From eae08eb2b53ffb87f3342e45ab422d8625659fcd Mon Sep 17 00:00:00 2001
From: Fabio Estevam <fabio.estevam@freescale.com>
Date: Tue, 29 May 2012 05:54:39 +0000
Subject: mx53loco: Fix revision of Dialog boards

Original code was assuming that the fuse revision version for all mx53loco boards
based on Dialog PMIC was the same, which is not the case.

Force the revision of all Dialog-based boards to 0.

This fixes a kernel crash when PMIC is accessed in the 2.6.35 kernel
for Dialog rev E boards.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
index d8e027c..cbdcfad 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -75,6 +75,9 @@ u32 get_board_rev(void)
 
 	int rev = readl(&fuse->gp[6]);
 
+	if (!i2c_probe(CONFIG_SYS_DIALOG_PMIC_I2C_ADDR))
+		rev = 0;
+
 	return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
 }
 
@@ -495,11 +498,6 @@ int print_cpuinfo(void)
 #ifdef CONFIG_BOARD_LATE_INIT
 int board_late_init(void)
 {
-	setup_iomux_i2c();
-	if (!power_init())
-		clock_1GHz();
-	print_cpuinfo();
-
 	setenv("stdout", "serial");
 
 	return 0;
@@ -511,6 +509,10 @@ int board_init(void)
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
 
 	mxc_set_sata_internal_clock();
+	setup_iomux_i2c();
+	if (!power_init())
+		clock_1GHz();
+	print_cpuinfo();
 
 	lcd_enable();
 
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 8b4e008..b63d37d 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -41,7 +41,6 @@
 #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
 
 #define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_MXC_GPIO
 #define CONFIG_REVISION_TAG
 
-- 
cgit v0.10.2