From 19b17d12549fbd670e516e40757265e406153da3 Mon Sep 17 00:00:00 2001 From: Nikhil Badola Date: Sun, 7 Jun 2015 12:28:04 +0530 Subject: drivers: usb: fsl: Return if USB_MAX_CONTROLLER_COUNT is incorrect Return if USB_MAX_CONTROLLER_COUNT hence the index of the controller to be initialised is incorrect Signed-off-by: Nikhil Badola diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 5fd618d..97b7f14 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -76,7 +76,7 @@ int ehci_hcd_init(int index, enum usb_init_type init, break; default: printf("ERROR: wrong controller index!!\n"); - break; + return -EINVAL; }; *hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength); -- cgit v0.10.2 From 4e633e465b56ac24ecec1025f492fd3147f8d20f Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 22 May 2015 18:14:22 +0200 Subject: arm: exynos: USB3 PHY base definition for Exynos5 SoCs After that change it would be possible to call samsung_get_base_usb3_phy() function to get proper base address Signed-off-by: Lukasz Majewski Cc: Minkyu Kang diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h index e739520..cb3d2cc 100644 --- a/arch/arm/include/asm/arch-exynos/cpu.h +++ b/arch/arm/include/asm/arch-exynos/cpu.h @@ -167,6 +167,7 @@ #define EXYNOS5420_USB_HOST_EHCI_BASE 0x12110000 #define EXYNOS5420_MMC_BASE 0x12200000 #define EXYNOS5420_SROMC_BASE 0x12250000 +#define EXYNOS5420_USB3PHY_BASE 0x12500000 #define EXYNOS5420_UART_BASE 0x12C00000 #define EXYNOS5420_I2C_BASE 0x12C60000 #define EXYNOS5420_I2C_8910_BASE 0x12E00000 @@ -187,7 +188,6 @@ #define EXYNOS5420_FIMD_BASE DEVICE_NOT_AVAILABLE #define EXYNOS5420_ADC_BASE DEVICE_NOT_AVAILABLE #define EXYNOS5420_MODEM_BASE DEVICE_NOT_AVAILABLE -#define EXYNOS5420_USB3PHY_BASE DEVICE_NOT_AVAILABLE #define EXYNOS5420_USB_HOST_XHCI_BASE DEVICE_NOT_AVAILABLE -- cgit v0.10.2 From a272c99d30000e5daadcf20a22df27f98ac215dd Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 22 May 2015 18:14:23 +0200 Subject: samsung: usb: phy: Support for DWC3 PHY New files, namely samsung_usb_phy.c and samsung-usb-phy-uboot.h have been added to u-boot to provide proper PHY handling at Exynos5 SoCs. This code is used thereafter in the board_usb_init() call. Signed-off-by: Lukasz Majewski Cc: Minkyu Kang Cc: Marek Vasut diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile index e455a52..02bb216 100644 --- a/drivers/usb/dwc3/Makefile +++ b/drivers/usb/dwc3/Makefile @@ -6,3 +6,4 @@ dwc3-y += gadget.o ep0.o obj-$(CONFIG_USB_DWC3_OMAP) += dwc3-omap.o obj-$(CONFIG_USB_DWC3_PHY_OMAP) += ti_usb_phy.o +obj-$(CONFIG_USB_DWC3_PHY_SAMSUNG) += samsung_usb_phy.o diff --git a/drivers/usb/dwc3/samsung_usb_phy.c b/drivers/usb/dwc3/samsung_usb_phy.c new file mode 100644 index 0000000..4220986 --- /dev/null +++ b/drivers/usb/dwc3/samsung_usb_phy.c @@ -0,0 +1,78 @@ +/** + * samsung_usb_phy.c - DesignWare USB3 (DWC3) PHY handling file + * + * Copyright (C) 2015 Samsung Electronics + * + * Author: Joonyoung Shim + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include +#include +#include + +void exynos5_usb3_phy_init(struct exynos_usb3_phy *phy) +{ + u32 reg; + + /* Reset USB 3.0 PHY */ + writel(0x0, &phy->phy_reg0); + + clrbits_le32(&phy->phy_param0, + /* Select PHY CLK source */ + PHYPARAM0_REF_USE_PAD | + /* Set Loss-of-Signal Detector sensitivity */ + PHYPARAM0_REF_LOSLEVEL_MASK); + setbits_le32(&phy->phy_param0, PHYPARAM0_REF_LOSLEVEL); + + + writel(0x0, &phy->phy_resume); + + /* + * Setting the Frame length Adj value[6:1] to default 0x20 + * See xHCI 1.0 spec, 5.2.4 + */ + setbits_le32(&phy->link_system, + LINKSYSTEM_XHCI_VERSION_CONTROL | + LINKSYSTEM_FLADJ(0x20)); + + /* Set Tx De-Emphasis level */ + clrbits_le32(&phy->phy_param1, PHYPARAM1_PCS_TXDEEMPH_MASK); + setbits_le32(&phy->phy_param1, PHYPARAM1_PCS_TXDEEMPH); + + setbits_le32(&phy->phy_batchg, PHYBATCHG_UTMI_CLKSEL); + + /* PHYTEST POWERDOWN Control */ + clrbits_le32(&phy->phy_test, + PHYTEST_POWERDOWN_SSP | + PHYTEST_POWERDOWN_HSP); + + /* UTMI Power Control */ + writel(PHYUTMI_OTGDISABLE, &phy->phy_utmi); + + /* Use core clock from main PLL */ + reg = PHYCLKRST_REFCLKSEL_EXT_REFCLK | + /* Default 24Mhz crystal clock */ + PHYCLKRST_FSEL(FSEL_CLKSEL_24M) | + PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF | + PHYCLKRST_SSC_REFCLKSEL(0) | + /* Force PortReset of PHY */ + PHYCLKRST_PORTRESET | + /* Digital power supply in normal operating mode */ + PHYCLKRST_RETENABLEN | + /* Enable ref clock for SS function */ + PHYCLKRST_REF_SSP_EN | + /* Enable spread spectrum */ + PHYCLKRST_SSC_EN | + /* Power down HS Bias and PLL blocks in suspend mode */ + PHYCLKRST_COMMONONN; + + writel(reg, &phy->phy_clk_rst); + + /* giving time to Phy clock to settle before resetting */ + udelay(10); + + reg &= ~PHYCLKRST_PORTRESET; + writel(reg, &phy->phy_clk_rst); +} diff --git a/include/samsung-usb-phy-uboot.h b/include/samsung-usb-phy-uboot.h new file mode 100644 index 0000000..9f37560 --- /dev/null +++ b/include/samsung-usb-phy-uboot.h @@ -0,0 +1,16 @@ +/* include/samsung-usb-phy-uboot.h + * + * Copyright (c) 2015 Samsung Electronics + * + * USB3 (DWC3) PHY uboot init + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __SAMSUNG_USB_PHY_UBOOT_H_ +#define __SAMSUNG_USB_PHY_UBOOT_H_ + +#include + +void exynos5_usb3_phy_init(struct exynos_usb3_phy *phy); +#endif /* __SAMSUNG_USB_PHY_UBOOT_H_ */ -- cgit v0.10.2 From 302a7d0006da530ffbb771677ea71d61b0f1cb7e Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Fri, 22 May 2015 18:14:24 +0200 Subject: smdk5420: board: add functions required to enable USB DWC3 This commit adds implementation of function calls: - usb_gadget_handle_interrupts() - board_usb_init() Which allow enable USB DWC3 gadget for this board. Signed-off-by: Joonyoung Shim Signed-off-by: Lukasz Majewski Signed-off-by: Inha Song Cc: Minkyu Kang diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c index 20dd75c..1a4e8c9 100644 --- a/board/samsung/common/board.c +++ b/board/samsung/common/board.c @@ -24,8 +24,9 @@ #include #include #include -#include #include +#include +#include DECLARE_GLOBAL_DATA_PTR; @@ -378,5 +379,8 @@ void reset_misc(void) int board_usb_cleanup(int index, enum usb_init_type init) { +#ifdef CONFIG_USB_DWC3 + dwc3_uboot_exit(index); +#endif return 0; } diff --git a/board/samsung/smdk5420/smdk5420.c b/board/samsung/smdk5420/smdk5420.c index 82f607b..8021f77 100644 --- a/board/samsung/smdk5420/smdk5420.c +++ b/board/samsung/smdk5420/smdk5420.c @@ -6,19 +6,24 @@ #include #include -#include -#include -#include -#include -#include #include +#include #include -#include #include -#include +#include +#include #include +#include #include +#include #include +#include +#include +#include +#include +#include +#include +#include DECLARE_GLOBAL_DATA_PTR; @@ -75,3 +80,34 @@ int board_get_revision(void) { return 0; } + +#ifdef CONFIG_USB_DWC3 +static struct dwc3_device dwc3_device_data = { + .maximum_speed = USB_SPEED_SUPER, + .base = 0x12400000, + .dr_mode = USB_DR_MODE_PERIPHERAL, + .index = 0, +}; + +int usb_gadget_handle_interrupts(void) +{ + dwc3_uboot_handle_interrupt(0); + return 0; +} + +int board_usb_init(int index, enum usb_init_type init) +{ + struct exynos_usb3_phy *phy = (struct exynos_usb3_phy *) + samsung_get_base_usb3_phy(); + + if (!phy) { + error("usb3 phy not supported"); + return -ENODEV; + } + + set_usbdrd_phy_ctrl(POWER_USB_DRD_PHY_CTRL_EN); + exynos5_usb3_phy_init(phy); + + return dwc3_uboot_init(&dwc3_device_data); +} +#endif -- cgit v0.10.2 From cac178781ded415b005a9f0e198d14b53d8268cd Mon Sep 17 00:00:00 2001 From: Inha Song Date: Fri, 22 May 2015 18:14:25 +0200 Subject: smdk5420: board: add functions to init dfu environment settings This commit extends SMDK5420 board's file by adding functions: - get_dfu_alt_system() - get_dfu_alt_boot() This allows setting the DFU environment by function set_dfu_alt_info() from: board/samsung/common/misc.c Signed-off-by: Inha Song Cc: Akshay Saraswat Cc: Minkyu Kang diff --git a/board/samsung/smdk5420/smdk5420.c b/board/samsung/smdk5420/smdk5420.c index 8021f77..88f4044 100644 --- a/board/samsung/smdk5420/smdk5420.c +++ b/board/samsung/smdk5420/smdk5420.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -111,3 +112,32 @@ int board_usb_init(int index, enum usb_init_type init) return dwc3_uboot_init(&dwc3_device_data); } #endif +#ifdef CONFIG_SET_DFU_ALT_INFO +char *get_dfu_alt_system(char *interface, char *devstr) +{ + return getenv("dfu_alt_system"); +} + +char *get_dfu_alt_boot(char *interface, char *devstr) +{ + struct mmc *mmc; + char *alt_boot; + int dev_num; + + dev_num = simple_strtoul(devstr, NULL, 10); + + mmc = find_mmc_device(dev_num); + if (!mmc) + return NULL; + + if (mmc_init(mmc)) + return NULL; + + if (IS_SD(mmc)) + alt_boot = CONFIG_DFU_ALT_BOOT_SD; + else + alt_boot = CONFIG_DFU_ALT_BOOT_EMMC; + + return alt_boot; +} +#endif -- cgit v0.10.2 From 075020abbf00bb4c3640524d8986b751a3a51c4a Mon Sep 17 00:00:00 2001 From: Inha Song Date: Fri, 22 May 2015 18:14:26 +0200 Subject: usb: f_mass_storage: sleep_thread: decrease the interval for check ctrlc() This change decreases the interval of calls to: - display busy indicator - check ctrlc() - check cable connection By this change, breaking the UMS command is more easy on Odroid XU3. Signed-off-by: Inha Song Cc: Lukasz Majewski Cc: Marek Vasut diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index d1bc5ef..abe9391 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -671,7 +671,7 @@ static int sleep_thread(struct fsg_common *common) if (common->thread_wakeup_needed) break; - if (++i == 50000) { + if (++i == 20000) { busy_indicator(); i = 0; k++; -- cgit v0.10.2 From 2d4a9b2ce724cd978ed42e8d72d049c54f7e6aff Mon Sep 17 00:00:00 2001 From: Przemyslaw Marczak Date: Fri, 22 May 2015 18:14:27 +0200 Subject: odroid-xu3: config: enable DFU/THOR/UMS by add configs and environment This patch enables all functions required to use DFU/THOR and UMS: - DWC3: core, gadget, Samsung DWC3 PHY - USB gadget: endpoint autoconf, downloader, DFU, THOR, UMS The CONFIG_EXTRA_ENV_SETINGS from exynos5-common.h is redefined and appended by dfu environment setting and some system settings. The boot is still using $distro_boot as previous. Signed-off-by: Inha Song Signed-off-by: Lukasz Majewski Signed-off-by: Joonyoung Shim Signed-off-by: Przemyslaw Marczak Cc: Minkyu Kang diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index c395020..cf17f3d 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -35,8 +35,8 @@ #undef CONFIG_ENV_SIZE #undef CONFIG_ENV_OFFSET -#define CONFIG_ENV_SIZE 4096 -#define CONFIG_ENV_OFFSET (SZ_1K * 1280) /* 1.25 MiB offset */ +#define CONFIG_ENV_SIZE (SZ_1K * 16) +#define CONFIG_ENV_OFFSET (SZ_1K * 3136) /* ~3 MiB offset */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) @@ -46,8 +46,92 @@ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_EXYNOS +/* DWC3 */ +#define CONFIG_USB_DWC3 +#define CONFIG_USB_DWC3_GADGET +#define CONFIG_USB_DWC3_PHY_SAMSUNG + +/* USB gadget */ +#define CONFIG_USB_GADGET +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET_VBUS_DRAW 2 + +/* Downloader */ +#define CONFIG_G_DNL_VENDOR_NUM 0x04E8 +#define CONFIG_G_DNL_PRODUCT_NUM 0x6601 +#define CONFIG_G_DNL_MANUFACTURER "Samsung" +#define CONFIG_USBDOWNLOAD_GADGET + +/* DFU */ +#define CONFIG_DFU_FUNCTION +#define CONFIG_DFU_MMC +#define CONFIG_CMD_DFU +#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M +#define DFU_DEFAULT_POLL_TIMEOUT 300 + +/* THOR */ +#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM +#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D +#define CONFIG_THOR_FUNCTION +#define CONFIG_CMD_THOR_DOWNLOAD + +/* UMS */ +#define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525 +#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 +#define CONFIG_USB_GADGET_MASS_STORAGE +#define CONFIG_CMD_USB_MASS_STORAGE + /* FIXME: MUST BE REMOVED AFTER TMU IS TURNED ON */ #undef CONFIG_EXYNOS_TMU #undef CONFIG_TMU_CMD_DTT +#define CONFIG_DFU_ALT_SYSTEM \ + "uImage fat 0 1;" \ + "zImage fat 0 1;" \ + "Image.itb fat 0 1;" \ + "uInitrd fat 0 1;" \ + "boot.scr fat 0 1;" \ + "boot.cmd fat 0 1;" \ + "exynos5422-odroidxu3.dtb fat 0 1;" \ + "boot part 0 1;" \ + "root part 0 2\0" + +#define CONFIG_DFU_ALT_BOOT_EMMC \ + "u-boot raw 0x3e 0x800 mmcpart 1;" \ + "bl1 raw 0x0 0x1e mmcpart 1;" \ + "bl2 raw 0x1e 0x1d mmcpart 1;" \ + "tzsw raw 0x83e 0x200 mmcpart 1;" \ + "params.bin raw 0x1880 0x20\0" + +#define CONFIG_DFU_ALT_BOOT_SD \ + "u-boot raw 0x3f 0x800;" \ + "bl1 raw 0x1 0x1e;" \ + "bl2 raw 0x1f 0x1d;" \ + "tzsw raw 0x83f 0x200;" \ + "params.bin raw 0x1880 0x20\0" + +/* Enable: board/samsung/common/misc.c to use set_dfu_alt_info() */ +#define CONFIG_MISC_COMMON +#define CONFIG_SET_DFU_ALT_INFO +#define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K) + +/* Define new extra env settings, including DFU settings */ +#undef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + EXYNOS_DEVICE_SETTINGS \ + EXYNOS_FDTFILE_SETTING \ + MEM_LAYOUT_ENV_SETTINGS \ + BOOTENV \ + "bootdelay=0\0" \ + "rootfstype=ext4\0" \ + "console=" CONFIG_DEFAULT_CONSOLE \ + "fdtfile=exynos5422-odroidxu3.dtb\0" \ + "boardname=odroidxu3\0" \ + "mmcbootdev=0\0" \ + "mmcrootdev=0\0" \ + "mmcbootpart=1\0" \ + "mmcrootpart=2\0" \ + "dfu_alt_system="CONFIG_DFU_ALT_SYSTEM \ + "dfu_alt_info=Autoset by THOR/DFU command run.\0" + #endif /* __CONFIG_H */ -- cgit v0.10.2 From 2911bd1858d11308164b0b33de4ea0e8994d3edf Mon Sep 17 00:00:00 2001 From: Przemyslaw Marczak Date: Fri, 22 May 2015 18:14:28 +0200 Subject: samsung: common: add example boot scripts This commit adds example scripts of boot.scr: - bootzimg.cmd - check if dtb exists and boot zImage - autoboot.cmd - check which image exists: Image.itb, zImage or uImage and optionally load fdt file for u/zImage The blank spaces are added to improve readability and can be removed before use mkimage. Required U-Boot environment variables: $boardname, $fdtfile, $console, $mmcbootdev, $mmcbootpart, $mmcrootdev, $mmcrootpart, $rootfstype. Making boot.scr from file.cmd: mkimage -C none -A arm -T script -d file.cmd boot.scr The Odroid XU3 default environment is ready for those boot scripts and the right script can be loaded by DFU. Signed-off-by: Przemyslaw Marczak Cc: Minkyu Kang diff --git a/board/samsung/common/bootscripts/autoboot.cmd b/board/samsung/common/bootscripts/autoboot.cmd new file mode 100644 index 0000000..3b40156 --- /dev/null +++ b/board/samsung/common/bootscripts/autoboot.cmd @@ -0,0 +1,92 @@ +# This is an example file to generate boot.scr - a boot script for U-Boot +# Generate boot.scr: +# ./tools/mkimage -c none -A arm -T script -d autoboot.cmd boot.scr +# +# It requires a list of environment variables to be defined before load: +# platform dependent: boardname, fdtfile, console +# system dependent: mmcbootdev, mmcbootpart, mmcrootdev, mmcrootpart, rootfstype +# +setenv fdtaddr "40800000" +setenv initrdname "uInitrd" +setenv initrdaddr "42000000" +setenv loaddtb "load mmc ${mmcbootdev}:${mmcbootpart} ${fdtaddr} ${fdtfile}" +setenv loadinitrd "load mmc ${mmcbootdev}:${mmcbootpart} ${initrdaddr} ${initrdname}" +setenv loadkernel "load mmc ${mmcbootdev}:${mmcbootpart} '${kerneladdr}' '${kernelname}'" +setenv kernel_args "setenv bootargs ${console} root=/dev/mmcblk${mmcrootdev}p${mmcrootpart} rootfstype=${rootfstype} rootwait ${opts}" + +#### Routine: check_dtb - check that target.dtb exists on boot partition +setenv check_dtb " +if test -e mmc '${mmcbootdev}':'${mmcbootpart}' '${fdtfile}'; then + run loaddtb; + setenv fdt_addr ${fdtaddr}; +else + echo Warning! Booting without DTB: '${fdtfile}'!; + setenv fdt_addr; +fi;" + +#### Routine: check_ramdisk - check that uInitrd exists on boot partition +setenv check_ramdisk " +if test -e mmc '${mmcbootdev}':'${mmcbootpart}' '${initrdname}'; then + echo "Found ramdisk image."; + run loadinitrd; + setenv initrd_addr ${initrdaddr}; +else + echo Warning! Booting without RAMDISK: '${initrdname}'!; + setenv initrd_addr -; +fi;" + +#### Routine: boot_fit - check that env $boardname is set and boot proper config of ITB image +setenv setboot_fit " +if test -e '${boardname}'; then + setenv fdt_addr ; + setenv initrd_addr ; + setenv kerneladdr 0x42000000; + setenv kernelname Image.itb; + setenv itbcfg \#'${boardname}'; + setenv imgbootcmd bootm; +else + echo Warning! Variable: \$boardname is undefined!; +fi" + +#### Routine: setboot_uimg - prepare env to boot uImage +setenv setboot_uimg " + setenv kerneladdr 0x40007FC0; + setenv kernelname uImage; + setenv itbcfg ; + setenv imgbootcmd bootm; + run check_dtb; + run check_ramdisk;" + +#### Routine: setboot_zimg - prepare env to boot zImage +setenv setboot_zimg " + setenv kerneladdr 0x40007FC0; + setenv kernelname zImage; + setenv itbcfg ; + setenv imgbootcmd bootz; + run check_dtb; + run check_ramdisk;" + +#### Routine: boot_img - boot the kernel after env setup +setenv boot_img " + run loadkernel; + run kernel_args; + '${imgbootcmd}' '${kerneladdr}${itbcfg}' '${initrd_addr}' '${fdt_addr}';" + +#### Routine: autoboot - choose proper boot path +setenv autoboot " +if test -e mmc 0:${mmcbootpart} Image.itb; then + echo Found kernel image: Image.itb; + run setboot_fit; + run boot_img; +elif test -e mmc 0:${mmcbootpart} zImage; then + echo Found kernel image: zImage; + run setboot_zimg; + run boot_img; +elif test -e mmc 0:${mmcbootpart} uImage; then + echo Found kernel image: uImage; + run setboot_uimg; + run boot_img; +fi;" + +#### Execute the defined autoboot macro +run autoboot diff --git a/board/samsung/common/bootscripts/bootzimg.cmd b/board/samsung/common/bootscripts/bootzimg.cmd new file mode 100644 index 0000000..2fb4c16 --- /dev/null +++ b/board/samsung/common/bootscripts/bootzimg.cmd @@ -0,0 +1,10 @@ +setenv kernelname zImage; +setenv boot_kernel "setenv bootargs \"${console} root=/dev/mmcblk${mmcrootdev}p${mmcrootpart} rootfstype=${rootfstype} rootwait ${opts}\"; +load mmc ${mmcbootdev}:${mmcbootpart} 0x40007FC0 '${kernelname}'; +if load mmc ${mmcbootdev}:${mmcbootpart} 40800000 ${fdtfile}; then + bootz 0x40007FC0 - 40800000; +else + echo Warning! Booting without DTB: '${fdtfile}'!; + bootz 0x40007FC0 -; +fi;" +run boot_kernel; \ No newline at end of file -- cgit v0.10.2 From 9d01b7872e8fc5faa04e0fc2e33dbea02475d8c7 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 27 May 2015 11:39:22 +0900 Subject: kconfiglib: sync with the latest in Kconfiglib project This commit imports some updates of kconfiglib.py from https://github.com/ulfalizer/Kconfiglib - Warn about and ignore the "allnoconfig_y" Kconfig option - Statements in choices inherit menu/if deps - Add Symbol.is_allnoconfig_y() - Hint that modules are still supported despite warnings. - Add warning related to get_defconfig_filename(). - Fix typo in docs. - Allow digits in $-references to symbols. Signed-off-by: Ulf Magnusson Signed-off-by: Philip Craig Signed-off-by: Jakub Sitnicki Signed-off-by: Masahiro Yamada diff --git a/tools/buildman/kconfiglib.py b/tools/buildman/kconfiglib.py index 655cf44..c662b64 100644 --- a/tools/buildman/kconfiglib.py +++ b/tools/buildman/kconfiglib.py @@ -429,7 +429,15 @@ class Config(): If the environment variable 'srctree' was set when the Config was created, get_defconfig_filename() will first look relative to that directory before looking in the current directory; see - Config.__init__().""" + Config.__init__(). + + WARNING: A wart here is that scripts/kconfig/Makefile sometimes uses the + --defconfig= option when calling the C implementation of e.g. + 'make defconfig'. This option overrides the 'option defconfig_list' + symbol, meaning the result from get_defconfig_filename() might not + match what 'make defconfig' would use. That probably ought to be worked + around somehow, so that this function always gives the "expected" + result.""" if self.defconfig_sym is None: return None @@ -506,7 +514,7 @@ class Config(): For example, if FOO and BAR are tristate symbols at least one of which has the value "y", then config.eval("y && (FOO || BAR)") => "y" - This functions always yields a tristate value. To get the value of + This function always yields a tristate value. To get the value of non-bool, non-tristate symbols, use Symbol.get_value(). The result of this function is consistent with how evaluation works for @@ -1066,7 +1074,7 @@ class Config(): choice.block = self._parse_block(line_feeder, T_ENDCHOICE, choice, - None, + deps, visible_if_deps) choice._determine_actual_symbols() @@ -1326,10 +1334,21 @@ error, and you should e-mail kconfiglib@gmail.com. elif tokens.check(T_MODULES): self._warn("the 'modules' option is not supported. " "Let me know if this is a problem for you; " - "it shouldn't be that hard to implement.", + "it shouldn't be that hard to implement. " + "(Note that modules are still supported -- " + "Kconfiglib just assumes the symbol name " + "MODULES.)", filename, linenr) + elif tokens.check(T_ALLNOCONFIG_Y): + if not isinstance(stmt, Symbol): + _parse_error(line, + "the 'allnoconfig_y' option is only valid for symbols.", + filename, + linenr) + stmt.allnoconfig_y = True + else: _parse_error(line, "unrecognized option.", filename, linenr) @@ -2023,8 +2042,8 @@ def _make_and(e1, e2): T_OPTIONAL, T_PROMPT, T_DEFAULT, T_BOOL, T_TRISTATE, T_HEX, T_INT, T_STRING, T_DEF_BOOL, T_DEF_TRISTATE, - T_SELECT, T_RANGE, T_OPTION, T_ENV, - T_DEFCONFIG_LIST, T_MODULES, T_VISIBLE) = range(0, 38) + T_SELECT, T_RANGE, T_OPTION, T_ALLNOCONFIG_Y, T_ENV, + T_DEFCONFIG_LIST, T_MODULES, T_VISIBLE) = range(0, 39) # Keyword to token map keywords = { @@ -2056,6 +2075,7 @@ keywords = { "select" : T_SELECT, "range" : T_RANGE, "option" : T_OPTION, + "allnoconfig_y" : T_ALLNOCONFIG_Y, "env" : T_ENV, "defconfig_list" : T_DEFCONFIG_LIST, "modules" : T_MODULES, @@ -2080,7 +2100,7 @@ set_re = re.compile(r"CONFIG_(\w+)=(.*)") unset_re = re.compile(r"# CONFIG_(\w+) is not set") # Regular expression for finding $-references to symbols in strings -sym_ref_re = re.compile(r"\$[A-Za-z_]+") +sym_ref_re = re.compile(r"\$[A-Za-z0-9_]+") # Integers representing symbol types UNKNOWN, BOOL, TRISTATE, STRING, HEX, INT = range(0, 6) @@ -2765,6 +2785,11 @@ class Symbol(Item, _HasVisibility): and sym.get_parent().get_selection() is sym'.""" return self.is_choice_symbol_ and self.parent.get_selection() is self + def is_allnoconfig_y(self): + """Returns True if the symbol has the 'allnoconfig_y' option set; + otherwise, returns False.""" + return self.allnoconfig_y + def __str__(self): """Returns a string containing various information about the symbol.""" return self.config._get_sym_or_choice_str(self) @@ -2862,6 +2887,9 @@ class Symbol(Item, _HasVisibility): # Does the symbol get its value from the environment? self.is_from_env = False + # Does the symbol have the 'allnoconfig_y' option set? + self.allnoconfig_y = False + def _invalidate(self): if self.is_special_: return -- cgit v0.10.2 From 6213db78f4820816fc52c807dfab47bb3266c809 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Wed, 3 Jun 2015 14:43:21 +0530 Subject: ARM: DRA7: DDR3: Add support for HW leveling DRA7 EMIF supports Full leveling for DDR3. Adding support for the Full leveling sequence. Signed-off-by: Lokesh Vutla Reviewed-by: Tom Rini diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c index c01a98f..3ee4695 100644 --- a/arch/arm/cpu/armv7/omap-common/emif-common.c +++ b/arch/arm/cpu/armv7/omap-common/emif-common.c @@ -242,13 +242,122 @@ static void omap5_ddr3_leveling(u32 base, const struct emif_regs *regs) __udelay(130); } -static void ddr3_leveling(u32 base, const struct emif_regs *regs) +static void update_hwleveling_output(u32 base, const struct emif_regs *regs) { - if (is_omap54xx()) - omap5_ddr3_leveling(base, regs); + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + u32 *emif_ext_phy_ctrl_reg, *emif_phy_status; + u32 reg, i; + + emif_phy_status = (u32 *)&emif->emif_ddr_phy_status[7]; + + /* Update PHY_REG_RDDQS_RATIO */ + emif_ext_phy_ctrl_reg = (u32 *)&emif->emif_ddr_ext_phy_ctrl_7; + for (i = 0; i < PHY_RDDQS_RATIO_REGS; i++) { + reg = readl(emif_phy_status++); + writel(reg, emif_ext_phy_ctrl_reg++); + writel(reg, emif_ext_phy_ctrl_reg++); + } + + /* Update PHY_REG_FIFO_WE_SLAVE_RATIO */ + emif_ext_phy_ctrl_reg = (u32 *)&emif->emif_ddr_ext_phy_ctrl_2; + for (i = 0; i < PHY_FIFO_WE_SLAVE_RATIO_REGS; i++) { + reg = readl(emif_phy_status++); + writel(reg, emif_ext_phy_ctrl_reg++); + writel(reg, emif_ext_phy_ctrl_reg++); + } + + /* Update PHY_REG_WR_DQ/DQS_SLAVE_RATIO */ + emif_ext_phy_ctrl_reg = (u32 *)&emif->emif_ddr_ext_phy_ctrl_12; + for (i = 0; i < PHY_REG_WR_DQ_SLAVE_RATIO_REGS; i++) { + reg = readl(emif_phy_status++); + writel(reg, emif_ext_phy_ctrl_reg++); + writel(reg, emif_ext_phy_ctrl_reg++); + } + + /* Disable Leveling */ + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1); + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw); + writel(0x0, &emif->emif_rd_wr_lvl_rmp_ctl); } -static void ddr3_init(u32 base, const struct emif_regs *regs) +static void dra7_ddr3_leveling(u32 base, const struct emif_regs *regs) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + /* Clear Error Status */ + clrsetbits_le32(&emif->emif_ddr_ext_phy_ctrl_36, + EMIF_REG_PHY_FIFO_WE_IN_MISALINED_CLR, + EMIF_REG_PHY_FIFO_WE_IN_MISALINED_CLR); + + clrsetbits_le32(&emif->emif_ddr_ext_phy_ctrl_36_shdw, + EMIF_REG_PHY_FIFO_WE_IN_MISALINED_CLR, + EMIF_REG_PHY_FIFO_WE_IN_MISALINED_CLR); + + /* Disable refreshed before leveling */ + clrsetbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_SHIFT, + EMIF_REG_INITREF_DIS_SHIFT); + + /* Start Full leveling */ + writel(DDR3_FULL_LVL, &emif->emif_rd_wr_lvl_ctl); + + __udelay(300); + + /* Check for leveling timeout */ + if (readl(&emif->emif_status) & EMIF_REG_LEVELING_TO_MASK) { + printf("Leveling timeout on EMIF%d\n", emif_num(base)); + return; + } + + /* Enable refreshes after leveling */ + clrbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_SHIFT); + + debug("HW leveling success\n"); + /* + * Update slave ratios in EXT_PHY_CTRLx registers + * as per HW leveling output + */ + update_hwleveling_output(base, regs); +} + +static void dra7_ddr3_init(u32 base, const struct emif_regs *regs) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + if (warm_reset()) + emif_reset_phy(base); + do_ext_phy_settings(base, regs); + + writel(regs->ref_ctrl | EMIF_REG_INITREF_DIS_MASK, + &emif->emif_sdram_ref_ctrl); + /* Update timing registers */ + writel(regs->sdram_tim1, &emif->emif_sdram_tim_1); + writel(regs->sdram_tim2, &emif->emif_sdram_tim_2); + writel(regs->sdram_tim3, &emif->emif_sdram_tim_3); + + writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0, &emif->emif_l3_config); + writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl); + writel(regs->zq_config, &emif->emif_zq_config); + writel(regs->temp_alert_config, &emif->emif_temp_alert_config); + writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl); + writel(regs->emif_rd_wr_lvl_ctl, &emif->emif_rd_wr_lvl_ctl); + + writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1); + writel(regs->emif_rd_wr_exec_thresh, &emif->emif_rd_wr_exec_thresh); + + writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl); + + writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config); + writel(regs->sdram_config_init, &emif->emif_sdram_config); + + __udelay(1000); + + writel(regs->ref_ctrl_final, &emif->emif_sdram_ref_ctrl); + + if (regs->emif_rd_wr_lvl_rmp_ctl & EMIF_REG_RDWRLVL_EN_MASK) + dra7_ddr3_leveling(base, regs); +} + +static void omap5_ddr3_init(u32 base, const struct emif_regs *regs) { struct emif_reg_struct *emif = (struct emif_reg_struct *)base; @@ -269,25 +378,20 @@ static void ddr3_init(u32 base, const struct emif_regs *regs) writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl); - /* - * The same sequence should work on OMAP5432 as well. But strange that - * it is not working - */ - if (is_dra7xx()) { - do_ext_phy_settings(base, regs); - writel(regs->ref_ctrl_final, &emif->emif_sdram_ref_ctrl); - writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config); - writel(regs->sdram_config_init, &emif->emif_sdram_config); - } else { - writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config); - writel(regs->sdram_config_init, &emif->emif_sdram_config); - do_ext_phy_settings(base, regs); - } + writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config); + writel(regs->sdram_config_init, &emif->emif_sdram_config); + do_ext_phy_settings(base, regs); - /* enable leveling */ writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl); + omap5_ddr3_leveling(base, regs); +} - ddr3_leveling(base, regs); +static void ddr3_init(u32 base, const struct emif_regs *regs) +{ + if (is_omap54xx()) + omap5_ddr3_init(base, regs); + else + dra7_ddr3_init(base, regs); } #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS @@ -1075,7 +1179,7 @@ static void do_sdram_init(u32 base) if (warm_reset() && (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3)) { set_lpmode_selfrefresh(base); emif_reset_phy(base); - ddr3_leveling(base, regs); + omap5_ddr3_leveling(base, regs); } /* Write to the shadow registers */ diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c index 5f8daa1..2e23852 100644 --- a/arch/arm/cpu/armv7/omap5/sdram.c +++ b/arch/arm/cpu/armv7/omap5/sdram.c @@ -421,8 +421,14 @@ const u32 ddr3_ext_phy_ctrl_const_base_es2[] = { 0x0 }; +/* Ext phy ctrl 1-35 regs */ const u32 dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[] = { + 0x10040100, + 0x00910091, + 0x00950095, + 0x009B009B, + 0x009E009E, 0x00980098, 0x00340034, 0x00350035, @@ -441,7 +447,7 @@ dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[] = { 0x00500050, 0x00000000, 0x00600020, - 0x40010080, + 0x40011080, 0x08102040, 0x0, 0x0, @@ -450,8 +456,14 @@ dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[] = { 0x0 }; +/* Ext phy ctrl 1-35 regs */ const u32 dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[] = { + 0x10040100, + 0x00910091, + 0x00950095, + 0x009B009B, + 0x009E009E, 0x00980098, 0x00330033, 0x00330033, @@ -470,7 +482,7 @@ dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[] = { 0x00500050, 0x00000000, 0x00600020, - 0x40010080, + 0x40011080, 0x08102040, 0x0, 0x0, @@ -479,8 +491,14 @@ dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[] = { 0x0 }; +/* Ext phy ctrl 1-35 regs */ const u32 dra_ddr3_ext_phy_ctrl_const_base_666MHz[] = { + 0x10040100, + 0x00A400A4, + 0x00A900A9, + 0x00B000B0, + 0x00B000B0, 0x00A400A4, 0x00390039, 0x00320032, @@ -562,7 +580,7 @@ void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs) *regs = &mr_regs; } -void do_ext_phy_settings(u32 base, const struct emif_regs *regs) +static void do_ext_phy_settings_omap5(u32 base, const struct emif_regs *regs) { u32 *ext_phy_ctrl_base = 0; u32 *emif_ext_phy_ctrl_base = 0; @@ -601,6 +619,58 @@ void do_ext_phy_settings(u32 base, const struct emif_regs *regs) } } +static void do_ext_phy_settings_dra7(u32 base, const struct emif_regs *regs) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + u32 *emif_ext_phy_ctrl_base = 0; + u32 emif_nr; + const u32 *ext_phy_ctrl_const_regs; + u32 i, hw_leveling, size; + + emif_nr = (base == EMIF1_BASE) ? 1 : 2; + + hw_leveling = regs->emif_rd_wr_lvl_rmp_ctl >> EMIF_REG_RDWRLVL_EN_SHIFT; + + emif_ext_phy_ctrl_base = (u32 *)&(emif->emif_ddr_ext_phy_ctrl_1); + + emif_get_ext_phy_ctrl_const_regs(emif_nr, + &ext_phy_ctrl_const_regs, &size); + + writel(ext_phy_ctrl_const_regs[0], &emif_ext_phy_ctrl_base[0]); + writel(ext_phy_ctrl_const_regs[0], &emif_ext_phy_ctrl_base[1]); + + if (!hw_leveling) { + /* + * Copy the predefined PHY register values + * in case of sw leveling + */ + for (i = 1; i < 25; i++) { + writel(ext_phy_ctrl_const_regs[i], + &emif_ext_phy_ctrl_base[i * 2]); + writel(ext_phy_ctrl_const_regs[i], + &emif_ext_phy_ctrl_base[i * 2 + 1]); + } + } else { + /* + * Write the init value for HW levling to occur + */ + for (i = 21; i < 35; i++) { + writel(ext_phy_ctrl_const_regs[i], + &emif_ext_phy_ctrl_base[i * 2]); + writel(ext_phy_ctrl_const_regs[i], + &emif_ext_phy_ctrl_base[i * 2 + 1]); + } + } +} + +void do_ext_phy_settings(u32 base, const struct emif_regs *regs) +{ + if (is_omap54xx()) + do_ext_phy_settings_omap5(base, regs); + else + do_ext_phy_settings_dra7(base, regs); +} + #ifndef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS static const struct lpddr2_ac_timings timings_jedec_532_mhz = { .max_freq = 532000000, diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h index 7a545ea..a97d2fd 100644 --- a/arch/arm/include/asm/emif.h +++ b/arch/arm/include/asm/emif.h @@ -44,6 +44,8 @@ #define EMIF_REG_DUAL_CLK_MODE_MASK (1 << 30) #define EMIF_REG_FAST_INIT_SHIFT 29 #define EMIF_REG_FAST_INIT_MASK (1 << 29) +#define EMIF_REG_LEVLING_TO_SHIFT 4 +#define EMIF_REG_LEVELING_TO_MASK (7 << 4) #define EMIF_REG_PHY_DLL_READY_SHIFT 2 #define EMIF_REG_PHY_DLL_READY_MASK (1 << 2) @@ -509,6 +511,13 @@ #define EMIF_REG_RDWRLVLINC_RMP_WIN_SHIFT 0 #define EMIF_REG_RDWRLVLINC_RMP_WIN_MASK (0x1FFF << 0) +/* EMIF_PHY_CTRL_36 */ +#define EMIF_REG_PHY_FIFO_WE_IN_MISALINED_CLR (1 << 8) + +#define PHY_RDDQS_RATIO_REGS 5 +#define PHY_FIFO_WE_SLAVE_RATIO_REGS 5 +#define PHY_REG_WR_DQ_SLAVE_RATIO_REGS 10 + /*Leveling Fields */ #define DDR3_WR_LVL_INT 0x73 #define DDR3_RD_LVL_INT 0x33 diff --git a/board/ti/beagle_x15/board.c b/board/ti/beagle_x15/board.c index ffcd531..b32d090 100644 --- a/board/ti/beagle_x15/board.c +++ b/board/ti/beagle_x15/board.c @@ -68,7 +68,13 @@ static const struct emif_regs beagle_x15_emif1_ddr3_532mhz_emif_regs = { .emif_rd_wr_exec_thresh = 0x00000305 }; +/* Ext phy ctrl regs 1-35 */ static const u32 beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs[] = { + 0x10040100, + 0x00740074, + 0x00780078, + 0x007c007c, + 0x007b007b, 0x00800080, 0x00360036, 0x00340034, @@ -90,7 +96,7 @@ static const u32 beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs[] = { 0x00000000, 0x00600020, - 0x40010080, + 0x40011080, 0x08102040, 0x00400040, @@ -126,6 +132,11 @@ static const struct emif_regs beagle_x15_emif2_ddr3_532mhz_emif_regs = { }; static const u32 beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs[] = { + 0x10040100, + 0x00820082, + 0x008b008b, + 0x00800080, + 0x007e007e, 0x00800080, 0x00370037, 0x00390039, @@ -145,7 +156,7 @@ static const u32 beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs[] = { 0x00000000, 0x00600020, - 0x40010080, + 0x40011080, 0x08102040, 0x00400040, -- cgit v0.10.2 From 496edffdb291283b2a45975eb01462f998044079 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Wed, 3 Jun 2015 14:43:22 +0530 Subject: ARM: BeagleBoard-X15: Enable HW leveling Updating EMIF registers to enable HW leveling on BeagleBoard-X15. Signed-off-by: Lokesh Vutla Reviewed-by: Tom Rini diff --git a/board/ti/beagle_x15/board.c b/board/ti/beagle_x15/board.c index b32d090..124a1d3 100644 --- a/board/ti/beagle_x15/board.c +++ b/board/ti/beagle_x15/board.c @@ -55,15 +55,15 @@ static const struct emif_regs beagle_x15_emif1_ddr3_532mhz_emif_regs = { .read_idle_ctrl = 0x00050001, .zq_config = 0x0007190b, .temp_alert_config = 0x00000000, - .emif_ddr_phy_ctlr_1_init = 0x0e24400a, - .emif_ddr_phy_ctlr_1 = 0x0e24400a, + .emif_ddr_phy_ctlr_1_init = 0x0024400b, + .emif_ddr_phy_ctlr_1 = 0x0e24400b, .emif_ddr_ext_phy_ctrl_1 = 0x10040100, .emif_ddr_ext_phy_ctrl_2 = 0x00740074, .emif_ddr_ext_phy_ctrl_3 = 0x00780078, .emif_ddr_ext_phy_ctrl_4 = 0x007c007c, .emif_ddr_ext_phy_ctrl_5 = 0x007b007b, .emif_rd_wr_lvl_rmp_win = 0x00000000, - .emif_rd_wr_lvl_rmp_ctl = 0x00000000, + .emif_rd_wr_lvl_rmp_ctl = 0x80000000, .emif_rd_wr_lvl_ctl = 0x00000000, .emif_rd_wr_exec_thresh = 0x00000305 }; @@ -103,7 +103,12 @@ static const u32 beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs[] = { 0x00400040, 0x00400040, 0x00400040, - 0x00400040 + 0x00400040, + 0x0, + 0x0, + 0x0, + 0x0, + 0x0 }; static const struct emif_regs beagle_x15_emif2_ddr3_532mhz_emif_regs = { @@ -118,15 +123,15 @@ static const struct emif_regs beagle_x15_emif2_ddr3_532mhz_emif_regs = { .read_idle_ctrl = 0x00050001, .zq_config = 0x0007190b, .temp_alert_config = 0x00000000, - .emif_ddr_phy_ctlr_1_init = 0x0e24400a, - .emif_ddr_phy_ctlr_1 = 0x0e24400a, + .emif_ddr_phy_ctlr_1_init = 0x0024400b, + .emif_ddr_phy_ctlr_1 = 0x0e24400b, .emif_ddr_ext_phy_ctrl_1 = 0x10040100, .emif_ddr_ext_phy_ctrl_2 = 0x00820082, .emif_ddr_ext_phy_ctrl_3 = 0x008b008b, .emif_ddr_ext_phy_ctrl_4 = 0x00800080, .emif_ddr_ext_phy_ctrl_5 = 0x007e007e, .emif_rd_wr_lvl_rmp_win = 0x00000000, - .emif_rd_wr_lvl_rmp_ctl = 0x00000000, + .emif_rd_wr_lvl_rmp_ctl = 0x80000000, .emif_rd_wr_lvl_ctl = 0x00000000, .emif_rd_wr_exec_thresh = 0x00000305 }; @@ -163,7 +168,12 @@ static const u32 beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs[] = { 0x00400040, 0x00400040, 0x00400040, - 0x00400040 + 0x00400040, + 0x0, + 0x0, + 0x0, + 0x0, + 0x0 }; void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs) -- cgit v0.10.2 From 920638fa5e781de91bb70fb516219c8cd4136407 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Wed, 3 Jun 2015 14:43:23 +0530 Subject: ARM: DRA7-evm: Enable HW leveling Updating EMIF registers to enable HW leveling on DRA7-evm. Signed-off-by: Lokesh Vutla Reviewed-by: Tom Rini diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c index 2e23852..942a80a 100644 --- a/arch/arm/cpu/armv7/omap5/sdram.c +++ b/arch/arm/cpu/armv7/omap5/sdram.c @@ -149,15 +149,15 @@ const struct emif_regs emif_1_regs_ddr3_532_mhz_1cs_dra_es1 = { .read_idle_ctrl = 0x00050001, .zq_config = 0x0007190B, .temp_alert_config = 0x00000000, - .emif_ddr_phy_ctlr_1_init = 0x0E24400A, - .emif_ddr_phy_ctlr_1 = 0x0E24400A, + .emif_ddr_phy_ctlr_1_init = 0x0024400B, + .emif_ddr_phy_ctlr_1 = 0x0E24400B, .emif_ddr_ext_phy_ctrl_1 = 0x10040100, .emif_ddr_ext_phy_ctrl_2 = 0x00910091, .emif_ddr_ext_phy_ctrl_3 = 0x00950095, .emif_ddr_ext_phy_ctrl_4 = 0x009B009B, .emif_ddr_ext_phy_ctrl_5 = 0x009E009E, .emif_rd_wr_lvl_rmp_win = 0x00000000, - .emif_rd_wr_lvl_rmp_ctl = 0x00000000, + .emif_rd_wr_lvl_rmp_ctl = 0x80000000, .emif_rd_wr_lvl_ctl = 0x00000000, .emif_rd_wr_exec_thresh = 0x00000305 }; @@ -174,15 +174,15 @@ const struct emif_regs emif_2_regs_ddr3_532_mhz_1cs_dra_es1 = { .read_idle_ctrl = 0x00050001, .zq_config = 0x0007190B, .temp_alert_config = 0x00000000, - .emif_ddr_phy_ctlr_1_init = 0x0E24400A, - .emif_ddr_phy_ctlr_1 = 0x0E24400A, + .emif_ddr_phy_ctlr_1_init = 0x0024400B, + .emif_ddr_phy_ctlr_1 = 0x0E24400B, .emif_ddr_ext_phy_ctrl_1 = 0x10040100, .emif_ddr_ext_phy_ctrl_2 = 0x00910091, .emif_ddr_ext_phy_ctrl_3 = 0x00950095, .emif_ddr_ext_phy_ctrl_4 = 0x009B009B, .emif_ddr_ext_phy_ctrl_5 = 0x009E009E, .emif_rd_wr_lvl_rmp_win = 0x00000000, - .emif_rd_wr_lvl_rmp_ctl = 0x00000000, + .emif_rd_wr_lvl_rmp_ctl = 0x80000000, .emif_rd_wr_lvl_ctl = 0x00000000, .emif_rd_wr_exec_thresh = 0x00000305 }; @@ -453,6 +453,11 @@ dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[] = { 0x0, 0x0, 0x0, + 0x0, + 0x0, + 0x0, + 0x0, + 0x0, 0x0 }; @@ -488,6 +493,11 @@ dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[] = { 0x0, 0x0, 0x0, + 0x0, + 0x0, + 0x0, + 0x0, + 0x0, 0x0 }; -- cgit v0.10.2 From f308b4fce5d0c8a9ebae1e369d4b188f9432f79c Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Wed, 3 Jun 2015 14:43:24 +0530 Subject: ARM: DRA72-evm: Enable HW leveling Updating EMIF registers to enable HW leveling on DRA72-evm. Also updating the timing registers. Signed-off-by: Lokesh Vutla Reviewed-by: Tom Rini diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c index 942a80a..3022b9e 100644 --- a/arch/arm/cpu/armv7/omap5/sdram.c +++ b/arch/arm/cpu/armv7/omap5/sdram.c @@ -191,15 +191,15 @@ const struct emif_regs emif_1_regs_ddr3_666_mhz_1cs_dra_es1 = { .sdram_config_init = 0x61862B32, .sdram_config = 0x61862B32, .sdram_config2 = 0x08000000, - .ref_ctrl = 0x0000493E, + .ref_ctrl = 0x0000514C, .ref_ctrl_final = 0x0000144A, .sdram_tim1 = 0xD113781C, - .sdram_tim2 = 0x308F7FE3, - .sdram_tim3 = 0x009F86A8, + .sdram_tim2 = 0x305A7FDA, + .sdram_tim3 = 0x409F86A8, .read_idle_ctrl = 0x00050000, - .zq_config = 0x0007190B, + .zq_config = 0x5007190B, .temp_alert_config = 0x00000000, - .emif_ddr_phy_ctlr_1_init = 0x0E24400D, + .emif_ddr_phy_ctlr_1_init = 0x0024400D, .emif_ddr_phy_ctlr_1 = 0x0E24400D, .emif_ddr_ext_phy_ctrl_1 = 0x10040100, .emif_ddr_ext_phy_ctrl_2 = 0x00A400A4, @@ -207,7 +207,7 @@ const struct emif_regs emif_1_regs_ddr3_666_mhz_1cs_dra_es1 = { .emif_ddr_ext_phy_ctrl_4 = 0x00B000B0, .emif_ddr_ext_phy_ctrl_5 = 0x00B000B0, .emif_rd_wr_lvl_rmp_win = 0x00000000, - .emif_rd_wr_lvl_rmp_ctl = 0x00000000, + .emif_rd_wr_lvl_rmp_ctl = 0x80000000, .emif_rd_wr_lvl_ctl = 0x00000000, .emif_rd_wr_exec_thresh = 0x00000305 }; @@ -533,6 +533,11 @@ dra_ddr3_ext_phy_ctrl_const_base_666MHz[] = { 0x0, 0x0, 0x0, + 0x0, + 0x0, + 0x0, + 0x0, + 0x0, 0x0 }; -- cgit v0.10.2 From c7400e4882d8bf5c48f7d9ecc243987368dac2ba Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Wed, 3 Jun 2015 14:43:25 +0530 Subject: ARM: DRA7: Add is_dra72x cpu check definition A generic is_dra72x cpu check is useful for grouping all the revisions under that. This is used in the subsequent patches. Signed-off-by: Lokesh Vutla Reviewed-by: Tom Rini diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index b0296fb..50f178b 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -622,12 +622,19 @@ static inline u8 is_omap54xx(void) } #define DRA7XX 0x07000000 +#define DRA72X 0x07200000 static inline u8 is_dra7xx(void) { extern u32 *const omap_si_rev; return ((*omap_si_rev & 0xFF000000) == DRA7XX); } + +static inline u8 is_dra72x(void) +{ + extern u32 *const omap_si_rev; + return (*omap_si_rev & 0xFFF00000) == DRA72X; +} #endif /* -- cgit v0.10.2 From a5c5c5b500bd7cee5f5d260c538429fe1bcc0ae1 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Wed, 3 Jun 2015 14:43:26 +0530 Subject: ARM: DRA7: Update DDR IO configuration DDRIO_2 and LPDDR2CH1_1 registers are not present for DRA7. So not configuring these registers for DRA7xx Signed-off-by: Lokesh Vutla Reviewed-by: Tom Rini diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c index 8d6b59e..03c2b97 100644 --- a/arch/arm/cpu/armv7/omap5/hwinit.c +++ b/arch/arm/cpu/armv7/omap5/hwinit.c @@ -75,16 +75,20 @@ static void io_settings_ddr3(void) writel(ioregs->ctrl_ddrio_0, (*ctrl)->control_ddrio_0); writel(ioregs->ctrl_ddrio_1, (*ctrl)->control_ddrio_1); - writel(ioregs->ctrl_ddrio_2, (*ctrl)->control_ddrio_2); + + if (!is_dra7xx()) { + writel(ioregs->ctrl_ddrio_2, (*ctrl)->control_ddrio_2); + writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_1); + } /* omap5432 does not use lpddr2 */ writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_0); - writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_1); writel(ioregs->ctrl_emif_sdram_config_ext, (*ctrl)->control_emif1_sdram_config_ext); - writel(ioregs->ctrl_emif_sdram_config_ext, - (*ctrl)->control_emif2_sdram_config_ext); + if (!is_dra72x()) + writel(ioregs->ctrl_emif_sdram_config_ext, + (*ctrl)->control_emif2_sdram_config_ext); if (is_omap54xx()) { /* Disable DLL select */ -- cgit v0.10.2 From 536d87470869c4c3257d70f387146703a2dee7c5 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Wed, 3 Jun 2015 14:43:27 +0530 Subject: ARM: DRA7: Update DDR IO registers Update DDR IO register values. Signed-off-by: Lokesh Vutla Reviewed-by: Tom Rini diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c index 868415d..bfdf1e0 100644 --- a/arch/arm/cpu/armv7/omap5/hw_data.c +++ b/arch/arm/cpu/armv7/omap5/hw_data.c @@ -592,11 +592,11 @@ const struct ctrl_ioregs ioregs_dra7xx_es1 = { .ctrl_ddrch = 0x40404040, .ctrl_lpddr2ch = 0x40404040, .ctrl_ddr3ch = 0x80808080, - .ctrl_ddrio_0 = 0xA2084210, - .ctrl_ddrio_1 = 0x84210840, + .ctrl_ddrio_0 = 0x00094A40, + .ctrl_ddrio_1 = 0x04A52000, .ctrl_ddrio_2 = 0x84210000, - .ctrl_emif_sdram_config_ext = 0x0001C1A7, - .ctrl_emif_sdram_config_ext_final = 0x0001C1A7, + .ctrl_emif_sdram_config_ext = 0x0001C127, + .ctrl_emif_sdram_config_ext_final = 0x0001C127, .ctrl_ddr_ctrl_ext_0 = 0xA2000000, }; @@ -604,11 +604,11 @@ const struct ctrl_ioregs ioregs_dra72x_es1 = { .ctrl_ddrch = 0x40404040, .ctrl_lpddr2ch = 0x40404040, .ctrl_ddr3ch = 0x60606080, - .ctrl_ddrio_0 = 0xA2084210, - .ctrl_ddrio_1 = 0x84210840, + .ctrl_ddrio_0 = 0x00094A40, + .ctrl_ddrio_1 = 0x04A52000, .ctrl_ddrio_2 = 0x84210000, - .ctrl_emif_sdram_config_ext = 0x0001C1A7, - .ctrl_emif_sdram_config_ext_final = 0x0001C1A7, + .ctrl_emif_sdram_config_ext = 0x0001C127, + .ctrl_emif_sdram_config_ext_final = 0x0001C127, .ctrl_ddr_ctrl_ext_0 = 0xA2000000, }; -- cgit v0.10.2 From ee4dc2590f00d0109bcdb282ad86fd3dce567e50 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Wed, 3 Jun 2015 16:57:47 +0530 Subject: ARM: DRA7xx: EMIF: Fix DLL_CALIB_CTRL register When DLL_CALIB_INTERVAL is set, an extra delay is added which is not required and it consumes EMIF bandwidth. So making the DLL_CALIB_CTRL[8:0]DLL_CALIB_INTERVAL bits to 0. Signed-off-by: Lokesh Vutla diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c index 3022b9e..cf4452d 100644 --- a/arch/arm/cpu/armv7/omap5/sdram.c +++ b/arch/arm/cpu/armv7/omap5/sdram.c @@ -146,7 +146,7 @@ const struct emif_regs emif_1_regs_ddr3_532_mhz_1cs_dra_es1 = { .sdram_tim1 = 0xCCCF36B3, .sdram_tim2 = 0x308F7FDA, .sdram_tim3 = 0x027F88A8, - .read_idle_ctrl = 0x00050001, + .read_idle_ctrl = 0x00050000, .zq_config = 0x0007190B, .temp_alert_config = 0x00000000, .emif_ddr_phy_ctlr_1_init = 0x0024400B, @@ -171,7 +171,7 @@ const struct emif_regs emif_2_regs_ddr3_532_mhz_1cs_dra_es1 = { .sdram_tim1 = 0xCCCF36B3, .sdram_tim2 = 0x308F7FDA, .sdram_tim3 = 0x027F88A8, - .read_idle_ctrl = 0x00050001, + .read_idle_ctrl = 0x00050000, .zq_config = 0x0007190B, .temp_alert_config = 0x00000000, .emif_ddr_phy_ctlr_1_init = 0x0024400B, diff --git a/board/ti/beagle_x15/board.c b/board/ti/beagle_x15/board.c index 124a1d3..f25e75e 100644 --- a/board/ti/beagle_x15/board.c +++ b/board/ti/beagle_x15/board.c @@ -52,7 +52,7 @@ static const struct emif_regs beagle_x15_emif1_ddr3_532mhz_emif_regs = { .sdram_tim1 = 0xceef266b, .sdram_tim2 = 0x328f7fda, .sdram_tim3 = 0x027f88a8, - .read_idle_ctrl = 0x00050001, + .read_idle_ctrl = 0x00050000, .zq_config = 0x0007190b, .temp_alert_config = 0x00000000, .emif_ddr_phy_ctlr_1_init = 0x0024400b, @@ -120,7 +120,7 @@ static const struct emif_regs beagle_x15_emif2_ddr3_532mhz_emif_regs = { .sdram_tim1 = 0xceef266b, .sdram_tim2 = 0x328f7fda, .sdram_tim3 = 0x027f88a8, - .read_idle_ctrl = 0x00050001, + .read_idle_ctrl = 0x00050000, .zq_config = 0x0007190b, .temp_alert_config = 0x00000000, .emif_ddr_phy_ctlr_1_init = 0x0024400b, -- cgit v0.10.2 From 1f68451ca0d3a5faca49f44cc24cd3b7420bacb8 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Thu, 4 Jun 2015 16:42:33 +0530 Subject: ARM: DRA7: Make do_set_mux32() generic do_set_mux32() is redefined in dra7xx and beagle_x15 boards. IO delay recalibration sequence also needs this. Making it generic to avoid duplication. Signed-off-by: Lokesh Vutla Signed-off-by: Nishanth Menon diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c index 03c2b97..222540f 100644 --- a/arch/arm/cpu/armv7/omap5/hwinit.c +++ b/arch/arm/cpu/armv7/omap5/hwinit.c @@ -40,6 +40,15 @@ static struct gpio_bank gpio_bank_54xx[8] = { const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx; +void do_set_mux32(u32 base, struct pad_conf_entry const *array, int size) +{ + int i; + struct pad_conf_entry *pad = (struct pad_conf_entry *)array; + + for (i = 0; i < size; i++, pad++) + writel(pad->val, base + pad->offset); +} + #ifdef CONFIG_SPL_BUILD /* LPDDR2 specific IO settings */ static void io_settings_lpddr2(void) diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h index ea84665..b41bf15 100644 --- a/arch/arm/include/asm/arch-omap5/sys_proto.h +++ b/arch/arm/include/asm/arch-omap5/sys_proto.h @@ -32,6 +32,7 @@ void gpmc_init(void); void watchdog_init(void); u32 get_device_type(void); void do_set_mux(u32 base, struct pad_conf_entry const *array, int size); +void do_set_mux32(u32 base, struct pad_conf_entry const *array, int size); void set_muxconf_regs_essential(void); u32 wait_on_value(u32, u32, void *, u32); void sdelay(unsigned long); diff --git a/board/ti/beagle_x15/board.c b/board/ti/beagle_x15/board.c index f25e75e..4ee02f2 100644 --- a/board/ti/beagle_x15/board.c +++ b/board/ti/beagle_x15/board.c @@ -261,16 +261,6 @@ int board_late_init(void) return 0; } -static void do_set_mux32(u32 base, - struct pad_conf_entry const *array, int size) -{ - int i; - struct pad_conf_entry *pad = (struct pad_conf_entry *)array; - - for (i = 0; i < size; i++, pad++) - writel(pad->val, base + pad->offset); -} - void set_muxconf_regs_essential(void) { do_set_mux32((*ctrl)->control_padconf_core_base, diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index d464855..1b05150 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -107,16 +107,6 @@ int board_late_init(void) return 0; } -static void do_set_mux32(u32 base, - struct pad_conf_entry const *array, int size) -{ - int i; - struct pad_conf_entry *pad = (struct pad_conf_entry *)array; - - for (i = 0; i < size; i++, pad++) - writel(pad->val, base + pad->offset); -} - void set_muxconf_regs_essential(void) { do_set_mux32((*ctrl)->control_padconf_core_base, -- cgit v0.10.2 From 6ae4c3efbd6270e612cd78b9c934cc627339441b Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Thu, 4 Jun 2015 16:42:34 +0530 Subject: ARM: DRA7: Add pinctrl register definitions Adopting the pinctrl register definitions from Linux kernel to be consistent. Old definitions will be removed once all the pinctrl data is adapted to new definitions. Signed-off-by: Lokesh Vutla Signed-off-by: Nishanth Menon diff --git a/arch/arm/include/asm/arch-omap5/mux_dra7xx.h b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h index e155387..13a8099 100644 --- a/arch/arm/include/asm/arch-omap5/mux_dra7xx.h +++ b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h @@ -26,6 +26,21 @@ #define WKEN (1 << 24) #define WKDIS (0 << 24) +#define PULL_ENA (0 << 16) +#define PULL_DIS (1 << 16) +#define PULL_UP (1 << 17) +#define INPUT_EN (1 << 18) +#define SLEWCONTROL (1 << 19) + +/* Active pin states */ +#define PIN_OUTPUT (0 | PULL_DIS) +#define PIN_OUTPUT_PULLUP (PULL_UP) +#define PIN_OUTPUT_PULLDOWN (0) +#define PIN_INPUT (INPUT_EN | PULL_DIS) +#define PIN_INPUT_SLEW (INPUT_EN | SLEWCONTROL) +#define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP) +#define PIN_INPUT_PULLDOWN (PULL_ENA | INPUT_EN) + #define M0 0 #define M1 1 #define M2 2 -- cgit v0.10.2 From 61d383d0f761a8db2286e563a151fc9083543def Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Thu, 4 Jun 2015 16:42:35 +0530 Subject: ARM: DRA7: Add support for virtual mode configuration In addition to the regular mux configuration, certain pins of DRA7 require to have "virtual mode" also programmed. This allows for predefined delay characteristics to be used by the SoC to meet timing characterstics needed for the interface. Provide easy to use macro to do the same. For configuring virtual mode, along with normal pad configuration add the following two steps: - Select MODESELECT field of each assocaited PAD. CTRL_CORE_PAD_XXX[8]:MODESELECT = 1 - DELAYMODE filed should be configured with value given in DATA Manual. CTRL_CORE_PAD_XXX[7:4]:DELAYMODE =[0-15] (as given in DATA manual). Signed-off-by: Lokesh Vutla Signed-off-by: Nishanth Menon diff --git a/arch/arm/include/asm/arch-omap5/mux_dra7xx.h b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h index 13a8099..13c288b 100644 --- a/arch/arm/include/asm/arch-omap5/mux_dra7xx.h +++ b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h @@ -58,6 +58,26 @@ #define M14 14 #define M15 15 +#define MODE_SELECT (1 << 8) +#define DELAYMODE_SHIFT 4 + +#define VIRTUAL_MODE0 (MODE_SELECT | (0x0 << DELAYMODE_SHIFT)) +#define VIRTUAL_MODE1 (MODE_SELECT | (0x1 << DELAYMODE_SHIFT)) +#define VIRTUAL_MODE2 (MODE_SELECT | (0x2 << DELAYMODE_SHIFT)) +#define VIRTUAL_MODE3 (MODE_SELECT | (0x3 << DELAYMODE_SHIFT)) +#define VIRTUAL_MODE4 (MODE_SELECT | (0x4 << DELAYMODE_SHIFT)) +#define VIRTUAL_MODE5 (MODE_SELECT | (0x5 << DELAYMODE_SHIFT)) +#define VIRTUAL_MODE6 (MODE_SELECT | (0x6 << DELAYMODE_SHIFT)) +#define VIRTUAL_MODE7 (MODE_SELECT | (0x7 << DELAYMODE_SHIFT)) +#define VIRTUAL_MODE8 (MODE_SELECT | (0x8 << DELAYMODE_SHIFT)) +#define VIRTUAL_MODE9 (MODE_SELECT | (0x9 << DELAYMODE_SHIFT)) +#define VIRTUAL_MODE10 (MODE_SELECT | (0xa << DELAYMODE_SHIFT)) +#define VIRTUAL_MODE11 (MODE_SELECT | (0xb << DELAYMODE_SHIFT)) +#define VIRTUAL_MODE12 (MODE_SELECT | (0xc << DELAYMODE_SHIFT)) +#define VIRTUAL_MODE13 (MODE_SELECT | (0xd << DELAYMODE_SHIFT)) +#define VIRTUAL_MODE14 (MODE_SELECT | (0xe << DELAYMODE_SHIFT)) +#define VIRTUAL_MODE15 (MODE_SELECT | (0xf << DELAYMODE_SHIFT)) + #define SAFE_MODE M15 #define GPMC_AD0 0x000 -- cgit v0.10.2 From eda6fbcc8c715a48c6b19541fed684efa3c49dbb Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Thu, 4 Jun 2015 16:42:36 +0530 Subject: ARM: DRA7: Add support for IO delay configuration On DRA7, in addition to the regular muxing of pins, an additional hardware module called IODelay which is also expected to be configured. This "IODelay" module has it's own register space that is independent of the control module. It is advocated strongly in TI's official documentation considering the existing design of the DRA7 family of processors during mux or IODelay recalibration, there is a potential for a significant glitch which may cause functional impairment to certain hardware. It is hence recommended to do muxing as part of IOdelay recalibration. IODELAY recalibration sequence: - Complete AVS voltage change on VDD_CORE_L - Unlock IODLAY config registers. - Perform IO delay calibration with predefined values. - Isolate all the IOs - Update the delay mechanism for each IO with new calibrated values. - Configure PAD configuration registers - De-isolate all the IOs. - Relock IODELAY config registers. Signed-off-by: Lokesh Vutla Signed-off-by: Nishanth Menon diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c index 03674e6..fa04bbe 100644 --- a/arch/arm/cpu/armv7/omap-common/clocks-common.c +++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c @@ -508,6 +508,12 @@ static u32 optimize_vcore_voltage(struct volts const *v) return val; } +#ifdef CONFIG_IODELAY_RECALIBRATION +void __weak recalibrate_iodelay(void) +{ +} +#endif + /* * Setup the voltages for the main SoC core power domains. * We start with the maximum voltages allowed here, as set in the corresponding @@ -561,6 +567,16 @@ void scale_vcores(struct vcores_data const *vcores) debug("cor: %d\n", vcores->core.value); do_scale_vcore(vcores->core.addr, vcores->core.value, vcores->core.pmic); + /* + * IO delay recalibration should be done immediately after + * adjusting AVS voltages for VDD_CORE_L. + * Respective boards should call __recalibrate_iodelay() + * with proper mux, virtual and manual mode configurations. + */ +#ifdef CONFIG_IODELAY_RECALIBRATION + recalibrate_iodelay(); +#endif + debug("mpu: %d\n", vcores->mpu.value); do_scale_vcore(vcores->mpu.addr, vcores->mpu.value, vcores->mpu.pmic); /* Configure MPU ABB LDO after scale */ @@ -587,6 +603,16 @@ void scale_vcores(struct vcores_data const *vcores) val = optimize_vcore_voltage(&vcores->core); do_scale_vcore(vcores->core.addr, val, vcores->core.pmic); + /* + * IO delay recalibration should be done immediately after + * adjusting AVS voltages for VDD_CORE_L. + * Respective boards should call __recalibrate_iodelay() + * with proper mux, virtual and manual mode configurations. + */ +#ifdef CONFIG_IODELAY_RECALIBRATION + recalibrate_iodelay(); +#endif + val = optimize_vcore_voltage(&vcores->mpu); do_scale_vcore(vcores->mpu.addr, val, vcores->mpu.pmic); diff --git a/arch/arm/cpu/armv7/omap5/Makefile b/arch/arm/cpu/armv7/omap5/Makefile index 64c6879..e709f14 100644 --- a/arch/arm/cpu/armv7/omap5/Makefile +++ b/arch/arm/cpu/armv7/omap5/Makefile @@ -11,3 +11,4 @@ obj-y += sdram.o obj-y += prcm-regs.o obj-y += hw_data.o obj-y += abb.o +obj-$(CONFIG_IODELAY_RECALIBRATION) += dra7xx_iodelay.o diff --git a/arch/arm/cpu/armv7/omap5/dra7xx_iodelay.c b/arch/arm/cpu/armv7/omap5/dra7xx_iodelay.c new file mode 100644 index 0000000..4b8ba26 --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/dra7xx_iodelay.c @@ -0,0 +1,139 @@ +/* + * (C) Copyright 2015 + * Texas Instruments Incorporated, + * + * Lokesh Vutla + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include + +static int isolate_io(u32 isolate) +{ + if (isolate) { + clrsetbits_le32((*ctrl)->control_pbias, SDCARD_PWRDNZ, + SDCARD_PWRDNZ); + clrsetbits_le32((*ctrl)->control_pbias, SDCARD_BIAS_PWRDNZ, + SDCARD_BIAS_PWRDNZ); + } + + /* Override control on ISOCLKIN signal to IO pad ring. */ + clrsetbits_le32((*prcm)->prm_io_pmctrl, PMCTRL_ISOCLK_OVERRIDE_MASK, + PMCTRL_ISOCLK_OVERRIDE_CTRL); + if (!wait_on_value(PMCTRL_ISOCLK_STATUS_MASK, PMCTRL_ISOCLK_STATUS_MASK, + (u32 *)(*prcm)->prm_io_pmctrl, LDELAY)) + return ERR_DEISOLATE_IO << isolate; + + /* Isolate/Deisolate IO */ + clrsetbits_le32((*ctrl)->ctrl_core_sma_sw_0, CTRL_ISOLATE_MASK, + isolate << CTRL_ISOLATE_SHIFT); + /* Dummy read to add delay t > 10ns */ + readl((*ctrl)->ctrl_core_sma_sw_0); + + /* Return control on ISOCLKIN to hardware */ + clrsetbits_le32((*prcm)->prm_io_pmctrl, PMCTRL_ISOCLK_OVERRIDE_MASK, + PMCTRL_ISOCLK_NOT_OVERRIDE_CTRL); + if (!wait_on_value(PMCTRL_ISOCLK_STATUS_MASK, + 0 << PMCTRL_ISOCLK_STATUS_SHIFT, + (u32 *)(*prcm)->prm_io_pmctrl, LDELAY)) + return ERR_DEISOLATE_IO << isolate; + + return 0; +} + +static int calibrate_iodelay(u32 base) +{ + u32 reg; + + /* Configure REFCLK period */ + reg = readl(base + CFG_REG_2_OFFSET); + reg &= ~CFG_REG_REFCLK_PERIOD_MASK; + reg |= CFG_REG_REFCLK_PERIOD; + writel(reg, base + CFG_REG_2_OFFSET); + + /* Initiate Calibration */ + clrsetbits_le32(base + CFG_REG_0_OFFSET, CFG_REG_CALIB_STRT_MASK, + CFG_REG_CALIB_STRT << CFG_REG_CALIB_STRT_SHIFT); + if (!wait_on_value(CFG_REG_CALIB_STRT_MASK, CFG_REG_CALIB_END, + (u32 *)(base + CFG_REG_0_OFFSET), LDELAY)) + return ERR_CALIBRATE_IODELAY; + + return 0; +} + +static int update_delay_mechanism(u32 base) +{ + /* Initiate the reload of calibrated values. */ + clrsetbits_le32(base + CFG_REG_0_OFFSET, CFG_REG_ROM_READ_MASK, + CFG_REG_ROM_READ_START); + if (!wait_on_value(CFG_REG_ROM_READ_MASK, CFG_REG_ROM_READ_END, + (u32 *)(base + CFG_REG_0_OFFSET), LDELAY)) + return ERR_UPDATE_DELAY; + + return 0; +} + +void __recalibrate_iodelay(struct pad_conf_entry const *pad, int npads) +{ + int ret = 0; + + /* IO recalibration should be done only from SRAM */ + if (OMAP_INIT_CONTEXT_SPL != omap_hw_init_context()) { + puts("IODELAY recalibration called from invalid context - use only from SPL in SRAM\n"); + return; + } + + /* unlock IODELAY CONFIG registers */ + writel(CFG_IODELAY_UNLOCK_KEY, (*ctrl)->iodelay_config_base + + CFG_REG_8_OFFSET); + + ret = calibrate_iodelay((*ctrl)->iodelay_config_base); + if (ret) + goto err; + + ret = isolate_io(ISOLATE_IO); + if (ret) + goto err; + + ret = update_delay_mechanism((*ctrl)->iodelay_config_base); + if (ret) + goto err; + + /* Configure Mux settings */ + do_set_mux32((*ctrl)->control_padconf_core_base, pad, npads); + + ret = isolate_io(DEISOLATE_IO); + +err: + /* lock IODELAY CONFIG registers */ + writel(CFG_IODELAY_LOCK_KEY, (*ctrl)->iodelay_config_base + + CFG_REG_8_OFFSET); + /* + * UART cannot be used during IO recalibration sequence as IOs are in + * isolation. So error handling and debug prints are done after + * complete IO delay recalibration sequence + */ + switch (ret) { + case ERR_CALIBRATE_IODELAY: + puts("IODELAY: IO delay calibration sequence failed\n"); + break; + case ERR_ISOLATE_IO: + puts("IODELAY: Isolation of Device IOs failed\n"); + break; + case ERR_UPDATE_DELAY: + puts("IODELAY: Delay mechanism update with new calibrated values failed\n"); + break; + case ERR_DEISOLATE_IO: + puts("IODELAY: De-isolation of Device IOs failed\n"); + break; + default: + debug("IODELAY: IO delay recalibration successfully completed\n"); + } +} diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c index f80d36d..0547037 100644 --- a/arch/arm/cpu/armv7/omap5/prcm-regs.c +++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c @@ -378,6 +378,7 @@ struct omap_sys_ctrl_regs const dra7xx_ctrl = { .control_status = 0x4A002134, .control_phy_power_usb = 0x4A002370, .control_phy_power_sata = 0x4A002374, + .ctrl_core_sma_sw_0 = 0x4A0023FC, .control_core_mac_id_0_lo = 0x4A002514, .control_core_mac_id_0_hi = 0x4A002518, .control_core_mac_id_1_lo = 0x4A00251C, @@ -457,6 +458,7 @@ struct omap_sys_ctrl_regs const dra7xx_ctrl = { .control_efuse_3 = 0x4AE0C5D0, .control_efuse_4 = 0x4AE0C5D4, .control_efuse_13 = 0x4AE0C5F0, + .iodelay_config_base = 0x4844A000, }; struct prcm_regs const omap5_es2_prcm = { @@ -976,6 +978,7 @@ struct prcm_regs const dra7xx_prcm = { .prm_rstctrl = 0x4ae07d00, .prm_rstst = 0x4ae07d04, .prm_rsttime = 0x4ae07d08, + .prm_io_pmctrl = 0x4ae07d20, .prm_vc_val_bypass = 0x4ae07da0, .prm_vc_cfg_i2c_mode = 0x4ae07db4, .prm_vc_cfg_i2c_clk = 0x4ae07db8, diff --git a/arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h b/arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h new file mode 100644 index 0000000..a924629 --- /dev/null +++ b/arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h @@ -0,0 +1,58 @@ +/* + * (C) Copyright 2015 + * Texas Instruments Incorporated + * + * Lokesh Vutla + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _DRA7_IODELAY_H_ +#define _DRA7_IODELAY_H_ + +#include +#include + +/* CONFIG_REG_0 */ +#define CFG_REG_0_OFFSET 0xC +#define CFG_REG_ROM_READ_SHIFT 1 +#define CFG_REG_ROM_READ_MASK (1 << 1) +#define CFG_REG_CALIB_STRT_SHIFT 0 +#define CFG_REG_CALIB_STRT_MASK (1 << 0) +#define CFG_REG_CALIB_STRT 1 +#define CFG_REG_CALIB_END 0 +#define CFG_REG_ROM_READ_START (1 << 1) +#define CFG_REG_ROM_READ_END (0 << 1) + +/* CONFIG_REG_2 */ +#define CFG_REG_2_OFFSET 0x14 +#define CFG_REG_REFCLK_PERIOD_SHIFT 0 +#define CFG_REG_REFCLK_PERIOD_MASK (0xFFFF << 0) +#define CFG_REG_REFCLK_PERIOD 0x2EF + +/* CONFIG_REG_8 */ +#define CFG_REG_8_OFFSET 0x2C +#define CFG_IODELAY_UNLOCK_KEY 0x0000AAAA +#define CFG_IODELAY_LOCK_KEY 0x0000AAAB + +/* CTRL_CORE_SMA_SW_0 */ +#define CTRL_ISOLATE_SHIFT 2 +#define CTRL_ISOLATE_MASK (1 << 2) +#define ISOLATE_IO 1 +#define DEISOLATE_IO 0 + +/* PRM_IO_PMCTRL */ +#define PMCTRL_ISOCLK_OVERRIDE_SHIFT 0 +#define PMCTRL_ISOCLK_OVERRIDE_MASK (1 << 0) +#define PMCTRL_ISOCLK_STATUS_SHIFT 1 +#define PMCTRL_ISOCLK_STATUS_MASK (1 << 1) +#define PMCTRL_ISOCLK_OVERRIDE_CTRL 1 +#define PMCTRL_ISOCLK_NOT_OVERRIDE_CTRL 0 + +#define ERR_CALIBRATE_IODELAY 0x1 +#define ERR_DEISOLATE_IO 0x2 +#define ERR_ISOLATE_IO 0x4 +#define ERR_UPDATE_DELAY 0x8 + +void __recalibrate_iodelay(struct pad_conf_entry const *array, int npads); +#endif diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 50f178b..12c2207 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -313,6 +313,7 @@ struct prcm_regs { u32 prm_rstctrl; u32 prm_rstst; u32 prm_rsttime; + u32 prm_io_pmctrl; u32 prm_vc_val_bypass; u32 prm_vc_cfg_i2c_mode; u32 prm_vc_cfg_i2c_clk; @@ -455,6 +456,8 @@ struct omap_sys_ctrl_regs { u32 control_efuse_12; u32 control_efuse_13; u32 control_padconf_wkup_base; + u32 iodelay_config_base; + u32 ctrl_core_sma_sw_0; }; struct dpll_params { @@ -583,6 +586,7 @@ s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb); void usb_fake_mac_from_die_id(u32 *id); void usb_set_serial_num_from_die_id(u32 *id); +void recalibrate_iodelay(void); void omap_smc1(u32 service, u32 val); -- cgit v0.10.2 From 71bed1855ff1f0b9702ecedd1ece486ebc915779 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Thu, 4 Jun 2015 16:42:37 +0530 Subject: ARM: DRA7: Add support for manual mode configuration In addition to the regular mux configuration, certain pins of DRA7 require to have "manual mode" also programmed, when predefined delay characteristics cannot be used for the interface. struct iodelay_cfg_entry is introduced for populating manual mode IO timings. For configuring manual mode, along with the normal pad configuration do the following steps: - Select MODESELECT field of each assocaited PAD. CTRL_CORE_PAD_XXX[8]:MODESELECT = 1(Enable MANUAL_MODE macro along with mux) - Populate A_DELAY, G_DELAY values that are specified in DATA MANUAL. And pass the offset of the CFG_XXX register in iodelay_cfg_entry. Signed-off-by: Lokesh Vutla Signed-off-by: Nishanth Menon diff --git a/arch/arm/cpu/armv7/omap5/dra7xx_iodelay.c b/arch/arm/cpu/armv7/omap5/dra7xx_iodelay.c index 4b8ba26..9fa6e69 100644 --- a/arch/arm/cpu/armv7/omap5/dra7xx_iodelay.c +++ b/arch/arm/cpu/armv7/omap5/dra7xx_iodelay.c @@ -13,6 +13,7 @@ #include #include #include +#include #include static int isolate_io(u32 isolate) @@ -80,7 +81,94 @@ static int update_delay_mechanism(u32 base) return 0; } -void __recalibrate_iodelay(struct pad_conf_entry const *pad, int npads) +static u32 calculate_delay(u32 base, u16 offset, u16 den) +{ + u16 refclk_period, dly_cnt, ref_cnt; + u32 reg, q, r; + + refclk_period = readl(base + CFG_REG_2_OFFSET) & + CFG_REG_REFCLK_PERIOD_MASK; + + reg = readl(base + offset); + dly_cnt = (reg & CFG_REG_DLY_CNT_MASK) >> CFG_REG_DLY_CNT_SHIFT; + ref_cnt = (reg & CFG_REG_REF_CNT_MASK) >> CFG_REG_REF_CNT_SHIFT; + + if (!dly_cnt || !den) + return 0; + + /* + * To avoid overflow and integer truncation, delay value + * is calculated as quotient + remainder. + */ + q = 5 * ((ref_cnt * refclk_period) / (dly_cnt * den)); + r = (10 * ((ref_cnt * refclk_period) % (dly_cnt * den))) / + (2 * dly_cnt * den); + + return q + r; +} + +static u32 get_cfg_reg(u16 a_delay, u16 g_delay, u32 cpde, u32 fpde) +{ + u32 g_delay_coarse, g_delay_fine; + u32 a_delay_coarse, a_delay_fine; + u32 c_elements, f_elements; + u32 total_delay, reg = 0; + + g_delay_coarse = g_delay / 920; + g_delay_fine = ((g_delay % 920) * 10) / 60; + + a_delay_coarse = a_delay / cpde; + a_delay_fine = ((a_delay % cpde) * 10) / fpde; + + c_elements = g_delay_coarse + a_delay_coarse; + f_elements = (g_delay_fine + a_delay_fine) / 10; + + if (f_elements > 22) { + total_delay = c_elements * cpde + f_elements * fpde; + + c_elements = total_delay / cpde; + f_elements = (total_delay % cpde) / fpde; + } + + reg = (c_elements << CFG_X_COARSE_DLY_SHIFT) & CFG_X_COARSE_DLY_MASK; + reg |= (f_elements << CFG_X_FINE_DLY_SHIFT) & CFG_X_FINE_DLY_MASK; + reg |= CFG_X_SIGNATURE << CFG_X_SIGNATURE_SHIFT; + reg |= CFG_X_LOCK << CFG_X_LOCK_SHIFT; + + return reg; +} + +static int do_set_iodelay(u32 base, struct iodelay_cfg_entry const *array, + int niodelays) +{ + struct iodelay_cfg_entry *iodelay = (struct iodelay_cfg_entry *)array; + u32 reg, cpde, fpde, i; + + if (!niodelays) + return 0; + + cpde = calculate_delay((*ctrl)->iodelay_config_base, CFG_REG_3_OFFSET, + 88); + if (!cpde) + return ERR_CPDE; + + fpde = calculate_delay((*ctrl)->iodelay_config_base, CFG_REG_4_OFFSET, + 264); + if (!fpde) + return ERR_FPDE; + + for (i = 0; i < niodelays; i++, iodelay++) { + reg = get_cfg_reg(iodelay->a_delay, iodelay->g_delay, cpde, + fpde); + writel(reg, base + iodelay->offset); + } + + return 0; +} + +void __recalibrate_iodelay(struct pad_conf_entry const *pad, int npads, + struct iodelay_cfg_entry const *iodelay, + int niodelays) { int ret = 0; @@ -109,6 +197,11 @@ void __recalibrate_iodelay(struct pad_conf_entry const *pad, int npads) /* Configure Mux settings */ do_set_mux32((*ctrl)->control_padconf_core_base, pad, npads); + /* Configure Manual IO timing modes */ + ret = do_set_iodelay((*ctrl)->iodelay_config_base, iodelay, niodelays); + if (ret) + goto err; + ret = isolate_io(DEISOLATE_IO); err: @@ -133,6 +226,12 @@ err: case ERR_DEISOLATE_IO: puts("IODELAY: De-isolation of Device IOs failed\n"); break; + case ERR_CPDE: + puts("IODELAY: CPDE calculation failed\n"); + break; + case ERR_FPDE: + puts("IODELAY: FPDE calculation failed\n"); + break; default: debug("IODELAY: IO delay recalibration successfully completed\n"); } diff --git a/arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h b/arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h index a924629..2f53d85 100644 --- a/arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h +++ b/arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h @@ -35,6 +35,14 @@ #define CFG_IODELAY_UNLOCK_KEY 0x0000AAAA #define CFG_IODELAY_LOCK_KEY 0x0000AAAB +/* CONFIG_REG_3/4 */ +#define CFG_REG_3_OFFSET 0x18 +#define CFG_REG_4_OFFSET 0x1C +#define CFG_REG_DLY_CNT_SHIFT 16 +#define CFG_REG_DLY_CNT_MASK (0xFFFF << 16) +#define CFG_REG_REF_CNT_SHIFT 0 +#define CFG_REG_REF_CNT_MASK (0xFFFF << 0) + /* CTRL_CORE_SMA_SW_0 */ #define CTRL_ISOLATE_SHIFT 2 #define CTRL_ISOLATE_MASK (1 << 2) @@ -53,6 +61,23 @@ #define ERR_DEISOLATE_IO 0x2 #define ERR_ISOLATE_IO 0x4 #define ERR_UPDATE_DELAY 0x8 +#define ERR_CPDE 0x3 +#define ERR_FPDE 0x5 + +/* CFG_XXX */ +#define CFG_X_SIGNATURE_SHIFT 12 +#define CFG_X_SIGNATURE_MASK (0x3F << 12) +#define CFG_X_LOCK_SHIFT 10 +#define CFG_X_LOCK_MASK (0x1 << 10) +#define CFG_X_COARSE_DLY_SHIFT 5 +#define CFG_X_COARSE_DLY_MASK (0x1F << 5) +#define CFG_X_FINE_DLY_SHIFT 0 +#define CFG_X_FINE_DLY_MASK (0x1F << 0) +#define CFG_X_SIGNATURE 0x29 +#define CFG_X_LOCK 1 + +void __recalibrate_iodelay(struct pad_conf_entry const *pad, int npads, + struct iodelay_cfg_entry const *iodelay, + int niodelays); -void __recalibrate_iodelay(struct pad_conf_entry const *array, int npads); #endif diff --git a/arch/arm/include/asm/arch-omap5/mux_dra7xx.h b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h index 13c288b..2115abb 100644 --- a/arch/arm/include/asm/arch-omap5/mux_dra7xx.h +++ b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h @@ -61,6 +61,8 @@ #define MODE_SELECT (1 << 8) #define DELAYMODE_SHIFT 4 +#define MANUAL_MODE MODE_SELECT + #define VIRTUAL_MODE0 (MODE_SELECT | (0x0 << DELAYMODE_SHIFT)) #define VIRTUAL_MODE1 (MODE_SELECT | (0x1 << DELAYMODE_SHIFT)) #define VIRTUAL_MODE2 (MODE_SELECT | (0x2 << DELAYMODE_SHIFT)) diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h index b41bf15..6da8297 100644 --- a/arch/arm/include/asm/arch-omap5/sys_proto.h +++ b/arch/arm/include/asm/arch-omap5/sys_proto.h @@ -18,6 +18,18 @@ DECLARE_GLOBAL_DATA_PTR; +/* + * Structure for Iodelay configuration registers. + * Theoretical max for g_delay is 21560 ps. + * Theoretical max for a_delay is 1/3rd of g_delay max. + * So using u16 for both a/g_delay. + */ +struct iodelay_cfg_entry { + u16 offset; + u16 a_delay; + u16 g_delay; +}; + struct pad_conf_entry { u32 offset; u32 val; -- cgit v0.10.2 From 706dd3489391ffc4d1e7e84f7401b7f34b699d6f Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Thu, 4 Jun 2015 16:42:38 +0530 Subject: ARM: DRA7-evm: Enable IO delay recalibration sequence Enabling IO delay recalibration sequence for DRA7 EVM. UART and I2C are configured before IO delay recalibration sequence as these are used earlier and safe to use. Signed-off-by: Lokesh Vutla Signed-off-by: Nishanth Menon diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index 1b05150..06adaac 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -110,11 +111,18 @@ int board_late_init(void) void set_muxconf_regs_essential(void) { do_set_mux32((*ctrl)->control_padconf_core_base, - core_padconf_array_essential, - sizeof(core_padconf_array_essential) / - sizeof(struct pad_conf_entry)); + early_padconf, ARRAY_SIZE(early_padconf)); } +#ifdef CONFIG_IODELAY_RECALIBRATION +void recalibrate_iodelay(void) +{ + __recalibrate_iodelay(core_padconf_array_essential, + ARRAY_SIZE(core_padconf_array_essential), + iodelay_cfg_array, ARRAY_SIZE(iodelay_cfg_array)); +} +#endif + #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) int board_mmc_init(bd_t *bis) { diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 77edc21..afcc36b 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -15,6 +15,10 @@ #define CONFIG_DRA7XX #define CONFIG_BOARD_EARLY_INIT_F +#ifdef CONFIG_SPL_BUILD +#define CONFIG_IODELAY_RECALIBRATION +#endif + #ifndef CONFIG_QSPI_BOOT /* MMC ENV related defines */ #define CONFIG_ENV_IS_IN_MMC -- cgit v0.10.2 From 27d170af17bf17ccc3529bc460da0632a574b819 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Thu, 4 Jun 2015 16:42:39 +0530 Subject: ARM: DRA7-evm: Add mux data Adding the mux data, manual and virtual mode settings for DRA7-evm. Signed-off-by: Nishanth Menon Signed-off-by: Lokesh Vutla Signed-off-by: Peter Ujfalusi Signed-off-by: Tomi Valkeinen Signed-off-by: Vishal Mahaveer diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index 06adaac..9941afa 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -117,9 +117,17 @@ void set_muxconf_regs_essential(void) #ifdef CONFIG_IODELAY_RECALIBRATION void recalibrate_iodelay(void) { - __recalibrate_iodelay(core_padconf_array_essential, - ARRAY_SIZE(core_padconf_array_essential), - iodelay_cfg_array, ARRAY_SIZE(iodelay_cfg_array)); + if (is_dra72x()) { + __recalibrate_iodelay(core_padconf_array_essential, + ARRAY_SIZE(core_padconf_array_essential), + iodelay_cfg_array, + ARRAY_SIZE(iodelay_cfg_array)); + } else { + __recalibrate_iodelay(dra74x_core_padconf_array, + ARRAY_SIZE(dra74x_core_padconf_array), + dra742_iodelay_cfg_array, + ARRAY_SIZE(dra742_iodelay_cfg_array)); + } } #endif diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h index 4824077..c9301a5 100644 --- a/board/ti/dra7xx/mux_data.h +++ b/board/ti/dra7xx/mux_data.h @@ -76,30 +76,30 @@ const struct pad_conf_entry core_padconf_array_essential[] = { {I2C1_SCL, (IEN | PTU | PDIS | M0)}, /* I2C1_SCL */ {MDIO_MCLK, (PTU | PEN | M0)}, /* MDIO_MCLK */ {MDIO_D, (IEN | PTU | PEN | M0)}, /* MDIO_D */ - {RGMII0_TXC, (M0) }, - {RGMII0_TXCTL, (M0) }, - {RGMII0_TXD3, (M0) }, - {RGMII0_TXD2, (M0) }, - {RGMII0_TXD1, (M0) }, - {RGMII0_TXD0, (M0) }, - {RGMII0_RXC, (IEN | M0) }, - {RGMII0_RXCTL, (IEN | M0) }, - {RGMII0_RXD3, (IEN | M0) }, - {RGMII0_RXD2, (IEN | M0) }, - {RGMII0_RXD1, (IEN | M0) }, - {RGMII0_RXD0, (IEN | M0) }, - {VIN2A_D12, (M3) }, - {VIN2A_D13, (M3) }, - {VIN2A_D14, (M3) }, - {VIN2A_D15, (M3) }, - {VIN2A_D16, (M3) }, - {VIN2A_D17, (M3) }, - {VIN2A_D18, (IEN | M3)}, - {VIN2A_D19, (IEN | M3)}, - {VIN2A_D20, (IEN | M3)}, - {VIN2A_D21, (IEN | M3)}, - {VIN2A_D22, (IEN | M3)}, - {VIN2A_D23, (IEN | M3)}, + {RGMII0_TXC, (PIN_OUTPUT | MANUAL_MODE | M0) }, + {RGMII0_TXCTL, (PIN_OUTPUT | MANUAL_MODE | M0) }, + {RGMII0_TXD3, (PIN_OUTPUT | MANUAL_MODE | M0) }, + {RGMII0_TXD2, (PIN_OUTPUT | MANUAL_MODE | M0) }, + {RGMII0_TXD1, (PIN_OUTPUT | MANUAL_MODE | M0) }, + {RGMII0_TXD0, (PIN_OUTPUT | MANUAL_MODE | M0) }, + {RGMII0_RXC, (PIN_INPUT | MANUAL_MODE | M0) }, + {RGMII0_RXCTL, (PIN_INPUT | MANUAL_MODE | M0) }, + {RGMII0_RXD3, (PIN_INPUT | MANUAL_MODE | M0) }, + {RGMII0_RXD2, (PIN_INPUT | MANUAL_MODE | M0) }, + {RGMII0_RXD1, (PIN_INPUT | MANUAL_MODE | M0) }, + {RGMII0_RXD0, (PIN_INPUT | MANUAL_MODE | M0) }, + {VIN2A_D12, (PIN_OUTPUT | MANUAL_MODE | M3) }, + {VIN2A_D13, (PIN_OUTPUT | MANUAL_MODE | M3) }, + {VIN2A_D14, (PIN_OUTPUT | MANUAL_MODE | M3) }, + {VIN2A_D15, (PIN_OUTPUT | MANUAL_MODE | M3) }, + {VIN2A_D16, (PIN_OUTPUT | MANUAL_MODE | M3) }, + {VIN2A_D17, (PIN_OUTPUT | MANUAL_MODE | M3) }, + {VIN2A_D18, (PIN_INPUT | MANUAL_MODE | M3)}, + {VIN2A_D19, (PIN_INPUT | MANUAL_MODE | M3)}, + {VIN2A_D20, (PIN_INPUT | MANUAL_MODE | M3)}, + {VIN2A_D21, (PIN_INPUT | MANUAL_MODE | M3)}, + {VIN2A_D22, (PIN_INPUT | MANUAL_MODE | M3)}, + {VIN2A_D23, (PIN_INPUT | MANUAL_MODE | M3)}, #if defined(CONFIG_NAND) || defined(CONFIG_NOR) /* NAND / NOR pin-mux */ {GPMC_AD0 , M0 | IEN | PDIS}, /* GPMC_AD0 */ @@ -141,4 +141,295 @@ const struct pad_conf_entry core_padconf_array_essential[] = { {USB2_DRVVBUS, (M0 | IEN | FSC) }, {SPI1_CS1, (PEN | IDIS | M14) }, }; + +const struct pad_conf_entry early_padconf[] = { +#if (CONFIG_CONS_INDEX == 1) + {UART1_RXD, (PIN_INPUT_SLEW | M0)}, /* UART1_RXD */ + {UART1_TXD, (PIN_INPUT_SLEW | M0)}, /* UART1_TXD */ +#elif (CONFIG_CONS_INDEX == 3) + {UART3_RXD, (PIN_INPUT_SLEW | M0)}, /* UART3_RXD */ + {UART3_TXD, (PIN_INPUT_SLEW | M0)}, /* UART3_TXD */ +#endif + {I2C1_SDA, (PIN_INPUT | M0)}, /* I2C1_SDA */ + {I2C1_SCL, (PIN_INPUT | M0)}, /* I2C1_SCL */ +}; + +#ifdef CONFIG_IODELAY_RECALIBRATION +const struct iodelay_cfg_entry iodelay_cfg_array[] = { + {0x6F0, 480, 0}, /* RGMMI0_RXC_IN */ + {0x6FC, 111, 1641}, /* RGMMI0_RXCTL_IN */ + {0x708, 272, 1116}, /* RGMMI0_RXD0_IN */ + {0x714, 243, 1260}, /* RGMMI0_RXD1_IN */ + {0x720, 0, 1614}, /* RGMMI0_RXD2_IN */ + {0x72C, 105, 1673}, /* RGMMI0_RXD3_IN */ + {0x740, 531, 120}, /* RGMMI0_TXC_OUT */ + {0x74C, 11, 60}, /* RGMMI0_TXCTL_OUT */ + {0x758, 7, 120}, /* RGMMI0_TXD0_OUT */ + {0x764, 0, 0}, /* RGMMI0_TXD1_OUT */ + {0x770, 276, 120}, /* RGMMI0_TXD2_OUT */ + {0x77C, 440, 120}, /* RGMMI0_TXD3_OUT */ + {0xAB0, 702, 0}, /* CFG_VIN2A_D18_IN */ + {0xABC, 136, 976}, /* CFG_VIN2A_D19_IN */ + {0xAD4, 210, 1357}, /* CFG_VIN2A_D20_IN */ + {0xAE0, 189, 1462}, /* CFG_VIN2A_D21_IN */ + {0xAEC, 232, 1278}, /* CFG_VIN2A_D22_IN */ + {0xAF8, 0, 1397}, /* CFG_VIN2A_D23_IN */ + {0xA70, 1551, 115}, /* CFG_VIN2A_D12_OUT */ + {0xA7C, 816, 0}, /* CFG_VIN2A_D13_OUT */ + {0xA88, 876, 0}, /* CFG_VIN2A_D14_OUT */ + {0xA94, 312, 0}, /* CFG_VIN2A_D15_OUT */ + {0xAA0, 58, 0}, /* CFG_VIN2A_D16_OUT */ + {0xAAC, 0, 0}, /* CFG_VIN2A_D17_OUT */ +}; +#endif + +const struct pad_conf_entry dra74x_core_padconf_array[] = { + {GPMC_AD0, (M3 | PIN_INPUT)}, /* gpmc_ad0.vout3_d0 */ + {GPMC_AD1, (M3 | PIN_INPUT)}, /* gpmc_ad1.vout3_d1 */ + {GPMC_AD2, (M3 | PIN_INPUT)}, /* gpmc_ad2.vout3_d2 */ + {GPMC_AD3, (M3 | PIN_INPUT)}, /* gpmc_ad3.vout3_d3 */ + {GPMC_AD4, (M3 | PIN_INPUT)}, /* gpmc_ad4.vout3_d4 */ + {GPMC_AD5, (M3 | PIN_INPUT)}, /* gpmc_ad5.vout3_d5 */ + {GPMC_AD6, (M3 | PIN_INPUT)}, /* gpmc_ad6.vout3_d6 */ + {GPMC_AD7, (M3 | PIN_INPUT)}, /* gpmc_ad7.vout3_d7 */ + {GPMC_AD8, (M3 | PIN_INPUT)}, /* gpmc_ad8.vout3_d8 */ + {GPMC_AD9, (M3 | PIN_INPUT)}, /* gpmc_ad9.vout3_d9 */ + {GPMC_AD10, (M3 | PIN_INPUT)}, /* gpmc_ad10.vout3_d10 */ + {GPMC_AD11, (M3 | PIN_INPUT)}, /* gpmc_ad11.vout3_d11 */ + {GPMC_AD12, (M3 | PIN_INPUT)}, /* gpmc_ad12.vout3_d12 */ + {GPMC_AD13, (M3 | PIN_INPUT)}, /* gpmc_ad13.vout3_d13 */ + {GPMC_AD14, (M3 | PIN_INPUT)}, /* gpmc_ad14.vout3_d14 */ + {GPMC_AD15, (M3 | PIN_INPUT)}, /* gpmc_ad15.vout3_d15 */ + {GPMC_A0, (M3 | PIN_INPUT_PULLDOWN)}, /* gpmc_a0.vout3_d16 */ + {GPMC_A1, (M3 | PIN_INPUT_PULLDOWN)}, /* gpmc_a1.vout3_d17 */ + {GPMC_A2, (M3 | PIN_INPUT_PULLDOWN)}, /* gpmc_a2.vout3_d18 */ + {GPMC_A3, (M3 | PIN_INPUT_PULLDOWN)}, /* gpmc_a3.vout3_d19 */ + {GPMC_A4, (M3 | PIN_INPUT_PULLDOWN)}, /* gpmc_a4.vout3_d20 */ + {GPMC_A5, (M3 | PIN_INPUT_PULLDOWN)}, /* gpmc_a5.vout3_d21 */ + {GPMC_A6, (M3 | PIN_INPUT_PULLDOWN)}, /* gpmc_a6.vout3_d22 */ + {GPMC_A7, (M3 | PIN_INPUT_PULLDOWN)}, /* gpmc_a7.vout3_d23 */ + {GPMC_A8, (M3 | PIN_INPUT_PULLDOWN)}, /* gpmc_a8.vout3_hsync */ + {GPMC_A9, (M3 | PIN_INPUT_PULLDOWN)}, /* gpmc_a9.vout3_vsync */ + {GPMC_A10, (M3 | PIN_INPUT_PULLDOWN)}, /* gpmc_a10.vout3_de */ + {GPMC_A11, (M14 | PIN_INPUT_PULLDOWN)}, /* gpmc_a11.gpio2_1 */ + {GPMC_A13, (M1 | PIN_INPUT_PULLDOWN)}, /* gpmc_a13.qspi1_rtclk */ + {GPMC_A14, (M1 | PIN_INPUT_PULLDOWN)}, /* gpmc_a14.qspi1_d3 */ + {GPMC_A15, (M1 | PIN_INPUT_PULLDOWN)}, /* gpmc_a15.qspi1_d2 */ + {GPMC_A16, (M1 | PIN_INPUT_PULLDOWN)}, /* gpmc_a16.qspi1_d0 */ + {GPMC_A17, (M1 | PIN_INPUT_PULLDOWN)}, /* gpmc_a17.qspi1_d1 */ + {GPMC_A18, (M1 | PIN_INPUT_PULLDOWN)}, /* gpmc_a18.qspi1_sclk */ + {GPMC_A19, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a19.mmc2_dat4 */ + {GPMC_A20, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a20.mmc2_dat5 */ + {GPMC_A21, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a21.mmc2_dat6 */ + {GPMC_A22, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a22.mmc2_dat7 */ + {GPMC_A23, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a23.mmc2_clk */ + {GPMC_A24, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a24.mmc2_dat0 */ + {GPMC_A25, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a25.mmc2_dat1 */ + {GPMC_A26, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a26.mmc2_dat2 */ + {GPMC_A27, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a27.mmc2_dat3 */ + {GPMC_CS1, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_cs1.mmc2_cmd */ + {GPMC_CS2, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_cs2.qspi1_cs0 */ + {GPMC_CS3, (M3 | PIN_INPUT_PULLUP)}, /* gpmc_cs3.vout3_clk */ + {VIN1A_CLK0, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_clk0.vin1a_clk0 */ + {VIN1A_DE0, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_de0.vin1a_de0 */ + {VIN1A_FLD0, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_fld0.vin1a_fld0 */ + {VIN1A_HSYNC0, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_hsync0.vin1a_hsync0 */ + {VIN1A_VSYNC0, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_vsync0.vin1a_vsync0 */ + {VIN1A_D0, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_d0.vin1a_d0 */ + {VIN1A_D1, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_d1.vin1a_d1 */ + {VIN1A_D2, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_d2.vin1a_d2 */ + {VIN1A_D3, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_d3.vin1a_d3 */ + {VIN1A_D4, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_d4.vin1a_d4 */ + {VIN1A_D5, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_d5.vin1a_d5 */ + {VIN1A_D6, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_d6.vin1a_d6 */ + {VIN1A_D7, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_d7.vin1a_d7 */ + {VIN1A_D8, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_d8.vin1a_d8 */ + {VIN1A_D9, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_d9.vin1a_d9 */ + {VIN1A_D10, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_d10.vin1a_d10 */ + {VIN1A_D11, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_d11.vin1a_d11 */ + {VIN1A_D12, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_d12.vin1a_d12 */ + {VIN1A_D13, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_d13.vin1a_d13 */ + {VIN1A_D14, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_d14.vin1a_d14 */ + {VIN1A_D15, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_d15.vin1a_d15 */ + {VIN1A_D16, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_d16.vin1a_d16 */ + {VIN1A_D17, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_d17.vin1a_d17 */ + {VIN1A_D18, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_d18.vin1a_d18 */ + {VIN1A_D19, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_d19.vin1a_d19 */ + {VIN1A_D20, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_d20.vin1a_d20 */ + {VIN1A_D21, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_d21.vin1a_d21 */ + {VIN1A_D22, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_d22.vin1a_d22 */ + {VIN1A_D23, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin1a_d23.vin1a_d23 */ + {VIN2A_D12, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d12.rgmii1_txc */ + {VIN2A_D13, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d13.rgmii1_txctl */ + {VIN2A_D14, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d14.rgmii1_txd3 */ + {VIN2A_D15, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d15.rgmii1_txd2 */ + {VIN2A_D16, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d16.rgmii1_txd1 */ + {VIN2A_D17, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d17.rgmii1_txd0 */ + {VIN2A_D18, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d18.rgmii1_rxc */ + {VIN2A_D19, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d19.rgmii1_rxctl */ + {VIN2A_D20, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d20.rgmii1_rxd3 */ + {VIN2A_D21, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d21.rgmii1_rxd2 */ + {VIN2A_D22, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d22.rgmii1_rxd1 */ + {VIN2A_D23, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d23.rgmii1_rxd0 */ + {VOUT1_CLK, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_clk.vout1_clk */ + {VOUT1_DE, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_de.vout1_de */ + {VOUT1_HSYNC, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_hsync.vout1_hsync */ + {VOUT1_VSYNC, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_vsync.vout1_vsync */ + {VOUT1_D0, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_d0.vout1_d0 */ + {VOUT1_D1, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_d1.vout1_d1 */ + {VOUT1_D2, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_d2.vout1_d2 */ + {VOUT1_D3, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_d3.vout1_d3 */ + {VOUT1_D4, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_d4.vout1_d4 */ + {VOUT1_D5, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_d5.vout1_d5 */ + {VOUT1_D6, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_d6.vout1_d6 */ + {VOUT1_D7, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_d7.vout1_d7 */ + {VOUT1_D8, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_d8.vout1_d8 */ + {VOUT1_D9, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_d9.vout1_d9 */ + {VOUT1_D10, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_d10.vout1_d10 */ + {VOUT1_D11, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_d11.vout1_d11 */ + {VOUT1_D12, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_d12.vout1_d12 */ + {VOUT1_D13, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_d13.vout1_d13 */ + {VOUT1_D14, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_d14.vout1_d14 */ + {VOUT1_D15, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_d15.vout1_d15 */ + {VOUT1_D16, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_d16.vout1_d16 */ + {VOUT1_D17, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_d17.vout1_d17 */ + {VOUT1_D18, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_d18.vout1_d18 */ + {VOUT1_D19, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_d19.vout1_d19 */ + {VOUT1_D20, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_d20.vout1_d20 */ + {VOUT1_D21, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_d21.vout1_d21 */ + {VOUT1_D22, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_d22.vout1_d22 */ + {VOUT1_D23, (M0 | PIN_INPUT_PULLDOWN)}, /* vout1_d23.vout1_d23 */ + {MDIO_MCLK, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* mdio_mclk.mdio_mclk */ + {MDIO_D, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* mdio_d.mdio_d */ + {RGMII0_TXC, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_txc.rgmii0_txc */ + {RGMII0_TXCTL, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_txctl.rgmii0_txctl */ + {RGMII0_TXD3, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_txd3.rgmii0_txd3 */ + {RGMII0_TXD2, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_txd2.rgmii0_txd2 */ + {RGMII0_TXD1, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_txd1.rgmii0_txd1 */ + {RGMII0_TXD0, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_txd0.rgmii0_txd0 */ + {RGMII0_RXC, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_rxc.rgmii0_rxc */ + {RGMII0_RXCTL, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_rxctl.rgmii0_rxctl */ + {RGMII0_RXD3, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_rxd3.rgmii0_rxd3 */ + {RGMII0_RXD2, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_rxd2.rgmii0_rxd2 */ + {RGMII0_RXD1, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_rxd1.rgmii0_rxd1 */ + {RGMII0_RXD0, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_rxd0.rgmii0_rxd0 */ + {USB1_DRVVBUS, (M0 | PIN_INPUT_SLEW)}, /* usb1_drvvbus.usb1_drvvbus */ + {USB2_DRVVBUS, (M0 | PIN_INPUT_SLEW)}, /* usb2_drvvbus.usb2_drvvbus */ + {GPIO6_14, (M9 | PIN_INPUT_PULLUP)}, /* gpio6_14.i2c3_sda */ + {GPIO6_15, (M9 | PIN_INPUT_PULLUP)}, /* gpio6_15.i2c3_scl */ + {GPIO6_16, (M14 | PIN_INPUT_PULLUP)}, /* gpio6_16.gpio6_16 */ + {XREF_CLK2, (M5 | PIN_INPUT_PULLDOWN)}, /* xref_clk2.atl_clk2 */ + {MCASP1_ACLKX, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp1_aclkx.mcasp1_aclkx */ + {MCASP1_FSX, (M0 | PIN_INPUT_SLEW)}, /* mcasp1_fsx.mcasp1_fsx */ + {MCASP1_AXR0, (M0 | PIN_INPUT_SLEW | VIRTUAL_MODE15)}, /* mcasp1_axr0.mcasp1_axr0 */ + {MCASP1_AXR1, (M0 | PIN_INPUT_SLEW)}, /* mcasp1_axr1.mcasp1_axr1 */ + {MCASP1_AXR2, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr2.gpio5_4 */ + {MCASP1_AXR3, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr3.gpio5_5 */ + {MCASP1_AXR4, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr4.gpio5_6 */ + {MCASP1_AXR5, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr5.gpio5_7 */ + {MCASP1_AXR6, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr6.gpio5_8 */ + {MCASP1_AXR7, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr7.gpio5_9 */ + {MCASP1_AXR12, (M1 | PIN_INPUT_SLEW | VIRTUAL_MODE10)}, /* mcasp1_axr12.mcasp7_axr0 */ + {MCASP1_AXR13, (M1 | PIN_INPUT_SLEW)}, /* mcasp1_axr13.mcasp7_axr1 */ + {MCASP1_AXR14, (M1 | PIN_INPUT_SLEW | VIRTUAL_MODE10)}, /* mcasp1_axr14.mcasp7_aclkx */ + {MCASP1_AXR15, (M1 | PIN_INPUT_SLEW | VIRTUAL_MODE10)}, /* mcasp1_axr15.mcasp7_fsx */ + {MCASP2_ACLKR, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_aclkr.mcasp2_aclkr */ + {MCASP3_ACLKX, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp3_aclkx.mcasp3_aclkx */ + {MCASP3_FSX, (M0 | PIN_INPUT_SLEW)}, /* mcasp3_fsx.mcasp3_fsx */ + {MCASP3_AXR0, (M0 | PIN_INPUT_SLEW)}, /* mcasp3_axr0.mcasp3_axr0 */ + {MCASP3_AXR1, (M0 | PIN_INPUT_SLEW | VIRTUAL_MODE6)}, /* mcasp3_axr1.mcasp3_axr1 */ + {MMC1_CLK, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_clk.mmc1_clk */ + {MMC1_CMD, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_cmd.mmc1_cmd */ + {MMC1_DAT0, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_dat0.mmc1_dat0 */ + {MMC1_DAT1, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_dat1.mmc1_dat1 */ + {MMC1_DAT2, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_dat2.mmc1_dat2 */ + {MMC1_DAT3, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_dat3.mmc1_dat3 */ + {MMC1_SDCD, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* mmc1_sdcd.mmc1_sdcd */ + {MMC1_SDWP, (M14 | PIN_INPUT_SLEW)}, /* mmc1_sdwp.gpio6_28 */ + {GPIO6_11, (M14 | PIN_INPUT_PULLUP)}, /* gpio6_11.gpio6_11 */ + {SPI1_SCLK, (M0 | PIN_INPUT_PULLDOWN)}, /* spi1_sclk.spi1_sclk */ + {SPI1_D1, (M0 | PIN_INPUT_PULLDOWN)}, /* spi1_d1.spi1_d1 */ + {SPI1_D0, (M0 | PIN_INPUT_PULLDOWN)}, /* spi1_d0.spi1_d0 */ + {SPI1_CS0, (M0 | PIN_INPUT_PULLUP)}, /* spi1_cs0.spi1_cs0 */ + {SPI1_CS1, (M14 | PIN_OUTPUT)}, /* spi1_cs1.gpio7_11 */ + {SPI1_CS2, (M14 | PIN_INPUT_PULLDOWN)}, /* spi1_cs2.gpio7_12 */ + {SPI1_CS3, (M6 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* spi1_cs3.hdmi1_cec */ + {SPI2_SCLK, (M1 | PIN_INPUT_PULLDOWN)}, /* spi2_sclk.uart3_rxd */ + {SPI2_D1, (M1 | PIN_INPUT_SLEW)}, /* spi2_d1.uart3_txd */ + {SPI2_D0, (M1 | PIN_INPUT_SLEW)}, /* spi2_d0.uart3_ctsn */ + {SPI2_CS0, (M1 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* spi2_cs0.uart3_rtsn */ + {DCAN1_TX, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* dcan1_tx.dcan1_tx */ + {DCAN1_RX, (M14 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* dcan1_rx.gpio1_15 */ + {UART1_RXD, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* uart1_rxd.uart1_rxd */ + {UART1_TXD, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* uart1_txd.uart1_txd */ + {UART1_CTSN, (M3 | PIN_INPUT_PULLUP)}, /* uart1_ctsn.mmc4_clk */ + {UART1_RTSN, (M3 | PIN_INPUT_PULLUP)}, /* uart1_rtsn.mmc4_cmd */ + {UART2_RXD, (M3 | PIN_INPUT_PULLUP)}, /* N/A.mmc4_dat0 */ + {UART2_TXD, (M3 | PIN_INPUT_PULLUP)}, /* uart2_txd.mmc4_dat1 */ + {UART2_CTSN, (M3 | PIN_INPUT_PULLUP)}, /* uart2_ctsn.mmc4_dat2 */ + {UART2_RTSN, (M3 | PIN_INPUT_PULLUP)}, /* uart2_rtsn.mmc4_dat3 */ + {I2C2_SDA, (M0 | PIN_INPUT_PULLUP)}, /* i2c2_sda.i2c2_sda */ + {I2C2_SCL, (M0 | PIN_INPUT_PULLUP)}, /* i2c2_scl.i2c2_scl */ + {WAKEUP0, (M1 | PIN_OUTPUT)}, /* Wakeup0.dcan1_rx */ + {WAKEUP2, (M14 | PIN_OUTPUT)}, /* Wakeup2.gpio1_2 */ +}; + +#ifdef CONFIG_IODELAY_RECALIBRATION +const struct iodelay_cfg_entry dra742_iodelay_cfg_array[] = { + {0x06F0, 480, 0}, /* CFG_RGMII0_RXC_IN */ + {0x06FC, 111, 1641}, /* CFG_RGMII0_RXCTL_IN */ + {0x0708, 272, 1116}, /* CFG_RGMII0_RXD0_IN */ + {0x0714, 243, 1260}, /* CFG_RGMII0_RXD1_IN */ + {0x0720, 0, 1614}, /* CFG_RGMII0_RXD2_IN */ + {0x072C, 105, 1673}, /* CFG_RGMII0_RXD3_IN */ + {0x0740, 0, 0}, /* CFG_RGMII0_TXC_OUT */ + {0x074C, 1560, 120}, /* CFG_RGMII0_TXCTL_OUT */ + {0x0758, 1570, 120}, /* CFG_RGMII0_TXD0_OUT */ + {0x0764, 1500, 120}, /* CFG_RGMII0_TXD1_OUT */ + {0x0770, 1775, 120}, /* CFG_RGMII0_TXD2_OUT */ + {0x077C, 1875, 120}, /* CFG_RGMII0_TXD3_OUT */ + {0x08D0, 0, 0}, /* CFG_VIN1A_CLK0_IN */ + {0x08DC, 2600, 0}, /* CFG_VIN1A_D0_IN */ + {0x08E8, 2652, 46}, /* CFG_VIN1A_D10_IN */ + {0x08F4, 2541, 0}, /* CFG_VIN1A_D11_IN */ + {0x0900, 2603, 574}, /* CFG_VIN1A_D12_IN */ + {0x090C, 2548, 443}, /* CFG_VIN1A_D13_IN */ + {0x0918, 2624, 598}, /* CFG_VIN1A_D14_IN */ + {0x0924, 2535, 1027}, /* CFG_VIN1A_D15_IN */ + {0x0930, 2526, 818}, /* CFG_VIN1A_D16_IN */ + {0x093C, 2623, 797}, /* CFG_VIN1A_D17_IN */ + {0x0948, 2578, 888}, /* CFG_VIN1A_D18_IN */ + {0x0954, 2574, 1008}, /* CFG_VIN1A_D19_IN */ + {0x0960, 2527, 123}, /* CFG_VIN1A_D1_IN */ + {0x096C, 2577, 737}, /* CFG_VIN1A_D20_IN */ + {0x0978, 2627, 616}, /* CFG_VIN1A_D21_IN */ + {0x0984, 2573, 777}, /* CFG_VIN1A_D22_IN */ + {0x0990, 2730, 67}, /* CFG_VIN1A_D23_IN */ + {0x099C, 2509, 303}, /* CFG_VIN1A_D2_IN */ + {0x09A8, 2494, 267}, /* CFG_VIN1A_D3_IN */ + {0x09B4, 2474, 0}, /* CFG_VIN1A_D4_IN */ + {0x09C0, 2556, 181}, /* CFG_VIN1A_D5_IN */ + {0x09CC, 2516, 195}, /* CFG_VIN1A_D6_IN */ + {0x09D8, 2589, 210}, /* CFG_VIN1A_D7_IN */ + {0x09E4, 2624, 75}, /* CFG_VIN1A_D8_IN */ + {0x09F0, 2704, 14}, /* CFG_VIN1A_D9_IN */ + {0x09FC, 2469, 55}, /* CFG_VIN1A_DE0_IN */ + {0x0A08, 2557, 264}, /* CFG_VIN1A_FLD0_IN */ + {0x0A14, 2465, 269}, /* CFG_VIN1A_HSYNC0_IN */ + {0x0A20, 2411, 348}, /* CFG_VIN1A_VSYNC0_IN */ + {0x0A70, 150, 0}, /* CFG_VIN2A_D12_OUT */ + {0x0A7C, 1500, 0}, /* CFG_VIN2A_D13_OUT */ + {0x0A88, 1600, 0}, /* CFG_VIN2A_D14_OUT */ + {0x0A94, 900, 0}, /* CFG_VIN2A_D15_OUT */ + {0x0AA0, 680, 0}, /* CFG_VIN2A_D16_OUT */ + {0x0AAC, 500, 0}, /* CFG_VIN2A_D17_OUT */ + {0x0AB0, 702, 0}, /* CFG_VIN2A_D18_IN */ + {0x0ABC, 136, 976}, /* CFG_VIN2A_D19_IN */ + {0x0AD4, 210, 1357}, /* CFG_VIN2A_D20_IN */ + {0x0AE0, 189, 1462}, /* CFG_VIN2A_D21_IN */ + {0x0AEC, 232, 1278}, /* CFG_VIN2A_D22_IN */ + {0x0AF8, 0, 1397}, /* CFG_VIN2A_D23_IN */ +}; +#endif + #endif /* _MUX_DATA_DRA7XX_H_ */ -- cgit v0.10.2 From 2cb3cccb8bfe93b4d862c82c41e0c9e7468e9c9b Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Thu, 4 Jun 2015 16:42:40 +0530 Subject: ARM: DRA7: CPSW: Remove IO delay hack Now all manual mode configurations are done as part of IO delay recalibration sequence, remove the hack done for CPSW. Signed-off-by: Lokesh Vutla diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index e844bfb..68c6d6d 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -216,27 +216,6 @@ struct s32ktimer { #define OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK (0x1 << 10) #define OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK (0x1f << 0) -/* IO Delay module defines */ -#define CFG_IO_DELAY_BASE 0x4844A000 -#define CFG_IO_DELAY_LOCK (CFG_IO_DELAY_BASE + 0x02C) - -/* CPSW IO Delay registers*/ -#define CFG_RGMII0_TXCTL (CFG_IO_DELAY_BASE + 0x74C) -#define CFG_RGMII0_TXD0 (CFG_IO_DELAY_BASE + 0x758) -#define CFG_RGMII0_TXD1 (CFG_IO_DELAY_BASE + 0x764) -#define CFG_RGMII0_TXD2 (CFG_IO_DELAY_BASE + 0x770) -#define CFG_RGMII0_TXD3 (CFG_IO_DELAY_BASE + 0x77C) -#define CFG_VIN2A_D13 (CFG_IO_DELAY_BASE + 0xA7C) -#define CFG_VIN2A_D17 (CFG_IO_DELAY_BASE + 0xAAC) -#define CFG_VIN2A_D16 (CFG_IO_DELAY_BASE + 0xAA0) -#define CFG_VIN2A_D15 (CFG_IO_DELAY_BASE + 0xA94) -#define CFG_VIN2A_D14 (CFG_IO_DELAY_BASE + 0xA88) - -#define CFG_IO_DELAY_UNLOCK_KEY 0x0000AAAA -#define CFG_IO_DELAY_LOCK_KEY 0x0000AAAB -#define CFG_IO_DELAY_ACCESS_PATTERN 0x00029000 -#define CFG_IO_DELAY_LOCK_MASK 0x400 - #ifndef __ASSEMBLY__ struct srcomp_params { s8 divide_factor; @@ -255,9 +234,5 @@ struct ctrl_ioregs { u32 ctrl_ddr_ctrl_ext_0; }; -struct io_delay { - u32 addr; - u32 dly; -}; #endif /* __ASSEMBLY__ */ #endif diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index 9941afa..94a1a8c 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -41,43 +41,6 @@ const struct omap_sysinfo sysinfo = { "Board: DRA7xx\n" }; -/* - * Adjust I/O delays on the Tx control and data lines of each MAC port. This - * is a workaround in order to work properly with the DP83865 PHYs on the EVM. - * In 3COM RGMII mode this PHY applies it's own internal clock delay, so we - * essentially need to counteract the DRA7xx internal delay, and we do this - * by delaying the control and data lines. If not using this PHY, you probably - * don't need to do this stuff! - */ -static void dra7xx_adj_io_delay(const struct io_delay *io_dly) -{ - int i = 0; - u32 reg_val; - u32 delta; - u32 coarse; - u32 fine; - - writel(CFG_IO_DELAY_UNLOCK_KEY, CFG_IO_DELAY_LOCK); - - while(io_dly[i].addr) { - writel(CFG_IO_DELAY_ACCESS_PATTERN & ~CFG_IO_DELAY_LOCK_MASK, - io_dly[i].addr); - delta = io_dly[i].dly; - reg_val = readl(io_dly[i].addr) & 0x3ff; - coarse = ((reg_val >> 5) & 0x1F) + ((delta >> 5) & 0x1F); - coarse = (coarse > 0x1F) ? (0x1F) : (coarse); - fine = (reg_val & 0x1F) + (delta & 0x1F); - fine = (fine > 0x1F) ? (0x1F) : (fine); - reg_val = CFG_IO_DELAY_ACCESS_PATTERN | - CFG_IO_DELAY_LOCK_MASK | - ((coarse << 5) | (fine)); - writel(reg_val, io_dly[i].addr); - i++; - } - - writel(CFG_IO_DELAY_LOCK_KEY, CFG_IO_DELAY_LOCK); -} - /** * @brief board_init * @@ -263,19 +226,6 @@ int spl_start_uboot(void) #endif #ifdef CONFIG_DRIVER_TI_CPSW - -/* Delay value to add to calibrated value */ -#define RGMII0_TXCTL_DLY_VAL ((0x3 << 5) + 0x8) -#define RGMII0_TXD0_DLY_VAL ((0x3 << 5) + 0x8) -#define RGMII0_TXD1_DLY_VAL ((0x3 << 5) + 0x2) -#define RGMII0_TXD2_DLY_VAL ((0x4 << 5) + 0x0) -#define RGMII0_TXD3_DLY_VAL ((0x4 << 5) + 0x0) -#define VIN2A_D13_DLY_VAL ((0x3 << 5) + 0x8) -#define VIN2A_D17_DLY_VAL ((0x3 << 5) + 0x8) -#define VIN2A_D16_DLY_VAL ((0x3 << 5) + 0x2) -#define VIN2A_D15_DLY_VAL ((0x4 << 5) + 0x0) -#define VIN2A_D14_DLY_VAL ((0x4 << 5) + 0x0) - extern u32 *const omap_si_rev; static void cpsw_control(int enabled) @@ -323,22 +273,6 @@ int board_eth_init(bd_t *bis) uint8_t mac_addr[6]; uint32_t mac_hi, mac_lo; uint32_t ctrl_val; - const struct io_delay io_dly[] = { - {CFG_RGMII0_TXCTL, RGMII0_TXCTL_DLY_VAL}, - {CFG_RGMII0_TXD0, RGMII0_TXD0_DLY_VAL}, - {CFG_RGMII0_TXD1, RGMII0_TXD1_DLY_VAL}, - {CFG_RGMII0_TXD2, RGMII0_TXD2_DLY_VAL}, - {CFG_RGMII0_TXD3, RGMII0_TXD3_DLY_VAL}, - {CFG_VIN2A_D13, VIN2A_D13_DLY_VAL}, - {CFG_VIN2A_D17, VIN2A_D17_DLY_VAL}, - {CFG_VIN2A_D16, VIN2A_D16_DLY_VAL}, - {CFG_VIN2A_D15, VIN2A_D15_DLY_VAL}, - {CFG_VIN2A_D14, VIN2A_D14_DLY_VAL}, - {0} - }; - - /* Adjust IO delay for RGMII tx path */ - dra7xx_adj_io_delay(io_dly); /* try reading mac address from efuse */ mac_lo = readl((*ctrl)->control_core_mac_id_0_lo); -- cgit v0.10.2 From f91e0c4c773c9faeabf2d66a6b9fca54bb1b5ee2 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Thu, 4 Jun 2015 16:42:41 +0530 Subject: ARM: BeagleBoard-x15: Enable IO delay recalibration sequence Enable IO delay recalibration sequence. Signed-off-by: Lokesh Vutla Signed-off-by: Nishanth Menon diff --git a/board/ti/beagle_x15/board.c b/board/ti/beagle_x15/board.c index 4ee02f2..b6c17ec 100644 --- a/board/ti/beagle_x15/board.c +++ b/board/ti/beagle_x15/board.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -264,11 +265,18 @@ int board_late_init(void) void set_muxconf_regs_essential(void) { do_set_mux32((*ctrl)->control_padconf_core_base, - core_padconf_array_essential, - sizeof(core_padconf_array_essential) / - sizeof(struct pad_conf_entry)); + early_padconf, ARRAY_SIZE(early_padconf)); } +#ifdef CONFIG_IODELAY_RECALIBRATION +void recalibrate_iodelay(void) +{ + __recalibrate_iodelay(core_padconf_array_essential, + ARRAY_SIZE(core_padconf_array_essential), + iodelay_cfg_array, ARRAY_SIZE(iodelay_cfg_array)); +} +#endif + #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) int board_mmc_init(bd_t *bis) { diff --git a/include/configs/beagle_x15.h b/include/configs/beagle_x15.h index 369f7b8..8d072c6 100644 --- a/include/configs/beagle_x15.h +++ b/include/configs/beagle_x15.h @@ -14,6 +14,10 @@ #define CONFIG_AM57XX +#ifdef CONFIG_SPL_BUILD +#define CONFIG_IODELAY_RECALIBRATION +#endif + #define CONFIG_NR_DRAM_BANKS 2 #define CONFIG_ENV_SIZE (64 << 10) -- cgit v0.10.2 From 8f6c80b96650e4acf1cf6555343a4df089cb36ff Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Thu, 4 Jun 2015 16:42:42 +0530 Subject: ARM: BeagleBoard-x15: Add mux data Adding the mux data, manual and virtual mode settings for BeagleBoard-X15. Signed-off-by: Lokesh Vutla Signed-off-by: Tomi Valkeinen Signed-off-by: Nishanth Menon Signed-off-by: Roger Quadros diff --git a/board/ti/beagle_x15/mux_data.h b/board/ti/beagle_x15/mux_data.h index df658c5..09d3650 100644 --- a/board/ti/beagle_x15/mux_data.h +++ b/board/ti/beagle_x15/mux_data.h @@ -13,43 +13,318 @@ #include const struct pad_conf_entry core_padconf_array_essential[] = { - {MMC1_CLK, (IEN | PTU | PDIS | M0)}, /* MMC1_CLK */ - {MMC1_CMD, (IEN | PTU | PDIS | M0)}, /* MMC1_CMD */ - {MMC1_DAT0, (IEN | PTU | PDIS | M0)}, /* MMC1_DAT0 */ - {MMC1_DAT1, (IEN | PTU | PDIS | M0)}, /* MMC1_DAT1 */ - {MMC1_DAT2, (IEN | PTU | PDIS | M0)}, /* MMC1_DAT2 */ - {MMC1_DAT3, (IEN | PTU | PDIS | M0)}, /* MMC1_DAT3 */ - {MMC1_SDCD, (FSC | IEN | PTU | PDIS | M0)}, /* MMC1_SDCD */ - {MMC1_SDWP, (FSC | IEN | PTD | PEN | M14)}, /* MMC1_SDWP */ - {GPMC_A19, (IEN | PTU | PDIS | M1)}, /* mmc2_dat4 */ - {GPMC_A20, (IEN | PTU | PDIS | M1)}, /* mmc2_dat5 */ - {GPMC_A21, (IEN | PTU | PDIS | M1)}, /* mmc2_dat6 */ - {GPMC_A22, (IEN | PTU | PDIS | M1)}, /* mmc2_dat7 */ - {GPMC_A23, (IEN | PTU | PDIS | M1)}, /* mmc2_clk */ - {GPMC_A24, (IEN | PTU | PDIS | M1)}, /* mmc2_dat0 */ - {GPMC_A25, (IEN | PTU | PDIS | M1)}, /* mmc2_dat1 */ - {GPMC_A26, (IEN | PTU | PDIS | M1)}, /* mmc2_dat2 */ - {GPMC_A27, (IEN | PTU | PDIS | M1)}, /* mmc2_dat3 */ - {GPMC_CS1, (IEN | PTU | PDIS | M1)}, /* mmm2_cmd */ - {UART2_CTSN, (FSC | IEN | PTU | PDIS | M2)}, /* uart2_ctsn.uart3_rxd */ - {UART2_RTSN, (FSC | IEN | PTU | PDIS | M1)}, /* uart2_rtsn.uart3_txd */ - {I2C1_SDA, (IEN | PTU | PDIS | M0)}, /* I2C1_SDA */ - {I2C1_SCL, (IEN | PTU | PDIS | M0)}, /* I2C1_SCL */ - {MDIO_MCLK, (PTU | PEN | M0)}, /* MDIO_MCLK */ - {MDIO_D, (IEN | PTU | PEN | M0)}, /* MDIO_D */ - {RGMII0_TXC, (M0) }, - {RGMII0_TXCTL, (M0) }, - {RGMII0_TXD3, (M0) }, - {RGMII0_TXD2, (M0) }, - {RGMII0_TXD1, (M0) }, - {RGMII0_TXD0, (M0) }, - {RGMII0_RXC, (IEN | M0) }, - {RGMII0_RXCTL, (IEN | M0) }, - {RGMII0_RXD3, (IEN | M0) }, - {RGMII0_RXD2, (IEN | M0) }, - {RGMII0_RXD1, (IEN | M0) }, - {RGMII0_RXD0, (IEN | M0) }, - {USB1_DRVVBUS, (M0 | FSC) }, - {SPI1_CS1, (PEN | IDIS | M14) }, /* GPIO7_11 */ + {GPMC_AD0, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad0.vin3a_d0 */ + {GPMC_AD1, (M2 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* gpmc_ad1.vin3a_d1 */ + {GPMC_AD2, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad2.vin3a_d2 */ + {GPMC_AD3, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad3.vin3a_d3 */ + {GPMC_AD4, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad4.vin3a_d4 */ + {GPMC_AD5, (M2 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* gpmc_ad5.vin3a_d5 */ + {GPMC_AD6, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad6.vin3a_d6 */ + {GPMC_AD7, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad7.vin3a_d7 */ + {GPMC_AD8, (M2 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* gpmc_ad8.vin3a_d8 */ + {GPMC_AD9, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad9.vin3a_d9 */ + {GPMC_AD10, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad10.vin3a_d10 */ + {GPMC_AD11, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad11.vin3a_d11 */ + {GPMC_AD12, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad12.vin3a_d12 */ + {GPMC_AD13, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad13.vin3a_d13 */ + {GPMC_AD14, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad14.vin3a_d14 */ + {GPMC_AD15, (M2 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* gpmc_ad15.vin3a_d15 */ + {GPMC_A0, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a0.vin3a_d16 */ + {GPMC_A1, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a1.vin3a_d17 */ + {GPMC_A2, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a2.vin3a_d18 */ + {GPMC_A3, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a3.vin3a_d19 */ + {GPMC_A4, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a4.vin3a_d20 */ + {GPMC_A5, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a5.vin3a_d21 */ + {GPMC_A6, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a6.vin3a_d22 */ + {GPMC_A7, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a7.vin3a_d23 */ + {GPMC_A8, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a8.vin3a_hsync0 */ + {GPMC_A9, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a9.vin3a_vsync0 */ + {GPMC_A10, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a10.vin3a_de0 */ + {GPMC_A11, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a11.vin3a_fld0 */ + {GPMC_A12, (M14 | PIN_INPUT_PULLUP)}, /* gpmc_a12.gpio2_2 */ + {GPMC_A13, (M14 | PIN_INPUT_PULLDOWN)}, /* gpmc_a13.gpio2_3 */ + {GPMC_A14, (M14 | PIN_INPUT_PULLUP)}, /* gpmc_a14.gpio2_4 */ + {GPMC_A15, (M14 | PIN_INPUT_PULLDOWN)}, /* gpmc_a15.gpio2_5 */ + {GPMC_A16, (M14 | PIN_INPUT_PULLDOWN)}, /* gpmc_a16.gpio2_6 */ + {GPMC_A17, (M14 | PIN_INPUT_PULLDOWN)}, /* gpmc_a17.gpio2_7 */ + {GPMC_A18, (M14 | PIN_INPUT_PULLUP)}, /* gpmc_a18.gpio2_8 */ + {GPMC_A19, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a19.mmc2_dat4 */ + {GPMC_A20, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a20.mmc2_dat5 */ + {GPMC_A21, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a21.mmc2_dat6 */ + {GPMC_A22, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a22.mmc2_dat7 */ + {GPMC_A23, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a23.mmc2_clk */ + {GPMC_A24, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a24.mmc2_dat0 */ + {GPMC_A25, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a25.mmc2_dat1 */ + {GPMC_A26, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a26.mmc2_dat2 */ + {GPMC_A27, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a27.mmc2_dat3 */ + {GPMC_CS1, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_cs1.mmc2_cmd */ + {GPMC_CS0, (M14 | PIN_INPUT_PULLDOWN)}, /* gpmc_cs0.gpio2_19 */ + {GPMC_CS2, (M14 | PIN_INPUT_PULLUP)}, /* gpmc_cs2.gpio2_20 */ + {GPMC_CS3, (M2 | PIN_INPUT_PULLDOWN)}, /* gpmc_cs3.vin3a_clk0 */ + {GPMC_CLK, (M9 | PIN_INPUT_PULLDOWN)}, /* gpmc_clk.dma_evt1 */ + {GPMC_ADVN_ALE, (M14 | PIN_INPUT_PULLUP)}, /* gpmc_advn_ale.gpio2_23 */ + {GPMC_OEN_REN, (M14 | PIN_INPUT_PULLUP)}, /* gpmc_oen_ren.gpio2_24 */ + {GPMC_WEN, (M14 | PIN_INPUT_PULLUP)}, /* gpmc_wen.gpio2_25 */ + {GPMC_BEN0, (M9 | PIN_INPUT_PULLDOWN)}, /* gpmc_ben0.dma_evt3 */ + {GPMC_BEN1, (M9 | PIN_INPUT_PULLDOWN)}, /* gpmc_ben1.dma_evt4 */ + {GPMC_WAIT0, (M14 | PIN_INPUT_PULLUP)}, /* gpmc_wait0.gpio2_28 */ + {VIN1B_CLK1, (M14 | PIN_INPUT_SLEW)}, /* vin1b_clk1.gpio2_31 */ + {VIN1A_D2, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d2.gpio3_6 */ + {VIN1A_D3, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d3.gpio3_7 */ + {VIN1A_D4, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d4.gpio3_8 */ + {VIN1A_D5, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d5.gpio3_9 */ + {VIN1A_D6, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d6.gpio3_10 */ + {VIN1A_D7, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d7.gpio3_11 */ + {VIN1A_D8, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d8.gpio3_12 */ + {VIN1A_D10, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d10.gpio3_14 */ + {VIN1A_D11, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d11.gpio3_15 */ + {VIN1A_D12, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d12.gpio3_16 */ + {VIN1A_D14, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d14.gpio3_18 */ + {VIN1A_D16, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d16.gpio3_20 */ + {VIN1A_D19, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d19.gpio3_23 */ + {VIN1A_D20, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d20.gpio3_24 */ + {VIN1A_D21, (M0 | PIN_INPUT_PULLDOWN)}, /* vin1a_d21.vin1a_d21 */ + {VIN1A_D22, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d22.gpio3_26 */ + {VIN2A_CLK0, (M14 | PIN_INPUT_PULLDOWN)}, /* vin2a_clk0.gpio3_28 */ + {VIN2A_DE0, (M14 | PIN_INPUT_PULLDOWN)}, /* vin2a_de0.gpio3_29 */ + {VIN2A_FLD0, (M14 | PIN_INPUT_PULLDOWN)}, /* vin2a_fld0.gpio3_30 */ + {VIN2A_HSYNC0, (M11 | PIN_INPUT_PULLDOWN)}, /* vin2a_hsync0.pr1_uart0_cts_n */ + {VIN2A_VSYNC0, (M11 | PIN_INPUT_PULLUP)}, /* vin2a_vsync0.pr1_uart0_rts_n */ + {VIN2A_D0, (M11 | PIN_INPUT_PULLDOWN)}, /* vin2a_d0.pr1_uart0_rxd */ + {VIN2A_D1, (M11 | PIN_INPUT_PULLDOWN)}, /* vin2a_d1.pr1_uart0_txd */ + {VIN2A_D2, (M8 | PIN_INPUT_PULLDOWN)}, /* vin2a_d2.uart10_rxd */ + {VIN2A_D3, (M8 | PIN_INPUT_PULLDOWN)}, /* vin2a_d3.uart10_txd */ + {VIN2A_D4, (M8 | PIN_INPUT_PULLDOWN)}, /* vin2a_d4.uart10_ctsn */ + {VIN2A_D5, (M8 | PIN_INPUT_PULLDOWN)}, /* vin2a_d5.uart10_rtsn */ + {VIN2A_D6, (M14 | PIN_INPUT_PULLDOWN)}, /* vin2a_d6.gpio4_7 */ + {VIN2A_D7, (M14 | PIN_INPUT_PULLDOWN)}, /* vin2a_d7.gpio4_8 */ + {VIN2A_D8, (M14 | PIN_INPUT_PULLDOWN)}, /* vin2a_d8.gpio4_9 */ + {VIN2A_D9, (M14 | PIN_INPUT_PULLDOWN)}, /* vin2a_d9.gpio4_10 */ + {VIN2A_D10, (M10 | PIN_INPUT_PULLDOWN)}, /* vin2a_d10.ehrpwm2B */ + {VIN2A_D11, (M10 | PIN_INPUT_PULLDOWN)}, /* vin2a_d11.ehrpwm2_tripzone_input */ + {VIN2A_D12, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d12.rgmii1_txc */ + {VIN2A_D13, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d13.rgmii1_txctl */ + {VIN2A_D14, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d14.rgmii1_txd3 */ + {VIN2A_D15, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d15.rgmii1_txd2 */ + {VIN2A_D16, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d16.rgmii1_txd1 */ + {VIN2A_D17, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d17.rgmii1_txd0 */ + {VIN2A_D18, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d18.rgmii1_rxc */ + {VIN2A_D19, (M3 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* vin2a_d19.rgmii1_rxctl */ + {VIN2A_D20, (M3 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* vin2a_d20.rgmii1_rxd3 */ + {VIN2A_D21, (M3 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* vin2a_d21.rgmii1_rxd2 */ + {VIN2A_D22, (M3 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* vin2a_d22.rgmii1_rxd1 */ + {VIN2A_D23, (M3 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* vin2a_d23.rgmii1_rxd0 */ + {VOUT1_CLK, (M0 | PIN_OUTPUT)}, /* vout1_clk.vout1_clk */ + {VOUT1_DE, (M0 | PIN_OUTPUT)}, /* vout1_de.vout1_de */ + {VOUT1_FLD, (M14 | PIN_INPUT)}, /* vout1_fld.gpio4_21 */ + {VOUT1_HSYNC, (M0 | PIN_OUTPUT)}, /* vout1_hsync.vout1_hsync */ + {VOUT1_VSYNC, (M0 | PIN_OUTPUT)}, /* vout1_vsync.vout1_vsync */ + {VOUT1_D0, (M0 | PIN_OUTPUT)}, /* vout1_d0.vout1_d0 */ + {VOUT1_D1, (M0 | PIN_OUTPUT)}, /* vout1_d1.vout1_d1 */ + {VOUT1_D2, (M0 | PIN_OUTPUT)}, /* vout1_d2.vout1_d2 */ + {VOUT1_D3, (M0 | PIN_OUTPUT)}, /* vout1_d3.vout1_d3 */ + {VOUT1_D4, (M0 | PIN_OUTPUT)}, /* vout1_d4.vout1_d4 */ + {VOUT1_D5, (M0 | PIN_OUTPUT)}, /* vout1_d5.vout1_d5 */ + {VOUT1_D6, (M0 | PIN_OUTPUT)}, /* vout1_d6.vout1_d6 */ + {VOUT1_D7, (M0 | PIN_OUTPUT)}, /* vout1_d7.vout1_d7 */ + {VOUT1_D8, (M0 | PIN_OUTPUT)}, /* vout1_d8.vout1_d8 */ + {VOUT1_D9, (M0 | PIN_OUTPUT)}, /* vout1_d9.vout1_d9 */ + {VOUT1_D10, (M0 | PIN_OUTPUT)}, /* vout1_d10.vout1_d10 */ + {VOUT1_D11, (M0 | PIN_OUTPUT)}, /* vout1_d11.vout1_d11 */ + {VOUT1_D12, (M0 | PIN_OUTPUT)}, /* vout1_d12.vout1_d12 */ + {VOUT1_D13, (M0 | PIN_OUTPUT)}, /* vout1_d13.vout1_d13 */ + {VOUT1_D14, (M0 | PIN_OUTPUT)}, /* vout1_d14.vout1_d14 */ + {VOUT1_D15, (M0 | PIN_OUTPUT)}, /* vout1_d15.vout1_d15 */ + {VOUT1_D16, (M0 | PIN_OUTPUT)}, /* vout1_d16.vout1_d16 */ + {VOUT1_D17, (M0 | PIN_OUTPUT)}, /* vout1_d17.vout1_d17 */ + {VOUT1_D18, (M0 | PIN_OUTPUT)}, /* vout1_d18.vout1_d18 */ + {VOUT1_D19, (M0 | PIN_OUTPUT)}, /* vout1_d19.vout1_d19 */ + {VOUT1_D20, (M0 | PIN_OUTPUT)}, /* vout1_d20.vout1_d20 */ + {VOUT1_D21, (M0 | PIN_OUTPUT)}, /* vout1_d21.vout1_d21 */ + {VOUT1_D22, (M0 | PIN_OUTPUT)}, /* vout1_d22.vout1_d22 */ + {VOUT1_D23, (M0 | PIN_OUTPUT)}, /* vout1_d23.vout1_d23 */ + {MDIO_MCLK, (M0 | PIN_INPUT_PULLUP)}, /* mdio_mclk.mdio_mclk */ + {MDIO_D, (M0 | PIN_INPUT_PULLUP)}, /* mdio_d.mdio_d */ + {RMII_MHZ_50_CLK, (M14 | PIN_INPUT_PULLUP)}, /* RMII_MHZ_50_CLK.gpio5_17 */ + {UART3_RXD, (M14 | PIN_INPUT_PULLDOWN)}, /* uart3_rxd.gpio5_18 */ + {UART3_TXD, (M14 | PIN_INPUT_PULLDOWN)}, /* uart3_txd.gpio5_19 */ + {RGMII0_TXC, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_txc.rgmii0_txc */ + {RGMII0_TXCTL, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_txctl.rgmii0_txctl */ + {RGMII0_TXD3, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_txd3.rgmii0_txd3 */ + {RGMII0_TXD2, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_txd2.rgmii0_txd2 */ + {RGMII0_TXD1, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_txd1.rgmii0_txd1 */ + {RGMII0_TXD0, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_txd0.rgmii0_txd0 */ + {RGMII0_RXC, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_rxc.rgmii0_rxc */ + {RGMII0_RXCTL, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_rxctl.rgmii0_rxctl */ + {RGMII0_RXD3, (M0 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* rgmii0_rxd3.rgmii0_rxd3 */ + {RGMII0_RXD2, (M0 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* rgmii0_rxd2.rgmii0_rxd2 */ + {RGMII0_RXD1, (M0 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* rgmii0_rxd1.rgmii0_rxd1 */ + {RGMII0_RXD0, (M0 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* rgmii0_rxd0.rgmii0_rxd0 */ + {USB1_DRVVBUS, (M0 | PIN_INPUT_SLEW)}, /* usb1_drvvbus.usb1_drvvbus */ + {USB2_DRVVBUS, (M0 | PIN_INPUT_SLEW)}, /* usb2_drvvbus.usb2_drvvbus */ + {GPIO6_14, (M10 | PIN_INPUT_PULLUP)}, /* gpio6_14.timer1 */ + {GPIO6_15, (M10 | PIN_INPUT_PULLUP)}, /* gpio6_15.timer2 */ + {GPIO6_16, (M10 | PIN_INPUT_PULLUP)}, /* gpio6_16.timer3 */ + {XREF_CLK0, (M9 | PIN_INPUT_PULLDOWN)}, /* xref_clk0.clkout2 */ + {XREF_CLK1, (M14 | PIN_INPUT_PULLDOWN)}, /* xref_clk1.gpio6_18 */ + {XREF_CLK2, (M14 | PIN_INPUT_PULLDOWN)}, /* xref_clk2.gpio6_19 */ + {XREF_CLK3, (M9 | PIN_INPUT_PULLDOWN)}, /* xref_clk3.clkout3 */ + {MCASP1_ACLKX, (M10 | PIN_INPUT_PULLUP)}, /* mcasp1_aclkx.i2c3_sda */ + {MCASP1_FSX, (M10 | PIN_INPUT_PULLUP)}, /* mcasp1_fsx.i2c3_scl */ + {MCASP1_ACLKR, (M10 | PIN_INPUT_PULLUP)}, /* mcasp1_aclkr.i2c4_sda */ + {MCASP1_FSR, (M10 | PIN_INPUT_PULLUP)}, /* mcasp1_fsr.i2c4_scl */ + {MCASP1_AXR0, (M10 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* mcasp1_axr0.i2c5_sda */ + {MCASP1_AXR1, (M10 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* mcasp1_axr1.i2c5_scl */ + {MCASP1_AXR2, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr2.gpio5_4 */ + {MCASP1_AXR3, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr3.gpio5_5 */ + {MCASP1_AXR4, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr4.gpio5_6 */ + {MCASP1_AXR5, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr5.gpio5_7 */ + {MCASP1_AXR6, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr6.gpio5_8 */ + {MCASP1_AXR7, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr7.gpio5_9 */ + {MCASP1_AXR8, (M14 | PIN_INPUT_SLEW)}, /* mcasp1_axr8.gpio5_10 */ + {MCASP1_AXR9, (M14 | PIN_INPUT_SLEW)}, /* mcasp1_axr9.gpio5_11 */ + {MCASP1_AXR10, (M14 | PIN_INPUT_SLEW)}, /* mcasp1_axr10.gpio5_12 */ + {MCASP1_AXR11, (M14 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* mcasp1_axr11.gpio4_17 */ + {MCASP1_AXR12, (M1 | PIN_INPUT_SLEW)}, /* mcasp1_axr12.mcasp7_axr0 */ + {MCASP1_AXR13, (M1 | PIN_INPUT_SLEW)}, /* mcasp1_axr13.mcasp7_axr1 */ + {MCASP1_AXR14, (M1 | PIN_INPUT_SLEW)}, /* mcasp1_axr14.mcasp7_aclkx */ + {MCASP1_AXR15, (M1 | PIN_INPUT_SLEW)}, /* mcasp1_axr15.mcasp7_fsx */ + {MCASP2_ACLKX, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_aclkx.mcasp2_aclkx */ + {MCASP2_FSX, (M0 | PIN_INPUT_SLEW)}, /* mcasp2_fsx.mcasp2_fsx */ + {MCASP2_ACLKR, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_aclkr.mcasp2_aclkr */ + {MCASP2_FSR, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_fsr.mcasp2_fsr */ + {MCASP2_AXR0, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr0.mcasp2_axr0 */ + {MCASP2_AXR1, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr1.mcasp2_axr1 */ + {MCASP2_AXR2, (M0 | PIN_INPUT_SLEW)}, /* mcasp2_axr2.mcasp2_axr2 */ + {MCASP2_AXR3, (M0 | PIN_INPUT_SLEW)}, /* mcasp2_axr3.mcasp2_axr3 */ + {MCASP2_AXR4, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr4.mcasp2_axr4 */ + {MCASP2_AXR5, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr5.mcasp2_axr5 */ + {MCASP2_AXR6, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr6.mcasp2_axr6 */ + {MCASP2_AXR7, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr7.mcasp2_axr7 */ + {MCASP3_ACLKX, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp3_aclkx.mcasp3_aclkx */ + {MCASP3_FSX, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp3_fsx.mcasp3_fsx */ + {MCASP3_AXR0, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp3_axr0.mcasp3_axr0 */ + {MCASP3_AXR1, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp3_axr1.mcasp3_axr1 */ + {MCASP4_ACLKX, (M3 | PIN_INPUT_PULLDOWN)}, /* mcasp4_aclkx.uart8_rxd */ + {MCASP4_FSX, (M3 | PIN_INPUT_PULLDOWN)}, /* mcasp4_fsx.uart8_txd */ + {MCASP4_AXR0, (M3 | PIN_INPUT_PULLDOWN)}, /* mcasp4_axr0.uart8_ctsn */ + {MCASP4_AXR1, (M3 | PIN_INPUT_PULLUP)}, /* mcasp4_axr1.uart8_rtsn */ + {MCASP5_ACLKX, (M3 | PIN_INPUT_PULLDOWN)}, /* mcasp5_aclkx.uart9_rxd */ + {MCASP5_FSX, (M3 | PIN_INPUT_PULLDOWN)}, /* mcasp5_fsx.uart9_txd */ + {MCASP5_AXR0, (M3 | PIN_INPUT_PULLDOWN)}, /* mcasp5_axr0.uart9_ctsn */ + {MCASP5_AXR1, (M3 | PIN_INPUT_PULLUP)}, /* mcasp5_axr1.uart9_rtsn */ + {MMC1_CLK, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_clk.mmc1_clk */ + {MMC1_CMD, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_cmd.mmc1_cmd */ + {MMC1_DAT0, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_dat0.mmc1_dat0 */ + {MMC1_DAT1, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_dat1.mmc1_dat1 */ + {MMC1_DAT2, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_dat2.mmc1_dat2 */ + {MMC1_DAT3, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_dat3.mmc1_dat3 */ + {MMC1_SDCD, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_sdcd.mmc1_sdcd */ + {MMC1_SDWP, (M14 | PIN_OUTPUT)}, /* mmc1_sdwp.gpio6_28 */ + {GPIO6_10, (M10 | PIN_INPUT_PULLDOWN)}, /* gpio6_10.ehrpwm2A */ + {GPIO6_11, (M14 | PIN_INPUT_PULLUP)}, /* gpio6_11.gpio6_11 */ + {MMC3_CLK, (M0 | PIN_INPUT_PULLUP)}, /* mmc3_clk.mmc3_clk */ + {MMC3_CMD, (M0 | PIN_INPUT_PULLUP)}, /* mmc3_cmd.mmc3_cmd */ + {MMC3_DAT0, (M0 | PIN_INPUT_PULLUP)}, /* mmc3_dat0.mmc3_dat0 */ + {MMC3_DAT1, (M0 | PIN_INPUT_PULLUP)}, /* mmc3_dat1.mmc3_dat1 */ + {MMC3_DAT2, (M0 | PIN_INPUT_PULLUP)}, /* mmc3_dat2.mmc3_dat2 */ + {MMC3_DAT3, (M0 | PIN_INPUT_PULLUP)}, /* mmc3_dat3.mmc3_dat3 */ + {MMC3_DAT4, (M1 | PIN_INPUT_PULLDOWN)}, /* mmc3_dat4.spi4_sclk */ + {MMC3_DAT5, (M1 | PIN_INPUT_PULLDOWN)}, /* mmc3_dat5.spi4_d1 */ + {MMC3_DAT6, (M1 | PIN_INPUT_PULLDOWN)}, /* mmc3_dat6.spi4_d0 */ + {MMC3_DAT7, (M1 | PIN_INPUT_PULLUP)}, /* mmc3_dat7.spi4_cs0 */ + {SPI1_SCLK, (M14 | PIN_INPUT_PULLDOWN)}, /* spi1_sclk.gpio7_7 */ + {SPI1_D1, (M14 | PIN_INPUT_PULLDOWN)}, /* spi1_d1.gpio7_8 */ + {SPI1_D0, (M14 | PIN_INPUT_PULLDOWN)}, /* spi1_d0.gpio7_9 */ + {SPI1_CS0, (M14 | PIN_OUTPUT)}, /* spi1_cs0.gpio7_10 */ + {SPI1_CS1, (M14 | PIN_OUTPUT_PULLUP)}, /* spi1_cs1.gpio7_11 */ + {SPI1_CS2, (M14 | PIN_INPUT_PULLDOWN)}, /* spi1_cs2.gpio7_12 */ + {SPI1_CS3, (M6 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* spi1_cs3.hdmi1_cec */ + {SPI2_SCLK, (M14 | PIN_INPUT_PULLDOWN)}, /* spi2_sclk.gpio7_14 */ + {SPI2_D1, (M14 | PIN_INPUT_PULLDOWN)}, /* spi2_d1.gpio7_15 */ + {SPI2_D0, (M14 | PIN_INPUT_PULLUP)}, /* spi2_d0.gpio7_16 */ + {SPI2_CS0, (M14 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* spi2_cs0.gpio7_17 */ + {DCAN1_TX, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* dcan1_tx.dcan1_tx */ + {DCAN1_RX, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* dcan1_rx.dcan1_rx */ + {UART1_RXD, (M0 | PIN_INPUT_SLEW)}, /* uart1_rxd.uart1_rxd */ + {UART1_TXD, (M0 | PIN_INPUT_SLEW)}, /* uart1_txd.uart1_txd */ + {UART1_CTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* uart1_ctsn.Driveroff */ + {UART2_RXD, (M15 | PIN_INPUT_PULLDOWN)}, /* N/A.Driveroff */ + {UART2_TXD, (M15 | PIN_INPUT_PULLDOWN)}, /* uart2_txd.Driveroff */ + {UART2_CTSN, (M2 | PIN_INPUT_SLEW)}, /* uart2_ctsn.uart3_rxd */ + {UART2_RTSN, (M1 | PIN_INPUT_SLEW)}, /* uart2_rtsn.uart3_txd */ + {I2C2_SDA, (M1 | PIN_INPUT)}, /* i2c2_sda.hdmi1_ddc_scl */ + {I2C2_SCL, (M1 | PIN_INPUT)}, /* i2c2_scl.hdmi1_ddc_sda */ + {WAKEUP0, (M0 | PIN_OUTPUT_PULLUP)}, /* Wakeup0.Wakeup0 */ + {WAKEUP1, (M0 | PIN_OUTPUT_PULLDOWN)}, /* Wakeup1.Wakeup1 */ + {WAKEUP2, (M0 | PIN_OUTPUT_PULLDOWN)}, /* Wakeup2.Wakeup2 */ + {WAKEUP3, (M0 | PIN_OUTPUT_PULLUP)}, /* Wakeup3.Wakeup3 */ + {ON_OFF, (M1 | PIN_OUTPUT_PULLUP)}, /* on_off.on_off */ + {RTC_PORZ, (M0 | PIN_OUTPUT_PULLDOWN)}, /* rtc_porz.rtc_porz */ + {RTCK, (M0 | PIN_INPUT_PULLDOWN)}, /* rtck.rtck */ }; + +const struct pad_conf_entry early_padconf[] = { + {UART2_CTSN, (M2 | PIN_INPUT_SLEW)}, /* uart2_ctsn.uart3_rxd */ + {UART2_RTSN, (M1 | PIN_INPUT_SLEW)}, /* uart2_rtsn.uart3_txd */ + {I2C1_SDA, (PIN_INPUT_PULLUP | M0)}, /* I2C1_SDA */ + {I2C1_SCL, (PIN_INPUT_PULLUP | M0)}, /* I2C1_SCL */ +}; + +#ifdef CONFIG_IODELAY_RECALIBRATION +const struct iodelay_cfg_entry iodelay_cfg_array[] = { + {0x0114, 2980, 0}, /* CFG_GPMC_A0_IN */ + {0x0120, 2648, 0}, /* CFG_GPMC_A10_IN */ + {0x012C, 2918, 0}, /* CFG_GPMC_A11_IN */ + {0x0198, 2917, 0}, /* CFG_GPMC_A1_IN */ + {0x0204, 3156, 178}, /* CFG_GPMC_A2_IN */ + {0x0210, 3109, 246}, /* CFG_GPMC_A3_IN */ + {0x021C, 3142, 100}, /* CFG_GPMC_A4_IN */ + {0x0228, 3084, 33}, /* CFG_GPMC_A5_IN */ + {0x0234, 2778, 0}, /* CFG_GPMC_A6_IN */ + {0x0240, 3110, 0}, /* CFG_GPMC_A7_IN */ + {0x024C, 2874, 0}, /* CFG_GPMC_A8_IN */ + {0x0258, 3072, 0}, /* CFG_GPMC_A9_IN */ + {0x0264, 2466, 0}, /* CFG_GPMC_AD0_IN */ + {0x0270, 2523, 0}, /* CFG_GPMC_AD10_IN */ + {0x027C, 2453, 0}, /* CFG_GPMC_AD11_IN */ + {0x0288, 2285, 0}, /* CFG_GPMC_AD12_IN */ + {0x0294, 2206, 0}, /* CFG_GPMC_AD13_IN */ + {0x02A0, 1898, 0}, /* CFG_GPMC_AD14_IN */ + {0x02AC, 2473, 0}, /* CFG_GPMC_AD15_IN */ + {0x02B8, 2307, 0}, /* CFG_GPMC_AD1_IN */ + {0x02C4, 2691, 0}, /* CFG_GPMC_AD2_IN */ + {0x02D0, 2384, 0}, /* CFG_GPMC_AD3_IN */ + {0x02DC, 2462, 0}, /* CFG_GPMC_AD4_IN */ + {0x02E8, 2335, 0}, /* CFG_GPMC_AD5_IN */ + {0x02F4, 2370, 0}, /* CFG_GPMC_AD6_IN */ + {0x0300, 2389, 0}, /* CFG_GPMC_AD7_IN */ + {0x030C, 2672, 0}, /* CFG_GPMC_AD8_IN */ + {0x0318, 2334, 0}, /* CFG_GPMC_AD9_IN */ + {0x06F0, 480, 0}, /* CFG_RGMII0_RXC_IN */ + {0x06FC, 111, 1641}, /* CFG_RGMII0_RXCTL_IN */ + {0x0708, 272, 1116}, /* CFG_RGMII0_RXD0_IN */ + {0x0714, 243, 1260}, /* CFG_RGMII0_RXD1_IN */ + {0x0720, 0, 1614}, /* CFG_RGMII0_RXD2_IN */ + {0x072C, 105, 1673}, /* CFG_RGMII0_RXD3_IN */ + {0x0740, 531, 120}, /* CFG_RGMII0_TXC_OUT */ + {0x074C, 11, 60}, /* CFG_RGMII0_TXCTL_OUT */ + {0x0758, 7, 120}, /* CFG_RGMII0_TXD0_OUT */ + {0x0764, 0, 0}, /* CFG_RGMII0_TXD1_OUT */ + {0x0770, 276, 120}, /* CFG_RGMII0_TXD2_OUT */ + {0x077C, 440, 120}, /* CFG_RGMII0_TXD3_OUT */ + {0x0A70, 1551, 115}, /* CFG_VIN2A_D12_OUT */ + {0x0A7C, 816, 0}, /* CFG_VIN2A_D13_OUT */ + {0x0A88, 876, 0}, /* CFG_VIN2A_D14_OUT */ + {0x0A94, 312, 0}, /* CFG_VIN2A_D15_OUT */ + {0x0AA0, 58, 0}, /* CFG_VIN2A_D16_OUT */ + {0x0AAC, 0, 0}, /* CFG_VIN2A_D17_OUT */ + {0x0AB0, 702, 0}, /* CFG_VIN2A_D18_IN */ + {0x0ABC, 136, 976}, /* CFG_VIN2A_D19_IN */ + {0x0AD4, 210, 1357}, /* CFG_VIN2A_D20_IN */ + {0x0AE0, 189, 1462}, /* CFG_VIN2A_D21_IN */ + {0x0AEC, 232, 1278}, /* CFG_VIN2A_D22_IN */ + {0x0AF8, 0, 1397}, /* CFG_VIN2A_D23_IN */ +}; +#endif #endif /* _MUX_DATA_BEAGLE_X15_H_ */ -- cgit v0.10.2 From 083ffd65cb46e76a0db95403f894dbfcde2daca8 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Fri, 5 Jun 2015 00:58:42 +0100 Subject: ARM: highbank: add missing SCU register setup for reset Andre: assign names to the magic values Signed-off-by: Rob Herring Signed-off-by: Andre Przywara diff --git a/board/highbank/highbank.c b/board/highbank/highbank.c index ba1beb5..ba254b6 100644 --- a/board/highbank/highbank.c +++ b/board/highbank/highbank.c @@ -14,6 +14,7 @@ #define HB_AHCI_BASE 0xffe08000 +#define HB_SCU_A9_PWR_STATUS 0xfff10008 #define HB_SREG_A9_PWR_REQ 0xfff3cf00 #define HB_SREG_A9_BOOT_SRC_STAT 0xfff3cf04 #define HB_SREG_A9_PWRDOM_STAT 0xfff3cf20 @@ -27,6 +28,10 @@ #define PWRDOM_STAT_PCI 0x40000000 #define PWRDOM_STAT_EMMC 0x20000000 +#define HB_SCU_A9_PWR_NORMAL 0 +#define HB_SCU_A9_PWR_DORMANT 2 +#define HB_SCU_A9_PWR_OFF 3 + DECLARE_GLOBAL_DATA_PTR; /* @@ -114,6 +119,7 @@ int ft_board_setup(void *fdt, bd_t *bd) void reset_cpu(ulong addr) { writel(HB_PWR_HARD_RESET, HB_SREG_A9_PWR_REQ); + writeb(HB_SCU_A9_PWR_OFF, HB_SCU_A9_PWR_STATUS); wfi(); } -- cgit v0.10.2 From f8973325d08c6d391ed37bb48b2cf2e1d2f8b444 Mon Sep 17 00:00:00 2001 From: Mark Langsdorf Date: Fri, 5 Jun 2015 00:58:43 +0100 Subject: ARM: highbank: add reset support for Calxeda Midway machine The Calxeda Midway part has A15 cores, which do not have the Highbank A9's SCU used there for resetting the chip. Add code to distinguish between the A9 and the A15 and invoke the appropriate register writes to support the newer part. Andre: rework detection of Highbank vs. Midway Rob: fix Andre's reworked detection Signed-off-by: Mark Langsdorf Signed-off-by: Andre Przywara Signed-off-by: Rob Herring diff --git a/board/highbank/highbank.c b/board/highbank/highbank.c index ba254b6..e8132b8 100644 --- a/board/highbank/highbank.c +++ b/board/highbank/highbank.c @@ -18,6 +18,7 @@ #define HB_SREG_A9_PWR_REQ 0xfff3cf00 #define HB_SREG_A9_BOOT_SRC_STAT 0xfff3cf04 #define HB_SREG_A9_PWRDOM_STAT 0xfff3cf20 +#define HB_SREG_A15_PWR_CTRL 0xfff3c200 #define HB_PWR_SUSPEND 0 #define HB_PWR_SOFT_RESET 1 @@ -116,10 +117,22 @@ int ft_board_setup(void *fdt, bd_t *bd) } #endif +static int is_highbank(void) +{ + uint32_t midr; + + asm volatile ("mrc p15, 0, %0, c0, c0, 0\n" : "=r"(midr)); + + return (midr & 0xfff0) == 0xc090; +} + void reset_cpu(ulong addr) { writel(HB_PWR_HARD_RESET, HB_SREG_A9_PWR_REQ); - writeb(HB_SCU_A9_PWR_OFF, HB_SCU_A9_PWR_STATUS); + if (is_highbank()) + writeb(HB_SCU_A9_PWR_OFF, HB_SCU_A9_PWR_STATUS); + else + writel(0x1, HB_SREG_A15_PWR_CTRL); wfi(); } -- cgit v0.10.2 From 35df89319901f948a9d32d1114004414346e507f Mon Sep 17 00:00:00 2001 From: Mark Langsdorf Date: Fri, 5 Jun 2015 00:58:44 +0100 Subject: cmd_scsi: use lbaint_t for LBA values instead of u32 Signed-off-by: Mark Langsdorf Signed-off-by: Andre Przywara diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c index f80f549..fe705b6 100644 --- a/common/cmd_scsi.c +++ b/common/cmd_scsi.c @@ -54,10 +54,10 @@ static block_dev_desc_t scsi_dev_desc[CONFIG_SYS_SCSI_MAX_DEVICE]; * forward declerations of some Setup Routines */ void scsi_setup_test_unit_ready(ccb * pccb); -void scsi_setup_read6(ccb * pccb, unsigned long start, unsigned short blocks); -void scsi_setup_read_ext(ccb * pccb, unsigned long start, unsigned short blocks); -static void scsi_setup_write_ext(ccb *pccb, unsigned long start, - unsigned short blocks); +void scsi_setup_read6(ccb * pccb, lbaint_t start, unsigned short blocks); +void scsi_setup_read_ext(ccb * pccb, lbaint_t start, unsigned short blocks); +static void scsi_setup_write_ext(ccb *pccb, lbaint_t start, + unsigned short blocks); void scsi_setup_inquiry(ccb * pccb); void scsi_ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len); @@ -579,7 +579,7 @@ void scsi_setup_test_unit_ready(ccb * pccb) pccb->msgout[0]=SCSI_IDENTIFY; /* NOT USED */ } -void scsi_setup_read_ext(ccb * pccb, unsigned long start, unsigned short blocks) +void scsi_setup_read_ext(ccb * pccb, lbaint_t start, unsigned short blocks) { pccb->cmd[0]=SCSI_READ10; pccb->cmd[1]=pccb->lun<<5; @@ -599,7 +599,7 @@ void scsi_setup_read_ext(ccb * pccb, unsigned long start, unsigned short blocks) pccb->cmd[7],pccb->cmd[8]); } -void scsi_setup_write_ext(ccb *pccb, unsigned long start, unsigned short blocks) +void scsi_setup_write_ext(ccb *pccb, lbaint_t start, unsigned short blocks) { pccb->cmd[0] = SCSI_WRITE10; pccb->cmd[1] = pccb->lun << 5; @@ -620,7 +620,7 @@ void scsi_setup_write_ext(ccb *pccb, unsigned long start, unsigned short blocks) pccb->cmd[7], pccb->cmd[8]); } -void scsi_setup_read6(ccb * pccb, unsigned long start, unsigned short blocks) +void scsi_setup_read6(ccb * pccb, lbaint_t start, unsigned short blocks) { pccb->cmd[0]=SCSI_READ6; pccb->cmd[1]=pccb->lun<<5 | (((unsigned char)(start>>16))&0x1f); -- cgit v0.10.2 From 2b42c9317db730170ba8e1eb1c0417955c6e68bb Mon Sep 17 00:00:00 2001 From: Mark Langsdorf Date: Fri, 5 Jun 2015 00:58:45 +0100 Subject: ahci: support LBA48 data reads for 2+TB drives Enable full 48-bit LBA48 data reads by passing the upper word of the LBA block pointer in bytes 9 and 10 of the FIS. This allows uboot to load data from any arbitrary sector on a drive with 2 or more TB of available data connected to an AHCI controller. Signed-off-by: Mark Langsdorf Signed-off-by: Andre Przywara [trini: Make use of CONFIG_SYS_64BIT_LBA in a few places to drop warnings on platforms that don't enable that feature ] Signed-off-by: Tom Rini diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c index fe705b6..aaca3e8 100644 --- a/common/cmd_scsi.c +++ b/common/cmd_scsi.c @@ -56,6 +56,8 @@ static block_dev_desc_t scsi_dev_desc[CONFIG_SYS_SCSI_MAX_DEVICE]; void scsi_setup_test_unit_ready(ccb * pccb); void scsi_setup_read6(ccb * pccb, lbaint_t start, unsigned short blocks); void scsi_setup_read_ext(ccb * pccb, lbaint_t start, unsigned short blocks); +void scsi_setup_read16(ccb * pccb, lbaint_t start, unsigned long blocks); + static void scsi_setup_write_ext(ccb *pccb, lbaint_t start, unsigned short blocks); void scsi_setup_inquiry(ccb * pccb); @@ -357,7 +359,9 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) * scsi_read */ -#define SCSI_MAX_READ_BLK 0xFFFF /* almost the maximum amount of the scsi_ext command.. */ +/* almost the maximum amount of the scsi_ext command.. */ +#define SCSI_MAX_READ_BLK 0xFFFF +#define SCSI_LBA48_READ 0xFFFFFFF static ulong scsi_read(int device, lbaint_t blknr, lbaint_t blkcnt, void *buffer) @@ -379,7 +383,17 @@ static ulong scsi_read(int device, lbaint_t blknr, lbaint_t blkcnt, device, start, blks, (unsigned long)buffer); do { pccb->pdata=(unsigned char *)buf_addr; - if(blks>SCSI_MAX_READ_BLK) { +#ifdef CONFIG_SYS_64BIT_LBA + if (start > SCSI_LBA48_READ) { + unsigned long blocks; + blocks = min_t(lbaint_t, blks, SCSI_MAX_READ_BLK); + pccb->datalen = scsi_dev_desc[device].blksz * blocks; + scsi_setup_read16(pccb, start, blocks); + start += blocks; + blks -= blocks; + } else +#endif + if (blks > SCSI_MAX_READ_BLK) { pccb->datalen=scsi_dev_desc[device].blksz * SCSI_MAX_READ_BLK; smallblks=SCSI_MAX_READ_BLK; scsi_setup_read_ext(pccb,start,smallblks); @@ -579,6 +593,37 @@ void scsi_setup_test_unit_ready(ccb * pccb) pccb->msgout[0]=SCSI_IDENTIFY; /* NOT USED */ } +#ifdef CONFIG_SYS_64BIT_LBA +void scsi_setup_read16(ccb * pccb, lbaint_t start, unsigned long blocks) +{ + pccb->cmd[0] = SCSI_READ16; + pccb->cmd[1] = pccb->lun<<5; + pccb->cmd[2] = ((unsigned char) (start >> 56)) & 0xff; + pccb->cmd[3] = ((unsigned char) (start >> 48)) & 0xff; + pccb->cmd[4] = ((unsigned char) (start >> 40)) & 0xff; + pccb->cmd[5] = ((unsigned char) (start >> 32)) & 0xff; + pccb->cmd[6] = ((unsigned char) (start >> 24)) & 0xff; + pccb->cmd[7] = ((unsigned char) (start >> 16)) & 0xff; + pccb->cmd[8] = ((unsigned char) (start >> 8)) & 0xff; + pccb->cmd[9] = ((unsigned char) (start)) & 0xff; + pccb->cmd[10] = 0; + pccb->cmd[11] = ((unsigned char) (blocks >> 24)) & 0xff; + pccb->cmd[12] = ((unsigned char) (blocks >> 16)) & 0xff; + pccb->cmd[13] = ((unsigned char) (blocks >> 8)) & 0xff; + pccb->cmd[14] = (unsigned char) blocks & 0xff; + pccb->cmd[15] = 0; + pccb->cmdlen = 16; + pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ + debug ("scsi_setup_read16: cmd: %02X %02X " + "startblk %02X%02X%02X%02X%02X%02X%02X%02X " + "blccnt %02X%02X%02X%02X\n", + pccb->cmd[0], pccb->cmd[1], + pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5], + pccb->cmd[6], pccb->cmd[7], pccb->cmd[8], pccb->cmd[9], + pccb->cmd[11], pccb->cmd[12], pccb->cmd[13], pccb->cmd[14]); +} +#endif + void scsi_setup_read_ext(ccb * pccb, lbaint_t start, unsigned short blocks) { pccb->cmd[0]=SCSI_READ10; diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c index 6508648..fe667a0 100644 --- a/drivers/block/ahci.c +++ b/drivers/block/ahci.c @@ -726,18 +726,25 @@ static int ata_scsiop_inquiry(ccb *pccb) */ static int ata_scsiop_read_write(ccb *pccb, u8 is_write) { - u32 lba = 0; + lbaint_t lba = 0; u16 blocks = 0; u8 fis[20]; u8 *user_buffer = pccb->pdata; u32 user_buffer_size = pccb->datalen; /* Retrieve the base LBA number from the ccb structure. */ - memcpy(&lba, pccb->cmd + 2, sizeof(lba)); - lba = be32_to_cpu(lba); + if (pccb->cmd[0] == SCSI_READ16) { + memcpy(&lba, pccb->cmd + 2, 8); + lba = be64_to_cpu(lba); + } else { + u32 temp; + memcpy(&temp, pccb->cmd + 2, 4); + lba = be32_to_cpu(temp); + } /* - * And the number of blocks. + * Retrieve the base LBA number and the block count from + * the ccb structure. * * For 10-byte and 16-byte SCSI R/W commands, transfer * length 0 means transfer 0 block of data. @@ -746,10 +753,13 @@ static int ata_scsiop_read_write(ccb *pccb, u8 is_write) * * WARNING: one or two older ATA drives treat 0 as 0... */ - blocks = (((u16)pccb->cmd[7]) << 8) | ((u16) pccb->cmd[8]); + if (pccb->cmd[0] == SCSI_READ16) + blocks = (((u16)pccb->cmd[13]) << 8) | ((u16) pccb->cmd[14]); + else + blocks = (((u16)pccb->cmd[7]) << 8) | ((u16) pccb->cmd[8]); - debug("scsi_ahci: %s %d blocks starting from lba 0x%x\n", - is_write ? "write" : "read", (unsigned)lba, blocks); + debug("scsi_ahci: %s %u blocks starting from lba 0x" LBAFU "\n", + is_write ? "write" : "read", blocks, lba); /* Preset the FIS */ memset(fis, 0, sizeof(fis)); @@ -770,14 +780,23 @@ static int ata_scsiop_read_write(ccb *pccb, u8 is_write) return -EIO; } - /* LBA48 SATA command but only use 32bit address range within - * that. The next smaller command range (28bit) is too small. + /* + * LBA48 SATA command but only use 32bit address range within + * that (unless we've enabled 64bit LBA support). The next + * smaller command range (28bit) is too small. */ fis[4] = (lba >> 0) & 0xff; fis[5] = (lba >> 8) & 0xff; fis[6] = (lba >> 16) & 0xff; fis[7] = 1 << 6; /* device reg: set LBA mode */ fis[8] = ((lba >> 24) & 0xff); +#ifdef CONFIG_SYS_64BIT_LBA + if (pccb->cmd[0] == SCSI_READ16) { + fis[9] = ((lba >> 32) & 0xff); + fis[10] = ((lba >> 40) & 0xff); + } +#endif + fis[3] = 0xe0; /* features */ /* Block (sector) count */ @@ -883,6 +902,7 @@ int scsi_exec(ccb *pccb) int ret; switch (pccb->cmd[0]) { + case SCSI_READ16: case SCSI_READ10: ret = ata_scsiop_read_write(pccb, 0); break; diff --git a/include/scsi.h b/include/scsi.h index 73de7b7..7e37591 100644 --- a/include/scsi.h +++ b/include/scsi.h @@ -132,6 +132,7 @@ typedef struct SCSI_cmd_block{ #define SCSI_MED_REMOVL 0x1E /* Prevent/Allow medium Removal (O) */ #define SCSI_READ6 0x08 /* Read 6-byte (MANDATORY) */ #define SCSI_READ10 0x28 /* Read 10-byte (MANDATORY) */ +#define SCSI_READ16 0x48 #define SCSI_RD_CAPAC 0x25 /* Read Capacity (MANDATORY) */ #define SCSI_RD_CAPAC10 SCSI_RD_CAPAC /* Read Capacity (10) */ #define SCSI_RD_CAPAC16 0x9e /* Read Capacity (16) */ -- cgit v0.10.2 From f8b009e8b783519023ab4ee0bfff59c0eef3ffdd Mon Sep 17 00:00:00 2001 From: Mark Langsdorf Date: Fri, 5 Jun 2015 00:58:46 +0100 Subject: ahci: extend data io wait to 10s The AHCI driver currently waits 5s before timing out when sending a data command to a drive. Some drives take upwards of 8s to respond to the initial data command while they're spinning up. Increase the data io timeout to 10s so that those drives can be found on initial scsi scan. Signed-off-by: Mark Langsdorf Signed-off-by: Andre Przywara diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c index fe667a0..4fb846a 100644 --- a/drivers/block/ahci.c +++ b/drivers/block/ahci.c @@ -39,7 +39,7 @@ u16 *ataid[AHCI_MAX_PORTS]; /* Maximum timeouts for each event */ #define WAIT_MS_SPINUP 20000 -#define WAIT_MS_DATAIO 5000 +#define WAIT_MS_DATAIO 10000 #define WAIT_MS_FLUSH 5000 #define WAIT_MS_LINKUP 200 -- cgit v0.10.2 From a0aad12346b2cc848b8d592067ca74cb6a1721f8 Mon Sep 17 00:00:00 2001 From: Kevin Smith Date: Mon, 16 Mar 2015 14:58:21 +0000 Subject: tools/kwbimage.c: Correct header size for SPI boot If defined, the macro CONFIG_SYS_SPI_U_BOOT_OFFS allows a board to specify the offset of the payload image into the kwb image file. This value was being used to locate the image, but was not used in the "header size" field of the main header. Move the use of this macro into the function that returns the header size so that the same value is used in all places. Signed-off-by: Kevin Smith Tested-by: Stefan Roese diff --git a/tools/kwbimage.c b/tools/kwbimage.c index 9540e7e..1ff17ca 100644 --- a/tools/kwbimage.c +++ b/tools/kwbimage.c @@ -420,6 +420,18 @@ static size_t image_headersz_v1(struct image_tool_params *params, *hasext = 1; } +#if defined(CONFIG_SYS_SPI_U_BOOT_OFFS) + if (headersz > CONFIG_SYS_SPI_U_BOOT_OFFS) { + fprintf(stderr, "Error: Image header (incl. SPL image) too big!