IO4-IO3) measurement !!!!))*/ - codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_TEST_EN | LMCR1_LM_THM | LMCR1_LM_MASK); - - udelay(40000); - - /* Now I Can select what to measure by DC Level Meter (select IO4-IO3) */ - codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR, LMCR2_LM_SEL_VDD); - - /* wait at least 1000us to clear the LM_OK and 500us to set the LM_OK ==> for the LM to make the first Measurement */ - udelay(10000); - - /* Now Read the LM Result Registers */ - LM_Result = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR); - VDD = (-1)*((((long int)LM_Result) * 390L ) >> 15) ; /* VDDx100 */ - - *vdd = VDD; - - VDD_diff = VDD - TARGET_VDDx100; - - if (VDD_diff < 0) - VDD_diff = -VDD_diff; - - if (VDD_diff > VDD_MAX_DIFFx100) - err_mask |= 1; - - Divider_Ratio = TARGET_V_DIVIDER_RATIO_x100; - - codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR, 0x00); - codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK); - - codsp_set_slic(duslic_id, channel, SS_ACTIVE_HIGH); /* Go back to ONHOOK Voltage */ - - udelay(40000); - - codsp_write_sop_char(duslic_id, channel, - LMCR1_ADDR, LMCR1_TEST_EN | LMCR1_LM_THM | LMCR1_LM_MASK); - - udelay(40000); - - /* Now I Can select what to measure by DC Level Meter (select IO4-IO3) */ - codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR, LMCR2_LM_SEL_IO4_MINUS_IO3); - - /* wait at least 1000us to clear the LM_OK and 500us to set the LM_OK ==> for the LM to make the first Measurement */ - udelay(10000); - - /* Now Read the LM Result Registers */ - LM_Result = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR); - V_in = (-1)* ((((long int)LM_Result) * V_AD_x10000 ) >> 15) ; /* Vin x 10000*/ - - V_out = (V_in * Divider_Ratio) / 10000L ; /* Vout x100 */ - - *v_oh_H = V_out; - - Vout_diff = V_out - TARGET_ONHOOK_BATH_x100; - - if (Vout_diff < 0) - Vout_diff = -Vout_diff; - - if (Vout_diff > V_OUT_BATH_MAX_DIFFx100) - err_mask |= 2; - - codsp_set_slic(duslic_id, channel, SS_ACTIVE); /* Go back to ONHOOK Voltage */ - - udelay(40000); - - /* Now Read the LM Result Registers */ - LM_Result = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR); - - V_in = (-1)* ((((long int)LM_Result) * V_AD_x10000 ) >> 15) ; /* Vin x 10000*/ - - V_out = (V_in * Divider_Ratio) / 10000L ; /* Vout x100 */ - - *v_oh_L = V_out; - - Vout_diff = V_out - TARGET_ONHOOK_BATL_x100; - - if (Vout_diff < 0) - Vout_diff = -Vout_diff; - - if (Vout_diff > V_OUT_BATL_MAX_DIFFx100) - err_mask |= 4; - - /* perform ring tests */ - - codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR, 0x00); - codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK); - - udelay(40000); - - codsp_write_sop_char(duslic_id, channel, LMCR3_ADDR, LMCR3_RTR_SEL | LMCR3_RNG_OFFSET_NONE); - - /* Now program RO1 =0V , Ring Amplitude and frequency and shift factor K = 1 (LMDC=0x0088)*/ - codsp_write_cop_block(duslic_id, channel, RING_PARAMS_START_ADDR, Ring_Sin_28Vrms_25Hz); - - /* By Default RO1 is selected when ringing RNG-OFFSET = 00 */ - - /* Now program Hook Threshold while Ring and ac RingTrip to max values */ - for(i = 0; i < sizeof(Max_HookRingTh); i++) - codsp_write_cop_char(duslic_id, channel, HOOK_THRESH_RING_START_ADDR + i, Max_HookRingTh[i]); - - codsp_write_sop_short(duslic_id, channel, OFR1_ADDR, 0x0000); - - codsp_set_slic(duslic_id, channel, SS_RING_PAUSE); /* Start Ringing */ - - /* select source for the levelmeter to be IO4-IO3 */ - codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR, LMCR2_LM_SEL_IO4_MINUS_IO3); - - udelay(40000); - - /* Before Enabling Level Meter Programm the apropriate shift factor K_INTDC=(4 if Rectifier Enabled and 2 if Rectifier Disabled) */ - codsp_write_cop_char(duslic_id, channel, RING_PARAMS_START_ADDR + 7, K_INTDC_RECT_OFF); - - udelay(10000); - - /* Enable LevelMeter to Integrate only once (Rectifier Disabled) */ - codsp_write_sop_char(duslic_id, channel, - LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_EN | LMCR1_LM_ONCE); - - udelay(40000); /* Integration Period == Ring Period = 40ms (for 25Hz Ring) */ - - if (wait_level_metering_finish(duslic_id, channel)) { - - udelay(10000); /* To be sure that Integration Results are Valid wait at least 500us !!! */ - - /* Now Read the LM Result Registers (Will be valid until LM_EN becomes zero again( after that the Result is updated every 500us) ) */ - Offset_Compensation = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR); - Offset_Compensation = (-1) * ((Offset_Compensation * (1 << K_INTDC_RECT_OFF)) / N_SAMPLES); - - /* Disable LevelMeter ==> In order to be able to restart Integrator again (for the next integration) */ - codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_ONCE); - - /* Now programm Integrator Offset Registers !!! */ - codsp_write_sop_short(duslic_id, channel, OFR1_ADDR, Offset_Compensation); - - codsp_set_slic(duslic_id, channel, SS_RINGING); /* Start Ringing */ - - udelay(40000); - - /* Reenable Level Meter Integrator (The Result will be valid after Integration Period=Ring Period and until LN_EN become zero again) */ - codsp_write_sop_char(duslic_id, channel, - LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_EN | LMCR1_LM_ONCE); - - udelay(40000); /* Integration Period == Ring Period = 40ms (for 25Hz Ring) */ - - /* Poll the LM_OK bit to see when Integration Result is Ready */ - if (wait_level_metering_finish(duslic_id, channel)) { - - udelay(10000); /* wait at least 500us to be sure that the Integration Result are valid !!! */ - - /* Now Read the LM Result Registers (They will hold their value until LM_EN become zero again */ - /* ==>After that Result Regs will be updated every 500us !!!) */ - LM_Result = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR); - V_in = (-1) * ( ( (((long int)LM_Result) * V_AD_x10000) / N_SAMPLES) >> (15 - K_INTDC_RECT_OFF)) ; /* Vin x 10000*/ - - V_out = (V_in * Divider_Ratio) / 10000L ; /* Vout x100 */ - - if (V_out < 0) - V_out= -V_out; - - if (V_out > MAX_V_RING_MEANx100) - err_mask |= 8; - - *ring_mean_v = V_out; - } else { - err_mask |= 8; - *ring_mean_v = 0; - } - } else { - err_mask |= 8; - *ring_mean_v = 0; - } - - /* Disable LevelMeter ==> In order to be able to restart Integrator again (for the next integration) */ - codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, - LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_ONCE); - codsp_write_sop_short(duslic_id, channel, OFR1_ADDR, 0x0000); - - codsp_set_slic(duslic_id, channel, SS_RING_PAUSE); /* Start Ringing */ - - /* Now Enable Rectifier */ - /* select source for the levelmeter to be IO4-IO3 */ - codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR, - LMCR2_LM_SEL_IO4_MINUS_IO3 | LMCR2_LM_RECT); - - /* Program the apropriate shift factor K_INTDC (in order to avoid Overflow at Integtation Result !!!) */ - codsp_write_cop_char(duslic_id, channel, RING_PARAMS_START_ADDR + 7, K_INTDC_RECT_ON); - - udelay(40000); - - /* Reenable Level Meter Integrator (The Result will be valid after Integration Period=Ring Period and until LN_EN become zero again) */ - codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, - LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_EN | LMCR1_LM_ONCE); - - udelay(40000); - - /* Poll the LM_OK bit to see when Integration Result is Ready */ - if (wait_level_metering_finish(duslic_id, channel)) { - - udelay(10000); - - /* Now Read the LM Result Registers (They will hold their value until LM_EN become zero again */ - /* ==>After that Result Regs will be updated every 500us !!!) */ - Offset_Compensation = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR); - Offset_Compensation = (-1) * ((Offset_Compensation * (1 << K_INTDC_RECT_ON)) / N_SAMPLES); - - /* Disable LevelMeter ==> In order to be able to restart Integrator again (for the next integration) */ - codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_ONCE); - - /* Now programm Integrator Offset Registers !!! */ - codsp_write_sop_short(duslic_id, channel, OFR1_ADDR, Offset_Compensation); - - /* Be sure that a Ring is generated !!!! */ - codsp_set_slic(duslic_id, channel, SS_RINGING); /* Start Ringing again */ - - udelay(40000); - - /* Reenable Level Meter Integrator (The Result will be valid after Integration Period=Ring Period and until LN_EN become zero again) */ - codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, - LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_EN | LMCR1_LM_ONCE); - - udelay(40000); - - /* Poll the LM_OK bit to see when Integration Result is Ready */ - if (wait_level_metering_finish(duslic_id, channel)) { - - udelay(10000); - - /* Now Read the LM Result Registers (They will hold their value until LM_EN become zero again */ - /* ==>After that Result Regs will be updated every 500us !!!) */ - LM_Result = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR); - V_in = (-1) * ( ( (((long int)LM_Result) * V_AD_x10000) / N_SAMPLES) >> (15 - K_INTDC_RECT_ON) ) ; /* Vin x 10000*/ - - V_out = (((V_in * Divider_Ratio) / 10000L) * RMS_MULTIPLIERx100) / 100 ; /* Vout_RMS x100 */ - if (V_out < 0) - V_out = -V_out; - - Vout_diff = (V_out - TARGET_V_RING_RMSx100); - - if (Vout_diff < 0) - Vout_diff = -Vout_diff; - - if (Vout_diff > V_RMS_RING_MAX_DIFFx100) - err_mask |= 16; - - *ring_rms_v = V_out; - } else { - err_mask |= 16; - *ring_rms_v = 0; - } - } else { - err_mask |= 16; - *ring_rms_v = 0; - } - /* Disable LevelMeter ==> In order to be able to restart Integrator again (for the next integration) */ - codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK); - - retrieve_slic_state(slic_id); - - return(err_mask); -} - -int test_dtmf(int slic_id) -{ - unsigned char code; - unsigned char b; - unsigned int intreg; - int duslic_id = slic_id >> 1; - int channel = slic_id & 1; - - for (code = 0; code < 16; code++) { - b = codsp_read_sop_char(duslic_id, channel, DSCR_ADDR); - codsp_write_sop_char(duslic_id, channel, DSCR_ADDR, - (b & ~(DSCR_PTG | DSCR_DG_KEY(15))) | DSCR_DG_KEY(code) | DSCR_TG1_EN | DSCR_TG2_EN); - udelay(80000); - - intreg = codsp_read_sop_int(duslic_id, channel, INTREG1_ADDR); - if ((intreg & CODSP_INTREG_INT_CH) == 0) - break; - - if ((intreg & CODSP_INTREG_DTMF_OK) == 0 || - codsp_dtmf_map[(intreg >> 10) & 15] != codsp_dtmf_map[code]) - break; - - b = codsp_read_sop_char(duslic_id, channel, DSCR_ADDR); - codsp_write_sop_char(duslic_id, channel, DSCR_ADDR, - b & ~(DSCR_COR8 | DSCR_TG1_EN | DSCR_TG2_EN)); - - udelay(80000); - - intreg = codsp_read_sop_int(duslic_id, channel, INTREG1_ADDR); /* for dtmf_pause irq */ - } - - if (code != 16) { - b = codsp_read_sop_char(duslic_id, channel, DSCR_ADDR); /* stop dtmf */ - codsp_write_sop_char(duslic_id, channel, DSCR_ADDR, - b & ~(DSCR_COR8 | DSCR_TG1_EN | DSCR_TG2_EN)); - return(1); - } - - return(0); -} - -void data_up_persist_time(int duslic_id, int channel, int time_ms) -{ - unsigned char b; - - b = codsp_read_sop_char(duslic_id, channel, IOCTL3_ADDR); - b = (b & 0x0F) | ((time_ms & 0x0F) << 4); - codsp_write_sop_char(duslic_id, channel, IOCTL3_ADDR, b); -} - -static void program_dtmf_params(int duslic_id, int channel) -{ - unsigned char b; - - codsp_write_pop_char(duslic_id, channel, DTMF_LEV_ADDR, 0x10); - codsp_write_pop_char(duslic_id, channel, DTMF_TWI_ADDR, 0x0C); - codsp_write_pop_char(duslic_id, channel, DTMF_NCF_H_ADDR, 0x79); - codsp_write_pop_char(duslic_id, channel, DTMF_NCF_L_ADDR, 0x10); - codsp_write_pop_char(duslic_id, channel, DTMF_NBW_H_ADDR, 0x02); - codsp_write_pop_char(duslic_id, channel, DTMF_NBW_L_ADDR, 0xFB); - codsp_write_pop_char(duslic_id, channel, DTMF_GAIN_ADDR, 0x91); - codsp_write_pop_char(duslic_id, channel, DTMF_RES1_ADDR, 0x00); - codsp_write_pop_char(duslic_id, channel, DTMF_RES2_ADDR, 0x00); - codsp_write_pop_char(duslic_id, channel, DTMF_RES3_ADDR, 0x00); - - b = codsp_read_sop_char(duslic_id, channel, BCR5_ADDR); - codsp_write_sop_char(duslic_id, channel, BCR5_ADDR, b | BCR5_DTMF_EN); -} - -static void codsp_channel_full_reset(int duslic_id, int channel) -{ - - program_coeffs(duslic_id, channel, ac_coeffs, sizeof(ac_coeffs) / sizeof(struct _coeffs)); - program_coeffs(duslic_id, channel, dc_coeffs, sizeof(dc_coeffs) / sizeof(struct _coeffs)); - - /* program basic configuration registers */ - codsp_write_sop_char(duslic_id, channel, BCR1_ADDR, 0x01); - codsp_write_sop_char(duslic_id, channel, BCR2_ADDR, 0x41); - codsp_write_sop_char(duslic_id, channel, BCR3_ADDR, 0x43); - codsp_write_sop_char(duslic_id, channel, BCR4_ADDR, 0x00); - codsp_write_sop_char(duslic_id, channel, BCR5_ADDR, 0x00); - - codsp_write_sop_char(duslic_id, channel, DSCR_ADDR, 0x04); /* PG */ - - program_dtmf_params(duslic_id, channel); - - codsp_write_sop_char(duslic_id, channel, LMCR3_ADDR, 0x40); /* RingTRip_SEL */ - - data_up_persist_time(duslic_id, channel, 4); - - codsp_write_sop_char(duslic_id, channel, MASK_ADDR, 0xFF); /* All interrupts masked */ - - codsp_set_slic(duslic_id, channel, SS_ACTIVE_HIGH); -} - -static int codsp_chip_full_reset(int duslic_id) -{ - int i, cnt; - int intreg[NUM_CHANNELS]; - unsigned char pcm_resync; - unsigned char revision; - - codsp_reset_chip(duslic_id); - - udelay(2000); - - for (i = 0; i < NUM_CHANNELS; i++) - intreg[i] = codsp_read_sop_int(duslic_id, i, INTREG1_ADDR); - - udelay(1500); - - if (_PORTC_GET(com_hook_mask_tab[duslic_id]) == 0) { - printf("_HOOK(%d) stayed low\n", duslic_id); - return -1; - } - - for (pcm_resync = 0, i = 0; i < NUM_CHANNELS; i++) { - if (intreg[i] & CODSP_INTREG_SYNC_FAIL) - pcm_resync |= 1 << i; - } - - for (cnt = 0; cnt < 5 && pcm_resync; cnt++) { - for (i = 0; i < NUM_CHANNELS; i++) - codsp_resync_channel(duslic_id, i); - - udelay(2000); - - pcm_resync = 0; - - for (i = 0; i < NUM_CHANNELS; i++) { - if (codsp_read_sop_int(duslic_id, i, INTREG1_ADDR) & CODSP_INTREG_SYNC_FAIL) - pcm_resync |= 1 << i; - } - } - - if (cnt == 5) { - printf("PCM_Resync(%u) not completed\n", duslic_id); - return -2; - } - - revision = codsp_read_sop_char(duslic_id, 0, REVISION_ADDR); - printf("DuSLIC#%d hardware version %d.%d\r\n", duslic_id, (revision & 0xF0) >> 4, revision & 0x0F); - - codsp_write_sop_char(duslic_id, 0, XCR_ADDR, 0x80); /* EDSP_EN */ - - for (i = 0; i < NUM_CHANNELS; i++) { - codsp_write_sop_char(duslic_id, i, PCMC1_ADDR, 0x01); - codsp_channel_full_reset(duslic_id, i); - } - - return 0; -} - -int slic_self_test(int duslic_mask) -{ - int slic; - int i; - int r; - long vdd, v_oh_H, v_oh_L, ring_mean_v, ring_rms_v; - const char *err_txt[] = { "VDD", "V_OH_H", "V_OH_L", "V_RING_MEAN", "V_RING_RMS" }; - int error = 0; - - for (slic = 0; slic < MAX_SLICS; slic++) { /* voltages self test */ - if (duslic_mask & (1 << (slic >> 1))) { - r = measure_on_hook_voltages(slic, &vdd, - &v_oh_H, &v_oh_L, &ring_mean_v, &ring_rms_v); - - printf("SLIC %u measured voltages (x100):\n\t" - "VDD = %ld\tV_OH_H = %ld\tV_OH_L = %ld\tV_RING_MEAN = %ld\tV_RING_RMS = %ld\n", - slic, vdd, v_oh_H, v_oh_L, ring_mean_v, ring_rms_v); - - if (r != 0) - error |= 1 << slic; - - for (i = 0; i < 5; i++) - if (r & (1 << i)) - printf("\t%s out of range\n", err_txt[i]); - } - } - - for (slic = 0; slic < MAX_SLICS; slic++) { /* voice path self test */ - if (duslic_mask & (1 << (slic >> 1))) { - printf("SLIC %u VOICE PATH...CHECKING", slic); - printf("\rSLIC %u VOICE PATH...%s\n", slic, - (r = test_dtmf(slic)) != 0 ? "FAILED " : "PASSED "); - - if (r != 0) - error |= 1 << slic; - } - } - - return(error); -} - -#if defined(CONFIG_NETTA_ISDN) - -#define SPIENS1 (1 << (31 - 15)) -#define SPIENS2 (1 << (31 - 19)) - -static const int spiens_mask_tab[2] = { SPIENS1, SPIENS2 }; -int s_initialized = 0; - -static inline unsigned int s_transfer_internal(int s_id, unsigned int address, unsigned int value) -{ - unsigned int rx, v; - - _PORTB_SET(spiens_mask_tab[s_id], 0); - - rx = __SPI_Transfer(address); - - switch (address & 0xF0) { - case 0x60: /* write byte register */ - case 0x70: - rx = __SPI_Transfer(value); - break; - - case 0xE0: /* read R6 register */ - v = __SPI_Transfer(0); - - rx = (rx << 8) | v; - - break; - - case 0xF0: /* read byte register */ - rx = __SPI_Transfer(0); - - break; - } - - _PORTB_SET(spiens_mask_tab[s_id], 1); - - return rx; -} - -static void s_write_BR(int s_id, unsigned int regno, unsigned int val) -{ - unsigned int address; - - address = 0x70 | (regno & 15); - val &= 0xff; - - (void)s_transfer_internal(s_id, address, val); -} - -static void s_write_OR(int s_id, unsigned int regno, unsigned int val) -{ - unsigned int address; - - address = 0x70 | (regno & 15); - val &= 0xff; - - (void)s_transfer_internal(s_id, address, val); -} - -static void s_write_NR(int s_id, unsigned int regno, unsigned int val) -{ - unsigned int address; - - address = (regno & 7) << 4; - val &= 0xf; - - (void)s_transfer_internal(s_id, address | val, 0x00); -} - -#define BR7_IFR 0x08 /* IDL2 free run */ -#define BR7_ICSLSB 0x04 /* IDL2 clock speed LSB */ - -#define BR15_OVRL_REG_EN 0x80 -#define OR7_D3VR 0x80 /* disable 3V regulator */ - -#define OR8_TEME 0x10 /* TE mode enable */ -#define OR8_MME 0x08 /* master mode enable */ - -void s_initialize(void) -{ - int s_id; - - for (s_id = 0; s_id < 2; s_id++) { - s_write_BR(s_id, 7, BR7_IFR | BR7_ICSLSB); - s_write_BR(s_id, 15, BR15_OVRL_REG_EN); - s_write_OR(s_id, 8, OR8_TEME | OR8_MME); - s_write_OR(s_id, 7, OR7_D3VR); - s_write_OR(s_id, 6, 0); - s_write_BR(s_id, 15, 0); - s_write_NR(s_id, 3, 0); - } -} - -#endif - -int board_post_codec(int flags) -{ - int j; - int r; - int duslic_mask; - - printf("board_post_dsp\n"); - -#if defined(CONFIG_NETTA_ISDN) - if (s_initialized == 0) { - s_initialize(); - s_initialized = 1; - - printf("s_initialized\n"); - - udelay(20000); - } -#endif - duslic_mask = 0; - - for (j = 0; j < MAX_DUSLIC; j++) { - if (codsp_chip_full_reset(j) < 0) - printf("Error initializing DuSLIC#%d\n", j); - else - duslic_mask |= 1 << j; - } - - if (duslic_mask != 0) { - printf("Testing SLICs...\n"); - - r = slic_self_test(duslic_mask); - for (j = 0; j < MAX_SLICS; j++) { - if (duslic_mask & (1 << (j >> 1))) - printf("SLIC %u...