From 38517a7821d531aabe8e14a3806a7913b14a57b2 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Thu, 27 Oct 2011 10:36:46 +0200 Subject: usb:gadget:s5p USB Device Controller (UDC) implementation This commit provides UDC driver support for Samsung's SoC family of processors. Signed-off-by: Lukasz Majewski Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park Cc: Minkyu Kang Cc: Remy Bohmer diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 820ca9b..64b091f 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -26,6 +26,10 @@ include $(TOPDIR)/config.mk LIB := $(obj)libusb_gadget.o # new USB gadget layer dependencies +ifdef CONFIG_USB_GADGET +COBJS-y += epautoconf.o config.o usbstring.o +COBJS-$(CONFIG_USB_GADGET_S3C_UDC_OTG) += s3c_udc_otg.o +endif ifdef CONFIG_USB_ETHER COBJS-y += ether.o epautoconf.o config.o usbstring.o COBJS-$(CONFIG_USB_ETH_RNDIS) += rndis.o diff --git a/drivers/usb/gadget/regs-otg.h b/drivers/usb/gadget/regs-otg.h new file mode 100644 index 0000000..3737e45 --- /dev/null +++ b/drivers/usb/gadget/regs-otg.h @@ -0,0 +1,271 @@ +/* linux/arch/arm/plat-s3c/include/plat/regs-otg.h + * + * Copyright (C) 2004 Herbert Poetzl + * + * Registers remapping: + * Lukasz Majewski + * + * This include file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#ifndef __ASM_ARCH_REGS_USB_OTG_HS_H +#define __ASM_ARCH_REGS_USB_OTG_HS_H + +/* USB2.0 OTG Controller register */ +struct s3c_usbotg_phy { + u32 phypwr; + u32 phyclk; + u32 rstcon; +}; + +/* Device Logical IN Endpoint-Specific Registers */ +struct s3c_dev_in_endp { + u32 diepctl; + u8 res1[4]; + u32 diepint; + u8 res2[4]; + u32 dieptsiz; + u32 diepdma; + u8 res3[4]; + u32 diepdmab; +}; + +/* Device Logical OUT Endpoint-Specific Registers */ +struct s3c_dev_out_endp { + u32 doepctl; + u8 res1[4]; + u32 doepint; + u8 res2[4]; + u32 doeptsiz; + u32 doepdma; + u8 res3[4]; + u32 doepdmab; +}; + +struct ep_fifo { + u32 fifo; + u8 res[4092]; +}; + +/* USB2.0 OTG Controller register */ +struct s3c_usbotg_reg { + /* Core Global Registers */ + u32 gotgctl; /* OTG Control & Status */ + u32 gotgint; /* OTG Interrupt */ + u32 gahbcfg; /* Core AHB Configuration */ + u32 gusbcfg; /* Core USB Configuration */ + u32 grstctl; /* Core Reset */ + u32 gintsts; /* Core Interrupt */ + u32 gintmsk; /* Core Interrupt Mask */ + u32 grxstsr; /* Receive Status Debug Read/Status Read */ + u32 grxstsp; /* Receive Status Debug Pop/Status Pop */ + u32 grxfsiz; /* Receive FIFO Size */ + u32 gnptxfsiz; /* Non-Periodic Transmit FIFO Size */ + u8 res1[216]; + u32 dieptxf[15]; /* Device Periodic Transmit FIFO size register */ + u8 res2[1728]; + /* Device Configuration */ + u32 dcfg; /* Device Configuration Register */ + u32 dctl; /* Device Control */ + u32 dsts; /* Device Status */ + u8 res3[4]; + u32 diepmsk; /* Device IN Endpoint Common Interrupt Mask */ + u32 doepmsk; /* Device OUT Endpoint Common Interrupt Mask */ + u32 daint; /* Device All Endpoints Interrupt */ + u32 daintmsk; /* Device All Endpoints Interrupt Mask */ + u8 res4[224]; + struct s3c_dev_in_endp in_endp[16]; + struct s3c_dev_out_endp out_endp[16]; + u8 res5[768]; + struct ep_fifo ep[16]; +}; + +/*===================================================================== */ +/*definitions related to CSR setting */ + +/* S3C_UDC_OTG_GOTGCTL */ +#define B_SESSION_VALID (0x1<<19) +#define A_SESSION_VALID (0x1<<18) + +/* S3C_UDC_OTG_GAHBCFG */ +#define PTXFE_HALF (0<<8) +#define PTXFE_ZERO (1<<8) +#define NPTXFE_HALF (0<<7) +#define NPTXFE_ZERO (1<<7) +#define MODE_SLAVE (0<<5) +#define MODE_DMA (1<<5) +#define BURST_SINGLE (0<<1) +#define BURST_INCR (1<<1) +#define BURST_INCR4 (3<<1) +#define BURST_INCR8 (5<<1) +#define BURST_INCR16 (7<<1) +#define GBL_INT_UNMASK (1<<0) +#define GBL_INT_MASK (0<<0) + +/* S3C_UDC_OTG_GRSTCTL */ +#define AHB_MASTER_IDLE (1u<<31) +#define CORE_SOFT_RESET (0x1<<0) + +/* S3C_UDC_OTG_GINTSTS/S3C_UDC_OTG_GINTMSK core interrupt register */ +#define INT_RESUME (1u<<31) +#define INT_DISCONN (0x1<<29) +#define INT_CONN_ID_STS_CNG (0x1<<28) +#define INT_OUT_EP (0x1<<19) +#define INT_IN_EP (0x1<<18) +#define INT_ENUMDONE (0x1<<13) +#define INT_RESET (0x1<<12) +#define INT_SUSPEND (0x1<<11) +#define INT_EARLY_SUSPEND (0x1<<10) +#define INT_NP_TX_FIFO_EMPTY (0x1<<5) +#define INT_RX_FIFO_NOT_EMPTY (0x1<<4) +#define INT_SOF (0x1<<3) +#define INT_DEV_MODE (0x0<<0) +#define INT_HOST_MODE (0x1<<1) +#define INT_GOUTNakEff (0x01<<7) +#define INT_GINNakEff (0x01<<6) + +#define FULL_SPEED_CONTROL_PKT_SIZE 8 +#define FULL_SPEED_BULK_PKT_SIZE 64 + +#define HIGH_SPEED_CONTROL_PKT_SIZE 64 +#define HIGH_SPEED_BULK_PKT_SIZE 512 + +#define RX_FIFO_SIZE (1024*4) +#define NPTX_FIFO_SIZE (1024*4) +#define PTX_FIFO_SIZE (1536*1) + +#define DEPCTL_TXFNUM_0 (0x0<<22) +#define DEPCTL_TXFNUM_1 (0x1<<22) +#define DEPCTL_TXFNUM_2 (0x2<<22) +#define DEPCTL_TXFNUM_3 (0x3<<22) +#define DEPCTL_TXFNUM_4 (0x4<<22) + +/* Enumeration speed */ +#define USB_HIGH_30_60MHZ (0x0<<1) +#define USB_FULL_30_60MHZ (0x1<<1) +#define USB_LOW_6MHZ (0x2<<1) +#define USB_FULL_48MHZ (0x3<<1) + +/* S3C_UDC_OTG_GRXSTSP STATUS */ +#define OUT_PKT_RECEIVED (0x2<<17) +#define OUT_TRANSFER_COMPLELTED (0x3<<17) +#define SETUP_TRANSACTION_COMPLETED (0x4<<17) +#define SETUP_PKT_RECEIVED (0x6<<17) +#define GLOBAL_OUT_NAK (0x1<<17) + +/* S3C_UDC_OTG_DCTL device control register */ +#define NORMAL_OPERATION (0x1<<0) +#define SOFT_DISCONNECT (0x1<<1) + +/* S3C_UDC_OTG_DAINT device all endpoint interrupt register */ +#define DAINT_OUT_BIT (16) +#define DAINT_MASK (0xFFFF) + +/* S3C_UDC_OTG_DIEPCTL0/DOEPCTL0 device + control IN/OUT endpoint 0 control register */ +#define DEPCTL_EPENA (0x1<<31) +#define DEPCTL_EPDIS (0x1<<30) +#define DEPCTL_SETD1PID (0x1<<29) +#define DEPCTL_SETD0PID (0x1<<28) +#define DEPCTL_SNAK (0x1<<27) +#define DEPCTL_CNAK (0x1<<26) +#define DEPCTL_STALL (0x1<<21) +#define DEPCTL_TYPE_BIT (18) +#define DEPCTL_TYPE_MASK (0x3<<18) +#define DEPCTL_CTRL_TYPE (0x0<<18) +#define DEPCTL_ISO_TYPE (0x1<<18) +#define DEPCTL_BULK_TYPE (0x2<<18) +#define DEPCTL_INTR_TYPE (0x3<<18) +#define DEPCTL_USBACTEP (0x1<<15) +#define DEPCTL_NEXT_EP_BIT (11) +#define DEPCTL_MPS_BIT (0) +#define DEPCTL_MPS_MASK (0x7FF) + +#define DEPCTL0_MPS_64 (0x0<<0) +#define DEPCTL0_MPS_32 (0x1<<0) +#define DEPCTL0_MPS_16 (0x2<<0) +#define DEPCTL0_MPS_8 (0x3<<0) +#define DEPCTL_MPS_BULK_512 (512<<0) +#define DEPCTL_MPS_INT_MPS_16 (16<<0) + +#define DIEPCTL0_NEXT_EP_BIT (11) + + +/* S3C_UDC_OTG_DIEPMSK/DOEPMSK device IN/OUT endpoint + common interrupt mask register */ +/* S3C_UDC_OTG_DIEPINTn/DOEPINTn device IN/OUT endpoint interrupt register */ +#define BACK2BACK_SETUP_RECEIVED (0x1<<6) +#define INTKNEPMIS (0x1<<5) +#define INTKN_TXFEMP (0x1<<4) +#define NON_ISO_IN_EP_TIMEOUT (0x1<<3) +#define CTRL_OUT_EP_SETUP_PHASE_DONE (0x1<<3) +#define AHB_ERROR (0x1<<2) +#define EPDISBLD (0x1<<1) +#define TRANSFER_DONE (0x1<<0) + +#define USB_PHY_CTRL_EN0 (0x1 << 0) + +/* OPHYPWR */ +#define PHY_0_SLEEP (0x1 << 5) +#define OTG_DISABLE_0 (0x1 << 4) +#define ANALOG_PWRDOWN (0x1 << 3) +#define FORCE_SUSPEND_0 (0x1 << 0) + +/* URSTCON */ +#define HOST_SW_RST (0x1 << 4) +#define PHY_SW_RST1 (0x1 << 3) +#define PHYLNK_SW_RST (0x1 << 2) +#define LINK_SW_RST (0x1 << 1) +#define PHY_SW_RST0 (0x1 << 0) + +/* OPHYCLK */ +#define COMMON_ON_N1 (0x1 << 7) +#define COMMON_ON_N0 (0x1 << 4) +#define ID_PULLUP0 (0x1 << 2) +#define CLK_SEL_24MHZ (0x3 << 0) +#define CLK_SEL_12MHZ (0x2 << 0) +#define CLK_SEL_48MHZ (0x0 << 0) + +/* Device Configuration Register DCFG */ +#define DEV_SPEED_HIGH_SPEED_20 (0x0 << 0) +#define DEV_SPEED_FULL_SPEED_20 (0x1 << 0) +#define DEV_SPEED_LOW_SPEED_11 (0x2 << 0) +#define DEV_SPEED_FULL_SPEED_11 (0x3 << 0) +#define EP_MISS_CNT(x) (x << 18) +#define DEVICE_ADDRESS(x) (x << 4) + +/* Core Reset Register (GRSTCTL) */ +#define TX_FIFO_FLUSH (0x1 << 5) +#define RX_FIFO_FLUSH (0x1 << 4) +#define TX_FIFO_NUMBER(x) (x << 6) +#define TX_FIFO_FLUSH_ALL TX_FIFO_NUMBER(0x10) + +/* Masks definitions */ +#define GINTMSK_INIT (INT_OUT_EP | INT_IN_EP | INT_RESUME | INT_ENUMDONE\ + | INT_RESET | INT_SUSPEND) +#define DOEPMSK_INIT (CTRL_OUT_EP_SETUP_PHASE_DONE | AHB_ERROR|TRANSFER_DONE) +#define DIEPMSK_INIT (NON_ISO_IN_EP_TIMEOUT|AHB_ERROR|TRANSFER_DONE) +#define GAHBCFG_INIT (PTXFE_HALF | NPTXFE_HALF | MODE_DMA | BURST_INCR4\ + | GBL_INT_UNMASK) + +/* Device Endpoint X Transfer Size Register (DIEPTSIZX) */ +#define DIEPT_SIZ_PKT_CNT(x) (x << 19) +#define DIEPT_SIZ_XFER_SIZE(x) (x << 0) + +/* Device OUT Endpoint X Transfer Size Register (DOEPTSIZX) */ +#define DOEPT_SIZ_PKT_CNT(x) (x << 19) +#define DOEPT_SIZ_XFER_SIZE(x) (x << 0) +#define DOEPT_SIZ_XFER_SIZE_MAX_EP0 (0x7F << 0) +#define DOEPT_SIZ_XFER_SIZE_MAX_EP (0x7FFF << 0) + +/* Device Endpoint-N Control Register (DIEPCTLn/DOEPCTLn) */ +#define DIEPCTL_TX_FIFO_NUM(x) (x << 22) +#define DIEPCTL_TX_FIFO_NUM_MASK (~DIEPCTL_TX_FIFO_NUM(0xF)) + +/* Device ALL Endpoints Interrupt Register (DAINT) */ +#define DAINT_IN_EP_INT(x) (x << 0) +#define DAINT_OUT_EP_INT(x) (x << 16) +#endif diff --git a/drivers/usb/gadget/s3c_udc_otg.c b/drivers/usb/gadget/s3c_udc_otg.c new file mode 100644 index 0000000..5a3ac78 --- /dev/null +++ b/drivers/usb/gadget/s3c_udc_otg.c @@ -0,0 +1,892 @@ +/* + * drivers/usb/gadget/s3c_udc_otg.c + * Samsung S3C on-chip full/high speed USB OTG 2.0 device controllers + * + * Copyright (C) 2008 for Samsung Electronics + * + * BSP Support for Samsung's UDC driver + * available at: + * git://git.kernel.org/pub/scm/linux/kernel/git/kki_ap/linux-2.6-samsung.git + * + * State machine bugfixes: + * Marek Szyprowski + * + * Ported to u-boot: + * Marek Szyprowski + * Lukasz Majewski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include +#include + +#include "regs-otg.h" +#include +#include + +/***********************************************************/ + +#define OTG_DMA_MODE 1 + +#undef DEBUG_S3C_UDC_SETUP +#undef DEBUG_S3C_UDC_EP0 +#undef DEBUG_S3C_UDC_ISR +#undef DEBUG_S3C_UDC_OUT_EP +#undef DEBUG_S3C_UDC_IN_EP +#undef DEBUG_S3C_UDC + +/* #define DEBUG_S3C_UDC_SETUP */ +/* #define DEBUG_S3C_UDC_EP0 */ +/* #define DEBUG_S3C_UDC_ISR */ +/* #define DEBUG_S3C_UDC_OUT_EP */ +/* #define DEBUG_S3C_UDC_IN_EP */ +/* #define DEBUG_S3C_UDC */ + +#include + +#define EP0_CON 0 +#define EP_MASK 0xF + +#if defined(DEBUG_S3C_UDC_SETUP) || defined(DEBUG_S3C_UDC_ISR) \ + || defined(DEBUG_S3C_UDC_OUT_EP) +static char *state_names[] = { + "WAIT_FOR_SETUP", + "DATA_STATE_XMIT", + "DATA_STATE_NEED_ZLP", + "WAIT_FOR_OUT_STATUS", + "DATA_STATE_RECV", + "WAIT_FOR_COMPLETE", + "WAIT_FOR_OUT_COMPLETE", + "WAIT_FOR_IN_COMPLETE", + "WAIT_FOR_NULL_COMPLETE", +}; +#endif + +#define DRIVER_DESC "S3C HS USB OTG Device Driver, (c) Samsung Electronics" +#define DRIVER_VERSION "15 March 2009" + +struct s3c_udc *the_controller; + +static const char driver_name[] = "s3c-udc"; +static const char driver_desc[] = DRIVER_DESC; +static const char ep0name[] = "ep0-control"; + +/* Max packet size*/ +static unsigned int ep0_fifo_size = 64; +static unsigned int ep_fifo_size = 512; +static unsigned int ep_fifo_size2 = 1024; +static int reset_available = 1; + +static struct usb_ctrlrequest *usb_ctrl; +static dma_addr_t usb_ctrl_dma_addr; + +/* + Local declarations. +*/ +static int s3c_ep_enable(struct usb_ep *ep, + const struct usb_endpoint_descriptor *); +static int s3c_ep_disable(struct usb_ep *ep); +static struct usb_request *s3c_alloc_request(struct usb_ep *ep, + gfp_t gfp_flags); +static void s3c_free_request(struct usb_ep *ep, struct usb_request *); + +static int s3c_queue(struct usb_ep *ep, struct usb_request *, gfp_t gfp_flags); +static int s3c_dequeue(struct usb_ep *ep, struct usb_request *); +static int s3c_fifo_status(struct usb_ep *ep); +static void s3c_fifo_flush(struct usb_ep *ep); +static void s3c_ep0_read(struct s3c_udc *dev); +static void s3c_ep0_kick(struct s3c_udc *dev, struct s3c_ep *ep); +static void s3c_handle_ep0(struct s3c_udc *dev); +static int s3c_ep0_write(struct s3c_udc *dev); +static int write_fifo_ep0(struct s3c_ep *ep, struct s3c_request *req); +static void done(struct s3c_ep *ep, struct s3c_request *req, int status); +static void stop_activity(struct s3c_udc *dev, + struct usb_gadget_driver *driver); +static int udc_enable(struct s3c_udc *dev); +static void udc_set_address(struct s3c_udc *dev, unsigned char address); +static void reconfig_usbd(void); +static void set_max_pktsize(struct s3c_udc *dev, enum usb_device_speed speed); +static void nuke(struct s3c_ep *ep, int status); +static int s3c_udc_set_halt(struct usb_ep *_ep, int value); +static void s3c_udc_set_nak(struct s3c_ep *ep); + +static struct usb_ep_ops s3c_ep_ops = { + .enable = s3c_ep_enable, + .disable = s3c_ep_disable, + + .alloc_request = s3c_alloc_request, + .free_request = s3c_free_request, + + .queue = s3c_queue, + .dequeue = s3c_dequeue, + + .set_halt = s3c_udc_set_halt, + .fifo_status = s3c_fifo_status, + .fifo_flush = s3c_fifo_flush, +}; + +#define create_proc_files() do {} while (0) +#define remove_proc_files() do {} while (0) + +/***********************************************************/ + +void __iomem *regs_otg; +struct s3c_usbotg_reg *reg; +struct s3c_usbotg_phy *phy; +static unsigned int usb_phy_ctrl; + +void otg_phy_init(struct s3c_udc *dev) +{ + dev->pdata->phy_control(1); + + /*USB PHY0 Enable */ + printf("USB PHY0 Enable\n"); + + /* Enable PHY */ + writel(readl(usb_phy_ctrl) | USB_PHY_CTRL_EN0, usb_phy_ctrl); + + if (dev->pdata->usb_flags == PHY0_SLEEP) /* C210 Universal */ + writel((readl(&phy->phypwr) + &~(PHY_0_SLEEP | OTG_DISABLE_0 | ANALOG_PWRDOWN) + &~FORCE_SUSPEND_0), &phy->phypwr); + else /* C110 GONI */ + writel((readl(&phy->phypwr) &~(OTG_DISABLE_0 | ANALOG_PWRDOWN) + &~FORCE_SUSPEND_0), &phy->phypwr); + + writel((readl(&phy->phyclk) &~(ID_PULLUP0 | COMMON_ON_N0)) | + CLK_SEL_24MHZ, &phy->phyclk); /* PLL 24Mhz */ + + writel((readl(&phy->rstcon) &~(LINK_SW_RST | PHYLNK_SW_RST)) + | PHY_SW_RST0, &phy->rstcon); + udelay(10); + writel(readl(&phy->rstcon) + &~(PHY_SW_RST0 | LINK_SW_RST | PHYLNK_SW_RST), &phy->rstcon); + udelay(10); +} + +void otg_phy_off(struct s3c_udc *dev) +{ + /* reset controller just in case */ + writel(PHY_SW_RST0, &phy->rstcon); + udelay(20); + writel(readl(&phy->phypwr) &~PHY_SW_RST0, &phy->rstcon); + udelay(20); + + writel(readl(&phy->phypwr) | OTG_DISABLE_0 | ANALOG_PWRDOWN + | FORCE_SUSPEND_0, &phy->phypwr); + + writel(readl(usb_phy_ctrl) &~USB_PHY_CTRL_EN0, usb_phy_ctrl); + + writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)), + &phy->phyclk); + + udelay(10000); + + dev->pdata->phy_control(0); +} + +/***********************************************************/ + +#include "s3c_udc_otg_xfer_dma.c" + +/* + * udc_disable - disable USB device controller + */ +static void udc_disable(struct s3c_udc *dev) +{ + DEBUG_SETUP("%s: %p\n", __func__, dev); + + udc_set_address(dev, 0); + + dev->ep0state = WAIT_FOR_SETUP; + dev->gadget.speed = USB_SPEED_UNKNOWN; + dev->usb_address = 0; + + otg_phy_off(dev); +} + +/* + * udc_reinit - initialize software state + */ +static void udc_reinit(struct s3c_udc *dev) +{ + unsigned int i; + + DEBUG_SETUP("%s: %p\n", __func__, dev); + + /* device/ep0 records init */ + INIT_LIST_HEAD(&dev->gadget.ep_list); + INIT_LIST_HEAD(&dev->gadget.ep0->ep_list); + dev->ep0state = WAIT_FOR_SETUP; + + /* basic endpoint records init */ + for (i = 0; i < S3C_MAX_ENDPOINTS; i++) { + struct s3c_ep *ep = &dev->ep[i]; + + if (i != 0) + list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list); + + ep->desc = 0; + ep->stopped = 0; + INIT_LIST_HEAD(&ep->queue); + ep->pio_irqs = 0; + } + + /* the rest was statically initialized, and is read-only */ +} + +#define BYTES2MAXP(x) (x / 8) +#define MAXP2BYTES(x) (x * 8) + +/* until it's enabled, this UDC should be completely invisible + * to any USB host. + */ +static int udc_enable(struct s3c_udc *dev) +{ + DEBUG_SETUP("%s: %p\n", __func__, dev); + + otg_phy_init(dev); + reconfig_usbd(); + + DEBUG_SETUP("S3C USB 2.0 OTG Controller Core Initialized : 0x%x\n", + readl(®->gintmsk)); + + dev->gadget.speed = USB_SPEED_UNKNOWN; + + return 0; +} + +/* + Register entry point for the peripheral controller driver. +*/ +int usb_gadget_register_driver(struct usb_gadget_driver *driver) +{ + struct s3c_udc *dev = the_controller; + int retval = 0; + unsigned long flags; + + DEBUG_SETUP("%s: %s\n", __func__, "no name"); + + if (!driver + || (driver->speed != USB_SPEED_FULL + && driver->speed != USB_SPEED_HIGH) + || !driver->bind || !driver->disconnect || !driver->setup) + return -EINVAL; + if (!dev) + return -ENODEV; + if (dev->driver) + return -EBUSY; + + spin_lock_irqsave(&dev->lock, flags); + /* first hook up the driver ... */ + dev->driver = driver; + spin_unlock_irqrestore(&dev->lock, flags); + + if (retval) { /* TODO */ + printf("target device_add failed, error %d\n", retval); + return retval; + } + + retval = driver->bind(&dev->gadget); + if (retval) { + DEBUG_SETUP("%s: bind to driver --> error %d\n", + dev->gadget.name, retval); + dev->driver = 0; + return retval; + } + + enable_irq(IRQ_OTG); + + DEBUG_SETUP("Registered gadget driver %s\n", dev->gadget.name); + udc_enable(dev); + + return 0; +} + +/* + * Unregister entry point for the peripheral controller driver. + */ +int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) +{ + struct s3c_udc *dev = the_controller; + unsigned long flags; + + if (!dev) + return -ENODEV; + if (!driver || driver != dev->driver) + return -EINVAL; + + spin_lock_irqsave(&dev->lock, flags); + dev->driver = 0; + stop_activity(dev, driver); + spin_unlock_irqrestore(&dev->lock, flags); + + driver->unbind(&dev->gadget); + + disable_irq(IRQ_OTG); + + udc_disable(dev); + return 0; +} + +/* + * done - retire a request; caller blocked irqs + */ +static void done(struct s3c_ep *ep, struct s3c_request *req, int status) +{ + unsigned int stopped = ep->stopped; + + DEBUG("%s: %s %p, req = %p, stopped = %d\n", + __func__, ep->ep.name, ep, &req->req, stopped); + + list_del_init(&req->queue); + + if (likely(req->req.status == -EINPROGRESS)) + req->req.status = status; + else + status = req->req.status; + + if (status && status != -ESHUTDOWN) { + DEBUG("complete %s req %p stat %d len %u/%u\n", + ep->ep.name, &req->req, status, + req->req.actual, req->req.length); + } + + /* don't modify queue heads during completion callback */ + ep->stopped = 1; + +#ifdef DEBUG_S3C_UDC + printf("calling complete callback\n"); + { + int i, len = req->req.length; + + printf("pkt[%d] = ", req->req.length); + if (len > 64) + len = 64; + for (i = 0; i < len; i++) { + printf("%02x", ((u8 *)req->req.buf)[i]); + if ((i & 7) == 7) + printf(" "); + } + printf("\n"); + } +#endif + spin_unlock(&ep->dev->lock); + req->req.complete(&ep->ep, &req->req); + spin_lock(&ep->dev->lock); + + DEBUG("callback completed\n"); + + ep->stopped = stopped; +} + +/* + * nuke - dequeue ALL requests + */ +static void nuke(struct s3c_ep *ep, int status) +{ + struct s3c_request *req; + + DEBUG("%s: %s %p\n", __func__, ep->ep.name, ep); + + /* called with irqs blocked */ + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct s3c_request, queue); + done(ep, req, status); + } +} + +static void stop_activity(struct s3c_udc *dev, + struct usb_gadget_driver *driver) +{ + int i; + + /* don't disconnect drivers more than once */ + if (dev->gadget.speed == USB_SPEED_UNKNOWN) + driver = 0; + dev->gadget.speed = USB_SPEED_UNKNOWN; + + /* prevent new request submissions, kill any outstanding requests */ + for (i = 0; i < S3C_MAX_ENDPOINTS; i++) { + struct s3c_ep *ep = &dev->ep[i]; + ep->stopped = 1; + nuke(ep, -ESHUTDOWN); + } + + /* report disconnect; the driver is already quiesced */ + if (driver) { + spin_unlock(&dev->lock); + driver->disconnect(&dev->gadget); + spin_lock(&dev->lock); + } + + /* re-init driver-visible data structures */ + udc_reinit(dev); +} + +static void reconfig_usbd(void) +{ + /* 2. Soft-reset OTG Core and then unreset again. */ + int i; + unsigned int uTemp = writel(CORE_SOFT_RESET, ®->grstctl); + + DEBUG(2, "Reseting OTG controller\n"); + + writel(0<<15 /* PHY Low Power Clock sel*/ + |1<<14 /* Non-Periodic TxFIFO Rewind Enable*/ + |0x5<<10 /* Turnaround time*/ + |0<<9 | 0<<8 /* [0:HNP disable,1:HNP enable][ 0:SRP disable*/ + /* 1:SRP enable] H1= 1,1*/ + |0<<7 /* Ulpi DDR sel*/ + |0<<6 /* 0: high speed utmi+, 1: full speed serial*/ + |0<<4 /* 0: utmi+, 1:ulpi*/ + |1<<3 /* phy i/f 0:8bit, 1:16bit*/ + |0x7<<0, /* HS/FS Timeout**/ + ®->gusbcfg); + + /* 3. Put the OTG device core in the disconnected state.*/ + uTemp = readl(®->dctl); + uTemp |= SOFT_DISCONNECT; + writel(uTemp, ®->dctl); + + udelay(20); + + /* 4. Make the OTG device core exit from the disconnected state.*/ + uTemp = readl(®->dctl); + uTemp = uTemp & ~SOFT_DISCONNECT; + writel(uTemp, ®->dctl); + + /* 5. Configure OTG Core to initial settings of device mode.*/ + /* [][1: full speed(30Mhz) 0:high speed]*/ + writel(EP_MISS_CNT(1) | DEV_SPEED_HIGH_SPEED_20, ®->dcfg); + + mdelay(1); + + /* 6. Unmask the core interrupts*/ + writel(GINTMSK_INIT, ®->gintmsk); + + /* 7. Set NAK bit of EP0, EP1, EP2*/ + writel(DEPCTL_EPDIS|DEPCTL_SNAK, ®->out_endp[EP0_CON].doepctl); + writel(DEPCTL_EPDIS|DEPCTL_SNAK, ®->in_endp[EP0_CON].diepctl); + + for (i = 1; i < S3C_MAX_ENDPOINTS; i++) { + writel(DEPCTL_EPDIS|DEPCTL_SNAK, ®->out_endp[i].doepctl); + writel(DEPCTL_EPDIS|DEPCTL_SNAK, ®->in_endp[i].diepctl); + } + + /* 8. Unmask EPO interrupts*/ + writel(((1 << EP0_CON) << DAINT_OUT_BIT) + | (1 << EP0_CON), ®->daintmsk); + + /* 9. Unmask device OUT EP common interrupts*/ + writel(DOEPMSK_INIT, ®->doepmsk); + + /* 10. Unmask device IN EP common interrupts*/ + writel(DIEPMSK_INIT, ®->diepmsk); + + /* 11. Set Rx FIFO Size (in 32-bit words) */ + writel(RX_FIFO_SIZE >> 2, ®->grxfsiz); + + /* 12. Set Non Periodic Tx FIFO Size */ + writel((NPTX_FIFO_SIZE >> 2) << 16 | ((RX_FIFO_SIZE >> 2)) << 0, + ®->gnptxfsiz); + + for (i = 1; i < S3C_MAX_HW_ENDPOINTS; i++) + writel((PTX_FIFO_SIZE >> 2) << 16 | + ((RX_FIFO_SIZE + NPTX_FIFO_SIZE + + PTX_FIFO_SIZE*(i-1)) >> 2) << 0, + ®->dieptxf[i-1]); + + /* Flush the RX FIFO */ + writel(RX_FIFO_FLUSH, ®->grstctl); + while (readl(®->grstctl) & RX_FIFO_FLUSH) + DEBUG("%s: waiting for S3C_UDC_OTG_GRSTCTL\n", __func__); + + /* Flush all the Tx FIFO's */ + writel(TX_FIFO_FLUSH_ALL, ®->grstctl); + writel(TX_FIFO_FLUSH_ALL | TX_FIFO_FLUSH, ®->grstctl); + while (readl(®->grstctl) & TX_FIFO_FLUSH) + DEBUG("%s: waiting for S3C_UDC_OTG_GRSTCTL\n", __func__); + + /* 13. Clear NAK bit of EP0, EP1, EP2*/ + /* For Slave mode*/ + /* EP0: Control OUT */ + writel(DEPCTL_EPDIS | DEPCTL_CNAK, + ®->out_endp[EP0_CON].doepctl); + + /* 14. Initialize OTG Link Core.*/ + writel(GAHBCFG_INIT, ®->gahbcfg); +} + +static void set_max_pktsize(struct s3c_udc *dev, enum usb_device_speed speed) +{ + unsigned int ep_ctrl; + int i; + + if (speed == USB_SPEED_HIGH) { + ep0_fifo_size = 64; + ep_fifo_size = 512; + ep_fifo_size2 = 1024; + dev->gadget.speed = USB_SPEED_HIGH; + } else { + ep0_fifo_size = 64; + ep_fifo_size = 64; + ep_fifo_size2 = 64; + dev->gadget.speed = USB_SPEED_FULL; + } + + dev->ep[0].ep.maxpacket = ep0_fifo_size; + for (i = 1; i < S3C_MAX_ENDPOINTS; i++) + dev->ep[i].ep.maxpacket = ep_fifo_size; + + /* EP0 - Control IN (64 bytes)*/ + ep_ctrl = readl(®->in_endp[EP0_CON].diepctl); + writel(ep_ctrl|(0<<0), ®->in_endp[EP0_CON].diepctl); + + /* EP0 - Control OUT (64 bytes)*/ + ep_ctrl = readl(®->out_endp[EP0_CON].doepctl); + writel(ep_ctrl|(0<<0), ®->out_endp[EP0_CON].doepctl); +} + +static int s3c_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct s3c_ep *ep; + struct s3c_udc *dev; + unsigned long flags; + + DEBUG("%s: %p\n", __func__, _ep); + + ep = container_of(_ep, struct s3c_ep, ep); + if (!_ep || !desc || ep->desc || _ep->name == ep0name + || desc->bDescriptorType != USB_DT_ENDPOINT + || ep->bEndpointAddress != desc->bEndpointAddress + || ep_maxpacket(ep) < le16_to_cpu(desc->wMaxPacketSize)) { + + DEBUG("%s: bad ep or descriptor\n", __func__); + return -EINVAL; + } + + /* xfer types must match, except that interrupt ~= bulk */ + if (ep->bmAttributes != desc->bmAttributes + && ep->bmAttributes != USB_ENDPOINT_XFER_BULK + && desc->bmAttributes != USB_ENDPOINT_XFER_INT) { + + DEBUG("%s: %s type mismatch\n", __func__, _ep->name); + return -EINVAL; + } + + /* hardware _could_ do smaller, but driver doesn't */ + if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK + && le16_to_cpu(desc->wMaxPacketSize) != ep_maxpacket(ep)) + || !desc->wMaxPacketSize) { + + DEBUG("%s: bad %s maxpacket\n", __func__, _ep->name); + return -ERANGE; + } + + dev = ep->dev; + if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) { + + DEBUG("%s: bogus device state\n", __func__); + return -ESHUTDOWN; + } + + ep->stopped = 0; + ep->desc = desc; + ep->pio_irqs = 0; + ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + + /* Reset halt state */ + s3c_udc_set_nak(ep); + s3c_udc_set_halt(_ep, 0); + + spin_lock_irqsave(&ep->dev->lock, flags); + s3c_udc_ep_activate(ep); + spin_unlock_irqrestore(&ep->dev->lock, flags); + + DEBUG("%s: enabled %s, stopped = %d, maxpacket = %d\n", + __func__, _ep->name, ep->stopped, ep->ep.maxpacket); + return 0; +} + +/* + * Disable EP + */ +static int s3c_ep_disable(struct usb_ep *_ep) +{ + struct s3c_ep *ep; + unsigned long flags; + + DEBUG("%s: %p\n", __func__, _ep); + + ep = container_of(_ep, struct s3c_ep, ep); + if (!_ep || !ep->desc) { + DEBUG("%s: %s not enabled\n", __func__, + _ep ? ep->ep.name : NULL); + return -EINVAL; + } + + spin_lock_irqsave(&ep->dev->lock, flags); + + /* Nuke all pending requests */ + nuke(ep, -ESHUTDOWN); + + ep->desc = 0; + ep->stopped = 1; + + spin_unlock_irqrestore(&ep->dev->lock, flags); + + DEBUG("%s: disabled %s\n", __func__, _ep->name); + return 0; +} + +static struct usb_request *s3c_alloc_request(struct usb_ep *ep, + gfp_t gfp_flags) +{ + struct s3c_request *req; + + DEBUG("%s: %s %p\n", __func__, ep->name, ep); + + req = kmalloc(sizeof *req, gfp_flags); + if (!req) + return 0; + + memset(req, 0, sizeof *req); + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +static void s3c_free_request(struct usb_ep *ep, struct usb_request *_req) +{ + struct s3c_request *req; + + DEBUG("%s: %p\n", __func__, ep); + + req = container_of(_req, struct s3c_request, req); + WARN_ON(!list_empty(&req->queue)); + kfree(req); +} + +/* dequeue JUST ONE request */ +static int s3c_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct s3c_ep *ep; + struct s3c_request *req; + unsigned long flags; + + DEBUG("%s: %p\n", __func__, _ep); + + ep = container_of(_ep, struct s3c_ep, ep); + if (!