\n"); + fprintf(stderr, "header=0x%x CONFIG_SYS_SPI_U_BOOT_OFFS=0x%x!\n", + (int)headersz, CONFIG_SYS_SPI_U_BOOT_OFFS); + fprintf(stderr, "Increase CONFIG_SYS_SPI_U_BOOT_OFFS!\n"); + return 0; + } else { + headersz = CONFIG_SYS_SPI_U_BOOT_OFFS; + } +#endif + /* * The payload should be aligned on some reasonable * boundary @@ -869,16 +881,6 @@ static int kwbimage_generate(struct image_tool_params *params, sizeof(struct ext_hdr_v0); } else { alloc_len = image_headersz_v1(params, NULL); -#if defined(CONFIG_SYS_SPI_U_BOOT_OFFS) - if (alloc_len > CONFIG_SYS_SPI_U_BOOT_OFFS) { - fprintf(stderr, "Error: Image header (incl. SPL image) too big!\n"); - fprintf(stderr, "header=0x%x CONFIG_SYS_SPI_U_BOOT_OFFS=0x%x!\n", - alloc_len, CONFIG_SYS_SPI_U_BOOT_OFFS); - fprintf(stderr, "Increase CONFIG_SYS_SPI_U_BOOT_OFFS!\n"); - } else { - alloc_len = CONFIG_SYS_SPI_U_BOOT_OFFS; - } -#endif } hdr = malloc(alloc_len); -- cgit v0.10.2 From 5730360efc153aefaddb980287a3b3c8eab26351 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 18 May 2015 16:09:43 +0000 Subject: arm: mvebu: Disable L2 cache before enabling d-cache L2 cache may still be enabled by the BootROM. We need to first disable it before enabling d-cache support. Signed-off-by: Stefan Roese Tested-by: Kevin Smith diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c index 04681fc..417fc35 100644 --- a/arch/arm/mach-mvebu/cpu.c +++ b/arch/arm/mach-mvebu/cpu.c @@ -7,6 +7,7 @@ #include #include #include +#include #include #include @@ -240,6 +241,13 @@ int cpu_eth_init(bd_t *bis) #ifndef CONFIG_SYS_DCACHE_OFF void enable_caches(void) { + struct pl310_regs *const pl310 = + (struct pl310_regs *)CONFIG_SYS_PL310_BASE; + + /* First disable L2 cache - may still be enable from BootROM */ + if (mvebu_soc_family() == MVEBU_SOC_A38X) + clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN); + /* Avoid problem with e.g. neta ethernet driver */ invalidate_dcache_all(); -- cgit v0.10.2 From e1b078e06c8be4c1991132fdc4cb8ca996ab2c4c Mon Sep 17 00:00:00 2001 From: Kevin Smith Date: Mon, 18 May 2015 16:09:44 +0000 Subject: arm: mvebu: Update CBAR with SOC regs base SMP-enabled Linux kernels read the CBAR register in CP15 to find the address of the SCU registers. After remapping internal registers, also update the CBAR so the kernel can find them. Signed-off-by: Kevin Smith Acked-by: Stefan Roese diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c index 417fc35..0121db8 100644 --- a/arch/arm/mach-mvebu/cpu.c +++ b/arch/arm/mach-mvebu/cpu.c @@ -161,10 +161,17 @@ static void update_sdram_window_sizes(void) } #ifdef CONFIG_ARCH_CPU_INIT +static void set_cbar(u32 addr) +{ + asm("mcr p15, 4, %0, c15, c0" : : "r" (addr)); +} + + int arch_cpu_init(void) { /* Linux expects the internal registers to be at 0xf1000000 */ writel(SOC_REGS_PHY_BASE, INTREG_BASE_ADDR_REG); + set_cbar(SOC_REGS_PHY_BASE + 0xC000); /* * We need to call mvebu_mbus_probe() before calling -- cgit v0.10.2 From 1c0df9ef6ed03baf6fd325dac546290f80c7fd09 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 29 May 2015 13:25:04 +0200 Subject: tools/kwboot: Add parameters to set delay and timeout via cmdline To support the Armada 38x, new values for the request-delay and the response-timeout are needed. As the values already implemented in this tool (for Kirkwood and Armada XP) don't seem to work here. To make this more flexible, lets add make those 2 parameters configurable via the cmdline. Here the new parameters: -q : use specific request-delay -s : use specific response-timeout For the Marvell DB-88F6820 these values are known to work: One board: -q 2 -s 1 2nd board: -q 5 -s 5 So this seems to be even board specific. But with this patch now those values can be specified and tested via the cmdline. Signed-off-by: Stefan Roese Cc: Kevin Smith Cc: Dirk Eibach Cc: Luka Perkov diff --git a/tools/kwboot.c b/tools/kwboot.c index 1368b4c..af7a6ee 100644 --- a/tools/kwboot.c +++ b/tools/kwboot.c @@ -657,7 +657,7 @@ static void kwboot_usage(FILE *stream, char *progname) { fprintf(stream, - "Usage: %s [-d | -a | -b | -D ] [ -t ] [-B ] \n", + "Usage: %s [-d | -a | -q | -s | -b | -D ] [ -t ] [-B ] \n", progname); fprintf(stream, "\n"); fprintf(stream, @@ -667,6 +667,8 @@ kwboot_usage(FILE *stream, char *progname) " -D : boot without preamble (Dove)\n"); fprintf(stream, " -d: enter debug mode\n"); fprintf(stream, " -a: use timings for Armada XP\n"); + fprintf(stream, " -q : use specific request-delay\n"); + fprintf(stream, " -s : use specific response-timeout\n"); fprintf(stream, "\n"); fprintf(stream, " -t: mini terminal\n"); fprintf(stream, "\n"); @@ -699,7 +701,7 @@ main(int argc, char **argv) kwboot_verbose = isatty(STDOUT_FILENO); do { - int c = getopt(argc, argv, "hb:ptaB:dD:"); + int c = getopt(argc, argv, "hb:ptaB:dD:q:s:"); if (c < 0) break; @@ -731,6 +733,14 @@ main(int argc, char **argv) msg_rsp_timeo = KWBOOT_MSG_RSP_TIMEO_AXP; break; + case 'q': + msg_req_delay = atoi(optarg); + break; + + case 's': + msg_rsp_timeo = atoi(optarg); + break; + case 'B': speed = kwboot_tty_speed(atoi(optarg)); if (speed == -1) -- cgit v0.10.2 From ef51c416bc582f39ceab17ee7632039355091189 Mon Sep 17 00:00:00 2001 From: Mark Langsdorf Date: Fri, 5 Jun 2015 00:58:49 +0100 Subject: highbank: add custom ahci_link_up function The Calxeda highbank SOC needs a custom sequence to bring up SATA links, so override ahci_link_up with custom function to handle combophy setup. Signed-off-by: Mark Langsdorf Signed-off-by: Richard Gibbs Signed-off-by: Rob Herring Signed-off-by: Andre Przywara diff --git a/board/highbank/Makefile b/board/highbank/Makefile index d3eb232..ce7ee68 100644 --- a/board/highbank/Makefile +++ b/board/highbank/Makefile @@ -5,4 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y := highbank.o +obj-y := highbank.o ahci.o diff --git a/board/highbank/ahci.c b/board/highbank/ahci.c new file mode 100644 index 0000000..0015323 --- /dev/null +++ b/board/highbank/ahci.c @@ -0,0 +1,218 @@ +/* + * Copyright 2012 Calxeda, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include +#include +#include + +#define CPHY_MAP(dev, addr) ((((dev) & 0x1f) << 7) | (((addr) >> 9) & 0x7f)) +#define CPHY_ADDR(base, dev, addr) ((base) | (((addr) & 0x1ff) << 2)) +#define CPHY_BASE 0xfff58000 +#define CPHY_WIDTH 0x1000 +#define CPHY_DTE_XS 5 +#define CPHY_MII 31 +#define SERDES_CR_CTL 0x80a0 +#define SERDES_CR_ADDR 0x80a1 +#define SERDES_CR_DATA 0x80a2 +#define CR_BUSY 0x0001 +#define CR_START 0x0001 +#define CR_WR_RDN 0x0002 +#define CPHY_TX_INPUT_STS 0x2001 +#define CPHY_RX_INPUT_STS 0x2002 +#define CPHY_SATA_TX_OVERRIDE_BIT 0x8000 +#define CPHY_SATA_RX_OVERRIDE_BIT 0x4000 +#define CPHY_TX_INPUT_OVERRIDE 0x2004 +#define CPHY_RX_INPUT_OVERRIDE 0x2005 +#define SPHY_LANE 0x100 +#define SPHY_HALF_RATE 0x0001 +#define CPHY_SATA_DPLL_MODE 0x0700 +#define CPHY_SATA_DPLL_SHIFT 8 +#define CPHY_SATA_TX_ATTEN 0x1c00 +#define CPHY_SATA_TX_ATTEN_SHIFT 10 + +#define HB_SREG_SATA_ATTEN 0xfff3cf24 + +#define SATA_PORT_BASE 0xffe08000 +#define SATA_VERSIONR 0xf8 +#define SATA_HB_VERSION 0x3332302a + +static u32 __combo_phy_reg_read(u8 phy, u8 dev, u32 addr) +{ + u32 data; + writel(CPHY_MAP(dev, addr), CPHY_BASE + 0x800 + CPHY_WIDTH * phy); + data = readl(CPHY_ADDR(CPHY_BASE + CPHY_WIDTH * phy, dev, addr)); + return data; +} + +static void __combo_phy_reg_write(u8 phy, u8 dev, u32 addr, u32 data) +{ + writel(CPHY_MAP(dev, addr), CPHY_BASE + 0x800 + CPHY_WIDTH * phy); + writel(data, CPHY_ADDR(CPHY_BASE + CPHY_WIDTH * phy, dev, addr)); +} + +static u32 combo_phy_read(u8 phy, u32 addr) +{ + u8 dev = CPHY_DTE_XS; + if (phy == 5) + dev = CPHY_MII; + while (__combo_phy_reg_read(phy, dev, SERDES_CR_CTL) & CR_BUSY) + udelay(5); + __combo_phy_reg_write(phy, dev, SERDES_CR_ADDR, addr); + __combo_phy_reg_write(phy, dev, SERDES_CR_CTL, CR_START); + while (__combo_phy_reg_read(phy, dev, SERDES_CR_CTL) & CR_BUSY) + udelay(5); + return __combo_phy_reg_read(phy, dev, SERDES_CR_DATA); +} + +static void combo_phy_write(u8 phy, u32 addr, u32 data) +{ + u8 dev = CPHY_DTE_XS; + if (phy == 5) + dev = CPHY_MII; + while (__combo_phy_reg_read(phy, dev, SERDES_CR_CTL) & CR_BUSY) + udelay(5); + __combo_phy_reg_write(phy, dev, SERDES_CR_ADDR, addr); + __combo_phy_reg_write(phy, dev, SERDES_CR_DATA, data); + __combo_phy_reg_write(phy, dev, SERDES_CR_CTL, CR_WR_RDN | CR_START); +} + +static void cphy_spread_spectrum_override(u8 phy, u8 lane, u32 val) +{ + u32 tmp; + tmp = combo_phy_read(phy, CPHY_RX_INPUT_STS + lane * SPHY_LANE); + tmp &= ~CPHY_SATA_RX_OVERRIDE_BIT; + combo_phy_write(phy, CPHY_RX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp); + + tmp |= CPHY_SATA_RX_OVERRIDE_BIT; + combo_phy_write(phy, CPHY_RX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp); + + tmp &= ~CPHY_SATA_DPLL_MODE; + tmp |= (val << CPHY_SATA_DPLL_SHIFT) & CPHY_SATA_DPLL_MODE; + combo_phy_write(phy, CPHY_RX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp); +} + +static void cphy_tx_attenuation_override(u8 phy, u8 lane) +{ + u32 val; + u32 tmp; + u8 shift; + + shift = ((phy == 5) ? 4 : lane) * 4; + + val = (readl(HB_SREG_SATA_ATTEN) >> shift) & 0xf; + + if (val & 0x8) + return; + + tmp = combo_phy_read(phy, CPHY_TX_INPUT_STS + lane * SPHY_LANE); + tmp &= ~CPHY_SATA_TX_OVERRIDE_BIT; + combo_phy_write(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp); + + tmp |= CPHY_SATA_TX_OVERRIDE_BIT; + combo_phy_write(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp); + + tmp |= (val << CPHY_SATA_TX_ATTEN_SHIFT) & CPHY_SATA_TX_ATTEN; + combo_phy_write(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp); +} + +static void cphy_disable_port_overrides(u8 port) +{ + u32 tmp; + u8 lane = 0, phy = 0; + + if (port == 0) + phy = 5; + else if (port < 5) + lane = port - 1; + else + return; + tmp = combo_phy_read(phy, CPHY_RX_INPUT_STS + lane * SPHY_LANE); + tmp &= ~CPHY_SATA_RX_OVERRIDE_BIT; + combo_phy_write(phy, CPHY_RX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp); + + tmp = combo_phy_read(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE); + tmp &= ~CPHY_SATA_TX_OVERRIDE_BIT; + combo_phy_write(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp); +} + +void cphy_disable_overrides(void) +{ + int i; + u32 port_map; + + port_map = readl(0xffe08000 + HOST_PORTS_IMPL); + for (i = 0; i < 5; i++) { + if (port_map & (1 << i)) + cphy_disable_port_overrides(i); + } +} + +static void cphy_override_lane(u8 port) +{ + u32 tmp, k = 0; + u8 lane = 0, phy = 0; + + if (port == 0) + phy = 5; + else if (port < 5) + lane = port - 1; + else + return; + + do { + tmp = combo_phy_read(0, CPHY_RX_INPUT_STS + + lane * SPHY_LANE); + } while ((tmp & SPHY_HALF_RATE) && (k++ < 1000)); + cphy_spread_spectrum_override(phy, lane, 3); + cphy_tx_attenuation_override(phy, lane); +} + +#define WAIT_MS_LINKUP 4 + +int ahci_link_up(struct ahci_probe_ent *probe_ent, int port) +{ + u32 tmp; + int j = 0; + u8 *port_mmio = (u8 *)probe_ent->port[port].port_mmio; + u32 is_highbank = readl(SATA_PORT_BASE + SATA_VERSIONR) == + SATA_HB_VERSION ? 1 : 0; + + /* Bring up SATA link. + * SATA link bringup time is usually less than 1 ms; only very + * rarely has it taken between 1-2 ms. Never seen it above 2 ms. + */ + while (j < WAIT_MS_LINKUP) { + if (is_highbank && (j == 0)) { + cphy_disable_port_overrides(port); + writel(0x301, port_mmio + PORT_SCR_CTL); + udelay(1000); + writel(0x300, port_mmio + PORT_SCR_CTL); + udelay(1000); + cphy_override_lane(port); + } + + tmp = readl(port_mmio + PORT_SCR_STAT); + if ((tmp & 0xf) == 0x3) + return 0; + udelay(1000); + j++; + + if ((j == WAIT_MS_LINKUP) && (tmp & 0xf)) + j = 0; /* retry phy reset */ + } + return 1; +} diff --git a/board/highbank/highbank.c b/board/highbank/highbank.c index e8132b8..469ee8e 100644 --- a/board/highbank/highbank.c +++ b/board/highbank/highbank.c @@ -35,6 +35,8 @@ DECLARE_GLOBAL_DATA_PTR; +void cphy_disable_overrides(void); + /* * Miscellaneous platform dependent initialisations */ @@ -62,6 +64,7 @@ void scsi_init(void) { u32 reg = readl(HB_SREG_A9_PWRDOM_STAT); + cphy_disable_overrides(); if (reg & PWRDOM_STAT_SATA) { ahci_init((void __iomem *)HB_AHCI_BASE); scsi_scan(1); @@ -136,3 +139,12 @@ void reset_cpu(ulong addr) wfi(); } + +/* + * turn off the override before transferring control to Linux, since Linux + * may not support spread spectrum. + */ +void arch_preboot_os(void) +{ + cphy_disable_overrides(); +} -- cgit v0.10.2 From ab16817cfbd921b910649def3d9abeee2984b17f Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Fri, 5 Jun 2015 11:09:02 +0300 Subject: configs: am43xx_evm: Enable NAND AM43xx EVMs have NAND so enable it. Signed-off-by: Roger Quadros Reviewed-by: Tom Rini diff --git a/configs/am43xx_evm_defconfig b/configs/am43xx_evm_defconfig index 4ad2667..29a3892 100644 --- a/configs/am43xx_evm_defconfig +++ b/configs/am43xx_evm_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y CONFIG_TARGET_AM43XX_EVM=y CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" +CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" CONFIG_CMD_NET=y -- cgit v0.10.2 From 9ddef489c4c11dc54dc4896f75a877c8944dedad Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Fri, 5 Jun 2015 12:42:20 +0300 Subject: am335x_evm: am44xx_evm: dra7xx_evm: nand: Fix file-system partition name We almost always use UBIFS for user accessible NAND file systems and the UBIFS file system might contain more than one volume within the single NAND partition. The last NAND partition is therefore more appropriately named as "NAND.file-system" instead of "NAND.rootfs" The Linux kernel (as of v3.16) also uses "NAND.file-system" to name the last NAND partition. This patch makes the partition name consistent between u-boot and the kernel. Signed-off-by: Roger Quadros Reviewed-by: Tom Rini diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 8da3325..1c6cbd7 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -248,7 +248,7 @@ "128k(NAND.u-boot-env)," \ "128k(NAND.u-boot-env.backup1)," \ "8m(NAND.kernel)," \ - "-(NAND.rootfs)" + "-(NAND.file-system)" #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000 #undef CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_IS_IN_NAND diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index d4f4c23..482a99a 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -378,7 +378,7 @@ "256k(NAND.u-boot-env)," \ "256k(NAND.u-boot-env.backup1)," \ "7m(NAND.kernel)," \ - "-(NAND.rootfs)" + "-(NAND.file-system)" #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00180000 /* NAND: SPL related configs */ #ifdef CONFIG_SPL_NAND_SUPPORT diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index afcc36b..edd51a2 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -252,7 +252,7 @@ "128k(NAND.u-boot-env)," \ "128k(NAND.u-boot-env.backup1)," \ "8m(NAND.kernel)," \ - "-(NAND.rootfs)" + "-(NAND.file-system)" #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000 /* NAND: SPL related configs */ #ifdef CONFIG_SPL_NAND_SUPPORT -- cgit v0.10.2 From cda6017629bb82f7a3b9a4718764e2217c3df4d8 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Fri, 5 Jun 2015 12:42:21 +0300 Subject: am335x_evm: nand: Fix boot from NAND Use the correct partition names from with the Device Tree blob and the kernel is picked up. Also use partition name instead of number for the root filesystem in the kernel boot arguments. Signed-off-by: Roger Quadros Reviewed-by: Tom Rini diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 1c6cbd7..a5f1f06 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -54,12 +54,12 @@ "${optargs} " \ "root=${nandroot} " \ "rootfstype=${nandrootfstype}\0" \ - "nandroot=ubi0:rootfs rw ubi.mtd=9,2048\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \ "nandrootfstype=ubifs rootwait=1\0" \ "nandboot=echo Booting from nand ...; " \ "run nandargs; " \ - "nand read ${fdtaddr} u-boot-spl-os; " \ - "nand read ${loadaddr} kernel; " \ + "nand read ${fdtaddr} NAND.u-boot-spl-os; " \ + "nand read ${loadaddr} NAND.kernel; " \ "bootz ${loadaddr} - ${fdtaddr}\0" #else #define NANDARGS "" -- cgit v0.10.2 From 0ad5eaa4e5a6527001e1a6edd97b0e580e4c6247 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 5 Jun 2015 12:43:46 +0300 Subject: am43xx_evm: Enable NAND boot Enable booting from NAND on the am437xx-evm. Signed-off-by: Tom Rini Signed-off-by: Roger Quadros Reviewed-by: Tom Rini diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 482a99a..fce34fa2 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -295,13 +295,15 @@ "setenv fdtfile am437x-idk-evm.dtb; fi; " \ "if test $fdtfile = undefined; then " \ "echo WARNING: Could not determine device tree; fi; \0" \ + NANDARGS \ NETARGS \ DFUARGS \ #define CONFIG_BOOTCOMMAND \ "run findfdt; " \ "run mmcboot;" \ - "run usbboot;" + "run usbboot;" \ + NANDBOOT \ #endif @@ -390,6 +392,24 @@ #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00300000 /* kernel offset */ #define CONFIG_CMD_SPL_WRITE_SIZE CONFIG_SYS_NAND_BLOCK_SIZE #endif -#endif /* !CONFIG_NAND */ +#define NANDARGS \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "nandargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,4096\0" \ + "nandrootfstype=ubifs rootwait=1\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${fdtaddr} NAND.u-boot-spl-os; " \ + "nand read ${loadaddr} NAND.kernel; " \ + "bootz ${loadaddr} - ${fdtaddr}\0" +#define NANDBOOT "run nandboot; " +#else /* !CONFIG_NAND */ +#define NANDARGS +#define NANDBOOT +#endif /* CONFIG_NAND */ #endif /* __CONFIG_AM43XX_EVM_H */ -- cgit v0.10.2 From 37be54fd1351a177c061c2c351ffdd53efaebb59 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Fri, 5 Jun 2015 15:19:21 +0530 Subject: ARM: BeagleBoard-x15: Enable i2c5 clocks On AM57xx evm I2C5 is used to detect the LCD board by reading the EEPROM present on the bus. Enable i2c5 clocks to help that. Signed-off-by: Lokesh Vutla Reviewed-by: Tom Rini diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c index bfdf1e0..f1a59a3 100644 --- a/arch/arm/cpu/armv7/omap5/hw_data.c +++ b/arch/arm/cpu/armv7/omap5/hw_data.c @@ -534,6 +534,9 @@ void enable_basic_clocks(void) void enable_basic_uboot_clocks(void) { u32 const clk_domains_essential[] = { +#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) + (*prcm)->cm_ipu_clkstctrl, +#endif 0 }; @@ -547,7 +550,11 @@ void enable_basic_uboot_clocks(void) (*prcm)->cm_l4per_i2c2_clkctrl, (*prcm)->cm_l4per_i2c3_clkctrl, (*prcm)->cm_l4per_i2c4_clkctrl, +#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) + (*prcm)->cm_ipu_i2c5_clkctrl, +#else (*prcm)->cm_l4per_i2c5_clkctrl, +#endif (*prcm)->cm_l3init_hsusbhost_clkctrl, (*prcm)->cm_l3init_fsusb_clkctrl, 0 diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c index 0547037..cd51fe7 100644 --- a/arch/arm/cpu/armv7/omap5/prcm-regs.c +++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c @@ -817,6 +817,10 @@ struct prcm_regs const dra7xx_prcm = { .cm_dsp_clkstctrl = 0x4a005400, .cm_dsp_dsp_clkctrl = 0x4a005420, + /* cm IPU */ + .cm_ipu_clkstctrl = 0x4a005540, + .cm_ipu_i2c5_clkctrl = 0x4a005578, + /* prm irqstatus regs */ .prm_irqstatus_mpu_2 = 0x4ae06014, diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 12c2207..5469435 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -345,6 +345,10 @@ struct prcm_regs { /* GMAC Clk Ctrl */ u32 cm_gmac_gmac_clkctrl; u32 cm_gmac_clkstctrl; + + /* IPU */ + u32 cm_ipu_clkstctrl; + u32 cm_ipu_i2c5_clkctrl; }; struct omap_sys_ctrl_regs { -- cgit v0.10.2 From 7c352cd38d0ad7a25f98592182704667dfde37a8 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 5 Jun 2015 15:51:11 +0530 Subject: am33xx: Re-enable SW levelling for DDR2 The recent changes for hw leveling on am33xx were not intended for DDR2 boards, only DDR3. Update emif_sdram_type to take a sdram_config value to check against. This lets us pass in the value we would use to configure, when we have not yet configured the board yet. In other cases update the call to be as functional as before and check an already programmed value in. Tested-by: Yan Liu Signed-off-by: Tom Rini Signed-off-by: Lokesh Vutla diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/cpu/armv7/am33xx/ddr.c index f5b16b4..b3fb0c4 100644 --- a/arch/arm/cpu/armv7/am33xx/ddr.c +++ b/arch/arm/cpu/armv7/am33xx/ddr.c @@ -123,30 +123,33 @@ void config_sdram_emif4d5(const struct emif_regs *regs, int nr) writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl); writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw); - /* Perform hardware leveling. */ - udelay(1000); - writel(readl(&emif_reg[nr]->emif_ddr_ext_phy_ctrl_36) | - 0x100, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_36); - writel(readl(&emif_reg[nr]->emif_ddr_ext_phy_ctrl_36_shdw) | - 0x100, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_36_shdw); - - writel(0x80000000, &emif_reg[nr]->emif_rd_wr_lvl_rmp_ctl); - - /* Enable read leveling */ - writel(0x80000000, &emif_reg[nr]->emif_rd_wr_lvl_ctl); - - /* - * Enable full read and write leveling. Wait for read and write - * leveling bit to clear RDWRLVLFULL_START bit 31 - */ - while((readl(&emif_reg[nr]->emif_rd_wr_lvl_ctl) & 0x80000000) != 0) - ; - - /* Check the timeout register to see if leveling is complete */ - if((readl(&emif_reg[nr]->emif_status) & 0x70) != 0) - puts("DDR3 H/W leveling incomplete with errors\n"); - - if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2) { + /* Perform hardware leveling for DDR3 */ + if (emif_sdram_type(regs->sdram_config) == EMIF_SDRAM_TYPE_DDR3) { + udelay(1000); + writel(readl(&emif_reg[nr]->emif_ddr_ext_phy_ctrl_36) | + 0x100, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_36); + writel(readl(&emif_reg[nr]->emif_ddr_ext_phy_ctrl_36_shdw) | + 0x100, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_36_shdw); + + writel(0x80000000, &emif_reg[nr]->emif_rd_wr_lvl_rmp_ctl); + + /* Enable read leveling */ + writel(0x80000000, &emif_reg[nr]->emif_rd_wr_lvl_ctl); + + /* + * Enable full read and write leveling. Wait for read and write + * leveling bit to clear RDWRLVLFULL_START bit 31 + */ + while ((readl(&emif_reg[nr]->emif_rd_wr_lvl_ctl) & 0x80000000) + != 0) + ; + + /* Check the timeout register to see if leveling is complete */ + if ((readl(&emif_reg[nr]->emif_status) & 0x70) != 0) + puts("DDR3 H/W leveling incomplete with errors\n"); + + } else { + /* DDR2 */ configure_mr(nr, 0); configure_mr(nr, 1); } @@ -183,9 +186,49 @@ void set_sdram_timings(const struct emif_regs *regs, int nr) } /* + * Configure EXT PHY registers for software leveling + */ +static void ext_phy_settings_swlvl(const struct emif_regs *regs, int nr) +{ + u32 *ext_phy_ctrl_base = 0; + u32 *emif_ext_phy_ctrl_base = 0; + __maybe_unused const u32 *ext_phy_ctrl_const_regs; + u32 i = 0; + __maybe_unused u32 size; + + ext_phy_ctrl_base = (u32 *)&(regs->emif_ddr_ext_phy_ctrl_1); + emif_ext_phy_ctrl_base = + (u32 *)&(emif_reg[nr]->emif_ddr_ext_phy_ctrl_1); + + /* Configure external phy control timing registers */ + for (i = 0; i < EMIF_EXT_PHY_CTRL_TIMING_REG; i++) { + writel(*ext_phy_ctrl_base, emif_ext_phy_ctrl_base++); + /* Update shadow registers */ + writel(*ext_phy_ctrl_base++, emif_ext_phy_ctrl_base++); + } + +#ifdef CONFIG_AM43XX + /* + * External phy 6-24 registers do not change with ddr frequency. + * These only need to be set on DDR2 on AM43xx. + */ + emif_get_ext_phy_ctrl_const_regs(&ext_phy_ctrl_const_regs, &size); + + if (!size) + return; + + for (i = 0; i < size; i++) { + writel(ext_phy_ctrl_const_regs[i], emif_ext_phy_ctrl_base++); + /* Update shadow registers */ + writel(ext_phy_ctrl_const_regs[i], emif_ext_phy_ctrl_base++); + } +#endif +} + +/* * Configure EXT PHY registers for hardware leveling */ -static void ext_phy_settings(const struct emif_regs *regs, int nr) +static void ext_phy_settings_hwlvl(const struct emif_regs *regs, int nr) { /* * Enable hardware leveling on the EMIF. For details about these @@ -256,8 +299,12 @@ void config_ddr_phy(const struct emif_regs *regs, int nr) writel(regs->emif_ddr_phy_ctlr_1, &emif_reg[nr]->emif_ddr_phy_ctrl_1_shdw); - if (get_emif_rev((u32)emif_reg[nr]) == EMIF_4D5) - ext_phy_settings(regs, nr); + if (get_emif_rev((u32)emif_reg[nr]) == EMIF_4D5) { + if (emif_sdram_type(regs->sdram_config) == EMIF_SDRAM_TYPE_DDR3) + ext_phy_settings_hwlvl(regs, nr); + else + ext_phy_settings_swlvl(regs, nr); + } } /** diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c index 9cf816c..27fa3fb 100644 --- a/arch/arm/cpu/armv7/am33xx/emif4.c +++ b/arch/arm/cpu/armv7/am33xx/emif4.c @@ -124,8 +124,9 @@ void config_ddr(unsigned int pll, const struct ctrl_ioregs *ioregs, /* Set CKE to be controlled by EMIF/DDR PHY */ writel(DDR_CKE_CTRL_NORMAL, &ddrctrl->ddrckectrl); - /* Allow EMIF to control DDR_RESET */ - writel(0x00000000, &ddrctrl->ddrioctrl); + if (emif_sdram_type(regs->sdram_config) == EMIF_SDRAM_TYPE_DDR3) + /* Allow EMIF to control DDR_RESET */ + writel(0x00000000, &ddrctrl->ddrioctrl); #endif /* Program EMIF instance */ diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c index fa04bbe..c94a807 100644 --- a/arch/arm/cpu/armv7/omap-common/clocks-common.c +++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c @@ -372,6 +372,7 @@ static void setup_dplls(void) { u32 temp; const struct dpll_params *params; + struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE; debug("setup_dplls\n"); @@ -382,7 +383,8 @@ static void setup_dplls(void) * Core DPLL will be locked after setting up EMIF * using the FREQ_UPDATE method(freq_update_core()) */ - if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2) + if (emif_sdram_type(readl(&emif->emif_sdram_config)) == + EMIF_SDRAM_TYPE_LPDDR2) do_setup_dpll((*prcm)->cm_clkmode_dpll_core, params, DPLL_NO_LOCK, "core"); else diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c index 3ee4695..ca22c00 100644 --- a/arch/arm/cpu/armv7/omap-common/emif-common.c +++ b/arch/arm/cpu/armv7/omap-common/emif-common.c @@ -1171,12 +1171,14 @@ static void do_sdram_init(u32 base) * OPP to another) */ if (!(in_sdram || warm_reset())) { - if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2) + if (emif_sdram_type(regs->sdram_config) == + EMIF_SDRAM_TYPE_LPDDR2) lpddr2_init(base, regs); else ddr3_init(base, regs); } - if (warm_reset() && (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3)) { + if (warm_reset() && (emif_sdram_type(regs->sdram_config) == + EMIF_SDRAM_TYPE_DDR3)) { set_lpmode_selfrefresh(base); emif_reset_phy(base); omap5_ddr3_leveling(base, regs); @@ -1398,7 +1400,8 @@ static void do_bug0039_workaround(u32 base) void sdram_init(void) { u32 in_sdram, size_prog, size_detect; - u32 sdram_type = emif_sdram_type(); + struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE; + u32 sdram_type = emif_sdram_type(emif->emif_sdram_config); debug(">>sdram_init()\n"); diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c index 222540f..39f8d0d 100644 --- a/arch/arm/cpu/armv7/omap5/hwinit.c +++ b/arch/arm/cpu/armv7/omap5/hwinit.c @@ -122,6 +122,7 @@ static void io_settings_ddr3(void) void do_io_settings(void) { u32 io_settings = 0, mask = 0; + struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE; /* Impedance settings EMMC, C2C 1,2, hsi2 */ mask = (ds_mask << 2) | (ds_mask << 8) | @@ -177,7 +178,7 @@ void do_io_settings(void) (sc_fast << 17) | (sc_fast << 14); writel(io_settings, (*ctrl)->control_smart3io_padconf_1); - if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2) + if (emif_sdram_type(emif->emif_sdram_config) == EMIF_SDRAM_TYPE_LPDDR2) io_settings_lpddr2(); else io_settings_ddr3(); diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h index a97d2fd..7986e6e 100644 --- a/arch/arm/include/asm/emif.h +++ b/arch/arm/include/asm/emif.h @@ -1209,12 +1209,10 @@ static inline u32 get_emif_rev(u32 base) * which is typically the case. So it is sufficient to get * SDRAM type from EMIF1. */ -static inline u32 emif_sdram_type(void) +static inline u32 emif_sdram_type(u32 sdram_config) { - struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE; - - return (readl(&emif->emif_sdram_config) & - EMIF_REG_SDRAM_TYPE_MASK) >> EMIF_REG_SDRAM_TYPE_SHIFT; + return (sdram_config & EMIF_REG_SDRAM_TYPE_MASK) + >> EMIF_REG_SDRAM_TYPE_SHIFT; } /* assert macros */ @@ -1244,6 +1242,5 @@ extern u32 *const T_den; #endif void config_data_eye_leveling_samples(u32 emif_base); -u32 emif_sdram_type(void); const struct read_write_regs *get_bug_regs(u32 *iterations); #endif diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c index 4aae230..d7b9e5a 100644 --- a/board/ti/am43xx/board.c +++ b/board/ti/am43xx/board.c @@ -148,6 +148,29 @@ static const struct dpll_params idk_dpll_ddr = { 400, 23, 1, -1, 2, -1, -1 }; +static const u32 ext_phy_ctrl_const_base_lpddr2[] = { + 0x00500050, + 0x00350035, + 0x00350035, + 0x00350035, + 0x00350035, + 0x00350035, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x40001000, + 0x08102040 +}; + const struct ctrl_ioregs ioregs_lpddr2 = { .cm0ioctl = LPDDR2_ADDRCTRL_IOCTRL_VALUE, .cm1ioctl = LPDDR2_ADDRCTRL_WD0_IOCTRL_VALUE, @@ -318,6 +341,16 @@ static const struct emif_regs ddr3_idk_emif_regs_400Mhz = { .emif_cos_config = 0x00ffffff }; +void emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32 *size) +{ + if (board_is_eposevm()) { + *regs = ext_phy_ctrl_const_base_lpddr2; + *size = ARRAY_SIZE(ext_phy_ctrl_const_base_lpddr2); + } + + return; +} + /* * get_sys_clk_index : returns the index of the sys_clk read from * ctrl status register. This value is either -- cgit v0.10.2 From 42da5adfca451bcc27555446e486fbf679ffd728 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Wed, 10 Jun 2015 15:54:50 +0530 Subject: ARM: AM43x: Fix MAX_RAM_BANK_SIZE On AM437x-GP Evm there is 2GB of DDR3 memory available as stated in AM437x GP EVM HardwareUser's guide http://www.ti.com/lit/ug/spruhw7/spruhw7.pdf. But MAX_RAM_BANK_SIZE is defined as 1GB. Fixing MAX_RAM_BANK_SIZE to 2GB on AM43xx. Reported-by: Shivasharan Nagalikar Signed-off-by: Lokesh Vutla Reviewed-by: Tom Rini diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index fce34fa2..9d65111 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -17,7 +17,7 @@ #define CONFIG_BOARD_LATE_INIT #define CONFIG_ARCH_CPU_INIT #define CONFIG_SYS_CACHELINE_SIZE 32 -#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ +#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 21) /* 2GB */ #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ #include -- cgit v0.10.2 From 2ce6ecaccaa0b1bea31cdbe05f5f5c54d2468db0 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 11 Jun 2015 19:14:50 +0900 Subject: avr32: move CONFIG_SYS_GENERIC_BOARD to Kconfig MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Now all the AVR32 boards have been converted into Generic Board. Select it in Kconfig and clean up defines in header files. Signed-off-by: Masahiro Yamada Acked-by: Andreas Bießmann diff --git a/arch/Kconfig b/arch/Kconfig index 200588a..96db5c5 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -25,6 +25,7 @@ config ARM config AVR32 bool "AVR32 architecture" select HAVE_GENERIC_BOARD + select SYS_GENERIC_BOARD config BLACKFIN bool "Blackfin architecture" diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index 56bd7f8..c4a6952 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -14,7 +14,6 @@ #define CONFIG_AT32AP7000 #define CONFIG_ATNGW100 -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_EARLY_INIT_R diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h index ea1fb58..868ec3a 100644 --- a/include/configs/atngw100mkii.h +++ b/include/configs/atngw100mkii.h @@ -16,7 +16,6 @@ #define CONFIG_AT32AP7000 #define CONFIG_ATNGW100MKII -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_EARLY_INIT_R diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index 64b5519..4beb068 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -95,7 +95,6 @@ #define CONFIG_BOOTP_GATEWAY /* generic board */ -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_EARLY_INIT_R diff --git a/include/configs/grasshopper.h b/include/configs/grasshopper.h index 99d2389..e183f51 100644 --- a/include/configs/grasshopper.h +++ b/include/configs/grasshopper.h @@ -62,7 +62,6 @@ #define CONFIG_USART_BASE ATMEL_BASE_USART1 #define CONFIG_USART_ID 1 -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_EARLY_INIT_R -- cgit v0.10.2 From c997da5c53586e0cb220d94179f922e865cffb62 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Thu, 4 Jun 2015 10:08:50 +0530 Subject: ARM: DRA7: emif: Fix DDR init sequence during warm reset Unlike OMAP5, EMIF PHY used in DRA7 will be left in unknown state after warm reset, emif needs to be configured to bring it back to a known state. So configure EMIF during warm reset. Reported-by: Roger Quadros Signed-off-by: Lokesh Vutla diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c index ca22c00..f5b22f6 100644 --- a/arch/arm/cpu/armv7/omap-common/emif-common.c +++ b/arch/arm/cpu/armv7/omap-common/emif-common.c @@ -1170,7 +1170,7 @@ static void do_sdram_init(u32 base) * Changing the timing registers in EMIF can happen(going from one * OPP to another) */ - if (!(in_sdram || warm_reset())) { + if (!in_sdram && (!warm_reset() || is_dra7xx())) { if (emif_sdram_type(regs->sdram_config) == EMIF_SDRAM_TYPE_LPDDR2) lpddr2_init(base, regs); @@ -1178,7 +1178,7 @@ static void do_sdram_init(u32 base) ddr3_init(base, regs); } if (warm_reset() && (emif_sdram_type(regs->sdram_config) == - EMIF_SDRAM_TYPE_DDR3)) { + EMIF_SDRAM_TYPE_DDR3) && !is_dra7xx()) { set_lpmode_selfrefresh(base); emif_reset_phy(base); omap5_ddr3_leveling(base, regs); -- cgit v0.10.2 From 6ce8932494043246667979b3efacdee5e4ec5dfd Mon Sep 17 00:00:00 2001 From: Yegor Yefremov Date: Fri, 29 May 2015 19:27:29 +0200 Subject: board: add support for Vision System's Baltos Industrial PC Vision Systems's Baltos is based on AM335x SoC from Texas Instruments. This patch adds support such Industrial PCs in mainline u-boot. [ balbi@ti.com: updated original patch to current u-boot ] Signed-off-by: Yegor Yefremov Signed-off-by: Felipe Balbi diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index fd47e60..ac86518 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -369,6 +369,14 @@ config TARGET_PENGWYN select DM_SERIAL select DM_GPIO +config TARGET_AM335X_BALTOS + bool "Support am335x_baltos" + select CPU_V7 + select SUPPORT_SPL + select DM + select DM_SERIAL + select DM_GPIO + config TARGET_AM335X_EVM bool "Support am335x_evm" select CPU_V7 @@ -964,6 +972,7 @@ source "board/trizepsiv/Kconfig" source "board/ttcontrol/vision2/Kconfig" source "board/udoo/Kconfig" source "board/vpac270/Kconfig" +source "board/vscom/baltos/Kconfig" source "board/wandboard/Kconfig" source "board/warp/Kconfig" source "board/woodburn/Kconfig" diff --git a/board/vscom/baltos/Kconfig b/board/vscom/baltos/Kconfig new file mode 100644 index 0000000..bc1edcf --- /dev/null +++ b/board/vscom/baltos/Kconfig @@ -0,0 +1,24 @@ +if TARGET_AM335X_BALTOS + +config SYS_BOARD + default "baltos" + +config SYS_VENDOR + default "vscom" + +config SYS_SOC + default "am33xx" + +config SYS_CONFIG_NAME + default "baltos" + +config CONS_INDEX + int "UART used for console" + range 1 6 + default 1 + help + The AM335x SoC has a total of 6 UARTs (UART0 to UART5 as referenced + in documentation, etc) available to it. Depending on your specific + board you may want something other than UART0. + +endif diff --git a/board/vscom/baltos/Makefile b/board/vscom/baltos/Makefile new file mode 100644 index 0000000..804ac37 --- /dev/null +++ b/board/vscom/baltos/Makefile @@ -0,0 +1,13 @@ +# +# Makefile +# +# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),) +obj-y := mux.o +endif + +obj-y += board.o diff --git a/board/vscom/baltos/README b/board/vscom/baltos/README new file mode 100644 index 0000000..f744ace --- /dev/null +++ b/board/vscom/baltos/README @@ -0,0 +1 @@ +BSP for VScom OnRISC Balios family devices, like Balios iR 5221. diff --git a/board/vscom/baltos/board.c b/board/vscom/baltos/board.c new file mode 100644 index 0000000..99ca60e --- /dev/null +++ b/board/vscom/baltos/board.c @@ -0,0 +1,474 @@ +/* + * board.c + * + * Board functions for TI AM335X based boards + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "board.h" + +DECLARE_GLOBAL_DATA_PTR; + +/* GPIO that controls power to DDR on EVM-SK */ +#define GPIO_DDR_VTT_EN 7 +#define DIP_S1 44 + +static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + +static int baltos_set_console(void) +{ + int val, i, dips = 0; + char buf[7]; + + for (i = 0; i < 4; i++) { + sprintf(buf, "dip_s%d", i + 1); + + if (gpio_request(DIP_S1 + i, buf)) { + printf("failed to export GPIO %d\n", DIP_S1 + i); + return 0; + } + + if (gpio_direction_input(DIP_S1 + i)) { + printf("failed to set GPIO %d direction\n", DIP_S1 + i); + return 0; + } + + val = gpio_get_value(DIP_S1 + i); + dips |= val << i; + } + + printf("DIPs: 0x%1x\n", (~dips) & 0xf); + + if ((dips & 0xf) == 0xe) + setenv("console", "ttyUSB0,115200n8"); + + return 0; +} + +static int read_eeprom(BSP_VS_HWPARAM *header) +{ + i2c_set_bus_num(1); + + /* Check if baseboard eeprom is available */ + if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) { + puts("Could not probe the EEPROM; something fundamentally " + "wrong on the I2C bus.\n"); + return -ENODEV; + } + + /* read the eeprom using i2c */ + if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1, (uchar *)header, + sizeof(BSP_VS_HWPARAM))) { + puts("Could not read the EEPROM; something fundamentally" + " wrong on the I2C bus.\n"); + return -EIO; + } + + if (header->Magic != 0xDEADBEEF) { + + printf("Incorrect magic number (0x%x) in EEPROM\n", + header->Magic); + + /* fill default values */ + header->SystemId = 211; + header->MAC1[0] = 0x00; + header->MAC1[1] = 0x00; + header->MAC1[2] = 0x00; + header->MAC1[3] = 0x00; + header->MAC1[4] = 0x00; + header->MAC1[5] = 0x01; + + header->MAC2[0] = 0x00; + header->MAC2[1] = 0x00; + header->MAC2[2] = 0x00; + header->MAC2[3] = 0x00; + header->MAC2[4] = 0x00; + header->MAC2[5] = 0x02; + + header->MAC3[0] = 0x00; + header->MAC3[1] = 0x00; + header->MAC3[2] = 0x00; + header->MAC3[3] = 0x00; + header->MAC3[4] = 0x00; + header->MAC3[5] = 0x03; + } + + return 0; +} + +#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT) + +static const struct ddr_data ddr3_baltos_data = { + .datardsratio0 = MT41K256M16HA125E_RD_DQS, + .datawdsratio0 = MT41K256M16HA125E_WR_DQS, + .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE, + .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA, +}; + +static const struct cmd_control ddr3_baltos_cmd_ctrl_data = { + .cmd0csratio = MT41K256M16HA125E_RATIO, + .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT, + + .cmd1csratio = MT41K256M16HA125E_RATIO, + .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT, + + .cmd2csratio = MT41K256M16HA125E_RATIO, + .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT, +}; + +static struct emif_regs ddr3_baltos_emif_reg_data = { + .sdram_config = MT41K256M16HA125E_EMIF_SDCFG, + .ref_ctrl = MT41K256M16HA125E_EMIF_SDREF, + .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1, + .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2, + .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3, + .zq_config = MT41K256M16HA125E_ZQ_CFG, + .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY, +}; + +#ifdef CONFIG_SPL_OS_BOOT +int spl_start_uboot(void) +{ + /* break into full u-boot on 'c' */ + return (serial_tstc() && serial_getc() == 'c'); +} +#endif + +#define OSC (V_OSCK/1000000) +const struct dpll_params dpll_ddr = { + 266, OSC-1, 1, -1, -1, -1, -1}; +const struct dpll_params dpll_ddr_evm_sk = { + 303, OSC-1, 1, -1, -1, -1, -1}; +const struct dpll_params dpll_ddr_baltos = { + 400, OSC-1, 1, -1, -1, -1, -1}; + +void am33xx_spl_board_init(void) +{ + int mpu_vdd; + int sil_rev; + + /* Get the frequency */ + dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev); + + /* + * The GP EVM, IDK and EVM SK use a TPS65910 PMIC. For all + * MPU frequencies we support we use a CORE voltage of + * 1.1375V. For MPU voltage we need to switch based on + * the frequency we are running at. + */ + i2c_set_bus_num(1); + + if (i2c_probe(TPS65910_CTRL_I2C_ADDR)) { + puts("i2c: cannot access TPS65910\n"); + return; + } + + /* + * Depending on MPU clock and PG we will need a different + * VDD to drive at that speed. + */ + sil_rev = readl(&cdev->deviceid) >> 28; + mpu_vdd = am335x_get_tps65910_mpu_vdd(sil_rev, + dpll_mpu_opp100.m); + + /* Tell the TPS65910 to use i2c */ + tps65910_set_i2c_control(); + + /* First update MPU voltage. */ + if (tps65910_voltage_update(MPU, mpu_vdd)) + return; + + /* Second, update the CORE voltage. */ + if (tps65910_voltage_update(CORE, TPS65910_OP_REG_SEL_1_1_3)) + return; + + /* Set CORE Frequencies to OPP100 */ + do_setup_dpll(&dpll_core_regs, &dpll_core_opp100); + + /* Set MPU Frequency to what we detected now that voltages are set */ + do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100); + + writel(0x000010ff, PRM_DEVICE_INST + 4); +} + +const struct dpll_params *get_dpll_ddr_params(void) +{ + enable_i2c1_pin_mux(); + i2c_set_bus_num(1); + + return &dpll_ddr_baltos; +} + +void set_uart_mux_conf(void) +{ + enable_uart0_pin_mux(); +} + +void set_mux_conf_regs(void) +{ + enable_board_pin_mux(); +} + +const struct ctrl_ioregs ioregs_baltos = { + .cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE, + .cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, + .cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE, + .dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE, + .dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, +}; + +void sdram_init(void) +{ + gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en"); + gpio_direction_output(GPIO_DDR_VTT_EN, 1); + + config_ddr(400, &ioregs_baltos, + &ddr3_baltos_data, + &ddr3_baltos_cmd_ctrl_data, + &ddr3_baltos_emif_reg_data, 0); +} +#endif + +/* + * Basic board specific setup. Pinmux has been handled already. + */ +int board_init(void) +{ +#if defined(CONFIG_HW_WATCHDOG) + hw_watchdog_init(); +#endif + + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; +#if defined(CONFIG_NOR) || defined(CONFIG_NAND) + gpmc_init(); +#endif + return 0; +} + +int ft_board_setup(void *blob, bd_t *bd) +{ + int node, ret; + unsigned char mac_addr[6]; + BSP_VS_HWPARAM header; + + /* get production data */ + if (read_eeprom(&header)) + return 0; + + /* setup MAC1 */ + mac_addr[0] = header.MAC1[0]; + mac_addr[1] = header.MAC1[1]; + mac_addr[2] = header.MAC1[2]; + mac_addr[3] = header.MAC1[3]; + mac_addr[4] = header.MAC1[4]; + mac_addr[5] = header.MAC1[5]; + + + node = fdt_path_offset(blob, "/ocp/ethernet/slave@4a100200"); + if (node < 0) { + printf("no /soc/fman/ethernet path offset\n"); + return -ENODEV; + } + + ret = fdt_setprop(blob, node, "mac-address", &mac_addr, 6); + if (ret) { + printf("error setting local-mac-address property\n"); + return -ENODEV; + } + + /* setup MAC2 */ + mac_addr[0] = header.MAC2[0]; + mac_addr[1] = header.MAC2[1]; + mac_addr[2] = header.MAC2[2]; + mac_addr[3] = header.MAC2[3]; + mac_addr[4] = header.MAC2[4]; + mac_addr[5] = header.MAC2[5]; + + node = fdt_path_offset(blob, "/ocp/ethernet/slave@4a100300"); + if (node < 0) { + printf("no /soc/fman/ethernet path offset\n"); + return -ENODEV; + } + + ret = fdt_setprop(blob, node, "mac-address", &mac_addr, 6); + if (ret) { + printf("error setting local-mac-address property\n"); + return -ENODEV; + } + + printf("\nFDT was successfully setup\n"); + + return 0; +} + +static struct module_pin_mux dip_pin_mux[] = { + {OFFSET(gpmc_ad12), (MODE(7) | RXACTIVE )}, /* GPIO1_12 */ + {OFFSET(gpmc_ad13), (MODE(7) | RXACTIVE )}, /* GPIO1_13 */ + {OFFSET(gpmc_ad14), (MODE(7) | RXACTIVE )}, /* GPIO1_14 */ + {OFFSET(gpmc_ad15), (MODE(7) | RXACTIVE )}, /* GPIO1_15 */ + {-1}, +}; + +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) +{ +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + BSP_VS_HWPARAM header; + char model[4]; + + /* get production data */ + if (read_eeprom(&header)) { + sprintf(model, "211"); + } else { + sprintf(model, "%d", header.SystemId); + if (header.SystemId == 215) { + configure_module_pin_mux(dip_pin_mux); + baltos_set_console(); + } + } + setenv("board_name", model); +#endif + + return 0; +} +#endif + +#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) +static void cpsw_control(int enabled) +{ + /* VTP can be added here */ + + return; +} + +static struct cpsw_slave_data cpsw_slaves[] = { + { + .slave_reg_ofs = 0x208, + .sliver_reg_ofs = 0xd80, + .phy_addr = 0, + }, + { + .slave_reg_ofs = 0x308, + .sliver_reg_ofs = 0xdc0, + .phy_addr = 7, + }, +}; + +static struct cpsw_platform_data cpsw_data = { + .mdio_base = CPSW_MDIO_BASE, + .cpsw_base = CPSW_BASE, + .mdio_div = 0xff, + .channels = 8, + .cpdma_reg_ofs = 0x800, + .slaves = 2, + .slave_data = cpsw_slaves, + .active_slave = 1, + .ale_reg_ofs = 0xd00, + .ale_entries = 1024, + .host_port_reg_ofs = 0x108, + .hw_stats_reg_ofs = 0x900, + .bd_ram_ofs = 0x2000, + .mac_control = (1 << 5), + .control = cpsw_control, + .host_port_num = 0, + .version = CPSW_CTRL_VERSION_2, +}; +#endif + +#if ((defined(CONFIG_SPL_ETH_SUPPORT) || defined(CONFIG_SPL_USBETH_SUPPORT)) \ + && defined(CONFIG_SPL_BUILD)) || \ + ((defined(CONFIG_DRIVER_TI_CPSW) || \ + defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) && \ + !defined(CONFIG_SPL_BUILD)) +int board_eth_init(bd_t *bis) +{ + int rv, n = 0; + uint8_t mac_addr[6]; + uint32_t mac_hi, mac_lo; + __maybe_unused struct am335x_baseboard_id header; + + /* + * Note here that we're using CPSW1 since that has a 1Gbit PHY while + * CSPW0 has a 100Mbit PHY. + * + * On product, CPSW1 maps to port labeled WAN. + */ + + /* try reading mac address from efuse */ + mac_lo = readl(&cdev->macid1l); + mac_hi = readl(&cdev->macid1h); + mac_addr[0] = mac_hi & 0xFF; + mac_addr[1] = (mac_hi & 0xFF00) >> 8; + mac_addr[2] = (mac_hi & 0xFF0000) >> 16; + mac_addr[3] = (mac_hi & 0xFF000000) >> 24; + mac_addr[4] = mac_lo & 0xFF; + mac_addr[5] = (mac_lo & 0xFF00) >> 8; + +#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) + if (!getenv("ethaddr")) { + printf(" not set. Validating first E-fuse MAC\n"); + + if (is_valid_ethaddr(mac_addr)) + eth_setenv_enetaddr("ethaddr", mac_addr); + } + +#ifdef CONFIG_DRIVER_TI_CPSW + writel((GMII1_SEL_RMII | GMII2_SEL_RGMII | RGMII2_IDMODE), &cdev->miisel); + cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_RGMII; + rv = cpsw_register(&cpsw_data); + if (rv < 0) + printf("Error %d registering CPSW switch\n", rv); + else + n += rv; +#endif + + /* + * + * CPSW RGMII Internal Delay Mode is not supported in all PVT + * operating points. So we must set the TX clock delay feature + * in the AR8051 PHY. Since we only support a single ethernet + * device in U-Boot, we only do this for the first instance. + */ +#define AR8051_PHY_DEBUG_ADDR_REG 0x1d +#define AR8051_PHY_DEBUG_DATA_REG 0x1e +#define AR8051_DEBUG_RGMII_CLK_DLY_REG 0x5 +#define AR8051_RGMII_TX_CLK_DLY 0x100 + const char *devname; + devname = miiphy_get_current_dev(); + + miiphy_write(devname, 0x7, AR8051_PHY_DEBUG_ADDR_REG, + AR8051_DEBUG_RGMII_CLK_DLY_REG); + miiphy_write(devname, 0x7, AR8051_PHY_DEBUG_DATA_REG, + AR8051_RGMII_TX_CLK_DLY); +#endif + return n; +} +#endif diff --git a/board/vscom/baltos/board.h b/board/vscom/baltos/board.h new file mode 100644 index 0000000..bcdb648 --- /dev/null +++ b/board/vscom/baltos/board.h @@ -0,0 +1,90 @@ +/* + * board.h + * + * TI AM335x boards information header + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +/* + * TI AM335x parts define a system EEPROM that defines certain sub-fields. + * We use these fields to in turn see what board we are on, and what + * that might require us to set or not set. + */ +#define HDR_NO_OF_MAC_ADDR 3 +#define HDR_ETH_ALEN 6 +#define HDR_NAME_LEN 8 + +struct am335x_baseboard_id { + unsigned int magic; + char name[HDR_NAME_LEN]; + char version[4]; + char serial[12]; + char config[32]; + char mac_addr[HDR_NO_OF_MAC_ADDR][HDR_ETH_ALEN]; +}; + +typedef struct _BSP_VS_HWPARAM // v1.0 +{ + uint32_t Magic; + uint32_t HwRev; + uint32_t SerialNumber; + char PrdDate[11]; // as a string ie. "01.01.2006" + uint16_t SystemId; + uint8_t MAC1[6]; // internal EMAC + uint8_t MAC2[6]; // SMSC9514 + uint8_t MAC3[6]; // WL1271 WLAN +} __attribute__ ((packed)) BSP_VS_HWPARAM; + +static inline int board_is_bone(struct am335x_baseboard_id *header) +{ + return !strncmp(header->name, "A335BONE", HDR_NAME_LEN); +} + +static inline int board_is_bone_lt(struct am335x_baseboard_id *header) +{ + return !strncmp(header->name, "A335BNLT", HDR_NAME_LEN); +} + +static inline int board_is_evm_sk(struct am335x_baseboard_id *header) +{ + return !strncmp("A335X_SK", header->name, HDR_NAME_LEN); +} + +static inline int board_is_idk(struct am335x_baseboard_id *header) +{ + return !strncmp(header->config, "SKU#02", 6); +} + +static inline int board_is_gp_evm(struct am335x_baseboard_id *header) +{ + return !strncmp("A33515BB", header->name, HDR_NAME_LEN); +} + +static inline int board_is_evm_15_or_later(struct am335x_baseboard_id *header) +{ + return (board_is_gp_evm(header) && + strncmp("1.5", header->version, 3) <= 0); +} + +/* + * We have three pin mux functions that must exist. We must be able to enable + * uart0, for initial output and i2c0 to read the main EEPROM. We then have a + * main pinmux function that can be overridden to enable all other pinmux that + * is required on the board. + */ +void enable_uart0_pin_mux(void); +void enable_uart1_pin_mux(void); +void enable_uart2_pin_mux(void); +void enable_uart3_pin_mux(void); +void enable_uart4_pin_mux(void); +void enable_uart5_pin_mux(void); +void enable_i2c0_pin_mux(void); +void enable_i2c1_pin_mux(void); +void enable_board_pin_mux(void); +#endif diff --git a/board/vscom/baltos/mux.c b/board/vscom/baltos/mux.c new file mode 100644 index 0000000..8783b25 --- /dev/null +++ b/board/vscom/baltos/mux.c @@ -0,0 +1,194 @@ +/* + * mux.c + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include "board.h" + +static struct module_pin_mux uart0_pin_mux[] = { + {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ + {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ + {-1}, +}; + +static struct module_pin_mux uart1_pin_mux[] = { + {OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART1_RXD */ + {OFFSET(uart1_txd), (MODE(0) | PULLUDEN)}, /* UART1_TXD */ + {-1}, +}; + +static struct module_pin_mux uart2_pin_mux[] = { + {OFFSET(spi0_sclk), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART2_RXD */ + {OFFSET(spi0_d0), (MODE(1) | PULLUDEN)}, /* UART2_TXD */ + {-1}, +}; + +static struct module_pin_mux uart3_pin_mux[] = { + {OFFSET(spi0_cs1), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART3_RXD */ + {OFFSET(ecap0_in_pwm0_out), (MODE(1) | PULLUDEN)}, /* UART3_TXD */ + {-1}, +}; + +static struct module_pin_mux uart4_pin_mux[] = { + {OFFSET(gpmc_wait0), (MODE(6) | PULLUP_EN | RXACTIVE)}, /* UART4_RXD */ + {OFFSET(gpmc_wpn), (MODE(6) | PULLUDEN)}, /* UART4_TXD */ + {-1}, +}; + +static struct module_pin_mux uart5_pin_mux[] = { + {OFFSET(lcd_data9), (MODE(4) | PULLUP_EN | RXACTIVE)}, /* UART5_RXD */ + {OFFSET(lcd_data8), (MODE(4) | PULLUDEN)}, /* UART5_TXD */ + {-1}, +}; + +static struct module_pin_mux mmc0_pin_mux[] = { + {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ + {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ + {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ + {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ + {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ + {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ + //{OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */ + {-1}, +}; + +static struct module_pin_mux i2c0_pin_mux[] = { + {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | + PULLUDEN | SLEWCTRL)}, /* I2C_DATA */ + {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | + PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */ + {-1}, +}; + +static struct module_pin_mux i2c1_pin_mux[] = { + {OFFSET(spi0_d1), (MODE(2) | RXACTIVE | + PULLUDEN | SLEWCTRL)}, /* I2C_DATA */ + {OFFSET(spi0_cs0), (MODE(2) | RXACTIVE | + PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */ + {-1}, +}; + +static struct module_pin_mux gpio0_7_pin_mux[] = { + {OFFSET(ecap0_in_pwm0_out), (MODE(7) | PULLUDEN)}, /* GPIO0_7 */ + {-1}, +}; + +static struct module_pin_mux rmii1_pin_mux[] = { + {OFFSET(mii1_crs), MODE(1) | RXACTIVE}, /* RGMII1_TCTL */ + {OFFSET(mii1_txen), MODE(1)}, /* RGMII1_TCTL */ + {OFFSET(mii1_txd1), MODE(1)}, /* RGMII1_TCTL */ + {OFFSET(mii1_txd0), MODE(1)}, /* RGMII1_TCTL */ + {OFFSET(mii1_rxd1), MODE(1) | RXACTIVE}, /* RGMII1_TCTL */ + {OFFSET(mii1_rxd0), MODE(1) | RXACTIVE}, /* RGMII1_TCTL */ + {OFFSET(rmii1_refclk), MODE(0) | RXACTIVE}, /* RGMII1_TCTL */ + {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */ + {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ + {-1}, +}; + +static struct module_pin_mux rgmii2_pin_mux[] = { + {OFFSET(gpmc_a0), MODE(2)}, /* RGMII1_TCTL */ + {OFFSET(gpmc_a1), MODE(2) | RXACTIVE}, /* RGMII1_RCTL */ + {OFFSET(gpmc_a2), MODE(2)}, /* RGMII1_TD3 */ + {OFFSET(gpmc_a3), MODE(2)}, /* RGMII1_TD2 */ + {OFFSET(gpmc_a4), MODE(2)}, /* RGMII1_TD1 */ + {OFFSET(gpmc_a5), MODE(2)}, /* RGMII1_TD0 */ + {OFFSET(gpmc_a6), MODE(2)}, /* RGMII1_TCLK */ + {OFFSET(gpmc_a7), MODE(2) | RXACTIVE}, /* RGMII1_RCLK */ + {OFFSET(gpmc_a8), MODE(2) | RXACTIVE}, /* RGMII1_RD3 */ + {OFFSET(gpmc_a9), MODE(2) | RXACTIVE}, /* RGMII1_RD2 */ + {OFFSET(gpmc_a10), MODE(2) | RXACTIVE}, /* RGMII1_RD1 */ + {OFFSET(gpmc_a11), MODE(2) | RXACTIVE}, /* RGMII1_RD0 */ + {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */ + {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ + {-1}, +}; + +static struct module_pin_mux nand_pin_mux[] = { + {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */ + {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */ + {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */ + {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */ + {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */ + {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */ + {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */ + {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */ + {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */ + {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */ + {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */ + {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */ + {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */ + {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */ + {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */ + {-1}, +}; + +void enable_uart0_pin_mux(void) +{ + configure_module_pin_mux(uart0_pin_mux); +} + +void enable_uart1_pin_mux(void) +{ + configure_module_pin_mux(uart1_pin_mux); +} + +void enable_uart2_pin_mux(void) +{ + configure_module_pin_mux(uart2_pin_mux); +} + +void enable_uart3_pin_mux(void) +{ + configure_module_pin_mux(uart3_pin_mux); +} + +void enable_uart4_pin_mux(void) +{ + configure_module_pin_mux(uart4_pin_mux); +} + +void enable_uart5_pin_mux(void) +{ + configure_module_pin_mux(uart5_pin_mux); +} + +void enable_i2c0_pin_mux(void) +{ + configure_module_pin_mux(i2c0_pin_mux); +} + +void enable_i2c1_pin_mux(void) +{ + configure_module_pin_mux(i2c1_pin_mux); +} + +void enable_board_pin_mux() +{ + /* Baltos */ + configure_module_pin_mux(i2c1_pin_mux); + configure_module_pin_mux(gpio0_7_pin_mux); + configure_module_pin_mux(rgmii2_pin_mux); + configure_module_pin_mux(rmii1_pin_mux); + configure_module_pin_mux(mmc0_pin_mux); + +#if defined(CONFIG_NAND) + configure_module_pin_mux(nand_pin_mux); +#endif +} diff --git a/board/vscom/baltos/u-boot.lds b/board/vscom/baltos/u-boot.lds new file mode 100644 index 0000000..315ba5b --- /dev/null +++ b/board/vscom/baltos/u-boot.lds @@ -0,0 +1,128 @@ +/* + * Copyright (c) 2004-2008 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + *(.__image_copy_start) + *(.vectors) + CPUDIR/start.o (.text*) + board/vscom/baltos/built-in.o (.text*) + *(.text*) + } + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + + . = ALIGN(4); + .data : { + *(.data*) + } + + . = ALIGN(4); + + . = .; + + . = ALIGN(4); + .u_boot_list : { + KEEP(*(SORT(.u_boot_list*))); + } + + . = ALIGN(4); + + .image_copy_end : + { + *(.__image_copy_end) + } + + .rel_dyn_start : + { + *(.__rel_dyn_start) + } + + .rel.dyn : { + *(.rel*) + } + + .rel_dyn_end : + { + *(.__rel_dyn_end) + } + + .hash : { *(.hash*) } + + .end : + { + *(.__end) + } + + _image_binary_end = .; + + /* + * Deprecated: this MMU section is used by pxa at present but + * should not be used by new boards/CPUs. + */ + . = ALIGN(4096); + .mmutable : { + *(.mmutable) + } + +/* + * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c + * __bss_base and __bss_limit are for linker only (overlay ordering) + */ + + .bss_start __rel_dyn_start (OVERLAY) : { + KEEP(*(.__bss_start)); + __bss_base = .; + } + + .bss __bss_base (OVERLAY) : { + *(.bss*) + . = ALIGN(4); + __bss_limit = .; + } + + .bss_end __bss_limit (OVERLAY) : { + KEEP(*(.__bss_end)); + } + + .dynsym _image_binary_end : { *(.dynsym) } + .dynbss : { *(.dynbss) } + .dynstr : { *(.dynstr*) } + .dynamic : { *(.dynamic*) } + .gnu.hash : { *(.gnu.hash) } + .plt : { *(.plt*) } + .interp : { *(.interp*) } + .gnu : { *(.gnu*) } + .ARM.exidx : { *(.ARM.exidx*) } +} diff --git a/configs/am335x_baltos_defconfig b/configs/am335x_baltos_defconfig new file mode 100644 index 0000000..679b04f --- /dev/null +++ b/configs/am335x_baltos_defconfig @@ -0,0 +1,7 @@ +CONFIG_SPL=y +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SYS_EXTRA_OPTIONS="NAND" +CONFIG_CONS_INDEX=1 +CONFIG_ARM=y +CONFIG_TARGET_AM335X_BALTOS=y diff --git a/include/configs/baltos.h b/include/configs/baltos.h new file mode 100644 index 0000000..6242895 --- /dev/null +++ b/include/configs/baltos.h @@ -0,0 +1,340 @@ +/* + * am335x_evm.h + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __CONFIG_BALTOS_H +#define __CONFIG_BALTOS_H + +#include + +#define MACH_TYPE_TIAM335EVM 3589 /* Until the next sync */ +#define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM +#define CONFIG_BOARD_LATE_INIT + +/* Clock Defines */ +#define V_OSCK 24000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK) + +/* Custom script for NOR */ +#define CONFIG_SYS_LDSCRIPT "board/vscom/baltos/u-boot.lds" + +/* Always 128 KiB env size */ +#define CONFIG_ENV_SIZE (128 << 10) + +/* Enhance our eMMC support / experience. */ +#define CONFIG_CMD_GPT +#define CONFIG_EFI_PARTITION +#define CONFIG_PARTITION_UUIDS +#define CONFIG_CMD_PART + +/* FIT support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ +#define CONFIG_OF_BOARD_SETUP + +/* UBI Support */ +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE +#define CONFIG_RBTREE +#define CONFIG_LZO +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS + +/* I2C configuration */ +#undef CONFIG_SYS_OMAP24_I2C_SPEED +#define CONFIG_SYS_OMAP24_I2C_SPEED 10000 + +#ifdef CONFIG_NAND +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000 +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os parameters */ +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */ +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif +#define NANDARGS \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "nandargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "${mtdparts} " \ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=5\0" \ + "nandrootfstype=ubifs rootwait=1\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "setenv loadaddr 0x84000000; " \ + "ubi part UBI; " \ + "ubifsmount ubi0:kernel; " \ + "ubifsload $loadaddr kernel-fit.itb;" \ + "ubifsumount; " \ + "bootm ${loadaddr}#conf${board_name}\0" +#else +#define NANDARGS "" +#endif + +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + +#ifndef CONFIG_SPL_BUILD +#define CONFIG_EXTRA_ENV_SETTINGS \ + DEFAULT_LINUX_BOOT_ENV \ + "boot_fdt=try\0" \ + "bootpart=0:2\0" \ + "bootdir=/boot\0" \ + "bootfile=zImage\0" \ + "fdtfile=undefined\0" \ + "console=ttyO0,115200n8\0" \ + "partitions=" \ + "uuid_disk=${uuid_gpt_disk};" \ + "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ + "optargs=\0" \ + "mmcdev=0\0" \ + "mmcroot=/dev/mmcblk0p2 ro\0" \ + "mmcrootfstype=ext4 rootwait\0" \ + "rootpath=/export/rootfs\0" \ + "nfsopts=nolock\0" \ + "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \ + "::off\0" \ + "ramroot=/dev/ram0 rw\0" \ + "ramrootfstype=ext2\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "${mtdparts} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ + "spiroot=/dev/mtdblock4 rw\0" \ + "spirootfstype=jffs2\0" \ + "spisrcaddr=0xe0000\0" \ + "spiimgsize=0x362000\0" \ + "spibusno=0\0" \ + "spiargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${spiroot} " \ + "rootfstype=${spirootfstype}\0" \ + "netargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=/dev/nfs " \ + "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ + "ip=dhcp\0" \ + "bootenv=uEnv.txt\0" \ + "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ + "importbootenv=echo Importing environment from mmc ...; " \ + "env import -t $loadaddr $filesize\0" \ + "ramargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${ramroot} " \ + "rootfstype=${ramrootfstype}\0" \ + "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ + "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ + "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ + "mmcloados=run mmcargs; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootz ${loadaddr} - ${fdtaddr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" \ + "mmcboot=mmc dev ${mmcdev}; " \ + "if mmc rescan; then " \ + "echo SD/MMC found on device ${mmcdev};" \ + "if run loadbootenv; then " \ + "echo Loaded environment from ${bootenv};" \ + "run importbootenv;" \ + "fi;" \ + "if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "if run loadimage; then " \ + "run mmcloados;" \ + "fi;" \ + "fi;\0" \ + "spiboot=echo Booting from spi ...; " \ + "run spiargs; " \ + "sf probe ${spibusno}:0; " \ + "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \ + "bootz ${loadaddr}\0" \ + "netboot=echo Booting from network ...; " \ + "setenv autoload no; " \ + "dhcp; " \ + "tftp ${loadaddr} ${bootfile}; " \ + "tftp ${fdtaddr} ${fdtfile}; " \ + "run netargs; " \ + "bootz ${loadaddr} - ${fdtaddr}\0" \ + "ramboot=echo Booting from ramdisk ...; " \ + "run ramargs; " \ + "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \ + "findfdt=setenv fdtfile am335x-baltos.dtb\0" \ + NANDARGS + /*DFUARGS*/ +#endif + +#define CONFIG_BOOTCOMMAND \ + "run findfdt; " \ + "run mmcboot;" \ + "setenv mmcdev 1; " \ + "setenv bootpart 1:2; " \ + "run mmcboot;" \ + "run nandboot;" + +#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_NFS + +/* NS16550 Configuration */ +#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ +#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ +#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ +#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ +#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ +#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_CMD_EEPROM +#define CONFIG_ENV_EEPROM_IS_ON_I2C +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_I2C_MULTI_EEPROMS + +/* PMIC support */ +#define CONFIG_POWER_TPS65910 + +/* SPL */ +#ifndef CONFIG_NOR_BOOT +#define CONFIG_SPL_POWER_SUPPORT +#define CONFIG_SPL_YMODEM_SUPPORT + +/* Bootcount using the RTC block */ +#define CONFIG_BOOTCOUNT_LIMIT +#define CONFIG_BOOTCOUNT_AM33XX + +/* USB gadget RNDIS */ +/*#define CONFIG_SPL_MUSB_NEW_SUPPORT*/ + +/* General network SPL, both CPSW and USB gadget RNDIS */ +/*#define CONFIG_SPL_NET_SUPPORT +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"*/ + +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" + +#ifdef CONFIG_NAND +#define CONFIG_NAND_OMAP_GPMC +#define CONFIG_NAND_OMAP_ELM +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ + CONFIG_SYS_NAND_PAGE_SIZE) +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) +#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS +#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ + 10, 11, 12, 13, 14, 15, 16, 17, \ + 18, 19, 20, 21, 22, 23, 24, 25, \ + 26, 27, 28, 29, 30, 31, 32, 33, \ + 34, 35, 36, 37, 38, 39, 40, 41, \ + 42, 43, 44, 45, 46, 47, 48, 49, \ + 50, 51, 52, 53, 54, 55, 56, 57, } + +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 14 +#define CONFIG_SYS_NAND_ONFI_DETECTION +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE +#endif +#endif + +/* + * USB configuration. We enable MUSB support, both for host and for + * gadget. We set USB0 as peripheral and USB1 as host, based on the + * board schematic and physical port wired to each. Then for host we + * add mass storage support and for gadget we add both RNDIS ethernet + * and DFU. + */ +#define CONFIG_USB_MUSB_DSPS +#define CONFIG_ARCH_MISC_INIT +#define CONFIG_MUSB_GADGET +#define CONFIG_MUSB_PIO_ONLY +#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT +#define CONFIG_USB_GADGET +#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET_VBUS_DRAW 2 +#define CONFIG_MUSB_HOST +#define CONFIG_AM335X_USB0 +#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL +#define CONFIG_AM335X_USB1 +#define CONFIG_AM335X_USB1_MODE MUSB_HOST + +#ifdef CONFIG_MUSB_HOST +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#endif + +#ifdef CONFIG_MUSB_GADGET +#define CONFIG_USB_ETHER +#define CONFIG_USB_ETH_RNDIS +#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" + +/* USB TI's IDs */ +#define CONFIG_G_DNL_VENDOR_NUM 0x0403 +#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 +#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" +#endif /* CONFIG_MUSB_GADGET */ + +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT) +/* disable host part of MUSB in SPL */ +#undef CONFIG_MUSB_HOST +/* disable EFI partitions and partition UUID support */ +#undef CONFIG_PARTITION_UUIDS +#undef CONFIG_EFI_PARTITION +/* + * Disable CPSW SPL support so we fit within the 101KiB limit. + */ +#undef CONFIG_SPL_ETH_SUPPORT +#endif + +/* Network. */ +#define CONFIG_PHY_GIGE +#define CONFIG_PHYLIB +#define CONFIG_PHY_ADDR 0 +#define CONFIG_PHY_SMSC +#define CONFIG_MII +#define CONFIG_CMD_MII +#define CONFIG_PHY_ATHEROS + +/* NAND support */ +#ifdef CONFIG_NAND +#define CONFIG_CMD_NAND +#define GPMC_NAND_ECC_LP_x8_LAYOUT 1 +#if !defined(CONFIG_SPI_BOOT) && !defined(CONFIG_NOR_BOOT) +#define MTDIDS_DEFAULT "nand0=omap2-nand.0" +#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \ + "128k(SPL.backup1)," \ + "128k(SPL.backup2)," \ + "128k(SPL.backup3)," \ + "1920k(u-boot)," \ + "-(UBI)" +#define CONFIG_ENV_IS_NOWHERE +#endif +#endif + +#endif /* ! __CONFIG_BALTOS_H */ -- cgit v0.10.2 From 08520bf5e4da36ec4a190e7234cac3e7641dc6d5 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 12 Jun 2015 20:52:29 -0400 Subject: omap5: Exclude more environment from SPL builds In the cases where we make use of environment in SPL we do not need these defaults compiled in and available. These are taking up space that in some cases now prevent linking, so drop. Signed-off-by: Tom Rini diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index edd51a2..24fe123 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -42,6 +42,7 @@ #define CONFIG_SYS_OMAP_ABE_SYSCK +#ifndef CONFIG_SPL_BUILD /* Define the default GPT table for eMMC */ #define PARTS_DEFAULT \ "uuid_disk=${uuid_gpt_disk};" \ @@ -95,6 +96,7 @@ #define CONFIG_USB_FASTBOOT_BUF_SIZE 0x2F000000 #define CONFIG_FASTBOOT_FLASH #define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 +#endif #include diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index 4215156..cb12c6c 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -12,10 +12,12 @@ #ifndef __CONFIG_OMAP5_EVM_H #define __CONFIG_OMAP5_EVM_H +#ifndef CONFIG_SPL_BUILD /* Define the default GPT table for eMMC */ #define PARTS_DEFAULT \ "uuid_disk=${uuid_gpt_disk};" \ "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}" +#endif #include diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 4faffef..3da7816 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -71,6 +71,7 @@ #define DFUARGS #endif +#ifndef CONFIG_SPL_BUILD #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG #define CONFIG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ @@ -146,6 +147,7 @@ "setenv mmcroot /dev/mmcblk0p2 rw; " \ "run mmcboot;" \ "" +#endif /* -- cgit v0.10.2 From e1abfa437a2917834bcb8a9ee20c1e18bfc466f5 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 14 Jun 2015 11:55:28 +0200 Subject: sunxi: musb: Do not fully reset the controler from sunxi_musb_disable Fully resetting the controller is a too big hammer, and the musb_core will then afterwards fail to communicate with any endpoints other then 0 as too much state was cleared. Instead report vbus low for 200ms which will effectively end the current session without needing to do a full reset. This fixes usb mass-storage devices no longer working after a "usb reset" Signed-off-by: Hans de Goede Acked-by: Ian Campbell diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c index e8a3a23..42c6725 100644 --- a/drivers/usb/musb-new/sunxi.c +++ b/drivers/usb/musb-new/sunxi.c @@ -157,6 +157,17 @@ static void USBC_ForceIdToHigh(__iomem void *base) musb_writel(base, USBC_REG_o_ISCR, reg_val); } +static void USBC_ForceVbusValidToLow(__iomem void *base) +{ + u32 reg_val; + + reg_val = musb_readl(base, USBC_REG_o_ISCR); + reg_val &= ~(0x03 << USBC_BP_ISCR_FORCE_VBUS_VALID); + reg_val |= (0x02 << USBC_BP_ISCR_FORCE_VBUS_VALID); + reg_val = USBC_WakeUp_ClearChangeDetect(reg_val); + musb_writel(base, USBC_REG_o_ISCR, reg_val); +} + static void USBC_ForceVbusValidToHigh(__iomem void *base) { u32 reg_val; @@ -205,42 +216,41 @@ static irqreturn_t sunxi_musb_interrupt(int irq, void *__hci) return retval; } +/* musb_core does not call enable / disable in a balanced manner */ +static bool enabled = false; + static void sunxi_musb_enable(struct musb *musb) { pr_debug("%s():\n", __func__); + if (enabled) + return; + /* select PIO mode */ musb_writeb(musb->mregs, USBC_REG_o_VEND0, 0); - if (is_host_enabled(musb)) { - /* port power on */ - sunxi_usb_phy_power_on(0); - } + if (is_host_enabled(musb)) + sunxi_usb_phy_power_on(0); /* port power on */ + + USBC_ForceVbusValidToHigh(musb->mregs); + + enabled = true; } static void sunxi_musb_disable(struct musb *musb) { - struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - pr_debug("%s():\n", __func__); - /* Put the controller back in a pristane state for "usb reset" */ - if (musb->is_active) { - sunxi_usb_phy_exit(0); -#ifdef CONFIG_SUNXI_GEN_SUN6I - clrbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_GATE_OFFSET_USB0); -#endif - clrbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_USB0); + if (!enabled) + return; - mdelay(10); + if (is_host_enabled(musb)) + sunxi_usb_phy_power_off(0); /* port power off */ - setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_USB0); -#ifdef CONFIG_SUNXI_GEN_SUN6I - setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_GATE_OFFSET_USB0); -#endif - sunxi_usb_phy_init(0); - musb->is_active = 0; - } + USBC_ForceVbusValidToLow(musb->mregs); + mdelay(200); /* Wait for the current session to timeout */ + + enabled = false; } static int sunxi_musb_init(struct musb *musb) -- cgit v0.10.2 From 998b8ab3f61ba3a907a5694cedf81f4cf10b0b5a Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 14 Jun 2015 11:58:43 +0200 Subject: sunxi: musb: Remove unused sunxi_musb_exit method Remove the unused sunxi_musb_exit method, there is no code in u-boot calling the exit method, and our implementation was broken as it did not disable the clocks and asserted reset. Signed-off-by: Hans de Goede Acked-by: Ian Campbell diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c index 42c6725..052e065 100644 --- a/drivers/usb/musb-new/sunxi.c +++ b/drivers/usb/musb-new/sunxi.c @@ -105,16 +105,6 @@ static void USBC_EnableIdPullUp(__iomem void *base) musb_writel(base, USBC_REG_o_ISCR, reg_val); } -static void USBC_DisableIdPullUp(__iomem void *base) -{ - u32 reg_val; - - reg_val = musb_readl(base, USBC_REG_o_ISCR); - reg_val &= ~(1 << USBC_BP_ISCR_ID_PULLUP_EN); - reg_val = USBC_WakeUp_ClearChangeDetect(reg_val); - musb_writel(base, USBC_REG_o_ISCR, reg_val); -} - static void USBC_EnableDpDmPullUp(__iomem void *base) { u32 reg_val; @@ -125,16 +115,6 @@ static void USBC_EnableDpDmPullUp(__iomem void *base) musb_writel(base, USBC_REG_o_ISCR, reg_val); } -static void USBC_DisableDpDmPullUp(__iomem void *base) -{ - u32 reg_val; - - reg_val = musb_readl(base, USBC_REG_o_ISCR); - reg_val &= ~(1 << USBC_BP_ISCR_DPDM_PULLUP_EN); - reg_val = USBC_WakeUp_ClearChangeDetect(reg_val); - musb_writel(base, USBC_REG_o_ISCR, reg_val); -} - static void USBC_ForceIdToLow(__iomem void *base) { u32 reg_val; @@ -292,22 +272,8 @@ static int sunxi_musb_init(struct musb *musb) return 0; } -static int sunxi_musb_exit(struct musb *musb) -{ - pr_debug("%s():\n", __func__); - - USBC_DisableDpDmPullUp(musb->mregs); - USBC_DisableIdPullUp(musb->mregs); - sunxi_usb_phy_power_off(0); - sunxi_usb_phy_exit(0); - - return 0; -} - const struct musb_platform_ops sunxi_musb_ops = { .init = sunxi_musb_init, - .exit = sunxi_musb_exit, - .enable = sunxi_musb_enable, .disable = sunxi_musb_disable, }; -- cgit v0.10.2 From fc175434f97d5db518fb6e9a9bfec85e6c166603 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 14 Jun 2015 16:53:15 +0200 Subject: sun6i: cpu_reset: Do not return from cpu_reset() Currently on sun6i after a "reset" the prompt returns and the user can even type stuff until the watchdog triggers and does the actual reset. This is somewhat unexpected behavior for the "reset" command, this commit adds an endless loop to wait for the watchdog to trigger so that we do not return to the prompt. Signed-off-by: Hans de Goede Acked-by: Ian Campbell diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index 4b2494e..8a4770b 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -202,6 +202,7 @@ void reset_cpu(ulong addr) writel(WDT_CFG_RESET, &wdog->cfg); writel(WDT_MODE_EN, &wdog->mode); writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl); + while (1) { } #endif } -- cgit v0.10.2 From 24e741269605ff7f073e83294852dd16edcd22c0 Mon Sep 17 00:00:00 2001 From: Karsten Merker Date: Sun, 14 Jun 2015 12:08:42 +0200 Subject: MSI_Primo81_defconfig: enable USB OTG port and keyboard support The MSI Primo 81 is an Allwinner A31s-based tablet on which the OTG port is the only accessible USB interface. The existing defconfig had VGA console on the LCD enabled, but was missing keyboard support because the prerequisites for that (sunxi MUSB support and AXP221 GPIO support) had not been available before. All previously missing dependencies are available now, so this patch enables keyboard support and its prerequisites in the defconfig. Signed-off-by: Karsten Merker Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig index 83a95cb..e6888a1 100644 --- a/configs/MSI_Primo81_defconfig +++ b/configs/MSI_Primo81_defconfig @@ -17,3 +17,7 @@ CONFIG_VIDEO_LCD_SPI_CS="PH9" CONFIG_VIDEO_LCD_SPI_SCLK="PH10" CONFIG_VIDEO_LCD_SPI_MOSI="PH11" CONFIG_VIDEO_LCD_SPI_MISO="PH12" +CONFIG_AXP_GPIO=y +CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" +CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" +CONFIG_USB_MUSB_SUNXI=y -- cgit v0.10.2 From c07361145ff9a28e129a5ef49213cf2beba911e5 Mon Sep 17 00:00:00 2001 From: Jeroen Hofstee Date: Sat, 30 May 2015 10:11:23 +0200 Subject: omap_gpmc: move prefetch out of CONFIG_NAND_OMAP_ELM The prefech mode is a feature of the gpmc, not the ELM. An am3517 does not have an elm, but can do prefeches, so move the code out of the CONFIG_NAND_OMAP_ELM ifdef. Cc: Scott Wood Cc: Tom Rini Cc: Daniel Mack Signed-off-by: Jeroen Hofstee Reviewed-by: Tom Rini diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c index 610f969..de90d55 100644 --- a/drivers/mtd/nand/omap_gpmc.c +++ b/drivers/mtd/nand/omap_gpmc.c @@ -340,6 +340,115 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat, return 0; } +#ifdef CONFIG_NAND_OMAP_GPMC_PREFETCH + +#define PREFETCH_CONFIG1_CS_SHIFT 24 +#define PREFETCH_FIFOTHRESHOLD_MAX 0x40 +#define PREFETCH_FIFOTHRESHOLD(val) ((val) << 8) +#define PREFETCH_STATUS_COUNT(val) (val & 0x00003fff) +#define PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F) +#define ENABLE_PREFETCH (1 << 7) + +/** + * omap_prefetch_enable - configures and starts prefetch transfer + * @fifo_th: fifo threshold to be used for read/ write + * @count: number of bytes to be transferred + * @is_write: prefetch read(0) or write post(1) mode + * @cs: chip select to use + */ +static int omap_prefetch_enable(int fifo_th, unsigned int count, int is_write, int cs) +{ + uint32_t val; + + if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) + return -EINVAL; + + if (readl(&gpmc_cfg->prefetch_control)) + return -EBUSY; + + /* Set the amount of bytes to be prefetched */ + writel(count, &gpmc_cfg->prefetch_config2); + + val = (cs << PREFETCH_CONFIG1_CS_SHIFT) | (is_write & 1) | + PREFETCH_FIFOTHRESHOLD(fifo_th) | ENABLE_PREFETCH; + writel(val, &gpmc_cfg->prefetch_config1); + + /* Start the prefetch engine */ + writel(1, &gpmc_cfg->prefetch_control); + + return 0; +} + +/** + * omap_prefetch_reset - disables and stops the prefetch engine + */ +static void omap_prefetch_reset(void) +{ + writel(0, &gpmc_cfg->prefetch_control); + writel(0, &gpmc_cfg->prefetch_config1); +} + +static int __read_prefetch_aligned(struct nand_chip *chip, uint32_t *buf, int len) +{ + int ret; + uint32_t cnt; + struct omap_nand_info *info = chip->priv; + + ret = omap_prefetch_enable(PREFETCH_FIFOTHRESHOLD_MAX, len, 0, info->cs); + if (ret < 0) + return ret; + + do { + int i; + + cnt = readl(&gpmc_cfg->prefetch_status); + cnt = PREFETCH_STATUS_FIFO_CNT(cnt); + + for (i = 0; i < cnt / 4; i++) { + *buf++ = readl(CONFIG_SYS_NAND_BASE); + len -= 4; + } + } while (len); + + omap_prefetch_reset(); + + return 0; +} + +static void omap_nand_read_prefetch8(struct mtd_info *mtd, uint8_t *buf, int len) +{ + int ret; + uint32_t head, tail; + struct nand_chip *chip = mtd->priv; + + /* + * If the destination buffer is unaligned, start with reading + * the overlap byte-wise. + */ + head = ((uint32_t) buf) % 4; + if (head) { + nand_read_buf(mtd, buf, head); + buf += head; + len -= head; + } + + /* + * Only transfer multiples of 4 bytes in a pre-fetched fashion. + * If there's a residue, care for it byte-wise afterwards. + */ + tail = len % 4; + + ret = __read_prefetch_aligned(chip, (uint32_t *) buf, len - tail); + if (ret < 0) { + /* fallback in case the prefetch engine is busy */ + nand_read_buf(mtd, buf, len); + } else if (tail) { + buf += len - tail; + nand_read_buf(mtd, buf, tail); + } +} +#endif /* CONFIG_NAND_OMAP_GPMC_PREFETCH */ + #ifdef CONFIG_NAND_OMAP_ELM /* * omap_reverse_list - re-orders list elements in reverse order [internal] @@ -452,115 +561,6 @@ static int omap_correct_data_bch(struct mtd_info *mtd, uint8_t *dat, return (err) ? err : error_count; } -#ifdef CONFIG_NAND_OMAP_GPMC_PREFETCH - -#define PREFETCH_CONFIG1_CS_SHIFT 24 -#define PREFETCH_FIFOTHRESHOLD_MAX 0x40 -#define PREFETCH_FIFOTHRESHOLD(val) ((val) << 8) -#define PREFETCH_STATUS_COUNT(val) (val & 0x00003fff) -#define PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F) -#define ENABLE_PREFETCH (1 << 7) - -/** - * omap_prefetch_enable - configures and starts prefetch transfer - * @fifo_th: fifo threshold to be used for read/ write - * @count: number of bytes to be transferred - * @is_write: prefetch read(0) or write post(1) mode - * @cs: chip select to use - */ -static int omap_prefetch_enable(int fifo_th, unsigned int count, int is_write, int cs) -{ - uint32_t val; - - if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) - return -EINVAL; - - if (readl(&gpmc_cfg->prefetch_control)) - return -EBUSY; - - /* Set the amount of bytes to be prefetched */ - writel(count, &gpmc_cfg->prefetch_config2); - - val = (cs << PREFETCH_CONFIG1_CS_SHIFT) | (is_write & 1) | - PREFETCH_FIFOTHRESHOLD(fifo_th) | ENABLE_PREFETCH; - writel(val, &gpmc_cfg->prefetch_config1); - - /* Start the prefetch engine */ - writel(1, &gpmc_cfg->prefetch_control); - - return 0; -} - -/** - * omap_prefetch_reset - disables and stops the prefetch engine - */ -static void omap_prefetch_reset(void) -{ - writel(0, &gpmc_cfg->prefetch_control); - writel(0, &gpmc_cfg->prefetch_config1); -} - -static int __read_prefetch_aligned(struct nand_chip *chip, uint32_t *buf, int len) -{ - int ret; - uint32_t cnt; - struct omap_nand_info *info = chip->priv; - - ret = omap_prefetch_enable(PREFETCH_FIFOTHRESHOLD_MAX, len, 0, info->cs); - if (ret < 0) - return ret; - - do { - int i; - - cnt = readl(&gpmc_cfg->prefetch_status); - cnt = PREFETCH_STATUS_FIFO_CNT(cnt); - - for (i = 0; i < cnt / 4; i++) { - *buf++ = readl(CONFIG_SYS_NAND_BASE); - len -= 4; - } - } while (len); - - omap_prefetch_reset(); - - return 0; -} - -static void omap_nand_read_prefetch8(struct mtd_info *mtd, uint8_t *buf, int len) -{ - int ret; - uint32_t head, tail; - struct nand_chip *chip = mtd->priv; - - /* - * If the destination buffer is unaligned, start with reading - * the overlap byte-wise. - */ - head = ((uint32_t) buf) % 4; - if (head) { - nand_read_buf(mtd, buf, head); - buf += head; - len -= head; - } - - /* - * Only transfer multiples of 4 bytes in a pre-fetched fashion. - * If there's a residue, care for it byte-wise afterwards. - */ - tail = len % 4; - - ret = __read_prefetch_aligned(chip, (uint32_t *) buf, len - tail); - if (ret < 0) { - /* fallback in case the prefetch engine is busy */ - nand_read_buf(mtd, buf, len); - } else if (tail) { - buf += len - tail; - nand_read_buf(mtd, buf, tail); - } -} -#endif /* CONFIG_NAND_OMAP_GPMC_PREFETCH */ - /** * omap_read_page_bch - hardware ecc based page read function * @mtd: mtd info structure -- cgit v0.10.2 From cb2fc338f8a877564cfc22a72714fade01f83c1d Mon Sep 17 00:00:00 2001 From: Jeroen Hofstee Date: Sat, 30 May 2015 10:11:24 +0200 Subject: mtd: OMAP: Enable GPMC prefetch mode for 16 bit access commit c316f57 "mtd: OMAP: Enable GPMC prefetch mode" only enabled prefetch mode for 8 bit nand access, this adds 16 bit as well. Cc: Scott Wood Cc: Tom Rini Cc: Daniel Mack Signed-off-by: Jeroen Hofstee Reviewed-by: Tom Rini diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c index de90d55..4372988 100644 --- a/drivers/mtd/nand/omap_gpmc.c +++ b/drivers/mtd/nand/omap_gpmc.c @@ -415,7 +415,17 @@ static int __read_prefetch_aligned(struct nand_chip *chip, uint32_t *buf, int le return 0; } -static void omap_nand_read_prefetch8(struct mtd_info *mtd, uint8_t *buf, int len) +static inline void omap_nand_read(struct mtd_info *mtd, uint8_t *buf, int len) +{ + struct nand_chip *chip = mtd->priv; + + if (chip->options & NAND_BUSWIDTH_16) + nand_read_buf16(mtd, buf, len); + else + nand_read_buf(mtd, buf, len); +} + +static void omap_nand_read_prefetch(struct mtd_info *mtd, uint8_t *buf, int len) { int ret; uint32_t head, tail; @@ -427,7 +437,7 @@ static void omap_nand_read_prefetch8(struct mtd_info *mtd, uint8_t *buf, int len */ head = ((uint32_t) buf) % 4; if (head) { - nand_read_buf(mtd, buf, head); + omap_nand_read(mtd, buf, head); buf += head; len -= head; } @@ -438,13 +448,13 @@ static void omap_nand_read_prefetch8(struct mtd_info *mtd, uint8_t *buf, int len */ tail = len % 4; - ret = __read_prefetch_aligned(chip, (uint32_t *) buf, len - tail); + ret = __read_prefetch_aligned(chip, (uint32_t *)buf, len - tail); if (ret < 0) { /* fallback in case the prefetch engine is busy */ - nand_read_buf(mtd, buf, len); + omap_nand_read(mtd, buf, len); } else if (tail) { buf += len - tail; - nand_read_buf(mtd, buf, tail); + omap_nand_read(mtd, buf, tail); } } #endif /* CONFIG_NAND_OMAP_GPMC_PREFETCH */ @@ -1011,13 +1021,11 @@ int board_nand_init(struct nand_chip *nand) if (err) return err; - /* TODO: Implement for 16-bit bus width */ - if (nand->options & NAND_BUSWIDTH_16) - nand->read_buf = nand_read_buf16; #ifdef CONFIG_NAND_OMAP_GPMC_PREFETCH - else - nand->read_buf = omap_nand_read_prefetch8; + nand->read_buf = omap_nand_read_prefetch; #else + if (nand->options & NAND_BUSWIDTH_16) + nand->read_buf = nand_read_buf16; else nand->read_buf = nand_read_buf; #endif -- cgit v0.10.2 From 817aa32b933f4a37e5da45f795e8c3338b8fd9df Mon Sep 17 00:00:00 2001 From: Jeroen Hofstee Date: Sat, 30 May 2015 10:11:25 +0200 Subject: boards: tam3517-common: enable gpmc prefetch mode Since the tam3517 base board has a 16bit wide nand connected to the gpmc, enable the prefetch mode, since that is now supported. Cc: Scott Wood Cc: Tom Rini Cc: pekon gupta Cc: Nishanth Menon Cc: Daniel Mack Cc: Tapani Utriainen Signed-off-by: Jeroen Hofstee Reviewed-by: Tom Rini diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 30bc2be..af5cca6 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -260,6 +260,7 @@ #define CONFIG_SYS_NAND_ECCSIZE 256 #define CONFIG_SYS_NAND_ECCBYTES 3 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_SW +#define CONFIG_NAND_OMAP_GPMC_PREFETCH #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -- cgit v0.10.2 From 60480f812121d9ad29f28503e8c0f6f2728757c7 Mon Sep 17 00:00:00 2001 From: "Cooper Jr., Franklin" Date: Wed, 10 Jun 2015 08:54:02 -0500 Subject: ti: am335x/am437x/omap5 devices: Fix breakage when CONFIG_CMD_NET is not used Currently there is no default value for NETARGS if CONFIG_CMD_NET=y isn't set. This results in build errors which was first discovered when trying to run make env. By defining a blank NETARGS these errors can be avoided. Signed-off-by: Franklin S Cooper Jr Tested-by: Maxin B. John Reviewed-by: Tom Rini diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index f882942..d1c390f 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -301,7 +301,8 @@ "run netloadfdt; " \ "run netargs; " \ "bootz ${loadaddr} - ${fdtaddr}\0" - +#else +#define NETARGS "" #endif #endif /* __CONFIG_TI_ARMV7_COMMON_H__ */ -- cgit v0.10.2 From 9b63ba37274317520bd8752607476dbcce0f8213 Mon Sep 17 00:00:00 2001 From: Hannes Petermaier Date: Thu, 11 Jun 2015 12:25:43 +0200 Subject: board/BuR/common: support timer5 for pwm-backlight in future we support yet another b&r am335x based board, where Timer 5 is wired to backlight-driver. So we introduce a new driver-type '2' to setup timer5 instead timer6. Signed-off-by: Hannes Schmelzer Reviewed-by: Simon Glass diff --git a/board/BuR/common/common.c b/board/BuR/common/common.c index 7830d1a..441465c 100644 --- a/board/BuR/common/common.c +++ b/board/BuR/common/common.c @@ -64,8 +64,7 @@ void lcdbacklight(int on) unsigned int pwmfrq = getenv_ulong("ds1_pwmfreq", 10, ~0UL); #endif unsigned int tmp; - - struct gptimer *const timerhw = (struct gptimer *)DM_TIMER6_BASE; + struct gptimer *timerhw; if (on) bright = bright != ~0UL ? bright : 50; @@ -73,6 +72,14 @@ void lcdbacklight(int on) bright = 0; switch (driver) { + case 2: + timerhw = (struct gptimer *)DM_TIMER5_BASE; + break; + default: + timerhw = (struct gptimer *)DM_TIMER6_BASE; + } + + switch (driver) { case 0: /* PMIC LED-Driver */ /* brightness level */ tps65217_reg_write(TPS65217_PROT_LEVEL_NONE, @@ -83,7 +90,8 @@ void lcdbacklight(int on) bright != 0 ? 0x0A : 0x02, 0xFF); break; - case 1: /* PWM using timer6 */ + case 1: + case 2: /* PWM using timer */ if (pwmfrq != ~0UL) { timerhw->tiocp_cfg = TCFG_RESET; udelay(10); -- cgit v0.10.2 From 14ec12fa6f3da065842a3428f6cd620f04abcd58 Mon Sep 17 00:00:00 2001 From: Hannes Petermaier Date: Thu, 11 Jun 2015 12:31:54 +0200 Subject: board/BuR/tseries: remove lpj= from environment-variable since we have now various processor-speeds it isn't useful anymore to preinitialize kernels-delay loop. Rather we want the kernel to calibrate it on every boot. This wastes around 80ms boottime but is compatible to all CPU-speeds. Signed-off-by: Hannes Schmelzer diff --git a/include/configs/tseries.h b/include/configs/tseries.h index f3f71f1..cd8ba2b 100644 --- a/include/configs/tseries.h +++ b/include/configs/tseries.h @@ -162,7 +162,7 @@ BUR_COMMON_ENV \ "kernel=zImage\0" \ "ramdisk=rootfs.cpio.uboot\0" \ "console=ttyO0,115200n8\0" \ -"optargs=consoleblank=0 quiet lpj=1191936 panic=2\0" \ +"optargs=consoleblank=0 quiet panic=2\0" \ "nfsroot=/tftpboot/tseries/rootfs-small\0" \ "nfsopts=nolock\0" \ "ramargs=setenv bootargs ${optargs} console=${console} root=/dev/ram0\0" \ -- cgit v0.10.2 From 180f87fcc58936fb8d9e5a6babce739666c50b13 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Thu, 11 Jun 2015 20:53:31 -0400 Subject: mmc_write.c: Make mmc_berase do 32bit safe 64bit math We want to see if the requested start or total block count are unaligned. We discard the whole numbers and only care about the remainder. Update the code to use div_u64_rem here and add a comment. Cc: Hans de Goede Cc: Pantelis Antoniou Cc: Bernhard Nortmann Reported-by: Simon Glass Signed-off-by: Tom Rini Tested-by: Bernhard Nortmann Reviewed-by: Hans de Goede diff --git a/drivers/mmc/mmc_write.c b/drivers/mmc/mmc_write.c index 3db9669..7aea7e9 100644 --- a/drivers/mmc/mmc_write.c +++ b/drivers/mmc/mmc_write.c @@ -10,6 +10,8 @@ #include #include #include +#include +#include #include "mmc_private.h" static ulong mmc_erase_t(struct mmc *mmc, ulong start, lbaint_t blkcnt) @@ -66,6 +68,7 @@ err_out: unsigned long mmc_berase(int dev_num, lbaint_t start, lbaint_t blkcnt) { int err = 0; + u32 start_rem, blkcnt_rem; struct mmc *mmc = find_mmc_device(dev_num); lbaint_t blk = 0, blk_r = 0; int timeout = 1000; @@ -73,7 +76,14 @@ unsigned long mmc_berase(int dev_num, lbaint_t start, lbaint_t blkcnt) if (!mmc) return -1; - if ((start % mmc->erase_grp_size) || (blkcnt % mmc->erase_grp_size)) + /* + * We want to see if the requested start or total block count are + * unaligned. We discard the whole numbers and only care about the + * remainder. + */ + err = div_u64_rem(start, mmc->erase_grp_size, &start_rem); + err = div_u64_rem(blkcnt, mmc->erase_grp_size, &blkcnt_rem); + if (start_rem || blkcnt_rem) printf("\n\nCaution! Your devices Erase group is 0x%x\n" "The erase range would be change to " "0x" LBAF "~0x" LBAF "\n\n", -- cgit v0.10.2 From 7eee2b500da1af93981c8117dff1d8a135ce30e7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C5=81ukasz=20Majewski?= Date: Wed, 17 Jun 2015 12:49:23 +0200 Subject: fix: samsung: common: autoboot.cmd: Correct itbcfg definition This fix is necessary to avoid booting the default ITB configuration. Signed-off-by: Lukasz Majewski diff --git a/board/samsung/common/bootscripts/autoboot.cmd b/board/samsung/common/bootscripts/autoboot.cmd index 3b40156..1faed8b 100644 --- a/board/samsung/common/bootscripts/autoboot.cmd +++ b/board/samsung/common/bootscripts/autoboot.cmd @@ -42,7 +42,7 @@ if test -e '${boardname}'; then setenv initrd_addr ; setenv kerneladdr 0x42000000; setenv kernelname Image.itb; - setenv itbcfg \#'${boardname}'; + setenv itbcfg "\"#${boardname}\""; setenv imgbootcmd bootm; else echo Warning! Variable: \$boardname is undefined!; -- cgit v0.10.2 From 0b367380a52ac36b552d40ed1b10064d894e35a9 Mon Sep 17 00:00:00 2001 From: Peter Robinson Date: Wed, 17 Jun 2015 16:58:32 +0100 Subject: tools/env/fw_env.h: Correct include order When building tools-only (or env) we need to be sure that we do use and do not use . This will fix problems such as running 'make defconfig' or 'make sandbox_config' and then 'make tools-only'. Based on the responses below to the thread add linux/kconfig.h higher in the includes and drop the now unneeded autoconf.h lower down to ensure the default environment is included correctly http://lists.denx.de/pipermail/u-boot/2015-June/216849.html Signed-off-by: Peter Robinson diff --git a/tools/env/fw_env.h b/tools/env/fw_env.h index d6faf34..60c0517 100644 --- a/tools/env/fw_env.h +++ b/tools/env/fw_env.h @@ -6,6 +6,8 @@ */ /* Pull in the current config to define the default environment */ +#include + #ifndef __ASSEMBLY__ #define __ASSEMBLY__ /* get only #defines from config.h */ #include @@ -13,7 +15,6 @@ #else #include #endif -#include /* * To build the utility with the static configuration -- cgit v0.10.2 From 1ec264695f746dd033a14762344aefff0aa3e3b5 Mon Sep 17 00:00:00 2001 From: Paul Kocialkowski Date: Wed, 3 Jun 2015 18:48:51 +0200 Subject: spl: spl_mmc: Minor cosmetics This switches some printf calls to puts and avoids a test repetition. Signed-off-by: Paul Kocialkowski diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c index de495c0..f5ac844 100644 --- a/common/spl/spl_mmc.c +++ b/common/spl/spl_mmc.c @@ -43,13 +43,12 @@ static int mmc_load_image_raw_sector(struct mmc *mmc, unsigned long sector) (void *) spl_image.load_addr); end: + if (count == 0) { #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT - if (count == 0) - printf("spl: mmc block read error\n"); + puts("spl: mmc block read error\n"); #endif - - if (count == 0) return -1; + } return 0; } @@ -63,7 +62,7 @@ static int mmc_load_image_raw_partition(struct mmc *mmc, int partition) err = get_partition_info(&mmc->block_dev, partition, &info); if (err) { #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT - printf("spl: partition error\n"); + puts("spl: partition error\n"); #endif return -1; } @@ -83,7 +82,7 @@ static int mmc_load_image_raw_os(struct mmc *mmc) (void *) CONFIG_SYS_SPL_ARGS_ADDR); if (count == 0) { #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT - printf("spl: mmc block read error\n"); + puts("spl: mmc block read error\n"); #endif return -1; } -- cgit v0.10.2 From 3ae8f4c8ae7b745ff3f881dce3d22f636528fc5f Mon Sep 17 00:00:00 2001 From: Paul Kocialkowski Date: Mon, 8 Jun 2015 23:05:09 +0200 Subject: spl: spl_mmc: MMC boot mode provisions checks This allows using only one of either raw or fs mode for SPL mmc boot, without the need to have provisions for the other. In particular, a device may have U-Boot installed on a file system on the mmc, without ever needing to read U-Boot from raw memory. Thus, there is no reason to provide a sector or partition for raw mode. This allows this behaviour and still provides a robust fallback mechanism in case provisions for both modes are defined. Signed-off-by: Paul Kocialkowski diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c index f5ac844..552f80d 100644 --- a/common/spl/spl_mmc.c +++ b/common/spl/spl_mmc.c @@ -130,19 +130,21 @@ void spl_mmc_load_image(void) return; } #endif -#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION +#if defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION) err = mmc_load_image_raw_partition(mmc, CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION); -#else + if (!err) + return; +#elif defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR) err = mmc_load_image_raw_sector(mmc, CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR); -#endif if (!err) return; -#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT) +#endif case MMCSD_MODE_FS: debug("spl: mmc boot mode: fs\n"); +#ifdef CONFIG_SYS_MMCSD_FS_BOOT_PARTITION #ifdef CONFIG_SPL_FAT_SUPPORT #ifdef CONFIG_SPL_OS_BOOT if (!spl_start_uboot()) { @@ -152,12 +154,14 @@ void spl_mmc_load_image(void) return; } #endif +#ifdef CONFIG_SPL_FS_LOAD_PAYLOAD_NAME err = spl_load_image_fat(&mmc->block_dev, CONFIG_SYS_MMCSD_FS_BOOT_PARTITION, CONFIG_SPL_FS_LOAD_PAYLOAD_NAME); if (!err) return; #endif +#endif #ifdef CONFIG_SPL_EXT_SUPPORT #ifdef CONFIG_SPL_OS_BOOT if (!spl_start_uboot()) { @@ -167,6 +171,7 @@ void spl_mmc_load_image(void) return; } #endif +#ifdef CONFIG_SPL_FS_LOAD_PAYLOAD_NAME err = spl_load_image_ext(&mmc->block_dev, CONFIG_SYS_MMCSD_FS_BOOT_PARTITION, CONFIG_SPL_FS_LOAD_PAYLOAD_NAME); @@ -174,6 +179,7 @@ void spl_mmc_load_image(void) return; #endif #endif +#endif #ifdef CONFIG_SUPPORT_EMMC_BOOT case MMCSD_MODE_EMMCBOOT: /* @@ -200,16 +206,18 @@ void spl_mmc_load_image(void) return; } #endif -#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION +#if defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION) err = mmc_load_image_raw_partition(mmc, CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION); -#else + if (!err) + return; +#elif defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR) err = mmc_load_image_raw_sector(mmc, CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR); -#endif if (!err) return; #endif +#endif case MMCSD_MODE_UNDEFINED: default: #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT -- cgit v0.10.2 From c6265f7f3410b5e5763181cdd123a3f6fcd9fd58 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Tue, 2 Jun 2015 11:12:20 -0400 Subject: CPCI4052: Remove CONFIG_SYS_LONGHELP With the change to make sure that CONFIG_CMD_NET is enabled this board no longer fits into the linker script: powerpc-linux-ld.bfd: section .resetvec loaded at [fffffffc,ffffffff] overlaps section .u_boot_list loaded at [ffffff58,00000723] powerpc-linux-ld.bfd: u-boot: section .resetvec lma 0xfffffffc adjusted to 0x724 powerpc-linux-ld.bfd: u-boot: section `.resetvec' can't be allocated in segment 0 LOAD: .data.init .text .rodata .reloc .data .u_boot_list .resetvec powerpc-linux-ld.bfd: final link failed: File truncated Drop CONFIG_SYS_LONGHELP to free up space. Cc: Matthias Fuchs Signed-off-by: Tom Rini diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index c20ecbd..019700d 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -94,7 +94,7 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#undef CONFIG_SYS_LONGHELP /* undef to save memory */ #undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -- cgit v0.10.2 From b335fe681075bd6bd3e6842bad12a0ccb573dc4f Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 10 Jun 2015 17:04:04 +0200 Subject: usb.h: Always declare usb function prototypes There is no harm in declaring the function prototypes even if nothing implements them, and when CONFIG_DM_USB=y the various usb functions are available regardless of any controller drivers being enabled. This fixes compile warnings due to missing prototypes on ARCHs where the ARCH Kconfig always enables CONFIG_DM_USB and various usb drivers. One could argue that in the case of no controllers CONFIG_DM_USB should not be set, but this problem is typically seen during bringup of boards which do actually have usb controllers. Signed-off-by: Hans de Goede diff --git a/include/usb.h b/include/usb.h index c709ce2..dca512d 100644 --- a/include/usb.h +++ b/include/usb.h @@ -171,17 +171,6 @@ enum usb_init_type { * this is how the lowlevel part communicate with the outer world */ -#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || \ - defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_OHCI_NEW) || \ - defined(CONFIG_USB_SL811HS) || defined(CONFIG_USB_ISP116X_HCD) || \ - defined(CONFIG_USB_R8A66597_HCD) || defined(CONFIG_USB_DAVINCI) || \ - defined(CONFIG_USB_OMAP3) || defined(CONFIG_USB_DA8XX) || \ - defined(CONFIG_USB_BLACKFIN) || defined(CONFIG_USB_AM35X) || \ - defined(CONFIG_USB_MUSB_DSPS) || defined(CONFIG_USB_MUSB_AM35X) || \ - defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined(CONFIG_USB_MUSB_SUNXI) || \ - defined(CONFIG_USB_XHCI) || defined(CONFIG_USB_DWC2) || \ - defined(CONFIG_USB_EMUL) - int usb_lowlevel_init(int index, enum usb_init_type init, void **controller); int usb_lowlevel_stop(int index); @@ -216,12 +205,8 @@ void *poll_int_queue(struct usb_device *dev, struct int_queue *queue); * in boards init functions e.g. udc_disconnect() used for * forced device disconnection from host. */ -#elif defined(CONFIG_USB_GADGET_PXA2XX) - extern void udc_disconnect(void); -#endif - /* * board-specific hardware initialization, called by * usb drivers and u-boot commands -- cgit v0.10.2 From 7f59d16a50ca7e6d417c9408b91ab2f97eff0a36 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 18 Jun 2015 22:34:33 +0200 Subject: usb: ehci: Properly deal with data toggle for interrupt endpoints Without this we loose every other interrupt packet. We never noticed this because with keyboards the packets which we were loosing would normally be key release packets. But now that we do keyrepeat in software instead of relying on the hid idle functionality, missing a release will result in key repeat triggering. This commit fixes this. Signed-off-by: Hans de Goede diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 1e5a6e2..bf02221 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1214,6 +1214,7 @@ static int _ehci_submit_control_msg(struct usb_device *dev, unsigned long pipe, struct int_queue { int elementsize; + unsigned long pipe; struct QH *first; struct QH *current; struct QH *last; @@ -1269,7 +1270,7 @@ static struct int_queue *_ehci_create_int_queue(struct usb_device *dev, { struct ehci_ctrl *ctrl = ehci_get_ctrl(dev); struct int_queue *result = NULL; - int i; + uint32_t i, toggle; /* * Interrupt transfers requiring several transactions are not supported @@ -1309,6 +1310,7 @@ static struct int_queue *_ehci_create_int_queue(struct usb_device *dev, goto fail1; } result->elementsize = elementsize; + result->pipe = pipe; result->first = memalign(USB_DMA_MINALIGN, sizeof(struct QH) * queuesize); if (!result->first) { @@ -1326,6 +1328,8 @@ static struct int_queue *_ehci_create_int_queue(struct usb_device *dev, memset(result->first, 0, sizeof(struct QH) * queuesize); memset(result->tds, 0, sizeof(struct qTD) * queuesize); + toggle = usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)); + for (i = 0; i < queuesize; i++) { struct QH *qh = result->first + i; struct qTD *td = result->tds + i; @@ -1357,7 +1361,9 @@ static struct int_queue *_ehci_create_int_queue(struct usb_device *dev, td->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); debug("communication direction is '%s'\n", usb_pipein(pipe) ? "in" : "out"); - td->qt_token = cpu_to_hc32((elementsize << 16) | + td->qt_token = cpu_to_hc32( + QT_TOKEN_DT(toggle) | + (elementsize << 16) | ((usb_pipein(pipe) ? 1 : 0) << 8) | /* IN/OUT token */ 0x80); /* active */ td->qt_buffer[0] = @@ -1372,6 +1378,7 @@ static struct int_queue *_ehci_create_int_queue(struct usb_device *dev, cpu_to_hc32((td->qt_buffer[0] + 0x4000) & ~0xfff); *buf = buffer + i * elementsize; + toggle ^= 1; } flush_dcache_range((unsigned long)buffer, @@ -1426,6 +1433,8 @@ static void *_ehci_poll_int_queue(struct usb_device *dev, { struct QH *cur = queue->current; struct qTD *cur_td; + uint32_t token, toggle; + unsigned long pipe = queue->pipe; /* depleted queue */ if (cur == NULL) { @@ -1436,12 +1445,15 @@ static void *_ehci_poll_int_queue(struct usb_device *dev, cur_td = &queue->tds[queue->current - queue->first]; invalidate_dcache_range((unsigned long)cur_td, ALIGN_END_ADDR(struct qTD, cur_td, 1)); - if (QT_TOKEN_GET_STATUS(hc32_to_cpu(cur_td->qt_token)) & - QT_TOKEN_STATUS_ACTIVE) { - debug("Exit poll_int_queue with no completed intr transfer. token is %x\n", - hc32_to_cpu(cur_td->qt_token)); + token = hc32_to_cpu(cur_td->qt_token); + if (QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE) { + debug("Exit poll_int_queue with no completed intr transfer. token is %x\n", token); return NULL; } + + toggle = QT_TOKEN_GET_DT(token); + usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), toggle); + if (!(cur->qh_link & QH_LINK_TERMINATE)) queue->current++; else @@ -1452,7 +1464,7 @@ static void *_ehci_poll_int_queue(struct usb_device *dev, queue->elementsize)); debug("Exit poll_int_queue with completed intr transfer. token is %x at %p (first at %p)\n", - hc32_to_cpu(cur_td->qt_token), cur, queue->first); + token, cur, queue->first); return cur->buffer; } -- cgit v0.10.2 From de451493f1b6dfcc572763be421500754bfc6b2f Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 18 Jun 2015 22:34:34 +0200 Subject: usb: kbd: Disable idle input reports when we do not need them When we're polling and thus handling key-repeat in software, make sure to disable idle reports, some keyboards may have these enabled by default messing up our software keyrepeat. Signed-off-by: Hans de Goede diff --git a/common/usb_kbd.c b/common/usb_kbd.c index 49bfc09..e2af67d 100644 --- a/common/usb_kbd.c +++ b/common/usb_kbd.c @@ -460,10 +460,12 @@ static int usb_kbd_probe(struct usb_device *dev, unsigned int ifnum) /* We found a USB Keyboard, install it. */ usb_set_protocol(dev, iface->desc.bInterfaceNumber, 0); + debug("USB KBD: found set idle...\n"); #if !defined(CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP) && \ !defined(CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE) - debug("USB KBD: found set idle...\n"); usb_set_idle(dev, iface->desc.bInterfaceNumber, REPEAT_RATE / 4, 0); +#else + usb_set_idle(dev, iface->desc.bInterfaceNumber, 0, 0); #endif debug("USB KBD: enable interrupt pipe...\n"); -- cgit v0.10.2 From 437a7293a7168b6a2d356fe5d1955091afa2074f Mon Sep 17 00:00:00 2001 From: Vitaly Andrianov Date: Mon, 15 Jun 2015 08:54:15 -0400 Subject: keystone2: use correct EFUSE_BOOTROM fileds to configure speed The get_max_arm_speed() and get_max_dev_speed() used wrong register fields to get the maximum speeds. This commit fixes the bug. Signed-off-by: Vitaly Andrianov Reviewed-by: Tom Rini diff --git a/arch/arm/mach-keystone/clock.c b/arch/arm/mach-keystone/clock.c index d13fbc1..625907f 100644 --- a/arch/arm/mach-keystone/clock.c +++ b/arch/arm/mach-keystone/clock.c @@ -246,18 +246,18 @@ static inline u32 read_efuse_bootrom(void) } #endif -inline int get_max_dev_speed(void) -{ - return get_max_speed(read_efuse_bootrom() & 0xffff, dev_speeds); -} - #ifndef CONFIG_SOC_K2E inline int get_max_arm_speed(void) { - return get_max_speed((read_efuse_bootrom() >> 16) & 0xffff, arm_speeds); + return get_max_speed(read_efuse_bootrom() & 0xffff, arm_speeds); } #endif +inline int get_max_dev_speed(void) +{ + return get_max_speed((read_efuse_bootrom() >> 16) & 0xffff, dev_speeds); +} + void pass_pll_pa_clk_enable(void) { u32 reg; -- cgit v0.10.2 From a78f78ebeb51169ce0ae22f2cd6db93ca33b20e3 Mon Sep 17 00:00:00 2001 From: Paul Kocialkowski Date: Mon, 15 Jun 2015 21:35:04 +0200 Subject: common: cmd_part: Proper alignment This fixes a misaligned declaration. Signed-off-by: Paul Kocialkowski diff --git a/common/cmd_part.c b/common/cmd_part.c index 8483c12..4bdbf90 100644 --- a/common/cmd_part.c +++ b/common/cmd_part.c @@ -88,7 +88,7 @@ static int do_part_list(int argc, char * const argv[]) if (var != NULL) { int p; char str[512] = { '\0', }; - disk_partition_t info; + disk_partition_t info; for (p = 1; p < 128; p++) { char t[5]; -- cgit v0.10.2 From 8607c4f127d0f2a6d2572960821443563f4eca51 Mon Sep 17 00:00:00 2001 From: Paul Kocialkowski Date: Mon, 15 Jun 2015 21:35:05 +0200 Subject: common: cmd_part: start and size sub-commands introduction This introduces the part start and part size sub-commands. The purpose of these is to store the start block and size of a partition in a variable, given the device and partition number. This allows reading raw data that fits a single partition more easily. For instance, this could be used to figure out the start block and size of a kernel partition when a partition table is present, given the partition number. Signed-off-by: Paul Kocialkowski Acked-by: Stephen Warren [trini: Change "%lx" to LBAF] Signed-off-by: Tom Rini diff --git a/common/cmd_part.c b/common/cmd_part.c index 4bdbf90..b860624 100644 --- a/common/cmd_part.c +++ b/common/cmd_part.c @@ -112,6 +112,74 @@ static int do_part_list(int argc, char * const argv[]) return 0; } +static int do_part_start(int argc, char * const argv[]) +{ + block_dev_desc_t *desc; + disk_partition_t info; + char buf[512] = { 0 }; + int part; + int err; + int ret; + + if (argc < 3) + return CMD_RET_USAGE; + if (argc > 4) + return CMD_RET_USAGE; + + part = simple_strtoul(argv[2], NULL, 0); + + ret = get_device(argv[0], argv[1], &desc); + if (ret < 0) + return 1; + + err = get_partition_info(desc, part, &info); + if (err) + return 1; + + snprintf(buf, sizeof(buf), LBAF, info.start); + + if (argc > 3) + setenv(argv[3], buf); + else + printf("%s\n", buf); + + return 0; +} + +static int do_part_size(int argc, char * const argv[]) +{ + block_dev_desc_t *desc; + disk_partition_t info; + char buf[512] = { 0 }; + int part; + int err; + int ret; + + if (argc < 3) + return CMD_RET_USAGE; + if (argc > 4) + return CMD_RET_USAGE; + + part = simple_strtoul(argv[2], NULL, 0); + + ret = get_device(argv[0], argv[1], &desc); + if (ret < 0) + return 1; + + err = get_partition_info(desc, part, &info); + if (err) + return 1; + + snprintf(buf, sizeof(buf), LBAF, info.size); + + if (argc > 3) + setenv(argv[3], buf); + else + printf("%s\n", buf); + + return 0; +} + static int do_part(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { if (argc < 2) @@ -121,6 +189,10 @@ static int do_part(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return do_part_uuid(argc - 2, argv + 2); else if (!strcmp(argv[1], "list")) return do_part_list(argc - 2, argv + 2); + else if (!strcmp(argv[1], "start")) + return do_part_start(argc - 2, argv + 2); + else if (!strcmp(argv[1], "size")) + return do_part_size(argc - 2, argv + 2); return CMD_RET_USAGE; } @@ -136,5 +208,9 @@ U_BOOT_CMD( " - print a device's partition table\n" "part list [flags] \n" " - set environment variable to the list of partitions\n" - " flags can be -bootable (list only bootable partitions)" + " flags can be -bootable (list only bootable partitions)\n" + "part start \n" + " - set environment variable to the start of the partition (in blocks)\n" + "part size \n" + " - set environment variable to the size of the partition (in blocks)" ); -- cgit v0.10.2 From 61159b76844437bf9004c3a38b5a4ff1a24860d5 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Tue, 16 Jun 2015 14:59:34 +0200 Subject: arm, am33xx: update for siemens am335x based boards updates for the siemens am335x based boards: - draco: add delay for DDR3 configuration - change MTD partition layout and add a possibility to redefine MTD layout in board header. - move ubi support to common header file - draco: improve dtb naming - draco: set CONFIG_SYS_CBSIZE to 1024 - add generic env based led Leds can now be defined in Environment - add generic env based dfu button Which gpio is used for the dfu button can be defined through the Environment - set MACH_TYPE only if defined - draco: increase CPU freq to 300MHz - Add time command to siemens am33xx boards - DDR3: increase default tRFC - draco: enable pullup for DFU and ERST pin - change print format DDR3 Signed-off-by: Samuel Egli Acked-by: Heiko Schocher Reviewed-by: Tom Rini Signed-off-by: Heiko Schocher diff --git a/board/siemens/common/board.c b/board/siemens/common/board.c index fb2de48..c127f6c 100644 --- a/board/siemens/common/board.c +++ b/board/siemens/common/board.c @@ -75,8 +75,9 @@ int board_init(void) i2c_set_bus_num(0); if (read_eeprom() < 0) puts("Could not get board ID.