%s\n", j, r & (1 << j) ? "FAULTY" : "OK"); - } - } - printf("DuSLIC self test finished\n"); - - return 0; /* return -1 on error */ -} diff --git a/board/netta/dsp.c b/board/netta/dsp.c deleted file mode 100644 index cd57647..0000000 --- a/board/netta/dsp.c +++ /dev/null @@ -1,1208 +0,0 @@ -/* - * Intracom TI6711/TI6412 DSP - */ - -#include -#include - -#include "mpc8xx.h" - -struct ram_range { - u32 start; - u32 size; -}; - -#if defined(CONFIG_NETTA_6412) - -static const struct ram_range int_ram[] = { - { 0x00000000U, 0x00040000U }, -}; - -static const struct ram_range ext_ram[] = { - { 0x80000000U, 0x00100000U }, -}; - -static const struct ram_range ranges[] = { - { 0x00000000U, 0x00040000U }, - { 0x80000000U, 0x00100000U }, -}; - -static inline u16 bit_invert(u16 d) -{ - register u8 i; - register u16 r; - register u16 bit; - - r = 0; - for (i = 0; i < 16; i++) { - bit = d & (1 << i); - if (bit != 0) - r |= 1 << (15 - i); - } - return r; -} - -#else - -static const struct ram_range int_ram[] = { - { 0x00000000U, 0x00010000U }, -}; - -static const struct ram_range ext_ram[] = { - { 0x80000000U, 0x00100000U }, -}; - -static const struct ram_range ranges[] = { - { 0x00000000U, 0x00010000U }, - { 0x80000000U, 0x00100000U }, -}; - -#endif - -/*******************************************************************************************************/ - -static inline int addr_in_int_ram(u32 addr) -{ - int i; - - for (i = 0; i < sizeof(int_ram)/sizeof(int_ram[0]); i++) - if (addr >= int_ram[i].start && addr < int_ram[i].start + int_ram[i].size) - return 1; - - return 0; -} - -static inline int addr_in_ext_ram(u32 addr) -{ - int i; - - for (i = 0; i < sizeof(ext_ram)/sizeof(ext_ram[0]); i++) - if (addr >= ext_ram[i].start && addr < ext_ram[i].start + ext_ram[i].size) - return 1; - - return 0; -} - -/*******************************************************************************************************/ - -#define DSP_HPIC 0x0 -#define DSP_HPIA 0x4 -#define DSP_HPID1 0x8 -#define DSP_HPID2 0xC - -static u32 dummy_delay; -static volatile u32 *ti6711_delay = &dummy_delay; - -static inline void dsp_go_slow(void) -{ - volatile memctl8xx_t *memctl = &((immap_t *)CONFIG_SYS_IMMR)->im_memctl; -#if defined(CONFIG_NETTA_6412) - memctl->memc_or6 |= OR_SCY_15_CLK | OR_TRLX; -#else - memctl->memc_or2 |= OR_SCY_15_CLK | OR_TRLX; -#endif - memctl->memc_or5 |= OR_SCY_15_CLK | OR_TRLX; - - ti6711_delay = (u32 *)DUMMY_BASE; -} - -static inline void dsp_go_fast(void) -{ - volatile memctl8xx_t *memctl = &((immap_t *)CONFIG_SYS_IMMR)->im_memctl; -#if defined(CONFIG_NETTA_6412) - memctl->memc_or6 = (memctl->memc_or6 & ~(OR_SCY_15_CLK | OR_TRLX)) | OR_SCY_0_CLK; -#else - memctl->memc_or2 = (memctl->memc_or2 & ~(OR_SCY_15_CLK | OR_TRLX)) | OR_SCY_3_CLK; -#endif - memctl->memc_or5 = (memctl->memc_or5 & ~(OR_SCY_15_CLK | OR_TRLX)) | OR_SCY_0_CLK; - - ti6711_delay = &dummy_delay; -} - -/*******************************************************************************************************/ - -static inline void dsp_delay(void) -{ - /* perform ti6711_delay chip select read to have a small delay */ - (void) *(volatile u32 *)ti6711_delay; -} - -static inline u16 dsp_read_hpic(void) -{ -#if defined(CONFIG_NETTA_6412) - return bit_invert(*((volatile u16 *)DSP_BASE)); -#else - return *((volatile u16 *)DSP_BASE); -#endif -} - -static inline void dsp_write_hpic(u16 val) -{ -#if defined(CONFIG_NETTA_6412) - *((volatile u16 *)DSP_BASE) = bit_invert(val); -#else - *((volatile u16 *)DSP_BASE) = val; -#endif -} - -static inline void dsp_reset(void) -{ -#if defined(CONFIG_NETTA_6412) - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat &= ~(1 << (15 - 15)); - udelay(500); - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat |= (1 << (15 - 15)); - udelay(500); -#else - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat &= ~(1 << (15 - 7)); - udelay(250); - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat |= (1 << (15 - 7)); - udelay(250); -#endif -} - -static inline u32 dsp_read_hpic_word(u32 addr) -{ - u32 val; - volatile u16 *p; -#if defined(CONFIG_NETTA_6412) - p = (volatile u16 *)((volatile u8 *)DSP_BASE + addr); - - val = ((u32) bit_invert(p[0]) << 16); - /* dsp_delay(); */ - - val |= bit_invert(p[1]); - /* dsp_delay(); */ -#else - p = (volatile u16 *)((volatile u8 *)DSP_BASE + addr); - - val = ((u32) p[0] << 16); - dsp_delay(); - - val |= p[1]; - dsp_delay(); -#endif - return val; -} - -static inline u16 dsp_read_hpic_hi_hword(u32 addr) -{ -#if defined(CONFIG_NETTA_6412) - return bit_invert(*(volatile u16 *)((volatile u8 *)DSP_BASE + addr)); -#else - return *(volatile u16 *)((volatile u8 *)DSP_BASE + addr); -#endif -} - -static inline u16 dsp_read_hpic_lo_hword(u32 addr) -{ -#if defined(CONFIG_NETTA_6412) - return bit_invert(*(volatile u16 *)((volatile u8 *)DSP_BASE + addr + 2)); -#else - return *(volatile u16 *)((volatile u8 *)DSP_BASE + addr + 2); -#endif -} - -static inline void dsp_wait_hrdy(void) -{ - int i; - - i = 0; -#if defined(CONFIG_NETTA_6412) - while (i < 1000 && (dsp_read_hpic_word(DSP_HPIC) & 0x08) == 0) { -#else - while (i < 1000 && (dsp_read_hpic() & 0x08) == 0) { -#endif - dsp_delay(); - i++; - } -} - -static inline void dsp_write_hpic_word(u32 addr, u32 val) -{ - volatile u16 *p; -#if defined(CONFIG_NETTA_6412) - p = (volatile u16 *)((volatile u8 *)DSP_BASE + addr); - p[0] = bit_invert((u16)(val >> 16)); - /* dsp_delay(); */ - - p[1] = bit_invert((u16)val); - /* dsp_delay(); */ -#else - p = (volatile u16 *)((volatile u8 *)DSP_BASE + addr); - p[0] = (u16)(val >> 16); - dsp_delay(); - - p[1] = (u16)val; - dsp_delay(); -#endif -} - -static inline void dsp_write_hpic_hi_hword(u32 addr, u16 val_h) -{ -#if defined(CONFIG_NETTA_6412) - *(volatile u16 *)((volatile u8 *)DSP_BASE + addr) = bit_invert(val_h); -#else - - *(volatile u16 *)((volatile u8 *)DSP_BASE + addr) = val_h; -#endif -} - -static inline void dsp_write_hpic_lo_hword(u32 addr, u16 val_l) -{ -#if defined(CONFIG_NETTA_6412) - *(volatile u16 *)((volatile u8 *)DSP_BASE + addr + 2) = bit_invert(val_l); -#else - *(volatile u16 *)((volatile u8 *)DSP_BASE + addr + 2) = val_l; -#endif -} - -/********************************************************************/ - -static inline void c62_write_word(u32 addr, u32 val) -{ - dsp_write_hpic_hi_hword(DSP_HPIA, (u16)(addr >> 16)); -#if !defined(CONFIG_NETTA_6412) - dsp_delay(); -#endif - dsp_write_hpic_lo_hword(DSP_HPIA, (u16)addr); -#if !defined(CONFIG_NETTA_6412) - dsp_delay(); -#endif - - dsp_wait_hrdy(); -#if !defined(CONFIG_NETTA_6412) - dsp_delay(); -#endif - dsp_write_hpic_hi_hword(DSP_HPID2, (u16)(val >> 16)); -#if !defined(CONFIG_NETTA_6412) - dsp_delay(); - - /* dsp_wait_hrdy(); - dsp_delay(); */ -#endif - dsp_write_hpic_lo_hword(DSP_HPID2, (u16)val); -#if !defined(CONFIG_NETTA_6412) - dsp_delay(); -#endif -} - -static u32 c62_read_word(u32 addr) -{ - u32 val; - - dsp_write_hpic_hi_hword(DSP_HPIA, (u16)(addr >> 16)); -#if !defined(CONFIG_NETTA_6412) - dsp_delay(); -#endif - dsp_write_hpic_lo_hword(DSP_HPIA, (u16)addr); -#if !defined(CONFIG_NETTA_6412) - dsp_delay(); -#endif - - /* FETCH */ -#if defined(CONFIG_NETTA_6412) - dsp_write_hpic_word(DSP_HPIC, 0x00100010); -#else - dsp_write_hpic(0x10); - dsp_delay(); -#endif - dsp_wait_hrdy(); -#if !defined(CONFIG_NETTA_6412) - dsp_delay(); -#endif - val = (u32)dsp_read_hpic_hi_hword(DSP_HPID2) << 16; -#if !defined(CONFIG_NETTA_6412) - dsp_delay(); - - /* dsp_wait_hrdy(); - dsp_delay(); */ -#endif - val |= dsp_read_hpic_lo_hword(DSP_HPID2); -#if !defined(CONFIG_NETTA_6412) - dsp_delay(); -#endif - return val; -} - -static inline void c62_read(u32 addr, u32 *buffer, int numdata) -{ - int i; - - if (numdata <= 0) - return; - - for (i = 0; i < numdata; i++) { - *buffer++ = c62_read_word(addr); - addr += 4; - } -} - -static inline u32 c62_checksum(u32 addr, int numdata) -{ - int i; - u32 chksum; - - chksum = 0; - for (i = 0; i < numdata; i++) { - chksum += c62_read_word(addr); - addr += 4; - } - - return chksum; -} - -static inline void c62_write(u32 addr, const u32 *buffer, int numdata) -{ - int i; - - if (numdata <= 0) - return; - - for (i = 0; i < numdata; i++) { - c62_write_word(addr, *buffer++); - addr += 4; - } -} - -static inline int c62_write_word_validated(u32 addr, u32 val) -{ - c62_write_word(addr, val); - return c62_read_word(addr) == val ? 0 : -1; -} - -static inline int c62_write_validated(u32 addr, const u32 *buffer, int numdata) -{ - int i, r; - - if (numdata <= 0) - return 0; - - for (i = 0; i < numdata; i++) { - r = c62_write_word_validated(addr, *buffer++); - if (r < 0) - return r; - addr += 4; - } - return 0; -} - -#if defined(CONFIG_NETTA_6412) - -#define DRAM_REGS_BASE 0x1800000 - -#define GBLCTL DRAM_REGS_BASE -#define CECTL1 (DRAM_REGS_BASE + 0x4) -#define CECTL0 (DRAM_REGS_BASE + 0x8) -#define CECTL2 (DRAM_REGS_BASE + 0x10) -#define CECTL3 (DRAM_REGS_BASE + 0x14) -#define SDCTL (DRAM_REGS_BASE + 0x18) -#define SDTIM (DRAM_REGS_BASE + 0x1C) -#define SDEXT (DRAM_REGS_BASE + 0x20) -#define SESEC1 (DRAM_REGS_BASE + 0x44) -#define SESEC0 (DRAM_REGS_BASE + 0x48) -#define SESEC2 (DRAM_REGS_BASE + 0x50) -#define SESEC3 (DRAM_REGS_BASE + 0x54) - -#define MAR128 0x1848200 -#define MAR129 0x1848204 - -void dsp_dram_initialize(void) -{ - c62_write_word(GBLCTL, 0x120E4); - c62_write_word(CECTL1, 0x18); - c62_write_word(CECTL0, 0xD0); - c62_write_word(CECTL2, 0x18); - c62_write_word(CECTL3, 0x18); - c62_write_word(SDCTL, 0x47115000); - c62_write_word(SDTIM, 1536); - c62_write_word(SDEXT, 0x534A9); -#if 0 - c62_write_word(SESEC1, 0); - c62_write_word(SESEC0, 0); - c62_write_word(SESEC2, 0); - c62_write_word(SESEC3, 0); -#endif - c62_write_word(MAR128, 1); - c62_write_word(MAR129, 0); -} - -#endif - -static inline void dsp_init_hpic(void) -{ - int i; - volatile u16 *p; -#if defined(CONFIG_NETTA_6412) - dsp_go_fast(); -#else - dsp_go_slow(); -#endif - i = 0; -#if defined(CONFIG_NETTA_6412) - while (i < 1000 && (dsp_read_hpic_word(DSP_HPIC) & 0x08) == 0) { -#else - while (i < 1000 && (dsp_read_hpic() & 0x08) == 0) { -#endif - dsp_delay(); - i++; - } - - if (i == 1000) - printf("HRDY stuck\n"); - - dsp_delay(); - - /* write control register */ - p = (volatile u16 *)DSP_BASE; - p[0] = 0x0000; - dsp_delay(); - p[1] = 0x0000; - dsp_delay(); - -#if !defined(CONFIG_NETTA_6412) - dsp_go_fast(); -#endif -} - -/***********************************************************************************************************/ - -#if !defined(CONFIG_NETTA_6412) - -static const u8 bootstrap_rbin[5084] = { - 0x52, 0x42, 0x49, 0x4e, 0xc5, 0xa9, 0x9f, 0x1a, 0x00, 0x00, 0x00, 0x02, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x20, 0x00, - 0x00, 0x00, 0x11, 0xc0, 0x00, 0x17, 0x94, 0x2a, 0x00, 0x00, 0x00, 0x6a, - 0x00, 0x00, 0x03, 0x62, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, - 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, - 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, - 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, - 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, - 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, - 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x17, 0x94, 0x2a, 0x00, 0x00, 0x00, 0x6a, 0x00, 0x00, 0x03, 0x62, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x18, 0x00, 0xe2, - 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, - 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, - 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, - 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, - 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x90, 0x10, 0x5a, - 0x00, 0x19, 0x2e, 0x28, 0x00, 0x00, 0x00, 0x68, 0x00, 0x00, 0x02, 0x64, - 0x02, 0x00, 0x00, 0xaa, 0x02, 0x10, 0xac, 0xe2, 0x00, 0x00, 0x20, 0x00, - 0x00, 0x00, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x9f, 0x7a, - 0x30, 0x00, 0x08, 0x10, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x04, 0x28, - 0x00, 0x00, 0xc6, 0x69, 0x02, 0x16, 0x4c, 0xa2, 0x02, 0x00, 0x90, 0x7a, - 0x00, 0x10, 0x02, 0xe4, 0x00, 0x00, 0x60, 0x00, 0x00, 0x02, 0xd6, 0xc8, - 0x00, 0x10, 0x02, 0xf4, 0x03, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, - 0x03, 0x1a, 0xf7, 0xca, 0x03, 0x10, 0x02, 0xf6, 0x00, 0x00, 0x04, 0x28, - 0x00, 0x00, 0xc6, 0x69, 0x02, 0x16, 0x4c, 0xa2, 0x02, 0x00, 0x90, 0x7a, - 0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, 0x02, 0x97, 0xcf, 0x5a, - 0x02, 0x90, 0x02, 0xf6, 0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, - 0x02, 0x96, 0x10, 0xca, 0x02, 0x90, 0x02, 0xf6, 0x00, 0x0c, 0x03, 0x62, - 0x00, 0x00, 0x80, 0x00, 0x02, 0x90, 0x10, 0x5a, 0x00, 0x00, 0x04, 0x28, - 0x00, 0x00, 0xc6, 0x69, 0x02, 0x16, 0x4c, 0xa2, 0x02, 0x00, 0x90, 0x7a, - 0x03, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, 0x03, 0x18, 0x2f, 0xda, - 0x03, 0x10, 0x02, 0xf6, 0x03, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, - 0x03, 0x1a, 0x10, 0x8a, 0x03, 0x10, 0x02, 0xf6, 0x00, 0x19, 0x2e, 0x28, - 0x00, 0x00, 0x00, 0x68, 0x00, 0x00, 0x02, 0x64, 0x03, 0x00, 0x00, 0xaa, - 0x02, 0x98, 0xac, 0xe2, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x02, 0x64, - 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0xbf, 0x7a, 0x22, 0x90, 0x02, 0xe6, - 0x00, 0x00, 0x60, 0x00, 0x22, 0x96, 0xd6, 0x8a, 0x22, 0x90, 0x02, 0xf6, - 0x22, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, 0x22, 0x96, 0xf7, 0x8a, - 0x22, 0x90, 0x02, 0xf6, 0x00, 0x0c, 0x03, 0x62, 0x00, 0x00, 0x80, 0x00, - 0x00, 0x0c, 0x03, 0x62, 0x00, 0x00, 0x80, 0x00, 0x00, 0x0c, 0x03, 0x62, - 0x00, 0x00, 0x80, 0x00, 0x00, 0x19, 0x2e, 0x28, 0x00, 0x00, 0x00, 0x68, - 0x00, 0x00, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x02, 0x64, - 0x00, 0x00, 0x60, 0x00, 0x00, 0x80, 0x4f, 0x58, 0x02, 0x00, 0x12, 0x2a, - 0x02, 0x00, 0xc8, 0x6a, 0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, - 0x02, 0x95, 0x8c, 0xca, 0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x12, 0x28, - 0x00, 0x00, 0xc8, 0x68, 0x02, 0x00, 0x02, 0x66, 0x00, 0x00, 0x60, 0x00, - 0x02, 0x11, 0xad, 0xca, 0x02, 0x00, 0x02, 0x76, 0x92, 0x00, 0x12, 0x2a, - 0x92, 0x00, 0xc8, 0x6a, 0x92, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, - 0x92, 0x95, 0x6b, 0xca, 0x92, 0x90, 0x02, 0xf6, 0x80, 0x00, 0x12, 0x28, - 0x80, 0x00, 0xc8, 0x68, 0x82, 0x00, 0x02, 0x66, 0x80, 0x00, 0x12, 0x28, - 0x80, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x20, 0x00, 0x82, 0x11, 0x6b, 0x8a, - 0x82, 0x00, 0x02, 0x76, 0x02, 0x00, 0x12, 0x2a, 0x02, 0x00, 0xc8, 0x6a, - 0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, 0x02, 0x95, 0x4a, 0xca, - 0x02, 0x90, 0x02, 0xf6, 0x90, 0x00, 0x12, 0x28, 0x90, 0x00, 0xc8, 0x68, - 0x92, 0x00, 0x02, 0x66, 0x00, 0x00, 0x60, 0x00, 0x92, 0x11, 0x29, 0xca, - 0x92, 0x00, 0x02, 0x76, 0x82, 0x00, 0x12, 0x2a, 0x82, 0x00, 0xc8, 0x6a, - 0x82, 0x10, 0x02, 0xe6, 0x80, 0x00, 0x12, 0x28, 0x80, 0x00, 0xc8, 0x68, - 0x00, 0x00, 0x20, 0x00, 0x82, 0x11, 0x29, 0x8a, 0x82, 0x00, 0x02, 0x76, - 0x00, 0x00, 0x12, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x02, 0x00, 0x02, 0x66, - 0x00, 0x00, 0x60, 0x00, 0x02, 0x11, 0x08, 0xca, 0x02, 0x00, 0x02, 0x76, - 0x02, 0x00, 0x12, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x02, 0x90, 0x02, 0xe6, - 0x00, 0x00, 0x60, 0x00, 0x02, 0x97, 0x6f, 0x5a, 0x02, 0x90, 0x02, 0xf6, - 0x00, 0x00, 0x12, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x01, 0x80, 0x02, 0x64, - 0x00, 0x00, 0x60, 0x00, 0x02, 0x0e, 0xff, 0x5a, 0x02, 0x00, 0x02, 0x76, - 0x02, 0x00, 0x12, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x00, 0x10, 0x02, 0xe4, - 0x00, 0x00, 0x60, 0x00, 0x02, 0x83, 0xbf, 0x5a, 0x02, 0x90, 0x02, 0xf6, - 0x00, 0x00, 0x12, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x01, 0x80, 0x02, 0x64, - 0x00, 0x00, 0x60, 0x00, 0x02, 0x0f, 0xdf, 0x5a, 0x02, 0x00, 0x02, 0x76, - 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x02, 0x00, 0x02, 0x66, - 0x00, 0x00, 0x60, 0x00, 0x02, 0x12, 0xf7, 0xca, 0x02, 0x00, 0x02, 0x76, - 0x02, 0x00, 0x04, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x02, 0x90, 0x02, 0xe6, - 0x00, 0x00, 0x60, 0x00, 0x02, 0x96, 0xd6, 0xca, 0x02, 0x90, 0x02, 0xf6, - 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x02, 0x00, 0x02, 0x66, - 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x20, 0x00, - 0x02, 0x10, 0x85, 0xca, 0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x04, 0x28, - 0x00, 0x00, 0xc8, 0x68, 0x02, 0x80, 0x02, 0x66, 0x02, 0x00, 0x04, 0x2a, - 0x02, 0x00, 0xc8, 0x6a, 0x00, 0x00, 0x20, 0x00, 0x02, 0x96, 0x95, 0xca, - 0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc8, 0x68, - 0x01, 0x80, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, 0x02, 0x0f, 0xdf, 0x5a, - 0x02, 0x00, 0x02, 0x76, 0x02, 0x00, 0x04, 0x2a, 0x02, 0x00, 0xc8, 0x6a, - 0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, 0x02, 0x96, 0x10, 0xca, - 0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc8, 0x68, - 0x02, 0x00, 0x02, 0x66, 0x00, 0x00, 0x60, 0x00, 0x02, 0x11, 0xef, 0xca, - 0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc8, 0x68, - 0x02, 0x80, 0x02, 0x66, 0x02, 0x00, 0x04, 0x2a, 0x02, 0x00, 0xc8, 0x6a, - 0x00, 0x00, 0x20, 0x00, 0x02, 0x95, 0xae, 0xca, 0x02, 0x90, 0x02, 0xf6, - 0x02, 0x00, 0x06, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x02, 0x10, 0x02, 0xe6, - 0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x20, 0x00, - 0x02, 0x10, 0x21, 0x0a, 0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x06, 0x28, - 0x00, 0x00, 0xc8, 0x68, 0x01, 0x80, 0x02, 0x64, 0x00, 0x00, 0x06, 0x28, - 0x00, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x20, 0x00, 0x01, 0x8d, 0xae, 0xc8, - 0x01, 0x8d, 0x0c, 0x88, 0x01, 0x80, 0x02, 0x74, 0x00, 0x00, 0x06, 0x28, - 0x00, 0x00, 0xc8, 0x68, 0x02, 0x00, 0x02, 0x66, 0x00, 0x00, 0x06, 0x28, - 0x00, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x20, 0x00, 0x02, 0x10, 0xa7, 0xca, - 0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc8, 0x68, - 0x00, 0x00, 0x02, 0x64, 0x02, 0x00, 0x06, 0x2a, 0x02, 0x00, 0xc8, 0x6a, - 0x00, 0x00, 0x20, 0x00, 0x00, 0x02, 0x31, 0xc8, 0x00, 0x02, 0x10, 0x88, - 0x00, 0x10, 0x02, 0xf4, 0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc8, 0x68, - 0x02, 0x80, 0x02, 0x66, 0x02, 0x00, 0x06, 0x2a, 0x02, 0x00, 0xc8, 0x6a, - 0x00, 0x00, 0x20, 0x00, 0x02, 0x96, 0x74, 0xca, 0x02, 0x90, 0x02, 0xf6, - 0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x02, 0x80, 0x02, 0x66, - 0x02, 0x00, 0x06, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x00, 0x00, 0x20, 0x00, - 0x02, 0x96, 0x52, 0x8a, 0x02, 0x90, 0x02, 0xf6, 0x02, 0x00, 0x08, 0x2a, - 0x02, 0x00, 0xc8, 0x6a, 0x02, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x08, 0x28, - 0x00, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x20, 0x00, 0x02, 0x10, 0x21, 0x0a, - 0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x08, 0x28, 0x00, 0x00, 0xc8, 0x68, - 0x00, 0x00, 0x02, 0x64, 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc8, 0x6a, - 0x00, 0x00, 0x20, 0x00, 0x00, 0x01, 0xae, 0xc8, 0x00, 0x01, 0x0c, 0x88, - 0x00, 0x10, 0x02, 0xf4, 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc8, 0x6a, - 0x02, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x08, 0x28, 0x00, 0x00, 0xc8, 0x68, - 0x00, 0x00, 0x20, 0x00, 0x02, 0x10, 0xa7, 0xca, 0x02, 0x00, 0x02, 0x76, - 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x02, 0x90, 0x02, 0xe6, - 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x00, 0x00, 0x20, 0x00, - 0x02, 0x96, 0x31, 0xca, 0x02, 0x96, 0x10, 0x8a, 0x02, 0x90, 0x02, 0xf6, - 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x02, 0x10, 0x02, 0xe6, - 0x00, 0x00, 0x08, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x20, 0x00, - 0x02, 0x12, 0x74, 0xca, 0x02, 0x00, 0x02, 0x76, 0x02, 0x00, 0x08, 0x2a, - 0x02, 0x00, 0xc8, 0x6a, 0x02, 0x90, 0x02, 0xe6, 0x02, 0x00, 0x08, 0x2a, - 0x02, 0x00, 0xc8, 0x6a, 0x00, 0x00, 0x20, 0x00, 0x02, 0x96, 0x52, 0x8a, - 0x02, 0x90, 0x02, 0xf6, 0x90, 0x00, 0x1b, 0x10, 0x90, 0x19, 0x2e, 0x28, - 0x90, 0x00, 0x00, 0x68, 0x90, 0x00, 0x02, 0x64, 0x00, 0x00, 0x20, 0x00, - 0x00, 0x00, 0x0a, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x01, 0x80, 0x02, 0x64, - 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x0a, 0x28, 0x01, 0x8f, 0xbd, 0x88, - 0x00, 0x00, 0xc8, 0x68, 0x01, 0x80, 0x02, 0x74, 0x00, 0x00, 0x0a, 0x28, - 0x00, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x02, 0x64, 0x02, 0x00, 0x0a, 0x2a, - 0x02, 0x00, 0xc8, 0x6a, 0x00, 0x00, 0x20, 0x00, 0x00, 0x03, 0x9c, 0x88, - 0x00, 0x10, 0x02, 0xf4, 0x02, 0x00, 0x0a, 0x2a, 0x02, 0x00, 0xc8, 0x6a, - 0x00, 0x10, 0x02, 0xe4, 0x02, 0x00, 0x0a, 0x2a, 0x02, 0x00, 0xc8, 0x6a, - 0x00, 0x00, 0x20, 0x00, 0x00, 0x03, 0x1b, 0xc8, 0x00, 0x02, 0x17, 0x88, - 0x00, 0x10, 0x02, 0xf4, 0x00, 0x19, 0x2e, 0x28, 0x00, 0x00, 0x00, 0x68, - 0x00, 0x00, 0x02, 0x64, 0x02, 0x00, 0x0a, 0x2a, 0x02, 0x00, 0xc8, 0x6a, - 0x02, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x00, 0x00, 0x01, 0x82, 0x42, 0x64, - 0x00, 0x00, 0x0a, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x00, 0x00, - 0x02, 0x10, 0x07, 0xca, 0x02, 0x0c, 0x9f, 0xfa, 0x02, 0x00, 0x02, 0x76, - 0x00, 0x19, 0x2e, 0x28, 0x00, 0x00, 0x00, 0x68, 0x00, 0x00, 0x02, 0x64, - 0x00, 0x00, 0x60, 0x00, 0x03, 0x00, 0x80, 0x58, 0x03, 0x00, 0x10, 0x2a, - 0x02, 0x04, 0x03, 0xe2, 0x02, 0x18, 0x56, 0x15, 0x02, 0x93, 0xcf, 0x5a, - 0x00, 0x94, 0x03, 0xa2, 0x02, 0x18, 0x56, 0x14, 0x00, 0x00, 0x20, 0x01, - 0x00, 0x00, 0x00, 0x00, 0x02, 0x98, 0x56, 0x15, 0x00, 0x90, 0x4a, 0x58, - 0x81, 0x98, 0xa0, 0x14, 0x04, 0x04, 0x00, 0x59, 0x00, 0x00, 0x06, 0x12, - 0x00, 0x90, 0x4a, 0x59, 0x02, 0x98, 0x56, 0x15, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x1b, 0x40, 0x5b, 0x03, 0x80, 0x00, 0xf9, 0x02, 0x00, 0x00, 0xa9, - 0x81, 0x98, 0xa0, 0x14, 0x01, 0x20, 0x00, 0x59, 0x04, 0x04, 0x01, 0xa1, - 0x20, 0x00, 0x02, 0x13, 0x00, 0x00, 0x00, 0x00, 0xa0, 0x10, 0x6c, 0xe1, - 0x00, 0x94, 0x4a, 0x59, 0x02, 0x98, 0x56, 0x14, 0xa3, 0x9c, 0x0f, 0xf9, - 0x20, 0x03, 0xe0, 0x5b, 0x81, 0x98, 0xa0, 0x14, 0x04, 0x04, 0x00, 0x59, - 0x01, 0x20, 0x01, 0xa0, 0x00, 0x94, 0x4a, 0x59, 0xa0, 0x10, 0x6c, 0xe0, - 0xa3, 0x9c, 0x0f, 0xf9, 0x81, 0x98, 0x60, 0x14, 0x04, 0x04, 0x00, 0x59, - 0x01, 0x20, 0x01, 0xa0, 0x00, 0x94, 0x4a, 0x59, 0xa0, 0x10, 0x6c, 0xe0, - 0xa3, 0x9c, 0x0f, 0xf9, 0x81, 0x98, 0x20, 0x14, 0x02, 0x84, 0x00, 0x59, - 0x01, 0x20, 0x01, 0xa0, 0xa0, 0x10, 0x6c, 0xe0, 0x01, 0x14, 0x01, 0xa1, - 0xa3, 0x9c, 0x0f, 0xf8, 0x00, 0x90, 0x03, 0xa2, 0xa0, 0x10, 0x6c, 0xe0, - 0xa3, 0x9c, 0x0f, 0xf8, 0x02, 0x00, 0x0c, 0x2b, 0x00, 0x00, 0x00, 0xa8, - 0x02, 0x00, 0xc8, 0x6b, 0x00, 0x00, 0x01, 0xe8, 0x00, 0x10, 0x02, 0xf4, - 0x02, 0x00, 0x0e, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x03, 0x90, 0x02, 0xf4, - 0x00, 0x00, 0x10, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x03, 0x80, 0x02, 0x74, - 0x00, 0x0c, 0x03, 0x62, 0x00, 0x00, 0x80, 0x00, 0x00, 0x19, 0x2e, 0x28, - 0x00, 0x00, 0x00, 0x68, 0x00, 0x00, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, - 0x00, 0x00, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, 0x00, 0x80, 0x2f, 0x58, - 0x02, 0x00, 0x12, 0x2a, 0x02, 0x00, 0xc6, 0x6a, 0x02, 0x90, 0x02, 0xe6, - 0x00, 0x00, 0x60, 0x00, 0x02, 0x95, 0x8c, 0xca, 0x02, 0x90, 0x02, 0xf6, - 0x00, 0x00, 0x12, 0x28, 0x00, 0x00, 0xc6, 0x68, 0x02, 0x00, 0x02, 0x66, - 0x00, 0x00, 0x60, 0x00, 0x02, 0x11, 0xad, 0xca, 0x02, 0x00, 0x02, 0x76, - 0x92, 0x00, 0x12, 0x2a, 0x92, 0x00, 0xc6, 0x6a, 0x92, 0x90, 0x02, 0xe6, - 0x00, 0x00, 0x60, 0x00, 0x92, 0x95, 0x6b, 0xca, 0x92, 0x90, 0x02, 0xf6, - 0x80, 0x00, 0x12, 0x28, 0x80, 0x00, 0xc6, 0x68, 0x82, 0x00, 0x02, 0x66, - 0x80, 0x00, 0x12, 0x28, 0x80, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x20, 0x00, - 0x82, 0x11, 0x6b, 0x8a, 0x82, 0x00, 0x02, 0x76, 0x02, 0x00, 0x12, 0x2a, - 0x02, 0x00, 0xc6, 0x6a, 0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, - 0x02, 0x95, 0x4a, 0xca, 0x02, 0x90, 0x02, 0xf6, 0x90, 0x00, 0x12, 0x28, - 0x90, 0x00, 0xc6, 0x68, 0x92, 0x00, 0x02, 0x66, 0x00, 0x00, 0x60, 0x00, - 0x92, 0x11, 0x29, 0xca, 0x92, 0x00, 0x02, 0x76, 0x82, 0x00, 0x12, 0x2a, - 0x82, 0x00, 0xc6, 0x6a, 0x82, 0x10, 0x02, 0xe6, 0x80, 0x00, 