From f16c1da9577f06c5fc08651a4065537407de4635 Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Sat, 6 Jan 2007 15:56:13 +0100
Subject: [PATCH] Update ALPR board files

This update brings the ALPR board support to the newest version.
It also fixes a problem with the NAND driver.

Signed-off-by: Stefan Roese <sr@denx.de>

diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c
index 2389561..5abc87d 100644
--- a/board/prodrive/alpr/alpr.c
+++ b/board/prodrive/alpr/alpr.c
@@ -77,8 +77,12 @@ int board_early_init_f (void)
 	mtdcr (uicb0tr, 0x00000000); /* */
 	mtdcr (uicb0vr, 0x00000001); /* */
 
+	/* Setup shutdown/SSD empty interrupt as inputs */
+	out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_SHUTDOWN | CFG_GPIO_SSD_EMPTY));
+	out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_SHUTDOWN | CFG_GPIO_SSD_EMPTY));
+
 	/* Setup GPIO/IRQ multiplexing */
-	mtsdr(sdr_pfc0, 0x01a03e00);
+	mtsdr(sdr_pfc0, 0x01a33e00);
 
 	return 0;
 }
@@ -105,26 +109,11 @@ int last_stage_init(void)
 
 static int board_rev(void)
 {
-	int rev;
-	u32 pfc0;
-
-	/* Setup GPIO14 & 15 as GPIO */
-	mfsdr(sdr_pfc0, pfc0);
-	pfc0 |= CFG_GPIO_REV0 | CFG_GPIO_REV1;
-	mtsdr(sdr_pfc0, pfc0);
-
 	/* Setup as input */
-	out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV0));
-	out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV0));
-
-	rev = (in32(GPIO0_IR) >> 16) & 0x3;
-
-	/* Setup GPIO14 & 15 as non GPIO again */
-	mfsdr(sdr_pfc0, pfc0);
-	pfc0 &= ~(CFG_GPIO_REV0 | CFG_GPIO_REV1);
-	mtsdr(sdr_pfc0, pfc0);
+	out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV1));
+	out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV1));
 
-	return rev;
+	return (in32(GPIO0_IR) >> 16) & 0x3;
 }
 
 int checkboard (void)
diff --git a/board/prodrive/alpr/nand.c b/board/prodrive/alpr/nand.c
index e63c921..d66b088 100644
--- a/board/prodrive/alpr/nand.c
+++ b/board/prodrive/alpr/nand.c
@@ -154,7 +154,7 @@ static int alpr_nand_dev_ready(struct mtd_info *mtd)
 	return 1;
 }
 
-void board_nand_init(struct nand_chip *nand)
+int board_nand_init(struct nand_chip *nand)
 {
 	alpr_ndfc = (struct alpr_ndfc_regs *)CFG_NAND_BASE;
 
@@ -169,5 +169,7 @@ void board_nand_init(struct nand_chip *nand)
 	nand->read_buf   = alpr_nand_read_buf;
 	nand->verify_buf = alpr_nand_verify_buf;
 	nand->dev_ready  = alpr_nand_dev_ready;
+
+	return 0;
 }
 #endif
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index bbe6b76..49027da 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -166,8 +166,23 @@
 		"cp.b 100000 fffc0000 40000;"			        \
 		"setenv filesize;saveenv\0"				\
 	"upd=run load;run update\0"					\
+	"ethprime=ppc_4xx_eth3\0"					\
+	"ethact=ppc_4xx_eth3\0"						\
+	"autoload=no\0"							\
+	"ipconfig=dhcp;setenv serverip 11.0.0.152\0"			\
+	"actkernel=kernel2\0"						\
+	"load_fpga=fpga load 0 ffe00000 10dd9a\0"			\
+	"mtdargs=setenv bootargs root=/dev/mtdblock6 rw "		\
+		"rootfstype=jffs2 init=/sbin/init\0"			\
+	"kernel1_mtd=nand read 200000 0 200000;run mtdargs addip addtty"\
+		";bootm 200000\0"					\
+	"kernel2_mtd=nand read 200000 200000 200000;run mtdargs addip "	\
+		"addtty;bootm 200000\0"					\
+	"kernel1=run ipconfig load_fpga kernel1_mtd\0"			\
+	"kernel2=run ipconfig load_fpga kernel2_mtd\0"			\
 	""
-#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#define CONFIG_BOOTCOMMAND	"run kernel2"
 
 #define CONFIG_BOOTDELAY	2	/* autoboot after 5 seconds	*/
 
@@ -291,6 +306,8 @@
 /*-----------------------------------------------------------------------
  * Definitions for GPIO setup
  *-----------------------------------------------------------------------*/
+#define CFG_GPIO_SHUTDOWN	(0x80000000 >> 6)
+#define CFG_GPIO_SSD_EMPTY	(0x80000000 >> 9)
 #define CFG_GPIO_EREADY		(0x80000000 >> 26)
 #define CFG_GPIO_REV0		(0x80000000 >> 14)
 #define CFG_GPIO_REV1		(0x80000000 >> 15)
-- 
cgit v0.10.2