From 4535a24c0c06e367bc40c43b4807bdb335513a1a Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Mon, 18 Nov 2013 08:07:23 +0100 Subject: arm926ejs, at91: add common phy_reset function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit add common phy reset code into a common function. Signed-off-by: Heiko Schocher Cc: Andreas Bießmann Cc: Bo Shen Cc: Jens Scharsig Cc: Sergey Lapin Cc: Stelian Pop Cc: Albin Tonnerre Cc: Eric Benard Cc: Markus Hubig Acked-by: Jens Scharsig (BuS Elektronik) Tested-by: Jens Scharsig (BuS Elektronik) Tested-by: Bo Shen Acked-by: Bo Shen Signed-off-by: Andreas Bießmann diff --git a/arch/arm/cpu/at91-common/Makefile b/arch/arm/cpu/at91-common/Makefile index d97053f..5b97838 100644 --- a/arch/arm/cpu/at91-common/Makefile +++ b/arch/arm/cpu/at91-common/Makefile @@ -8,4 +8,5 @@ # SPDX-License-Identifier: GPL-2.0+ # +obj-$(CONFIG_AT91_WANTS_COMMON_PHY) += phy.o obj-$(CONFIG_SPL_BUILD) += mpddrc.o spl.o diff --git a/arch/arm/cpu/at91-common/phy.c b/arch/arm/cpu/at91-common/phy.c new file mode 100644 index 0000000..3b6c60c --- /dev/null +++ b/arch/arm/cpu/at91-common/phy.c @@ -0,0 +1,57 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop + * Lead Tech Design + * + * (C) Copyright 2012 + * Markus Hubig + * IMKO GmbH + * + * Copyright (C) 2013 DENX Software Engineering, hs@denx.de + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include + +void at91_phy_reset(void) +{ + unsigned long erstl; + unsigned long start = get_timer(0); + unsigned long const timeout = 1000; /* 1000ms */ + at91_rstc_t *rstc = (at91_rstc_t *)ATMEL_BASE_RSTC; + + erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK; + + /* + * Need to reset PHY -> 500ms reset + * Reset PHY by pulling the NRST line for 500ms to low. To do so + * disable user reset for low level on NRST pin and poll the NRST + * level in reset status register. + */ + writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0x0D) | + AT91_RSTC_MR_URSTEN, &rstc->mr); + + writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr); + + /* Wait for end of hardware reset */ + while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) { + /* avoid shutdown by watchdog */ + WATCHDOG_RESET(); + mdelay(10); + + /* timeout for not getting stuck in an endless loop */ + if (get_timer(start) >= timeout) { + puts("*** ERROR: Timeout waiting for PHY reset!\n"); + break; + } + }; + + /* Restore NRST value */ + writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr); +} diff --git a/arch/arm/include/asm/arch-at91/at91_common.h b/arch/arm/include/asm/arch-at91/at91_common.h index 3ca4d5b..59e2f43 100644 --- a/arch/arm/include/asm/arch-at91/at91_common.h +++ b/arch/arm/include/asm/arch-at91/at91_common.h @@ -26,5 +26,6 @@ void at91_plla_init(u32 pllar); void at91_mck_init(u32 mckr); void at91_pmc_init(void); void mem_init(void); +void at91_phy_reset(void); #endif /* AT91_COMMON_H */ diff --git a/board/BuS/vl_ma2sc/vl_ma2sc.c b/board/BuS/vl_ma2sc/vl_ma2sc.c index e2ae6fd..412ff3b 100644 --- a/board/BuS/vl_ma2sc/vl_ma2sc.c +++ b/board/BuS/vl_ma2sc/vl_ma2sc.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include #include @@ -76,25 +75,12 @@ static void vl_ma2sc_nand_hw_init(void) #ifdef CONFIG_MACB static void vl_ma2sc_macb_hw_init(void) { - unsigned long erstl; at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_rstc_t *rstc = (at91_rstc_t *) ATMEL_BASE_RSTC; + /* Enable clock */ writel(1 << ATMEL_ID_EMAC, &pmc->pcer); - erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK; - - /* Need to reset PHY -> 500ms reset */ - writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0x0D) | - AT91_RSTC_MR_URSTEN, &rstc->mr); - - writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr); - /* Wait for end hardware reset */ - while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) - ; - - /* Restore NRST value */ - writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr); + at91_phy_reset(); at91_macb_hw_init(); } diff --git a/board/afeb9260/afeb9260.c b/board/afeb9260/afeb9260.c index e1b1c10..ea9575d 100644 --- a/board/afeb9260/afeb9260.c +++ b/board/afeb9260/afeb9260.