0x12, 0x28, - 0x80, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x20, 0x00, 0x82, 0x11, 0x29, 0x8a, - 0x82, 0x00, 0x02, 0x76, 0x00, 0x00, 0x12, 0x28, 0x00, 0x00, 0xc6, 0x68, - 0x02, 0x00, 0x02, 0x66, 0x00, 0x00, 0x60, 0x00, 0x02, 0x11, 0x08, 0xca, - 0x02, 0x00, 0x02, 0x76, 0x02, 0x00, 0x12, 0x2a, 0x02, 0x00, 0xc6, 0x6a, - 0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, 0x02, 0x97, 0x6f, 0x5a, - 0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x12, 0x28, 0x00, 0x00, 0xc6, 0x68, - 0x01, 0x80, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, 0x02, 0x0e, 0xff, 0x5a, - 0x02, 0x00, 0x02, 0x76, 0x02, 0x00, 0x12, 0x2a, 0x02, 0x00, 0xc6, 0x6a, - 0x00, 0x10, 0x02, 0xe4, 0x00, 0x00, 0x60, 0x00, 0x02, 0x83, 0xbf, 0x5a, - 0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x12, 0x28, 0x00, 0x00, 0xc6, 0x68, - 0x01, 0x80, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, 0x02, 0x0f, 0xdf, 0x5a, - 0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc6, 0x68, - 0x02, 0x00, 0x02, 0x66, 0x00, 0x00, 0x60, 0x00, 0x02, 0x12, 0xf7, 0xca, - 0x02, 0x00, 0x02, 0x76, 0x02, 0x00, 0x04, 0x2a, 0x02, 0x00, 0xc6, 0x6a, - 0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, 0x02, 0x96, 0xd6, 0xca, - 0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc6, 0x68, - 0x02, 0x00, 0x02, 0x66, 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc6, 0x68, - 0x00, 0x00, 0x20, 0x00, 0x02, 0x10, 0x85, 0xca, 0x02, 0x00, 0x02, 0x76, - 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc6, 0x68, 0x02, 0x80, 0x02, 0x66, - 0x02, 0x00, 0x04, 0x2a, 0x02, 0x00, 0xc6, 0x6a, 0x00, 0x00, 0x20, 0x00, - 0x02, 0x96, 0x95, 0xca, 0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x04, 0x28, - 0x00, 0x00, 0xc6, 0x68, 0x01, 0x80, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, - 0x02, 0x0f, 0xdf, 0x5a, 0x02, 0x00, 0x02, 0x76, 0x02, 0x00, 0x04, 0x2a, - 0x02, 0x00, 0xc6, 0x6a, 0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, - 0x02, 0x96, 0x10, 0xca, 0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x04, 0x28, - 0x00, 0x00, 0xc6, 0x68, 0x02, 0x00, 0x02, 0x66, 0x00, 0x00, 0x60, 0x00, - 0x02, 0x11, 0xef, 0xca, 0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x04, 0x28, - 0x00, 0x00, 0xc6, 0x68, 0x02, 0x80, 0x02, 0x66, 0x02, 0x00, 0x04, 0x2a, - 0x02, 0x00, 0xc6, 0x6a, 0x00, 0x00, 0x20, 0x00, 0x02, 0x95, 0xae, 0xca, - 0x02, 0x90, 0x02, 0xf6, 0x02, 0x00, 0x06, 0x2a, 0x02, 0x00, 0xc6, 0x6a, - 0x02, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc6, 0x68, - 0x00, 0x00, 0x20, 0x00, 0x02, 0x10, 0x21, 0x0a, 0x02, 0x00, 0x02, 0x76, - 0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc6, 0x68, 0x01, 0x80, 0x02, 0x64, - 0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x20, 0x00, - 0x01, 0x8d, 0xae, 0xc8, 0x01, 0x8d, 0x0c, 0x88, 0x01, 0x80, 0x02, 0x74, - 0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc6, 0x68, 0x02, 0x00, 0x02, 0x66, - 0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x20, 0x00, - 0x02, 0x10, 0xa7, 0xca, 0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x06, 0x28, - 0x00, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x02, 0x64, 0x02, 0x00, 0x06, 0x2a, - 0x02, 0x00, 0xc6, 0x6a, 0x00, 0x00, 0x20, 0x00, 0x00, 0x02, 0x31, 0xc8, - 0x00, 0x02, 0x10, 0x88, 0x00, 0x10, 0x02, 0xf4, 0x00, 0x00, 0x06, 0x28, - 0x00, 0x00, 0xc6, 0x68, 0x02, 0x80, 0x02, 0x66, 0x02, 0x00, 0x06, 0x2a, - 0x02, 0x00, 0xc6, 0x6a, 0x00, 0x00, 0x20, 0x00, 0x02, 0x96, 0x74, 0xca, - 0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc6, 0x68, - 0x02, 0x80, 0x02, 0x66, 0x02, 0x00, 0x06, 0x2a, 0x02, 0x00, 0xc6, 0x6a, - 0x00, 0x00, 0x20, 0x00, 0x02, 0x96, 0x52, 0x8a, 0x02, 0x90, 0x02, 0xf6, - 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc6, 0x6a, 0x02, 0x10, 0x02, 0xe6, - 0x00, 0x00, 0x08, 0x28, 0x00, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x20, 0x00, - 0x02, 0x10, 0x21, 0x0a, 0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x08, 0x28, - 0x00, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x02, 0x64, 0x02, 0x00, 0x08, 0x2a, - 0x02, 0x00, 0xc6, 0x6a, 0x00, 0x00, 0x20, 0x00, 0x00, 0x01, 0xae, 0xc8, - 0x00, 0x01, 0x0c, 0x88, 0x00, 0x10, 0x02, 0xf4, 0x02, 0x00, 0x08, 0x2a, - 0x02, 0x00, 0xc6, 0x6a, 0x02, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x08, 0x28, - 0x00, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x20, 0x00, 0x02, 0x10, 0xa7, 0xca, - 0x02, 0x00, 0x02, 0x76, 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc6, 0x6a, - 0x02, 0x90, 0x02, 0xe6, 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc6, 0x6a, - 0x00, 0x00, 0x20, 0x00, 0x02, 0x96, 0x31, 0xca, 0x02, 0x96, 0x10, 0x8a, - 0x02, 0x90, 0x02, 0xf6, 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc6, 0x6a, - 0x02, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x08, 0x28, 0x00, 0x00, 0xc6, 0x68, - 0x00, 0x00, 0x20, 0x00, 0x02, 0x12, 0x74, 0xca, 0x02, 0x00, 0x02, 0x76, - 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc6, 0x6a, 0x02, 0x90, 0x02, 0xe6, - 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc6, 0x6a, 0x00, 0x00, 0x20, 0x00, - 0x02, 0x96, 0x52, 0x8a, 0x02, 0x90, 0x02, 0xf6, 0x90, 0x00, 0x19, 0x90, - 0x90, 0x19, 0x2e, 0x28, 0x90, 0x00, 0x00, 0x68, 0x90, 0x00, 0x02, 0x64, - 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x0a, 0x28, 0x00, 0x00, 0xc6, 0x68, - 0x01, 0x80, 0x02, 0x64, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x0a, 0x28, - 0x01, 0x8f, 0xbd, 0x88, 0x00, 0x00, 0xc6, 0x68, 0x01, 0x80, 0x02, 0x74, - 0x00, 0x00, 0x0a, 0x28, 0x00, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x02, 0x64, - 0x02, 0x00, 0x0a, 0x2a, 0x02, 0x00, 0xc6, 0x6a, 0x00, 0x00, 0x20, 0x00, - 0x00, 0x03, 0x9c, 0x88, 0x00, 0x10, 0x02, 0xf4, 0x02, 0x00, 0x0a, 0x2a, - 0x02, 0x00, 0xc6, 0x6a, 0x00, 0x10, 0x02, 0xe4, 0x02, 0x00, 0x0a, 0x2a, - 0x02, 0x00, 0xc6, 0x6a, 0x00, 0x00, 0x20, 0x00, 0x00, 0x03, 0x1b, 0xc8, - 0x00, 0x02, 0x17, 0x88, 0x00, 0x10, 0x02, 0xf4, 0x00, 0x19, 0x2e, 0x28, - 0x00, 0x00, 0x00, 0x68, 0x00, 0x00, 0x02, 0x64, 0x02, 0x00, 0x0a, 0x2a, - 0x02, 0x00, 0xc6, 0x6a, 0x02, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x00, 0x00, - 0x01, 0x82, 0x22, 0x64, 0x00, 0x00, 0x0a, 0x28, 0x00, 0x00, 0xc6, 0x68, - 0x00, 0x00, 0x00, 0x00, 0x02, 0x10, 0x07, 0xca, 0x02, 0x0c, 0x9f, 0xfa, - 0x02, 0x00, 0x02, 0x76, 0x00, 0x19, 0x2e, 0x28, 0x00, 0x00, 0x00, 0x68, - 0x00, 0x00, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, 0x03, 0x00, 0x80, 0x58, - 0x03, 0x00, 0x10, 0x2a, 0x02, 0x04, 0x03, 0xe3, 0x00, 0x00, 0x00, 0x00, - 0x02, 0x18, 0x56, 0x15, 0x02, 0x93, 0xcf, 0x5a, 0x00, 0x94, 0x03, 0xa2, - 0x02, 0x18, 0x56, 0x14, 0x00, 0x00, 0x20, 0x00, 0x02, 0x98, 0x56, 0x15, - 0x00, 0x90, 0x2a, 0x58, 0x81, 0x98, 0xa0, 0x14, 0x04, 0x04, 0x00, 0x59, - 0x00, 0x00, 0x04, 0x12, 0x00, 0x90, 0x2a, 0x59, 0x02, 0x98, 0x56, 0x14, - 0x00, 0x1b, 0x40, 0x5b, 0x03, 0x80, 0x00, 0xf9, 0x02, 0x00, 0x00, 0xa9, - 0x81, 0x98, 0xa0, 0x14, 0x01, 0x20, 0x00, 0x59, 0x04, 0x04, 0x01, 0xa1, - 0x20, 0x00, 0x00, 0x12, 0xa0, 0x10, 0x6c, 0xe1, 0x00, 0x94, 0x2a, 0x59, - 0x02, 0x98, 0x56, 0x15, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, - 0xa3, 0x9c, 0x0f, 0xf9, 0x20, 0x03, 0xe0, 0x5b, 0x81, 0x98, 0xa0, 0x14, - 0x04, 0x04, 0x00, 0x59, 0x01, 0x20, 0x01, 0xa0, 0x00, 0x94, 0x2a, 0x59, - 0xa0, 0x10, 0x6c, 0xe1, 0x00, 0x00, 0x00, 0x00, 0xa3, 0x9c, 0x0f, 0xf9, - 0x81, 0x98, 0x60, 0x14, 0x04, 0x04, 0x00, 0x59, 0x01, 0x20, 0x01, 0xa0, - 0x00, 0x94, 0x2a, 0x59, 0xa0, 0x10, 0x6c, 0xe0, 0xa3, 0x9c, 0x0f, 0xf9, - 0x81, 0x98, 0x20, 0x14, 0x02, 0x84, 0x00, 0x59, 0x01, 0x20, 0x01, 0xa0, - 0xa0, 0x10, 0x6c, 0xe0, 0x01, 0x14, 0x01, 0xa1, 0xa3, 0x9c, 0x0f, 0xf8, - 0x00, 0x90, 0x03, 0xa2, 0xa0, 0x10, 0x6c, 0xe0, 0xa3, 0x9c, 0x0f, 0xf8, - 0x02, 0x00, 0x0c, 0x2b, 0x00, 0x00, 0x00, 0xa8, 0x02, 0x00, 0xc6, 0x6b, - 0x00, 0x00, 0x01, 0xe8, 0x00, 0x10, 0x02, 0xf4, 0x02, 0x00, 0x0e, 0x2a, - 0x02, 0x00, 0xc6, 0x6a, 0x03, 0x90, 0x02, 0xf4, 0x00, 0x00, 0x10, 0x28, - 0x00, 0x00, 0xc6, 0x68, 0x03, 0x80, 0x02, 0x74, 0x00, 0x0c, 0x03, 0x62, - 0x00, 0x00, 0x80, 0x00, 0x00, 0x0c, 0x03, 0x62, 0x00, 0x00, 0x80, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc0, 0x69, - 0x02, 0x00, 0x10, 0x2a, 0x02, 0x00, 0x02, 0x76, 0x00, 0x0c, 0x03, 0x62, - 0x00, 0x00, 0x80, 0x00, 0x01, 0xbc, 0x54, 0xf6, 0x02, 0x04, 0x03, 0xe2, - 0x02, 0x13, 0xcf, 0x5a, 0x00, 0x90, 0x03, 0xa2, 0x02, 0x18, 0x50, 0x2a, - 0x02, 0x00, 0x00, 0x6a, 0x00, 0x10, 0x03, 0x62, 0x01, 0x97, 0x30, 0x2a, - 0x01, 0x80, 0x00, 0x6a, 0x00, 0x00, 0x40, 0x00, 0x00, 0x17, 0xb4, 0x28, - 0x00, 0x00, 0x00, 0x68, 0x00, 0x00, 0x13, 0x62, 0x01, 0x97, 0x3c, 0x2a, - 0x01, 0x80, 0x00, 0x6a, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x04, 0x29, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x69, 0x02, 0x00, 0x10, 0x2a, - 0x02, 0x00, 0x02, 0x76, 0x00, 0x14, 0x4e, 0x28, 0x00, 0x00, 0x00, 0x68, - 0x00, 0x00, 0x13, 0x62, 0x01, 0x97, 0x52, 0x2a, 0x01, 0x80, 0x00, 0x6a, - 0x00, 0x00, 0x40, 0x00, 0x00, 0x11, 0x94, 0x28, 0x00, 0x00, 0x00, 0x68, - 0x00, 0x00, 0x13, 0x62, 0x01, 0x97, 0x5e, 0x2a, 0x01, 0x80, 0x00, 0x6a, - 0x00, 0x00, 0x40, 0x00, 0x02, 0x11, 0x4c, 0x2a, 0x02, 0x00, 0x00, 0x6a, - 0x00, 0x10, 0x03, 0x62, 0x01, 0x97, 0x6c, 0x2a, 0x01, 0x80, 0x00, 0x6a, - 0x02, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x20, 0x00, 0x00, 0x11, 0x4c, 0x28, - 0x00, 0x00, 0x00, 0x68, 0x00, 0x00, 0x13, 0x62, 0x01, 0x97, 0x7a, 0x2a, - 0x01, 0x80, 0x00, 0x6a, 0x02, 0x00, 0x00, 0xa8, 0x00, 0x00, 0x20, 0x00, - 0x02, 0x04, 0x03, 0xe2, 0x00, 0x12, 0x00, 0x28, 0x02, 0x00, 0x9f, 0xfa, - 0x00, 0x90, 0x03, 0xa2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, - 0x01, 0xbc, 0x52, 0xe6, 0x00, 0x00, 0x60, 0x00, 0x00, 0x0c, 0x03, 0x62, - 0x00, 0x00, 0x80, 0x00, 0x07, 0xae, 0xfe, 0x2a, 0x07, 0x80, 0x00, 0x6a, - 0x00, 0x10, 0x00, 0x28, 0x02, 0x80, 0x13, 0xa2, 0x0f, 0xff, 0xe3, 0x12, - 0x00, 0x00, 0x80, 0x00, 0x00, 0x0c, 0x03, 0x62, 0x00, 0x00, 0x80, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x0c, 0x03, 0x62, 0x00, 0x00, 0x80, 0x00, 0x00, 0x19, 0x30, 0x28, - 0x00, 0x00, 0x00, 0x68, 0x00, 0x00, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, - 0x00, 0x80, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, 0x90, 0x00, 0x20, 0x90, - 0x01, 0x04, 0x2a, 0x58, 0x00, 0x00, 0x60, 0x00, 0xa0, 0x00, 0x0a, 0x10, - 0x00, 0x00, 0x80, 0x00, 0x02, 0x00, 0x00, 0xfa, 0x02, 0x00, 0xc0, 0x6a, - 0x02, 0x90, 0x02, 0xe6, 0x03, 0x00, 0x08, 0x2a, 0x00, 0x00, 0x40, 0x00, - 0x02, 0x94, 0xcd, 0xfa, 0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x00, 0xf8, - 0x00, 0x00, 0xc0, 0x68, 0x01, 0x80, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, - 0x01, 0x8d, 0x0d, 0xd8, 0x01, 0x80, 0x02, 0x74, 0x0f, 0xff, 0xfa, 0x90, - 0x00, 0x00, 0x80, 0x00, 0x02, 0x60, 0x80, 0x2a, 0x02, 0x00, 0xdb, 0xeb, - 0x01, 0x80, 0x00, 0xf8, 0x01, 0x90, 0x02, 0xf4, 0x02, 0x60, 0x80, 0x2a, - 0x02, 0x00, 0xdb, 0xeb, 0x02, 0x00, 0x04, 0x28, 0x02, 0x10, 0x02, 0xf4, - 0x02, 0x00, 0x22, 0x66, 0x02, 0x60, 0x88, 0x28, 0x02, 0x00, 0xdb, 0xe8, - 0x00, 0x00, 0x20, 0x00, 0x02, 0x10, 0x02, 0x76, 0x02, 0x80, 0x42, 0x66, - 0x02, 0x60, 0x8a, 0x2a, 0x02, 0x00, 0xdb, 0xea, 0x00, 0x00, 0x20, 0x00, - 0x02, 0x90, 0x02, 0xf6, 0x02, 0x00, 0xc2, 0x66, 0x02, 0x60, 0x92, 0x28, - 0x02, 0x00, 0xdb, 0xe8, 0x00, 0x00, 0x20, 0x00, 0x02, 0x10, 0x02, 0x76, - 0x02, 0x80, 0x62, 0x66, 0x02, 0x60, 0x8c, 0x2a, 0x02, 0x00, 0xdb, 0xea, - 0x00, 0x00, 0x20, 0x00, 0x02, 0x90, 0x02, 0xf6, 0x02, 0x00, 0x82, 0x66, - 0x02, 0x60, 0x8e, 0x28, 0x02, 0x00, 0xdb, 0xe8, 0x00, 0x00, 0x20, 0x00, - 0x02, 0x10, 0x02, 0x76, 0x00, 0x00, 0xa2, 0x64, 0x02, 0x60, 0x90, 0x2a, - 0x02, 0x00, 0xdb, 0xea, 0x00, 0x00, 0x20, 0x00, 0x00, 0x10, 0x02, 0xf4, - 0x02, 0x60, 0x80, 0x2a, 0x02, 0x00, 0xdb, 0xea, 0x01, 0x90, 0x02, 0xf4, - 0x02, 0x60, 0x80, 0x2a, 0x02, 0x00, 0xdb, 0xeb, 0x00, 0x00, 0x00, 0xa8, - 0x00, 0x10, 0x02, 0xf4, 0x00, 0x0c, 0x03, 0x62, 0x00, 0x00, 0x80, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x19, 0x2a, 0x2a, - 0x02, 0x84, 0x20, 0xfb, 0x02, 0x00, 0x00, 0x6a, 0x02, 0x90, 0x02, 0xf6, - 0x02, 0x98, 0xe0, 0x2a, 0x02, 0x19, 0x2c, 0x2a, 0x02, 0x00, 0x00, 0x6b, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4a, 0x29, 0x02, 0x80, 0x00, 0x6a, - 0x03, 0x94, 0x10, 0x59, 0x00, 0x10, 0x02, 0xf4, 0x00, 0x00, 0x12, 0xaa, - 0x00, 0x80, 0x00, 0xa8, 0x04, 0x08, 0x00, 0x28, 0x04, 0x00, 0x00, 0x68, - 0x20, 0x03, 0xe0, 0x5b, 0x90, 0x14, 0x02, 0x64, 0x20, 0x00, 0x00, 0x12, - 0x93, 0x1c, 0x36, 0x74, 0x00, 0x00, 0x00, 0x00, 0x03, 0x20, 0x02, 0x65, - 0x02, 0x19, 0x2a, 0x29, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x79, - 0x01, 0xa0, 0x36, 0x65, 0x02, 0x00, 0x00, 0x68, 0x80, 0x87, 0xe0, 0x59, - 0x90, 0x14, 0x02, 0x75, 0x02, 0x90, 0x01, 0xa0, 0x00, 0x14, 0x02, 0x64, - 0x00, 0x00, 0x40, 0x00, 0x03, 0x1c, 0x36, 0x74, 0x00, 0x00, 0x60, 0x78, - 0x00, 0x14, 0x02, 0x74, 0x00, 0x19, 0x2a, 0x28, 0x00, 0x00, 0x00, 0x68, - 0x00, 0x18, 0xe0, 0x29, 0x00, 0x00, 0x02, 0x66, 0x00, 0x00, 0x00, 0x68, - 0x00, 0x00, 0x40, 0x00, 0x31, 0x80, 0x80, 0x59, 0x32, 0x19, 0x2e, 0x2a, - 0x32, 0x00, 0x00, 0x6a, 0x31, 0x90, 0x02, 0xf4, 0x30, 0x02, 0x9d, 0x41, - 0x32, 0x19, 0x30, 0x2a, 0x32, 0x00, 0x00, 0x6a, 0x30, 0x10, 0x02, 0xf4, - 0x30, 0x00, 0x09, 0x12, 0x00, 0x00, 0x80, 0x00, 0x02, 0x80, 0x00, 0xfa, - 0x02, 0x80, 0xc0, 0x6a, 0x03, 0x14, 0x02, 0xe6, 0x02, 0x00, 0x08, 0x2a, - 0x00, 0x00, 0x40, 0x00, 0x02, 0x18, 0x8d, 0xfa, 0x02, 0x14, 0x02, 0xf6, - 0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0xc0, 0x68, 0x01, 0x80, 0x02, 0x64, - 0x00, 0x00, 0x60, 0x00, 0x01, 0x8d, 0x0d, 0xd8, 0x01, 0x80, 0x02, 0x74, - 0x0f, 0xff, 0xf9, 0x90, 0x00, 0x00, 0x80, 0x00, 0x00, 0x0c, 0x03, 0x62, - 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 -}; - -static int load_bootstrap(void) -{ - const u8 *s = bootstrap_rbin; - u32 l = sizeof(bootstrap_rbin); - const u8 *data, *hdr, *h; - u32 chksum, chksum2; - int i, j, rangenr; - u32 start, length; - - if (l < 12) { - printf("bootstrap image corrupted. (too short header)\n"); - return -1; - } - - chksum = ((u32)s[4] << 24) | ((u32)s[5] << 16) | ((u32)s[ 6] << 8) | (u32)s[ 7]; - rangenr = ((u32)s[8] << 24) | ((u32)s[9] << 16) | ((u32)s[10] << 8) | (u32)s[11]; - s += 12; l -= 12; - - hdr = s; - s += 8 * rangenr; l -= 8 * rangenr; - data = s; - - /* validate bootstrap image */ - h = hdr; s = data; chksum2 = 0; - for (i = 0; i < rangenr; i++) { - start = ((u32)h[0] << 24) | ((u32)h[1] << 16) | ((u32)h[2] << 8) | (u32)h[3]; - length = ((u32)h[4] << 24) | ((u32)h[5] << 16) | ((u32)h[6] << 8) | (u32)h[7]; - h += 8; - - /* too short */ - if (l < length) { - printf("bootstrap image corrupted. (too short data)\n"); - return -1; - } - l -= length; - - j = (int)length / 4; - while (j-- > 0) { - chksum2 += ((u32)s[0] << 24) | ((u32)s[1] << 16) | ((u32)s[2] << 8) | (u32)s[3]; - s += 4; - } - } - - /* checksum must match */ - if (chksum != chksum2) { - printf("bootstrap image corrupted. (checksum error)\n"); - return -1; - } - - /* nothing must be left */ - if (l != 0) { - printf("bootstrap image corrupted. (garbage at the end)\n"); - return -1; - } - - /* write the image */ - h = hdr; - s = data; - for (i = 0; i < rangenr; i++) { - start = ((u32)h[0] << 24) | ((u32)h[1] << 16) | ((u32)h[2] << 8) | (u32)h[3]; - length = ((u32)h[4] << 24) | ((u32)h[5] << 16) | ((u32)h[6] << 8) | (u32)h[7]; - h += 8; - c62_write(start, (u32 *)s, length / 4); - s += length; - } - - /* and now validate checksum */ - h = hdr; - s = data; - chksum2 = 0; - for (i = 0; i < rangenr; i++) { - start = ((u32)h[0] << 24) | ((u32)h[1] << 16) | ((u32)h[2] << 8) | (u32)h[3]; - length = ((u32)h[4] << 24) | ((u32)h[5] << 16) | ((u32)h[6] << 8) | (u32)h[7]; - h += 8; - chksum2 += c62_checksum(start, length / 4); - s += length; - } - - /* checksum must match */ - if (chksum != chksum2) { - printf("bootstrap in DSP memory is corrupted\n"); - return -1; - } - - return 0; -} - -struct host_init { - u32 master_mode; - struct { - u8 port_id; - u8 slot_id; - } ch_serial_map[32]; - u32 clk_divider[2]; - /* pll */ - u32 initmode; - u32 pllm; - u32 div[4]; - u32 oscdiv1; - u32 unused[10]; -}; - -const struct host_init hi_default = { - .master_mode = -#if !defined(CONFIG_NETTA_ISDN) - -1, -#else - 0, -#endif - - .ch_serial_map = { - [ 0] = { .port_id = 2, .slot_id = 16 }, - [ 1] = { .port_id = 2, .slot_id = 17 }, - [ 2] = { .port_id = 2, .slot_id = 18 }, - [ 3] = { .port_id = 2, .slot_id = 19 }, - [ 4] = { .port_id = 2, .slot_id = 20 }, - [ 5] = { .port_id = 2, .slot_id = 21 }, - [ 6] = { .port_id = 2, .slot_id = 22 }, - [ 7] = { .port_id = 2, .slot_id = 23 }, - [ 8] = { .port_id = 2, .slot_id = 24 }, - [ 9] = { .port_id = 2, .slot_id = 25 }, - [10] = { .port_id = 2, .slot_id = 26 }, - [11] = { .port_id = 2, .slot_id = 27 }, - [12] = { .port_id = 2, .slot_id = 28 }, - [13] = { .port_id = 2, .slot_id = 29 }, - [14] = { .port_id = 2, .slot_id = 30 }, - [15] = { .port_id = 2, .slot_id = 31 }, - }, - - /* - dsp_clk(xin, pllm) = xin * pllm - serial_clk(xin, pllm, div) = (dsp_clk(xin, pllm) / 2) / (div + 1) - */ - - .clk_divider = { - [0] = 47, /* must be 2048Hz */ - [1] = 47, - }, - - .initmode = 1, - .pllm = -#if !defined(CONFIG_NETTA_ISDN) - 8, /* for =~ 25MHz 8 */ -#else - 4, -#endif - .div = { - [0] = 0x8000, - [1] = 0x8000, /* for =~ 25MHz 0x8000 */ - [2] = 0x8001, /* for =~ 25MHz 0x8001 */ - [3] = 0x8001, /* for =~ 25MHz 0x8001 */ - }, - - .oscdiv1 = 0, -}; - -static void hi_write(const struct host_init *hi) -{ - u32 hi_buf[1 + sizeof(*hi) / sizeof(u32)]; - u32 *s; - u32 chksum; - int i; - - memset(hi_buf, 0, sizeof(hi_buf)); - - s = hi_buf; - s++; - *s++ = hi->master_mode; - for (i = 0; i < (sizeof(hi->ch_serial_map) / sizeof(hi->ch_serial_map[0])) / 2; i++) - *s++ = ((u32)hi->ch_serial_map[i * 2 + 1].slot_id << 24) | ((u32)hi->ch_serial_map[i * 2 + 1].port_id << 16) | - ((u32)hi->ch_serial_map[i * 2 + 0].slot_id << 8) | (u32)hi->ch_serial_map[i * 2 + 0].port_id; - - for (i = 0; i < sizeof(hi->clk_divider)/sizeof(hi->clk_divider[0]); i++) - *s++ = hi->clk_divider[i]; - - *s++ = hi->initmode; - *s++ = hi->pllm; - for (i = 0; i < sizeof(hi->div)/sizeof(hi->div[0]); i++) - *s++ = hi->div[i]; - *s++ = hi->oscdiv1; - - chksum = 0; - for (i = 1; i < sizeof(hi_buf)/sizeof(hi_buf[0]); i++) - chksum += hi_buf[i]; - hi_buf[0] = -chksum; - - c62_write(0x1000, hi_buf, sizeof(hi_buf) / sizeof(hi_buf[0])); -} - -static void run_bootstrap(void) -{ - dsp_go_slow(); - - hi_write(&hi_default); - - /* signal interrupt */ - dsp_write_hpic(0x0002); - dsp_delay(); - - dsp_go_fast(); -} - -#endif - -/***********************************************************************************************************/ - -int board_post_dsp(int flags) -{ - u32 ramS, ramE; - u32 data, data2; - int i, j, k; -#if !defined(CONFIG_NETTA_6412) - int r; -#endif - dsp_reset(); - dsp_init_hpic(); -#if !defined(CONFIG_NETTA_6412) - dsp_go_slow(); -#endif - data = 0x11223344; - dsp_write_hpic_word(DSP_HPIA, data); - data2 = dsp_read_hpic_word(DSP_HPIA); - if (data2 != 0x11223344) { - printf("HPIA: ** ERROR; wrote 0x%08X read 0x%08X **\n", data, data2); - goto err; - } - - data = 0xFFEEDDCC; - dsp_write_hpic_word(DSP_HPIA, data); - data2 = dsp_read_hpic_word(DSP_HPIA); - if (data2 != 0xFFEEDDCC) { - printf("HPIA: ** ERROR; wrote 0x%08X read 0x%08X **\n", data, data2); - goto err; - } -#if defined(CONFIG_NETTA_6412) - dsp_dram_initialize(); -#else - r = load_bootstrap(); - if (r < 0) { - printf("BOOTSTRAP: ** ERROR ** failed to load\n"); - goto err; - } - - run_bootstrap(); - - dsp_go_fast(); -#endif - printf(" "); - - /* test RAMs */ - for (k = 0; k < sizeof(ranges)/sizeof(ranges[0]); k++) { - - ramS = ranges[k].start; - ramE = ranges[k].start + ranges[k].size; - - for (j = 0; j < 3; j++) { - - printf("\b\b\b\bR%d.