_ep || ep->ep.name == ep0name) + return -EINVAL; + + spin_lock_irqsave(&ep->dev->lock, flags); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry(req, &ep->queue, queue) { + if (&req->req == _req) + break; + } + if (&req->req != _req) { + spin_unlock_irqrestore(&ep->dev->lock, flags); + return -EINVAL; + } + + done(ep, req, -ECONNRESET); + + spin_unlock_irqrestore(&ep->dev->lock, flags); + return 0; +} + +/* + * Return bytes in EP FIFO + */ +static int s3c_fifo_status(struct usb_ep *_ep) +{ + int count = 0; + struct s3c_ep *ep; + + ep = container_of(_ep, struct s3c_ep, ep); + if (!_ep) { + DEBUG("%s: bad ep\n", __func__); + return -ENODEV; + } + + DEBUG("%s: %d\n", __func__, ep_index(ep)); + + /* LPD can't report unclaimed bytes from IN fifos */ + if (ep_is_in(ep)) + return -EOPNOTSUPP; + + return count; +} + +/* + * Flush EP FIFO + */ +static void s3c_fifo_flush(struct usb_ep *_ep) +{ + struct s3c_ep *ep; + + ep = container_of(_ep, struct s3c_ep, ep); + if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) { + DEBUG("%s: bad ep\n", __func__); + return; + } + + DEBUG("%s: %d\n", __func__, ep_index(ep)); +} + +static const struct usb_gadget_ops s3c_udc_ops = { + /* current versions must always be self-powered */ +}; + +static struct s3c_udc memory = { + .usb_address = 0, + .gadget = { + .ops = &s3c_udc_ops, + .ep0 = &memory.ep[0].ep, + .name = driver_name, + }, + + /* control endpoint */ + .ep[0] = { + .ep = { + .name = ep0name, + .ops = &s3c_ep_ops, + .maxpacket = EP0_FIFO_SIZE, + }, + .dev = &memory, + + .bEndpointAddress = 0, + .bmAttributes = 0, + + .ep_type = ep_control, + }, + + /* first group of endpoints */ + .ep[1] = { + .ep = { + .name = "ep1in-bulk", + .ops = &s3c_ep_ops, + .maxpacket = EP_FIFO_SIZE, + }, + .dev = &memory, + + .bEndpointAddress = USB_DIR_IN | 1, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + + .ep_type = ep_bulk_out, + .fifo_num = 1, + }, + + .ep[2] = { + .ep = { + .name = "ep2out-bulk", + .ops = &s3c_ep_ops, + .maxpacket = EP_FIFO_SIZE, + }, + .dev = &memory, + + .bEndpointAddress = USB_DIR_OUT | 2, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + + .ep_type = ep_bulk_in, + .fifo_num = 2, + }, + + .ep[3] = { + .ep = { + .name = "ep3in-int", + .ops = &s3c_ep_ops, + .maxpacket = EP_FIFO_SIZE, + }, + .dev = &memory, + + .bEndpointAddress = USB_DIR_IN | 3, + .bmAttributes = USB_ENDPOINT_XFER_INT, + + .ep_type = ep_interrupt, + .fifo_num = 3, + }, +}; + +/* + * probe - binds to the platform device + */ + +int s3c_udc_probe(struct s3c_plat_otg_data *pdata) +{ + struct s3c_udc *dev = &memory; + int retval = 0, i; + + DEBUG("%s: %p\n", __func__, pdata); + + dev->pdata = pdata; + + phy = (struct s3c_usbotg_phy *)pdata->regs_phy; + reg = (struct s3c_usbotg_reg *)pdata->regs_otg; + usb_phy_ctrl = pdata->usb_phy_ctrl; + + /* regs_otg = (void *)pdata->regs_otg; */ + + dev->gadget.is_dualspeed = 1; /* Hack only*/ + dev->gadget.is_otg = 0; + dev->gadget.is_a_peripheral = 0; + dev->gadget.b_hnp_enable = 0; + dev->gadget.a_hnp_support = 0; + dev->gadget.a_alt_hnp_support = 0; + + the_controller = dev; + + for (i = 0; i < S3C_MAX_ENDPOINTS+1; i++) { + dev->dma_buf[i] = kmalloc(DMA_BUFFER_SIZE, GFP_KERNEL); + dev->dma_addr[i] = (dma_addr_t) dev->dma_buf[i]; + invalidate_dcache_range((unsigned long) dev->dma_buf[i], + (unsigned long) (dev->dma_buf[i] + + DMA_BUFFER_SIZE)); + } + usb_ctrl = dev->dma_buf[0]; + usb_ctrl_dma_addr = dev->dma_addr[0]; + + udc_reinit(dev); + + return retval; +} + +int usb_gadget_handle_interrupts() +{ + u32 intr_status = readl(®->gintsts); + u32 gintmsk = readl(®->gintmsk); + + if (intr_status & gintmsk) + return s3c_udc_irq(1, (void *)the_controller); + return 0; +} diff --git a/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c b/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c new file mode 100644 index 0000000..2553857 --- /dev/null +++ b/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c @@ -0,0 +1,1444 @@ +/* + * drivers/usb/gadget/s3c_udc_otg_xfer_dma.c + * Samsung S3C on-chip full/high speed USB OTG 2.0 device controllers + * + * Copyright (C) 2009 for Samsung Electronics + * + * BSP Support for Samsung's UDC driver + * available at: + * git://git.kernel.org/pub/scm/linux/kernel/git/kki_ap/linux-2.6-samsung.git + * + * State machine bugfixes: + * Marek Szyprowski + * + * Ported to u-boot: + * Marek Szyprowski + * Lukasz Majewski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +static u8 clear_feature_num; +int clear_feature_flag; + +/* Bulk-Only Mass Storage Reset (class-specific request) */ +#define GET_MAX_LUN_REQUEST 0xFE +#define BOT_RESET_REQUEST 0xFF + +static inline void s3c_udc_ep0_zlp(struct s3c_udc *dev) +{ + u32 ep_ctrl; + + flush_dcache_range((unsigned long) usb_ctrl_dma_addr, + (unsigned long) usb_ctrl_dma_addr + + DMA_BUFFER_SIZE); + + writel(usb_ctrl_dma_addr, ®->in_endp[EP0_CON].diepdma); + writel(DIEPT_SIZ_PKT_CNT(1), ®->in_endp[EP0_CON].dieptsiz); + + ep_ctrl = readl(®->in_endp[EP0_CON].diepctl); + writel(ep_ctrl|DEPCTL_EPENA|DEPCTL_CNAK, + ®->in_endp[EP0_CON].diepctl); + + DEBUG_EP0("%s:EP0 ZLP DIEPCTL0 = 0x%x\n", + __func__, readl(®->in_endp[EP0_CON].diepctl)); + dev->ep0state = WAIT_FOR_IN_COMPLETE; +} + +void s3c_udc_pre_setup(void) +{ + u32 ep_ctrl; + + DEBUG_IN_EP("%s : Prepare Setup packets.\n", __func__); + + invalidate_dcache_range((unsigned long) usb_ctrl_dma_addr, + (unsigned long) usb_ctrl_dma_addr + + DMA_BUFFER_SIZE); + + writel(DOEPT_SIZ_PKT_CNT(1) | sizeof(struct usb_ctrlrequest), + ®->out_endp[EP0_CON].doeptsiz); + writel(usb_ctrl_dma_addr, ®->out_endp[EP0_CON].doepdma); + + ep_ctrl = readl(®->out_endp[EP0_CON].doepctl); + writel(ep_ctrl|DEPCTL_EPENA, ®->out_endp[EP0_CON].doepctl); + + DEBUG_EP0("%s:EP0 ZLP DIEPCTL0 = 0x%x\n", + __func__, readl(®->in_endp[EP0_CON].diepctl)); + DEBUG_EP0("%s:EP0 ZLP DOEPCTL0 = 0x%x\n", + __func__, readl(®->out_endp[EP0_CON].doepctl)); + +} + +static inline void s3c_ep0_complete_out(void) +{ + u32 ep_ctrl; + + DEBUG_EP0("%s:EP0 ZLP DIEPCTL0 = 0x%x\n", + __func__, readl(®->in_endp[EP0_CON].diepctl)); + DEBUG_EP0("%s:EP0 ZLP DOEPCTL0 = 0x%x\n", + __func__, readl(®->out_endp[EP0_CON].doepctl)); + + DEBUG_IN_EP("%s : Prepare Complete Out packet.\n", __func__); + + invalidate_dcache_range((unsigned long) usb_ctrl_dma_addr, + (unsigned long) usb_ctrl_dma_addr + + DMA_BUFFER_SIZE); + + writel(DOEPT_SIZ_PKT_CNT(1) | sizeof(struct usb_ctrlrequest), + ®->out_endp[EP0_CON].doeptsiz); + writel(usb_ctrl_dma_addr, ®->out_endp[EP0_CON].doepdma); + + ep_ctrl = readl(®->out_endp[EP0_CON].doepctl); + writel(ep_ctrl|DEPCTL_EPENA|DEPCTL_CNAK, + ®->out_endp[EP0_CON].doepctl); + + DEBUG_EP0("%s:EP0 ZLP DIEPCTL0 = 0x%x\n", + __func__, readl(®->in_endp[EP0_CON].diepctl)); + DEBUG_EP0("%s:EP0 ZLP DOEPCTL0 = 0x%x\n", + __func__, readl(®->out_endp[EP0_CON].doepctl)); + +} + + +static int setdma_rx(struct s3c_ep *ep, struct s3c_request *req) +{ + u32 *buf, ctrl; + u32 length, pktcnt; + u32 ep_num = ep_index(ep); + + buf = req->req.buf + req->req.actual; + + length = min(req->req.length - req->req.actual, (int)ep->ep.maxpacket); + + ep->len = length; + ep->dma_buf = buf; + + invalidate_dcache_range((unsigned long) ep->dev->dma_buf[ep_num], + (unsigned long) ep->dev->dma_buf[ep_num] + + DMA_BUFFER_SIZE); + + if (length == 0) + pktcnt = 1; + else + pktcnt = (length - 1)/(ep->ep.maxpacket) + 1; + + pktcnt = 1; + ctrl = readl(®->out_endp[ep_num].doepctl); + + writel(the_controller->dma_addr[ep_index(ep)+1], + ®->out_endp[ep_num].doepdma); + writel(DOEPT_SIZ_PKT_CNT(pktcnt) | DOEPT_SIZ_XFER_SIZE(length), + ®->out_endp[ep_num].doeptsiz); + writel(DEPCTL_EPENA|DEPCTL_CNAK|ctrl, ®->out_endp[ep_num].doepctl); + + DEBUG_OUT_EP("%s: EP%d RX DMA start : DOEPDMA = 0x%x," + "DOEPTSIZ = 0x%x, DOEPCTL = 0x%x\n" + "\tbuf = 0x%p, pktcnt = %d, xfersize = %d\n", + __func__, ep_num, + readl(®->out_endp[ep_num].doepdma), + readl(®->out_endp[ep_num].doeptsiz), + readl(®->out_endp[ep_num].doepctl), + buf, pktcnt, length); + return 0; + +} + +int setdma_tx(struct s3c_ep *ep, struct s3c_request *req) +{ + u32 *buf, ctrl = 0; + u32 length, pktcnt; + u32 ep_num = ep_index(ep); + u32 *p = the_controller->dma_buf[ep_index(ep)+1]; + + buf = req->req.buf + req->req.actual; + length = req->req.length - req->req.actual; + + if (ep_num == EP0_CON) + length = min_t(length, (u32)ep_maxpacket(ep)); + + ep->len = length; + ep->dma_buf = buf; + memcpy(p, ep->dma_buf, length); + + flush_dcache_range((unsigned long) p , + (unsigned long) p + DMA_BUFFER_SIZE); + + if (length == 0) + pktcnt = 1; + else + pktcnt = (length - 1)/(ep->ep.maxpacket) + 1; + + /* Flush the endpoint's Tx FIFO */ + writel(TX_FIFO_NUMBER(ep->fifo_num), ®->grstctl); + writel(TX_FIFO_NUMBER(ep->fifo_num) | TX_FIFO_FLUSH, ®->grstctl); + while (readl(®->grstctl) & TX_FIFO_FLUSH) + ; + + writel(the_controller->dma_addr[ep_index(ep)+1], + ®->in_endp[ep_num].diepdma); + writel(DIEPT_SIZ_PKT_CNT(pktcnt) | DIEPT_SIZ_XFER_SIZE(length), + ®->in_endp[ep_num].dieptsiz); + + ctrl = readl(®->in_endp[ep_num].diepctl); + + /* Write the FIFO number to be used for this endpoint */ + ctrl &= DIEPCTL_TX_FIFO_NUM_MASK; + ctrl |= DIEPCTL_TX_FIFO_NUM(ep->fifo_num); + + /* Clear reserved (Next EP) bits */ + ctrl = (ctrl&~(EP_MASK<in_endp[ep_num].diepctl); + + DEBUG_IN_EP("%s:EP%d TX DMA start : DIEPDMA0 = 0x%x," + "DIEPTSIZ0 = 0x%x, DIEPCTL0 = 0x%x\n" + "\tbuf = 0x%p, pktcnt = %d, xfersize = %d\n", + __func__, ep_num, + readl(®->in_endp[ep_num].diepdma), + readl(®->in_endp[ep_num].dieptsiz), + readl(®->in_endp[ep_num].diepctl), + buf, pktcnt, length); + + return length; +} + +static void complete_rx(struct s3c_udc *dev, u8 ep_num) +{ + struct s3c_ep *ep = &dev->ep[ep_num]; + struct s3c_request *req = NULL; + u32 ep_tsr = 0, xfer_size = 0, is_short = 0; + u32 *p = the_controller->dma_buf[ep_index(ep)+1]; + + if (list_empty(&ep->queue)) { + DEBUG_OUT_EP("%s: RX DMA done : NULL REQ on OUT EP-%d\n", + __func__, ep_num); + return; + + } + + req = list_entry(ep->queue.next, struct s3c_request, queue); + ep_tsr = readl(®->out_endp[ep_num].doeptsiz); + + if (ep_num == EP0_CON) + xfer_size = (ep_tsr & DOEPT_SIZ_XFER_SIZE_MAX_EP0); + else + xfer_size = (ep_tsr & DOEPT_SIZ_XFER_SIZE_MAX_EP); + + xfer_size = ep->len - xfer_size; + + invalidate_dcache_range((unsigned long) p, + (unsigned long) p + DMA_BUFFER_SIZE); + + memcpy(ep->dma_buf, p, ep->len); + + req->req.actual += min(xfer_size, req->req.length - req->req.actual); + is_short = (xfer_size < ep->ep.maxpacket); + + DEBUG_OUT_EP("%s: RX DMA done : ep = %d, rx bytes = %d/%d, " + "is_short = %d, DOEPTSIZ = 0x%x, remained bytes = %d\n", + __func__, ep_num, req->req.actual, req->req.length, + is_short, ep_tsr, xfer_size); + + if (is_short || req->req.actual == req->req.length) { + if (ep_num == EP0_CON && dev->ep0state == DATA_STATE_RECV) { + DEBUG_OUT_EP(" => Send ZLP\n"); + s3c_udc_ep0_zlp(dev); + /* packet will be completed in complete_tx() */ + dev->ep0state = WAIT_FOR_IN_COMPLETE; + } else { + done(ep, req, 0); + + if (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, + struct s3c_request, queue); + DEBUG_OUT_EP("%s: Next Rx request start...\n", + __func__); + setdma_rx(ep, req); + } + } + } else + setdma_rx(ep, req); +} + +static void complete_tx(struct s3c_udc *dev, u8 ep_num) +{ + struct s3c_ep *ep = &dev->ep[ep_num]; + struct s3c_request *req; + u32 ep_tsr = 0, xfer_size = 0, is_short = 0; + u32 last; + + if (dev->ep0state == WAIT_FOR_NULL_COMPLETE) { + dev->ep0state = WAIT_FOR_OUT_COMPLETE; + s3c_ep0_complete_out(); + return; + } + + if (list_empty(&ep->queue)) { + DEBUG_IN_EP("%s: TX DMA done : NULL REQ on IN EP-%d\n", + __func__, ep_num); + return; + + } + + req = list_entry(ep->queue.next, struct s3c_request, queue); + + ep_tsr = readl(®->in_endp[ep_num].dieptsiz); + + xfer_size = ep->len; + is_short = (xfer_size < ep->ep.maxpacket); + req->req.actual += min(xfer_size, req->req.length - req->req.actual); + + DEBUG_IN_EP("%s: TX DMA done : ep = %d, tx bytes = %d/%d, " + "is_short = %d, DIEPTSIZ = 0x%x, remained bytes = %d\n", + __func__, ep_num, req->req.actual, req->req.length, + is_short, ep_tsr, xfer_size); + + if (ep_num == 0) { + if (dev->ep0state == DATA_STATE_XMIT) { + DEBUG_IN_EP("%s: ep_num = %d, ep0stat ==" + "DATA_STATE_XMIT\n", + __func__, ep_num); + last = write_fifo_ep0(ep, req); + if (last) + dev->ep0state = WAIT_FOR_COMPLETE; + } else if (dev->ep0state == WAIT_FOR_IN_COMPLETE) { + DEBUG_IN_EP("%s: ep_num = %d, completing request\n", + __func__, ep_num); + done(ep, req, 0); + dev->ep0state = WAIT_FOR_SETUP; + } else if (dev->ep0state == WAIT_FOR_COMPLETE) { + DEBUG_IN_EP("%s: ep_num = %d, completing request\n", + __func__, ep_num); + done(ep, req, 0); + dev->ep0state = WAIT_FOR_OUT_COMPLETE; + s3c_ep0_complete_out(); + } else { + DEBUG_IN_EP("%s: ep_num = %d, invalid ep state\n", + __func__, ep_num); + } + return; + } + + if (req->req.actual == req->req.length) + done(ep, req, 0); + + if (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct s3c_request, queue); + DEBUG_IN_EP("%s: Next Tx request start...\n", __func__); + setdma_tx(ep, req); + } +} + +static inline void s3c_udc_check_tx_queue(struct s3c_udc *dev, u8 ep_num) +{ + struct s3c_ep *ep = &dev->ep[ep_num]; + struct s3c_request *req; + + DEBUG_IN_EP("%s: Check queue, ep_num = %d\n", __func__, ep_num); + + if (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct s3c_request, queue); + DEBUG_IN_EP("%s: Next Tx request(0x%p) start...\n", + __func__, req); + + if (ep_is_in(ep)) + setdma_tx(ep, req); + else + setdma_rx(ep, req); + } else { + DEBUG_IN_EP("%s: NULL REQ on IN EP-%d\n", __func__, ep_num); + + return; + } + +} + +static void process_ep_in_intr(struct s3c_udc *dev) +{ + u32 ep_intr, ep_intr_status; + u8 ep_num = 0; + + ep_intr = readl(®->daint); + DEBUG_IN_EP("*** %s: EP In interrupt : DAINT = 0x%x\n", + __func__, ep_intr); + + ep_intr &= DAINT_MASK; + + while (ep_intr) { + if (ep_intr & DAINT_IN_EP_INT(1)) { + ep_intr_status = readl(®->in_endp[ep_num].diepint); + DEBUG_IN_EP("\tEP%d-IN : DIEPINT = 0x%x\n", + ep_num, ep_intr_status); + + /* Interrupt Clear */ + writel(ep_intr_status, ®->in_endp[ep_num].diepint); + + if (ep_intr_status & TRANSFER_DONE) { + complete_tx(dev, ep_num); + + if (ep_num == 0) { + if (dev->ep0state == + WAIT_FOR_IN_COMPLETE) + dev->ep0state = WAIT_FOR_SETUP; + + if (dev->ep0state == WAIT_FOR_SETUP) + s3c_udc_pre_setup(); + + /* continue transfer after + set_clear_halt for DMA mode */ + if (clear_feature_flag == 1) { + s3c_udc_check_tx_queue(dev, + clear_feature_num); + clear_feature_flag = 0; + } + } + } + } + ep_num++; + ep_intr >>= 1; + } +} + +static void process_ep_out_intr(struct s3c_udc *dev) +{ + u32 ep_intr, ep_intr_status; + u8 ep_num = 0; + + ep_intr = readl(®->daint); + DEBUG_OUT_EP("*** %s: EP OUT interrupt : DAINT = 0x%x\n", + __func__, ep_intr); + + ep_intr = (ep_intr >> DAINT_OUT_BIT) & DAINT_MASK; + + while (ep_intr) { + if (ep_intr & 0x1) { + ep_intr_status = readl(®->out_endp[ep_num].doepint); + DEBUG_OUT_EP("\tEP%d-OUT : DOEPINT = 0x%x\n", + ep_num, ep_intr_status); + + /* Interrupt Clear */ + writel(ep_intr_status, ®->out_endp[ep_num].doepint); + + if (ep_num == 0) { + if (ep_intr_status & TRANSFER_DONE) { + if (dev->ep0state != + WAIT_FOR_OUT_COMPLETE) + complete_rx(dev, ep_num); + else { + dev->ep0state = WAIT_FOR_SETUP; + s3c_udc_pre_setup(); + } + } + + if (ep_intr_status & + CTRL_OUT_EP_SETUP_PHASE_DONE) { + DEBUG_OUT_EP("SETUP packet arrived\n"); + s3c_handle_ep0(dev); + } + } else { + if (ep_intr_status & TRANSFER_DONE) + complete_rx(dev, ep_num); + } + } + ep_num++; + ep_intr >>= 1; + } +} + +/* + * usb client interrupt handler. + */ +static int s3c_udc_irq(int irq, void *_dev) +{ + struct s3c_udc *dev = _dev; + u32 intr_status; + u32 usb_status, gintmsk; + unsigned long flags; + + spin_lock_irqsave(&dev->lock, flags); + + intr_status = readl(®->gintsts); + gintmsk = readl(®->gintmsk); + + DEBUG_ISR("\n*** %s : GINTSTS=0x%x(on state %s), GINTMSK : 0x%x," + "DAINT : 0x%x, DAINTMSK : 0x%x\n", + __func__, intr_status, state_names[dev->ep0state], gintmsk, + readl(®->daint), readl(®->daintmsk)); + + if (!intr_status) { + spin_unlock_irqrestore(&dev->lock, flags); + return IRQ_HANDLED; + } + + if (intr_status & INT_ENUMDONE) { + DEBUG_ISR("\tSpeed Detection interrupt\n"); + + writel(INT_ENUMDONE, ®->gintsts); + usb_status = (readl(®->dsts) & 0x6); + + if (usb_status & (USB_FULL_30_60MHZ | USB_FULL_48MHZ)) { + DEBUG_ISR("\t\tFull Speed Detection\n"); + set_max_pktsize(dev, USB_SPEED_FULL); + + } else { + DEBUG_ISR("\t\tHigh Speed Detection : 0x%x\n", + usb_status); + set_max_pktsize(dev, USB_SPEED_HIGH); + } + } + + if (intr_status & INT_EARLY_SUSPEND) { + DEBUG_ISR("\tEarly suspend interrupt\n"); + writel(INT_EARLY_SUSPEND, ®->gintsts); + } + + if (intr_status & INT_SUSPEND) { + usb_status = readl(®->dsts); + DEBUG_ISR("\tSuspend interrupt :(DSTS):0x%x\n", usb_status); + writel(INT_SUSPEND, ®->gintsts); + + if (dev->gadget.speed != USB_SPEED_UNKNOWN + && dev->driver) { + if (dev->driver->suspend) + dev->driver->suspend(&dev->gadget); + + /* HACK to let gadget detect disconnected state */ + if (dev->driver->disconnect) { + spin_unlock_irqrestore(&dev->lock, flags); + dev->driver->disconnect(&dev->gadget); + spin_lock_irqsave(&dev->lock, flags); + } + } + } + + if (intr_status & INT_RESUME) { + DEBUG_ISR("\tResume interrupt\n"); + writel(INT_RESUME, ®->gintsts); + + if (dev->gadget.speed != USB_SPEED_UNKNOWN + && dev->driver + && dev->driver->resume) { + + dev->driver->resume(&dev->gadget); + } + } + + if (intr_status & INT_RESET) { + usb_status = readl(®->gotgctl); + DEBUG_ISR("\tReset interrupt - (GOTGCTL):0x%x\n", usb_status); + writel(INT_RESET, ®->gintsts); + + if ((usb_status & 0xc0000) == (0x3 << 18)) { + if (reset_available) { + DEBUG_ISR("\t\tOTG core got reset (%d)!!