\n"); - +#ifdef CONFIG_MACH_TYPE gd->bd->bi_arch_number = CONFIG_MACH_TYPE; +#endif gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; #ifdef CONFIG_FACTORYSET @@ -102,21 +103,29 @@ const struct dpll_params *get_dpll_ddr_params(void) } #ifndef CONFIG_SPL_BUILD + +#define MAX_NR_LEDS 10 +#define MAX_PIN_NUMBER 128 +#define STARTUP 0 + #if defined(BOARD_DFU_BUTTON_GPIO) -/* - * This command returns the status of the user button on - * Input - none - * Returns - 1 if button is held down - * 0 if button is not held down - */ -static int -do_userbutton(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +unsigned char get_button_state(char * const envname, unsigned char def) { int button = 0; int gpio; + char *ptr_env; - gpio = BOARD_DFU_BUTTON_GPIO; - gpio_request(gpio, "DFU"); + /* If button is not found we take default */ + ptr_env = getenv(envname); + if (NULL == ptr_env) { + gpio = def; + } else { + gpio = (unsigned char)simple_strtoul(ptr_env, NULL, 0); + if (gpio > MAX_PIN_NUMBER) + gpio = def; + } + + gpio_request(gpio, ""); gpio_direction_input(gpio); if (gpio_get_value(gpio)) button = 1; @@ -127,53 +136,27 @@ do_userbutton(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return button; } - -U_BOOT_CMD( - dfubutton, CONFIG_SYS_MAXARGS, 1, do_userbutton, - "Return the status of the DFU button", - "" -); -#endif -/* - * This command sets led - * Input - name of led - * value of led - * Returns - 1 if input does not match - * 0 if led was set +/** + * This command returns the status of the user button on + * Input - none + * Returns - 1 if button is held down + * 0 if button is not held down */ static int -do_setled(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +do_userbutton(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - int gpio = 0; - if (argc != 3) - goto exit; -#if defined(BOARD_STATUS_LED) - if (!strcmp(argv[1], "stat")) - gpio = BOARD_STATUS_LED; -#endif -#if defined(BOARD_DFU_BUTTON_LED) - if (!strcmp(argv[1], "dfu")) - gpio = BOARD_DFU_BUTTON_LED; -#endif - /* If argument does not mach exit */ - if (gpio == 0) - goto exit; - gpio_request(gpio, ""); - gpio_direction_output(gpio, 1); - if (!strcmp(argv[2], "1")) - gpio_set_value(gpio, 1); - else - gpio_set_value(gpio, 0); - return 0; -exit: - return 1; + int button = 0; + button = get_button_state("button_dfu0", BOARD_DFU_BUTTON_GPIO); + button |= get_button_state("button_dfu1", BOARD_DFU_BUTTON_GPIO); + return button; } U_BOOT_CMD( - led, CONFIG_SYS_MAXARGS, 2, do_setled, - "Set led on or off", - "dfu val - set dfu led\nled stat val - set status led" + dfubutton, CONFIG_SYS_MAXARGS, 1, do_userbutton, + "Return the status of the DFU button", + "" ); +#endif static int do_usertestwdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) @@ -189,4 +172,95 @@ U_BOOT_CMD( "Sends U-Boot into infinite loop", "" ); + +/** + * Get led gpios from env and set them. + * The led define in environment need to need to be of the form ledN=NN,S0,S1 + * where N is an unsigned integer from 0 to 9 and S0 and S1 is 0 or 1. S0 + * defines the startup state of the led, S1 the special state of the led when + * it enters e.g. dfu mode. + */ +void set_env_gpios(unsigned char state) +{ + char *ptr_env; + char str_tmp[5]; /* must contain "ledX"*/ + char num[1]; + unsigned char i, idx, pos1, pos2, ccount; + unsigned char gpio_n, gpio_s0, gpio_s1; + + for (i = 0; i < MAX_NR_LEDS; i++) { + strcpy(str_tmp, "led"); + sprintf(num, "%d", i); + strcat(str_tmp, num); + + /* If env var is not found we stop */ + ptr_env = getenv(str_tmp); + if (NULL == ptr_env) + break; + + /* Find sperators position */ + pos1 = 0; + pos2 = 0; + ccount = 0; + for (idx = 0; ptr_env[idx] != '\0'; idx++) { + if (ptr_env[idx] == ',') { + if (ccount++ < 1) + pos1 = idx; + else + pos2 = idx; + } + } + /* Bad led description skip this definition */ + if (pos2 <= pos1 || ccount > 2) + continue; + + /* Get pin number and request gpio */ + memset(str_tmp, 0, sizeof(str_tmp)); + strncpy(str_tmp, ptr_env, pos1*sizeof(char)); + gpio_n = (unsigned char)simple_strtoul(str_tmp, NULL, 0); + + /* Invalid gpio number skip definition */ + if (gpio_n > MAX_PIN_NUMBER) + continue; + + gpio_request(gpio_n, ""); + + if (state == STARTUP) { + /* get pin state 0 and set */ + memset(str_tmp, 0, sizeof(str_tmp)); + strncpy(str_tmp, ptr_env+pos1+1, + (pos2-pos1-1)*sizeof(char)); + gpio_s0 = (unsigned char)simple_strtoul(str_tmp, NULL, + 0); + + gpio_direction_output(gpio_n, gpio_s0); + + } else { + /* get pin state 1 and set */ + memset(str_tmp, 0, sizeof(str_tmp)); + strcpy(str_tmp, ptr_env+pos2+1); + gpio_s1 = (unsigned char)simple_strtoul(str_tmp, NULL, + 0); + gpio_direction_output(gpio_n, gpio_s1); + } + } /* loop through defined led in environment */ +} + +static int do_board_led(cmd_tbl_t *cmdtp, int flag, int argc, + char *const argv[]) +{ + if (argc != 2) + return CMD_RET_USAGE; + if ((unsigned char)simple_strtoul(argv[1], NULL, 0) == STARTUP) + set_env_gpios(0); + else + set_env_gpios(1); + return 0; +}; + +U_BOOT_CMD( + draco_led, CONFIG_SYS_MAXARGS, 2, do_board_led, + "Set LEDs defined in environment", + "<0|1>" +); #endif /* !CONFIG_SPL_BUILD */ diff --git a/board/siemens/draco/board.c b/board/siemens/draco/board.c index ede73ba..2697762 100644 --- a/board/siemens/draco/board.c +++ b/board/siemens/draco/board.c @@ -43,7 +43,7 @@ static struct draco_baseboard_id __attribute__((section(".data"))) settings; /* Default@303MHz-i0 */ const struct ddr3_data ddr3_default = { 0x33524444, 0x56312e35, 0x0080, 0x0000, 0x003A, 0x003F, 0x009F, - 0x0079, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x00100206, 0x61A44A32, + 0x0079, 0x0888A39B, 0x26517FDA, 0x501F84EF, 0x00100206, 0x61A44A32, 0x0000093B, 0x0000014A, "default name @303MHz \0", "default marking \0", @@ -71,8 +71,8 @@ static void print_ddr3_timings(void) printf("clock:\t\t%d MHz\n", DDR_PLL_FREQ); printf("device:\t\t%s\n", settings.ddr3.manu_name); printf("marking:\t%s\n", settings.ddr3.manu_marking); - printf("timing parameters\n"); - printf("diff\teeprom\tdefault\n"); + printf("%-20s, %-8s, %-8s, %-4s\n", "timing parameters", "eeprom", + "default", "diff"); PRINTARGS(magic); PRINTARGS(version); PRINTARGS(ddr3_sratio); @@ -96,9 +96,12 @@ static void print_ddr3_timings(void) static void print_chip_data(void) { + struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev); printf("\nCPU BOARD\n"); printf("device: \t'%s'\n", settings.chip.sdevname); printf("hw version: \t'%s'\n", settings.chip.shwver); + printf("max freq: \t%d MHz\n", dpll_mpu_opp100.m); } #endif /* CONFIG_SPL_BUILD */ @@ -193,6 +196,11 @@ struct ctrl_ioregs draco_ddr3_ioregs = { config_ddr(DDR_PLL_FREQ, &draco_ddr3_ioregs, &draco_ddr3_data, &draco_ddr3_cmd_ctrl_data, &draco_ddr3_emif_reg_data, 0); + + /* For Samsung 2Gbit RAM we need this delay otherwise config fails after + * soft reset. + */ + udelay(2000); } static void spl_siemens_board_init(void) @@ -201,6 +209,26 @@ static void spl_siemens_board_init(void) } #endif /* if def CONFIG_SPL_BUILD */ +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) +{ + omap_nand_switch_ecc(1, 8); +#ifdef CONFIG_FACTORYSET + /* Set ASN in environment*/ + if (factory_dat.asn[0] != 0) { + setenv("dtb_name", (char *)factory_dat.asn); + } else { + /* dtb suffix gets added in load script */ + setenv("dtb_name", "am335x-draco"); + } +#else + setenv("dtb_name", "am335x-draco"); +#endif + + return 0; +} +#endif + #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) static void cpsw_control(int enabled) @@ -280,13 +308,4 @@ U_BOOT_CMD( #endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */ #endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */ -#ifdef CONFIG_BOARD_LATE_INIT -int board_late_init(void) -{ - omap_nand_switch_ecc(1, 8); - - return 0; -} -#endif - #include "../common/board.c" diff --git a/board/siemens/draco/board.h b/board/siemens/draco/board.h index ff8ab76..8856fd0 100644 --- a/board/siemens/draco/board.h +++ b/board/siemens/draco/board.h @@ -16,9 +16,13 @@ #ifndef _BOARD_H_ #define _BOARD_H_ -#define PARGS3(x) settings.ddr3.x-ddr3_default.x, \ - settings.ddr3.x, ddr3_default.x -#define PRINTARGS(y) printf("%x, %8x, %8x : "#y"\n", PARGS3(y)) +#define PARGS(x) #x , /* Parameter Name */ \ + settings.ddr3.x, /* EEPROM Value */ \ + ddr3_default.x, /* Default Value */ \ + settings.ddr3.x-ddr3_default.x /* Difference */ + +#define PRINTARGS(y) printf("%-20s, %8x, %8x, %4d\n", PARGS(y)) + #define MAGIC_CHIP 0x50494843 /* Automatic generated definition */ @@ -69,4 +73,7 @@ void enable_uart4_pin_mux(void); void enable_uart5_pin_mux(void); void enable_i2c0_pin_mux(void); void enable_board_pin_mux(void); + +/* Forwared declaration, defined in common board.c */ +void set_env_gpios(unsigned char state); #endif diff --git a/board/siemens/draco/mux.c b/board/siemens/draco/mux.c index eaa3c70..dbcc80b 100644 --- a/board/siemens/draco/mux.c +++ b/board/siemens/draco/mux.c @@ -60,7 +60,7 @@ static struct module_pin_mux nand_pin_mux[] = { static struct module_pin_mux gpios_pin_mux[] = { /* DFU button GPIO0_27*/ - {OFFSET(gpmc_ad11), (MODE(7) | PULLUDEN | RXACTIVE)}, + {OFFSET(gpmc_ad11), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)}, {OFFSET(gpmc_csn3), MODE(7) }, /* LED0 GPIO2_0 */ {OFFSET(emu0), MODE(7)}, /* LED1 GPIO3_7 */ /* Triacs in HW Rev 2 */ @@ -222,7 +222,7 @@ static struct module_pin_mux gpios_pin_mux[] = { {OFFSET(vrefp), MODE(7) | RXACTIVE | PULLUDDIS}, {OFFSET(vrefn), MODE(7) | RXACTIVE | PULLUDDIS}, /* nRST for SMSC LAN9303 switch - GPIO2_24 */ - {OFFSET(lcd_pclk), MODE(7) }, /* LAN9303 nRST */ + {OFFSET(lcd_pclk), MODE(7) | PULLUDEN | PULLUP_EN }, /* LAN9303 nRST */ {-1}, }; diff --git a/include/configs/draco.h b/include/configs/draco.h index a2438d8..acefd3e 100644 --- a/include/configs/draco.h +++ b/include/configs/draco.h @@ -19,18 +19,23 @@ #include "siemens-am33x-common.h" -#define CONFIG_SYS_MPUCLK 275 +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_SYS_MPUCLK 300 #define DDR_PLL_FREQ 303 #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC -#define BOARD_DFU_BUTTON_GPIO 27 -#define BOARD_DFU_BUTTON_LED 64 /* red LED */ -#define BOARD_STATUS_LED 103 /* green LED */ +#define BOARD_DFU_BUTTON_GPIO 27 /* Use as default */ #define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */ +#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ + "button_dfu0=27\0" \ + "led0=103,1,0\0" \ + "led1=64,0,1\0" + #undef CONFIG_DOS_PARTITION #undef CONFIG_CMD_FAT +#define CONFIG_BOARD_LATE_INIT /* Physical Memory Map */ #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ @@ -57,13 +62,25 @@ /* Watchdog */ #define CONFIG_OMAP_WATCHDOG +/* Define own nand partitions */ +#define CONFIG_ENV_OFFSET_REDUND 0x2E0000 +#define CONFIG_ENV_SIZE_REDUND 0x2000 +#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE) + + +#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V2 + #ifndef CONFIG_SPL_BUILD /* Default env settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ + "hostname=draco\0" \ "nand_img_size=0x400000\0" \ "optargs=\0" \ - CONFIG_COMMON_ENV_SETTINGS + "preboot=draco_led 0\0" \ + CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ + CONFIG_ENV_SETTINGS_V2 \ + CONFIG_ENV_SETTINGS_NAND_V2 #ifndef CONFIG_RESTORE_FLASH /* set to negative value for no autoboot */ @@ -75,6 +92,7 @@ "reset; " \ "fi;" \ "run nand_boot;" \ +"run nand_boot_backup;" \ "reset;" diff --git a/include/configs/dxr2.h b/include/configs/dxr2.h index 76e6cac..fa74070 100644 --- a/include/configs/dxr2.h +++ b/include/configs/dxr2.h @@ -19,7 +19,8 @@ #include "siemens-am33x-common.h" -#define CONFIG_SYS_MPUCLK 275 +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_SYS_MPUCLK 300 #define DDR_PLL_FREQ 303 #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC @@ -28,9 +29,15 @@ #define BOARD_STATUS_LED 103 /* green LED */ #define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */ +#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ + "button_dfu0=27\0" \ + "led0=103,1,0\0" \ + "led1=64,0,1\0" + #undef CONFIG_DOS_PARTITION #undef CONFIG_CMD_FAT +#define CONFIG_BOARD_LATE_INIT /* Physical Memory Map */ #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ @@ -57,6 +64,14 @@ /* Watchdog */ #define CONFIG_OMAP_WATCHDOG +/* Define own nand partitions */ +#define CONFIG_ENV_OFFSET_REDUND 0x2E0000 +#define CONFIG_ENV_SIZE_REDUND 0x2000 +#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE) + + +#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V2 + #ifndef CONFIG_SPL_BUILD /* Default env settings */ @@ -64,7 +79,10 @@ "hostname=dxr2\0" \ "nand_img_size=0x400000\0" \ "optargs=\0" \ - CONFIG_COMMON_ENV_SETTINGS + "preboot=draco_led 0\0" \ + CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ + CONFIG_ENV_SETTINGS_V2 \ + CONFIG_ENV_SETTINGS_NAND_V2 #ifndef CONFIG_RESTORE_FLASH /* set to negative value for no autoboot */ @@ -76,6 +94,7 @@ "reset; " \ "fi;" \ "run nand_boot;" \ +"run nand_boot_backup;" \ "reset;" diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h index 946b2c8..d896bca 100644 --- a/include/configs/pxm2.h +++ b/include/configs/pxm2.h @@ -25,11 +25,14 @@ #define DDR_PLL_FREQ 266 #define BOARD_DFU_BUTTON_GPIO 59 -#define BOARD_DFU_BUTTON_LED 117 #define BOARD_LCD_POWER 111 #define BOARD_BACK_LIGHT 112 #define BOARD_TOUCH_POWER 57 +#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ + "button_dfu0=59\0" \ + "led0=117,0,1\0" \ + /* Physical Memory Map */ #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* 1GB */ @@ -48,29 +51,25 @@ #define CONFIG_FACTORYSET -/* UBI Support */ -#ifndef CONFIG_SPL_BUILD -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_PARTITIONS -#define CONFIG_MTD_DEVICE -#define CONFIG_RBTREE -#define CONFIG_LZO -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS -#endif /* Watchdog */ #define CONFIG_OMAP_WATCHDOG #ifndef CONFIG_SPL_BUILD +/* Use common default */ +#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V1 + /* Default env settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ "hostname=pxm2\0" \ "nand_img_size=0x500000\0" \ "optargs=\0" \ + "preboot=draco_led 0\0" \ + CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ "splashpos=m,m\0" \ - CONFIG_COMMON_ENV_SETTINGS \ + CONFIG_ENV_SETTINGS_V1 \ + CONFIG_ENV_SETTINGS_NAND_V1 \ "mmc_dev=0\0" \ "mmc_root=/dev/mmcblk0p2 rw\0" \ "mmc_root_fs_type=ext4 rootwait\0" \ diff --git a/include/configs/rut.h b/include/configs/rut.h index 0067ea4..78264ba 100644 --- a/include/configs/rut.h +++ b/include/configs/rut.h @@ -45,29 +45,23 @@ #define CONFIG_FACTORYSET -/* UBI Support */ -#ifndef CONFIG_SPL_BUILD -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_PARTITIONS -#define CONFIG_MTD_DEVICE -#define CONFIG_RBTREE -#define CONFIG_LZO -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS -#endif /* Watchdog */ #define WATCHDOG_TRIGGER_GPIO 14 #ifndef CONFIG_SPL_BUILD +/* Use common default */ +#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V1 + /* Default env settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ "hostname=rut\0" \ "nand_img_size=0x500000\0" \ "splashpos=m,m\0" \ "optargs=fixrtc --no-log consoleblank=0 \0" \ - CONFIG_COMMON_ENV_SETTINGS \ + CONFIG_ENV_SETTINGS_V1 \ + CONFIG_ENV_SETTINGS_NAND_V1 \ "mmc_dev=0\0" \ "mmc_root=/dev/mmcblk0p2 rw\0" \ "mmc_root_fs_type=ext4 rootwait\0" \ diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index b005c86..7b602b3 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -45,6 +45,7 @@ #define CONFIG_CMD_ASKENV #define CONFIG_CMD_ECHO #define CONFIG_CMD_CACHE +#define CONFIG_CMD_TIME #define CONFIG_SYS_GENERIC_BOARD @@ -69,7 +70,7 @@ #define CONFIG_SYS_MAXARGS 32 /* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 512 +#define CONFIG_SYS_CBSIZE 1024 /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ @@ -309,22 +310,87 @@ /* NAND support */ #ifdef CONFIG_NAND #define CONFIG_CMD_NAND + +/* UBI Support */ +#ifndef CONFIG_SPL_BUILD #define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE +#define CONFIG_RBTREE +#define CONFIG_LZO +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#endif + +/* Commen environment */ +#define CONFIG_PREBOOT +#define COMMON_ENV_DFU_ARGS "dfu_args=run bootargs_defaults;" \ + "setenv bootargs ${bootargs};" \ + "mtdparts default;" \ + "draco_led 1;" \ + "dfu 0 nand 0;" \ + "draco_led 0;\0" \ + +#define COMMON_ENV_NAND_BOOT \ + "nand_boot=echo Booting from nand; " \ + "if test ${upgrade_available} -eq 1; then " \ + "if test ${bootcount} -gt ${bootlimit}; " \ + "then " \ + "setenv upgrade_available 0;" \ + "setenv ${partitionset_active} true;" \ + "if test -n ${A}; then " \ + "setenv partitionset_active B; " \ + "env delete A; " \ + "fi;" \ + "if test -n ${B}; then " \ + "setenv partitionset_active A; " \ + "env delete B; " \ + "fi;" \ + "saveenv; " \ + "fi;" \ + "fi;" \ + "echo set ${partitionset_active}...;" \ + "run nand_args; " + +#define COMMON_ENV_NAND_CMDS "flash_self=run nand_boot\0" \ + "flash_self_test=setenv testargs test; " \ + "run nand_boot\0" \ + "dfu_start=echo Preparing for dfu mode ...; " \ + "run dfu_args; \0" + +#define COMMON_ENV_SETTINGS \ + "verify=no \0" \ + "project_dir=targetdir\0" \ + "upgrade_available=0\0" \ + "altbootcmd=run bootcmd\0" \ + "bootlimit=3\0" \ + "partitionset_active=A\0" \ + "loadaddr=0x82000000\0" \ + "kloadaddr=0x81000000\0" \ + "script_addr=0x81900000\0" \ + "console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \ + "nfsopts=nolock rw\0" \ + "ip_method=none\0" \ + "bootenv=uEnv.txt\0" \ + "bootargs_defaults=setenv bootargs " \ + "console=${console} " \ + "${testargs} " \ + "${optargs}\0" \ + "siemens_help=echo; "\ + "echo Type 'run flash_self' to use kernel and root " \ + "filesystem on memory; echo Type 'run flash_self_test' to " \ + "use kernel and root filesystem on memory, boot in test " \ + "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \ + "from memory and root filesystem over NFS; echo Type " \ + "'run net_nfs' to get Kernel over TFTP and mount root " \ + "filesystem over NFS; " \ + "echo Set partitionset_active variable to 'A' " \ + "or 'B' to select kernel and rootfs partition; " \ + "echo" \ + "\0" -#define MTDIDS_NAME_STR "omap2-nand.0" -#define MTDIDS_DEFAULT "nand0=" MTDIDS_NAME_STR -#define MTDPARTS_DEFAULT "mtdparts=" MTDIDS_NAME_STR ":" \ - "128k(spl)," \ - "128k(spl.backup1)," \ - "128k(spl.backup2)," \ - "128k(spl.backup3)," \ - "1920k(u-boot)," \ - "128k(uboot.env)," \ - "5120k(kernel_a)," \ - "5120k(kernel_b)," \ - "8192k(mtdoops)," \ - "-(rootfs)" /* + * Variant 1 partition layout * chip-size = 256MiB *| name | size | address area | *------------------------------------------------------- @@ -340,8 +406,21 @@ *| rootfs | 235.500 MiB | 0x 1480000..0x fffffff | *------------------------------------------------------- */ +#define MTDIDS_NAME_STR "omap2-nand.0" +#define MTDIDS_DEFAULT "nand0=" MTDIDS_NAME_STR +#define MTDPARTS_DEFAULT_V1 "mtdparts=" MTDIDS_NAME_STR ":" \ + "128k(spl)," \ + "128k(spl.backup1)," \ + "128k(spl.backup2)," \ + "128k(spl.backup3)," \ + "1920k(u-boot)," \ + "128k(uboot.env)," \ + "5120k(kernel_a)," \ + "5120k(kernel_b)," \ + "8192k(mtdoops)," \ + "-(rootfs)" -#define DFU_ALT_INFO_NAND \ +#define DFU_ALT_INFO_NAND_V1 \ "spl part 0 1;" \ "spl.backup1 part 0 2;" \ "spl.backup2 part 0 3;" \ @@ -352,17 +431,7 @@ "kernel_b part 0 8;" \ "rootfs partubi 0 10" -#define CONFIG_COMMON_ENV_SETTINGS \ - "verify=no \0" \ - "project_dir=targetdir\0" \ - "upgrade_available=0\0" \ - "altbootcmd=run bootcmd\0" \ - "bootlimit=3\0" \ - "partitionset_active=A\0" \ - "loadaddr=0x82000000\0" \ - "kloadaddr=0x81000000\0" \ - "script_addr=0x81900000\0" \ - "console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \ +#define CONFIG_ENV_SETTINGS_NAND_V1 \ "nand_active_ubi_vol=rootfs_a\0" \ "nand_active_ubi_vol_A=rootfs_a\0" \ "nand_active_ubi_vol_B=rootfs_b\0" \ @@ -370,13 +439,6 @@ "nand_src_addr=0x280000\0" \ "nand_src_addr_A=0x280000\0" \ "nand_src_addr_B=0x780000\0" \ - "nfsopts=nolock rw mem=128M\0" \ - "ip_method=none\0" \ - "bootenv=uEnv.txt\0" \ - "bootargs_defaults=setenv bootargs " \ - "console=${console} " \ - "${testargs} " \ - "${optargs}\0" \ "nand_args=run bootargs_defaults;" \ "mtdparts default;" \ "setenv ${partitionset_active} true;" \ @@ -395,15 +457,15 @@ "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ "=mtdoops\0" \ - "dfu_args=run bootargs_defaults;" \ - "setenv bootargs ${bootargs} ;" \ - "mtdparts default; " \ - "led dfu 1;" \ - "led stat 0;" \ - "dfu 0 nand 0;" \ - "led dfu 0;" \ - "led stat 1;\0" \ - "dfu_alt_info=" DFU_ALT_INFO_NAND "\0" \ + COMMON_ENV_DFU_ARGS \ + "dfu_alt_info=" DFU_ALT_INFO_NAND_V1 "\0" \ + COMMON_ENV_NAND_BOOT \ + "nand read.i ${kloadaddr} ${nand_src_addr} " \ + "${nand_img_size}; bootm ${kloadaddr}\0" \ + COMMON_ENV_NAND_CMDS + +#define CONFIG_ENV_SETTINGS_V1 \ + COMMON_ENV_SETTINGS \ "net_args=run bootargs_defaults;" \ "mtdparts default;" \ "setenv bootfile ${project_dir}/kernel/uImage;" \ @@ -413,48 +475,103 @@ "nfsroot=${serverip}:${rootpath},${nfsopts} " \ "ip=${ipaddr}:${serverip}:" \ "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \ - "nand_boot=echo Booting from nand; " \ - "if test ${upgrade_available} -eq 1; then " \ - "if test ${bootcount} -gt ${bootlimit}; " \ - "then " \ - "setenv upgrade_available 0;" \ - "setenv ${partitionset_active} true;" \ - "if test -n ${A}; then " \ - "setenv partitionset_active B; " \ - "env delete A; " \ - "fi;" \ - "if test -n ${B}; then " \ - "setenv partitionset_active A; " \ - "env delete B; " \ - "fi;" \ - "saveenv; " \ - "fi;" \ + "net_nfs=echo Booting from network ...; " \ + "run net_args; " \ + "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \ + "bootm ${kloadaddr}\0" + +/* + * Variant 2 partition layout + * chip-size = 256MiB + *| name | size | address area | + *------------------------------------------------------- + *| spl | 128.000 KiB | 0x 0..0x 1ffff | + *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | + *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | + *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | + *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | + *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff | + *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff | + *| rootfs | 148.000 MiB | 0x 360000..0x 975ffff | + *| mtdoops | 512.000 KiB | 0x 9760000..0x 98Dffff | + *|configuration | 104.125 MiB | 0x 97E0000..0x fffffff | + *------------------------------------------------------- + */ + +#define MTDPARTS_DEFAULT_V2 "mtdparts=" MTDIDS_NAME_STR ":" \ + "128k(spl)," \ + "128k(spl.backup1)," \ + "128k(spl.backup2)," \ + "128k(spl.backup3)," \ + "1920k(u-boot)," \ + "512k(u-boot.env0)," \ + "512k(u-boot.env1)," \ + "148m(rootfs)," \ + "512k(mtdoops)," \ + "-(configuration)" + +#define DFU_ALT_INFO_NAND_V2 \ + "spl part 0 1;" \ + "spl.backup1 part 0 2;" \ + "spl.backup2 part 0 3;" \ + "spl.backup3 part 0 4;" \ + "u-boot part 0 5;" \ + "u-boot.env0 part 0 6;" \ + "u-boot.env1 part 0 7;" \ + "rootfs partubi 0 8;" \ + "configuration partubi 0 10" + +#define CONFIG_ENV_SETTINGS_NAND_V2 \ + "nand_active_ubi_vol=rootfs_a\0" \ + "rootfs_name=rootfs\0" \ + "kernel_name=uImage\0"\ + "nand_root_fs_type=ubifs rootwait=1\0" \ + "nand_args=run bootargs_defaults;" \ + "mtdparts default;" \ + "setenv ${partitionset_active} true;" \ + "if test -n ${A}; then " \ + "setenv nand_active_ubi_vol ${rootfs_name}_a;" \ "fi;" \ - "echo set ${partitionset_active}...;" \ - "run nand_args; " \ - "nand read.i ${kloadaddr} ${nand_src_addr} " \ - "${nand_img_size}; bootm ${kloadaddr}\0" \ + "if test -n ${B}; then " \ + "setenv nand_active_ubi_vol ${rootfs_name}_b;" \ + "fi;" \ + "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ + "ubi.mtd=7,2048 ubi.mtd=9,2048;" \ + "setenv bootargs ${bootargs} " \ + "root=${nand_root} noinitrd ${mtdparts} " \ + "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ + "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ + "=mtdoops\0" \ + COMMON_ENV_DFU_ARGS \ + "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \ + COMMON_ENV_NAND_BOOT \ + "ubi part rootfs 2048;" \ + "ubifsmount ubi0:${nand_active_ubi_vol};" \ + "ubifsload ${kloadaddr} boot/${kernel_name};" \ + "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \ + "bootm ${kloadaddr} - ${loadaddr}\0" \ + "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \ + "bootm ${kloadaddr} - ${loadaddr}\0" \ + COMMON_ENV_NAND_CMDS + +#define CONFIG_ENV_SETTINGS_V2 \ + COMMON_ENV_SETTINGS \ + "net_args=run bootargs_defaults;" \ + "mtdparts default;" \ + "setenv bootfile ${project_dir}/kernel/uImage;" \ + "setenv bootdtb ${project_dir}/kernel/dtb;" \ + "setenv rootpath /home/projects/${project_dir}/rootfs;" \ + "setenv bootargs ${bootargs} " \ + "root=/dev/nfs ${mtdparts} " \ + "nfsroot=${serverip}:${rootpath},${nfsopts} " \ + "ip=${ipaddr}:${serverip}:" \ + "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \ "net_nfs=echo Booting from network ...; " \ "run net_args; " \ "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \ - "bootm ${kloadaddr}\0" \ - "flash_self=run nand_boot\0" \ - "flash_self_test=setenv testargs test; " \ - "run nand_boot\0" \ - "dfu_start=echo Preparing for dfu mode ...; " \ - "run dfu_args; \0" \ - "preboot=echo; "\ - "echo Type 'run flash_self' to use kernel and root " \ - "filesystem on memory; echo Type 'run flash_self_test' to " \ - "use kernel and root filesystem on memory, boot in test " \ - "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \ - "from memory and root filesystem over NFS; echo Type " \ - "'run net_nfs' to get Kernel over TFTP and mount root " \ - "filesystem over NFS; " \ - "echo Set partitionset_active variable to 'A' " \ - "or 'B' to select kernel and rootfs partition; " \ - "echo" \ - "\0" + "tftpboot ${loadaddr} ${serverip}:${bootdtb}; " \ + "bootm ${kloadaddr} - ${loadaddr}\0" + #define CONFIG_NAND_OMAP_GPMC #define CONFIG_NAND_OMAP_ELM @@ -473,6 +590,9 @@ #define CONFIG_OMAP_GPIO +/* Gpio cmd support */ +#define CONFIG_CMD_GPIO + /* Watchdog */ #define CONFIG_HW_WATCHDOG -- cgit v0.10.2 From bd2c4522c26d535515aebca52d27c004a7e0c05c Mon Sep 17 00:00:00 2001 From: Guillaume GARDET Date: Tue, 16 Jun 2015 15:00:09 +0200 Subject: ti: armv7: enable EXT support in SPL (using ti_armv7_common.h) Tested on Pandaboard (rev. A3) and Beagleboard xM (rev. B). Compilation tested on TI armv7 boards and OMAP boards from other vendors. Signed-off-by: Guillaume GARDET Cc: Tom Rini Reviewed-by: Tom Rini diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index d1c390f..7a95cb8 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -259,6 +259,11 @@ #define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_EXT_SUPPORT +#endif + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_THUMB_BUILD /* Thumbs mode to save space in SPL */ #endif /* General parts of the framework, required. */ -- cgit v0.10.2 From 3683c3d1f784d1e81e31066cecefd320b4ffaed4 Mon Sep 17 00:00:00 2001 From: Guillaume GARDET Date: Tue, 16 Jun 2015 15:00:10 +0200 Subject: ti: omap4: remove CONFIG_SPL_EXT_SUPPORT from ti_omap4_common.h since it is now in ti_armv7_common.h Signed-off-by: Guillaume GARDET Cc: Tom Rini Reviewed-by: Tom Rini diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h index 6c33804..ef5a69d 100644 --- a/include/configs/ti_omap4_common.h +++ b/include/configs/ti_omap4_common.h @@ -166,9 +166,6 @@ #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20)) -/* SPL: Allow to use an EXT partition */ -#define CONFIG_SPL_EXT_SUPPORT - #ifdef CONFIG_NAND #define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */ #endif -- cgit v0.10.2 From 67055bee25c2add9cece7ceb9967bb67df806529 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Tue, 16 Jun 2015 08:29:01 -0500 Subject: ARM: DRA7: Change configuration to prevent DDR reset control from EMIF DRA7/AM57xx devices can be operated in many different configurations. When the SoC is supposed to support a configuration where low power mode state may involve the SoC completely powered off and DDR is in self refresh, SoC EMIF controller should not be the master of the reset signal and an external entity might be in control of things. The default configuration of Linux on TI evms involve not powering off the voltage rails (due to various reasons including reliability concerns) and must not allow DDR reset to be controlled by EMIF. On platforms where external entity might control the reset signal, this configuration will be a "dont care". Fixes: 536d87470869 ("ARM: DRA7: Update DDR IO registers") Tested-by: Keerthy Acked-by: Brad Griffis Signed-off-by: Nishanth Menon Reviewed-by: Tom Rini diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c index f1a59a3..3a723ca 100644 --- a/arch/arm/cpu/armv7/omap5/hw_data.c +++ b/arch/arm/cpu/armv7/omap5/hw_data.c @@ -602,8 +602,8 @@ const struct ctrl_ioregs ioregs_dra7xx_es1 = { .ctrl_ddrio_0 = 0x00094A40, .ctrl_ddrio_1 = 0x04A52000, .ctrl_ddrio_2 = 0x84210000, - .ctrl_emif_sdram_config_ext = 0x0001C127, - .ctrl_emif_sdram_config_ext_final = 0x0001C127, + .ctrl_emif_sdram_config_ext = 0x0001C1A7, + .ctrl_emif_sdram_config_ext_final = 0x0001C1A7, .ctrl_ddr_ctrl_ext_0 = 0xA2000000, }; @@ -614,8 +614,8 @@ const struct ctrl_ioregs ioregs_dra72x_es1 = { .ctrl_ddrio_0 = 0x00094A40, .ctrl_ddrio_1 = 0x04A52000, .ctrl_ddrio_2 = 0x84210000, - .ctrl_emif_sdram_config_ext = 0x0001C127, - .ctrl_emif_sdram_config_ext_final = 0x0001C127, + .ctrl_emif_sdram_config_ext = 0x0001C1A7, + .ctrl_emif_sdram_config_ext_final = 0x0001C1A7, .ctrl_ddr_ctrl_ext_0 = 0xA2000000, }; -- cgit v0.10.2 From 46a14a6383a70ce713143f2781ad60373d257f65 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Tue, 16 Jun 2015 20:23:37 +0530 Subject: am43xx: Update CONFIG_SPL_TEXT_BASE With 1.2 silicon this is now the documented starting usable point for downloading images to (and corrects a problem with peripheral booting with prior silicon). Prior silicon is OK using this address as well. Signed-off-by: Tom Rini Signed-off-by: Mugunthan V N diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 9d65111..ade7151 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -42,7 +42,7 @@ #define CONFIG_POWER_TPS62362 /* SPL defines. */ -#define CONFIG_SPL_TEXT_BASE 0x40300350 +#define CONFIG_SPL_TEXT_BASE 0x402F4000 #define CONFIG_SPL_MAX_SIZE (220 << 10) /* 220KB */ #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20)) -- cgit v0.10.2 From aee119bd70b8200739182f9abcdb4b7b634b73c2 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Tue, 16 Jun 2015 20:23:38 +0530 Subject: am43xx_evm: add usb host boot support While booting via usb host mode, ROM uses DMA to copy MLO over USB so ARM internal RAM cannot be used. Adding USB host boot support by introducing new config target which sets SPL_TEXT_BASE to OCMC ram. Signed-off-by: Mugunthan V N Reviewed-by: Tom Rini diff --git a/configs/am43xx_evm_usbhost_boot_defconfig b/configs/am43xx_evm_usbhost_boot_defconfig new file mode 100644 index 0000000..071deac --- /dev/null +++ b/configs/am43xx_evm_usbhost_boot_defconfig @@ -0,0 +1,5 @@ +CONFIG_ARM=y +CONFIG_TARGET_AM43XX_EVM=y +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_USB_HOST_SUPPORT" +CONFIG_CMD_NET=y diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index ade7151..e1cd7a8 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -42,7 +42,16 @@ #define CONFIG_POWER_TPS62362 /* SPL defines. */ +#ifdef CONFIG_SPL_USB_HOST_SUPPORT +/* + * For USB host boot, ROM uses DMA for copying MLO from USB storage + * and ARM internal ram is not accessible for DMA, so SPL text base + * should be in OCMC ram + */ +#define CONFIG_SPL_TEXT_BASE 0x40300350 +#else #define CONFIG_SPL_TEXT_BASE 0x402F4000 +#endif #define CONFIG_SPL_MAX_SIZE (220 << 10) /* 220KB */ #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20)) @@ -95,8 +104,8 @@ #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" /* SPL USB Support */ +#ifdef CONFIG_SPL_USB_HOST_SUPPORT #define CONFIG_SPL_USB_SUPPORT -#define CONFIG_SPL_USB_HOST_SUPPORT #define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1 #define CONFIG_CMD_USB @@ -108,6 +117,7 @@ #define CONFIG_OMAP_USB_PHY #define CONFIG_AM437X_USB2PHY2_HOST +#endif /* USB GADGET */ #if !defined(CONFIG_SPL_BUILD) || \ -- cgit v0.10.2 From f4787eab135d31a097a0ec6fbf0b4876d548bf60 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Tue, 16 Jun 2015 20:23:39 +0530 Subject: am43xx_evm: add eth boot support add cpsw ethernet boot mode support to download spl and u-boot.img via tftp protocol. Also adding a seperate config for ethernet boot mode as the default build falcon mode and environment on MMC is defined for ethernet boot mode environment should be set to nowhere. Signed-off-by: Mugunthan V N Reviewed-by: Tom Rini diff --git a/configs/am43xx_evm_ethboot_defconfig b/configs/am43xx_evm_ethboot_defconfig new file mode 100644 index 0000000..5b07cc1 --- /dev/null +++ b/configs/am43xx_evm_ethboot_defconfig @@ -0,0 +1,5 @@ +CONFIG_ARM=y +CONFIG_TARGET_AM43XX_EVM=y +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_ETH_SUPPORT" +CONFIG_CMD_NET=y diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index e1cd7a8..0526bd4 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -317,11 +317,11 @@ #endif +#ifndef CONFIG_SPL_BUILD /* CPSW Ethernet */ #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING #define CONFIG_CMD_MII -#define CONFIG_DRIVER_TI_CPSW #define CONFIG_MII #define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS @@ -331,13 +331,20 @@ #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_NET_RETRY_COUNT 10 #define CONFIG_PHY_GIGE +#endif + +#define CONFIG_DRIVER_TI_CPSW #define CONFIG_PHYLIB #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_NET_VCI_STRING "AM43xx U-Boot SPL" -#define CONFIG_SPL_ETH_SUPPORT +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ETH_SUPPORT) +#undef CONFIG_ENV_IS_IN_FAT +#define CONFIG_ENV_IS_NOWHERE #define CONFIG_SPL_NET_SUPPORT +#endif + #define CONFIG_SYS_RX_ETH_BUFFER 64 /* NAND support */ -- cgit v0.10.2 From 334bbb387f2d369f4cf0b28173f0764c8316fd5b Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Tue, 16 Jun 2015 20:36:05 +0530 Subject: ARM: BeagleBoard-X15: Enable VTT regulator BeagleBoard-X15 uses a vtt regulator for DDR3 termination and this is controlled by gpio7_11. Configuring gpio7_11. Signed-off-by: Lokesh Vutla Reviewed-by: Tom Rini diff --git a/board/ti/beagle_x15/board.c b/board/ti/beagle_x15/board.c index b6c17ec..c7f19c7 100644 --- a/board/ti/beagle_x15/board.c +++ b/board/ti/beagle_x15/board.c @@ -14,6 +14,8 @@ #include #include #include +#include +#include #include #include #include @@ -30,6 +32,9 @@ DECLARE_GLOBAL_DATA_PTR; +/* GPIO 7_11 */ +#define GPIO_DDR_VTT_EN 203 + const struct omap_sysinfo sysinfo = { "Board: BeagleBoard x15\n" }; @@ -404,3 +409,21 @@ int board_eth_init(bd_t *bis) return ret; } #endif + +#ifdef CONFIG_BOARD_EARLY_INIT_F +/* VTT regulator enable */ +static inline void vtt_regulator_enable(void) +{ + if (omap_hw_init_context() == OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL) + return; + + gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en"); + gpio_direction_output(GPIO_DDR_VTT_EN, 1); +} + +int board_early_init_f(void) +{ + vtt_regulator_enable(); + return 0; +} +#endif diff --git a/include/configs/beagle_x15.h b/include/configs/beagle_x15.h index 8d072c6..c5dde99 100644 --- a/include/configs/beagle_x15.h +++ b/include/configs/beagle_x15.h @@ -18,6 +18,8 @@ #define CONFIG_IODELAY_RECALIBRATION #endif +#define CONFIG_BOARD_EARLY_INIT_F + #define CONFIG_NR_DRAM_BANKS 2 #define CONFIG_ENV_SIZE (64 << 10) -- cgit v0.10.2 From 3b10cf120befe9c2e938a7d4e04eb0b545ee347a Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Fri, 19 Jun 2015 20:25:59 +1200 Subject: README: Describe CONFIG_SYS_NO_FLASH Unlike most configuration options defining this actually disables support for a feature (parallel flash). Eventually the logic behind this should probably be flipped so that '#ifndef CONFIG_SYS_NO_FLASH' becomes '#ifdef CONFIG_HAS_PARALLEL_FLASH' but for now lets document the existing behaviour. Signed-off-by: Chris Packham Reviewed-by: Stefan Roese diff --git a/README b/README index 3b406c2..c3fa549 100644 --- a/README +++ b/README @@ -3037,6 +3037,19 @@ CBFS (Coreboot Filesystem) support this is instead controlled by the value of /config/load-environment. +- Parallel Flash support: + CONFIG_SYS_NO_FLASH + + Traditionally U-boot was run on systems with parallel NOR + flash. This option is used to disable support for parallel NOR + flash. This option should be defined if the board does not have + parallel flash. + + If this option is not defined one of the generic flash drivers + (e.g. CONFIG_FLASH_CFI_DRIVER or CONFIG_ST_SMI) must be + selected or the board must provide an implementation of the + flash API (see include/flash.h). + - DataFlash Support: CONFIG_HAS_DATAFLASH -- cgit v0.10.2 From 578056c35d20d2f6e2f6618d9f86628f588932c4 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Mon, 15 Jun 2015 14:56:41 +0200 Subject: siemens,am33x,rastaban: add rastaban config rastaban is a draco version with more flash, more RAM and faster CPU. Number of partitions is the same but rootfs partition is different. Signed-off-by: Samuel Egli Acked-by: Heiko Schocher Reviewed-by: Tom Rini diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ac86518..13f579a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -351,6 +351,11 @@ config TARGET_DXR2 select CPU_V7 select SUPPORT_SPL +config TARGET_RASTABAN + bool "Support rastaban" + select CPU_V7 + select SUPPORT_SPL + config TARGET_PXM2 bool "Support pxm2" select CPU_V7 diff --git a/board/siemens/draco/Kconfig b/board/siemens/draco/Kconfig index d138ece..67fa320 100644 --- a/board/siemens/draco/Kconfig +++ b/board/siemens/draco/Kconfig @@ -29,3 +29,19 @@ config SYS_CONFIG_NAME default "dxr2" endif + +if TARGET_RASTABAN + +config SYS_BOARD + default "draco" + +config SYS_VENDOR + default "siemens" + +config SYS_SOC + default "am33xx" + +config SYS_CONFIG_NAME + default "rastaban" + +endif diff --git a/board/siemens/draco/MAINTAINERS b/board/siemens/draco/MAINTAINERS index f6b68ca..6d9544a 100644 --- a/board/siemens/draco/MAINTAINERS +++ b/board/siemens/draco/MAINTAINERS @@ -6,3 +6,5 @@ F: include/configs/draco.h F: configs/draco_defconfig F: include/configs/dxr2.h F: configs/dxr2_defconfig +F: include/configs/rastaban.h +F: configs/rastaban_defconfig diff --git a/configs/rastaban_defconfig b/configs/rastaban_defconfig new file mode 100644 index 0000000..954f38a --- /dev/null +++ b/configs/rastaban_defconfig @@ -0,0 +1,7 @@ +CONFIG_ARM=y +CONFIG_TARGET_RASTABAN=y +CONFIG_CMD_NET=y +CONFIG_SPL=y +CONFIG_AUTOBOOT_KEYED=y +CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"\" to stop\n" +CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" diff --git a/include/configs/rastaban.h b/include/configs/rastaban.h new file mode 100644 index 0000000..d9dde9c --- /dev/null +++ b/include/configs/rastaban.h @@ -0,0 +1,114 @@ +/* + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * U-Boot file:/include/configs/am335x_evm.h + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_RASTABAN_H +#define __CONFIG_RASTABAN_H + +#include "siemens-am33x-common.h" + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_SYS_MPUCLK 300 +#define DDR_PLL_FREQ 303 +#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC + +/* FWD Button = 27 + * SRV Button = 87 */ +#define BOARD_DFU_BUTTON_GPIO 27 +#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */ +/* In dfu mode keep led1 on */ +#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ + "button_dfu0=27\0" \ + "button_dfu1=87\0" \ + "led0=3,0,1\0" \ + "led1=4,0,0\0" \ + "led2=5,0,1\0" \ + "led3=62,0,1\0" \ + "led4=60,0,1\0" \ + "led5=63,0,1\0" + +#undef CONFIG_DOS_PARTITION +#undef CONFIG_CMD_FAT + +#define CONFIG_BOARD_LATE_INIT + + /* Physical Memory Map */ +#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ + +/* I2C Configuration */ +#define CONFIG_SYS_I2C_SPEED 100000 + +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define EEPROM_ADDR_DDR3 0x90 +#define EEPROM_ADDR_CHIP 0x120 + +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 + +#undef CONFIG_SPL_NET_SUPPORT +#undef CONFIG_SPL_NET_VCI_STRING +#undef CONFIG_SPL_ETH_SUPPORT + +#undef CONFIG_MII +#undef CONFIG_PHY_GIGE +#define CONFIG_PHY_SMSC + +#define CONFIG_FACTORYSET + +/* Watchdog */ +#define CONFIG_OMAP_WATCHDOG + +/* Define own nand partitions */ +#define CONFIG_ENV_OFFSET_REDUND 0x2E0000 +#define CONFIG_ENV_SIZE_REDUND 0x2000 +#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE) + + + +#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V3 + +#ifndef CONFIG_SPL_BUILD + +/* Default env settings */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hostname=rastaban\0" \ + "nand_img_size=0x400000\0" \ + "optargs=\0" \ + "preboot=draco_led 0\0" \ + CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ + CONFIG_ENV_SETTINGS_V2 \ + CONFIG_ENV_SETTINGS_NAND_V2 + +#ifndef CONFIG_RESTORE_FLASH +/* set to negative value for no autoboot */ +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_BOOTCOMMAND \ +"if dfubutton; then " \ + "run dfu_start; " \ + "reset; " \ +"fi;" \ +"run nand_boot;" \ +"run nand_boot_backup;" \ +"reset;" + + +#else +#define CONFIG_BOOTDELAY 0 + +#define CONFIG_BOOTCOMMAND \ + "setenv autoload no; " \ + "dhcp; " \ + "if tftp 80000000 debrick.scr; then " \ + "source 80000000; " \ + "fi" +#endif +#endif /* CONFIG_SPL_BUILD */ +#endif /* ! __CONFIG_RASTABAN_H */ diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 7b602b3..ac4cf68 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -31,7 +31,9 @@ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_BOARD_LATE_INIT #define CONFIG_SYS_NO_FLASH +#ifdef CONFIG_SIEMENS_MACH_TYPE #define CONFIG_MACH_TYPE CONFIG_SIEMENS_MACH_TYPE +#endif #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS @@ -572,6 +574,36 @@ "tftpboot ${loadaddr} ${serverip}:${bootdtb}; " \ "bootm ${kloadaddr} - ${loadaddr}\0" +/* + * Variant 3 partition layout + * chip-size = 512MiB + *| name | size | address area | + *------------------------------------------------------- + *| spl | 128.000 KiB | 0x 0..0x 1ffff | + *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | + *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | + *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | + *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | + *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff | + *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff | + *| rootfs | 300.000 MiB | 0x 360000..0x12f5ffff | + *| mtdoops | 512.000 KiB | 0x12f60000..0x12fdffff | + *|configuration | 104.125 MiB | 0x12fe0000..0x1fffffff | + *------------------------------------------------------- + */ + +#define MTDPARTS_DEFAULT_V3 "mtdparts=" MTDIDS_NAME_STR ":" \ + "128k(spl)," \ + "128k(spl.backup1)," \ + "128k(spl.backup2)," \ + "128k(spl.backup3)," \ + "1920k(u-boot)," \ + "512k(u-boot.env0)," \ + "512k(u-boot.env1)," \ + "300m(rootfs)," \ + "512k(mtdoops)," \ + "-(configuration)" + #define CONFIG_NAND_OMAP_GPMC #define CONFIG_NAND_OMAP_ELM -- cgit v0.10.2 From 8c65a2fae89ec10f30acdf5bbf42f799f86c3f3d Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Mon, 15 Jun 2015 14:57:15 +0200 Subject: siemens,am33x,thuban: rename dxr2 to thuban Update new naming scheme. Signed-off-by: Samuel Egli Acked-by: Heiko Schocher Reviewed-by: Tom Rini diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 13f579a..0829235 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -346,8 +346,8 @@ config TARGET_DRACO select CPU_V7 select SUPPORT_SPL -config TARGET_DXR2 - bool "Support dxr2" +config TARGET_THUBAN + bool "Support thuban" select CPU_V7 select SUPPORT_SPL diff --git a/board/siemens/draco/Kconfig b/board/siemens/draco/Kconfig index 67fa320..819d187 100644 --- a/board/siemens/draco/Kconfig +++ b/board/siemens/draco/Kconfig @@ -14,7 +14,7 @@ config SYS_CONFIG_NAME endif -if TARGET_DXR2 +if TARGET_THUBAN config SYS_BOARD default "draco" @@ -26,7 +26,7 @@ config SYS_SOC default "am33xx" config SYS_CONFIG_NAME - default "dxr2" + default "thuban" endif diff --git a/board/siemens/draco/MAINTAINERS b/board/siemens/draco/MAINTAINERS index 6d9544a..484dd73 100644 --- a/board/siemens/draco/MAINTAINERS +++ b/board/siemens/draco/MAINTAINERS @@ -4,7 +4,7 @@ S: Maintained F: board/siemens/draco/ F: include/configs/draco.h F: configs/draco_defconfig -F: include/configs/dxr2.h -F: configs/dxr2_defconfig +F: include/configs/thuban.h +F: configs/thuban_defconfig F: include/configs/rastaban.h F: configs/rastaban_defconfig diff --git a/configs/dxr2_defconfig b/configs/dxr2_defconfig deleted file mode 100644 index 1041031..0000000 --- a/configs/dxr2_defconfig +++ /dev/null @@ -1,7 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_DXR2=y -CONFIG_CMD_NET=y -CONFIG_SPL=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"\" to stop\n" -CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" diff --git a/configs/thuban_defconfig b/configs/thuban_defconfig new file mode 100644 index 0000000..5fab571 --- /dev/null +++ b/configs/thuban_defconfig @@ -0,0 +1,7 @@ +CONFIG_ARM=y +CONFIG_TARGET_THUBAN=y +CONFIG_CMD_NET=y +CONFIG_SPL=y +CONFIG_AUTOBOOT_KEYED=y +CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"\" to stop\n" +CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" diff --git a/include/configs/dxr2.h b/include/configs/dxr2.h deleted file mode 100644 index fa74070..0000000 --- a/include/configs/dxr2.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * (C) Copyright 2013 Siemens Schweiz AG - * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * Based on: - * U-Boot file:/include/configs/am335x_evm.h - * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_DXR2_H -#define __CONFIG_DXR2_H - -#define CONFIG_SIEMENS_DXR2 -#define MACH_TYPE_DXR2 4315 -#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_DXR2 - -#include "siemens-am33x-common.h" - -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_SYS_MPUCLK 300 -#define DDR_PLL_FREQ 303 -#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC - -#define BOARD_DFU_BUTTON_GPIO 27 -#define BOARD_DFU_BUTTON_LED 64 /* red LED */ -#define BOARD_STATUS_LED 103 /* green LED */ -#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */ - -#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ - "button_dfu0=27\0" \ - "led0=103,1,0\0" \ - "led1=64,0,1\0" - -#undef CONFIG_DOS_PARTITION -#undef CONFIG_CMD_FAT - -#define CONFIG_BOARD_LATE_INIT - - /* Physical Memory Map */ -#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ - -/* I2C Configuration */ -#define CONFIG_SYS_I2C_SPEED 100000 - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define EEPROM_ADDR_DDR3 0x90 -#define EEPROM_ADDR_CHIP 0x120 - -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 - -#undef CONFIG_SPL_NET_SUPPORT -#undef CONFIG_SPL_NET_VCI_STRING -#undef CONFIG_SPL_ETH_SUPPORT - -#undef CONFIG_MII -#undef CONFIG_PHY_GIGE -#define CONFIG_PHY_SMSC - -#define CONFIG_FACTORYSET - -/* Watchdog */ -#define CONFIG_OMAP_WATCHDOG - -/* Define own nand partitions */ -#define CONFIG_ENV_OFFSET_REDUND 0x2E0000 -#define CONFIG_ENV_SIZE_REDUND 0x2000 -#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE) - - -#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V2 - -#ifndef CONFIG_SPL_BUILD - -/* Default env settings */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "hostname=dxr2\0" \ - "nand_img_size=0x400000\0" \ - "optargs=\0" \ - "preboot=draco_led 0\0" \ - CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ - CONFIG_ENV_SETTINGS_V2 \ - CONFIG_ENV_SETTINGS_NAND_V2 - -#ifndef CONFIG_RESTORE_FLASH -/* set to negative value for no autoboot */ -#define CONFIG_BOOTDELAY 3 - -#define CONFIG_BOOTCOMMAND \ -"if dfubutton; then " \ - "run dfu_start; " \ - "reset; " \ -"fi;" \ -"run nand_boot;" \ -"run nand_boot_backup;" \ -"reset;" - - -#else -#define CONFIG_BOOTDELAY 0 - -#define CONFIG_BOOTCOMMAND \ - "setenv autoload no; " \ - "dhcp; " \ - "if tftp 80000000 debrick.scr; then " \ - "source 80000000; " \ - "fi" -#endif -#endif /* CONFIG_SPL_BUILD */ -#endif /* ! __CONFIG_DXR2_H */ diff --git a/include/configs/thuban.h b/include/configs/thuban.h new file mode 100644 index 0000000..4024468 --- /dev/null +++ b/include/configs/thuban.h @@ -0,0 +1,106 @@ +/* + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * U-Boot file:/include/configs/am335x_evm.h + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_THUBAN_H +#define __CONFIG_THUBAN_H + +#include "siemens-am33x-common.h" + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_SYS_MPUCLK 300 +#define DDR_PLL_FREQ 303 +#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC + +#define BOARD_DFU_BUTTON_GPIO 27 /* Use as default */ +#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */ + +#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ + "button_dfu0=27\0" \ + "led0=103,1,0\0" \ + "led1=64,0,1\0" + +#undef CONFIG_DOS_PARTITION +#undef CONFIG_CMD_FAT + +#define CONFIG_BOARD_LATE_INIT + + /* Physical Memory Map */ +#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ + +/* I2C Configuration */ +#define CONFIG_SYS_I2C_SPEED 100000 + +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define EEPROM_ADDR_DDR3 0x90 +#define EEPROM_ADDR_CHIP 0x120 + +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 + +#undef CONFIG_SPL_NET_SUPPORT +#undef CONFIG_SPL_NET_VCI_STRING +#undef CONFIG_SPL_ETH_SUPPORT + +#undef CONFIG_MII +#undef CONFIG_PHY_GIGE +#define CONFIG_PHY_SMSC + +#define CONFIG_FACTORYSET + +/* Watchdog */ +#define CONFIG_OMAP_WATCHDOG + +/* Define own nand partitions */ +#define CONFIG_ENV_OFFSET_REDUND 0x2E0000 +#define CONFIG_ENV_SIZE_REDUND 0x2000 +#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE) + + +#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V2 + +#ifndef CONFIG_SPL_BUILD + +/* Default env settings */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hostname=thuban\0" \ + "nand_img_size=0x400000\0" \ + "optargs=\0" \ + "preboot=draco_led 0\0" \ + CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ + CONFIG_ENV_SETTINGS_V2 \ + CONFIG_ENV_SETTINGS_NAND_V2 + +#ifndef CONFIG_RESTORE_FLASH +/* set to negative value for no autoboot */ +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_BOOTCOMMAND \ +"if dfubutton; then " \ + "run dfu_start; " \ + "reset; " \ +"fi;" \ +"run nand_boot;" \ +"run nand_boot_backup;" \ +"reset;" + + +#else +#define CONFIG_BOOTDELAY 0 + +#define CONFIG_BOOTCOMMAND \ + "setenv autoload no; " \ + "dhcp; " \ + "if tftp 80000000 debrick.scr; then " \ + "source 80000000; " \ + "fi" +#endif +#endif /* CONFIG_SPL_BUILD */ +#endif /* ! __CONFIG_THUBAN_H */ -- cgit v0.10.2 From 9f1b4456c9076279a92005acb821e7bd3fc01880 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 19 Jun 2015 23:39:41 +0200 Subject: mmc: bcm2835_sdhci: Restore original delay behavior MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Patch 33fe2fb8df01647f97a7bce96a1c7781a7f6d253 titled "mmc: bcm283x: Remove get_timer_us() from mmc driver" incorrectly replaced ad-hoc get_timer_us() function with a plain get_timer(). The get_timer() operates in mSec units instead of uSec though, which caused very slow operation of the driver. Restore the original behavior of the driver, but avoid get_timer_us() and use timer_get_us() instead. The later is part of the standard API. Signed-off-by: Marek Vasut Cc: Jakub Kiciński Cc: Stephen Warren Tested-by: Jakub Kicinski diff --git a/drivers/mmc/bcm2835_sdhci.c b/drivers/mmc/bcm2835_sdhci.c index 078ef05..227d2df 100644 --- a/drivers/mmc/bcm2835_sdhci.c +++ b/drivers/mmc/bcm2835_sdhci.c @@ -69,11 +69,11 @@ static inline void bcm2835_sdhci_raw_writel(struct sdhci_host *host, u32 val, * (Which is just as well - otherwise we'd have to nobble the DMA engine * too) */ - while (get_timer(bcm_host->last_write) < bcm_host->twoticks_delay) + while (timer_get_us() - bcm_host->last_write < bcm_host->twoticks_delay) ; writel(val, host->ioaddr + reg); - bcm_host->last_write = get_timer(0); + bcm_host->last_write = timer_get_us(); } static inline u32 bcm2835_sdhci_raw_readl(struct sdhci_host *host, int reg) -- cgit v0.10.2 From 22e04faaab13dea12975d9be99491db7ddff8bdd Mon Sep 17 00:00:00 2001 From: Joe Hershberger Date: Mon, 22 Jun 2015 16:15:24 -0500 Subject: mtd: spi: Add the SPI_FLASH config to Kconfig This config needs to be available in the Kconfig to allow it to be removed from arch defaults. Signed-off-by: Joe Hershberger diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig index ac6d09f..40a7981 100644 --- a/drivers/mtd/spi/Kconfig +++ b/drivers/mtd/spi/Kconfig @@ -1,3 +1,12 @@ +config SPI_FLASH + bool "Enable SPI Flash support" + help + Enable the legacy SPI flash support. This will include basic + standard support for things like probing, read / write, and + erasing through the MTD layer. + + If unsure, say N + config DM_SPI_FLASH bool "Enable Driver Model for SPI flash" depends on DM && DM_SPI -- cgit v0.10.2 From f38bec9f15ab04014b84b34b6aba246d5340e806 Mon Sep 17 00:00:00 2001 From: Joe Hershberger Date: Mon, 22 Jun 2015 16:15:25 -0500 Subject: common: Fix comment for saveenv in Kconfig The help for this was simply copied from another command. Update it to reflect the command. Signed-off-by: Joe Hershberger diff --git a/common/Kconfig b/common/Kconfig index f6478fa..0ccdf62 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -188,7 +188,8 @@ config CMD_EDITENV config CMD_SAVEENV bool "saveenv" help - Run the command in the given environment variable. + Save all environment variables into the compiled-in persistent + storage. endmenu -- cgit v0.10.2 From 6aab5ae921958722cd577a1bdc5748969e1f7917 Mon Sep 17 00:00:00 2001 From: Joe Hershberger Date: Mon, 22 Jun 2015 16:15:26 -0500 Subject: common: Add the CMD_ENV_EXISTS config to Kconfig This command needs to exist in the Kconfig so that it can be moved from the config_cmd_default.h. Signed-off-by: Joe Hershberger diff --git a/common/Kconfig b/common/Kconfig index 0ccdf62..cb14592 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -191,6 +191,12 @@ config CMD_SAVEENV Save all environment variables into the compiled-in persistent storage. +config CMD_ENV_EXISTS + bool "env exists" + help + Check if a variable is defined in the environment for use in + shell scripting. + endmenu menu "Memory commands" -- cgit v0.10.2 From 3c85c8b9f91334b001837123ffaba0a17cde51eb Mon Sep 17 00:00:00 2001 From: Joe Hershberger Date: Mon, 22 Jun 2015 16:15:28 -0500 Subject: a3m071: Add needed dependency on LIB_RAND Boards using link-local need lib rand. When link-local is moved to Kconfig, this dependency will be described there. Signed-off-by: Joe Hershberger diff --git a/configs/a3m071_defconfig b/configs/a3m071_defconfig index 1a052e4..c5df596 100644 --- a/configs/a3m071_defconfig +++ b/configs/a3m071_defconfig @@ -1,5 +1,6 @@ CONFIG_PPC=y +CONFIG_CMD_NET=y CONFIG_MPC5xxx=y CONFIG_TARGET_A3M071=y CONFIG_SPL=y -CONFIG_CMD_NET=y +CONFIG_LIB_RAND=y diff --git a/configs/a4m2k_defconfig b/configs/a4m2k_defconfig index 6efb1fd..de47756 100644 --- a/configs/a4m2k_defconfig +++ b/configs/a4m2k_defconfig @@ -1,6 +1,7 @@ CONFIG_PPC=y +CONFIG_CMD_NET=y CONFIG_MPC5xxx=y CONFIG_TARGET_A3M071=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="A4M2K" -CONFIG_CMD_NET=y +CONFIG_LIB_RAND=y -- cgit v0.10.2 From c9bb942e2f91d9f8e5f25ed1961eba2d64f65b8d Mon Sep 17 00:00:00 2001 From: Joe Hershberger Date: Mon, 22 Jun 2015 16:15:29 -0500 Subject: Move default y configs out of arch/board Kconfig Some archs/boards specify their own default by pre-defining the config which causes the Kconfig system to mix up the order of the configs in the defconfigs... This will cause merge pain if allowed to proliferate. Remove the configs that behave this way from the archs. A few configs still remain, but that is because they only exist as defaults and do not have a proper Kconfig entry. Those appear to be: SPIFLASH DISPLAY_BOARDINFO Signed-off-by: Joe Hershberger [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates, drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM] Signed-off-by: Tom Rini diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 67d28d3..925e312 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -4,9 +4,6 @@ menu "ARC architecture" config SYS_ARCH default "arc" -config USE_PRIVATE_LIBGCC - default y - config SYS_CPU default "arcv1" if ISA_ARCOMPACT default "arcv2" if ISA_ARCV2 diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig index 3ca7128..4a7d82f 100644 --- a/arch/arm/cpu/armv7/exynos/Kconfig +++ b/arch/arm/cpu/armv7/exynos/Kconfig @@ -74,9 +74,6 @@ endchoice config SYS_SOC default "exynos" -config DM_USB - default y - source "board/samsung/smdkv310/Kconfig" source "board/samsung/trats/Kconfig" source "board/samsung/universal_c210/Kconfig" diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig index 99779df..2315a13 100644 --- a/arch/arm/mach-bcm283x/Kconfig +++ b/arch/arm/mach-bcm283x/Kconfig @@ -15,9 +15,6 @@ config TARGET_RPI_2 endchoice -config PHYS_TO_BUS - default y - config SYS_BOARD default "rpi" if TARGET_RPI default "rpi_2" if TARGET_RPI_2 diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index f5b5ee9..54bd648 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -21,18 +21,6 @@ endchoice config SYS_MALLOC_F_LEN default 0x1800 -config USE_PRIVATE_LIBGCC - default y - -config DM_USB - default y - -config SPL_DM - default y - -config SPL_DISABLE_OF_CONTROL - default y - source "arch/arm/mach-tegra/tegra20/Kconfig" source "arch/arm/mach-tegra/tegra30/Kconfig" source "arch/arm/mach-tegra/tegra114/Kconfig" diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index feb2f68..7f7e258 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -8,9 +8,6 @@ config SYS_CPU default "mips32" if CPU_MIPS32_R1 || CPU_MIPS32_R2 default "mips64" if CPU_MIPS64_R1 || CPU_MIPS64_R2 -config USE_PRIVATE_LIBGCC - default y - choice prompt "Target select" optional diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 2f7a2fe..6ac22af 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -125,9 +125,6 @@ config SYS_CPU default "sh3" if CPU_SH3 default "sh4" if CPU_SH4 -config USE_PRIVATE_LIBGCC - default y - source "board/alphaproject/ap_sh4a_4a/Kconfig" source "board/espt/Kconfig" source "board/mpr2/Kconfig" diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 3506ba2..20083e6 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -4,12 +4,6 @@ menu "x86 architecture" config SYS_ARCH default "x86" -config USE_PRIVATE_LIBGCC - default y - -config SYS_VSNPRINTF - default y - choice prompt "Mainboard vendor" default VENDOR_EMULATION @@ -335,13 +329,4 @@ config PCIE_ECAM_BASE assigned to PCI devices - i.e. the memory and prefetch regions, as passed to pci_set_region(). -config BOOTSTAGE - default y - -config BOOTSTAGE_REPORT - default y - -config CMD_BOOTSTAGE - default y - endmenu diff --git a/board/Arcturus/ucp1020/Kconfig b/board/Arcturus/ucp1020/Kconfig index feca03a..fe2c3be 100644 --- a/board/Arcturus/ucp1020/Kconfig +++ b/board/Arcturus/ucp1020/Kconfig @@ -12,14 +12,6 @@ config SYS_CONFIG_NAME string default "UCP1020" -config SPI_FLASH - bool - default y - -config SPI_PCI - bool - default y - choice prompt "Target image select" diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index b2eca51..aa44f50 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -566,25 +566,4 @@ config GMAC_TX_DELAY ---help--- Set the GMAC Transmit Clock Delay Chain value. -config SYS_MALLOC_CLEAR_ON_INIT - default n - -config NETDEVICES - default y - -config DM_ETH - default y - -config DM_SERIAL - default y - -config DM_USB - default y if !USB_MUSB_SUNXI - -config CMD_SETEXPR - default y - -config CMD_NET - default y - endif diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig index 971e11a..572adb8 100644 --- a/configs/A10-OLinuXino-Lime_defconfig +++ b/configs/A10-OLinuXino-Lime_defconfig @@ -5,5 +5,13 @@ CONFIG_DRAM_CLK=480 CONFIG_DRAM_EMR1=4 CONFIG_SYS_CLK_FREQ=912000000 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig index d4953aa..a24826b 100644 --- a/configs/A10s-OLinuXino-M_defconfig +++ b/configs/A10s-OLinuXino-M_defconfig @@ -7,5 +7,13 @@ CONFIG_MMC1_CD_PIN="PG13" CONFIG_MMC_SUNXI_SLOT_EXTRA=1 CONFIG_USB1_VBUS_PIN="PB10" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-olinuxino-micro" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,SUNXI_EMAC,USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig index 4bee362..085bd38 100644 --- a/configs/A13-OLinuXinoM_defconfig +++ b/configs/A13-OLinuXinoM_defconfig @@ -11,5 +11,13 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo CONFIG_VIDEO_LCD_POWER="PB10" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino-micro" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig index 43d5fa1..4535ce4 100644 --- a/configs/A13-OLinuXino_defconfig +++ b/configs/A13-OLinuXino_defconfig @@ -12,5 +12,13 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo CONFIG_VIDEO_LCD_POWER="AXP0-0" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER,USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig index 78eee6a..7c4e005 100644 --- a/configs/A20-OLinuXino-Lime2_defconfig +++ b/configs/A20-OLinuXino-Lime2_defconfig @@ -6,6 +6,14 @@ CONFIG_MMC0_CD_PIN="PH1" CONFIG_USB0_VBUS_PIN="PC17" CONFIG_USB0_VBUS_DET="PH5" CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig index 0b64d94..c875130 100644 --- a/configs/A20-OLinuXino-Lime_defconfig +++ b/configs/A20-OLinuXino-Lime_defconfig @@ -3,6 +3,14 @@ CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=480 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig index e61067d..315c7f6 100644 --- a/configs/A20-OLinuXino_MICRO_defconfig +++ b/configs/A20-OLinuXino_MICRO_defconfig @@ -7,6 +7,14 @@ CONFIG_MMC3_CD_PIN="PH11" CONFIG_MMC_SUNXI_SLOT_EXTRA=3 CONFIG_VIDEO_VGA=y CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/Ainol_AW1_defconfig b/configs/Ainol_AW1_defconfig index 94c5443..1f7f891 100644 --- a/configs/Ainol_AW1_defconfig +++ b/configs/Ainol_AW1_defconfig @@ -13,5 +13,11 @@ CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-ainol-aw1" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y diff --git a/configs/Ampe_A76_defconfig b/configs/Ampe_A76_defconfig index 63307b8..f20cad8 100644 --- a/configs/Ampe_A76_defconfig +++ b/configs/Ampe_A76_defconfig @@ -12,5 +12,11 @@ CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-ampe-a76" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y diff --git a/configs/Auxtek-T004_defconfig b/configs/Auxtek-T004_defconfig index 6e320bd..7203e01 100644 --- a/configs/Auxtek-T004_defconfig +++ b/configs/Auxtek-T004_defconfig @@ -4,5 +4,13 @@ CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=432 CONFIG_USB1_VBUS_PIN="PG13" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t004" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/B4420QDS_NAND_defconfig b/configs/B4420QDS_NAND_defconfig index 5353acf..4f53a9e 100644 --- a/configs/B4420QDS_NAND_defconfig +++ b/configs/B4420QDS_NAND_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_B4420,RAMBOOT_PBL,SPL_FSL_PBL,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/B4420QDS_SPIFLASH_defconfig b/configs/B4420QDS_SPIFLASH_defconfig index 557c600..04d5ce3 100644 --- a/configs/B4420QDS_SPIFLASH_defconfig +++ b/configs/B4420QDS_SPIFLASH_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_B4860QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_B4420,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/B4420QDS_defconfig b/configs/B4420QDS_defconfig index cc11e03..d4b95c5 100644 --- a/configs/B4420QDS_defconfig +++ b/configs/B4420QDS_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_B4860QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_B4420" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/B4860QDS_NAND_defconfig b/configs/B4860QDS_NAND_defconfig index 6ae1a2e..af5e938 100644 --- a/configs/B4860QDS_NAND_defconfig +++ b/configs/B4860QDS_NAND_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,RAMBOOT_PBL,SPL_FSL_PBL,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/B4860QDS_SECURE_BOOT_defconfig b/configs/B4860QDS_SECURE_BOOT_defconfig index 5c276c3..f464d18 100644 --- a/configs/B4860QDS_SECURE_BOOT_defconfig +++ b/configs/B4860QDS_SECURE_BOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_B4860QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/B4860QDS_SPIFLASH_defconfig b/configs/B4860QDS_SPIFLASH_defconfig index ea8101d..28157a3 100644 --- a/configs/B4860QDS_SPIFLASH_defconfig +++ b/configs/B4860QDS_SPIFLASH_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_B4860QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/B4860QDS_SRIO_PCIE_BOOT_defconfig b/configs/B4860QDS_SRIO_PCIE_BOOT_defconfig index 3390943..e56d265 100644 --- a/configs/B4860QDS_SRIO_PCIE_BOOT_defconfig +++ b/configs/B4860QDS_SRIO_PCIE_BOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_B4860QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/B4860QDS_defconfig b/configs/B4860QDS_defconfig index 50f4948..a4c2eb6 100644 --- a/configs/B4860QDS_defconfig +++ b/configs/B4860QDS_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_B4860QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/BSC9131RDB_NAND_SYSCLK100_defconfig b/configs/BSC9131RDB_NAND_SYSCLK100_defconfig index 4ebe4a4..36b9a1f 100644 --- a/configs/BSC9131RDB_NAND_SYSCLK100_defconfig +++ b/configs/BSC9131RDB_NAND_SYSCLK100_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,NAND,SYS_CLK_100" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/BSC9131RDB_NAND_defconfig b/configs/BSC9131RDB_NAND_defconfig index 7360bd0..8fdc41d 100644 --- a/configs/BSC9131RDB_NAND_defconfig +++ b/configs/BSC9131RDB_NAND_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/BSC9131RDB_SPIFLASH_SYSCLK100_defconfig b/configs/BSC9131RDB_SPIFLASH_SYSCLK100_defconfig index b64d172..abdf794 100644 --- a/configs/BSC9131RDB_SPIFLASH_SYSCLK100_defconfig +++ b/configs/BSC9131RDB_SPIFLASH_SYSCLK100_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9131RDB=y CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,SPIFLASH,SYS_CLK_100" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/BSC9131RDB_SPIFLASH_defconfig b/configs/BSC9131RDB_SPIFLASH_defconfig index 5f4028b..8cfe843 100644 --- a/configs/BSC9131RDB_SPIFLASH_defconfig +++ b/configs/BSC9131RDB_SPIFLASH_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9131RDB=y CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,SPIFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig b/configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig index 44a7161..d6e3fbe 100644 --- a/configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig +++ b/configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND_SECBOOT,SYS_CLK_100_DDR_100,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_NAND_DDRCLK100_defconfig b/configs/BSC9132QDS_NAND_DDRCLK100_defconfig index 439369f..5c5b412 100644 --- a/configs/BSC9132QDS_NAND_DDRCLK100_defconfig +++ b/configs/BSC9132QDS_NAND_DDRCLK100_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND,SYS_CLK_100_DDR_100" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig b/configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig index fcae999..3e82751 100644 --- a/configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig +++ b/configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND_SECBOOT,SYS_CLK_100_DDR_133,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_NAND_DDRCLK133_defconfig b/configs/BSC9132QDS_NAND_DDRCLK133_defconfig index de0f545..e57d006 100644 --- a/configs/BSC9132QDS_NAND_DDRCLK133_defconfig +++ b/configs/BSC9132QDS_NAND_DDRCLK133_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND,SYS_CLK_100_DDR_133" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig b/configs/BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig index 68d1c41..79e3946 100644 --- a/configs/BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig +++ b/configs/BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SYS_CLK_100_DDR_100,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_NOR_DDRCLK100_defconfig b/configs/BSC9132QDS_NOR_DDRCLK100_defconfig index b7052e5..2e4b37d 100644 --- a/configs/BSC9132QDS_NOR_DDRCLK100_defconfig +++ b/configs/BSC9132QDS_NOR_DDRCLK100_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SYS_CLK_100_DDR_100" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig b/configs/BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig index 44ba152..bb45b73 100644 --- a/configs/BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig +++ b/configs/BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SYS_CLK_100_DDR_133,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_NOR_DDRCLK133_defconfig b/configs/BSC9132QDS_NOR_DDRCLK133_defconfig index 1298b7f..48a9849 100644 --- a/configs/BSC9132QDS_NOR_DDRCLK133_defconfig +++ b/configs/BSC9132QDS_NOR_DDRCLK133_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SYS_CLK_100_DDR_133" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_SDCARD_DDRCLK100_SECURE_defconfig b/configs/BSC9132QDS_SDCARD_DDRCLK100_SECURE_defconfig index 8a2c495..71f7d69 100644 --- a/configs/BSC9132QDS_SDCARD_DDRCLK100_SECURE_defconfig +++ b/configs/BSC9132QDS_SDCARD_DDRCLK100_SECURE_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SDCARD,SYS_CLK_100_DDR_100,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_SDCARD_DDRCLK100_defconfig b/configs/BSC9132QDS_SDCARD_DDRCLK100_defconfig index 1fceceb..3a424d7 100644 --- a/configs/BSC9132QDS_SDCARD_DDRCLK100_defconfig +++ b/configs/BSC9132QDS_SDCARD_DDRCLK100_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SDCARD,SYS_CLK_100_DDR_100" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_SDCARD_DDRCLK133_SECURE_defconfig b/configs/BSC9132QDS_SDCARD_DDRCLK133_SECURE_defconfig index f1a1ead..d1668f1 100644 --- a/configs/BSC9132QDS_SDCARD_DDRCLK133_SECURE_defconfig +++ b/configs/BSC9132QDS_SDCARD_DDRCLK133_SECURE_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SDCARD,SYS_CLK_100_DDR_133,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_SDCARD_DDRCLK133_defconfig b/configs/BSC9132QDS_SDCARD_DDRCLK133_defconfig index d1d8381..63d59d1 100644 --- a/configs/BSC9132QDS_SDCARD_DDRCLK133_defconfig +++ b/configs/BSC9132QDS_SDCARD_DDRCLK133_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SDCARD,SYS_CLK_100_DDR_133" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig b/configs/BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig index 2262a6c..e98df30 100644 --- a/configs/BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig +++ b/configs/BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_100,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_SPIFLASH_DDRCLK100_defconfig b/configs/BSC9132QDS_SPIFLASH_DDRCLK100_defconfig index a755f4c..28ded86 100644 --- a/configs/BSC9132QDS_SPIFLASH_DDRCLK100_defconfig +++ b/configs/BSC9132QDS_SPIFLASH_DDRCLK100_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_100" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig b/configs/BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig index 3607060..89a940a 100644 --- a/configs/BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig +++ b/configs/BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_133,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_SPIFLASH_DDRCLK133_defconfig b/configs/BSC9132QDS_SPIFLASH_DDRCLK133_defconfig index 22ed151..449ca4f 100644 --- a/configs/BSC9132QDS_SPIFLASH_DDRCLK133_defconfig +++ b/configs/BSC9132QDS_SPIFLASH_DDRCLK133_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_133" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig index 904d27d..4b6bc20 100644 --- a/configs/Bananapi_defconfig +++ b/configs/Bananapi_defconfig @@ -4,6 +4,14 @@ CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=432 CONFIG_GMAC_TX_DELAY=3 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig index 7b7556b..8833d1b 100644 --- a/configs/Bananapro_defconfig +++ b/configs/Bananapro_defconfig @@ -6,6 +6,14 @@ CONFIG_USB1_VBUS_PIN="PH0" CONFIG_USB2_VBUS_PIN="PH1" CONFIG_GMAC_TX_DELAY=3 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapro" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/C29XPCIE_NAND_defconfig b/configs/C29XPCIE_NAND_defconfig index c788f60..5a993b7 100644 --- a/configs/C29XPCIE_NAND_defconfig +++ b/configs/C29XPCIE_NAND_defconfig @@ -6,3 +6,4 @@ CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/C29XPCIE_NOR_SECBOOT_defconfig b/configs/C29XPCIE_NOR_SECBOOT_defconfig index 21a8947..eb43932 100644 --- a/configs/C29XPCIE_NOR_SECBOOT_defconfig +++ b/configs/C29XPCIE_NOR_SECBOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_C29XPCIE=y CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig b/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig index cabe2af..20ea17e 100644 --- a/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig +++ b/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_C29XPCIE=y CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,SPIFLASH,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/C29XPCIE_SPIFLASH_defconfig b/configs/C29XPCIE_SPIFLASH_defconfig index baa97a0..ea7b9b0 100644 --- a/configs/C29XPCIE_SPIFLASH_defconfig +++ b/configs/C29XPCIE_SPIFLASH_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_C29XPCIE=y CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,SPIFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/C29XPCIE_defconfig b/configs/C29XPCIE_defconfig index 9fada48..7894a47 100644 --- a/configs/C29XPCIE_defconfig +++ b/configs/C29XPCIE_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_C29XPCIE=y CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/CPCI4052_defconfig b/configs/CPCI4052_defconfig index 93ab5b0..5ac0170 100644 --- a/configs/CPCI4052_defconfig +++ b/configs/CPCI4052_defconfig @@ -1,7 +1,7 @@ CONFIG_PPC=y -CONFIG_CMD_NET=y CONFIG_4xx=y CONFIG_TARGET_CPCI4052=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_NET=y diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig index 850d70d..184cdeb 100644 --- a/configs/CSQ_CS908_defconfig +++ b/configs/CSQ_CS908_defconfig @@ -5,8 +5,16 @@ CONFIG_DRAM_CLK=432 CONFIG_USB1_VBUS_PIN="" CONFIG_USB2_VBUS_PIN="" CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-cs908" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_SERIAL=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3300 +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig index 819b353..5895b7e 100644 --- a/configs/Chuwi_V7_CW0825_defconfig +++ b/configs/Chuwi_V7_CW0825_defconfig @@ -12,8 +12,14 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM=y CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-chuwi-v7-cw0825" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y CONFIG_VIDEO_LCD_SPI_CS="PA0" CONFIG_VIDEO_LCD_SPI_SCLK="PA1" CONFIG_VIDEO_LCD_SPI_MOSI="PA2" diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig index e6bed2d..6a64568 100644 --- a/configs/Colombus_defconfig +++ b/configs/Colombus_defconfig @@ -5,7 +5,15 @@ CONFIG_DRAM_CLK=240 CONFIG_DRAM_ZQ=251 CONFIG_USB1_VBUS_PIN="" CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-colombus" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_SERIAL=y CONFIG_AXP221_ALDO1_VOLT=3300 +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/Cubieboard2_defconfig b/configs/Cubieboard2_defconfig index e88cce4..653ec9a 100644 --- a/configs/Cubieboard2_defconfig +++ b/configs/Cubieboard2_defconfig @@ -4,6 +4,14 @@ CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=480 CONFIG_MMC0_CD_PIN="PH1" CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubieboard2" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig index ce9591d..7786cac 100644 --- a/configs/Cubieboard_defconfig +++ b/configs/Cubieboard_defconfig @@ -3,5 +3,13 @@ CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=480 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-cubieboard" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig index c34ab50..1f6a8e3 100644 --- a/configs/Cubietruck_defconfig +++ b/configs/Cubietruck_defconfig @@ -5,6 +5,14 @@ CONFIG_DRAM_CLK=432 CONFIG_VIDEO_VGA=y CONFIG_GMAC_TX_DELAY=1 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubietruck" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/Et_q8_v1_6_defconfig b/configs/Et_q8_v1_6_defconfig index 4e8350f..5af232f 100644 --- a/configs/Et_q8_v1_6_defconfig +++ b/configs/Et_q8_v1_6_defconfig @@ -13,7 +13,13 @@ CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-et-q8-v1.6" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3000 diff --git a/configs/Hummingbird_A31_defconfig b/configs/Hummingbird_A31_defconfig index 015140f..2b02b2d 100644 --- a/configs/Hummingbird_A31_defconfig +++ b/configs/Hummingbird_A31_defconfig @@ -7,7 +7,15 @@ CONFIG_USB2_VBUS_PIN="" CONFIG_VIDEO_VGA_VIA_LCD=y CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25" CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-hummingbird" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_SERIAL=y CONFIG_AXP221_ALDO1_VOLT=3300 +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/Hyundai_A7HD_defconfig b/configs/Hyundai_A7HD_defconfig index e26f4f0..9302a06 100644 --- a/configs/Hyundai_A7HD_defconfig +++ b/configs/Hyundai_A7HD_defconfig @@ -14,5 +14,11 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_VIDEO_LCD_PANEL_LVDS=y CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-hyundai-a7hd" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y diff --git a/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig b/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig index 5b1080f..7861417 100644 --- a/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig +++ b/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig @@ -13,7 +13,13 @@ CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2-lcd1024x600" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3000 diff --git a/configs/Ippo_q8h_v1_2_defconfig b/configs/Ippo_q8h_v1_2_defconfig index 8d03300..3672ab9 100644 --- a/configs/Ippo_q8h_v1_2_defconfig +++ b/configs/Ippo_q8h_v1_2_defconfig @@ -13,7 +13,13 @@ CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v1.2" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3000 diff --git a/configs/Ippo_q8h_v5_defconfig b/configs/Ippo_q8h_v5_defconfig index 1a07064..2120709 100644 --- a/configs/Ippo_q8h_v5_defconfig +++ b/configs/Ippo_q8h_v5_defconfig @@ -13,7 +13,13 @@ CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v5" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3000 diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig b/configs/Linksprite_pcDuino3_Nano_defconfig index be381ef..08a7c63 100644 --- a/configs/Linksprite_pcDuino3_Nano_defconfig +++ b/configs/Linksprite_pcDuino3_Nano_defconfig @@ -6,6 +6,14 @@ CONFIG_DRAM_ZQ=122 CONFIG_USB1_VBUS_PIN="PH11" CONFIG_GMAC_TX_DELAY=3 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3-nano" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/Linksprite_pcDuino3_defconfig b/configs/Linksprite_pcDuino3_defconfig index 2c846f9..b548d1d 100644 --- a/configs/Linksprite_pcDuino3_defconfig +++ b/configs/Linksprite_pcDuino3_defconfig @@ -4,6 +4,14 @@ CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=480 CONFIG_DRAM_ZQ=122 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/Linksprite_pcDuino_defconfig b/configs/Linksprite_pcDuino_defconfig index aed5b59..caf874a 100644 --- a/configs/Linksprite_pcDuino_defconfig +++ b/configs/Linksprite_pcDuino_defconfig @@ -3,5 +3,13 @@ CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=408 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pcduino" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/M52277EVB_defconfig b/configs/M52277EVB_defconfig index a13cc8b..730a4b8 100644 --- a/configs/M52277EVB_defconfig +++ b/configs/M52277EVB_defconfig @@ -1,3 +1,4 @@ CONFIG_M68K=y CONFIG_TARGET_M52277EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_SPANSION_BOOT,SYS_TEXT_BASE=0x00000000" +CONFIG_SPI_FLASH=y diff --git a/configs/M52277EVB_stmicro_defconfig b/configs/M52277EVB_stmicro_defconfig index 65de4d5..41a4283 100644 --- a/configs/M52277EVB_stmicro_defconfig +++ b/configs/M52277EVB_stmicro_defconfig @@ -1,3 +1,4 @@ CONFIG_M68K=y CONFIG_TARGET_M52277EVB=y CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x43E00000" +CONFIG_SPI_FLASH=y diff --git a/configs/M54418TWR_defconfig b/configs/M54418TWR_defconfig index 4c8876f..d84eff7 100644 --- a/configs/M54418TWR_defconfig +++ b/configs/M54418TWR_defconfig @@ -2,3 +2,4 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/M54418TWR_nand_mii_defconfig b/configs/M54418TWR_nand_mii_defconfig index 07144d6..7f8fd55 100644 --- a/configs/M54418TWR_nand_mii_defconfig +++ b/configs/M54418TWR_nand_mii_defconfig @@ -2,3 +2,4 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=25000000" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/M54418TWR_nand_rmii_defconfig b/configs/M54418TWR_nand_rmii_defconfig index 70b6958..d7dea64 100644 --- a/configs/M54418TWR_nand_rmii_defconfig +++ b/configs/M54418TWR_nand_rmii_defconfig @@ -2,3 +2,4 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/M54418TWR_nand_rmii_lowfreq_defconfig b/configs/M54418TWR_nand_rmii_lowfreq_defconfig index 4482c41..4bf7439 100644 --- a/configs/M54418TWR_nand_rmii_lowfreq_defconfig +++ b/configs/M54418TWR_nand_rmii_lowfreq_defconfig @@ -2,3 +2,4 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,LOW_MCFCLK,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/M54418TWR_serial_mii_defconfig b/configs/M54418TWR_serial_mii_defconfig index 6fa566e..a1ceaf3 100644 --- a/configs/M54418TWR_serial_mii_defconfig +++ b/configs/M54418TWR_serial_mii_defconfig @@ -2,3 +2,4 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=25000000" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/M54418TWR_serial_rmii_defconfig b/configs/M54418TWR_serial_rmii_defconfig index 4c8876f..d84eff7 100644 --- a/configs/M54418TWR_serial_rmii_defconfig +++ b/configs/M54418TWR_serial_rmii_defconfig @@ -2,3 +2,4 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/M54451EVB_defconfig b/configs/M54451EVB_defconfig index b7f4803..2f3d77a 100644 --- a/configs/M54451EVB_defconfig +++ b/configs/M54451EVB_defconfig @@ -2,3 +2,4 @@ CONFIG_M68K=y CONFIG_TARGET_M54451EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=24000000" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/M54451EVB_stmicro_defconfig b/configs/M54451EVB_stmicro_defconfig index 01e420e..32f17e0 100644 --- a/configs/M54451EVB_stmicro_defconfig +++ b/configs/M54451EVB_stmicro_defconfig @@ -2,3 +2,4 @@ CONFIG_M68K=y CONFIG_TARGET_M54451EVB=y CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x47e00000,SYS_INPUT_CLKSRC=24000000" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/M54455EVB_a66_defconfig b/configs/M54455EVB_a66_defconfig index 95a00b8..549d8bf 100644 --- a/configs/M54455EVB_a66_defconfig +++ b/configs/M54455EVB_a66_defconfig @@ -2,3 +2,4 @@ CONFIG_M68K=y CONFIG_TARGET_M54455EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=66666666" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/M54455EVB_defconfig b/configs/M54455EVB_defconfig index 99df654..a63da60 100644 --- a/configs/M54455EVB_defconfig +++ b/configs/M54455EVB_defconfig @@ -2,3 +2,4 @@ CONFIG_M68K=y CONFIG_TARGET_M54455EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=33333333" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/M54455EVB_i66_defconfig b/configs/M54455EVB_i66_defconfig index b633a55..86c39ea 100644 --- a/configs/M54455EVB_i66_defconfig +++ b/configs/M54455EVB_i66_defconfig @@ -2,3 +2,4 @@ CONFIG_M68K=y CONFIG_TARGET_M54455EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_INTEL_BOOT,SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=66666666" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/M54455EVB_intel_defconfig b/configs/M54455EVB_intel_defconfig index 6cf0006..593ddc1 100644 --- a/configs/M54455EVB_intel_defconfig +++ b/configs/M54455EVB_intel_defconfig @@ -2,3 +2,4 @@ CONFIG_M68K=y CONFIG_TARGET_M54455EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_INTEL_BOOT,SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=33333333" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/M54455EVB_stm33_defconfig b/configs/M54455EVB_stm33_defconfig index c68c386..5efb472 100644 --- a/configs/M54455EVB_stm33_defconfig +++ b/configs/M54455EVB_stm33_defconfig @@ -2,3 +2,4 @@ CONFIG_M68K=y CONFIG_TARGET_M54455EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_STMICRO_BOOT,CF_SBF,SYS_TEXT_BASE=0x4FE00000,SYS_INPUT_CLKSRC=33333333" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/MK808C_defconfig b/configs/MK808C_defconfig index 88df54c..f0ee148 100644 --- a/configs/MK808C_defconfig +++ b/configs/MK808C_defconfig @@ -3,5 +3,13 @@ CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-mk808c" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/MPC8536DS_36BIT_defconfig b/configs/MPC8536DS_36BIT_defconfig index 328791b..c32ae96 100644 --- a/configs/MPC8536DS_36BIT_defconfig +++ b/configs/MPC8536DS_36BIT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_MPC8536DS=y CONFIG_SYS_EXTRA_OPTIONS="36BIT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/MPC8536DS_SDCARD_defconfig b/configs/MPC8536DS_SDCARD_defconfig index 715ba0c..9c45cee 100644 --- a/configs/MPC8536DS_SDCARD_defconfig +++ b/configs/MPC8536DS_SDCARD_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_MPC8536DS=y CONFIG_SYS_EXTRA_OPTIONS="SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/MPC8536DS_SPIFLASH_defconfig b/configs/MPC8536DS_SPIFLASH_defconfig index 3bd282f..98d62ac 100644 --- a/configs/MPC8536DS_SPIFLASH_defconfig +++ b/configs/MPC8536DS_SPIFLASH_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_MPC8536DS=y CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/MPC8536DS_defconfig b/configs/MPC8536DS_defconfig index 2aa6823..bc43218 100644 --- a/configs/MPC8536DS_defconfig +++ b/configs/MPC8536DS_defconfig @@ -3,3 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_MPC8536DS=y CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/MSI_Primo73_defconfig b/configs/MSI_Primo73_defconfig index 00f0796..6db1115 100644 --- a/configs/MSI_Primo73_defconfig +++ b/configs/MSI_Primo73_defconfig @@ -9,5 +9,13 @@ CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" # CONFIG_USB_KEYBOARD is not set CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-primo73" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig index e6888a1..5c633c7 100644 --- a/configs/MSI_Primo81_defconfig +++ b/configs/MSI_Primo81_defconfig @@ -3,13 +3,23 @@ CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN6I=y CONFIG_DRAM_CLK=360 CONFIG_DRAM_ZQ=122 +CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" +CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" +CONFIG_AXP_GPIO=y CONFIG_VIDEO_LCD_MODE="x:768,y:1024,depth:18,pclk_khz:66000,le:56,ri:60,up:30,lo:36,hs:64,vs:50,sync:3,vmode:0" CONFIG_VIDEO_LCD_BL_EN="PA25" CONFIG_VIDEO_LCD_BL_PWM="PH13" CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828=y +CONFIG_USB_MUSB_SUNXI=y # CONFIG_USB_KEYBOARD is not set CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-primo81" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_VIDEO_LCD_SSD2828_TX_CLK=27 CONFIG_VIDEO_LCD_SSD2828_RESET="PA26" @@ -17,7 +27,4 @@ CONFIG_VIDEO_LCD_SPI_CS="PH9" CONFIG_VIDEO_LCD_SPI_SCLK="PH10" CONFIG_VIDEO_LCD_SPI_MOSI="PH11" CONFIG_VIDEO_LCD_SPI_MISO="PH12" -CONFIG_AXP_GPIO=y -CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" -CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" -CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB=y diff --git a/configs/Marsboard_A10_defconfig b/configs/Marsboard_A10_defconfig index 5a9703d..01758e4 100644 --- a/configs/Marsboard_A10_defconfig +++ b/configs/Marsboard_A10_defconfig @@ -2,5 +2,13 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN4I=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-marsboard" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/Mele_A1000G_quad_defconfig b/configs/Mele_A1000G_quad_defconfig index 3a746c8..f55b706 100644 --- a/configs/Mele_A1000G_quad_defconfig +++ b/configs/Mele_A1000G_quad_defconfig @@ -1,13 +1,3 @@ -# The Mele A1000G quad is yet another Allwinnner based Android top set box -# from Mele. -# -# It uses the same case as the original Mele A1000 and the same PCB as the M9, -# the USM sata storage slot is connected via anusb to sata bridge connected to -# the otg controller, this renders the micro USB B receptacle non functional. -# -# It features an A31 SoC, 2G RAM, 16G Nand, 100Mbit ethernet, HDMI out, -# 3 USB A receptacles, 3.5 mm jack for analog audio out, optical spdif, -# RTL R8188EU (USB) wifi and a full size sdcard slot CONFIG_ARM=y CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN6I=y @@ -15,10 +5,18 @@ CONFIG_DRAM_ZQ=120 CONFIG_USB1_VBUS_PIN="PC27" CONFIG_USB2_VBUS_PIN="" CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mele-a1000g-quad" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_SERIAL=y CONFIG_AXP221_DCDC1_VOLT=3300 CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_DLDO4_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3300 +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig index 6678e4c..aad71fc 100644 --- a/configs/Mele_A1000_defconfig +++ b/configs/Mele_A1000_defconfig @@ -3,5 +3,13 @@ CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN4I=y CONFIG_VIDEO_VGA=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-a1000" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/Mele_I7_defconfig b/configs/Mele_I7_defconfig index bf67433..f96ee14 100644 --- a/configs/Mele_I7_defconfig +++ b/configs/Mele_I7_defconfig @@ -5,10 +5,18 @@ CONFIG_DRAM_ZQ=120 CONFIG_USB1_VBUS_PIN="PC27" CONFIG_USB2_VBUS_PIN="" CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-i7" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_SERIAL=y CONFIG_AXP221_DCDC1_VOLT=3300 CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_DLDO4_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3300 +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/Mele_M3_defconfig b/configs/Mele_M3_defconfig index 9c2eb86..e2869a3 100644 --- a/configs/Mele_M3_defconfig +++ b/configs/Mele_M3_defconfig @@ -6,6 +6,14 @@ CONFIG_MMC0_CD_PIN="PH1" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_VIDEO_VGA=y CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m3" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/Mele_M5_defconfig b/configs/Mele_M5_defconfig index 5ee648b..aad12a1 100644 --- a/configs/Mele_M5_defconfig +++ b/configs/Mele_M5_defconfig @@ -5,6 +5,14 @@ CONFIG_DRAM_CLK=432 CONFIG_DRAM_ZQ=122 CONFIG_MMC0_CD_PIN="PH1" CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m5" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,USB_EHCI,STATUSLED=234" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/Mele_M9_defconfig b/configs/Mele_M9_defconfig index 16881fa..c3242b8 100644 --- a/configs/Mele_M9_defconfig +++ b/configs/Mele_M9_defconfig @@ -1,13 +1,3 @@ -# The Mele M9 is yet another Allwinnner based Android top set box from Mele. -# -# It uses the same PCB as the A1000G quad, but in a new case without a -# USM sata storage slot, and the space on the PCB for the usb to sata -# bridge connected to the otg controller is not populated, possible -# making the micro usb otg connector functional (untested) -# -# It features an A31 SoC, 2G RAM, 16G Nand, 100Mbit ethernet, HDMI out, -# 3 USB A receptacles, 3.5 mm jack for analog audio out, optical spdif, -# micro USB B receptacle, RTL R8188EU (USB) and a full size sdcard slot CONFIG_ARM=y CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN6I=y @@ -15,10 +5,18 @@ CONFIG_DRAM_ZQ=120 CONFIG_USB1_VBUS_PIN="PC27" CONFIG_USB2_VBUS_PIN="" CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-m9" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_SERIAL=y CONFIG_AXP221_DCDC1_VOLT=3300 CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_DLDO4_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3300 +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/Merrii_A80_Optimus_defconfig b/configs/Merrii_A80_Optimus_defconfig index 6bd5273..4a0dce7 100644 --- a/configs/Merrii_A80_Optimus_defconfig +++ b/configs/Merrii_A80_Optimus_defconfig @@ -1,11 +1,18 @@ -CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-optimus" -CONFIG_VIDEO=n -CONFIG_USB_KEYBOARD=n -CONFIG_MMC0_CD_PIN="PH18" CONFIG_ARM=y CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN9I=y -# these are unused atm but we must set them to something CONFIG_DRAM_CLK=360 CONFIG_DRAM_ZQ=123 CONFIG_SYS_CLK_FREQ=1008000000 +CONFIG_MMC0_CD_PIN="PH18" +# CONFIG_VIDEO is not set +# CONFIG_USB_KEYBOARD is not set +CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-optimus" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/MigoR_defconfig b/configs/MigoR_defconfig index d4953ce..e6a9660 100644 --- a/configs/MigoR_defconfig +++ b/configs/MigoR_defconfig @@ -1,3 +1,4 @@ CONFIG_SH=y CONFIG_TARGET_MIGOR=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig index 918b639..4ec752b 100644 --- a/configs/Mini-X_defconfig +++ b/configs/Mini-X_defconfig @@ -2,5 +2,13 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN4I=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mini-xplus" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/O2DNT2_RAMBOOT_defconfig b/configs/O2DNT2_RAMBOOT_defconfig index 0e47ffe..40e238a 100644 --- a/configs/O2DNT2_RAMBOOT_defconfig +++ b/configs/O2DNT2_RAMBOOT_defconfig @@ -1,8 +1,8 @@ CONFIG_PPC=y -CONFIG_CMD_NET=y CONFIG_MPC5xxx=y CONFIG_TARGET_O2DNT2=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x00100000" CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press password to stop\n" CONFIG_AUTOBOOT_STOP_STR="++++++++++" +CONFIG_CMD_NET=y diff --git a/configs/O2DNT2_defconfig b/configs/O2DNT2_defconfig index 3501761..6bd3cee 100644 --- a/configs/O2DNT2_defconfig +++ b/configs/O2DNT2_defconfig @@ -1,7 +1,7 @@ CONFIG_PPC=y -CONFIG_CMD_NET=y CONFIG_MPC5xxx=y CONFIG_TARGET_O2DNT2=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press password to stop\n" CONFIG_AUTOBOOT_STOP_STR="++++++++++" +CONFIG_CMD_NET=y diff --git a/configs/Orangepi_defconfig b/configs/Orangepi_defconfig index 9d5e5dc..23b5761 100644 --- a/configs/Orangepi_defconfig +++ b/configs/Orangepi_defconfig @@ -7,6 +7,14 @@ CONFIG_USB2_VBUS_PIN="PH22" CONFIG_VIDEO_VGA=y CONFIG_GMAC_TX_DELAY=3 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/Orangepi_mini_defconfig b/configs/Orangepi_mini_defconfig index 99cc600..99bb94e 100644 --- a/configs/Orangepi_mini_defconfig +++ b/configs/Orangepi_mini_defconfig @@ -9,6 +9,14 @@ CONFIG_USB1_VBUS_PIN="PH26" CONFIG_USB2_VBUS_PIN="PH22" CONFIG_GMAC_TX_DELAY=3 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi-mini" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig b/configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig index b5e4a91..6530f07 100644 --- a/configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig +++ b/configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,36BIT,NAND_SECBOOT,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PA_36BIT_NAND_defconfig b/configs/P1010RDB-PA_36BIT_NAND_defconfig index fe95616..ffb3469 100644 --- a/configs/P1010RDB-PA_36BIT_NAND_defconfig +++ b/configs/P1010RDB-PA_36BIT_NAND_defconfig @@ -6,3 +6,4 @@ CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,36BIT,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PA_36BIT_NOR_SECBOOT_defconfig b/configs/P1010RDB-PA_36BIT_NOR_SECBOOT_defconfig index f96db97..f8c8c5d 100644 --- a/configs/P1010RDB-PA_36BIT_NOR_SECBOOT_defconfig +++ b/configs/P1010RDB-PA_36BIT_NOR_SECBOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,36BIT,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PA_36BIT_NOR_defconfig b/configs/P1010RDB-PA_36BIT_NOR_defconfig index 2e7d281..6c066aa 100644 --- a/configs/P1010RDB-PA_36BIT_NOR_defconfig +++ b/configs/P1010RDB-PA_36BIT_NOR_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,36BIT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PA_36BIT_SDCARD_defconfig b/configs/P1010RDB-PA_36BIT_SDCARD_defconfig index ec52886..c0fa356 100644 --- a/configs/P1010RDB-PA_36BIT_SDCARD_defconfig +++ b/configs/P1010RDB-PA_36BIT_SDCARD_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,36BIT,SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PA_36BIT_SPIFLASH_SECBOOT_defconfig b/configs/P1010RDB-PA_36BIT_SPIFLASH_SECBOOT_defconfig index 1b93479..5cd85f9 100644 --- a/configs/P1010RDB-PA_36BIT_SPIFLASH_SECBOOT_defconfig +++ b/configs/P1010RDB-PA_36BIT_SPIFLASH_SECBOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,36BIT,SPIFLASH,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig b/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig index 7f8b5dd..d550a6b 100644 --- a/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig +++ b/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,36BIT,SPIFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PA_NAND_SECBOOT_defconfig b/configs/P1010RDB-PA_NAND_SECBOOT_defconfig index 5888af2..004fe69 100644 --- a/configs/P1010RDB-PA_NAND_SECBOOT_defconfig +++ b/configs/P1010RDB-PA_NAND_SECBOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,NAND_SECBOOT,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PA_NAND_defconfig b/configs/P1010RDB-PA_NAND_defconfig index e6bd968..16fad87 100644 --- a/configs/P1010RDB-PA_NAND_defconfig +++ b/configs/P1010RDB-PA_NAND_defconfig @@ -6,3 +6,4 @@ CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PA_NOR_SECBOOT_defconfig b/configs/P1010RDB-PA_NOR_SECBOOT_defconfig index 8a33351..e681bc3 100644 --- a/configs/P1010RDB-PA_NOR_SECBOOT_defconfig +++ b/configs/P1010RDB-PA_NOR_SECBOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PA_NOR_defconfig b/configs/P1010RDB-PA_NOR_defconfig index f7fb973..d899655 100644 --- a/configs/P1010RDB-PA_NOR_defconfig +++ b/configs/P1010RDB-PA_NOR_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PA_SDCARD_defconfig b/configs/P1010RDB-PA_SDCARD_defconfig index 4f3891f..2b52397 100644 --- a/configs/P1010RDB-PA_SDCARD_defconfig +++ b/configs/P1010RDB-PA_SDCARD_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PA_SPIFLASH_SECBOOT_defconfig b/configs/P1010RDB-PA_SPIFLASH_SECBOOT_defconfig index bede3bd..5756bb2 100644 --- a/configs/P1010RDB-PA_SPIFLASH_SECBOOT_defconfig +++ b/configs/P1010RDB-PA_SPIFLASH_SECBOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,SPIFLASH,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PA_SPIFLASH_defconfig b/configs/P1010RDB-PA_SPIFLASH_defconfig index 97e7382..124ec69 100644 --- a/configs/P1010RDB-PA_SPIFLASH_defconfig +++ b/configs/P1010RDB-PA_SPIFLASH_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,SPIFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_36BIT_NAND_SECBOOT_defconfig b/configs/P1010RDB-PB_36BIT_NAND_SECBOOT_defconfig index 6a781c2..bd2a690 100644 --- a/configs/P1010RDB-PB_36BIT_NAND_SECBOOT_defconfig +++ b/configs/P1010RDB-PB_36BIT_NAND_SECBOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,36BIT,NAND_SECBOOT,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_36BIT_NAND_defconfig b/configs/P1010RDB-PB_36BIT_NAND_defconfig index ea3456b..2fca071 100644 --- a/configs/P1010RDB-PB_36BIT_NAND_defconfig +++ b/configs/P1010RDB-PB_36BIT_NAND_defconfig @@ -6,3 +6,4 @@ CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,36BIT,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_36BIT_NOR_SECBOOT_defconfig b/configs/P1010RDB-PB_36BIT_NOR_SECBOOT_defconfig index 09dafed..0151fbe 100644 --- a/configs/P1010RDB-PB_36BIT_NOR_SECBOOT_defconfig +++ b/configs/P1010RDB-PB_36BIT_NOR_SECBOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,36BIT,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_36BIT_NOR_defconfig b/configs/P1010RDB-PB_36BIT_NOR_defconfig index f7243ac..561f036 100644 --- a/configs/P1010RDB-PB_36BIT_NOR_defconfig +++ b/configs/P1010RDB-PB_36BIT_NOR_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,36BIT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_36BIT_SDCARD_defconfig b/configs/P1010RDB-PB_36BIT_SDCARD_defconfig index a9ea8b2..44c5c27 100644 --- a/configs/P1010RDB-PB_36BIT_SDCARD_defconfig +++ b/configs/P1010RDB-PB_36BIT_SDCARD_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,36BIT,SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_36BIT_SPIFLASH_SECBOOT_defconfig b/configs/P1010RDB-PB_36BIT_SPIFLASH_SECBOOT_defconfig index 067f9ba..d3f6a35 100644 --- a/configs/P1010RDB-PB_36BIT_SPIFLASH_SECBOOT_defconfig +++ b/configs/P1010RDB-PB_36BIT_SPIFLASH_SECBOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,36BIT,SPIFLASH,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig b/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig index 8fed202..4cbda7e 100644 --- a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig +++ b/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,36BIT,SPIFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_NAND_SECBOOT_defconfig b/configs/P1010RDB-PB_NAND_SECBOOT_defconfig index 97c4673..3c30ea0 100644 --- a/configs/P1010RDB-PB_NAND_SECBOOT_defconfig +++ b/configs/P1010RDB-PB_NAND_SECBOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,NAND_SECBOOT,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_NAND_defconfig b/configs/P1010RDB-PB_NAND_defconfig index 3e49a24..9219373 100644 --- a/configs/P1010RDB-PB_NAND_defconfig +++ b/configs/P1010RDB-PB_NAND_defconfig @@ -6,3 +6,4 @@ CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_NOR_SECBOOT_defconfig b/configs/P1010RDB-PB_NOR_SECBOOT_defconfig index fe5ee48..277158b 100644 --- a/configs/P1010RDB-PB_NOR_SECBOOT_defconfig +++ b/configs/P1010RDB-PB_NOR_SECBOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_NOR_defconfig b/configs/P1010RDB-PB_NOR_defconfig index 77a1a63..0361140 100644 --- a/configs/P1010RDB-PB_NOR_defconfig +++ b/configs/P1010RDB-PB_NOR_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_SDCARD_defconfig b/configs/P1010RDB-PB_SDCARD_defconfig index 27777bc..2566f87 100644 --- a/configs/P1010RDB-PB_SDCARD_defconfig +++ b/configs/P1010RDB-PB_SDCARD_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_SPIFLASH_SECBOOT_defconfig b/configs/P1010RDB-PB_SPIFLASH_SECBOOT_defconfig index 568934a..43c4433 100644 --- a/configs/P1010RDB-PB_SPIFLASH_SECBOOT_defconfig +++ b/configs/P1010RDB-PB_SPIFLASH_SECBOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,SPIFLASH,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_SPIFLASH_defconfig b/configs/P1010RDB-PB_SPIFLASH_defconfig index 835f3ca..37f135c 100644 --- a/configs/P1010RDB-PB_SPIFLASH_defconfig +++ b/configs/P1010RDB-PB_SPIFLASH_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,SPIFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1020RDB-PC_36BIT_NAND_defconfig b/configs/P1020RDB-PC_36BIT_NAND_defconfig index 346a702..b112f55 100644 --- a/configs/P1020RDB-PC_36BIT_NAND_defconfig +++ b/configs/P1020RDB-PC_36BIT_NAND_defconfig @@ -6,3 +6,4 @@ CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,36BIT,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1020RDB-PC_36BIT_SDCARD_defconfig b/configs/P1020RDB-PC_36BIT_SDCARD_defconfig index 168c4c8..d98d923 100644 --- a/configs/P1020RDB-PC_36BIT_SDCARD_defconfig +++ b/configs/P1020RDB-PC_36BIT_SDCARD_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,36BIT,SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig b/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig index 8b19d32..49b7ab8 100644 --- a/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig +++ b/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,36BIT,SPIFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1020RDB-PC_36BIT_defconfig b/configs/P1020RDB-PC_36BIT_defconfig index 8aa547f..ea8a042 100644 --- a/configs/P1020RDB-PC_36BIT_defconfig +++ b/configs/P1020RDB-PC_36BIT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,36BIT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1020RDB-PC_NAND_defconfig b/configs/P1020RDB-PC_NAND_defconfig index 6149840..26742ff 100644 --- a/configs/P1020RDB-PC_NAND_defconfig +++ b/configs/P1020RDB-PC_NAND_defconfig @@ -6,3 +6,4 @@ CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1020RDB-PC_SDCARD_defconfig b/configs/P1020RDB-PC_SDCARD_defconfig index 00fa45e..4df5c2b 100644 --- a/configs/P1020RDB-PC_SDCARD_defconfig +++ b/configs/P1020RDB-PC_SDCARD_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1020RDB-PC_SPIFLASH_defconfig b/configs/P1020RDB-PC_SPIFLASH_defconfig index 1f9c90f..cb132a8 100644 --- a/configs/P1020RDB-PC_SPIFLASH_defconfig +++ b/configs/P1020RDB-PC_SPIFLASH_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,SPIFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1020RDB-PC_defconfig b/configs/P1020RDB-PC_defconfig index 9c273d6..6675468 100644 --- a/configs/P1020RDB-PC_defconfig +++ b/configs/P1020RDB-PC_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1020RDB-PD_NAND_defconfig b/configs/P1020RDB-PD_NAND_defconfig index 3cfa7c7..955290b 100644 --- a/configs/P1020RDB-PD_NAND_defconfig +++ b/configs/P1020RDB-PD_NAND_defconfig @@ -6,3 +6,4 @@ CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PD,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1020RDB-PD_SDCARD_defconfig b/configs/P1020RDB-PD_SDCARD_defconfig index 4d7d8a6..13a85ec 100644 --- a/configs/P1020RDB-PD_SDCARD_defconfig +++ b/configs/P1020RDB-PD_SDCARD_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PD,SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1020RDB-PD_SPIFLASH_defconfig b/configs/P1020RDB-PD_SPIFLASH_defconfig index d0625ee..aaadab9 100644 --- a/configs/P1020RDB-PD_SPIFLASH_defconfig +++ b/configs/P1020RDB-PD_SPIFLASH_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PD,SPIFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1020RDB-PD_defconfig b/configs/P1020RDB-PD_defconfig index 6847d23..e2a9f7d 100644 --- a/configs/P1020RDB-PD_defconfig +++ b/configs/P1020RDB-PD_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1021RDB-PC_36BIT_NAND_defconfig b/configs/P1021RDB-PC_36BIT_NAND_defconfig index c04b980..35dd6e0 100644 --- a/configs/P1021RDB-PC_36BIT_NAND_defconfig +++ b/configs/P1021RDB-PC_36BIT_NAND_defconfig @@ -6,3 +6,4 @@ CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,36BIT,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1021RDB-PC_36BIT_SDCARD_defconfig b/configs/P1021RDB-PC_36BIT_SDCARD_defconfig index d0d4d3e..702a2fd 100644 --- a/configs/P1021RDB-PC_36BIT_SDCARD_defconfig +++ b/configs/P1021RDB-PC_36BIT_SDCARD_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,36BIT,SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig b/configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig index 35ea741..4150b29 100644 --- a/configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig +++ b/configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,36BIT,SPIFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1021RDB-PC_36BIT_defconfig b/configs/P1021RDB-PC_36BIT_defconfig index 69faff9..8622a42 100644 --- a/configs/P1021RDB-PC_36BIT_defconfig +++ b/configs/P1021RDB-PC_36BIT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,36BIT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1021RDB-PC_NAND_defconfig b/configs/P1021RDB-PC_NAND_defconfig index f486926..61bf58d 100644 --- a/configs/P1021RDB-PC_NAND_defconfig +++ b/configs/P1021RDB-PC_NAND_defconfig @@ -6,3 +6,4 @@ CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1021RDB-PC_SDCARD_defconfig b/configs/P1021RDB-PC_SDCARD_defconfig index 4ab2f67..e9c597b 100644 --- a/configs/P1021RDB-PC_SDCARD_defconfig +++ b/configs/P1021RDB-PC_SDCARD_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1021RDB-PC_SPIFLASH_defconfig b/configs/P1021RDB-PC_SPIFLASH_defconfig index e3790e0..1fb2085 100644 --- a/configs/P1021RDB-PC_SPIFLASH_defconfig +++ b/configs/P1021RDB-PC_SPIFLASH_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,SPIFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1021RDB-PC_defconfig b/configs/P1021RDB-PC_defconfig index 6e9e829..83326ce 100644 --- a/configs/P1021RDB-PC_defconfig +++ b/configs/P1021RDB-PC_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SYS_EXTRA_OPTIONS="P1021RDB" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1022DS_36BIT_NAND_defconfig b/configs/P1022DS_36BIT_NAND_defconfig index 02c7a0a..8e763fa 100644 --- a/configs/P1022DS_36BIT_NAND_defconfig +++ b/configs/P1022DS_36BIT_NAND_defconfig @@ -6,3 +6,4 @@ CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="36BIT,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1022DS_36BIT_SDCARD_defconfig b/configs/P1022DS_36BIT_SDCARD_defconfig index f0a065e..d6b9f09 100644 --- a/configs/P1022DS_36BIT_SDCARD_defconfig +++ b/configs/P1022DS_36BIT_SDCARD_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="36BIT,SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1022DS_36BIT_SPIFLASH_defconfig b/configs/P1022DS_36BIT_SPIFLASH_defconfig index 9c0862f..b3966ee 100644 --- a/configs/P1022DS_36BIT_SPIFLASH_defconfig +++ b/configs/P1022DS_36BIT_SPIFLASH_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="36BIT,SPIFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1022DS_36BIT_defconfig b/configs/P1022DS_36BIT_defconfig index 037659f..cc7877b 100644 --- a/configs/P1022DS_36BIT_defconfig +++ b/configs/P1022DS_36BIT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1022DS=y CONFIG_SYS_EXTRA_OPTIONS="36BIT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1022DS_NAND_defconfig b/configs/P1022DS_NAND_defconfig index 0008c52..253b19a 100644 --- a/configs/P1022DS_NAND_defconfig +++ b/configs/P1022DS_NAND_defconfig @@ -6,3 +6,4 @@ CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1022DS_SDCARD_defconfig b/configs/P1022DS_SDCARD_defconfig index 8efdd90..a959631 100644 --- a/configs/P1022DS_SDCARD_defconfig +++ b/configs/P1022DS_SDCARD_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1022DS_SPIFLASH_defconfig b/configs/P1022DS_SPIFLASH_defconfig index db2c3ab..79eba57 100644 --- a/configs/P1022DS_SPIFLASH_defconfig +++ b/configs/P1022DS_SPIFLASH_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1022DS_defconfig b/configs/P1022DS_defconfig index 6cf36de..0252307 100644 --- a/configs/P1022DS_defconfig +++ b/configs/P1022DS_defconfig @@ -3,3 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1024RDB_36BIT_defconfig b/configs/P1024RDB_36BIT_defconfig index 78066a6..fded3af 100644 --- a/configs/P1024RDB_36BIT_defconfig +++ b/configs/P1024RDB_36BIT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SYS_EXTRA_OPTIONS="P1024RDB,36BIT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1024RDB_NAND_defconfig b/configs/P1024RDB_NAND_defconfig index 498f091..e12b198 100644 --- a/configs/P1024RDB_NAND_defconfig +++ b/configs/P1024RDB_NAND_defconfig @@ -6,3 +6,4 @@ CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="P1024RDB,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1024RDB_SDCARD_defconfig b/configs/P1024RDB_SDCARD_defconfig index 3960c40..55283d6 100644 --- a/configs/P1024RDB_SDCARD_defconfig +++ b/configs/P1024RDB_SDCARD_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1024RDB,SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1024RDB_SPIFLASH_defconfig b/configs/P1024RDB_SPIFLASH_defconfig index 7ee6054..438aa36 100644 --- a/configs/P1024RDB_SPIFLASH_defconfig +++ b/configs/P1024RDB_SPIFLASH_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1024RDB,SPIFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1024RDB_defconfig b/configs/P1024RDB_defconfig index 883a562..a7cc6ef 100644 --- a/configs/P1024RDB_defconfig +++ b/configs/P1024RDB_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SYS_EXTRA_OPTIONS="P1024RDB" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1025RDB_36BIT_defconfig b/configs/P1025RDB_36BIT_defconfig index 56d46fa..90abbfe 100644 --- a/configs/P1025RDB_36BIT_defconfig +++ b/configs/P1025RDB_36BIT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SYS_EXTRA_OPTIONS="P1025RDB,36BIT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1025RDB_NAND_defconfig b/configs/P1025RDB_NAND_defconfig index 7d5d4b9..b7cfe0c 100644 --- a/configs/P1025RDB_NAND_defconfig +++ b/configs/P1025RDB_NAND_defconfig @@ -6,3 +6,4 @@ CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="P1025RDB,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1025RDB_SDCARD_defconfig b/configs/P1025RDB_SDCARD_defconfig index 6efa5a3..9d76178 100644 --- a/configs/P1025RDB_SDCARD_defconfig +++ b/configs/P1025RDB_SDCARD_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1025RDB,SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1025RDB_SPIFLASH_defconfig b/configs/P1025RDB_SPIFLASH_defconfig index efcaed8..a0b7b2d 100644 --- a/configs/P1025RDB_SPIFLASH_defconfig +++ b/configs/P1025RDB_SPIFLASH_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1025RDB,SPIFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P1025RDB_defconfig b/configs/P1025RDB_defconfig index 93c48db..9f07753 100644 --- a/configs/P1025RDB_defconfig +++ b/configs/P1025RDB_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SYS_EXTRA_OPTIONS="P1025RDB" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P2020RDB-PC_36BIT_NAND_defconfig b/configs/P2020RDB-PC_36BIT_NAND_defconfig index c283105..54e291c 100644 --- a/configs/P2020RDB-PC_36BIT_NAND_defconfig +++ b/configs/P2020RDB-PC_36BIT_NAND_defconfig @@ -6,3 +6,4 @@ CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,36BIT,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P2020RDB-PC_36BIT_SDCARD_defconfig b/configs/P2020RDB-PC_36BIT_SDCARD_defconfig index 96d8a86..e10a36e 100644 --- a/configs/P2020RDB-PC_36BIT_SDCARD_defconfig +++ b/configs/P2020RDB-PC_36BIT_SDCARD_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,36BIT,SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig b/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig index 501547f..44a1ca1 100644 --- a/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig +++ b/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,36BIT,SPIFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P2020RDB-PC_36BIT_defconfig b/configs/P2020RDB-PC_36BIT_defconfig index 7ac1ea1..a1e23f7 100644 --- a/configs/P2020RDB-PC_36BIT_defconfig +++ b/configs/P2020RDB-PC_36BIT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,36BIT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P2020RDB-PC_NAND_defconfig b/configs/P2020RDB-PC_NAND_defconfig index 8dfdc13..1239d97 100644 --- a/configs/P2020RDB-PC_NAND_defconfig +++ b/configs/P2020RDB-PC_NAND_defconfig @@ -6,3 +6,4 @@ CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P2020RDB-PC_SDCARD_defconfig b/configs/P2020RDB-PC_SDCARD_defconfig index c21b2be..d032c8a 100644 --- a/configs/P2020RDB-PC_SDCARD_defconfig +++ b/configs/P2020RDB-PC_SDCARD_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P2020RDB-PC_SPIFLASH_defconfig b/configs/P2020RDB-PC_SPIFLASH_defconfig index 66c5aa8..f3d1b80 100644 --- a/configs/P2020RDB-PC_SPIFLASH_defconfig +++ b/configs/P2020RDB-PC_SPIFLASH_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,SPIFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P2020RDB-PC_defconfig b/configs/P2020RDB-PC_defconfig index 53696e1..957dbb5 100644 --- a/configs/P2020RDB-PC_defconfig +++ b/configs/P2020RDB-PC_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SYS_EXTRA_OPTIONS="P2020RDB" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P2041RDB_NAND_defconfig b/configs/P2041RDB_NAND_defconfig index 3405f82..6bab740 100644 --- a/configs/P2041RDB_NAND_defconfig +++ b/configs/P2041RDB_NAND_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P2041RDB=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P2041RDB_SDCARD_defconfig b/configs/P2041RDB_SDCARD_defconfig index bd4502a..13b144a 100644 --- a/configs/P2041RDB_SDCARD_defconfig +++ b/configs/P2041RDB_SDCARD_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P2041RDB=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P2041RDB_SECURE_BOOT_defconfig b/configs/P2041RDB_SECURE_BOOT_defconfig index ed832ef..306ddad 100644 --- a/configs/P2041RDB_SECURE_BOOT_defconfig +++ b/configs/P2041RDB_SECURE_BOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P2041RDB=y CONFIG_SYS_EXTRA_OPTIONS="SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P2041RDB_SPIFLASH_defconfig b/configs/P2041RDB_SPIFLASH_defconfig index 5e97cb5..8aba3e2 100644 --- a/configs/P2041RDB_SPIFLASH_defconfig +++ b/configs/P2041RDB_SPIFLASH_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P2041RDB=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P2041RDB_SRIO_PCIE_BOOT_defconfig b/configs/P2041RDB_SRIO_PCIE_BOOT_defconfig index 9ac10a0..68a406f 100644 --- a/configs/P2041RDB_SRIO_PCIE_BOOT_defconfig +++ b/configs/P2041RDB_SRIO_PCIE_BOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P2041RDB=y CONFIG_SYS_EXTRA_OPTIONS="SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P2041RDB_defconfig b/configs/P2041RDB_defconfig index 3b358c9..8f0b1d4 100644 --- a/configs/P2041RDB_defconfig +++ b/configs/P2041RDB_defconfig @@ -3,3 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P2041RDB=y CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P3041DS_NAND_defconfig b/configs/P3041DS_NAND_defconfig index 5f53ea1..95eea20 100644 --- a/configs/P3041DS_NAND_defconfig +++ b/configs/P3041DS_NAND_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P3041DS=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P3041DS_SDCARD_defconfig b/configs/P3041DS_SDCARD_defconfig index 595306e..7eb7fa7 100644 --- a/configs/P3041DS_SDCARD_defconfig +++ b/configs/P3041DS_SDCARD_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P3041DS=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P3041DS_SECURE_BOOT_defconfig b/configs/P3041DS_SECURE_BOOT_defconfig index a1f5c14..d069b5b 100644 --- a/configs/P3041DS_SECURE_BOOT_defconfig +++ b/configs/P3041DS_SECURE_BOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P3041DS=y CONFIG_SYS_EXTRA_OPTIONS="SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P3041DS_SPIFLASH_defconfig b/configs/P3041DS_SPIFLASH_defconfig index d4b0fd9..ca99160 100644 --- a/configs/P3041DS_SPIFLASH_defconfig +++ b/configs/P3041DS_SPIFLASH_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P3041DS=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P3041DS_SRIO_PCIE_BOOT_defconfig b/configs/P3041DS_SRIO_PCIE_BOOT_defconfig index eadcb04..6d8cec8 100644 --- a/configs/P3041DS_SRIO_PCIE_BOOT_defconfig +++ b/configs/P3041DS_SRIO_PCIE_BOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P3041DS=y CONFIG_SYS_EXTRA_OPTIONS="SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P3041DS_defconfig b/configs/P3041DS_defconfig index ffed6a7..9d567db 100644 --- a/configs/P3041DS_defconfig +++ b/configs/P3041DS_defconfig @@ -3,3 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P3041DS=y CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P4080DS_SDCARD_defconfig b/configs/P4080DS_SDCARD_defconfig index f683c38..30eb293 100644 --- a/configs/P4080DS_SDCARD_defconfig +++ b/configs/P4080DS_SDCARD_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P4080DS=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P4080DS_SECURE_BOOT_defconfig b/configs/P4080DS_SECURE_BOOT_defconfig index 1d4a128..cf7d6cd 100644 --- a/configs/P4080DS_SECURE_BOOT_defconfig +++ b/configs/P4080DS_SECURE_BOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P4080DS=y CONFIG_SYS_EXTRA_OPTIONS="SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P4080DS_SPIFLASH_defconfig b/configs/P4080DS_SPIFLASH_defconfig index 5b5ca77..7004e92 100644 --- a/configs/P4080DS_SPIFLASH_defconfig +++ b/configs/P4080DS_SPIFLASH_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P4080DS=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P4080DS_SRIO_PCIE_BOOT_defconfig b/configs/P4080DS_SRIO_PCIE_BOOT_defconfig index 8443412..f363d3e 100644 --- a/configs/P4080DS_SRIO_PCIE_BOOT_defconfig +++ b/configs/P4080DS_SRIO_PCIE_BOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P4080DS=y CONFIG_SYS_EXTRA_OPTIONS="SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P4080DS_defconfig b/configs/P4080DS_defconfig index 34b6979..233efa5 100644 --- a/configs/P4080DS_defconfig +++ b/configs/P4080DS_defconfig @@ -3,3 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P4080DS=y CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P5020DS_NAND_defconfig b/configs/P5020DS_NAND_defconfig index 55e2e10..3f68674 100644 --- a/configs/P5020DS_NAND_defconfig +++ b/configs/P5020DS_NAND_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P5020DS=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P5020DS_SDCARD_defconfig b/configs/P5020DS_SDCARD_defconfig index 087815b..f13b634 100644 --- a/configs/P5020DS_SDCARD_defconfig +++ b/configs/P5020DS_SDCARD_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P5020DS=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P5020DS_SECURE_BOOT_defconfig b/configs/P5020DS_SECURE_BOOT_defconfig index adb65ae..6552ba8 100644 --- a/configs/P5020DS_SECURE_BOOT_defconfig +++ b/configs/P5020DS_SECURE_BOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P5020DS=y CONFIG_SYS_EXTRA_OPTIONS="SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P5020DS_SPIFLASH_defconfig b/configs/P5020DS_SPIFLASH_defconfig index 6e86ea0..3ba0c35 100644 --- a/configs/P5020DS_SPIFLASH_defconfig +++ b/configs/P5020DS_SPIFLASH_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P5020DS=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P5020DS_SRIO_PCIE_BOOT_defconfig b/configs/P5020DS_SRIO_PCIE_BOOT_defconfig index 8772c7b..9106466 100644 --- a/configs/P5020DS_SRIO_PCIE_BOOT_defconfig +++ b/configs/P5020DS_SRIO_PCIE_BOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P5020DS=y CONFIG_SYS_EXTRA_OPTIONS="SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P5020DS_defconfig b/configs/P5020DS_defconfig index f4b8b3c..c4d6a2c 100644 --- a/configs/P5020DS_defconfig +++ b/configs/P5020DS_defconfig @@ -3,3 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P5020DS=y CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P5040DS_NAND_defconfig b/configs/P5040DS_NAND_defconfig index 9f7b45b..0a9ff2d 100644 --- a/configs/P5040DS_NAND_defconfig +++ b/configs/P5040DS_NAND_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P5040DS=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P5040DS_SDCARD_defconfig b/configs/P5040DS_SDCARD_defconfig index dd78085..cc40316 100644 --- a/configs/P5040DS_SDCARD_defconfig +++ b/configs/P5040DS_SDCARD_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P5040DS=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P5040DS_SECURE_BOOT_defconfig b/configs/P5040DS_SECURE_BOOT_defconfig index 2224bb2..da1e300 100644 --- a/configs/P5040DS_SECURE_BOOT_defconfig +++ b/configs/P5040DS_SECURE_BOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P5040DS=y CONFIG_SYS_EXTRA_OPTIONS="SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P5040DS_SPIFLASH_defconfig b/configs/P5040DS_SPIFLASH_defconfig index e3b7896..8fb6e78 100644 --- a/configs/P5040DS_SPIFLASH_defconfig +++ b/configs/P5040DS_SPIFLASH_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_P5040DS=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/P5040DS_defconfig b/configs/P5040DS_defconfig index d2f9c06..9b83d0b 100644 --- a/configs/P5040DS_defconfig +++ b/configs/P5040DS_defconfig @@ -3,3 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P5040DS=y CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/PLU405_defconfig b/configs/PLU405_defconfig index f7da980..50f52a3 100644 --- a/configs/PLU405_defconfig +++ b/configs/PLU405_defconfig @@ -1,7 +1,7 @@ CONFIG_PPC=y -CONFIG_CMD_NET=y CONFIG_4xx=y CONFIG_TARGET_PLU405=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_NET=y diff --git a/configs/PMC405DE_defconfig b/configs/PMC405DE_defconfig index aec6b51..1246542 100644 --- a/configs/PMC405DE_defconfig +++ b/configs/PMC405DE_defconfig @@ -1,7 +1,7 @@ CONFIG_PPC=y -CONFIG_CMD_NET=y CONFIG_4xx=y CONFIG_TARGET_PMC405DE=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_NET=y diff --git a/configs/PMC440_defconfig b/configs/PMC440_defconfig index 44c81b3..bca6fc0 100644 --- a/configs/PMC440_defconfig +++ b/configs/PMC440_defconfig @@ -1,7 +1,7 @@ CONFIG_PPC=y -CONFIG_CMD_NET=y CONFIG_4xx=y CONFIG_TARGET_PMC440=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_NET=y diff --git a/configs/T1023RDB_NAND_defconfig b/configs/T1023RDB_NAND_defconfig index a1a32d5..d9f72e5 100644 --- a/configs/T1023RDB_NAND_defconfig +++ b/configs/T1023RDB_NAND_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1023,T1023RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1023RDB_SDCARD_defconfig b/configs/T1023RDB_SDCARD_defconfig index 93b39d6..3f8e04c 100644 --- a/configs/T1023RDB_SDCARD_defconfig +++ b/configs/T1023RDB_SDCARD_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1023,T1023RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1023RDB_SECURE_BOOT_defconfig b/configs/T1023RDB_SECURE_BOOT_defconfig index 35ac227..49979b3 100644 --- a/configs/T1023RDB_SECURE_BOOT_defconfig +++ b/configs/T1023RDB_SECURE_BOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T102XRDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1023,T1023RDB,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1023RDB_SPIFLASH_defconfig b/configs/T1023RDB_SPIFLASH_defconfig index 9fc6576..cb45acb 100644 --- a/configs/T1023RDB_SPIFLASH_defconfig +++ b/configs/T1023RDB_SPIFLASH_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1023,T1023RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1023RDB_defconfig b/configs/T1023RDB_defconfig index 7075b28..abb7c3f 100644 --- a/configs/T1023RDB_defconfig +++ b/configs/T1023RDB_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T102XRDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1023,T1023RDB" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1024QDS_D4_SECURE_BOOT_defconfig b/configs/T1024QDS_D4_SECURE_BOOT_defconfig index 329dd15..0585b6a 100644 --- a/configs/T1024QDS_D4_SECURE_BOOT_defconfig +++ b/configs/T1024QDS_D4_SECURE_BOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T102XQDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,SYS_FSL_DDR4,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1024QDS_NAND_defconfig b/configs/T1024QDS_NAND_defconfig index 57a452a..c4ddf7a 100644 --- a/configs/T1024QDS_NAND_defconfig +++ b/configs/T1024QDS_NAND_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,RAMBOOT_PBL,SPL_FSL_PBL,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1024QDS_SDCARD_defconfig b/configs/T1024QDS_SDCARD_defconfig index 6fd626b..8e384ac 100644 --- a/configs/T1024QDS_SDCARD_defconfig +++ b/configs/T1024QDS_SDCARD_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1024QDS_SECURE_BOOT_defconfig b/configs/T1024QDS_SECURE_BOOT_defconfig index 2dc1e64..a4d594a 100644 --- a/configs/T1024QDS_SECURE_BOOT_defconfig +++ b/configs/T1024QDS_SECURE_BOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T102XQDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1024QDS_SPIFLASH_defconfig b/configs/T1024QDS_SPIFLASH_defconfig index 89ce4eb..dc043f9 100644 --- a/configs/T1024QDS_SPIFLASH_defconfig +++ b/configs/T1024QDS_SPIFLASH_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1024QDS_defconfig b/configs/T1024QDS_defconfig index 61f13d3..b9f875c 100644 --- a/configs/T1024QDS_defconfig +++ b/configs/T1024QDS_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T102XQDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1024RDB_NAND_defconfig b/configs/T1024RDB_NAND_defconfig index 13f7586..db1262e 100644 --- a/configs/T1024RDB_NAND_defconfig +++ b/configs/T1024RDB_NAND_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,T1024RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1024RDB_SDCARD_defconfig b/configs/T1024RDB_SDCARD_defconfig index 8beb714..dd80c76 100644 --- a/configs/T1024RDB_SDCARD_defconfig +++ b/configs/T1024RDB_SDCARD_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,T1024RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1024RDB_SECURE_BOOT_defconfig b/configs/T1024RDB_SECURE_BOOT_defconfig index 79f68c6..5c2fe2a 100644 --- a/configs/T1024RDB_SECURE_BOOT_defconfig +++ b/configs/T1024RDB_SECURE_BOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T102XRDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,T1024RDB,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1024RDB_SPIFLASH_defconfig b/configs/T1024RDB_SPIFLASH_defconfig index e323f57..9157945 100644 --- a/configs/T1024RDB_SPIFLASH_defconfig +++ b/configs/T1024RDB_SPIFLASH_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,T1024RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1024RDB_defconfig b/configs/T1024RDB_defconfig index 7e69b92..ac0b8c1 100644 --- a/configs/T1024RDB_defconfig +++ b/configs/T1024RDB_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T102XRDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,T1024RDB" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1040QDS_D4_defconfig b/configs/T1040QDS_D4_defconfig index bfe077a..5a80d6b 100644 --- a/configs/T1040QDS_D4_defconfig +++ b/configs/T1040QDS_D4_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T1040QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,SYS_FSL_DDR4" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1040QDS_SECURE_BOOT_defconfig b/configs/T1040QDS_SECURE_BOOT_defconfig index 043db10..6ad6182 100644 --- a/configs/T1040QDS_SECURE_BOOT_defconfig +++ b/configs/T1040QDS_SECURE_BOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T1040QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1040QDS_defconfig b/configs/T1040QDS_defconfig index fbfa5fb..dee5c36 100644 --- a/configs/T1040QDS_defconfig +++ b/configs/T1040QDS_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T1040QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1040RDB_NAND_defconfig b/configs/T1040RDB_NAND_defconfig index 70c0b59..3a1bb2b 100644 --- a/configs/T1040RDB_NAND_defconfig +++ b/configs/T1040RDB_NAND_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1040RDB_SDCARD_defconfig b/configs/T1040RDB_SDCARD_defconfig index 980189c..3247915 100644 --- a/configs/T1040RDB_SDCARD_defconfig +++ b/configs/T1040RDB_SDCARD_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1040RDB_SECURE_BOOT_defconfig b/configs/T1040RDB_SECURE_BOOT_defconfig index 2dd87ed..6faadec 100644 --- a/configs/T1040RDB_SECURE_BOOT_defconfig +++ b/configs/T1040RDB_SECURE_BOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T104XRDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,SECURE_BOOT,T1040RDB" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1040RDB_SPIFLASH_defconfig b/configs/T1040RDB_SPIFLASH_defconfig index 2efe475..3a68fe2 100644 --- a/configs/T1040RDB_SPIFLASH_defconfig +++ b/configs/T1040RDB_SPIFLASH_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1040RDB_defconfig b/configs/T1040RDB_defconfig index 9db5699..a348ad8 100644 --- a/configs/T1040RDB_defconfig +++ b/configs/T1040RDB_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T104XRDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040RDB" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1042RDB_PI_NAND_defconfig b/configs/T1042RDB_PI_NAND_defconfig index f1cebff..2944aff 100644 --- a/configs/T1042RDB_PI_NAND_defconfig +++ b/configs/T1042RDB_PI_NAND_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042RDB_PI,RAMBOOT_PBL,SPL_FSL_PBL,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1042RDB_PI_SDCARD_defconfig b/configs/T1042RDB_PI_SDCARD_defconfig index 0d27434..8272cff 100644 --- a/configs/T1042RDB_PI_SDCARD_defconfig +++ b/configs/T1042RDB_PI_SDCARD_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042RDB_PI,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1042RDB_PI_SPIFLASH_defconfig b/configs/T1042RDB_PI_SPIFLASH_defconfig index f6589a8..8c2e6fa 100644 --- a/configs/T1042RDB_PI_SPIFLASH_defconfig +++ b/configs/T1042RDB_PI_SPIFLASH_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042RDB_PI,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1042RDB_PI_defconfig b/configs/T1042RDB_PI_defconfig index 2b4094e..626d0fa 100644 --- a/configs/T1042RDB_PI_defconfig +++ b/configs/T1042RDB_PI_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T104XRDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042RDB_PI" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1042RDB_SECURE_BOOT_defconfig b/configs/T1042RDB_SECURE_BOOT_defconfig index bed4c93..36ac136 100644 --- a/configs/T1042RDB_SECURE_BOOT_defconfig +++ b/configs/T1042RDB_SECURE_BOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T104XRDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,SECURE_BOOT,T1042RDB" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T1042RDB_defconfig b/configs/T1042RDB_defconfig index b2387f2..6451b31 100644 --- a/configs/T1042RDB_defconfig +++ b/configs/T1042RDB_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T104XRDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042RDB" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T2080QDS_NAND_defconfig b/configs/T2080QDS_NAND_defconfig index 5ca32a6..21c6eae 100644 --- a/configs/T2080QDS_NAND_defconfig +++ b/configs/T2080QDS_NAND_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T2080QDS_SDCARD_defconfig b/configs/T2080QDS_SDCARD_defconfig index 0947d33..c3a5416 100644 --- a/configs/T2080QDS_SDCARD_defconfig +++ b/configs/T2080QDS_SDCARD_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T2080QDS_SECURE_BOOT_defconfig b/configs/T2080QDS_SECURE_BOOT_defconfig index 2d05aa5..1607864 100644 --- a/configs/T2080QDS_SECURE_BOOT_defconfig +++ b/configs/T2080QDS_SECURE_BOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T208XQDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T2080QDS_SPIFLASH_defconfig b/configs/T2080QDS_SPIFLASH_defconfig index 82df11c..9b29955 100644 --- a/configs/T2080QDS_SPIFLASH_defconfig +++ b/configs/T2080QDS_SPIFLASH_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig b/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig index d46934a..e208015 100644 --- a/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig +++ b/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T208XQDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T2080QDS_defconfig b/configs/T2080QDS_defconfig index 0b9abc0..d85957a 100644 --- a/configs/T2080QDS_defconfig +++ b/configs/T2080QDS_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T208XQDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T2080RDB_NAND_defconfig b/configs/T2080RDB_NAND_defconfig index f6c386c..292ca5e 100644 --- a/configs/T2080RDB_NAND_defconfig +++ b/configs/T2080RDB_NAND_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T2080RDB_SDCARD_defconfig b/configs/T2080RDB_SDCARD_defconfig index ffef84d..8cbc37b 100644 --- a/configs/T2080RDB_SDCARD_defconfig +++ b/configs/T2080RDB_SDCARD_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T2080RDB_SECURE_BOOT_defconfig b/configs/T2080RDB_SECURE_BOOT_defconfig index 0c1eaf9..373d57a 100644 --- a/configs/T2080RDB_SECURE_BOOT_defconfig +++ b/configs/T2080RDB_SECURE_BOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T208XRDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T2080RDB_SPIFLASH_defconfig b/configs/T2080RDB_SPIFLASH_defconfig index 84ca685..7d423d4 100644 --- a/configs/T2080RDB_SPIFLASH_defconfig +++ b/configs/T2080RDB_SPIFLASH_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T2080RDB_SRIO_PCIE_BOOT_defconfig b/configs/T2080RDB_SRIO_PCIE_BOOT_defconfig index 9e147c7..df747c4 100644 --- a/configs/T2080RDB_SRIO_PCIE_BOOT_defconfig +++ b/configs/T2080RDB_SRIO_PCIE_BOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T208XRDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T2080RDB_defconfig b/configs/T2080RDB_defconfig index 7a6f88c..598d08a 100644 --- a/configs/T2080RDB_defconfig +++ b/configs/T2080RDB_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T208XRDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T2081QDS_NAND_defconfig b/configs/T2081QDS_NAND_defconfig index 2c41e9c..c4cc522 100644 --- a/configs/T2081QDS_NAND_defconfig +++ b/configs/T2081QDS_NAND_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2081,RAMBOOT_PBL,SPL_FSL_PBL,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T2081QDS_SDCARD_defconfig b/configs/T2081QDS_SDCARD_defconfig index 99b74a9..b1848d5 100644 --- a/configs/T2081QDS_SDCARD_defconfig +++ b/configs/T2081QDS_SDCARD_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2081,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T2081QDS_SPIFLASH_defconfig b/configs/T2081QDS_SPIFLASH_defconfig index 6d8f16c..82cc518 100644 --- a/configs/T2081QDS_SPIFLASH_defconfig +++ b/configs/T2081QDS_SPIFLASH_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2081,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T2081QDS_SRIO_PCIE_BOOT_defconfig b/configs/T2081QDS_SRIO_PCIE_BOOT_defconfig index 6179808..33f9989 100644 --- a/configs/T2081QDS_SRIO_PCIE_BOOT_defconfig +++ b/configs/T2081QDS_SRIO_PCIE_BOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T208XQDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2081,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T2081QDS_defconfig b/configs/T2081QDS_defconfig index 55fb344..54f397c 100644 --- a/configs/T2081QDS_defconfig +++ b/configs/T2081QDS_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T208XQDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2081" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T4160QDS_NAND_defconfig b/configs/T4160QDS_NAND_defconfig index 47702ea..f06b2d9 100644 --- a/configs/T4160QDS_NAND_defconfig +++ b/configs/T4160QDS_NAND_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4160,RAMBOOT_PBL,SPL_FSL_PBL,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T4160QDS_SDCARD_defconfig b/configs/T4160QDS_SDCARD_defconfig index 6476375..3bca2a3 100644 --- a/configs/T4160QDS_SDCARD_defconfig +++ b/configs/T4160QDS_SDCARD_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4160,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T4160QDS_SECURE_BOOT_defconfig b/configs/T4160QDS_SECURE_BOOT_defconfig index c4ea42a..88af280 100644 --- a/configs/T4160QDS_SECURE_BOOT_defconfig +++ b/configs/T4160QDS_SECURE_BOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T4240QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4160,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T4160QDS_defconfig b/configs/T4160QDS_defconfig index a2fe946..a0bfef3 100644 --- a/configs/T4160QDS_defconfig +++ b/configs/T4160QDS_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T4240QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4160" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T4160RDB_defconfig b/configs/T4160RDB_defconfig index c892a02..26707f4 100644 --- a/configs/T4160RDB_defconfig +++ b/configs/T4160RDB_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T4240RDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4160" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T4240QDS_NAND_defconfig b/configs/T4240QDS_NAND_defconfig index af933e0..aa3d1c8 100644 --- a/configs/T4240QDS_NAND_defconfig +++ b/configs/T4240QDS_NAND_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4240,RAMBOOT_PBL,SPL_FSL_PBL,NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T4240QDS_SDCARD_defconfig b/configs/T4240QDS_SDCARD_defconfig index aa98a43..6e2c7cd 100644 --- a/configs/T4240QDS_SDCARD_defconfig +++ b/configs/T4240QDS_SDCARD_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4240,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T4240QDS_SECURE_BOOT_defconfig b/configs/T4240QDS_SECURE_BOOT_defconfig index 60d205e..d49b3ca 100644 --- a/configs/T4240QDS_SECURE_BOOT_defconfig +++ b/configs/T4240QDS_SECURE_BOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T4240QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4240,SECURE_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T4240QDS_SRIO_PCIE_BOOT_defconfig b/configs/T4240QDS_SRIO_PCIE_BOOT_defconfig index 67dda4c..10a8261 100644 --- a/configs/T4240QDS_SRIO_PCIE_BOOT_defconfig +++ b/configs/T4240QDS_SRIO_PCIE_BOOT_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T4240QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4240,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T4240QDS_defconfig b/configs/T4240QDS_defconfig index a36e429..bd204db 100644 --- a/configs/T4240QDS_defconfig +++ b/configs/T4240QDS_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T4240QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4240" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T4240RDB_SDCARD_defconfig b/configs/T4240RDB_SDCARD_defconfig index 5b5b34d..1bbe564 100644 --- a/configs/T4240RDB_SDCARD_defconfig +++ b/configs/T4240RDB_SDCARD_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4240,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/T4240RDB_defconfig b/configs/T4240RDB_defconfig index e65c62c..932e970 100644 --- a/configs/T4240RDB_defconfig +++ b/configs/T4240RDB_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_T4240RDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4240" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/TZX-Q8-713B7_defconfig b/configs/TZX-Q8-713B7_defconfig index c33317e..08f9153 100644 --- a/configs/TZX-Q8-713B7_defconfig +++ b/configs/TZX-Q8-713B7_defconfig @@ -12,5 +12,11 @@ CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-tzx-q8-713b7" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y diff --git a/configs/UCP1020_SPIFLASH_defconfig b/configs/UCP1020_SPIFLASH_defconfig index 18691aa..779c7a3 100644 --- a/configs/UCP1020_SPIFLASH_defconfig +++ b/configs/UCP1020_SPIFLASH_defconfig @@ -1,9 +1,10 @@ CONFIG_PPC=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_MPC85xx=y CONFIG_TARGET_UCP1020=y CONFIG_TARGET_UCP1020_SPIFLASH=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/UCP1020_defconfig b/configs/UCP1020_defconfig index f9f45ae..60f7aa3 100644 --- a/configs/UCP1020_defconfig +++ b/configs/UCP1020_defconfig @@ -1,8 +1,9 @@ CONFIG_PPC=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_MPC85xx=y CONFIG_TARGET_UCP1020=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/UTOO_P66_defconfig b/configs/UTOO_P66_defconfig index 9ab2fa5..a124df7 100644 --- a/configs/UTOO_P66_defconfig +++ b/configs/UTOO_P66_defconfig @@ -16,7 +16,11 @@ CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_VIDEO_LCD_TL059WV5C0=y CONFIG_USB_MUSB_SUNXI=y -# CONFIG_DM_SERIAL is not set CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-utoo-p66" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y diff --git a/configs/Wexler_TAB7200_defconfig b/configs/Wexler_TAB7200_defconfig index 011e921..2df27dd 100644 --- a/configs/Wexler_TAB7200_defconfig +++ b/configs/Wexler_TAB7200_defconfig @@ -7,5 +7,13 @@ CONFIG_VIDEO_LCD_POWER="PH8" CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wexler-tab7200" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/Wits_Pro_A20_DKT_defconfig b/configs/Wits_Pro_A20_DKT_defconfig index 8bdca23..b443938 100644 --- a/configs/Wits_Pro_A20_DKT_defconfig +++ b/configs/Wits_Pro_A20_DKT_defconfig @@ -9,6 +9,14 @@ CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_VIDEO_LCD_PANEL_LVDS=y CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wits-pro-a20-dkt" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/Yones_Toptech_BD1078_defconfig b/configs/Yones_Toptech_BD1078_defconfig index 346e689..341748a 100644 --- a/configs/Yones_Toptech_BD1078_defconfig +++ b/configs/Yones_Toptech_BD1078_defconfig @@ -18,5 +18,11 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_VIDEO_LCD_PANEL_LVDS=y CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-yones-toptech-bd1078" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y diff --git a/configs/a4m072_defconfig b/configs/a4m072_defconfig index c979493..3744669 100644 --- a/configs/a4m072_defconfig +++ b/configs/a4m072_defconfig @@ -1,7 +1,7 @@ CONFIG_PPC=y -CONFIG_CMD_NET=y CONFIG_MPC5xxx=y CONFIG_TARGET_A4M072=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="asdfg" +CONFIG_CMD_NET=y diff --git a/configs/alt_defconfig b/configs/alt_defconfig index 0006eba..66ba1d6 100644 --- a/configs/alt_defconfig +++ b/configs/alt_defconfig @@ -2,4 +2,5 @@ CONFIG_ARM=y CONFIG_RMOBILE=y CONFIG_TARGET_ALT=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y CONFIG_SH_SDHI=y diff --git a/configs/am335x_baltos_defconfig b/configs/am335x_baltos_defconfig index 679b04f..d5531f8 100644 --- a/configs/am335x_baltos_defconfig +++ b/configs/am335x_baltos_defconfig @@ -1,7 +1,7 @@ +CONFIG_ARM=y +CONFIG_TARGET_AM335X_BALTOS=y CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_CONS_INDEX=1 -CONFIG_ARM=y -CONFIG_TARGET_AM335X_BALTOS=y diff --git a/configs/am335x_boneblack_defconfig b/configs/am335x_boneblack_defconfig index 07ebb17..b9a0a59 100644 --- a/configs/am335x_boneblack_defconfig +++ b/configs/am335x_boneblack_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/am335x_boneblack_vboot_defconfig b/configs/am335x_boneblack_vboot_defconfig index 67ad959..bcdeb44 100644 --- a/configs/am335x_boneblack_vboot_defconfig +++ b/configs/am335x_boneblack_vboot_defconfig @@ -1,6 +1,5 @@ CONFIG_ARM=y CONFIG_TARGET_AM335X_EVM=y -CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="am335x-boneblack" CONFIG_SPL=y CONFIG_SPL_STACK_R=y @@ -11,3 +10,5 @@ CONFIG_FIT_SIGNATURE=y CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT,ENABLE_VBOOT" CONFIG_CMD_NET=y CONFIG_OF_CONTROL=y +CONFIG_SPL_DISABLE_OF_CONTROL=y +CONFIG_SPI_FLASH=y diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig index f06baa6..23fed39 100644 --- a/configs/am335x_evm_defconfig +++ b/configs/am335x_evm_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/am335x_evm_nor_defconfig b/configs/am335x_evm_nor_defconfig index c288528..3500f90 100644 --- a/configs/am335x_evm_nor_defconfig +++ b/configs/am335x_evm_nor_defconfig @@ -6,3 +6,4 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/am335x_evm_norboot_defconfig b/configs/am335x_evm_norboot_defconfig index 49ea2f8..6a2ad82 100644 --- a/configs/am335x_evm_norboot_defconfig +++ b/configs/am335x_evm_norboot_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_AM335X_EVM=y CONFIG_NOR=y CONFIG_NOR_BOOT=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/am335x_evm_spiboot_defconfig b/configs/am335x_evm_spiboot_defconfig index 56e9ea1..d53c878 100644 --- a/configs/am335x_evm_spiboot_defconfig +++ b/configs/am335x_evm_spiboot_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_SYS_EXTRA_OPTIONS="SPI_BOOT" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/am335x_evm_usbspl_defconfig b/configs/am335x_evm_usbspl_defconfig index 88598b0..50da93c 100644 --- a/configs/am335x_evm_usbspl_defconfig +++ b/configs/am335x_evm_usbspl_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_SYS_EXTRA_OPTIONS="NAND,SPL_USBETH_SUPPORT" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/am43xx_evm_defconfig b/configs/am43xx_evm_defconfig index 29a3892..6acbe88 100644 --- a/configs/am43xx_evm_defconfig +++ b/configs/am43xx_evm_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_AM43XX_EVM=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/am43xx_evm_ethboot_defconfig b/configs/am43xx_evm_ethboot_defconfig index 5b07cc1..51845a5 100644 --- a/configs/am43xx_evm_ethboot_defconfig +++ b/configs/am43xx_evm_ethboot_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_AM43XX_EVM=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_ETH_SUPPORT" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/am43xx_evm_qspiboot_defconfig b/configs/am43xx_evm_qspiboot_defconfig index 6b06cff..7ee15c0 100644 --- a/configs/am43xx_evm_qspiboot_defconfig +++ b/configs/am43xx_evm_qspiboot_defconfig @@ -2,3 +2,4 @@ CONFIG_ARM=y CONFIG_TARGET_AM43XX_EVM=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,QSPI,QSPI_BOOT" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/am43xx_evm_usbhost_boot_defconfig b/configs/am43xx_evm_usbhost_boot_defconfig index 071deac..1bc1009 100644 --- a/configs/am43xx_evm_usbhost_boot_defconfig +++ b/configs/am43xx_evm_usbhost_boot_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_AM43XX_EVM=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_USB_HOST_SUPPORT" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/ap325rxa_defconfig b/configs/ap325rxa_defconfig index c34d7e9..ef5964a 100644 --- a/configs/ap325rxa_defconfig +++ b/configs/ap325rxa_defconfig @@ -1,3 +1,4 @@ CONFIG_SH=y CONFIG_TARGET_AP325RXA=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/ap_sh4a_4a_defconfig b/configs/ap_sh4a_4a_defconfig index 16c1132..1c6a0cc 100644 --- a/configs/ap_sh4a_4a_defconfig +++ b/configs/ap_sh4a_4a_defconfig @@ -1,3 +1,4 @@ CONFIG_SH=y CONFIG_TARGET_AP_SH4A_4A=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/apalis_t30_defconfig b/configs/apalis_t30_defconfig index 9ec73f2..04b03c4 100644 --- a/configs/apalis_t30_defconfig +++ b/configs/apalis_t30_defconfig @@ -5,3 +5,7 @@ CONFIG_TARGET_APALIS_T30=y CONFIG_DEFAULT_DEVICE_TREE="tegra30-apalis" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPL_DM=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/arcangel4-be_defconfig b/configs/arcangel4-be_defconfig index 2f9d0c8..7f0402c 100644 --- a/configs/arcangel4-be_defconfig +++ b/configs/arcangel4-be_defconfig @@ -2,10 +2,11 @@ CONFIG_ARC=y CONFIG_CPU_BIG_ENDIAN=y CONFIG_TARGET_ARCANGEL4=y CONFIG_SYS_CLK_FREQ=70000000 -CONFIG_DM_SERIAL=y CONFIG_SYS_TEXT_BASE=0x81000000 CONFIG_DEFAULT_DEVICE_TREE="arcangel4" CONFIG_CMD_NET=y CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_DM=y +CONFIG_DM_SERIAL=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/arcangel4_defconfig b/configs/arcangel4_defconfig index f1bfba0..b3df518 100644 --- a/configs/arcangel4_defconfig +++ b/configs/arcangel4_defconfig @@ -1,10 +1,11 @@ CONFIG_ARC=y CONFIG_TARGET_ARCANGEL4=y CONFIG_SYS_CLK_FREQ=70000000 -CONFIG_DM_SERIAL=y CONFIG_SYS_TEXT_BASE=0x81000000 CONFIG_DEFAULT_DEVICE_TREE="arcangel4" CONFIG_CMD_NET=y CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_DM=y +CONFIG_DM_SERIAL=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/aristainetos2_defconfig b/configs/aristainetos2_defconfig index af92f69..c3f60a1 100644 --- a/configs/aristainetos2_defconfig +++ b/configs/aristainetos2_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_ARISTAINETOS2=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg,MX6DL" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/aristainetos_defconfig b/configs/aristainetos_defconfig index 306d4a8..12e09ce 100644 --- a/configs/aristainetos_defconfig +++ b/configs/aristainetos_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_ARISTAINETOS=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos.cfg,MX6DL" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/arndale_defconfig b/configs/arndale_defconfig index 43f39f2..21a2100 100644 --- a/configs/arndale_defconfig +++ b/configs/arndale_defconfig @@ -10,3 +10,5 @@ CONFIG_I2S=y CONFIG_I2S_SAMSUNG=y CONFIG_SOUND_MAX98095=y CONFIG_SOUND_WM8994=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/at91sam9n12ek_mmc_defconfig b/configs/at91sam9n12ek_mmc_defconfig index 463e23c..d35eec5 100644 --- a/configs/at91sam9n12ek_mmc_defconfig +++ b/configs/at91sam9n12ek_mmc_defconfig @@ -3,3 +3,4 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9N12EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_MMC" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/at91sam9n12ek_nandflash_defconfig b/configs/at91sam9n12ek_nandflash_defconfig index a554f83..b030f91 100644 --- a/configs/at91sam9n12ek_nandflash_defconfig +++ b/configs/at91sam9n12ek_nandflash_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_AT91SAM9N12EK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_NANDFLASH" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/at91sam9n12ek_spiflash_defconfig b/configs/at91sam9n12ek_spiflash_defconfig index b4bddbc..b523e8b 100644 --- a/configs/at91sam9n12ek_spiflash_defconfig +++ b/configs/at91sam9n12ek_spiflash_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_AT91SAM9N12EK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_SPIFLASH" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/at91sam9x5ek_dataflash_defconfig b/configs/at91sam9x5ek_dataflash_defconfig index 6662721..b3dff9c 100644 --- a/configs/at91sam9x5ek_dataflash_defconfig +++ b/configs/at91sam9x5ek_dataflash_defconfig @@ -3,3 +3,4 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9X5EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_DATAFLASH" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/at91sam9x5ek_mmc_defconfig b/configs/at91sam9x5ek_mmc_defconfig index 85b2429..8a27e0c 100644 --- a/configs/at91sam9x5ek_mmc_defconfig +++ b/configs/at91sam9x5ek_mmc_defconfig @@ -3,3 +3,4 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9X5EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_MMC" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/at91sam9x5ek_nandflash_defconfig b/configs/at91sam9x5ek_nandflash_defconfig index a1d3f2d..d0bdb27 100644 --- a/configs/at91sam9x5ek_nandflash_defconfig +++ b/configs/at91sam9x5ek_nandflash_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_AT91SAM9X5EK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_NANDFLASH" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/at91sam9x5ek_spiflash_defconfig b/configs/at91sam9x5ek_spiflash_defconfig index 27e4f18..33778a5 100644 --- a/configs/at91sam9x5ek_spiflash_defconfig +++ b/configs/at91sam9x5ek_spiflash_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_AT91SAM9X5EK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_SPIFLASH" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/atngw100_defconfig b/configs/atngw100_defconfig index 03ce63b..b1bf01f 100644 --- a/configs/atngw100_defconfig +++ b/configs/atngw100_defconfig @@ -1,7 +1,8 @@ CONFIG_AVR32=y -CONFIG_CMD_NET=y CONFIG_TARGET_ATNGW100=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/atngw100mkii_defconfig b/configs/atngw100mkii_defconfig index 2d1845f..b4014df 100644 --- a/configs/atngw100mkii_defconfig +++ b/configs/atngw100mkii_defconfig @@ -1,7 +1,8 @@ CONFIG_AVR32=y -CONFIG_CMD_NET=y CONFIG_TARGET_ATNGW100MKII=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/atstk1002_defconfig b/configs/atstk1002_defconfig index f74060e..6f25f3b 100644 --- a/configs/atstk1002_defconfig +++ b/configs/atstk1002_defconfig @@ -1,7 +1,7 @@ CONFIG_AVR32=y -CONFIG_CMD_NET=y CONFIG_TARGET_ATSTK1002=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_NET=y diff --git a/configs/axm_defconfig b/configs/axm_defconfig index d7dd3fd..fdd26df 100644 --- a/configs/axm_defconfig +++ b/configs/axm_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_TAURUS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2068,BOARD_AXM" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/axs101_defconfig b/configs/axs101_defconfig index 61c56e6..008df4b 100644 --- a/configs/axs101_defconfig +++ b/configs/axs101_defconfig @@ -3,7 +3,8 @@ CONFIG_SYS_DCACHE_OFF=y CONFIG_ARC_CACHE_LINE_SHIFT=5 CONFIG_TARGET_AXS101=y CONFIG_SYS_CLK_FREQ=750000000 -CONFIG_NETDEVICES=y CONFIG_SYS_TEXT_BASE=0x81000000 CONFIG_CMD_NET=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/axs103_defconfig b/configs/axs103_defconfig index 444a95d..3b424e2 100644 --- a/configs/axs103_defconfig +++ b/configs/axs103_defconfig @@ -2,7 +2,8 @@ CONFIG_ARC=y CONFIG_ISA_ARCV2=y CONFIG_TARGET_AXS101=y CONFIG_SYS_CLK_FREQ=50000000 -CONFIG_NETDEVICES=y CONFIG_SYS_TEXT_BASE=0x81000000 CONFIG_CMD_NET=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig index f2ab415..198c6f8 100644 --- a/configs/ba10_tv_box_defconfig +++ b/configs/ba10_tv_box_defconfig @@ -5,5 +5,13 @@ CONFIG_DRAM_CLK=384 CONFIG_DRAM_EMR1=4 CONFIG_USB2_VBUS_PIN="PH12" CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-ba10-tvbox" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/beaver_defconfig b/configs/beaver_defconfig index a73d151..6b01fe0 100644 --- a/configs/beaver_defconfig +++ b/configs/beaver_defconfig @@ -4,3 +4,8 @@ CONFIG_TEGRA30=y CONFIG_TARGET_BEAVER=y CONFIG_DEFAULT_DEVICE_TREE="tegra30-beaver" CONFIG_CMD_NET=y +CONFIG_SPL_DM=y +CONFIG_SPI_FLASH=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/bf518f-ezbrd_defconfig b/configs/bf518f-ezbrd_defconfig index 8406294..dd8a647 100644 --- a/configs/bf518f-ezbrd_defconfig +++ b/configs/bf518f-ezbrd_defconfig @@ -2,4 +2,5 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF518F_EZBRD=y CONFIG_CMD_NET=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf525-ucr2_defconfig b/configs/bf525-ucr2_defconfig index 692e006..f1352e2 100644 --- a/configs/bf525-ucr2_defconfig +++ b/configs/bf525-ucr2_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF525_UCR2=y +CONFIG_SPI_FLASH=y diff --git a/configs/bf526-ezbrd_defconfig b/configs/bf526-ezbrd_defconfig index f557db0..e5132d5 100644 --- a/configs/bf526-ezbrd_defconfig +++ b/configs/bf526-ezbrd_defconfig @@ -2,4 +2,5 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF526_EZBRD=y CONFIG_CMD_NET=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf527-ad7160-eval_defconfig b/configs/bf527-ad7160-eval_defconfig index 47f53c9..16e6415 100644 --- a/configs/bf527-ad7160-eval_defconfig +++ b/configs/bf527-ad7160-eval_defconfig @@ -1,3 +1,4 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF527_AD7160_EVAL=y +CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf527-ezkit-v2_defconfig b/configs/bf527-ezkit-v2_defconfig index dd48d6a..5da5cd3 100644 --- a/configs/bf527-ezkit-v2_defconfig +++ b/configs/bf527-ezkit-v2_defconfig @@ -2,5 +2,6 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF527_EZKIT=y CONFIG_SYS_EXTRA_OPTIONS="BF527_EZKIT_REV_2_1" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y CONFIG_LIB_RAND=y diff --git a/configs/bf527-ezkit_defconfig b/configs/bf527-ezkit_defconfig index 25ef5a9..5d3cb55 100644 --- a/configs/bf527-ezkit_defconfig +++ b/configs/bf527-ezkit_defconfig @@ -2,4 +2,5 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF527_EZKIT=y CONFIG_CMD_NET=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf527-sdp_defconfig b/configs/bf527-sdp_defconfig index 57f47e9..261109e 100644 --- a/configs/bf527-sdp_defconfig +++ b/configs/bf527-sdp_defconfig @@ -1,3 +1,4 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF527_SDP=y +CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf537-minotaur_defconfig b/configs/bf537-minotaur_defconfig index 8e4ea92..83f31d8 100644 --- a/configs/bf537-minotaur_defconfig +++ b/configs/bf537-minotaur_defconfig @@ -2,3 +2,4 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF537_MINOTAUR=y CONFIG_CMD_NET=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPI_FLASH=y diff --git a/configs/bf537-pnav_defconfig b/configs/bf537-pnav_defconfig index 405471f..7b02a21 100644 --- a/configs/bf537-pnav_defconfig +++ b/configs/bf537-pnav_defconfig @@ -2,3 +2,4 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF537_PNAV=y CONFIG_CMD_NET=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPI_FLASH=y diff --git a/configs/bf537-srv1_defconfig b/configs/bf537-srv1_defconfig index 19d6832..cd8cc3e 100644 --- a/configs/bf537-srv1_defconfig +++ b/configs/bf537-srv1_defconfig @@ -2,3 +2,4 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF537_SRV1=y CONFIG_CMD_NET=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPI_FLASH=y diff --git a/configs/bf537-stamp_defconfig b/configs/bf537-stamp_defconfig index 753bbc4..9768bd6 100644 --- a/configs/bf537-stamp_defconfig +++ b/configs/bf537-stamp_defconfig @@ -2,4 +2,5 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF537_STAMP=y CONFIG_CMD_NET=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf548-ezkit_defconfig b/configs/bf548-ezkit_defconfig index 6bd9e9b..c09b4a0 100644 --- a/configs/bf548-ezkit_defconfig +++ b/configs/bf548-ezkit_defconfig @@ -1,5 +1,6 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF548_EZKIT=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y CONFIG_LIB_RAND=y diff --git a/configs/bf561-acvilon_defconfig b/configs/bf561-acvilon_defconfig index 7a65892..ff42a8b 100644 --- a/configs/bf561-acvilon_defconfig +++ b/configs/bf561-acvilon_defconfig @@ -1,5 +1,6 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF561_ACVILON=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y CONFIG_LIB_RAND=y diff --git a/configs/bf609-ezkit_defconfig b/configs/bf609-ezkit_defconfig index d8c2629..c7ceb55 100644 --- a/configs/bf609-ezkit_defconfig +++ b/configs/bf609-ezkit_defconfig @@ -1,6 +1,7 @@ CONFIG_BLACKFIN=y -CONFIG_NETDEVICES=y CONFIG_TARGET_BF609_EZKIT=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_LIB_RAND=y diff --git a/configs/bg0900_defconfig b/configs/bg0900_defconfig index 3e57959..ec4d8c0 100644 --- a/configs/bg0900_defconfig +++ b/configs/bg0900_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_BG0900=y CONFIG_SPL=y CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/birdland_bav335a_defconfig b/configs/birdland_bav335a_defconfig index 4d79c79..a81f843 100644 --- a/configs/birdland_bav335a_defconfig +++ b/configs/birdland_bav335a_defconfig @@ -4,3 +4,4 @@ CONFIG_BAV_VERSION=1 CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/birdland_bav335b_defconfig b/configs/birdland_bav335b_defconfig index f8745ee..9198955 100644 --- a/configs/birdland_bav335b_defconfig +++ b/configs/birdland_bav335b_defconfig @@ -4,3 +4,4 @@ CONFIG_BAV_VERSION=2 CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/blackstamp_defconfig b/configs/blackstamp_defconfig index c19a8f0..30e438f 100644 --- a/configs/blackstamp_defconfig +++ b/configs/blackstamp_defconfig @@ -1,3 +1,4 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BLACKSTAMP=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/blackvme_defconfig b/configs/blackvme_defconfig index 93b5ce5..272ecd7 100644 --- a/configs/blackvme_defconfig +++ b/configs/blackvme_defconfig @@ -1,3 +1,4 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BLACKVME=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/br4_defconfig b/configs/br4_defconfig index 7247b9c..573a62e 100644 --- a/configs/br4_defconfig +++ b/configs/br4_defconfig @@ -1,5 +1,6 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BR4=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y CONFIG_LIB_RAND=y diff --git a/configs/calimain_defconfig b/configs/calimain_defconfig index b1c5fa9..e1b6490 100644 --- a/configs/calimain_defconfig +++ b/configs/calimain_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_CALIMAIN=y -CONFIG_CMD_NET=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR="\x0b" +CONFIG_CMD_NET=y diff --git a/configs/cam_enc_4xx_defconfig b/configs/cam_enc_4xx_defconfig index 261f155..a7fe71d 100644 --- a/configs/cam_enc_4xx_defconfig +++ b/configs/cam_enc_4xx_defconfig @@ -3,3 +3,4 @@ CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_CAM_ENC_4XX=y CONFIG_SPL=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/cardhu_defconfig b/configs/cardhu_defconfig index 3f14178..37c0a6a 100644 --- a/configs/cardhu_defconfig +++ b/configs/cardhu_defconfig @@ -4,3 +4,8 @@ CONFIG_TEGRA30=y CONFIG_TARGET_CARDHU=y CONFIG_DEFAULT_DEVICE_TREE="tegra30-cardhu" CONFIG_CMD_NET=y +CONFIG_SPL_DM=y +CONFIG_SPI_FLASH=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/chromebook_link_defconfig b/configs/chromebook_link_defconfig index 4f7f779..da1d489 100644 --- a/configs/chromebook_link_defconfig +++ b/configs/chromebook_link_defconfig @@ -3,9 +3,15 @@ CONFIG_VENDOR_GOOGLE=y CONFIG_DEFAULT_DEVICE_TREE="chromebook_link" CONFIG_TARGET_CHROMEBOOK_LINK=y CONFIG_HAVE_MRC=y -CONFIG_FRAMEBUFFER_SET_VESA_MODE=y -CONFIG_FRAMEBUFFER_VESA_MODE_11A=y CONFIG_CMD_NET=y +CONFIG_BOOTSTAGE=y +CONFIG_BOOTSTAGE_REPORT=y +CONFIG_CMD_BOOTSTAGE=y CONFIG_OF_CONTROL=y CONFIG_DM_PCI=y +CONFIG_SPI_FLASH=y CONFIG_VIDEO_VESA=y +CONFIG_FRAMEBUFFER_SET_VESA_MODE=y +CONFIG_FRAMEBUFFER_VESA_MODE_11A=y +CONFIG_USE_PRIVATE_LIBGCC=y +CONFIG_SYS_VSNPRINTF=y diff --git a/configs/chromebox_panther_defconfig b/configs/chromebox_panther_defconfig index 941033f..876e7d8 100644 --- a/configs/chromebox_panther_defconfig +++ b/configs/chromebox_panther_defconfig @@ -3,9 +3,15 @@ CONFIG_VENDOR_GOOGLE=y CONFIG_DEFAULT_DEVICE_TREE="chromebox_panther" CONFIG_TARGET_CHROMEBOX_PANTHER=y CONFIG_HAVE_MRC=y -CONFIG_FRAMEBUFFER_SET_VESA_MODE=y -CONFIG_FRAMEBUFFER_VESA_MODE_11A=y CONFIG_CMD_NET=y +CONFIG_BOOTSTAGE=y +CONFIG_BOOTSTAGE_REPORT=y +CONFIG_CMD_BOOTSTAGE=y CONFIG_OF_CONTROL=y CONFIG_DM_PCI=y +CONFIG_SPI_FLASH=y CONFIG_VIDEO_VESA=y +CONFIG_FRAMEBUFFER_SET_VESA_MODE=y +CONFIG_FRAMEBUFFER_VESA_MODE_11A=y +CONFIG_USE_PRIVATE_LIBGCC=y +CONFIG_SYS_VSNPRINTF=y diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig index 4db785d..d0e8e04 100644 --- a/configs/cm_fx6_defconfig +++ b/configs/cm_fx6_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_CM_FX6=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL,SPL" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/colibri_t20_defconfig b/configs/colibri_t20_defconfig index 292eccb..e1505c0 100644 --- a/configs/colibri_t20_defconfig +++ b/configs/colibri_t20_defconfig @@ -5,3 +5,7 @@ CONFIG_TARGET_COLIBRI_T20=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-colibri" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPL_DM=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/colibri_t30_defconfig b/configs/colibri_t30_defconfig index 54d73a2..e2fda6e 100644 --- a/configs/colibri_t30_defconfig +++ b/configs/colibri_t30_defconfig @@ -5,3 +5,7 @@ CONFIG_TARGET_COLIBRI_T30=y CONFIG_DEFAULT_DEVICE_TREE="tegra30-colibri" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPL_DM=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig index 5d4f307..e4c2f73 100644 --- a/configs/colibri_vf_defconfig +++ b/configs/colibri_vf_defconfig @@ -2,6 +2,6 @@ CONFIG_ARM=y CONFIG_TARGET_COLIBRI_VF=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,ENV_IS_IN_NAND,IMX_NAND" CONFIG_CMD_NET=y +CONFIG_DM=y CONFIG_NAND_VF610_NFC=y CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y -CONFIG_DM=y diff --git a/configs/colibri_vf_dtb_defconfig b/configs/colibri_vf_dtb_defconfig index d4c8c58..5d1ea65 100644 --- a/configs/colibri_vf_dtb_defconfig +++ b/configs/colibri_vf_dtb_defconfig @@ -1,8 +1,8 @@ CONFIG_ARM=y CONFIG_TARGET_COLIBRI_VF=y +CONFIG_DEFAULT_DEVICE_TREE="vf610-colibri" CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,ENV_IS_IN_NAND,IMX_NAND" +CONFIG_OF_CONTROL=y +CONFIG_DM=y CONFIG_NAND_VF610_NFC=y CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y -CONFIG_DM=y -CONFIG_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="vf610-colibri" diff --git a/configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig b/configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig index 63b24c0..cc2fd83 100644 --- a/configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig +++ b/configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_CONTROLCENTERD=y CONFIG_SYS_EXTRA_OPTIONS="36BIT,SDCARD,DEVELOP" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/controlcenterd_36BIT_SDCARD_defconfig b/configs/controlcenterd_36BIT_SDCARD_defconfig index ef64586..60d4bf5 100644 --- a/configs/controlcenterd_36BIT_SDCARD_defconfig +++ b/configs/controlcenterd_36BIT_SDCARD_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_CONTROLCENTERD=y CONFIG_SYS_EXTRA_OPTIONS="36BIT,SDCARD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/coreboot-x86_defconfig b/configs/coreboot-x86_defconfig index 97ac1fa..cc397a8 100644 --- a/configs/coreboot-x86_defconfig +++ b/configs/coreboot-x86_defconfig @@ -1,7 +1,13 @@ CONFIG_X86=y CONFIG_VENDOR_COREBOOT=y CONFIG_TARGET_COREBOOT=y +CONFIG_TSC_CALIBRATION_BYPASS=y CONFIG_CMD_NET=y +CONFIG_BOOTSTAGE=y +CONFIG_BOOTSTAGE_REPORT=y +CONFIG_CMD_BOOTSTAGE=y CONFIG_OF_CONTROL=y CONFIG_DM_PCI=y -CONFIG_TSC_CALIBRATION_BYPASS=y +CONFIG_SPI_FLASH=y +CONFIG_USE_PRIVATE_LIBGCC=y +CONFIG_SYS_VSNPRINTF=y diff --git a/configs/cpuat91_defconfig b/configs/cpuat91_defconfig index 676e1a5..386912a 100644 --- a/configs/cpuat91_defconfig +++ b/configs/cpuat91_defconfig @@ -1,8 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_CPUAT91=y -CONFIG_CMD_NET=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_NET=y diff --git a/configs/cpuat91_ram_defconfig b/configs/cpuat91_ram_defconfig index 95e88c4..8095aee 100644 --- a/configs/cpuat91_ram_defconfig +++ b/configs/cpuat91_ram_defconfig @@ -1,9 +1,9 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_CPUAT91=y -CONFIG_CMD_NET=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT" CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_NET=y diff --git a/configs/crownbay_defconfig b/configs/crownbay_defconfig index d3a370d..c6f9449 100644 --- a/configs/crownbay_defconfig +++ b/configs/crownbay_defconfig @@ -4,4 +4,10 @@ CONFIG_DEFAULT_DEVICE_TREE="crownbay" CONFIG_TARGET_CROWNBAY=y CONFIG_GENERATE_PIRQ_TABLE=y CONFIG_CMD_NET=y +CONFIG_BOOTSTAGE=y +CONFIG_BOOTSTAGE_REPORT=y +CONFIG_CMD_BOOTSTAGE=y CONFIG_OF_CONTROL=y +CONFIG_SPI_FLASH=y +CONFIG_USE_PRIVATE_LIBGCC=y +CONFIG_SYS_VSNPRINTF=y diff --git a/configs/d2net_v2_defconfig b/configs/d2net_v2_defconfig index a28032e..4a9053e 100644 --- a/configs/d2net_v2_defconfig +++ b/configs/d2net_v2_defconfig @@ -3,3 +3,4 @@ CONFIG_KIRKWOOD=y CONFIG_TARGET_NET2BIG_V2=y CONFIG_SYS_EXTRA_OPTIONS="D2NET_V2" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/da830evm_defconfig b/configs/da830evm_defconfig index 846b75c..0d91d7a 100644 --- a/configs/da830evm_defconfig +++ b/configs/da830evm_defconfig @@ -2,3 +2,4 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_DA830EVM=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/da850_am18xxevm_defconfig b/configs/da850_am18xxevm_defconfig index b3def20..09ccaf2 100644 --- a/configs/da850_am18xxevm_defconfig +++ b/configs/da850_am18xxevm_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_DA850EVM=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="DA850_AM18X_EVM,MAC_ADDR_IN_EEPROM,SYS_I2C_EEPROM_ADDR_LEN=2,SYS_I2C_EEPROM_ADDR=0x50" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig index e012763..40a0395 100644 --- a/configs/da850evm_defconfig +++ b/configs/da850evm_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_DA850EVM=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/da850evm_direct_nor_defconfig b/configs/da850evm_direct_nor_defconfig index 22afff5..9a32c20 100644 --- a/configs/da850evm_direct_nor_defconfig +++ b/configs/da850evm_direct_nor_defconfig @@ -3,3 +3,4 @@ CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_DA850EVM=y CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH,USE_NOR,DIRECT_NOR_BOOT" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/dalmore_defconfig b/configs/dalmore_defconfig index 67b8c9a..532e2b1 100644 --- a/configs/dalmore_defconfig +++ b/configs/dalmore_defconfig @@ -4,3 +4,8 @@ CONFIG_TEGRA114=y CONFIG_TARGET_DALMORE=y CONFIG_DEFAULT_DEVICE_TREE="tegra114-dalmore" CONFIG_CMD_NET=y +CONFIG_SPL_DM=y +CONFIG_SPI_FLASH=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/db-88f6820-gp_defconfig b/configs/db-88f6820-gp_defconfig index 5f53522..7726314 100644 --- a/configs/db-88f6820-gp_defconfig +++ b/configs/db-88f6820-gp_defconfig @@ -1,3 +1,4 @@ CONFIG_ARM=y CONFIG_TARGET_DB_88F6820_GP=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/db-mv784mp-gp_defconfig b/configs/db-mv784mp-gp_defconfig index 637694b..6ce5cff 100644 --- a/configs/db-mv784mp-gp_defconfig +++ b/configs/db-mv784mp-gp_defconfig @@ -2,3 +2,4 @@ CONFIG_ARM=y CONFIG_TARGET_DB_MV784MP_GP=y CONFIG_SPL=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/dbau1000_defconfig b/configs/dbau1000_defconfig index fb6c4af..65d7c4b 100644 --- a/configs/dbau1000_defconfig +++ b/configs/dbau1000_defconfig @@ -2,3 +2,4 @@ CONFIG_MIPS=y CONFIG_TARGET_DBAU1X00=y CONFIG_SYS_EXTRA_OPTIONS="DBAU1000" CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/dbau1100_defconfig b/configs/dbau1100_defconfig index cda1332..a60096f 100644 --- a/configs/dbau1100_defconfig +++ b/configs/dbau1100_defconfig @@ -2,3 +2,4 @@ CONFIG_MIPS=y CONFIG_TARGET_DBAU1X00=y CONFIG_DBAU1100=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/dbau1500_defconfig b/configs/dbau1500_defconfig index f6f2202..73a0116 100644 --- a/configs/dbau1500_defconfig +++ b/configs/dbau1500_defconfig @@ -2,3 +2,4 @@ CONFIG_MIPS=y CONFIG_TARGET_DBAU1X00=y CONFIG_DBAU1500=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/dbau1550_defconfig b/configs/dbau1550_defconfig index 85875a9..864eaa8 100644 --- a/configs/dbau1550_defconfig +++ b/configs/dbau1550_defconfig @@ -2,3 +2,4 @@ CONFIG_MIPS=y CONFIG_TARGET_DBAU1X00=y CONFIG_DBAU1550=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/dbau1550_el_defconfig b/configs/dbau1550_el_defconfig index 5b22978..07dd6b3 100644 --- a/configs/dbau1550_el_defconfig +++ b/configs/dbau1550_el_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_DBAU1X00=y CONFIG_DBAU1550=y CONFIG_SYS_LITTLE_ENDIAN=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/digsy_mtc_RAMBOOT_defconfig b/configs/digsy_mtc_RAMBOOT_defconfig index 311ac8e..85c5ed9 100644 --- a/configs/digsy_mtc_RAMBOOT_defconfig +++ b/configs/digsy_mtc_RAMBOOT_defconfig @@ -1,5 +1,4 @@ CONFIG_PPC=y -CONFIG_CMD_NET=y CONFIG_MPC5xxx=y CONFIG_TARGET_DIGSY_MTC=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x00100000" @@ -7,3 +6,4 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_NET=y diff --git a/configs/digsy_mtc_defconfig b/configs/digsy_mtc_defconfig index f4f0a6d..d1bc949 100644 --- a/configs/digsy_mtc_defconfig +++ b/configs/digsy_mtc_defconfig @@ -1,7 +1,7 @@ CONFIG_PPC=y -CONFIG_CMD_NET=y CONFIG_MPC5xxx=y CONFIG_TARGET_DIGSY_MTC=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR=" " +CONFIG_CMD_NET=y diff --git a/configs/digsy_mtc_rev5_RAMBOOT_defconfig b/configs/digsy_mtc_rev5_RAMBOOT_defconfig index 554f907..63624f5 100644 --- a/configs/digsy_mtc_rev5_RAMBOOT_defconfig +++ b/configs/digsy_mtc_rev5_RAMBOOT_defconfig @@ -1,5 +1,4 @@ CONFIG_PPC=y -CONFIG_CMD_NET=y CONFIG_MPC5xxx=y CONFIG_TARGET_DIGSY_MTC=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x00100000,DIGSY_REV5" @@ -7,3 +6,4 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_NET=y diff --git a/configs/digsy_mtc_rev5_defconfig b/configs/digsy_mtc_rev5_defconfig index 83b8ac2..f015603 100644 --- a/configs/digsy_mtc_rev5_defconfig +++ b/configs/digsy_mtc_rev5_defconfig @@ -1,5 +1,4 @@ CONFIG_PPC=y -CONFIG_CMD_NET=y CONFIG_MPC5xxx=y CONFIG_TARGET_DIGSY_MTC=y CONFIG_SYS_EXTRA_OPTIONS="DIGSY_REV5" @@ -7,3 +6,4 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_NET=y diff --git a/configs/dlvision-10g_defconfig b/configs/dlvision-10g_defconfig index 3687111..b58fb55 100644 --- a/configs/dlvision-10g_defconfig +++ b/configs/dlvision-10g_defconfig @@ -1,7 +1,7 @@ CONFIG_PPC=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_4xx=y CONFIG_TARGET_DLVISION_10G=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig index 682a6cc..8a78014 100644 --- a/configs/dra7xx_evm_defconfig +++ b/configs/dra7xx_evm_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_DRA7XX_EVM=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/dra7xx_evm_qspiboot_defconfig b/configs/dra7xx_evm_qspiboot_defconfig index 86dad88..4cc5f05 100644 --- a/configs/dra7xx_evm_qspiboot_defconfig +++ b/configs/dra7xx_evm_qspiboot_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_DRA7XX_EVM=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1,QSPI_BOOT" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/dra7xx_evm_uart3_defconfig b/configs/dra7xx_evm_uart3_defconfig index c4bd587..c564b32 100644 --- a/configs/dra7xx_evm_uart3_defconfig +++ b/configs/dra7xx_evm_uart3_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_DRA7XX_EVM=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=3,SPL_YMODEM_SUPPORT" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/draco_defconfig b/configs/draco_defconfig index 80cb44b..3d09367 100644 --- a/configs/draco_defconfig +++ b/configs/draco_defconfig @@ -1,7 +1,8 @@ CONFIG_ARM=y CONFIG_TARGET_DRACO=y -CONFIG_CMD_NET=y CONFIG_SPL=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" +CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/dreamplug_defconfig b/configs/dreamplug_defconfig index 0d0dfe9..2a3307c 100644 --- a/configs/dreamplug_defconfig +++ b/configs/dreamplug_defconfig @@ -2,3 +2,4 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_DREAMPLUG=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/ea20_defconfig b/configs/ea20_defconfig index 87c64fd..bed22c0 100644 --- a/configs/ea20_defconfig +++ b/configs/ea20_defconfig @@ -2,3 +2,4 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_EA20=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/ecovec_defconfig b/configs/ecovec_defconfig index 5e11e44..4cdf8a3 100644 --- a/configs/ecovec_defconfig +++ b/configs/ecovec_defconfig @@ -1,3 +1,4 @@ CONFIG_SH=y CONFIG_TARGET_ECOVEC=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/espt_defconfig b/configs/espt_defconfig index 150936e..95bfe9a 100644 --- a/configs/espt_defconfig +++ b/configs/espt_defconfig @@ -1,3 +1,4 @@ CONFIG_SH=y CONFIG_TARGET_ESPT=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/ethernut5_defconfig b/configs/ethernut5_defconfig index 8f18999..dddc7d7 100644 --- a/configs/ethernut5_defconfig +++ b/configs/ethernut5_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_ETHERNUT5=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/forfun_q88db_defconfig b/configs/forfun_q88db_defconfig index fc7ce6a..697de9c 100644 --- a/configs/forfun_q88db_defconfig +++ b/configs/forfun_q88db_defconfig @@ -11,5 +11,11 @@ CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-forfun-q88db" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig index 67b40c2..25f4199 100644 --- a/configs/ga10h_v1_1_defconfig +++ b/configs/ga10h_v1_1_defconfig @@ -15,7 +15,13 @@ CONFIG_VIDEO_LCD_BL_PWM="PH0" CONFIG_VIDEO_LCD_PANEL_LVDS=y CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ga10h-v1.1" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3000 diff --git a/configs/galileo_defconfig b/configs/galileo_defconfig index 5045510..f01103d 100644 --- a/configs/galileo_defconfig +++ b/configs/galileo_defconfig @@ -1,10 +1,16 @@ CONFIG_X86=y -CONFIG_NETDEVICES=y CONFIG_VENDOR_INTEL=y CONFIG_DEFAULT_DEVICE_TREE="galileo" CONFIG_TARGET_GALILEO=y +CONFIG_GENERATE_PIRQ_TABLE=y CONFIG_CMD_NET=y +CONFIG_BOOTSTAGE=y +CONFIG_BOOTSTAGE_REPORT=y +CONFIG_CMD_BOOTSTAGE=y CONFIG_OF_CONTROL=y CONFIG_SPL_DISABLE_OF_CONTROL=y +CONFIG_SPI_FLASH=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y -CONFIG_GENERATE_PIRQ_TABLE=y +CONFIG_USE_PRIVATE_LIBGCC=y +CONFIG_SYS_VSNPRINTF=y diff --git a/configs/gdppc440etx_defconfig b/configs/gdppc440etx_defconfig index 9fe229e..81ad845 100644 --- a/configs/gdppc440etx_defconfig +++ b/configs/gdppc440etx_defconfig @@ -1,7 +1,7 @@ CONFIG_PPC=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_4xx=y CONFIG_TARGET_GDPPC440ETX=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y diff --git a/configs/gose_defconfig b/configs/gose_defconfig index 6d0c3ae..76b81dc 100644 --- a/configs/gose_defconfig +++ b/configs/gose_defconfig @@ -2,4 +2,5 @@ CONFIG_ARM=y CONFIG_RMOBILE=y CONFIG_TARGET_GOSE=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y CONFIG_SH_SDHI=y diff --git a/configs/gplugd_defconfig b/configs/gplugd_defconfig index a92b4e4..7e367a8 100644 --- a/configs/gplugd_defconfig +++ b/configs/gplugd_defconfig @@ -1,3 +1,4 @@ CONFIG_ARM=y CONFIG_TARGET_GPLUGD=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/grasshopper_defconfig b/configs/grasshopper_defconfig index 85b5f43..97f2915 100644 --- a/configs/grasshopper_defconfig +++ b/configs/grasshopper_defconfig @@ -1,7 +1,7 @@ CONFIG_AVR32=y -CONFIG_CMD_NET=y CONFIG_TARGET_GRASSHOPPER=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_NET=y diff --git a/configs/gwventana_defconfig b/configs/gwventana_defconfig index 5cfe983..dfb24b0 100644 --- a/configs/gwventana_defconfig +++ b/configs/gwventana_defconfig @@ -1,9 +1,10 @@ CONFIG_ARM=y CONFIG_TARGET_GW_VENTANA=y -CONFIG_SYS_MALLOC_F=y CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_ADDR=0x18000000 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_DM=y +CONFIG_DM_SERIAL=y diff --git a/configs/harmony_defconfig b/configs/harmony_defconfig index aa556a1..74656cc 100644 --- a/configs/harmony_defconfig +++ b/configs/harmony_defconfig @@ -4,3 +4,7 @@ CONFIG_TEGRA20=y CONFIG_TARGET_HARMONY=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-harmony" CONFIG_CMD_NET=y +CONFIG_SPL_DM=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/highbank_defconfig b/configs/highbank_defconfig index ed3b7e4..ae74ba1 100644 --- a/configs/highbank_defconfig +++ b/configs/highbank_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_HIGHBANK=y -CONFIG_CMD_NET=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds...\nPress to stop or to delay\n" CONFIG_AUTOBOOT_KEYED_CTRLC=y +CONFIG_CMD_NET=y diff --git a/configs/hrcon_defconfig b/configs/hrcon_defconfig index 7707243..cf2cdc8 100644 --- a/configs/hrcon_defconfig +++ b/configs/hrcon_defconfig @@ -1,6 +1,6 @@ CONFIG_PPC=y -CONFIG_CMD_NET=y CONFIG_MPC83xx=y CONFIG_TARGET_HRCON=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_NET=y diff --git a/configs/i12-tvbox_defconfig b/configs/i12-tvbox_defconfig index c8ccf45..371251c 100644 --- a/configs/i12-tvbox_defconfig +++ b/configs/i12-tvbox_defconfig @@ -3,6 +3,14 @@ CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-i12-tvbox" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/iNet_3F_defconfig b/configs/iNet_3F_defconfig index e807aeb..cc5db7e 100644 --- a/configs/iNet_3F_defconfig +++ b/configs/iNet_3F_defconfig @@ -13,5 +13,11 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_VIDEO_LCD_PANEL_LVDS=y CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet-3f" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y diff --git a/configs/iNet_3W_defconfig b/configs/iNet_3W_defconfig index eaf7c5a..fc64fb1 100644 --- a/configs/iNet_3W_defconfig +++ b/configs/iNet_3W_defconfig @@ -13,5 +13,11 @@ CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet-3w" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y diff --git a/configs/iNet_86VS_defconfig b/configs/iNet_86VS_defconfig index 017a87a..edf6e8b 100644 --- a/configs/iNet_86VS_defconfig +++ b/configs/iNet_86VS_defconfig @@ -11,5 +11,11 @@ CONFIG_VIDEO_LCD_BL_EN="AXP0-1" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-inet-86vs" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y diff --git a/configs/ids8313_defconfig b/configs/ids8313_defconfig index cb795fc..9cb4d31 100644 --- a/configs/ids8313_defconfig +++ b/configs/ids8313_defconfig @@ -1,5 +1,4 @@ CONFIG_PPC=y -CONFIG_CMD_NET=y CONFIG_MPC83xx=y CONFIG_TARGET_IDS8313=y CONFIG_FIT=y @@ -8,3 +7,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xFFF00000" CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Enter password - autoboot in %d seconds...\n" CONFIG_AUTOBOOT_DELAY_STR="ids" +CONFIG_CMD_NET=y diff --git a/configs/ima3-mx53_defconfig b/configs/ima3-mx53_defconfig index 3190b71..c5679dd 100644 --- a/configs/ima3-mx53_defconfig +++ b/configs/ima3-mx53_defconfig @@ -2,3 +2,4 @@ CONFIG_ARM=y CONFIG_TARGET_IMA3_MX53=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/esg/ima3-mx53/imximage.cfg" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/inetspace_v2_defconfig b/configs/inetspace_v2_defconfig index 35aabc8..716111b 100644 --- a/configs/inetspace_v2_defconfig +++ b/configs/inetspace_v2_defconfig @@ -3,3 +3,4 @@ CONFIG_KIRKWOOD=y CONFIG_TARGET_NETSPACE_V2=y CONFIG_SYS_EXTRA_OPTIONS="INETSPACE_V2" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/intip_defconfig b/configs/intip_defconfig index 82ed775..06d983d 100644 --- a/configs/intip_defconfig +++ b/configs/intip_defconfig @@ -1,8 +1,8 @@ CONFIG_PPC=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_4xx=y CONFIG_TARGET_INTIP=y CONFIG_SYS_EXTRA_OPTIONS="INTIB" CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y diff --git a/configs/io64_defconfig b/configs/io64_defconfig index 3276cc4..604cd7e 100644 --- a/configs/io64_defconfig +++ b/configs/io64_defconfig @@ -1,7 +1,7 @@ CONFIG_PPC=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_4xx=y CONFIG_TARGET_IO64=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y diff --git a/configs/io_defconfig b/configs/io_defconfig index ad3a651..9e0afee 100644 --- a/configs/io_defconfig +++ b/configs/io_defconfig @@ -1,7 +1,7 @@ CONFIG_PPC=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_4xx=y CONFIG_TARGET_IO=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y diff --git a/configs/iocon_defconfig b/configs/iocon_defconfig index f966dea..e92056e 100644 --- a/configs/iocon_defconfig +++ b/configs/iocon_defconfig @@ -1,7 +1,7 @@ CONFIG_PPC=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_4xx=y CONFIG_TARGET_IOCON=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y diff --git a/configs/ip04_defconfig b/configs/ip04_defconfig index 22bb8b8..53e7dec 100644 --- a/configs/ip04_defconfig +++ b/configs/ip04_defconfig @@ -2,4 +2,5 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_IP04=y CONFIG_CMD_NET=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/jesurun_q5_defconfig b/configs/jesurun_q5_defconfig index da41bff..8c17fac 100644 --- a/configs/jesurun_q5_defconfig +++ b/configs/jesurun_q5_defconfig @@ -3,5 +3,13 @@ CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=312 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-jesurun-q5" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI,MACPWR=SUNXI_GPH(19)" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/jetson-tk1_defconfig b/configs/jetson-tk1_defconfig index dc68c6d..d7af52d 100644 --- a/configs/jetson-tk1_defconfig +++ b/configs/jetson-tk1_defconfig @@ -4,3 +4,8 @@ CONFIG_TEGRA124=y CONFIG_TARGET_JETSON_TK1=y CONFIG_DEFAULT_DEVICE_TREE="tegra124-jetson-tk1" CONFIG_CMD_NET=y +CONFIG_SPL_DM=y +CONFIG_SPI_FLASH=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/k2e_evm_defconfig b/configs/k2e_evm_defconfig index 8dc8d69..ac72e71 100644 --- a/configs/k2e_evm_defconfig +++ b/configs/k2e_evm_defconfig @@ -3,3 +3,4 @@ CONFIG_ARCH_KEYSTONE=y CONFIG_TARGET_K2E_EVM=y CONFIG_SPL=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/k2hk_evm_defconfig b/configs/k2hk_evm_defconfig index 0976598..53e7db8 100644 --- a/configs/k2hk_evm_defconfig +++ b/configs/k2hk_evm_defconfig @@ -3,3 +3,4 @@ CONFIG_ARCH_KEYSTONE=y CONFIG_TARGET_K2HK_EVM=y CONFIG_SPL=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/k2l_evm_defconfig b/configs/k2l_evm_defconfig index 45c600b..ef688dd 100644 --- a/configs/k2l_evm_defconfig +++ b/configs/k2l_evm_defconfig @@ -3,3 +3,4 @@ CONFIG_ARCH_KEYSTONE=y CONFIG_TARGET_K2L_EVM=y CONFIG_SPL=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/km_kirkwood_128m16_defconfig b/configs/km_kirkwood_128m16_defconfig index 9768d5a..25cd351 100644 --- a/configs/km_kirkwood_128m16_defconfig +++ b/configs/km_kirkwood_128m16_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_KM_KIRKWOOD=y CONFIG_SYS_EXTRA_OPTIONS="KM_KIRKWOOD_128M16" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/km_kirkwood_defconfig b/configs/km_kirkwood_defconfig index 5f93285..0a5c545 100644 --- a/configs/km_kirkwood_defconfig +++ b/configs/km_kirkwood_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_KM_KIRKWOOD=y CONFIG_SYS_EXTRA_OPTIONS="KM_KIRKWOOD" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/km_kirkwood_pci_defconfig b/configs/km_kirkwood_pci_defconfig index 82b02ae..81b45ad 100644 --- a/configs/km_kirkwood_pci_defconfig +++ b/configs/km_kirkwood_pci_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_KM_KIRKWOOD=y CONFIG_SYS_EXTRA_OPTIONS="KM_KIRKWOOD_PCI" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/kmcoge4_defconfig b/configs/kmcoge4_defconfig index bcc2cc8..4877a2d 100644 --- a/configs/kmcoge4_defconfig +++ b/configs/kmcoge4_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_KMP204X=y CONFIG_SYS_EXTRA_OPTIONS="KMCOGE4" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/kmcoge5un_defconfig b/configs/kmcoge5un_defconfig index 3484e8a..610dac8 100644 --- a/configs/kmcoge5un_defconfig +++ b/configs/kmcoge5un_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_KM_KIRKWOOD=y CONFIG_SYS_EXTRA_OPTIONS="KM_COGE5UN" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/kmlion1_defconfig b/configs/kmlion1_defconfig index 6fa48a0..e230ad5 100644 --- a/configs/kmlion1_defconfig +++ b/configs/kmlion1_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_KMP204X=y CONFIG_SYS_EXTRA_OPTIONS="KMLION1" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/kmnusa_defconfig b/configs/kmnusa_defconfig index e40aa3f..bf4a5ea 100644 --- a/configs/kmnusa_defconfig +++ b/configs/kmnusa_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_KM_KIRKWOOD=y CONFIG_SYS_EXTRA_OPTIONS="KM_NUSA" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/kmsugp1_defconfig b/configs/kmsugp1_defconfig index a9d23a2..ff20e9d 100644 --- a/configs/kmsugp1_defconfig +++ b/configs/kmsugp1_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_KM_KIRKWOOD=y CONFIG_SYS_EXTRA_OPTIONS="KM_SUGP1" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/kmsuv31_defconfig b/configs/kmsuv31_defconfig index 68b5178..7701e63 100644 --- a/configs/kmsuv31_defconfig +++ b/configs/kmsuv31_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_KM_KIRKWOOD=y CONFIG_SYS_EXTRA_OPTIONS="KM_SUV31" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/koelsch_defconfig b/configs/koelsch_defconfig index 6be722c..40dea22 100644 --- a/configs/koelsch_defconfig +++ b/configs/koelsch_defconfig @@ -2,4 +2,5 @@ CONFIG_ARM=y CONFIG_RMOBILE=y CONFIG_TARGET_KOELSCH=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y CONFIG_SH_SDHI=y diff --git a/configs/lager_defconfig b/configs/lager_defconfig index 6b4184c..1ee1070 100644 --- a/configs/lager_defconfig +++ b/configs/lager_defconfig @@ -2,4 +2,5 @@ CONFIG_ARM=y CONFIG_RMOBILE=y CONFIG_TARGET_LAGER=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y CONFIG_SH_SDHI=y diff --git a/configs/ls1021aqds_qspi_defconfig b/configs/ls1021aqds_qspi_defconfig index c5372b7..3cadd7c 100644 --- a/configs/ls1021aqds_qspi_defconfig +++ b/configs/ls1021aqds_qspi_defconfig @@ -2,3 +2,4 @@ CONFIG_ARM=y CONFIG_TARGET_LS1021AQDS=y CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/ls1021atwr_qspi_defconfig b/configs/ls1021atwr_qspi_defconfig index 1ae0f9c..a3e9e66 100644 --- a/configs/ls1021atwr_qspi_defconfig +++ b/configs/ls1021atwr_qspi_defconfig @@ -2,3 +2,4 @@ CONFIG_ARM=y CONFIG_TARGET_LS1021ATWR=y CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/lschlv2_defconfig b/configs/lschlv2_defconfig index 636040a..8cd8282 100644 --- a/configs/lschlv2_defconfig +++ b/configs/lschlv2_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_LSXL=y CONFIG_SYS_EXTRA_OPTIONS="LSCHLV2" CONFIG_CMD_NET=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPI_FLASH=y diff --git a/configs/lsxhl_defconfig b/configs/lsxhl_defconfig index 125fbaf..8847109 100644 --- a/configs/lsxhl_defconfig +++ b/configs/lsxhl_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_LSXL=y CONFIG_SYS_EXTRA_OPTIONS="LSXHL" CONFIG_CMD_NET=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPI_FLASH=y diff --git a/configs/m28evk_defconfig b/configs/m28evk_defconfig index 28af941..fb681af 100644 --- a/configs/m28evk_defconfig +++ b/configs/m28evk_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_M28EVK=y CONFIG_SPL=y CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/malta_defconfig b/configs/malta_defconfig index 29fd977..4f0c483 100644 --- a/configs/malta_defconfig +++ b/configs/malta_defconfig @@ -1,3 +1,4 @@ CONFIG_MIPS=y CONFIG_TARGET_MALTA=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/maltael_defconfig b/configs/maltael_defconfig index 2935860..ac835f8 100644 --- a/configs/maltael_defconfig +++ b/configs/maltael_defconfig @@ -2,3 +2,4 @@ CONFIG_MIPS=y CONFIG_TARGET_MALTA=y CONFIG_SYS_LITTLE_ENDIAN=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/marsboard_defconfig b/configs/marsboard_defconfig index cfe6e8e..48df76b 100644 --- a/configs/marsboard_defconfig +++ b/configs/marsboard_defconfig @@ -4,4 +4,5 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y CONFIG_DM=y +CONFIG_SPI_FLASH=y CONFIG_DM_THERMAL=y diff --git a/configs/maxbcm_defconfig b/configs/maxbcm_defconfig index 23af99b..b60faa1 100644 --- a/configs/maxbcm_defconfig +++ b/configs/maxbcm_defconfig @@ -2,3 +2,4 @@ CONFIG_ARM=y CONFIG_TARGET_MAXBCM=y CONFIG_SPL=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/medcom-wide_defconfig b/configs/medcom-wide_defconfig index 664b075..a785980 100644 --- a/configs/medcom-wide_defconfig +++ b/configs/medcom-wide_defconfig @@ -4,3 +4,7 @@ CONFIG_TEGRA20=y CONFIG_TARGET_MEDCOM_WIDE=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-medcom-wide" CONFIG_CMD_NET=y +CONFIG_SPL_DM=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/mgcoge3un_defconfig b/configs/mgcoge3un_defconfig index 9468b41..7b5fb93 100644 --- a/configs/mgcoge3un_defconfig +++ b/configs/mgcoge3un_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_KM_KIRKWOOD=y CONFIG_SYS_EXTRA_OPTIONS="KM_MGCOGE3UN" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/minnowmax_defconfig b/configs/minnowmax_defconfig index 744aca3..c5c1f38 100644 --- a/configs/minnowmax_defconfig +++ b/configs/minnowmax_defconfig @@ -3,12 +3,18 @@ CONFIG_VENDOR_INTEL=y CONFIG_DEFAULT_DEVICE_TREE="minnowmax" CONFIG_TARGET_MINNOWMAX=y CONFIG_HAVE_INTEL_ME=y -CONFIG_VIDEO_VESA=y -CONFIG_FRAMEBUFFER_SET_VESA_MODE=y -CONFIG_FRAMEBUFFER_VESA_MODE_11A=y CONFIG_SMP=y CONFIG_GENERATE_SFI_TABLE=y CONFIG_CMD_CPU=y CONFIG_CMD_NET=y +CONFIG_BOOTSTAGE=y +CONFIG_BOOTSTAGE_REPORT=y +CONFIG_CMD_BOOTSTAGE=y CONFIG_OF_CONTROL=y CONFIG_CPU=y +CONFIG_SPI_FLASH=y +CONFIG_VIDEO_VESA=y +CONFIG_FRAMEBUFFER_SET_VESA_MODE=y +CONFIG_FRAMEBUFFER_VESA_MODE_11A=y +CONFIG_USE_PRIVATE_LIBGCC=y +CONFIG_SYS_VSNPRINTF=y diff --git a/configs/mixtile_loftq_defconfig b/configs/mixtile_loftq_defconfig index 5c60634..f940bf1 100644 --- a/configs/mixtile_loftq_defconfig +++ b/configs/mixtile_loftq_defconfig @@ -6,7 +6,15 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB1_VBUS_PIN="PH24" CONFIG_USB2_VBUS_PIN="" CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mixtile-loftq" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_SERIAL=y CONFIG_AXP221_ALDO1_VOLT=3300 +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/mk802_a10s_defconfig b/configs/mk802_a10s_defconfig index 4994936..36ad5bb 100644 --- a/configs/mk802_a10s_defconfig +++ b/configs/mk802_a10s_defconfig @@ -5,5 +5,13 @@ CONFIG_DRAM_CLK=432 CONFIG_DRAM_EMR1=0 CONFIG_USB1_VBUS_PIN="PB10" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-mk802" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/mk802_defconfig b/configs/mk802_defconfig index 1a9a361..a4f1b0b 100644 --- a/configs/mk802_defconfig +++ b/configs/mk802_defconfig @@ -3,5 +3,13 @@ CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN4I=y CONFIG_USB2_VBUS_PIN="PH12" CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/mk802ii_defconfig b/configs/mk802ii_defconfig index 3850fba..641aa55 100644 --- a/configs/mk802ii_defconfig +++ b/configs/mk802ii_defconfig @@ -2,5 +2,13 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN4I=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802ii" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/motionpro_defconfig b/configs/motionpro_defconfig index eaa222e..61ffee9 100644 --- a/configs/motionpro_defconfig +++ b/configs/motionpro_defconfig @@ -1,7 +1,7 @@ CONFIG_PPC=y -CONFIG_CMD_NET=y CONFIG_MPC5xxx=y CONFIG_TARGET_MOTIONPRO=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" +CONFIG_CMD_NET=y diff --git a/configs/mpr2_defconfig b/configs/mpr2_defconfig index c8be987..f242419 100644 --- a/configs/mpr2_defconfig +++ b/configs/mpr2_defconfig @@ -1,2 +1,3 @@ CONFIG_SH=y CONFIG_TARGET_MPR2=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/ms7720se_defconfig b/configs/ms7720se_defconfig index 0e3f834..58bc947 100644 --- a/configs/ms7720se_defconfig +++ b/configs/ms7720se_defconfig @@ -1,2 +1,3 @@ CONFIG_SH=y CONFIG_TARGET_MS7720SE=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/ms7722se_defconfig b/configs/ms7722se_defconfig index 552f449..59ea708 100644 --- a/configs/ms7722se_defconfig +++ b/configs/ms7722se_defconfig @@ -1,3 +1,4 @@ CONFIG_SH=y CONFIG_TARGET_MS7722SE=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/ms7750se_defconfig b/configs/ms7750se_defconfig index c23e4c9..0a805b5 100644 --- a/configs/ms7750se_defconfig +++ b/configs/ms7750se_defconfig @@ -1,2 +1,3 @@ CONFIG_SH=y CONFIG_TARGET_MS7750SE=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/mv88f6281gtw_ge_defconfig b/configs/mv88f6281gtw_ge_defconfig index be9e3a0..41e8931 100644 --- a/configs/mv88f6281gtw_ge_defconfig +++ b/configs/mv88f6281gtw_ge_defconfig @@ -2,3 +2,4 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_MV88F6281GTW_GE=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/mx28evk_auart_console_defconfig b/configs/mx28evk_auart_console_defconfig index 174c019..7753967 100644 --- a/configs/mx28evk_auart_console_defconfig +++ b/configs/mx28evk_auart_console_defconfig @@ -4,3 +4,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="MXS_AUART,MXS_AUART_BASE=MXS_UARTAPP3_BASE,ENV_IS_IN_MMC" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/mx28evk_defconfig b/configs/mx28evk_defconfig index 0f8867f..55ea267 100644 --- a/configs/mx28evk_defconfig +++ b/configs/mx28evk_defconfig @@ -4,3 +4,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="ENV_IS_IN_MMC" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/mx28evk_nand_defconfig b/configs/mx28evk_nand_defconfig index 89eda0b..ed6137c 100644 --- a/configs/mx28evk_nand_defconfig +++ b/configs/mx28evk_nand_defconfig @@ -4,3 +4,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="ENV_IS_IN_NAND" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/mx28evk_spi_defconfig b/configs/mx28evk_spi_defconfig index 19f088c..2fe16e3 100644 --- a/configs/mx28evk_spi_defconfig +++ b/configs/mx28evk_spi_defconfig @@ -4,3 +4,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="ENV_IS_IN_SPI_FLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/mx51_efikamx_defconfig b/configs/mx51_efikamx_defconfig index 55dcd67..3f89bee 100644 --- a/configs/mx51_efikamx_defconfig +++ b/configs/mx51_efikamx_defconfig @@ -2,3 +2,4 @@ CONFIG_ARM=y CONFIG_TARGET_MX51_EFIKAMX=y CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/mx51_efikasb_defconfig b/configs/mx51_efikasb_defconfig index 9958645..662aad4 100644 --- a/configs/mx51_efikasb_defconfig +++ b/configs/mx51_efikasb_defconfig @@ -2,3 +2,4 @@ CONFIG_ARM=y CONFIG_TARGET_MX51_EFIKAMX=y CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/mx6dlsabreauto_defconfig b/configs/mx6dlsabreauto_defconfig index 7578fc8..92c1db4 100644 --- a/configs/mx6dlsabreauto_defconfig +++ b/configs/mx6dlsabreauto_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_MX6QSABREAUTO=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6DL" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/mx6dlsabresd_defconfig b/configs/mx6dlsabresd_defconfig index 92d77f9..5a5a8e0 100644 --- a/configs/mx6dlsabresd_defconfig +++ b/configs/mx6dlsabresd_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_MX6SABRESD=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6dlsabresd.cfg,MX6DL" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/mx6qsabreauto_defconfig b/configs/mx6qsabreauto_defconfig index 3d584bd..df85271 100644 --- a/configs/mx6qsabreauto_defconfig +++ b/configs/mx6qsabreauto_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_MX6QSABREAUTO=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/mx6qsabrelite_defconfig b/configs/mx6qsabrelite_defconfig index 9ccf097..e544337 100644 --- a/configs/mx6qsabrelite_defconfig +++ b/configs/mx6qsabrelite_defconfig @@ -4,4 +4,5 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y CONFIG_DM=y +CONFIG_SPI_FLASH=y CONFIG_DM_THERMAL=y diff --git a/configs/mx6qsabresd_defconfig b/configs/mx6qsabresd_defconfig index 887a509..1508e26 100644 --- a/configs/mx6qsabresd_defconfig +++ b/configs/mx6qsabresd_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_MX6SABRESD=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg,MX6Q" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/mx6sabresd_spl_defconfig b/configs/mx6sabresd_spl_defconfig index a9adcdb..1f573cd 100644 --- a/configs/mx6sabresd_spl_defconfig +++ b/configs/mx6sabresd_spl_defconfig @@ -4,3 +4,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6Q" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/mx6slevk_defconfig b/configs/mx6slevk_defconfig index dd623dd..ccb6e2a 100644 --- a/configs/mx6slevk_defconfig +++ b/configs/mx6slevk_defconfig @@ -3,4 +3,5 @@ CONFIG_TARGET_MX6SLEVK=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL" CONFIG_CMD_NET=y CONFIG_DM=y +CONFIG_SPI_FLASH=y CONFIG_DM_THERMAL=y diff --git a/configs/mx6slevk_spinor_defconfig b/configs/mx6slevk_spinor_defconfig index 237c5b5..912b162 100644 --- a/configs/mx6slevk_spinor_defconfig +++ b/configs/mx6slevk_spinor_defconfig @@ -3,4 +3,5 @@ CONFIG_TARGET_MX6SLEVK=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL,SYS_BOOT_SPINOR" CONFIG_CMD_NET=y CONFIG_DM=y +CONFIG_SPI_FLASH=y CONFIG_DM_THERMAL=y diff --git a/configs/mx6sxsabresd_defconfig b/configs/mx6sxsabresd_defconfig index 058e3f8..4766530 100644 --- a/configs/mx6sxsabresd_defconfig +++ b/configs/mx6sxsabresd_defconfig @@ -2,3 +2,4 @@ CONFIG_ARM=y CONFIG_TARGET_MX6SXSABRESD=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg,MX6SX" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/mx6sxsabresd_spl_defconfig b/configs/mx6sxsabresd_spl_defconfig index 0e3159e..e499a0a 100644 --- a/configs/mx6sxsabresd_spl_defconfig +++ b/configs/mx6sxsabresd_spl_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_MX6SXSABRESD=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6SX" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/net2big_v2_defconfig b/configs/net2big_v2_defconfig index aa4bdd6..03aa0bf 100644 --- a/configs/net2big_v2_defconfig +++ b/configs/net2big_v2_defconfig @@ -3,3 +3,4 @@ CONFIG_KIRKWOOD=y CONFIG_TARGET_NET2BIG_V2=y CONFIG_SYS_EXTRA_OPTIONS="NET2BIG_V2" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/netspace_lite_v2_defconfig b/configs/netspace_lite_v2_defconfig index b6f6fa5..7777c40 100644 --- a/configs/netspace_lite_v2_defconfig +++ b/configs/netspace_lite_v2_defconfig @@ -3,3 +3,4 @@ CONFIG_KIRKWOOD=y CONFIG_TARGET_NETSPACE_V2=y CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_LITE_V2" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/netspace_max_v2_defconfig b/configs/netspace_max_v2_defconfig index dcb8c32..c2052ed 100644 --- a/configs/netspace_max_v2_defconfig +++ b/configs/netspace_max_v2_defconfig @@ -3,3 +3,4 @@ CONFIG_KIRKWOOD=y CONFIG_TARGET_NETSPACE_V2=y CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_MAX_V2" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/netspace_mini_v2_defconfig b/configs/netspace_mini_v2_defconfig index 50c5f97..6508f3d 100644 --- a/configs/netspace_mini_v2_defconfig +++ b/configs/netspace_mini_v2_defconfig @@ -3,3 +3,4 @@ CONFIG_KIRKWOOD=y CONFIG_TARGET_NETSPACE_V2=y CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_MINI_V2" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/netspace_v2_defconfig b/configs/netspace_v2_defconfig index a6495e3..4cb15b9 100644 --- a/configs/netspace_v2_defconfig +++ b/configs/netspace_v2_defconfig @@ -3,3 +3,4 @@ CONFIG_KIRKWOOD=y CONFIG_TARGET_NETSPACE_V2=y CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_V2" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/nitrogen6dl2g_defconfig b/configs/nitrogen6dl2g_defconfig index ec0e346..7216400 100644 --- a/configs/nitrogen6dl2g_defconfig +++ b/configs/nitrogen6dl2g_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_NITROGEN6X=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl2g.cfg,MX6DL,DDR_MB=2048" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/nitrogen6dl_defconfig b/configs/nitrogen6dl_defconfig index 838a43e..805b1d8 100644 --- a/configs/nitrogen6dl_defconfig +++ b/configs/nitrogen6dl_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_NITROGEN6X=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/nitrogen6q2g_defconfig b/configs/nitrogen6q2g_defconfig index a739e22..2dc8c5c 100644 --- a/configs/nitrogen6q2g_defconfig +++ b/configs/nitrogen6q2g_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_NITROGEN6X=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q,DDR_MB=2048" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/nitrogen6q_defconfig b/configs/nitrogen6q_defconfig index b4b0524..fc7e708 100644 --- a/configs/nitrogen6q_defconfig +++ b/configs/nitrogen6q_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_NITROGEN6X=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/nitrogen6s1g_defconfig b/configs/nitrogen6s1g_defconfig index 118f605..29dc3d9 100644 --- a/configs/nitrogen6s1g_defconfig +++ b/configs/nitrogen6s1g_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_NITROGEN6X=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/nitrogen6s_defconfig b/configs/nitrogen6s_defconfig index 3e70de9..4f13504 100644 --- a/configs/nitrogen6s_defconfig +++ b/configs/nitrogen6s_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_NITROGEN6X=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/nyan-big_defconfig b/configs/nyan-big_defconfig index 81949e8..a040b1c 100644 --- a/configs/nyan-big_defconfig +++ b/configs/nyan-big_defconfig @@ -4,10 +4,14 @@ CONFIG_TEGRA124=y CONFIG_TARGET_NYAN_BIG=y CONFIG_DEFAULT_DEVICE_TREE="tegra124-nyan-big" CONFIG_CMD_NET=y -CONFIG_DISPLAY_PORT=y -CONFIG_VIDEO_TEGRA124=y -CONFIG_DM_CROS_EC=y +CONFIG_SPL_DM=y +CONFIG_SPI_FLASH=y +CONFIG_CMD_CROS_EC=y CONFIG_CROS_EC=y CONFIG_CROS_EC_SPI=y CONFIG_CROS_EC_KEYB=y -CONFIG_CMD_CROS_EC=y +CONFIG_DISPLAY_PORT=y +CONFIG_VIDEO_TEGRA124=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig index c9c4849..e081c73 100644 --- a/configs/odroid-xu3_defconfig +++ b/configs/odroid-xu3_defconfig @@ -1,6 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_ODROID_XU3=y -# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_DEFAULT_DEVICE_TREE="exynos5422-odroidxu3" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_CMD_NET=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/odroid_defconfig b/configs/odroid_defconfig index 41005c7..3cef0ec 100644 --- a/configs/odroid_defconfig +++ b/configs/odroid_defconfig @@ -1,18 +1,20 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_ODROID=y -# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="exynos4412-odroid" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_OF_CONTROL=y +CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_DM_I2C=y CONFIG_DM_I2C_COMPAT=y CONFIG_DM_PMIC=y CONFIG_DM_PMIC_MAX77686=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_MAX77686=y +CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_ERRNO_STR=y diff --git a/configs/omap3_mvblx_defconfig b/configs/omap3_mvblx_defconfig index fd3902d..05c1c46 100644 --- a/configs/omap3_mvblx_defconfig +++ b/configs/omap3_mvblx_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_MVBLX=y -CONFIG_CMD_NET=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR="S" +CONFIG_CMD_NET=y diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig index e4b7e13..1e76735 100644 --- a/configs/omapl138_lcdk_defconfig +++ b/configs/omapl138_lcdk_defconfig @@ -3,3 +3,4 @@ CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_OMAPL138_LCDK=y CONFIG_SPL=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/origen_defconfig b/configs/origen_defconfig index 657ef7e..a893660 100644 --- a/configs/origen_defconfig +++ b/configs/origen_defconfig @@ -1,8 +1,10 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_ORIGEN=y -CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="exynos4210-origen" CONFIG_SPL=y CONFIG_CMD_SETEXPR=y CONFIG_OF_CONTROL=y +CONFIG_SPL_DISABLE_OF_CONTROL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/ot1200_defconfig b/configs/ot1200_defconfig index 20f64bb..b4cce31 100644 --- a/configs/ot1200_defconfig +++ b/configs/ot1200_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_OT1200=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/bachmann/ot1200/mx6q_4x_mt41j128.cfg,MX6Q" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/ot1200_spl_defconfig b/configs/ot1200_spl_defconfig index 810dff8..42eefb8 100644 --- a/configs/ot1200_spl_defconfig +++ b/configs/ot1200_spl_defconfig @@ -4,3 +4,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/paz00_defconfig b/configs/paz00_defconfig index 3a72b31..1dfef48 100644 --- a/configs/paz00_defconfig +++ b/configs/paz00_defconfig @@ -4,3 +4,7 @@ CONFIG_TEGRA20=y CONFIG_TARGET_PAZ00=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-paz00" CONFIG_CMD_NET=y +CONFIG_SPL_DM=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/pb1000_defconfig b/configs/pb1000_defconfig index f1fdf7c..4b8212c 100644 --- a/configs/pb1000_defconfig +++ b/configs/pb1000_defconfig @@ -2,3 +2,4 @@ CONFIG_MIPS=y CONFIG_TARGET_PB1X00=y CONFIG_SYS_EXTRA_OPTIONS="PB1000" CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/pcm051_rev1_defconfig b/configs/pcm051_rev1_defconfig index 1ea9333..8050b42 100644 --- a/configs/pcm051_rev1_defconfig +++ b/configs/pcm051_rev1_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_PCM051=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="REV1" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/pcm051_rev3_defconfig b/configs/pcm051_rev3_defconfig index a0a32f6..16f314e 100644 --- a/configs/pcm051_rev3_defconfig +++ b/configs/pcm051_rev3_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_PCM051=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="REV3" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/peach-pi_defconfig b/configs/peach-pi_defconfig index 88f5e97..a198455 100644 --- a/configs/peach-pi_defconfig +++ b/configs/peach-pi_defconfig @@ -4,7 +4,10 @@ CONFIG_TARGET_PEACH_PI=y CONFIG_DEFAULT_DEVICE_TREE="exynos5800-peach-pi" CONFIG_SPL=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y CONFIG_CMD_CROS_EC=y CONFIG_CROS_EC=y CONFIG_CROS_EC_SPI=y CONFIG_CROS_EC_KEYB=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/peach-pit_defconfig b/configs/peach-pit_defconfig index e6b5bce..a519cff 100644 --- a/configs/peach-pit_defconfig +++ b/configs/peach-pit_defconfig @@ -4,7 +4,10 @@ CONFIG_TARGET_PEACH_PIT=y CONFIG_DEFAULT_DEVICE_TREE="exynos5420-peach-pit" CONFIG_SPL=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y CONFIG_CMD_CROS_EC=y CONFIG_CROS_EC=y CONFIG_CROS_EC_SPI=y CONFIG_CROS_EC_KEYB=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/ph1_ld4_defconfig b/configs/ph1_ld4_defconfig index 723989c..9b8c668 100644 --- a/configs/ph1_ld4_defconfig +++ b/configs/ph1_ld4_defconfig @@ -1,9 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_UNIPHIER=y -CONFIG_SPL_DM=y CONFIG_MACH_PH1_LD4=y CONFIG_PFC_MICRO_SUPPORT_CARD=y -CONFIG_NET=y CONFIG_SYS_TEXT_BASE=0x84000000 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-ld4-ref" CONFIG_FIT=y @@ -37,6 +35,7 @@ CONFIG_CMD_NFS=y CONFIG_CMD_PING=y CONFIG_CMD_TIME=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM=y CONFIG_NAND_DENALI=y CONFIG_SYS_NAND_DENALI_64BIT=y CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 diff --git a/configs/ph1_pro4_defconfig b/configs/ph1_pro4_defconfig index a2e2d4f..bf0f8f2 100644 --- a/configs/ph1_pro4_defconfig +++ b/configs/ph1_pro4_defconfig @@ -1,8 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_UNIPHIER=y -CONFIG_SPL_DM=y CONFIG_PFC_MICRO_SUPPORT_CARD=y -CONFIG_NET=y CONFIG_SYS_TEXT_BASE=0x84000000 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-pro4-ref" CONFIG_FIT=y @@ -36,6 +34,7 @@ CONFIG_CMD_NFS=y CONFIG_CMD_PING=y CONFIG_CMD_TIME=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM=y CONFIG_NAND_DENALI=y CONFIG_SYS_NAND_DENALI_64BIT=y CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 diff --git a/configs/ph1_sld8_defconfig b/configs/ph1_sld8_defconfig index dc59dcb..791e633 100644 --- a/configs/ph1_sld8_defconfig +++ b/configs/ph1_sld8_defconfig @@ -1,9 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_UNIPHIER=y -CONFIG_SPL_DM=y CONFIG_MACH_PH1_SLD8=y CONFIG_PFC_MICRO_SUPPORT_CARD=y -CONFIG_NET=y CONFIG_SYS_TEXT_BASE=0x84000000 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-sld8-ref" CONFIG_FIT=y @@ -37,6 +35,7 @@ CONFIG_CMD_NFS=y CONFIG_CMD_PING=y CONFIG_CMD_TIME=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM=y CONFIG_NAND_DENALI=y CONFIG_SYS_NAND_DENALI_64BIT=y CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 diff --git a/configs/plutux_defconfig b/configs/plutux_defconfig index 1a9fa47..c9a3afe 100644 --- a/configs/plutux_defconfig +++ b/configs/plutux_defconfig @@ -4,3 +4,7 @@ CONFIG_TEGRA20=y CONFIG_TARGET_PLUTUX=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-plutux" CONFIG_CMD_NET=y +CONFIG_SPL_DM=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/porter_defconfig b/configs/porter_defconfig index d545b53..1ef1483 100644 --- a/configs/porter_defconfig +++ b/configs/porter_defconfig @@ -2,4 +2,5 @@ CONFIG_ARM=y CONFIG_RMOBILE=y CONFIG_TARGET_PORTER=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y CONFIG_SH_SDHI=y diff --git a/configs/portl2_defconfig b/configs/portl2_defconfig index 37ced5a..e6c9730 100644 --- a/configs/portl2_defconfig +++ b/configs/portl2_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_KM_KIRKWOOD=y CONFIG_SYS_EXTRA_OPTIONS="KM_PORTL2" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/pr1_defconfig b/configs/pr1_defconfig index a8eb7f3..405e494 100644 --- a/configs/pr1_defconfig +++ b/configs/pr1_defconfig @@ -1,5 +1,6 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_PR1=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y CONFIG_LIB_RAND=y diff --git a/configs/pxm2_defconfig b/configs/pxm2_defconfig index 10f2fe9..63fd450 100644 --- a/configs/pxm2_defconfig +++ b/configs/pxm2_defconfig @@ -1,7 +1,8 @@ CONFIG_ARM=y CONFIG_TARGET_PXM2=y -CONFIG_CMD_NET=y CONFIG_SPL=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" +CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/qemu-x86_defconfig b/configs/qemu-x86_defconfig index 901cbd7..38e0fdb 100644 --- a/configs/qemu-x86_defconfig +++ b/configs/qemu-x86_defconfig @@ -1,10 +1,14 @@ CONFIG_X86=y -CONFIG_VENDOR_EMULATION=y CONFIG_DEFAULT_DEVICE_TREE="qemu-x86_i440fx" -CONFIG_TARGET_QEMU_X86=y CONFIG_GENERATE_PIRQ_TABLE=y CONFIG_CMD_NET=y +CONFIG_BOOTSTAGE=y +CONFIG_BOOTSTAGE_REPORT=y +CONFIG_CMD_BOOTSTAGE=y CONFIG_OF_CONTROL=y +CONFIG_SPI_FLASH=y CONFIG_VIDEO_VESA=y CONFIG_FRAMEBUFFER_SET_VESA_MODE=y CONFIG_FRAMEBUFFER_VESA_MODE_111=y +CONFIG_USE_PRIVATE_LIBGCC=y +CONFIG_SYS_VSNPRINTF=y diff --git a/configs/qemu_mips64_defconfig b/configs/qemu_mips64_defconfig index a96e3f7..9eceae6 100644 --- a/configs/qemu_mips64_defconfig +++ b/configs/qemu_mips64_defconfig @@ -2,3 +2,4 @@ CONFIG_MIPS=y CONFIG_TARGET_QEMU_MIPS=y CONFIG_CPU_MIPS64_R1=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/qemu_mips64el_defconfig b/configs/qemu_mips64el_defconfig index 94c0610..d847757 100644 --- a/configs/qemu_mips64el_defconfig +++ b/configs/qemu_mips64el_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_QEMU_MIPS=y CONFIG_SYS_LITTLE_ENDIAN=y CONFIG_CPU_MIPS64_R1=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/qemu_mips_defconfig b/configs/qemu_mips_defconfig index 446d87d..714e72b 100644 --- a/configs/qemu_mips_defconfig +++ b/configs/qemu_mips_defconfig @@ -1,3 +1,4 @@ CONFIG_MIPS=y CONFIG_TARGET_QEMU_MIPS=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/qemu_mipsel_defconfig b/configs/qemu_mipsel_defconfig index e0b3990..f6cb45e 100644 --- a/configs/qemu_mipsel_defconfig +++ b/configs/qemu_mipsel_defconfig @@ -2,3 +2,4 @@ CONFIG_MIPS=y CONFIG_TARGET_QEMU_MIPS=y CONFIG_SYS_LITTLE_ENDIAN=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/r0p7734_defconfig b/configs/r0p7734_defconfig index caf0cb5..727c46c 100644 --- a/configs/r0p7734_defconfig +++ b/configs/r0p7734_defconfig @@ -1,3 +1,4 @@ CONFIG_SH=y CONFIG_TARGET_R0P7734=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/r2dplus_defconfig b/configs/r2dplus_defconfig index 6d37e26..05026bc 100644 --- a/configs/r2dplus_defconfig +++ b/configs/r2dplus_defconfig @@ -1,3 +1,4 @@ CONFIG_SH=y CONFIG_TARGET_R2DPLUS=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/r7-tv-dongle_defconfig b/configs/r7-tv-dongle_defconfig index bc1657d..9c124d0 100644 --- a/configs/r7-tv-dongle_defconfig +++ b/configs/r7-tv-dongle_defconfig @@ -4,5 +4,13 @@ CONFIG_MACH_SUN5I=y CONFIG_DRAM_CLK=384 CONFIG_USB1_VBUS_PIN="PG13" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-r7-tv-dongle" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/r7780mp_defconfig b/configs/r7780mp_defconfig index f32dfcb..514bd70 100644 --- a/configs/r7780mp_defconfig +++ b/configs/r7780mp_defconfig @@ -1,3 +1,4 @@ CONFIG_SH=y CONFIG_TARGET_R7780MP=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/rastaban_defconfig b/configs/rastaban_defconfig index 954f38a..2315715 100644 --- a/configs/rastaban_defconfig +++ b/configs/rastaban_defconfig @@ -1,7 +1,8 @@ CONFIG_ARM=y CONFIG_TARGET_RASTABAN=y -CONFIG_CMD_NET=y CONFIG_SPL=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" +CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/riotboard_defconfig b/configs/riotboard_defconfig index 104b3e6..cbe3dea 100644 --- a/configs/riotboard_defconfig +++ b/configs/riotboard_defconfig @@ -4,4 +4,5 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg, CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y CONFIG_DM=y +CONFIG_SPI_FLASH=y CONFIG_DM_THERMAL=y diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig index b72d3a5..534a8a8 100644 --- a/configs/rpi_2_defconfig +++ b/configs/rpi_2_defconfig @@ -2,3 +2,4 @@ CONFIG_ARM=y CONFIG_ARCH_BCM283X=y CONFIG_TARGET_RPI_2=y CONFIG_CMD_NET=y +CONFIG_PHYS_TO_BUS=y diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig index fc1aef3..ccfbb8f 100644 --- a/configs/rpi_defconfig +++ b/configs/rpi_defconfig @@ -2,3 +2,4 @@ CONFIG_ARM=y CONFIG_ARCH_BCM283X=y CONFIG_TARGET_RPI=y CONFIG_CMD_NET=y +CONFIG_PHYS_TO_BUS=y diff --git a/configs/rsk7203_defconfig b/configs/rsk7203_defconfig index c85ebba..27f9b65 100644 --- a/configs/rsk7203_defconfig +++ b/configs/rsk7203_defconfig @@ -1,3 +1,4 @@ CONFIG_SH=y CONFIG_TARGET_RSK7203=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/rsk7264_defconfig b/configs/rsk7264_defconfig index 1bf5d06..701f73a 100644 --- a/configs/rsk7264_defconfig +++ b/configs/rsk7264_defconfig @@ -1,3 +1,4 @@ CONFIG_SH=y CONFIG_TARGET_RSK7264=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/rsk7269_defconfig b/configs/rsk7269_defconfig index 6ddd099..ae5fe02 100644 --- a/configs/rsk7269_defconfig +++ b/configs/rsk7269_defconfig @@ -1,3 +1,4 @@ CONFIG_SH=y CONFIG_TARGET_RSK7269=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/rut_defconfig b/configs/rut_defconfig index 93ab514..2f125e4 100644 --- a/configs/rut_defconfig +++ b/configs/rut_defconfig @@ -1,7 +1,8 @@ CONFIG_ARM=y CONFIG_TARGET_RUT=y -CONFIG_CMD_NET=y CONFIG_SPL=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" +CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/s5pc210_universal_defconfig b/configs/s5pc210_universal_defconfig index 32ac86a..30d6059 100644 --- a/configs/s5pc210_universal_defconfig +++ b/configs/s5pc210_universal_defconfig @@ -1,7 +1,9 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_S5PC210_UNIVERSAL=y -CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="exynos4210-universal_c210" CONFIG_CMD_SETEXPR=y CONFIG_OF_CONTROL=y +CONFIG_SPL_DISABLE_OF_CONTROL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/sama5d3xek_mmc_defconfig b/configs/sama5d3xek_mmc_defconfig index fd80a64..5c5841f 100644 --- a/configs/sama5d3xek_mmc_defconfig +++ b/configs/sama5d3xek_mmc_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_MMC" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/sama5d3xek_nandflash_defconfig b/configs/sama5d3xek_nandflash_defconfig index 9157ead..d178620 100644 --- a/configs/sama5d3xek_nandflash_defconfig +++ b/configs/sama5d3xek_nandflash_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_NANDFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/sama5d3xek_spiflash_defconfig b/configs/sama5d3xek_spiflash_defconfig index da1f3c1..ad0aedf 100644 --- a/configs/sama5d3xek_spiflash_defconfig +++ b/configs/sama5d3xek_spiflash_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_SERIALFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/sama5d4_xplained_mmc_defconfig b/configs/sama5d4_xplained_mmc_defconfig index f5a344c..0fa5852 100644 --- a/configs/sama5d4_xplained_mmc_defconfig +++ b/configs/sama5d4_xplained_mmc_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/sama5d4_xplained_nandflash_defconfig b/configs/sama5d4_xplained_nandflash_defconfig index 0e04af9..3bf4ac6 100644 --- a/configs/sama5d4_xplained_nandflash_defconfig +++ b/configs/sama5d4_xplained_nandflash_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/sama5d4_xplained_spiflash_defconfig b/configs/sama5d4_xplained_spiflash_defconfig index a8cabb7..1074471 100644 --- a/configs/sama5d4_xplained_spiflash_defconfig +++ b/configs/sama5d4_xplained_spiflash_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/sama5d4ek_mmc_defconfig b/configs/sama5d4ek_mmc_defconfig index 84c64a9..fc9e0f1 100644 --- a/configs/sama5d4ek_mmc_defconfig +++ b/configs/sama5d4ek_mmc_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/sama5d4ek_nandflash_defconfig b/configs/sama5d4ek_nandflash_defconfig index 0782baf..3961654 100644 --- a/configs/sama5d4ek_nandflash_defconfig +++ b/configs/sama5d4ek_nandflash_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/sama5d4ek_spiflash_defconfig b/configs/sama5d4ek_spiflash_defconfig index b5a3eb5..12857e4 100644 --- a/configs/sama5d4ek_spiflash_defconfig +++ b/configs/sama5d4ek_spiflash_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index 31fe2f9..4c2c230 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -1,27 +1,27 @@ -CONFIG_DM_USB=y -CONFIG_NETDEVICES=y -CONFIG_DM_ETH=y CONFIG_PCI=y -CONFIG_SYS_VSNPRINTF=y CONFIG_DEFAULT_DEVICE_TREE="sandbox" -CONFIG_BOOTSTAGE=y -CONFIG_BOOTSTAGE_REPORT=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y CONFIG_CMD_NET=y CONFIG_CMD_SOUND=y +CONFIG_BOOTSTAGE=y +CONFIG_BOOTSTAGE_REPORT=y CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_OF_CONTROL=y CONFIG_OF_HOSTFILE=y CONFIG_DM_PCI=y CONFIG_PCI_SANDBOX=y +CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SANDBOX=y CONFIG_CMD_CROS_EC=y CONFIG_CROS_EC=y CONFIG_CROS_EC_SANDBOX=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y CONFIG_CROS_EC_KEYB=y +CONFIG_SANDBOX_SERIAL=y CONFIG_TPM_TIS_SANDBOX=y CONFIG_SYS_I2C_SANDBOX=y CONFIG_SANDBOX_SPI=y @@ -33,12 +33,13 @@ CONFIG_DM_REGULATOR_SANDBOX=y CONFIG_SOUND=y CONFIG_SOUND_SANDBOX=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_EMUL=y CONFIG_USB_STORAGE=y CONFIG_DM_RTC=y +CONFIG_SYS_VSNPRINTF=y CONFIG_ERRNO_STR=y CONFIG_UNIT_TEST=y CONFIG_UT_TIME=y CONFIG_UT_DM=y CONFIG_UT_ENV=y -CONFIG_SANDBOX_SERIAL=y diff --git a/configs/seaboard_defconfig b/configs/seaboard_defconfig index 9c5f2bc..01cb8f7 100644 --- a/configs/seaboard_defconfig +++ b/configs/seaboard_defconfig @@ -4,3 +4,7 @@ CONFIG_TEGRA20=y CONFIG_TARGET_SEABOARD=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-seaboard" CONFIG_CMD_NET=y +CONFIG_SPL_DM=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/sh7752evb_defconfig b/configs/sh7752evb_defconfig index bbf806d..bd97913 100644 --- a/configs/sh7752evb_defconfig +++ b/configs/sh7752evb_defconfig @@ -2,3 +2,5 @@ CONFIG_SH=y CONFIG_SH_32BIT=y CONFIG_TARGET_SH7752EVB=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/sh7753evb_defconfig b/configs/sh7753evb_defconfig index 536cc71..84c207a 100644 --- a/configs/sh7753evb_defconfig +++ b/configs/sh7753evb_defconfig @@ -1,3 +1,5 @@ CONFIG_SH=y CONFIG_TARGET_SH7753EVB=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/sh7757lcr_defconfig b/configs/sh7757lcr_defconfig index 138b7b9..d22e70e 100644 --- a/configs/sh7757lcr_defconfig +++ b/configs/sh7757lcr_defconfig @@ -2,3 +2,5 @@ CONFIG_SH=y CONFIG_SH_32BIT=y CONFIG_TARGET_SH7757LCR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/sh7763rdp_defconfig b/configs/sh7763rdp_defconfig index 0d65b16..21fbc6a 100644 --- a/configs/sh7763rdp_defconfig +++ b/configs/sh7763rdp_defconfig @@ -1,3 +1,4 @@ CONFIG_SH=y CONFIG_TARGET_SH7763RDP=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/sh7785lcr_32bit_defconfig b/configs/sh7785lcr_32bit_defconfig index 09e85a6..a0f0640 100644 --- a/configs/sh7785lcr_32bit_defconfig +++ b/configs/sh7785lcr_32bit_defconfig @@ -2,3 +2,4 @@ CONFIG_SH=y CONFIG_SH_32BIT=y CONFIG_TARGET_SH7785LCR=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/sh7785lcr_defconfig b/configs/sh7785lcr_defconfig index a48a871..0984580 100644 --- a/configs/sh7785lcr_defconfig +++ b/configs/sh7785lcr_defconfig @@ -1,3 +1,4 @@ CONFIG_SH=y CONFIG_TARGET_SH7785LCR=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/shmin_defconfig b/configs/shmin_defconfig index 60725fc..8979fdd 100644 --- a/configs/shmin_defconfig +++ b/configs/shmin_defconfig @@ -1,3 +1,4 @@ CONFIG_SH=y CONFIG_TARGET_SHMIN=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/silk_defconfig b/configs/silk_defconfig index 28ca83d..ed107e3 100644 --- a/configs/silk_defconfig +++ b/configs/silk_defconfig @@ -2,4 +2,5 @@ CONFIG_ARM=y CONFIG_RMOBILE=y CONFIG_TARGET_SILK=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y CONFIG_SH_SDHI=y diff --git a/configs/smdk5250_defconfig b/configs/smdk5250_defconfig index 0602fde..9092f3b 100644 --- a/configs/smdk5250_defconfig +++ b/configs/smdk5250_defconfig @@ -5,8 +5,11 @@ CONFIG_DEFAULT_DEVICE_TREE="exynos5250-smdk5250" CONFIG_SPL=y CONFIG_CMD_NET=y CONFIG_CMD_SOUND=y +CONFIG_SPI_FLASH=y CONFIG_SOUND=y CONFIG_I2S=y CONFIG_I2S_SAMSUNG=y CONFIG_SOUND_MAX98095=y CONFIG_SOUND_WM8994=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/smdk5420_defconfig b/configs/smdk5420_defconfig index 8900525..e3d829b 100644 --- a/configs/smdk5420_defconfig +++ b/configs/smdk5420_defconfig @@ -4,3 +4,6 @@ CONFIG_TARGET_SMDK5420=y CONFIG_DEFAULT_DEVICE_TREE="exynos5420-smdk5420" CONFIG_SPL=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/smdkv310_defconfig b/configs/smdkv310_defconfig index 1479145..5d01f89 100644 --- a/configs/smdkv310_defconfig +++ b/configs/smdkv310_defconfig @@ -5,3 +5,5 @@ CONFIG_DEFAULT_DEVICE_TREE="exynos4210-smdkv310" CONFIG_SPL=y CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/snow_defconfig b/configs/snow_defconfig index 6f838a9..a43e51e 100644 --- a/configs/snow_defconfig +++ b/configs/snow_defconfig @@ -5,6 +5,7 @@ CONFIG_DEFAULT_DEVICE_TREE="exynos5250-snow" CONFIG_SPL=y CONFIG_CMD_NET=y CONFIG_CMD_SOUND=y +CONFIG_SPI_FLASH=y CONFIG_CMD_CROS_EC=y CONFIG_CROS_EC=y CONFIG_CROS_EC_I2C=y @@ -14,3 +15,5 @@ CONFIG_I2S=y CONFIG_I2S_SAMSUNG=y CONFIG_SOUND_MAX98095=y CONFIG_SOUND_WM8994=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/socfpga_arria5_defconfig b/configs/socfpga_arria5_defconfig index 473e6d3..8c5b109 100644 --- a/configs/socfpga_arria5_defconfig +++ b/configs/socfpga_arria5_defconfig @@ -6,3 +6,4 @@ CONFIG_SPL=y CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y CONFIG_OF_CONTROL=y +CONFIG_SPI_FLASH=y diff --git a/configs/socfpga_cyclone5_defconfig b/configs/socfpga_cyclone5_defconfig index b674721..6302ec5 100644 --- a/configs/socfpga_cyclone5_defconfig +++ b/configs/socfpga_cyclone5_defconfig @@ -1,10 +1,11 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y CONFIG_TARGET_SOCFPGA_CYCLONE5=y -CONFIG_NETDEVICES=y CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socdk" CONFIG_SPL=y CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y CONFIG_OF_CONTROL=y +CONFIG_SPI_FLASH=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/socfpga_socrates_defconfig b/configs/socfpga_socrates_defconfig index c9fcb74..cf390f3 100644 --- a/configs/socfpga_socrates_defconfig +++ b/configs/socfpga_socrates_defconfig @@ -1,11 +1,12 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y CONFIG_TARGET_SOCFPGA_CYCLONE5=y -CONFIG_SPL_DISABLE_OF_CONTROL=y -CONFIG_NETDEVICES=y CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socrates" CONFIG_SPL=y CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y CONFIG_OF_CONTROL=y +CONFIG_SPL_DISABLE_OF_CONTROL=y +CONFIG_SPI_FLASH=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear300_defconfig b/configs/spear300_defconfig index ccd5e56..5d179b9 100644 --- a/configs/spear300_defconfig +++ b/configs/spear300_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR300=y -CONFIG_NETDEVICES=y CONFIG_SYS_EXTRA_OPTIONS="spear300" CONFIG_CMD_NET=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear300_nand_defconfig b/configs/spear300_nand_defconfig index 47a3893..d0a62a8 100644 --- a/configs/spear300_nand_defconfig +++ b/configs/spear300_nand_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR300=y -CONFIG_NETDEVICES=y CONFIG_SYS_EXTRA_OPTIONS="spear300,nand" CONFIG_CMD_NET=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear300_usbtty_defconfig b/configs/spear300_usbtty_defconfig index 16799e0..ae5c2b5 100644 --- a/configs/spear300_usbtty_defconfig +++ b/configs/spear300_usbtty_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR300=y -CONFIG_NETDEVICES=y CONFIG_SYS_EXTRA_OPTIONS="spear300,usbtty" CONFIG_CMD_NET=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear300_usbtty_nand_defconfig b/configs/spear300_usbtty_nand_defconfig index 6d74951..a5020c9 100644 --- a/configs/spear300_usbtty_nand_defconfig +++ b/configs/spear300_usbtty_nand_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR300=y -CONFIG_NETDEVICES=y CONFIG_SYS_EXTRA_OPTIONS="spear300,usbtty,nand" CONFIG_CMD_NET=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear310_defconfig b/configs/spear310_defconfig index 456d3d1..0e01abd 100644 --- a/configs/spear310_defconfig +++ b/configs/spear310_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR310=y -CONFIG_NETDEVICES=y CONFIG_SYS_EXTRA_OPTIONS="spear310" CONFIG_CMD_NET=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear310_nand_defconfig b/configs/spear310_nand_defconfig index d5d5376..cd99e3a 100644 --- a/configs/spear310_nand_defconfig +++ b/configs/spear310_nand_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR310=y -CONFIG_NETDEVICES=y CONFIG_SYS_EXTRA_OPTIONS="spear310,nand" CONFIG_CMD_NET=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear310_pnor_defconfig b/configs/spear310_pnor_defconfig index 27a7994..ef4d3a1 100644 --- a/configs/spear310_pnor_defconfig +++ b/configs/spear310_pnor_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR310=y -CONFIG_NETDEVICES=y CONFIG_SYS_EXTRA_OPTIONS="spear310,FLASH_PNOR" CONFIG_CMD_NET=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear310_usbtty_defconfig b/configs/spear310_usbtty_defconfig index ce3cfca..5dea48b 100644 --- a/configs/spear310_usbtty_defconfig +++ b/configs/spear310_usbtty_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR310=y -CONFIG_NETDEVICES=y CONFIG_SYS_EXTRA_OPTIONS="spear310,usbtty" CONFIG_CMD_NET=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear310_usbtty_nand_defconfig b/configs/spear310_usbtty_nand_defconfig index 601321e..c9b526c 100644 --- a/configs/spear310_usbtty_nand_defconfig +++ b/configs/spear310_usbtty_nand_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR310=y -CONFIG_NETDEVICES=y CONFIG_SYS_EXTRA_OPTIONS="spear310,usbtty,nand" CONFIG_CMD_NET=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear310_usbtty_pnor_defconfig b/configs/spear310_usbtty_pnor_defconfig index 31f3420..d9d7214 100644 --- a/configs/spear310_usbtty_pnor_defconfig +++ b/configs/spear310_usbtty_pnor_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR310=y -CONFIG_NETDEVICES=y CONFIG_SYS_EXTRA_OPTIONS="spear310,usbtty,FLASH_PNOR" CONFIG_CMD_NET=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear320_defconfig b/configs/spear320_defconfig index cfa7dce..db0a1cd 100644 --- a/configs/spear320_defconfig +++ b/configs/spear320_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR320=y -CONFIG_NETDEVICES=y CONFIG_SYS_EXTRA_OPTIONS="spear320" CONFIG_CMD_NET=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear320_nand_defconfig b/configs/spear320_nand_defconfig index 1023111..691433b 100644 --- a/configs/spear320_nand_defconfig +++ b/configs/spear320_nand_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR320=y -CONFIG_NETDEVICES=y CONFIG_SYS_EXTRA_OPTIONS="spear320,nand" CONFIG_CMD_NET=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear320_pnor_defconfig b/configs/spear320_pnor_defconfig index c8e3b4d..41fb10e 100644 --- a/configs/spear320_pnor_defconfig +++ b/configs/spear320_pnor_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR320=y -CONFIG_NETDEVICES=y CONFIG_SYS_EXTRA_OPTIONS="spear320,FLASH_PNOR" CONFIG_CMD_NET=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear320_usbtty_defconfig b/configs/spear320_usbtty_defconfig index 3d3dc11..3f73df6 100644 --- a/configs/spear320_usbtty_defconfig +++ b/configs/spear320_usbtty_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR320=y -CONFIG_NETDEVICES=y CONFIG_SYS_EXTRA_OPTIONS="spear320,usbtty" CONFIG_CMD_NET=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear320_usbtty_nand_defconfig b/configs/spear320_usbtty_nand_defconfig index 91bd029..8563f4c 100644 --- a/configs/spear320_usbtty_nand_defconfig +++ b/configs/spear320_usbtty_nand_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR320=y -CONFIG_NETDEVICES=y CONFIG_SYS_EXTRA_OPTIONS="spear320,usbtty,nand" CONFIG_CMD_NET=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear320_usbtty_pnor_defconfig b/configs/spear320_usbtty_pnor_defconfig index 6e887a6..3980280 100644 --- a/configs/spear320_usbtty_pnor_defconfig +++ b/configs/spear320_usbtty_pnor_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR320=y -CONFIG_NETDEVICES=y CONFIG_SYS_EXTRA_OPTIONS="spear320,usbtty,FLASH_PNOR" CONFIG_CMD_NET=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear600_defconfig b/configs/spear600_defconfig index 2d27e7a..85c484c 100644 --- a/configs/spear600_defconfig +++ b/configs/spear600_defconfig @@ -1,9 +1,9 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR600=y -CONFIG_NETDEVICES=y -CONFIG_CMD_NET=y CONFIG_SYS_EXTRA_OPTIONS="spear600" CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_NET=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear600_nand_defconfig b/configs/spear600_nand_defconfig index 2590edf..715d949 100644 --- a/configs/spear600_nand_defconfig +++ b/configs/spear600_nand_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR600=y -CONFIG_NETDEVICES=y CONFIG_SYS_EXTRA_OPTIONS="spear600,nand" CONFIG_CMD_NET=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear600_usbtty_defconfig b/configs/spear600_usbtty_defconfig index fcf1ed2..6709658 100644 --- a/configs/spear600_usbtty_defconfig +++ b/configs/spear600_usbtty_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR600=y -CONFIG_NETDEVICES=y CONFIG_SYS_EXTRA_OPTIONS="spear600,usbtty" CONFIG_CMD_NET=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear600_usbtty_nand_defconfig b/configs/spear600_usbtty_nand_defconfig index d9eaa5c..fdadae2 100644 --- a/configs/spear600_usbtty_nand_defconfig +++ b/configs/spear600_usbtty_nand_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR600=y -CONFIG_NETDEVICES=y CONFIG_SYS_EXTRA_OPTIONS="spear600,usbtty,nand" CONFIG_CMD_NET=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/stv0991_defconfig b/configs/stv0991_defconfig index f8ec5db..425bcfb 100644 --- a/configs/stv0991_defconfig +++ b/configs/stv0991_defconfig @@ -1,11 +1,11 @@ CONFIG_ARM=y CONFIG_TARGET_STV0991=y CONFIG_SYS_MALLOC_F_LEN=0x2000 -CONFIG_NETDEVICES=y -CONFIG_CMD_NET=y CONFIG_DEFAULT_DEVICE_TREE="stv0991" CONFIG_SYS_EXTRA_OPTIONS="stv0991" CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_NET=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/sunxi_Gemei_G9_defconfig b/configs/sunxi_Gemei_G9_defconfig index 35aa847..dfd1b5d 100644 --- a/configs/sunxi_Gemei_G9_defconfig +++ b/configs/sunxi_Gemei_G9_defconfig @@ -9,5 +9,13 @@ CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_VIDEO_LCD_PANEL_LVDS=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-gemei-g9" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_DM_ETH=y +CONFIG_NETDEVICES=y +CONFIG_DM_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig index b94f486..f02c442 100644 --- a/configs/taurus_defconfig +++ b/configs/taurus_defconfig @@ -4,3 +4,4 @@ CONFIG_TARGET_TAURUS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/tb100_defconfig b/configs/tb100_defconfig index c753197..c94118a 100644 --- a/configs/tb100_defconfig +++ b/configs/tb100_defconfig @@ -2,12 +2,13 @@ CONFIG_ARC=y CONFIG_ARC_CACHE_LINE_SHIFT=5 CONFIG_TARGET_TB100=y CONFIG_SYS_CLK_FREQ=500000000 -CONFIG_NETDEVICES=y -CONFIG_DM_SERIAL=y CONFIG_SYS_TEXT_BASE=0x84000000 CONFIG_DEFAULT_DEVICE_TREE="abilis_tb100" CONFIG_CMD_NET=y CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_DM=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y +CONFIG_DM_SERIAL=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/tec-ng_defconfig b/configs/tec-ng_defconfig index 317a959..99252df 100644 --- a/configs/tec-ng_defconfig +++ b/configs/tec-ng_defconfig @@ -4,3 +4,8 @@ CONFIG_TEGRA30=y CONFIG_TARGET_TEC_NG=y CONFIG_DEFAULT_DEVICE_TREE="tegra30-tec-ng" CONFIG_CMD_NET=y +CONFIG_SPL_DM=y +CONFIG_SPI_FLASH=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/tec_defconfig b/configs/tec_defconfig index e831b5c..d1fd04b 100644 --- a/configs/tec_defconfig +++ b/configs/tec_defconfig @@ -4,3 +4,7 @@ CONFIG_TEGRA20=y CONFIG_TARGET_TEC=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-tec" CONFIG_CMD_NET=y +CONFIG_SPL_DM=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/thuban_defconfig b/configs/thuban_defconfig index 5fab571..7f9afc8 100644 --- a/configs/thuban_defconfig +++ b/configs/thuban_defconfig @@ -1,7 +1,8 @@ CONFIG_ARM=y CONFIG_TARGET_THUBAN=y -CONFIG_CMD_NET=y CONFIG_SPL=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" +CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/tqma6q_mba6_mmc_defconfig b/configs/tqma6q_mba6_mmc_defconfig index 01355b6..b8022aa 100644 --- a/configs/tqma6q_mba6_mmc_defconfig +++ b/configs/tqma6q_mba6_mmc_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_TQMA6=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/tqc/tqma6/tqma6q.cfg,MX6Q,MBA6,TQMA6X_MMC_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/tqma6q_mba6_spi_defconfig b/configs/tqma6q_mba6_spi_defconfig index ba24663..321ebea 100644 --- a/configs/tqma6q_mba6_spi_defconfig +++ b/configs/tqma6q_mba6_spi_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_TQMA6=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/tqc/tqma6/tqma6q.cfg,MX6Q,MBA6,TQMA6X_SPI_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/tqma6s_mba6_mmc_defconfig b/configs/tqma6s_mba6_mmc_defconfig index cbb4500..dca194a 100644 --- a/configs/tqma6s_mba6_mmc_defconfig +++ b/configs/tqma6s_mba6_mmc_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_TQMA6=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/tqc/tqma6/tqma6s.cfg,MX6S,MBA6,TQMA6X_MMC_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/tqma6s_mba6_spi_defconfig b/configs/tqma6s_mba6_spi_defconfig index 805d8ab..f0c4fe9 100644 --- a/configs/tqma6s_mba6_spi_defconfig +++ b/configs/tqma6s_mba6_spi_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_TQMA6=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/tqc/tqma6/tqma6s.cfg,MX6S,MBA6,TQMA6X_SPI_BOOT" CONFIG_CMD_SETEXPR=y CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/trats2_defconfig b/configs/trats2_defconfig index 52e87a1..a991645 100644 --- a/configs/trats2_defconfig +++ b/configs/trats2_defconfig @@ -1,8 +1,10 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_TRATS2=y -CONFIG_SPL_DISABLE_OF_CONTROL=y -# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_DEFAULT_DEVICE_TREE="exynos4412-trats2" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_CMD_SETEXPR=y CONFIG_OF_CONTROL=y +CONFIG_SPL_DISABLE_OF_CONTROL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/trats_defconfig b/configs/trats_defconfig index 25315b3..d3aedbd 100644 --- a/configs/trats_defconfig +++ b/configs/trats_defconfig @@ -1,7 +1,9 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_TRATS=y -CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="exynos4210-trats" CONFIG_CMD_SETEXPR=y CONFIG_OF_CONTROL=y +CONFIG_SPL_DISABLE_OF_CONTROL=y +CONFIG_USB=y +CONFIG_DM_USB=y diff --git a/configs/trimslice_defconfig b/configs/trimslice_defconfig index d58dc10..51137c3 100644 --- a/configs/trimslice_defconfig +++ b/configs/trimslice_defconfig @@ -4,3 +4,8 @@ CONFIG_TEGRA20=y CONFIG_TARGET_TRIMSLICE=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-trimslice" CONFIG_CMD_NET=y +CONFIG_SPL_DM=y +CONFIG_SPI_FLASH=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/tseries_spi_defconfig b/configs/tseries_spi_defconfig index 06a296a..92d49eb 100644 --- a/configs/tseries_spi_defconfig +++ b/configs/tseries_spi_defconfig @@ -4,3 +4,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT" # CONFIG_CMD_CRC32 is not set CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/vct_platinum_defconfig b/configs/vct_platinum_defconfig index 217b1c1..89369e2 100644 --- a/configs/vct_platinum_defconfig +++ b/configs/vct_platinum_defconfig @@ -2,3 +2,4 @@ CONFIG_MIPS=y CONFIG_TARGET_VCT=y CONFIG_VCT_PLATINUM=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/vct_platinum_onenand_defconfig b/configs/vct_platinum_onenand_defconfig index 8b40d58..de10b76 100644 --- a/configs/vct_platinum_onenand_defconfig +++ b/configs/vct_platinum_onenand_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_VCT=y CONFIG_VCT_PLATINUM=y CONFIG_VCT_ONENAND=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/vct_platinum_onenand_small_defconfig b/configs/vct_platinum_onenand_small_defconfig index 4d82da9..053c825 100644 --- a/configs/vct_platinum_onenand_small_defconfig +++ b/configs/vct_platinum_onenand_small_defconfig @@ -4,3 +4,4 @@ CONFIG_VCT_PLATINUM=y CONFIG_VCT_ONENAND=y CONFIG_VCT_SMALL_IMAGE=y # CONFIG_CMD_CRC32 is not