%d", k, j); - - for (i = ramS; i < ramE; i += 4) { - - data = 0; - switch (j) { - case 0: data = 0xAA55AA55; break; - case 1: data = 0x55AA55AA; break; - case 2: data = (u32)i; break; - } - - c62_write_word(i, data); - data2 = c62_read_word(i); - if (data != data2) { - printf(" ** ERROR at 0x%08X; wrote 0x%08X read 0x%08X **\n", i, data, data2); - goto err; - } - } - } - } - - printf("\b\b\b\b \b\b\b\bOK\n"); -#if !defined(CONFIG_NETTA_6412) - /* XXX assume that this works */ - load_bootstrap(); - run_bootstrap(); - dsp_go_fast(); -#endif - return 0; - -err: - return -1; -} - -int board_dsp_reset(void) -{ -#if !defined(CONFIG_NETTA_6412) - int r; -#endif - dsp_reset(); - dsp_init_hpic(); -#if defined(CONFIG_NETTA_6412) - dsp_dram_initialize(); -#else - dsp_go_slow(); - r = load_bootstrap(); - if (r < 0) - return r; - - run_bootstrap(); - dsp_go_fast(); -#endif - return 0; -} diff --git a/board/netta/flash.c b/board/netta/flash.c deleted file mode 100644 index d6902a6..0000000 --- a/board/netta/flash.c +++ /dev/null @@ -1,492 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size(vu_long * addr, flash_info_t * info); -static int write_byte(flash_info_t * info, ulong dest, uchar data); -static void flash_get_offsets(ulong base, flash_info_t * info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init(void) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - unsigned long size; - int i; - - /* Init: no FLASHes known */ - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) - flash_info[i].flash_id = FLASH_UNKNOWN; - - size = flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", size, size << 20); - } - - /* Remap FLASH according to real size */ - memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000); - memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | (memctl->memc_br0 & ~(BR_BA_MSK)); - - /* Re-do sizing to get full correct info */ - size = flash_get_size((vu_long *) CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_get_offsets(CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0]); - - flash_protect ( FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[0]); - -#ifdef CONFIG_ENV_ADDR_REDUND - flash_protect ( FLAG_PROTECT_SET, - CONFIG_ENV_ADDR_REDUND, - CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[0]); -#endif - - - flash_info[0].size = size; - - return (size); -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets(ulong base, flash_info_t * info) -{ - int i; - - /* set up sector start address table */ - if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) { - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00010000); - } - } else if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00010000) - 0x00030000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00010000; - } - } - -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info(flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - printf("AMD "); - break; - case FLASH_MAN_FUJ: - printf("FUJITSU "); - break; - case FLASH_MAN_MX: - printf("MXIC "); - break; - default: - printf("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM040: - printf("AM29LV040B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400B: - printf("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: - printf("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: - printf("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: - printf("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: - printf("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: - printf("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: - printf("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: - printf("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - default: - printf("Unknown Chip Type\n"); - break; - } - - printf(" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count); - - printf(" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf("\n "); - printf(" %08lX%s", info->start[i], info->protect[i] ? " (RO)" : " "); - } - printf("\n"); -} - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -static ulong flash_get_size(vu_long * addr, flash_info_t * info) -{ - short i; - uchar mid; - uchar pid; - vu_char *caddr = (vu_char *) addr; - ulong base = (ulong) addr; - - - /* Write auto select command: read Manufacturer ID */ - caddr[0x0555] = 0xAA; - caddr[0x02AA] = 0x55; - caddr[0x0555] = 0x90; - - mid = caddr[0]; - switch (mid) { - case (AMD_MANUFACT & 0xFF): - info->flash_id = FLASH_MAN_AMD; - break; - case (FUJ_MANUFACT & 0xFF): - info->flash_id = FLASH_MAN_FUJ; - break; - case (MX_MANUFACT & 0xFF): - info->flash_id = FLASH_MAN_MX; - break; - case (STM_MANUFACT & 0xFF): - info->flash_id = FLASH_MAN_STM; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - pid = caddr[1]; /* device ID */ - switch (pid) { - case (AMD_ID_LV400T & 0xFF): - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00080000; - break; /* => 512 kB */ - - case (AMD_ID_LV400B & 0xFF): - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00080000; - break; /* => 512 kB */ - - case (AMD_ID_LV800T & 0xFF): - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (AMD_ID_LV800B & 0xFF): - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (AMD_ID_LV160T & 0xFF): - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (AMD_ID_LV160B & 0xFF): - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (AMD_ID_LV040B & 0xFF): - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x00080000; - break; - - case (STM_ID_M29W040B & 0xFF): - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x00080000; - break; - -#if 0 /* enable when device IDs are available */ - case (AMD_ID_LV320T & 0xFF): - info->flash_id += FLASH_AM320T; - info->sector_count = 67; - info->size = 0x00400000; - break; /* => 4 MB */ - - case (AMD_ID_LV320B & 0xFF): - info->flash_id += FLASH_AM320B; - info->sector_count = 67; - info->size = 0x00400000; - break; /* => 4 MB */ -#endif - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - - printf(" "); - /* set up sector start address table */ - if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) { - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00010000); - } - } else if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00010000) - 0x00030000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00010000; - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection: D0 = 1 if protected */ - caddr = (volatile unsigned char *)(info->start[i]); - info->protect[i] = caddr[2] & 1; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - caddr = (vu_char *) info->start[0]; - - caddr[0x0555] = 0xAA; - caddr[0x02AA] = 0x55; - caddr[0x0555] = 0xF0; - - udelay(20000); - } - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase(flash_info_t * info, int s_first, int s_last) -{ - vu_char *addr = (vu_char *) (info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf("- missing\n"); - } else { - printf("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf("Can't erase unknown flash type %08lx - aborted\n", info->flash_id); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf("- Warning: %d protected sectors will not be erased!\n", prot); - } else { - printf("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0xAA; - addr[0x02AA] = 0x55; - addr[0x0555] = 0x80; - addr[0x0555] = 0xAA; - addr[0x02AA] = 0x55; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (vu_char *) (info->start[sect]); - addr[0] = 0x30; - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay(1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer(0); - last = start; - addr = (vu_char *) (info->start[l_sect]); - while ((addr[0] & 0x80) != 0x80) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc('.'); - last = now; - } - } - - DONE: - /* reset to read mode */ - addr = (vu_char *) info->start[0]; - addr[0] = 0xF0; /* reset bank */ - - printf(" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - int rc; - - while (cnt > 0) { - if ((rc = write_byte(info, addr++, *src++)) != 0) { - return (rc); - } - --cnt; - } - - return (0); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_byte(flash_info_t * info, ulong dest, uchar data) -{ - vu_char *addr = (vu_char *) (info->start[0]); - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_char *) dest) & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0xAA; - addr[0x02AA] = 0x55; - addr[0x0555] = 0xA0; - - *((vu_char *) dest) = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer(0); - while ((*((vu_char *) dest) & 0x80) != (data & 0x80)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} diff --git a/board/netta/netta.c b/board/netta/netta.c deleted file mode 100644 index 2c9c6bf..0000000 --- a/board/netta/netta.c +++ /dev/null @@ -1,558 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Pantelis Antoniou, Intracom S.A., panto@intracom.gr - * U-Boot port on NetTA4 board - */ - -#include -#include - -#include "mpc8xx.h" - -#ifdef CONFIG_HW_WATCHDOG -#include -#endif - -int fec8xx_miiphy_read(char *devname, unsigned char addr, - unsigned char reg, unsigned short *value); -int fec8xx_miiphy_write(char *devname, unsigned char addr, - unsigned char reg, unsigned short value); - -/****************************************************************/ - -/* some sane bit macros */ -#define _BD(_b) (1U << (31-(_b))) -#define _BDR(_l, _h) (((((1U << (31-(_l))) - 1) << 1) | 1) & ~((1U << (31-(_h))) - 1)) - -#define _BW(_b) (1U << (15-(_b))) -#define _BWR(_l, _h) (((((1U << (15-(_l))) - 1) << 1) | 1) & ~((1U << (15-(_h))) - 1)) - -#define _BB(_b) (1U << (7-(_b))) -#define _BBR(_l, _h) (((((1U << (7-(_l))) - 1) << 1) | 1) & ~((1U << (7-(_h))) - 1)) - -#define _B(_b) _BD(_b) -#define _BR(_l, _h) _BDR(_l, _h) - -/****************************************************************/ - -/* - * Check Board Identity: - * - * Return 1 always. - */ - -int checkboard(void) -{ - printf ("Intracom NETTA" -#if defined(CONFIG_NETTA_ISDN) - " with ISDN support" -#endif -#if defined(CONFIG_NETTA_6412) - " (DSP:TI6412)" -#else - " (DSP:TI6711)" -#endif - "\n" - ); - return (0); -} - -/****************************************************************/ - -#define _NOT_USED_ 0xFFFFFFFF - -/****************************************************************/ - -#define CS_0000 0x00000000 -#define CS_0001 0x10000000 -#define CS_0010 0x20000000 -#define CS_0011 0x30000000 -#define CS_0100 0x40000000 -#define CS_0101 0x50000000 -#define CS_0110 0x60000000 -#define CS_0111 0x70000000 -#define CS_1000 0x80000000 -#define CS_1001 0x90000000 -#define CS_1010 0xA0000000 -#define CS_1011 0xB0000000 -#define CS_1100 0xC0000000 -#define CS_1101 0xD0000000 -#define CS_1110 0xE0000000 -#define CS_1111 0xF0000000 - -#define BS_0000 0x00000000 -#define BS_0001 0x01000000 -#define BS_0010 0x02000000 -#define BS_0011 0x03000000 -#define BS_0100 0x04000000 -#define BS_0101 0x05000000 -#define BS_0110 0x06000000 -#define BS_0111 0x07000000 -#define BS_1000 0x08000000 -#define BS_1001 0x09000000 -#define BS_1010 0x0A000000 -#define BS_1011 0x0B000000 -#define BS_1100 0x0C000000 -#define BS_1101 0x0D000000 -#define BS_1110 0x0E000000 -#define BS_1111 0x0F000000 - -#define A10_AAAA 0x00000000 -#define A10_AAA0 0x00200000 -#define A10_AAA1 0x00300000 -#define A10_000A 0x00800000 -#define A10_0000 0x00A00000 -#define A10_0001 0x00B00000 -#define A10_111A 0x00C00000 -#define A10_1110 0x00E00000 -#define A10_1111 0x00F00000 - -#define RAS_0000 0x00000000 -#define RAS_0001 0x00040000 -#define RAS_1110 0x00080000 -#define RAS_1111 0x000C0000 - -#define CAS_0000 0x00000000 -#define CAS_0001 0x00010000 -#define CAS_1110 0x00020000 -#define CAS_1111 0x00030000 - -#define WE_0000 0x00000000 -#define WE_0001 0x00004000 -#define WE_1110 0x00008000 -#define WE_1111 0x0000C000 - -#define GPL4_0000 0x00000000 -#define GPL4_0001 0x00001000 -#define GPL4_1110 0x00002000 -#define GPL4_1111 0x00003000 - -#define GPL5_0000 0x00000000 -#define GPL5_0001 0x00000400 -#define GPL5_1110 0x00000800 -#define GPL5_1111 0x00000C00 -#define LOOP 0x00000080 - -#define EXEN 0x00000040 - -#define AMX_COL 0x00000000 -#define AMX_ROW 0x00000020 -#define AMX_MAR 0x00000030 - -#define NA 0x00000008 - -#define UTA 0x00000004 - -#define TODT 0x00000002 - -#define LAST 0x00000001 - -/* #define CAS_LATENCY 3 */ -#define CAS_LATENCY 2 - -const uint sdram_table[0x40] = { - -#if CAS_LATENCY == 3 - /* RSS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_0000 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */ - CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */ - _NOT_USED_, _NOT_USED_, - - /* RBS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_0001 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */ - CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL, /* PALL */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | TODT | LAST, /* NOP */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* WSS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_0000 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL | UTA, /* WRITE */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* WBS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL, /* WRITE */ - CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0001 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, -#endif - -#if CAS_LATENCY == 2 - /* RSS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_0001 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */ - CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL, /* NOP */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, - - /* RBS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */ - CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0001 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL, /* NOP */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* WSS */ - CS_0001 | BS_1111 | A10_AAA0 | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL, /* NOP */ - CS_0000 | BS_0001 | A10_0001 | RAS_1110 | CAS_0001 | WE_0000 | AMX_COL | UTA, /* WRITE */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, - _NOT_USED_, - - /* WBS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL, /* NOP */ - CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0001 | AMX_COL, /* WRITE */ - CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1110 | BS_0001 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL | UTA, /* NOP */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, - -#endif - - /* UPT */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_0001 | WE_1111 | AMX_COL | UTA | LOOP, /* ATRFR */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | LOOP, /* NOP */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, - - /* EXC */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | LAST, - _NOT_USED_, - - /* REG */ - CS_1110 | BS_1111 | A10_1110 | RAS_1110 | CAS_1110 | WE_1110 | AMX_MAR | UTA, - CS_0001 | BS_1111 | A10_0001 | RAS_0001 | CAS_0001 | WE_0001 | AMX_MAR | UTA | LAST, -}; - -/* 0xC8 = 0b11001000 , CAS3, >> 2 = 0b00 11 0 010 */ -/* 0x88 = 0b10001000 , CAS2, >> 2 = 0b00 10 0 010 */ -#define MAR_SDRAM_INIT ((CAS_LATENCY << 6) | 0x00000008LU) - -/* 8 */ -#define CONFIG_SYS_MAMR ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -void check_ram(unsigned int addr, unsigned int size) -{ - unsigned int i, j, v, vv; - volatile unsigned int *p; - unsigned int pv; - - p = (unsigned int *)addr; - pv = (unsigned int)p; - for (i = 0; i < size / sizeof(unsigned int); i++, pv += sizeof(unsigned int)) - *p++ = pv; - - p = (unsigned int *)addr; - for (i = 0; i < size / sizeof(unsigned int); i++) { - v = (unsigned int)p; - vv = *p; - if (vv != v) { - printf("%p: read %08x instead of %08x\n", p, vv, v); - hang(); - } - p++; - } - - for (j = 0; j < 5; j++) { - switch (j) { - case 0: v = 0x00000000; break; - case 1: v = 0xffffffff; break; - case 2: v = 0x55555555; break; - case 3: v = 0xaaaaaaaa; break; - default:v = 0xdeadbeef; break; - } - p = (unsigned int *)addr; - for (i = 0; i < size / sizeof(unsigned int); i++) { - *p = v; - vv = *p; - if (vv != v) { - printf("%p: read %08x instead of %08x\n", p, vv, v); - hang(); - } - *p = ~v; - p++; - } - } -} - -phys_size_t initdram(int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size; - - upmconfig(UPMB, (uint *) sdram_table, sizeof(sdram_table) / sizeof(uint)); - - /* - * Preliminary prescaler for refresh - */ - memctl->memc_mptpr = MPTPR_PTP_DIV8; - - memctl->memc_mar = MAR_SDRAM_INIT; /* 32-bit address to be output on the address bus if AMX = 0b11 */ - - /* - * Map controller bank 3 to the SDRAM bank at preliminary address. - */ - memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM; - memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM; - - memctl->memc_mbmr = CONFIG_SYS_MAMR & ~MAMR_PTAE; /* no refresh yet */ - - udelay(200); - - /* perform SDRAM initialisation sequence */ - memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x3C); /* precharge all */ - udelay(1); - - memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(2) | MCR_MAD(0x30); /* refresh 2 times(0) */ - udelay(1); - - memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x3E); /* exception program (write mar)*/ - udelay(1); - - memctl->memc_mbmr |= MAMR_PTAE; /* enable refresh */ - - udelay(10000); - - { - u32 d1, d2; - - d1 = 0xAA55AA55; - *(volatile u32 *)0 = d1; - d2 = *(volatile u32 *)0; - if (d1 != d2) { - printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2); - hang(); - } - - d1 = 0x55AA55AA; - *(volatile u32 *)0 = d1; - d2 = *(volatile u32 *)0; - if (d1 != d2) { - printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2); - hang(); - } - } - - size = get_ram_size((long *)0, SDRAM_MAX_SIZE); - -#if 0 - printf("check 0\n"); - check_ram(( 0 << 20), (2 << 20)); - printf("check 16\n"); - check_ram((16 << 20), (2 << 20)); - printf("check 32\n"); - check_ram((32 << 20), (2 << 20)); - printf("check 48\n"); - check_ram((48 << 20), (2 << 20)); -#endif - - if (size == 0) { - printf("SIZE is zero: LOOP on 0\n"); - for (;;) { - *(volatile u32 *)0 = 0; - (void)*(volatile u32 *)0; - } - } - - return size; -} - -/* ------------------------------------------------------------------------- */ - -int misc_init_r(void) -{ - return(0); -} - -void reset_phys(void) -{ - int phyno; - unsigned short v; - - /* reset the damn phys */ - mii_init(); - - for (phyno = 0; phyno < 32; ++phyno) { - fec8xx_miiphy_read(NULL, phyno, MII_PHYSID1, &v); - if (v == 0xFFFF) - continue; - fec8xx_miiphy_write(NULL, phyno, MII_BMCR, BMCR_PDOWN); - udelay(10000); - fec8xx_miiphy_write(NULL, phyno, MII_BMCR, - BMCR_RESET | BMCR_ANENABLE); - udelay(10000); - } -} - -extern int board_dsp_reset(void); - -int last_stage_init(void) -{ - int r; - - reset_phys(); - r = board_dsp_reset(); - if (r < 0) - printf("*** WARNING *** DSP reset failed (run diagnostics)\n"); - return 0; -} - -/* ------------------------------------------------------------------------- */ - -/* GP = general purpose, SP = special purpose (on chip peripheral) */ - -/* bits that can have a special purpose or can be configured as inputs/outputs */ -#define PA_GP_INMASK (_BWR(3) | _BWR(7, 9) | _BW(11)) -#define PA_GP_OUTMASK (_BW(6) | _BW(10) | _BWR(12, 15)) -#define PA_SP_MASK (_BWR(0, 2) | _BWR(4, 5)) -#define PA_ODR_VAL 0 -#define PA_GP_OUTVAL (_BW(13) | _BWR(14, 15)) -#define PA_SP_DIRVAL 0 - -#define PB_GP_INMASK (_B(28) | _B(31)) -#define PB_GP_OUTMASK (_BR(15, 19) | _BR(26, 27) | _BR(29, 30)) -#define PB_SP_MASK (_BR(22, 25)) -#define PB_ODR_VAL 0 -#define PB_GP_OUTVAL (_BR(15, 19) | _BR(26, 27) | _BR(29, 31)) -#define PB_SP_DIRVAL 0 - -#define PC_GP_INMASK (_BW(5) | _BW(7) | _BW(8) | _BWR(9, 11) | _BWR(13, 15)) -#define PC_GP_OUTMASK (_BW(6) | _BW(12)) -#define PC_SP_MASK (_BW(4) | _BW(8)) -#define PC_SOVAL 0 -#define PC_INTVAL _BW(7) -#define PC_GP_OUTVAL (_BW(6) | _BW(12)) -#define PC_SP_DIRVAL 0 - -#define PD_GP_INMASK 0 -#define PD_GP_OUTMASK _BWR(3, 15) -#define PD_SP_MASK 0 - -#if defined(CONFIG_NETTA_6412) - -#define PD_GP_OUTVAL (_BWR(5, 7) | _BW(9) | _BW(11) | _BW(15)) - -#else - -#define PD_GP_OUTVAL (_BWR(5, 7) | _BW(9) | _BW(11)) - -#endif - -#define PD_SP_DIRVAL 0 - -int board_early_init_f(void) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile iop8xx_t *ioport = &immap->im_ioport; - volatile cpm8xx_t *cpm = &immap->im_cpm; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - /* CS1: NAND chip select */ - memctl->memc_or1 = ((0xFFFFFFFFLU & ~(NAND_SIZE - 1)) | OR_BI | OR_SCY_2_CLK | OR_TRLX | OR_ACS_DIV2) ; - memctl->memc_br1 = ((NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_V); -#if !defined(CONFIG_NETTA_6412) - /* CS2: DSP */ - memctl->memc_or2 = ((0xFFFFFFFFLU & ~(DSP_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_7_CLK | OR_ACS_DIV2); - memctl->memc_br2 = ((DSP_BASE & BR_BA_MSK) | BR_PS_16 | BR_V); -#else - /* CS6: DSP */ - memctl->memc_or6 = ((0xFFFFFFFFLU & ~(DSP_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_7_CLK | OR_ACS_DIV2); - memctl->memc_br6 = ((DSP_BASE & BR_BA_MSK) | BR_PS_16 | BR_V); -#endif - /* CS4: External register chip select */ - memctl->memc_or4 = ((0xFFFFFFFFLU & ~(ER_SIZE - 1)) | OR_BI | OR_SCY_4_CLK); - memctl->memc_br4 = ((ER_BASE & BR_BA_MSK) | BR_PS_32 | BR_V); - - /* CS5: dummy for accurate delay */ - memctl->memc_or5 = ((0xFFFFFFFFLU & ~(DUMMY_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_0_CLK | OR_ACS_DIV2); - memctl->memc_br5 = ((DUMMY_BASE & BR_BA_MSK) | BR_PS_32 | BR_V); - - ioport->iop_padat = PA_GP_OUTVAL; - ioport->iop_paodr = PA_ODR_VAL; - ioport->iop_padir = PA_GP_OUTMASK | PA_SP_DIRVAL; - ioport->iop_papar = PA_SP_MASK; - - cpm->cp_pbdat = PB_GP_OUTVAL; - cpm->cp_pbodr = PB_ODR_VAL; - cpm->cp_pbdir = PB_GP_OUTMASK | PB_SP_DIRVAL; - cpm->cp_pbpar = PB_SP_MASK; - - ioport->iop_pcdat = PC_GP_OUTVAL; - ioport->iop_pcdir = PC_GP_OUTMASK | PC_SP_DIRVAL; - ioport->iop_pcso = PC_SOVAL; - ioport->iop_pcint = PC_INTVAL; - ioport->iop_pcpar = PC_SP_MASK; - - ioport->iop_pddat = PD_GP_OUTVAL; - ioport->iop_pddir = PD_GP_OUTMASK | PD_SP_DIRVAL; - ioport->iop_pdpar = PD_SP_MASK; - - /* ioport->iop_pddat |= (1 << (15 - 6)) | (1 << (15 - 7)); */ - - return 0; -} - -#if defined(CONFIG_CMD_PCMCIA) - -int pcmcia_init(void) -{ - return 0; -} - -#endif - -#ifdef CONFIG_HW_WATCHDOG - -void hw_watchdog_reset(void) -{ - /* XXX add here the really funky stuff */ -} - -#endif diff --git a/board/netta/pcmcia.c b/board/netta/pcmcia.c deleted file mode 100644 index 3fa1925..0000000 --- a/board/netta/pcmcia.c +++ /dev/null @@ -1,346 +0,0 @@ -#include -#include -#include - -#undef CONFIG_PCMCIA - -#if defined(CONFIG_CMD_PCMCIA) -#define CONFIG_PCMCIA -#endif - -#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD) -#define CONFIG_PCMCIA -#endif - -#ifdef CONFIG_PCMCIA - -/* some sane bit macros */ -#define _BD(_b) (1U << (31-(_b))) -#define _BDR(_l, _h) (((((1U << (31-(_l))) - 1) << 1) | 1) & ~((1U << (31-(_h))) - 1)) - -#define _BW(_b) (1U << (15-(_b))) -#define _BWR(_l, _h) (((((1U << (15-(_l))) - 1) << 1) | 1) & ~((1U << (15-(_h))) - 1)) - -#define _BB(_b) (1U << (7-(_b))) -#define _BBR(_l, _h) (((((1U << (7-(_l))) - 1) << 1) | 1) & ~((1U << (7-(_h))) - 1)) - -#define _B(_b) _BD(_b) -#define _BR(_l, _h) _BDR(_l, _h) - -#define PCMCIA_BOARD_MSG "NETTA" - -static const unsigned short vppd_masks[2] = { _BW(14), _BW(15) }; - -static void cfg_vppd(int no) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - unsigned short mask; - - if ((unsigned int)no >= sizeof(vppd_masks)/sizeof(vppd_masks[0])) - return; - - mask = vppd_masks[no]; - - immap->im_ioport.iop_papar &= ~mask; - immap->im_ioport.iop_paodr &= ~mask; - immap->im_ioport.iop_padir |= mask; -} - -static void set_vppd(int no, int what) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - unsigned short mask; - - if ((unsigned int)no >= sizeof(vppd_masks)/sizeof(vppd_masks[0])) - return; - - mask = vppd_masks[no]; - - if (what) - immap->im_ioport.iop_padat |= mask; - else - immap->im_ioport.iop_padat &= ~mask; -} - -static const unsigned short vccd_masks[2] = { _BW(10), _BW(6) }; - -static void cfg_vccd(int no) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - unsigned short mask; - - if ((unsigned int)no >= sizeof(vccd_masks)/sizeof(vccd_masks[0])) - return; - - mask = vccd_masks[no]; - - immap->im_ioport.iop_papar &= ~mask; - immap->im_ioport.iop_paodr &= ~mask; - immap->im_ioport.iop_padir |= mask; -} - -static void set_vccd(int no, int what) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - unsigned short mask; - - if ((unsigned int)no >= sizeof(vccd_masks)/sizeof(vccd_masks[0])) - return; - - mask = vccd_masks[no]; - - if (what) - immap->im_ioport.iop_padat |= mask; - else - immap->im_ioport.iop_padat &= ~mask; -} - -static const unsigned short oc_mask = _BW(8); - -static void cfg_oc(void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - unsigned short mask = oc_mask; - - immap->im_ioport.iop_pcdir &= ~mask; - immap->im_ioport.iop_pcso &= ~mask; - immap->im_ioport.iop_pcint &= ~mask; - immap->im_ioport.iop_pcpar &= ~mask; -} - -static int get_oc(void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - unsigned short mask = oc_mask; - int what; - - what = !!