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include @@ -67,8 +66,6 @@ static void afeb9260_macb_hw_init(void) { struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; - struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC; - unsigned long erstl; /* Enable EMAC clock */ @@ -94,20 +91,7 @@ static void afeb9260_macb_hw_init(void) pin_to_mask(AT91_PIN_PA28), &pioa->pudr); - erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK; - - /* Need to reset PHY -> 500ms reset */ - writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) | - AT91_RSTC_MR_URSTEN, &rstc->mr); - writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr); - - /* Wait for end hardware reset */ - while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) - ; - /* Restore NRST value */ - writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, - &rstc->mr); - + at91_phy_reset(); /* Re-enable pull-up */ writel(pin_to_mask(AT91_PIN_PA14) | diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c index 263de49..7f14af1 100644 --- a/board/atmel/at91sam9260ek/at91sam9260ek.c +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include @@ -73,8 +72,6 @@ static void at91sam9260ek_macb_hw_init(void) { struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; - struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC; - unsigned long erstl; /* Enable EMAC clock */ writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); @@ -98,21 +95,7 @@ static void at91sam9260ek_macb_hw_init(void) pin_to_mask(AT91_PIN_PA28), &pioa->pudr); - erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK; - - /* Need to reset PHY -> 500ms reset */ - writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) | - AT91_RSTC_MR_URSTEN, &rstc->mr); - - writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr); - - /* Wait for end hardware reset */ - while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) - ; - - /* Restore NRST value */ - writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, - &rstc->mr); + at91_phy_reset(); /* Re-enable pull-up */ writel(pin_to_mask(AT91_PIN_PA14) | diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c index 2e9246f..d42a173 100644 --- a/board/atmel/at91sam9263ek/at91sam9263ek.c +++ b/board/atmel/at91sam9263ek/at91sam9263ek.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include @@ -82,10 +81,9 @@ static void at91sam9263ek_nand_hw_init(void) #ifdef CONFIG_MACB static void at91sam9263ek_macb_hw_init(void) { - unsigned long erstl; at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - at91_rstc_t *rstc = (at91_rstc_t *) ATMEL_BASE_RSTC; + /* Enable clock */ writel(1 << ATMEL_ID_EMAC, &pmc->pcer); @@ -97,23 +95,10 @@ static void at91sam9263ek_macb_hw_init(void) * * PHY has internal pull-down */ - writel(1 << 25, &pio->pioc.pudr); writel((1 << 25) | (1 <<26), &pio->pioe.pudr); - erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK; - - /* Need to reset PHY -> 500ms reset */ - writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0x0D) | - AT91_RSTC_MR_URSTEN, &rstc->mr); - - writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr); - /* Wait for end hardware reset */ - while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) - ; - - /* Restore NRST value */ - writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr); + at91_phy_reset(); /* Re-enable pull-up */ writel(1 << 25, &pio->pioc.puer); diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c index 6a071f6..b7e2efd 100644 --- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c +++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include @@ -88,8 +87,6 @@ static void at91sam9m10g45ek_macb_hw_init(void) { struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; - struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC; - unsigned long erstl; /* Enable clock */ writel(1 << ATMEL_ID_EMAC, &pmc->pcer); @@ -107,21 +104,7 @@ static void at91sam9m10g45ek_macb_hw_init(void) pin_to_mask(AT91_PIN_PA13), &pioa->pudr); - erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK; - - /* Need to reset PHY -> 500ms reset */ - writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) | - AT91_RSTC_MR_URSTEN, &rstc->mr); - - writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr); - - /* Wait for end hardware reset */ - while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) - ; - - /* Restore NRST value */ - writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, - &rstc->mr); + at91_phy_reset(); /* Re-enable pull-up */ writel(pin_to_mask(AT91_PIN_PA15) | diff --git a/board/bluewater/snapper9260/snapper9260.c b/board/bluewater/snapper9260/snapper9260.c index 8a6919d..bfde129 100644 --- a/board/bluewater/snapper9260/snapper9260.c +++ b/board/bluewater/snapper9260/snapper9260.