From b87dfd2854809ddcf4be54d772752e7ed137386f Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 19 Jul 2006 13:50:38 +0200 Subject: Add support for TB5200 board The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module integrated in a little aluminium case. Patch by Martin Krause, 8 Jun 2006 Some code cleanup diff --git a/CHANGELOG b/CHANGELOG index fb88164..3e6b1f9 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,11 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Add support for TB5200 board + The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module + integrated in a little aluminium case. + Patch by Martin Krause, 8 Jun 2006 + * Enable buffered flash writes for TQM5200 board. * Fix problems with SanDisk Corporation Cruzer Micro USB memory stick. @@ -18,7 +23,7 @@ Changes since U-Boot 1.1.4: * Add support for SPC1920 board. Patch by Markus Klotzbuecher, 12 Jul 2006 - + * MCC200 board: support console on any one of the Quad UART ports. * Fix error in flash protection calculation on MCC200 board. @@ -60,14 +65,14 @@ Changes since U-Boot 1.1.4: * VoiceBlue update: use new MTD flash partitioning methods, use more reasonable TEXT_BASE, update default environment and enable keyed autoboot. - Patch by Ladislav Michl, 16. Aug 2005 + Patch by Ladislav Michl, 16. Aug 2005 * Add forgotten changes for the PLEB 2 Board. Patch by David Snowdon, 13. Aug 2005 * Add support for wrPPMC7xx/74xx boards Patch by Richard Danter, 12 Aug 2005 - + * Add support for gth2 board Patch by Thomas Lange, Aug 11 2005 @@ -89,7 +94,7 @@ Changes since U-Boot 1.1.4: With this fix pin I2CSCL (PG6) is really configured as GPIO so the clock pulses are really generated. Patch by Martin Krause, 04 Apr 2006 - + * Fix DDR6 errata on TQM834x boards Patch by Thomas Waehner, 07 Mar 2006 @@ -106,7 +111,7 @@ Changes since U-Boot 1.1.4: has been programmed. Jumper Settings: X66 1-2, 9-10; X61 2-3 * Fix TRAB channel switching delay for trab_fkt.bin standalone applikation - In tsc2000_read_channel() the delay after setting the multiplexer + In tsc2000_read_channel() the delay after setting the multiplexer to a temperature channel is increased from 1,5 ms to 10 ms. This is to allow the multiplexer inputs to stabilize after huge steps of the input signal level. diff --git a/Makefile b/Makefile index 63f2175..5a42d53 100644 --- a/Makefile +++ b/Makefile @@ -360,6 +360,11 @@ spieval_config: unconfig @echo "... with automatic CS configuration" @./mkconfig -a spieval ppc mpc5xxx tqm5200 +TB5200_config: unconfig + @echo "#define CONFIG_CS_AUTOCONF">>include/config.h + @echo "... with automatic CS configuration" + @./mkconfig -a TB5200 ppc mpc5xxx tqm5200 + MINI5200_config \ EVAL5200_config \ TOP5200_config: unconfig @@ -1461,7 +1466,7 @@ ZUMA_config: unconfig ppmc7xx_config: unconfig @./mkconfig $(@:_config=) ppc 74xx_7xx ppmc7xx - + #======================================================================== # ARM #======================================================================== diff --git a/board/amcc/yucca/cmd_yucca.c b/board/amcc/yucca/cmd_yucca.c index 9c7afb2..e698b20 100644 --- a/board/amcc/yucca/cmd_yucca.c +++ b/board/amcc/yucca/cmd_yucca.c @@ -30,7 +30,7 @@ #include extern void print_evb440spe_info(void); -static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, +static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char *argv[]); extern int cmd_get_data_size(char* arg, int default_size); diff --git a/board/amcc/yucca/flash.c b/board/amcc/yucca/flash.c index c5a2e31..15b8a46 100644 --- a/board/amcc/yucca/flash.c +++ b/board/amcc/yucca/flash.c @@ -1004,7 +1004,7 @@ unsigned long flash_init(void) } } /*else if (index == 0) {*/ /* if (in8(FPGA_SETTING_REG) & FPGA_SET_REG_OP_CODE_FLASH_ABOVE)*/ -/* index = 8;*//* sram below op code flash -> new index 8*/ +/* index = 8;*/ /* sram below op code flash -> new index 8*/ /* }*/ DEBUGF("\n"); diff --git a/board/amcc/yucca/init.S b/board/amcc/yucca/init.S index 8cf2636..cb28936 100644 --- a/board/amcc/yucca/init.S +++ b/board/amcc/yucca/init.S @@ -102,4 +102,3 @@ tlbtab: tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I) tlbtab_end - diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c index 1ae3a54..ce1312c 100644 --- a/board/amcc/yucca/yucca.c +++ b/board/amcc/yucca/yucca.c @@ -1094,4 +1094,3 @@ unsigned long ppcMfsdr(unsigned long sdr_reg) return (sdr_value); } - diff --git a/board/gth2/config.mk b/board/gth2/config.mk index 6d21ba1..2bc1338 100644 --- a/board/gth2/config.mk +++ b/board/gth2/config.mk @@ -39,4 +39,3 @@ TEXT_BASE = 0x90000000 endif endif endif - diff --git a/board/gth2/ee_access.c b/board/gth2/ee_access.c index e293139..d4798c4 100644 --- a/board/gth2/ee_access.c +++ b/board/gth2/ee_access.c @@ -8,7 +8,7 @@ For documentaion, see data sheet for DS2438, 2438.pdf By Thomas.Lange@corelatus.com 001025 - + Copyright (C) 2000-2005 Corelatus AB */ /* This program is free software; you can redistribute it and/or @@ -105,7 +105,7 @@ static u8 make_new_crc( u8 Old_crc, u8 New_value ){ /* Compute a new checksum with new byte, using previous checksum as input See DS app note 17, understanding and using cyclic redundancy checks... Also see DS2438, page 11 */ - return( crc_lookup[Old_crc ^ New_value ]); + return( crc_lookup[Old_crc ^ New_value ]); } int ee_crc_ok( u8 *Buffer, int Len, u8 Crc ){ @@ -119,16 +119,16 @@ int ee_crc_ok( u8 *Buffer, int Len, u8 Crc ){ Curr_byte++; } E_DEBUG("Calculated CRC = 0x%x, read = 0x%x\n", Curr_crc, Crc); - + if(Curr_crc == Crc){ - /* Good */ + /* Good */ return(TRUE); } printk(KERN_ERR"EE checksum error, Calculated CRC = 0x%x, read = 0x%x\n", Curr_crc, Crc); return(FALSE); } -static void +static void set_idle(void){ /* Send idle and keep start time Continous 1 is idle */ @@ -136,7 +136,7 @@ set_idle(void){ } -static int +static int do_cpu_reset(void){ /* Release reset and verify that chip responds with presence pulse */ int Retries=0; @@ -146,10 +146,10 @@ do_cpu_reset(void){ /* Send reset */ WRITE_PORT(0); udelay(RESET_LOW_TIME); - + /* Release reset */ WRITE_PORT(1); - + /* Wait for EEPROM to drive output */ udelay(PRESENCE_TIMEOUT); if(!READ_PORT){ @@ -166,17 +166,17 @@ do_cpu_reset(void){ } printk(KERN_ERR"eeprom did not respond when releasing reset\n"); - + /* Make sure chip releases pin */ udelay(PRESENCE_LOW_TIME); /* Set to idle again */ set_idle(); - + return(-EIO); } -static u8 +static u8 read_cpu_byte(void){ /* Read a single byte from EEPROM Read LSb first */ @@ -186,36 +186,36 @@ read_cpu_byte(void){ u32 Flags; E_DEBUG("Reading byte\n"); - + for(i=0;i<8;i++){ /* Small delay between pulses */ udelay(1); -#ifdef __KERNEL__ - /* Disable irq */ +#ifdef __KERNEL__ + /* Disable irq */ save_flags(Flags); cli(); -#endif +#endif /* Pull down pin short time to start read See page 26 in data sheet */ - + WRITE_PORT(0); udelay(READ_LOW); WRITE_PORT(1); - + /* Wait for chip to drive pin */ udelay(READ_TIMEOUT); - + Value = READ_PORT; if(Value) Value=1; #ifdef __KERNEL__ - /* Enable irq */ + /* Enable irq */ restore_flags(Flags); #endif - + /* Wait for chip to release pin */ udelay(TOTAL_READ_LOW-READ_TIMEOUT); @@ -230,30 +230,30 @@ read_cpu_byte(void){ return(Result); } -static void +static void write_cpu_byte(u8 Byte){ /* Write a single byte to EEPROM Write LSb first */ int i; int Value; u32 Flags; - + E_DEBUG("Writing byte 0x%x\n",Byte); - + for(i=0;i<8;i++){ /* Small delay between pulses */ udelay(1); Value = Byte&1; - + #ifdef __KERNEL__ - /* Disable irq */ + /* Disable irq */ save_flags(Flags); cli(); -#endif +#endif /* Pull down pin short time for a 1, long time for a 0 See page 26 in data sheet */ - + WRITE_PORT(0); if(Value){ /* Write a 1 */ @@ -267,54 +267,54 @@ write_cpu_byte(u8 Byte){ WRITE_PORT(1); #ifdef __KERNEL__ - /* Enable irq */ + /* Enable irq */ restore_flags(Flags); #endif if(Value) /* Wait for chip to read the 1 */ udelay(TOTAL_WRITE_LOW-WRITE_1_LOW); - + /* E_DEBUG("Wrote %d\n",Value); */ Byte>>=1; } } int ee_do_cpu_command( u8 *Tx, int Tx_len, u8 *Rx, int Rx_len, int Send_skip ){ - /* Execute this command string, including + /* Execute this command string, including giving reset and setting to idle after command - if Rx_len is set, we read out data from EEPROM */ + if Rx_len is set, we read out data from EEPROM */ int i; E_DEBUG("Command, Tx_len %d, Rx_len %d\n", Tx_len, Rx_len ); - + if(do_cpu_reset()){ /* Failed! */ return(-EIO); } if(Send_skip) - /* Always send SKIP_ROM first to tell chip we are sending a command, + /* Always send SKIP_ROM first to tell chip we are sending a command, except when we read out rom data for chip */ write_cpu_byte(SKIP_ROM); - + /* Always have Tx data */ for(i=0;i> 8; count = data & 0xFF; - if ((system != SYSTEM_BOOT) & - (system != SYSTEM2_BOOT) & + if ((system != SYSTEM_BOOT) & + (system != SYSTEM2_BOOT) & (system != FAILSAFE_BOOT)) { printf ("*** Wrong system %d\n", system); system = FAILSAFE_BOOT; diff --git a/board/gth2/lowlevel_init.S b/board/gth2/lowlevel_init.S index 62e3657..983ff70 100644 --- a/board/gth2/lowlevel_init.S +++ b/board/gth2/lowlevel_init.S @@ -197,11 +197,11 @@ noCacheJump: /* RCE2 CP Altera */ li t0, MEM_STCFG2 - li t1, 0x00000280 /* BE, EW */ + li t1, 0x00000280 /* BE, EW */ sw t1, 0(t0) li t0, MEM_STTIME2 - li t1, 0x0303000c + li t1, 0x0303000c sw t1, 0(t0) li t0, MEM_STADDR2 @@ -210,11 +210,11 @@ noCacheJump: /* RCE3 DP Altera */ li t0, MEM_STCFG3 - li t1, 0x00000280 /* BE, EW */ + li t1, 0x00000280 /* BE, EW */ sw t1, 0(t0) li t0, MEM_STTIME3 - li t1, 0x0303000c + li t1, 0x0303000c sw t1, 0(t0) li t0, MEM_STADDR3 @@ -428,14 +428,14 @@ mt0: sw t0, 0(t0) li t0, 0x80000000 li t1, 0xFFF000 /* 64 MB */ mt1: lw t2, 0(t0) - bne t0, t2, memhang + bne t0, t2, memhang add t1, -1 add t0, 4 bne t1, zero, mt1 nop nop .globl clearmem -clearmem: +clearmem: /* Clear memory */ li t0, 0x80000000 li t1, 0xFFF000 /* 64 MB */ @@ -445,10 +445,10 @@ mtc: sw zero, 0(t0) bne t1, zero, mtc nop nop -memtestend: +memtestend: j ra nop - -memhang: + +memhang: b memhang nop diff --git a/board/ppmc7xx/config.mk b/board/ppmc7xx/config.mk index bcb6c81..d8eac77 100644 --- a/board/ppmc7xx/config.mk +++ b/board/ppmc7xx/config.mk @@ -1,6 +1,6 @@ # # (C) Copyright 2005 -# Richard Danter, Wind River Systems +# Richard Danter, Wind River Systems # # (C) Copyright 2000 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -24,10 +24,6 @@ # MA 02111-1307 USA # -# -# -# - TEXT_BASE = 0xFFF00000 TEXT_END = 0xFFF40000 PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) diff --git a/board/ppmc7xx/flash.c b/board/ppmc7xx/flash.c index 1cbcadc..4be6f13 100644 --- a/board/ppmc7xx/flash.c +++ b/board/ppmc7xx/flash.c @@ -1,10 +1,10 @@ /* * flash.c * ------- - * + * * Flash programming routines for the Wind River PPMC 74xx/7xx * based on flash.c from the TQM8260 board. - * + * * By Richard Danter (richard.danter@windriver.com) * Copyright (C) 2005 Wind River Systems */ @@ -27,13 +27,13 @@ void flash_reset (void) { unsigned long msr; DWORD cmd_reset = 0x00F000F000F000F0LL; - + if (flash_info[0].flash_id != FLASH_UNKNOWN) { msr = get_msr (); set_msr (msr | MSR_FP); write_via_fpu ((DWORD*)flash_info[0].start[0], &cmd_reset ); - + set_msr (msr); } } @@ -50,16 +50,16 @@ ulong flash_get_size (ulong baseaddr, flash_info_t * info) /* Enable FPU */ msr = get_msr (); - set_msr (msr | MSR_FP); - + set_msr (msr | MSR_FP); + /* Write auto-select command sequence */ write_via_fpu ((DWORD*)(baseaddr + (0x0555 << 3)), &cmd_select[0] ); write_via_fpu ((DWORD*)(baseaddr + (0x02AA << 3)), &cmd_select[1] ); write_via_fpu ((DWORD*)(baseaddr + (0x0555 << 3)), &cmd_select[2] ); - + /* Restore FPU */ set_msr (msr); - + /* Read manufacturer ID */ flashtest = *(volatile DWORD*)baseaddr; switch ((int)flashtest) { @@ -70,7 +70,7 @@ ulong flash_get_size (ulong baseaddr, flash_info_t * info) info->flash_id = FLASH_MAN_FUJ; break; default: - /* No, faulty or unknown flash */ + /* No, faulty or unknown flash */ info->flash_id = FLASH_UNKNOWN; info->sector_count = 0; info->size = 0; @@ -291,7 +291,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) DWORD cmd_erase[6] = { 0x00AA00AA00AA00AALL, 0x0055005500550055LL, 0x0080008000800080LL, 0x00AA00AA00AA00AALL, 0x0055005500550055LL, 0x0030003000300030LL }; - + if ((s_first < 0) || (s_first > s_last)) { if (info->flash_id == FLASH_UNKNOWN) { printf ("- missing\n"); @@ -319,7 +319,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) /* Enable FPU */ msr = get_msr(); set_msr ( msr | MSR_FP ); - + /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts (); @@ -344,7 +344,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) /* Restore FPU */ set_msr (msr); - + /* wait at least 80us - let's wait 1 ms */ udelay (1000); @@ -373,7 +373,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) DONE: /* reset to read mode */ flash_reset (); - + printf (" done\n"); return 0; } @@ -446,7 +446,7 @@ static int write_dword (flash_info_t * info, ulong dest, unsigned char *pdata) DWORD data; DWORD cmd_write[3] = { 0x00AA00AA00AA00AALL, 0x0055005500550055LL, 0x00A000A000A000A0LL }; - + for (data = 0, i = 0; i < 8; i++) data = (data << 8) + *pdata++; @@ -454,11 +454,11 @@ static int write_dword (flash_info_t * info, ulong dest, unsigned char *pdata) if ((*(DWORD*)dest & data) != data) { return (2); } - + /* Enable FPU */ msr = get_msr(); set_msr( msr | MSR_FP ); - + /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts (); @@ -473,7 +473,7 @@ static int write_dword (flash_info_t * info, ulong dest, unsigned char *pdata) /* Restore FPU */ set_msr(msr); - + /* data polling for D7 */ start = get_timer (0); while (*(volatile DWORD*)dest != data ) { diff --git a/board/ppmc7xx/init.S b/board/ppmc7xx/init.S index e4ed7a6..99a818a 100644 --- a/board/ppmc7xx/init.S +++ b/board/ppmc7xx/init.S @@ -21,314 +21,314 @@ board_asm_init: ori r4,r4,0x0000 lis r5,0xFEE0 ori r5,r5,0x0000 - lis r3,0x8000 # ADDR_00 + lis r3,0x8000 # ADDR_00 ori r3,r3,0x0000 stwbrx r3,0,r4 - li r3,0x1057 # VENDOR + li r3,0x1057 # VENDOR li r8, 0x0 sthbrx r3,r8,r5 - lis r3,0x8000 # ADDR_02 + lis r3,0x8000 # ADDR_02 ori r3,r3,0x0002 stwbrx r3,0,r4 - li r3,0x0004 # ID + li r3,0x0004 # ID li r8, 0x2 sthbrx r3,r8,r5 - lis r3,0x8000 # ADDR_04 + lis r3,0x8000 # ADDR_04 ori r3,r3,0x0004 stwbrx r3,0,r4 - li r3,0x0006 # PCICMD + li r3,0x0006 # PCICMD li r8, 0x0 sthbrx r3,r8,r5 - lis r3,0x8000 # ADDR_06 + lis r3,0x8000 # ADDR_06 ori r3,r3,0x0006 stwbrx r3,0,r4 - li r3,0x00A0 # PCISTAT + li r3,0x00A0 # PCISTAT li r8, 0x2 sthbrx r3,r8,r5 - lis r3,0x8000 # ADDR_08 + lis r3,0x8000 # ADDR_08 ori r3,r3,0x0008 stwbrx r3,0,r4 - li r3,0x10 # REVID + li r3,0x10 # REVID stb r3,0x0(r5) - lis r3,0x8000 # ADDR_09 + lis r3,0x8000 # ADDR_09 ori r3,r3,0x0009 stwbrx r3,0,r4 - li r3,0x00 # PROGIR + li r3,0x00 # PROGIR stb r3,0x1(r5) - lis r3,0x8000 # ADDR_0A + lis r3,0x8000 # ADDR_0A ori r3,r3,0x000A stwbrx r3,0,r4 - li r3,0x00 # SUBCCODE + li r3,0x00 # SUBCCODE stb r3,0x2(r5) - lis r3,0x8000 # ADDR_0B + lis r3,0x8000 # ADDR_0B ori r3,r3,0x000B stwbrx r3,0,r4 - li r3,0x06 # PBCCR + li r3,0x06 # PBCCR stb r3,0x3(r5) - lis r3,0x8000 # ADDR_0C + lis r3,0x8000 # ADDR_0C ori r3,r3,0x000C stwbrx r3,0,r4 - li r3,0x08 # PCLSR + li r3,0x08 # PCLSR stb r3,0x0(r5) - lis r3,0x8000 # ADDR_0D + lis r3,0x8000 # ADDR_0D ori r3,r3,0x000D stwbrx r3,0,r4 - li r3,0x00 # PLTR + li r3,0x00 # PLTR stb r3,0x1(r5) - lis r3,0x8000 # ADDR_0E + lis r3,0x8000 # ADDR_0E ori r3,r3,0x000E stwbrx r3,0,r4 - li r3,0x00 # HEADTYPE + li r3,0x00 # HEADTYPE stb r3,0x2(r5) - lis r3,0x8000 # ADDR_0F + lis r3,0x8000 # ADDR_0F ori r3,r3,0x000F stwbrx r3,0,r4 - li r3,0x00 # BISTCTRL + li r3,0x00 # BISTCTRL stb r3,0x3(r5) - lis r3,0x8000 # ADDR_10 + lis r3,0x8000 # ADDR_10 ori r3,r3,0x0010 stwbrx r3,0,r4 - lis r3,0x0000 # LMBAR + lis r3,0x0000 # LMBAR ori r3,r3,0x0008 li r8, 0x0 stwbrx r3,r8,r5 - lis r3,0x8000 # ADDR_14 + lis r3,0x8000 # ADDR_14 ori r3,r3,0x0014 stwbrx r3,0,r4 - lis r3,0xF000 # PCSRBAR + lis r3,0xF000 # PCSRBAR ori r3,r3,0x0000 li r8, 0x0 stwbrx r3,r8,r5 - lis r3,0x8000 # ADDR_3C + lis r3,0x8000 # ADDR_3C ori r3,r3,0x003C stwbrx r3,0,r4 - li r3,0x00 # ILR + li r3,0x00 # ILR stb r3,0x0(r5) - lis r3,0x8000 # ADDR_3D + lis r3,0x8000 # ADDR_3D ori r3,r3,0x003D stwbrx r3,0,r4 - li r3,0x01 # INTPIN + li r3,0x01 # INTPIN stb r3,0x1(r5) - lis r3,0x8000 # ADDR_3E + lis r3,0x8000 # ADDR_3E ori r3,r3,0x003E stwbrx r3,0,r4 - li r3,0x00 # MIN_GNT + li r3,0x00 # MIN_GNT stb r3,0x2(r5) - lis r3,0x8000 # ADDR_3F + lis r3,0x8000 # ADDR_3F ori r3,r3,0x003F stwbrx r3,0,r4 - li r3,0x00 # MAX_LAT + li r3,0x00 # MAX_LAT stb r3,0x3(r5) - lis r3,0x8000 # ADDR_40 + lis r3,0x8000 # ADDR_40 ori r3,r3,0x0040 stwbrx r3,0,r4 - li r3,0x00 # BUSNB + li r3,0x00 # BUSNB stb r3,0x0(r5) - lis r3,0x8000 # ADDR_41 + lis r3,0x8000 # ADDR_41 ori r3,r3,0x0041 stwbrx r3,0,r4 - li r3,0x00 # SBUSNB + li r3,0x00 # SBUSNB stb r3,0x1(r5) - lis r3,0x8000 # ADDR_46 + lis r3,0x8000 # ADDR_46 ori r3,r3,0x0046 stwbrx r3,0,r4 -# li r3,0xE080 # PCIARB - li r3,-0x1F80 # PCIARB +# li r3,0xE080 # PCIARB + li r3,-0x1F80 # PCIARB li r8, 0x2 sthbrx r3,r8,r5 - lis r3,0x8000 # ADDR_70 + lis r3,0x8000 # ADDR_70 ori r3,r3,0x0070 stwbrx r3,0,r4 - li r3,0x0000 # PMCR1 + li r3,0x0000 # PMCR1 li r8, 0x0 sthbrx r3,r8,r5 - lis r3,0x8000 # ADDR_72 + lis r3,0x8000 # ADDR_72 ori r3,r3,0x0072 stwbrx r3,0,r4 - li r3,0xC0 # PMCR2 + li r3,0xC0 # PMCR2 stb r3,0x2(r5) - lis r3,0x8000 # ADDR_73 + lis r3,0x8000 # ADDR_73 ori r3,r3,0x0073 stwbrx r3,0,r4 - li r3,0xEF # ODCR + li r3,0xEF # ODCR stb r3,0x3(r5) - lis r3,0x8000 # ADDR_74 + lis r3,0x8000 # ADDR_74 ori r3,r3,0x0074 stwbrx r3,0,r4 - li r3,0x7D00 # CLKDCR + li r3,0x7D00 # CLKDCR li r8, 0x0 sthbrx r3,r8,r5 - lis r3,0x8000 # ADDR_76 + lis r3,0x8000 # ADDR_76 ori r3,r3,0x0076 stwbrx r3,0,r4 - li r3,0x00 # MDCR + li r3,0x00 # MDCR stb r3,0x2(r5) lis r6,0xFCE0 ori r6,r6,0x0000 # r6 is the EUMBAR Base Address - lis r3,0x8000 # ADDR_78 + lis r3,0x8000 # ADDR_78 ori r3,r3,0x0078 stwbrx r3,0,r4 - lis r3,0xFCE0 # EUMBBAR + lis r3,0xFCE0 # EUMBBAR ori r3,r3,0x0000 li r8, 0x0 stwbrx r3,r8,r5 - lis r3,0x8000 # ADDR_80 + lis r3,0x8000 # ADDR_80 ori r3,r3,0x0080 stwbrx r3,0,r4 - lis r3,0xFFFF # MSADDR1 + lis r3,0xFFFF # MSADDR1 ori r3,r3,0x4000 li r8, 0x0 stwbrx r3,r8,r5 - lis r3,0x8000 # ADDR_84 + lis r3,0x8000 # ADDR_84 ori r3,r3,0x0084 stwbrx r3,0,r4 - lis r3,0xFFFF # MSADDR2 + lis r3,0xFFFF # MSADDR2 ori r3,r3,0xFFFF li r8, 0x0 stwbrx r3,r8,r5 - lis r3,0x8000 # ADDR_88 + lis r3,0x8000 # ADDR_88 ori r3,r3,0x0088 stwbrx r3,0,r4 - lis r3,0x0303 # EMSADDR1 + lis r3,0x0303 # EMSADDR1 ori r3,r3,0x0000 li r8, 0x0 stwbrx r3,r8,r5 - lis r3,0x8000 # ADDR_8C + lis r3,0x8000 # ADDR_8C ori r3,r3,0x008C stwbrx r3,0,r4 - lis r3,0x0303 # EMSADDR2 + lis r3,0x0303 # EMSADDR2 ori r3,r3,0x0303 li r8, 0x0 stwbrx r3,r8,r5 - lis r3,0x8000 # ADDR_90 + lis r3,0x8000 # ADDR_90 ori r3,r3,0x0090 stwbrx r3,0,r4 - lis r3,0xFFFF # EMEADDR1 + lis r3,0xFFFF # EMEADDR1 ori r3,r3,0x7F3F li r8, 0x0 stwbrx