(immap->im_ioport.iop_pcdat & mask);; - return what; -} - -static const unsigned short shdn_mask = _BW(12); - -static void cfg_shdn(void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - unsigned short mask; - - mask = shdn_mask; - - immap->im_ioport.iop_papar &= ~mask; - immap->im_ioport.iop_paodr &= ~mask; - immap->im_ioport.iop_padir |= mask; -} - -static void set_shdn(int what) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - unsigned short mask; - - mask = shdn_mask; - - if (what) - immap->im_ioport.iop_padat |= mask; - else - immap->im_ioport.iop_padat &= ~mask; -} - -static void cfg_ports (void) -{ - cfg_vppd(0); cfg_vppd(1); /* VPPD0,VPPD1 VAVPP => Hi-Z */ - cfg_vccd(0); cfg_vccd(1); /* 3V and 5V off */ - cfg_shdn(); - cfg_oc(); - - /* - * Configure Port A for TPS2211 PC-Card Power-Interface Switch - * - * Switch off all voltages, assert shutdown - */ - set_vppd(0, 1); set_vppd(1, 1); - set_vccd(0, 0); set_vccd(1, 0); - set_shdn(1); - - udelay(100000); -} - -int pcmcia_hardware_enable(int slot) -{ - volatile pcmconf8xx_t *pcmp; - uint reg, pipr, mask; - int i; - - debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot); - - udelay(10000); - - pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia)); - - /* Configure Ports for TPS2211A PC-Card Power-Interface Switch */ - cfg_ports (); - - /* clear interrupt state, and disable interrupts */ - pcmp->pcmc_pscr = PCMCIA_MASK(_slot_); - pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_); - - /* - * Disable interrupts, DMA, and PCMCIA buffers - * (isolate the interface) and assert RESET signal - */ - debug ("Disable PCMCIA buffers and assert RESET\n"); - reg = 0; - reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */ - reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */ - PCMCIA_PGCRX(_slot_) = reg; - - udelay(500); - - /* - * Make sure there is a card in the slot, then configure the interface. - */ - udelay(10000); - debug ("[%d] %s: PIPR(%p)=0x%x\n", - __LINE__,__FUNCTION__, - &(pcmp->pcmc_pipr),pcmp->pcmc_pipr); - if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) { - printf (" No Card found\n"); - return (1); - } - - /* - * Power On: Set VAVCC to 3.3V or 5V, set VAVPP to Hi-Z - */ - mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot); - pipr = pcmp->pcmc_pipr; - debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n", - pipr, - (reg&PCMCIA_VS1(slot))?"n":"ff", - (reg&PCMCIA_VS2(slot))?"n":"ff"); - - if ((pipr & mask) == mask) { - set_vppd(0, 1); set_vppd(1, 1); /* VAVPP => Hi-Z */ - set_vccd(0, 0); set_vccd(1, 1); /* 5V on, 3V off */ - puts (" 5.0V card found: "); - } else { - set_vppd(0, 1); set_vppd(1, 1); /* VAVPP => Hi-Z */ - set_vccd(0, 1); set_vccd(1, 0); /* 5V off, 3V on */ - puts (" 3.3V card found: "); - } - - /* Wait 500 ms; use this to check for over-current */ - for (i=0; i<5000; ++i) { - if (!get_oc()) { - printf (" *** Overcurrent - Safety shutdown ***\n"); - set_vccd(0, 0); set_vccd(1, 0); /* VAVPP => Hi-Z */ - return (1); - } - udelay (100); - } - - debug ("Enable PCMCIA buffers and stop RESET\n"); - reg = PCMCIA_PGCRX(_slot_); - reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */ - reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */ - PCMCIA_PGCRX(_slot_) = reg; - - udelay(250000); /* some cards need >150 ms to come up :-( */ - - debug ("# hardware_enable done\n"); - - return (0); -} - - -#if defined(CONFIG_CMD_PCMCIA) -int pcmcia_hardware_disable(int slot) -{ - u_long reg; - - debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot); - - /* Configure PCMCIA General Control Register */ - debug ("Disable PCMCIA buffers and assert RESET\n"); - reg = 0; - reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */ - reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */ - PCMCIA_PGCRX(_slot_) = reg; - - /* All voltages off / Hi-Z */ - set_vppd(0, 1); set_vppd(1, 1); - set_vccd(0, 1); set_vccd(1, 1); - - udelay(10000); - - return (0); -} -#endif - - -int pcmcia_voltage_set(int slot, int vcc, int vpp) -{ - volatile pcmconf8xx_t *pcmp; - u_long reg; - - debug ("voltage_set: " - PCMCIA_BOARD_MSG - " Slot %c, Vcc=%d.%d, Vpp=%d.%d\n", - 'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10); - - pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia)); - /* - * Disable PCMCIA buffers (isolate the interface) - * and assert RESET signal - */ - debug ("Disable PCMCIA buffers and assert RESET\n"); - reg = PCMCIA_PGCRX(_slot_); - reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */ - reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */ - PCMCIA_PGCRX(_slot_) = reg; - udelay(500); - - /* - * Configure Port C pins for - * 5 Volts Enable and 3 Volts enable, - * Turn all power pins to Hi-Z - */ - debug ("PCMCIA power OFF\n"); - cfg_ports (); /* Enables switch, but all in Hi-Z */ - - set_vppd(0, 1); set_vppd(1, 1); - - switch(vcc) { - case 0: - break; /* Switch off */ - - case 33: - set_vccd(0, 1); set_vccd(1, 0); - break; - - case 50: - set_vccd(0, 0); set_vccd(1, 1); - break; - - default: - goto done; - } - - /* Checking supported voltages */ - - debug ("PIPR: 0x%x --> %s\n", - pcmp->pcmc_pipr, - (pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V"); - -done: - debug ("Enable PCMCIA buffers and stop RESET\n"); - reg = PCMCIA_PGCRX(_slot_); - reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */ - reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */ - PCMCIA_PGCRX(_slot_) = reg; - udelay(500); - - debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n", - slot+'A'); - return (0); -} - -#endif /* CONFIG_PCMCIA */ diff --git a/board/netta/u-boot.lds b/board/netta/u-boot.lds deleted file mode 100644 index 0dff5a4..0000000 --- a/board/netta/u-boot.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/netta/u-boot.lds.debug b/board/netta/u-boot.lds.debug deleted file mode 100644 index a198cf9..0000000 --- a/board/netta/u-boot.lds.debug +++ /dev/null @@ -1,121 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text) - common/dlmalloc.o (.text) - lib/vsprintf.o (.text) - lib/crc32.o (.text) - - . = env_offset; - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/netta2/Makefile b/board/netta2/Makefile deleted file mode 100644 index c3bfb0d..0000000 --- a/board/netta2/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = netta2.o flash.o diff --git a/board/netta2/flash.c b/board/netta2/flash.c deleted file mode 100644 index 133f36d..0000000 --- a/board/netta2/flash.c +++ /dev/null @@ -1,490 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size(vu_long * addr, flash_info_t * info); -static int write_byte(flash_info_t * info, ulong dest, uchar data); -static void flash_get_offsets(ulong base, flash_info_t * info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init(void) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - unsigned long size; - int i; - - /* Init: no FLASHes known */ - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) - flash_info[i].flash_id = FLASH_UNKNOWN; - - size = flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size, size << 20); - } - - /* Remap FLASH according to real size */ - memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000); - memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | (memctl->memc_br0 & ~(BR_BA_MSK)); - - /* Re-do sizing to get full correct info */ - size = flash_get_size((vu_long *) CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_get_offsets(CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0]); - - flash_protect ( FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[0]); - -#ifdef CONFIG_ENV_ADDR_REDUND - flash_protect ( FLAG_PROTECT_SET, - CONFIG_ENV_ADDR_REDUND, - CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[0]); -#endif - - flash_info[0].size = size; - - return (size); -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets(ulong base, flash_info_t * info) -{ - int i; - - /* set up sector start address table */ - if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) { - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00010000); - } - } else if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00010000) - 0x00030000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00010000; - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info(flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - printf("AMD "); - break; - case FLASH_MAN_FUJ: - printf("FUJITSU "); - break; - case FLASH_MAN_MX: - printf("MXIC "); - break; - default: - printf("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM040: - printf("AM29LV040B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400B: - printf("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: - printf("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: - printf("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: - printf("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: - printf("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: - printf("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: - printf("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: - printf("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - default: - printf("Unknown Chip Type\n"); - break; - } - - printf(" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count); - - printf(" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf("\n "); - printf(" %08lX%s", info->start[i], info->protect[i] ? " (RO)" : " "); - } - printf("\n"); -} - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -static ulong flash_get_size(vu_long * addr, flash_info_t * info) -{ - short i; - uchar mid; - uchar pid; - vu_char *caddr = (vu_char *) addr; - ulong base = (ulong) addr; - - /* Write auto select command: read Manufacturer ID */ - caddr[0x0555] = 0xAA; - caddr[0x02AA] = 0x55; - caddr[0x0555] = 0x90; - - mid = caddr[0]; - switch (mid) { - case (AMD_MANUFACT & 0xFF): - info->flash_id = FLASH_MAN_AMD; - break; - case (FUJ_MANUFACT & 0xFF): - info->flash_id = FLASH_MAN_FUJ; - break; - case (MX_MANUFACT & 0xFF): - info->flash_id = FLASH_MAN_MX; - break; - case (STM_MANUFACT & 0xFF): - info->flash_id = FLASH_MAN_STM; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - pid = caddr[1]; /* device ID */ - switch (pid) { - case (AMD_ID_LV400T & 0xFF): - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00080000; - break; /* => 512 kB */ - - case (AMD_ID_LV400B & 0xFF): - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00080000; - break; /* => 512 kB */ - - case (AMD_ID_LV800T & 0xFF): - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (AMD_ID_LV800B & 0xFF): - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (AMD_ID_LV160T & 0xFF): - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (AMD_ID_LV160B & 0xFF): - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (AMD_ID_LV040B & 0xFF): - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x00080000; - break; - - case (STM_ID_M29W040B & 0xFF): - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x00080000; - break; - -#if 0 /* enable when device IDs are available */ - case (AMD_ID_LV320T & 0xFF): - info->flash_id += FLASH_AM320T; - info->sector_count = 67; - info->size = 0x00400000; - break; /* => 4 MB */ - - case (AMD_ID_LV320B & 0xFF): - info->flash_id += FLASH_AM320B; - info->sector_count = 67; - info->size = 0x00400000; - break; /* => 4 MB */ -#endif - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - - printf(" "); - /* set up sector start address table */ - if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) { - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00010000); - } - } else if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00010000) - 0x00030000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00010000; - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection: D0 = 1 if protected */ - caddr = (volatile unsigned char *)(info->start[i]); - info->protect[i] = caddr[2] & 1; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - caddr = (vu_char *) info->start[0]; - - caddr[0x0555] = 0xAA; - caddr[0x02AA] = 0x55; - caddr[0x0555] = 0xF0; - - udelay(20000); - } - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase(flash_info_t * info, int s_first, int s_last) -{ - vu_char *addr = (vu_char *) (info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf("- missing\n"); - } else { - printf("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf("Can't erase unknown flash type %08lx - aborted\n", info->flash_id); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf("- Warning: %d protected sectors will not be erased!\n", prot); - } else { - printf("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0xAA; - addr[0x02AA] = 0x55; - addr[0x0555] = 0x80; - addr[0x0555] = 0xAA; - addr[0x02AA] = 0x55; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (vu_char *) (info->start[sect]); - addr[0] = 0x30; - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay(1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer(0); - last = start; - addr = (vu_char *) (info->start[l_sect]); - while ((addr[0] & 0x80) != 0x80) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc('.'); - last = now; - } - } - -DONE: - /* reset to read mode */ - addr = (vu_char *) info->start[0]; - addr[0] = 0xF0; /* reset bank */ - - printf(" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - int rc; - - while (cnt > 0) { - if ((rc = write_byte(info, addr++, *src++)) != 0) { - return (rc); - } - --cnt; - } - - return (0); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_byte(flash_info_t * info, ulong dest, uchar data) -{ - vu_char *addr = (vu_char *) (info->start[0]); - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_char *) dest) & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0xAA; - addr[0x02AA] = 0x55; - addr[0x0555] = 0xA0; - - *((vu_char *) dest) = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer(0); - while ((*((vu_char *) dest) & 0x80) != (data & 0x80)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} diff --git a/board/netta2/netta2.c b/board/netta2/netta2.c deleted file mode 100644 index 008ae67..0000000 --- a/board/netta2/netta2.c +++ /dev/null @@ -1,624 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Pantelis Antoniou, Intracom S.A., panto@intracom.gr - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Pantelis Antoniou, Intracom S.A., panto@intracom.gr - * U-Boot port on NetTA4 board - */ - -#include -#include - -#include "mpc8xx.h" - -#ifdef CONFIG_HW_WATCHDOG -#include -#endif - -int fec8xx_miiphy_read(char *devname, unsigned char addr, - unsigned char reg, unsigned short *value); -int fec8xx_miiphy_write(char *devname, unsigned char addr, - unsigned char reg, unsigned short value); - -/****************************************************************/ - -/* some sane bit macros */ -#define _BD(_b) (1U << (31-(_b))) -#define _BDR(_l, _h) (((((1U << (31-(_l))) - 1) << 1) | 1) & ~((1U << (31-(_h))) - 1)) - -#define _BW(_b) (1U << (15-(_b))) -#define _BWR(_l, _h) (((((1U << (15-(_l))) - 1) << 1) | 1) & ~((1U << (15-(_h))) - 1)) - -#define _BB(_b) (1U << (7-(_b))) -#define _BBR(_l, _h) (((((1U << (7-(_l))) - 1) << 1) | 1) & ~((1U << (7-(_h))) - 1)) - -#define _B(_b) _BD(_b) -#define _BR(_l, _h) _BDR(_l, _h) - -/****************************************************************/ - -/* - * Check Board Identity: - * - * Return 1 always. - */ - -int checkboard(void) -{ - printf ("Intracom NetTA2 V%d\n", CONFIG_NETTA2_VERSION); - return (0); -} - -/****************************************************************/ - -#define _NOT_USED_ 0xFFFFFFFF - -/****************************************************************/ - -#define CS_0000 0x00000000 -#define CS_0001 0x10000000 -#define CS_0010 0x20000000 -#define CS_0011 0x30000000 -#define CS_0100 0x40000000 -#define CS_0101 0x50000000 -#define CS_0110 0x60000000 -#define CS_0111 0x70000000 -#define CS_1000 0x80000000 -#define CS_1001 0x90000000 -#define CS_1010 0xA0000000 -#define CS_1011 0xB0000000 -#define CS_1100 0xC0000000 -#define CS_1101 0xD0000000 -#define CS_1110 0xE0000000 -#define CS_1111 0xF0000000 - -#define BS_0000 0x00000000 -#define BS_0001 0x01000000 -#define BS_0010 0x02000000 -#define BS_0011 0x03000000 -#define BS_0100 0x04000000 -#define BS_0101 0x05000000 -#define BS_0110 0x06000000 -#define BS_0111 0x07000000 -#define BS_1000 0x08000000 -#define BS_1001 0x09000000 -#define BS_1010 0x0A000000 -#define BS_1011 0x0B000000 -#define BS_1100 0x0C000000 -#define BS_1101 0x0D000000 -#define BS_1110 0x0E000000 -#define BS_1111 0x0F000000 - -#define GPL0_AAAA 0x00000000 -#define GPL0_AAA0 0x00200000 -#define GPL0_AAA1 0x00300000 -#define GPL0_000A 0x00800000 -#define GPL0_0000 0x00A00000 -#define GPL0_0001 0x00B00000 -#define GPL0_111A 0x00C00000 -#define GPL0_1110 0x00E00000 -#define GPL0_1111 0x00F00000 - -#define GPL1_0000 0x00000000 -#define GPL1_0001 0x00040000 -#define GPL1_1110 0x00080000 -#define GPL1_1111 0x000C0000 - -#define GPL2_0000 0x00000000 -#define GPL2_0001 0x00010000 -#define GPL2_1110 0x00020000 -#define GPL2_1111 0x00030000 - -#define GPL3_0000 0x00000000 -#define GPL3_0001 0x00004000 -#define GPL3_1110 0x00008000 -#define GPL3_1111 0x0000C000 - -#define GPL4_0000 0x00000000 -#define GPL4_0001 0x00001000 -#define GPL4_1110 0x00002000 -#define GPL4_1111 0x00003000 - -#define GPL5_0000 0x00000000 -#define GPL5_0001 0x00000400 -#define GPL5_1110 0x00000800 -#define GPL5_1111 0x00000C00 -#define LOOP 0x00000080 - -#define EXEN 0x00000040 - -#define AMX_COL 0x00000000 -#define AMX_ROW 0x00000020 -#define AMX_MAR 0x00000030 - -#define NA 0x00000008 - -#define UTA 0x00000004 - -#define TODT 0x00000002 - -#define LAST 0x00000001 - -#define A10_AAAA GPL0_AAAA -#define A10_AAA0 GPL0_AAA0 -#define A10_AAA1 GPL0_AAA1 -#define A10_000A GPL0_000A -#define A10_0000 GPL0_0000 -#define A10_0001 GPL0_0001 -#define A10_111A GPL0_111A -#define A10_1110 GPL0_1110 -#define A10_1111 GPL0_1111 - -#define RAS_0000 GPL1_0000 -#define RAS_0001 GPL1_0001 -#define RAS_1110 GPL1_1110 -#define RAS_1111 GPL1_1111 - -#define CAS_0000 GPL2_0000 -#define CAS_0001 GPL2_0001 -#define CAS_1110 GPL2_1110 -#define CAS_1111 GPL2_1111 - -#define WE_0000 GPL3_0000 -#define WE_0001 GPL3_0001 -#define WE_1110 GPL3_1110 -#define WE_1111 GPL3_1111 - -/* #define CAS_LATENCY 3 */ -#define CAS_LATENCY 2 - -const uint