\n", + reset_available); + reconfig_usbd(); + dev->ep0state = WAIT_FOR_SETUP; + reset_available = 0; + s3c_udc_pre_setup(); + } else + reset_available = 1; + + } else { + reset_available = 1; + DEBUG_ISR("\t\tRESET handling skipped\n"); + } + } + + if (intr_status & INT_IN_EP) + process_ep_in_intr(dev); + + if (intr_status & INT_OUT_EP) + process_ep_out_intr(dev); + + spin_unlock_irqrestore(&dev->lock, flags); + + return IRQ_HANDLED; +} + +/** Queue one request + * Kickstart transfer if needed + */ +static int s3c_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t gfp_flags) +{ + struct s3c_request *req; + struct s3c_ep *ep; + struct s3c_udc *dev; + unsigned long flags; + u32 ep_num, gintsts; + + req = container_of(_req, struct s3c_request, req); + if (unlikely(!_req || !_req->complete || !_req->buf + || !list_empty(&req->queue))) { + + DEBUG("%s: bad params\n", __func__); + return -EINVAL; + } + + ep = container_of(_ep, struct s3c_ep, ep); + + if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) { + + DEBUG("%s: bad ep: %s, %d, %x\n", __func__, + ep->ep.name, !ep->desc, _ep); + return -EINVAL; + } + + ep_num = ep_index(ep); + dev = ep->dev; + if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) { + + DEBUG("%s: bogus device state %p\n", __func__, dev->driver); + return -ESHUTDOWN; + } + + spin_lock_irqsave(&dev->lock, flags); + + _req->status = -EINPROGRESS; + _req->actual = 0; + + /* kickstart this i/o queue? */ + DEBUG("\n*** %s: %s-%s req = %p, len = %d, buf = %p" + "Q empty = %d, stopped = %d\n", + __func__, _ep->name, ep_is_in(ep) ? "in" : "out", + _req, _req->length, _req->buf, + list_empty(&ep->queue), ep->stopped); + +#ifdef DEBUG_S3C_UDC + { + int i, len = _req->length; + + printf("pkt = "); + if (len > 64) + len = 64; + for (i = 0; i < len; i++) { + printf("%02x", ((u8 *)_req->buf)[i]); + if ((i & 7) == 7) + printf(" "); + } + printf("\n"); + } +#endif + + if (list_empty(&ep->queue) && !ep->stopped) { + + if (ep_num == 0) { + /* EP0 */ + list_add_tail(&req->queue, &ep->queue); + s3c_ep0_kick(dev, ep); + req = 0; + + } else if (ep_is_in(ep)) { + gintsts = readl(®->gintsts); + DEBUG_IN_EP("%s: ep_is_in, S3C_UDC_OTG_GINTSTS=0x%x\n", + __func__, gintsts); + + setdma_tx(ep, req); + } else { + gintsts = readl(®->gintsts); + DEBUG_OUT_EP("%s:ep_is_out, S3C_UDC_OTG_GINTSTS=0x%x\n", + __func__, gintsts); + + setdma_rx(ep, req); + } + } + + /* pio or dma irq handler advances the queue. */ + if (likely(req != 0)) + list_add_tail(&req->queue, &ep->queue); + + spin_unlock_irqrestore(&dev->lock, flags); + + return 0; +} + +/****************************************************************/ +/* End Point 0 related functions */ +/****************************************************************/ + +/* return: 0 = still running, 1 = completed, negative = errno */ +static int write_fifo_ep0(struct s3c_ep *ep, struct s3c_request *req) +{ + u32 max; + unsigned count; + int is_last; + + max = ep_maxpacket(ep); + + DEBUG_EP0("%s: max = %d\n", __func__, max); + + count = setdma_tx(ep, req); + + /* last packet is usually short (or a zlp) */ + if (likely(count != max)) + is_last = 1; + else { + if (likely(req->req.length != req->req.actual + count) + || req->req.zero) + is_last = 0; + else + is_last = 1; + } + + DEBUG_EP0("%s: wrote %s %d bytes%s %d left %p\n", __func__, + ep->ep.name, count, + is_last ? "/L" : "", + req->req.length - req->req.actual - count, req); + + /* requests complete when all IN data is in the FIFO */ + if (is_last) { + ep->dev->ep0state = WAIT_FOR_SETUP; + return 1; + } + + return 0; +} + +int s3c_fifo_read(struct s3c_ep *ep, u32 *cp, int max) +{ + u32 bytes; + + bytes = sizeof(struct usb_ctrlrequest); + + invalidate_dcache_range((unsigned long) ep->dev->dma_buf[ep_index(ep)], + (unsigned long) ep->dev->dma_buf[ep_index(ep)] + + DMA_BUFFER_SIZE); + + DEBUG_EP0("%s: bytes=%d, ep_index=%d %p\n", __func__, + bytes, ep_index(ep), ep->dev->dma_buf[ep_index(ep)]); + + return bytes; +} + +/** + * udc_set_address - set the USB address for this device + * @address: + * + * Called from control endpoint function + * after it decodes a set address setup packet. + */ +static void udc_set_address(struct s3c_udc *dev, unsigned char address) +{ + u32 ctrl = readl(®->dcfg); + writel(DEVICE_ADDRESS(address) | ctrl, ®->dcfg); + + s3c_udc_ep0_zlp(dev); + + DEBUG_EP0("%s: USB OTG 2.0 Device address=%d, DCFG=0x%x\n", + __func__, address, readl(®->dcfg)); + + dev->usb_address = address; +} + +static inline void s3c_udc_ep0_set_stall(struct s3c_ep *ep) +{ + struct s3c_udc *dev; + u32 ep_ctrl = 0; + + dev = ep->dev; + ep_ctrl = readl(®->in_endp[EP0_CON].diepctl); + + /* set the disable and stall bits */ + if (ep_ctrl & DEPCTL_EPENA) + ep_ctrl |= DEPCTL_EPDIS; + + ep_ctrl |= DEPCTL_STALL; + + writel(ep_ctrl, ®->in_endp[EP0_CON].diepctl); + + DEBUG_EP0("%s: set ep%d stall, DIEPCTL0 = 0x%x\n", + __func__, ep_index(ep), ®->in_endp[EP0_CON].diepctl); + /* + * The application can only set this bit, and the core clears it, + * when a SETUP token is received for this endpoint + */ + dev->ep0state = WAIT_FOR_SETUP; + + s3c_udc_pre_setup(); +} + +static void s3c_ep0_read(struct s3c_udc *dev) +{ + struct s3c_request *req; + struct s3c_ep *ep = &dev->ep[0]; + int ret; + + if (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct s3c_request, queue); + + } else { + DEBUG("%s: ---> BUG\n", __func__); + BUG(); + return; + } + + DEBUG_EP0("%s: req = %p, req.length = 0x%x, req.actual = 0x%x\n", + __func__, req, req->req.length, req->req.actual); + + if (req->req.length == 0) { + /* zlp for Set_configuration, Set_interface, + * or Bulk-Only mass storge reset */ + + ep->len = 0; + s3c_udc_ep0_zlp(dev); + + DEBUG_EP0("%s: req.length = 0, bRequest = %d\n", + __func__, usb_ctrl->bRequest); + return; + } + + ret = setdma_rx(ep, req); +} + +/* + * DATA_STATE_XMIT + */ +static int s3c_ep0_write(struct s3c_udc *dev) +{ + struct s3c_request *req; + struct s3c_ep *ep = &dev->ep[0]; + int ret, need_zlp = 0; + + if (list_empty(&ep->queue)) + req = 0; + else + req = list_entry(ep->queue.next, struct s3c_request, queue); + + if (!req) { + DEBUG_EP0("%s: NULL REQ\n", __func__); + return 0; + } + + DEBUG_EP0("%s: req = %p, req.length = 0x%x, req.actual = 0x%x\n", + __func__, req, req->req.length, req->req.actual); + + if (req->req.length - req->req.actual == ep0_fifo_size) { + /* Next write will end with the packet size, */ + /* so we need Zero-length-packet */ + need_zlp = 1; + } + + ret = write_fifo_ep0(ep, req); + + if ((ret == 1) && !need_zlp) { + /* Last packet */ + dev->ep0state = WAIT_FOR_COMPLETE; + DEBUG_EP0("%s: finished, waiting for status\n", __func__); + + } else { + dev->ep0state = DATA_STATE_XMIT; + DEBUG_EP0("%s: not finished\n", __func__); + } + + return 1; +} + +u16 g_status; + +int s3c_udc_get_status(struct s3c_udc *dev, + struct usb_ctrlrequest *crq) +{ + u8 ep_num = crq->wIndex & 0x7F; + u32 ep_ctrl; + u32 *p = the_controller->dma_buf[1]; + + DEBUG_SETUP("%s: *** USB_REQ_GET_STATUS\n", __func__); + printf("crq->brequest:0x%x\n", crq->bRequestType & USB_RECIP_MASK); + switch (crq->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_INTERFACE: + g_status = 0; + DEBUG_SETUP("\tGET_STATUS:USB_RECIP_INTERFACE, g_stauts = %d\n", + g_status); + break; + + case USB_RECIP_DEVICE: + g_status = 0x1; /* Self powered */ + DEBUG_SETUP("\tGET_STATUS: USB_RECIP_DEVICE, g_stauts = %d\n", + g_status); + break; + + case USB_RECIP_ENDPOINT: + if (crq->wLength > 2) { + DEBUG_SETUP("\tGET_STATUS:Not support EP or wLength\n"); + return 1; + } + + g_status = dev->ep[ep_num].stopped; + DEBUG_SETUP("\tGET_STATUS: USB_RECIP_ENDPOINT, g_stauts = %d\n", + g_status); + + break; + + default: + return 1; + } + + memcpy(p, &g_status, sizeof(g_status)); + + flush_dcache_range((unsigned long) p, + (unsigned long) p + DMA_BUFFER_SIZE); + + writel(the_controller->dma_addr[1], ®->in_endp[EP0_CON].diepdma); + writel(DIEPT_SIZ_PKT_CNT(1) | DIEPT_SIZ_XFER_SIZE(2), + ®->in_endp[EP0_CON].dieptsiz); + + ep_ctrl = readl(®->in_endp[EP0_CON].diepctl); + writel(ep_ctrl|DEPCTL_EPENA|DEPCTL_CNAK, + ®->in_endp[EP0_CON].diepctl); + dev->ep0state = WAIT_FOR_NULL_COMPLETE; + + return 0; +} + +static void s3c_udc_set_nak(struct s3c_ep *ep) +{ + u8 ep_num; + u32 ep_ctrl = 0; + + ep_num = ep_index(ep); + DEBUG("%s: ep_num = %d, ep_type = %d\n", __func__, ep_num, ep->ep_type); + + if (ep_is_in(ep)) { + ep_ctrl = readl(®->in_endp[ep_num].diepctl); + ep_ctrl |= DEPCTL_SNAK; + writel(ep_ctrl, ®->in_endp[ep_num].diepctl); + DEBUG("%s: set NAK, DIEPCTL%d = 0x%x\n", + __func__, ep_num, readl(®->in_endp[ep_num].diepctl)); + } else { + ep_ctrl = readl(®->out_endp[ep_num].doepctl); + ep_ctrl |= DEPCTL_SNAK; + writel(ep_ctrl, ®->out_endp[ep_num].doepctl); + DEBUG("%s: set NAK, DOEPCTL%d = 0x%x\n", + __func__, ep_num, readl(®->out_endp[ep_num].doepctl)); + } + + return; +} + + +void s3c_udc_ep_set_stall(struct s3c_ep *ep) +{ + u8 ep_num; + u32 ep_ctrl = 0; + + ep_num = ep_index(ep); + DEBUG("%s: ep_num = %d, ep_type = %d\n", __func__, ep_num, ep->ep_type); + + if (ep_is_in(ep)) { + ep_ctrl = readl(®->in_endp[ep_num].diepctl); + + /* set the disable and stall bits */ + if (ep_ctrl & DEPCTL_EPENA) + ep_ctrl |= DEPCTL_EPDIS; + + ep_ctrl |= DEPCTL_STALL; + + writel(ep_ctrl, ®->in_endp[ep_num].diepctl); + DEBUG("%s: set stall, DIEPCTL%d = 0x%x\n", + __func__, ep_num, readl(®->in_endp[ep_num].diepctl)); + + } else { + ep_ctrl = readl(®->out_endp[ep_num].doepctl); + + /* set the stall bit */ + ep_ctrl |= DEPCTL_STALL; + + writel(ep_ctrl, ®->out_endp[ep_num].doepctl); + DEBUG("%s: set stall, DOEPCTL%d = 0x%x\n", + __func__, ep_num, readl(®->out_endp[ep_num].doepctl)); + } + + return; +} + +void s3c_udc_ep_clear_stall(struct s3c_ep *ep) +{ + u8 ep_num; + u32 ep_ctrl = 0; + + ep_num = ep_index(ep); + DEBUG("%s: ep_num = %d, ep_type = %d\n", __func__, ep_num, ep->ep_type); + + if (ep_is_in(ep)) { + ep_ctrl = readl(®->in_endp[ep_num].diepctl); + + /* clear stall bit */ + ep_ctrl &= ~DEPCTL_STALL; + + /* + * USB Spec 9.4.5: For endpoints using data toggle, regardless + * of whether an endpoint has the Halt feature set, a + * ClearFeature(ENDPOINT_HALT) request always results in the + * data toggle being reinitialized to DATA0. + */ + if (ep->bmAttributes == USB_ENDPOINT_XFER_INT + || ep->bmAttributes == USB_ENDPOINT_XFER_BULK) { + ep_ctrl |= DEPCTL_SETD0PID; /* DATA0 */ + } + + writel(ep_ctrl, ®->in_endp[ep_num].diepctl); + DEBUG("%s: cleared stall, DIEPCTL%d = 0x%x\n", + __func__, ep_num, readl(®->in_endp[ep_num].diepctl)); + + } else { + ep_ctrl = readl(®->out_endp[ep_num].doepctl); + + /* clear stall bit */ + ep_ctrl &= ~DEPCTL_STALL; + + if (ep->bmAttributes == USB_ENDPOINT_XFER_INT + || ep->bmAttributes == USB_ENDPOINT_XFER_BULK) { + ep_ctrl |= DEPCTL_SETD0PID; /* DATA0 */ + } + + writel(ep_ctrl, ®->out_endp[ep_num].doepctl); + DEBUG("%s: cleared stall, DOEPCTL%d = 0x%x\n", + __func__, ep_num, readl(®->out_endp[ep_num].doepctl)); + } + + return; +} + +static int s3c_udc_set_halt(struct usb_ep *_ep, int value) +{ + struct s3c_ep *ep; + struct s3c_udc *dev; + unsigned long flags; + u8 ep_num; + + ep = container_of(_ep, struct s3c_ep, ep); + ep_num = ep_index(ep); + + if (unlikely(!_ep || !ep->desc || ep_num == EP0_CON || + ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC)) { + DEBUG("%s: %s bad ep or descriptor\n", __func__, ep->ep.name); + return -EINVAL; + } + + /* Attempt to halt IN ep will fail if any transfer requests + * are still queue */ + if (value && ep_is_in(ep) && !list_empty(&ep->queue)) { + DEBUG("%s: %s queue not empty, req = %p\n", + __func__, ep->ep.name, + list_entry(ep->queue.next, struct s3c_request, queue)); + + return -EAGAIN; + } + + dev = ep->dev; + DEBUG("%s: ep_num = %d, value = %d\n", __func__, ep_num, value); + + spin_lock_irqsave(&dev->lock, flags); + + if (value == 0) { + ep->stopped = 0; + s3c_udc_ep_clear_stall(ep); + } else { + if (ep_num == 0) + dev->ep0state = WAIT_FOR_SETUP; + + ep->stopped = 1; + s3c_udc_ep_set_stall(ep); + } + + spin_unlock_irqrestore(&dev->lock, flags); + + return 0; +} + +void s3c_udc_ep_activate(struct s3c_ep *ep) +{ + u8 ep_num; + u32 ep_ctrl = 0, daintmsk = 0; + + ep_num = ep_index(ep); + + /* Read DEPCTLn register */ + if (ep_is_in(ep)) { + ep_ctrl = readl(®->in_endp[ep_num].diepctl); + daintmsk = 1 << ep_num; + } else { + ep_ctrl = readl(®->out_endp[ep_num].doepctl); + daintmsk = (1 << ep_num) << DAINT_OUT_BIT; + } + + DEBUG("%s: EPCTRL%d = 0x%x, ep_is_in = %d\n", + __func__, ep_num, ep_ctrl, ep_is_in(ep)); + + /* If the EP is already active don't change the EP Control + * register. */ + if (!(ep_ctrl & DEPCTL_USBACTEP)) { + ep_ctrl = (ep_ctrl & ~DEPCTL_TYPE_MASK) | + (ep->bmAttributes << DEPCTL_TYPE_BIT); + ep_ctrl = (ep_ctrl & ~DEPCTL_MPS_MASK) | + (ep->ep.maxpacket << DEPCTL_MPS_BIT); + ep_ctrl |= (DEPCTL_SETD0PID | DEPCTL_USBACTEP | DEPCTL_SNAK); + + if (ep_is_in(ep)) { + writel(ep_ctrl, ®->in_endp[ep_num].diepctl); + DEBUG("%s: USB Ative EP%d, DIEPCTRL%d = 0x%x\n", + __func__, ep_num, ep_num, + readl(®->in_endp[ep_num].diepctl)); + } else { + writel(ep_ctrl, ®->out_endp[ep_num].doepctl); + DEBUG("%s: USB Ative EP%d, DOEPCTRL%d = 0x%x\n", + __func__, ep_num, ep_num, + readl(®->out_endp[ep_num].doepctl)); + } + } + + /* Unmask EP Interrtupt */ + writel(readl(®->daintmsk)|daintmsk, ®->daintmsk); + DEBUG("%s: DAINTMSK = 0x%x\n", __func__, readl(®->daintmsk)); + +} + +static int s3c_udc_clear_feature(struct usb_ep *_ep) +{ + struct s3c_udc *dev; + struct s3c_ep *ep; + u8 ep_num; + + ep = container_of(_ep, struct s3c_ep, ep); + ep_num = ep_index(ep); + + dev = ep->dev; + DEBUG_SETUP("%s: ep_num = %d, is_in = %d, clear_feature_flag = %d\n", + __func__, ep_num, ep_is_in(ep), clear_feature_flag); + + if (usb_ctrl->wLength != 0) { + DEBUG_SETUP("\tCLEAR_FEATURE: wLength is not zero.....\n"); + return 1; + } + + switch (usb_ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + switch (usb_ctrl->wValue) { + case USB_DEVICE_REMOTE_WAKEUP: + DEBUG_SETUP("\tOFF:USB_DEVICE_REMOTE_WAKEUP\n"); + break; + + case USB_DEVICE_TEST_MODE: + DEBUG_SETUP("\tCLEAR_FEATURE: USB_DEVICE_TEST_MODE\n"); + /** @todo Add CLEAR_FEATURE for TEST modes. */ + break; + } + + s3c_udc_ep0_zlp(dev); + break; + + case USB_RECIP_ENDPOINT: + DEBUG_SETUP("\tCLEAR_FEATURE:USB_RECIP_ENDPOINT, wValue = %d\n", + usb_ctrl->wValue); + + if (usb_ctrl->wValue == USB_ENDPOINT_HALT) { + if (ep_num == 0) { + s3c_udc_ep0_set_stall(ep); + return 0; + } + + s3c_udc_ep0_zlp(dev); + + s3c_udc_ep_clear_stall(ep); + s3c_udc_ep_activate(ep); + ep->stopped = 0; + + clear_feature_num = ep_num; + clear_feature_flag = 1; + } + break; + } + + return 0; +} + +static int s3c_udc_set_feature(struct usb_ep *_ep) +{ + struct s3c_udc *dev; + struct s3c_ep *ep; + u8 ep_num; + + ep = container_of(_ep, struct s3c_ep, ep); + ep_num = ep_index(ep); + dev = ep->dev; + + DEBUG_SETUP("%s: *** USB_REQ_SET_FEATURE , ep_num = %d\n", + __func__, ep_num); + + if (usb_ctrl->wLength != 0) { + DEBUG_SETUP("\tSET_FEATURE: wLength is not zero.....\n"); + return 1; + } + + switch (usb_ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + switch (usb_ctrl->wValue) { + case USB_DEVICE_REMOTE_WAKEUP: + DEBUG_SETUP("\tSET_FEATURE:USB_DEVICE_REMOTE_WAKEUP\n"); + break; + case USB_DEVICE_B_HNP_ENABLE: + DEBUG_SETUP("\tSET_FEATURE: USB_DEVICE_B_HNP_ENABLE\n"); + break; + + case USB_DEVICE_A_HNP_SUPPORT: + /* RH port supports HNP */ + DEBUG_SETUP("\tSET_FEATURE:USB_DEVICE_A_HNP_SUPPORT\n"); + break; + + case USB_DEVICE_A_ALT_HNP_SUPPORT: + /* other RH port does */ + DEBUG_SETUP("\tSET: USB_DEVICE_A_ALT_HNP_SUPPORT\n"); + break; + } + + s3c_udc_ep0_zlp(dev); + return 0; + + case USB_RECIP_INTERFACE: + DEBUG_SETUP("\tSET_FEATURE: USB_RECIP_INTERFACE\n"); + break; + + case USB_RECIP_ENDPOINT: + DEBUG_SETUP("\tSET_FEATURE: USB_RECIP_ENDPOINT\n"); + if (usb_ctrl->wValue == USB_ENDPOINT_HALT) { + if (ep_num == 0) { + s3c_udc_ep0_set_stall(ep); + return 0; + } + ep->stopped = 1; + s3c_udc_ep_set_stall(ep); + } + + s3c_udc_ep0_zlp(dev); + return 0; + } + + return 1; +} + +/* + * WAIT_FOR_SETUP (OUT_PKT_RDY) + */ +void s3c_ep0_setup(struct s3c_udc *dev) +{ + struct s3c_ep *ep = &dev->ep[0]; + int i, bytes, is_in; + u8 ep_num; + + /* Nuke all previous transfers */ + nuke(ep, -EPROTO); + + /* read control req from fifo (8 bytes) */ + bytes = s3c_fifo_read(ep, (u32 *)usb_ctrl, 8); + + DEBUG_SETUP("%s: bRequestType = 0x%x(%s), bRequest = 0x%x" + "\twLength = 0x%x, wValue = 0x%x, wIndex= 0x%x\n", + __func__, usb_ctrl->bRequestType, + (usb_ctrl->bRequestType & USB_DIR_IN) ? "IN" : "OUT", + usb_ctrl->bRequest, + usb_ctrl->wLength, usb_ctrl->wValue, usb_ctrl->wIndex); + +#ifdef DEBUG_S3C_UDC + { + int i, len = sizeof(*usb_ctrl); + char *p = usb_ctrl; + + printf("pkt = "); + for (i = 0; i < len; i++) { + printf("%02x", ((u8 *)p)[i]); + if ((i & 7) == 7) + printf(" "); + } + printf("\n"); + } +#endif + + if (usb_ctrl->bRequest == GET_MAX_LUN_REQUEST && + usb_ctrl->wLength != 1) { + DEBUG_SETUP("\t%s:GET_MAX_LUN_REQUEST:invalid", + __func__); + DEBUG_SETUP("wLength = %d, setup returned\n", + usb_ctrl->wLength); + + s3c_udc_ep0_set_stall(ep); + dev->ep0state = WAIT_FOR_SETUP; + + return; + } else if (usb_ctrl->bRequest == BOT_RESET_REQUEST && + usb_ctrl->wLength != 0) { + /* Bulk-Only *mass storge reset of class-specific request */ + DEBUG_SETUP("%s:BOT Rest:invalid wLength =%d, setup returned\n", + __func__, usb_ctrl->wLength); + + s3c_udc_ep0_set_stall(ep); + dev->ep0state = WAIT_FOR_SETUP; + + return; + } + + /* Set