r3,r8,r5 - lis r3,0x8000 # ADDR_94 + lis r3,0x8000 # ADDR_94 ori r3,r3,0x0094 stwbrx r3,0,r4 - lis r3,0xFFFF # EMEADDR2 + lis r3,0xFFFF # EMEADDR2 ori r3,r3,0xFFFF li r8, 0x0 stwbrx r3,r8,r5 - lis r3,0x8000 # ADDR_98 + lis r3,0x8000 # ADDR_98 ori r3,r3,0x0098 stwbrx r3,0,r4 - lis r3,0x0303 # EXTEMEM1 + lis r3,0x0303 # EXTEMEM1 ori r3,r3,0x0000 li r8, 0x0 stwbrx r3,r8,r5 - lis r3,0x8000 # ADDR_9C + lis r3,0x8000 # ADDR_9C ori r3,r3,0x009C stwbrx r3,0,r4 - lis r3,0x0303 # EXTEMEM2 + lis r3,0x0303 # EXTEMEM2 ori r3,r3,0x0303 li r8, 0x0 stwbrx r3,r8,r5 - lis r3,0x8000 # ADDR_A0 + lis r3,0x8000 # ADDR_A0 ori r3,r3,0x00A0 stwbrx r3,0,r4 - li r3,0x03 # MEMBNKEN + li r3,0x03 # MEMBNKEN stb r3,0x0(r5) - lis r3,0x8000 # ADDR_A3 + lis r3,0x8000 # ADDR_A3 ori r3,r3,0x00A3 stwbrx r3,0,r4 - li r3,0x00 # MEMPMODE + li r3,0x00 # MEMPMODE stb r3,0x3(r5) - lis r3,0x8000 # ADDR_B8 + lis r3,0x8000 # ADDR_B8 ori r3,r3,0x00B8 stwbrx r3,0,r4 - li r3,0x00 # ECCCNT + li r3,0x00 # ECCCNT stb r3,0x0(r5) - lis r3,0x8000 # ADDR_B9 + lis r3,0x8000 # ADDR_B9 ori r3,r3,0x00B9 stwbrx r3,0,r4 - li r3,0x00 # ECCTRG + li r3,0x00 # ECCTRG stb r3,0x1(r5) - lis r3,0x8000 # ADDR_C0 + lis r3,0x8000 # ADDR_C0 ori r3,r3,0x00C0 stwbrx r3,0,r4 - li r3,0xFF # ERRENR1 + li r3,0xFF # ERRENR1 stb r3,0x0(r5) - lis r3,0x8000 # ADDR_C1 + lis r3,0x8000 # ADDR_C1 ori r3,r3,0x00C1 stwbrx r3,0,r4 - li r3,0x00 # ERRDR1 + li r3,0x00 # ERRDR1 stb r3,0x1(r5) - lis r3,0x8000 # ADDR_C3 + lis r3,0x8000 # ADDR_C3 ori r3,r3,0x00C3 stwbrx r3,0,r4 - li r3,0x50 # IPBESR + li r3,0x50 # IPBESR stb r3,0x3(r5) - lis r3,0x8000 # ADDR_C4 + lis r3,0x8000 # ADDR_C4 ori r3,r3,0x00C4 stwbrx r3,0,r4 - li r3,0xBF # ERRENR2 + li r3,0xBF # ERRENR2 stb r3,0x0(r5) - lis r3,0x8000 # ADDR_C5 + lis r3,0x8000 # ADDR_C5 ori r3,r3,0x00C5 stwbrx r3,0,r4 - li r3,0x00 # ERRDR2 + li r3,0x00 # ERRDR2 stb r3,0x1(r5) - lis r3,0x8000 # ADDR_C7 + lis r3,0x8000 # ADDR_C7 ori r3,r3,0x00C7 stwbrx r3,0,r4 - li r3,0x00 # PCIBESR + li r3,0x00 # PCIBESR stb r3,0x3(r5) - lis r3,0x8000 # ADDR_C8 + lis r3,0x8000 # ADDR_C8 ori r3,r3,0x00C8 stwbrx r3,0,r4 - lis r3,0x0000 # BERRADDR + lis r3,0x0000 # BERRADDR ori r3,r3,0xE0FE li r8, 0x0 stwbrx r3,r8,r5 - lis r3,0x8000 # ADDR_E0 + lis r3,0x8000 # ADDR_E0 ori r3,r3,0x00E0 stwbrx r3,0,r4 - li r3,0xC0 # AMBOR + li r3,0xC0 # AMBOR stb r3,0x0(r5) - lis r3,0x8000 # ADDR_F4 + lis r3,0x8000 # ADDR_F4 ori r3,r3,0x00F4 stwbrx r3,0,r4 - lis r3,0x0000 # MCCR2 + lis r3,0x0000 # MCCR2 ori r3,r3,0x020C li r8, 0x0 stwbrx r3,r8,r5 - lis r3,0x8000 # ADDR_F8 + lis r3,0x8000 # ADDR_F8 ori r3,r3,0x00F8 stwbrx r3,0,r4 - lis r3,0x0230 # MCCR3 + lis r3,0x0230 # MCCR3 ori r3,r3,0x0000 li r8, 0x0 stwbrx r3,r8,r5 - lis r3,0x8000 # ADDR_FC + lis r3,0x8000 # ADDR_FC ori r3,r3,0x00FC stwbrx r3,0,r4 - lis r3,0x2532 # MCCR4 + lis r3,0x2532 # MCCR4 ori r3,r3,0x2220 li r8, 0x0 stwbrx r3,r8,r5 - lis r3,0x8000 # ADDR_F0 + lis r3,0x8000 # ADDR_F0 ori r3,r3,0x00F0 stwbrx r3,0,r4 - lis r3,0xFFC8 # MCCR1 + lis r3,0xFFC8 # MCCR1 ori r3,r3,0x0000 li r8, 0x0 stwbrx r3,r8,r5 - lis r3,0x8000 # ADDR_A8 + lis r3,0x8000 # ADDR_A8 ori r3,r3,0x00A8 stwbrx r3,0,r4 - lis r3,0xFF14 # PICR1 + lis r3,0xFF14 # PICR1 ori r3,r3,0x1CC8 li r8, 0x0 stwbrx r3,r8,r5 - lis r3,0x8000 # ADDR_AC + lis r3,0x8000 # ADDR_AC ori r3,r3,0x00AC stwbrx r3,0,r4 - lis r3,0x0000 # PICR2 + lis r3,0x0000 # PICR2 ori r3,r3,0x0000 li r8, 0x0 stwbrx r3,r8,r5 diff --git a/board/ppmc7xx/ppmc7xx.c b/board/ppmc7xx/ppmc7xx.c index 0597c72..402ac5e 100644 --- a/board/ppmc7xx/ppmc7xx.c +++ b/board/ppmc7xx/ppmc7xx.c @@ -1,9 +1,9 @@ /* * ppmc7xx.c * --------- - * + * * Main board-specific routines for Wind River PPMC 7xx/74xx board. - * + * * By Richard Danter (richard.danter@windriver.com) * Copyright (C) 2005 Wind River Systems */ @@ -24,7 +24,7 @@ extern void _start_warm(void); /* * initdram() - * + * * This function normally initialises the (S)DRAM of the system. For this board * the SDRAM was already initialised by board_asm_init (see init.S) so we just * return the size of RAM. @@ -37,12 +37,12 @@ long initdram( int board_type ) /* * after_reloc() - * + * * This is called after U-Boot has been copied from Flash/ROM to RAM. It gives * us an opportunity to do some additional setup before the rest of the system * is initialised. We don't need to do anything, so we just call board_init_r() * which should never return. - */ + */ void after_reloc( ulong dest_addr, gd_t* gd ) { /* Jump to the main U-Boot board init code */ @@ -52,7 +52,7 @@ void after_reloc( ulong dest_addr, gd_t* gd ) /* * checkboard() - * + * * We could do some board level checks here, such as working out what version * it is, but for this board we simply display it's name (on the console). */ @@ -65,7 +65,7 @@ int checkboard( void ) /* * misc_init_r - * + * * Used for other setup which needs to be done late in the bring-up phase. */ int misc_init_r( void ) @@ -78,27 +78,27 @@ int misc_init_r( void ) /* Enable the I-Cache */ icache_enable(); - + return 0; } /* * do_reset() - * + * * Shell command to reset the board. */ void do_reset( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] ) { printf( "Resetting...\n" ); - + /* Disabe and invalidate cache */ icache_disable(); dcache_disable(); /* Jump to warm start (in RAM) */ _start_warm(); - + /* Should never get here */ while(1); } diff --git a/board/tqm5200/Makefile b/board/tqm5200/Makefile index ab0ff1a..9a1ea48 100644 --- a/board/tqm5200/Makefile +++ b/board/tqm5200/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a -OBJS := $(BOARD).o cmd_stk52xx.o +OBJS := $(BOARD).o cmd_stk52xx.o cmd_tb5200.