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include @@ -31,8 +30,6 @@ static void macb_hw_init(void) { struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; - struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC; - unsigned long erstl; /* Enable clock */ writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); @@ -54,18 +51,7 @@ static void macb_hw_init(void) /* Enable ethernet power */ pca953x_set_val(0x28, IO_EXP_ETH_POWER, 0); - /* Need to reset PHY -> 500ms reset */ - erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK; - writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) | - AT91_RSTC_MR_URSTEN, &rstc->mr); - writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr); - - /* Wait for end hardware reset */ - while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) - ; - - /* Restore NRST value */ - writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr); + at91_phy_reset(); /* Bring the ethernet out of reset */ pca953x_set_val(0x28, IO_EXP_ETH_RESET, 1); diff --git a/board/calao/sbc35_a9g20/sbc35_a9g20.c b/board/calao/sbc35_a9g20/sbc35_a9g20.c index ecf261c..2074a93 100644 --- a/board/calao/sbc35_a9g20/sbc35_a9g20.c +++ b/board/calao/sbc35_a9g20/sbc35_a9g20.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) @@ -77,8 +76,6 @@ static void sbc35_a9g20_macb_hw_init(void) { struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; - struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC; - unsigned long erstl; /* Enable EMAC clock */ writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); @@ -102,21 +99,7 @@ static void sbc35_a9g20_macb_hw_init(void) pin_to_mask(AT91_PIN_PA28), &pioa->pudr); - erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK; - - /* Need to reset PHY -> 500ms reset */ - writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) | - AT91_RSTC_MR_URSTEN, &rstc->mr); - - writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr); - - /* Wait for end hardware reset */ - while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) - ; - - /* Restore NRST value */ - writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, - &rstc->mr); + at91_phy_reset(); /* Re-enable pull-up */ writel(pin_to_mask(AT91_PIN_PA14) | diff --git a/board/eukrea/cpu9260/cpu9260.c b/board/eukrea/cpu9260/cpu9260.c index 5e1524e..274f72d 100644 --- a/board/eukrea/cpu9260/cpu9260.c +++ b/board/eukrea/cpu9260/cpu9260.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include @@ -89,29 +88,14 @@ static void cpu9260_nand_hw_init(void) #ifdef CONFIG_MACB static void cpu9260_macb_hw_init(void) { - unsigned long rstcmr; at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_rstc_t *rstc = (at91_rstc_t *) ATMEL_BASE_RSTC; /* Enable clock */ writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); at91_set_pio_pullup(AT91_PIO_PORTA, 17, 1); - rstcmr = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK; - - /* Need to reset PHY -> 500ms reset */ - writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0xD) | - AT91_RSTC_MR_URSTEN, &rstc->mr); - - writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr); - - /* Wait for end hardware reset */ - while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) - ; - - /* Restore NRST value */ - writel(AT91_RSTC_KEY | rstcmr | AT91_RSTC_MR_URSTEN, &rstc->mr); + at91_phy_reset(); at91_macb_hw_init(); } diff --git a/board/taskit/stamp9g20/stamp9g20.c b/board/taskit/stamp9g20/stamp9g20.c index 704a63b..27cdf77 100644 --- a/board/taskit/stamp9g20/stamp9g20.c +++ b/board/taskit/stamp9g20/stamp9g20.