direction of EP0 */ + if (likely(usb_ctrl->bRequestType & USB_DIR_IN)) { + ep->bEndpointAddress |= USB_DIR_IN; + is_in = 1; + + } else { + ep->bEndpointAddress &= ~USB_DIR_IN; + is_in = 0; + } + /* cope with automagic for some standard requests. */ + dev->req_std = (usb_ctrl->bRequestType & USB_TYPE_MASK) + == USB_TYPE_STANDARD; + dev->req_config = 0; + dev->req_pending = 1; + + /* Handle some SETUP packets ourselves */ + if (dev->req_std) { + switch (usb_ctrl->bRequest) { + case USB_REQ_SET_ADDRESS: + DEBUG_SETUP("%s: *** USB_REQ_SET_ADDRESS (%d)\n", + __func__, usb_ctrl->wValue); + if (usb_ctrl->bRequestType + != (USB_TYPE_STANDARD | USB_RECIP_DEVICE)) + break; + + udc_set_address(dev, usb_ctrl->wValue); + return; + + case USB_REQ_SET_CONFIGURATION: + DEBUG_SETUP("=====================================\n"); + DEBUG_SETUP("%s: USB_REQ_SET_CONFIGURATION (%d)\n", + __func__, usb_ctrl->wValue); + + if (usb_ctrl->bRequestType == USB_RECIP_DEVICE) { + reset_available = 1; + dev->req_config = 1; + } + break; + + case USB_REQ_GET_DESCRIPTOR: + DEBUG_SETUP("%s: *** USB_REQ_GET_DESCRIPTOR\n", + __func__); + break; + + case USB_REQ_SET_INTERFACE: + DEBUG_SETUP("%s: *** USB_REQ_SET_INTERFACE (%d)\n", + __func__, usb_ctrl->wValue); + + if (usb_ctrl->bRequestType == USB_RECIP_INTERFACE) { + reset_available = 1; + dev->req_config = 1; + } + break; + + case USB_REQ_GET_CONFIGURATION: + DEBUG_SETUP("%s: *** USB_REQ_GET_CONFIGURATION\n", + __func__); + break; + + case USB_REQ_GET_STATUS: + if (!s3c_udc_get_status(dev, usb_ctrl)) + return; + + break; + + case USB_REQ_CLEAR_FEATURE: + ep_num = usb_ctrl->wIndex & 0x7f; + + if (!s3c_udc_clear_feature(&dev->ep[ep_num].ep)) + return; + + break; + + case USB_REQ_SET_FEATURE: + ep_num = usb_ctrl->wIndex & 0x7f; + + if (!s3c_udc_set_feature(&dev->ep[ep_num].ep)) + return; + + break; + + default: + DEBUG_SETUP("%s: *** Default of usb_ctrl->bRequest=0x%x" + "happened.\n", __func__, usb_ctrl->bRequest); + break; + } + } + + + if (likely(dev->driver)) { + /* device-2-host (IN) or no data setup command, + * process immediately */ + DEBUG_SETUP("%s:usb_ctrlreq will be passed to fsg_setup()\n", + __func__); + + spin_unlock(&dev->lock); + i = dev->driver->setup(&dev->gadget, usb_ctrl); + spin_lock(&dev->lock); + + if (i < 0) { + if (dev->req_config) { + DEBUG_SETUP("\tconfig change 0x%02x fail %d?\n", + (u32)usb_ctrl->bRequest, i); + return; + } + + /* setup processing failed, force stall */ + s3c_udc_ep0_set_stall(ep); + dev->ep0state = WAIT_FOR_SETUP; + + DEBUG_SETUP("\tdev->driver->setup failed (%d)," + " bRequest = %d\n", + i, usb_ctrl->bRequest); + + + } else if (dev->req_pending) { + dev->req_pending = 0; + DEBUG_SETUP("\tdev->req_pending...\n"); + } + + DEBUG_SETUP("\tep0state = %s\n", state_names[dev->ep0state]); + + } +} + +/* + * handle ep0 interrupt + */ +static void s3c_handle_ep0(struct s3c_udc *dev) +{ + if (dev->ep0state == WAIT_FOR_SETUP) { + DEBUG_OUT_EP("%s: WAIT_FOR_SETUP\n", __func__); + s3c_ep0_setup(dev); + + } else { + DEBUG_OUT_EP("%s: strange state!!(state = %s)\n", + __func__, state_names[dev->ep0state]); + } +} + +static void s3c_ep0_kick(struct s3c_udc *dev, struct s3c_ep *ep) +{ + DEBUG_EP0("%s: ep_is_in = %d\n", __func__, ep_is_in(ep)); + if (ep_is_in(ep)) { + dev->ep0state = DATA_STATE_XMIT; + s3c_ep0_write(dev); + + } else { + dev->ep0state = DATA_STATE_RECV; + s3c_ep0_read(dev); + } +} diff --git a/include/usb/lin_gadget_compat.h b/include/usb/lin_gadget_compat.h new file mode 100644 index 0000000..9b31511 --- /dev/null +++ b/include/usb/lin_gadget_compat.h @@ -0,0 +1,62 @@ +/* + * Copyright (c) 2011 Samsung Electronics + * Lukasz Majewski + * + * This is a Linux kernel compatibility layer for USB Gadget + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __LIN_COMPAT_H__ +#define __LIN_COMPAT_H__ + +/* common */ +#define spin_lock_init(...) +#define spin_lock(...) +#define spin_lock_irqsave(lock, flags) do {flags = 1; } while (0) +#define spin_unlock(...) +#define spin_unlock_irqrestore(lock, flags) do {flags = 0; } while (0) +#define disable_irq(...) +#define enable_irq(...) + +#define mutex_init(...) +#define mutex_lock(...) +#define mutex_unlock(...) + +#define WARN_ON(x) if (x) {printf("WARNING in %s line %d\n" \ + , __FILE__, __LINE__); } + +#define KERN_WARNING +#define KERN_ERR +#define KERN_NOTICE +#define KERN_DEBUG + +#define GFP_KERNEL 0 + +#define IRQ_HANDLED 1 + +#define ENOTSUPP 524 /* Operation is not supported */ + +#define kmalloc(size, type) memalign(CONFIG_SYS_CACHELINE_SIZE, size) +#define kfree(addr) free(addr) +#define mdelay(n) ({unsigned long msec = (n); while (msec--) udelay(1000); }) + +#define __iomem +#define min_t min +#define dma_cache_maint(addr, size, mode) cache_flush() +void cache_flush(void); + +#endif /* __LIN_COMPAT_H__ */ diff --git a/include/usb/s3c_udc.h b/include/usb/s3c_udc.h new file mode 100644 index 0000000..14dadc8 --- /dev/null +++ b/include/usb/s3c_udc.h @@ -0,0 +1,175 @@ +/* + * drivers/usb/gadget/s3c_udc.h + * Samsung S3C on-chip full/high speed USB device controllers + * Copyright (C) 2005 for Samsung Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __S3C_USB_GADGET +#define __S3C_USB_GADGET + +#include +#include +#include +#include +#include + +#define PHY0_SLEEP (1 << 5) + +/*-------------------------------------------------------------------------*/ +/* DMA bounce buffer size, 16K is enough even for mass storage */ +#define DMA_BUFFER_SIZE (4096*4) + +#define EP0_FIFO_SIZE 64 +#define EP_FIFO_SIZE 512 +#define EP_FIFO_SIZE2 1024 +/* ep0-control, ep1in-bulk, ep2out-bulk, ep3in-int */ +#define S3C_MAX_ENDPOINTS 4 +#define S3C_MAX_HW_ENDPOINTS 16 + +#define WAIT_FOR_SETUP 0 +#define DATA_STATE_XMIT 1 +#define DATA_STATE_NEED_ZLP 2 +#define WAIT_FOR_OUT_STATUS 3 +#define DATA_STATE_RECV 4 +#define WAIT_FOR_COMPLETE 5 +#define WAIT_FOR_OUT_COMPLETE 6 +#define WAIT_FOR_IN_COMPLETE 7 +#define WAIT_FOR_NULL_COMPLETE 8 + +#define TEST_J_SEL 0x1 +#define TEST_K_SEL 0x2 +#define TEST_SE0_NAK_SEL 0x3 +#define TEST_PACKET_SEL 0x4 +#define TEST_FORCE_ENABLE_SEL 0x5 + +/* ************************************************************************* */ +/* IO + */ + +enum ep_type { + ep_control, ep_bulk_in, ep_bulk_out, ep_interrupt +}; + +struct s3c_ep { + struct usb_ep ep; + struct s3c_udc *dev; + + const struct usb_endpoint_descriptor *desc; + struct list_head queue; + unsigned long pio_irqs; + int len; + void *dma_buf; + + u8 stopped; + u8 bEndpointAddress; + u8 bmAttributes; + + enum ep_type ep_type; + int fifo_num; +}; + +struct s3c_request { + struct usb_request req; + struct list_head queue; +}; + +struct s3c_udc { + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + + struct s3c_plat_otg_data *pdata; + + void *dma_buf[S3C_MAX_ENDPOINTS+1]; + dma_addr_t dma_addr[S3C_MAX_ENDPOINTS+1]; + + int ep0state; + struct s3c_ep ep[S3C_MAX_ENDPOINTS]; + + unsigned char usb_address; + + unsigned req_pending:1, req_std:1, req_config:1; +}; + +extern struct s3c_udc *the_controller; + +#define ep_is_in(EP) (((EP)->bEndpointAddress&USB_DIR_IN) == USB_DIR_IN) +#define ep_index(EP) ((EP)->bEndpointAddress&0xF) +#define ep_maxpacket(EP) ((EP)->ep.maxpacket) + +/*-------------------------------------------------------------------------*/ +/* #define DEBUG_UDC */ +#ifdef DEBUG_UDC +#define DBG(stuff...) printf("udc: " stuff) +#else +#define DBG(stuff...) do {} while (0) +#endif + +#ifdef DEBUG_S3C_UDC_SETUP +#define DEBUG_SETUP(fmt, args...) printk(fmt, ##args) +#else +#define DEBUG_SETUP(fmt, args...) do {} while (0) +#endif + +#ifdef DEBUG_S3C_UDC_EP0 +#define DEBUG_EP0(fmt, args...) printk(fmt, ##args) +#else +#define DEBUG_EP0(fmt, args...) do {} while (0) +#endif + +#ifdef DEBUG_S3C_UDC +#define DEBUG(fmt, args...) printk(fmt, ##args) +#else +#define DEBUG(fmt, args...) do {} while (0) +#endif + +#ifdef DEBUG_S3C_UDC_ISR +#define DEBUG_ISR(fmt, args...) printk(fmt, ##args) +#else +#define DEBUG_ISR(fmt, args...) do {} while (0) +#endif + +#ifdef DEBUG_S3C_UDC_OUT_EP +#define DEBUG_OUT_EP(fmt, args...) printk(fmt, ##args) +#else +#define DEBUG_OUT_EP(fmt, args...) do {} while (0) +#endif + +#ifdef DEBUG_S3C_UDC_IN_EP +#define DEBUG_IN_EP(fmt, args...) printk(fmt, ##args) +#else +#define DEBUG_IN_EP(fmt, args...) do {} while (0) +#endif + +#define ERR(stuff...) printf("ERR udc: " stuff) +#define WARN(stuff...) printf("WARNING udc: " stuff) +#define INFO(stuff...) printf("INFO udc: " stuff) + +extern void otg_phy_init(struct s3c_udc *dev); +extern void otg_phy_off(struct s3c_udc *dev); + +extern void s3c_udc_ep_set_stall(struct s3c_ep *ep); +extern int s3c_udc_probe(struct s3c_plat_otg_data *pdata); + +struct s3c_plat_otg_data { + int (*phy_control)(int on); + unsigned int regs_phy; + unsigned int regs_otg; + unsigned int usb_phy_ctrl; + unsigned int usb_flags; +}; +#endif -- cgit v0.10.2