set +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/vct_platinum_small_defconfig b/configs/vct_platinum_small_defconfig index 5e1f4ab..69053fb 100644 --- a/configs/vct_platinum_small_defconfig +++ b/configs/vct_platinum_small_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_VCT=y CONFIG_VCT_PLATINUM=y CONFIG_VCT_SMALL_IMAGE=y # CONFIG_CMD_CRC32 is not set +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/vct_platinumavc_defconfig b/configs/vct_platinumavc_defconfig index 0a5748a..32685d5 100644 --- a/configs/vct_platinumavc_defconfig +++ b/configs/vct_platinumavc_defconfig @@ -1,3 +1,4 @@ CONFIG_MIPS=y CONFIG_TARGET_VCT=y CONFIG_VCT_PLATINUMAVC=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/vct_platinumavc_onenand_defconfig b/configs/vct_platinumavc_onenand_defconfig index 289f864..eebaf2c 100644 --- a/configs/vct_platinumavc_onenand_defconfig +++ b/configs/vct_platinumavc_onenand_defconfig @@ -2,3 +2,4 @@ CONFIG_MIPS=y CONFIG_TARGET_VCT=y CONFIG_VCT_PLATINUMAVC=y CONFIG_VCT_ONENAND=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/vct_platinumavc_onenand_small_defconfig b/configs/vct_platinumavc_onenand_small_defconfig index 1b28535..9a7cc94 100644 --- a/configs/vct_platinumavc_onenand_small_defconfig +++ b/configs/vct_platinumavc_onenand_small_defconfig @@ -4,3 +4,4 @@ CONFIG_VCT_PLATINUMAVC=y CONFIG_VCT_ONENAND=y CONFIG_VCT_SMALL_IMAGE=y # CONFIG_CMD_CRC32 is not set +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/vct_platinumavc_small_defconfig b/configs/vct_platinumavc_small_defconfig index 54813ca..3aba19d 100644 --- a/configs/vct_platinumavc_small_defconfig +++ b/configs/vct_platinumavc_small_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_VCT=y CONFIG_VCT_PLATINUMAVC=y CONFIG_VCT_SMALL_IMAGE=y # CONFIG_CMD_CRC32 is not set +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/vct_premium_defconfig b/configs/vct_premium_defconfig index 8cd8331..50108eb 100644 --- a/configs/vct_premium_defconfig +++ b/configs/vct_premium_defconfig @@ -2,3 +2,4 @@ CONFIG_MIPS=y CONFIG_TARGET_VCT=y CONFIG_VCT_PREMIUM=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/vct_premium_onenand_defconfig b/configs/vct_premium_onenand_defconfig index 5a269c6..1241630 100644 --- a/configs/vct_premium_onenand_defconfig +++ b/configs/vct_premium_onenand_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_VCT=y CONFIG_VCT_PREMIUM=y CONFIG_VCT_ONENAND=y CONFIG_CMD_NET=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/vct_premium_onenand_small_defconfig b/configs/vct_premium_onenand_small_defconfig index f592a62..46f3dc4 100644 --- a/configs/vct_premium_onenand_small_defconfig +++ b/configs/vct_premium_onenand_small_defconfig @@ -4,3 +4,4 @@ CONFIG_VCT_PREMIUM=y CONFIG_VCT_ONENAND=y CONFIG_VCT_SMALL_IMAGE=y # CONFIG_CMD_CRC32 is not set +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/vct_premium_small_defconfig b/configs/vct_premium_small_defconfig index 3fb5e69..ccd06c0 100644 --- a/configs/vct_premium_small_defconfig +++ b/configs/vct_premium_small_defconfig @@ -3,3 +3,4 @@ CONFIG_TARGET_VCT=y CONFIG_VCT_PREMIUM=y CONFIG_VCT_SMALL_IMAGE=y # CONFIG_CMD_CRC32 is not set +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/venice2_defconfig b/configs/venice2_defconfig index 31a0ce3..3fab99c 100644 --- a/configs/venice2_defconfig +++ b/configs/venice2_defconfig @@ -4,3 +4,8 @@ CONFIG_TEGRA124=y CONFIG_TARGET_VENICE2=y CONFIG_DEFAULT_DEVICE_TREE="tegra124-venice2" CONFIG_CMD_NET=y +CONFIG_SPL_DM=y +CONFIG_SPI_FLASH=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/ventana_defconfig b/configs/ventana_defconfig index 46dca48..0a6e10f 100644 --- a/configs/ventana_defconfig +++ b/configs/ventana_defconfig @@ -4,3 +4,7 @@ CONFIG_TEGRA20=y CONFIG_TARGET_VENTANA=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-ventana" CONFIG_CMD_NET=y +CONFIG_SPL_DM=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/vexpress_aemv8a_juno_defconfig b/configs/vexpress_aemv8a_juno_defconfig index 79a1291..cd1e6db 100644 --- a/configs/vexpress_aemv8a_juno_defconfig +++ b/configs/vexpress_aemv8a_juno_defconfig @@ -1,4 +1,7 @@ CONFIG_ARM=y CONFIG_TARGET_VEXPRESS64_JUNO=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_DEFAULT_DEVICE_TREE="vexpress64" CONFIG_CMD_NET=y +CONFIG_DM=y +CONFIG_DM_SERIAL=y diff --git a/configs/vexpress_aemv8a_semi_defconfig b/configs/vexpress_aemv8a_semi_defconfig index 21bfb4a..395ffa6 100644 --- a/configs/vexpress_aemv8a_semi_defconfig +++ b/configs/vexpress_aemv8a_semi_defconfig @@ -1,4 +1,7 @@ CONFIG_ARM=y CONFIG_TARGET_VEXPRESS64_BASE_FVP=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_DEFAULT_DEVICE_TREE="vexpress64" CONFIG_CMD_NET=y +CONFIG_DM=y +CONFIG_DM_SERIAL=y diff --git a/configs/vf610twr_defconfig b/configs/vf610twr_defconfig index b5d97c2..3955ee0 100644 --- a/configs/vf610twr_defconfig +++ b/configs/vf610twr_defconfig @@ -4,3 +4,4 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_I CONFIG_CMD_NET=y CONFIG_NAND_VF610_NFC=y CONFIG_SYS_NAND_BUSWIDTH_16BIT=y +CONFIG_SPI_FLASH=y diff --git a/configs/vf610twr_nand_defconfig b/configs/vf610twr_nand_defconfig index b054644..98f1aa7 100644 --- a/configs/vf610twr_nand_defconfig +++ b/configs/vf610twr_nand_defconfig @@ -4,3 +4,4 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_I CONFIG_CMD_NET=y CONFIG_NAND_VF610_NFC=y CONFIG_SYS_NAND_BUSWIDTH_16BIT=y +CONFIG_SPI_FLASH=y diff --git a/configs/vision2_defconfig b/configs/vision2_defconfig index 7bdfc8c..94df0d1 100644 --- a/configs/vision2_defconfig +++ b/configs/vision2_defconfig @@ -2,3 +2,4 @@ CONFIG_ARM=y CONFIG_TARGET_VISION2=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/ttcontrol/vision2/imximage_hynix.cfg" CONFIG_CMD_NET=y +CONFIG_SPI_FLASH=y diff --git a/configs/whistler_defconfig b/configs/whistler_defconfig index 7446a42..f7f822b 100644 --- a/configs/whistler_defconfig +++ b/configs/whistler_defconfig @@ -4,3 +4,7 @@ CONFIG_TEGRA20=y CONFIG_TARGET_WHISTLER=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-whistler" CONFIG_CMD_NET=y +CONFIG_SPL_DM=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/x600_defconfig b/configs/x600_defconfig index 8e22a18..f8b0340 100644 --- a/configs/x600_defconfig +++ b/configs/x600_defconfig @@ -1,9 +1,9 @@ CONFIG_ARM=y CONFIG_TARGET_X600=y -CONFIG_NETDEVICES=y -CONFIG_CMD_NET=y CONFIG_SPL=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_NET=y +CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/zmx25_defconfig b/configs/zmx25_defconfig index 259d4a9..a776f6a 100644 --- a/configs/zmx25_defconfig +++ b/configs/zmx25_defconfig @@ -1,7 +1,7 @@ CONFIG_ARM=y CONFIG_TARGET_ZMX25=y -CONFIG_CMD_NET=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="boot in %d s\n" CONFIG_AUTOBOOT_DELAY_STR="delaygs" CONFIG_AUTOBOOT_STOP_STR="stopgs" +CONFIG_CMD_NET=y diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig index 03f4bf7..a7307cf 100644 --- a/configs/zynq_microzed_defconfig +++ b/configs/zynq_microzed_defconfig @@ -4,9 +4,9 @@ CONFIG_TARGET_ZYNQ_MICROZED=y CONFIG_DEFAULT_DEVICE_TREE="zynq-microzed" # CONFIG_SYS_MALLOC_F is not set CONFIG_SPL=y -CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y CONFIG_CMD_NET=y CONFIG_OF_CONTROL=y +CONFIG_SPL_DISABLE_OF_CONTROL=y diff --git a/configs/zynq_zc70x_defconfig b/configs/zynq_zc70x_defconfig index 7377619..d3dce0f 100644 --- a/configs/zynq_zc70x_defconfig +++ b/configs/zynq_zc70x_defconfig @@ -1,7 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_ZYNQ=y CONFIG_TARGET_ZYNQ_ZC70X=y -CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="zynq-zc702" # CONFIG_SYS_MALLOC_F is not set CONFIG_SPL=y @@ -10,3 +9,4 @@ CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y CONFIG_CMD_NET=y CONFIG_OF_CONTROL=y +CONFIG_SPL_DISABLE_OF_CONTROL=y diff --git a/configs/zynq_zc770_xm010_defconfig b/configs/zynq_zc770_xm010_defconfig index c948ad7..69a1d8a 100644 --- a/configs/zynq_zc770_xm010_defconfig +++ b/configs/zynq_zc770_xm010_defconfig @@ -1,7 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_ZYNQ=y CONFIG_TARGET_ZYNQ_ZC770=y -CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm010" # CONFIG_SYS_MALLOC_F is not set CONFIG_SPL=y @@ -11,3 +10,5 @@ CONFIG_FIT_SIGNATURE=y CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM010" CONFIG_CMD_NET=y CONFIG_OF_CONTROL=y +CONFIG_SPL_DISABLE_OF_CONTROL=y +CONFIG_SPI_FLASH=y diff --git a/configs/zynq_zc770_xm012_defconfig b/configs/zynq_zc770_xm012_defconfig index 3429bf9..311d686 100644 --- a/configs/zynq_zc770_xm012_defconfig +++ b/configs/zynq_zc770_xm012_defconfig @@ -1,7 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_ZYNQ=y CONFIG_TARGET_ZYNQ_ZC770=y -CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm012" # CONFIG_SYS_MALLOC_F is not set CONFIG_SPL=y @@ -11,3 +10,4 @@ CONFIG_FIT_SIGNATURE=y CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM012" CONFIG_CMD_NET=y CONFIG_OF_CONTROL=y +CONFIG_SPL_DISABLE_OF_CONTROL=y diff --git a/configs/zynq_zc770_xm013_defconfig b/configs/zynq_zc770_xm013_defconfig index a435229..5c51c68 100644 --- a/configs/zynq_zc770_xm013_defconfig +++ b/configs/zynq_zc770_xm013_defconfig @@ -1,7 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_ZYNQ=y CONFIG_TARGET_ZYNQ_ZC770=y -CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm013" # CONFIG_SYS_MALLOC_F is not set CONFIG_SPL=y @@ -11,3 +10,4 @@ CONFIG_FIT_SIGNATURE=y CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM013" CONFIG_CMD_NET=y CONFIG_OF_CONTROL=y +CONFIG_SPL_DISABLE_OF_CONTROL=y diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig index 8f94d21..8637c0f 100644 --- a/configs/zynq_zed_defconfig +++ b/configs/zynq_zed_defconfig @@ -1,7 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_ZYNQ=y CONFIG_TARGET_ZYNQ_ZED=y -CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="zynq-zed" # CONFIG_SYS_MALLOC_F is not set CONFIG_SPL=y @@ -10,3 +9,4 @@ CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y CONFIG_CMD_NET=y CONFIG_OF_CONTROL=y +CONFIG_SPL_DISABLE_OF_CONTROL=y diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig index 1849c74..fcfd543 100644 --- a/configs/zynq_zybo_defconfig +++ b/configs/zynq_zybo_defconfig @@ -1,7 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_ZYNQ=y CONFIG_TARGET_ZYNQ_ZYBO=y -CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="zynq-zybo" # CONFIG_SYS_MALLOC_F is not set CONFIG_SPL=y @@ -10,3 +9,4 @@ CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y CONFIG_CMD_NET=y CONFIG_OF_CONTROL=y +CONFIG_SPL_DISABLE_OF_CONTROL=y diff --git a/drivers/Kconfig b/drivers/Kconfig index 1f40887..c7e526c 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -57,7 +57,7 @@ source "drivers/thermal/Kconfig" endmenu config PHYS_TO_BUS - bool + bool "Custom physical to bus address mapping" help Some SoCs use a different address map for CPU physical addresses and peripheral DMA master accesses. If yours does, select this option in diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 6b5aa1b..884e522 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -590,7 +590,6 @@ unsigned long get_board_ddr_clk(void); * eSPI - Enhanced SPI */ #define CONFIG_FSL_ESPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SST #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h index ec49796..e2ad557 100644 --- a/include/configs/BSC9131RDB.h +++ b/include/configs/BSC9131RDB.h @@ -279,7 +279,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_FSL_ESPI /* eSPI - Enhanced SPI */ #ifdef CONFIG_FSL_ESPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SPANSION #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index 65a7067..869c195 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -485,7 +485,6 @@ combinations. this should be removed later /* eSPI - Enhanced SPI */ #define CONFIG_FSL_ESPI /* SPI */ #ifdef CONFIG_FSL_ESPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SPANSION #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h index e737960..08aec84 100644 --- a/include/configs/C29XPCIE.h +++ b/include/configs/C29XPCIE.h @@ -432,7 +432,6 @@ /* eSPI - Enhanced SPI */ #define CONFIG_FSL_ESPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SPANSION #define CONFIG_SPI_FLASH_EON #define CONFIG_CMD_SF diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h index 04e52f2..fb5b4f5 100644 --- a/include/configs/M52277EVB.h +++ b/include/configs/M52277EVB.h @@ -140,7 +140,6 @@ #define CONFIG_SYS_SBFHDR_SIZE 0x7 #ifdef CONFIG_CMD_SPI # define CONFIG_SYS_DSPI_CS2 -# define CONFIG_SPI_FLASH # define CONFIG_SPI_FLASH_STMICRO # define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \ diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h index e40bbfd..271ea3d 100644 --- a/include/configs/M54418TWR.h +++ b/include/configs/M54418TWR.h @@ -204,7 +204,6 @@ #define CONFIG_HARD_SPI #define CONFIG_SYS_SBFHDR_SIZE 0x7 #ifdef CONFIG_CMD_SPI -# define CONFIG_SPI_FLASH # define CONFIG_SPI_FLASH_ATMEL # define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \ diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h index d26ad91..7a4a945 100644 --- a/include/configs/M54451EVB.h +++ b/include/configs/M54451EVB.h @@ -151,7 +151,6 @@ #define CONFIG_HARD_SPI #define CONFIG_SYS_SBFHDR_SIZE 0x7 #ifdef CONFIG_CMD_SPI -# define CONFIG_SPI_FLASH # define CONFIG_SPI_FLASH_STMICRO # define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \ diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index b735a26..f503744 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -182,7 +182,6 @@ #define CONFIG_HARD_SPI #define CONFIG_SYS_SBFHDR_SIZE 0x13 #ifdef CONFIG_CMD_SPI -# define CONFIG_SPI_FLASH # define CONFIG_SPI_FLASH_STMICRO # define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \ diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index 9b196ad..771ea1e 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -355,7 +355,6 @@ #ifdef CONFIG_MPC8XXX_SPI #define CONFIG_CMD_SPI #define CONFIG_USE_SPIFLASH -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SPANSION #define CONFIG_CMD_SF #endif diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index f57afff..30d8cdc 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -50,7 +50,6 @@ #define CONFIG_MPC8536DS 1 #define CONFIG_FSL_ELBC 1 /* Has Enhanced localbus controller */ -#define CONFIG_SPI_FLASH 1 /* Has SPI Flash */ #define CONFIG_PCI 1 /* Enable PCI/PCIE */ #define CONFIG_PCI1 1 /* Enable PCI controller 1 */ #define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 37bb42b..09e670f 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -680,7 +680,6 @@ extern unsigned long get_sdram_size(void); #if !defined(CONFIG_NAND) || !defined(CONFIG_NAND_SECBOOT) /* eSPI - Enhanced SPI */ #define CONFIG_FSL_ESPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SPANSION #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 0f5915d..78ce4c0 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -479,7 +479,6 @@ /* * eSPI - Enhanced SPI */ -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SPANSION #define CONFIG_HARD_SPI diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index c78a421..a510b4c 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -412,7 +412,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); * eSPI - Enhanced SPI */ #define CONFIG_FSL_ESPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SPANSION #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h index 0f8b614..2cad01c 100644 --- a/include/configs/T102xQDS.h +++ b/include/configs/T102xQDS.h @@ -581,7 +581,6 @@ unsigned long get_board_ddr_clk(void); * eSPI - Enhanced SPI */ #define CONFIG_FSL_ESPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO #ifndef CONFIG_SPL_BUILD #define CONFIG_SPI_FLASH_SST diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index 5ada99f..8430f97 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -575,7 +575,6 @@ unsigned long get_board_ddr_clk(void); * eSPI - Enhanced SPI */ #define CONFIG_FSL_ESPI -#define CONFIG_SPI_FLASH #if defined(CONFIG_T1024RDB) #define CONFIG_SPI_FLASH_STMICRO #elif defined(CONFIG_T1023RDB) diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 6cc4cdb..e28b8d5 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -486,7 +486,6 @@ unsigned long get_board_ddr_clk(void); * eSPI - Enhanced SPI */ #define CONFIG_FSL_ESPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_SPI_FLASH_SST #define CONFIG_SPI_FLASH_EON diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 262aeaf..7366457 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -516,7 +516,6 @@ * eSPI - Enhanced SPI */ #define CONFIG_FSL_ESPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_SPI_FLASH_BAR #define CONFIG_CMD_SF diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index e80b0b5..b2d2d83 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -15,7 +15,6 @@ #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ #define CONFIG_MMC -#define CONFIG_SPI_FLASH #define CONFIG_USB_EHCI #if defined(CONFIG_PPC_T2080) #define CONFIG_T2080QDS diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index c5db4f3..151007b 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -16,7 +16,6 @@ #define CONFIG_T2080RDB #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ #define CONFIG_MMC -#define CONFIG_SPI_FLASH #define CONFIG_USB_EHCI #define CONFIG_FSL_SATA_V2 diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index cfe6557..4edb3cb 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -402,7 +402,6 @@ unsigned long get_board_ddr_clk(void); * eSPI - Enhanced SPI */ #define CONFIG_FSL_ESPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SST #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index e38a6f7..b2207da 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -616,7 +616,6 @@ unsigned long get_board_ddr_clk(void); * eSPI - Enhanced SPI */ #define CONFIG_FSL_ESPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SST #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 diff --git a/include/configs/UCP1020.h b/include/configs/UCP1020.h index b9bbe34..bc2ca66 100644 --- a/include/configs/UCP1020.h +++ b/include/configs/UCP1020.h @@ -47,7 +47,6 @@ #define CONFIG_ETHPRIME "eTSEC3" #ifndef CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH y #endif #define CONFIG_SYS_REDUNDAND_ENVIRONMENT @@ -89,7 +88,6 @@ #define CONFIG_ETHPRIME "eTSEC1" #ifndef CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH y #endif #define CONFIG_SYS_REDUNDAND_ENVIRONMENT diff --git a/include/configs/alt.h b/include/configs/alt.h index 646cb61..524da42 100644 --- a/include/configs/alt.h +++ b/include/configs/alt.h @@ -43,7 +43,6 @@ #define CONFIG_SPI #define CONFIG_SPI_FLASH_BAR #define CONFIG_SH_QSPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SPANSION #define CONFIG_SPI_FLASH_QUAD #define CONFIG_SYS_NO_FLASH diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index a5f1f06..4961180 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -429,7 +429,6 @@ /* SPI flash. */ #define CONFIG_CMD_SF -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_WINBOND #define CONFIG_SF_DEFAULT_SPEED 24000000 diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 0526bd4..4ee7931 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -201,7 +201,6 @@ /* SPI */ #undef CONFIG_OMAP3_SPI #define CONFIG_TI_QSPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_MACRONIX #define CONFIG_CMD_SF #define CONFIG_CMD_SPI diff --git a/include/configs/aristainetos-common.h b/include/configs/aristainetos-common.h index eb50639..dd012f1 100644 --- a/include/configs/aristainetos-common.h +++ b/include/configs/aristainetos-common.h @@ -45,7 +45,6 @@ #define CONFIG_PHY_MICREL #define CONFIG_CMD_SF -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_MTD #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_MXC_SPI diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index c44da1c..aec91da 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -97,7 +97,6 @@ /* DataFlash */ #ifdef CONFIG_CMD_SF #define CONFIG_ATMEL_SPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_ATMEL #define CONFIG_SF_DEFAULT_SPEED 30000000 #define CONFIG_ENV_SPI_MODE SPI_MODE_3 diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 1a481b3..c241dac 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -97,7 +97,6 @@ /* DataFlash */ #ifdef CONFIG_CMD_SF #define CONFIG_ATMEL_SPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_ATMEL #define CONFIG_SF_DEFAULT_SPEED 30000000 #endif diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index c4a6952..ac59014 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -106,7 +106,6 @@ #define CONFIG_GENERIC_MMC #define CONFIG_ATMEL_SPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_ATMEL #define CONFIG_SYS_DCACHE_LINESZ 32 diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h index 868ec3a..77af772 100644 --- a/include/configs/atngw100mkii.h +++ b/include/configs/atngw100mkii.h @@ -125,7 +125,6 @@ #define CONFIG_GENERIC_MMC #define CONFIG_ATMEL_SPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_ATMEL #define CONFIG_SYS_DCACHE_LINESZ 32 diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h index 490c53e..2e118d8 100644 --- a/include/configs/bav335x.h +++ b/include/configs/bav335x.h @@ -579,7 +579,6 @@ DEFAULT_LINUX_BOOT_ENV \ /* SPI flash. */ #define CONFIG_CMD_SF -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_WINBOND #define CONFIG_SF_DEFAULT_SPEED 24000000 diff --git a/include/configs/beaver.h b/include/configs/beaver.h index 84541b9..c403729 100644 --- a/include/configs/beaver.h +++ b/include/configs/beaver.h @@ -55,7 +55,6 @@ /* SPI */ #define CONFIG_TEGRA20_SLINK #define CONFIG_TEGRA_SLINK_CTRLS 6 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_WINBOND #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 24000000 diff --git a/include/configs/bf506f-ezkit.h b/include/configs/bf506f-ezkit.h index 0b66cdb..dd6cb7a 100644 --- a/include/configs/bf506f-ezkit.h +++ b/include/configs/bf506f-ezkit.h @@ -74,7 +74,6 @@ #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 /* -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_CMD_SF #define CONFIG_CMD_SPI diff --git a/include/configs/bf518f-ezbrd.h b/include/configs/bf518f-ezbrd.h index 0df463f..b7ceba4 100644 --- a/include/configs/bf518f-ezbrd.h +++ b/include/configs/bf518f-ezbrd.h @@ -105,7 +105,6 @@ #define CONFIG_BFIN_SPI #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SST #define CONFIG_SPI_FLASH_STMICRO diff --git a/include/configs/bf525-ucr2.h b/include/configs/bf525-ucr2.h index 0ac3a09..d4f06f3 100644 --- a/include/configs/bf525-ucr2.h +++ b/include/configs/bf525-ucr2.h @@ -67,7 +67,6 @@ /* support for serial flash */ #define CONFIG_BFIN_SPI -#define CONFIG_SPI_FLASH #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_HZ 30000000 #define CONFIG_SPI_FLASH_EON diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h index 83f57cd..5767ac1 100644 --- a/include/configs/bf526-ezbrd.h +++ b/include/configs/bf526-ezbrd.h @@ -103,7 +103,6 @@ #define CONFIG_BFIN_SPI #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SST diff --git a/include/configs/bf527-ad7160-eval.h b/include/configs/bf527-ad7160-eval.h index c2958e8..1c5fc9e 100644 --- a/include/configs/bf527-ad7160-eval.h +++ b/include/configs/bf527-ad7160-eval.h @@ -89,7 +89,6 @@ #define CONFIG_BFIN_SPI #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h index 32ac961..28b3760 100644 --- a/include/configs/bf527-ezkit.h +++ b/include/configs/bf527-ezkit.h @@ -101,7 +101,6 @@ #define CONFIG_BFIN_SPI #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO diff --git a/include/configs/bf527-sdp.h b/include/configs/bf527-sdp.h index b374ab5..51814a6 100644 --- a/include/configs/bf527-sdp.h +++ b/include/configs/bf527-sdp.h @@ -77,7 +77,6 @@ #define CONFIG_BFIN_SPI #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_ALL diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h index 322705d..4876169 100644 --- a/include/configs/bf533-stamp.h +++ b/include/configs/bf533-stamp.h @@ -98,7 +98,6 @@ #define CONFIG_ENV_SPI_MAX_HZ 30000000 /* #define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_ALL */ diff --git a/include/configs/bf537-minotaur.h b/include/configs/bf537-minotaur.h index 53b7ab5..530763d 100644 --- a/include/configs/bf537-minotaur.h +++ b/include/configs/bf537-minotaur.h @@ -101,7 +101,6 @@ #define CONFIG_BFIN_SPI #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO diff --git a/include/configs/bf537-pnav.h b/include/configs/bf537-pnav.h index 850c516..e922bd5 100644 --- a/include/configs/bf537-pnav.h +++ b/include/configs/bf537-pnav.h @@ -82,7 +82,6 @@ #define CONFIG_BFIN_SPI #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO diff --git a/include/configs/bf537-srv1.h b/include/configs/bf537-srv1.h index 2da5d29..11338a5 100644 --- a/include/configs/bf537-srv1.h +++ b/include/configs/bf537-srv1.h @@ -100,7 +100,6 @@ #define CONFIG_BFIN_SPI #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index b5e59ff..f250cdb 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -84,7 +84,6 @@ #define CONFIG_BFIN_SPI #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_ALL diff --git a/include/configs/bf538f-ezkit.h b/include/configs/bf538f-ezkit.h index 3c82bf2..b1d4f26 100644 --- a/include/configs/bf538f-ezkit.h +++ b/include/configs/bf538f-ezkit.h @@ -83,7 +83,6 @@ #define CONFIG_ENV_SPI_MAX_HZ 30000000 /* #define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_ALL */ diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h index 53f6558..c7b44ae 100644 --- a/include/configs/bf548-ezkit.h +++ b/include/configs/bf548-ezkit.h @@ -92,7 +92,6 @@ #define CONFIG_BFIN_SPI #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO diff --git a/include/configs/bf561-acvilon.h b/include/configs/bf561-acvilon.h index 299c4c2..6d3f690 100644 --- a/include/configs/bf561-acvilon.h +++ b/include/configs/bf561-acvilon.h @@ -114,7 +114,6 @@ #define CONFIG_BFIN_SPI #define CONFIG_ENV_SPI_MAX_HZ 10000000 #define CONFIG_SF_DEFAULT_SPEED 10000000 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_ATMEL diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h index 73f3bfe..fc8378d 100644 --- a/include/configs/bf609-ezkit.h +++ b/include/configs/bf609-ezkit.h @@ -101,7 +101,6 @@ #define CONFIG_BFIN_SPI6XX #define CONFIG_ENV_SPI_MAX_HZ 25000000 #define CONFIG_SF_DEFAULT_SPEED 25000000 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_ALL /* diff --git a/include/configs/bg0900.h b/include/configs/bg0900.h index 7f364cd..99202b5 100644 --- a/include/configs/bg0900.h +++ b/include/configs/bg0900.h @@ -52,7 +52,6 @@ /* SPI FLASH */ #ifdef CONFIG_CMD_SF -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_BAR #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_SF_DEFAULT_BUS 2 diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h index ee526af..92bb573 100644 --- a/include/configs/blackstamp.h +++ b/include/configs/blackstamp.h @@ -219,7 +219,6 @@ /* For the M25P64 SCK Should be Kept < 15Mhz */ #define CONFIG_ENV_SPI_MAX_HZ 15000000 #define CONFIG_SF_DEFAULT_SPEED 15000000 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO /* diff --git a/include/configs/blackvme.h b/include/configs/blackvme.h index 27dccf6..ffa6969 100644 --- a/include/configs/blackvme.h +++ b/include/configs/blackvme.h @@ -142,7 +142,6 @@ #define CONFIG_ENV_SPI_MAX_HZ 15000000 #define CONFIG_SF_DEFAULT_SPEED 15000000 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO /* diff --git a/include/configs/br4.h b/include/configs/br4.h index a44c18c..cbef809 100644 --- a/include/configs/br4.h +++ b/include/configs/br4.h @@ -82,7 +82,6 @@ #define CONFIG_BFIN_SPI #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h index f8785db..7fa6fcc 100644 --- a/include/configs/cam_enc_4xx.h +++ b/include/configs/cam_enc_4xx.h @@ -75,7 +75,6 @@ /* SPI support */ #define CONFIG_SPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_DAVINCI_SPI #define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h index c76a426..96dfe07 100644 --- a/include/configs/cardhu.h +++ b/include/configs/cardhu.h @@ -58,7 +58,6 @@ /* SPI */ #define CONFIG_TEGRA20_SLINK #define CONFIG_TEGRA_SLINK_CTRLS 6 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_WINBOND #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 24000000 diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index a3908d0..3796374 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -167,7 +167,6 @@ /* SPI */ #define CONFIG_SPI #define CONFIG_MXC_SPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_ATMEL #define CONFIG_SPI_FLASH_EON #define CONFIG_SPI_FLASH_GIGADEVICE diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h index 9cab9fb..b3cb72c 100644 --- a/include/configs/controlcenterd.h +++ b/include/configs/controlcenterd.h @@ -219,7 +219,6 @@ #define CONFIG_HARD_SPI #define CONFIG_FSL_ESPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_CMD_SF diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index bf765af..cb063a4 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -408,7 +408,6 @@ * eSPI - Enhanced SPI */ #define CONFIG_FSL_ESPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SPANSION #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h index ab5226b..3505229 100644 --- a/include/configs/da830evm.h +++ b/include/configs/da830evm.h @@ -123,7 +123,6 @@ #define CONFIG_ENV_SECT_SIZE 4096 #define CONFIG_SYS_NO_FLASH #define CONFIG_SPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_WINBOND #define CONFIG_DAVINCI_SPI #define CONFIG_SYS_SPI_BASE DAVINCI_SPI0_BASE diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 37a485b..e9a144d 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -142,7 +142,6 @@ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ #define CONFIG_SPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_SPI_FLASH_WINBOND #define CONFIG_CMD_SF diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h index e702a50..89b6f23 100644 --- a/include/configs/dalmore.h +++ b/include/configs/dalmore.h @@ -53,7 +53,6 @@ /* SPI */ #define CONFIG_TEGRA114_SPI #define CONFIG_TEGRA114_SPI_CTRLS 6 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_WINBOND #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 24000000 diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 24fe123..63e22f1 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -123,7 +123,6 @@ /* SPI */ #undef CONFIG_OMAP3_SPI #define CONFIG_TI_QSPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SPANSION #define CONFIG_CMD_SF #define CONFIG_CMD_SPI diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h index ea6e5c0..5216cb5 100644 --- a/include/configs/dreamplug.h +++ b/include/configs/dreamplug.h @@ -73,7 +73,6 @@ #endif #ifdef CONFIG_CMD_SF -#define CONFIG_SPI_FLASH 1 #define CONFIG_HARD_SPI 1 #define CONFIG_KIRKWOOD_SPI 1 #define CONFIG_SPI_FLASH_MACRONIX 1 diff --git a/include/configs/ea20.h b/include/configs/ea20.h index 1e522c3..9370708 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -66,7 +66,6 @@ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ #define CONFIG_SPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_DAVINCI_SPI #define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h index 5dfd56c..f83449f 100644 --- a/include/configs/embestmx6boards.h +++ b/include/configs/embestmx6boards.h @@ -68,7 +68,6 @@ #define CONFIG_CMD_SF #ifdef CONFIG_CMD_SF -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SST #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index 2b638bf..c9dac4c 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -60,7 +60,6 @@ /* 512kB DataFlash at NPCS0 */ #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 #define CONFIG_HAS_DATAFLASH -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_ATMEL #define CONFIG_ATMEL_DATAFLASH_SPI #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 diff --git a/include/configs/gose.h b/include/configs/gose.h index 04f0383..f088649 100644 --- a/include/configs/gose.h +++ b/include/configs/gose.h @@ -44,7 +44,6 @@ #define CONFIG_SYS_NO_FLASH #define CONFIG_SPI #define CONFIG_SH_QSPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_BAR #define CONFIG_SPI_FLASH_SPANSION diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 6b8c82d..902ec2c 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -48,11 +48,8 @@ /* Driver Model */ #ifndef CONFIG_SPL_BUILD -#define CONFIG_DM #define CONFIG_DM_GPIO -#define CONFIG_DM_SERIAL #define CONFIG_DM_THERMAL -#define CONFIG_CMD_DM #endif /* GPIO */ diff --git a/include/configs/ima3-mx53.h b/include/configs/ima3-mx53.h index 71ca77a..081a054 100644 --- a/include/configs/ima3-mx53.h +++ b/include/configs/ima3-mx53.h @@ -63,7 +63,6 @@ #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0 /* SPI FLASH - not used for environment */ -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 25000000 diff --git a/include/configs/ip04.h b/include/configs/ip04.h index a6aed5d..dd2a618 100644 --- a/include/configs/ip04.h +++ b/include/configs/ip04.h @@ -91,7 +91,6 @@ #define CONFIG_BFIN_SPI #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_SPI_FLASH_WINBOND diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h index 606e6b4..3bbff28 100644 --- a/include/configs/jetson-tk1.h +++ b/include/configs/jetson-tk1.h @@ -43,7 +43,6 @@ /* SPI */ #define CONFIG_TEGRA114_SPI /* Compatible w/ Tegra114 SPI */ #define CONFIG_TEGRA114_SPI_CTRLS 6 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_WINBOND #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 24000000 diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index 2ed0855..851e269 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -253,7 +253,6 @@ int get_scl(void); #define CONFIG_SYS_REDUNDAND_ENVIRONMENT -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO /* SPI bus claim MPP configuration */ diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h index 686d2f3..ed942a0 100644 --- a/include/configs/km/kmp204x-common.h +++ b/include/configs/km/kmp204x-common.h @@ -299,7 +299,6 @@ int get_scl(void); * eSPI - Enhanced SPI */ #define CONFIG_FSL_ESPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_BAR /* 4 byte-addressing */ #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_SPI_FLASH_SPANSION diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h index 61c015f..ff948f9 100644 --- a/include/configs/koelsch.h +++ b/include/configs/koelsch.h @@ -44,7 +44,6 @@ #define CONFIG_SYS_NO_FLASH #define CONFIG_SPI #define CONFIG_SH_QSPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_BAR #define CONFIG_SPI_FLASH_SPANSION diff --git a/include/configs/ks2_evm.h b/include/configs/ks2_evm.h index 036f2cb..559446a 100644 --- a/include/configs/ks2_evm.h +++ b/include/configs/ks2_evm.h @@ -72,7 +72,6 @@ /* SPI Configuration */ #define CONFIG_SPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_DAVINCI_SPI #define CONFIG_CMD_SPI diff --git a/include/configs/lager.h b/include/configs/lager.h index f121b9c..546863e 100644 --- a/include/configs/lager.h +++ b/include/configs/lager.h @@ -44,7 +44,6 @@ #define CONFIG_SPI #define CONFIG_SPI_FLASH_BAR #define CONFIG_SH_QSPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SPANSION #define CONFIG_SYS_NO_FLASH diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index ca913b0..14c2393 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -417,7 +417,6 @@ unsigned long get_board_ddr_clk(void); #define FSL_QSPI_FLASH_NUM 2 #define CONFIG_CMD_SF -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SPANSION #endif diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 6b6f2ba..0748e61 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -260,7 +260,6 @@ #define FSL_QSPI_FLASH_NUM 2 #define CONFIG_CMD_SF -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO #endif diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index eba1b2f..ad7b996 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -127,7 +127,6 @@ /* SPI FLASH */ #ifdef CONFIG_CMD_SF -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_SF_DEFAULT_BUS 2 #define CONFIG_SF_DEFAULT_CS 0 diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index db463c0..faa13e3 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -176,7 +176,6 @@ # define CONFIG_SYS_SPI_BASE XILINX_SPI_FLASH_BASEADDR # define CONFIG_XILINX_SPI 1 # define CONFIG_SPI 1 -# define CONFIG_SPI_FLASH 1 # define CONFIG_SPI_FLASH_STMICRO 1 # define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 # define CONFIG_SF_DEFAULT_SPEED XILINX_SPI_FLASH_MAX_FREQ diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index 51436da..0d7b34b 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -121,7 +121,6 @@ * Common SPI Flash configuration */ #ifdef CONFIG_CMD_SF -#define CONFIG_SPI_FLASH 1 #define CONFIG_SPI_FLASH_MACRONIX 1 #endif diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index bc0ae28..976192f 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -130,7 +130,6 @@ /* SPI Flash */ #ifdef CONFIG_CMD_SF -#define CONFIG_SPI_FLASH #define CONFIG_SF_DEFAULT_BUS 2 #define CONFIG_SF_DEFAULT_CS 0 /* this may vary and depends on the installed chip */ diff --git a/include/configs/mx51_efikamx.h b/include/configs/mx51_efikamx.h index e3386ac..3f7e4bc 100644 --- a/include/configs/mx51_efikamx.h +++ b/include/configs/mx51_efikamx.h @@ -93,7 +93,6 @@ /* SPI FLASH */ #ifdef CONFIG_CMD_SF -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SST #define CONFIG_SF_DEFAULT_CS 1 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index c8c9f81..6c3c52e 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -44,7 +44,6 @@ #define CONFIG_CMD_SF #ifdef CONFIG_CMD_SF -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 4b5c637..a7da111 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -163,7 +163,6 @@ #define CONFIG_CMD_SF #ifdef CONFIG_CMD_SF -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index 63ec7c6..19f9e44 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -189,7 +189,6 @@ #ifdef CONFIG_FSL_QSPI #define CONFIG_CMD_SF -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_BAR #define CONFIG_SPI_FLASH_SPANSION #define CONFIG_SPI_FLASH_STMICRO diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index beaa119..67a3c97 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -36,7 +36,6 @@ #define CONFIG_CMD_SF #ifdef CONFIG_CMD_SF -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SST #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 diff --git a/include/configs/nyan-big.h b/include/configs/nyan-big.h index b99d762..dd549aa 100644 --- a/include/configs/nyan-big.h +++ b/include/configs/nyan-big.h @@ -55,7 +55,6 @@ /* SPI */ #define CONFIG_TEGRA114_SPI /* Compatible w/ Tegra114 SPI */ #define CONFIG_TEGRA114_SPI_CTRLS 6 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_WINBOND #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 24000000 diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index 91a7413..eb3184b 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -103,7 +103,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_SPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_SPI_FLASH_WINBOND #define CONFIG_DAVINCI_SPI diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h index 2bbf2b9..fb58acf 100644 --- a/include/configs/ot1200.h +++ b/include/configs/ot1200.h @@ -27,7 +27,6 @@ /* SF Configs */ #define CONFIG_CMD_SF #define CONFIG_SPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_SPI_FLASH_WINBOND #define CONFIG_SPI_FLASH_MACRONIX diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index b51379e..a585d70 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -41,7 +41,6 @@ #define CONFIG_BOARDNAME "P1020RDB-PC" #define CONFIG_NAND_FSL_ELBC #define CONFIG_P1020 -#define CONFIG_SPI_FLASH #define CONFIG_VSC7385_ENET #define CONFIG_SLIC #define __SW_BOOT_MASK 0x03 @@ -70,7 +69,6 @@ #define CONFIG_BOARDNAME "P1020RDB-PD" #define CONFIG_NAND_FSL_ELBC #define CONFIG_P1020 -#define CONFIG_SPI_FLASH #define CONFIG_VSC7385_ENET #define CONFIG_SLIC #define __SW_BOOT_MASK 0x03 @@ -97,7 +95,6 @@ #define CONFIG_NAND_FSL_ELBC #define CONFIG_P1021 #define CONFIG_QE -#define CONFIG_SPI_FLASH #define CONFIG_VSC7385_ENET #define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of addresses in the LBC */ @@ -133,7 +130,6 @@ #define CONFIG_NAND_FSL_ELBC #define CONFIG_P1024 #define CONFIG_SLIC -#define CONFIG_SPI_FLASH #define __SW_BOOT_MASK 0xf3 #define __SW_BOOT_NOR 0x00 #define __SW_BOOT_SPI 0x08 @@ -148,7 +144,6 @@ #define CONFIG_P1025 #define CONFIG_QE #define CONFIG_SLIC -#define CONFIG_SPI_FLASH #define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of addresses in the LBC */ @@ -164,7 +159,6 @@ #define CONFIG_BOARDNAME "P2020RDB-PCA" #define CONFIG_NAND_FSL_ELBC #define CONFIG_P2020 -#define CONFIG_SPI_FLASH #define CONFIG_VSC7385_ENET #define __SW_BOOT_MASK 0x03 #define __SW_BOOT_NOR 0xc8 diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h index 45c2df6..d80cf32 100644 --- a/include/configs/pcm051.h +++ b/include/configs/pcm051.h @@ -97,7 +97,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \ + (8 * 1024 * 1024)) -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_WINBOND #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 24000000 diff --git a/include/configs/peach-pi.h b/include/configs/peach-pi.h index e3cb09e..46699ff 100644 --- a/include/configs/peach-pi.h +++ b/include/configs/peach-pi.h @@ -10,7 +10,6 @@ #define __CONFIG_PEACH_PI_H #define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_SPI_FLASH #define CONFIG_ENV_SPI_BASE 0x12D30000 #define FLASH_SIZE (0x4 << 20) #define CONFIG_ENV_OFFSET (FLASH_SIZE - CONFIG_BL2_SIZE) diff --git a/include/configs/peach-pit.h b/include/configs/peach-pit.h index 3ee42ef..c5c9e3a 100644 --- a/include/configs/peach-pit.h +++ b/include/configs/peach-pit.h @@ -10,7 +10,6 @@ #define __CONFIG_PEACH_PIT_H #define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_SPI_FLASH #define CONFIG_ENV_SPI_BASE 0x12D30000 #define FLASH_SIZE (0x4 << 20) #define CONFIG_ENV_OFFSET (FLASH_SIZE - CONFIG_BL2_SIZE) diff --git a/include/configs/porter.h b/include/configs/porter.h index f85d39c..9367349 100644 --- a/include/configs/porter.h +++ b/include/configs/porter.h @@ -44,7 +44,6 @@ #define CONFIG_SPI #define CONFIG_SPI_FLASH_BAR #define CONFIG_SH_QSPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SPANSION #define CONFIG_SPI_FLASH_QUAD #define CONFIG_SYS_NO_FLASH diff --git a/include/configs/pr1.h b/include/configs/pr1.h index b9253b9..3e4aab4 100644 --- a/include/configs/pr1.h +++ b/include/configs/pr1.h @@ -83,7 +83,6 @@ #define CONFIG_BFIN_SPI #define CONFIG_ENV_SPI_MAX_HZ 30000000 #define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index d933a9e..046891e 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -78,7 +78,6 @@ #ifdef CONFIG_CMD_SF #define CONFIG_ATMEL_SPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_ATMEL #define CONFIG_SF_DEFAULT_SPEED 30000000 #endif diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index 5fb621e..e06dfc9 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -40,7 +40,6 @@ #ifdef CONFIG_CMD_SF #define CONFIG_ATMEL_SPI #define CONFIG_ATMEL_SPI0 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_ATMEL #define CONFIG_SF_DEFAULT_BUS 0 #define CONFIG_SF_DEFAULT_CS 0 diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index 546d7a3..eadccc1 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -40,7 +40,6 @@ #ifdef CONFIG_CMD_SF #define CONFIG_ATMEL_SPI #define CONFIG_ATMEL_SPI0 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_ATMEL #define CONFIG_SF_DEFAULT_BUS 0 #define CONFIG_SF_DEFAULT_CS 0 diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 3caa83c..01b9ddf 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -81,7 +81,6 @@ #define CONFIG_CMD_SF #define CONFIG_CMD_SF_TEST #define CONFIG_CMD_SPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_ATMEL #define CONFIG_SPI_FLASH_EON #define CONFIG_SPI_FLASH_GIGADEVICE diff --git a/include/configs/sh7752evb.h b/include/configs/sh7752evb.h index d7bc751..7e8565d 100644 --- a/include/configs/sh7752evb.h +++ b/include/configs/sh7752evb.h @@ -102,7 +102,6 @@ /* SPI */ #define CONFIG_SH_SPI 1 #define CONFIG_SH_SPI_BASE 0xfe002000 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO 1 #define CONFIG_SPI_FLASH_MACRONIX 1 diff --git a/include/configs/sh7753evb.h b/include/configs/sh7753evb.h index 2124e0f..857b26f 100644 --- a/include/configs/sh7753evb.h +++ b/include/configs/sh7753evb.h @@ -102,7 +102,6 @@ /* SPI */ #define CONFIG_SH_SPI 1 #define CONFIG_SH_SPI_BASE 0xfe002000 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO 1 #define CONFIG_SPI_FLASH_MACRONIX 1 diff --git a/include/configs/sh7757lcr.h b/include/configs/sh7757lcr.h index fd6a1df..18569bd 100644 --- a/include/configs/sh7757lcr.h +++ b/include/configs/sh7757lcr.h @@ -103,7 +103,6 @@ /* SPI */ #define CONFIG_SH_SPI 1 #define CONFIG_SH_SPI_BASE 0xfe002000 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO 1 /* MMCIF */ diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index ac4cf68..b61f6a0 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -102,7 +102,6 @@ #define CONFIG_SPI #define CONFIG_OMAP3_SPI #define CONFIG_MTD_DEVICE -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_WINBOND #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED (75000000) diff --git a/include/configs/silk.h b/include/configs/silk.h index ccfcede..b105f5a 100644 --- a/include/configs/silk.h +++ b/include/configs/silk.h @@ -44,7 +44,6 @@ #define CONFIG_SPI #define CONFIG_SPI_FLASH_BAR #define CONFIG_SH_QSPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SPANSION #define CONFIG_SPI_FLASH_QUAD #define CONFIG_SYS_NO_FLASH diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h index 08381e3..e5655fc 100644 --- a/include/configs/smdk5250.h +++ b/include/configs/smdk5250.h @@ -10,7 +10,6 @@ #define __CONFIG_SMDK_H #define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_SPI_FLASH #define CONFIG_ENV_SPI_BASE 0x12D30000 #define FLASH_SIZE (0x4 << 20) #define CONFIG_ENV_OFFSET (FLASH_SIZE - CONFIG_BL2_SIZE) diff --git a/include/configs/smdk5420.h b/include/configs/smdk5420.h index 61f582f..607877c 100644 --- a/include/configs/smdk5420.h +++ b/include/configs/smdk5420.h @@ -10,7 +10,6 @@ #define __CONFIG_SMDK5420_H #define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_SPI_FLASH #define CONFIG_ENV_SPI_BASE 0x12D30000 #define FLASH_SIZE (0x4 << 20) #define CONFIG_ENV_OFFSET (FLASH_SIZE - CONFIG_BL2_SIZE) diff --git a/include/configs/snow.h b/include/configs/snow.h index a2fb3f9..557f86c 100644 --- a/include/configs/snow.h +++ b/include/configs/snow.h @@ -10,7 +10,6 @@ #define __CONFIG_SNOW_H #define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_SPI_FLASH #define CONFIG_ENV_SPI_BASE 0x12D30000 #define FLASH_SIZE (0x4 << 20) #define CONFIG_ENV_OFFSET (FLASH_SIZE - CONFIG_BL2_SIZE) diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 5ba2f6a..4c3366a 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -81,7 +81,6 @@ #define CONFIG_CMD_SPI #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_SPI_FLASH_BAR /* @@ -187,7 +186,6 @@ unsigned int cm_get_l4_sp_clk_hz(void); #ifdef CONFIG_OF_CONTROL /* QSPI is controlled via DT */ #define CONFIG_CADENCE_QSPI /* Enable multiple SPI NOR flash manufacturers */ -#define CONFIG_SPI_FLASH /* SPI flash subsystem */ #define CONFIG_SPI_FLASH_STMICRO /* Micron/Numonyx flash */ #define CONFIG_SPI_FLASH_SPANSION /* Spansion flash */ #define CONFIG_SPI_FLASH_MTD diff --git a/include/configs/taurus.h b/include/configs/taurus.h index 2cf4558..cce4b7d 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -139,7 +139,6 @@ #define CONFIG_SPI #define CONFIG_CMD_SPI #define CONFIG_CMD_SF -#define CONFIG_SPI_FLASH #define CONFIG_ATMEL_SPI #define CONFIG_SPI_FLASH_STMICRO #define TAURUS_SPI_MASK (1 << 4) diff --git a/include/configs/tec-ng.h b/include/configs/tec-ng.h index cfee2c3..fa651c1 100644 --- a/include/configs/tec-ng.h +++ b/include/configs/tec-ng.h @@ -38,7 +38,6 @@ /* SPI */ #define CONFIG_TEGRA20_SLINK #define CONFIG_TEGRA_SLINK_CTRLS 6 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_WINBOND #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 24000000 diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h index 00294f6..52d5ae6 100644 --- a/include/configs/tqma6.h +++ b/include/configs/tqma6.h @@ -47,7 +47,6 @@ #define CONFIG_MXC_SPI /* SPI Flash */ -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO #define TQMA6_SPI_FLASH_SECTOR_SIZE SZ_64K diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h index 848ef33..2db38e5 100644 --- a/include/configs/trimslice.h +++ b/include/configs/trimslice.h @@ -24,7 +24,6 @@ /* SPI */ #define CONFIG_TEGRA20_SFLASH -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_WINBOND #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_CMD_SPI diff --git a/include/configs/tseries.h b/include/configs/tseries.h index cd8ba2b..6a1835e 100644 --- a/include/configs/tseries.h +++ b/include/configs/tseries.h @@ -266,7 +266,6 @@ MMCARGS #define CONFIG_OMAP3_SPI #define CONFIG_CMD_SPI #define CONFIG_CMD_SF -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_SF_DEFAULT_SPEED 24000000 diff --git a/include/configs/venice2.h b/include/configs/venice2.h index bfe5298..1d9d053 100644 --- a/include/configs/venice2.h +++ b/include/configs/venice2.h @@ -40,7 +40,6 @@ /* SPI */ #define CONFIG_TEGRA114_SPI /* Compatible w/ Tegra114 SPI */ #define CONFIG_TEGRA114_SPI_CTRLS 6 -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_WINBOND #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 24000000 diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index b81dfce..0c86779 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -10,7 +10,6 @@ /* We use generic board and device manager for v8 Versatile Express */ #define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_DM #ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP #ifndef CONFIG_SEMIHOSTING @@ -114,7 +113,6 @@ #endif /* !CONFIG_GICV3 */ /* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_F_LEN 0x2000 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (8 << 20)) /* Ethernet Configuration */ @@ -130,7 +128,6 @@ #endif /* PL011 Serial Configuration */ -#define CONFIG_DM_SERIAL #define CONFIG_BAUDRATE 115200 #define CONFIG_CONS_INDEX 0 #define CONFIG_PL01X_SERIAL diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index dde65ed..dfe316a 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -103,7 +103,6 @@ #ifdef CONFIG_FSL_QSPI #define CONFIG_CMD_SF -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SPANSION #define FSL_QSPI_FLASH_SIZE (1 << 24) #define FSL_QSPI_FLASH_NUM 2 diff --git a/include/configs/vision2.h b/include/configs/vision2.h index 41680c4..07cd72c 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -50,7 +50,6 @@ #define CONFIG_FSL_SF #define CONFIG_CMD_SF -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO /* diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index 1917d87..0481cf3 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -192,7 +192,6 @@ * FLASH configuration */ #define CONFIG_ICH_SPI -#define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_MACRONIX #define CONFIG_SPI_FLASH_WINBOND #define CONFIG_SPI_FLASH_GIGADEVICE diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 880d29c..ff419c3 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -76,7 +76,6 @@ /* SPI */ #ifdef CONFIG_ZYNQ_SPI -# define CONFIG_SPI_FLASH # define CONFIG_SPI_FLASH_SST # define CONFIG_CMD_SF #endif diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 1a52e7d..c7b3058 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -68,7 +68,6 @@ /* SPI */ #ifdef CONFIG_ZYNQ_SPI -# define CONFIG_SPI_FLASH # define CONFIG_SPI_FLASH_SST # define CONFIG_CMD_SF #endif -- cgit v0.10.2 From ef0f2f57524ec85fb9058a23298f2c4995e0d950 Mon Sep 17 00:00:00 2001 From: Joe Hershberger Date: Mon, 22 Jun 2015 16:15:30 -0500 Subject: Move defaults from config_cmd_default.h to Kconfig This sets the default commands Kconfig to match include/config_cmd_default.h commands in the common/Kconfig and removes them from include/configs. Signed-off-by: Joe Hershberger [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates] Signed-off-by: Tom Rini diff --git a/README b/README index c3fa549..8109e5d 100644 --- a/README +++ b/README @@ -1048,9 +1048,7 @@ The following options need to be configured: Monitor commands can be included or excluded from the build by using the #include files and #undef'ing unwanted - commands, or using - and augmenting with additional #define's - for wanted commands. + commands, or adding #define's for wanted commands. The default command configuration includes all commands except those marked below with a "*". diff --git a/common/Kconfig b/common/Kconfig index cb14592..2976cd7 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -101,11 +101,13 @@ menu "Info commands" config CMD_BDI bool "bdinfo" + default y help Print board info config CMD_CONSOLE bool "coninfo" + default y help Print console devices and information. @@ -128,6 +130,7 @@ menu "Boot commands" config CMD_BOOTD bool "bootd" + default y help Run the command stored in the environment "bootcmd", i.e. "bootd" does the same thing as "run bootcmd". @@ -146,21 +149,25 @@ config CMD_GO config CMD_RUN bool "run" + default y help Run the command in the given environment variable. config CMD_IMI bool "iminfo" + default y help Print header information for application image. config CMD_IMLS bool "imls" + default y help List all images found in flash config CMD_XIMG bool "imxtract" + default y help Extract a part of a multi-image. @@ -182,17 +189,20 @@ config CMD_IMPORTENV config CMD_EDITENV bool "editenv" + default y help Edit environment variable. config CMD_SAVEENV bool "saveenv" + default y help Save all environment variables into the compiled-in persistent storage. config CMD_ENV_EXISTS bool "env exists" + default y help Check if a variable is defined in the environment for use in shell scripting. @@ -203,6 +213,7 @@ menu "Memory commands" config CMD_MEMORY bool "md, mm, nm, mw, cp, cmp, base, loop" + default y help Memeory commands. md - memory display @@ -270,16 +281,19 @@ config CMD_DEMO config CMD_LOADB bool "loadb" + default y help Load a binary file over serial line. config CMD_LOADS bool "loads" + default y help Load an S-Record file over serial line config CMD_FLASH bool "flinfo, erase, protect" + default y help NOR flash support. flinfo - print FLASH memory information @@ -314,6 +328,7 @@ config CMD_USB config CMD_FPGA bool "fpga" + default y help FPGA support. @@ -324,21 +339,25 @@ menu "Shell scripting commands" config CMD_ECHO bool "echo" + default y help Echo args to console config CMD_ITEST bool "itest" + default y help Return true/false on integer compare. config CMD_SOURCE bool "source" + default y help Run script from memory config CMD_SETEXPR bool "setexpr" + default y help Evaluate boolean and math expressions and store the result in an env variable. @@ -352,6 +371,7 @@ menu "Network commands" config CMD_NET bool "bootp, tftpboot" select NET + default y help Network commands. bootp - boot image via network using BOOTP/TFTP protocol @@ -379,6 +399,7 @@ config CMD_DHCP config CMD_NFS bool "nfs" + default y help Boot image via network using NFS protocol. @@ -419,6 +440,7 @@ config CMD_TIME # TODO: rename to CMD_SLEEP config CMD_MISC bool "sleep" + default y help Delay execution for some time @@ -430,6 +452,7 @@ config CMD_TIMER config CMD_SETGETDCR bool "getdcr, setdcr, getidcr, setidcr" depends on 4xx + default y help getdcr - Get an AMCC PPC 4xx DCR's value setdcr - Set an AMCC PPC 4xx DCR's value diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig index 572adb8..87ade90 100644 --- a/configs/A10-OLinuXino-Lime_defconfig +++ b/configs/A10-OLinuXino-Lime_defconfig @@ -8,10 +8,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig index a24826b..5a450af 100644 --- a/configs/A10s-OLinuXino-M_defconfig +++ b/configs/A10s-OLinuXino-M_defconfig @@ -10,10 +10,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-olinuxino-micro" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,SUNXI_EMAC,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig index 085bd38..213ece6 100644 --- a/configs/A13-OLinuXinoM_defconfig +++ b/configs/A13-OLinuXinoM_defconfig @@ -14,10 +14,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino-micro" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig index 4535ce4..d71c11c 100644 --- a/configs/A13-OLinuXino_defconfig +++ b/configs/A13-OLinuXino_defconfig @@ -15,10 +15,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig index 7c4e005..6445b25 100644 --- a/configs/A20-OLinuXino-Lime2_defconfig +++ b/configs/A20-OLinuXino-Lime2_defconfig @@ -9,10 +9,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_DM_SERIAL=y CONFIG_USB=y diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig index c875130..650670f 100644 --- a/configs/A20-OLinuXino-Lime_defconfig +++ b/configs/A20-OLinuXino-Lime_defconfig @@ -6,10 +6,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_DM_SERIAL=y CONFIG_USB=y diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig index 315c7f6..3f92504 100644 --- a/configs/A20-OLinuXino_MICRO_defconfig +++ b/configs/A20-OLinuXino_MICRO_defconfig @@ -10,10 +10,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_DM_SERIAL=y CONFIG_USB=y diff --git a/configs/Ainol_AW1_defconfig b/configs/Ainol_AW1_defconfig index 1f7f891..f94cd5a 100644 --- a/configs/Ainol_AW1_defconfig +++ b/configs/Ainol_AW1_defconfig @@ -16,8 +16,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-ainol-aw1" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y diff --git a/configs/Ampe_A76_defconfig b/configs/Ampe_A76_defconfig index f20cad8..99aa141 100644 --- a/configs/Ampe_A76_defconfig +++ b/configs/Ampe_A76_defconfig @@ -15,8 +15,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-ampe-a76" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y diff --git a/configs/Auxtek-T004_defconfig b/configs/Auxtek-T004_defconfig index 7203e01..016ccd9 100644 --- a/configs/Auxtek-T004_defconfig +++ b/configs/Auxtek-T004_defconfig @@ -7,10 +7,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t004" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/B4420QDS_NAND_defconfig b/configs/B4420QDS_NAND_defconfig index 4f53a9e..0313e55 100644 --- a/configs/B4420QDS_NAND_defconfig +++ b/configs/B4420QDS_NAND_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_B4860QDS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_B4420,RAMBOOT_PBL,SPL_FSL_PBL,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/B4420QDS_SPIFLASH_defconfig b/configs/B4420QDS_SPIFLASH_defconfig index 04d5ce3..6352ef9 100644 --- a/configs/B4420QDS_SPIFLASH_defconfig +++ b/configs/B4420QDS_SPIFLASH_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_B4860QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_B4420,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/B4420QDS_defconfig b/configs/B4420QDS_defconfig index d4b95c5..3b449de 100644 --- a/configs/B4420QDS_defconfig +++ b/configs/B4420QDS_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_B4860QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_B4420" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/B4860QDS_NAND_defconfig b/configs/B4860QDS_NAND_defconfig index af5e938..afa0600 100644 --- a/configs/B4860QDS_NAND_defconfig +++ b/configs/B4860QDS_NAND_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_B4860QDS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,RAMBOOT_PBL,SPL_FSL_PBL,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/B4860QDS_SECURE_BOOT_defconfig b/configs/B4860QDS_SECURE_BOOT_defconfig index f464d18..a335ad3 100644 --- a/configs/B4860QDS_SECURE_BOOT_defconfig +++ b/configs/B4860QDS_SECURE_BOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_B4860QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/B4860QDS_SPIFLASH_defconfig b/configs/B4860QDS_SPIFLASH_defconfig index 28157a3..18c3d94 100644 --- a/configs/B4860QDS_SPIFLASH_defconfig +++ b/configs/B4860QDS_SPIFLASH_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_B4860QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/B4860QDS_SRIO_PCIE_BOOT_defconfig b/configs/B4860QDS_SRIO_PCIE_BOOT_defconfig index e56d265..01229cc 100644 --- a/configs/B4860QDS_SRIO_PCIE_BOOT_defconfig +++ b/configs/B4860QDS_SRIO_PCIE_BOOT_defconfig @@ -2,6 +2,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_B4860QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/B4860QDS_defconfig b/configs/B4860QDS_defconfig index a4c2eb6..8f300c0 100644 --- a/configs/B4860QDS_defconfig +++ b/configs/B4860QDS_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_B4860QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/BSC9131RDB_NAND_SYSCLK100_defconfig b/configs/BSC9131RDB_NAND_SYSCLK100_defconfig index 36b9a1f..90aa865 100644 --- a/configs/BSC9131RDB_NAND_SYSCLK100_defconfig +++ b/configs/BSC9131RDB_NAND_SYSCLK100_defconfig @@ -3,6 +3,6 @@ CONFIG_MPC85xx=y CONFIG_TARGET_BSC9131RDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,NAND,SYS_CLK_100" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/BSC9131RDB_NAND_defconfig b/configs/BSC9131RDB_NAND_defconfig index 8fdc41d..9cd68f0 100644 --- a/configs/BSC9131RDB_NAND_defconfig +++ b/configs/BSC9131RDB_NAND_defconfig @@ -3,6 +3,6 @@ CONFIG_MPC85xx=y CONFIG_TARGET_BSC9131RDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/BSC9131RDB_SPIFLASH_SYSCLK100_defconfig b/configs/BSC9131RDB_SPIFLASH_SYSCLK100_defconfig index abdf794..d90d7a0 100644 --- a/configs/BSC9131RDB_SPIFLASH_SYSCLK100_defconfig +++ b/configs/BSC9131RDB_SPIFLASH_SYSCLK100_defconfig @@ -2,6 +2,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9131RDB=y CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,SPIFLASH,SYS_CLK_100" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/BSC9131RDB_SPIFLASH_defconfig b/configs/BSC9131RDB_SPIFLASH_defconfig index 8cfe843..4ba8d62 100644 --- a/configs/BSC9131RDB_SPIFLASH_defconfig +++ b/configs/BSC9131RDB_SPIFLASH_defconfig @@ -2,6 +2,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9131RDB=y CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,SPIFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig b/configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig index d6e3fbe..b0153c4 100644 --- a/configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig +++ b/configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND_SECBOOT,SYS_CLK_100_DDR_100,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_NAND_DDRCLK100_defconfig b/configs/BSC9132QDS_NAND_DDRCLK100_defconfig index 5c5b412..066e6f7 100644 --- a/configs/BSC9132QDS_NAND_DDRCLK100_defconfig +++ b/configs/BSC9132QDS_NAND_DDRCLK100_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND,SYS_CLK_100_DDR_100" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig b/configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig index 3e82751..31bcec4 100644 --- a/configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig +++ b/configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND_SECBOOT,SYS_CLK_100_DDR_133,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_NAND_DDRCLK133_defconfig b/configs/BSC9132QDS_NAND_DDRCLK133_defconfig index e57d006..64952a0 100644 --- a/configs/BSC9132QDS_NAND_DDRCLK133_defconfig +++ b/configs/BSC9132QDS_NAND_DDRCLK133_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND,SYS_CLK_100_DDR_133" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig b/configs/BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig index 79e3946..b5759fb 100644 --- a/configs/BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig +++ b/configs/BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SYS_CLK_100_DDR_100,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_NOR_DDRCLK100_defconfig b/configs/BSC9132QDS_NOR_DDRCLK100_defconfig index 2e4b37d..9f30977 100644 --- a/configs/BSC9132QDS_NOR_DDRCLK100_defconfig +++ b/configs/BSC9132QDS_NOR_DDRCLK100_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SYS_CLK_100_DDR_100" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig b/configs/BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig index bb45b73..7becdfe 100644 --- a/configs/BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig +++ b/configs/BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SYS_CLK_100_DDR_133,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_NOR_DDRCLK133_defconfig b/configs/BSC9132QDS_NOR_DDRCLK133_defconfig index 48a9849..770c723 100644 --- a/configs/BSC9132QDS_NOR_DDRCLK133_defconfig +++ b/configs/BSC9132QDS_NOR_DDRCLK133_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SYS_CLK_100_DDR_133" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_SDCARD_DDRCLK100_SECURE_defconfig b/configs/BSC9132QDS_SDCARD_DDRCLK100_SECURE_defconfig index 71f7d69..5b84924 100644 --- a/configs/BSC9132QDS_SDCARD_DDRCLK100_SECURE_defconfig +++ b/configs/BSC9132QDS_SDCARD_DDRCLK100_SECURE_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SDCARD,SYS_CLK_100_DDR_100,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_SDCARD_DDRCLK100_defconfig b/configs/BSC9132QDS_SDCARD_DDRCLK100_defconfig index 3a424d7..365d13e 100644 --- a/configs/BSC9132QDS_SDCARD_DDRCLK100_defconfig +++ b/configs/BSC9132QDS_SDCARD_DDRCLK100_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SDCARD,SYS_CLK_100_DDR_100" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_SDCARD_DDRCLK133_SECURE_defconfig b/configs/BSC9132QDS_SDCARD_DDRCLK133_SECURE_defconfig index d1668f1..d9e021a 100644 --- a/configs/BSC9132QDS_SDCARD_DDRCLK133_SECURE_defconfig +++ b/configs/BSC9132QDS_SDCARD_DDRCLK133_SECURE_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SDCARD,SYS_CLK_100_DDR_133,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_SDCARD_DDRCLK133_defconfig b/configs/BSC9132QDS_SDCARD_DDRCLK133_defconfig index 63d59d1..2f52320 100644 --- a/configs/BSC9132QDS_SDCARD_DDRCLK133_defconfig +++ b/configs/BSC9132QDS_SDCARD_DDRCLK133_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SDCARD,SYS_CLK_100_DDR_133" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig b/configs/BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig index e98df30..bea9e23 100644 --- a/configs/BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig +++ b/configs/BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_100,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_SPIFLASH_DDRCLK100_defconfig b/configs/BSC9132QDS_SPIFLASH_DDRCLK100_defconfig index 28ded86..1f7557a 100644 --- a/configs/BSC9132QDS_SPIFLASH_DDRCLK100_defconfig +++ b/configs/BSC9132QDS_SPIFLASH_DDRCLK100_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_100" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig b/configs/BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig index 89a940a..933ef77 100644 --- a/configs/BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig +++ b/configs/BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_133,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/BSC9132QDS_SPIFLASH_DDRCLK133_defconfig b/configs/BSC9132QDS_SPIFLASH_DDRCLK133_defconfig index 449ca4f..3cbe89b 100644 --- a/configs/BSC9132QDS_SPIFLASH_DDRCLK133_defconfig +++ b/configs/BSC9132QDS_SPIFLASH_DDRCLK133_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_133" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig index 4b6bc20..3e186f6 100644 --- a/configs/Bananapi_defconfig +++ b/configs/Bananapi_defconfig @@ -7,10 +7,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_DM_SERIAL=y CONFIG_USB=y diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig index 8833d1b..5bd2fd6 100644 --- a/configs/Bananapro_defconfig +++ b/configs/Bananapro_defconfig @@ -9,10 +9,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapro" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_DM_SERIAL=y CONFIG_USB=y diff --git a/configs/C29XPCIE_NAND_defconfig b/configs/C29XPCIE_NAND_defconfig index 5a993b7..c6f0ae4 100644 --- a/configs/C29XPCIE_NAND_defconfig +++ b/configs/C29XPCIE_NAND_defconfig @@ -4,6 +4,4 @@ CONFIG_TARGET_C29XPCIE=y CONFIG_SPL=y CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/C29XPCIE_NOR_SECBOOT_defconfig b/configs/C29XPCIE_NOR_SECBOOT_defconfig index eb43932..6c982dd 100644 --- a/configs/C29XPCIE_NOR_SECBOOT_defconfig +++ b/configs/C29XPCIE_NOR_SECBOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_C29XPCIE=y CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig b/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig index 20ea17e..e95ff0a 100644 --- a/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig +++ b/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_C29XPCIE=y CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,SPIFLASH,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/C29XPCIE_SPIFLASH_defconfig b/configs/C29XPCIE_SPIFLASH_defconfig index ea7b9b0..29889ea 100644 --- a/configs/C29XPCIE_SPIFLASH_defconfig +++ b/configs/C29XPCIE_SPIFLASH_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_C29XPCIE=y CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,SPIFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/C29XPCIE_defconfig b/configs/C29XPCIE_defconfig index 7894a47..20bbe81 100644 --- a/configs/C29XPCIE_defconfig +++ b/configs/C29XPCIE_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_C29XPCIE=y CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/CPCI2DP_defconfig b/configs/CPCI2DP_defconfig index 23631e9..9f98014 100644 --- a/configs/CPCI2DP_defconfig +++ b/configs/CPCI2DP_defconfig @@ -1,3 +1,6 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_CPCI2DP=y +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/CPCI4052_defconfig b/configs/CPCI4052_defconfig index 5ac0170..c4fac41 100644 --- a/configs/CPCI4052_defconfig +++ b/configs/CPCI4052_defconfig @@ -4,4 +4,4 @@ CONFIG_TARGET_CPCI4052=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig index 184cdeb..54f4846 100644 --- a/configs/CSQ_CS908_defconfig +++ b/configs/CSQ_CS908_defconfig @@ -8,10 +8,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-cs908" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_DM_SERIAL=y CONFIG_AXP221_DLDO1_VOLT=3300 diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig index 5895b7e..3a2a219 100644 --- a/configs/Chuwi_V7_CW0825_defconfig +++ b/configs/Chuwi_V7_CW0825_defconfig @@ -15,10 +15,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-chuwi-v7-cw0825" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_VIDEO_LCD_SPI_CS="PA0" CONFIG_VIDEO_LCD_SPI_SCLK="PA1" diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig index 6a64568..9d84901 100644 --- a/configs/Colombus_defconfig +++ b/configs/Colombus_defconfig @@ -8,10 +8,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-colombus" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_DM_SERIAL=y CONFIG_AXP221_ALDO1_VOLT=3300 diff --git a/configs/Cubieboard2_defconfig b/configs/Cubieboard2_defconfig index 653ec9a..0fbaa23 100644 --- a/configs/Cubieboard2_defconfig +++ b/configs/Cubieboard2_defconfig @@ -7,10 +7,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubieboard2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_DM_SERIAL=y CONFIG_USB=y diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig index 7786cac..0d0051e 100644 --- a/configs/Cubieboard_defconfig +++ b/configs/Cubieboard_defconfig @@ -6,10 +6,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-cubieboard" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig index 1f6a8e3..57a3847 100644 --- a/configs/Cubietruck_defconfig +++ b/configs/Cubietruck_defconfig @@ -8,10 +8,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubietruck" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_DM_SERIAL=y CONFIG_USB=y diff --git a/configs/Et_q8_v1_6_defconfig b/configs/Et_q8_v1_6_defconfig index 5af232f..e36895c 100644 --- a/configs/Et_q8_v1_6_defconfig +++ b/configs/Et_q8_v1_6_defconfig @@ -16,10 +16,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-et-q8-v1.6" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3000 diff --git a/configs/Hummingbird_A31_defconfig b/configs/Hummingbird_A31_defconfig index 2b02b2d..02c657a 100644 --- a/configs/Hummingbird_A31_defconfig +++ b/configs/Hummingbird_A31_defconfig @@ -10,10 +10,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-hummingbird" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_DM_SERIAL=y CONFIG_AXP221_ALDO1_VOLT=3300 diff --git a/configs/Hyundai_A7HD_defconfig b/configs/Hyundai_A7HD_defconfig index 9302a06..7800fa2 100644 --- a/configs/Hyundai_A7HD_defconfig +++ b/configs/Hyundai_A7HD_defconfig @@ -17,8 +17,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-hyundai-a7hd" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y diff --git a/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig b/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig index 7861417..63910c2 100644 --- a/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig +++ b/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig @@ -16,10 +16,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2-lcd1024x600" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3000 diff --git a/configs/Ippo_q8h_v1_2_defconfig b/configs/Ippo_q8h_v1_2_defconfig index 3672ab9..ab62210 100644 --- a/configs/Ippo_q8h_v1_2_defconfig +++ b/configs/Ippo_q8h_v1_2_defconfig @@ -16,10 +16,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v1.2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3000 diff --git a/configs/Ippo_q8h_v5_defconfig b/configs/Ippo_q8h_v5_defconfig index 2120709..312a38c 100644 --- a/configs/Ippo_q8h_v5_defconfig +++ b/configs/Ippo_q8h_v5_defconfig @@ -16,10 +16,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v5" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3000 diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig b/configs/Linksprite_pcDuino3_Nano_defconfig index 08a7c63..04ec7ab 100644 --- a/configs/Linksprite_pcDuino3_Nano_defconfig +++ b/configs/Linksprite_pcDuino3_Nano_defconfig @@ -9,10 +9,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3-nano" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_DM_SERIAL=y CONFIG_USB=y diff --git a/configs/Linksprite_pcDuino3_defconfig b/configs/Linksprite_pcDuino3_defconfig index b548d1d..6d7690d 100644 --- a/configs/Linksprite_pcDuino3_defconfig +++ b/configs/Linksprite_pcDuino3_defconfig @@ -7,10 +7,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_DM_SERIAL=y CONFIG_USB=y diff --git a/configs/Linksprite_pcDuino_defconfig b/configs/Linksprite_pcDuino_defconfig index caf874a..ddd162f 100644 --- a/configs/Linksprite_pcDuino_defconfig +++ b/configs/Linksprite_pcDuino_defconfig @@ -6,10 +6,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pcduino" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/M5208EVBE_defconfig b/configs/M5208EVBE_defconfig index d226671..58de96b 100644 --- a/configs/M5208EVBE_defconfig +++ b/configs/M5208EVBE_defconfig @@ -1,3 +1,3 @@ CONFIG_M68K=y CONFIG_TARGET_M5208EVBE=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M52277EVB_defconfig b/configs/M52277EVB_defconfig index 730a4b8..6a2d175 100644 --- a/configs/M52277EVB_defconfig +++ b/configs/M52277EVB_defconfig @@ -1,4 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M52277EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_SPANSION_BOOT,SYS_TEXT_BASE=0x00000000" +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set CONFIG_SPI_FLASH=y diff --git a/configs/M52277EVB_stmicro_defconfig b/configs/M52277EVB_stmicro_defconfig index 41a4283..1ee9c8b 100644 --- a/configs/M52277EVB_stmicro_defconfig +++ b/configs/M52277EVB_stmicro_defconfig @@ -1,4 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M52277EVB=y CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x43E00000" +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set CONFIG_SPI_FLASH=y diff --git a/configs/M5235EVB_Flash32_defconfig b/configs/M5235EVB_Flash32_defconfig index 86befea..5f381e2 100644 --- a/configs/M5235EVB_Flash32_defconfig +++ b/configs/M5235EVB_Flash32_defconfig @@ -1,4 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5235EVB=y CONFIG_SYS_EXTRA_OPTIONS="NORFLASH_PS32BIT,SYS_TEXT_BASE=0xFFC00000" -CONFIG_CMD_NET=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5235EVB_defconfig b/configs/M5235EVB_defconfig index db574fb..3292cff 100644 --- a/configs/M5235EVB_defconfig +++ b/configs/M5235EVB_defconfig @@ -1,4 +1,6 @@ CONFIG_M68K=y CONFIG_TARGET_M5235EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xFFE00000" -CONFIG_CMD_NET=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5249EVB_defconfig b/configs/M5249EVB_defconfig index fb29274..1467b16 100644 --- a/configs/M5249EVB_defconfig +++ b/configs/M5249EVB_defconfig @@ -1,2 +1,4 @@ CONFIG_M68K=y CONFIG_TARGET_M5249EVB=y +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set diff --git a/configs/M5253DEMO_defconfig b/configs/M5253DEMO_defconfig index 4e465e0..89e7e75 100644 --- a/configs/M5253DEMO_defconfig +++ b/configs/M5253DEMO_defconfig @@ -1,3 +1,3 @@ CONFIG_M68K=y CONFIG_TARGET_M5253DEMO=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5253EVBE_defconfig b/configs/M5253EVBE_defconfig index 5c562fe..e337f32 100644 --- a/configs/M5253EVBE_defconfig +++ b/configs/M5253EVBE_defconfig @@ -1,2 +1,4 @@ CONFIG_M68K=y CONFIG_TARGET_M5253EVBE=y +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set diff --git a/configs/M5272C3_defconfig b/configs/M5272C3_defconfig index 28daa0d..23d5468 100644 --- a/configs/M5272C3_defconfig +++ b/configs/M5272C3_defconfig @@ -1,3 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5272C3=y -CONFIG_CMD_NET=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5275EVB_defconfig b/configs/M5275EVB_defconfig index ce0e80a..f051bf1 100644 --- a/configs/M5275EVB_defconfig +++ b/configs/M5275EVB_defconfig @@ -1,3 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5275EVB=y -CONFIG_CMD_NET=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5282EVB_defconfig b/configs/M5282EVB_defconfig index d55c163..6c130e8 100644 --- a/configs/M5282EVB_defconfig +++ b/configs/M5282EVB_defconfig @@ -1,3 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_M5282EVB=y -CONFIG_CMD_NET=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M53017EVB_defconfig b/configs/M53017EVB_defconfig index 5525272..1f5bc86 100644 --- a/configs/M53017EVB_defconfig +++ b/configs/M53017EVB_defconfig @@ -1,3 +1,3 @@ CONFIG_M68K=y CONFIG_TARGET_M53017EVB=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5329AFEE_defconfig b/configs/M5329AFEE_defconfig index ea82c75..02af3a4 100644 --- a/configs/M5329AFEE_defconfig +++ b/configs/M5329AFEE_defconfig @@ -1,4 +1,4 @@ CONFIG_M68K=y CONFIG_TARGET_M5329EVB=y CONFIG_SYS_EXTRA_OPTIONS="NANDFLASH_SIZE=0" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5329BFEE_defconfig b/configs/M5329BFEE_defconfig index 267144a..f757a35 100644 --- a/configs/M5329BFEE_defconfig +++ b/configs/M5329BFEE_defconfig @@ -1,4 +1,4 @@ CONFIG_M68K=y CONFIG_TARGET_M5329EVB=y CONFIG_SYS_EXTRA_OPTIONS="NANDFLASH_SIZE=16" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5373EVB_defconfig b/configs/M5373EVB_defconfig index dfadcf2..304ca48 100644 --- a/configs/M5373EVB_defconfig +++ b/configs/M5373EVB_defconfig @@ -1,4 +1,4 @@ CONFIG_M68K=y CONFIG_TARGET_M5373EVB=y CONFIG_SYS_EXTRA_OPTIONS="NANDFLASH_SIZE=16" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M54418TWR_defconfig b/configs/M54418TWR_defconfig index d84eff7..9a93b3b 100644 --- a/configs/M54418TWR_defconfig +++ b/configs/M54418TWR_defconfig @@ -1,5 +1,9 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/M54418TWR_nand_mii_defconfig b/configs/M54418TWR_nand_mii_defconfig index 7f8fd55..c194ea7 100644 --- a/configs/M54418TWR_nand_mii_defconfig +++ b/configs/M54418TWR_nand_mii_defconfig @@ -1,5 +1,9 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=25000000" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/M54418TWR_nand_rmii_defconfig b/configs/M54418TWR_nand_rmii_defconfig index d7dea64..4ee35ff 100644 --- a/configs/M54418TWR_nand_rmii_defconfig +++ b/configs/M54418TWR_nand_rmii_defconfig @@ -1,5 +1,9 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/M54418TWR_nand_rmii_lowfreq_defconfig b/configs/M54418TWR_nand_rmii_lowfreq_defconfig index 4bf7439..4c4b70a 100644 --- a/configs/M54418TWR_nand_rmii_lowfreq_defconfig +++ b/configs/M54418TWR_nand_rmii_lowfreq_defconfig @@ -1,5 +1,9 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,LOW_MCFCLK,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/M54418TWR_serial_mii_defconfig b/configs/M54418TWR_serial_mii_defconfig index a1ceaf3..3be102c 100644 --- a/configs/M54418TWR_serial_mii_defconfig +++ b/configs/M54418TWR_serial_mii_defconfig @@ -1,5 +1,9 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=25000000" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/M54418TWR_serial_rmii_defconfig b/configs/M54418TWR_serial_rmii_defconfig index d84eff7..9a93b3b 100644 --- a/configs/M54418TWR_serial_rmii_defconfig +++ b/configs/M54418TWR_serial_rmii_defconfig @@ -1,5 +1,9 @@ CONFIG_M68K=y CONFIG_TARGET_M54418TWR=y CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/M54451EVB_defconfig b/configs/M54451EVB_defconfig index 2f3d77a..b35bb81 100644 --- a/configs/M54451EVB_defconfig +++ b/configs/M54451EVB_defconfig @@ -1,5 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54451EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=24000000" -CONFIG_CMD_NET=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/M54451EVB_stmicro_defconfig b/configs/M54451EVB_stmicro_defconfig index 32f17e0..9b69415 100644 --- a/configs/M54451EVB_stmicro_defconfig +++ b/configs/M54451EVB_stmicro_defconfig @@ -1,5 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54451EVB=y CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x47e00000,SYS_INPUT_CLKSRC=24000000" -CONFIG_CMD_NET=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/M54455EVB_a66_defconfig b/configs/M54455EVB_a66_defconfig index 549d8bf..e82d0bd 100644 --- a/configs/M54455EVB_a66_defconfig +++ b/configs/M54455EVB_a66_defconfig @@ -1,5 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54455EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=66666666" -CONFIG_CMD_NET=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/M54455EVB_defconfig b/configs/M54455EVB_defconfig index a63da60..cb56586 100644 --- a/configs/M54455EVB_defconfig +++ b/configs/M54455EVB_defconfig @@ -1,5 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54455EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=33333333" -CONFIG_CMD_NET=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/M54455EVB_i66_defconfig b/configs/M54455EVB_i66_defconfig index 86c39ea..bc7d707 100644 --- a/configs/M54455EVB_i66_defconfig +++ b/configs/M54455EVB_i66_defconfig @@ -1,5 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54455EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_INTEL_BOOT,SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=66666666" -CONFIG_CMD_NET=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/M54455EVB_intel_defconfig b/configs/M54455EVB_intel_defconfig index 593ddc1..cb5b4bd 100644 --- a/configs/M54455EVB_intel_defconfig +++ b/configs/M54455EVB_intel_defconfig @@ -1,5 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54455EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_INTEL_BOOT,SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=33333333" -CONFIG_CMD_NET=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/M54455EVB_stm33_defconfig b/configs/M54455EVB_stm33_defconfig index 5efb472..a79f949 100644 --- a/configs/M54455EVB_stm33_defconfig +++ b/configs/M54455EVB_stm33_defconfig @@ -1,5 +1,7 @@ CONFIG_M68K=y CONFIG_TARGET_M54455EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_STMICRO_BOOT,CF_SBF,SYS_TEXT_BASE=0x4FE00000,SYS_INPUT_CLKSRC=33333333" -CONFIG_CMD_NET=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/M5475AFE_defconfig b/configs/M5475AFE_defconfig index 48d5cf9..343f52f 100644 --- a/configs/M5475AFE_defconfig +++ b/configs/M5475AFE_defconfig @@ -1,4 +1,4 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5475BFE_defconfig b/configs/M5475BFE_defconfig index 4ffe19f..c9667da 100644 --- a/configs/M5475BFE_defconfig +++ b/configs/M5475BFE_defconfig @@ -1,4 +1,4 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5475CFE_defconfig b/configs/M5475CFE_defconfig index 31d2e33..c1a9558 100644 --- a/configs/M5475CFE_defconfig +++ b/configs/M5475CFE_defconfig @@ -1,4 +1,4 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO,SYS_USBCTRL" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5475DFE_defconfig b/configs/M5475DFE_defconfig index dd4b23b..d879894 100644 --- a/configs/M5475DFE_defconfig +++ b/configs/M5475DFE_defconfig @@ -1,4 +1,4 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_USBCTRL" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5475EFE_defconfig b/configs/M5475EFE_defconfig index 1c6d0a6..9b677ee 100644 --- a/configs/M5475EFE_defconfig +++ b/configs/M5475EFE_defconfig @@ -1,4 +1,4 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_VIDEO,SYS_USBCTRL" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5475FFE_defconfig b/configs/M5475FFE_defconfig index 6b4f0d6..4989b00 100644 --- a/configs/M5475FFE_defconfig +++ b/configs/M5475FFE_defconfig @@ -1,4 +1,4 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=32,SYS_VIDEO,SYS_USBCTRL,SYS_DRAMSZ1=64" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5475GFE_defconfig b/configs/M5475GFE_defconfig index b65ad58..31df40e 100644 --- a/configs/M5475GFE_defconfig +++ b/configs/M5475GFE_defconfig @@ -1,4 +1,4 @@ CONFIG_M68K=y CONFIG_TARGET_M5475EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=4,SYS_DRAMSZ=64" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5485AFE_defconfig b/configs/M5485AFE_defconfig index 40c2736..5381b74 100644 --- a/configs/M5485AFE_defconfig +++ b/configs/M5485AFE_defconfig @@ -1,4 +1,4 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5485BFE_defconfig b/configs/M5485BFE_defconfig index b3fed5a..36dcccf 100644 --- a/configs/M5485BFE_defconfig +++ b/configs/M5485BFE_defconfig @@ -1,4 +1,4 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5485CFE_defconfig b/configs/M5485CFE_defconfig index 6685232..e5cc1e1 100644 --- a/configs/M5485CFE_defconfig +++ b/configs/M5485CFE_defconfig @@ -1,4 +1,4 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO,SYS_USBCTRL" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5485DFE_defconfig b/configs/M5485DFE_defconfig index a26bc2b..fdf667a 100644 --- a/configs/M5485DFE_defconfig +++ b/configs/M5485DFE_defconfig @@ -1,4 +1,4 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_USBCTRL" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5485EFE_defconfig b/configs/M5485EFE_defconfig index f9ee78f..a5933f2 100644 --- a/configs/M5485EFE_defconfig +++ b/configs/M5485EFE_defconfig @@ -1,4 +1,4 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_VIDEO,SYS_USBCTRL" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5485FFE_defconfig b/configs/M5485FFE_defconfig index cbdc547..116c5cc 100644 --- a/configs/M5485FFE_defconfig +++ b/configs/M5485FFE_defconfig @@ -1,4 +1,4 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=32,SYS_VIDEO,SYS_USBCTRL,SYS_DRAMSZ1=64" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5485GFE_defconfig b/configs/M5485GFE_defconfig index fc8837a..fd5fc1a 100644 --- a/configs/M5485GFE_defconfig +++ b/configs/M5485GFE_defconfig @@ -1,4 +1,4 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=4,SYS_DRAMSZ=64" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5485HFE_defconfig b/configs/M5485HFE_defconfig index 6b0ee23..6e2768c 100644 --- a/configs/M5485HFE_defconfig +++ b/configs/M5485HFE_defconfig @@ -1,4 +1,4 @@ CONFIG_M68K=y CONFIG_TARGET_M5485EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MIP405T_defconfig b/configs/MIP405T_defconfig index 769ed7c..22b82b1 100644 --- a/configs/MIP405T_defconfig +++ b/configs/MIP405T_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_MIP405=y CONFIG_SYS_EXTRA_OPTIONS="MIP405T" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MIP405_defconfig b/configs/MIP405_defconfig index 792ca2d..f25cf51 100644 --- a/configs/MIP405_defconfig +++ b/configs/MIP405_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_MIP405=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MK808C_defconfig b/configs/MK808C_defconfig index f0ee148..a6db139 100644 --- a/configs/MK808C_defconfig +++ b/configs/MK808C_defconfig @@ -6,10 +6,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-mk808c" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/MPC8308RDB_defconfig b/configs/MPC8308RDB_defconfig index 9c8a55b..cb98324 100644 --- a/configs/MPC8308RDB_defconfig +++ b/configs/MPC8308RDB_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC8308RDB=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MPC8313ERDB_33_defconfig b/configs/MPC8313ERDB_33_defconfig index e8ca3cf..a984c48 100644 --- a/configs/MPC8313ERDB_33_defconfig +++ b/configs/MPC8313ERDB_33_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC8313ERDB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_33MHZ" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MPC8313ERDB_66_defconfig b/configs/MPC8313ERDB_66_defconfig index bc8b9c0..5b1ee7c 100644 --- a/configs/MPC8313ERDB_66_defconfig +++ b/configs/MPC8313ERDB_66_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC8313ERDB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_66MHZ" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MPC8313ERDB_NAND_33_defconfig b/configs/MPC8313ERDB_NAND_33_defconfig index 99de0a9..b1052ef 100644 --- a/configs/MPC8313ERDB_NAND_33_defconfig +++ b/configs/MPC8313ERDB_NAND_33_defconfig @@ -3,4 +3,4 @@ CONFIG_MPC83xx=y CONFIG_TARGET_MPC8313ERDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SYS_33MHZ,NAND" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MPC8313ERDB_NAND_66_defconfig b/configs/MPC8313ERDB_NAND_66_defconfig index b4fecba..fe59fe8 100644 --- a/configs/MPC8313ERDB_NAND_66_defconfig +++ b/configs/MPC8313ERDB_NAND_66_defconfig @@ -3,4 +3,4 @@ CONFIG_MPC83xx=y CONFIG_TARGET_MPC8313ERDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SYS_66MHZ,NAND" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MPC8315ERDB_defconfig b/configs/MPC8315ERDB_defconfig index db8963e..e618381 100644 --- a/configs/MPC8315ERDB_defconfig +++ b/configs/MPC8315ERDB_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC8315ERDB=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MPC8323ERDB_defconfig b/configs/MPC8323ERDB_defconfig index 8eb6c2b..762ad5b 100644 --- a/configs/MPC8323ERDB_defconfig +++ b/configs/MPC8323ERDB_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC8323ERDB=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MPC832XEMDS_ATM_defconfig b/configs/MPC832XEMDS_ATM_defconfig index 3c544be..b4b3724 100644 --- a/configs/MPC832XEMDS_ATM_defconfig +++ b/configs/MPC832XEMDS_ATM_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC832XEMDS=y CONFIG_SYS_EXTRA_OPTIONS="PQ_MDS_PIB=1,PQ_MDS_PIB_ATM=1" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MPC832XEMDS_HOST_33_defconfig b/configs/MPC832XEMDS_HOST_33_defconfig index 0be0f78..9a2f338 100644 --- a/configs/MPC832XEMDS_HOST_33_defconfig +++ b/configs/MPC832XEMDS_HOST_33_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC832XEMDS=y CONFIG_SYS_EXTRA_OPTIONS="PCI,PCI_33M,PQ_MDS_PIB=1" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MPC832XEMDS_HOST_66_defconfig b/configs/MPC832XEMDS_HOST_66_defconfig index 1c8f3ab..66e4269 100644 --- a/configs/MPC832XEMDS_HOST_66_defconfig +++ b/configs/MPC832XEMDS_HOST_66_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC832XEMDS=y CONFIG_SYS_EXTRA_OPTIONS="PCI,PCI_66M,PQ_MDS_PIB=1" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MPC832XEMDS_SLAVE_defconfig b/configs/MPC832XEMDS_SLAVE_defconfig index 2c0bfab..467f220 100644 --- a/configs/MPC832XEMDS_SLAVE_defconfig +++ b/configs/MPC832XEMDS_SLAVE_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC832XEMDS=y CONFIG_SYS_EXTRA_OPTIONS="PCI,PCISLAVE" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MPC832XEMDS_defconfig b/configs/MPC832XEMDS_defconfig index 19b596b..3e24ab1 100644 --- a/configs/MPC832XEMDS_defconfig +++ b/configs/MPC832XEMDS_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC832XEMDS=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MPC8349EMDS_defconfig b/configs/MPC8349EMDS_defconfig index 0035801..6a907cf 100644 --- a/configs/MPC8349EMDS_defconfig +++ b/configs/MPC8349EMDS_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC8349EMDS=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MPC8349ITXGP_defconfig b/configs/MPC8349ITXGP_defconfig index 8ebcee2..7a43fa0 100644 --- a/configs/MPC8349ITXGP_defconfig +++ b/configs/MPC8349ITXGP_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC8349ITX=y CONFIG_SYS_EXTRA_OPTIONS="MPC8349ITXGP,SYS_TEXT_BASE=0xFE000000" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MPC8349ITX_LOWBOOT_defconfig b/configs/MPC8349ITX_LOWBOOT_defconfig index 4bbf4fa..f74d42c 100644 --- a/configs/MPC8349ITX_LOWBOOT_defconfig +++ b/configs/MPC8349ITX_LOWBOOT_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC8349ITX=y CONFIG_SYS_EXTRA_OPTIONS="MPC8349ITX,SYS_TEXT_BASE=0xFE000000" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MPC8349ITX_defconfig b/configs/MPC8349ITX_defconfig index 3f9c0c5..84c117c 100644 --- a/configs/MPC8349ITX_defconfig +++ b/configs/MPC8349ITX_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC8349ITX=y CONFIG_SYS_EXTRA_OPTIONS="MPC8349ITX" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MPC837XEMDS_HOST_defconfig b/configs/MPC837XEMDS_HOST_defconfig index c0beec2..2e472a7 100644 --- a/configs/MPC837XEMDS_HOST_defconfig +++ b/configs/MPC837XEMDS_HOST_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC837XEMDS=y CONFIG_SYS_EXTRA_OPTIONS="PCI" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MPC837XEMDS_defconfig b/configs/MPC837XEMDS_defconfig index f622d35..21b4506 100644 --- a/configs/MPC837XEMDS_defconfig +++ b/configs/MPC837XEMDS_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC837XEMDS=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MPC837XERDB_defconfig b/configs/MPC837XERDB_defconfig index 49ebd3a..126d0d2 100644 --- a/configs/MPC837XERDB_defconfig +++ b/configs/MPC837XERDB_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC837XERDB=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MPC8536DS_36BIT_defconfig b/configs/MPC8536DS_36BIT_defconfig index c32ae96..4b626a6 100644 --- a/configs/MPC8536DS_36BIT_defconfig +++ b/configs/MPC8536DS_36BIT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8536DS=y CONFIG_SYS_EXTRA_OPTIONS="36BIT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/MPC8536DS_SDCARD_defconfig b/configs/MPC8536DS_SDCARD_defconfig index 9c45cee..3b02eb8 100644 --- a/configs/MPC8536DS_SDCARD_defconfig +++ b/configs/MPC8536DS_SDCARD_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8536DS=y CONFIG_SYS_EXTRA_OPTIONS="SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/MPC8536DS_SPIFLASH_defconfig b/configs/MPC8536DS_SPIFLASH_defconfig index 98d62ac..0453cd2 100644 --- a/configs/MPC8536DS_SPIFLASH_defconfig +++ b/configs/MPC8536DS_SPIFLASH_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8536DS=y CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/MPC8536DS_defconfig b/configs/MPC8536DS_defconfig index bc43218..ceaa9e8 100644 --- a/configs/MPC8536DS_defconfig +++ b/configs/MPC8536DS_defconfig @@ -1,6 +1,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8536DS=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/MPC8540ADS_defconfig b/configs/MPC8540ADS_defconfig index d658404..41af349 100644 --- a/configs/MPC8540ADS_defconfig +++ b/configs/MPC8540ADS_defconfig @@ -1,5 +1,3 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8540ADS=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/MPC8541CDS_defconfig b/configs/MPC8541CDS_defconfig index 34c0d06..bc9c246 100644 --- a/configs/MPC8541CDS_defconfig +++ b/configs/MPC8541CDS_defconfig @@ -1,5 +1,3 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8541CDS=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/MPC8541CDS_legacy_defconfig b/configs/MPC8541CDS_legacy_defconfig index 9860dea..55478ab 100644 --- a/configs/MPC8541CDS_legacy_defconfig +++ b/configs/MPC8541CDS_legacy_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8541CDS=y CONFIG_SYS_EXTRA_OPTIONS="LEGACY" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/MPC8544DS_defconfig b/configs/MPC8544DS_defconfig index 5461b0d..faeaa94 100644 --- a/configs/MPC8544DS_defconfig +++ b/configs/MPC8544DS_defconfig @@ -1,5 +1,3 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8544DS=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/MPC8548CDS_36BIT_defconfig b/configs/MPC8548CDS_36BIT_defconfig index 2a4f825..dfe1fca 100644 --- a/configs/MPC8548CDS_36BIT_defconfig +++ b/configs/MPC8548CDS_36BIT_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8548CDS=y CONFIG_SYS_EXTRA_OPTIONS="36BIT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/MPC8548CDS_defconfig b/configs/MPC8548CDS_defconfig index 9f214d9..ba52e94 100644 --- a/configs/MPC8548CDS_defconfig +++ b/configs/MPC8548CDS_defconfig @@ -1,5 +1,3 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8548CDS=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/MPC8548CDS_legacy_defconfig b/configs/MPC8548CDS_legacy_defconfig index bdc7aa5..69c44af 100644 --- a/configs/MPC8548CDS_legacy_defconfig +++ b/configs/MPC8548CDS_legacy_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8548CDS=y CONFIG_SYS_EXTRA_OPTIONS="LEGACY" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/MPC8555CDS_defconfig b/configs/MPC8555CDS_defconfig index ba2747a..3bdbb0c 100644 --- a/configs/MPC8555CDS_defconfig +++ b/configs/MPC8555CDS_defconfig @@ -1,5 +1,3 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8555CDS=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/MPC8555CDS_legacy_defconfig b/configs/MPC8555CDS_legacy_defconfig index fdd3c10..8e53ee0 100644 --- a/configs/MPC8555CDS_legacy_defconfig +++ b/configs/MPC8555CDS_legacy_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8555CDS=y CONFIG_SYS_EXTRA_OPTIONS="LEGACY" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/MPC8560ADS_defconfig b/configs/MPC8560ADS_defconfig index 4ec548f..aa84d28 100644 --- a/configs/MPC8560ADS_defconfig +++ b/configs/MPC8560ADS_defconfig @@ -1,5 +1,3 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8560ADS=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/MPC8568MDS_defconfig b/configs/MPC8568MDS_defconfig index 27cc6c4..ac0ec8c 100644 --- a/configs/MPC8568MDS_defconfig +++ b/configs/MPC8568MDS_defconfig @@ -1,5 +1,3 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8568MDS=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/MPC8569MDS_ATM_defconfig b/configs/MPC8569MDS_ATM_defconfig index 18b567e..326983d 100644 --- a/configs/MPC8569MDS_ATM_defconfig +++ b/configs/MPC8569MDS_ATM_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8569MDS=y CONFIG_SYS_EXTRA_OPTIONS="ATM" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/MPC8569MDS_defconfig b/configs/MPC8569MDS_defconfig index 5dbfe76..81fb82a 100644 --- a/configs/MPC8569MDS_defconfig +++ b/configs/MPC8569MDS_defconfig @@ -1,5 +1,3 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8569MDS=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/MPC8572DS_36BIT_defconfig b/configs/MPC8572DS_36BIT_defconfig index d0b6ce8..0ce85e4 100644 --- a/configs/MPC8572DS_36BIT_defconfig +++ b/configs/MPC8572DS_36BIT_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8572DS=y CONFIG_SYS_EXTRA_OPTIONS="36BIT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/MPC8572DS_defconfig b/configs/MPC8572DS_defconfig index 6f2178a..dde9eb2 100644 --- a/configs/MPC8572DS_defconfig +++ b/configs/MPC8572DS_defconfig @@ -1,5 +1,3 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_MPC8572DS=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/MPC8610HPCD_defconfig b/configs/MPC8610HPCD_defconfig index ba94f54..f0e1370 100644 --- a/configs/MPC8610HPCD_defconfig +++ b/configs/MPC8610HPCD_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC86xx=y CONFIG_TARGET_MPC8610HPCD=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MPC8641HPCN_36BIT_defconfig b/configs/MPC8641HPCN_36BIT_defconfig index 8279461..0aee7ea 100644 --- a/configs/MPC8641HPCN_36BIT_defconfig +++ b/configs/MPC8641HPCN_36BIT_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC86xx=y CONFIG_TARGET_MPC8641HPCN=y CONFIG_SYS_EXTRA_OPTIONS="PHYS_64BIT" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MPC8641HPCN_defconfig b/configs/MPC8641HPCN_defconfig index b4a4eb5..2bee038 100644 --- a/configs/MPC8641HPCN_defconfig +++ b/configs/MPC8641HPCN_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC86xx=y CONFIG_TARGET_MPC8641HPCN=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/MSI_Primo73_defconfig b/configs/MSI_Primo73_defconfig index 6db1115..6e0d246 100644 --- a/configs/MSI_Primo73_defconfig +++ b/configs/MSI_Primo73_defconfig @@ -12,10 +12,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-primo73" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig index 5c633c7..9787e34 100644 --- a/configs/MSI_Primo81_defconfig +++ b/configs/MSI_Primo81_defconfig @@ -15,10 +15,10 @@ CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-primo81" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_VIDEO_LCD_SSD2828_TX_CLK=27 diff --git a/configs/Marsboard_A10_defconfig b/configs/Marsboard_A10_defconfig index 01758e4..ed41af6 100644 --- a/configs/Marsboard_A10_defconfig +++ b/configs/Marsboard_A10_defconfig @@ -5,10 +5,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-marsboard" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/Mele_A1000G_quad_defconfig b/configs/Mele_A1000G_quad_defconfig index f55b706..6e0a493 100644 --- a/configs/Mele_A1000G_quad_defconfig +++ b/configs/Mele_A1000G_quad_defconfig @@ -8,10 +8,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mele-a1000g-quad" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_DM_SERIAL=y CONFIG_AXP221_DCDC1_VOLT=3300 diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig index aad71fc..983ffdc 100644 --- a/configs/Mele_A1000_defconfig +++ b/configs/Mele_A1000_defconfig @@ -6,10 +6,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-a1000" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/Mele_I7_defconfig b/configs/Mele_I7_defconfig index f96ee14..7f083a7 100644 --- a/configs/Mele_I7_defconfig +++ b/configs/Mele_I7_defconfig @@ -8,10 +8,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-i7" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_DM_SERIAL=y CONFIG_AXP221_DCDC1_VOLT=3300 diff --git a/configs/Mele_M3_defconfig b/configs/Mele_M3_defconfig index e2869a3..73d87c3 100644 --- a/configs/Mele_M3_defconfig +++ b/configs/Mele_M3_defconfig @@ -9,10 +9,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m3" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_DM_SERIAL=y CONFIG_USB=y diff --git a/configs/Mele_M5_defconfig b/configs/Mele_M5_defconfig index aad12a1..79c5901 100644 --- a/configs/Mele_M5_defconfig +++ b/configs/Mele_M5_defconfig @@ -8,10 +8,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m5" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,USB_EHCI,STATUSLED=234" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_DM_SERIAL=y CONFIG_USB=y diff --git a/configs/Mele_M9_defconfig b/configs/Mele_M9_defconfig index c3242b8..e017ad7 100644 --- a/configs/Mele_M9_defconfig +++ b/configs/Mele_M9_defconfig @@ -8,10 +8,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-m9" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_DM_SERIAL=y CONFIG_AXP221_DCDC1_VOLT=3300 diff --git a/configs/Merrii_A80_Optimus_defconfig b/configs/Merrii_A80_Optimus_defconfig index 4a0dce7..b02b1a3 100644 --- a/configs/Merrii_A80_Optimus_defconfig +++ b/configs/Merrii_A80_Optimus_defconfig @@ -9,10 +9,10 @@ CONFIG_MMC0_CD_PIN="PH18" # CONFIG_USB_KEYBOARD is not set CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-optimus" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/MigoR_defconfig b/configs/MigoR_defconfig index e6a9660..3255ed2 100644 --- a/configs/MigoR_defconfig +++ b/configs/MigoR_defconfig @@ -1,4 +1,18 @@ CONFIG_SH=y CONFIG_TARGET_MIGOR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig index 4ec752b..da57711 100644 --- a/configs/Mini-X_defconfig +++ b/configs/Mini-X_defconfig @@ -5,10 +5,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mini-xplus" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/MiniFAP_defconfig b/configs/MiniFAP_defconfig index dc6c942..1e5fd75 100644 --- a/configs/MiniFAP_defconfig +++ b/configs/MiniFAP_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_TQM5200=y CONFIG_SYS_EXTRA_OPTIONS="MINIFAP" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/O2D300_defconfig b/configs/O2D300_defconfig index dcf3255..db88295 100644 --- a/configs/O2D300_defconfig +++ b/configs/O2D300_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_O2D300=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/O2DNT2_RAMBOOT_defconfig b/configs/O2DNT2_RAMBOOT_defconfig index 40e238a..ca54ca5 100644 --- a/configs/O2DNT2_RAMBOOT_defconfig +++ b/configs/O2DNT2_RAMBOOT_defconfig @@ -5,4 +5,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x00100000" CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press password to stop\n" CONFIG_AUTOBOOT_STOP_STR="++++++++++" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/O2DNT2_defconfig b/configs/O2DNT2_defconfig index 6bd3cee..a4ead75 100644 --- a/configs/O2DNT2_defconfig +++ b/configs/O2DNT2_defconfig @@ -4,4 +4,4 @@ CONFIG_TARGET_O2DNT2=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press password to stop\n" CONFIG_AUTOBOOT_STOP_STR="++++++++++" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/O2D_defconfig b/configs/O2D_defconfig index 98efde8..3248fc9 100644 --- a/configs/O2D_defconfig +++ b/configs/O2D_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_O2D=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/O2I_defconfig b/configs/O2I_defconfig index 80bce5d..5d51be6 100644 --- a/configs/O2I_defconfig +++ b/configs/O2I_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_O2I=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/O2MNT_O2M110_defconfig b/configs/O2MNT_O2M110_defconfig index e452f90..22e7e98 100644 --- a/configs/O2MNT_O2M110_defconfig +++ b/configs/O2MNT_O2M110_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_O2MNT=y CONFIG_SYS_EXTRA_OPTIONS="IFM_SENSOR_TYPE=\"O2M110\"" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/O2MNT_O2M112_defconfig b/configs/O2MNT_O2M112_defconfig index a1ee009..5342719 100644 --- a/configs/O2MNT_O2M112_defconfig +++ b/configs/O2MNT_O2M112_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_O2MNT=y CONFIG_SYS_EXTRA_OPTIONS="IFM_SENSOR_TYPE=\"O2M112\"" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/O2MNT_O2M113_defconfig b/configs/O2MNT_O2M113_defconfig index 5e8db1c..bcbb598 100644 --- a/configs/O2MNT_O2M113_defconfig +++ b/configs/O2MNT_O2M113_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_O2MNT=y CONFIG_SYS_EXTRA_OPTIONS="IFM_SENSOR_TYPE=\"O2M113\"" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/O2MNT_defconfig b/configs/O2MNT_defconfig index d0eb289..a29f70a 100644 --- a/configs/O2MNT_defconfig +++ b/configs/O2MNT_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_O2MNT=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/O3DNT_defconfig b/configs/O3DNT_defconfig index d50879a..8411294 100644 --- a/configs/O3DNT_defconfig +++ b/configs/O3DNT_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_O3DNT=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/Orangepi_defconfig b/configs/Orangepi_defconfig index 23b5761..ba89a25 100644 --- a/configs/Orangepi_defconfig +++ b/configs/Orangepi_defconfig @@ -10,10 +10,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_DM_SERIAL=y CONFIG_USB=y diff --git a/configs/Orangepi_mini_defconfig b/configs/Orangepi_mini_defconfig index 99bb94e..8f03815 100644 --- a/configs/Orangepi_mini_defconfig +++ b/configs/Orangepi_mini_defconfig @@ -12,10 +12,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi-mini" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_DM_SERIAL=y CONFIG_USB=y diff --git a/configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig b/configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig index 6530f07..d27fd5e 100644 --- a/configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig +++ b/configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,36BIT,NAND_SECBOOT,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PA_36BIT_NAND_defconfig b/configs/P1010RDB-PA_36BIT_NAND_defconfig index ffb3469..e69f1c4 100644 --- a/configs/P1010RDB-PA_36BIT_NAND_defconfig +++ b/configs/P1010RDB-PA_36BIT_NAND_defconfig @@ -4,6 +4,4 @@ CONFIG_TARGET_P1010RDB=y CONFIG_SPL=y CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,36BIT,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PA_36BIT_NOR_SECBOOT_defconfig b/configs/P1010RDB-PA_36BIT_NOR_SECBOOT_defconfig index f8c8c5d..42f7625 100644 --- a/configs/P1010RDB-PA_36BIT_NOR_SECBOOT_defconfig +++ b/configs/P1010RDB-PA_36BIT_NOR_SECBOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,36BIT,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PA_36BIT_NOR_defconfig b/configs/P1010RDB-PA_36BIT_NOR_defconfig index 6c066aa..cb86d2a 100644 --- a/configs/P1010RDB-PA_36BIT_NOR_defconfig +++ b/configs/P1010RDB-PA_36BIT_NOR_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,36BIT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PA_36BIT_SDCARD_defconfig b/configs/P1010RDB-PA_36BIT_SDCARD_defconfig index c0fa356..be09aab 100644 --- a/configs/P1010RDB-PA_36BIT_SDCARD_defconfig +++ b/configs/P1010RDB-PA_36BIT_SDCARD_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,36BIT,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PA_36BIT_SPIFLASH_SECBOOT_defconfig b/configs/P1010RDB-PA_36BIT_SPIFLASH_SECBOOT_defconfig index 5cd85f9..20136e3 100644 --- a/configs/P1010RDB-PA_36BIT_SPIFLASH_SECBOOT_defconfig +++ b/configs/P1010RDB-PA_36BIT_SPIFLASH_SECBOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,36BIT,SPIFLASH,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig b/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig index d550a6b..8f2bbc9 100644 --- a/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig +++ b/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,36BIT,SPIFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PA_NAND_SECBOOT_defconfig b/configs/P1010RDB-PA_NAND_SECBOOT_defconfig index 004fe69..f760952 100644 --- a/configs/P1010RDB-PA_NAND_SECBOOT_defconfig +++ b/configs/P1010RDB-PA_NAND_SECBOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,NAND_SECBOOT,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PA_NAND_defconfig b/configs/P1010RDB-PA_NAND_defconfig index 16fad87..d00b7d2 100644 --- a/configs/P1010RDB-PA_NAND_defconfig +++ b/configs/P1010RDB-PA_NAND_defconfig @@ -4,6 +4,4 @@ CONFIG_TARGET_P1010RDB=y CONFIG_SPL=y CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PA_NOR_SECBOOT_defconfig b/configs/P1010RDB-PA_NOR_SECBOOT_defconfig index e681bc3..0f9092b 100644 --- a/configs/P1010RDB-PA_NOR_SECBOOT_defconfig +++ b/configs/P1010RDB-PA_NOR_SECBOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PA_NOR_defconfig b/configs/P1010RDB-PA_NOR_defconfig index d899655..643cc88 100644 --- a/configs/P1010RDB-PA_NOR_defconfig +++ b/configs/P1010RDB-PA_NOR_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PA_SDCARD_defconfig b/configs/P1010RDB-PA_SDCARD_defconfig index 2b52397..88044b1 100644 --- a/configs/P1010RDB-PA_SDCARD_defconfig +++ b/configs/P1010RDB-PA_SDCARD_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PA_SPIFLASH_SECBOOT_defconfig b/configs/P1010RDB-PA_SPIFLASH_SECBOOT_defconfig index 5756bb2..7ded62b 100644 --- a/configs/P1010RDB-PA_SPIFLASH_SECBOOT_defconfig +++ b/configs/P1010RDB-PA_SPIFLASH_SECBOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,SPIFLASH,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PA_SPIFLASH_defconfig b/configs/P1010RDB-PA_SPIFLASH_defconfig index 124ec69..7da4565 100644 --- a/configs/P1010RDB-PA_SPIFLASH_defconfig +++ b/configs/P1010RDB-PA_SPIFLASH_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,SPIFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_36BIT_NAND_SECBOOT_defconfig b/configs/P1010RDB-PB_36BIT_NAND_SECBOOT_defconfig index bd2a690..286f8da 100644 --- a/configs/P1010RDB-PB_36BIT_NAND_SECBOOT_defconfig +++ b/configs/P1010RDB-PB_36BIT_NAND_SECBOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,36BIT,NAND_SECBOOT,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_36BIT_NAND_defconfig b/configs/P1010RDB-PB_36BIT_NAND_defconfig index 2fca071..385265d 100644 --- a/configs/P1010RDB-PB_36BIT_NAND_defconfig +++ b/configs/P1010RDB-PB_36BIT_NAND_defconfig @@ -4,6 +4,4 @@ CONFIG_TARGET_P1010RDB=y CONFIG_SPL=y CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,36BIT,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_36BIT_NOR_SECBOOT_defconfig b/configs/P1010RDB-PB_36BIT_NOR_SECBOOT_defconfig index 0151fbe..93e7f89 100644 --- a/configs/P1010RDB-PB_36BIT_NOR_SECBOOT_defconfig +++ b/configs/P1010RDB-PB_36BIT_NOR_SECBOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,36BIT,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_36BIT_NOR_defconfig b/configs/P1010RDB-PB_36BIT_NOR_defconfig index 561f036..9176139 100644 --- a/configs/P1010RDB-PB_36BIT_NOR_defconfig +++ b/configs/P1010RDB-PB_36BIT_NOR_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,36BIT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_36BIT_SDCARD_defconfig b/configs/P1010RDB-PB_36BIT_SDCARD_defconfig index 44c5c27..fd1d4df 100644 --- a/configs/P1010RDB-PB_36BIT_SDCARD_defconfig +++ b/configs/P1010RDB-PB_36BIT_SDCARD_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,36BIT,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_36BIT_SPIFLASH_SECBOOT_defconfig b/configs/P1010RDB-PB_36BIT_SPIFLASH_SECBOOT_defconfig index d3f6a35..a0d7bac 100644 --- a/configs/P1010RDB-PB_36BIT_SPIFLASH_SECBOOT_defconfig +++ b/configs/P1010RDB-PB_36BIT_SPIFLASH_SECBOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,36BIT,SPIFLASH,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig b/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig index 4cbda7e..9dc5af2 100644 --- a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig +++ b/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,36BIT,SPIFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_NAND_SECBOOT_defconfig b/configs/P1010RDB-PB_NAND_SECBOOT_defconfig index 3c30ea0..3aa2ca0 100644 --- a/configs/P1010RDB-PB_NAND_SECBOOT_defconfig +++ b/configs/P1010RDB-PB_NAND_SECBOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,NAND_SECBOOT,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_NAND_defconfig b/configs/P1010RDB-PB_NAND_defconfig index 9219373..db41c51 100644 --- a/configs/P1010RDB-PB_NAND_defconfig +++ b/configs/P1010RDB-PB_NAND_defconfig @@ -4,6 +4,4 @@ CONFIG_TARGET_P1010RDB=y CONFIG_SPL=y CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_NOR_SECBOOT_defconfig b/configs/P1010RDB-PB_NOR_SECBOOT_defconfig index 277158b..80836a3 100644 --- a/configs/P1010RDB-PB_NOR_SECBOOT_defconfig +++ b/configs/P1010RDB-PB_NOR_SECBOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_NOR_defconfig b/configs/P1010RDB-PB_NOR_defconfig index 0361140..4ec3893 100644 --- a/configs/P1010RDB-PB_NOR_defconfig +++ b/configs/P1010RDB-PB_NOR_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_SDCARD_defconfig b/configs/P1010RDB-PB_SDCARD_defconfig index 2566f87..e938614 100644 --- a/configs/P1010RDB-PB_SDCARD_defconfig +++ b/configs/P1010RDB-PB_SDCARD_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_SPIFLASH_SECBOOT_defconfig b/configs/P1010RDB-PB_SPIFLASH_SECBOOT_defconfig index 43c4433..11f75b7 100644 --- a/configs/P1010RDB-PB_SPIFLASH_SECBOOT_defconfig +++ b/configs/P1010RDB-PB_SPIFLASH_SECBOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,SPIFLASH,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1010RDB-PB_SPIFLASH_defconfig b/configs/P1010RDB-PB_SPIFLASH_defconfig index 37f135c..b3a30e7 100644 --- a/configs/P1010RDB-PB_SPIFLASH_defconfig +++ b/configs/P1010RDB-PB_SPIFLASH_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,SPIFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1020MBG-PC_36BIT_SDCARD_defconfig b/configs/P1020MBG-PC_36BIT_SDCARD_defconfig index 64f77a7..59aa9be 100644 --- a/configs/P1020MBG-PC_36BIT_SDCARD_defconfig +++ b/configs/P1020MBG-PC_36BIT_SDCARD_defconfig @@ -3,5 +3,3 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1020MBG,SDCARD,36BIT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/P1020MBG-PC_36BIT_defconfig b/configs/P1020MBG-PC_36BIT_defconfig index c55bce6..b8d9c53 100644 --- a/configs/P1020MBG-PC_36BIT_defconfig +++ b/configs/P1020MBG-PC_36BIT_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SYS_EXTRA_OPTIONS="P1020MBG,36BIT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/P1020MBG-PC_SDCARD_defconfig b/configs/P1020MBG-PC_SDCARD_defconfig index bcd3513..0e64e82 100644 --- a/configs/P1020MBG-PC_SDCARD_defconfig +++ b/configs/P1020MBG-PC_SDCARD_defconfig @@ -3,5 +3,3 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1020MBG,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/P1020MBG-PC_defconfig b/configs/P1020MBG-PC_defconfig index 93b125f..905b94c 100644 --- a/configs/P1020MBG-PC_defconfig +++ b/configs/P1020MBG-PC_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SYS_EXTRA_OPTIONS="P1020MBG" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/P1020RDB-PC_36BIT_NAND_defconfig b/configs/P1020RDB-PC_36BIT_NAND_defconfig index b112f55..84934a8 100644 --- a/configs/P1020RDB-PC_36BIT_NAND_defconfig +++ b/configs/P1020RDB-PC_36BIT_NAND_defconfig @@ -4,6 +4,4 @@ CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,36BIT,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1020RDB-PC_36BIT_SDCARD_defconfig b/configs/P1020RDB-PC_36BIT_SDCARD_defconfig index d98d923..de86b76 100644 --- a/configs/P1020RDB-PC_36BIT_SDCARD_defconfig +++ b/configs/P1020RDB-PC_36BIT_SDCARD_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,36BIT,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig b/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig index 49b7ab8..3ed759f 100644 --- a/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig +++ b/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,36BIT,SPIFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1020RDB-PC_36BIT_defconfig b/configs/P1020RDB-PC_36BIT_defconfig index ea8a042..ca52331 100644 --- a/configs/P1020RDB-PC_36BIT_defconfig +++ b/configs/P1020RDB-PC_36BIT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,36BIT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1020RDB-PC_NAND_defconfig b/configs/P1020RDB-PC_NAND_defconfig index 26742ff..8391b4b 100644 --- a/configs/P1020RDB-PC_NAND_defconfig +++ b/configs/P1020RDB-PC_NAND_defconfig @@ -4,6 +4,4 @@ CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1020RDB-PC_SDCARD_defconfig b/configs/P1020RDB-PC_SDCARD_defconfig index 4df5c2b..7411c67 100644 --- a/configs/P1020RDB-PC_SDCARD_defconfig +++ b/configs/P1020RDB-PC_SDCARD_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1020RDB-PC_SPIFLASH_defconfig b/configs/P1020RDB-PC_SPIFLASH_defconfig index cb132a8..dc80723 100644 --- a/configs/P1020RDB-PC_SPIFLASH_defconfig +++ b/configs/P1020RDB-PC_SPIFLASH_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,SPIFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1020RDB-PC_defconfig b/configs/P1020RDB-PC_defconfig index 6675468..089bfae 100644 --- a/configs/P1020RDB-PC_defconfig +++ b/configs/P1020RDB-PC_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1020RDB-PD_NAND_defconfig b/configs/P1020RDB-PD_NAND_defconfig index 955290b..8f8660c 100644 --- a/configs/P1020RDB-PD_NAND_defconfig +++ b/configs/P1020RDB-PD_NAND_defconfig @@ -4,6 +4,4 @@ CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PD,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1020RDB-PD_SDCARD_defconfig b/configs/P1020RDB-PD_SDCARD_defconfig index 13a85ec..959d6d3 100644 --- a/configs/P1020RDB-PD_SDCARD_defconfig +++ b/configs/P1020RDB-PD_SDCARD_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PD,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1020RDB-PD_SPIFLASH_defconfig b/configs/P1020RDB-PD_SPIFLASH_defconfig index aaadab9..df4bc85 100644 --- a/configs/P1020RDB-PD_SPIFLASH_defconfig +++ b/configs/P1020RDB-PD_SPIFLASH_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PD,SPIFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1020RDB-PD_defconfig b/configs/P1020RDB-PD_defconfig index e2a9f7d..2ebb668 100644 --- a/configs/P1020RDB-PD_defconfig +++ b/configs/P1020RDB-PD_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1020UTM-PC_36BIT_SDCARD_defconfig b/configs/P1020UTM-PC_36BIT_SDCARD_defconfig index 3525a2e..f94345c 100644 --- a/configs/P1020UTM-PC_36BIT_SDCARD_defconfig +++ b/configs/P1020UTM-PC_36BIT_SDCARD_defconfig @@ -3,5 +3,3 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1020UTM,36BIT,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/P1020UTM-PC_36BIT_defconfig b/configs/P1020UTM-PC_36BIT_defconfig index 1e014f2..ac4bbd3 100644 --- a/configs/P1020UTM-PC_36BIT_defconfig +++ b/configs/P1020UTM-PC_36BIT_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SYS_EXTRA_OPTIONS="P1020UTM,36BIT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/P1020UTM-PC_SDCARD_defconfig b/configs/P1020UTM-PC_SDCARD_defconfig index 11e5803..c4cd42e7 100644 --- a/configs/P1020UTM-PC_SDCARD_defconfig +++ b/configs/P1020UTM-PC_SDCARD_defconfig @@ -3,5 +3,3 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1020UTM,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/P1020UTM-PC_defconfig b/configs/P1020UTM-PC_defconfig index 8b4a339..aae966b 100644 --- a/configs/P1020UTM-PC_defconfig +++ b/configs/P1020UTM-PC_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SYS_EXTRA_OPTIONS="P1020UTM" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/P1021RDB-PC_36BIT_NAND_defconfig b/configs/P1021RDB-PC_36BIT_NAND_defconfig index 35dd6e0..73f2f51 100644 --- a/configs/P1021RDB-PC_36BIT_NAND_defconfig +++ b/configs/P1021RDB-PC_36BIT_NAND_defconfig @@ -4,6 +4,4 @@ CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,36BIT,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1021RDB-PC_36BIT_SDCARD_defconfig b/configs/P1021RDB-PC_36BIT_SDCARD_defconfig index 702a2fd..5befdd9 100644 --- a/configs/P1021RDB-PC_36BIT_SDCARD_defconfig +++ b/configs/P1021RDB-PC_36BIT_SDCARD_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,36BIT,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig b/configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig index 4150b29..9838f09 100644 --- a/configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig +++ b/configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,36BIT,SPIFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1021RDB-PC_36BIT_defconfig b/configs/P1021RDB-PC_36BIT_defconfig index 8622a42..5fbc7ce 100644 --- a/configs/P1021RDB-PC_36BIT_defconfig +++ b/configs/P1021RDB-PC_36BIT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,36BIT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1021RDB-PC_NAND_defconfig b/configs/P1021RDB-PC_NAND_defconfig index 61bf58d..e238e05 100644 --- a/configs/P1021RDB-PC_NAND_defconfig +++ b/configs/P1021RDB-PC_NAND_defconfig @@ -4,6 +4,4 @@ CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1021RDB-PC_SDCARD_defconfig b/configs/P1021RDB-PC_SDCARD_defconfig index e9c597b..a7a45ec 100644 --- a/configs/P1021RDB-PC_SDCARD_defconfig +++ b/configs/P1021RDB-PC_SDCARD_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1021RDB-PC_SPIFLASH_defconfig b/configs/P1021RDB-PC_SPIFLASH_defconfig index 1fb2085..59ef5ea 100644 --- a/configs/P1021RDB-PC_SPIFLASH_defconfig +++ b/configs/P1021RDB-PC_SPIFLASH_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,SPIFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1021RDB-PC_defconfig b/configs/P1021RDB-PC_defconfig index 83326ce..543c28d 100644 --- a/configs/P1021RDB-PC_defconfig +++ b/configs/P1021RDB-PC_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SYS_EXTRA_OPTIONS="P1021RDB" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1022DS_36BIT_NAND_defconfig b/configs/P1022DS_36BIT_NAND_defconfig index 8e763fa..c0edafc 100644 --- a/configs/P1022DS_36BIT_NAND_defconfig +++ b/configs/P1022DS_36BIT_NAND_defconfig @@ -4,6 +4,4 @@ CONFIG_TARGET_P1022DS=y CONFIG_SPL=y CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="36BIT,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1022DS_36BIT_SDCARD_defconfig b/configs/P1022DS_36BIT_SDCARD_defconfig index d6b9f09..d85530e 100644 --- a/configs/P1022DS_36BIT_SDCARD_defconfig +++ b/configs/P1022DS_36BIT_SDCARD_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="36BIT,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1022DS_36BIT_SPIFLASH_defconfig b/configs/P1022DS_36BIT_SPIFLASH_defconfig index b3966ee..1be12cc 100644 --- a/configs/P1022DS_36BIT_SPIFLASH_defconfig +++ b/configs/P1022DS_36BIT_SPIFLASH_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="36BIT,SPIFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1022DS_36BIT_defconfig b/configs/P1022DS_36BIT_defconfig index cc7877b..08d7a6e 100644 --- a/configs/P1022DS_36BIT_defconfig +++ b/configs/P1022DS_36BIT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y CONFIG_SYS_EXTRA_OPTIONS="36BIT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1022DS_NAND_defconfig b/configs/P1022DS_NAND_defconfig index 253b19a..dbfb562 100644 --- a/configs/P1022DS_NAND_defconfig +++ b/configs/P1022DS_NAND_defconfig @@ -4,6 +4,4 @@ CONFIG_TARGET_P1022DS=y CONFIG_SPL=y CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1022DS_SDCARD_defconfig b/configs/P1022DS_SDCARD_defconfig index a959631..9cbcbd5 100644 --- a/configs/P1022DS_SDCARD_defconfig +++ b/configs/P1022DS_SDCARD_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1022DS_SPIFLASH_defconfig b/configs/P1022DS_SPIFLASH_defconfig index 79eba57..98a859c 100644 --- a/configs/P1022DS_SPIFLASH_defconfig +++ b/configs/P1022DS_SPIFLASH_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1022DS_defconfig b/configs/P1022DS_defconfig index 0252307..69a25f7 100644 --- a/configs/P1022DS_defconfig +++ b/configs/P1022DS_defconfig @@ -1,6 +1,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1023RDB_defconfig b/configs/P1023RDB_defconfig index fa8baa1..fc15e4b 100644 --- a/configs/P1023RDB_defconfig +++ b/configs/P1023RDB_defconfig @@ -1,5 +1,3 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1023RDB=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/P1024RDB_36BIT_defconfig b/configs/P1024RDB_36BIT_defconfig index fded3af..207d3de 100644 --- a/configs/P1024RDB_36BIT_defconfig +++ b/configs/P1024RDB_36BIT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SYS_EXTRA_OPTIONS="P1024RDB,36BIT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1024RDB_NAND_defconfig b/configs/P1024RDB_NAND_defconfig index e12b198..f69257c 100644 --- a/configs/P1024RDB_NAND_defconfig +++ b/configs/P1024RDB_NAND_defconfig @@ -4,6 +4,4 @@ CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="P1024RDB,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1024RDB_SDCARD_defconfig b/configs/P1024RDB_SDCARD_defconfig index 55283d6..d847a0a 100644 --- a/configs/P1024RDB_SDCARD_defconfig +++ b/configs/P1024RDB_SDCARD_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1024RDB,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1024RDB_SPIFLASH_defconfig b/configs/P1024RDB_SPIFLASH_defconfig index 438aa36..c22bfe1 100644 --- a/configs/P1024RDB_SPIFLASH_defconfig +++ b/configs/P1024RDB_SPIFLASH_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1024RDB,SPIFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1024RDB_defconfig b/configs/P1024RDB_defconfig index a7cc6ef..21a84e3 100644 --- a/configs/P1024RDB_defconfig +++ b/configs/P1024RDB_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SYS_EXTRA_OPTIONS="P1024RDB" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1025RDB_36BIT_defconfig b/configs/P1025RDB_36BIT_defconfig index 90abbfe..302d6e8 100644 --- a/configs/P1025RDB_36BIT_defconfig +++ b/configs/P1025RDB_36BIT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SYS_EXTRA_OPTIONS="P1025RDB,36BIT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1025RDB_NAND_defconfig b/configs/P1025RDB_NAND_defconfig index b7cfe0c..616225e 100644 --- a/configs/P1025RDB_NAND_defconfig +++ b/configs/P1025RDB_NAND_defconfig @@ -4,6 +4,4 @@ CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="P1025RDB,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1025RDB_SDCARD_defconfig b/configs/P1025RDB_SDCARD_defconfig index 9d76178..1ba3880 100644 --- a/configs/P1025RDB_SDCARD_defconfig +++ b/configs/P1025RDB_SDCARD_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1025RDB,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1025RDB_SPIFLASH_defconfig b/configs/P1025RDB_SPIFLASH_defconfig index a0b7b2d..df648aa 100644 --- a/configs/P1025RDB_SPIFLASH_defconfig +++ b/configs/P1025RDB_SPIFLASH_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P1025RDB,SPIFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P1025RDB_defconfig b/configs/P1025RDB_defconfig index 9f07753..a0d1a2c 100644 --- a/configs/P1025RDB_defconfig +++ b/configs/P1025RDB_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SYS_EXTRA_OPTIONS="P1025RDB" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P2020RDB-PC_36BIT_NAND_defconfig b/configs/P2020RDB-PC_36BIT_NAND_defconfig index 54e291c..2c4bea3 100644 --- a/configs/P2020RDB-PC_36BIT_NAND_defconfig +++ b/configs/P2020RDB-PC_36BIT_NAND_defconfig @@ -4,6 +4,4 @@ CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,36BIT,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P2020RDB-PC_36BIT_SDCARD_defconfig b/configs/P2020RDB-PC_36BIT_SDCARD_defconfig index e10a36e..9d110db 100644 --- a/configs/P2020RDB-PC_36BIT_SDCARD_defconfig +++ b/configs/P2020RDB-PC_36BIT_SDCARD_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,36BIT,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig b/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig index 44a1ca1..c41bbf9 100644 --- a/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig +++ b/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,36BIT,SPIFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P2020RDB-PC_36BIT_defconfig b/configs/P2020RDB-PC_36BIT_defconfig index a1e23f7..8ae1928 100644 --- a/configs/P2020RDB-PC_36BIT_defconfig +++ b/configs/P2020RDB-PC_36BIT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,36BIT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P2020RDB-PC_NAND_defconfig b/configs/P2020RDB-PC_NAND_defconfig index 1239d97..4492e09 100644 --- a/configs/P2020RDB-PC_NAND_defconfig +++ b/configs/P2020RDB-PC_NAND_defconfig @@ -4,6 +4,4 @@ CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_TPL=y CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P2020RDB-PC_SDCARD_defconfig b/configs/P2020RDB-PC_SDCARD_defconfig index d032c8a..95f3d91 100644 --- a/configs/P2020RDB-PC_SDCARD_defconfig +++ b/configs/P2020RDB-PC_SDCARD_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P2020RDB-PC_SPIFLASH_defconfig b/configs/P2020RDB-PC_SPIFLASH_defconfig index f3d1b80..d6f0548 100644 --- a/configs/P2020RDB-PC_SPIFLASH_defconfig +++ b/configs/P2020RDB-PC_SPIFLASH_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,SPIFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P2020RDB-PC_defconfig b/configs/P2020RDB-PC_defconfig index 957dbb5..f871019 100644 --- a/configs/P2020RDB-PC_defconfig +++ b/configs/P2020RDB-PC_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_SYS_EXTRA_OPTIONS="P2020RDB" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P2041RDB_NAND_defconfig b/configs/P2041RDB_NAND_defconfig index 6bab740..028235a 100644 --- a/configs/P2041RDB_NAND_defconfig +++ b/configs/P2041RDB_NAND_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P2041RDB=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P2041RDB_SDCARD_defconfig b/configs/P2041RDB_SDCARD_defconfig index 13b144a..ac1d678 100644 --- a/configs/P2041RDB_SDCARD_defconfig +++ b/configs/P2041RDB_SDCARD_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P2041RDB=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P2041RDB_SECURE_BOOT_defconfig b/configs/P2041RDB_SECURE_BOOT_defconfig index 306ddad..d0facae 100644 --- a/configs/P2041RDB_SECURE_BOOT_defconfig +++ b/configs/P2041RDB_SECURE_BOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P2041RDB=y CONFIG_SYS_EXTRA_OPTIONS="SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P2041RDB_SPIFLASH_defconfig b/configs/P2041RDB_SPIFLASH_defconfig index 8aba3e2..30953a7 100644 --- a/configs/P2041RDB_SPIFLASH_defconfig +++ b/configs/P2041RDB_SPIFLASH_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P2041RDB=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P2041RDB_SRIO_PCIE_BOOT_defconfig b/configs/P2041RDB_SRIO_PCIE_BOOT_defconfig index 68a406f..74abe7d 100644 --- a/configs/P2041RDB_SRIO_PCIE_BOOT_defconfig +++ b/configs/P2041RDB_SRIO_PCIE_BOOT_defconfig @@ -2,6 +2,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P2041RDB=y CONFIG_SYS_EXTRA_OPTIONS="SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/P2041RDB_defconfig b/configs/P2041RDB_defconfig index 8f0b1d4..b4b1489 100644 --- a/configs/P2041RDB_defconfig +++ b/configs/P2041RDB_defconfig @@ -1,6 +1,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P2041RDB=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P3041DS_NAND_defconfig b/configs/P3041DS_NAND_defconfig index 95eea20..a076390 100644 --- a/configs/P3041DS_NAND_defconfig +++ b/configs/P3041DS_NAND_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P3041DS=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P3041DS_SDCARD_defconfig b/configs/P3041DS_SDCARD_defconfig index 7eb7fa7..c16dc96 100644 --- a/configs/P3041DS_SDCARD_defconfig +++ b/configs/P3041DS_SDCARD_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P3041DS=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P3041DS_SECURE_BOOT_defconfig b/configs/P3041DS_SECURE_BOOT_defconfig index d069b5b..7c76951 100644 --- a/configs/P3041DS_SECURE_BOOT_defconfig +++ b/configs/P3041DS_SECURE_BOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P3041DS=y CONFIG_SYS_EXTRA_OPTIONS="SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P3041DS_SPIFLASH_defconfig b/configs/P3041DS_SPIFLASH_defconfig index ca99160..26e45f6 100644 --- a/configs/P3041DS_SPIFLASH_defconfig +++ b/configs/P3041DS_SPIFLASH_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P3041DS=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P3041DS_SRIO_PCIE_BOOT_defconfig b/configs/P3041DS_SRIO_PCIE_BOOT_defconfig index 6d8cec8..71db82d 100644 --- a/configs/P3041DS_SRIO_PCIE_BOOT_defconfig +++ b/configs/P3041DS_SRIO_PCIE_BOOT_defconfig @@ -2,6 +2,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P3041DS=y CONFIG_SYS_EXTRA_OPTIONS="SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/P3041DS_defconfig b/configs/P3041DS_defconfig index 9d567db..0879537 100644 --- a/configs/P3041DS_defconfig +++ b/configs/P3041DS_defconfig @@ -1,6 +1,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P3041DS=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P4080DS_SDCARD_defconfig b/configs/P4080DS_SDCARD_defconfig index 30eb293..1e8bbf7 100644 --- a/configs/P4080DS_SDCARD_defconfig +++ b/configs/P4080DS_SDCARD_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P4080DS=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P4080DS_SECURE_BOOT_defconfig b/configs/P4080DS_SECURE_BOOT_defconfig index cf7d6cd..33a9fd6 100644 --- a/configs/P4080DS_SECURE_BOOT_defconfig +++ b/configs/P4080DS_SECURE_BOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P4080DS=y CONFIG_SYS_EXTRA_OPTIONS="SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P4080DS_SPIFLASH_defconfig b/configs/P4080DS_SPIFLASH_defconfig index 7004e92..e55be85 100644 --- a/configs/P4080DS_SPIFLASH_defconfig +++ b/configs/P4080DS_SPIFLASH_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P4080DS=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P4080DS_SRIO_PCIE_BOOT_defconfig b/configs/P4080DS_SRIO_PCIE_BOOT_defconfig index f363d3e..b3f6b69 100644 --- a/configs/P4080DS_SRIO_PCIE_BOOT_defconfig +++ b/configs/P4080DS_SRIO_PCIE_BOOT_defconfig @@ -2,6 +2,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P4080DS=y CONFIG_SYS_EXTRA_OPTIONS="SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/P4080DS_defconfig b/configs/P4080DS_defconfig index 233efa5..5e5cea9 100644 --- a/configs/P4080DS_defconfig +++ b/configs/P4080DS_defconfig @@ -1,6 +1,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P4080DS=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P5020DS_NAND_defconfig b/configs/P5020DS_NAND_defconfig index 3f68674..a071029 100644 --- a/configs/P5020DS_NAND_defconfig +++ b/configs/P5020DS_NAND_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P5020DS=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P5020DS_SDCARD_defconfig b/configs/P5020DS_SDCARD_defconfig index f13b634..5431491 100644 --- a/configs/P5020DS_SDCARD_defconfig +++ b/configs/P5020DS_SDCARD_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P5020DS=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P5020DS_SECURE_BOOT_defconfig b/configs/P5020DS_SECURE_BOOT_defconfig index 6552ba8..26a418a 100644 --- a/configs/P5020DS_SECURE_BOOT_defconfig +++ b/configs/P5020DS_SECURE_BOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P5020DS=y CONFIG_SYS_EXTRA_OPTIONS="SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P5020DS_SPIFLASH_defconfig b/configs/P5020DS_SPIFLASH_defconfig index 3ba0c35..65f0708 100644 --- a/configs/P5020DS_SPIFLASH_defconfig +++ b/configs/P5020DS_SPIFLASH_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P5020DS=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P5020DS_SRIO_PCIE_BOOT_defconfig b/configs/P5020DS_SRIO_PCIE_BOOT_defconfig index 9106466..66b7d6f 100644 --- a/configs/P5020DS_SRIO_PCIE_BOOT_defconfig +++ b/configs/P5020DS_SRIO_PCIE_BOOT_defconfig @@ -2,6 +2,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P5020DS=y CONFIG_SYS_EXTRA_OPTIONS="SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/P5020DS_defconfig b/configs/P5020DS_defconfig index c4d6a2c..a6d8839 100644 --- a/configs/P5020DS_defconfig +++ b/configs/P5020DS_defconfig @@ -1,6 +1,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P5020DS=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P5040DS_NAND_defconfig b/configs/P5040DS_NAND_defconfig index 0a9ff2d..0d61782 100644 --- a/configs/P5040DS_NAND_defconfig +++ b/configs/P5040DS_NAND_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P5040DS=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P5040DS_SDCARD_defconfig b/configs/P5040DS_SDCARD_defconfig index cc40316..498fe51 100644 --- a/configs/P5040DS_SDCARD_defconfig +++ b/configs/P5040DS_SDCARD_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P5040DS=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF40000" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P5040DS_SECURE_BOOT_defconfig b/configs/P5040DS_SECURE_BOOT_defconfig index da1e300..54d9b80 100644 --- a/configs/P5040DS_SECURE_BOOT_defconfig +++ b/configs/P5040DS_SECURE_BOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P5040DS=y CONFIG_SYS_EXTRA_OPTIONS="SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P5040DS_SPIFLASH_defconfig b/configs/P5040DS_SPIFLASH_defconfig index 8fb6e78..9a37c0e 100644 --- a/configs/P5040DS_SPIFLASH_defconfig +++ b/configs/P5040DS_SPIFLASH_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P5040DS=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/P5040DS_defconfig b/configs/P5040DS_defconfig index 9b83d0b..6df742e 100644 --- a/configs/P5040DS_defconfig +++ b/configs/P5040DS_defconfig @@ -1,6 +1,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P5040DS=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/PATI_defconfig b/configs/PATI_defconfig index 14ca871..da8525e 100644 --- a/configs/PATI_defconfig +++ b/configs/PATI_defconfig @@ -1,3 +1,15 @@ CONFIG_PPC=y CONFIG_5xx=y CONFIG_TARGET_PATI=y +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/PIP405_defconfig b/configs/PIP405_defconfig index 1aec3cb..ced7d1a 100644 --- a/configs/PIP405_defconfig +++ b/configs/PIP405_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_PIP405=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/PLU405_defconfig b/configs/PLU405_defconfig index 50f52a3..a691e24 100644 --- a/configs/PLU405_defconfig +++ b/configs/PLU405_defconfig @@ -4,4 +4,4 @@ CONFIG_TARGET_PLU405=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/PMC405DE_defconfig b/configs/PMC405DE_defconfig index 1246542..37b2d23 100644 --- a/configs/PMC405DE_defconfig +++ b/configs/PMC405DE_defconfig @@ -4,4 +4,4 @@ CONFIG_TARGET_PMC405DE=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/PMC440_defconfig b/configs/PMC440_defconfig index bca6fc0..96ff54c 100644 --- a/configs/PMC440_defconfig +++ b/configs/PMC440_defconfig @@ -4,4 +4,4 @@ CONFIG_TARGET_PMC440=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/T1023RDB_NAND_defconfig b/configs/T1023RDB_NAND_defconfig index d9f72e5..3ee42d6 100644 --- a/configs/T1023RDB_NAND_defconfig +++ b/configs/T1023RDB_NAND_defconfig @@ -3,6 +3,6 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1023,T1023RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/T1023RDB_SDCARD_defconfig b/configs/T1023RDB_SDCARD_defconfig index 3f8e04c..ed67945 100644 --- a/configs/T1023RDB_SDCARD_defconfig +++ b/configs/T1023RDB_SDCARD_defconfig @@ -3,6 +3,6 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1023,T1023RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/T1023RDB_SECURE_BOOT_defconfig b/configs/T1023RDB_SECURE_BOOT_defconfig index 49979b3..76e3e91 100644 --- a/configs/T1023RDB_SECURE_BOOT_defconfig +++ b/configs/T1023RDB_SECURE_BOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1023,T1023RDB,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T1023RDB_SPIFLASH_defconfig b/configs/T1023RDB_SPIFLASH_defconfig index cb45acb..e7f4525 100644 --- a/configs/T1023RDB_SPIFLASH_defconfig +++ b/configs/T1023RDB_SPIFLASH_defconfig @@ -3,6 +3,6 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1023,T1023RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/T1023RDB_defconfig b/configs/T1023RDB_defconfig index abb7c3f..8ff03a5 100644 --- a/configs/T1023RDB_defconfig +++ b/configs/T1023RDB_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1023,T1023RDB" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T1024QDS_D4_SECURE_BOOT_defconfig b/configs/T1024QDS_D4_SECURE_BOOT_defconfig index 0585b6a..06a9619 100644 --- a/configs/T1024QDS_D4_SECURE_BOOT_defconfig +++ b/configs/T1024QDS_D4_SECURE_BOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XQDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,SYS_FSL_DDR4,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T1024QDS_NAND_defconfig b/configs/T1024QDS_NAND_defconfig index c4ddf7a..c49facf 100644 --- a/configs/T1024QDS_NAND_defconfig +++ b/configs/T1024QDS_NAND_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T102XQDS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,RAMBOOT_PBL,SPL_FSL_PBL,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T1024QDS_SDCARD_defconfig b/configs/T1024QDS_SDCARD_defconfig index 8e384ac..3a3beb1 100644 --- a/configs/T1024QDS_SDCARD_defconfig +++ b/configs/T1024QDS_SDCARD_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T102XQDS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T1024QDS_SECURE_BOOT_defconfig b/configs/T1024QDS_SECURE_BOOT_defconfig index a4d594a..b0890a4 100644 --- a/configs/T1024QDS_SECURE_BOOT_defconfig +++ b/configs/T1024QDS_SECURE_BOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XQDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T1024QDS_SPIFLASH_defconfig b/configs/T1024QDS_SPIFLASH_defconfig index dc043f9..df3ca94 100644 --- a/configs/T1024QDS_SPIFLASH_defconfig +++ b/configs/T1024QDS_SPIFLASH_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T102XQDS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T1024QDS_defconfig b/configs/T1024QDS_defconfig index b9f875c..93588b7 100644 --- a/configs/T1024QDS_defconfig +++ b/configs/T1024QDS_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XQDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T1024RDB_NAND_defconfig b/configs/T1024RDB_NAND_defconfig index db1262e..6f4f026 100644 --- a/configs/T1024RDB_NAND_defconfig +++ b/configs/T1024RDB_NAND_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,T1024RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T1024RDB_SDCARD_defconfig b/configs/T1024RDB_SDCARD_defconfig index dd80c76..53c5c8c 100644 --- a/configs/T1024RDB_SDCARD_defconfig +++ b/configs/T1024RDB_SDCARD_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,T1024RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T1024RDB_SECURE_BOOT_defconfig b/configs/T1024RDB_SECURE_BOOT_defconfig index 5c2fe2a..65e9a5a 100644 --- a/configs/T1024RDB_SECURE_BOOT_defconfig +++ b/configs/T1024RDB_SECURE_BOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,T1024RDB,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T1024RDB_SPIFLASH_defconfig b/configs/T1024RDB_SPIFLASH_defconfig index 9157945..60aee0d 100644 --- a/configs/T1024RDB_SPIFLASH_defconfig +++ b/configs/T1024RDB_SPIFLASH_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,T1024RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T1024RDB_defconfig b/configs/T1024RDB_defconfig index ac0b8c1..2da2ea7 100644 --- a/configs/T1024RDB_defconfig +++ b/configs/T1024RDB_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,T1024RDB" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T1040QDS_D4_defconfig b/configs/T1040QDS_D4_defconfig index 5a80d6b..31b3b10 100644 --- a/configs/T1040QDS_D4_defconfig +++ b/configs/T1040QDS_D4_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T1040QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,SYS_FSL_DDR4" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T1040QDS_SECURE_BOOT_defconfig b/configs/T1040QDS_SECURE_BOOT_defconfig index 6ad6182..abb876f 100644 --- a/configs/T1040QDS_SECURE_BOOT_defconfig +++ b/configs/T1040QDS_SECURE_BOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T1040QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T1040QDS_defconfig b/configs/T1040QDS_defconfig index dee5c36..3766524 100644 --- a/configs/T1040QDS_defconfig +++ b/configs/T1040QDS_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T1040QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T1040RDB_NAND_defconfig b/configs/T1040RDB_NAND_defconfig index 3a1bb2b..d4883b8 100644 --- a/configs/T1040RDB_NAND_defconfig +++ b/configs/T1040RDB_NAND_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T1040RDB_SDCARD_defconfig b/configs/T1040RDB_SDCARD_defconfig index 3247915..46e7c72 100644 --- a/configs/T1040RDB_SDCARD_defconfig +++ b/configs/T1040RDB_SDCARD_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T1040RDB_SECURE_BOOT_defconfig b/configs/T1040RDB_SECURE_BOOT_defconfig index 6faadec..8995e89 100644 --- a/configs/T1040RDB_SECURE_BOOT_defconfig +++ b/configs/T1040RDB_SECURE_BOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,SECURE_BOOT,T1040RDB" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T1040RDB_SPIFLASH_defconfig b/configs/T1040RDB_SPIFLASH_defconfig index 3a68fe2..e0956b3 100644 --- a/configs/T1040RDB_SPIFLASH_defconfig +++ b/configs/T1040RDB_SPIFLASH_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T1040RDB_defconfig b/configs/T1040RDB_defconfig index a348ad8..3ae358d 100644 --- a/configs/T1040RDB_defconfig +++ b/configs/T1040RDB_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040RDB" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T1042RDB_PI_NAND_defconfig b/configs/T1042RDB_PI_NAND_defconfig index 2944aff..04af1b8 100644 --- a/configs/T1042RDB_PI_NAND_defconfig +++ b/configs/T1042RDB_PI_NAND_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042RDB_PI,RAMBOOT_PBL,SPL_FSL_PBL,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T1042RDB_PI_SDCARD_defconfig b/configs/T1042RDB_PI_SDCARD_defconfig index 8272cff..cf093fd 100644 --- a/configs/T1042RDB_PI_SDCARD_defconfig +++ b/configs/T1042RDB_PI_SDCARD_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042RDB_PI,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T1042RDB_PI_SPIFLASH_defconfig b/configs/T1042RDB_PI_SPIFLASH_defconfig index 8c2e6fa..aba0d18 100644 --- a/configs/T1042RDB_PI_SPIFLASH_defconfig +++ b/configs/T1042RDB_PI_SPIFLASH_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042RDB_PI,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T1042RDB_PI_defconfig b/configs/T1042RDB_PI_defconfig index 626d0fa..7ad65ba 100644 --- a/configs/T1042RDB_PI_defconfig +++ b/configs/T1042RDB_PI_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042RDB_PI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T1042RDB_SECURE_BOOT_defconfig b/configs/T1042RDB_SECURE_BOOT_defconfig index 36ac136..639fc94 100644 --- a/configs/T1042RDB_SECURE_BOOT_defconfig +++ b/configs/T1042RDB_SECURE_BOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,SECURE_BOOT,T1042RDB" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T1042RDB_defconfig b/configs/T1042RDB_defconfig index 6451b31..670c87a 100644 --- a/configs/T1042RDB_defconfig +++ b/configs/T1042RDB_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042RDB" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T2080QDS_NAND_defconfig b/configs/T2080QDS_NAND_defconfig index 21c6eae..e6b1f46 100644 --- a/configs/T2080QDS_NAND_defconfig +++ b/configs/T2080QDS_NAND_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T2080QDS_SDCARD_defconfig b/configs/T2080QDS_SDCARD_defconfig index c3a5416..d48eb87 100644 --- a/configs/T2080QDS_SDCARD_defconfig +++ b/configs/T2080QDS_SDCARD_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T2080QDS_SECURE_BOOT_defconfig b/configs/T2080QDS_SECURE_BOOT_defconfig index 1607864..5f9a72b 100644 --- a/configs/T2080QDS_SECURE_BOOT_defconfig +++ b/configs/T2080QDS_SECURE_BOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T2080QDS_SPIFLASH_defconfig b/configs/T2080QDS_SPIFLASH_defconfig index 9b29955..c0251af 100644 --- a/configs/T2080QDS_SPIFLASH_defconfig +++ b/configs/T2080QDS_SPIFLASH_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig b/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig index e208015..018ee6f 100644 --- a/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig +++ b/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig @@ -2,6 +2,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/T2080QDS_defconfig b/configs/T2080QDS_defconfig index d85957a..eaa0792 100644 --- a/configs/T2080QDS_defconfig +++ b/configs/T2080QDS_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T2080RDB_NAND_defconfig b/configs/T2080RDB_NAND_defconfig index 292ca5e..512d60f 100644 --- a/configs/T2080RDB_NAND_defconfig +++ b/configs/T2080RDB_NAND_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T208XRDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T2080RDB_SDCARD_defconfig b/configs/T2080RDB_SDCARD_defconfig index 8cbc37b..d6fc340 100644 --- a/configs/T2080RDB_SDCARD_defconfig +++ b/configs/T2080RDB_SDCARD_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T208XRDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T2080RDB_SECURE_BOOT_defconfig b/configs/T2080RDB_SECURE_BOOT_defconfig index 373d57a..28183f6 100644 --- a/configs/T2080RDB_SECURE_BOOT_defconfig +++ b/configs/T2080RDB_SECURE_BOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XRDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T2080RDB_SPIFLASH_defconfig b/configs/T2080RDB_SPIFLASH_defconfig index 7d423d4..9733b36 100644 --- a/configs/T2080RDB_SPIFLASH_defconfig +++ b/configs/T2080RDB_SPIFLASH_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T208XRDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T2080RDB_SRIO_PCIE_BOOT_defconfig b/configs/T2080RDB_SRIO_PCIE_BOOT_defconfig index df747c4..56e5ce1 100644 --- a/configs/T2080RDB_SRIO_PCIE_BOOT_defconfig +++ b/configs/T2080RDB_SRIO_PCIE_BOOT_defconfig @@ -2,6 +2,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XRDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/T2080RDB_defconfig b/configs/T2080RDB_defconfig index 598d08a..2475ce3 100644 --- a/configs/T2080RDB_defconfig +++ b/configs/T2080RDB_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XRDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2080" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T2081QDS_NAND_defconfig b/configs/T2081QDS_NAND_defconfig index c4cc522..591b700 100644 --- a/configs/T2081QDS_NAND_defconfig +++ b/configs/T2081QDS_NAND_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2081,RAMBOOT_PBL,SPL_FSL_PBL,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T2081QDS_SDCARD_defconfig b/configs/T2081QDS_SDCARD_defconfig index b1848d5..45c7bca 100644 --- a/configs/T2081QDS_SDCARD_defconfig +++ b/configs/T2081QDS_SDCARD_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2081,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T2081QDS_SPIFLASH_defconfig b/configs/T2081QDS_SPIFLASH_defconfig index 82cc518..2784df6 100644 --- a/configs/T2081QDS_SPIFLASH_defconfig +++ b/configs/T2081QDS_SPIFLASH_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2081,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T2081QDS_SRIO_PCIE_BOOT_defconfig b/configs/T2081QDS_SRIO_PCIE_BOOT_defconfig index 33f9989..55fd6cc 100644 --- a/configs/T2081QDS_SRIO_PCIE_BOOT_defconfig +++ b/configs/T2081QDS_SRIO_PCIE_BOOT_defconfig @@ -2,6 +2,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2081,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/T2081QDS_defconfig b/configs/T2081QDS_defconfig index 54f397c..5942524 100644 --- a/configs/T2081QDS_defconfig +++ b/configs/T2081QDS_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T2081" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T4160QDS_NAND_defconfig b/configs/T4160QDS_NAND_defconfig index f06b2d9..16cda07 100644 --- a/configs/T4160QDS_NAND_defconfig +++ b/configs/T4160QDS_NAND_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T4240QDS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4160,RAMBOOT_PBL,SPL_FSL_PBL,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T4160QDS_SDCARD_defconfig b/configs/T4160QDS_SDCARD_defconfig index 3bca2a3..d23c887 100644 --- a/configs/T4160QDS_SDCARD_defconfig +++ b/configs/T4160QDS_SDCARD_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T4240QDS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4160,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T4160QDS_SECURE_BOOT_defconfig b/configs/T4160QDS_SECURE_BOOT_defconfig index 88af280..0fe99d2 100644 --- a/configs/T4160QDS_SECURE_BOOT_defconfig +++ b/configs/T4160QDS_SECURE_BOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T4240QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4160,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T4160QDS_defconfig b/configs/T4160QDS_defconfig index a0bfef3..bab1712 100644 --- a/configs/T4160QDS_defconfig +++ b/configs/T4160QDS_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T4240QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4160" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T4160RDB_defconfig b/configs/T4160RDB_defconfig index 26707f4..9ca984c 100644 --- a/configs/T4160RDB_defconfig +++ b/configs/T4160RDB_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T4240RDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4160" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T4240QDS_NAND_defconfig b/configs/T4240QDS_NAND_defconfig index aa3d1c8..130a614 100644 --- a/configs/T4240QDS_NAND_defconfig +++ b/configs/T4240QDS_NAND_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T4240QDS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4240,RAMBOOT_PBL,SPL_FSL_PBL,NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T4240QDS_SDCARD_defconfig b/configs/T4240QDS_SDCARD_defconfig index 6e2c7cd..8eb5577 100644 --- a/configs/T4240QDS_SDCARD_defconfig +++ b/configs/T4240QDS_SDCARD_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T4240QDS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4240,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T4240QDS_SECURE_BOOT_defconfig b/configs/T4240QDS_SECURE_BOOT_defconfig index d49b3ca..d983e9a 100644 --- a/configs/T4240QDS_SECURE_BOOT_defconfig +++ b/configs/T4240QDS_SECURE_BOOT_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T4240QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4240,SECURE_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T4240QDS_SRIO_PCIE_BOOT_defconfig b/configs/T4240QDS_SRIO_PCIE_BOOT_defconfig index 10a8261..edd083a 100644 --- a/configs/T4240QDS_SRIO_PCIE_BOOT_defconfig +++ b/configs/T4240QDS_SRIO_PCIE_BOOT_defconfig @@ -2,6 +2,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T4240QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4240,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/T4240QDS_defconfig b/configs/T4240QDS_defconfig index bd204db..cd9df0f 100644 --- a/configs/T4240QDS_defconfig +++ b/configs/T4240QDS_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T4240QDS=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4240" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T4240RDB_SDCARD_defconfig b/configs/T4240RDB_SDCARD_defconfig index 1bbe564..09f8f65 100644 --- a/configs/T4240RDB_SDCARD_defconfig +++ b/configs/T4240RDB_SDCARD_defconfig @@ -3,6 +3,4 @@ CONFIG_MPC85xx=y CONFIG_TARGET_T4240RDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4240,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/T4240RDB_defconfig b/configs/T4240RDB_defconfig index 932e970..e1abd8a 100644 --- a/configs/T4240RDB_defconfig +++ b/configs/T4240RDB_defconfig @@ -2,6 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_T4240RDB=y CONFIG_SYS_EXTRA_OPTIONS="PPC_T4240" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/TQM5200S_HIGHBOOT_defconfig b/configs/TQM5200S_HIGHBOOT_defconfig index e81759a..4c38482 100644 --- a/configs/TQM5200S_HIGHBOOT_defconfig +++ b/configs/TQM5200S_HIGHBOOT_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_TQM5200=y CONFIG_SYS_EXTRA_OPTIONS="TQM5200_B,TQM5200S,SYS_TEXT_BASE=0xFFF00000" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/TQM5200S_defconfig b/configs/TQM5200S_defconfig index 4bae198..a01bd39 100644 --- a/configs/TQM5200S_defconfig +++ b/configs/TQM5200S_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_TQM5200=y CONFIG_SYS_EXTRA_OPTIONS="TQM5200_B,TQM5200S" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/TQM5200_B_HIGHBOOT_defconfig b/configs/TQM5200_B_HIGHBOOT_defconfig index 5c64746..dac1eef 100644 --- a/configs/TQM5200_B_HIGHBOOT_defconfig +++ b/configs/TQM5200_B_HIGHBOOT_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_TQM5200=y CONFIG_SYS_EXTRA_OPTIONS="TQM5200_B,SYS_TEXT_BASE=0xFFF00000" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/TQM5200_B_defconfig b/configs/TQM5200_B_defconfig index 331dcab..8417ce2 100644 --- a/configs/TQM5200_B_defconfig +++ b/configs/TQM5200_B_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_TQM5200=y CONFIG_SYS_EXTRA_OPTIONS="TQM5200_B" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/TQM5200_STK100_defconfig b/configs/TQM5200_STK100_defconfig index e384834..9e381f4 100644 --- a/configs/TQM5200_STK100_defconfig +++ b/configs/TQM5200_STK100_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_TQM5200=y CONFIG_SYS_EXTRA_OPTIONS="STK52XX_REV100" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/TQM5200_defconfig b/configs/TQM5200_defconfig index 6a4d25e..d82a5be 100644 --- a/configs/TQM5200_defconfig +++ b/configs/TQM5200_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_TQM5200=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/TQM823L_LCD_defconfig b/configs/TQM823L_LCD_defconfig index 94bda12..ebe9bdf 100644 --- a/configs/TQM823L_LCD_defconfig +++ b/configs/TQM823L_LCD_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_8xx=y CONFIG_TARGET_TQM823L=y CONFIG_SYS_EXTRA_OPTIONS="LCD,NEC_NL6448BC20" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/TQM823L_defconfig b/configs/TQM823L_defconfig index 96e16c6..05e69c3 100644 --- a/configs/TQM823L_defconfig +++ b/configs/TQM823L_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_8xx=y CONFIG_TARGET_TQM823L=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/TQM823M_defconfig b/configs/TQM823M_defconfig index b4bd8e9..4c9ead8 100644 --- a/configs/TQM823M_defconfig +++ b/configs/TQM823M_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_8xx=y CONFIG_TARGET_TQM823M=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/TQM834x_defconfig b/configs/TQM834x_defconfig index d2c4bd5..c980d95 100644 --- a/configs/TQM834x_defconfig +++ b/configs/TQM834x_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_TQM834X=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/TQM850L_defconfig b/configs/TQM850L_defconfig index 06cc72c..47c4070 100644 --- a/configs/TQM850L_defconfig +++ b/configs/TQM850L_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_8xx=y CONFIG_TARGET_TQM850L=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/TQM850M_defconfig b/configs/TQM850M_defconfig index 5f8d89d..e4784b5 100644 --- a/configs/TQM850M_defconfig +++ b/configs/TQM850M_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_8xx=y CONFIG_TARGET_TQM850M=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/TQM855L_defconfig b/configs/TQM855L_defconfig index 6858682..e0b03af 100644 --- a/configs/TQM855L_defconfig +++ b/configs/TQM855L_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_8xx=y CONFIG_TARGET_TQM855L=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/TQM855M_defconfig b/configs/TQM855M_defconfig index 460f91b..32496bf 100644 --- a/configs/TQM855M_defconfig +++ b/configs/TQM855M_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_8xx=y CONFIG_TARGET_TQM855M=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/TQM860L_defconfig b/configs/TQM860L_defconfig index 2178a1a..b83a07b 100644 --- a/configs/TQM860L_defconfig +++ b/configs/TQM860L_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_8xx=y CONFIG_TARGET_TQM860L=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/TQM860M_defconfig b/configs/TQM860M_defconfig index d262d6f..d95ad79 100644 --- a/configs/TQM860M_defconfig +++ b/configs/TQM860M_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_8xx=y CONFIG_TARGET_TQM860M=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/TQM862L_defconfig b/configs/TQM862L_defconfig index b85f6be..75c8801 100644 --- a/configs/TQM862L_defconfig +++ b/configs/TQM862L_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_8xx=y CONFIG_TARGET_TQM862L=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/TQM862M_defconfig b/configs/TQM862M_defconfig index 81fba41..d5f8222 100644 --- a/configs/TQM862M_defconfig +++ b/configs/TQM862M_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_8xx=y CONFIG_TARGET_TQM862M=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/TQM866M_defconfig b/configs/TQM866M_defconfig index c644f87..74f12e2 100644 --- a/configs/TQM866M_defconfig +++ b/configs/TQM866M_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_8xx=y CONFIG_TARGET_TQM866M=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/TQM885D_defconfig b/configs/TQM885D_defconfig index a1a2fbb..bcad969 100644 --- a/configs/TQM885D_defconfig +++ b/configs/TQM885D_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_8xx=y CONFIG_TARGET_TQM885D=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/TTTech_defconfig b/configs/TTTech_defconfig index cec9f2d..d239a73 100644 --- a/configs/TTTech_defconfig +++ b/configs/TTTech_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_8xx=y CONFIG_TARGET_TQM823L=y CONFIG_SYS_EXTRA_OPTIONS="LCD,SHARP_LQ104V7DS01" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/TWR-P1025_defconfig b/configs/TWR-P1025_defconfig index 1456929..c86900a 100644 --- a/configs/TWR-P1025_defconfig +++ b/configs/TWR-P1025_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_TWR=y CONFIG_SYS_EXTRA_OPTIONS="TWR_P1025" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/TZX-Q8-713B7_defconfig b/configs/TZX-Q8-713B7_defconfig index 08f9153..68961fc 100644 --- a/configs/TZX-Q8-713B7_defconfig +++ b/configs/TZX-Q8-713B7_defconfig @@ -15,8 +15,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-tzx-q8-713b7" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y diff --git a/configs/UCP1020_SPIFLASH_defconfig b/configs/UCP1020_SPIFLASH_defconfig index 779c7a3..9e41048 100644 --- a/configs/UCP1020_SPIFLASH_defconfig +++ b/configs/UCP1020_SPIFLASH_defconfig @@ -5,6 +5,4 @@ CONFIG_TARGET_UCP1020_SPIFLASH=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/UCP1020_defconfig b/configs/UCP1020_defconfig index 60f7aa3..010b15f 100644 --- a/configs/UCP1020_defconfig +++ b/configs/UCP1020_defconfig @@ -4,6 +4,4 @@ CONFIG_TARGET_UCP1020=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_SPI_FLASH=y diff --git a/configs/UTOO_P66_defconfig b/configs/UTOO_P66_defconfig index a124df7..c3b13b7 100644 --- a/configs/UTOO_P66_defconfig +++ b/configs/UTOO_P66_defconfig @@ -20,7 +20,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-utoo-p66" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y diff --git a/configs/VCMA9_defconfig b/configs/VCMA9_defconfig index 3cc4185..8885f1a 100644 --- a/configs/VCMA9_defconfig +++ b/configs/VCMA9_defconfig @@ -1,3 +1,3 @@ CONFIG_ARM=y CONFIG_TARGET_VCMA9=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/VOM405_defconfig b/configs/VOM405_defconfig index e439997..ba3ade0 100644 --- a/configs/VOM405_defconfig +++ b/configs/VOM405_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_VOM405=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/Wexler_TAB7200_defconfig b/configs/Wexler_TAB7200_defconfig index 2df27dd..d9180c7 100644 --- a/configs/Wexler_TAB7200_defconfig +++ b/configs/Wexler_TAB7200_defconfig @@ -10,10 +10,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wexler-tab7200" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/Wits_Pro_A20_DKT_defconfig b/configs/Wits_Pro_A20_DKT_defconfig index b443938..bb8dd29 100644 --- a/configs/Wits_Pro_A20_DKT_defconfig +++ b/configs/Wits_Pro_A20_DKT_defconfig @@ -12,10 +12,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wits-pro-a20-dkt" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_DM_SERIAL=y CONFIG_USB=y diff --git a/configs/Yones_Toptech_BD1078_defconfig b/configs/Yones_Toptech_BD1078_defconfig index 341748a..aab580e 100644 --- a/configs/Yones_Toptech_BD1078_defconfig +++ b/configs/Yones_Toptech_BD1078_defconfig @@ -21,8 +21,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-yones-toptech-bd1078" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y diff --git a/configs/a3m071_defconfig b/configs/a3m071_defconfig index c5df596..3a6188e 100644 --- a/configs/a3m071_defconfig +++ b/configs/a3m071_defconfig @@ -1,6 +1,6 @@ CONFIG_PPC=y -CONFIG_CMD_NET=y CONFIG_MPC5xxx=y CONFIG_TARGET_A3M071=y CONFIG_SPL=y +# CONFIG_CMD_SETEXPR is not set CONFIG_LIB_RAND=y diff --git a/configs/a4m072_defconfig b/configs/a4m072_defconfig index 3744669..4a02293 100644 --- a/configs/a4m072_defconfig +++ b/configs/a4m072_defconfig @@ -4,4 +4,4 @@ CONFIG_TARGET_A4M072=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="asdfg" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/a4m2k_defconfig b/configs/a4m2k_defconfig index de47756..22db933 100644 --- a/configs/a4m2k_defconfig +++ b/configs/a4m2k_defconfig @@ -1,7 +1,7 @@ CONFIG_PPC=y -CONFIG_CMD_NET=y CONFIG_MPC5xxx=y CONFIG_TARGET_A3M071=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="A4M2K" +# CONFIG_CMD_SETEXPR is not set CONFIG_LIB_RAND=y diff --git a/configs/ac14xx_defconfig b/configs/ac14xx_defconfig index 121883f..37fb0e0 100644 --- a/configs/ac14xx_defconfig +++ b/configs/ac14xx_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC512X=y CONFIG_TARGET_AC14XX=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/acadia_defconfig b/configs/acadia_defconfig index e869b26..26221ce 100644 --- a/configs/acadia_defconfig +++ b/configs/acadia_defconfig @@ -1,5 +1,3 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_ACADIA=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/adp-ag101_defconfig b/configs/adp-ag101_defconfig index 39a0510..e550f71 100644 --- a/configs/adp-ag101_defconfig +++ b/configs/adp-ag101_defconfig @@ -1,3 +1,3 @@ CONFIG_NDS32=y CONFIG_TARGET_ADP_AG101=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/adp-ag101p_defconfig b/configs/adp-ag101p_defconfig index 7ef93b3..740cb57 100644 --- a/configs/adp-ag101p_defconfig +++ b/configs/adp-ag101p_defconfig @@ -1,3 +1,3 @@ CONFIG_NDS32=y CONFIG_TARGET_ADP_AG101P=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/adp-ag102_defconfig b/configs/adp-ag102_defconfig index 217016b..721f61d 100644 --- a/configs/adp-ag102_defconfig +++ b/configs/adp-ag102_defconfig @@ -1,3 +1,5 @@ CONFIG_NDS32=y CONFIG_TARGET_ADP_AG102=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/alpr_defconfig b/configs/alpr_defconfig index 6865410..b7cd74d 100644 --- a/configs/alpr_defconfig +++ b/configs/alpr_defconfig @@ -1,4 +1,7 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_ALPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/alt_defconfig b/configs/alt_defconfig index 66ba1d6..f4fea7f 100644 --- a/configs/alt_defconfig +++ b/configs/alt_defconfig @@ -1,6 +1,20 @@ CONFIG_ARM=y CONFIG_RMOBILE=y CONFIG_TARGET_ALT=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set CONFIG_SPI_FLASH=y CONFIG_SH_SDHI=y diff --git a/configs/am335x_baltos_defconfig b/configs/am335x_baltos_defconfig index d5531f8..bf73919 100644 --- a/configs/am335x_baltos_defconfig +++ b/configs/am335x_baltos_defconfig @@ -5,3 +5,7 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_CONS_INDEX=1 +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set diff --git a/configs/am335x_boneblack_defconfig b/configs/am335x_boneblack_defconfig index b9a0a59..60339c8 100644 --- a/configs/am335x_boneblack_defconfig +++ b/configs/am335x_boneblack_defconfig @@ -4,5 +4,7 @@ CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/am335x_boneblack_vboot_defconfig b/configs/am335x_boneblack_vboot_defconfig index bcdeb44..b141255 100644 --- a/configs/am335x_boneblack_vboot_defconfig +++ b/configs/am335x_boneblack_vboot_defconfig @@ -8,7 +8,9 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT,ENABLE_VBOOT" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_SPI_FLASH=y diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig index 23fed39..96599c6 100644 --- a/configs/am335x_evm_defconfig +++ b/configs/am335x_evm_defconfig @@ -4,5 +4,7 @@ CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_SYS_EXTRA_OPTIONS="NAND" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/am335x_evm_nor_defconfig b/configs/am335x_evm_nor_defconfig index 3500f90..6a39041 100644 --- a/configs/am335x_evm_nor_defconfig +++ b/configs/am335x_evm_nor_defconfig @@ -5,5 +5,6 @@ CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_SYS_EXTRA_OPTIONS="NAND" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/am335x_evm_norboot_defconfig b/configs/am335x_evm_norboot_defconfig index 6a2ad82..9fdffca 100644 --- a/configs/am335x_evm_norboot_defconfig +++ b/configs/am335x_evm_norboot_defconfig @@ -2,5 +2,6 @@ CONFIG_ARM=y CONFIG_TARGET_AM335X_EVM=y CONFIG_NOR=y CONFIG_NOR_BOOT=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/am335x_evm_spiboot_defconfig b/configs/am335x_evm_spiboot_defconfig index d53c878..bbeb3c9 100644 --- a/configs/am335x_evm_spiboot_defconfig +++ b/configs/am335x_evm_spiboot_defconfig @@ -4,5 +4,7 @@ CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_SYS_EXTRA_OPTIONS="SPI_BOOT" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/am335x_evm_usbspl_defconfig b/configs/am335x_evm_usbspl_defconfig index 50da93c..c6109f1 100644 --- a/configs/am335x_evm_usbspl_defconfig +++ b/configs/am335x_evm_usbspl_defconfig @@ -4,5 +4,7 @@ CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_SYS_EXTRA_OPTIONS="NAND,SPL_USBETH_SUPPORT" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/am335x_igep0033_defconfig b/configs/am335x_igep0033_defconfig index 3d8d285..a31982a 100644 --- a/configs/am335x_igep0033_defconfig +++ b/configs/am335x_igep0033_defconfig @@ -3,4 +3,6 @@ CONFIG_TARGET_AM335X_IGEP0033=y CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_ADDR=0x82000000 -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/am3517_crane_defconfig b/configs/am3517_crane_defconfig index abdd345..a44ffe7 100644 --- a/configs/am3517_crane_defconfig +++ b/configs/am3517_crane_defconfig @@ -2,3 +2,10 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_AM3517_CRANE=y CONFIG_SPL=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig index 3b71cc6..4589b30 100644 --- a/configs/am3517_evm_defconfig +++ b/configs/am3517_evm_defconfig @@ -2,4 +2,8 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_AM3517_EVM=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/am43xx_evm_defconfig b/configs/am43xx_evm_defconfig index 6acbe88..407d67c 100644 --- a/configs/am43xx_evm_defconfig +++ b/configs/am43xx_evm_defconfig @@ -2,5 +2,7 @@ CONFIG_ARM=y CONFIG_TARGET_AM43XX_EVM=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/am43xx_evm_ethboot_defconfig b/configs/am43xx_evm_ethboot_defconfig index 51845a5..2d1a301 100644 --- a/configs/am43xx_evm_ethboot_defconfig +++ b/configs/am43xx_evm_ethboot_defconfig @@ -2,5 +2,7 @@ CONFIG_ARM=y CONFIG_TARGET_AM43XX_EVM=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_ETH_SUPPORT" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/am43xx_evm_qspiboot_defconfig b/configs/am43xx_evm_qspiboot_defconfig index 7ee15c0..ff0109f 100644 --- a/configs/am43xx_evm_qspiboot_defconfig +++ b/configs/am43xx_evm_qspiboot_defconfig @@ -1,5 +1,7 @@ CONFIG_ARM=y CONFIG_TARGET_AM43XX_EVM=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,QSPI,QSPI_BOOT" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/am43xx_evm_usbhost_boot_defconfig b/configs/am43xx_evm_usbhost_boot_defconfig index 1bc1009..2a6c3dc 100644 --- a/configs/am43xx_evm_usbhost_boot_defconfig +++ b/configs/am43xx_evm_usbhost_boot_defconfig @@ -2,5 +2,7 @@ CONFIG_ARM=y CONFIG_TARGET_AM43XX_EVM=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_USB_HOST_SUPPORT" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/amcore_defconfig b/configs/amcore_defconfig index 705c400..47c4f3d 100644 --- a/configs/amcore_defconfig +++ b/configs/amcore_defconfig @@ -1,2 +1,8 @@ CONFIG_M68K=y CONFIG_TARGET_AMCORE=y +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/ap325rxa_defconfig b/configs/ap325rxa_defconfig index ef5964a..8c22020 100644 --- a/configs/ap325rxa_defconfig +++ b/configs/ap325rxa_defconfig @@ -1,4 +1,18 @@ CONFIG_SH=y CONFIG_TARGET_AP325RXA=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/ap_sh4a_4a_defconfig b/configs/ap_sh4a_4a_defconfig index 1c6a0cc..51d5f9e 100644 --- a/configs/ap_sh4a_4a_defconfig +++ b/configs/ap_sh4a_4a_defconfig @@ -1,4 +1,20 @@ CONFIG_SH=y CONFIG_TARGET_AP_SH4A_4A=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/apalis_t30_defconfig b/configs/apalis_t30_defconfig index 04b03c4..fa9f365 100644 --- a/configs/apalis_t30_defconfig +++ b/configs/apalis_t30_defconfig @@ -3,8 +3,11 @@ CONFIG_TEGRA=y CONFIG_TEGRA30=y CONFIG_TARGET_APALIS_T30=y CONFIG_DEFAULT_DEVICE_TREE="tegra30-apalis" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_NFS is not set CONFIG_SPL_DM=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/apf27_defconfig b/configs/apf27_defconfig index 231ef6d..854a2b7 100644 --- a/configs/apf27_defconfig +++ b/configs/apf27_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y CONFIG_TARGET_APF27=y CONFIG_SPL=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set diff --git a/configs/apx4devkit_defconfig b/configs/apx4devkit_defconfig index e88794a..5727929 100644 --- a/configs/apx4devkit_defconfig +++ b/configs/apx4devkit_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_APX4DEVKIT=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/arcangel4-be_defconfig b/configs/arcangel4-be_defconfig index 7f0402c..7335aac 100644 --- a/configs/arcangel4-be_defconfig +++ b/configs/arcangel4-be_defconfig @@ -4,7 +4,9 @@ CONFIG_TARGET_ARCANGEL4=y CONFIG_SYS_CLK_FREQ=70000000 CONFIG_SYS_TEXT_BASE=0x81000000 CONFIG_DEFAULT_DEVICE_TREE="arcangel4" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_DM=y diff --git a/configs/arcangel4_defconfig b/configs/arcangel4_defconfig index b3df518..5683b81 100644 --- a/configs/arcangel4_defconfig +++ b/configs/arcangel4_defconfig @@ -3,7 +3,9 @@ CONFIG_TARGET_ARCANGEL4=y CONFIG_SYS_CLK_FREQ=70000000 CONFIG_SYS_TEXT_BASE=0x81000000 CONFIG_DEFAULT_DEVICE_TREE="arcangel4" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_DM=y diff --git a/configs/arches_defconfig b/configs/arches_defconfig index c55357b..f979a64 100644 --- a/configs/arches_defconfig +++ b/configs/arches_defconfig @@ -3,7 +3,5 @@ CONFIG_4xx=y CONFIG_TARGET_CANYONLANDS=y CONFIG_ARCHES=y CONFIG_DEFAULT_DEVICE_TREE="arches" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_OF_CONTROL=y CONFIG_SPL_DISABLE_OF_CONTROL=y diff --git a/configs/aria_defconfig b/configs/aria_defconfig index 85d673d..1c073bf 100644 --- a/configs/aria_defconfig +++ b/configs/aria_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC512X=y CONFIG_TARGET_ARIA=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/aristainetos2_defconfig b/configs/aristainetos2_defconfig index c3f60a1..e676f0e 100644 --- a/configs/aristainetos2_defconfig +++ b/configs/aristainetos2_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_ARISTAINETOS2=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg,MX6DL" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/aristainetos_defconfig b/configs/aristainetos_defconfig index 12e09ce..f5b0b6b 100644 --- a/configs/aristainetos_defconfig +++ b/configs/aristainetos_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_ARISTAINETOS=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos.cfg,MX6DL" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/armadillo-800eva_defconfig b/configs/armadillo-800eva_defconfig index e859281..240d72d 100644 --- a/configs/armadillo-800eva_defconfig +++ b/configs/armadillo-800eva_defconfig @@ -1,4 +1,20 @@ CONFIG_ARM=y CONFIG_RMOBILE=y CONFIG_TARGET_ARMADILLO_800EVA=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set diff --git a/configs/arndale_defconfig b/configs/arndale_defconfig index 21a2100..aa489cf 100644 --- a/configs/arndale_defconfig +++ b/configs/arndale_defconfig @@ -3,7 +3,8 @@ CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_ARNDALE=y CONFIG_DEFAULT_DEVICE_TREE="exynos5250-arndale" CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_CMD_SOUND=y CONFIG_SOUND=y CONFIG_I2S=y diff --git a/configs/aspenite_defconfig b/configs/aspenite_defconfig index 0b341d6..c606244 100644 --- a/configs/aspenite_defconfig +++ b/configs/aspenite_defconfig @@ -1,2 +1,7 @@ CONFIG_ARM=y CONFIG_TARGET_ASPENITE=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/astro_mcf5373l_defconfig b/configs/astro_mcf5373l_defconfig index 6807aee..f394f4d 100644 --- a/configs/astro_mcf5373l_defconfig +++ b/configs/astro_mcf5373l_defconfig @@ -1,2 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_ASTRO_MCF5373L=y +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/at91rm9200ek_defconfig b/configs/at91rm9200ek_defconfig index 932a48f..74d4f3a 100644 --- a/configs/at91rm9200ek_defconfig +++ b/configs/at91rm9200ek_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91RM9200EK=y -CONFIG_CMD_NET=y +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/at91rm9200ek_ram_defconfig b/configs/at91rm9200ek_ram_defconfig index 44b6fb9..f499453 100644 --- a/configs/at91rm9200ek_ram_defconfig +++ b/configs/at91rm9200ek_ram_defconfig @@ -2,4 +2,5 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91RM9200EK=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT" -CONFIG_CMD_NET=y +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/at91sam9260ek_dataflash_cs0_defconfig b/configs/at91sam9260ek_dataflash_cs0_defconfig index 5f629b6..96c5eee 100644 --- a/configs/at91sam9260ek_dataflash_cs0_defconfig +++ b/configs/at91sam9260ek_dataflash_cs0_defconfig @@ -2,4 +2,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9260EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_DATAFLASH_CS0" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/at91sam9260ek_dataflash_cs1_defconfig b/configs/at91sam9260ek_dataflash_cs1_defconfig index 05a4d2d..6330c3e 100644 --- a/configs/at91sam9260ek_dataflash_cs1_defconfig +++ b/configs/at91sam9260ek_dataflash_cs1_defconfig @@ -2,4 +2,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9260EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_DATAFLASH_CS1" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/at91sam9260ek_nandflash_defconfig b/configs/at91sam9260ek_nandflash_defconfig index 883d363..ae2defd 100644 --- a/configs/at91sam9260ek_nandflash_defconfig +++ b/configs/at91sam9260ek_nandflash_defconfig @@ -2,4 +2,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9260EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_NANDFLASH" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/at91sam9261ek_dataflash_cs0_defconfig b/configs/at91sam9261ek_dataflash_cs0_defconfig index e465319..838b235 100644 --- a/configs/at91sam9261ek_dataflash_cs0_defconfig +++ b/configs/at91sam9261ek_dataflash_cs0_defconfig @@ -2,4 +2,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9261EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261,SYS_USE_DATAFLASH_CS0" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/at91sam9261ek_dataflash_cs3_defconfig b/configs/at91sam9261ek_dataflash_cs3_defconfig index 883fe86..6104479 100644 --- a/configs/at91sam9261ek_dataflash_cs3_defconfig +++ b/configs/at91sam9261ek_dataflash_cs3_defconfig @@ -2,4 +2,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9261EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261,SYS_USE_DATAFLASH_CS3" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/at91sam9261ek_nandflash_defconfig b/configs/at91sam9261ek_nandflash_defconfig index 9c0dc1a..4015c9f 100644 --- a/configs/at91sam9261ek_nandflash_defconfig +++ b/configs/at91sam9261ek_nandflash_defconfig @@ -2,4 +2,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9261EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261,SYS_USE_NANDFLASH" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/at91sam9263ek_dataflash_cs0_defconfig b/configs/at91sam9263ek_dataflash_cs0_defconfig index fac7637..d9003ff 100644 --- a/configs/at91sam9263ek_dataflash_cs0_defconfig +++ b/configs/at91sam9263ek_dataflash_cs0_defconfig @@ -2,4 +2,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9263EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/at91sam9263ek_dataflash_defconfig b/configs/at91sam9263ek_dataflash_defconfig index fac7637..d9003ff 100644 --- a/configs/at91sam9263ek_dataflash_defconfig +++ b/configs/at91sam9263ek_dataflash_defconfig @@ -2,4 +2,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9263EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/at91sam9263ek_nandflash_defconfig b/configs/at91sam9263ek_nandflash_defconfig index 4486957..600c5dd 100644 --- a/configs/at91sam9263ek_nandflash_defconfig +++ b/configs/at91sam9263ek_nandflash_defconfig @@ -2,4 +2,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9263EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_NANDFLASH" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/at91sam9263ek_norflash_boot_defconfig b/configs/at91sam9263ek_norflash_boot_defconfig index 6bc4f40..2e34b79 100644 --- a/configs/at91sam9263ek_norflash_boot_defconfig +++ b/configs/at91sam9263ek_norflash_boot_defconfig @@ -2,4 +2,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9263EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_BOOT_NORFLASH" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/at91sam9263ek_norflash_defconfig b/configs/at91sam9263ek_norflash_defconfig index 1b37f4e..f72ed85 100644 --- a/configs/at91sam9263ek_norflash_defconfig +++ b/configs/at91sam9263ek_norflash_defconfig @@ -2,4 +2,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9263EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_NORFLASH" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/at91sam9g10ek_dataflash_cs0_defconfig b/configs/at91sam9g10ek_dataflash_cs0_defconfig index 3cb93e9..5f8d803 100644 --- a/configs/at91sam9g10ek_dataflash_cs0_defconfig +++ b/configs/at91sam9g10ek_dataflash_cs0_defconfig @@ -2,4 +2,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9261EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G10,SYS_USE_DATAFLASH_CS0" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/at91sam9g10ek_dataflash_cs3_defconfig b/configs/at91sam9g10ek_dataflash_cs3_defconfig index 2c1d9f6..3ed763e 100644 --- a/configs/at91sam9g10ek_dataflash_cs3_defconfig +++ b/configs/at91sam9g10ek_dataflash_cs3_defconfig @@ -2,4 +2,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9261EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G10,SYS_USE_DATAFLASH_CS3" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/at91sam9g10ek_nandflash_defconfig b/configs/at91sam9g10ek_nandflash_defconfig index 06fb78f..c27e39a 100644 --- a/configs/at91sam9g10ek_nandflash_defconfig +++ b/configs/at91sam9g10ek_nandflash_defconfig @@ -2,4 +2,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9261EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G10,SYS_USE_NANDFLASH" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/at91sam9g20ek_2mmc_defconfig b/configs/at91sam9g20ek_2mmc_defconfig index d3197b4..d58de8e 100644 --- a/configs/at91sam9g20ek_2mmc_defconfig +++ b/configs/at91sam9g20ek_2mmc_defconfig @@ -2,4 +2,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9260EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_MMC" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/at91sam9g20ek_2mmc_nandflash_defconfig b/configs/at91sam9g20ek_2mmc_nandflash_defconfig index 8d08dc1..4b28839 100644 --- a/configs/at91sam9g20ek_2mmc_nandflash_defconfig +++ b/configs/at91sam9g20ek_2mmc_nandflash_defconfig @@ -2,4 +2,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9260EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_NANDFLASH" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/at91sam9g20ek_dataflash_cs0_defconfig b/configs/at91sam9g20ek_dataflash_cs0_defconfig index 62b8ed3..ee86dad 100644 --- a/configs/at91sam9g20ek_dataflash_cs0_defconfig +++ b/configs/at91sam9g20ek_dataflash_cs0_defconfig @@ -2,4 +2,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9260EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_DATAFLASH_CS0" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/at91sam9g20ek_dataflash_cs1_defconfig b/configs/at91sam9g20ek_dataflash_cs1_defconfig index dba8f77..39d4b09 100644 --- a/configs/at91sam9g20ek_dataflash_cs1_defconfig +++ b/configs/at91sam9g20ek_dataflash_cs1_defconfig @@ -2,4 +2,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9260EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_DATAFLASH_CS1" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/at91sam9g20ek_nandflash_defconfig b/configs/at91sam9g20ek_nandflash_defconfig index e1b99d3..d636485 100644 --- a/configs/at91sam9g20ek_nandflash_defconfig +++ b/configs/at91sam9g20ek_nandflash_defconfig @@ -2,4 +2,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9260EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_NANDFLASH" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/at91sam9m10g45ek_mmc_defconfig b/configs/at91sam9m10g45ek_mmc_defconfig index a9ab01a..1472d20 100644 --- a/configs/at91sam9m10g45ek_mmc_defconfig +++ b/configs/at91sam9m10g45ek_mmc_defconfig @@ -3,4 +3,10 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9M10G45EK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_MMC" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/at91sam9m10g45ek_nandflash_defconfig b/configs/at91sam9m10g45ek_nandflash_defconfig index b57f2ca..526419c 100644 --- a/configs/at91sam9m10g45ek_nandflash_defconfig +++ b/configs/at91sam9m10g45ek_nandflash_defconfig @@ -3,4 +3,10 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9M10G45EK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_NANDFLASH" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/at91sam9n12ek_mmc_defconfig b/configs/at91sam9n12ek_mmc_defconfig index d35eec5..c549baf 100644 --- a/configs/at91sam9n12ek_mmc_defconfig +++ b/configs/at91sam9n12ek_mmc_defconfig @@ -2,5 +2,8 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9N12EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_MMC" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/at91sam9n12ek_nandflash_defconfig b/configs/at91sam9n12ek_nandflash_defconfig index b030f91..756db2a 100644 --- a/configs/at91sam9n12ek_nandflash_defconfig +++ b/configs/at91sam9n12ek_nandflash_defconfig @@ -3,5 +3,8 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9N12EK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_NANDFLASH" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/at91sam9n12ek_spiflash_defconfig b/configs/at91sam9n12ek_spiflash_defconfig index b523e8b..0430de9 100644 --- a/configs/at91sam9n12ek_spiflash_defconfig +++ b/configs/at91sam9n12ek_spiflash_defconfig @@ -3,5 +3,8 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9N12EK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_SPIFLASH" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/at91sam9rlek_dataflash_defconfig b/configs/at91sam9rlek_dataflash_defconfig index 967d28a..c555caa 100644 --- a/configs/at91sam9rlek_dataflash_defconfig +++ b/configs/at91sam9rlek_dataflash_defconfig @@ -3,3 +3,12 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9RLEK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9RL,SYS_USE_DATAFLASH" CONFIG_HUSH_PARSER=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/at91sam9rlek_mmc_defconfig b/configs/at91sam9rlek_mmc_defconfig index 95a71df..5cb5655 100644 --- a/configs/at91sam9rlek_mmc_defconfig +++ b/configs/at91sam9rlek_mmc_defconfig @@ -3,3 +3,12 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9RLEK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9RL,SYS_USE_MMC" CONFIG_HUSH_PARSER=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/at91sam9rlek_nandflash_defconfig b/configs/at91sam9rlek_nandflash_defconfig index 885214d..3e3528e 100644 --- a/configs/at91sam9rlek_nandflash_defconfig +++ b/configs/at91sam9rlek_nandflash_defconfig @@ -3,3 +3,12 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9RLEK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9RL,SYS_USE_NANDFLASH" CONFIG_HUSH_PARSER=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/at91sam9x5ek_dataflash_defconfig b/configs/at91sam9x5ek_dataflash_defconfig index b3dff9c..c757fc4 100644 --- a/configs/at91sam9x5ek_dataflash_defconfig +++ b/configs/at91sam9x5ek_dataflash_defconfig @@ -2,5 +2,9 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9X5EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_DATAFLASH" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/at91sam9x5ek_mmc_defconfig b/configs/at91sam9x5ek_mmc_defconfig index 8a27e0c..82e67f3 100644 --- a/configs/at91sam9x5ek_mmc_defconfig +++ b/configs/at91sam9x5ek_mmc_defconfig @@ -2,5 +2,9 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9X5EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_MMC" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/at91sam9x5ek_nandflash_defconfig b/configs/at91sam9x5ek_nandflash_defconfig index d0bdb27..b45d8d0 100644 --- a/configs/at91sam9x5ek_nandflash_defconfig +++ b/configs/at91sam9x5ek_nandflash_defconfig @@ -3,5 +3,9 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9X5EK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_NANDFLASH" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/at91sam9x5ek_spiflash_defconfig b/configs/at91sam9x5ek_spiflash_defconfig index 33778a5..f33a2fd 100644 --- a/configs/at91sam9x5ek_spiflash_defconfig +++ b/configs/at91sam9x5ek_spiflash_defconfig @@ -3,5 +3,9 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9X5EK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_SPIFLASH" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/at91sam9xeek_dataflash_cs0_defconfig b/configs/at91sam9xeek_dataflash_cs0_defconfig index 9577c0f..585d564 100644 --- a/configs/at91sam9xeek_dataflash_cs0_defconfig +++ b/configs/at91sam9xeek_dataflash_cs0_defconfig @@ -2,4 +2,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9260EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE,SYS_USE_DATAFLASH_CS0" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/at91sam9xeek_dataflash_cs1_defconfig b/configs/at91sam9xeek_dataflash_cs1_defconfig index d72737b..1c38777 100644 --- a/configs/at91sam9xeek_dataflash_cs1_defconfig +++ b/configs/at91sam9xeek_dataflash_cs1_defconfig @@ -2,4 +2,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9260EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE,SYS_USE_DATAFLASH_CS1" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/at91sam9xeek_nandflash_defconfig b/configs/at91sam9xeek_nandflash_defconfig index ac88c96..5e9a080 100644 --- a/configs/at91sam9xeek_nandflash_defconfig +++ b/configs/at91sam9xeek_nandflash_defconfig @@ -2,4 +2,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_AT91SAM9260EK=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE,SYS_USE_NANDFLASH" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/atngw100_defconfig b/configs/atngw100_defconfig index b1bf01f..0f5be56 100644 --- a/configs/atngw100_defconfig +++ b/configs/atngw100_defconfig @@ -4,5 +4,8 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_NET=y +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/atngw100mkii_defconfig b/configs/atngw100mkii_defconfig index b4014df..b4d8d1c 100644 --- a/configs/atngw100mkii_defconfig +++ b/configs/atngw100mkii_defconfig @@ -4,5 +4,7 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_NET=y +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/atstk1002_defconfig b/configs/atstk1002_defconfig index 6f25f3b..bb0406e 100644 --- a/configs/atstk1002_defconfig +++ b/configs/atstk1002_defconfig @@ -4,4 +4,7 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_NET=y +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/axm_defconfig b/configs/axm_defconfig index fdd26df..78fcb76 100644 --- a/configs/axm_defconfig +++ b/configs/axm_defconfig @@ -3,5 +3,11 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_TAURUS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2068,BOARD_AXM" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/axs101_defconfig b/configs/axs101_defconfig index 008df4b..04aec0b 100644 --- a/configs/axs101_defconfig +++ b/configs/axs101_defconfig @@ -4,7 +4,9 @@ CONFIG_ARC_CACHE_LINE_SHIFT=5 CONFIG_TARGET_AXS101=y CONFIG_SYS_CLK_FREQ=750000000 CONFIG_SYS_TEXT_BASE=0x81000000 -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/axs103_defconfig b/configs/axs103_defconfig index 3b424e2..8315b61 100644 --- a/configs/axs103_defconfig +++ b/configs/axs103_defconfig @@ -3,7 +3,9 @@ CONFIG_ISA_ARCV2=y CONFIG_TARGET_AXS101=y CONFIG_SYS_CLK_FREQ=50000000 CONFIG_SYS_TEXT_BASE=0x81000000 -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig index 198c6f8..c84e82e 100644 --- a/configs/ba10_tv_box_defconfig +++ b/configs/ba10_tv_box_defconfig @@ -8,10 +8,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-ba10-tvbox" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/balloon3_defconfig b/configs/balloon3_defconfig index a1f4adb..bf524ce 100644 --- a/configs/balloon3_defconfig +++ b/configs/balloon3_defconfig @@ -1,2 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_BALLOON3=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/bamboo_defconfig b/configs/bamboo_defconfig index 420803c..1d66807 100644 --- a/configs/bamboo_defconfig +++ b/configs/bamboo_defconfig @@ -1,5 +1,3 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_BAMBOO=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/bcm11130_defconfig b/configs/bcm11130_defconfig index ff2144f..e7a9aa6 100644 --- a/configs/bcm11130_defconfig +++ b/configs/bcm11130_defconfig @@ -1,3 +1,8 @@ CONFIG_ARM=y CONFIG_TARGET_BCM28155_AP=y CONFIG_SYS_EXTRA_OPTIONS="SYS_MMC_ENV_DEV=0" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/bcm11130_nand_defconfig b/configs/bcm11130_nand_defconfig index a21e623..f50ffea 100644 --- a/configs/bcm11130_nand_defconfig +++ b/configs/bcm11130_nand_defconfig @@ -1,3 +1,8 @@ CONFIG_ARM=y CONFIG_TARGET_BCM28155_AP=y CONFIG_SYS_EXTRA_OPTIONS="NAND" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/bcm28155_ap_defconfig b/configs/bcm28155_ap_defconfig index 0a1c592..c82383e 100644 --- a/configs/bcm28155_ap_defconfig +++ b/configs/bcm28155_ap_defconfig @@ -1,2 +1,7 @@ CONFIG_ARM=y CONFIG_TARGET_BCM28155_AP=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/bcm28155_w1d_defconfig b/configs/bcm28155_w1d_defconfig index 3ab05f6..bc0d8d2 100644 --- a/configs/bcm28155_w1d_defconfig +++ b/configs/bcm28155_w1d_defconfig @@ -1,3 +1,8 @@ CONFIG_ARM=y CONFIG_TARGET_BCM28155_AP=y CONFIG_SYS_EXTRA_OPTIONS="BCM_SF2_ETH,BCM_SF2_ETH_GMAC" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/bcm911360_entphn-ns_defconfig b/configs/bcm911360_entphn-ns_defconfig index 1e23da3..4a7e1bc 100644 --- a/configs/bcm911360_entphn-ns_defconfig +++ b/configs/bcm911360_entphn-ns_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_BCMCYGNUS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x20000000,ARMV7_NONSEC" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/bcm911360_entphn_defconfig b/configs/bcm911360_entphn_defconfig index 86d233f..a0d291c 100644 --- a/configs/bcm911360_entphn_defconfig +++ b/configs/bcm911360_entphn_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_BCMCYGNUS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x20000000" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/bcm911360k_defconfig b/configs/bcm911360k_defconfig index a7feb86..df88a57 100644 --- a/configs/bcm911360k_defconfig +++ b/configs/bcm911360k_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_BCMCYGNUS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x40000000" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/bcm958300k-ns_defconfig b/configs/bcm958300k-ns_defconfig index 52551ad..d9105a6 100644 --- a/configs/bcm958300k-ns_defconfig +++ b/configs/bcm958300k-ns_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_BCMCYGNUS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x40000000,ARMV7_NONSEC" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/bcm958300k_defconfig b/configs/bcm958300k_defconfig index a7feb86..df88a57 100644 --- a/configs/bcm958300k_defconfig +++ b/configs/bcm958300k_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_BCMCYGNUS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x40000000" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/bcm958305k_defconfig b/configs/bcm958305k_defconfig index a7feb86..df88a57 100644 --- a/configs/bcm958305k_defconfig +++ b/configs/bcm958305k_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_BCMCYGNUS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x40000000" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/bcm958622hr_defconfig b/configs/bcm958622hr_defconfig index 844a151..2272462 100644 --- a/configs/bcm958622hr_defconfig +++ b/configs/bcm958622hr_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_BCMNSP=y CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x01000000" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/bct-brettl2_defconfig b/configs/bct-brettl2_defconfig index b585aa7..9e6f1ee 100644 --- a/configs/bct-brettl2_defconfig +++ b/configs/bct-brettl2_defconfig @@ -1,5 +1,5 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BCT_BRETTL2=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/beagle_x15_defconfig b/configs/beagle_x15_defconfig index bf224fc..3b3c027 100644 --- a/configs/beagle_x15_defconfig +++ b/configs/beagle_x15_defconfig @@ -3,4 +3,6 @@ CONFIG_OMAP54XX=y CONFIG_TARGET_BEAGLE_X15=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=3" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/beaver_defconfig b/configs/beaver_defconfig index 6b01fe0..ad74b85 100644 --- a/configs/beaver_defconfig +++ b/configs/beaver_defconfig @@ -3,7 +3,12 @@ CONFIG_TEGRA=y CONFIG_TEGRA30=y CONFIG_TARGET_BEAVER=y CONFIG_DEFAULT_DEVICE_TREE="tegra30-beaver" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_SPL_DM=y CONFIG_SPI_FLASH=y CONFIG_USB=y diff --git a/configs/bf506f-ezkit_defconfig b/configs/bf506f-ezkit_defconfig index f164e06..0decb53 100644 --- a/configs/bf506f-ezkit_defconfig +++ b/configs/bf506f-ezkit_defconfig @@ -1,5 +1,26 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF506F_EZKIT=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set # CONFIG_CMD_BOOTM is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set diff --git a/configs/bf518f-ezbrd_defconfig b/configs/bf518f-ezbrd_defconfig index dd8a647..c316914 100644 --- a/configs/bf518f-ezbrd_defconfig +++ b/configs/bf518f-ezbrd_defconfig @@ -1,6 +1,6 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF518F_EZBRD=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf525-ucr2_defconfig b/configs/bf525-ucr2_defconfig index f1352e2..6406f20 100644 --- a/configs/bf525-ucr2_defconfig +++ b/configs/bf525-ucr2_defconfig @@ -1,3 +1,8 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF525_UCR2=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set CONFIG_SPI_FLASH=y diff --git a/configs/bf526-ezbrd_defconfig b/configs/bf526-ezbrd_defconfig index e5132d5..c8dab57 100644 --- a/configs/bf526-ezbrd_defconfig +++ b/configs/bf526-ezbrd_defconfig @@ -1,6 +1,6 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF526_EZBRD=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf527-ad7160-eval_defconfig b/configs/bf527-ad7160-eval_defconfig index 16e6415..b03a2ac 100644 --- a/configs/bf527-ad7160-eval_defconfig +++ b/configs/bf527-ad7160-eval_defconfig @@ -1,4 +1,8 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF527_AD7160_EVAL=y +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf527-ezkit-v2_defconfig b/configs/bf527-ezkit-v2_defconfig index 5da5cd3..74f352e 100644 --- a/configs/bf527-ezkit-v2_defconfig +++ b/configs/bf527-ezkit-v2_defconfig @@ -1,7 +1,7 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF527_EZKIT=y CONFIG_SYS_EXTRA_OPTIONS="BF527_EZKIT_REV_2_1" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y CONFIG_LIB_RAND=y diff --git a/configs/bf527-ezkit_defconfig b/configs/bf527-ezkit_defconfig index 5d3cb55..2e75225 100644 --- a/configs/bf527-ezkit_defconfig +++ b/configs/bf527-ezkit_defconfig @@ -1,6 +1,6 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF527_EZKIT=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf527-sdp_defconfig b/configs/bf527-sdp_defconfig index 261109e..cb43de1 100644 --- a/configs/bf527-sdp_defconfig +++ b/configs/bf527-sdp_defconfig @@ -1,4 +1,8 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF527_SDP=y +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf533-ezkit_defconfig b/configs/bf533-ezkit_defconfig index 04210d8..54a09aa 100644 --- a/configs/bf533-ezkit_defconfig +++ b/configs/bf533-ezkit_defconfig @@ -1,5 +1,5 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF533_EZKIT=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y CONFIG_LIB_RAND=y diff --git a/configs/bf533-stamp_defconfig b/configs/bf533-stamp_defconfig index 191e2d6..154dc26 100644 --- a/configs/bf533-stamp_defconfig +++ b/configs/bf533-stamp_defconfig @@ -1,5 +1,5 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF533_STAMP=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y CONFIG_LIB_RAND=y diff --git a/configs/bf537-minotaur_defconfig b/configs/bf537-minotaur_defconfig index 83f31d8..57e9a24 100644 --- a/configs/bf537-minotaur_defconfig +++ b/configs/bf537-minotaur_defconfig @@ -1,5 +1,7 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF537_MINOTAUR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPI_FLASH=y diff --git a/configs/bf537-pnav_defconfig b/configs/bf537-pnav_defconfig index 7b02a21..3fa1758 100644 --- a/configs/bf537-pnav_defconfig +++ b/configs/bf537-pnav_defconfig @@ -1,5 +1,5 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF537_PNAV=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPI_FLASH=y diff --git a/configs/bf537-srv1_defconfig b/configs/bf537-srv1_defconfig index cd8cc3e..51022d8 100644 --- a/configs/bf537-srv1_defconfig +++ b/configs/bf537-srv1_defconfig @@ -1,5 +1,7 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF537_SRV1=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPI_FLASH=y diff --git a/configs/bf537-stamp_defconfig b/configs/bf537-stamp_defconfig index 9768bd6..294d0d9 100644 --- a/configs/bf537-stamp_defconfig +++ b/configs/bf537-stamp_defconfig @@ -1,6 +1,6 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF537_STAMP=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf538f-ezkit_defconfig b/configs/bf538f-ezkit_defconfig index f8ae21b..6cb6c6b 100644 --- a/configs/bf538f-ezkit_defconfig +++ b/configs/bf538f-ezkit_defconfig @@ -1,5 +1,5 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF538F_EZKIT=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y CONFIG_LIB_RAND=y diff --git a/configs/bf548-ezkit_defconfig b/configs/bf548-ezkit_defconfig index c09b4a0..1ded34d 100644 --- a/configs/bf548-ezkit_defconfig +++ b/configs/bf548-ezkit_defconfig @@ -1,6 +1,6 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF548_EZKIT=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y CONFIG_LIB_RAND=y diff --git a/configs/bf561-acvilon_defconfig b/configs/bf561-acvilon_defconfig index ff42a8b..897e44f 100644 --- a/configs/bf561-acvilon_defconfig +++ b/configs/bf561-acvilon_defconfig @@ -1,6 +1,8 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF561_ACVILON=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y CONFIG_LIB_RAND=y diff --git a/configs/bf561-ezkit_defconfig b/configs/bf561-ezkit_defconfig index e8a1ea4..fa4b611 100644 --- a/configs/bf561-ezkit_defconfig +++ b/configs/bf561-ezkit_defconfig @@ -1,5 +1,5 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF561_EZKIT=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y CONFIG_LIB_RAND=y diff --git a/configs/bf609-ezkit_defconfig b/configs/bf609-ezkit_defconfig index c7ceb55..bb5efa9 100644 --- a/configs/bf609-ezkit_defconfig +++ b/configs/bf609-ezkit_defconfig @@ -1,6 +1,6 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF609_EZKIT=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/bg0900_defconfig b/configs/bg0900_defconfig index ec4d8c0..8e0fac8 100644 --- a/configs/bg0900_defconfig +++ b/configs/bg0900_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_BG0900=y CONFIG_SPL=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/birdland_bav335a_defconfig b/configs/birdland_bav335a_defconfig index a81f843..244c770 100644 --- a/configs/birdland_bav335a_defconfig +++ b/configs/birdland_bav335a_defconfig @@ -3,5 +3,7 @@ CONFIG_TARGET_BAV335X=y CONFIG_BAV_VERSION=1 CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/birdland_bav335b_defconfig b/configs/birdland_bav335b_defconfig index 9198955..a86b203 100644 --- a/configs/birdland_bav335b_defconfig +++ b/configs/birdland_bav335b_defconfig @@ -3,5 +3,7 @@ CONFIG_TARGET_BAV335X=y CONFIG_BAV_VERSION=2 CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/blackstamp_defconfig b/configs/blackstamp_defconfig index 30e438f..762eef3 100644 --- a/configs/blackstamp_defconfig +++ b/configs/blackstamp_defconfig @@ -1,4 +1,6 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BLACKSTAMP=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/blackvme_defconfig b/configs/blackvme_defconfig index 272ecd7..53f4a0d 100644 --- a/configs/blackvme_defconfig +++ b/configs/blackvme_defconfig @@ -1,4 +1,6 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BLACKVME=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/br4_defconfig b/configs/br4_defconfig index 573a62e..b129899 100644 --- a/configs/br4_defconfig +++ b/configs/br4_defconfig @@ -1,6 +1,8 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BR4=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y CONFIG_LIB_RAND=y diff --git a/configs/bubinga_defconfig b/configs/bubinga_defconfig index 3b15eaa..65ea4d1 100644 --- a/configs/bubinga_defconfig +++ b/configs/bubinga_defconfig @@ -1,5 +1,3 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_BUBINGA=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/caddy2_defconfig b/configs/caddy2_defconfig index ccc27c2..35efa7f 100644 --- a/configs/caddy2_defconfig +++ b/configs/caddy2_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_VME8349=y CONFIG_SYS_EXTRA_OPTIONS="CADDY2" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/cairo_defconfig b/configs/cairo_defconfig index d2d47ae..b837de3 100644 --- a/configs/cairo_defconfig +++ b/configs/cairo_defconfig @@ -2,4 +2,8 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_CAIRO=y CONFIG_SPL=y -CONFIG_CMD_SETEXPR=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_NET is not set diff --git a/configs/calimain_defconfig b/configs/calimain_defconfig index e1b6490..35f73e3 100644 --- a/configs/calimain_defconfig +++ b/configs/calimain_defconfig @@ -3,4 +3,4 @@ CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_CALIMAIN=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR="\x0b" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/cam5200_defconfig b/configs/cam5200_defconfig index e1796e3..eda131a 100644 --- a/configs/cam5200_defconfig +++ b/configs/cam5200_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_TQM5200=y CONFIG_SYS_EXTRA_OPTIONS="CAM5200,TQM5200S,TQM5200_B" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/cam5200_niosflash_defconfig b/configs/cam5200_niosflash_defconfig index c382486..aa7c70a 100644 --- a/configs/cam5200_niosflash_defconfig +++ b/configs/cam5200_niosflash_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_TQM5200=y CONFIG_SYS_EXTRA_OPTIONS="CAM5200,TQM5200S,TQM5200_B,CAM5200_NIOSFLASH" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/cam_enc_4xx_defconfig b/configs/cam_enc_4xx_defconfig index a7fe71d..f7f6f12 100644 --- a/configs/cam_enc_4xx_defconfig +++ b/configs/cam_enc_4xx_defconfig @@ -2,5 +2,8 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_CAM_ENC_4XX=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/canmb_defconfig b/configs/canmb_defconfig index c005299..b1ec147 100644 --- a/configs/canmb_defconfig +++ b/configs/canmb_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_CANMB=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/canyonlands_defconfig b/configs/canyonlands_defconfig index e838a6c..09172b1 100644 --- a/configs/canyonlands_defconfig +++ b/configs/canyonlands_defconfig @@ -3,8 +3,6 @@ CONFIG_4xx=y CONFIG_TARGET_CANYONLANDS=y CONFIG_CANYONLANDS=y CONFIG_DEFAULT_DEVICE_TREE="canyonlands" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_OF_CONTROL=y CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_OF_EMBED=y diff --git a/configs/cardhu_defconfig b/configs/cardhu_defconfig index 37c0a6a..c0e98a5 100644 --- a/configs/cardhu_defconfig +++ b/configs/cardhu_defconfig @@ -3,7 +3,12 @@ CONFIG_TEGRA=y CONFIG_TEGRA30=y CONFIG_TARGET_CARDHU=y CONFIG_DEFAULT_DEVICE_TREE="tegra30-cardhu" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_SPL_DM=y CONFIG_SPI_FLASH=y CONFIG_USB=y diff --git a/configs/cgtqmx6qeval_defconfig b/configs/cgtqmx6qeval_defconfig index 58b98b7..e1eb871 100644 --- a/configs/cgtqmx6qeval_defconfig +++ b/configs/cgtqmx6qeval_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_CGTQMX6EVAL=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/congatec/cgtqmx6eval/imximage.cfg,MX6Q" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/charon_defconfig b/configs/charon_defconfig index 250e949..d67cc55 100644 --- a/configs/charon_defconfig +++ b/configs/charon_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_CHARON=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/chromebook_link_defconfig b/configs/chromebook_link_defconfig index da1d489..018fe91 100644 --- a/configs/chromebook_link_defconfig +++ b/configs/chromebook_link_defconfig @@ -3,7 +3,10 @@ CONFIG_VENDOR_GOOGLE=y CONFIG_DEFAULT_DEVICE_TREE="chromebook_link" CONFIG_TARGET_CHROMEBOOK_LINK=y CONFIG_HAVE_MRC=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y CONFIG_CMD_BOOTSTAGE=y diff --git a/configs/chromebox_panther_defconfig b/configs/chromebox_panther_defconfig index 876e7d8..2ac23ed 100644 --- a/configs/chromebox_panther_defconfig +++ b/configs/chromebox_panther_defconfig @@ -3,7 +3,10 @@ CONFIG_VENDOR_GOOGLE=y CONFIG_DEFAULT_DEVICE_TREE="chromebox_panther" CONFIG_TARGET_CHROMEBOX_PANTHER=y CONFIG_HAVE_MRC=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y CONFIG_CMD_BOOTSTAGE=y diff --git a/configs/cm-bf527_defconfig b/configs/cm-bf527_defconfig index 1394c5a..88d7f08 100644 --- a/configs/cm-bf527_defconfig +++ b/configs/cm-bf527_defconfig @@ -1,5 +1,5 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_CM_BF527=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/cm-bf533_defconfig b/configs/cm-bf533_defconfig index 89a5c0f..753ffe1 100644 --- a/configs/cm-bf533_defconfig +++ b/configs/cm-bf533_defconfig @@ -1,5 +1,5 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_CM_BF533=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y CONFIG_LIB_RAND=y diff --git a/configs/cm-bf537e_defconfig b/configs/cm-bf537e_defconfig index 0264d2f..137f19a 100644 --- a/configs/cm-bf537e_defconfig +++ b/configs/cm-bf537e_defconfig @@ -1,5 +1,5 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_CM_BF537E=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/cm-bf537u_defconfig b/configs/cm-bf537u_defconfig index 90f5066..143b583 100644 --- a/configs/cm-bf537u_defconfig +++ b/configs/cm-bf537u_defconfig @@ -1,5 +1,5 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_CM_BF537U=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/cm-bf548_defconfig b/configs/cm-bf548_defconfig index b9b6044..949612d 100644 --- a/configs/cm-bf548_defconfig +++ b/configs/cm-bf548_defconfig @@ -1,5 +1,5 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_CM_BF548=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y CONFIG_LIB_RAND=y diff --git a/configs/cm-bf561_defconfig b/configs/cm-bf561_defconfig index a304e57..68d4bb9 100644 --- a/configs/cm-bf561_defconfig +++ b/configs/cm-bf561_defconfig @@ -1,5 +1,5 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_CM_BF561=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y CONFIG_LIB_RAND=y diff --git a/configs/cm5200_defconfig b/configs/cm5200_defconfig index 5a44476..76c7b06 100644 --- a/configs/cm5200_defconfig +++ b/configs/cm5200_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_CM5200=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig index d0e8e04..6be5c17 100644 --- a/configs/cm_fx6_defconfig +++ b/configs/cm_fx6_defconfig @@ -2,5 +2,11 @@ CONFIG_ARM=y CONFIG_TARGET_CM_FX6=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL,SPL" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/cm_t335_defconfig b/configs/cm_t335_defconfig index b390079..9ebd327 100644 --- a/configs/cm_t335_defconfig +++ b/configs/cm_t335_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_CM_T335=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/cm_t3517_defconfig b/configs/cm_t3517_defconfig index c3d02e5..57b44ba 100644 --- a/configs/cm_t3517_defconfig +++ b/configs/cm_t3517_defconfig @@ -1,4 +1,7 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_CM_T3517=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/cm_t35_defconfig b/configs/cm_t35_defconfig index bbc60ff..c8dc124 100644 --- a/configs/cm_t35_defconfig +++ b/configs/cm_t35_defconfig @@ -2,4 +2,7 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_CM_T35=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/cm_t54_defconfig b/configs/cm_t54_defconfig index 762a216..af7c880 100644 --- a/configs/cm_t54_defconfig +++ b/configs/cm_t54_defconfig @@ -2,4 +2,7 @@ CONFIG_ARM=y CONFIG_OMAP54XX=y CONFIG_TARGET_CM_T54=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/cmi_mpc5xx_defconfig b/configs/cmi_mpc5xx_defconfig index 5c855b1..abebfab 100644 --- a/configs/cmi_mpc5xx_defconfig +++ b/configs/cmi_mpc5xx_defconfig @@ -1,3 +1,6 @@ CONFIG_PPC=y CONFIG_5xx=y CONFIG_TARGET_CMI_MPC5XX=y +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/cobra5272_defconfig b/configs/cobra5272_defconfig index 007e30b..2ccb80c 100644 --- a/configs/cobra5272_defconfig +++ b/configs/cobra5272_defconfig @@ -1,3 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_COBRA5272=y -CONFIG_CMD_NET=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/colibri_pxa270_defconfig b/configs/colibri_pxa270_defconfig index de2ad14..3963a50 100644 --- a/configs/colibri_pxa270_defconfig +++ b/configs/colibri_pxa270_defconfig @@ -1,3 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_COLIBRI_PXA270=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/colibri_t20_defconfig b/configs/colibri_t20_defconfig index e1505c0..4e1369b 100644 --- a/configs/colibri_t20_defconfig +++ b/configs/colibri_t20_defconfig @@ -3,8 +3,11 @@ CONFIG_TEGRA=y CONFIG_TEGRA20=y CONFIG_TARGET_COLIBRI_T20=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-colibri" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_NFS is not set CONFIG_SPL_DM=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/colibri_t30_defconfig b/configs/colibri_t30_defconfig index e2fda6e..45cf20a 100644 --- a/configs/colibri_t30_defconfig +++ b/configs/colibri_t30_defconfig @@ -3,8 +3,11 @@ CONFIG_TEGRA=y CONFIG_TEGRA30=y CONFIG_TARGET_COLIBRI_T30=y CONFIG_DEFAULT_DEVICE_TREE="tegra30-colibri" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_NFS is not set CONFIG_SPL_DM=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig index e4c2f73..ffb3b4f 100644 --- a/configs/colibri_vf_defconfig +++ b/configs/colibri_vf_defconfig @@ -1,7 +1,8 @@ CONFIG_ARM=y CONFIG_TARGET_COLIBRI_VF=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,ENV_IS_IN_NAND,IMX_NAND" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_DM=y CONFIG_NAND_VF610_NFC=y CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y diff --git a/configs/colibri_vf_dtb_defconfig b/configs/colibri_vf_dtb_defconfig index 5d1ea65..49f2105 100644 --- a/configs/colibri_vf_dtb_defconfig +++ b/configs/colibri_vf_dtb_defconfig @@ -2,6 +2,9 @@ CONFIG_ARM=y CONFIG_TARGET_COLIBRI_VF=y CONFIG_DEFAULT_DEVICE_TREE="vf610-colibri" CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,ENV_IS_IN_NAND,IMX_NAND" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set CONFIG_OF_CONTROL=y CONFIG_DM=y CONFIG_NAND_VF610_NFC=y diff --git a/configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig b/configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig index cc2fd83..37ead03 100644 --- a/configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig +++ b/configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig @@ -2,6 +2,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_CONTROLCENTERD=y CONFIG_SYS_EXTRA_OPTIONS="36BIT,SDCARD,DEVELOP" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/controlcenterd_36BIT_SDCARD_defconfig b/configs/controlcenterd_36BIT_SDCARD_defconfig index 60d4bf5..7166edb 100644 --- a/configs/controlcenterd_36BIT_SDCARD_defconfig +++ b/configs/controlcenterd_36BIT_SDCARD_defconfig @@ -2,6 +2,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_CONTROLCENTERD=y CONFIG_SYS_EXTRA_OPTIONS="36BIT,SDCARD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig b/configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig index f61fcf8..d99fcd4 100644 --- a/configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig +++ b/configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig @@ -3,4 +3,6 @@ CONFIG_MPC85xx=y CONFIG_TARGET_CONTROLCENTERD=y CONFIG_SYS_EXTRA_OPTIONS="TRAILBLAZER,SPIFLASH,DEVELOP" # CONFIG_CMD_BOOTM is not set -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/controlcenterd_TRAILBLAZER_defconfig b/configs/controlcenterd_TRAILBLAZER_defconfig index 4fc8b04..3557aea 100644 --- a/configs/controlcenterd_TRAILBLAZER_defconfig +++ b/configs/controlcenterd_TRAILBLAZER_defconfig @@ -3,4 +3,6 @@ CONFIG_MPC85xx=y CONFIG_TARGET_CONTROLCENTERD=y CONFIG_SYS_EXTRA_OPTIONS="TRAILBLAZER,SPIFLASH" # CONFIG_CMD_BOOTM is not set -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/coreboot-x86_defconfig b/configs/coreboot-x86_defconfig index cc397a8..581df0a 100644 --- a/configs/coreboot-x86_defconfig +++ b/configs/coreboot-x86_defconfig @@ -2,7 +2,10 @@ CONFIG_X86=y CONFIG_VENDOR_COREBOOT=y CONFIG_TARGET_COREBOOT=y CONFIG_TSC_CALIBRATION_BYPASS=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y CONFIG_CMD_BOOTSTAGE=y diff --git a/configs/corvus_defconfig b/configs/corvus_defconfig index eb11174..13afb08 100644 --- a/configs/corvus_defconfig +++ b/configs/corvus_defconfig @@ -3,4 +3,9 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_CORVUS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,MACH_TYPE=2066,SYS_USE_NANDFLASH" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/cpu9260_128M_defconfig b/configs/cpu9260_128M_defconfig index 7e93b3e..f423980 100644 --- a/configs/cpu9260_128M_defconfig +++ b/configs/cpu9260_128M_defconfig @@ -2,4 +2,9 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_CPU9260=y CONFIG_SYS_EXTRA_OPTIONS="CPU9260,CPU9260_128M" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/cpu9260_defconfig b/configs/cpu9260_defconfig index a1f4398..88afe9f 100644 --- a/configs/cpu9260_defconfig +++ b/configs/cpu9260_defconfig @@ -2,4 +2,9 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_CPU9260=y CONFIG_SYS_EXTRA_OPTIONS="CPU9260" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/cpu9260_nand_128M_defconfig b/configs/cpu9260_nand_128M_defconfig index 135e1fa..f59b000 100644 --- a/configs/cpu9260_nand_128M_defconfig +++ b/configs/cpu9260_nand_128M_defconfig @@ -2,4 +2,9 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_CPU9260=y CONFIG_SYS_EXTRA_OPTIONS="CPU9260,CPU9260_128M,NANDBOOT" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/cpu9260_nand_defconfig b/configs/cpu9260_nand_defconfig index 4aadb29..e914c2b 100644 --- a/configs/cpu9260_nand_defconfig +++ b/configs/cpu9260_nand_defconfig @@ -2,4 +2,9 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_CPU9260=y CONFIG_SYS_EXTRA_OPTIONS="CPU9260,NANDBOOT" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/cpu9G20_128M_defconfig b/configs/cpu9G20_128M_defconfig index aa95f79..d215cc0 100644 --- a/configs/cpu9G20_128M_defconfig +++ b/configs/cpu9G20_128M_defconfig @@ -2,4 +2,9 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_CPU9260=y CONFIG_SYS_EXTRA_OPTIONS="CPU9G20,CPU9G20_128M" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/cpu9G20_defconfig b/configs/cpu9G20_defconfig index a13f6cb..51b19f0 100644 --- a/configs/cpu9G20_defconfig +++ b/configs/cpu9G20_defconfig @@ -2,4 +2,9 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_CPU9260=y CONFIG_SYS_EXTRA_OPTIONS="CPU9G20" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/cpu9G20_nand_128M_defconfig b/configs/cpu9G20_nand_128M_defconfig index a7d473e..da4cbdd 100644 --- a/configs/cpu9G20_nand_128M_defconfig +++ b/configs/cpu9G20_nand_128M_defconfig @@ -2,4 +2,9 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_CPU9260=y CONFIG_SYS_EXTRA_OPTIONS="CPU9G20,CPU9G20_128M,NANDBOOT" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/cpu9G20_nand_defconfig b/configs/cpu9G20_nand_defconfig index d021c8d..b9e4b3c 100644 --- a/configs/cpu9G20_nand_defconfig +++ b/configs/cpu9G20_nand_defconfig @@ -2,4 +2,9 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_CPU9260=y CONFIG_SYS_EXTRA_OPTIONS="CPU9G20,NANDBOOT" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/cpuat91_defconfig b/configs/cpuat91_defconfig index 386912a..cfc62aa 100644 --- a/configs/cpuat91_defconfig +++ b/configs/cpuat91_defconfig @@ -5,4 +5,8 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/cpuat91_ram_defconfig b/configs/cpuat91_ram_defconfig index 8095aee..188c2b9 100644 --- a/configs/cpuat91_ram_defconfig +++ b/configs/cpuat91_ram_defconfig @@ -6,4 +6,8 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/crownbay_defconfig b/configs/crownbay_defconfig index c6f9449..f3fb206 100644 --- a/configs/crownbay_defconfig +++ b/configs/crownbay_defconfig @@ -3,7 +3,10 @@ CONFIG_VENDOR_INTEL=y CONFIG_DEFAULT_DEVICE_TREE="crownbay" CONFIG_TARGET_CROWNBAY=y CONFIG_GENERATE_PIRQ_TABLE=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y CONFIG_CMD_BOOTSTAGE=y diff --git a/configs/csb272_defconfig b/configs/csb272_defconfig index 5ac3c19..c9cc680 100644 --- a/configs/csb272_defconfig +++ b/configs/csb272_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_CSB272=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/csb472_defconfig b/configs/csb472_defconfig index 7c43e57..e46b965 100644 --- a/configs/csb472_defconfig +++ b/configs/csb472_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_CSB472=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/d2net_v2_defconfig b/configs/d2net_v2_defconfig index 4a9053e..d5f783f 100644 --- a/configs/d2net_v2_defconfig +++ b/configs/d2net_v2_defconfig @@ -2,5 +2,7 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_NET2BIG_V2=y CONFIG_SYS_EXTRA_OPTIONS="D2NET_V2" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/da830evm_defconfig b/configs/da830evm_defconfig index 0d91d7a..e0c8e25 100644 --- a/configs/da830evm_defconfig +++ b/configs/da830evm_defconfig @@ -1,5 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_DA830EVM=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/da850_am18xxevm_defconfig b/configs/da850_am18xxevm_defconfig index 09ccaf2..ffdabab 100644 --- a/configs/da850_am18xxevm_defconfig +++ b/configs/da850_am18xxevm_defconfig @@ -3,5 +3,7 @@ CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_DA850EVM=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="DA850_AM18X_EVM,MAC_ADDR_IN_EEPROM,SYS_I2C_EEPROM_ADDR_LEN=2,SYS_I2C_EEPROM_ADDR=0x50" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig index 40a0395..41395e3 100644 --- a/configs/da850evm_defconfig +++ b/configs/da850evm_defconfig @@ -3,5 +3,7 @@ CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_DA850EVM=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/da850evm_direct_nor_defconfig b/configs/da850evm_direct_nor_defconfig index 9a32c20..a1cba1a 100644 --- a/configs/da850evm_direct_nor_defconfig +++ b/configs/da850evm_direct_nor_defconfig @@ -2,5 +2,5 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_DA850EVM=y CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH,USE_NOR,DIRECT_NOR_BOOT" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/dalmore_defconfig b/configs/dalmore_defconfig index 532e2b1..e7443f8 100644 --- a/configs/dalmore_defconfig +++ b/configs/dalmore_defconfig @@ -3,7 +3,12 @@ CONFIG_TEGRA=y CONFIG_TEGRA114=y CONFIG_TARGET_DALMORE=y CONFIG_DEFAULT_DEVICE_TREE="tegra114-dalmore" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_SPL_DM=y CONFIG_SPI_FLASH=y CONFIG_USB=y diff --git a/configs/davinci_dm355evm_defconfig b/configs/davinci_dm355evm_defconfig index 874decb..f10b643 100644 --- a/configs/davinci_dm355evm_defconfig +++ b/configs/davinci_dm355evm_defconfig @@ -1,4 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_DAVINCI_DM355EVM=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/davinci_dm355leopard_defconfig b/configs/davinci_dm355leopard_defconfig index 2655001..7b33f6d 100644 --- a/configs/davinci_dm355leopard_defconfig +++ b/configs/davinci_dm355leopard_defconfig @@ -1,4 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_DAVINCI_DM355LEOPARD=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/davinci_dm365evm_defconfig b/configs/davinci_dm365evm_defconfig index b7ccfae..f139b58 100644 --- a/configs/davinci_dm365evm_defconfig +++ b/configs/davinci_dm365evm_defconfig @@ -1,4 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_DAVINCI_DM365EVM=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/davinci_dm6467Tevm_defconfig b/configs/davinci_dm6467Tevm_defconfig index 87bc077..3749b81 100644 --- a/configs/davinci_dm6467Tevm_defconfig +++ b/configs/davinci_dm6467Tevm_defconfig @@ -2,4 +2,8 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_DAVINCI_DM6467EVM=y CONFIG_SYS_EXTRA_OPTIONS="DAVINCI_DM6467TEVM,REFCLK_FREQ=33000000" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/davinci_dm6467evm_defconfig b/configs/davinci_dm6467evm_defconfig index b7f94b2..2a5262a 100644 --- a/configs/davinci_dm6467evm_defconfig +++ b/configs/davinci_dm6467evm_defconfig @@ -2,4 +2,8 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_DAVINCI_DM6467EVM=y CONFIG_SYS_EXTRA_OPTIONS="REFCLK_FREQ=27000000" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/davinci_dvevm_defconfig b/configs/davinci_dvevm_defconfig index 0ef6645..aa30d1b 100644 --- a/configs/davinci_dvevm_defconfig +++ b/configs/davinci_dvevm_defconfig @@ -1,4 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_DAVINCI_DVEVM=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/davinci_schmoogie_defconfig b/configs/davinci_schmoogie_defconfig index ef7f8bb..7c11c8c 100644 --- a/configs/davinci_schmoogie_defconfig +++ b/configs/davinci_schmoogie_defconfig @@ -1,4 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_DAVINCI_SCHMOOGIE=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/davinci_sffsdr_defconfig b/configs/davinci_sffsdr_defconfig index 4c1e411..7aca606 100644 --- a/configs/davinci_sffsdr_defconfig +++ b/configs/davinci_sffsdr_defconfig @@ -1,4 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_DAVINCI_SFFSDR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/davinci_sonata_defconfig b/configs/davinci_sonata_defconfig index dd90bc0..6014eee 100644 --- a/configs/davinci_sonata_defconfig +++ b/configs/davinci_sonata_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_DAVINCI_SONATA=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/db-88f6820-gp_defconfig b/configs/db-88f6820-gp_defconfig index 7726314..569ddfd 100644 --- a/configs/db-88f6820-gp_defconfig +++ b/configs/db-88f6820-gp_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_DB_88F6820_GP=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/db-mv784mp-gp_defconfig b/configs/db-mv784mp-gp_defconfig index 6ce5cff..d11377f 100644 --- a/configs/db-mv784mp-gp_defconfig +++ b/configs/db-mv784mp-gp_defconfig @@ -1,5 +1,7 @@ CONFIG_ARM=y CONFIG_TARGET_DB_MV784MP_GP=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/dbau1000_defconfig b/configs/dbau1000_defconfig index 65d7c4b..58da5b7 100644 --- a/configs/dbau1000_defconfig +++ b/configs/dbau1000_defconfig @@ -1,5 +1,12 @@ CONFIG_MIPS=y CONFIG_TARGET_DBAU1X00=y CONFIG_SYS_EXTRA_OPTIONS="DBAU1000" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/dbau1100_defconfig b/configs/dbau1100_defconfig index a60096f..14aeb4c 100644 --- a/configs/dbau1100_defconfig +++ b/configs/dbau1100_defconfig @@ -1,5 +1,12 @@ CONFIG_MIPS=y CONFIG_TARGET_DBAU1X00=y CONFIG_DBAU1100=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/dbau1500_defconfig b/configs/dbau1500_defconfig index 73a0116..699b968 100644 --- a/configs/dbau1500_defconfig +++ b/configs/dbau1500_defconfig @@ -1,5 +1,12 @@ CONFIG_MIPS=y CONFIG_TARGET_DBAU1X00=y CONFIG_DBAU1500=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/dbau1550_defconfig b/configs/dbau1550_defconfig index 864eaa8..6b17da7 100644 --- a/configs/dbau1550_defconfig +++ b/configs/dbau1550_defconfig @@ -1,5 +1,10 @@ CONFIG_MIPS=y CONFIG_TARGET_DBAU1X00=y CONFIG_DBAU1550=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/dbau1550_el_defconfig b/configs/dbau1550_el_defconfig index 07dd6b3..845bc87 100644 --- a/configs/dbau1550_el_defconfig +++ b/configs/dbau1550_el_defconfig @@ -2,5 +2,10 @@ CONFIG_MIPS=y CONFIG_TARGET_DBAU1X00=y CONFIG_DBAU1550=y CONFIG_SYS_LITTLE_ENDIAN=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/devconcenter_defconfig b/configs/devconcenter_defconfig index 99d57ea..ecf766e 100644 --- a/configs/devconcenter_defconfig +++ b/configs/devconcenter_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_INTIP=y CONFIG_SYS_EXTRA_OPTIONS="DEVCONCENTER" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig index 3da2c61..f0c4ee1 100644 --- a/configs/devkit3250_defconfig +++ b/configs/devkit3250_defconfig @@ -1,3 +1,3 @@ CONFIG_ARM=y CONFIG_TARGET_DEVKIT3250=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/devkit8000_defconfig b/configs/devkit8000_defconfig index f592124..60ead72 100644 --- a/configs/devkit8000_defconfig +++ b/configs/devkit8000_defconfig @@ -2,4 +2,8 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_DEVKIT8000=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/dig297_defconfig b/configs/dig297_defconfig index a50ca2b..483c20e 100644 --- a/configs/dig297_defconfig +++ b/configs/dig297_defconfig @@ -1,4 +1,9 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_DIG297=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/digsy_mtc_RAMBOOT_defconfig b/configs/digsy_mtc_RAMBOOT_defconfig index 85c5ed9..17ac961 100644 --- a/configs/digsy_mtc_RAMBOOT_defconfig +++ b/configs/digsy_mtc_RAMBOOT_defconfig @@ -6,4 +6,4 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/digsy_mtc_defconfig b/configs/digsy_mtc_defconfig index d1bc949..913ba7e 100644 --- a/configs/digsy_mtc_defconfig +++ b/configs/digsy_mtc_defconfig @@ -4,4 +4,4 @@ CONFIG_TARGET_DIGSY_MTC=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR=" " -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/digsy_mtc_rev5_RAMBOOT_defconfig b/configs/digsy_mtc_rev5_RAMBOOT_defconfig index 63624f5..408cff5 100644 --- a/configs/digsy_mtc_rev5_RAMBOOT_defconfig +++ b/configs/digsy_mtc_rev5_RAMBOOT_defconfig @@ -6,4 +6,4 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/digsy_mtc_rev5_defconfig b/configs/digsy_mtc_rev5_defconfig index f015603..e950eb3 100644 --- a/configs/digsy_mtc_rev5_defconfig +++ b/configs/digsy_mtc_rev5_defconfig @@ -6,4 +6,4 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/dlvision-10g_defconfig b/configs/dlvision-10g_defconfig index b58fb55..4ed14f8 100644 --- a/configs/dlvision-10g_defconfig +++ b/configs/dlvision-10g_defconfig @@ -3,5 +3,4 @@ CONFIG_4xx=y CONFIG_TARGET_DLVISION_10G=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_NFS is not set diff --git a/configs/dlvision_defconfig b/configs/dlvision_defconfig index c381757..7982c17 100644 --- a/configs/dlvision_defconfig +++ b/configs/dlvision_defconfig @@ -1,5 +1,4 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_DLVISION=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_NFS is not set diff --git a/configs/dnp5370_defconfig b/configs/dnp5370_defconfig index e8aba3d..b809dfa 100644 --- a/configs/dnp5370_defconfig +++ b/configs/dnp5370_defconfig @@ -1,4 +1,4 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_DNP5370=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y diff --git a/configs/dns325_defconfig b/configs/dns325_defconfig index 8f50524..c56dc5b 100644 --- a/configs/dns325_defconfig +++ b/configs/dns325_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_DNS325=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/dockstar_defconfig b/configs/dockstar_defconfig index 523a3ed..40f6e0f 100644 --- a/configs/dockstar_defconfig +++ b/configs/dockstar_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_DOCKSTAR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig index 8a78014..1a0e01f 100644 --- a/configs/dra7xx_evm_defconfig +++ b/configs/dra7xx_evm_defconfig @@ -3,5 +3,8 @@ CONFIG_OMAP54XX=y CONFIG_TARGET_DRA7XX_EVM=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_SPI_FLASH=y diff --git a/configs/dra7xx_evm_qspiboot_defconfig b/configs/dra7xx_evm_qspiboot_defconfig index 4cc5f05..90e3cf4 100644 --- a/configs/dra7xx_evm_qspiboot_defconfig +++ b/configs/dra7xx_evm_qspiboot_defconfig @@ -3,5 +3,8 @@ CONFIG_OMAP54XX=y CONFIG_TARGET_DRA7XX_EVM=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1,QSPI_BOOT" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_SPI_FLASH=y diff --git a/configs/dra7xx_evm_uart3_defconfig b/configs/dra7xx_evm_uart3_defconfig index c564b32..474cada 100644 --- a/configs/dra7xx_evm_uart3_defconfig +++ b/configs/dra7xx_evm_uart3_defconfig @@ -3,5 +3,8 @@ CONFIG_OMAP54XX=y CONFIG_TARGET_DRA7XX_EVM=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=3,SPL_YMODEM_SUPPORT" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_SPI_FLASH=y diff --git a/configs/draco_defconfig b/configs/draco_defconfig index 3d09367..8b177b3 100644 --- a/configs/draco_defconfig +++ b/configs/draco_defconfig @@ -4,5 +4,7 @@ CONFIG_SPL=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/dreamplug_defconfig b/configs/dreamplug_defconfig index 2a3307c..501fbbf 100644 --- a/configs/dreamplug_defconfig +++ b/configs/dreamplug_defconfig @@ -1,5 +1,7 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_DREAMPLUG=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/duovero_defconfig b/configs/duovero_defconfig index 59863dd..57410d3 100644 --- a/configs/duovero_defconfig +++ b/configs/duovero_defconfig @@ -2,4 +2,7 @@ CONFIG_ARM=y CONFIG_OMAP44XX=y CONFIG_TARGET_DUOVERO=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/ea20_defconfig b/configs/ea20_defconfig index bed22c0..388dfec 100644 --- a/configs/ea20_defconfig +++ b/configs/ea20_defconfig @@ -1,5 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_EA20=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/eb_cpu5282_defconfig b/configs/eb_cpu5282_defconfig index ed9c66a..1e19d3a 100644 --- a/configs/eb_cpu5282_defconfig +++ b/configs/eb_cpu5282_defconfig @@ -1,4 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_EB_CPU5282=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xFF000000,SYS_MONITOR_BASE=0xFF000400" -CONFIG_CMD_NET=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/eb_cpu5282_internal_defconfig b/configs/eb_cpu5282_internal_defconfig index 567f0b0..5af19a0 100644 --- a/configs/eb_cpu5282_internal_defconfig +++ b/configs/eb_cpu5282_internal_defconfig @@ -1,4 +1,5 @@ CONFIG_M68K=y CONFIG_TARGET_EB_CPU5282=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF0000000,SYS_MONITOR_BASE=0xF0000418" -CONFIG_CMD_NET=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/eb_cpux9k2_defconfig b/configs/eb_cpux9k2_defconfig index e7f62c7..bff6595 100644 --- a/configs/eb_cpux9k2_defconfig +++ b/configs/eb_cpux9k2_defconfig @@ -1,4 +1,4 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_EB_CPUX9K2=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/eb_cpux9k2_ram_defconfig b/configs/eb_cpux9k2_ram_defconfig index 2716774..47c2178 100644 --- a/configs/eb_cpux9k2_ram_defconfig +++ b/configs/eb_cpux9k2_ram_defconfig @@ -2,4 +2,4 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_EB_CPUX9K2=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/ebony_defconfig b/configs/ebony_defconfig index 6165a7b..db93555 100644 --- a/configs/ebony_defconfig +++ b/configs/ebony_defconfig @@ -1,5 +1,3 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_EBONY=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/eco5pk_defconfig b/configs/eco5pk_defconfig index 44b096b..c43603b 100644 --- a/configs/eco5pk_defconfig +++ b/configs/eco5pk_defconfig @@ -2,4 +2,6 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_ECO5PK=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/ecovec_defconfig b/configs/ecovec_defconfig index 4cdf8a3..de4617c 100644 --- a/configs/ecovec_defconfig +++ b/configs/ecovec_defconfig @@ -1,4 +1,20 @@ CONFIG_SH=y CONFIG_TARGET_ECOVEC=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/edb9315a_defconfig b/configs/edb9315a_defconfig index 839efb5..452bf0d 100644 --- a/configs/edb9315a_defconfig +++ b/configs/edb9315a_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_EDB93XX=y CONFIG_SYS_EXTRA_OPTIONS="MK_edb9315a" -CONFIG_CMD_NET=y +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/edminiv2_defconfig b/configs/edminiv2_defconfig index 510bcce..80ff33f 100644 --- a/configs/edminiv2_defconfig +++ b/configs/edminiv2_defconfig @@ -2,4 +2,4 @@ CONFIG_ARM=y CONFIG_ORION5X=y CONFIG_TARGET_EDMINIV2=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/enbw_cmc_defconfig b/configs/enbw_cmc_defconfig index d8e03c0..90249f3 100644 --- a/configs/enbw_cmc_defconfig +++ b/configs/enbw_cmc_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_ENBW_CMC=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/espt_defconfig b/configs/espt_defconfig index 95bfe9a..fbb712d 100644 --- a/configs/espt_defconfig +++ b/configs/espt_defconfig @@ -1,4 +1,20 @@ CONFIG_SH=y CONFIG_TARGET_ESPT=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/ethernut5_defconfig b/configs/ethernut5_defconfig index dddc7d7..d2379ec 100644 --- a/configs/ethernut5_defconfig +++ b/configs/ethernut5_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_ETHERNUT5=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set CONFIG_SPI_FLASH=y diff --git a/configs/flea3_defconfig b/configs/flea3_defconfig index 22844cc..7ea5da2 100644 --- a/configs/flea3_defconfig +++ b/configs/flea3_defconfig @@ -1,3 +1,3 @@ CONFIG_ARM=y CONFIG_TARGET_FLEA3=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/fo300_defconfig b/configs/fo300_defconfig index dbf0ef5..b8e5c80 100644 --- a/configs/fo300_defconfig +++ b/configs/fo300_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_TQM5200=y CONFIG_SYS_EXTRA_OPTIONS="FO300" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/forfun_q88db_defconfig b/configs/forfun_q88db_defconfig index 697de9c..85c807a 100644 --- a/configs/forfun_q88db_defconfig +++ b/configs/forfun_q88db_defconfig @@ -14,8 +14,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-forfun-q88db" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y diff --git a/configs/fx12mm_defconfig b/configs/fx12mm_defconfig index a84dc65..1013b70 100644 --- a/configs/fx12mm_defconfig +++ b/configs/fx12mm_defconfig @@ -2,3 +2,7 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_FX12MM=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,INIT_TLB=board/xilinx/ppc405-generic/init.o" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/fx12mm_flash_defconfig b/configs/fx12mm_flash_defconfig index cd28f33..60eee67 100644 --- a/configs/fx12mm_flash_defconfig +++ b/configs/fx12mm_flash_defconfig @@ -2,3 +2,7 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_FX12MM=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC,INIT_TLB=board/xilinx/ppc405-generic/init.o" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig index 25f4199..315627d 100644 --- a/configs/ga10h_v1_1_defconfig +++ b/configs/ga10h_v1_1_defconfig @@ -18,10 +18,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ga10h-v1.1" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3000 diff --git a/configs/galileo_defconfig b/configs/galileo_defconfig index f01103d..1ced47e 100644 --- a/configs/galileo_defconfig +++ b/configs/galileo_defconfig @@ -3,7 +3,10 @@ CONFIG_VENDOR_INTEL=y CONFIG_DEFAULT_DEVICE_TREE="galileo" CONFIG_TARGET_GALILEO=y CONFIG_GENERATE_PIRQ_TABLE=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y CONFIG_CMD_BOOTSTAGE=y diff --git a/configs/gdppc440etx_defconfig b/configs/gdppc440etx_defconfig index 81ad845..2dfebbb 100644 --- a/configs/gdppc440etx_defconfig +++ b/configs/gdppc440etx_defconfig @@ -3,5 +3,3 @@ CONFIG_4xx=y CONFIG_TARGET_GDPPC440ETX=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/glacier_defconfig b/configs/glacier_defconfig index 926d391..d318f82 100644 --- a/configs/glacier_defconfig +++ b/configs/glacier_defconfig @@ -3,7 +3,5 @@ CONFIG_4xx=y CONFIG_TARGET_CANYONLANDS=y CONFIG_GLACIER=y CONFIG_DEFAULT_DEVICE_TREE="glacier" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y diff --git a/configs/glacier_ramboot_defconfig b/configs/glacier_ramboot_defconfig index f4041e8..98bcaf4 100644 --- a/configs/glacier_ramboot_defconfig +++ b/configs/glacier_ramboot_defconfig @@ -4,7 +4,5 @@ CONFIG_TARGET_CANYONLANDS=y CONFIG_GLACIER=y CONFIG_DEFAULT_DEVICE_TREE="glacier" CONFIG_SYS_EXTRA_OPTIONS="SYS_RAMBOOT,SYS_TEXT_BASE=0x01000000,SYS_LDSCRIPT=board/amcc/canyonlands/u-boot-ram.lds" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y diff --git a/configs/goflexhome_defconfig b/configs/goflexhome_defconfig index c6c3ef7..d1b9ba1 100644 --- a/configs/goflexhome_defconfig +++ b/configs/goflexhome_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_GOFLEXHOME=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/gose_defconfig b/configs/gose_defconfig index 76b81dc..bece0aa 100644 --- a/configs/gose_defconfig +++ b/configs/gose_defconfig @@ -1,6 +1,20 @@ CONFIG_ARM=y CONFIG_RMOBILE=y CONFIG_TARGET_GOSE=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set CONFIG_SPI_FLASH=y CONFIG_SH_SDHI=y diff --git a/configs/gplugd_defconfig b/configs/gplugd_defconfig index 7e367a8..ab3f760 100644 --- a/configs/gplugd_defconfig +++ b/configs/gplugd_defconfig @@ -1,4 +1,7 @@ CONFIG_ARM=y CONFIG_TARGET_GPLUGD=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/gr_cpci_ax2000_defconfig b/configs/gr_cpci_ax2000_defconfig index f2fb544..f003d77 100644 --- a/configs/gr_cpci_ax2000_defconfig +++ b/configs/gr_cpci_ax2000_defconfig @@ -1,4 +1,4 @@ CONFIG_SPARC=y CONFIG_TARGET_GR_CPCI_AX2000=y CONFIG_SYS_TEXT_BASE=0x00000000 -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/gr_ep2s60_defconfig b/configs/gr_ep2s60_defconfig index 7afd109..bbf1808 100644 --- a/configs/gr_ep2s60_defconfig +++ b/configs/gr_ep2s60_defconfig @@ -1,4 +1,4 @@ CONFIG_SPARC=y CONFIG_TARGET_GR_EP2S60=y CONFIG_SYS_TEXT_BASE=0x00000000 -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/gr_xc3s_1500_defconfig b/configs/gr_xc3s_1500_defconfig index cac67c2..5c1442d 100644 --- a/configs/gr_xc3s_1500_defconfig +++ b/configs/gr_xc3s_1500_defconfig @@ -1,4 +1,4 @@ CONFIG_SPARC=y CONFIG_TARGET_GR_XC3S_1500=y CONFIG_SYS_TEXT_BASE=0x00000000 -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/grasshopper_defconfig b/configs/grasshopper_defconfig index 97f2915..2d9c8ad 100644 --- a/configs/grasshopper_defconfig +++ b/configs/grasshopper_defconfig @@ -4,4 +4,5 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_NET=y +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/grsim_defconfig b/configs/grsim_defconfig index d114a86..b83abb6 100644 --- a/configs/grsim_defconfig +++ b/configs/grsim_defconfig @@ -1,4 +1,13 @@ CONFIG_SPARC=y CONFIG_TARGET_GRSIM=y CONFIG_SYS_TEXT_BASE=0x00000000 -CONFIG_CMD_NET=y +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_MEMORY is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/grsim_leon2_defconfig b/configs/grsim_leon2_defconfig index f28ad4a..756a786 100644 --- a/configs/grsim_leon2_defconfig +++ b/configs/grsim_leon2_defconfig @@ -1,3 +1,14 @@ CONFIG_SPARC=y CONFIG_TARGET_GRSIM_LEON2=y CONFIG_SYS_TEXT_BASE=0x00000000 +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_MEMORY is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/guruplug_defconfig b/configs/guruplug_defconfig index 8d3d8c2..20b83e3 100644 --- a/configs/guruplug_defconfig +++ b/configs/guruplug_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_GURUPLUG=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/gwventana_defconfig b/configs/gwventana_defconfig index dfb24b0..401f77e 100644 --- a/configs/gwventana_defconfig +++ b/configs/gwventana_defconfig @@ -4,7 +4,7 @@ CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_ADDR=0x18000000 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_DM=y CONFIG_DM_SERIAL=y diff --git a/configs/h2200_defconfig b/configs/h2200_defconfig index 40c28ee..f90a4a6 100644 --- a/configs/h2200_defconfig +++ b/configs/h2200_defconfig @@ -1,3 +1,19 @@ CONFIG_ARM=y CONFIG_TARGET_H2200=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_MEMORY is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set diff --git a/configs/haleakala_defconfig b/configs/haleakala_defconfig index ba33749..81e3398 100644 --- a/configs/haleakala_defconfig +++ b/configs/haleakala_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_KILAUEA=y CONFIG_SYS_EXTRA_OPTIONS="HALEAKALA" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/harmony_defconfig b/configs/harmony_defconfig index 74656cc..d88a082 100644 --- a/configs/harmony_defconfig +++ b/configs/harmony_defconfig @@ -3,7 +3,12 @@ CONFIG_TEGRA=y CONFIG_TEGRA20=y CONFIG_TARGET_HARMONY=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-harmony" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_SPL_DM=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/highbank_defconfig b/configs/highbank_defconfig index ae74ba1..f7042e2 100644 --- a/configs/highbank_defconfig +++ b/configs/highbank_defconfig @@ -3,4 +3,6 @@ CONFIG_ARCH_HIGHBANK=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds...