From 27326c7ee269ff351bba8c2461e19f29d66b6a3a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Heiko=20St=C3=BCbner?= Date: Sat, 18 Feb 2017 19:46:21 +0100 Subject: dm: allow limiting pre-reloc markings to spl or tpl Right now the u-boot,dm-pre-reloc flag will make each marked node always appear in both spl and tpl. But systems needing an additional tpl might have special constraints for each, like the spl needing to be very tiny. So introduce two additional flags to mark nodes for only spl or tpl environments and introduce a function dm_fdt_pre_reloc to automate the necessary checks in code instances checking for pre-relocation flags. The behaviour of the original flag stays untouched and still marks a node for both spl and tpl. Signed-off-by: Heiko Stuebner Reviewed-by: Simon Glass Tested-by: Kever Yang diff --git a/doc/driver-model/README.txt b/doc/driver-model/README.txt index fea324e..0853477 100644 --- a/doc/driver-model/README.txt +++ b/doc/driver-model/README.txt @@ -825,6 +825,10 @@ drivers marked with DM_FLAG_PRE_RELOC or the device tree 'u-boot,dm-pre-reloc' flag are initialised prior to relocation. This helps to reduce the driver model overhead. +It is possible to limit this to specific relocation steps, by using +the more specialized 'u-boot,dm-spl' and 'u-boot,dm-tpl' flags +in the devicetree. + Then post relocation we throw that away and re-init driver model again. For drivers which require some sort of continuity between pre- and post-relocation devices, we can provide access to the pre-relocation diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c index c73156a..fcd693a 100644 --- a/drivers/clk/at91/pmc.c +++ b/drivers/clk/at91/pmc.c @@ -10,6 +10,7 @@ #include #include #include +#include #include "pmc.h" DECLARE_GLOBAL_DATA_PTR; @@ -56,7 +57,7 @@ int at91_clk_sub_device_bind(struct udevice *dev, const char *drv_name) offset > 0; offset = fdt_next_subnode(fdt, offset)) { if (pre_reloc_only && - !fdt_getprop(fdt, offset, "u-boot,dm-pre-reloc", NULL)) + !dm_fdt_pre_reloc(fdt, offset)) continue; /* * If this node has "compatible" property, this is not diff --git a/drivers/core/root.c b/drivers/core/root.c index 175fd3f..93ab568 100644 --- a/drivers/core/root.c +++ b/drivers/core/root.c @@ -205,7 +205,7 @@ int dm_scan_fdt_node(struct udevice *parent, const void *blob, int offset, offset > 0; offset = fdt_next_subnode(blob, offset)) { if (pre_reloc_only && - !fdt_getprop(blob, offset, "u-boot,dm-pre-reloc", NULL)) + !dm_fdt_pre_reloc(blob, offset)) continue; if (!fdtdec_get_is_enabled(blob, offset)) { dm_dbg(" - ignoring disabled device\n"); diff --git a/drivers/core/util.c b/drivers/core/util.c index e01dd06..bd4de7a 100644 --- a/drivers/core/util.c +++ b/drivers/core/util.c @@ -5,6 +5,7 @@ */ #include +#include #include void dm_warn(const char *fmt, ...) @@ -35,3 +36,27 @@ int list_count_items(struct list_head *head) return count; } + +int dm_fdt_pre_reloc(const void *blob, int offset) +{ + if (fdt_getprop(blob, offset, "u-boot,dm-pre-reloc", NULL)) + return 1; + +#ifdef CONFIG_TPL_BUILD + if (fdt_getprop(blob, offset, "u-boot,dm-tpl", NULL)) + return 1; +#elif defined(CONFIG_SPL_BUILD) + if (fdt_getprop(blob, offset, "u-boot,dm-spl", NULL)) + return 1; +#else + /* + * In regular builds individual spl and tpl handling both + * count as handled pre-relocation for later second init. + */ + if (fdt_getprop(blob, offset, "u-boot,dm-spl", NULL) || + fdt_getprop(blob, offset, "u-boot,dm-tpl", NULL)) + return 1; +#endif + + return 0; +} diff --git a/drivers/pinctrl/pinctrl-uclass.c b/drivers/pinctrl/pinctrl-uclass.c index 49afe91..9efad06 100644 --- a/drivers/pinctrl/pinctrl-uclass.c +++ b/drivers/pinctrl/pinctrl-uclass.c @@ -12,6 +12,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -131,7 +132,7 @@ static int pinconfig_post_bind(struct udevice *dev) offset > 0; offset = fdt_next_subnode(fdt, offset)) { if (pre_reloc_only && - !fdt_getprop(fdt, offset, "u-boot,dm-pre-reloc", NULL)) + !dm_fdt_pre_reloc(fdt, offset)) continue; /* * If this node has "compatible" property, this is not diff --git a/include/dm/util.h b/include/dm/util.h index 15daa3d..32060ab 100644 --- a/include/dm/util.h +++ b/include/dm/util.h @@ -48,4 +48,30 @@ static inline void dm_dump_devres(void) } #endif +/** + * Check if a dt node should be or was bound before relocation. + * + * Devicetree nodes can be marked as needed to be bound + * in the loader stages via special devicetree properties. + * + * Before relocation this function can be used to check if nodes + * are required in either SPL or TPL stages. + * + * After relocation and jumping into the real U-Boot binary + * it is possible to determine if a node was bound in one of + * SPL/TPL stages. + * + * There are 3 settings currently in use + * - + * - u-boot,dm-pre-reloc: legacy and indicates any of TPL or SPL + * Existing platforms only use it to indicate nodes needee in + * SPL. Should probably be replaced by u-boot,dm-spl for + * existing platforms. + * @blob: devicetree + * @offset: node offset + * + * Returns true if node is needed in SPL/TL, false otherwise. + */ +int dm_fdt_pre_reloc(const void *blob, int offset); + #endif diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl index b52f996..5370648 100644 --- a/scripts/Makefile.spl +++ b/scripts/Makefile.spl @@ -215,8 +215,13 @@ $(obj)/$(SPL_BIN)-pad.bin: $(obj)/$(SPL_BIN) # 'u-boot,dm-pre-reloc' property and thus are not needed by SPL. The second # pass removes various unused properties from the remaining nodes. # The output is typically a much smaller device tree file. +ifeq ($(CONFIG_TPL_BUILD),y) +fdtgrep_props := -b u-boot,dm-pre-reloc -b u-boot,dm-tpl +else +fdtgrep_props := -b u-boot,dm-pre-reloc -b u-boot,dm-spl +endif quiet_cmd_fdtgrep = FDTGREP $@ - cmd_fdtgrep = $(objtree)/tools/fdtgrep -b u-boot,dm-pre-reloc -RT $< \ + cmd_fdtgrep = $(objtree)/tools/fdtgrep $(fdtgrep_props) -RT $< \ -n /chosen -O dtb | \ $(objtree)/tools/fdtgrep -r -O dtb - -o $@ \ $(addprefix -P ,$(subst $\",,$(CONFIG_OF_SPL_REMOVE_PROPS))) diff --git a/tools/dtoc/dtoc.py b/tools/dtoc/dtoc.py index 6df7b0d..bf67ec8 100755 --- a/tools/dtoc/dtoc.py +++ b/tools/dtoc/dtoc.py @@ -30,6 +30,8 @@ PROP_IGNORE_LIST = [ "status", 'phandle', 'u-boot,dm-pre-reloc', + 'u-boot,dm-tpl', + 'u-boot,dm-spl', ] # C type declarations for the tyues we support -- cgit v0.10.2