From 709b384b6493d9726dce20663ebe31bf7cab2925 Mon Sep 17 00:00:00 2001 From: TsiChung Liew Date: Thu, 11 Jun 2009 15:39:57 +0000 Subject: ColdFire: Update for M54451EVB Update serial boot DRAM's Internal RAM, vector table and DRAM in start.S, serial flash's read status command over SPI and NOR flash. Signed-off-by: TsiChung Liew diff --git a/Makefile b/Makefile index 090e645..0314844 100644 --- a/Makefile +++ b/Makefile @@ -2108,18 +2108,15 @@ M5373EVB_config : unconfig @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale M54451EVB_config \ -M54451EVB_spansion_config \ M54451EVB_stmicro_config : unconfig @case "$@" in \ - M54451EVB_config) FLASH=SPANSION;; \ - M54451EVB_spansion_config) FLASH=SPANSION;; \ + M54451EVB_config) FLASH=NOR;; \ M54451EVB_stmicro_config) FLASH=STMICRO;; \ esac; \ - if [ "$${FLASH}" = "SPANSION" ] ; then \ - echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \ + if [ "$${FLASH}" = "NOR" ] ; then \ echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \ cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \ - $(XECHO) "... with SPANSION boot..." ; \ + $(XECHO) "... with NOR boot..." ; \ fi; \ if [ "$${FLASH}" = "STMICRO" ] ; then \ echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ diff --git a/board/freescale/m54451evb/u-boot.spa b/board/freescale/m54451evb/u-boot.spa index 08e184c..d8caefa 100644 --- a/board/freescale/m54451evb/u-boot.spa +++ b/board/freescale/m54451evb/u-boot.spa @@ -56,10 +56,13 @@ SECTIONS /* the sector layout of our flash chips! XXX FIXME XXX */ cpu/mcf5445x/start.o (.text) - lib_m68k/traps.o (.text) - lib_m68k/interrupts.o (.text) + cpu/mcf5445x/libmcf5445x.a (.text) + lib_m68k/libm68k.a (.text) + common/cmd_flash.o (.text) common/dlmalloc.o (.text) - lib_generic/zlib.o (.text) + common/main.o (.text) + common/image.o (.text) + lib_generic/libgeneric.a (.text) . = DEFINED(env_offset) ? env_offset : .; common/env_embedded.o (.text) diff --git a/cpu/mcf5445x/dspi.c b/cpu/mcf5445x/dspi.c index 6d3ebab..59133e8 100644 --- a/cpu/mcf5445x/dspi.c +++ b/cpu/mcf5445x/dspi.c @@ -159,12 +159,10 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, dspi_rx(); return 0; case 0x05: /* Read Status */ - if (len == 4) - if ((spi_wr[1] == 0xFF) && (spi_wr[2] == 0xFF) - && (spi_wr[3] == 0xFF)) { - dspi_tx(slave->cs, 0x80, *spi_wr); - dspi_rx(); - } + if (len == 1) { + dspi_tx(slave->cs, 0x80, *spi_wr); + dspi_rx(); + } return 0; case 0x06: /* WREN */ dspi_tx(slave->cs, 0x00, *spi_wr); diff --git a/cpu/mcf5445x/start.S b/cpu/mcf5445x/start.S index 26fb2ce..c156bab 100644 --- a/cpu/mcf5445x/start.S +++ b/cpu/mcf5445x/start.S @@ -149,9 +149,35 @@ asm_sbf_img_hdr: .long 0x00030000 /* image length */ .long TEXT_BASE /* image to be relocated at */ + + asm_dram_init: + move.w #0x2700,%sr /* Mask off Interrupt */ + + move.l #CONFIG_SYS_INIT_RAM_ADDR, %d0 + movec %d0, %VBR + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 - movec %d0, %RAMBAR1 /* init Rambar */ + movec %d0, %RAMBAR1 + + /* initialize general use internal ram */ + move.l #0, %d0 + move.l #(CACR_STATUS), %a1 /* CACR */ + move.l #(ICACHE_STATUS), %a2 /* icache */ + move.l #(DCACHE_STATUS), %a3 /* dcache */ + move.l %d0, (%a1) + move.l %d0, (%a2) + move.l %d0, (%a3) + + /* invalidate and disable cache */ + move.l #0x01004100, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + move.l #0, %d0 + movec %d0, %ACR0 + movec %d0, %ACR1 + movec %d0, %ACR2 + movec %d0, %ACR3 + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp clr.l %sp@- @@ -163,10 +189,7 @@ asm_dram_init: move.l #0xFC008004, %a1 move.l #(CONFIG_SYS_CS0_MASK), (%a1) - /* - * Dram Initialization - * a1, a2, and d0 - */ + /* Dram Initialization a1, a2, and d0 */ /* mscr sdram */ move.l #0xFC0A4074, %a1 move.b #(CONFIG_SYS_SDRAM_DRV_STRENGTH), (%a1) @@ -209,24 +232,21 @@ dramsz_loop: move.l #0xFC0B8000, %a1 /* Mode */ move.l #0xFC0B8004, %a2 /* Ctrl */ -#ifdef CONFIG_M54455EVB /* Issue PALL */ move.l #(CONFIG_SYS_SDRAM_CTRL + 2), (%a2) nop +#ifdef CONFIG_M54455EVB /* Issue LEMR */ move.l #(CONFIG_SYS_SDRAM_EMOD + 0x408), (%a1) nop move.l #(CONFIG_SYS_SDRAM_MODE + 0x300), (%a1) nop - - move.l #1000, %d0 -wait1000: - nop - subq.l #1, %d0 - bne wait1000 #endif + move.l #1000, %d1 + jsr asm_delay + /* Issue PALL */ move.l #(CONFIG_SYS_SDRAM_CTRL + 2), (%a2) nop @@ -246,25 +266,24 @@ wait1000: move.l #(CONFIG_SYS_SDRAM_MODE), (%a1) nop move.l #(CONFIG_SYS_SDRAM_EMOD), (%a1) - nop #endif - move.l #500, %d0 -wait500: - nop - subq.l #1, %d0 - bne wait500 + move.l #500, %d1 + jsr asm_delay - move.l #(CONFIG_SYS_SDRAM_CTRL), %d0 - and.l #0x7FFFFFFF, %d0 + move.l #(CONFIG_SYS_SDRAM_CTRL), %d1 + and.l #0x7FFFFFFF, %d1 #ifdef CONFIG_M54455EVB - or.l #0x10000c00, %d0 + or.l #0x10000C00, %d1 #elif defined(CONFIG_M54451EVB) - or.l #0x10000000, %d0 + or.l #0x10000C00, %d1 #endif - move.l %d0, (%a2) + move.l %d1, (%a2) nop + move.l #2000, %d1 + jsr asm_delay + /* * DSPI Initialization * a0 - general, sram - 0x80008000 - 32, see M54455EVB.h @@ -274,6 +293,7 @@ wait500: * a4 - Dst addr */ /* Enable pins for DSPI mode - chip-selects are enabled later */ +asm_dspi_init: move.l #0xFC0A4063, %a0 move.b #0x7F, (%a0) @@ -367,27 +387,29 @@ asm_dspi_rd_status: move.b (%a3), %d1 rts + +asm_delay: + nop + subq.l #1, %d1 + bne asm_delay + rts #endif /* CONFIG_CF_SBF */ .text . = 0x400 .globl _start _start: +#if !defined(CONFIG_CF_SBF) nop nop move.w #0x2700,%sr /* Mask off Interrupt */ /* Set vector base register at the beginning of the Flash */ -#if defined(CONFIG_CF_SBF) - move.l #TEXT_BASE, %d0 - movec %d0, %VBR -#else move.l #CONFIG_SYS_FLASH_BASE, %d0 movec %d0, %VBR move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 movec %d0, %RAMBAR1 -#endif /* initialize general use internal ram */ move.l #0, %d0 @@ -411,6 +433,7 @@ _start: the first c-code */ move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp clr.l %sp@- +#endif move.l #__got_start, %a5 /* put relocation table address to a5 */ @@ -532,7 +555,7 @@ icache_enable: move.l #0x00040100, %d0 /* Invalidate icache */ movec %d0, %CACR - move.l #(CONFIG_SYS_SDRAM_BASE + 0x1c000), %d0 /* Setup icache */ + move.l #(CONFIG_SYS_SDRAM_BASE + 0xC000), %d0 /* Setup icache */ movec %d0, %ACR2 move.l #0x04088020, %d0 /* Enable bcache and icache */ diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h index 45f7016..cc57da8 100644 --- a/include/configs/M54451EVB.h +++ b/include/configs/M54451EVB.h @@ -70,6 +70,7 @@ #define CONFIG_CMD_MISC #define CONFIG_CMD_MII #define CONFIG_CMD_NET +#define CONFIG_CMD_NFS #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #define CONFIG_CMD_SPI @@ -163,7 +164,7 @@ #define CONFIG_SYS_I2C_SPEED 80000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F #define CONFIG_SYS_I2C_OFFSET 0x58000 -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR +#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR /* DSPI and Serial Flash */ #define CONFIG_CF_DSPI @@ -175,7 +176,7 @@ # define CONFIG_SPI_FLASH # define CONFIG_SPI_FLASH_STMICRO -# define CONFIG_SYS_DSPI_DCTAR0 (DSPI_DCTAR_TRSZ(7) | \ +# define CONFIG_SYS_DSPI_DCTAR0 (DSPI_DCTAR_TRSZ(7) | \ DSPI_DCTAR_CPOL | \ DSPI_DCTAR_CPHA | \ DSPI_DCTAR_PCSSCK_1CLK | \ @@ -191,7 +192,7 @@ /* Input, PCI, Flexbus, and VCO */ #define CONFIG_EXTRA_CLOCK -#define CONFIG_PRAM 2048 /* 2048 KB */ +#define CONFIG_PRAM 2048 /* 2048 KB */ #define CONFIG_SYS_PROMPT "-> " #define CONFIG_SYS_LONGHELP /* undef to save memory */ @@ -209,7 +210,7 @@ #define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_MBAR 0xFC000000 +#define CONFIG_SYS_MBAR 0xFC000000 /* * Low Level Configuration Settings @@ -265,7 +266,7 @@ /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash */ -#if defined(CONFIG_CF_SBF) +#if defined(CONFIG_SYS_STMICRO_BOOT) # define CONFIG_ENV_IS_IN_SPI_FLASH 1 # define CONFIG_ENV_SPI_CS 1 # define CONFIG_ENV_OFFSET 0x20000 @@ -273,8 +274,9 @@ # define CONFIG_ENV_SECT_SIZE 0x10000 #else # define CONFIG_ENV_IS_IN_FLASH 1 -# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x4000) -# define CONFIG_ENV_SECT_SIZE 0x2000 +# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x8000) +# define CONFIG_ENV_SIZE 0x2000 +# define CONFIG_ENV_SECT_SIZE 0x8000 #endif #undef CONFIG_ENV_OVERWRITE #undef CONFIG_ENV_IS_EMBEDDED @@ -286,8 +288,7 @@ # define CONFIG_SYS_FLASH_BASE CONFIG_SYS_SER_FLASH_BASE # define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_SER_FLASH_BASE # define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_CS0_BASE -#endif -#ifdef CONFIG_SYS_SPANSION_BOOT +#else # define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE # define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE # define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_SER_FLASH_BASE @@ -297,6 +298,7 @@ #ifdef CONFIG_SYS_FLASH_CFI # define CONFIG_FLASH_CFI_DRIVER 1 +# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 # define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ # define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT # define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ @@ -311,27 +313,20 @@ * This is setting for JFFS2 support in u-boot. * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. */ -#ifdef CONFIG_SYS_SPANSION_BOOT -# define CONFIG_JFFS2_DEV "nor0" -# define CONFIG_JFFS2_PART_SIZE 0x01000000 -# define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x500000) -#endif -#ifdef CONFIG_SYS_STMICRO_BOOT +#ifdef CONFIG_CMD_JFFS2 # define CONFIG_JFFS2_DEV "nor0" # define CONFIG_JFFS2_PART_SIZE 0x01000000 # define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x500000) #endif -/*----------------------------------------------------------------------- - * Cache Configuration - */ +/* Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16 /*----------------------------------------------------------------------- * Memory bank definitions */ /* - * CS0 - NOR Flash 8MB + * CS0 - NOR Flash 16MB * CS1 - Available * CS2 - Available * CS3 - Available @@ -339,10 +334,10 @@ * CS5 - Available */ - /* SPANSION Flash */ + /* Flash */ #define CONFIG_SYS_CS0_BASE 0x00000000 -#define CONFIG_SYS_CS0_MASK 0x007F0001 -#define CONFIG_SYS_CS0_CTRL 0x00001180 +#define CONFIG_SYS_CS0_MASK 0x00FF0001 +#define CONFIG_SYS_CS0_CTRL 0x00004D80 #define CONFIG_SYS_SPANSION_BASE CONFIG_SYS_CS0_BASE -- cgit v0.10.2