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) diff --git a/board/tqm5200/cmd_stk52xx.c b/board/tqm5200/cmd_stk52xx.c index 8b9057f..2326a28 100755 --- a/board/tqm5200/cmd_stk52xx.c +++ b/board/tqm5200/cmd_stk52xx.c @@ -30,6 +30,7 @@ #include #if (CONFIG_COMMANDS & CFG_CMD_BSP) +#if defined (CONFIG_STK52XX) #define DEFAULT_VOL 45 #define DEFAULT_FREQ 500 @@ -60,7 +61,6 @@ static int spi_transmit(unsigned char data); static void pcm1772_write_reg(unsigned char addr, unsigned char data); static void set_attenuation(unsigned char attenuation); -#ifdef CONFIG_STK52XX static void spi_init(void) { struct mpc5xxx_spi *spi = (struct mpc5xxx_spi*)MPC5XXX_SPI; diff --git a/board/tqm5200/cmd_tb5200.c b/board/tqm5200/cmd_tb5200.c new file mode 100644 index 0000000..8784b1f --- /dev/null +++ b/board/tqm5200/cmd_tb5200.c @@ -0,0 +1,104 @@ +/* + * (C) Copyright 2005 - 2006 + * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * TB5200 specific functions + */ +/*#define DEBUG*/ + +#include +#include + +#if (CONFIG_COMMANDS & CFG_CMD_BSP) +#if defined (CONFIG_TB5200) + +#define SM501_PANEL_DISPLAY_CONTROL 0x00080000UL + +static void led_init(void) +{ + struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT; + + /* configure timer 4 for simple GPIO output */ + gpt->gpt4.emsr |= 0x00000024; +} + +int cmd_led(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT; + + led_init(); + + if (strcmp (argv[1], "on") == 0) { + debug ("switch status LED on\n"); + gpt->gpt4.emsr |= (1 << 4); + } else if (strcmp (argv[1], "off") == 0) { + debug ("switch status LED off\n"); + gpt->gpt4.emsr &= ~(1 << 4); + } else { + printf ("Usage:\nled on/off\n"); + return 1; + } + + return 0; +} + +static void sm501_backlight (unsigned int state) +{ + if (state == 1) { + *(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) |= + (1 << 26) | (1 << 27); + } else if (state == 0) + *(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) &= + ~((1 << 26) | (1 << 27)); +} + +int cmd_backlight(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + if (strcmp (argv[1], "on") == 0) { + debug ("switch backlight on\n"); + sm501_backlight (1); + } else if (strcmp (argv[1], "off") == 0) { + debug ("switch backlight off\n"); + sm501_backlight (0); + } else { + printf ("Usage:\nbacklight on/off\n"); + return 1; + } + + return 0; +} + +U_BOOT_CMD( + led , 2, 1, cmd_led, + "led - switch status LED on or off\n", + "on/off\n" +); + +U_BOOT_CMD( + backlight , 2, 1, cmd_backlight, + "backlight - switch backlight on or off\n", + "on/off\n" + ); + +#endif /* CONFIG_STK52XX */ +#endif /* CFG_CMD_BSP */ diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c index 310abd2..c6309e3 100644 --- a/board/tqm5200/tqm5200.c +++ b/board/tqm5200/tqm5200.c @@ -260,6 +260,9 @@ int checkboard (void) #if defined (CONFIG_STK52XX) puts (" on a STK52XX baseboard\n"); #endif +#if defined (CONFIG_TB5200) + puts (" on a TB5200 baseboard\n"); +#endif return 0; } @@ -567,10 +570,15 @@ void video_get_info_str (int line_number, char *info) { if (line_number == 1) { strcpy (info, " Board: TQM5200 (TQ-Components GmbH)"); -#if defined (CONFIG_STK52XX) +#if defined (CONFIG_STK52XX) || defined (CONFIG_TB5200) } else if (line_number == 2) { +#if defined (CONFIG_STK52XX) strcpy (info, " on a STK52XX baseboard"); #endif +#if defined (CONFIG_TB5200) + strcpy (info, " on a TB5200 baseboard"); +#endif +#endif } else { info [0] = '\0'; diff --git a/board/tqm85xx/tqm85xx.c b/board/tqm85xx/tqm85xx.c index befe8b7..a87affc 100644 --- a/board/tqm85xx/tqm85xx.c +++ b/board/tqm85xx/tqm85xx.c @@ -423,4 +423,3 @@ int board_early_init_r (void) return (0); } #endif /* CONFIG_BOARD_EARLY_INIT_R */ - diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c index 3749811..4631519 100644 --- a/cpu/ppc4xx/serial.c +++ b/cpu/ppc4xx/serial.c @@ -635,7 +635,7 @@ void serial_setbrg (void) tmp = gd->baudrate * udiv * 16; bdiv = (clk + tmp / 2) / tmp; -#endif /* !defined(CFG_EXT_SERIAL_CLOCK) && (...) */ +#endif /* !defined(CFG_EXT_SERIAL_CLOCK) && (...) */ #if defined(CONFIG_SERIAL_MULTI) out8 (dev_base + UART_LCR, 0x80); /* set DLAB bit */ diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 0a6f81d..699fa7f 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -159,7 +159,7 @@ _start_440: | Core bug fix. Clear the esr +-----------------------------------------------------------------*/ li r0,0 - mtspr esr,r0 + mtspr esr,r0 /*----------------------------------------------------------------*/ /* Clear and set up some registers. */ /*----------------------------------------------------------------*/ diff --git a/drivers/Makefile b/drivers/Makefile index 8e79528..9be95c7 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -50,7 +50,7 @@ OBJS = 3c589.o 5701rls.o ali512x.o \ videomodes.o w83c553f.o \ ks8695eth.o \ pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \ - rpx_pcmcia.o + rpx_pcmcia.o all: $(LIB) diff --git a/drivers/tqm8xx_pcmcia.c b/drivers/tqm8xx_pcmcia.c index 8d4a85c..b5b9308 100644 --- a/drivers/tqm8xx_pcmcia.c +++ b/drivers/tqm8xx_pcmcia.c @@ -191,7 +191,7 @@ int pcmcia_hardware_enable(int slot) udelay(10000); debug ("[%d] %s: PIPR(%p)=0x%x\n", __LINE__,__FUNCTION__, &(pcmp->pcmc_pipr),pcmp->pcmc_pipr); - + if (check_card_is_absent(slot)) { printf (" No Card found\n"); return (1); @@ -206,7 +206,7 @@ int pcmcia_hardware_enable(int slot) reg, (reg&PCMCIA_VS1(slot))?"n":"ff", (reg&PCMCIA_VS2(slot))?"n":"ff"); - + if ((reg & mask) == mask) { power_on_5_0(slot); puts (" 5.0V card found: "); @@ -228,7 +228,7 @@ int pcmcia_hardware_enable(int slot) reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */ reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */ reg &= ~NSCU_GCRX_CXOE; - + PCMCIA_PGCRX(slot) = reg; udelay(250000); /* some cards need >150 ms to come up :-( */ @@ -285,7 +285,7 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp) reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */ reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */ reg |= NSCU_GCRX_CXOE; /* active low */ - + PCMCIA_PGCRX(slot) = reg; udelay(500); diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h new file mode 100644 index 0000000..d793847 --- /dev/null +++ b/include/configs/TB5200.h @@ -0,0 +1,470 @@ +/* + * (C) Copyright 2003-2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004-2006 + * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_TQM5200 1 /* ... on TQM5200 module */ +#define CONFIG_TB5200 1 /* ... on a TB5200 base board */ + +#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* default console is on PSC1 */ +#define CONFIG_SERIAL_MULTI 1 /* support multiple consoles */ +#define CONFIG_PSC_CONSOLE2 6 /* second console is on PSC6 */ +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +/* + * Video console + */ +#if 1 +#define CONFIG_VIDEO +#define CONFIG_VIDEO_SM501 +#define CONFIG_VIDEO_SM501_32BPP +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_LOGO +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_CONSOLE_EXTRA_INFO +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_SPLASH_SCREEN +#define CFG_CONSOLE_IS_IN_ENV +#endif + +#ifdef CONFIG_VIDEO +#define ADD_BMP_CMD CFG_CMD_BMP +#else +#define ADD_BMP_CMD 0 +#endif + +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + +/* USB */ +#define CONFIG_USB_OHCI +#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT +#define CONFIG_USB_STORAGE + +/* POST support */ +#define CONFIG_POST (CFG_POST_MEMORY | \ + CFG_POST_CPU | \ + CFG_POST_I2C) + +#ifdef CONFIG_POST +#define CFG_CMD_POST_DIAG CFG_CMD_DIAG +/* preserve space for the post_word at end of on-chip SRAM */ +#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 +#else +#define CFG_CMD_POST_DIAG 0 +#endif + +/* IDE */ +#define ADD_IDE_CMD (CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2) + +/* + * Supported commands + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + ADD_BMP_CMD | \ + ADD_IDE_CMD | \ + ADD_PCI_CMD | \ + ADD_USB_CMD | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_ECHO | \ + CFG_CMD_EEPROM | \ + CFG_CMD_I2C | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_MII | \ + CFG_CMD_NFS | \ + CFG_CMD_PING | \ + CFG_CMD_POST_DIAG | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SNTP | \ + CFG_CMD_BSP) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +#define CONFIG_TIMESTAMP /* display image timestamps */ + +#if (TEXT_BASE == 0xFC000000) /* Boot low */ +# define CFG_LOWBOOT 1 +#endif + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "rootpath=/opt/eldk/ppc_6xx\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "flash_self=run ramargs addip;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm ${kernel_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ + "bootfile=/tftpboot/tqm5200/uImage\0" \ + "load=tftp 200000 $(u-boot)\0" \ + "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \ + "update=protect off FC000000 FC05FFFF;" \ + "erase FC000000 FC05FFFF;" \ + "cp.b 200000 FC000000 ${filesize};" \ + "protect on FC000000 FC05FFFF\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run net_nfs" + +/* + * IPB Bus clocking configuration. + */ +#define CFG_IPBSPEED_133 /* define for 133MHz speed */ + +#if defined(CFG_IPBSPEED_133) +/* + * PCI Bus clocking configuration + * + * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if + * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't + * been tested with a IPB Bus Clock of 66 MHz. + */ +#define CFG_PCISPEED_66 /* define for 66MHz speed */ +#endif + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CFG_I2C_MODULE 2 /* Select I2C module #2 */ + +/* + * I2C clock frequency + * + * Please notice, that the resulting clock frequency could differ from the + * configured value. This is because the I2C clock is derived from system + * clock over a frequency divider with only a few divider values. U-boot + * calculates the best approximation for CFG_I2C_SPEED. However the calculated + * approximation allways lies below the configured value, never above. + */ +#define CFG_I2C_SPEED 100000 /* 100 kHz */ +#define CFG_I2C_SLAVE 0x7F + +/* + * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work + * also). For other EEPROMs configuration should be verified. On Mini-FAP the + * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the + * same configuration could be used. + */ +#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 + +/* List of I2C addresses to be verified by POST */ +#undef I2C_ADDR_LIST +#define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \ + CFG_I2C_RTC_ADDR, \ + CFG_I2C_SLAVE } + +/* + * Flash configuration + */ +#define CFG_FLASH_BASE TEXT_BASE /* 0xFC000000 */ + +/* use CFI flash driver if no module variant is spezified */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START } +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */ +#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */ +#undef CFG_FLASH_USE_BUFFER_WRITE /* not supported yet for AMD */ + +#if !defined(CFG_LOWBOOT) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00760000 + 0x00800000) +#else /* CFG_LOWBOOT */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00060000) +#endif /* CFG_LOWBOOT */ +#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks + (= chip selects) */ +#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ + +/* Dynamic MTD partition support */ +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=TQM5200-0" +#define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \ + "1408k(kernel)," \ + "2m(initrd)," \ + "4m(small-fs)," \ + "16m(big-fs)," \ + "8m(misc)" + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x10000 +#define CFG_ENV_SECT_SIZE 0x20000 +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/* + * Memory map + */ +#define CFG_MBAR 0xF0000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_DEFAULT_MBAR 0x80000000 + +/* Use ON-Chip SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#ifdef CONFIG_POST +/* preserve space for the post_word at end of on-chip SRAM */ +#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#else +#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE +#endif + + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +# define CFG_RAMBOOT 1 +#endif + +#define CFG_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ +#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +/* + * Define CONFIG_FEC_10MBIT to force FEC at 10Mb + */ +/* #define CONFIG_FEC_10MBIT 1 */ +#define CONFIG_PHY_ADDR 0x00 + +/* + * GPIO configuration + * + * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1): + * Bit 0 (mask: 0x80000000): 1 + * use ALT CAN position: Bits 2-3 (mask: 0x30000000): + * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting. + * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1. + * Use for REV200 STK52XX boards. Do not use with REV100 modules + * (because, there I2C1 is used as I2C bus) + * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100 + * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030) + * 000 -> All PSC2 pins are GIOPs + * 001 -> CAN1/2 on PSC2 pins + * Use for REV100 STK52xx boards + * use PSC3: Bits 20:23 (mask: 0x00000300): + * 0001 -> USB2 + * 0000 -> GPIO + * use PSC6: + * on STK52xx: + * use as UART. Pins PSC6_0 to PSC6_3 are used. + * Bits 9:11 (mask: 0x00700000): + * 101 -> PSC6 : Extended POST test is not available + * on MINI-FAP and TQM5200_IB: + * use PSC6_0 to PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000): + * 000 -> PSC6 could not be used as UART, CODEC or IrDA + * GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST + * tests. + */ +#define CFG_GPS_PORT_CONFIG 0x81500114 + +/* + * RTC configuration + */ +#define CONFIG_RTC_M41T11 1 +#define CFG_I2C_RTC_ADDR 0x68 +#define CFG_M41T11_BASE_YEAR 1900 /* because Linux uses the same base + year */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +/* Enable an alternate, more extensive memory test */ +#define CFG_ALT_MEMTEST + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, + * which is normally part of the default commands (CFV_CMD_DFL) + */ +#define CONFIG_LOOPW + +/* + * Various low-level settings + */ +#if defined(CONFIG_MPC5200) +#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +#define CFG_HID0_FINAL HID0_ICE +#else +#define CFG_HID0_INIT 0 +#define CFG_HID0_FINAL 0 +#endif + +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#ifdef CFG_PCISPEED_66 +#define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */ +#else +#define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */ +#endif +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE + +/* automatic configuration of chip selects */ +#ifdef CONFIG_CS_AUTOCONF +#define CONFIG_LAST_STAGE_INIT +#endif + +/* + * SRAM - Do not map below 2 GB in address space, because this area is used + * for SDRAM autosizing. + */ +#if defined (CONFIG_CS_AUTOCONF) +#define CFG_CS2_START 0xE5000000 +#define CFG_CS2_SIZE 0x100000 /* 1 MByte */ +#define CFG_CS2_CFG 0x0004D930 +#endif + +/* + * Grafic controller - Do not map below 2 GB in address space, because this + * area is used for SDRAM autosizing. + */ +#if defined (CONFIG_CS_AUTOCONF) +#define SM501_FB_BASE 0xE0000000 +#define CFG_CS1_START (SM501_FB_BASE) +#define CFG_CS1_SIZE 0x4000000 /* 64 MByte */ +#define CFG_CS1_CFG 0x8F48FF70 +#define SM501_MMIO_BASE CFG_CS1_START + 0x03E00000 +#endif + +#define CFG_CS_BURST 0x00000000 +#define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */ + +#define CFG_RESET_ADDRESS 0xff000000 + +/*----------------------------------------------------------------------- + * USB stuff + *----------------------------------------------------------------------- + */ +#define CONFIG_USB_CLOCK 0x0001BBBB +#define CONFIG_USB_CONFIG 0x00001000 + +/*----------------------------------------------------------------------- + * IDE/ATA stuff Supports IDE harddisk + *----------------------------------------------------------------------- + */ + +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ + +#define CONFIG_IDE_RESET /* reset for ide supported */ +#define CONFIG_IDE_PREINIT + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR MPC5XXX_ATA + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET (0x0060) + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET (0x005C) + +/* Interval between registers */ +#define CFG_ATA_STRIDE 4 + +#endif /* __CONFIG_H */ diff --git a/include/configs/gth2.h b/include/configs/gth2.h index 77d2d56..a49ed3b 100644 --- a/include/configs/gth2.h +++ b/include/configs/gth2.h @@ -12,7 +12,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -34,7 +34,7 @@ #define CONFIG_AU1000 1 -#define CONFIG_MISC_INIT_R 1 +#define CONFIG_MISC_INIT_R 1 #define CONFIG_ETHADDR DE:AD:BE:EF:01:02 /* Ethernet address */ @@ -59,21 +59,21 @@ #define CONFIG_AUTOBOOT_DELAY_STR "d" #define CONFIG_AUTOBOOT_STOP_STR " " -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#define CONFIG_BOOTARGS "panic=1" +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ +#define CONFIG_BOOTARGS "panic=1" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CONFIG_EXTRA_ENV_SETTINGS \ "addmisc=setenv bootargs $(bootargs) " \ - "ethaddr=$(ethaddr) \0" \ - "netboot=bootp;run addmisc;bootm\0" \ - "" + "ethaddr=$(ethaddr) \0" \ + "netboot=bootp;run addmisc;bootm\0" \ + "" /* Boot from Compact flash partition 2 as default */ #define CONFIG_BOOTCOMMAND "ide reset;disk 0x81000000 0:2;run addmisc;bootm" -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP ) & \ +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP ) & \ ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | \ - CFG_CMD_MII | CFG_CMD_LOADS | CFG_CMD_LOADB | CFG_CMD_ELF | \ + CFG_CMD_MII | CFG_CMD_LOADS | CFG_CMD_LOADB | CFG_CMD_ELF | \ CFG_CMD_BDI | CFG_CMD_BEDBUG | CFG_CMD_NFS | CFG_CMD_AUTOSCRIPT )) #include @@ -81,11 +81,11 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "GTH2 # " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args*/ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "GTH2 # " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args*/ #define CFG_MALLOC_LEN 128*1024 @@ -93,16 +93,16 @@ #define CFG_MHZ 500 -#define CFG_HZ (CFG_MHZ * 1000000) /* FIXME causes overflow in net.c */ +#define CFG_HZ (CFG_MHZ * 1000000) /* FIXME causes overflow in net.c */ #define CFG_SDRAM_BASE 0x80000000 /* Cached addr */ -#define CFG_LOAD_ADDR 0x81000000 /* default load address */ +#define CFG_LOAD_ADDR 0x81000000 /* default load address */ #define CFG_MEMTEST_START 0x80100000 #define CFG_MEMTEST_END 0x83000000 -#define CONFIG_HW_WATCHDOG 1 +#define CONFIG_HW_WATCHDOG 1 /*----------------------------------------------------------------------- * FLASH and environment organization @@ -113,8 +113,8 @@ #define PHYS_FLASH 0xbfc00000 /* Flash Bank #1 */ /* The following #defines are needed to get flash environment right */ -#define CFG_MONITOR_BASE TEXT_BASE -#define CFG_MONITOR_LEN (192 << 10) +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_LEN (192 << 10) #define CFG_INIT_SP_OFFSET 0x400000 @@ -125,7 +125,7 @@ #define CFG_FLASH_ERASE_TOUT (2 * CFG_HZ) /* Timeout for Flash Erase */ #define CFG_FLASH_WRITE_TOUT (2 * CFG_HZ) /* Timeout for Flash Write */ -#define CFG_ENV_IS_NOWHERE 1 +#define CFG_ENV_IS_NOWHERE 1 /* Address and size of Primary Environment Sector */ #define CFG_ENV_ADDR 0xB0030000 @@ -158,21 +158,21 @@ #define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ #define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ #undef CONFIG_IDE_RESET /* reset for ide not supported */ #define CFG_ATA_IDE0_OFFSET 0 -#define CFG_ATA_BASE_ADDR CFG_PCMCIA_IO_BASE +#define CFG_ATA_BASE_ADDR CFG_PCMCIA_IO_BASE /* Offset for data I/O */ -#define CFG_ATA_DATA_OFFSET 