From 29fc6f24926e2c9d37dbbc37a2e2df2eced4c678 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 24 Feb 2015 11:45:08 +0900 Subject: ARM: remove a320evb board support This is still a non-generic board. Signed-off-by: Masahiro Yamada Cc: Po-Yu Chuang Acked-by: Marek Vasut diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index db31be9..f6a1720 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -73,10 +73,6 @@ config TARGET_INTEGRATORCP_CM920T bool "Support integratorcp_cm920t" select CPU_ARM920T -config TARGET_A320EVB - bool "Support a320evb" - select CPU_ARM920T - config ARCH_AT91 bool "Atmel AT91" @@ -770,7 +766,6 @@ source "board/denx/m28evk/Kconfig" source "board/denx/m53evk/Kconfig" source "board/embest/mx6boards/Kconfig" source "board/esg/ima3-mx53/Kconfig" -source "board/faraday/a320evb/Kconfig" source "board/freescale/ls2085a/Kconfig" source "board/freescale/ls1021aqds/Kconfig" source "board/freescale/ls1021atwr/Kconfig" diff --git a/arch/arm/cpu/arm920t/Makefile b/arch/arm/cpu/arm920t/Makefile index 29a350c..6582938 100644 --- a/arch/arm/cpu/arm920t/Makefile +++ b/arch/arm/cpu/arm920t/Makefile @@ -10,7 +10,6 @@ extra-y = start.o obj-y += cpu.o obj-$(CONFIG_USE_IRQ) += interrupts.o -obj-$(if $(filter a320,$(SOC)),y) += a320/ obj-$(CONFIG_EP93XX) += ep93xx/ obj-$(CONFIG_IMX) += imx/ obj-$(CONFIG_S3C24X0) += s3c24x0/ diff --git a/arch/arm/cpu/arm920t/a320/Makefile b/arch/arm/cpu/arm920t/a320/Makefile deleted file mode 100644 index bbdab58..0000000 --- a/arch/arm/cpu/arm920t/a320/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += reset.o -obj-y += timer.o diff --git a/arch/arm/cpu/arm920t/a320/reset.S b/arch/arm/cpu/arm920t/a320/reset.S deleted file mode 100644 index 81f9dc9..0000000 --- a/arch/arm/cpu/arm920t/a320/reset.S +++ /dev/null @@ -1,10 +0,0 @@ -/* - * (C) Copyright 2009 Faraday Technology - * Po-Yu Chuang - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -.global reset_cpu -reset_cpu: - b reset_cpu diff --git a/arch/arm/cpu/arm920t/a320/timer.c b/arch/arm/cpu/arm920t/a320/timer.c deleted file mode 100644 index 1ac5b60..0000000 --- a/arch/arm/cpu/arm920t/a320/timer.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * (C) Copyright 2009 Faraday Technology - * Po-Yu Chuang - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -#define TIMER_CLOCK 32768 -#define TIMER_LOAD_VAL 0xffffffff - -static inline unsigned long long tick_to_time(unsigned long long tick) -{ - tick *= CONFIG_SYS_HZ; - do_div(tick, gd->arch.timer_rate_hz); - - return tick; -} - -static inline unsigned long long usec_to_tick(unsigned long long usec) -{ - usec *= gd->arch.timer_rate_hz; - do_div(usec, 1000000); - - return usec; -} - -int timer_init(void) -{ - struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE; - unsigned int cr; - - debug("%s()\n", __func__); - - /* disable timers */ - writel(0, &tmr->cr); - - /* use 32768Hz oscillator for RTC, WDT, TIMER */ - ftpmu010_32768osc_enable(); - - /* setup timer */ - writel(TIMER_LOAD_VAL, &tmr->timer3_load); - writel(TIMER_LOAD_VAL, &tmr->timer3_counter); - writel(0, &tmr->timer3_match1); - writel(0, &tmr->timer3_match2); - - /* we don't want timer to issue interrupts */ - writel(FTTMR010_TM3_MATCH1 | - FTTMR010_TM3_MATCH2 | - FTTMR010_TM3_OVERFLOW, - &tmr->interrupt_mask); - - cr = readl(&tmr->cr); - cr |= FTTMR010_TM3_CLOCK; /* use external clock */ - cr |= FTTMR010_TM3_ENABLE; - writel(cr, &tmr->cr); - - gd->arch.timer_rate_hz = TIMER_CLOCK; - gd->arch.tbu = gd->arch.tbl = 0; - - return 0; -} - -/* - * Get the current 64 bit timer tick count - */ -unsigned long long get_ticks(void) -{ - struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE; - ulong