\nPress to stop or to delay\n" CONFIG_AUTOBOOT_KEYED_CTRLC=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/hrcon_defconfig b/configs/hrcon_defconfig index cf2cdc8..6b2b5d3 100644 --- a/configs/hrcon_defconfig +++ b/configs/hrcon_defconfig @@ -3,4 +3,4 @@ CONFIG_MPC83xx=y CONFIG_TARGET_HRCON=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/i12-tvbox_defconfig b/configs/i12-tvbox_defconfig index 371251c..3a69422 100644 --- a/configs/i12-tvbox_defconfig +++ b/configs/i12-tvbox_defconfig @@ -6,10 +6,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-i12-tvbox" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_DM_SERIAL=y CONFIG_USB=y diff --git a/configs/iNet_3F_defconfig b/configs/iNet_3F_defconfig index cc5db7e..54de300 100644 --- a/configs/iNet_3F_defconfig +++ b/configs/iNet_3F_defconfig @@ -16,8 +16,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet-3f" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y diff --git a/configs/iNet_3W_defconfig b/configs/iNet_3W_defconfig index fc64fb1..e1beac8 100644 --- a/configs/iNet_3W_defconfig +++ b/configs/iNet_3W_defconfig @@ -16,8 +16,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet-3w" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y diff --git a/configs/iNet_86VS_defconfig b/configs/iNet_86VS_defconfig index edf6e8b..627e211 100644 --- a/configs/iNet_86VS_defconfig +++ b/configs/iNet_86VS_defconfig @@ -14,8 +14,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-inet-86vs" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y diff --git a/configs/ib62x0_defconfig b/configs/ib62x0_defconfig index ea4756f..e418d8f 100644 --- a/configs/ib62x0_defconfig +++ b/configs/ib62x0_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_IB62X0=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/ibf-dsp561_defconfig b/configs/ibf-dsp561_defconfig index 15f24bb..e654a4b 100644 --- a/configs/ibf-dsp561_defconfig +++ b/configs/ibf-dsp561_defconfig @@ -1,4 +1,4 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_IBF_DSP561=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_LIB_RAND=y diff --git a/configs/icon_defconfig b/configs/icon_defconfig index e4ca30a..771a093 100644 --- a/configs/icon_defconfig +++ b/configs/icon_defconfig @@ -1,5 +1,3 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_ICON=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/iconnect_defconfig b/configs/iconnect_defconfig index a96b810..49d4fa0 100644 --- a/configs/iconnect_defconfig +++ b/configs/iconnect_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_ICONNECT=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/ids8313_defconfig b/configs/ids8313_defconfig index 9cb4d31..821c6fa 100644 --- a/configs/ids8313_defconfig +++ b/configs/ids8313_defconfig @@ -7,4 +7,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xFFF00000" CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Enter password - autoboot in %d seconds...\n" CONFIG_AUTOBOOT_DELAY_STR="ids" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/igep0020_defconfig b/configs/igep0020_defconfig index fc8d9c1..e45e83c 100644 --- a/configs/igep0020_defconfig +++ b/configs/igep0020_defconfig @@ -3,4 +3,6 @@ CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_IGEP00X0=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/igep0020_nand_defconfig b/configs/igep0020_nand_defconfig index bf3581d9..75fabef 100644 --- a/configs/igep0020_nand_defconfig +++ b/configs/igep0020_nand_defconfig @@ -3,4 +3,6 @@ CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_IGEP00X0=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/igep0030_defconfig b/configs/igep0030_defconfig index cd9753d..1bb7a6f 100644 --- a/configs/igep0030_defconfig +++ b/configs/igep0030_defconfig @@ -3,4 +3,6 @@ CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_IGEP00X0=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/igep0030_nand_defconfig b/configs/igep0030_nand_defconfig index 8bdd1eb..ed01766 100644 --- a/configs/igep0030_nand_defconfig +++ b/configs/igep0030_nand_defconfig @@ -3,4 +3,6 @@ CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_IGEP00X0=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/igep0032_defconfig b/configs/igep0032_defconfig index ded479a..bfa15d7 100644 --- a/configs/igep0032_defconfig +++ b/configs/igep0032_defconfig @@ -3,4 +3,6 @@ CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_IGEP00X0=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/ima3-mx53_defconfig b/configs/ima3-mx53_defconfig index c5679dd..ef15127 100644 --- a/configs/ima3-mx53_defconfig +++ b/configs/ima3-mx53_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y CONFIG_TARGET_IMA3_MX53=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/esg/ima3-mx53/imximage.cfg" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/imx27lite_defconfig b/configs/imx27lite_defconfig index b83cd24..b02955d 100644 --- a/configs/imx27lite_defconfig +++ b/configs/imx27lite_defconfig @@ -1,3 +1,3 @@ CONFIG_ARM=y CONFIG_TARGET_IMX27LITE=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/imx31_litekit_defconfig b/configs/imx31_litekit_defconfig index 8373c04..b197935 100644 --- a/configs/imx31_litekit_defconfig +++ b/configs/imx31_litekit_defconfig @@ -1,3 +1,3 @@ CONFIG_ARM=y CONFIG_TARGET_IMX31_LITEKIT=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/imx31_phycore_defconfig b/configs/imx31_phycore_defconfig index a388ea7..161a604 100644 --- a/configs/imx31_phycore_defconfig +++ b/configs/imx31_phycore_defconfig @@ -1,3 +1,3 @@ CONFIG_ARM=y CONFIG_TARGET_IMX31_PHYCORE=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/imx31_phycore_eet_defconfig b/configs/imx31_phycore_eet_defconfig index b4d37fd..445c040 100644 --- a/configs/imx31_phycore_eet_defconfig +++ b/configs/imx31_phycore_eet_defconfig @@ -1,4 +1,4 @@ CONFIG_ARM=y CONFIG_TARGET_IMX31_PHYCORE=y CONFIG_SYS_EXTRA_OPTIONS="IMX31_PHYCORE_EET" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/inetspace_v2_defconfig b/configs/inetspace_v2_defconfig index 716111b..f314059 100644 --- a/configs/inetspace_v2_defconfig +++ b/configs/inetspace_v2_defconfig @@ -2,5 +2,7 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_NETSPACE_V2=y CONFIG_SYS_EXTRA_OPTIONS="INETSPACE_V2" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/inka4x0_defconfig b/configs/inka4x0_defconfig index 2c3b9e0..4c1016a 100644 --- a/configs/inka4x0_defconfig +++ b/configs/inka4x0_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_INKA4X0=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/integratorap_cm720t_defconfig b/configs/integratorap_cm720t_defconfig index fccbb3f..369add7 100644 --- a/configs/integratorap_cm720t_defconfig +++ b/configs/integratorap_cm720t_defconfig @@ -2,4 +2,4 @@ CONFIG_ARM=y CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_AP=y CONFIG_CM720T=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/integratorap_cm920t_defconfig b/configs/integratorap_cm920t_defconfig index f2e1fcb..aa27cbd 100644 --- a/configs/integratorap_cm920t_defconfig +++ b/configs/integratorap_cm920t_defconfig @@ -2,4 +2,4 @@ CONFIG_ARM=y CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_AP=y CONFIG_CM920T=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/integratorap_cm926ejs_defconfig b/configs/integratorap_cm926ejs_defconfig index 060c18c..8155b67 100644 --- a/configs/integratorap_cm926ejs_defconfig +++ b/configs/integratorap_cm926ejs_defconfig @@ -2,4 +2,4 @@ CONFIG_ARM=y CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_AP=y CONFIG_CM926EJ_S=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/integratorap_cm946es_defconfig b/configs/integratorap_cm946es_defconfig index dc933c5..b3b5edf 100644 --- a/configs/integratorap_cm946es_defconfig +++ b/configs/integratorap_cm946es_defconfig @@ -2,4 +2,4 @@ CONFIG_ARM=y CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_AP=y CONFIG_CM946ES=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/integratorcp_cm1136_defconfig b/configs/integratorcp_cm1136_defconfig index 5635cb14..5ab7c27 100644 --- a/configs/integratorcp_cm1136_defconfig +++ b/configs/integratorcp_cm1136_defconfig @@ -2,4 +2,4 @@ CONFIG_ARM=y CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_CP=y CONFIG_CM1136=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/integratorcp_cm920t_defconfig b/configs/integratorcp_cm920t_defconfig index 25041ff..d0ed78d 100644 --- a/configs/integratorcp_cm920t_defconfig +++ b/configs/integratorcp_cm920t_defconfig @@ -2,4 +2,4 @@ CONFIG_ARM=y CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_CP=y CONFIG_CM920T=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/integratorcp_cm926ejs_defconfig b/configs/integratorcp_cm926ejs_defconfig index 5c82326..9aa8602 100644 --- a/configs/integratorcp_cm926ejs_defconfig +++ b/configs/integratorcp_cm926ejs_defconfig @@ -2,4 +2,4 @@ CONFIG_ARM=y CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_CP=y CONFIG_CM926EJ_S=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/integratorcp_cm946es_defconfig b/configs/integratorcp_cm946es_defconfig index cd4c94a..ef9d7d6 100644 --- a/configs/integratorcp_cm946es_defconfig +++ b/configs/integratorcp_cm946es_defconfig @@ -2,4 +2,4 @@ CONFIG_ARM=y CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_CP=y CONFIG_CM946ES=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/intip_defconfig b/configs/intip_defconfig index 06d983d..898f544 100644 --- a/configs/intip_defconfig +++ b/configs/intip_defconfig @@ -4,5 +4,3 @@ CONFIG_TARGET_INTIP=y CONFIG_SYS_EXTRA_OPTIONS="INTIB" CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/io64_defconfig b/configs/io64_defconfig index 604cd7e..52829da 100644 --- a/configs/io64_defconfig +++ b/configs/io64_defconfig @@ -3,5 +3,3 @@ CONFIG_4xx=y CONFIG_TARGET_IO64=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/io_defconfig b/configs/io_defconfig index 9e0afee..722d95a 100644 --- a/configs/io_defconfig +++ b/configs/io_defconfig @@ -3,5 +3,4 @@ CONFIG_4xx=y CONFIG_TARGET_IO=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_NFS is not set diff --git a/configs/iocon_defconfig b/configs/iocon_defconfig index e92056e..89e5cf5 100644 --- a/configs/iocon_defconfig +++ b/configs/iocon_defconfig @@ -3,5 +3,4 @@ CONFIG_4xx=y CONFIG_TARGET_IOCON=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_NFS is not set diff --git a/configs/ip04_defconfig b/configs/ip04_defconfig index 53e7dec..0b6de77 100644 --- a/configs/ip04_defconfig +++ b/configs/ip04_defconfig @@ -1,6 +1,8 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_IP04=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/ipam390_defconfig b/configs/ipam390_defconfig index 8233677..c053b38 100644 --- a/configs/ipam390_defconfig +++ b/configs/ipam390_defconfig @@ -2,4 +2,6 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_IPAM390=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/ipek01_defconfig b/configs/ipek01_defconfig index 099bf64..c8ddbc5 100644 --- a/configs/ipek01_defconfig +++ b/configs/ipek01_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_IPEK01=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/jesurun_q5_defconfig b/configs/jesurun_q5_defconfig index 8c17fac..4b09a33 100644 --- a/configs/jesurun_q5_defconfig +++ b/configs/jesurun_q5_defconfig @@ -6,10 +6,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-jesurun-q5" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI,MACPWR=SUNXI_GPH(19)" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/jetson-tk1_defconfig b/configs/jetson-tk1_defconfig index d7af52d..7085469 100644 --- a/configs/jetson-tk1_defconfig +++ b/configs/jetson-tk1_defconfig @@ -3,7 +3,12 @@ CONFIG_TEGRA=y CONFIG_TEGRA124=y CONFIG_TARGET_JETSON_TK1=y CONFIG_DEFAULT_DEVICE_TREE="tegra124-jetson-tk1" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_SPL_DM=y CONFIG_SPI_FLASH=y CONFIG_USB=y diff --git a/configs/jornada_defconfig b/configs/jornada_defconfig index ad1c338..735c75f 100644 --- a/configs/jornada_defconfig +++ b/configs/jornada_defconfig @@ -1,2 +1,8 @@ CONFIG_ARM=y CONFIG_TARGET_JORNADA=y +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set diff --git a/configs/jupiter_defconfig b/configs/jupiter_defconfig index 02c63e1..a3c259f 100644 --- a/configs/jupiter_defconfig +++ b/configs/jupiter_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_JUPITER=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/k2e_evm_defconfig b/configs/k2e_evm_defconfig index ac72e71..f422886 100644 --- a/configs/k2e_evm_defconfig +++ b/configs/k2e_evm_defconfig @@ -2,5 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_KEYSTONE=y CONFIG_TARGET_K2E_EVM=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/k2hk_evm_defconfig b/configs/k2hk_evm_defconfig index 53e7db8..297183f 100644 --- a/configs/k2hk_evm_defconfig +++ b/configs/k2hk_evm_defconfig @@ -2,5 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_KEYSTONE=y CONFIG_TARGET_K2HK_EVM=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/k2l_evm_defconfig b/configs/k2l_evm_defconfig index ef688dd..7aa538d 100644 --- a/configs/k2l_evm_defconfig +++ b/configs/k2l_evm_defconfig @@ -2,5 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_KEYSTONE=y CONFIG_TARGET_K2L_EVM=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/katmai_defconfig b/configs/katmai_defconfig index 7821e19..8492314 100644 --- a/configs/katmai_defconfig +++ b/configs/katmai_defconfig @@ -1,5 +1,3 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_KATMAI=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/kilauea_defconfig b/configs/kilauea_defconfig index 2ef0f56..0054cc6 100644 --- a/configs/kilauea_defconfig +++ b/configs/kilauea_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_KILAUEA=y CONFIG_SYS_EXTRA_OPTIONS="KILAUEA" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/km_kirkwood_128m16_defconfig b/configs/km_kirkwood_128m16_defconfig index 25cd351..b903f6e 100644 --- a/configs/km_kirkwood_128m16_defconfig +++ b/configs/km_kirkwood_128m16_defconfig @@ -2,6 +2,6 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_KM_KIRKWOOD=y CONFIG_SYS_EXTRA_OPTIONS="KM_KIRKWOOD_128M16" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/km_kirkwood_defconfig b/configs/km_kirkwood_defconfig index 0a5c545..7fc1112 100644 --- a/configs/km_kirkwood_defconfig +++ b/configs/km_kirkwood_defconfig @@ -2,6 +2,6 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_KM_KIRKWOOD=y CONFIG_SYS_EXTRA_OPTIONS="KM_KIRKWOOD" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/km_kirkwood_pci_defconfig b/configs/km_kirkwood_pci_defconfig index 81b45ad..a310fb7 100644 --- a/configs/km_kirkwood_pci_defconfig +++ b/configs/km_kirkwood_pci_defconfig @@ -2,6 +2,6 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_KM_KIRKWOOD=y CONFIG_SYS_EXTRA_OPTIONS="KM_KIRKWOOD_PCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/kmcoge4_defconfig b/configs/kmcoge4_defconfig index 4877a2d..aa0e004 100644 --- a/configs/kmcoge4_defconfig +++ b/configs/kmcoge4_defconfig @@ -2,6 +2,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_KMP204X=y CONFIG_SYS_EXTRA_OPTIONS="KMCOGE4" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/kmcoge5ne_defconfig b/configs/kmcoge5ne_defconfig index bd7b8f9..a8b5275 100644 --- a/configs/kmcoge5ne_defconfig +++ b/configs/kmcoge5ne_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_KM8360=y CONFIG_SYS_EXTRA_OPTIONS="KMCOGE5NE" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/kmcoge5un_defconfig b/configs/kmcoge5un_defconfig index 610dac8..95c61f1 100644 --- a/configs/kmcoge5un_defconfig +++ b/configs/kmcoge5un_defconfig @@ -2,6 +2,6 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_KM_KIRKWOOD=y CONFIG_SYS_EXTRA_OPTIONS="KM_COGE5UN" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/kmeter1_defconfig b/configs/kmeter1_defconfig index 2b04d33..3374ab0 100644 --- a/configs/kmeter1_defconfig +++ b/configs/kmeter1_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_KM8360=y CONFIG_SYS_EXTRA_OPTIONS="KMETER1" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/kmlion1_defconfig b/configs/kmlion1_defconfig index e230ad5..48fe188 100644 --- a/configs/kmlion1_defconfig +++ b/configs/kmlion1_defconfig @@ -2,6 +2,6 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_KMP204X=y CONFIG_SYS_EXTRA_OPTIONS="KMLION1" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/kmnusa_defconfig b/configs/kmnusa_defconfig index bf4a5ea..158fe39 100644 --- a/configs/kmnusa_defconfig +++ b/configs/kmnusa_defconfig @@ -2,6 +2,6 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_KM_KIRKWOOD=y CONFIG_SYS_EXTRA_OPTIONS="KM_NUSA" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/kmopti2_defconfig b/configs/kmopti2_defconfig index d24e147..11c53b5 100644 --- a/configs/kmopti2_defconfig +++ b/configs/kmopti2_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_TUXX1=y CONFIG_SYS_EXTRA_OPTIONS="KMOPTI2" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/kmsugp1_defconfig b/configs/kmsugp1_defconfig index ff20e9d..d754ac0 100644 --- a/configs/kmsugp1_defconfig +++ b/configs/kmsugp1_defconfig @@ -2,6 +2,6 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_KM_KIRKWOOD=y CONFIG_SYS_EXTRA_OPTIONS="KM_SUGP1" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/kmsupx5_defconfig b/configs/kmsupx5_defconfig index 78c19fb..fd4bb9a 100644 --- a/configs/kmsupx5_defconfig +++ b/configs/kmsupx5_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_TUXX1=y CONFIG_SYS_EXTRA_OPTIONS="KMSUPX5" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/kmsuv31_defconfig b/configs/kmsuv31_defconfig index 7701e63..5f56925 100644 --- a/configs/kmsuv31_defconfig +++ b/configs/kmsuv31_defconfig @@ -2,6 +2,6 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_KM_KIRKWOOD=y CONFIG_SYS_EXTRA_OPTIONS="KM_SUV31" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/kmvect1_defconfig b/configs/kmvect1_defconfig index de74080..512d12c 100644 --- a/configs/kmvect1_defconfig +++ b/configs/kmvect1_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_SUVD3=y CONFIG_SYS_EXTRA_OPTIONS="KMVECT1" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/koelsch_defconfig b/configs/koelsch_defconfig index 40dea22..13c8310 100644 --- a/configs/koelsch_defconfig +++ b/configs/koelsch_defconfig @@ -1,6 +1,20 @@ CONFIG_ARM=y CONFIG_RMOBILE=y CONFIG_TARGET_KOELSCH=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set CONFIG_SPI_FLASH=y CONFIG_SH_SDHI=y diff --git a/configs/kwb_defconfig b/configs/kwb_defconfig index 9b07084..5bca811 100644 --- a/configs/kwb_defconfig +++ b/configs/kwb_defconfig @@ -2,5 +2,15 @@ CONFIG_ARM=y CONFIG_TARGET_KWB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set # CONFIG_CMD_CRC32 is not set -CONFIG_CMD_NET=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/kzm9g_defconfig b/configs/kzm9g_defconfig index 91a0437..3df79d4 100644 --- a/configs/kzm9g_defconfig +++ b/configs/kzm9g_defconfig @@ -1,4 +1,4 @@ CONFIG_ARM=y CONFIG_RMOBILE=y CONFIG_TARGET_KZM9G=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/lager_defconfig b/configs/lager_defconfig index 1ee1070..3805fcb 100644 --- a/configs/lager_defconfig +++ b/configs/lager_defconfig @@ -1,6 +1,20 @@ CONFIG_ARM=y CONFIG_RMOBILE=y CONFIG_TARGET_LAGER=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set CONFIG_SPI_FLASH=y CONFIG_SH_SDHI=y diff --git a/configs/lcd4_lwmon5_defconfig b/configs/lcd4_lwmon5_defconfig index 786b458..b911dbd 100644 --- a/configs/lcd4_lwmon5_defconfig +++ b/configs/lcd4_lwmon5_defconfig @@ -3,4 +3,4 @@ CONFIG_4xx=y CONFIG_TARGET_LWMON5=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="LCD4_LWMON5" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/lp8x4x_defconfig b/configs/lp8x4x_defconfig index af02d37..63bbcca 100644 --- a/configs/lp8x4x_defconfig +++ b/configs/lp8x4x_defconfig @@ -1,3 +1,4 @@ CONFIG_ARM=y CONFIG_TARGET_LP8X4X=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/ls1021aqds_ddr4_nor_defconfig b/configs/ls1021aqds_ddr4_nor_defconfig index 8d78c7f..8c6a5c4 100644 --- a/configs/ls1021aqds_ddr4_nor_defconfig +++ b/configs/ls1021aqds_ddr4_nor_defconfig @@ -1,4 +1,4 @@ CONFIG_ARM=y CONFIG_TARGET_LS1021AQDS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig index 1d76b65..efcef64 100644 --- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig +++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig @@ -1,4 +1,4 @@ CONFIG_ARM=y CONFIG_TARGET_LS1021AQDS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,LPUART" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/ls1021aqds_nand_defconfig b/configs/ls1021aqds_nand_defconfig index b5b77b9..d3a12b1 100644 --- a/configs/ls1021aqds_nand_defconfig +++ b/configs/ls1021aqds_nand_defconfig @@ -2,4 +2,4 @@ CONFIG_ARM=y CONFIG_TARGET_LS1021AQDS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig index 6f1b602..045878f 100644 --- a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig +++ b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig @@ -1,4 +1,4 @@ CONFIG_ARM=y CONFIG_TARGET_LS1021AQDS=y CONFIG_SYS_EXTRA_OPTIONS="SECURE_BOOT" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/ls1021aqds_nor_defconfig b/configs/ls1021aqds_nor_defconfig index 6c7ea6f..f28cfb3 100644 --- a/configs/ls1021aqds_nor_defconfig +++ b/configs/ls1021aqds_nor_defconfig @@ -1,3 +1,3 @@ CONFIG_ARM=y CONFIG_TARGET_LS1021AQDS=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/ls1021aqds_nor_lpuart_defconfig b/configs/ls1021aqds_nor_lpuart_defconfig index e586215..081e618 100644 --- a/configs/ls1021aqds_nor_lpuart_defconfig +++ b/configs/ls1021aqds_nor_lpuart_defconfig @@ -1,4 +1,4 @@ CONFIG_ARM=y CONFIG_TARGET_LS1021AQDS=y CONFIG_SYS_EXTRA_OPTIONS="LPUART" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/ls1021aqds_qspi_defconfig b/configs/ls1021aqds_qspi_defconfig index 3cadd7c..1db9129 100644 --- a/configs/ls1021aqds_qspi_defconfig +++ b/configs/ls1021aqds_qspi_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_LS1021AQDS=y CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/ls1021aqds_sdcard_defconfig b/configs/ls1021aqds_sdcard_defconfig index d131834..e1b4854 100644 --- a/configs/ls1021aqds_sdcard_defconfig +++ b/configs/ls1021aqds_sdcard_defconfig @@ -2,4 +2,4 @@ CONFIG_ARM=y CONFIG_TARGET_LS1021AQDS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig index 867f3d3..f51f2fd 100644 --- a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig +++ b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig @@ -1,4 +1,4 @@ CONFIG_ARM=y CONFIG_TARGET_LS1021ATWR=y CONFIG_SYS_EXTRA_OPTIONS="SECURE_BOOT" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/ls1021atwr_nor_defconfig b/configs/ls1021atwr_nor_defconfig index 3b31375..939be78 100644 --- a/configs/ls1021atwr_nor_defconfig +++ b/configs/ls1021atwr_nor_defconfig @@ -1,3 +1,3 @@ CONFIG_ARM=y CONFIG_TARGET_LS1021ATWR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/ls1021atwr_nor_lpuart_defconfig b/configs/ls1021atwr_nor_lpuart_defconfig index 4cfda5f..8f34613 100644 --- a/configs/ls1021atwr_nor_lpuart_defconfig +++ b/configs/ls1021atwr_nor_lpuart_defconfig @@ -1,4 +1,4 @@ CONFIG_ARM=y CONFIG_TARGET_LS1021ATWR=y CONFIG_SYS_EXTRA_OPTIONS="LPUART" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/ls1021atwr_qspi_defconfig b/configs/ls1021atwr_qspi_defconfig index a3e9e66..9eb88b3 100644 --- a/configs/ls1021atwr_qspi_defconfig +++ b/configs/ls1021atwr_qspi_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_LS1021ATWR=y CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/ls1021atwr_sdcard_defconfig b/configs/ls1021atwr_sdcard_defconfig index 769f7f5..cfc7b524 100644 --- a/configs/ls1021atwr_sdcard_defconfig +++ b/configs/ls1021atwr_sdcard_defconfig @@ -2,4 +2,4 @@ CONFIG_ARM=y CONFIG_TARGET_LS1021ATWR=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/ls2085a_emu_D4_defconfig b/configs/ls2085a_emu_D4_defconfig index f0e9c59..9c82e17 100644 --- a/configs/ls2085a_emu_D4_defconfig +++ b/configs/ls2085a_emu_D4_defconfig @@ -1,4 +1,14 @@ CONFIG_ARM=y CONFIG_TARGET_LS2085A_EMU=y CONFIG_SYS_EXTRA_OPTIONS="EMU,SYS_FSL_DDR4" -CONFIG_CMD_NET=y +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set diff --git a/configs/ls2085a_emu_defconfig b/configs/ls2085a_emu_defconfig index 27c58a7..fa4a44e 100644 --- a/configs/ls2085a_emu_defconfig +++ b/configs/ls2085a_emu_defconfig @@ -1,4 +1,14 @@ CONFIG_ARM=y CONFIG_TARGET_LS2085A_EMU=y CONFIG_SYS_EXTRA_OPTIONS="EMU" -CONFIG_CMD_NET=y +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set diff --git a/configs/ls2085a_simu_defconfig b/configs/ls2085a_simu_defconfig index b3d861b..de9776d 100644 --- a/configs/ls2085a_simu_defconfig +++ b/configs/ls2085a_simu_defconfig @@ -1,4 +1,14 @@ CONFIG_ARM=y CONFIG_TARGET_LS2085A_SIMU=y CONFIG_SYS_EXTRA_OPTIONS="SIMU" -CONFIG_CMD_NET=y +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set diff --git a/configs/ls2085aqds_defconfig b/configs/ls2085aqds_defconfig index 9dacd21..fd208b18 100644 --- a/configs/ls2085aqds_defconfig +++ b/configs/ls2085aqds_defconfig @@ -1,4 +1,4 @@ CONFIG_ARM=y CONFIG_TARGET_LS2085AQDS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/ls2085aqds_nand_defconfig b/configs/ls2085aqds_nand_defconfig index fb123bd..b9dd651 100644 --- a/configs/ls2085aqds_nand_defconfig +++ b/configs/ls2085aqds_nand_defconfig @@ -2,4 +2,4 @@ CONFIG_ARM=y CONFIG_TARGET_LS2085AQDS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,NAND" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/ls2085ardb_defconfig b/configs/ls2085ardb_defconfig index 0e3c518..308e935 100644 --- a/configs/ls2085ardb_defconfig +++ b/configs/ls2085ardb_defconfig @@ -1,4 +1,4 @@ CONFIG_ARM=y CONFIG_TARGET_LS2085ARDB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/ls2085ardb_nand_defconfig b/configs/ls2085ardb_nand_defconfig index 02747ae..8539307 100644 --- a/configs/ls2085ardb_nand_defconfig +++ b/configs/ls2085ardb_nand_defconfig @@ -2,4 +2,4 @@ CONFIG_ARM=y CONFIG_TARGET_LS2085ARDB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,NAND" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/lschlv2_defconfig b/configs/lschlv2_defconfig index 8cd8282..a086de8 100644 --- a/configs/lschlv2_defconfig +++ b/configs/lschlv2_defconfig @@ -2,6 +2,8 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_LSXL=y CONFIG_SYS_EXTRA_OPTIONS="LSCHLV2" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPI_FLASH=y diff --git a/configs/lsxhl_defconfig b/configs/lsxhl_defconfig index 8847109..7d48abd 100644 --- a/configs/lsxhl_defconfig +++ b/configs/lsxhl_defconfig @@ -2,6 +2,8 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_LSXL=y CONFIG_SYS_EXTRA_OPTIONS="LSXHL" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPI_FLASH=y diff --git a/configs/luan_defconfig b/configs/luan_defconfig index 82c9b3a..d42b4a9 100644 --- a/configs/luan_defconfig +++ b/configs/luan_defconfig @@ -1,5 +1,3 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_LUAN=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/lwmon5_defconfig b/configs/lwmon5_defconfig index e65a8d5..0a6da68 100644 --- a/configs/lwmon5_defconfig +++ b/configs/lwmon5_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_LWMON5=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/m28evk_defconfig b/configs/m28evk_defconfig index fb681af..03ced33 100644 --- a/configs/m28evk_defconfig +++ b/configs/m28evk_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_M28EVK=y CONFIG_SPL=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/m53evk_defconfig b/configs/m53evk_defconfig index 0a40f18..b5e72ef 100644 --- a/configs/m53evk_defconfig +++ b/configs/m53evk_defconfig @@ -2,5 +2,5 @@ CONFIG_ARM=y CONFIG_TARGET_M53EVK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/denx/m53evk/imximage.cfg" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set diff --git a/configs/magnesium_defconfig b/configs/magnesium_defconfig index 4969603..2fa6589 100644 --- a/configs/magnesium_defconfig +++ b/configs/magnesium_defconfig @@ -1,3 +1,3 @@ CONFIG_ARM=y CONFIG_TARGET_MAGNESIUM=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/makalu_defconfig b/configs/makalu_defconfig index 094ff47..ed9b82d 100644 --- a/configs/makalu_defconfig +++ b/configs/makalu_defconfig @@ -1,5 +1,3 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_MAKALU=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/malta_defconfig b/configs/malta_defconfig index 4f0c483..3056c48 100644 --- a/configs/malta_defconfig +++ b/configs/malta_defconfig @@ -1,4 +1,8 @@ CONFIG_MIPS=y CONFIG_TARGET_MALTA=y -CONFIG_CMD_NET=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/maltael_defconfig b/configs/maltael_defconfig index ac835f8..858a852 100644 --- a/configs/maltael_defconfig +++ b/configs/maltael_defconfig @@ -1,5 +1,9 @@ CONFIG_MIPS=y CONFIG_TARGET_MALTA=y CONFIG_SYS_LITTLE_ENDIAN=y -CONFIG_CMD_NET=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/marsboard_defconfig b/configs/marsboard_defconfig index 48df76b..5ea278f 100644 --- a/configs/marsboard_defconfig +++ b/configs/marsboard_defconfig @@ -1,8 +1,8 @@ CONFIG_ARM=y CONFIG_TARGET_EMBESTMX6BOARDS=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024,ENV_IS_IN_SPI_FLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_DM=y CONFIG_SPI_FLASH=y CONFIG_DM_THERMAL=y diff --git a/configs/maxbcm_defconfig b/configs/maxbcm_defconfig index b60faa1..c5b3b67 100644 --- a/configs/maxbcm_defconfig +++ b/configs/maxbcm_defconfig @@ -1,5 +1,7 @@ CONFIG_ARM=y CONFIG_TARGET_MAXBCM=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/mcx_defconfig b/configs/mcx_defconfig index 28d1953..1d3e978 100644 --- a/configs/mcx_defconfig +++ b/configs/mcx_defconfig @@ -2,4 +2,8 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_MCX=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/mecp5123_defconfig b/configs/mecp5123_defconfig index 55ac810..1957f0b 100644 --- a/configs/mecp5123_defconfig +++ b/configs/mecp5123_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC512X=y CONFIG_TARGET_MECP5123=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/medcom-wide_defconfig b/configs/medcom-wide_defconfig index a785980..bb33542 100644 --- a/configs/medcom-wide_defconfig +++ b/configs/medcom-wide_defconfig @@ -3,7 +3,12 @@ CONFIG_TEGRA=y CONFIG_TEGRA20=y CONFIG_TARGET_MEDCOM_WIDE=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-medcom-wide" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_SPL_DM=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/meesc_dataflash_defconfig b/configs/meesc_dataflash_defconfig index 4db6744..e4f7cce 100644 --- a/configs/meesc_dataflash_defconfig +++ b/configs/meesc_dataflash_defconfig @@ -2,4 +2,8 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_MEESC=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/meesc_defconfig b/configs/meesc_defconfig index 0f4dbb0..7d1fe7b 100644 --- a/configs/meesc_defconfig +++ b/configs/meesc_defconfig @@ -2,4 +2,8 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_MEESC=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_NANDFLASH" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/mgcoge3ne_defconfig b/configs/mgcoge3ne_defconfig index 4acfa5f..7b795f5 100644 --- a/configs/mgcoge3ne_defconfig +++ b/configs/mgcoge3ne_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_MPC8260=y CONFIG_TARGET_KM82XX=y CONFIG_SYS_EXTRA_OPTIONS="MGCOGE3NE" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/mgcoge3un_defconfig b/configs/mgcoge3un_defconfig index 7b5fb93..cd5f358 100644 --- a/configs/mgcoge3un_defconfig +++ b/configs/mgcoge3un_defconfig @@ -2,6 +2,6 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_KM_KIRKWOOD=y CONFIG_SYS_EXTRA_OPTIONS="KM_MGCOGE3UN" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/mgcoge_defconfig b/configs/mgcoge_defconfig index 13d56b9..1fb8dfd 100644 --- a/configs/mgcoge_defconfig +++ b/configs/mgcoge_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_MPC8260=y CONFIG_TARGET_KM82XX=y CONFIG_SYS_EXTRA_OPTIONS="MGCOGE" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig index 1e4cf7b..8355c67 100644 --- a/configs/microblaze-generic_defconfig +++ b/configs/microblaze-generic_defconfig @@ -2,7 +2,7 @@ CONFIG_MICROBLAZE=y CONFIG_TARGET_MICROBLAZE_GENERIC=y CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic" CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_OF_EMBED=y diff --git a/configs/minnowmax_defconfig b/configs/minnowmax_defconfig index c5c1f38..e0a9216 100644 --- a/configs/minnowmax_defconfig +++ b/configs/minnowmax_defconfig @@ -6,7 +6,10 @@ CONFIG_HAVE_INTEL_ME=y CONFIG_SMP=y CONFIG_GENERATE_SFI_TABLE=y CONFIG_CMD_CPU=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y CONFIG_CMD_BOOTSTAGE=y diff --git a/configs/mixtile_loftq_defconfig b/configs/mixtile_loftq_defconfig index f940bf1..a8c497c 100644 --- a/configs/mixtile_loftq_defconfig +++ b/configs/mixtile_loftq_defconfig @@ -9,10 +9,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mixtile-loftq" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y CONFIG_DM_SERIAL=y CONFIG_AXP221_ALDO1_VOLT=3300 diff --git a/configs/mk802_a10s_defconfig b/configs/mk802_a10s_defconfig index 36ad5bb..dc78fa4 100644 --- a/configs/mk802_a10s_defconfig +++ b/configs/mk802_a10s_defconfig @@ -8,10 +8,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-mk802" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/mk802_defconfig b/configs/mk802_defconfig index a4f1b0b..31bde00 100644 --- a/configs/mk802_defconfig +++ b/configs/mk802_defconfig @@ -6,10 +6,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/mk802ii_defconfig b/configs/mk802ii_defconfig index 641aa55..ffa7891 100644 --- a/configs/mk802ii_defconfig +++ b/configs/mk802ii_defconfig @@ -5,10 +5,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802ii" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/ml507_defconfig b/configs/ml507_defconfig index cbd37b3..3f66c86 100644 --- a/configs/ml507_defconfig +++ b/configs/ml507_defconfig @@ -2,3 +2,7 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_ML507=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1,INIT_TLB=board/xilinx/ppc440-generic/init.o" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/ml507_flash_defconfig b/configs/ml507_flash_defconfig index fba47ef..442e0ce 100644 --- a/configs/ml507_flash_defconfig +++ b/configs/ml507_flash_defconfig @@ -2,3 +2,7 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_ML507=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC,INIT_TLB=board/xilinx/ppc440-generic/init.o" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/motionpro_defconfig b/configs/motionpro_defconfig index 61ffee9..4d3f909 100644 --- a/configs/motionpro_defconfig +++ b/configs/motionpro_defconfig @@ -4,4 +4,4 @@ CONFIG_TARGET_MOTIONPRO=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/mpc5121ads_defconfig b/configs/mpc5121ads_defconfig index c9ce78c..e5fe27f 100644 --- a/configs/mpc5121ads_defconfig +++ b/configs/mpc5121ads_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC512X=y CONFIG_TARGET_MPC5121ADS=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/mpc5121ads_rev2_defconfig b/configs/mpc5121ads_rev2_defconfig index b9cbb3b..3562353 100644 --- a/configs/mpc5121ads_rev2_defconfig +++ b/configs/mpc5121ads_rev2_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC512X=y CONFIG_TARGET_MPC5121ADS=y CONFIG_SYS_EXTRA_OPTIONS="MPC5121ADS_REV2" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/mpc8308_p1m_defconfig b/configs/mpc8308_p1m_defconfig index f0b2bc4..8c67eab 100644 --- a/configs/mpc8308_p1m_defconfig +++ b/configs/mpc8308_p1m_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC8308_P1M=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/mpr2_defconfig b/configs/mpr2_defconfig index f242419..6a832c7 100644 --- a/configs/mpr2_defconfig +++ b/configs/mpr2_defconfig @@ -1,3 +1,22 @@ CONFIG_SH=y CONFIG_TARGET_MPR2=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/ms7720se_defconfig b/configs/ms7720se_defconfig index 58bc947..55d480a 100644 --- a/configs/ms7720se_defconfig +++ b/configs/ms7720se_defconfig @@ -1,3 +1,22 @@ CONFIG_SH=y CONFIG_TARGET_MS7720SE=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/ms7722se_defconfig b/configs/ms7722se_defconfig index 59ea708..911f3dc 100644 --- a/configs/ms7722se_defconfig +++ b/configs/ms7722se_defconfig @@ -1,4 +1,20 @@ CONFIG_SH=y CONFIG_TARGET_MS7722SE=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/ms7750se_defconfig b/configs/ms7750se_defconfig index 0a805b5..fb7932a 100644 --- a/configs/ms7750se_defconfig +++ b/configs/ms7750se_defconfig @@ -1,3 +1,23 @@ CONFIG_SH=y CONFIG_TARGET_MS7750SE=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_MEMORY is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/mt_ventoux_defconfig b/configs/mt_ventoux_defconfig index 2f078c4..0a6b7d6 100644 --- a/configs/mt_ventoux_defconfig +++ b/configs/mt_ventoux_defconfig @@ -2,4 +2,6 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_MT_VENTOUX=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/munices_defconfig b/configs/munices_defconfig index a64b3e8..1c0309a 100644 --- a/configs/munices_defconfig +++ b/configs/munices_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_MUNICES=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/mv88f6281gtw_ge_defconfig b/configs/mv88f6281gtw_ge_defconfig index 41e8931..8988734 100644 --- a/configs/mv88f6281gtw_ge_defconfig +++ b/configs/mv88f6281gtw_ge_defconfig @@ -1,5 +1,7 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_MV88F6281GTW_GE=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/mx23_olinuxino_defconfig b/configs/mx23_olinuxino_defconfig index 7103e30..9e02334 100644 --- a/configs/mx23_olinuxino_defconfig +++ b/configs/mx23_olinuxino_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_MX23_OLINUXINO=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/mx23evk_defconfig b/configs/mx23evk_defconfig index c386bba..2f4b91b 100644 --- a/configs/mx23evk_defconfig +++ b/configs/mx23evk_defconfig @@ -1,3 +1,8 @@ CONFIG_ARM=y CONFIG_TARGET_MX23EVK=y CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/mx25pdk_defconfig b/configs/mx25pdk_defconfig index cf55b9f..79edf33 100644 --- a/configs/mx25pdk_defconfig +++ b/configs/mx25pdk_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_MX25PDK=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx25pdk/imximage.cfg" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/mx28evk_auart_console_defconfig b/configs/mx28evk_auart_console_defconfig index 7753967..9000787 100644 --- a/configs/mx28evk_auart_console_defconfig +++ b/configs/mx28evk_auart_console_defconfig @@ -2,6 +2,6 @@ CONFIG_ARM=y CONFIG_TARGET_MX28EVK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="MXS_AUART,MXS_AUART_BASE=MXS_UARTAPP3_BASE,ENV_IS_IN_MMC" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/mx28evk_defconfig b/configs/mx28evk_defconfig index 55ea267..6d3cbb8 100644 --- a/configs/mx28evk_defconfig +++ b/configs/mx28evk_defconfig @@ -2,6 +2,6 @@ CONFIG_ARM=y CONFIG_TARGET_MX28EVK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="ENV_IS_IN_MMC" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/mx28evk_nand_defconfig b/configs/mx28evk_nand_defconfig index ed6137c..ee4536d 100644 --- a/configs/mx28evk_nand_defconfig +++ b/configs/mx28evk_nand_defconfig @@ -2,6 +2,6 @@ CONFIG_ARM=y CONFIG_TARGET_MX28EVK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="ENV_IS_IN_NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/mx28evk_spi_defconfig b/configs/mx28evk_spi_defconfig index 2fe16e3..88bfb43 100644 --- a/configs/mx28evk_spi_defconfig +++ b/configs/mx28evk_spi_defconfig @@ -2,6 +2,6 @@ CONFIG_ARM=y CONFIG_TARGET_MX28EVK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="ENV_IS_IN_SPI_FLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/mx31ads_defconfig b/configs/mx31ads_defconfig index 096028c..20cadde 100644 --- a/configs/mx31ads_defconfig +++ b/configs/mx31ads_defconfig @@ -1,3 +1,3 @@ CONFIG_ARM=y CONFIG_TARGET_MX31ADS=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/mx31pdk_defconfig b/configs/mx31pdk_defconfig index 7f35233..dd6a7b9 100644 --- a/configs/mx31pdk_defconfig +++ b/configs/mx31pdk_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y CONFIG_TARGET_MX31PDK=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/mx35pdk_defconfig b/configs/mx35pdk_defconfig index 992cd1d..c13e9f2 100644 --- a/configs/mx35pdk_defconfig +++ b/configs/mx35pdk_defconfig @@ -1,3 +1,3 @@ CONFIG_ARM=y CONFIG_TARGET_MX35PDK=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/mx51_efikamx_defconfig b/configs/mx51_efikamx_defconfig index 3f89bee..9c0deb1 100644 --- a/configs/mx51_efikamx_defconfig +++ b/configs/mx51_efikamx_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_MX51_EFIKAMX=y CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/mx51_efikasb_defconfig b/configs/mx51_efikasb_defconfig index 662aad4..1bc7c00 100644 --- a/configs/mx51_efikasb_defconfig +++ b/configs/mx51_efikasb_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_MX51_EFIKAMX=y CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/mx51evk_defconfig b/configs/mx51evk_defconfig index e208a44..f2c3743 100644 --- a/configs/mx51evk_defconfig +++ b/configs/mx51evk_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y CONFIG_TARGET_MX51EVK=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx51evk/imximage.cfg" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/mx53ard_defconfig b/configs/mx53ard_defconfig index 85fbaf6..8f233c9 100644 --- a/configs/mx53ard_defconfig +++ b/configs/mx53ard_defconfig @@ -1,5 +1,4 @@ CONFIG_ARM=y CONFIG_TARGET_MX53ARD=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx53ard/imximage_dd3.cfg" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set diff --git a/configs/mx53evk_defconfig b/configs/mx53evk_defconfig index fa07df4..958a7d8 100644 --- a/configs/mx53evk_defconfig +++ b/configs/mx53evk_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y CONFIG_TARGET_MX53EVK=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx53evk/imximage.cfg" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/mx53loco_defconfig b/configs/mx53loco_defconfig index e23fce8..1badd4e 100644 --- a/configs/mx53loco_defconfig +++ b/configs/mx53loco_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y CONFIG_TARGET_MX53LOCO=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx53loco/imximage.cfg" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/mx53smd_defconfig b/configs/mx53smd_defconfig index 9707964..2fdd374 100644 --- a/configs/mx53smd_defconfig +++ b/configs/mx53smd_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y CONFIG_TARGET_MX53SMD=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx53smd/imximage.cfg" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/mx6cuboxi_defconfig b/configs/mx6cuboxi_defconfig index 12899d6..27fe22e 100644 --- a/configs/mx6cuboxi_defconfig +++ b/configs/mx6cuboxi_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_TARGET_MX6CUBOXI=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_DM=y CONFIG_DM_THERMAL=y diff --git a/configs/mx6dlarm2_defconfig b/configs/mx6dlarm2_defconfig index 4324ccf..6c1ba33 100644 --- a/configs/mx6dlarm2_defconfig +++ b/configs/mx6dlarm2_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_MX6QARM2=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage_mx6dl.cfg,MX6DL,DDR_MB=2048" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/mx6dlarm2_lpddr2_defconfig b/configs/mx6dlarm2_lpddr2_defconfig index 7681814..4624a09 100644 --- a/configs/mx6dlarm2_lpddr2_defconfig +++ b/configs/mx6dlarm2_lpddr2_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_MX6QARM2=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage_mx6dl.cfg,MX6DL,MX6DL_LPDDR2,DDR_MB=512" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/mx6dlsabreauto_defconfig b/configs/mx6dlsabreauto_defconfig index 92c1db4..756e5db 100644 --- a/configs/mx6dlsabreauto_defconfig +++ b/configs/mx6dlsabreauto_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_MX6QSABREAUTO=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6DL" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/mx6dlsabresd_defconfig b/configs/mx6dlsabresd_defconfig index 5a5a8e0..de99998 100644 --- a/configs/mx6dlsabresd_defconfig +++ b/configs/mx6dlsabresd_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_MX6SABRESD=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6dlsabresd.cfg,MX6DL" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/mx6qarm2_defconfig b/configs/mx6qarm2_defconfig index 51ab7e3..42dbded 100644 --- a/configs/mx6qarm2_defconfig +++ b/configs/mx6qarm2_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_MX6QARM2=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg,MX6Q,DDR_MB=2048" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/mx6qarm2_lpddr2_defconfig b/configs/mx6qarm2_lpddr2_defconfig index c590c39..5f9105f 100644 --- a/configs/mx6qarm2_lpddr2_defconfig +++ b/configs/mx6qarm2_lpddr2_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_MX6QARM2=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg,MX6Q,MX6DQ_LPDDR2,DDR_MB=512" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/mx6qsabreauto_defconfig b/configs/mx6qsabreauto_defconfig index df85271..9343bcc 100644 --- a/configs/mx6qsabreauto_defconfig +++ b/configs/mx6qsabreauto_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_MX6QSABREAUTO=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/mx6qsabrelite_defconfig b/configs/mx6qsabrelite_defconfig index e544337..427fbee 100644 --- a/configs/mx6qsabrelite_defconfig +++ b/configs/mx6qsabrelite_defconfig @@ -1,8 +1,8 @@ CONFIG_ARM=y CONFIG_TARGET_NITROGEN6X=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024,SABRELITE" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_DM=y CONFIG_SPI_FLASH=y CONFIG_DM_THERMAL=y diff --git a/configs/mx6qsabresd_defconfig b/configs/mx6qsabresd_defconfig index 1508e26..732c1dc 100644 --- a/configs/mx6qsabresd_defconfig +++ b/configs/mx6qsabresd_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_MX6SABRESD=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg,MX6Q" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/mx6sabresd_spl_defconfig b/configs/mx6sabresd_spl_defconfig index 1f573cd..d93a40d 100644 --- a/configs/mx6sabresd_spl_defconfig +++ b/configs/mx6sabresd_spl_defconfig @@ -2,6 +2,6 @@ CONFIG_ARM=y CONFIG_TARGET_MX6SABRESD=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6Q" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/mx6slevk_defconfig b/configs/mx6slevk_defconfig index ccb6e2a..dcc3296 100644 --- a/configs/mx6slevk_defconfig +++ b/configs/mx6slevk_defconfig @@ -1,7 +1,9 @@ CONFIG_ARM=y CONFIG_TARGET_MX6SLEVK=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_DM=y CONFIG_SPI_FLASH=y CONFIG_DM_THERMAL=y diff --git a/configs/mx6slevk_spinor_defconfig b/configs/mx6slevk_spinor_defconfig index 912b162..964a147 100644 --- a/configs/mx6slevk_spinor_defconfig +++ b/configs/mx6slevk_spinor_defconfig @@ -1,7 +1,9 @@ CONFIG_ARM=y CONFIG_TARGET_MX6SLEVK=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL,SYS_BOOT_SPINOR" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_DM=y CONFIG_SPI_FLASH=y CONFIG_DM_THERMAL=y diff --git a/configs/mx6sxsabresd_defconfig b/configs/mx6sxsabresd_defconfig index 4766530..e355ba5 100644 --- a/configs/mx6sxsabresd_defconfig +++ b/configs/mx6sxsabresd_defconfig @@ -1,5 +1,7 @@ CONFIG_ARM=y CONFIG_TARGET_MX6SXSABRESD=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg,MX6SX" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/mx6sxsabresd_spl_defconfig b/configs/mx6sxsabresd_spl_defconfig index e499a0a..df34894 100644 --- a/configs/mx6sxsabresd_spl_defconfig +++ b/configs/mx6sxsabresd_spl_defconfig @@ -2,5 +2,7 @@ CONFIG_ARM=y CONFIG_TARGET_MX6SXSABRESD=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6SX" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/nas220_defconfig b/configs/nas220_defconfig index 17a64c7..47e5911 100644 --- a/configs/nas220_defconfig +++ b/configs/nas220_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_NAS220=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/neo_defconfig b/configs/neo_defconfig index 094a53d..77eefe9 100644 --- a/configs/neo_defconfig +++ b/configs/neo_defconfig @@ -1,5 +1,4 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_NEO=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_NFS is not set diff --git a/configs/net2big_v2_defconfig b/configs/net2big_v2_defconfig index 03aa0bf..09df520 100644 --- a/configs/net2big_v2_defconfig +++ b/configs/net2big_v2_defconfig @@ -2,5 +2,7 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_NET2BIG_V2=y CONFIG_SYS_EXTRA_OPTIONS="NET2BIG_V2" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/netspace_lite_v2_defconfig b/configs/netspace_lite_v2_defconfig index 7777c40..862a9ae 100644 --- a/configs/netspace_lite_v2_defconfig +++ b/configs/netspace_lite_v2_defconfig @@ -2,5 +2,7 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_NETSPACE_V2=y CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_LITE_V2" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/netspace_max_v2_defconfig b/configs/netspace_max_v2_defconfig index c2052ed..1829995 100644 --- a/configs/netspace_max_v2_defconfig +++ b/configs/netspace_max_v2_defconfig @@ -2,5 +2,7 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_NETSPACE_V2=y CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_MAX_V2" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/netspace_mini_v2_defconfig b/configs/netspace_mini_v2_defconfig index 6508f3d..35cb154 100644 --- a/configs/netspace_mini_v2_defconfig +++ b/configs/netspace_mini_v2_defconfig @@ -2,5 +2,7 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_NETSPACE_V2=y CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_MINI_V2" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/netspace_v2_defconfig b/configs/netspace_v2_defconfig index 4cb15b9..a13452b 100644 --- a/configs/netspace_v2_defconfig +++ b/configs/netspace_v2_defconfig @@ -2,5 +2,7 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_NETSPACE_V2=y CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_V2" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/nhk8815_defconfig b/configs/nhk8815_defconfig index 3d46043..f9fac6f 100644 --- a/configs/nhk8815_defconfig +++ b/configs/nhk8815_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_NOMADIK=y CONFIG_NOMADIK_NHK8815=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/nhk8815_onenand_defconfig b/configs/nhk8815_onenand_defconfig index 7cc957f..c01559d 100644 --- a/configs/nhk8815_onenand_defconfig +++ b/configs/nhk8815_onenand_defconfig @@ -2,4 +2,6 @@ CONFIG_ARM=y CONFIG_ARCH_NOMADIK=y CONFIG_NOMADIK_NHK8815=y CONFIG_SYS_EXTRA_OPTIONS="BOOT_ONENAND" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/nios2-generic_defconfig b/configs/nios2-generic_defconfig index 4ff0611..573a084 100644 --- a/configs/nios2-generic_defconfig +++ b/configs/nios2-generic_defconfig @@ -1,3 +1,9 @@ CONFIG_NIOS2=y CONFIG_TARGET_NIOS2_GENERIC=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/nitrogen6dl2g_defconfig b/configs/nitrogen6dl2g_defconfig index 7216400..6cbc0e3 100644 --- a/configs/nitrogen6dl2g_defconfig +++ b/configs/nitrogen6dl2g_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_NITROGEN6X=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl2g.cfg,MX6DL,DDR_MB=2048" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/nitrogen6dl_defconfig b/configs/nitrogen6dl_defconfig index 805b1d8..055266c 100644 --- a/configs/nitrogen6dl_defconfig +++ b/configs/nitrogen6dl_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_NITROGEN6X=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/nitrogen6q2g_defconfig b/configs/nitrogen6q2g_defconfig index 2dc8c5c..7b5ccc7 100644 --- a/configs/nitrogen6q2g_defconfig +++ b/configs/nitrogen6q2g_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_NITROGEN6X=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q,DDR_MB=2048" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/nitrogen6q_defconfig b/configs/nitrogen6q_defconfig index fc7e708..5cc245e 100644 --- a/configs/nitrogen6q_defconfig +++ b/configs/nitrogen6q_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_NITROGEN6X=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/nitrogen6s1g_defconfig b/configs/nitrogen6s1g_defconfig index 29dc3d9..b613a49 100644 --- a/configs/nitrogen6s1g_defconfig +++ b/configs/nitrogen6s1g_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_NITROGEN6X=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/nitrogen6s_defconfig b/configs/nitrogen6s_defconfig index 4f13504..b7cd09a 100644 --- a/configs/nitrogen6s_defconfig +++ b/configs/nitrogen6s_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_NITROGEN6X=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/nokia_rx51_defconfig b/configs/nokia_rx51_defconfig index 3aff2e6..c40dadf 100644 --- a/configs/nokia_rx51_defconfig +++ b/configs/nokia_rx51_defconfig @@ -2,3 +2,11 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_NOKIA_RX51=y CONFIG_AUTOBOOT_KEYED=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/novena_defconfig b/configs/novena_defconfig index ccc0055..aca98b7 100644 --- a/configs/novena_defconfig +++ b/configs/novena_defconfig @@ -2,5 +2,5 @@ CONFIG_ARM=y CONFIG_TARGET_KOSAGI_NOVENA=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set diff --git a/configs/nyan-big_defconfig b/configs/nyan-big_defconfig index a040b1c..79b74a7 100644 --- a/configs/nyan-big_defconfig +++ b/configs/nyan-big_defconfig @@ -3,7 +3,12 @@ CONFIG_TEGRA=y CONFIG_TEGRA124=y CONFIG_TARGET_NYAN_BIG=y CONFIG_DEFAULT_DEVICE_TREE="tegra124-nyan-big" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_SPL_DM=y CONFIG_SPI_FLASH=y CONFIG_CMD_CROS_EC=y diff --git a/configs/ocotea_defconfig b/configs/ocotea_defconfig index 864aefb..34518cd 100644 --- a/configs/ocotea_defconfig +++ b/configs/ocotea_defconfig @@ -1,5 +1,3 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_OCOTEA=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig index e081c73..2b960d5 100644 --- a/configs/odroid-xu3_defconfig +++ b/configs/odroid-xu3_defconfig @@ -3,6 +3,7 @@ CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_ODROID_XU3=y CONFIG_DEFAULT_DEVICE_TREE="exynos5422-odroidxu3" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/odroid_defconfig b/configs/odroid_defconfig index 3cef0ec..3104f88 100644 --- a/configs/odroid_defconfig +++ b/configs/odroid_defconfig @@ -3,8 +3,11 @@ CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_ODROID=y CONFIG_DEFAULT_DEVICE_TREE="exynos4412-odroid" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_OF_CONTROL=y diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig index e5b1f3a..dde076a 100644 --- a/configs/omap3_beagle_defconfig +++ b/configs/omap3_beagle_defconfig @@ -3,5 +3,5 @@ CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_BEAGLE=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="NAND" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set diff --git a/configs/omap3_evm_defconfig b/configs/omap3_evm_defconfig index d48cfc2..65b6f6a 100644 --- a/configs/omap3_evm_defconfig +++ b/configs/omap3_evm_defconfig @@ -2,4 +2,8 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_EVM=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/omap3_evm_quick_mmc_defconfig b/configs/omap3_evm_quick_mmc_defconfig index 7d0a973..527b465 100644 --- a/configs/omap3_evm_quick_mmc_defconfig +++ b/configs/omap3_evm_quick_mmc_defconfig @@ -2,4 +2,24 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_EVM_QUICK_MMC=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_MEMORY is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set diff --git a/configs/omap3_evm_quick_nand_defconfig b/configs/omap3_evm_quick_nand_defconfig index 6dec5cd..e3278b5 100644 --- a/configs/omap3_evm_quick_nand_defconfig +++ b/configs/omap3_evm_quick_nand_defconfig @@ -2,4 +2,24 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_EVM_QUICK_NAND=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_MEMORY is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set diff --git a/configs/omap3_ha_defconfig b/configs/omap3_ha_defconfig index 3d596a7..f22b50e 100644 --- a/configs/omap3_ha_defconfig +++ b/configs/omap3_ha_defconfig @@ -3,4 +3,8 @@ CONFIG_OMAP34XX=y CONFIG_TARGET_TAO3530=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SYS_BOARD_OMAP3_HA" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig index c9fdda8..b11d2e4 100644 --- a/configs/omap3_logic_defconfig +++ b/configs/omap3_logic_defconfig @@ -1,5 +1,7 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_LOGIC=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set diff --git a/configs/omap3_mvblx_defconfig b/configs/omap3_mvblx_defconfig index 05c1c46..415b02e 100644 --- a/configs/omap3_mvblx_defconfig +++ b/configs/omap3_mvblx_defconfig @@ -3,4 +3,6 @@ CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_MVBLX=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR="S" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/omap3_overo_defconfig b/configs/omap3_overo_defconfig index 9416bce..8d55590 100644 --- a/configs/omap3_overo_defconfig +++ b/configs/omap3_overo_defconfig @@ -2,4 +2,9 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_OVERO=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/omap3_pandora_defconfig b/configs/omap3_pandora_defconfig index bf28537..f18a520 100644 --- a/configs/omap3_pandora_defconfig +++ b/configs/omap3_pandora_defconfig @@ -1,3 +1,10 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_PANDORA=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/omap3_sdp3430_defconfig b/configs/omap3_sdp3430_defconfig index 846fd1a..df9e709 100644 --- a/configs/omap3_sdp3430_defconfig +++ b/configs/omap3_sdp3430_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_SDP3430=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/omap3_zoom1_defconfig b/configs/omap3_zoom1_defconfig index ba05d08..9efd6de 100644 --- a/configs/omap3_zoom1_defconfig +++ b/configs/omap3_zoom1_defconfig @@ -1,4 +1,8 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_OMAP3_ZOOM1=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/omap4_panda_defconfig b/configs/omap4_panda_defconfig index ec6a63a..1be285d 100644 --- a/configs/omap4_panda_defconfig +++ b/configs/omap4_panda_defconfig @@ -2,4 +2,7 @@ CONFIG_ARM=y CONFIG_OMAP44XX=y CONFIG_TARGET_OMAP4_PANDA=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/omap4_sdp4430_defconfig b/configs/omap4_sdp4430_defconfig index 0598136..b369d1d 100644 --- a/configs/omap4_sdp4430_defconfig +++ b/configs/omap4_sdp4430_defconfig @@ -2,3 +2,8 @@ CONFIG_ARM=y CONFIG_OMAP44XX=y CONFIG_TARGET_OMAP4_SDP4430=y CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/omap5_uevm_defconfig b/configs/omap5_uevm_defconfig index d2ad480..15221ad 100644 --- a/configs/omap5_uevm_defconfig +++ b/configs/omap5_uevm_defconfig @@ -2,4 +2,6 @@ CONFIG_ARM=y CONFIG_OMAP54XX=y CONFIG_TARGET_OMAP5_UEVM=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig index 1e76735..a49be95 100644 --- a/configs/omapl138_lcdk_defconfig +++ b/configs/omapl138_lcdk_defconfig @@ -2,5 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_OMAPL138_LCDK=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/openrd_base_defconfig b/configs/openrd_base_defconfig index a620e61..1686139 100644 --- a/configs/openrd_base_defconfig +++ b/configs/openrd_base_defconfig @@ -2,4 +2,6 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_OPENRD=y CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_BASE" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/openrd_client_defconfig b/configs/openrd_client_defconfig index 4a49663..c342315 100644 --- a/configs/openrd_client_defconfig +++ b/configs/openrd_client_defconfig @@ -2,4 +2,6 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_OPENRD=y CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_CLIENT" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/openrd_ultimate_defconfig b/configs/openrd_ultimate_defconfig index a81b382..530ba4d 100644 --- a/configs/openrd_ultimate_defconfig +++ b/configs/openrd_ultimate_defconfig @@ -2,4 +2,6 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_OPENRD=y CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_ULTIMATE" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/openrisc-generic_defconfig b/configs/openrisc-generic_defconfig index fb4024a..54cd832 100644 --- a/configs/openrisc-generic_defconfig +++ b/configs/openrisc-generic_defconfig @@ -1,3 +1,5 @@ CONFIG_OPENRISC=y CONFIG_TARGET_OPENRISC_GENERIC=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/origen_defconfig b/configs/origen_defconfig index a893660..6961978 100644 --- a/configs/origen_defconfig +++ b/configs/origen_defconfig @@ -3,7 +3,12 @@ CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_ORIGEN=y CONFIG_DEFAULT_DEVICE_TREE="exynos4210-origen" CONFIG_SPL=y -CONFIG_CMD_SETEXPR=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set CONFIG_OF_CONTROL=y CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_USB=y diff --git a/configs/ot1200_defconfig b/configs/ot1200_defconfig index b4cce31..ea78934 100644 --- a/configs/ot1200_defconfig +++ b/configs/ot1200_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_OT1200=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/bachmann/ot1200/mx6q_4x_mt41j128.cfg,MX6Q" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/ot1200_spl_defconfig b/configs/ot1200_spl_defconfig index 42eefb8..3c7346b 100644 --- a/configs/ot1200_spl_defconfig +++ b/configs/ot1200_spl_defconfig @@ -2,6 +2,6 @@ CONFIG_ARM=y CONFIG_TARGET_OT1200=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/otc570_dataflash_defconfig b/configs/otc570_dataflash_defconfig index ffa756c..c5ff59a 100644 --- a/configs/otc570_dataflash_defconfig +++ b/configs/otc570_dataflash_defconfig @@ -2,4 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_OTC570=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/otc570_defconfig b/configs/otc570_defconfig index e1f666bd..8cc55ee 100644 --- a/configs/otc570_defconfig +++ b/configs/otc570_defconfig @@ -2,4 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_OTC570=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_NANDFLASH" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/p3p440_defconfig b/configs/p3p440_defconfig index 2b1a02e..84e683b 100644 --- a/configs/p3p440_defconfig +++ b/configs/p3p440_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_P3P440=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/palmld_defconfig b/configs/palmld_defconfig index 599acc3..8bf6c53 100644 --- a/configs/palmld_defconfig +++ b/configs/palmld_defconfig @@ -1,2 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_PALMLD=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/palmtc_defconfig b/configs/palmtc_defconfig index 91cb76d..4042466 100644 --- a/configs/palmtc_defconfig +++ b/configs/palmtc_defconfig @@ -1,2 +1,5 @@ CONFIG_ARM=y CONFIG_TARGET_PALMTC=y +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/palmtreo680_defconfig b/configs/palmtreo680_defconfig index f30d2b7..b56191d 100644 --- a/configs/palmtreo680_defconfig +++ b/configs/palmtreo680_defconfig @@ -1,3 +1,12 @@ CONFIG_ARM=y CONFIG_TARGET_PALMTREO680=y CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/paz00_defconfig b/configs/paz00_defconfig index 1dfef48..60fb2d6 100644 --- a/configs/paz00_defconfig +++ b/configs/paz00_defconfig @@ -3,7 +3,12 @@ CONFIG_TEGRA=y CONFIG_TEGRA20=y CONFIG_TARGET_PAZ00=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-paz00" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_SPL_DM=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/pb1000_defconfig b/configs/pb1000_defconfig index 4b8212c..72756a7 100644 --- a/configs/pb1000_defconfig +++ b/configs/pb1000_defconfig @@ -1,5 +1,12 @@ CONFIG_MIPS=y CONFIG_TARGET_PB1X00=y CONFIG_SYS_EXTRA_OPTIONS="PB1000" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/pcm030_LOWBOOT_defconfig b/configs/pcm030_LOWBOOT_defconfig index 5ec6370..42389bb 100644 --- a/configs/pcm030_LOWBOOT_defconfig +++ b/configs/pcm030_LOWBOOT_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_PCM030=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xFF000000" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/pcm030_defconfig b/configs/pcm030_defconfig index da0cb5f..df9309e 100644 --- a/configs/pcm030_defconfig +++ b/configs/pcm030_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_PCM030=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/pcm051_rev1_defconfig b/configs/pcm051_rev1_defconfig index 8050b42..2f1022c 100644 --- a/configs/pcm051_rev1_defconfig +++ b/configs/pcm051_rev1_defconfig @@ -2,5 +2,7 @@ CONFIG_ARM=y CONFIG_TARGET_PCM051=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="REV1" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/pcm051_rev3_defconfig b/configs/pcm051_rev3_defconfig index 16f314e..61d94b8 100644 --- a/configs/pcm051_rev3_defconfig +++ b/configs/pcm051_rev3_defconfig @@ -2,5 +2,7 @@ CONFIG_ARM=y CONFIG_TARGET_PCM051=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="REV3" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/pcs440ep_defconfig b/configs/pcs440ep_defconfig index 593766e..b01f63a 100644 --- a/configs/pcs440ep_defconfig +++ b/configs/pcs440ep_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_PCS440EP=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/pdm360ng_defconfig b/configs/pdm360ng_defconfig index ca83cc0..3997f59 100644 --- a/configs/pdm360ng_defconfig +++ b/configs/pdm360ng_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC512X=y CONFIG_TARGET_PDM360NG=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/peach-pi_defconfig b/configs/peach-pi_defconfig index a198455..c17fc73 100644 --- a/configs/peach-pi_defconfig +++ b/configs/peach-pi_defconfig @@ -3,7 +3,8 @@ CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_PEACH_PI=y CONFIG_DEFAULT_DEVICE_TREE="exynos5800-peach-pi" CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_CMD_CROS_EC=y CONFIG_CROS_EC=y diff --git a/configs/peach-pit_defconfig b/configs/peach-pit_defconfig index a519cff..8f21722 100644 --- a/configs/peach-pit_defconfig +++ b/configs/peach-pit_defconfig @@ -3,7 +3,8 @@ CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_PEACH_PIT=y CONFIG_DEFAULT_DEVICE_TREE="exynos5420-peach-pit" CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_CMD_CROS_EC=y CONFIG_CROS_EC=y diff --git a/configs/pengwyn_defconfig b/configs/pengwyn_defconfig index 72ccb3e..38add54 100644 --- a/configs/pengwyn_defconfig +++ b/configs/pengwyn_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_PENGWYN=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/pepper_defconfig b/configs/pepper_defconfig index c4c6257..eb1b6cf 100644 --- a/configs/pepper_defconfig +++ b/configs/pepper_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_PEPPER=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/ph1_ld4_defconfig b/configs/ph1_ld4_defconfig index 9b8c668..650201a 100644 --- a/configs/ph1_ld4_defconfig +++ b/configs/ph1_ld4_defconfig @@ -11,29 +11,17 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_BDI=y -CONFIG_CMD_CONSOLE=y -CONFIG_CMD_BOOTD=y -CONFIG_CMD_RUN=y -CONFIG_CMD_IMI=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_EDITENV=y -CONFIG_CMD_SAVEENV=y -CONFIG_CMD_MEMORY=y -CONFIG_CMD_LOADB=y -CONFIG_CMD_LOADS=y -CONFIG_CMD_FLASH=y +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_ENV_EXISTS is not set CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_ECHO=y -CONFIG_CMD_ITEST=y -CONFIG_CMD_SOURCE=y -CONFIG_CMD_NET=y +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y -CONFIG_CMD_NFS=y CONFIG_CMD_PING=y CONFIG_CMD_TIME=y +# CONFIG_CMD_MISC is not set CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y CONFIG_NAND_DENALI=y diff --git a/configs/ph1_pro4_defconfig b/configs/ph1_pro4_defconfig index bf0f8f2..7d8d9cc 100644 --- a/configs/ph1_pro4_defconfig +++ b/configs/ph1_pro4_defconfig @@ -10,29 +10,17 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_BDI=y -CONFIG_CMD_CONSOLE=y -CONFIG_CMD_BOOTD=y -CONFIG_CMD_RUN=y -CONFIG_CMD_IMI=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_EDITENV=y -CONFIG_CMD_SAVEENV=y -CONFIG_CMD_MEMORY=y -CONFIG_CMD_LOADB=y -CONFIG_CMD_LOADS=y -CONFIG_CMD_FLASH=y +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_ENV_EXISTS is not set CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_ECHO=y -CONFIG_CMD_ITEST=y -CONFIG_CMD_SOURCE=y -CONFIG_CMD_NET=y +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y -CONFIG_CMD_NFS=y CONFIG_CMD_PING=y CONFIG_CMD_TIME=y +# CONFIG_CMD_MISC is not set CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y CONFIG_NAND_DENALI=y diff --git a/configs/ph1_sld8_defconfig b/configs/ph1_sld8_defconfig index 791e633..90c44ac 100644 --- a/configs/ph1_sld8_defconfig +++ b/configs/ph1_sld8_defconfig @@ -11,29 +11,17 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_BDI=y -CONFIG_CMD_CONSOLE=y -CONFIG_CMD_BOOTD=y -CONFIG_CMD_RUN=y -CONFIG_CMD_IMI=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_EDITENV=y -CONFIG_CMD_SAVEENV=y -CONFIG_CMD_MEMORY=y -CONFIG_CMD_LOADB=y -CONFIG_CMD_LOADS=y -CONFIG_CMD_FLASH=y +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_ENV_EXISTS is not set CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_ECHO=y -CONFIG_CMD_ITEST=y -CONFIG_CMD_SOURCE=y -CONFIG_CMD_NET=y +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y -CONFIG_CMD_NFS=y CONFIG_CMD_PING=y CONFIG_CMD_TIME=y +# CONFIG_CMD_MISC is not set CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y CONFIG_NAND_DENALI=y diff --git a/configs/platinum_picon_defconfig b/configs/platinum_picon_defconfig index 672ea28..3484c46 100644 --- a/configs/platinum_picon_defconfig +++ b/configs/platinum_picon_defconfig @@ -2,4 +2,6 @@ CONFIG_ARM=y CONFIG_TARGET_PLATINUM_PICON=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6DL" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/platinum_titanium_defconfig b/configs/platinum_titanium_defconfig index 39236f1..6a2cacf 100644 --- a/configs/platinum_titanium_defconfig +++ b/configs/platinum_titanium_defconfig @@ -2,4 +2,6 @@ CONFIG_ARM=y CONFIG_TARGET_PLATINUM_TITANIUM=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/plutux_defconfig b/configs/plutux_defconfig index c9a3afe..8d96e33 100644 --- a/configs/plutux_defconfig +++ b/configs/plutux_defconfig @@ -3,7 +3,12 @@ CONFIG_TEGRA=y CONFIG_TEGRA20=y CONFIG_TARGET_PLUTUX=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-plutux" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_SPL_DM=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/pm9261_defconfig b/configs/pm9261_defconfig index 3393fba..2c842b4 100644 --- a/configs/pm9261_defconfig +++ b/configs/pm9261_defconfig @@ -2,4 +2,9 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_PM9261=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/pm9263_defconfig b/configs/pm9263_defconfig index c6398f5..a065ce0 100644 --- a/configs/pm9263_defconfig +++ b/configs/pm9263_defconfig @@ -2,4 +2,9 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_PM9263=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/pm9g45_defconfig b/configs/pm9g45_defconfig index 5227bd2..bbaeae8 100644 --- a/configs/pm9g45_defconfig +++ b/configs/pm9g45_defconfig @@ -2,4 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_PM9G45=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G45" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/pogo_e02_defconfig b/configs/pogo_e02_defconfig index 11af9cf..f21237f 100644 --- a/configs/pogo_e02_defconfig +++ b/configs/pogo_e02_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_POGO_E02=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/polaris_defconfig b/configs/polaris_defconfig index 703c48b..e209566 100644 --- a/configs/polaris_defconfig +++ b/configs/polaris_defconfig @@ -1,4 +1,4 @@ CONFIG_ARM=y CONFIG_TARGET_TRIZEPSIV=y CONFIG_SYS_EXTRA_OPTIONS="POLARIS" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/porter_defconfig b/configs/porter_defconfig index 1ef1483..15f3434 100644 --- a/configs/porter_defconfig +++ b/configs/porter_defconfig @@ -1,6 +1,20 @@ CONFIG_ARM=y CONFIG_RMOBILE=y CONFIG_TARGET_PORTER=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set CONFIG_SPI_FLASH=y CONFIG_SH_SDHI=y diff --git a/configs/portl2_defconfig b/configs/portl2_defconfig index e6c9730..3ff9ebb 100644 --- a/configs/portl2_defconfig +++ b/configs/portl2_defconfig @@ -2,6 +2,6 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_KM_KIRKWOOD=y CONFIG_SYS_EXTRA_OPTIONS="KM_PORTL2" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/portuxg20_defconfig b/configs/portuxg20_defconfig index aa44a80..1e8344f 100644 --- a/configs/portuxg20_defconfig +++ b/configs/portuxg20_defconfig @@ -2,4 +2,9 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_STAMP9G20=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,PORTUXG20" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/pr1_defconfig b/configs/pr1_defconfig index 405e494..b06babc 100644 --- a/configs/pr1_defconfig +++ b/configs/pr1_defconfig @@ -1,6 +1,8 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_PR1=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y CONFIG_LIB_RAND=y diff --git a/configs/pxa255_idp_defconfig b/configs/pxa255_idp_defconfig index ad9bd4c..c7be4e9 100644 --- a/configs/pxa255_idp_defconfig +++ b/configs/pxa255_idp_defconfig @@ -1,3 +1,3 @@ CONFIG_ARM=y CONFIG_TARGET_PXA255_IDP=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/pxm2_defconfig b/configs/pxm2_defconfig index 63fd450..0bb42ff 100644 --- a/configs/pxm2_defconfig +++ b/configs/pxm2_defconfig @@ -4,5 +4,7 @@ CONFIG_SPL=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/qemu-ppce500_defconfig b/configs/qemu-ppce500_defconfig index 3f58564..27daa62 100644 --- a/configs/qemu-ppce500_defconfig +++ b/configs/qemu-ppce500_defconfig @@ -1,5 +1,5 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_QEMU_PPCE500=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set diff --git a/configs/qemu-x86_defconfig b/configs/qemu-x86_defconfig index 38e0fdb..5639cc5 100644 --- a/configs/qemu-x86_defconfig +++ b/configs/qemu-x86_defconfig @@ -1,7 +1,10 @@ CONFIG_X86=y CONFIG_DEFAULT_DEVICE_TREE="qemu-x86_i440fx" CONFIG_GENERATE_PIRQ_TABLE=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y CONFIG_CMD_BOOTSTAGE=y diff --git a/configs/qemu_mips64_defconfig b/configs/qemu_mips64_defconfig index 9eceae6..4187430 100644 --- a/configs/qemu_mips64_defconfig +++ b/configs/qemu_mips64_defconfig @@ -1,5 +1,7 @@ CONFIG_MIPS=y CONFIG_TARGET_QEMU_MIPS=y CONFIG_CPU_MIPS64_R1=y -CONFIG_CMD_NET=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/qemu_mips64el_defconfig b/configs/qemu_mips64el_defconfig index d847757..c8bcbb7 100644 --- a/configs/qemu_mips64el_defconfig +++ b/configs/qemu_mips64el_defconfig @@ -2,5 +2,7 @@ CONFIG_MIPS=y CONFIG_TARGET_QEMU_MIPS=y CONFIG_SYS_LITTLE_ENDIAN=y CONFIG_CPU_MIPS64_R1=y -CONFIG_CMD_NET=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/qemu_mips_defconfig b/configs/qemu_mips_defconfig index 714e72b..337ecea 100644 --- a/configs/qemu_mips_defconfig +++ b/configs/qemu_mips_defconfig @@ -1,4 +1,6 @@ CONFIG_MIPS=y CONFIG_TARGET_QEMU_MIPS=y -CONFIG_CMD_NET=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/qemu_mipsel_defconfig b/configs/qemu_mipsel_defconfig index f6cb45e..bfb3bcc 100644 --- a/configs/qemu_mipsel_defconfig +++ b/configs/qemu_mipsel_defconfig @@ -1,5 +1,7 @@ CONFIG_MIPS=y CONFIG_TARGET_QEMU_MIPS=y CONFIG_SYS_LITTLE_ENDIAN=y -CONFIG_CMD_NET=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/qong_defconfig b/configs/qong_defconfig index 233b046..fddd836 100644 --- a/configs/qong_defconfig +++ b/configs/qong_defconfig @@ -1,4 +1,2 @@ CONFIG_ARM=y CONFIG_TARGET_QONG=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/r0p7734_defconfig b/configs/r0p7734_defconfig index 727c46c..d8a15ac 100644 --- a/configs/r0p7734_defconfig +++ b/configs/r0p7734_defconfig @@ -1,4 +1,20 @@ CONFIG_SH=y CONFIG_TARGET_R0P7734=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/r2dplus_defconfig b/configs/r2dplus_defconfig index 05026bc..cca0156 100644 --- a/configs/r2dplus_defconfig +++ b/configs/r2dplus_defconfig @@ -1,4 +1,4 @@ CONFIG_SH=y CONFIG_TARGET_R2DPLUS=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/r7-tv-dongle_defconfig b/configs/r7-tv-dongle_defconfig index 9c124d0..ac7928d 100644 --- a/configs/r7-tv-dongle_defconfig +++ b/configs/r7-tv-dongle_defconfig @@ -7,10 +7,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-r7-tv-dongle" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/r7780mp_defconfig b/configs/r7780mp_defconfig index 514bd70..180b9e9 100644 --- a/configs/r7780mp_defconfig +++ b/configs/r7780mp_defconfig @@ -1,4 +1,20 @@ CONFIG_SH=y CONFIG_TARGET_R7780MP=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/rainier_defconfig b/configs/rainier_defconfig index e84b349..1713592 100644 --- a/configs/rainier_defconfig +++ b/configs/rainier_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_SEQUOIA=y CONFIG_SYS_EXTRA_OPTIONS="RAINIER" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/rainier_ramboot_defconfig b/configs/rainier_ramboot_defconfig index cca296e..ba22d9d 100644 --- a/configs/rainier_ramboot_defconfig +++ b/configs/rainier_ramboot_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_SEQUOIA=y CONFIG_SYS_EXTRA_OPTIONS="RAINIER,SYS_RAMBOOT,SYS_TEXT_BASE=0x01000000,SYS_LDSCRIPT=board/amcc/sequoia/u-boot-ram.lds" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/rastaban_defconfig b/configs/rastaban_defconfig index 2315715..2b126ac 100644 --- a/configs/rastaban_defconfig +++ b/configs/rastaban_defconfig @@ -4,5 +4,7 @@ CONFIG_SPL=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/rd6281a_defconfig b/configs/rd6281a_defconfig index 1a9fcd3..8fe8594 100644 --- a/configs/rd6281a_defconfig +++ b/configs/rd6281a_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_RD6281A=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/redwood_defconfig b/configs/redwood_defconfig index 97252c4..ad87d0e 100644 --- a/configs/redwood_defconfig +++ b/configs/redwood_defconfig @@ -1,5 +1,3 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_REDWOOD=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/riotboard_defconfig b/configs/riotboard_defconfig index cbe3dea..fd18e2d 100644 --- a/configs/riotboard_defconfig +++ b/configs/riotboard_defconfig @@ -1,8 +1,8 @@ CONFIG_ARM=y CONFIG_TARGET_EMBESTMX6BOARDS=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024,ENV_IS_IN_MMC" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_DM=y CONFIG_SPI_FLASH=y CONFIG_DM_THERMAL=y diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig index 534a8a8..139189d 100644 --- a/configs/rpi_2_defconfig +++ b/configs/rpi_2_defconfig @@ -1,5 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_BCM283X=y CONFIG_TARGET_RPI_2=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_PHYS_TO_BUS=y diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig index ccfbb8f..db8da68 100644 --- a/configs/rpi_defconfig +++ b/configs/rpi_defconfig @@ -1,5 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_BCM283X=y CONFIG_TARGET_RPI=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_PHYS_TO_BUS=y diff --git a/configs/rsk7203_defconfig b/configs/rsk7203_defconfig index 27f9b65..6134172 100644 --- a/configs/rsk7203_defconfig +++ b/configs/rsk7203_defconfig @@ -1,4 +1,20 @@ CONFIG_SH=y CONFIG_TARGET_RSK7203=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/rsk7264_defconfig b/configs/rsk7264_defconfig index 701f73a..272bd86 100644 --- a/configs/rsk7264_defconfig +++ b/configs/rsk7264_defconfig @@ -1,4 +1,4 @@ CONFIG_SH=y CONFIG_TARGET_RSK7264=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/rsk7269_defconfig b/configs/rsk7269_defconfig index ae5fe02..41e70a5 100644 --- a/configs/rsk7269_defconfig +++ b/configs/rsk7269_defconfig @@ -1,4 +1,4 @@ CONFIG_SH=y CONFIG_TARGET_RSK7269=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/rut_defconfig b/configs/rut_defconfig index 2f125e4..da9dfe3 100644 --- a/configs/rut_defconfig +++ b/configs/rut_defconfig @@ -4,5 +4,7 @@ CONFIG_SPL=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/s5p_goni_defconfig b/configs/s5p_goni_defconfig index 618e590..7e03b9d 100644 --- a/configs/s5p_goni_defconfig +++ b/configs/s5p_goni_defconfig @@ -2,3 +2,11 @@ CONFIG_ARM=y CONFIG_ARCH_S5PC1XX=y CONFIG_TARGET_S5P_GONI=y CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-goni" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set diff --git a/configs/s5pc210_universal_defconfig b/configs/s5pc210_universal_defconfig index 30d6059..21a4708 100644 --- a/configs/s5pc210_universal_defconfig +++ b/configs/s5pc210_universal_defconfig @@ -2,7 +2,12 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_S5PC210_UNIVERSAL=y CONFIG_DEFAULT_DEVICE_TREE="exynos4210-universal_c210" -CONFIG_CMD_SETEXPR=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set CONFIG_OF_CONTROL=y CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_USB=y diff --git a/configs/sama5d3_xplained_mmc_defconfig b/configs/sama5d3_xplained_mmc_defconfig index 5a39b2e..36f8254 100644 --- a/configs/sama5d3_xplained_mmc_defconfig +++ b/configs/sama5d3_xplained_mmc_defconfig @@ -3,5 +3,8 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_SAMA5D3_XPLAINED=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_MMC" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set diff --git a/configs/sama5d3_xplained_nandflash_defconfig b/configs/sama5d3_xplained_nandflash_defconfig index 59d9e21..2de83d4 100644 --- a/configs/sama5d3_xplained_nandflash_defconfig +++ b/configs/sama5d3_xplained_nandflash_defconfig @@ -3,5 +3,8 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_SAMA5D3_XPLAINED=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_NANDFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set diff --git a/configs/sama5d3xek_mmc_defconfig b/configs/sama5d3xek_mmc_defconfig index 5c5841f..e953d0a 100644 --- a/configs/sama5d3xek_mmc_defconfig +++ b/configs/sama5d3xek_mmc_defconfig @@ -3,6 +3,7 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_SAMA5D3XEK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_MMC" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set CONFIG_SPI_FLASH=y diff --git a/configs/sama5d3xek_nandflash_defconfig b/configs/sama5d3xek_nandflash_defconfig index d178620..832b9eb 100644 --- a/configs/sama5d3xek_nandflash_defconfig +++ b/configs/sama5d3xek_nandflash_defconfig @@ -3,6 +3,7 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_SAMA5D3XEK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_NANDFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set CONFIG_SPI_FLASH=y diff --git a/configs/sama5d3xek_spiflash_defconfig b/configs/sama5d3xek_spiflash_defconfig index ad0aedf..bcfc65b 100644 --- a/configs/sama5d3xek_spiflash_defconfig +++ b/configs/sama5d3xek_spiflash_defconfig @@ -3,6 +3,7 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_SAMA5D3XEK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_SERIALFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set CONFIG_SPI_FLASH=y diff --git a/configs/sama5d4_xplained_mmc_defconfig b/configs/sama5d4_xplained_mmc_defconfig index 0fa5852..42d302c 100644 --- a/configs/sama5d4_xplained_mmc_defconfig +++ b/configs/sama5d4_xplained_mmc_defconfig @@ -3,6 +3,9 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_SAMA5D4_XPLAINED=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_SPI_FLASH=y diff --git a/configs/sama5d4_xplained_nandflash_defconfig b/configs/sama5d4_xplained_nandflash_defconfig index 3bf4ac6..d27f572 100644 --- a/configs/sama5d4_xplained_nandflash_defconfig +++ b/configs/sama5d4_xplained_nandflash_defconfig @@ -3,6 +3,9 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_SAMA5D4_XPLAINED=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_SPI_FLASH=y diff --git a/configs/sama5d4_xplained_spiflash_defconfig b/configs/sama5d4_xplained_spiflash_defconfig index 1074471..e5d026a 100644 --- a/configs/sama5d4_xplained_spiflash_defconfig +++ b/configs/sama5d4_xplained_spiflash_defconfig @@ -3,6 +3,9 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_SAMA5D4_XPLAINED=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_SPI_FLASH=y diff --git a/configs/sama5d4ek_mmc_defconfig b/configs/sama5d4ek_mmc_defconfig index fc9e0f1..82fa9d4 100644 --- a/configs/sama5d4ek_mmc_defconfig +++ b/configs/sama5d4ek_mmc_defconfig @@ -3,6 +3,9 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_SAMA5D4EK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_SPI_FLASH=y diff --git a/configs/sama5d4ek_nandflash_defconfig b/configs/sama5d4ek_nandflash_defconfig index 3961654..a333e06 100644 --- a/configs/sama5d4ek_nandflash_defconfig +++ b/configs/sama5d4ek_nandflash_defconfig @@ -3,6 +3,9 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_SAMA5D4EK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_SPI_FLASH=y diff --git a/configs/sama5d4ek_spiflash_defconfig b/configs/sama5d4ek_spiflash_defconfig index 12857e4..fc6dbb0 100644 --- a/configs/sama5d4ek_spiflash_defconfig +++ b/configs/sama5d4ek_spiflash_defconfig @@ -3,6 +3,9 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_SAMA5D4EK=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_SPI_FLASH=y diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index 4c2c230..598519d 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -3,7 +3,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sandbox" CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_CMD_SOUND=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y @@ -19,7 +21,6 @@ CONFIG_CMD_CROS_EC=y CONFIG_CROS_EC=y CONFIG_CROS_EC_SANDBOX=y CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_CROS_EC_KEYB=y CONFIG_SANDBOX_SERIAL=y CONFIG_TPM_TIS_SANDBOX=y diff --git a/configs/sansa_fuze_plus_defconfig b/configs/sansa_fuze_plus_defconfig index e1aae9c..840f9d4 100644 --- a/configs/sansa_fuze_plus_defconfig +++ b/configs/sansa_fuze_plus_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SANSA_FUZE_PLUS=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/sbc405_defconfig b/configs/sbc405_defconfig index 7324f22..0bc0ab2 100644 --- a/configs/sbc405_defconfig +++ b/configs/sbc405_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_SBC405=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/sbc8349_PCI_33_defconfig b/configs/sbc8349_PCI_33_defconfig index 46218f2..c03a807 100644 --- a/configs/sbc8349_PCI_33_defconfig +++ b/configs/sbc8349_PCI_33_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_SBC8349=y CONFIG_SYS_EXTRA_OPTIONS="PCI,PCI_33M" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/sbc8349_PCI_66_defconfig b/configs/sbc8349_PCI_66_defconfig index 496b649..030c2d6 100644 --- a/configs/sbc8349_PCI_66_defconfig +++ b/configs/sbc8349_PCI_66_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_SBC8349=y CONFIG_SYS_EXTRA_OPTIONS="PCI,PCI_66M" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/sbc8349_defconfig b/configs/sbc8349_defconfig index fe59219..01392aa 100644 --- a/configs/sbc8349_defconfig +++ b/configs/sbc8349_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_SBC8349=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/sbc8548_PCI_33_PCIE_defconfig b/configs/sbc8548_PCI_33_PCIE_defconfig index a355db8..b6e8766 100644 --- a/configs/sbc8548_PCI_33_PCIE_defconfig +++ b/configs/sbc8548_PCI_33_PCIE_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_SBC8548=y CONFIG_SYS_EXTRA_OPTIONS="PCI,33,PCIE" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/sbc8548_PCI_33_defconfig b/configs/sbc8548_PCI_33_defconfig index b007ab7..f3c4ced 100644 --- a/configs/sbc8548_PCI_33_defconfig +++ b/configs/sbc8548_PCI_33_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_SBC8548=y CONFIG_SYS_EXTRA_OPTIONS="PCI,33" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/sbc8548_PCI_66_PCIE_defconfig b/configs/sbc8548_PCI_66_PCIE_defconfig index e9c9cdf..bb0ad95 100644 --- a/configs/sbc8548_PCI_66_PCIE_defconfig +++ b/configs/sbc8548_PCI_66_PCIE_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_SBC8548=y CONFIG_SYS_EXTRA_OPTIONS="PCI,66,PCIE" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/sbc8548_PCI_66_defconfig b/configs/sbc8548_PCI_66_defconfig index eca365e..d601416 100644 --- a/configs/sbc8548_PCI_66_defconfig +++ b/configs/sbc8548_PCI_66_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_SBC8548=y CONFIG_SYS_EXTRA_OPTIONS="PCI,66" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/sbc8548_defconfig b/configs/sbc8548_defconfig index 2c609b4..3e3b507 100644 --- a/configs/sbc8548_defconfig +++ b/configs/sbc8548_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_SBC8548=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/sbc8641d_defconfig b/configs/sbc8641d_defconfig index af43b5b..b67c7c0 100644 --- a/configs/sbc8641d_defconfig +++ b/configs/sbc8641d_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC86xx=y CONFIG_TARGET_SBC8641D=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/sc_sps_1_defconfig b/configs/sc_sps_1_defconfig index d4e72f7..468113d 100644 --- a/configs/sc_sps_1_defconfig +++ b/configs/sc_sps_1_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y CONFIG_TARGET_SC_SPS_1=y CONFIG_SPL=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set diff --git a/configs/scb9328_defconfig b/configs/scb9328_defconfig index 5ae7515..3104586 100644 --- a/configs/scb9328_defconfig +++ b/configs/scb9328_defconfig @@ -1,3 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SCB9328=y -CONFIG_CMD_NET=y +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/seaboard_defconfig b/configs/seaboard_defconfig index 01cb8f7..942f17e 100644 --- a/configs/seaboard_defconfig +++ b/configs/seaboard_defconfig @@ -3,7 +3,12 @@ CONFIG_TEGRA=y CONFIG_TEGRA20=y CONFIG_TARGET_SEABOARD=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-seaboard" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_SPL_DM=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/secomx6quq7_defconfig b/configs/secomx6quq7_defconfig index f9d7ee9..0095ceb 100644 --- a/configs/secomx6quq7_defconfig +++ b/configs/secomx6quq7_defconfig @@ -5,5 +5,5 @@ CONFIG_SECOMX6_UQ7=y CONFIG_SECOMX6Q=y CONFIG_SECOMX6_2GB=y CONFIG_SYS_EXTRA_OPTIONS="ENV_IS_IN_MMC" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set diff --git a/configs/sequoia_defconfig b/configs/sequoia_defconfig index 2ea6c78..bbaec61 100644 --- a/configs/sequoia_defconfig +++ b/configs/sequoia_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_SEQUOIA=y CONFIG_SYS_EXTRA_OPTIONS="SEQUOIA" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/sequoia_ramboot_defconfig b/configs/sequoia_ramboot_defconfig index 4522287..5b2c6f4 100644 --- a/configs/sequoia_ramboot_defconfig +++ b/configs/sequoia_ramboot_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_SEQUOIA=y CONFIG_SYS_EXTRA_OPTIONS="SEQUOIA,SYS_RAMBOOT,SYS_TEXT_BASE=0x01000000,SYS_LDSCRIPT=board/amcc/sequoia/u-boot-ram.lds" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/sh7752evb_defconfig b/configs/sh7752evb_defconfig index bd97913..b748e37 100644 --- a/configs/sh7752evb_defconfig +++ b/configs/sh7752evb_defconfig @@ -1,6 +1,21 @@ CONFIG_SH=y CONFIG_SH_32BIT=y CONFIG_TARGET_SH7752EVB=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set CONFIG_SPI_FLASH=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/sh7753evb_defconfig b/configs/sh7753evb_defconfig index 84c207a..7bac054 100644 --- a/configs/sh7753evb_defconfig +++ b/configs/sh7753evb_defconfig @@ -1,5 +1,20 @@ CONFIG_SH=y CONFIG_TARGET_SH7753EVB=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set CONFIG_SPI_FLASH=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/sh7757lcr_defconfig b/configs/sh7757lcr_defconfig index d22e70e..1a253dc 100644 --- a/configs/sh7757lcr_defconfig +++ b/configs/sh7757lcr_defconfig @@ -1,6 +1,21 @@ CONFIG_SH=y CONFIG_SH_32BIT=y CONFIG_TARGET_SH7757LCR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set CONFIG_SPI_FLASH=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/sh7763rdp_defconfig b/configs/sh7763rdp_defconfig index 21fbc6a..ff84516 100644 --- a/configs/sh7763rdp_defconfig +++ b/configs/sh7763rdp_defconfig @@ -1,4 +1,20 @@ CONFIG_SH=y CONFIG_TARGET_SH7763RDP=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/sh7785lcr_32bit_defconfig b/configs/sh7785lcr_32bit_defconfig index a0f0640..611ee18 100644 --- a/configs/sh7785lcr_32bit_defconfig +++ b/configs/sh7785lcr_32bit_defconfig @@ -1,5 +1,20 @@ CONFIG_SH=y CONFIG_SH_32BIT=y CONFIG_TARGET_SH7785LCR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/sh7785lcr_defconfig b/configs/sh7785lcr_defconfig index 0984580..bc27765 100644 --- a/configs/sh7785lcr_defconfig +++ b/configs/sh7785lcr_defconfig @@ -1,4 +1,19 @@ CONFIG_SH=y CONFIG_TARGET_SH7785LCR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/sheevaplug_defconfig b/configs/sheevaplug_defconfig index 7a0fb10..54e2ad7 100644 --- a/configs/sheevaplug_defconfig +++ b/configs/sheevaplug_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_SHEEVAPLUG=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/shmin_defconfig b/configs/shmin_defconfig index 8979fdd..8240aad 100644 --- a/configs/shmin_defconfig +++ b/configs/shmin_defconfig @@ -1,4 +1,20 @@ CONFIG_SH=y CONFIG_TARGET_SHMIN=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/silk_defconfig b/configs/silk_defconfig index ed107e3..20c85fd 100644 --- a/configs/silk_defconfig +++ b/configs/silk_defconfig @@ -1,6 +1,20 @@ CONFIG_ARM=y CONFIG_RMOBILE=y CONFIG_TARGET_SILK=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_MISC is not set CONFIG_SPI_FLASH=y CONFIG_SH_SDHI=y diff --git a/configs/smdk2410_defconfig b/configs/smdk2410_defconfig index 846ac8e..74bb9e3 100644 --- a/configs/smdk2410_defconfig +++ b/configs/smdk2410_defconfig @@ -1,3 +1,3 @@ CONFIG_ARM=y CONFIG_TARGET_SMDK2410=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/smdk5250_defconfig b/configs/smdk5250_defconfig index 9092f3b..8412d6f 100644 --- a/configs/smdk5250_defconfig +++ b/configs/smdk5250_defconfig @@ -3,7 +3,8 @@ CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_SMDK5250=y CONFIG_DEFAULT_DEVICE_TREE="exynos5250-smdk5250" CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_CMD_SOUND=y CONFIG_SPI_FLASH=y CONFIG_SOUND=y diff --git a/configs/smdk5420_defconfig b/configs/smdk5420_defconfig index e3d829b..a96b368 100644 --- a/configs/smdk5420_defconfig +++ b/configs/smdk5420_defconfig @@ -3,7 +3,8 @@ CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_SMDK5420=y CONFIG_DEFAULT_DEVICE_TREE="exynos5420-smdk5420" CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/smdkc100_defconfig b/configs/smdkc100_defconfig index bc17009..6c8359e 100644 --- a/configs/smdkc100_defconfig +++ b/configs/smdkc100_defconfig @@ -2,4 +2,6 @@ CONFIG_ARM=y CONFIG_ARCH_S5PC1XX=y CONFIG_TARGET_SMDKC100=y CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-smdkc100" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/smdkv310_defconfig b/configs/smdkv310_defconfig index 5d01f89..39dd5be 100644 --- a/configs/smdkv310_defconfig +++ b/configs/smdkv310_defconfig @@ -3,7 +3,10 @@ CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_SMDKV310=y CONFIG_DEFAULT_DEVICE_TREE="exynos4210-smdkv310" CONFIG_SPL=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/snapper9260_defconfig b/configs/snapper9260_defconfig index 942a73f..d319a4f 100644 --- a/configs/snapper9260_defconfig +++ b/configs/snapper9260_defconfig @@ -2,4 +2,11 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_SNAPPER9260=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/snapper9g20_defconfig b/configs/snapper9g20_defconfig index 9e814e4..def06f1 100644 --- a/configs/snapper9g20_defconfig +++ b/configs/snapper9g20_defconfig @@ -2,4 +2,11 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_SNAPPER9260=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/snow_defconfig b/configs/snow_defconfig index a43e51e..93fbcae 100644 --- a/configs/snow_defconfig +++ b/configs/snow_defconfig @@ -3,7 +3,8 @@ CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_SNOW=y CONFIG_DEFAULT_DEVICE_TREE="exynos5250-snow" CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_CMD_SOUND=y CONFIG_SPI_FLASH=y CONFIG_CMD_CROS_EC=y diff --git a/configs/snowball_defconfig b/configs/snowball_defconfig index 19100c2..31aa583 100644 --- a/configs/snowball_defconfig +++ b/configs/snowball_defconfig @@ -1,2 +1,12 @@ CONFIG_ARM=y CONFIG_TARGET_SNOWBALL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/socfpga_arria5_defconfig b/configs/socfpga_arria5_defconfig index 8c5b109..4ba4b8c 100644 --- a/configs/socfpga_arria5_defconfig +++ b/configs/socfpga_arria5_defconfig @@ -3,7 +3,7 @@ CONFIG_ARCH_SOCFPGA=y CONFIG_TARGET_SOCFPGA_ARRIA5=y CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria5_socdk" CONFIG_SPL=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_OF_CONTROL=y CONFIG_SPI_FLASH=y diff --git a/configs/socfpga_cyclone5_defconfig b/configs/socfpga_cyclone5_defconfig index 6302ec5..e101f76 100644 --- a/configs/socfpga_cyclone5_defconfig +++ b/configs/socfpga_cyclone5_defconfig @@ -3,8 +3,8 @@ CONFIG_ARCH_SOCFPGA=y CONFIG_TARGET_SOCFPGA_CYCLONE5=y CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socdk" CONFIG_SPL=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_OF_CONTROL=y CONFIG_SPI_FLASH=y CONFIG_NETDEVICES=y diff --git a/configs/socfpga_socrates_defconfig b/configs/socfpga_socrates_defconfig index cf390f3..63dda73 100644 --- a/configs/socfpga_socrates_defconfig +++ b/configs/socfpga_socrates_defconfig @@ -3,8 +3,8 @@ CONFIG_ARCH_SOCFPGA=y CONFIG_TARGET_SOCFPGA_CYCLONE5=y CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socrates" CONFIG_SPL=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_OF_CONTROL=y CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_SPI_FLASH=y diff --git a/configs/socrates_defconfig b/configs/socrates_defconfig index cabce0f..37af82e 100644 --- a/configs/socrates_defconfig +++ b/configs/socrates_defconfig @@ -1,4 +1,5 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_SOCRATES=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/spear300_defconfig b/configs/spear300_defconfig index 5d179b9..49296bc 100644 --- a/configs/spear300_defconfig +++ b/configs/spear300_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR300=y CONFIG_SYS_EXTRA_OPTIONS="spear300" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear300_nand_defconfig b/configs/spear300_nand_defconfig index d0a62a8..560ff26 100644 --- a/configs/spear300_nand_defconfig +++ b/configs/spear300_nand_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR300=y CONFIG_SYS_EXTRA_OPTIONS="spear300,nand" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear300_usbtty_defconfig b/configs/spear300_usbtty_defconfig index ae5c2b5..3e280d5 100644 --- a/configs/spear300_usbtty_defconfig +++ b/configs/spear300_usbtty_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR300=y CONFIG_SYS_EXTRA_OPTIONS="spear300,usbtty" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear300_usbtty_nand_defconfig b/configs/spear300_usbtty_nand_defconfig index a5020c9..97a0f2a 100644 --- a/configs/spear300_usbtty_nand_defconfig +++ b/configs/spear300_usbtty_nand_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR300=y CONFIG_SYS_EXTRA_OPTIONS="spear300,usbtty,nand" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear310_defconfig b/configs/spear310_defconfig index 0e01abd..d4ce01d 100644 --- a/configs/spear310_defconfig +++ b/configs/spear310_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR310=y CONFIG_SYS_EXTRA_OPTIONS="spear310" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear310_nand_defconfig b/configs/spear310_nand_defconfig index cd99e3a..517e42f 100644 --- a/configs/spear310_nand_defconfig +++ b/configs/spear310_nand_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR310=y CONFIG_SYS_EXTRA_OPTIONS="spear310,nand" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear310_pnor_defconfig b/configs/spear310_pnor_defconfig index ef4d3a1..2fe149b 100644 --- a/configs/spear310_pnor_defconfig +++ b/configs/spear310_pnor_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR310=y CONFIG_SYS_EXTRA_OPTIONS="spear310,FLASH_PNOR" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear310_usbtty_defconfig b/configs/spear310_usbtty_defconfig index 5dea48b..f8b027d 100644 --- a/configs/spear310_usbtty_defconfig +++ b/configs/spear310_usbtty_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR310=y CONFIG_SYS_EXTRA_OPTIONS="spear310,usbtty" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear310_usbtty_nand_defconfig b/configs/spear310_usbtty_nand_defconfig index c9b526c..a4d8fdc 100644 --- a/configs/spear310_usbtty_nand_defconfig +++ b/configs/spear310_usbtty_nand_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR310=y CONFIG_SYS_EXTRA_OPTIONS="spear310,usbtty,nand" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear310_usbtty_pnor_defconfig b/configs/spear310_usbtty_pnor_defconfig index d9d7214..fd1d8c0 100644 --- a/configs/spear310_usbtty_pnor_defconfig +++ b/configs/spear310_usbtty_pnor_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR310=y CONFIG_SYS_EXTRA_OPTIONS="spear310,usbtty,FLASH_PNOR" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear320_defconfig b/configs/spear320_defconfig index db0a1cd..e720f38 100644 --- a/configs/spear320_defconfig +++ b/configs/spear320_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR320=y CONFIG_SYS_EXTRA_OPTIONS="spear320" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear320_nand_defconfig b/configs/spear320_nand_defconfig index 691433b..24c01c6 100644 --- a/configs/spear320_nand_defconfig +++ b/configs/spear320_nand_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR320=y CONFIG_SYS_EXTRA_OPTIONS="spear320,nand" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear320_pnor_defconfig b/configs/spear320_pnor_defconfig index 41fb10e..636bb48 100644 --- a/configs/spear320_pnor_defconfig +++ b/configs/spear320_pnor_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR320=y CONFIG_SYS_EXTRA_OPTIONS="spear320,FLASH_PNOR" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear320_usbtty_defconfig b/configs/spear320_usbtty_defconfig index 3f73df6..ca98d58 100644 --- a/configs/spear320_usbtty_defconfig +++ b/configs/spear320_usbtty_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR320=y CONFIG_SYS_EXTRA_OPTIONS="spear320,usbtty" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear320_usbtty_nand_defconfig b/configs/spear320_usbtty_nand_defconfig index 8563f4c..cdb1f31 100644 --- a/configs/spear320_usbtty_nand_defconfig +++ b/configs/spear320_usbtty_nand_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR320=y CONFIG_SYS_EXTRA_OPTIONS="spear320,usbtty,nand" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear320_usbtty_pnor_defconfig b/configs/spear320_usbtty_pnor_defconfig index 3980280..85f2af6 100644 --- a/configs/spear320_usbtty_pnor_defconfig +++ b/configs/spear320_usbtty_pnor_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR320=y CONFIG_SYS_EXTRA_OPTIONS="spear320,usbtty,FLASH_PNOR" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear600_defconfig b/configs/spear600_defconfig index 85c484c..95a530b1 100644 --- a/configs/spear600_defconfig +++ b/configs/spear600_defconfig @@ -4,6 +4,6 @@ CONFIG_SYS_EXTRA_OPTIONS="spear600" CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear600_nand_defconfig b/configs/spear600_nand_defconfig index 715d949..019e74a 100644 --- a/configs/spear600_nand_defconfig +++ b/configs/spear600_nand_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR600=y CONFIG_SYS_EXTRA_OPTIONS="spear600,nand" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear600_usbtty_defconfig b/configs/spear600_usbtty_defconfig index 6709658..2168013 100644 --- a/configs/spear600_usbtty_defconfig +++ b/configs/spear600_usbtty_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR600=y CONFIG_SYS_EXTRA_OPTIONS="spear600,usbtty" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear600_usbtty_nand_defconfig b/configs/spear600_usbtty_nand_defconfig index fdadae2..fc501d9 100644 --- a/configs/spear600_usbtty_nand_defconfig +++ b/configs/spear600_usbtty_nand_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR600=y CONFIG_SYS_EXTRA_OPTIONS="spear600,usbtty,nand" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/stamp9g20_defconfig b/configs/stamp9g20_defconfig index 592203f..78c4775 100644 --- a/configs/stamp9g20_defconfig +++ b/configs/stamp9g20_defconfig @@ -2,4 +2,9 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_STAMP9G20=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/stm32f429-discovery_defconfig b/configs/stm32f429-discovery_defconfig index 3c868ff..188adc5 100644 --- a/configs/stm32f429-discovery_defconfig +++ b/configs/stm32f429-discovery_defconfig @@ -1,3 +1,3 @@ CONFIG_ARM=y CONFIG_TARGET_STM32F429_DISCOVERY=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/stv0991_defconfig b/configs/stv0991_defconfig index 425bcfb..8e8ce9f 100644 --- a/configs/stv0991_defconfig +++ b/configs/stv0991_defconfig @@ -6,6 +6,9 @@ CONFIG_SYS_EXTRA_OPTIONS="stv0991" CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/stxgp3_defconfig b/configs/stxgp3_defconfig index 63d97cc..86afe88 100644 --- a/configs/stxgp3_defconfig +++ b/configs/stxgp3_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_STXGP3=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/stxssa_4M_defconfig b/configs/stxssa_4M_defconfig index 4e81488..7547906 100644 --- a/configs/stxssa_4M_defconfig +++ b/configs/stxssa_4M_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_STXSSA=y CONFIG_SYS_EXTRA_OPTIONS="STXSSA_4M" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/stxssa_defconfig b/configs/stxssa_defconfig index e46febe..c072417 100644 --- a/configs/stxssa_defconfig +++ b/configs/stxssa_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_STXSSA=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/sunxi_Gemei_G9_defconfig b/configs/sunxi_Gemei_G9_defconfig index dfd1b5d..e95cbe4 100644 --- a/configs/sunxi_Gemei_G9_defconfig +++ b/configs/sunxi_Gemei_G9_defconfig @@ -12,10 +12,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-gemei-g9" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_DM_ETH=y -CONFIG_NETDEVICES=y CONFIG_DM_SERIAL=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/suvd3_defconfig b/configs/suvd3_defconfig index 174ed9e..e477b0e 100644 --- a/configs/suvd3_defconfig +++ b/configs/suvd3_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_SUVD3=y CONFIG_SYS_EXTRA_OPTIONS="SUVD3" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/sycamore_defconfig b/configs/sycamore_defconfig index f49007b..844e67f 100644 --- a/configs/sycamore_defconfig +++ b/configs/sycamore_defconfig @@ -1,5 +1,3 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_WALNUT=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/t3corp_defconfig b/configs/t3corp_defconfig index fc80d1f..c61508a 100644 --- a/configs/t3corp_defconfig +++ b/configs/t3corp_defconfig @@ -1,5 +1,3 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_T3CORP=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/taihu_defconfig b/configs/taihu_defconfig index 3581648..ac83725 100644 --- a/configs/taihu_defconfig +++ b/configs/taihu_defconfig @@ -1,5 +1,3 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_TAIHU=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/taishan_defconfig b/configs/taishan_defconfig index eddb981..e956c6f 100644 --- a/configs/taishan_defconfig +++ b/configs/taishan_defconfig @@ -1,5 +1,3 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_TAISHAN=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/tao3530_defconfig b/configs/tao3530_defconfig index ce45fba..ae4b49b 100644 --- a/configs/tao3530_defconfig +++ b/configs/tao3530_defconfig @@ -2,4 +2,8 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_TAO3530=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig index f02c442..3787493 100644 --- a/configs/taurus_defconfig +++ b/configs/taurus_defconfig @@ -3,5 +3,11 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_TAURUS=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/tb100_defconfig b/configs/tb100_defconfig index c94118a..cc8f527 100644 --- a/configs/tb100_defconfig +++ b/configs/tb100_defconfig @@ -4,7 +4,9 @@ CONFIG_TARGET_TB100=y CONFIG_SYS_CLK_FREQ=500000000 CONFIG_SYS_TEXT_BASE=0x84000000 CONFIG_DEFAULT_DEVICE_TREE="abilis_tb100" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_DM=y diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig index 3e720a7..bb14026 100644 --- a/configs/tbs2910_defconfig +++ b/configs/tbs2910_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y CONFIG_TARGET_TBS2910=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set diff --git a/configs/tcm-bf518_defconfig b/configs/tcm-bf518_defconfig index c362868..26da180 100644 --- a/configs/tcm-bf518_defconfig +++ b/configs/tcm-bf518_defconfig @@ -1,5 +1,5 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_TCM_BF518=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/tcm-bf537_defconfig b/configs/tcm-bf537_defconfig index 5267faf..8933625 100644 --- a/configs/tcm-bf537_defconfig +++ b/configs/tcm-bf537_defconfig @@ -1,5 +1,5 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_TCM_BF537=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NET_RANDOM_ETHADDR=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/tec-ng_defconfig b/configs/tec-ng_defconfig index 99252df..e731205 100644 --- a/configs/tec-ng_defconfig +++ b/configs/tec-ng_defconfig @@ -3,7 +3,12 @@ CONFIG_TEGRA=y CONFIG_TEGRA30=y CONFIG_TARGET_TEC_NG=y CONFIG_DEFAULT_DEVICE_TREE="tegra30-tec-ng" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_SPL_DM=y CONFIG_SPI_FLASH=y CONFIG_USB=y diff --git a/configs/tec_defconfig b/configs/tec_defconfig index d1fd04b..3f815fe 100644 --- a/configs/tec_defconfig +++ b/configs/tec_defconfig @@ -3,7 +3,12 @@ CONFIG_TEGRA=y CONFIG_TEGRA20=y CONFIG_TARGET_TEC=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-tec" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_SPL_DM=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/thuban_defconfig b/configs/thuban_defconfig index 7f9afc8..8192b28 100644 --- a/configs/thuban_defconfig +++ b/configs/thuban_defconfig @@ -4,5 +4,7 @@ CONFIG_SPL=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/ti814x_evm_defconfig b/configs/ti814x_evm_defconfig index 4928cba..ade4ea2 100644 --- a/configs/ti814x_evm_defconfig +++ b/configs/ti814x_evm_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_TI814X_EVM=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/ti816x_evm_defconfig b/configs/ti816x_evm_defconfig index 57fcf52..67e5e60 100644 --- a/configs/ti816x_evm_defconfig +++ b/configs/ti816x_evm_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_TI816X_EVM=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/titanium_defconfig b/configs/titanium_defconfig index 554daac..e892d3e 100644 --- a/configs/titanium_defconfig +++ b/configs/titanium_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_TITANIUM=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/barco/titanium/imximage.cfg" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/tk71_defconfig b/configs/tk71_defconfig index 195bdcc..5e2a0b8 100644 --- a/configs/tk71_defconfig +++ b/configs/tk71_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_TK71=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/tqma6q_mba6_mmc_defconfig b/configs/tqma6q_mba6_mmc_defconfig index b8022aa..ceb3386 100644 --- a/configs/tqma6q_mba6_mmc_defconfig +++ b/configs/tqma6q_mba6_mmc_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_TQMA6=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/tqc/tqma6/tqma6q.cfg,MX6Q,MBA6,TQMA6X_MMC_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/tqma6q_mba6_spi_defconfig b/configs/tqma6q_mba6_spi_defconfig index 321ebea..e413ef4 100644 --- a/configs/tqma6q_mba6_spi_defconfig +++ b/configs/tqma6q_mba6_spi_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_TQMA6=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/tqc/tqma6/tqma6q.cfg,MX6Q,MBA6,TQMA6X_SPI_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/tqma6s_mba6_mmc_defconfig b/configs/tqma6s_mba6_mmc_defconfig index dca194a..6c37b4f 100644 --- a/configs/tqma6s_mba6_mmc_defconfig +++ b/configs/tqma6s_mba6_mmc_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_TQMA6=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/tqc/tqma6/tqma6s.cfg,MX6S,MBA6,TQMA6X_MMC_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/tqma6s_mba6_spi_defconfig b/configs/tqma6s_mba6_spi_defconfig index f0c4fe9..af7853f 100644 --- a/configs/tqma6s_mba6_spi_defconfig +++ b/configs/tqma6s_mba6_spi_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_TQMA6=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/tqc/tqma6/tqma6s.cfg,MX6S,MBA6,TQMA6X_SPI_BOOT" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y diff --git a/configs/trats2_defconfig b/configs/trats2_defconfig index a991645..f3cbe6d 100644 --- a/configs/trats2_defconfig +++ b/configs/trats2_defconfig @@ -3,7 +3,12 @@ CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_TRATS2=y CONFIG_DEFAULT_DEVICE_TREE="exynos4412-trats2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_CMD_SETEXPR=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set CONFIG_OF_CONTROL=y CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_USB=y diff --git a/configs/trats_defconfig b/configs/trats_defconfig index d3aedbd..6553edb 100644 --- a/configs/trats_defconfig +++ b/configs/trats_defconfig @@ -2,7 +2,12 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_TRATS=y CONFIG_DEFAULT_DEVICE_TREE="exynos4210-trats" -CONFIG_CMD_SETEXPR=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set CONFIG_OF_CONTROL=y CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_USB=y diff --git a/configs/tricorder_defconfig b/configs/tricorder_defconfig index a710804..cbd4dd3 100644 --- a/configs/tricorder_defconfig +++ b/configs/tricorder_defconfig @@ -2,3 +2,10 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_TRICORDER=y CONFIG_SPL=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/tricorder_flash_defconfig b/configs/tricorder_flash_defconfig index c00bffe..4619fc9 100644 --- a/configs/tricorder_flash_defconfig +++ b/configs/tricorder_flash_defconfig @@ -3,3 +3,10 @@ CONFIG_OMAP34XX=y CONFIG_TARGET_TRICORDER=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="FLASHCARD" +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/trimslice_defconfig b/configs/trimslice_defconfig index 51137c3..9d2fb2d 100644 --- a/configs/trimslice_defconfig +++ b/configs/trimslice_defconfig @@ -3,7 +3,12 @@ CONFIG_TEGRA=y CONFIG_TEGRA20=y CONFIG_TARGET_TRIMSLICE=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-trimslice" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_SPL_DM=y CONFIG_SPI_FLASH=y CONFIG_USB=y diff --git a/configs/trizepsiv_defconfig b/configs/trizepsiv_defconfig index 327677e..1887983 100644 --- a/configs/trizepsiv_defconfig +++ b/configs/trizepsiv_defconfig @@ -1,3 +1,3 @@ CONFIG_ARM=y CONFIG_TARGET_TRIZEPSIV=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/tseries_mmc_defconfig b/configs/tseries_mmc_defconfig index a5c8511..9ed13b6 100644 --- a/configs/tseries_mmc_defconfig +++ b/configs/tseries_mmc_defconfig @@ -2,5 +2,15 @@ CONFIG_ARM=y CONFIG_TARGET_TSERIES=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT" +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set # CONFIG_CMD_CRC32 is not set -CONFIG_CMD_NET=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/tseries_nand_defconfig b/configs/tseries_nand_defconfig index 9b738db..0b577edc 100644 --- a/configs/tseries_nand_defconfig +++ b/configs/tseries_nand_defconfig @@ -2,5 +2,15 @@ CONFIG_ARM=y CONFIG_TARGET_TSERIES=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set # CONFIG_CMD_CRC32 is not set -CONFIG_CMD_NET=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/tseries_spi_defconfig b/configs/tseries_spi_defconfig index 92d49eb..1602a43 100644 --- a/configs/tseries_spi_defconfig +++ b/configs/tseries_spi_defconfig @@ -2,6 +2,16 @@ CONFIG_ARM=y CONFIG_TARGET_TSERIES=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT" +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set # CONFIG_CMD_CRC32 is not set -CONFIG_CMD_NET=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_SPI_FLASH=y diff --git a/configs/tt01_defconfig b/configs/tt01_defconfig index 58cd9f9..d23904d 100644 --- a/configs/tt01_defconfig +++ b/configs/tt01_defconfig @@ -1,3 +1,3 @@ CONFIG_ARM=y CONFIG_TARGET_TT01=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/tuge1_defconfig b/configs/tuge1_defconfig index 92fd767..d4a422c 100644 --- a/configs/tuge1_defconfig +++ b/configs/tuge1_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_TUXX1=y CONFIG_SYS_EXTRA_OPTIONS="TUGE1" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/tuxx1_defconfig b/configs/tuxx1_defconfig index a08412e..c8db21a 100644 --- a/configs/tuxx1_defconfig +++ b/configs/tuxx1_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_TUXX1=y CONFIG_SYS_EXTRA_OPTIONS="TUXX1" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/twister_defconfig b/configs/twister_defconfig index 495ec3a..7381665 100644 --- a/configs/twister_defconfig +++ b/configs/twister_defconfig @@ -2,4 +2,6 @@ CONFIG_ARM=y CONFIG_OMAP34XX=y CONFIG_TARGET_TWISTER=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/tx25_defconfig b/configs/tx25_defconfig index 9257361..b752414 100644 --- a/configs/tx25_defconfig +++ b/configs/tx25_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_TX25=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/u8500_href_defconfig b/configs/u8500_href_defconfig index fef179f..5a82ca8 100644 --- a/configs/u8500_href_defconfig +++ b/configs/u8500_href_defconfig @@ -1,2 +1,12 @@ CONFIG_ARM=y CONFIG_TARGET_U8500_HREF=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/udoo_quad_defconfig b/configs/udoo_quad_defconfig index 17f48c8..42c21c6 100644 --- a/configs/udoo_quad_defconfig +++ b/configs/udoo_quad_defconfig @@ -1,5 +1,5 @@ CONFIG_ARM=y CONFIG_TARGET_UDOO=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/udoo/udoo.cfg,MX6Q,DDR_MB=1024" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set diff --git a/configs/usb_a9263_dataflash_defconfig b/configs/usb_a9263_dataflash_defconfig index 12fc468..5f3974e 100644 --- a/configs/usb_a9263_dataflash_defconfig +++ b/configs/usb_a9263_dataflash_defconfig @@ -2,4 +2,11 