0 +#define CFG_ATA_DATA_OFFSET 0 -/* Offset for normal register accesses */ -#define CFG_ATA_REG_OFFSET 0 +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET 0 -/* Offset for alternate registers */ -#define CFG_ATA_ALT_OFFSET 0x0200 +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET 0x0200 /*----------------------------------------------------------------------- * Cache Configuration diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h index ea15524..072b9dd 100644 --- a/include/configs/ppmc7xx.h +++ b/include/configs/ppmc7xx.h @@ -1,9 +1,9 @@ /* * ppmc7xx.h * --------- - * + * * Wind River PPMC 7xx/74xx board configuration file. - * + * * By Richard Danter (richard.danter@windriver.com) * Copyright (C) 2005 Wind River Systems */ @@ -16,15 +16,15 @@ /*=================================================================== - * + * * User configurable settings - Modify to your preference - * + * *=================================================================== */ /* * Debug - * + * * DEBUG - Define this is you want extra debug info * GTREGREAD - Required to build with debug * do_bdinfo - Required to build with debug @@ -37,7 +37,7 @@ /* * CPU type - * + * * CONFIG_7xx - We have a 750 or 755 CPU * CONFIG_74xx - We have a 7400 CPU * CONFIG_ALTIVEC - We have altivec enabled CPU (only 7400) @@ -52,11 +52,11 @@ /* * Monitor configuration - * + * * CONFIG_COMMANDS - List of command sets to include in shell - * + * * The following command sets have been tested and known to work: - * + * * CFG_CMD_CACHE - Cache control commands * CFG_CMD_MEMORY - Memory display, change and test commands * CFG_CMD_FLASH - Erase and program flash @@ -91,7 +91,7 @@ /* * PCI config - * + * * CONFIG_PCI - Enable PCI bus * CONFIG_PCI_PNP - Enable Plug & Play support * CONFIG_PCI_SCAN_SHOW - Enable display of devices at startup @@ -104,7 +104,7 @@ /* * Network config - * + * * CONFIG_NET_MULTI - Support for multiple network interfaces * CONFIG_EEPRO100 - Intel 8255x Ethernet Controller * CONFIG_EEPRO100_SROM_WRITE - Enable writing to network card ROM @@ -117,18 +117,18 @@ /* * Enable extra init functions - * + * * CONFIG_MISC_INIT_F - Call pre-relocation init functions * CONFIG_MISC_INIT_R - Call post relocation init functions */ #undef CONFIG_MISC_INIT_F -#define CONFIG_MISC_INIT_R +#define CONFIG_MISC_INIT_R /* * Boot config - * + * * CONFIG_BOOTCOMMAND - Command(s) to execute to auto-boot * CONFIG_BOOTDELAY - How long to wait before auto-boot (in sec) */ @@ -142,9 +142,9 @@ /*=================================================================== - * + * * Board configuration settings - You should not need to modify these - * + * *=================================================================== */ @@ -154,9 +154,9 @@ /* * Memory map - * + * * This board runs in a standard CHRP (Map-B) configuration. - * + * * Type Start End Size Width Chip Sel * ----------- ----------- ----------- ------- ------- -------- * SDRAM 0x00000000 0x04000000 64MB 64b SDRAMCS0 @@ -164,9 +164,9 @@ * UART 0x7C000000 RCS2 * Mailbox 0xFF000000 RCS1 * Flash 0xFFC00000 0xFFFFFFFF 4MB 64b RCS0 - * + * * Flash sectors are laid out as follows. - * + * * Sector Start End Size Comments * ------- ----------- ----------- ------- ----------- * 0 0xFFC00000 0xFFC3FFFF 256KB @@ -193,7 +193,7 @@ /* * SDRAM config - see memory map details above. - * + * * CFG_SDRAM_BASE - Start address of SDRAM, this _must_ be zero! * CFG_SDRAM_SIZE - Total size of contiguous SDRAM bank(s) */ @@ -202,9 +202,9 @@ #define CFG_SDRAM_SIZE 0x04000000 -/* +/* * Flash config - see memory map details above. - * + * * CFG_FLASH_BASE - Start address of flash memory * CFG_FLASH_SIZE - Total size of contiguous flash mem * CFG_FLASH_ERASE_TOUT - Erase timeout in ms @@ -223,7 +223,7 @@ /* * Monitor config - see memory map details above - * + * * CFG_MONITOR_BASE - Base address of monitor code * CFG_MALLOC_LEN - Size of malloc pool (128KB) */ @@ -234,7 +234,7 @@ /* * Command shell settings - * + * * CFG_BARGSIZE - Boot Argument buffer size * CFG_BOOTMAPSZ - Size of app's mapped RAM at boot (Linux=8MB) * CFG_CBSIZE - Console Buffer (input) size @@ -261,10 +261,10 @@ /* * Environment config - see memory map details above - * + * * CFG_ENV_IS_IN_FLASH - The env variables are stored in flash * CFG_ENV_ADDR - Address of the sector containing env vars - * CFG_ENV_SIZE - Ammount of RAM for env vars (used to save RAM, 4KB) + * CFG_ENV_SIZE - Ammount of RAM for env vars (used to save RAM, 4KB) * CFG_ENV_SECT_SIZE - Size of sector containing env vars (32KB) */ @@ -282,7 +282,7 @@ * Since the main system RAM is initialised very early, we place the INIT_RAM * in the main system RAM just above the exception vectors. The contents are * copied to top of RAM by the init code. - * + * * CFG_INIT_RAM_ADDR - Address of Init RAM, above exception vect * CFG_INIT_RAM_END - Size of Init RAM * CFG_GBL_DATA_SIZE - Ammount of RAM to reserve for global data @@ -297,7 +297,7 @@ /* * Initial BAT config - * + * * BAT0 - System SDRAM * BAT1 - LED's and Serial Port * BAT2 - PCI Memory @@ -327,7 +327,7 @@ /* * Cache config - * + * * CFG_CACHELINE_SIZE - Size of a cache line (CPU specific) * CFG_L2 - L2 cache enabled if defined * L2_INIT - L2 cache init flags @@ -342,7 +342,7 @@ /* * Clocks config - * + * * CFG_BUS_HZ - Bus clock frequency in Hz * CFG_BUS_CLK - As above (?) * CFG_HZ - Decrementer freq in Hz @@ -355,7 +355,7 @@ /* * Serial port config - * + * * CFG_BAUDRATE_TABLE - List of valid baud rates * CFG_NS16550 - Include the NS16550 driver * CFG_NS16550_SERIAL - Include the serial (wrapper) driver @@ -398,7 +398,7 @@ /* * Extra init functions - * + * * CFG_BOARD_ASM_INIT - Call assembly init code */ @@ -407,11 +407,11 @@ /* * Boot flags - * + * * BOOTFLAG_COLD - Indicates a power-on boot * BOOTFLAG_WARM - Indicates a software reset */ - + #define BOOTFLAG_COLD 0x01 #define BOOTFLAG_WARM 0x02 diff --git a/include/ns16550.h b/include/ns16550.h index 996d915..34888a1 100644 --- a/include/ns16550.h +++ b/include/ns16550.h @@ -7,7 +7,7 @@ * added prototypes for ns16550.c * reduced no of com ports to 2 * modifications (c) Rob Taylor, Flying Pig Systems. 2000. - * + * * added support for port on 64-bit bus * by Richard Danter (richard.danter@windriver.com), (C) 2005 Wind River Systems */ -- cgit v0.10.2