sdram_table[0x40] = { - -#if CAS_LATENCY == 3 - /* RSS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_0000 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */ - CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */ - _NOT_USED_, _NOT_USED_, - - /* RBS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_0001 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */ - CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL, /* PALL */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | TODT | LAST, /* NOP */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* WSS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_0000 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL | UTA, /* WRITE */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* WBS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL, /* WRITE */ - CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0001 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, -#endif - -#if CAS_LATENCY == 2 - /* RSS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_0001 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */ - CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL, /* NOP */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, - - /* RBS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */ - CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0001 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL, /* NOP */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* WSS */ - CS_0001 | BS_1111 | A10_AAA0 | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL, /* NOP */ - CS_0000 | BS_0001 | A10_0001 | RAS_1110 | CAS_0001 | WE_0000 | AMX_COL | UTA, /* WRITE */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, - _NOT_USED_, - - /* WBS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL, /* NOP */ - CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0001 | AMX_COL, /* WRITE */ - CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1110 | BS_0001 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL | UTA, /* NOP */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, /* PALL */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, - -#endif - - /* UPT */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_0001 | WE_1111 | AMX_COL | UTA | LOOP, /* ATRFR */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | LOOP, /* NOP */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, - - /* EXC */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | LAST, - _NOT_USED_, - - /* REG */ - CS_1110 | BS_1111 | A10_1110 | RAS_1110 | CAS_1110 | WE_1110 | AMX_MAR | UTA, - CS_0001 | BS_1111 | A10_0001 | RAS_0001 | CAS_0001 | WE_0001 | AMX_MAR | UTA | LAST, -}; - -#if CONFIG_NETTA2_VERSION == 2 -static const uint nandcs_table[0x40] = { - /* RSS */ - CS_1000 | GPL4_1111 | GPL5_1111 | UTA, - CS_0000 | GPL4_1110 | GPL5_1111 | UTA, - CS_0000 | GPL4_0000 | GPL5_1111 | UTA, - CS_0000 | GPL4_0000 | GPL5_1111 | UTA, - CS_0000 | GPL4_0000 | GPL5_1111, - CS_0000 | GPL4_0001 | GPL5_1111 | UTA, - CS_0000 | GPL4_1111 | GPL5_1111 | UTA, - CS_0011 | GPL4_1111 | GPL5_1111 | UTA | LAST, /* NOP */ - - /* RBS */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* WSS */ - CS_1000 | GPL4_1111 | GPL5_1110 | UTA, - CS_0000 | GPL4_1111 | GPL5_0000 | UTA, - CS_0000 | GPL4_1111 | GPL5_0000 | UTA, - CS_0000 | GPL4_1111 | GPL5_0000 | UTA, - CS_0000 | GPL4_1111 | GPL5_0001 | UTA, - CS_0000 | GPL4_1111 | GPL5_1111 | UTA, - CS_0000 | GPL4_1111 | GPL5_1111, - CS_0011 | GPL4_1111 | GPL5_1111 | UTA | LAST, - - /* WBS */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* UPT */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* EXC */ - CS_0001 | LAST, - _NOT_USED_, - - /* REG */ - CS_1110 , - CS_0001 | LAST, -}; -#endif - -/* 0xC8 = 0b11001000 , CAS3, >> 2 = 0b00 11 0 010 */ -/* 0x88 = 0b10001000 , CAS2, >> 2 = 0b00 10 0 010 */ -#define MAR_SDRAM_INIT ((CAS_LATENCY << 6) | 0x00000008LU) - -/* 8 */ -#define CONFIG_SYS_MAMR ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -void check_ram(unsigned int addr, unsigned int size) -{ - unsigned int i, j, v, vv; - volatile unsigned int *p; - unsigned int pv; - - p = (unsigned int *)addr; - pv = (unsigned int)p; - for (i = 0; i < size / sizeof(unsigned int); i++, pv += sizeof(unsigned int)) - *p++ = pv; - - p = (unsigned int *)addr; - for (i = 0; i < size / sizeof(unsigned int); i++) { - v = (unsigned int)p; - vv = *p; - if (vv != v) { - printf("%p: read %08x instead of %08x\n", p, vv, v); - hang(); - } - p++; - } - - for (j = 0; j < 5; j++) { - switch (j) { - case 0: v = 0x00000000; break; - case 1: v = 0xffffffff; break; - case 2: v = 0x55555555; break; - case 3: v = 0xaaaaaaaa; break; - default:v = 0xdeadbeef; break; - } - p = (unsigned int *)addr; - for (i = 0; i < size / sizeof(unsigned int); i++) { - *p = v; - vv = *p; - if (vv != v) { - printf("%p: read %08x instead of %08x\n", p, vv, v); - hang(); - } - *p = ~v; - p++; - } - } -} - -phys_size_t initdram(int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size; - - upmconfig(UPMB, (uint *) sdram_table, sizeof(sdram_table) / sizeof(sdram_table[0])); - - /* - * Preliminary prescaler for refresh - */ - memctl->memc_mptpr = MPTPR_PTP_DIV8; - - memctl->memc_mar = MAR_SDRAM_INIT; /* 32-bit address to be output on the address bus if AMX = 0b11 */ - - /* - * Map controller bank 3 to the SDRAM bank at preliminary address. - */ - memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM; - memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM; - - memctl->memc_mbmr = CONFIG_SYS_MAMR & ~MAMR_PTAE; /* no refresh yet */ - - udelay(200); - - /* perform SDRAM initialisation sequence */ - memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x3C); /* precharge all */ - udelay(1); - - memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(2) | MCR_MAD(0x30); /* refresh 2 times(0) */ - udelay(1); - - memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x3E); /* exception program (write mar)*/ - udelay(1); - - memctl->memc_mbmr |= MAMR_PTAE; /* enable refresh */ - - udelay(10000); - - { - u32 d1, d2; - - d1 = 0xAA55AA55; - *(volatile u32 *)0 = d1; - d2 = *(volatile u32 *)0; - if (d1 != d2) { - printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2); - hang(); - } - - d1 = 0x55AA55AA; - *(volatile u32 *)0 = d1; - d2 = *(volatile u32 *)0; - if (d1 != d2) { - printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2); - hang(); - } - } - - size = get_ram_size((long *)0, SDRAM_MAX_SIZE); - - if (size == 0) { - printf("SIZE is zero: LOOP on 0\n"); - for (;;) { - *(volatile u32 *)0 = 0; - (void)*(volatile u32 *)0; - } - } - - return size; -} - -/* ------------------------------------------------------------------------- */ - -void reset_phys(void) -{ - int phyno; - unsigned short v; - - udelay(10000); - /* reset the damn phys */ - mii_init(); - - for (phyno = 0; phyno < 32; ++phyno) { - fec8xx_miiphy_read(NULL, phyno, MII_PHYSID1, &v); - if (v == 0xFFFF) - continue; - fec8xx_miiphy_write(NULL, phyno, MII_BMCR, BMCR_PDOWN); - udelay(10000); - fec8xx_miiphy_write(NULL, phyno, MII_BMCR, - BMCR_RESET | BMCR_ANENABLE); - udelay(10000); - } -} - -/* ------------------------------------------------------------------------- */ - -/* GP = general purpose, SP = special purpose (on chip peripheral) */ - -/* bits that can have a special purpose or can be configured as inputs/outputs */ -#define PA_GP_INMASK 0 -#define PA_GP_OUTMASK (_BW(3) | _BW(7) | _BW(10) | _BW(14) | _BW(15)) -#define PA_SP_MASK 0 -#define PA_ODR_VAL 0 -#define PA_GP_OUTVAL (_BW(3) | _BW(14) | _BW(15)) -#define PA_SP_DIRVAL 0 - -#define PB_GP_INMASK _B(28) -#define PB_GP_OUTMASK (_B(19) | _B(23) | _B(26) | _B(27) | _B(29) | _B(30)) -#define PB_SP_MASK (_BR(22, 25)) -#define PB_ODR_VAL 0 -#define PB_GP_OUTVAL (_B(26) | _B(27) | _B(29) | _B(30)) -#define PB_SP_DIRVAL 0 - -#if CONFIG_NETTA2_VERSION == 1 -#define PC_GP_INMASK _BW(12) -#define PC_GP_OUTMASK (_BW(10) | _BW(11) | _BW(13) | _BW(15)) -#elif CONFIG_NETTA2_VERSION == 2 -#define PC_GP_INMASK (_BW(13) | _BW(15)) -#define PC_GP_OUTMASK (_BW(10) | _BW(11) | _BW(12)) -#endif -#define PC_SP_MASK 0 -#define PC_SOVAL 0 -#define PC_INTVAL 0 -#define PC_GP_OUTVAL (_BW(10) | _BW(11)) -#define PC_SP_DIRVAL 0 - -#if CONFIG_NETTA2_VERSION == 1 -#define PE_GP_INMASK _B(31) -#define PE_GP_OUTMASK (_B(17) | _B(18) |_B(20) | _B(24) | _B(27) | _B(28) | _B(29) | _B(30)) -#define PE_GP_OUTVAL (_B(20) | _B(24) | _B(27) | _B(28)) -#elif CONFIG_NETTA2_VERSION == 2 -#define PE_GP_INMASK _BR(28, 31) -#define PE_GP_OUTMASK (_B(17) | _B(18) |_B(20) | _B(24) | _B(27)) -#define PE_GP_OUTVAL (_B(20) | _B(24) | _B(27)) -#endif -#define PE_SP_MASK 0 -#define PE_ODR_VAL 0 -#define PE_SP_DIRVAL 0 - -int board_early_init_f(void) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile iop8xx_t *ioport = &immap->im_ioport; - volatile cpm8xx_t *cpm = &immap->im_cpm; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - /* NAND chip select */ -#if CONFIG_NETTA2_VERSION == 1 - memctl->memc_or1 = ((0xFFFFFFFFLU & ~(NAND_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_8_CLK | OR_EHTR | OR_TRLX); - memctl->memc_br1 = ((NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_V); -#elif CONFIG_NETTA2_VERSION == 2 - upmconfig(UPMA, (uint *) nandcs_table, sizeof(nandcs_table) / sizeof(nandcs_table[0])); - memctl->memc_or1 = ((0xFFFFFFFFLU & ~(NAND_SIZE - 1)) | OR_BI | OR_G5LS); - memctl->memc_br1 = ((NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_V | BR_MS_UPMA); - memctl->memc_mamr = 0; /* all clear */ -#endif - - /* DSP chip select */ - memctl->memc_or2 = ((0xFFFFFFFFLU & ~(DSP_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_ACS_DIV2 | OR_SETA | OR_TRLX); - memctl->memc_br2 = ((DSP_BASE & BR_BA_MSK) | BR_PS_16 | BR_V); - -#if CONFIG_NETTA2_VERSION == 1 - memctl->memc_br4 &= ~BR_V; -#endif - memctl->memc_br5 &= ~BR_V; - memctl->memc_br6 &= ~BR_V; - memctl->memc_br7 &= ~BR_V; - - ioport->iop_padat = PA_GP_OUTVAL; - ioport->iop_paodr = PA_ODR_VAL; - ioport->iop_padir = PA_GP_OUTMASK | PA_SP_DIRVAL; - ioport->iop_papar = PA_SP_MASK; - - cpm->cp_pbdat = PB_GP_OUTVAL; - cpm->cp_pbodr = PB_ODR_VAL; - cpm->cp_pbdir = PB_GP_OUTMASK | PB_SP_DIRVAL; - cpm->cp_pbpar = PB_SP_MASK; - - ioport->iop_pcdat = PC_GP_OUTVAL; - ioport->iop_pcdir = PC_GP_OUTMASK | PC_SP_DIRVAL; - ioport->iop_pcso = PC_SOVAL; - ioport->iop_pcint = PC_INTVAL; - ioport->iop_pcpar = PC_SP_MASK; - - cpm->cp_pedat = PE_GP_OUTVAL; - cpm->cp_peodr = PE_ODR_VAL; - cpm->cp_pedir = PE_GP_OUTMASK | PE_SP_DIRVAL; - cpm->cp_pepar = PE_SP_MASK; - - return 0; -} - -#ifdef CONFIG_HW_WATCHDOG - -void hw_watchdog_reset(void) -{ - /* XXX add here the really funky stuff */ -} - -#endif - -#if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE) -int overwrite_console(void) -{ - /* printf("overwrite_console called\n"); */ - return 0; -} -#endif - -extern int drv_phone_init(void); -extern int drv_phone_use_me(void); -extern int drv_phone_is_idle(void); - -int misc_init_r(void) -{ - return 0; -} - -int last_stage_init(void) -{ -#if CONFIG_NETTA2_VERSION == 2 - int i; -#endif - -#if CONFIG_NETTA2_VERSION == 2 - /* assert peripheral reset */ - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat &= ~_BW(12); - for (i = 0; i < 10; i++) - udelay(1000); - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat |= _BW(12); -#endif - reset_phys(); - - return 0; -} diff --git a/board/netta2/u-boot.lds b/board/netta2/u-boot.lds deleted file mode 100644 index 0dff5a4..0000000 --- a/board/netta2/u-boot.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/netta2/u-boot.lds.debug b/board/netta2/u-boot.lds.debug deleted file mode 100644 index a198cf9..0000000 --- a/board/netta2/u-boot.lds.debug +++ /dev/null @@ -1,121 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text) - common/dlmalloc.o (.text) - lib/vsprintf.o (.text) - lib/crc32.o (.text) - - . = env_offset; - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/boards.cfg b/boards.cfg index cedf69b..e5d565e 100644 --- a/boards.cfg +++ b/boards.cfg @@ -993,18 +993,6 @@ Active powerpc mpc8xx - - ivm Active powerpc mpc8xx - - ivm IVMS8 IVMS8:IVMS8_16M Wolfgang Denk Active powerpc mpc8xx - - ivm IVMS8_128 IVMS8:IVMS8_32M Wolfgang Denk Active powerpc mpc8xx - - ivm IVMS8_256 IVMS8:IVMS8_64M Wolfgang Denk -Active powerpc mpc8xx - - netphone NETPHONE NETPHONE:NETPHONE_VERSION=1 - -Active powerpc mpc8xx - - netphone NETPHONE_V2 NETPHONE:NETPHONE_VERSION=2 - -Active powerpc mpc8xx - - netta NETTA - - -Active powerpc mpc8xx - - netta NETTA_6412 NETTA:NETTA_6412=1 - -Active powerpc mpc8xx - - netta NETTA_6412_SWAPHOOK NETTA:NETTA_6412=1,NETTA_SWAPHOOK=1 - -Active powerpc mpc8xx - - netta NETTA_ISDN NETTA:NETTA_ISDN=1 - -Active powerpc mpc8xx - - netta NETTA_ISDN_6412 NETTA:NETTA_ISDN=1,NETTA_6412=1 - -Active powerpc mpc8xx - - netta NETTA_ISDN_6412_SWAPHOOK NETTA:NETTA_ISDN=1,NETTA_6412=1,NETTA_SWAPHOOK=1 - -Active powerpc mpc8xx - - netta NETTA_ISDN_SWAPHOOK NETTA:NETTA_ISDN=1,NETTA_SWAPHOOK=1 - -Active powerpc mpc8xx - - netta NETTA_SWAPHOOK NETTA:NETTA_SWAPHOOK=1 - -Active powerpc mpc8xx - - netta2 NETTA2 NETTA2:NETTA2_VERSION=1 - -Active powerpc mpc8xx - - netta2 NETTA2_V2 NETTA2:NETTA2_VERSION=2 - Active powerpc mpc8xx - - netvia NETVIA NETVIA:NETVIA_VERSION=1 Pantelis Antoniou Active powerpc mpc8xx - - netvia NETVIA_V2 NETVIA:NETVIA_VERSION=2 Pantelis Antoniou Active powerpc mpc8xx - - r360mpi R360MPI - Wolfgang Denk diff --git a/doc/README.scrapyard b/doc/README.scrapyard index fe666a5..c28bb52 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,9 @@ easily if here is something they might want to dig for... Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +netphone powerpc mpc8xx - - +netta2 powerpc mpc8xx - - +netta powerpc mpc8xx - - rbc823 powerpc mpc8xx - - quantum powerpc mpc8xx - - RPXlite_dw powerpc mpc8xx - - diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h deleted file mode 100644 index 08cfc9e..0000000 --- a/include/configs/NETPHONE.h +++ /dev/null @@ -1,701 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Pantelis Antoniou, Intracom S.A., panto@intracom.gr - * U-Boot port on NetTA4 board - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#if !defined(CONFIG_NETPHONE_VERSION) || CONFIG_NETPHONE_VERSION > 2 -#error Unsupported CONFIG_NETPHONE version -#endif - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC870 1 /* This is a MPC885 CPU */ -#define CONFIG_NETPHONE 1 /* ...on a NetPhone board */ - -#define CONFIG_SYS_TEXT_BASE 0x40000000 - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE - -#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ - -/* #define CONFIG_XIN 10000000 */ -#define CONFIG_XIN 50000000 -/* #define MPC8XX_HZ 120000000 */ -#define MPC8XX_HZ 66666666 - -#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ - -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#undef CONFIG_CLOCKS_IN_MHZ /* clocks NOT passsed to Linux in MHz */ - -#define CONFIG_PREBOOT "echo;" - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "tftpboot; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \ - "bootm" - -#define CONFIG_SOURCE -#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ - -#define CONFIG_STATUS_LED 1 /* Status LED enabled */ -#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_NISDOMAIN - -#undef CONFIG_MAC_PARTITION -#undef CONFIG_DOS_PARTITION - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - -#define FEC_ENET 1 /* eth.c needs it that way... */ -#undef CONFIG_SYS_DISCOVER_PHY -#define CONFIG_MII 1 -#define CONFIG_MII_INIT 1 -#define CONFIG_RMII 1 /* use RMII interface */ - -#define CONFIG_ETHER_ON_FEC1 1 -#define CONFIG_FEC1_PHY 8 /* phy address of FEC */ -#define CONFIG_FEC1_PHY_NORXERR 1 - -#define CONFIG_ETHER_ON_FEC2 1 -#define CONFIG_FEC2_PHY 4 -#define CONFIG_FEC2_PHY_NORXERR 1 - -#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */ - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_MII -#define CONFIG_CMD_CDP - - -#define CONFIG_BOARD_EARLY_INIT_F 1 -#define CONFIG_MISC_INIT_R - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#define CONFIG_SYS_HUSH_PARSER 1 - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0300000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFF000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x40000000 -#if defined(DEBUG) -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#endif -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#if CONFIG_NETPHONE_VERSION == 2 -#define CONFIG_SYS_FLASH_BASE4 0x40080000 -#endif - -#define CONFIG_SYS_RESET_ADDRESS 0x80000000 - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#if CONFIG_NETPHONE_VERSION == 1 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#elif CONFIG_NETPHONE_VERSION == 2 -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#endif -#define CONFIG_SYS_MAX_FLASH_SECT 8 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE 0x10000 - -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x60000) -#define CONFIG_ENV_SIZE 0x4000 - -#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + 0x70000) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#ifndef CONFIG_CAN_DRIVER -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC) -#else /* we must activate GPL5 in the SIUMCR for CAN */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC) -#endif /* CONFIG_CAN_DRIVER */ - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - * - */ - -#if CONFIG_XIN == 10000000 - -#if MPC8XX_HZ == 120000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 100000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 50000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 25000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 40000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 75000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#else -#error unsupported CPU freq for XIN = 10MHz -#endif - -#elif CONFIG_XIN == 50000000 - -#if MPC8XX_HZ == 120000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 100000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 66666666 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#else -#error unsupported CPU freq for XIN = 50MHz -#endif - -#else - -#error unsupported XIN freq -#endif - - -/* - *----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - * - * Note: When TBS == 0 the timebase is independent of current cpu clock. - */ - -#define SCCR_MASK SCCR_EBDF11 -#if MPC8XX_HZ > 66666666 -#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00 | SCCR_EBDF01) -#else -#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00) -#endif - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -/*#define CONFIG_SYS_DER 0x2002000F*/ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ - -/* used to re-map FLASH both when starting from SRAM or FLASH: - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ - -/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX) - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V ) - -#if CONFIG_NETPHONE_VERSION == 2 - -#define FLASH_BASE4_PRELIM 0x40080000 /* FLASH bank #1 */ - -#define CONFIG_SYS_OR4_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR4_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR4_PRELIM ((FLASH_BASE4_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V ) - -#endif - -/* - * BR3 and OR3 (SDRAM) - * - */ -#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank #0 */ -#define SDRAM_MAX_SIZE (256 << 20) /* max 256MB per bank */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ -#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM | OR_G5LS) - -#define CONFIG_SYS_OR3_PRELIM ((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM) -#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V) - -/* - * Memory Periodic Timer Prescaler - */ - -/* - * Memory Periodic Timer Prescaler - * - * The Divider for PTA (refresh timer) configuration is based on an - * example SDRAM configuration (64 MBit, one bank). The adjustment to - * the number of chip selects (NCS) and the actually needed refresh - * rate is done by setting MPTPR. - * - * PTA is calculated from - * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS) - * - * gclk CPU clock (not bus clock!) - * Trefresh Refresh cycle * 4 (four word bursts used) - * - * 4096 Rows from SDRAM example configuration - * 1000 factor s -> ms - * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration - * 4 Number of refresh cycles per period - * 64 Refresh cycle in ms per number of rows - * -------------------------------------------- - * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000 - * - * 50 MHz => 50.000.000 / Divider = 98 - * 66 Mhz => 66.000.000 / Divider = 129 - * 80 Mhz => 80.000.000 / Divider = 156 - */ - -#define CONFIG_SYS_MAMR_PTA 234 - -/* - * For 16 MBit, refresh rates could be 31.3 us - * (= 64 ms / 2K = 125 / quad bursts). - * For a simpler initialization, 15.6 us is used instead. - * - * #define CONFIG_SYS_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks - * #define CONFIG_SYS_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank - */ -#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ - -/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ -#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ - -/* - * MAMR settings for SDRAM - */ - -/* 8 column SDRAM */ -#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* 9 column SDRAM */ -#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -#define CONFIG_LAST_STAGE_INIT /* needed to reset the damn phys */ - -/****************************************************************/ - -#define DSP_SIZE 0x00010000 /* 64K */ -#define NAND_SIZE 0x00010000 /* 64K */ - -#define DSP_BASE 0xF1000000 -#define NAND_BASE 0xF1010000 - -/*****************************************************************************/ - -#define CONFIG_SYS_DIRECT_FLASH_TFTP - -/*****************************************************************************/ - -#if CONFIG_NETPHONE_VERSION == 1 -#define STATUS_LED_BIT 0x00000008 /* bit 28 */ -#elif CONFIG_NETPHONE_VERSION == 2 -#define STATUS_LED_BIT 0x00000080 /* bit 24 */ -#endif - -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -#define STATUS_LED_STATE STATUS_LED_BLINKING - -#define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */ -#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ - -#ifndef __ASSEMBLY__ - -/* LEDs */ - -/* led_id_t is unsigned int mask */ -typedef unsigned int led_id_t; - -#define __led_toggle(_msk) \ - do { \ - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat ^= (_msk); \ - } while(0) - -#define __led_set(_msk, _st) \ - do { \ - if ((_st)) \ - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat |= (_msk); \ - else \ - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat &= ~(_msk); \ - } while(0) - -#define __led_init(msk, st) __led_set(msk, st) - -#endif - -/*********************************************************************************************************** - - ---------------------------------------------------------------------------------------------- - - (V1) version 1 of the board - (V2) version 2 of the board - - ---------------------------------------------------------------------------------------------- - - Pin definitions: - - +------+----------------+--------+------------------------------------------------------------ - | # | Name | Type | Comment - +------+----------------+--------+------------------------------------------------------------ - | PA3 | SPIEN_MAX | Output | MAX serial to uart chip select - | PA7 | DSP_INT | Output | DSP interrupt - | PA10 | DSP_RESET | Output | DSP reset - | PA14 | USBOE | Output | USB (1) - | PA15 | USBRXD | Output | USB (1) - | PB19 | BT_RTS | Output | Bluetooth (0) - | PB23 | BT_CTS | Output | Bluetooth (0) - | PB26 | SPIEN_SEP | Output | Serial EEPROM chip select - | PB27 | SPICS_DISP | Output | Display chip select - | PB28 | SPI_RXD_3V | Input | SPI Data Rx - | PB29 | SPI_TXD | Output | SPI Data Tx - | PB30 | SPI_CLK | Output | SPI Clock - | PC10 | DISPA0 | Output | Display A0 - | PC11 | BACKLIGHT | Output | Display backlit - | PC12 | SPI2RXD | Input | (V1) 2nd SPI RXD - | | IO_RESET | Output | (V2) General I/O reset - | PC13 | SPI2TXD | Output | (V1) 2nd SPI TXD (V1) - | | HOOK | Input | (V2) Hook input interrupt - | PC15 | SPI2CLK | Output | (V1) 2nd SPI CLK - | | F_RY_BY | Input | (V2) NAND F_RY_BY - | PE17 | F_ALE | Output | NAND F_ALE - | PE18 | F_CLE | Output | NAND F_CLE - | PE20 | F_CE | Output | NAND F_CE - | PE24 | SPICS_SCOUT | Output | (V1) Codec chip select - | | LED | Output | (V2) LED - | PE27 | SPICS_ER | Output | External serial register CS - | PE28 | LEDIO1 | Output | (V1) LED - | | BKBR1 | Input | (V2) Keyboard input scan - | PE29 | LEDIO2 | Output | (V1) LED hook for A (TA2) - | | BKBR2 | Input | (V2) Keyboard input scan - | PE30 | LEDIO3 | Output | (V1) LED hook for A (TA2) - | | BKBR3 | Input | (V2) Keyboard input scan - | PE31 | F_RY_BY | Input | (V1) NAND F_RY_BY - | | BKBR4 | Input | (V2) Keyboard input scan - +------+----------------+--------+--------------------------------------------------- - - ---------------------------------------------------------------------------------------------- - - Serial register input: - - +------+----------------+------------------------------------------------------------ - | # | Name | Comment - +------+----------------+------------------------------------------------------------ - | 0 | BKBR1 | (V1) Keyboard input scan - | 1 | BKBR3 | (V1) Keyboard input scan - | 2 | BKBR4 | (V1) Keyboard input scan - | 3 | BKBR2 | (V1) Keyboard input scan - | 4 | HOOK | (V1) Hook switch - | 5 | BT_LINK | (V1) Bluetooth link status - | 6 | HOST_WAKE | (V1) Bluetooth host wake up - | 7 | OK_ETH | (V1) Cisco inline power OK status - +------+----------------+------------------------------------------------------------ - - ---------------------------------------------------------------------------------------------- - - Serial register output: - - +------+----------------+------------------------------------------------------------ - | # | Name | Comment - +------+----------------+------------------------------------------------------------ - | 0 | KEY1 | Keyboard output scan - | 1 | KEY2 | Keyboard output scan - | 2 | KEY3 | Keyboard output scan - | 3 | KEY4 | Keyboard output scan - | 4 | KEY5 | Keyboard output scan - | 5 | KEY6 | Keyboard output scan - | 6 | KEY7 | Keyboard output scan - | 7 | BT_WAKE | Bluetooth wake up - +------+----------------+------------------------------------------------------------ - - ---------------------------------------------------------------------------------------------- - - Chip selects: - - +------+----------------+------------------------------------------------------------ - | # | Name | Comment - +------+----------------+------------------------------------------------------------ - | CS0 | CS0 | Boot flash - | CS1 | CS_FLASH | NAND flash - | CS2 | CS_DSP | DSP - | CS3 | DCS_DRAM | DRAM - | CS4 | CS_FLASH2 | (V2) 2nd flash - +------+----------------+------------------------------------------------------------ - - ---------------------------------------------------------------------------------------------- - - Interrupts: - - +------+----------------+------------------------------------------------------------ - | # | Name | Comment - +------+----------------+------------------------------------------------------------ - | IRQ1 | IRQ_DSP | DSP interrupt - | IRQ3 | S_INTER | DUSLIC ??? - | IRQ4 | F_RY_BY | NAND - | IRQ7 | IRQ_MAX | MAX 3100 interrupt - +------+----------------+------------------------------------------------------------ - - ---------------------------------------------------------------------------------------------- - - Interrupts on PCMCIA pins: - - +------+----------------+------------------------------------------------------------ - | # | Name | Comment - +------+----------------+------------------------------------------------------------ - | IP_A0| PHY1_LINK | Link status changed for #1 Ethernet interface - | IP_A1| PHY2_LINK | Link status changed for #2 Ethernet interface - | IP_A2| RMII1_MDINT | PHY interrupt for #1 - | IP_A3| RMII2_MDINT | PHY interrupt for #2 - | IP_A5| HOST_WAKE | (V2) Bluetooth host wake - | IP_A6| OK_ETH | (V2) Cisco inline power OK - +------+----------------+------------------------------------------------------------ - -*************************************************************************************************/ - -#define CONFIG_SED156X 1 /* use SED156X */ -#define CONFIG_SED156X_PG12864Q 1 /* type of display used */ - -/* serial interfacing macros */ - -#define SED156X_SPI_RXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat) -#define SED156X_SPI_RXD_MASK 0x00000008 - -#define SED156X_SPI_TXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat) -#define SED156X_SPI_TXD_MASK 0x00000004 - -#define SED156X_SPI_CLK_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat) -#define SED156X_SPI_CLK_MASK 0x00000002 - -#define SED156X_CS_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat) -#define SED156X_CS_MASK 0x00000010 - -#define SED156X_A0_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat) -#define SED156X_A0_MASK 0x0020 - -/*************************************************************************************************/ - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1 -#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE 1 - -/*************************************************************************************************/ - -/* use board specific hardware */ -#undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_HW_WATCHDOG -#define CONFIG_SHOW_ACTIVITY - -/*************************************************************************************************/ - -/* phone console configuration */ - -#define PHONE_CONSOLE_POLL_HZ (CONFIG_SYS_HZ/200) /* poll every 5ms */ - -/*************************************************************************************************/ - -#define CONFIG_CDP_DEVICE_ID 20 -#define CONFIG_CDP_DEVICE_ID_PREFIX "NP" /* netphone */ -#define CONFIG_CDP_PORT_ID "eth%d" -#define CONFIG_CDP_CAPABILITIES 0x00000010 -#define CONFIG_CDP_VERSION "u-boot" " " U_BOOT_DATE " " U_BOOT_TIME -#define CONFIG_CDP_PLATFORM "Intracom NetPhone" -#define CONFIG_CDP_TRIGGER 0x20020001 -#define CONFIG_CDP_POWER_CONSUMPTION 4300 /* 90 mA @ 48V */ -#define CONFIG_CDP_APPLIANCE_VLAN_TYPE 0x01 /* ipphone */ - -/*************************************************************************************************/ - -#define CONFIG_AUTO_COMPLETE 1 - -/*************************************************************************************************/ - -#define CONFIG_CRC32_VERIFY 1 - -/*************************************************************************************************/ - -#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE 1 - -/*************************************************************************************************/ -#endif /* __CONFIG_H */ diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h deleted file mode 100644 index 800a922..0000000 --- a/include/configs/NETTA.h +++ /dev/null @@ -1,666 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Pantelis Antoniou, Intracom S.A., panto@intracom.gr - * U-Boot port on NetTA4 board - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC885 1 /* This is a MPC885 CPU */ -#define CONFIG_NETTA 1 /* ...on a NetTA board */ - -#define CONFIG_SYS_TEXT_BASE 0x40000000 - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE - -#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ - -/* #define CONFIG_XIN 10000000 */ -#define CONFIG_XIN 50000000 -#define MPC8XX_HZ 120000000 -/* #define MPC8XX_HZ 100000000 */ -/* #define MPC8XX_HZ 50000000 */ -/* #define MPC8XX_HZ 80000000 */ - -#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ - -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#undef CONFIG_CLOCKS_IN_MHZ /* clocks NOT passsed to Linux in MHz */ - -#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "tftpboot; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \ - "bootm" - -#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_HW_WATCHDOG - -#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_NISDOMAIN - - -#undef CONFIG_MAC_PARTITION -#undef CONFIG_DOS_PARTITION - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - -#define FEC_ENET 1 /* eth.c needs it that way... */ -#undef CONFIG_SYS_DISCOVER_PHY /* do not discover phys */ -#define CONFIG_MII 1 -#define CONFIG_MII_INIT 1 -#define CONFIG_RMII 1 /* use RMII interface */ - -#if defined(CONFIG_NETTA_ISDN) -#define CONFIG_ETHER_ON_FEC1 1 -#define CONFIG_FEC1_PHY 1 /* phy address of FEC1 */ -#define CONFIG_FEC1_PHY_NORXERR 1 -#undef CONFIG_ETHER_ON_FEC2 -#else -#define CONFIG_ETHER_ON_FEC1 1 -#define CONFIG_FEC1_PHY 8 /* phy address of FEC1 */ -#define CONFIG_FEC1_PHY_NORXERR 1 -#define CONFIG_ETHER_ON_FEC2 1 -#define CONFIG_FEC2_PHY 1 /* phy address of FEC2 */ -#define CONFIG_FEC2_PHY_NORXERR 1 -#endif - -#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */ - -/* POST support */ -#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \ - CONFIG_SYS_POST_CODEC | \ - CONFIG_SYS_POST_DSP ) - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_CDP -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_FAT -#define CONFIG_CMD_IDE -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PCMCIA -#define CONFIG_CMD_PING - - -#define CONFIG_BOARD_EARLY_INIT_F 1 -#define CONFIG_MISC_INIT_R - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#define CONFIG_SYS_HUSH_PARSER 1 - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0300000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFF000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x40000000 -#if defined(DEBUG) -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#endif -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 8 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE 0x10000 - -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x60000) -#define CONFIG_ENV_SIZE 0x4000 - -#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + 0x70000) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#ifndef CONFIG_CAN_DRIVER -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC) -#else /* we must activate GPL5 in the SIUMCR for CAN */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC) -#endif /* CONFIG_CAN_DRIVER */ - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - * - */ - -#if CONFIG_XIN == 10000000 - -#if MPC8XX_HZ == 120000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 100000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 50000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 25000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 40000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 75000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#else -#error unsupported CPU freq for XIN = 10MHz -#endif - -#elif CONFIG_XIN == 50000000 - -#if MPC8XX_HZ == 120000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 100000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 80000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (0 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 50000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (1 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#else -#error unsupported CPU freq for XIN = 50MHz -#endif - -#else - -#error unsupported XIN freq -#endif - - -/* - *----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - * - * Note: When TBS == 0 the timebase is independent of current cpu clock. - */ - -#define SCCR_MASK SCCR_EBDF11 -#if MPC8XX_HZ > 66666666 -#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL111 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00 | SCCR_EBDF01) -#else -#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL111 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00) -#endif - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -/*#define CONFIG_SYS_DER 0x2002000F*/ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ - -/* used to re-map FLASH both when starting from SRAM or FLASH: - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ - -/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX) - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V ) - -/* - * BR3 and OR3 (SDRAM) - * - */ -#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank #0 */ -#define SDRAM_MAX_SIZE (256 << 20) /* max 256MB per bank */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ -#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM | OR_G5LS) - -#define CONFIG_SYS_OR3_PRELIM ((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM) -#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V) - -/* - * Memory Periodic Timer Prescaler - */ - -/* - * Memory Periodic Timer Prescaler - * - * The Divider for PTA (refresh timer) configuration is based on an - * example SDRAM configuration (64 MBit, one bank). The adjustment to - * the number of chip selects (NCS) and the actually needed refresh - * rate is done by setting MPTPR. - * - * PTA is calculated from - * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS) - * - * gclk CPU clock (not bus clock!) - * Trefresh Refresh cycle * 4 (four word bursts used) - * - * 4096 Rows from SDRAM example configuration - * 1000 factor s -> ms - * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration - * 4 Number of refresh cycles per period - * 64 Refresh cycle in ms per number of rows - * -------------------------------------------- - * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000 - * - * 50 MHz => 50.000.000 / Divider = 98 - * 66 Mhz => 66.000.000 / Divider = 129 - * 80 Mhz => 80.000.000 / Divider = 156 - */ - -#if MPC8XX_HZ == 120000000 -#define CONFIG_SYS_MAMR_PTA 234 -#elif MPC8XX_HZ == 100000000 -#define CONFIG_SYS_MAMR_PTA 195 -#elif MPC8XX_HZ == 80000000 -#define CONFIG_SYS_MAMR_PTA 156 -#elif MPC8XX_HZ == 50000000 -#define CONFIG_SYS_MAMR_PTA 98 -#else -#error Unknown frequency -#endif - - -/* - * For 16 MBit, refresh rates could be 31.3 us - * (= 64 ms / 2K = 125 / quad bursts). - * For a simpler initialization, 15.6 us is used instead. - * - * #define CONFIG_SYS_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks - * #define CONFIG_SYS_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank - */ -#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ - -/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ -#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ - -/* - * MAMR settings for SDRAM - */ - -/* 8 column SDRAM */ -#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* 9 column SDRAM */ -#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -#define CONFIG_LAST_STAGE_INIT /* needed to reset the damn phys */ - -/*********************************************************************************************************** - - Pin definitions: - - +------+----------------+--------+------------------------------------------------------------ - | # | Name | Type | Comment - +------+----------------+--------+------------------------------------------------------------ - | PA3 | OK_ETH_3V | Input | CISCO Ethernet power OK - | | | | (NetRoute: FEC1, TA: FEC2) (0=power OK) - | PA6 | P_VCCD1 | Output | TPS2211A PCMCIA - | PA7 | DCL1_3V | Periph | IDL1 PCM clock - | PA8 | DSP_DR1 | Periph | IDL1 PCM Data Rx - | PA9 | L1TXDA | Periph | IDL1 PCM Data Tx - | PA10 | P_VCCD0 | Output | TPS2211A PCMCIA - | PA12 | P_SHDN | Output | TPS2211A PCMCIA - | PA13 | ETH_LOOP | Output | CISCO Loopback remote power - | | | | (NetRoute: FEC1, TA: FEC2) (1=NORMAL) - | PA14 | P_VPPD0 | Output | TPS2211A PCMCIA - | PA15 | P_VPPD1 | Output | TPS2211A PCMCIA - | PB14 | SPIEN_FXO | Output | SPI CS for FXO daughter-board - | PB15 | SPIEN_S1 | Output | SPI CS for S-interface 1 (NetRoute only) - | PB16 | DREQ1 | Output | D channel request for S-interface chip 1. - | PB17 | L1ST3 | Periph | IDL1 timeslot enable signal for PPC - | PB18 | L1ST2 | Periph | IDL1 timeslot enable signal for PPC - | PB19 | SPIEN_S2 | Output | SPI CS for S-interface 2 (NetRoute only) - | PB20 | SPIEN_SEEPROM | Output | SPI CS for serial eeprom - | PB21 | LEDIO | Output | Led mode indication for PHY - | PB22 | UART_CTS | Input | UART CTS - | PB23 | UART_RTS | Output | UART RTS - | PB24 | UART_RX | Periph | UART Data Rx - | PB25 | UART_TX | Periph | UART Data Tx - | PB26 | RMII-MDC | Periph | Free for future use (MII mgt clock) - | PB27 | RMII-MDIO | Periph | Free for future use (MII mgt data) - | PB28 | SPI_RXD_3V | Input | SPI Data Rx - | PB29 | SPI_TXD | Output | SPI Data Tx - | PB30 | SPI_CLK | Output | SPI Clock - | PB31 | RMII1-REFCLK | Periph | RMII reference clock for FEC1 - | PC4 | PHY1_LINK | Input | PHY link state FEC1 (interrupt) - | PC5 | PHY2_LINK | Input | PHY link state FEC2 (interrupt) - | PC6 | RMII1-MDINT | Input | PHY prog interrupt FEC1 (interrupt) - | PC7 | RMII2-MDINT | Input | PHY prog interrupt FEC1 (interrupt) - | PC8 | P_OC | Input | TPS2211A PCMCIA overcurrent (interrupt) (1=OK) - | PC9 | COM_HOOK1 | Input | Codec interrupt chip #1 (interrupt) - | PC10 | COM_HOOK2 | Input | Codec interrupt chip #2 (interrupt) - | PC11 | COM_HOOK4 | Input | Codec interrupt chip #4 (interrupt) - | PC12 | COM_HOOK3 | Input | Codec interrupt chip #3 (interrupt) - | PC13 | F_RY_BY | Input | NAND ready signal (interrupt) - | PC14 | FAN_OK | Input | Fan status signal (interrupt) (1=OK) - | PC15 | PC15_DIRECT0 | Periph | PCMCIA DMA request. - | PD3 | F_ALE | Output | NAND - | PD4 | F_CLE | Output | NAND - | PD5 | F_CE | Output | NAND - | PD6 | DSP_INT | Output | DSP debug interrupt - | PD7 | DSP_RESET | Output | DSP reset - | PD8 | RMII_MDC | Periph | MII mgt clock - | PD9 | SPIEN_C1 | Output | SPI CS for codec #1 - | PD10 | SPIEN_C2 | Output | SPI CS for codec #2 - | PD11 | SPIEN_C3 | Output | SPI CS for codec #3 - | PD12 | FSC2 | Periph | IDL2 frame sync - | PD13 | DGRANT2 | Input | D channel grant from S #2 - | PD14 | SPIEN_C4 | Output | SPI CS for codec #4 - | PD15 | TP700 | Output | Testpoint for software debugging - | PE14 | RMII2-TXD0 | Periph | FEC2 transmit data - | PE15 | RMII2-TXD1 | Periph | FEC2 transmit data - | PE16 | RMII2-REFCLK | Periph | TA: RMII ref clock for - | | DCL2 | Periph | NetRoute: PCM clock #2 - | PE17 | TP703 | Output | Testpoint for software debugging - | PE18 | DGRANT1 | Input | D channel grant from S #1 - | PE19 | RMII2-TXEN | Periph | TA: FEC2 tx enable - | | PCM2OUT | Periph | NetRoute: Tx data for IDL2 - | PE20 | FSC1 | Periph | IDL1 frame sync - | PE21 | RMII2-RXD0 | Periph | FEC2 receive data - | PE22 | RMII2-RXD1 | Periph | FEC2 receive data - | PE23 | L1ST1 | Periph | IDL1 timeslot enable signal for PPC - | PE24 | U-N1 | Output | Select user/network for S #1 (0=user) - | PE25 | U-N2 | Output | Select user/network for S #2 (0=user) - | PE26 | RMII2-RXDV | Periph | FEC2 valid - | PE27 | DREQ2 | Output | D channel request for S #2. - | PE28 | FPGA_DONE | Input | FPGA done signal - | PE29 | FPGA_INIT | Output | FPGA init signal - | PE30 | UDOUT2_3V | Input | IDL2 PCM input - | PE31 | | | Free - +------+----------------+--------+--------------------------------------------------- - - Chip selects: - - +------+----------------+------------------------------------------------------------ - | # | Name | Comment - +------+----------------+------------------------------------------------------------ - | CS0 | CS0 | Boot flash - | CS1 | CS_FLASH | NAND flash - | CS2 | CS_DSP | DSP - | CS3 | DCS_DRAM | DRAM - | CS4 | CS_ER1 | External output register - +------+----------------+------------------------------------------------------------ - - Interrupts: - - +------+----------------+------------------------------------------------------------ - | # | Name | Comment - +------+----------------+------------------------------------------------------------ - | IRQ1 | UINTER_3V | S interrupt chips interrupt (common) - | IRQ3 | IRQ_DSP | DSP interrupt - | IRQ4 | IRQ_DSP1 | Extra DSP interrupt - +------+----------------+------------------------------------------------------------ - -*************************************************************************************************/ - -#define DSP_SIZE 0x00010000 /* 64K */ -#define NAND_SIZE 0x00010000 /* 64K */ -#define ER_SIZE 0x00010000 /* 64K */ -#define DUMMY_SIZE 0x00010000 /* 64K */ - -#define DSP_BASE 0xF1000000 -#define NAND_BASE 0xF1010000 -#define ER_BASE 0xF1020000 -#define DUMMY_BASE 0xF1FF0000 - -/*****************************************************************************/ - -#define CONFIG_SYS_DIRECT_FLASH_TFTP -#define CONFIG_SYS_DIRECT_NAND_TFTP - -/*****************************************************************************/ - -#if 1 -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - */ - -#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) -#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) -#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) -#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) - -/*----------------------------------------------------------------------- - * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) - *----------------------------------------------------------------------- - */ - -#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ -#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ -#undef CONFIG_IDE_RESET /* reset for ide not supported */ - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 - -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION -#endif - -/*************************************************************************************************/ - -#define CONFIG_CDP_DEVICE_ID 20 -#define CONFIG_CDP_DEVICE_ID_PREFIX "NT" /* netta */ -#define CONFIG_CDP_PORT_ID "eth%d" -#define CONFIG_CDP_CAPABILITIES 0x00000010 -#define CONFIG_CDP_VERSION "u-boot 1.0" " " U_BOOT_DATE " " U_BOOT_TIME -#define CONFIG_CDP_PLATFORM "Intracom NetTA" -#define CONFIG_CDP_TRIGGER 0x20020001 -#define CONFIG_CDP_POWER_CONSUMPTION 4300 /* 90 mA @ 48V */ -#define CONFIG_CDP_APPLIANCE_VLAN_TYPE 0x01 /* ipphone? */ - -/*************************************************************************************************/ - -#define CONFIG_AUTO_COMPLETE 1 - -/*************************************************************************************************/ - -#define CONFIG_CRC32_VERIFY 1 - -/*************************************************************************************************/ - -#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE 1 - -/*************************************************************************************************/ - -#endif /* __CONFIG_H */ diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h deleted file mode 100644 index 55ae4b5..0000000 --- a/include/configs/NETTA2.h +++ /dev/null @@ -1,654 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Pantelis Antoniou, Intracom S.A., panto@intracom.gr - * U-Boot port on NetTA4 board - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#if !defined(CONFIG_NETTA2_VERSION) || CONFIG_NETTA2_VERSION > 2 -#error Unsupported CONFIG_NETTA2 version -#endif - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC870 1 /* This is a MPC885 CPU */ -#define CONFIG_NETTA2 1 /* ...on a NetTA2 board */ - -#define CONFIG_SYS_TEXT_BASE 0x40000000 - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE - -#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ - -/* #define CONFIG_XIN 10000000 */ -#define CONFIG_XIN 50000000 -/* #define MPC8XX_HZ 120000000 */ -#define MPC8XX_HZ 66666666 - -#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ - -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#undef CONFIG_CLOCKS_IN_MHZ /* clocks NOT passsed to Linux in MHz */ - -#define CONFIG_PREBOOT "echo;" - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "tftpboot; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -#define CONFIG_SOURCE -#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ - -#define CONFIG_STATUS_LED 1 /* Status LED enabled */ -#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_NISDOMAIN - - -#undef CONFIG_MAC_PARTITION -#undef CONFIG_DOS_PARTITION - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - -#define FEC_ENET 1 /* eth.c needs it that way... */ -#undef CONFIG_SYS_DISCOVER_PHY -#define CONFIG_MII 1 -#define CONFIG_MII_INIT 1 -#define CONFIG_RMII 1 /* use RMII interface */ - -#define CONFIG_ETHER_ON_FEC1 1 -#define CONFIG_FEC1_PHY 8 /* phy address of FEC */ -#define CONFIG_FEC1_PHY_NORXERR 1 - -#define CONFIG_ETHER_ON_FEC2 1 -#define CONFIG_FEC2_PHY 4 -#define CONFIG_FEC2_PHY_NORXERR 1 - -#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */ - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_MII -#define CONFIG_CMD_CDP - - -#define CONFIG_BOARD_EARLY_INIT_F 1 -#define CONFIG_MISC_INIT_R - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#define CONFIG_SYS_HUSH_PARSER 1 - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0300000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFF000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x40000000 -#if defined(DEBUG) -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#endif -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#if CONFIG_NETTA2_VERSION == 2 -#define CONFIG_SYS_FLASH_BASE4 0x40080000 -#endif - -#define CONFIG_SYS_RESET_ADDRESS 0x80000000 - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#if CONFIG_NETTA2_VERSION == 1 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#elif CONFIG_NETTA2_VERSION == 2 -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#endif -#define CONFIG_SYS_MAX_FLASH_SECT 8 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE 0x10000 - -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x60000) -#define CONFIG_ENV_OFFSET 0 -#define CONFIG_ENV_SIZE 0x4000 - -#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + 0x70000) -#define CONFIG_ENV_OFFSET_REDUND 0 -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#ifndef CONFIG_CAN_DRIVER -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC) -#else /* we must activate GPL5 in the SIUMCR for CAN */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC) -#endif /* CONFIG_CAN_DRIVER */ - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - * - */ - -#if CONFIG_XIN == 10000000 - -#if MPC8XX_HZ == 120000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 100000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 50000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 25000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 40000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 75000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#else -#error unsupported CPU freq for XIN = 10MHz -#endif - -#elif CONFIG_XIN == 50000000 - -#if MPC8XX_HZ == 120000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 100000000 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#elif MPC8XX_HZ == 66666666 -#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \ - (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \ - PLPRCR_TEXPS) -#else -#error unsupported CPU freq for XIN = 50MHz -#endif - -#else - -#error unsupported XIN freq -#endif - - -/* - *----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - * - * Note: When TBS == 0 the timebase is independent of current cpu clock. - */ - -#define SCCR_MASK SCCR_EBDF11 -#if MPC8XX_HZ > 66666666 -#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00 | SCCR_EBDF01) -#else -#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00) -#endif - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -/*#define CONFIG_SYS_DER 0x2002000F*/ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ - -/* used to re-map FLASH both when starting from SRAM or FLASH: - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ - -/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX) - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V ) - -#if CONFIG_NETTA2_VERSION == 2 - -#define FLASH_BASE4_PRELIM 0x40080000 /* FLASH bank #1 */ - -#define CONFIG_SYS_OR4_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR4_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR4_PRELIM ((FLASH_BASE4_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V ) - -#endif - -/* - * BR3 and OR3 (SDRAM) - * - */ -#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank #0 */ -#define SDRAM_MAX_SIZE (256 << 20) /* max 256MB per bank */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ -#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM | OR_G5LS) - -#define CONFIG_SYS_OR3_PRELIM ((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM) -#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V) - -/* - * Memory Periodic Timer Prescaler - */ - -/* - * Memory Periodic Timer Prescaler - * - * The Divider for PTA (refresh timer) configuration is based on an - * example SDRAM configuration (64 MBit, one bank). The adjustment to - * the number of chip selects (NCS) and the actually needed refresh - * rate is done by setting MPTPR. - * - * PTA is calculated from - * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS) - * - * gclk CPU clock (not bus clock!) - * Trefresh Refresh cycle * 4 (four word bursts used) - * - * 4096 Rows from SDRAM example configuration - * 1000 factor s -> ms - * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration - * 4 Number of refresh cycles per period - * 64 Refresh cycle in ms per number of rows - * -------------------------------------------- - * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000 - * - * 50 MHz => 50.000.000 / Divider = 98 - * 66 Mhz => 66.000.000 / Divider = 129 - * 80 Mhz => 80.000.000 / Divider = 156 - */ - -#define CONFIG_SYS_MAMR_PTA 234 - -/* - * For 16 MBit, refresh rates could be 31.3 us - * (= 64 ms / 2K = 125 / quad bursts). - * For a simpler initialization, 15.6 us is used instead. - * - * #define CONFIG_SYS_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks - * #define CONFIG_SYS_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank - */ -#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ - -/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ -#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ - -/* - * MAMR settings for SDRAM - */ - -/* 8 column SDRAM */ -#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* 9 column SDRAM */ -#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -#define CONFIG_LAST_STAGE_INIT /* needed to reset the damn phys */ - -/****************************************************************/ - -#define DSP_SIZE 0x00010000 /* 64K */ -#define NAND_SIZE 0x00010000 /* 64K */ - -#define DSP_BASE 0xF1000000 -#define NAND_BASE 0xF1010000 - -/*****************************************************************************/ - -#define CONFIG_SYS_DIRECT_FLASH_TFTP - -/*****************************************************************************/ - -#if CONFIG_NETTA2_VERSION == 1 -#define STATUS_LED_BIT 0x00000008 /* bit 28 */ -#elif CONFIG_NETTA2_VERSION == 2 -#define STATUS_LED_BIT 0x00000080 /* bit 24 */ -#endif - -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -#define STATUS_LED_STATE STATUS_LED_BLINKING - -#define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */ -#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ - -#ifndef __ASSEMBLY__ - -/* LEDs */ - -/* led_id_t is unsigned int mask */ -typedef unsigned int led_id_t; - -#define __led_toggle(_msk) \ - do { \ - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat ^= (_msk); \ - } while(0) - -#define __led_set(_msk, _st) \ - do { \ - if ((_st)) \ - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat |= (_msk); \ - else \ - ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat &= ~(_msk); \ - } while(0) - -#define __led_init(msk, st) __led_set(msk, st) - -#endif - -/*********************************************************************************************************** - - ---------------------------------------------------------------------------------------------- - - (V1) version 1 of the board - (V2) version 2 of the board - - ---------------------------------------------------------------------------------------------- - - Pin definitions: - - +------+----------------+--------+------------------------------------------------------------ - | # | Name | Type | Comment - +------+----------------+--------+------------------------------------------------------------ - | PA3 | SPIEN_MAX | Output | MAX serial to uart chip select - | PA7 | DSP_INT | Output | DSP interrupt - | PA10 | DSP_RESET | Output | DSP reset - | PA14 | USBOE | Output | USB (1) - | PA15 | USBRXD | Output | USB (1) - | PB19 | BT_RTS | Output | Bluetooth (0) - | PB23 | BT_CTS | Output | Bluetooth (0) - | PB26 | SPIEN_SEP | Output | Serial EEPROM chip select - | PB27 | SPICS_DISP | Output | Display chip select - | PB28 | SPI_RXD_3V | Input | SPI Data Rx - | PB29 | SPI_TXD | Output | SPI Data Tx - | PB30 | SPI_CLK | Output | SPI Clock - | PC10 | DISPA0 | Output | Display A0 - | PC11 | BACKLIGHT | Output | Display backlit - | PC12 | SPI2RXD | Input | (V1) 2nd SPI RXD - | | IO_RESET | Output | (V2) General I/O reset - | PC13 | SPI2TXD | Output | (V1) 2nd SPI TXD (V1) - | | HOOK | Input | (V2) Hook input interrupt - | PC15 | SPI2CLK | Output | (V1) 2nd SPI CLK - | | F_RY_BY | Input | (V2) NAND F_RY_BY - | PE17 | F_ALE | Output | NAND F_ALE - | PE18 | F_CLE | Output | NAND F_CLE - | PE20 | F_CE | Output | NAND F_CE - | PE24 | SPICS_SCOUT | Output | (V1) Codec chip select - | | LED | Output | (V2) LED - | PE27 | SPICS_ER | Output | External serial register CS - | PE28 | LEDIO1 | Output | (V1) LED - | | BKBR1 | Input | (V2) Keyboard input scan - | PE29 | LEDIO2 | Output | (V1) LED hook for A (TA2) - | | BKBR2 | Input | (V2) Keyboard input scan - | PE30 | LEDIO3 | Output | (V1) LED hook for A (TA2) - | | BKBR3 | Input | (V2) Keyboard input scan - | PE31 | F_RY_BY | Input | (V1) NAND F_RY_BY - | | BKBR4 | Input | (V2) Keyboard input scan - +------+----------------+--------+--------------------------------------------------- - - ---------------------------------------------------------------------------------------------- - - Serial register input: - - +------+----------------+------------------------------------------------------------ - | # | Name | Comment - +------+----------------+------------------------------------------------------------ - | 4 | HOOK | Hook switch - | 5 | BT_LINK | Bluetooth link status - | 6 | HOST_WAKE | Bluetooth host wake up - | 7 | OK_ETH | Cisco inline power OK status - +------+----------------+------------------------------------------------------------ - - ---------------------------------------------------------------------------------------------- - - Chip selects: - - +------+----------------+------------------------------------------------------------ - | # | Name | Comment - +------+----------------+------------------------------------------------------------ - | CS0 | CS0 | Boot flash - | CS1 | CS_FLASH | NAND flash - | CS2 | CS_DSP | DSP - | CS3 | DCS_DRAM | DRAM - | CS4 | CS_FLASH2 | (V2) 2nd flash - +------+----------------+------------------------------------------------------------ - - ---------------------------------------------------------------------------------------------- - - Interrupts: - - +------+----------------+------------------------------------------------------------ - | # | Name | Comment - +------+----------------+------------------------------------------------------------ - | IRQ1 | IRQ_DSP | DSP interrupt - | IRQ3 | S_INTER | DUSLIC ??? - | IRQ4 | F_RY_BY | NAND - | IRQ7 | IRQ_MAX | MAX 3100 interrupt - +------+----------------+------------------------------------------------------------ - - ---------------------------------------------------------------------------------------------- - - Interrupts on PCMCIA pins: - - +------+----------------+------------------------------------------------------------ - | # | Name | Comment - +------+----------------+------------------------------------------------------------ - | IP_A0| PHY1_LINK | Link status changed for #1 Ethernet interface - | IP_A1| PHY2_LINK | Link status changed for #2 Ethernet interface - | IP_A2| RMII1_MDINT | PHY interrupt for #1 - | IP_A3| RMII2_MDINT | PHY interrupt for #2 - | IP_A5| HOST_WAKE | (V2) Bluetooth host wake - | IP_A6| OK_ETH | (V2) Cisco inline power OK - +------+----------------+------------------------------------------------------------ - -**************************************************************************************************/ - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1 -#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE 1 - -/*************************************************************************************************/ - -/* use board specific hardware */ -#undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_HW_WATCHDOG - -/*************************************************************************************************/ - -#define CONFIG_CDP_DEVICE_ID 20 -#define CONFIG_CDP_DEVICE_ID_PREFIX "NT" /* netta2 */ -#define CONFIG_CDP_PORT_ID "eth%d" -#define CONFIG_CDP_CAPABILITIES 0x00000010 -#define CONFIG_CDP_VERSION "u-boot" " " U_BOOT_DATE " " U_BOOT_TIME -#define CONFIG_CDP_PLATFORM "Intracom NetTA2" -#define CONFIG_CDP_TRIGGER 0x20020001 -#define CONFIG_CDP_POWER_CONSUMPTION 4300 /* 90 mA @ 48V */ -#define CONFIG_CDP_APPLIANCE_VLAN_TYPE 0x01 /* ipphone ? */ - -/*************************************************************************************************/ - -#define CONFIG_AUTO_COMPLETE 1 - -/*************************************************************************************************/ - -#define CONFIG_CRC32_VERIFY 1 - -/*************************************************************************************************/ - -#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE 1 - -/*************************************************************************************************/ -#endif /* __CONFIG_H */ diff --git a/include/pcmcia.h b/include/pcmcia.h index b0f6b92..b1f325b 100644 --- a/include/pcmcia.h +++ b/include/pcmcia.h @@ -41,8 +41,6 @@ # define CONFIG_PCMCIA_SLOT_B #elif defined(CONFIG_ATC) /* The ATC use SLOT_A */ # define CONFIG_PCMCIA_SLOT_A -#elif defined(CONFIG_NETTA) -# define CONFIG_PCMCIA_SLOT_A #elif defined(CONFIG_UC100) /* The UC100 use SLOT_B */ # define CONFIG_PCMCIA_SLOT_B #else diff --git a/include/status_led.h b/include/status_led.h index 61eb66a..0eb91b8 100644 --- a/include/status_led.h +++ b/include/status_led.h @@ -231,9 +231,6 @@ void status_led_set (int led, int state); # define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ -/***** NetPhone ********************************************************/ -#elif defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2) -/* XXX empty just to avoid the error */ /***** STx XTc ********************************************************/ #elif defined(CONFIG_STXXTC) /* XXX empty just to avoid the error */ -- cgit v0.10.2