From 4ce1e23b5e12283579828b3d23e8fd6e1328a7aa Mon Sep 17 00:00:00 2001 From: York Sun Date: Thu, 15 May 2008 15:26:27 -0500 Subject: Fix 8313ERDB board configuration Change LCRR clock ratio from 2 to 4 to commodate VSC7385. Correct TSEC1 vs TSEC2 assignment. Define ETHADDR and ETH1ADDR always. Signed-off-by: York Sun Signed-off-by: Timur Tabi diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 6eec240..f9fa535 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -42,9 +42,12 @@ /* * On-board devices + * + * TSEC1 is VSC switch + * TSEC2 is SoC TSEC */ #define CONFIG_VSC7385_ENET - +#define CONFIG_TSEC2 #ifdef CFG_66MHZ #define CONFIG_83XX_CLKIN 66666667 /* in Hz */ @@ -80,7 +83,7 @@ #ifdef CONFIG_VSC7385_ENET -#define CONFIG_TSEC2 +#define CONFIG_TSEC1 /* The flash address and size of the VSC7385 firmware image */ #define CONFIG_VSC7385_IMAGE 0xFE7FE000 @@ -209,7 +212,7 @@ /* * Local Bus LCRR and LBCR regs */ -#define CFG_LCRR LCRR_EADC_1 | LCRR_CLKDIV_2 /* 0x00010002 */ +#define CFG_LCRR LCRR_EADC_1 | LCRR_CLKDIV_4 #define CFG_LBC_LBCR ( 0x00040000 /* TODO */ \ | (0xFF << LBCR_BMT_SHIFT) \ | 0xF ) /* 0x0004ff0f */ @@ -523,13 +526,8 @@ */ #define CONFIG_ENV_OVERWRITE -#ifdef CONFIG_HAS_ETH0 #define CONFIG_ETHADDR 00:E0:0C:00:95:01 -#endif - -#ifdef CONFIG_HAS_ETH1 #define CONFIG_ETH1ADDR 00:E0:0C:00:95:02 -#endif #define CONFIG_IPADDR 10.0.0.2 #define CONFIG_SERVERIP 10.0.0.1 -- cgit v0.10.2