now = TIMER_LOAD_VAL - readl(&tmr->timer3_counter); - - /* increment tbu if tbl has rolled over */ - if (now < gd->arch.tbl) - gd->arch.tbu++; - gd->arch.tbl = now; - return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl; -} - -void __udelay(unsigned long usec) -{ - unsigned long long start; - ulong tmo; - - start = get_ticks(); /* get current timestamp */ - tmo = usec_to_tick(usec); /* convert usecs to ticks */ - while ((get_ticks() - start) < tmo) - ; /* loop till time has passed */ -} - -/* - * get_timer(base) can be used to check for timeouts or - * to measure elasped time relative to an event: - * - * ulong start_time = get_timer(0) sets start_time to the current - * time value. - * get_timer(start_time) returns the time elapsed since then. - * - * The time is used in CONFIG_SYS_HZ units! - */ -ulong get_timer(ulong base) -{ - return tick_to_time(get_ticks()) - base; -} - -/* - * Return the number of timer ticks per second. - */ -ulong get_tbclk(void) -{ - return gd->arch.timer_rate_hz; -} diff --git a/arch/arm/include/asm/arch-a320/a320.h b/arch/arm/include/asm/arch-a320/a320.h deleted file mode 100644 index f2db8e1..0000000 --- a/arch/arm/include/asm/arch-a320/a320.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * (C) Copyright 2009 Faraday Technology - * Po-Yu Chuang - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __A320_H -#define __A320_H - -/* - * Hardware register bases - */ -#define CONFIG_FTSMC020_BASE 0x90200000 /* Static Memory Controller */ -#define CONFIG_DEBUG_LED 0x902ffffc /* Debug LED */ -#define CONFIG_FTSDMC020_BASE 0x90300000 /* SDRAM Controller */ -#define CONFIG_FTMAC100_BASE 0x90900000 /* Ethernet */ -#define CONFIG_FTPMU010_BASE 0x98100000 /* Power Management Unit */ -#define CONFIG_FTTMR010_BASE 0x98400000 /* Timer */ -#define CONFIG_FTRTC010_BASE 0x98600000 /* Real Time Clock*/ - -#endif /* __A320_H */ diff --git a/board/faraday/a320evb/Kconfig b/board/faraday/a320evb/Kconfig deleted file mode 100644 index 02c42cb..0000000 --- a/board/faraday/a320evb/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_A320EVB - -config SYS_BOARD - default "a320evb" - -config SYS_VENDOR - default "faraday" - -config SYS_SOC - default "a320" - -config SYS_CONFIG_NAME - default "a320evb" - -endif diff --git a/board/faraday/a320evb/MAINTAINERS b/board/faraday/a320evb/MAINTAINERS deleted file mode 100644 index f13b015..0000000 --- a/board/faraday/a320evb/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -A320EVB BOARD -M: Po-Yu Chuang -S: Maintained -F: board/faraday/a320evb/ -F: include/configs/a320evb.h -F: configs/a320evb_defconfig diff --git a/board/faraday/a320evb/Makefile b/board/faraday/a320evb/Makefile deleted file mode 100644 index 518ce3f..0000000 --- a/board/faraday/a320evb/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := a320evb.o -obj-y += lowlevel_init.o diff --git a/board/faraday/a320evb/a320evb.c b/board/faraday/a320evb/a320evb.c deleted file mode 100644 index c42635b..0000000 --- a/board/faraday/a320evb/a320evb.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * (C) Copyright 2009 Faraday Technology - * Po-Yu Chuang - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -#include - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Miscellaneous platform dependent initialisations - */ - -int board_init(void) -{ - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - ftsmc020_init(); /* initialize Flash */ - return 0; -} - -int dram_init(void) -{ - unsigned long sdram_base = PHYS_SDRAM_1; - unsigned long expected_size = PHYS_SDRAM_1_SIZE; - unsigned long actual_size; - - actual_size = get_ram_size((void *)sdram_base, expected_size); - - gd->ram_size = actual_size; - - if (expected_size != actual_size) - printf("Warning: Only %lu of %lu MiB SDRAM is working\n", - actual_size >> 20, expected_size >> 20); - - return 0; -} - -int board_eth_init(bd_t *bd) -{ - return ftmac100_initialize(bd); -} - -ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info) -{ - if (banknum == 0) { /* non-CFI boot flash */ - info->portwidth = FLASH_CFI_8BIT; - info->chipwidth = FLASH_CFI_BY8; - info->interface = FLASH_CFI_X8; - return 1; - } else - return 0; -} diff --git a/board/faraday/a320evb/lowlevel_init.S b/board/faraday/a320evb/lowlevel_init.S deleted file mode 100644 index d366260..0000000 --- a/board/faraday/a320evb/lowlevel_init.S +++ /dev/null @@ -1,106 +0,0 @@ -/* - * (C) Copyright 2009 Faraday Technology - * Po-Yu Chuang - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -#include -#include - -/* - * parameters for the SDRAM controller - */ -#define TP0_A (CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_TP0) -#define TP1_A (CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_TP1) -#define CR_A (CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_CR) -#define B0_BSR_A (CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_BANK0_BSR) -#define ACR_A (CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_ACR) - -#define TP0_D CONFIG_SYS_FTSDMC020_TP0 -#define TP1_D CONFIG_SYS_FTSDMC020_TP1 -#define CR_D1 FTSDMC020_CR_IPREC -#define CR_D2 FTSDMC020_CR_ISMR -#define CR_D3 FTSDMC020_CR_IREF - -#define B0_BSR_D (CONFIG_SYS_FTSDMC020_BANK0_BSR | \ - FTSDMC020_BANK_BASE(PHYS_SDRAM_1)) -#define ACR_D FTSDMC020_ACR_TOC(0x18) - -/* - * numeric 7 segment display - */ -.macro led, num - write32 CONFIG_DEBUG_LED, \num -.endm - -/* - * Waiting for SDRAM to set up - */ -.macro wait_sdram - ldr r0, =CONFIG_FTSDMC020_BASE -1: - ldr r1, [r0, #FTSDMC020_OFFSET_CR] - cmp r1, #0 - bne 1b -.endm - -.globl lowlevel_init -lowlevel_init: - mov r11, lr - - led 0x0 - - bl init_sdmc - - led 0x1 - - /* everything is fine now */ - mov lr, r11 - mov pc, lr - -/* - * memory initialization - */ -init_sdmc: - led 0x10 - - /* set SDRAM register */ - - write32 TP0_A, TP0_D - led 0x11 - - write32 TP1_A, TP1_D - led 0x12 - - /* set to precharge */ - write32 CR_A, CR_D1 - led 0x13 - - wait_sdram - led 0x14 - - /* set mode register */ - write32 CR_A, CR_D2 - led 0x15 - - wait_sdram - led 0x16 - - /* set to refresh */ - write32 CR_A, CR_D3 - led 0x17 - - wait_sdram - led 0x18 - - write32 B0_BSR_A, B0_BSR_D - led 0x19 - - write32 ACR_A, ACR_D - led 0x1a - - mov pc, lr diff --git a/configs/a320evb_defconfig b/configs/a320evb_defconfig deleted file mode 100644 index 5ebf5e6..0000000 --- a/configs/a320evb_defconfig +++ /dev/null @@ -1,2 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_A320EVB=y diff --git a/doc/README.scrapyard b/doc/README.scrapyard index aa9ed41..1528b9b 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +a320evb arm arm920t - - Po-Yu Chuang cm4008 arm arm920t - - Greg Ungerer cm41xx arm arm920t - - dkb arm arm926ejs - - Lei Wen diff --git a/include/configs/a320evb.h b/include/configs/a320evb.h deleted file mode 100644 index 0d3cf36..0000000 --- a/include/configs/a320evb.h +++ /dev/null @@ -1,211 +0,0 @@ -/* - * (C) Copyright 2009 Faraday Technology - * Po-Yu Chuang - * - * Configuation settings for the Faraday A320 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include - -/* - * mach-type definition - */ -#define MACH_TYPE_FARADAY 758 -#define CONFIG_MACH_TYPE MACH_TYPE_FARADAY - -/* - * Linux kernel tagged list - */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS - -/* - * CPU and