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include @@ -67,8 +66,6 @@ static void stamp9G20_nand_hw_init(void) static void stamp9G20_macb_hw_init(void) { struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; - struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC; - unsigned long erstl; /* Enable the PHY Chip via PA26 on the Stamp 2 Adaptor */ at91_set_gpio_output(AT91_PIN_PA26, 0); @@ -91,33 +88,7 @@ static void stamp9G20_macb_hw_init(void) pin_to_mask(AT91_PIN_PA28), &pioa->pudr); - erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK; - - /* Need to reset PHY -> 500ms reset */ - writel(AT91_RSTC_KEY | (AT91_RSTC_MR_ERSTL(13) & - ~AT91_RSTC_MR_URSTEN), &rstc->mr); - writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr); - - /* Wait for end of hardware reset */ - unsigned long start = get_timer(0); - unsigned long timeout = 1000; /* 1000ms */ - - while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) { - - /* avoid shutdown by watchdog */ - WATCHDOG_RESET(); - mdelay(10); - - /* timeout for not getting stuck in an endless loop */ - if (get_timer(start) >= timeout) { - puts("*** ERROR: Timeout waiting for PHY reset!\n"); - break; - }; - }; - - /* Restore NRST value */ - writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, - &rstc->mr); + at91_phy_reset(); /* Re-enable pull-up */ writel(pin_to_mask(AT91_PIN_PA14) | diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h index 5e71898..14bac15 100644 --- a/include/configs/afeb9260.h +++ b/include/configs/afeb9260.h @@ -106,7 +106,7 @@ /* Ethernet */ #define CONFIG_MACB #define CONFIG_RESET_PHY_R - +#define CONFIG_AT91_WANTS_COMMON_PHY #define CONFIG_NET_RETRY_COUNT 20 /* USB */ diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index 1c4bb81..73917b0 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -181,6 +181,7 @@ #define CONFIG_RMII 1 #define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_RESET_PHY_R 1 +#define CONFIG_AT91_WANTS_COMMON_PHY /* USB */ #define CONFIG_USB_ATMEL diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index 0a1969d..b9aa036 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -275,6 +275,7 @@ #define CONFIG_RMII 1 #define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_RESET_PHY_R 1 +#define CONFIG_AT91_WANTS_COMMON_PHY /* USB */ #define CONFIG_USB_ATMEL diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 395d44e..0a4c781 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -119,6 +119,7 @@ #define CONFIG_RMII #define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_RESET_PHY_R +#define CONFIG_AT91_WANTS_COMMON_PHY /* USB */ #define CONFIG_USB_EHCI diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h index ccf36a5..22c0a09 100644 --- a/include/configs/cpu9260.h +++ b/include/configs/cpu9260.h @@ -310,6 +310,7 @@ #define CONFIG_RMII #define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_MACB_SEARCH_PHY +#define CONFIG_AT91_WANTS_COMMON_PHY /* LEDS */ /* Status LED */ diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h index cbcd4e1..7e16c45 100644 --- a/include/configs/sbc35_a9g20.h +++ b/include/configs/sbc35_a9g20.h @@ -115,6 +115,7 @@ #define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_RESET_PHY_R #define CONFIG_MACB_SEARCH_PHY +#define CONFIG_AT91_WANTS_COMMON_PHY /* USB */ #define CONFIG_USB_ATMEL diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h index 7ef5125..94a65c4 100644 --- a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h @@ -59,6 +59,7 @@ #define CONFIG_RMII #define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_RESET_PHY_R +#define CONFIG_AT91_WANTS_COMMON_PHY #define CONFIG_TFTP_PORT #define CONFIG_TFTP_TSIZE diff --git a/include/configs/stamp9g20.h b/include/configs/stamp9g20.h index 248e657..51339b1 100644 --- a/include/configs/stamp9g20.h +++ b/include/configs/stamp9g20.h @@ -145,6 +145,7 @@ #ifdef CONFIG_MACB # define CONFIG_RMII /* use reduced MII inteface */ # define CONFIG_NET_RETRY_COUNT 20 /* # of DHCP/BOOTP retries */ +#define CONFIG_AT91_WANTS_COMMON_PHY /* BOOTP and DHCP options */ # define CONFIG_BOOTP_BOOTFILESIZE diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h index 1489080..aacb84c 100644 --- a/include/configs/vl_ma2sc.h +++ b/include/configs/vl_ma2sc.h @@ -330,6 +330,7 @@ #define CONFIG_RMII #define CONFIG_NET_MULTI #define CONFIG_NET_RETRY_COUNT 5 +#define CONFIG_AT91_WANTS_COMMON_PHY #define CONFIG_OVERWRITE_ETHADDR_ONCE -- cgit v0.10.2