Board Configuration Options - */ -#undef CONFIG_SKIP_LOWLEVEL_INIT - -/* - * Power Management Unit - */ -#define CONFIG_FTPMU010_POWER - -/* - * Timer - */ - -/* - * Real Time Clock - */ -#define CONFIG_RTC_FTRTC010 - -/* - * Serial console configuration - */ - -/* FTUART is a high speed NS 16C550A compatible UART */ -#define CONFIG_BAUDRATE 38400 -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_COM1 0x98200000 -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_CLK 18432000 - -/* - * Ethernet - */ -#define CONFIG_FTMAC100 - -#define CONFIG_BOOTDELAY 3 - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DATE -#define CONFIG_CMD_PING - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "A320 # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) - -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 - -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) - -/* - * SDRAM controller configuration - */ -#define CONFIG_SYS_FTSDMC020_TP0 (FTSDMC020_TP0_TRAS(2) | \ - FTSDMC020_TP0_TRP(1) | \ - FTSDMC020_TP0_TRCD(1) | \ - FTSDMC020_TP0_TRF(3) | \ - FTSDMC020_TP0_TWR(1) | \ - FTSDMC020_TP0_TCL(2)) - -#define CONFIG_SYS_FTSDMC020_TP1 (FTSDMC020_TP1_INI_PREC(4) | \ - FTSDMC020_TP1_INI_REFT(8) | \ - FTSDMC020_TP1_REF_INTV(0x180)) - -#define CONFIG_SYS_FTSDMC020_BANK0_BSR (FTSDMC020_BANK_ENABLE | \ - FTSDMC020_BANK_DDW_X16 | \ - FTSDMC020_BANK_DSZ_256M | \ - FTSDMC020_BANK_MBW_32 | \ - FTSDMC020_BANK_SIZE_64M) - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ - GENERATED_GBL_DATA_SIZE) - -/* - * Load address and memory test area should agree with - * board/faraday/a320/config.mk. Be careful not to overwrite U-boot itself. - */ -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x2000000) - -/* memtest works on 63 MB in DRAM */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 -#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x3F00000) - -#define CONFIG_SYS_TEXT_BASE 0 - -/* - * Static memory controller configuration - */ - -#define CONFIG_FTSMC020 -#include - -#define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \ - FTSMC020_BANK_BASE(PHYS_FLASH_1) | \ - FTSMC020_BANK_SIZE_1M | \ - FTSMC020_BANK_MBW_8) - -#define FTSMC020_BANK0_TIMING (FTSMC020_TPR_RBE | \ - FTSMC020_TPR_AST(3) | \ - FTSMC020_TPR_CTW(3) | \ - FTSMC020_TPR_ATI(0xf) | \ - FTSMC020_TPR_AT2(3) | \ - FTSMC020_TPR_WTC(3) | \ - FTSMC020_TPR_AHT(3) | \ - FTSMC020_TPR_TRNA(0xf)) - -#define FTSMC020_BANK1_CONFIG (FTSMC020_BANK_ENABLE | \ - FTSMC020_BANK_BASE(PHYS_FLASH_2) | \ - FTSMC020_BANK_SIZE_32M | \ - FTSMC020_BANK_MBW_32) - -#define FTSMC020_BANK1_TIMING (FTSMC020_TPR_AST(3) | \ - FTSMC020_TPR_CTW(3) | \ - FTSMC020_TPR_ATI(0xf) | \ - FTSMC020_TPR_AT2(3) | \ - FTSMC020_TPR_WTC(3) | \ - FTSMC020_TPR_AHT(3) | \ - FTSMC020_TPR_TRNA(0xf)) - -#define CONFIG_SYS_FTSMC020_CONFIGS { \ - { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \ - { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \ -} - -/* - * FLASH and environment organization - */ - -/* use CFI framework */ -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER - -/* support JEDEC */ -#define CONFIG_FLASH_CFI_LEGACY -#define CONFIG_SYS_FLASH_LEGACY_512Kx8 - -#define PHYS_FLASH_1 0x00000000 -#define PHYS_FLASH_2 0x00400000 -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2, } - -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 - -/* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 - -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -#undef CONFIG_SYS_FLASH_EMPTY_INFO - -/* environments */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) -#define CONFIG_ENV_SIZE 0x20000 - -#endif /* __CONFIG_H */ -- cgit v0.10.2