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_USB_A9263=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/usbarmory_defconfig b/configs/usbarmory_defconfig index 75781ed..c25d103 100644 --- a/configs/usbarmory_defconfig +++ b/configs/usbarmory_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y CONFIG_ARCH_MX5=y CONFIG_TARGET_USBARMORY=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/v38b_defconfig b/configs/v38b_defconfig index d0f3ae6..cc3d802 100644 --- a/configs/v38b_defconfig +++ b/configs/v38b_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC5xxx=y CONFIG_TARGET_V38B=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/v5fx30teval_defconfig b/configs/v5fx30teval_defconfig index 42e0438..8173f3e 100644 --- a/configs/v5fx30teval_defconfig +++ b/configs/v5fx30teval_defconfig @@ -2,3 +2,7 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_V5FX30TEVAL=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1,INIT_TLB=board/xilinx/ppc440-generic/init.o" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/v5fx30teval_flash_defconfig b/configs/v5fx30teval_flash_defconfig index 495f3b9..b9b05e8 100644 --- a/configs/v5fx30teval_flash_defconfig +++ b/configs/v5fx30teval_flash_defconfig @@ -2,3 +2,7 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_V5FX30TEVAL=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC,INIT_TLB=board/xilinx/ppc440-generic/init.o" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/vct_platinum_defconfig b/configs/vct_platinum_defconfig index 89369e2..81cf280 100644 --- a/configs/vct_platinum_defconfig +++ b/configs/vct_platinum_defconfig @@ -1,5 +1,5 @@ CONFIG_MIPS=y CONFIG_TARGET_VCT=y CONFIG_VCT_PLATINUM=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/vct_platinum_onenand_defconfig b/configs/vct_platinum_onenand_defconfig index de10b76..8d91aa5 100644 --- a/configs/vct_platinum_onenand_defconfig +++ b/configs/vct_platinum_onenand_defconfig @@ -2,5 +2,7 @@ CONFIG_MIPS=y CONFIG_TARGET_VCT=y CONFIG_VCT_PLATINUM=y CONFIG_VCT_ONENAND=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/vct_platinum_onenand_small_defconfig b/configs/vct_platinum_onenand_small_defconfig index 053c825..6eaec0c 100644 --- a/configs/vct_platinum_onenand_small_defconfig +++ b/configs/vct_platinum_onenand_small_defconfig @@ -3,5 +3,17 @@ CONFIG_TARGET_VCT=y CONFIG_VCT_PLATINUM=y CONFIG_VCT_ONENAND=y CONFIG_VCT_SMALL_IMAGE=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_IMLS is not set # CONFIG_CMD_CRC32 is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/vct_platinum_small_defconfig b/configs/vct_platinum_small_defconfig index 69053fb..088ab7e 100644 --- a/configs/vct_platinum_small_defconfig +++ b/configs/vct_platinum_small_defconfig @@ -2,5 +2,15 @@ CONFIG_MIPS=y CONFIG_TARGET_VCT=y CONFIG_VCT_PLATINUM=y CONFIG_VCT_SMALL_IMAGE=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_CRC32 is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/vct_platinumavc_defconfig b/configs/vct_platinumavc_defconfig index 32685d5..faeb6a2 100644 --- a/configs/vct_platinumavc_defconfig +++ b/configs/vct_platinumavc_defconfig @@ -1,4 +1,7 @@ CONFIG_MIPS=y CONFIG_TARGET_VCT=y CONFIG_VCT_PLATINUMAVC=y +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/vct_platinumavc_onenand_defconfig b/configs/vct_platinumavc_onenand_defconfig index eebaf2c..900a626 100644 --- a/configs/vct_platinumavc_onenand_defconfig +++ b/configs/vct_platinumavc_onenand_defconfig @@ -2,4 +2,9 @@ CONFIG_MIPS=y CONFIG_TARGET_VCT=y CONFIG_VCT_PLATINUMAVC=y CONFIG_VCT_ONENAND=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/vct_platinumavc_onenand_small_defconfig b/configs/vct_platinumavc_onenand_small_defconfig index 9a7cc94..e9928a0 100644 --- a/configs/vct_platinumavc_onenand_small_defconfig +++ b/configs/vct_platinumavc_onenand_small_defconfig @@ -3,5 +3,17 @@ CONFIG_TARGET_VCT=y CONFIG_VCT_PLATINUMAVC=y CONFIG_VCT_ONENAND=y CONFIG_VCT_SMALL_IMAGE=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_IMLS is not set # CONFIG_CMD_CRC32 is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/vct_platinumavc_small_defconfig b/configs/vct_platinumavc_small_defconfig index 3aba19d..719bd64 100644 --- a/configs/vct_platinumavc_small_defconfig +++ b/configs/vct_platinumavc_small_defconfig @@ -2,5 +2,15 @@ CONFIG_MIPS=y CONFIG_TARGET_VCT=y CONFIG_VCT_PLATINUMAVC=y CONFIG_VCT_SMALL_IMAGE=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_CRC32 is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/vct_premium_defconfig b/configs/vct_premium_defconfig index 50108eb..7b04e7c 100644 --- a/configs/vct_premium_defconfig +++ b/configs/vct_premium_defconfig @@ -1,5 +1,5 @@ CONFIG_MIPS=y CONFIG_TARGET_VCT=y CONFIG_VCT_PREMIUM=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/vct_premium_onenand_defconfig b/configs/vct_premium_onenand_defconfig index 1241630..769f8bd 100644 --- a/configs/vct_premium_onenand_defconfig +++ b/configs/vct_premium_onenand_defconfig @@ -2,5 +2,7 @@ CONFIG_MIPS=y CONFIG_TARGET_VCT=y CONFIG_VCT_PREMIUM=y CONFIG_VCT_ONENAND=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/vct_premium_onenand_small_defconfig b/configs/vct_premium_onenand_small_defconfig index 46f3dc4..c062a01 100644 --- a/configs/vct_premium_onenand_small_defconfig +++ b/configs/vct_premium_onenand_small_defconfig @@ -3,5 +3,17 @@ CONFIG_TARGET_VCT=y CONFIG_VCT_PREMIUM=y CONFIG_VCT_ONENAND=y CONFIG_VCT_SMALL_IMAGE=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_IMLS is not set # CONFIG_CMD_CRC32 is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/vct_premium_small_defconfig b/configs/vct_premium_small_defconfig index ccd06c0..4a5cdb0 100644 --- a/configs/vct_premium_small_defconfig +++ b/configs/vct_premium_small_defconfig @@ -2,5 +2,15 @@ CONFIG_MIPS=y CONFIG_TARGET_VCT=y CONFIG_VCT_PREMIUM=y CONFIG_VCT_SMALL_IMAGE=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_CRC32 is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/ve8313_defconfig b/configs/ve8313_defconfig index 9bfd4bb..627bb3c 100644 --- a/configs/ve8313_defconfig +++ b/configs/ve8313_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_VE8313=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/venice2_defconfig b/configs/venice2_defconfig index 3fab99c..9ccd739 100644 --- a/configs/venice2_defconfig +++ b/configs/venice2_defconfig @@ -3,7 +3,12 @@ CONFIG_TEGRA=y CONFIG_TEGRA124=y CONFIG_TARGET_VENICE2=y CONFIG_DEFAULT_DEVICE_TREE="tegra124-venice2" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_SPL_DM=y CONFIG_SPI_FLASH=y CONFIG_USB=y diff --git a/configs/ventana_defconfig b/configs/ventana_defconfig index 0a6e10f..f728585 100644 --- a/configs/ventana_defconfig +++ b/configs/ventana_defconfig @@ -3,7 +3,12 @@ CONFIG_TEGRA=y CONFIG_TEGRA20=y CONFIG_TARGET_VENTANA=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-ventana" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_SPL_DM=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/versatileab_defconfig b/configs/versatileab_defconfig index f4ff591..765fe6e 100644 --- a/configs/versatileab_defconfig +++ b/configs/versatileab_defconfig @@ -1,4 +1,19 @@ CONFIG_ARM=y CONFIG_ARCH_VERSATILE=y CONFIG_SYS_EXTRA_OPTIONS="ARCH_VERSATILE_AB" -CONFIG_CMD_NET=y +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set diff --git a/configs/versatilepb_defconfig b/configs/versatilepb_defconfig index 54b5129..1973c38 100644 --- a/configs/versatilepb_defconfig +++ b/configs/versatilepb_defconfig @@ -1,4 +1,19 @@ CONFIG_ARM=y CONFIG_ARCH_VERSATILE=y CONFIG_SYS_EXTRA_OPTIONS="ARCH_VERSATILE_PB" -CONFIG_CMD_NET=y +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set diff --git a/configs/versatileqemu_defconfig b/configs/versatileqemu_defconfig index 7d6c4e1..ea9c5b9 100644 --- a/configs/versatileqemu_defconfig +++ b/configs/versatileqemu_defconfig @@ -1,4 +1,19 @@ CONFIG_ARM=y CONFIG_ARCH_VERSATILE=y CONFIG_SYS_EXTRA_OPTIONS="ARCH_VERSATILE_QEMU,ARCH_VERSATILE_PB" -CONFIG_CMD_NET=y +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SOURCE is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set diff --git a/configs/vexpress_aemv8a_juno_defconfig b/configs/vexpress_aemv8a_juno_defconfig index cd1e6db..0baaa91 100644 --- a/configs/vexpress_aemv8a_juno_defconfig +++ b/configs/vexpress_aemv8a_juno_defconfig @@ -2,6 +2,16 @@ CONFIG_ARM=y CONFIG_TARGET_VEXPRESS64_JUNO=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_DEFAULT_DEVICE_TREE="vexpress64" -CONFIG_CMD_NET=y +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set CONFIG_DM=y CONFIG_DM_SERIAL=y diff --git a/configs/vexpress_aemv8a_semi_defconfig b/configs/vexpress_aemv8a_semi_defconfig index 395ffa6..bf5576a 100644 --- a/configs/vexpress_aemv8a_semi_defconfig +++ b/configs/vexpress_aemv8a_semi_defconfig @@ -2,6 +2,17 @@ CONFIG_ARM=y CONFIG_TARGET_VEXPRESS64_BASE_FVP=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_DEFAULT_DEVICE_TREE="vexpress64" -CONFIG_CMD_NET=y +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set CONFIG_DM=y CONFIG_DM_SERIAL=y diff --git a/configs/vexpress_ca15_tc2_defconfig b/configs/vexpress_ca15_tc2_defconfig index 401317f..a3ff78a 100644 --- a/configs/vexpress_ca15_tc2_defconfig +++ b/configs/vexpress_ca15_tc2_defconfig @@ -1,3 +1,16 @@ CONFIG_ARM=y CONFIG_TARGET_VEXPRESS_CA15_TC2=y -CONFIG_CMD_NET=y +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set diff --git a/configs/vexpress_ca5x2_defconfig b/configs/vexpress_ca5x2_defconfig index d6286af..ce5da91 100644 --- a/configs/vexpress_ca5x2_defconfig +++ b/configs/vexpress_ca5x2_defconfig @@ -1,3 +1,16 @@ CONFIG_ARM=y CONFIG_TARGET_VEXPRESS_CA5X2=y -CONFIG_CMD_NET=y +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set diff --git a/configs/vexpress_ca9x4_defconfig b/configs/vexpress_ca9x4_defconfig index b8e938c..2947fc1 100644 --- a/configs/vexpress_ca9x4_defconfig +++ b/configs/vexpress_ca9x4_defconfig @@ -1,3 +1,16 @@ CONFIG_ARM=y CONFIG_TARGET_VEXPRESS_CA9X4=y -CONFIG_CMD_NET=y +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ECHO is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set +# CONFIG_CMD_MISC is not set diff --git a/configs/vf610twr_defconfig b/configs/vf610twr_defconfig index 3955ee0..dc8df5c 100644 --- a/configs/vf610twr_defconfig +++ b/configs/vf610twr_defconfig @@ -1,7 +1,8 @@ CONFIG_ARM=y CONFIG_TARGET_VF610TWR=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_IS_IN_MMC" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_NAND_VF610_NFC=y CONFIG_SYS_NAND_BUSWIDTH_16BIT=y CONFIG_SPI_FLASH=y diff --git a/configs/vf610twr_nand_defconfig b/configs/vf610twr_nand_defconfig index 98f1aa7..98880f3 100644 --- a/configs/vf610twr_nand_defconfig +++ b/configs/vf610twr_nand_defconfig @@ -1,7 +1,8 @@ CONFIG_ARM=y CONFIG_TARGET_VF610TWR=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_IS_IN_NAND" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_NAND_VF610_NFC=y CONFIG_SYS_NAND_BUSWIDTH_16BIT=y CONFIG_SPI_FLASH=y diff --git a/configs/vision2_defconfig b/configs/vision2_defconfig index 94df0d1..afe3b3c 100644 --- a/configs/vision2_defconfig +++ b/configs/vision2_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_VISION2=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/ttcontrol/vision2/imximage_hynix.cfg" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y diff --git a/configs/vl_ma2sc_defconfig b/configs/vl_ma2sc_defconfig index eab4019..7a66783 100644 --- a/configs/vl_ma2sc_defconfig +++ b/configs/vl_ma2sc_defconfig @@ -1,4 +1,8 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_VL_MA2SC=y -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/vl_ma2sc_ram_defconfig b/configs/vl_ma2sc_ram_defconfig index 6ffbf88..43a576f 100644 --- a/configs/vl_ma2sc_ram_defconfig +++ b/configs/vl_ma2sc_ram_defconfig @@ -2,4 +2,8 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_VL_MA2SC=y CONFIG_SYS_EXTRA_OPTIONS="RAMLOAD" -CONFIG_CMD_NET=y +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/vme8349_defconfig b/configs/vme8349_defconfig index 1f9a469..117a154 100644 --- a/configs/vme8349_defconfig +++ b/configs/vme8349_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC83xx=y CONFIG_TARGET_VME8349=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/vpac270_nor_128_defconfig b/configs/vpac270_nor_128_defconfig index 6c40f1e..bbc6e6a 100644 --- a/configs/vpac270_nor_128_defconfig +++ b/configs/vpac270_nor_128_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y CONFIG_TARGET_VPAC270=y CONFIG_SYS_EXTRA_OPTIONS="NOR,RAM_128M" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/vpac270_nor_256_defconfig b/configs/vpac270_nor_256_defconfig index 74b9473..3f1ae1e 100644 --- a/configs/vpac270_nor_256_defconfig +++ b/configs/vpac270_nor_256_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y CONFIG_TARGET_VPAC270=y CONFIG_SYS_EXTRA_OPTIONS="NOR,RAM_256M" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/vpac270_ond_256_defconfig b/configs/vpac270_ond_256_defconfig index c8a3158..7500b7c 100644 --- a/configs/vpac270_ond_256_defconfig +++ b/configs/vpac270_ond_256_defconfig @@ -2,4 +2,6 @@ CONFIG_ARM=y CONFIG_TARGET_VPAC270=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="ONENAND,RAM_256M" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/walnut_defconfig b/configs/walnut_defconfig index f49007b..844e67f 100644 --- a/configs/walnut_defconfig +++ b/configs/walnut_defconfig @@ -1,5 +1,3 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_WALNUT=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/wandboard_defconfig b/configs/wandboard_defconfig index eaa5962..62666ff 100644 --- a/configs/wandboard_defconfig +++ b/configs/wandboard_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_TARGET_WANDBOARD=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set CONFIG_DM=y CONFIG_DM_THERMAL=y diff --git a/configs/warp_defconfig b/configs/warp_defconfig index 24e1b9f..dacb432 100644 --- a/configs/warp_defconfig +++ b/configs/warp_defconfig @@ -1,3 +1,8 @@ CONFIG_ARM=y CONFIG_TARGET_WARP=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/whistler_defconfig b/configs/whistler_defconfig index f7f822b..43d725b 100644 --- a/configs/whistler_defconfig +++ b/configs/whistler_defconfig @@ -3,7 +3,12 @@ CONFIG_TEGRA=y CONFIG_TEGRA20=y CONFIG_TARGET_WHISTLER=y CONFIG_DEFAULT_DEVICE_TREE="tegra20-whistler" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set CONFIG_SPL_DM=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/wireless_space_defconfig b/configs/wireless_space_defconfig index 766552c..5551d27 100644 --- a/configs/wireless_space_defconfig +++ b/configs/wireless_space_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_KIRKWOOD=y CONFIG_TARGET_WIRELESS_SPACE=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/woodburn_defconfig b/configs/woodburn_defconfig index 80aa753..8dcf3e1 100644 --- a/configs/woodburn_defconfig +++ b/configs/woodburn_defconfig @@ -1,3 +1,3 @@ CONFIG_ARM=y CONFIG_TARGET_WOODBURN=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/woodburn_sd_defconfig b/configs/woodburn_sd_defconfig index 26502fd..96a00b3 100644 --- a/configs/woodburn_sd_defconfig +++ b/configs/woodburn_sd_defconfig @@ -2,4 +2,4 @@ CONFIG_ARM=y CONFIG_TARGET_WOODBURN_SD=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/woodburn/imximage.cfg" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/work_92105_defconfig b/configs/work_92105_defconfig index e71db29..2d3d9f3 100644 --- a/configs/work_92105_defconfig +++ b/configs/work_92105_defconfig @@ -1,6 +1,8 @@ CONFIG_ARM=y CONFIG_TARGET_WORK_92105=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_DM=y CONFIG_DM_GPIO=y diff --git a/configs/wtk_defconfig b/configs/wtk_defconfig index a52db30..7d4f754 100644 --- a/configs/wtk_defconfig +++ b/configs/wtk_defconfig @@ -2,4 +2,4 @@ CONFIG_PPC=y CONFIG_8xx=y CONFIG_TARGET_TQM823L=y CONFIG_SYS_EXTRA_OPTIONS="LCD,SHARP_LQ065T9DR51U" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/x600_defconfig b/configs/x600_defconfig index f8b0340..fdd4d3b 100644 --- a/configs/x600_defconfig +++ b/configs/x600_defconfig @@ -4,6 +4,6 @@ CONFIG_SPL=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_NETDEVICES=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/xaeniax_defconfig b/configs/xaeniax_defconfig index ada03f4..8634cc7 100644 --- a/configs/xaeniax_defconfig +++ b/configs/xaeniax_defconfig @@ -1,3 +1,3 @@ CONFIG_ARM=y CONFIG_TARGET_XAENIAX=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/xfi3_defconfig b/configs/xfi3_defconfig index ec79cc6..90927ed 100644 --- a/configs/xfi3_defconfig +++ b/configs/xfi3_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_XFI3=y CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/xilinx-ppc405-generic_defconfig b/configs/xilinx-ppc405-generic_defconfig index f4ed6d1..9dae755 100644 --- a/configs/xilinx-ppc405-generic_defconfig +++ b/configs/xilinx-ppc405-generic_defconfig @@ -2,3 +2,7 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_XILINX_PPC405_GENERIC=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/xilinx-ppc405-generic_flash_defconfig b/configs/xilinx-ppc405-generic_flash_defconfig index 1b0311c..37084fb 100644 --- a/configs/xilinx-ppc405-generic_flash_defconfig +++ b/configs/xilinx-ppc405-generic_flash_defconfig @@ -2,3 +2,7 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_XILINX_PPC405_GENERIC=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/xilinx-ppc440-generic_defconfig b/configs/xilinx-ppc440-generic_defconfig index cac8785..398362b 100644 --- a/configs/xilinx-ppc440-generic_defconfig +++ b/configs/xilinx-ppc440-generic_defconfig @@ -2,3 +2,7 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_XILINX_PPC440_GENERIC=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/xilinx-ppc440-generic_flash_defconfig b/configs/xilinx-ppc440-generic_flash_defconfig index b271554..6299033 100644 --- a/configs/xilinx-ppc440-generic_flash_defconfig +++ b/configs/xilinx-ppc440-generic_flash_defconfig @@ -2,3 +2,7 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_XILINX_PPC440_GENERIC=y CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/xilinx_zynqmp_defconfig b/configs/xilinx_zynqmp_defconfig index c512e9c..1c64eea 100644 --- a/configs/xilinx_zynqmp_defconfig +++ b/configs/xilinx_zynqmp_defconfig @@ -1,14 +1,17 @@ CONFIG_ARM=y CONFIG_TARGET_XILINX_ZYNQMP=y CONFIG_DEFAULT_DEVICE_TREE="zynqmp" -CONFIG_CMD_BDI=y -CONFIG_CMD_BOOTD=y -CONFIG_CMD_RUN=y -CONFIG_CMD_IMI=y -CONFIG_CMD_SAVEENV=y -CONFIG_CMD_FLASH=y -CONFIG_CMD_ECHO=y -CONFIG_CMD_SOURCE=y +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_ITEST is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set CONFIG_CMD_TIME=y -CONFIG_CMD_MISC=y CONFIG_CMD_TIMER=y diff --git a/configs/xpedite1000_defconfig b/configs/xpedite1000_defconfig index af198b7..73d5ff2 100644 --- a/configs/xpedite1000_defconfig +++ b/configs/xpedite1000_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_XPEDITE1000=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/xpedite517x_defconfig b/configs/xpedite517x_defconfig index 3648745..45d0ae1 100644 --- a/configs/xpedite517x_defconfig +++ b/configs/xpedite517x_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC86xx=y CONFIG_TARGET_XPEDITE517X=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/xpedite520x_defconfig b/configs/xpedite520x_defconfig index 0dc106f..797c166 100644 --- a/configs/xpedite520x_defconfig +++ b/configs/xpedite520x_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_XPEDITE520X=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/xpedite537x_defconfig b/configs/xpedite537x_defconfig index 797df9f..2db7f65 100644 --- a/configs/xpedite537x_defconfig +++ b/configs/xpedite537x_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_XPEDITE537X=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/xpedite550x_defconfig b/configs/xpedite550x_defconfig index 712b285..2740957 100644 --- a/configs/xpedite550x_defconfig +++ b/configs/xpedite550x_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_XPEDITE550X=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/yellowstone_defconfig b/configs/yellowstone_defconfig index 816636f..7b1a630 100644 --- a/configs/yellowstone_defconfig +++ b/configs/yellowstone_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_YOSEMITE=y CONFIG_SYS_EXTRA_OPTIONS="YELLOWSTONE" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/yosemite_defconfig b/configs/yosemite_defconfig index 3456748..00ec425 100644 --- a/configs/yosemite_defconfig +++ b/configs/yosemite_defconfig @@ -2,5 +2,3 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_YOSEMITE=y CONFIG_SYS_EXTRA_OPTIONS="YOSEMITE" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/yucca_defconfig b/configs/yucca_defconfig index c0d0f45..6c8e20a 100644 --- a/configs/yucca_defconfig +++ b/configs/yucca_defconfig @@ -1,5 +1,3 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_YUCCA=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/zeus_defconfig b/configs/zeus_defconfig index 7524ca9..da2ff3c 100644 --- a/configs/zeus_defconfig +++ b/configs/zeus_defconfig @@ -1,4 +1,4 @@ CONFIG_PPC=y CONFIG_4xx=y CONFIG_TARGET_ZEUS=y -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/zipitz2_defconfig b/configs/zipitz2_defconfig index 8d921a0..3591849 100644 --- a/configs/zipitz2_defconfig +++ b/configs/zipitz2_defconfig @@ -1,2 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_ZIPITZ2=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set diff --git a/configs/zmx25_defconfig b/configs/zmx25_defconfig index a776f6a..a34e827 100644 --- a/configs/zmx25_defconfig +++ b/configs/zmx25_defconfig @@ -4,4 +4,4 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="boot in %d s\n" CONFIG_AUTOBOOT_DELAY_STR="delaygs" CONFIG_AUTOBOOT_STOP_STR="stopgs" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig index a7307cf..533cdb5 100644 --- a/configs/zynq_microzed_defconfig +++ b/configs/zynq_microzed_defconfig @@ -7,6 +7,8 @@ CONFIG_SPL=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y CONFIG_SPL_DISABLE_OF_CONTROL=y diff --git a/configs/zynq_picozed_defconfig b/configs/zynq_picozed_defconfig index ff023e6..af77a9d 100644 --- a/configs/zynq_picozed_defconfig +++ b/configs/zynq_picozed_defconfig @@ -3,4 +3,6 @@ CONFIG_ARCH_ZYNQ=y CONFIG_TARGET_ZYNQ_PICOZED=y CONFIG_DEFAULT_DEVICE_TREE="zynq-picozed" CONFIG_SPL=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig index 23850c8..2e40508 100644 --- a/configs/zynq_zc702_defconfig +++ b/configs/zynq_zc702_defconfig @@ -7,5 +7,7 @@ CONFIG_SPL=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig index 4d2e59c..7c3713e 100644 --- a/configs/zynq_zc706_defconfig +++ b/configs/zynq_zc706_defconfig @@ -7,5 +7,7 @@ CONFIG_SPL=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y diff --git a/configs/zynq_zc70x_defconfig b/configs/zynq_zc70x_defconfig index d3dce0f..41c04bb 100644 --- a/configs/zynq_zc70x_defconfig +++ b/configs/zynq_zc70x_defconfig @@ -7,6 +7,8 @@ CONFIG_SPL=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y CONFIG_SPL_DISABLE_OF_CONTROL=y diff --git a/configs/zynq_zc770_xm010_defconfig b/configs/zynq_zc770_xm010_defconfig index 69a1d8a..73b5854 100644 --- a/configs/zynq_zc770_xm010_defconfig +++ b/configs/zynq_zc770_xm010_defconfig @@ -8,7 +8,9 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM010" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_SPI_FLASH=y diff --git a/configs/zynq_zc770_xm012_defconfig b/configs/zynq_zc770_xm012_defconfig index 311d686..0d5c77e 100644 --- a/configs/zynq_zc770_xm012_defconfig +++ b/configs/zynq_zc770_xm012_defconfig @@ -8,6 +8,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM012" -CONFIG_CMD_NET=y +# CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y CONFIG_SPL_DISABLE_OF_CONTROL=y diff --git a/configs/zynq_zc770_xm013_defconfig b/configs/zynq_zc770_xm013_defconfig index 5c51c68..8d320a1 100644 --- a/configs/zynq_zc770_xm013_defconfig +++ b/configs/zynq_zc770_xm013_defconfig @@ -8,6 +8,8 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM013" -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y CONFIG_SPL_DISABLE_OF_CONTROL=y diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig index 8637c0f..9f37849 100644 --- a/configs/zynq_zed_defconfig +++ b/configs/zynq_zed_defconfig @@ -7,6 +7,8 @@ CONFIG_SPL=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y CONFIG_SPL_DISABLE_OF_CONTROL=y diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig index fcfd543..e25573b 100644 --- a/configs/zynq_zybo_defconfig +++ b/configs/zynq_zybo_defconfig @@ -7,6 +7,8 @@ CONFIG_SPL=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y -CONFIG_CMD_NET=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y CONFIG_SPL_DISABLE_OF_CONTROL=y diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 973258a..ce76a02 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -11,6 +11,7 @@ config DM_ETH menuconfig NETDEVICES bool "Network device support" depends on NET + default y if DM_ETH help You must select Y to enable any network device support Generally if you have any networking support this is a given diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h index 4d9f63d..4c46dda 100644 --- a/include/config_cmd_all.h +++ b/include/config_cmd_all.h @@ -15,58 +15,43 @@ #define CONFIG_CMD_AMBAPP /* AMBA Plug & Play Bus print utility */ #define CONFIG_CMD_ASKENV /* ask for env variable */ -#define CONFIG_CMD_BDI /* bdinfo */ #define CONFIG_CMD_BEDBUG /* Include BedBug Debugger */ #define CONFIG_CMD_BMP /* BMP support */ -#define CONFIG_CMD_BOOTD /* bootd */ #define CONFIG_CMD_BOOTZ /* boot zImage */ #define CONFIG_CMD_BSP /* Board Specific functions */ #define CONFIG_CMD_CACHE /* icache, dcache */ #define CONFIG_CMD_CDP /* Cisco Discovery Protocol */ #define CONFIG_CMD_CLK /* Clock support */ -#define CONFIG_CMD_CONSOLE /* coninfo */ #define CONFIG_CMD_DATE /* support for RTC, date/time...*/ #define CONFIG_CMD_DHCP /* DHCP Support */ #define CONFIG_CMD_DIAG /* Diagnostics */ #define CONFIG_CMD_DISPLAY /* Display support */ #define CONFIG_CMD_DOC /* Disk-On-Chip Support */ #define CONFIG_CMD_DTT /* Digital Therm and Thermostat */ -#define CONFIG_CMD_ECHO /* echo arguments */ -#define CONFIG_CMD_EDITENV /* editenv */ #define CONFIG_CMD_EEPROM /* EEPROM read/write support */ #define CONFIG_CMD_ELF /* ELF (VxWorks) load/boot cmd */ #define CONFIG_CMD_EXT2 /* EXT2 Support */ #define CONFIG_CMD_FAT /* FAT support */ #define CONFIG_CMD_FDC /* Floppy Disk Support */ -#define CONFIG_CMD_FLASH /* flinfo, erase, protect */ -#define CONFIG_CMD_FPGA /* FPGA configuration Support */ #define CONFIG_CMD_FUSE /* Device fuse support */ #define CONFIG_CMD_GETTIME /* Get time since boot */ #define CONFIG_CMD_HASH /* calculate hash / digest */ #define CONFIG_CMD_HWFLOW /* RTS/CTS hw flow control */ #define CONFIG_CMD_I2C /* I2C serial bus support */ #define CONFIG_CMD_IDE /* IDE harddisk support */ -#define CONFIG_CMD_IMI /* iminfo */ -#define CONFIG_CMD_IMLS /* List all found images */ #define CONFIG_CMD_IMMAP /* IMMR dump support */ #define CONFIG_CMD_IO /* Access to X86 IO space */ #define CONFIG_CMD_IRQ /* irqinfo */ -#define CONFIG_CMD_ITEST /* Integer (and string) test */ #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ #define CONFIG_CMD_KGDB /* kgdb */ #define CONFIG_CMD_LICENSE /* console license display */ -#define CONFIG_CMD_LOADB /* loadb */ -#define CONFIG_CMD_LOADS /* loads */ #define CONFIG_CMD_MEMINFO /* meminfo */ -#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop */ #define CONFIG_CMD_MEMTEST /* mtest */ #define CONFIG_CMD_MFSL /* FSL support for Microblaze */ #define CONFIG_CMD_MII /* MII support */ -#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/ #define CONFIG_CMD_MMC /* MMC support */ #define CONFIG_CMD_MTDPARTS /* mtd parts support */ #define CONFIG_CMD_NAND /* NAND support */ -#define CONFIG_CMD_NFS /* NFS support */ #define CONFIG_CMD_ONENAND /* OneNAND support */ #define CONFIG_CMD_PCI /* pciinfo */ #define CONFIG_CMD_PCMCIA /* PCMCIA support */ @@ -76,15 +61,11 @@ #define CONFIG_CMD_REISER /* Reiserfs support */ #define CONFIG_CMD_RARP /* rarpboot support */ #define CONFIG_CMD_READ /* Read data from partition */ -#define CONFIG_CMD_RUN /* run command in env variable */ #define CONFIG_CMD_SANDBOX /* sb command to access sandbox features */ -#define CONFIG_CMD_SAVEENV /* saveenv */ #define CONFIG_CMD_SAVES /* save S record dump */ #define CONFIG_CMD_SCSI /* SCSI Support */ #define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */ -#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ #define CONFIG_CMD_SNTP /* SNTP support */ -#define CONFIG_CMD_SOURCE /* "source" command support */ #define CONFIG_CMD_SPI /* SPI utility */ #define CONFIG_CMD_TERMINAL /* built-in Serial Terminal */ #define CONFIG_CMD_UBI /* UBI Support */ @@ -92,7 +73,6 @@ #define CONFIG_CMD_UNIVERSE /* Tundra Universe Support */ #define CONFIG_CMD_UNZIP /* unzip from memory to memory */ #define CONFIG_CMD_USB /* USB Support */ -#define CONFIG_CMD_XIMG /* Load part of Multi Image */ #define CONFIG_CMD_ZFS /* ZFS Support */ #endif /* _CONFIG_CMD_ALL_H */ diff --git a/include/config_cmd_default.h b/include/config_cmd_default.h deleted file mode 100644 index b915c2f..0000000 --- a/include/config_cmd_default.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright 2007 Freescale Semiconductor, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License Version 2. This file is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef _CONFIG_CMD_DEFAULT_H -#define _CONFIG_CMD_DEFAULT_H - -/* - * Alphabetical list of all commands that are configured by default. - * This is essentially all commands minus those that are considered - * "non-standard" for some reason (memory hogs, requires special - * hardware, not fully tested, etc.). - */ - -#define CONFIG_CMD_BDI /* bdinfo */ -#define CONFIG_CMD_BOOTD /* bootd */ -#define CONFIG_CMD_CONSOLE /* coninfo */ -#define CONFIG_CMD_ECHO /* echo arguments */ -#define CONFIG_CMD_EDITENV /* editenv */ -#define CONFIG_CMD_ENV_EXISTS /* query whether env variables exists */ -#define CONFIG_CMD_FPGA /* FPGA configuration Support */ -#define CONFIG_CMD_IMI /* iminfo */ -#define CONFIG_CMD_ITEST /* Integer (and string) test */ -#ifndef CONFIG_SYS_NO_FLASH -#define CONFIG_CMD_FLASH /* flinfo, erase, protect */ -#define CONFIG_CMD_IMLS /* List all found images */ -#endif -#define CONFIG_CMD_LOADB /* loadb */ -#define CONFIG_CMD_LOADS /* loads */ -#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop */ -#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/ -#define CONFIG_CMD_NFS /* NFS support */ -#define CONFIG_CMD_RUN /* run command in env variable */ -#define CONFIG_CMD_SAVEENV /* saveenv */ -#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ -#define CONFIG_CMD_SOURCE /* "source" command support */ -#define CONFIG_CMD_XIMG /* Load part of Multi Image */ - -#endif /* _CONFIG_CMD_DEFAULT_H */ diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 884e522..b396764 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -755,8 +755,6 @@ unsigned long get_board_ddr_clk(void); /* * Command line configuration. */ -#include - #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h index e2ad557..a7c9277 100644 --- a/include/configs/BSC9131RDB.h +++ b/include/configs/BSC9131RDB.h @@ -340,8 +340,6 @@ extern unsigned long get_sdram_size(void); /* * Command line configuration. */ -#include - #define CONFIG_CMD_DHCP #define CONFIG_CMD_ERRATA #define CONFIG_CMD_ELF diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index 869c195..e5cd267 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -580,8 +580,6 @@ combinations. this should be removed later /* * Command line configuration. */ -#include - #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h index 08aec84..2357809 100644 --- a/include/configs/C29XPCIE.h +++ b/include/configs/C29XPCIE.h @@ -495,8 +495,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ERRATA #define CONFIG_CMD_ELF #define CONFIG_CMD_IRQ diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h index 3ccb9a7..638a586 100644 --- a/include/configs/CPCI2DP.h +++ b/include/configs/CPCI2DP.h @@ -53,8 +53,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_PCI #define CONFIG_CMD_IRQ #define CONFIG_CMD_ELF @@ -62,7 +60,6 @@ #define CONFIG_CMD_BSP #define CONFIG_CMD_EEPROM -#undef CONFIG_CMD_NFS #undef CONFIG_WATCHDOG /* watchdog disabled */ diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index 019700d..9c25751 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -67,8 +67,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_DHCP #define CONFIG_CMD_PCI #define CONFIG_CMD_IRQ diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index 03fa5e6..a2468c3 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -22,14 +22,9 @@ #define CONFIG_WATCHDOG_TIMEOUT 5000 /* Command line configuration */ -#include - #define CONFIG_CMD_CACHE #define CONFIG_CMD_ELF -#define CONFIG_CMD_FLASH #undef CONFIG_CMD_I2C -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC #define CONFIG_CMD_MII #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h index fb5b4f5..2e86016 100644 --- a/include/configs/M52277EVB.h +++ b/include/configs/M52277EVB.h @@ -37,19 +37,11 @@ #define CONFIG_BOOTP_HOSTNAME /* Command line configuration */ -#include - #define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE #define CONFIG_CMD_ELF -#define CONFIG_CMD_FLASH #define CONFIG_CMD_I2C #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC -#undef CONFIG_CMD_NFS #define CONFIG_CMD_REGINFO #undef CONFIG_CMD_USB #undef CONFIG_CMD_BMP diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index 8bf4e53..ae11e7d 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -35,23 +35,15 @@ #define CONFIG_BOOTP_HOSTNAME /* Command line configuration */ -#include - -#define CONFIG_CMD_BOOTD #define CONFIG_CMD_CACHE #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF -#define CONFIG_CMD_FLASH #define CONFIG_CMD_I2C -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC #define CONFIG_CMD_MII #define CONFIG_CMD_PCI #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_LOADS #define CONFIG_MCFFEC #ifdef CONFIG_MCFFEC diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index b4fa5af..a93bafc 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -39,7 +39,6 @@ /* * Command line configuration. */ -#include #define CONFIG_CMD_CACHE #define CONFIG_SYS_LONGHELP /* undef to save memory */ diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 5d97874..ddb5cda 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -39,16 +39,10 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_CACHE -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_LOADS #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #define CONFIG_CMD_IDE -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC #define CONFIG_CMD_PING #ifdef CONFIG_CMD_IDE diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h index 0bfa946..7f5ee8a 100644 --- a/include/configs/M5253EVBE.h +++ b/include/configs/M5253EVBE.h @@ -49,15 +49,10 @@ /* * Command line configuration. */ -#include #define CONFIG_CMD_CACHE -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_LOADS #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #define CONFIG_CMD_IDE -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC /* ATA */ #define CONFIG_DOS_PARTITION diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index f5cd0a0..d888c3e 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -56,18 +56,11 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_CACHE #define CONFIG_CMD_MII #define CONFIG_CMD_PING -#define CONFIG_CMD_MISC #define CONFIG_CMD_ELF -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_MEMORY -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_LOADB #define CONFIG_BOOTDELAY 5 #define CONFIG_MCFFEC diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index 3660dda..fa9b973 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -55,19 +55,13 @@ #define CONFIG_BOOTP_HOSTNAME /* Available command configuration */ -#include - #define CONFIG_CMD_CACHE #define CONFIG_CMD_PING #define CONFIG_CMD_MII #define CONFIG_CMD_ELF -#define CONFIG_CMD_FLASH #define CONFIG_CMD_I2C -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_DHCP -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_LOADB #define CONFIG_MCFFEC #ifdef CONFIG_MCFFEC diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index aeba9c0..860abe7 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -47,14 +47,10 @@ /* * Command line configuration. */ -#include #define CONFIG_CMD_CACHE #define CONFIG_CMD_PING #define CONFIG_CMD_MII -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_LOADB - #define CONFIG_MCFFEC #ifdef CONFIG_MCFFEC # define CONFIG_MII 1 diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index 65adadc..817b142 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -27,15 +27,10 @@ #define CONFIG_WATCHDOG_TIMEOUT 5000 /* Command line configuration */ -#include - #define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE #define CONFIG_CMD_ELF -#define CONFIG_CMD_FLASH #undef CONFIG_CMD_I2C -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC #define CONFIG_CMD_MII #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 16ef80b..4724a9c 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -27,15 +27,10 @@ #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ /* Command line configuration */ -#include - #define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE #define CONFIG_CMD_ELF -#define CONFIG_CMD_FLASH #define CONFIG_CMD_I2C -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC #define CONFIG_CMD_MII #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index e3c36a6..32afa44 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -27,15 +27,10 @@ #define CONFIG_WATCHDOG_TIMEOUT 3360 /* timeout in ms, max is 3.36 sec */ /* Command line configuration */ -#include - #define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE #define CONFIG_CMD_ELF -#define CONFIG_CMD_FLASH #define CONFIG_CMD_I2C -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC #define CONFIG_CMD_MII #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h index 271ea3d..1f65918 100644 --- a/include/configs/M54418TWR.h +++ b/include/configs/M54418TWR.h @@ -38,30 +38,20 @@ #define CONFIG_BOOTP_HOSTNAME /* Command line configuration */ -#include - -#define CONFIG_CMD_BOOTD #define CONFIG_CMD_CACHE #undef CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF -#undef CONFIG_CMD_FLASH #undef CONFIG_CMD_I2C #undef CONFIG_CMD_JFFS2 #undef CONFIG_CMD_UBI -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC #define CONFIG_CMD_MII #undef CONFIG_CMD_NAND -#define CONFIG_CMD_NFS #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #define CONFIG_CMD_SPI #define CONFIG_CMD_SF -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_LOADS /* * NAND FLASH diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h index 7a4a945..2c08512 100644 --- a/include/configs/M54451EVB.h +++ b/include/configs/M54451EVB.h @@ -39,27 +39,18 @@ #define CONFIG_BOOTP_HOSTNAME /* Command line configuration */ -#include - -#define CONFIG_CMD_BOOTD #define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF -#define CONFIG_CMD_FLASH #define CONFIG_CMD_I2C #undef CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC #define CONFIG_CMD_MII -#define CONFIG_CMD_NFS #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #define CONFIG_CMD_SPI #define CONFIG_CMD_SF -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_LOADS /* Network configuration */ #define CONFIG_MCFFEC diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index f503744..e82ba32 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -39,21 +39,15 @@ #define CONFIG_BOOTP_HOSTNAME /* Command line configuration */ -#include - -#define CONFIG_CMD_BOOTD #define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT -#define CONFIG_CMD_FLASH #define CONFIG_CMD_I2C #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC #define CONFIG_CMD_MII #undef CONFIG_CMD_PCI #define CONFIG_CMD_PING @@ -61,8 +55,6 @@ #define CONFIG_CMD_SPI #define CONFIG_CMD_SF -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_LOADS /* Network configuration */ #define CONFIG_MCFFEC diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h index 427ccf0..3c1bb90 100644 --- a/include/configs/M5475EVB.h +++ b/include/configs/M5475EVB.h @@ -29,15 +29,10 @@ #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ /* Command line configuration */ -#include - #define CONFIG_CMD_CACHE #undef CONFIG_CMD_DATE #define CONFIG_CMD_ELF -#define CONFIG_CMD_FLASH #define CONFIG_CMD_I2C -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC #define CONFIG_CMD_MII #define CONFIG_CMD_PCI #define CONFIG_CMD_PING diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h index 26a16ec..7e1b364 100644 --- a/include/configs/M5485EVB.h +++ b/include/configs/M5485EVB.h @@ -29,15 +29,10 @@ #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ /* Command line configuration */ -#include - #define CONFIG_CMD_CACHE #undef CONFIG_CMD_DATE #define CONFIG_CMD_ELF -#define CONFIG_CMD_FLASH #define CONFIG_CMD_I2C -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC #define CONFIG_CMD_MII #define CONFIG_CMD_PCI #define CONFIG_CMD_PING diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index 147f122..cb21b73 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -51,8 +51,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index 771ea1e..4150d5a 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -446,8 +446,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_I2C diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 9cea76a..d558db7 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -489,8 +489,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_I2C @@ -498,11 +496,6 @@ #define CONFIG_CMD_DATE #define CONFIG_CMD_PCI -#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND) - #undef CONFIG_CMD_SAVEENV - #undef CONFIG_CMD_LOADS -#endif - #define CONFIG_CMDLINE_EDITING 1 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index fbf38c8..cbe10af 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -469,19 +469,12 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_MII #define CONFIG_CMD_DATE #define CONFIG_CMD_PCI -#if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_SAVEENV - #undef CONFIG_CMD_LOADS -#endif - #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index 2dd71b7..7547c12 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -335,8 +335,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_EEPROM @@ -345,10 +343,6 @@ #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI #endif -#if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_SAVEENV - #undef CONFIG_CMD_LOADS -#endif #undef CONFIG_WATCHDOG /* watchdog disabled */ diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index 14abd35..9805df7 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -420,8 +420,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_ASKENV @@ -430,12 +428,6 @@ #define CONFIG_CMD_PCI #endif -#if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_SAVEENV - #undef CONFIG_CMD_LOADS -#endif - - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 17f230f..57547a4 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -486,8 +486,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_DATE @@ -497,12 +495,6 @@ #define CONFIG_CMD_PCI #endif -#if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_SAVEENV - #undef CONFIG_CMD_LOADS -#endif - - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 7204068..32cb007 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -496,8 +496,6 @@ boards, we say we have two, but don't display a message if we find only one. */ /* * Command line configuration. */ -#include - #define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE #define CONFIG_CMD_IRQ diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 521904d..cebd175 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -490,8 +490,6 @@ extern int board_pci_host_broken(void); /* * Command line configuration. */ -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_MII @@ -501,11 +499,6 @@ extern int board_pci_host_broken(void); #define CONFIG_CMD_PCI #endif -#if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_SAVEENV - #undef CONFIG_CMD_LOADS -#endif - #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 19e0e30..5c6ad19 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -500,8 +500,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_MII @@ -511,11 +509,6 @@ #define CONFIG_CMD_PCI #endif -#if defined(CONFIG_SYS_RAMBOOT) -#undef CONFIG_CMD_SAVEENV -#undef CONFIG_CMD_LOADS -#endif - #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 30d8cdc..6a90531 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -635,8 +635,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_IRQ #define CONFIG_CMD_PING #define CONFIG_CMD_I2C diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index ff9a67d..931816b 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -348,8 +348,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_ELF @@ -359,12 +357,6 @@ #define CONFIG_CMD_PCI #endif -#if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_SAVEENV - #undef CONFIG_CMD_LOADS -#endif - - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 6b7f784..d24d1ca 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -366,8 +366,6 @@ extern unsigned long get_clock_freq(void); /* * Command line configuration. */ -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_MII diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index ad2c52c..ef268a8 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -382,8 +382,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * Command line configuration. */ -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_MII diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index f49b1e5..a80221a 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -491,8 +491,6 @@ extern unsigned long get_clock_freq(void); /* * Command line configuration. */ -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_MII diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 15b6e6c..675ca87 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -364,8 +364,6 @@ extern unsigned long get_clock_freq(void); /* * Command line configuration. */ -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_MII diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 2250c2f..5a481d5 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -384,8 +384,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_ELF @@ -400,12 +398,6 @@ #define CONFIG_CMD_MII #endif -#if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_SAVEENV - #undef CONFIG_CMD_LOADS -#endif - - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 91bf267..05e5a3d 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -386,8 +386,6 @@ extern unsigned long get_clock_freq(void); /* * Command line configuration. */ -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_MII diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 4cb586d..78019b9 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -477,8 +477,6 @@ extern unsigned long get_clock_freq(void); /* * Command line configuration. */ -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_MII diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 943c575..71bd51b 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -593,8 +593,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ERRATA #define CONFIG_CMD_IRQ #define CONFIG_CMD_PING diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 4b99fc3..de56c48 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -467,16 +467,10 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_MII -#if defined(CONFIG_SYS_RAMBOOT) -#undef CONFIG_CMD_SAVEENV -#endif - #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI #define CONFIG_CMD_SCSI diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 938874f..f20ee79 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -627,16 +627,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * Command line configuration. */ -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_REGINFO -#if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_SAVEENV -#endif - #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI #define CONFIG_CMD_SCSI diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h index d10bd2a..f1af928 100644 --- a/include/configs/MigoR.h +++ b/include/configs/MigoR.h @@ -13,14 +13,8 @@ #define CONFIG_CPU_SH7722 1 #define CONFIG_MIGO_R 1 -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_PING -#define CONFIG_CMD_NFS #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SAVEENV #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 09e670f..4e3c05a 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -812,8 +812,6 @@ extern unsigned long get_sdram_size(void); /* * Command line configuration. */ -#include - #define CONFIG_CMD_DATE #define CONFIG_CMD_ERRATA #define CONFIG_CMD_ELF diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 78ce4c0..6ddf447 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -679,8 +679,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ELF #define CONFIG_CMD_ERRATA #define CONFIG_CMD_IRQ diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h index 233995c..8fff431 100644 --- a/include/configs/P1023RDB.h +++ b/include/configs/P1023RDB.h @@ -271,8 +271,6 @@ extern unsigned long get_clock_freq(void); /* * Command line configuration. */ -#include - #define CONFIG_CMD_IRQ #define CONFIG_CMD_PING #define CONFIG_CMD_MII diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index a510b4c..cc8700b 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -618,8 +618,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); /* * Command line configuration. */ -#include - #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF #define CONFIG_CMD_ERRATA diff --git a/include/configs/PATI.h b/include/configs/PATI.h index 3ca204e..dfc4fc0 100644 --- a/include/configs/PATI.h +++ b/include/configs/PATI.h @@ -42,21 +42,11 @@ /* * Command line configuration. */ -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_LOADB #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_BDI -#define CONFIG_CMD_CONSOLE -#define CONFIG_CMD_RUN #define CONFIG_CMD_BSP -#define CONFIG_CMD_IMI #define CONFIG_CMD_EEPROM #define CONFIG_CMD_IRQ -#define CONFIG_CMD_MISC #if 0 diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index 9a1b2ac..c9d08e6 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -41,8 +41,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_IDE #define CONFIG_CMD_DHCP #define CONFIG_CMD_PCI diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 80f4276..3a71ff8 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -61,8 +61,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_DHCP #define CONFIG_CMD_PCI #define CONFIG_CMD_IRQ diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h index a64c82a..5712298 100644 --- a/include/configs/PMC405DE.h +++ b/include/configs/PMC405DE.h @@ -54,8 +54,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_BSP #define CONFIG_CMD_CHIP_CONFIG #define CONFIG_CMD_DATE @@ -65,7 +63,6 @@ #define CONFIG_CMD_I2C #define CONFIG_CMD_IRQ #define CONFIG_CMD_MII -#define CONFIG_CMD_NFS #define CONFIG_CMD_PCI #define CONFIG_CMD_PING diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index 31b9050..9ed6c61 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -271,8 +271,6 @@ #define CONFIG_DOS_PARTITION #define CONFIG_ISO_PARTITION -#include - #define CONFIG_CMD_BSP #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP @@ -283,7 +281,6 @@ #define CONFIG_CMD_I2C #define CONFIG_CMD_MII #define CONFIG_CMD_NAND -#define CONFIG_CMD_NFS #define CONFIG_CMD_PCI #define CONFIG_CMD_PING #define CONFIG_CMD_USB diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h index 2cad01c..0fa03cf 100644 --- a/include/configs/T102xQDS.h +++ b/include/configs/T102xQDS.h @@ -848,8 +848,6 @@ unsigned long get_board_ddr_clk(void); /* * Command line configuration. */ -#include - #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index 8430f97..f99663a 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -853,8 +853,6 @@ unsigned long get_board_ddr_clk(void); /* * Command line configuration. */ -#include - #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM @@ -865,9 +863,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMD_I2C #define CONFIG_CMD_MII #define CONFIG_CMD_PING -#define CONFIG_CMD_ECHO #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_BDI #ifdef CONFIG_PCI #define CONFIG_CMD_PCI diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index e28b8d5..0206e54 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -722,8 +722,6 @@ unsigned long get_board_ddr_clk(void); /* * Command line configuration. */ -#include - #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 7366457..16d2e0e 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -745,8 +745,6 @@ /* * Command line configuration. */ -#include - #ifdef CONFIG_T1042RDB_PI #define CONFIG_CMD_DATE #endif diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index b2d2d83..b0ee0de 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -792,8 +792,6 @@ unsigned long get_board_ddr_clk(void); /* * Command line configuration. */ -#include - #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF #define CONFIG_CMD_ERRATA @@ -803,7 +801,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMD_MII #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_BDI #ifdef CONFIG_PCI #define CONFIG_CMD_PCI diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 151007b..8c637c2 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -748,17 +748,13 @@ unsigned long get_board_ddr_clk(void); /* * Command line configuration. */ -#include - #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF #define CONFIG_CMD_ERRATA #define CONFIG_CMD_MII #define CONFIG_CMD_I2C #define CONFIG_CMD_PING -#define CONFIG_CMD_ECHO #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_BDI #ifdef CONFIG_PCI #define CONFIG_CMD_PCI diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index b2207da..8ed6bf7 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -318,8 +318,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF #define CONFIG_CMD_ERRATA diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index cdccbef..5a59b80 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -166,8 +166,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP @@ -175,7 +173,6 @@ #define CONFIG_CMD_I2C #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MII -#define CONFIG_CMD_NFS #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #define CONFIG_CMD_SNTP diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index 0d5a2b9..9b9217e 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -106,8 +106,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP @@ -115,7 +113,6 @@ #define CONFIG_CMD_EXT2 #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_NFS #define CONFIG_CMD_SNTP #ifdef CONFIG_SPLASH_SCREEN diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h index e765a03..5240e0f 100644 --- a/include/configs/TQM823M.h +++ b/include/configs/TQM823M.h @@ -104,8 +104,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP @@ -113,7 +111,6 @@ #define CONFIG_CMD_EXT2 #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_NFS #define CONFIG_CMD_SNTP diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 7b496c8..4164303 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -289,15 +289,12 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_DTT #define CONFIG_CMD_EEPROM #define CONFIG_CMD_I2C -#define CONFIG_CMD_NFS #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MII #define CONFIG_CMD_PING @@ -308,11 +305,6 @@ #define CONFIG_CMD_PCI #endif -#if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_SAVEENV - #undef CONFIG_CMD_LOADS -#endif - /* * Miscellaneous configurable options */ diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h index bbdc3f8..edadf55 100644 --- a/include/configs/TQM850L.h +++ b/include/configs/TQM850L.h @@ -94,8 +94,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP @@ -103,7 +101,6 @@ #define CONFIG_CMD_EXT2 #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_NFS #define CONFIG_CMD_SNTP diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h index 5fc87f2..166bb2c 100644 --- a/include/configs/TQM850M.h +++ b/include/configs/TQM850M.h @@ -94,8 +94,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP @@ -103,7 +101,6 @@ #define CONFIG_CMD_EXT2 #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_NFS #define CONFIG_CMD_SNTP diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h index 589d168..8b16ad2 100644 --- a/include/configs/TQM855L.h +++ b/include/configs/TQM855L.h @@ -97,8 +97,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP @@ -106,7 +104,6 @@ #define CONFIG_CMD_EXT2 #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_NFS #define CONFIG_CMD_SNTP diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h index 60acb56..8a05fa4 100644 --- a/include/configs/TQM855M.h +++ b/include/configs/TQM855M.h @@ -126,8 +126,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP @@ -136,7 +134,6 @@ #define CONFIG_CMD_EEPROM #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_NFS #define CONFIG_CMD_SNTP diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index ebc5571..bf3a25b 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -97,8 +97,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP @@ -106,7 +104,6 @@ #define CONFIG_CMD_EXT2 #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_NFS #define CONFIG_CMD_SNTP diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h index f4ce07f..47e5c6c 100644 --- a/include/configs/TQM860M.h +++ b/include/configs/TQM860M.h @@ -97,8 +97,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP @@ -106,7 +104,6 @@ #define CONFIG_CMD_EXT2 #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_NFS #define CONFIG_CMD_SNTP diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h index 97db519..fa892a9 100644 --- a/include/configs/TQM862L.h +++ b/include/configs/TQM862L.h @@ -100,8 +100,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP @@ -109,7 +107,6 @@ #define CONFIG_CMD_EXT2 #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_NFS #define CONFIG_CMD_SNTP diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h index 25d60a7..13319f2 100644 --- a/include/configs/TQM862M.h +++ b/include/configs/TQM862M.h @@ -100,8 +100,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP @@ -109,7 +107,6 @@ #define CONFIG_CMD_EXT2 #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_NFS #define CONFIG_CMD_SNTP diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h index 928b879..0e378f2 100644 --- a/include/configs/TQM866M.h +++ b/include/configs/TQM866M.h @@ -140,8 +140,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM @@ -149,7 +147,6 @@ #define CONFIG_CMD_EXT2 #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_NFS #define CONFIG_CMD_SNTP diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h index 598020c..76ddef5 100644 --- a/include/configs/TQM885D.h +++ b/include/configs/TQM885D.h @@ -136,8 +136,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP @@ -146,7 +144,6 @@ #define CONFIG_CMD_I2C #define CONFIG_CMD_IDE #define CONFIG_CMD_MII -#define CONFIG_CMD_NFS #define CONFIG_CMD_PING diff --git a/include/configs/UCP1020.h b/include/configs/UCP1020.h index bc2ca66..bdedef5 100644 --- a/include/configs/UCP1020.h +++ b/include/configs/UCP1020.h @@ -490,8 +490,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_IRQ #define CONFIG_CMD_PING #define CONFIG_CMD_I2C diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 6aee6db..60c2948 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -49,8 +49,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_CACHE #define CONFIG_CMD_EEPROM #define CONFIG_CMD_I2C diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h index e229256..ddd6377 100644 --- a/include/configs/VOM405.h +++ b/include/configs/VOM405.h @@ -59,8 +59,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_DHCP #define CONFIG_CMD_BSP #define CONFIG_CMD_IRQ diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h index f8cea62..fc4595b 100644 --- a/include/configs/a3m071.h +++ b/include/configs/a3m071.h @@ -45,8 +45,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_BSP #define CONFIG_CMD_CACHE #define CONFIG_CMD_MII diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h index b03f163..1be78fd 100644 --- a/include/configs/a4m072.h +++ b/include/configs/a4m072.h @@ -93,13 +93,10 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_EEPROM #define CONFIG_CMD_FAT #define CONFIG_CMD_I2C #define CONFIG_CMD_IDE -#define CONFIG_CMD_NFS #define CONFIG_CMD_SNTP #define CONFIG_CMD_USB #define CONFIG_CMD_MII diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h index 28f4de2..8a5d1e6 100644 --- a/include/configs/ac14xx.h +++ b/include/configs/ac14xx.h @@ -394,8 +394,6 @@ #define CONFIG_LOADS_ECHO 1 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM @@ -405,7 +403,6 @@ #undef CONFIG_CMD_EXT2 #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MII -#define CONFIG_CMD_NFS #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO diff --git a/include/configs/adp-ag101.h b/include/configs/adp-ag101.h index e318c75..4d52ba1 100644 --- a/include/configs/adp-ag101.h +++ b/include/configs/adp-ag101.h @@ -109,8 +109,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE #define CONFIG_CMD_PING diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h index 24904b0..06860b5 100644 --- a/include/configs/adp-ag101p.h +++ b/include/configs/adp-ag101p.h @@ -109,8 +109,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE #define CONFIG_CMD_PING diff --git a/include/configs/adp-ag102.h b/include/configs/adp-ag102.h index c46eed9..026696c 100644 --- a/include/configs/adp-ag102.h +++ b/include/configs/adp-ag102.h @@ -104,8 +104,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE #define CONFIG_CMD_PING @@ -113,8 +111,6 @@ #define CONFIG_CMD_FAT #define CONFIG_CMD_ELF -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS /* * PCI diff --git a/include/configs/alpr.h b/include/configs/alpr.h index 0f125dc..f113ebd 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -217,18 +217,12 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_FPGA #define CONFIG_CMD_FPGA_LOADMK #define CONFIG_CMD_I2C -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_LOADS #define CONFIG_CMD_MII #define CONFIG_CMD_NAND -#undef CONFIG_CMD_NFS #define CONFIG_CMD_PCI #undef CONFIG_WATCHDOG /* watchdog disabled */ diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 4961180..035c156 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -451,7 +451,6 @@ */ #if defined(CONFIG_NOR) #undef CONFIG_SYS_NO_FLASH -#define CONFIG_CMD_FLASH #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE #define CONFIG_SYS_FLASH_PROTECTION #define CONFIG_SYS_FLASH_CFI diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index 9b31b9c..2f4117d 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -127,8 +127,6 @@ #endif /* CONFIG_USB_AM35X */ /* commands to include */ -#include - #define CONFIG_CMD_EXT2 /* EXT2 Support */ #define CONFIG_CMD_FAT /* FAT support */ #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ @@ -139,10 +137,6 @@ #define CONFIG_CMD_DHCP #undef CONFIG_CMD_PING -#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMI /* iminfo */ -#undef CONFIG_CMD_IMLS /* List all found images */ #define CONFIG_SYS_NO_FLASH #define CONFIG_SYS_I2C @@ -150,7 +144,6 @@ #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 #define CONFIG_SYS_I2C_OMAP34XX -#undef CONFIG_CMD_NFS /* * Board NAND Info. */ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 31e758d..e5b4621 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -126,8 +126,6 @@ #endif /* CONFIG_USB_MUSB_AM35X */ /* commands to include */ -#include - #define CONFIG_CMD_EXT2 /* EXT2 Support */ #define CONFIG_CMD_FAT /* FAT support */ #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ @@ -138,10 +136,6 @@ #define CONFIG_CMD_DHCP #undef CONFIG_CMD_PING -#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMI /* iminfo */ -#undef CONFIG_CMD_IMLS /* List all found images */ #define CONFIG_SYS_NO_FLASH #define CONFIG_SYS_I2C diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 4ee7931..466ded7 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -12,7 +12,6 @@ #define CONFIG_AM43XX #define CONFIG_CMD_FAT -#define CONFIG_CMD_SAVEENV #define CONFIG_BOARD_LATE_INIT #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h index 9d6146a..37dac7d 100644 --- a/include/configs/amcc-common.h +++ b/include/configs/amcc-common.h @@ -53,8 +53,6 @@ /* * Commands */ -#include - #define CONFIG_CMD_ASKENV #if defined(CONFIG_440) #define CONFIG_CMD_CACHE @@ -67,7 +65,6 @@ #define CONFIG_CMD_I2C #define CONFIG_CMD_IRQ #define CONFIG_CMD_MII -#define CONFIG_CMD_NFS #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO diff --git a/include/configs/amcore.h b/include/configs/amcore.h index 5e197be..45fd265 100644 --- a/include/configs/amcore.h +++ b/include/configs/amcore.h @@ -21,12 +21,7 @@ #define CONFIG_BOOTDELAY 1 #define CONFIG_BOOTCOMMAND "bootm ffc20000" -#include #undef CONFIG_CMD_AES -#undef CONFIG_CMD_BOOTD -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_XIMG #define CONFIG_CMD_CACHE #define CONFIG_CMD_TIMER #define CONFIG_CMD_DIAG diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h index 573c98f..03810c3 100644 --- a/include/configs/ap325rxa.h +++ b/include/configs/ap325rxa.h @@ -14,14 +14,8 @@ #define CONFIG_CPU_SH7723 1 #define CONFIG_AP325RXA 1 -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_PING -#define CONFIG_CMD_NFS #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_IDE #define CONFIG_CMD_EXT2 #define CONFIG_DOS_PARTITION diff --git a/include/configs/ap_sh4a_4a.h b/include/configs/ap_sh4a_4a.h index 5b95dd3..4bcfb4c 100644 --- a/include/configs/ap_sh4a_4a.h +++ b/include/configs/ap_sh4a_4a.h @@ -18,14 +18,10 @@ #define CONFIG_BOARD_LATE_INIT #define CONFIG_SYS_TEXT_BASE 0x8BFC0000 -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_PING #define CONFIG_CMD_MII -#define CONFIG_CMD_NFS #define CONFIG_CMD_SDRAM #define CONFIG_CMD_ENV -#define CONFIG_CMD_SAVEENV #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/apf27.h b/include/configs/apf27.h index 7554023..a0a26bb 100644 --- a/include/configs/apf27.h +++ b/include/configs/apf27.h @@ -25,7 +25,7 @@ /* * Enable the call to miscellaneous platform dependent initialization. */ -#define CONFIG_SYS_NO_FLASH /* to be define before */ +#define CONFIG_SYS_NO_FLASH /* * Board display option @@ -65,8 +65,6 @@ /* * U-Boot Commands */ -#include - #define CONFIG_CMD_ASKENV /* ask for env variable */ #define CONFIG_CMD_BSP /* Board Specific functions */ #define CONFIG_CMD_CACHE /* icache, dcache */ @@ -84,7 +82,6 @@ #define CONFIG_CMD_NAND /* NAND support */ #define CONFIG_CMD_NAND_LOCK_UNLOCK #define CONFIG_CMD_NAND_TRIMFFS -#define CONFIG_CMD_NFS /* NFS support */ #define CONFIG_CMD_PING /* ping support */ #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS diff --git a/include/configs/apx4devkit.h b/include/configs/apx4devkit.h index 445cb19..2bbef55 100644 --- a/include/configs/apx4devkit.h +++ b/include/configs/apx4devkit.h @@ -21,7 +21,6 @@ /* U-Boot Commands */ #define CONFIG_SYS_NO_FLASH -#include #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DOS_PARTITION @@ -34,9 +33,7 @@ #define CONFIG_CMD_MII #define CONFIG_CMD_MMC #define CONFIG_CMD_NAND -#define CONFIG_CMD_NFS #define CONFIG_CMD_PING -#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_USB /* Memory configuration */ diff --git a/include/configs/arcangel4.h b/include/configs/arcangel4.h index 5e4097f..6636e0e 100644 --- a/include/configs/arcangel4.h +++ b/include/configs/arcangel4.h @@ -41,8 +41,6 @@ /* * Command line configuration */ -#include - #define CONFIG_CMD_ELF #define CONFIG_OF_LIBFDT diff --git a/include/configs/aria.h b/include/configs/aria.h index 2f9677c..2265f3e 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -407,8 +407,6 @@ #define CONFIG_LOADS_ECHO 1 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM @@ -417,7 +415,6 @@ #undef CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MII -#define CONFIG_CMD_NFS #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO diff --git a/include/configs/armadillo-800eva.h b/include/configs/armadillo-800eva.h index e540e3f..7f5cbcc 100644 --- a/include/configs/armadillo-800eva.h +++ b/include/configs/armadillo-800eva.h @@ -16,15 +16,11 @@ #include -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_DFL #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_RUN -#define CONFIG_CMD_LOADS #define CONFIG_CMD_MII #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP -#define CONFIG_CMD_NFS #define CONFIG_CMD_BOOTZ #define CONFIG_OF_LIBFDT diff --git a/include/configs/aspenite.h b/include/configs/aspenite.h index f4cf1c0..62c5374 100644 --- a/include/configs/aspenite.h +++ b/include/configs/aspenite.h @@ -40,9 +40,7 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#include #define CONFIG_CMD_I2C -#undef CONFIG_CMD_NFS /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index bd0919e..c6e1f56 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -42,8 +42,6 @@ #define CONFIG_ASTRO5373L /* define board type */ /* Command line configuration */ -#include - /* * CONFIG_RAM defines if u-boot is loaded via BDM (or started from * a different bootloader that has already performed RAM setup) or @@ -64,19 +62,11 @@ #define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE #define CONFIG_CMD_ELF -#define CONFIG_CMD_FLASH #define CONFIG_CMD_I2C -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC -#define CONFIG_CMD_XIMG -#undef CONFIG_CMD_NFS #if ENABLE_JFFS #define CONFIG_CMD_JFFS2 #endif #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_FPGA #define CONFIG_CMD_FPGA_LOADMK #define CONFIG_CMDLINE_EDITING diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h index 9289964..c2621ff 100644 --- a/include/configs/at91-sama5_common.h +++ b/include/configs/at91-sama5_common.h @@ -48,10 +48,6 @@ /* * Command line configuration. */ -#include -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_LOADS #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h index 735c82a..6f1f65f 100644 --- a/include/configs/at91rm9200ek.h +++ b/include/configs/at91rm9200ek.h @@ -122,14 +122,11 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_DHCP #define CONFIG_CMD_FAT #define CONFIG_CMD_MII #define CONFIG_CMD_PING #define CONFIG_CMD_USB -#undef CONFIG_CMD_FPGA /* * Network Driver Setting diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index c4b2e16..e98cf0c 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -79,14 +79,6 @@ /* * Command line configuration. */ -#include -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_SOURCE - #define CONFIG_CMD_PING 1 #define CONFIG_CMD_DHCP 1 #define CONFIG_CMD_NAND 1 diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 407a53e..42461d2 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -86,14 +86,6 @@ /* * Command line configuration. */ -#include -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_SOURCE - #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_NAND diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index fa19e8b..731c7f1 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -94,14 +94,6 @@ /* * Command line configuration. */ -#include -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_SOURCE - #define CONFIG_CMD_PING 1 #define CONFIG_CMD_DHCP 1 #define CONFIG_CMD_NAND 1 diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index e4c49f4..09d8bec 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -80,14 +80,6 @@ /* No NOR flash */ #define CONFIG_SYS_NO_FLASH - -#include -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADS - #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_NAND diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index aec91da..a19d4d9 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -70,9 +70,6 @@ /* * Command line configuration. */ -#include -#undef CONFIG_CMD_FPGA - #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index 637d150..e709f9c 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -76,14 +76,6 @@ /* * Command line configuration. */ -#include -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_SOURCE #undef CONFIG_CMD_USB #define CONFIG_CMD_NAND 1 diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index c241dac..b9a7754 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -68,10 +68,6 @@ /* * Command line configuration. */ -#include -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI - #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_NAND diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index ac59014..1cab0a9 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -80,8 +80,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP #define CONFIG_CMD_EXT2 @@ -91,10 +89,6 @@ #define CONFIG_CMD_SF #define CONFIG_CMD_SPI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_SETGETDCR -#undef CONFIG_CMD_SOURCE -#undef CONFIG_CMD_XIMG #define CONFIG_ATMEL_USART #define CONFIG_MACB diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h index 77af772..486d9ee 100644 --- a/include/configs/atngw100mkii.h +++ b/include/configs/atngw100mkii.h @@ -99,8 +99,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP #define CONFIG_CMD_EXT2 @@ -111,9 +109,6 @@ #define CONFIG_CMD_SPI #define CONFIG_CMD_MII -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_SETGETDCR -#undef CONFIG_CMD_XIMG #define CONFIG_ATMEL_USART #define CONFIG_MACB diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index 4beb068..1cd99e9 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -101,8 +101,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP #define CONFIG_CMD_EXT2 @@ -110,10 +108,6 @@ #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MMC -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_SETGETDCR -#undef CONFIG_CMD_SOURCE -#undef CONFIG_CMD_XIMG #define CONFIG_ATMEL_USART #define CONFIG_MACB diff --git a/include/configs/axs101.h b/include/configs/axs101.h index 5e8c14d..25116e5 100644 --- a/include/configs/axs101.h +++ b/include/configs/axs101.h @@ -121,8 +121,6 @@ /* * Command line configuration */ -#include - #define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM #define CONFIG_CMD_ELF diff --git a/include/configs/balloon3.h b/include/configs/balloon3.h index 60981f9..12c5a6c 100644 --- a/include/configs/balloon3.h +++ b/include/configs/balloon3.h @@ -46,13 +46,8 @@ /* * Bootloader Components Configuration */ -#include - -#undef CONFIG_CMD_NFS #undef CONFIG_CMD_ENV -#undef CONFIG_CMD_IMLS #define CONFIG_CMD_USB -#define CONFIG_CMD_FPGA #define CONFIG_CMD_FPGA_LOADMK #undef CONFIG_LCD diff --git a/include/configs/baltos.h b/include/configs/baltos.h index 6242895..68bfee5 100644 --- a/include/configs/baltos.h +++ b/include/configs/baltos.h @@ -196,8 +196,6 @@ "run mmcboot;" \ "run nandboot;" -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_NFS /* NS16550 Configuration */ #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h index 2e118d8..741fb05 100644 --- a/include/configs/bav335x.h +++ b/include/configs/bav335x.h @@ -601,7 +601,6 @@ DEFAULT_LINUX_BOOT_ENV \ */ #if defined(CONFIG_NOR) #undef CONFIG_SYS_NO_FLASH -#define CONFIG_CMD_FLASH #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE #define CONFIG_SYS_FLASH_PROTECTION #define CONFIG_SYS_FLASH_CFI diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h index 900dc42..8f0f7f0 100644 --- a/include/configs/bcm28155_ap.h +++ b/include/configs/bcm28155_ap.h @@ -71,7 +71,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* No mtest functions as recommended */ -#undef CONFIG_CMD_MEMORY /* * This is the initial SP which is used only briefly for relocating the u-boot @@ -124,7 +123,6 @@ #define CONFIG_BOOTCOMMAND "" /* Commands */ -#include #define CONFIG_CMD_ASKENV #define CONFIG_CMD_CACHE #define CONFIG_CMD_FAT @@ -134,6 +132,5 @@ #define CONFIG_CMD_BOOTZ #define CONFIG_FAT_WRITE -#undef CONFIG_CMD_NFS #endif /* __BCM28155_AP_H */ diff --git a/include/configs/bcm_ep_board.h b/include/configs/bcm_ep_board.h index fb85c72..ba26964 100644 --- a/include/configs/bcm_ep_board.h +++ b/include/configs/bcm_ep_board.h @@ -35,9 +35,6 @@ /* Some commands use this as the default load address */ #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE -/* No mtest functions as recommended */ -#undef CONFIG_CMD_MEMORY - /* * This is the initial SP which is used only briefly for relocating the u-boot * image to the top of SDRAM. After relocation u-boot moves the stack to the @@ -85,8 +82,6 @@ #define CONFIG_MX_CYCLIC /* Commands */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_CACHE #define CONFIG_CMD_FAT diff --git a/include/configs/beagle_x15.h b/include/configs/beagle_x15.h index c5dde99..17fdded 100644 --- a/include/configs/beagle_x15.h +++ b/include/configs/beagle_x15.h @@ -28,8 +28,6 @@ #define FAT_ENV_DEVICE_AND_PART "0:1" #define FAT_ENV_FILE "uboot.env" -#define CONFIG_CMD_SAVEENV - #define CONSOLEDEV "ttyO2" #define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */ #define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ @@ -50,7 +48,6 @@ #define CONFIG_EFI_PARTITION /* CPSW Ethernet */ -#define CONFIG_CMD_NFS #define CONFIG_CMD_DHCP #define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ #define CONFIG_BOOTP_DNS2 diff --git a/include/configs/bf506f-ezkit.h b/include/configs/bf506f-ezkit.h index dd6cb7a..64db3ac 100644 --- a/include/configs/bf506f-ezkit.h +++ b/include/configs/bf506f-ezkit.h @@ -62,7 +62,6 @@ #define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 71 -#define CONFIG_CMD_FLASH #define CONFIG_MONITOR_IS_IN_RAM */ #define CONFIG_SYS_NO_FLASH @@ -96,7 +95,6 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_BFIN_SERIAL -#define CONFIG_CMD_MEMORY #undef CONFIG_GZIP #undef CONFIG_ZLIB #undef CONFIG_BOOTM_RTEMS diff --git a/include/configs/bf525-ucr2.h b/include/configs/bf525-ucr2.h index d4f06f3..fce6fc2 100644 --- a/include/configs/bf525-ucr2.h +++ b/include/configs/bf525-ucr2.h @@ -93,9 +93,4 @@ "sf read 0x1000000 0x20000 0x300000;" \ "bootm 0x1000000\0" -/* this sets up the default list of enabled commands */ -#include -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_IMLS - #endif diff --git a/include/configs/bf537-minotaur.h b/include/configs/bf537-minotaur.h index 530763d..7e52d17 100644 --- a/include/configs/bf537-minotaur.h +++ b/include/configs/bf537-minotaur.h @@ -145,22 +145,16 @@ # define CONFIG_BOOTDELAY 5 #endif -#include - #ifdef CONFIG_BFIN_MAC # define CONFIG_CMD_DHCP # define CONFIG_CMD_PING -#else -# undef CONFIG_CMD_NFS #endif #define CONFIG_CMD_BOOTLDR #define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE #define CONFIG_CMD_ELF -#undef CONFIG_CMD_FLASH #define CONFIG_CMD_I2C -#undef CONFIG_CMD_IMLS #define CONFIG_CMD_SF #define CONFIG_BOOTCOMMAND "run ramboot" diff --git a/include/configs/bf537-srv1.h b/include/configs/bf537-srv1.h index 11338a5..d8a0cc6 100644 --- a/include/configs/bf537-srv1.h +++ b/include/configs/bf537-srv1.h @@ -144,22 +144,16 @@ # define CONFIG_BOOTDELAY 5 #endif -#include - #ifdef CONFIG_BFIN_MAC # define CONFIG_CMD_DHCP # define CONFIG_CMD_PING -#else -# undef CONFIG_CMD_NFS #endif #define CONFIG_CMD_BOOTLDR #define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE #define CONFIG_CMD_ELF -#undef CONFIG_CMD_FLASH #define CONFIG_CMD_I2C -#undef CONFIG_CMD_IMLS #define CONFIG_CMD_SF #define CONFIG_BOOTCOMMAND "run flashboot" diff --git a/include/configs/bf561-acvilon.h b/include/configs/bf561-acvilon.h index 6d3f690..da28396 100644 --- a/include/configs/bf561-acvilon.h +++ b/include/configs/bf561-acvilon.h @@ -121,7 +121,6 @@ * Env Storage Settings */ #define CONFIG_ENV_IS_IN_SPI_FLASH -/* #define CONFIG_CMD_SAVEENV */ #define CONFIG_ENV_SECT_SIZE (1056 * 8) #define CONFIG_ENV_OFFSET ((16 + 256) * 1056) #define CONFIG_ENV_SIZE (8 * 1056) diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h index fc8378d..0e353b9 100644 --- a/include/configs/bf609-ezkit.h +++ b/include/configs/bf609-ezkit.h @@ -84,7 +84,6 @@ /* * Flash Settings */ -#undef CONFIG_CMD_IMLS #undef CONFIG_CMD_JFFS2 #define CONFIG_SYS_FLASH_CFI_WIDTH 2 #define CONFIG_FLASH_CFI_DRIVER @@ -140,7 +139,6 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_SOFTSWITCH #define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 20*1024*1024 + 4) diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index 1c9d584..7b2faf2 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -9,7 +9,6 @@ * Command Settings */ #ifndef _CONFIG_CMD_DEFAULT_H -# include # ifdef ADI_CMDS_NETWORK # define CONFIG_CMD_DHCP # define CONFIG_BOOTP_SUBNETMASK @@ -23,9 +22,6 @@ # ifdef CONFIG_BFIN_MAC # define CONFIG_CMD_MII # endif -# else -# undef CONFIG_CMD_BOOTD -# undef CONFIG_CMD_NFS # endif # ifdef CONFIG_LIBATA # define CONFIG_CMD_FAT @@ -75,10 +71,7 @@ # define CONFIG_CMD_I2C # define CONFIG_SOFT_I2C_READ_REPEATED_START # endif -# ifdef CONFIG_SYS_NO_FLASH -# undef CONFIG_CMD_FLASH -# undef CONFIG_CMD_IMLS -# else +# ifndef CONFIG_SYS_NO_FLASH # define CONFIG_CMD_JFFS2 # endif # ifdef CONFIG_CMD_JFFS2 diff --git a/include/configs/bg0900.h b/include/configs/bg0900.h index 99202b5..76c1c6a 100644 --- a/include/configs/bg0900.h +++ b/include/configs/bg0900.h @@ -11,7 +11,6 @@ /* U-Boot Commands */ #define CONFIG_SYS_NO_FLASH -#include #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DOS_PARTITION @@ -22,9 +21,7 @@ #define CONFIG_CMD_MII #define CONFIG_CMD_NAND #define CONFIG_CMD_NAND_TRIMFFS -#define CONFIG_CMD_NFS #define CONFIG_CMD_PING -#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_SF #define CONFIG_CMD_SPI diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h index 92bb573..c0197ca 100644 --- a/include/configs/blackstamp.h +++ b/include/configs/blackstamp.h @@ -102,8 +102,6 @@ #define CONFIG_AUTO_COMPLETE 1 #define CONFIG_ENV_OVERWRITE 1 -#include - #ifdef CONFIG_SMC91111 # define CONFIG_CMD_DHCP # define CONFIG_CMD_PING @@ -236,8 +234,6 @@ * hardware don't support Parallel Flash at all. */ #define CONFIG_SYS_NO_FLASH -#undef CONFIG_CMD_IMLS #undef CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_FLASH #endif diff --git a/include/configs/blackvme.h b/include/configs/blackvme.h index ffa6969..4752b07 100644 --- a/include/configs/blackvme.h +++ b/include/configs/blackvme.h @@ -152,8 +152,6 @@ #define CONFIG_CMDLINE_EDITING 1 #define CONFIG_AUTO_COMPLETE 1 -#include - #define CONFIG_CMD_BOOTLDR #define CONFIG_CMD_CACHE #define CONFIG_CMD_CPLBINFO @@ -233,8 +231,6 @@ * No Parallel Flash on this board */ #define CONFIG_SYS_NO_FLASH -#undef CONFIG_CMD_IMLS #undef CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_FLASH #endif diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index e28e5ad..1521415 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -151,28 +151,6 @@ sizeof(CONFIG_SYS_PROMPT) + 16) /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* - * For commands to use, we take the default list and add a few other - * useful commands. Note that we must have set CONFIG_SYS_NO_FLASH - * prior to this include, in order to skip a few commands. When we do - * have flash, if we expect these commands they must be enabled in that - * config. If desired, a specific list of desired commands can be used - * instead. - */ -#include -/* undefine commands, which we do not need */ -#undef CONFIG_CMD_EDITENV -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_ITEST -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_SETGETDCR -#undef CONFIG_CMD_XIMG -/* define command we need always */ -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_SOURCE /* * Our platforms make use of SPL to initalize the hardware (primarily diff --git a/include/configs/calimain.h b/include/configs/calimain.h index 8353fc9..7d8bb47 100644 --- a/include/configs/calimain.h +++ b/include/configs/calimain.h @@ -311,7 +311,6 @@ /* * U-Boot commands */ -#include #define CONFIG_CMD_ENV #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP @@ -319,7 +318,6 @@ #define CONFIG_CMD_MII #define CONFIG_CMD_PING #define CONFIG_CMD_SAVES -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_GPIO #ifndef CONFIG_DRIVER_TI_EMAC diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h index 7fa6fcc..21e3a0c 100644 --- a/include/configs/cam_enc_4xx.h +++ b/include/configs/cam_enc_4xx.h @@ -90,12 +90,6 @@ #define CONFIG_MMC_MBLOCK /* U-Boot command configuration */ -#include - -#define CONFIG_CMD_BDI -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_SETGETDCR #define CONFIG_CMD_ASKENV #define CONFIG_CMD_CACHE #define CONFIG_CMD_DHCP diff --git a/include/configs/canmb.h b/include/configs/canmb.h index c901793..c656378 100644 --- a/include/configs/canmb.h +++ b/include/configs/canmb.h @@ -49,14 +49,11 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_IMMAP #define CONFIG_CMD_MII -#define CONFIG_CMD_NFS #define CONFIG_CMD_REGINFO #define CONFIG_CMD_SNTP diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h index 9393864..4607d9f 100644 --- a/include/configs/cm5200.h +++ b/include/configs/cm5200.h @@ -26,8 +26,6 @@ /* * Supported commands */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_BSP #define CONFIG_CMD_DATE @@ -37,7 +35,6 @@ #define CONFIG_CMD_I2C #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MII -#define CONFIG_CMD_NFS #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #define CONFIG_CMD_SNTP diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index 3796374..231f4ba 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -19,10 +19,6 @@ /* CMD */ #define CONFIG_CMD_GREPENV -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_XIMG -#undef CONFIG_CMD_FPGA /* MMC */ #define CONFIG_SYS_FSL_USDHC_NUM 3 diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 3eb7886..41df106 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -110,8 +110,6 @@ #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* commands to include */ -#include - #define CONFIG_CMD_CACHE #define CONFIG_CMD_EXT2 /* EXT2 Support */ #define CONFIG_CMD_FAT /* FAT support */ @@ -129,9 +127,6 @@ #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING -#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMLS /* List all found images */ #define CONFIG_SYS_NO_FLASH #define CONFIG_SYS_I2C diff --git a/include/configs/cm_t3517.h b/include/configs/cm_t3517.h index 8c63138..a8d0b97 100644 --- a/include/configs/cm_t3517.h +++ b/include/configs/cm_t3517.h @@ -120,8 +120,6 @@ #define CONFIG_CMD_USB /* commands to include */ -#include - #define CONFIG_CMD_CACHE #define CONFIG_CMD_EXT2 /* EXT2 Support */ #define CONFIG_CMD_FAT /* FAT support */ @@ -140,9 +138,6 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_GPIO -#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMLS /* List all found images */ #define CONFIG_SYS_NO_FLASH #define CONFIG_SYS_I2C diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h index a129f68..2a8b730 100644 --- a/include/configs/cm_t54.h +++ b/include/configs/cm_t54.h @@ -57,7 +57,6 @@ #define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */ #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) #define CONFIG_SYS_REDUNDAND_ENVIRONMENT -#define CONFIG_CMD_SAVEENV /* Enhance our eMMC support / experience. */ #define CONFIG_HSMMC2_8BIT diff --git a/include/configs/cmi_mpc5xx.h b/include/configs/cmi_mpc5xx.h index 9bc3795..d081865 100644 --- a/include/configs/cmi_mpc5xx.h +++ b/include/configs/cmi_mpc5xx.h @@ -44,21 +44,8 @@ /* * Command line configuration. */ -#include - -#undef CONFIG_CMD_NFS - -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_LOADB #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_LOADS #define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BDI -#define CONFIG_CMD_CONSOLE -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_RUN -#define CONFIG_CMD_IMI #if 0 diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 11dd4d7..8a6106d 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -120,12 +120,8 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_PING -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_LOADB #undef CONFIG_CMD_MII #ifdef CONFIG_MCFFEC diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index 6f25fdb..e3f0ab0 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -52,15 +52,9 @@ /* * Bootloader Components Configuration */ -#include - -#undef CONFIG_CMD_LOADB /* Both together */ -#undef CONFIG_CMD_LOADS /* saves 10 KB */ #define CONFIG_CMD_ENV -#undef CONFIG_CMD_IMLS #define CONFIG_CMD_MMC #define CONFIG_CMD_USB -#define CONFIG_CMD_FLASH /* * Networking Configuration diff --git a/include/configs/colibri_t20.h b/include/configs/colibri_t20.h index a3f27e3..8228e42 100644 --- a/include/configs/colibri_t20.h +++ b/include/configs/colibri_t20.h @@ -55,7 +55,6 @@ #define CONFIG_ENV_SIZE (SZ_64K) /* Debug commands */ -#define CONFIG_CMD_BDI #define CONFIG_CMD_CACHE /* Miscellaneous commands */ diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index f26aad4..aff2810 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -13,7 +13,6 @@ #define __CONFIG_H #include -#include #define CONFIG_VF610 #define CONFIG_SYS_THUMB_BUILD @@ -70,7 +69,6 @@ "512k(u-boot-env)," \ "-(ubi)" -#undef CONFIG_CMD_IMLS #define CONFIG_MMC #define CONFIG_FSL_ESDHC diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h index b3cb72c..8f829ed 100644 --- a/include/configs/controlcenterd.h +++ b/include/configs/controlcenterd.h @@ -352,7 +352,6 @@ #if defined(CONFIG_TRAILBLAZER) #define CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ -#undef CONFIG_CMD_SAVEENV #elif defined(CONFIG_RAMBOOT_SPIFLASH) #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SPI_BUS 0 @@ -394,8 +393,6 @@ #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#include - #ifndef CONFIG_TRAILBLAZER #define CONFIG_CMD_ELF diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index cb063a4..88750e0 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -619,8 +619,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF #define CONFIG_CMD_ERRATA diff --git a/include/configs/corvus.h b/include/configs/corvus.h index f5b8f9b..3cfae21 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -70,13 +70,6 @@ /* * Command line configuration. */ -#include -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADS - #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_NAND diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h index 1feaefd..d3c6f75 100644 --- a/include/configs/cpu9260.h +++ b/include/configs/cpu9260.h @@ -249,13 +249,6 @@ /* * Command line configuration. */ -#include -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_IMLS - #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_NAND diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h index 77d3ab8..f990cf7 100644 --- a/include/configs/cpuat91.h +++ b/include/configs/cpuat91.h @@ -108,16 +108,10 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_MII #define CONFIG_CMD_CACHE #undef CONFIG_CMD_USB -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_NFS #undef CONFIG_CMD_DHCP #ifdef CONFIG_SYS_I2C_SOFT diff --git a/include/configs/csb272.h b/include/configs/csb272.h index a5c6f84..71cb5df 100644 --- a/include/configs/csb272.h +++ b/include/configs/csb272.h @@ -71,8 +71,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_BEDBUG #define CONFIG_CMD_ELF diff --git a/include/configs/csb472.h b/include/configs/csb472.h index 6aa98ef..5bd3867 100644 --- a/include/configs/csb472.h +++ b/include/configs/csb472.h @@ -71,8 +71,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_BEDBUG #define CONFIG_CMD_ELF diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h index 3505229..729b6e7 100644 --- a/include/configs/da830evm.h +++ b/include/configs/da830evm.h @@ -170,7 +170,6 @@ /* * U-Boot commands */ -#include #define CONFIG_CMD_ENV #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP @@ -178,9 +177,6 @@ #define CONFIG_CMD_MII #define CONFIG_CMD_PING #define CONFIG_CMD_SAVES -#define CONFIG_CMD_MEMORY -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_SETGETDCR #ifdef CONFIG_CMD_BDI #define CONFIG_CLOCKS @@ -193,8 +189,6 @@ #endif #ifdef CONFIG_USE_NAND -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS #define CONFIG_CMD_NAND #define CONFIG_CMD_MTDPARTS #define CONFIG_MTD_PARTITIONS @@ -202,11 +196,8 @@ #endif #ifdef CONFIG_USE_SPIFLASH -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_FLASH #define CONFIG_CMD_SPI #define CONFIG_CMD_SF -#define CONFIG_CMD_SAVEENV #endif /* SD/MMC configuration */ @@ -237,8 +228,6 @@ #define CONFIG_ENV_IS_NOWHERE #define CONFIG_SYS_NO_FLASH #define CONFIG_ENV_SIZE (16 << 10) -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_FLASH #undef CONFIG_CMD_ENV #endif diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index e9a144d..3da9da4 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -293,7 +293,6 @@ /* * U-Boot commands */ -#include #define CONFIG_CMD_ENV #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP @@ -301,7 +300,6 @@ #define CONFIG_CMD_MII #define CONFIG_CMD_PING #define CONFIG_CMD_SAVES -#define CONFIG_CMD_MEMORY #ifdef CONFIG_CMD_BDI #define CONFIG_CLOCKS @@ -314,8 +312,6 @@ #endif #ifdef CONFIG_USE_NAND -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS #define CONFIG_CMD_NAND #define CONFIG_CMD_MTDPARTS @@ -328,10 +324,7 @@ #endif #ifdef CONFIG_USE_SPIFLASH -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_FLASH #define CONFIG_CMD_SPI -#define CONFIG_CMD_SAVEENV #endif #if !defined(CONFIG_USE_NAND) && \ @@ -340,7 +333,6 @@ #define CONFIG_ENV_IS_NOWHERE #define CONFIG_SYS_NO_FLASH #define CONFIG_ENV_SIZE (16 << 10) -#undef CONFIG_CMD_IMLS #undef CONFIG_CMD_ENV #endif diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h index 16b901b..847d788 100644 --- a/include/configs/davinci_dm355evm.h +++ b/include/configs/davinci_dm355evm.h @@ -69,13 +69,6 @@ /* NYET -- #define CONFIG_USB_DAVINCI */ /* U-Boot command configuration */ -#include - -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_SETGETDCR - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP #define CONFIG_CMD_I2C diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h index 4eed722..d4b994a 100644 --- a/include/configs/davinci_dm355leopard.h +++ b/include/configs/davinci_dm355leopard.h @@ -54,13 +54,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* U-Boot command configuration */ -#include - -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_SETGETDCR - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP #define CONFIG_CMD_I2C diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h index c50c059..8b42c50 100644 --- a/include/configs/davinci_dm365evm.h +++ b/include/configs/davinci_dm365evm.h @@ -112,13 +112,6 @@ #endif /* CONFIG_MUSB_UDC */ /* U-Boot command configuration */ -#include - -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_SETGETDCR - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP #define CONFIG_CMD_I2C diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h index b02e73c..8571cbd 100644 --- a/include/configs/davinci_dm6467evm.h +++ b/include/configs/davinci_dm6467evm.h @@ -112,7 +112,6 @@ extern unsigned int davinci_arm_clk_get(void); "root=/dev/hda1 rw noinitrd ip=dhcp" /* U-Boot commands */ -#include #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DIAG #define CONFIG_CMD_I2C @@ -121,12 +120,7 @@ extern unsigned int davinci_arm_clk_get(void); #define CONFIG_CMD_EEPROM #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_SETGETDCR #ifdef CONFIG_SYS_USE_NAND -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS #define CONFIG_CMD_NAND #endif diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h index 2467f70..6108736 100644 --- a/include/configs/davinci_dvevm.h +++ b/include/configs/davinci_dvevm.h @@ -169,7 +169,6 @@ /*=================*/ /* U-Boot commands */ /*=================*/ -#include #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP #define CONFIG_CMD_DIAG @@ -178,17 +177,12 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_SAVES #define CONFIG_CMD_EEPROM -#undef CONFIG_CMD_BDI #ifdef CONFIG_CMD_BDI #define CONFIG_CLOCKS #endif -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_SETGETDCR #ifdef CONFIG_SYS_USE_NAND -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS #define CONFIG_CMD_NAND #elif defined(CONFIG_SYS_USE_NOR) #define CONFIG_CMD_JFFS2 diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h index 2505465..db636e4 100644 --- a/include/configs/davinci_schmoogie.h +++ b/include/configs/davinci_schmoogie.h @@ -111,7 +111,6 @@ /*=================*/ /* U-Boot commands */ /*=================*/ -#include #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP #define CONFIG_CMD_DIAG @@ -122,11 +121,6 @@ #define CONFIG_CMD_DATE #define CONFIG_CMD_NAND #undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_SETGETDCR -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS #ifdef CONFIG_CMD_BDI #define CONFIG_CLOCKS diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h index e773835..9ecf6ce 100644 --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -104,7 +104,6 @@ "nand read 87A00000 100000 300000;" \ "bootelf 87A00000" /* U-Boot commands */ -#include #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP #define CONFIG_CMD_DIAG @@ -115,11 +114,6 @@ #define CONFIG_CMD_NAND #define CONFIG_CMD_EEPROM #define CONFIG_CMD_ELF /* Needed to load Integrity kernel. */ -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_SETGETDCR -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS #ifdef CONFIG_CMD_BDI #define CONFIG_CLOCKS diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h index dae37cd..410cf68 100644 --- a/include/configs/davinci_sonata.h +++ b/include/configs/davinci_sonata.h @@ -157,7 +157,6 @@ /*=================*/ /* U-Boot commands */ /*=================*/ -#include #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP #define CONFIG_CMD_DIAG @@ -166,12 +165,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_SAVES #define CONFIG_CMD_EEPROM -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_SETGETDCR #ifdef CONFIG_SYS_USE_NAND -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS #define CONFIG_CMD_NAND #elif defined(CONFIG_SYS_USE_NOR) #define CONFIG_CMD_JFFS2 diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h index 12a24ce..c32e078 100644 --- a/include/configs/db-88f6820-gp.h +++ b/include/configs/db-88f6820-gp.h @@ -26,7 +26,6 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#include #define CONFIG_CMD_CACHE #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h index 77d3408..c33a588 100644 --- a/include/configs/db-mv784mp-gp.h +++ b/include/configs/db-mv784mp-gp.h @@ -24,7 +24,6 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#include #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV #define CONFIG_CMD_I2C diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h index ea55084..0abab78 100644 --- a/include/configs/dbau1x00.h +++ b/include/configs/dbau1x00.h @@ -74,26 +74,15 @@ /* * Command line configuration. */ -#include - -#undef CONFIG_CMD_BDI #undef CONFIG_CMD_BEDBUG #undef CONFIG_CMD_ELF -#undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_FAT -#undef CONFIG_CMD_FPGA #undef CONFIG_CMD_MII -#undef CONFIG_CMD_RUN - #ifdef CONFIG_DBAU1550 -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_LOADB - #undef CONFIG_CMD_I2C #undef CONFIG_CMD_IDE -#undef CONFIG_CMD_NFS #undef CONFIG_CMD_PCMCIA #else @@ -101,10 +90,6 @@ #define CONFIG_CMD_IDE #define CONFIG_CMD_DHCP -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_LOADS - #endif diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h index bd96a7d..4f35234 100644 --- a/include/configs/devkit3250.h +++ b/include/configs/devkit3250.h @@ -49,7 +49,6 @@ /* * NOR Flash */ -#define CONFIG_CMD_FLASH #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 71 #define CONFIG_SYS_FLASH_BASE EMC_CS0_BASE @@ -78,7 +77,6 @@ /* * U-Boot Commands */ -#include #define CONFIG_CMD_CACHE /* diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 84b047e..215dc30 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -100,8 +100,6 @@ #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ #define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands */ -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMI /* iminfo */ #undef CONFIG_CMD_SPI #undef CONFIG_CMD_GPIO #undef CONFIG_CMD_ASKENV diff --git a/include/configs/dig297.h b/include/configs/dig297.h index 5ec3c99..f6d7ec4 100644 --- a/include/configs/dig297.h +++ b/include/configs/dig297.h @@ -103,8 +103,6 @@ #define CONFIG_LZO /* commands to include */ -#include - #define CONFIG_CMD_FAT /* FAT support */ #define CONFIG_CMD_UBI /* UBI Support */ #define CONFIG_CMD_UBIFS /* UBIFS Support */ @@ -118,12 +116,6 @@ #define CONFIG_CMD_MMC /* MMC support */ #define CONFIG_CMD_NAND /* NAND support */ -#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMI /* iminfo */ -#undef CONFIG_CMD_IMLS /* List all found images */ -#undef CONFIG_CMD_NFS /* NFS support */ - #define CONFIG_SYS_NO_FLASH #define CONFIG_SYS_I2C #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h index 06da3c3..a7af351 100644 --- a/include/configs/digsy_mtc.h +++ b/include/configs/digsy_mtc.h @@ -99,8 +99,6 @@ /* * Command line configuration. */ -#include - #ifdef CONFIG_VIDEO #define CONFIG_CMD_BMP #endif diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h index 0f67595..e6bfe58 100644 --- a/include/configs/dlvision-10g.h +++ b/include/configs/dlvision-10g.h @@ -71,7 +71,6 @@ #undef CONFIG_CMD_ELF #undef CONFIG_CMD_I2C #undef CONFIG_CMD_IRQ -#undef CONFIG_CMD_NFS /* * SDRAM configuration (please see cpu/ppc/sdram.[ch]) diff --git a/include/configs/dlvision.h b/include/configs/dlvision.h index a9cfc10..0299d16 100644 --- a/include/configs/dlvision.h +++ b/include/configs/dlvision.h @@ -67,7 +67,6 @@ #undef CONFIG_CMD_ELF #undef CONFIG_CMD_I2C #undef CONFIG_CMD_IRQ -#undef CONFIG_CMD_NFS /* * SDRAM configuration (please see cpu/ppc/sdram.[ch]) diff --git a/include/configs/dnp5370.h b/include/configs/dnp5370.h index 3cbd67f..e809f20 100644 --- a/include/configs/dnp5370.h +++ b/include/configs/dnp5370.h @@ -118,11 +118,4 @@ "cp.b 0x01000000 0x20030000 0x2c0000\0" \ "runme=bootm 0x01000000\0" -/* this sets up the default list of enabled commands */ -#include - -#ifndef CONFIG_BFIN_MAC -# undef CONFIG_CMD_NFS -#endif - #endif diff --git a/include/configs/dns325.h b/include/configs/dns325.h index 379e6c7..54be415 100644 --- a/include/configs/dns325.h +++ b/include/configs/dns325.h @@ -32,7 +32,6 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#include #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV #define CONFIG_CMD_NAND diff --git a/include/configs/dockstar.h b/include/configs/dockstar.h index ec7f721..b27b202 100644 --- a/include/configs/dockstar.h +++ b/include/configs/dockstar.h @@ -31,7 +31,6 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#include #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV #define CONFIG_CMD_MII diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 63e22f1..914e1cf 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -28,7 +28,6 @@ #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) #define CONFIG_SYS_REDUNDAND_ENVIRONMENT #endif -#define CONFIG_CMD_SAVEENV #if (CONFIG_CONS_INDEX == 1) #define CONSOLEDEV "ttyO0" @@ -275,7 +274,6 @@ #define CONFIG_SYS_FLASH_SIZE (64 * 1024 * 1024) /* 64 MB */ /* #define CONFIG_INIT_IGNORE_ERROR */ #undef CONFIG_SYS_NO_FLASH -#define CONFIG_CMD_FLASH #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE #define CONFIG_SYS_FLASH_PROTECTION #define CONFIG_SYS_FLASH_CFI diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h index 5216cb5..133c7f4 100644 --- a/include/configs/dreamplug.h +++ b/include/configs/dreamplug.h @@ -46,7 +46,6 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#include #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV #define CONFIG_CMD_FAT diff --git a/include/configs/ea20.h b/include/configs/ea20.h index 9370708..b9f28a3 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -147,7 +147,6 @@ /* * U-Boot commands */ -#include #define CONFIG_CMD_ENV #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP @@ -155,7 +154,6 @@ #define CONFIG_CMD_MII #define CONFIG_CMD_PING #define CONFIG_CMD_SAVES -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_I2C #define CONFIG_CMD_GPIO @@ -171,8 +169,6 @@ /* NAND Setup */ #ifdef CONFIG_SYS_USE_NAND -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS #define CONFIG_CMD_NAND #define CONFIG_CMD_MTDPARTS @@ -196,11 +192,8 @@ /* SPI Flash */ #ifdef CONFIG_USE_SPIFLASH -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_FLASH #define CONFIG_CMD_SPI #define CONFIG_CMD_SF -#define CONFIG_CMD_SAVEENV #endif #if !defined(CONFIG_SYS_USE_NAND) && \ @@ -209,7 +202,6 @@ #define CONFIG_ENV_IS_NOWHERE #define CONFIG_SYS_NO_FLASH #define CONFIG_ENV_SIZE (16 << 10) -#undef CONFIG_CMD_IMLS #undef CONFIG_CMD_ENV #endif diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index 5f6148e..924362c 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -64,9 +64,6 @@ * Command line configuration. */ #define CONFIG_CMDLINE_EDITING -#include - -#undef CONFIG_CMD_LOADB #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_I2C diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index f7e70aa..271e071 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -112,9 +112,6 @@ /* * Command line configuration */ - -#include - #define CONFIG_CMD_BMP #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP diff --git a/include/configs/ecovec.h b/include/configs/ecovec.h index 358314c..8e62674 100644 --- a/include/configs/ecovec.h +++ b/include/configs/ecovec.h @@ -30,17 +30,13 @@ #define CONFIG_ECOVEC_ROMIMAGE_ADDR 0xA0040000 #define CONFIG_SYS_TEXT_BASE 0x8FFC0000 -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_PING #define CONFIG_CMD_MII -#define CONFIG_CMD_NFS #define CONFIG_CMD_SDRAM #define CONFIG_CMD_ENV #define CONFIG_CMD_USB #define CONFIG_CMD_FAT #define CONFIG_CMD_EXT2 -#define CONFIG_CMD_SAVEENV #define CONFIG_USB_STORAGE #define CONFIG_DOS_PARTITION diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h index 70f1226..87b29f8 100644 --- a/include/configs/edb93xx.h +++ b/include/configs/edb93xx.h @@ -91,11 +91,6 @@ #undef CONFIG_USE_IRQ /* Don't need IRQ/FIQ */ /* Monitor configuration */ -#include -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_SETGETDCR -#undef CONFIG_CMD_XIMG - #undef CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_JFFS2 diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index bd08740..b5e8e0e 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -135,9 +135,8 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */ /* - * Commands configuration - using default command set for now + * Commands configuration */ -#include #define CONFIG_CMD_IDE #define CONFIG_CMD_I2C #define CONFIG_CMD_USB diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h index f83449f..cba58aa 100644 --- a/include/configs/embestmx6boards.h +++ b/include/configs/embestmx6boards.h @@ -76,9 +76,6 @@ #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #endif -/* Command definition */ -#undef CONFIG_CMD_FPGA - #define CONFIG_CMD_BMODE #define CONFIG_ARP_TIMEOUT 200UL diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h index 3be17f1..141489d 100644 --- a/include/configs/enbw_cmc.h +++ b/include/configs/enbw_cmc.h @@ -152,8 +152,6 @@ #define CONFIG_SYS_MAX_FLASH_SECT 128 #define CONFIG_FLASH_16BIT /* Flash is 16-bit */ -#define CONFIG_CMD_FLASH - #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_SYS_MONITOR_LEN 0x80000 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \ @@ -246,7 +244,6 @@ /* * U-Boot commands */ -#include #define CONFIG_CMD_ENV #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP @@ -254,7 +251,6 @@ #define CONFIG_CMD_MII #define CONFIG_CMD_PING #define CONFIG_CMD_SAVES -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_CACHE #ifdef CONFIG_CMD_BDI @@ -268,7 +264,6 @@ #endif #ifdef CONFIG_USE_NAND -#undef CONFIG_CMD_IMLS #define CONFIG_CMD_NAND #define CONFIG_CMD_MTDPARTS @@ -286,7 +281,6 @@ #define CONFIG_ENV_IS_NOWHERE #define CONFIG_SYS_NO_FLASH #define CONFIG_ENV_SIZE (16 << 10) -#undef CONFIG_CMD_IMLS #undef CONFIG_CMD_ENV #endif diff --git a/include/configs/espt.h b/include/configs/espt.h index f717954..d854341 100644 --- a/include/configs/espt.h +++ b/include/configs/espt.h @@ -18,13 +18,9 @@ * Command line configuration. */ #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_MII #define CONFIG_CMD_PING #define CONFIG_CMD_ENV -#define CONFIG_CMD_NFS -#define CONFIG_CMD_SAVEENV #define CONFIG_BOOTDELAY -1 #define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01" diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index c9dac4c..c7b1e5c 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -90,29 +90,13 @@ #define CONFIG_AT91_GPIO /* Command line configuration */ -#include -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_LOADS - #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MII #define CONFIG_CMD_MTDPARTS #define CONFIG_CMD_NAND #define CONFIG_CMD_SPI -#ifdef MINIMAL_LOADER -#undef CONFIG_CMD_CONSOLE -#undef CONFIG_CMD_EDITENV -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_ITEST -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_SETGETDCR -#undef CONFIG_CMD_XIMG -#else +#ifndef MINIMAL_LOADER #define CONFIG_CMD_ASKENV #define CONFIG_CMD_BSP #define CONFIG_CMD_CACHE diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h index 87f8db0..d7bf80b 100644 --- a/include/configs/exynos-common.h +++ b/include/configs/exynos-common.h @@ -59,8 +59,6 @@ #define CONFIG_PWM /* Command definition*/ -#include - #define CONFIG_CMD_MMC #define CONFIG_CMD_EXT4_WRITE #define CONFIG_FAT_WRITE @@ -79,7 +77,6 @@ /* FLASH and environment organization */ #define CONFIG_SYS_NO_FLASH -#undef CONFIG_CMD_IMLS #include diff --git a/include/configs/exynos4-common.h b/include/configs/exynos4-common.h index f6b0a6f..08e2009 100644 --- a/include/configs/exynos4-common.h +++ b/include/configs/exynos4-common.h @@ -22,10 +22,6 @@ #define CONFIG_MMC_SDMA #define CONFIG_MMC_DEFAULT_DEV 0 -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_MISC -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_XIMG #undef CONFIG_CMD_ONENAND #undef CONFIG_CMD_MTDPARTS #define CONFIG_CMD_DFU diff --git a/include/configs/flea3.h b/include/configs/flea3.h index 846b868..5d66901 100644 --- a/include/configs/flea3.h +++ b/include/configs/flea3.h @@ -72,9 +72,6 @@ /* * Command definition */ - -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_BOOTP_SUBNETMASK diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h index 836515d..967a05a 100644 --- a/include/configs/goflexhome.h +++ b/include/configs/goflexhome.h @@ -53,7 +53,6 @@ #define CONFIG_CONSOLE_MUX #define CONFIG_SYS_CONSOLE_IS_IN_ENV -#include #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV #define CONFIG_CMD_MII diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h index 0ac198d..0de6ae8 100644 --- a/include/configs/gplugd.h +++ b/include/configs/gplugd.h @@ -57,9 +57,7 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#include #define CONFIG_CMD_I2C -#undef CONFIG_CMD_FPGA #define CONFIG_CMD_USB #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT @@ -122,8 +120,6 @@ #define CONFIG_ENV_OFFSET 0x07C000 #define CONFIG_CMD_ASKENV -#define CONFIG_CMD_EDITENV -#define CONFIG_CMD_SAVEENV #ifdef CONFIG_CMD_USB #define CONFIG_USB_EHCI diff --git a/include/configs/gr_cpci_ax2000.h b/include/configs/gr_cpci_ax2000.h index 5d28d8b..782746e 100644 --- a/include/configs/gr_cpci_ax2000.h +++ b/include/configs/gr_cpci_ax2000.h @@ -59,8 +59,6 @@ /* * Supported commands */ -#include - #define CONFIG_CMD_REGINFO #define CONFIG_CMD_AMBAPP #define CONFIG_CMD_PING diff --git a/include/configs/gr_ep2s60.h b/include/configs/gr_ep2s60.h index dd8653a..5c466f2 100644 --- a/include/configs/gr_ep2s60.h +++ b/include/configs/gr_ep2s60.h @@ -53,8 +53,6 @@ /* * Supported commands */ -#include - #define CONFIG_CMD_REGINFO #define CONFIG_CMD_AMBAPP #define CONFIG_CMD_PING diff --git a/include/configs/gr_xc3s_1500.h b/include/configs/gr_xc3s_1500.h index fdd0aa5..e01578c 100644 --- a/include/configs/gr_xc3s_1500.h +++ b/include/configs/gr_xc3s_1500.h @@ -40,8 +40,6 @@ /* * Supported commands */ -#include - #define CONFIG_CMD_REGINFO #define CONFIG_CMD_AMBAPP #define CONFIG_CMD_PING diff --git a/include/configs/grasshopper.h b/include/configs/grasshopper.h index e183f51..231f25a 100644 --- a/include/configs/grasshopper.h +++ b/include/configs/grasshopper.h @@ -92,12 +92,6 @@ /* * Command line configuration. */ -#include - -/* remove unneeded commands */ -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_SETGETDCR - /* add useful commands */ #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP diff --git a/include/configs/grsim.h b/include/configs/grsim.h index 6c52a17..f54919e 100644 --- a/include/configs/grsim.h +++ b/include/configs/grsim.h @@ -48,22 +48,10 @@ * Supported commands */ #define CONFIG_CMD_AMBAPP /* AMBA Plyg&Play information */ -#define CONFIG_CMD_BDI /* bdinfo */ -#define CONFIG_CMD_CONSOLE /* coninfo */ #define CONFIG_CMD_DIAG -#define CONFIG_CMD_ECHO /* echo arguments */ -#define CONFIG_CMD_FPGA /* FPGA configuration Support */ #define CONFIG_CMD_FPGA_LOADMK #define CONFIG_CMD_IRQ -#define CONFIG_CMD_ITEST /* Integer (and string) test */ -#define CONFIG_CMD_LOADB /* loadb */ -#define CONFIG_CMD_LOADS /* loads */ -#define CONFIG_CMD_MISC /* Misc functions like sleep etc */ #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_RUN /* run command in env variable */ -#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ -#define CONFIG_CMD_SOURCE /* "source" command support */ -#define CONFIG_CMD_XIMG /* Load part of Multi Image */ /* * Autobooting diff --git a/include/configs/grsim_leon2.h b/include/configs/grsim_leon2.h index f050754..bd2eaa9 100644 --- a/include/configs/grsim_leon2.h +++ b/include/configs/grsim_leon2.h @@ -46,22 +46,10 @@ /* * Supported commands */ -#define CONFIG_CMD_BDI /* bdinfo */ -#define CONFIG_CMD_CONSOLE /* coninfo */ #define CONFIG_CMD_DIAG -#define CONFIG_CMD_ECHO /* echo arguments */ -#define CONFIG_CMD_FPGA /* FPGA configuration Support */ #define CONFIG_CMD_FPGA_LOADMK #define CONFIG_CMD_IRQ -#define CONFIG_CMD_ITEST /* Integer (and string) test */ -#define CONFIG_CMD_LOADB /* loadb */ -#define CONFIG_CMD_LOADS /* loads */ -#define CONFIG_CMD_MISC /* Misc functions like sleep etc */ #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_RUN /* run command in env variable */ -#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ -#define CONFIG_CMD_SOURCE /* "source" command support */ -#define CONFIG_CMD_XIMG /* Load part of Multi Image */ /* * Autobooting diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h index 8e53af8..5f09567 100644 --- a/include/configs/guruplug.h +++ b/include/configs/guruplug.h @@ -46,7 +46,6 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#include #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV diff --git a/include/configs/h2200.h b/include/configs/h2200.h index c00b951..1d2d09a 100644 --- a/include/configs/h2200.h +++ b/include/configs/h2200.h @@ -116,11 +116,6 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 38400, 115200 } -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_SOURCE -#define CONFIG_CMD_RUN -#define CONFIG_CMD_IMI - #define CONFIG_FIT #define CONFIG_FIT_DISABLE_SHA256 #define CONFIG_SETUP_MEMORY_TAGS diff --git a/include/configs/highbank.h b/include/configs/highbank.h index 08dcdf8..86823e2 100644 --- a/include/configs/highbank.h +++ b/include/configs/highbank.h @@ -54,11 +54,6 @@ /* * Command line configuration. */ -#include - -#define CONFIG_CMD_BDI -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_LOADS #define CONFIG_CMD_SCSI #define CONFIG_BOOT_RETRY_TIME -1 diff --git a/include/configs/hrcon.h b/include/configs/hrcon.h index bea1985..08e2f42 100644 --- a/include/configs/hrcon.h +++ b/include/configs/hrcon.h @@ -471,8 +471,6 @@ int fpga_gpio_get(unsigned int bus, int pin); /* * Command line configuration. */ -#include - #define CONFIG_CMD_I2C #define CONFIG_CMD_MII #define CONFIG_CMD_PCI diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h index f1ddf21..ee52452 100644 --- a/include/configs/ib62x0.h +++ b/include/configs/ib62x0.h @@ -45,7 +45,6 @@ */ #define CONFIG_SYS_NO_FLASH /* declare no flash (NOR/SPI) */ #define CONFIG_SYS_MVFS -#include #define CONFIG_CMD_ENV #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_IDE diff --git a/include/configs/iconnect.h b/include/configs/iconnect.h index 2baf50c..1a5c93d 100644 --- a/include/configs/iconnect.h +++ b/include/configs/iconnect.h @@ -40,7 +40,6 @@ */ #define CONFIG_SYS_NO_FLASH /* declare no flash (NOR/SPI) */ #define CONFIG_SYS_MVFS -#include #define CONFIG_CMD_ENV #define CONFIG_CMD_MII #define CONFIG_CMD_NAND diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 10f840d..e60e753 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -418,18 +418,13 @@ /* * U-Boot environment setup */ -#include - #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING -#define CONFIG_CMD_NFS #define CONFIG_CMD_NAND -#define CONFIG_CMD_FLASH #define CONFIG_CMD_SNTP #define CONFIG_CMD_MII #define CONFIG_CMD_DATE #define CONFIG_CMDLINE_EDITING -#define CONFIG_CMD_EDITENV #define CONFIG_CMD_JFFS2 #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_BOOTP_GATEWAY diff --git a/include/configs/ima3-mx53.h b/include/configs/ima3-mx53.h index 081a054..5a02917 100644 --- a/include/configs/ima3-mx53.h +++ b/include/configs/ima3-mx53.h @@ -73,7 +73,6 @@ #define CONFIG_BAUDRATE 115200 /* Command definition */ -#include #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h index 386dbd8..526659c 100644 --- a/include/configs/imx27lite-common.h +++ b/include/configs/imx27lite-common.h @@ -171,7 +171,6 @@ /* * U-Boot commands */ -#include #define CONFIG_CMD_ASKENV #define CONFIG_CMD_CACHE #define CONFIG_CMD_DHCP diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index 0f22032..c552e9f 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -73,9 +73,6 @@ /*********************************************************** * Command definition ***********************************************************/ - -#include - #define CONFIG_CMD_MII #define CONFIG_CMD_PING #define CONFIG_CMD_SPI diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index db197f3..54e8121 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -52,9 +52,6 @@ /*********************************************************** * Command definition ***********************************************************/ - -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_EEPROM #define CONFIG_CMD_I2C diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index 9258734..c7bf531 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -80,14 +80,11 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #define CONFIG_CMD_IDE -#define CONFIG_CMD_NFS #define CONFIG_CMD_PCI #define CONFIG_CMD_PING #define CONFIG_CMD_SNTP diff --git a/include/configs/integrator-common.h b/include/configs/integrator-common.h index 12c7382..1d307ca 100644 --- a/include/configs/integrator-common.h +++ b/include/configs/integrator-common.h @@ -94,7 +94,6 @@ * - SIB block * - U-Boot environment */ -#define CONFIG_CMD_FLASH #define CONFIG_CMD_ARMFLASH #define CONFIG_SYS_FLASH_CFI 1 #define CONFIG_FLASH_CFI_DRIVER 1 diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index 12eb172..c76ebcb 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -43,8 +43,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_BOOTDELAY 2 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAM0 console=tty" #define CONFIG_BOOTCOMMAND "" diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index 7518b60..d6f2602 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -40,8 +40,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_BOOTDELAY 2 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0" #define CONFIG_BOOTCOMMAND "tftpboot ; bootm" diff --git a/include/configs/io.h b/include/configs/io.h index 8101933..f5b09b6 100644 --- a/include/configs/io.h +++ b/include/configs/io.h @@ -71,7 +71,6 @@ #undef CONFIG_CMD_ELF #undef CONFIG_CMD_I2C #undef CONFIG_CMD_IRQ -#undef CONFIG_CMD_NFS /* * SDRAM configuration (please see cpu/ppc/sdram.[ch]) diff --git a/include/configs/iocon.h b/include/configs/iocon.h index 9d9dabf..f7ae663 100644 --- a/include/configs/iocon.h +++ b/include/configs/iocon.h @@ -67,7 +67,6 @@ #undef CONFIG_CMD_ELF #undef CONFIG_CMD_I2C #undef CONFIG_CMD_IRQ -#undef CONFIG_CMD_NFS /* * SDRAM configuration (please see cpu/ppc/sdram.[ch]) diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h index 16bc373..e68b661 100644 --- a/include/configs/ipam390.h +++ b/include/configs/ipam390.h @@ -255,7 +255,6 @@ /* * U-Boot commands */ -#include #define CONFIG_CMD_ENV #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP @@ -263,7 +262,6 @@ #define CONFIG_CMD_MII #define CONFIG_CMD_PING #define CONFIG_CMD_SAVES -#define CONFIG_CMD_MEMORY #ifdef CONFIG_CMD_BDI #define CONFIG_CLOCKS diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h index 41ced15..230f2c4 100644 --- a/include/configs/ipek01.h +++ b/include/configs/ipek01.h @@ -101,8 +101,6 @@ /* * Command line configuration. */ -#include - #ifdef CONFIG_VIDEO #define CONFIG_CMD_BMP /* BMP support */ #endif diff --git a/include/configs/jornada.h b/include/configs/jornada.h index dd30ba2..71f2ee1 100644 --- a/include/configs/jornada.h +++ b/include/configs/jornada.h @@ -43,14 +43,7 @@ /* * Command line configuration. */ -#include -#define CONFIG_CMD_FLASH #define CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_MISC -#undef CONFIG_CMD_SETGETDCR -#undef CONFIG_CMD_XIMG #define CONFIG_BOOTDELAY 5 #define CONFIG_BOOTARGS "root=/dev/hda1 console=ttySA0,19200n8 console=tty1" diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h index 7dfaa22..65b3df6 100644 --- a/include/configs/jupiter.h +++ b/include/configs/jupiter.h @@ -85,9 +85,6 @@ /* * Command line configuration. */ -#include - -#define CONFIG_CMD_NFS #define CONFIG_CMD_SNTP #if defined(CONFIG_PCI) diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h index 5649901..f3248bc 100644 --- a/include/configs/km/keymile-common.h +++ b/include/configs/km/keymile-common.h @@ -13,13 +13,10 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP #define CONFIG_CMD_DEFAULTENV_VARS #define CONFIG_CMD_GREPENV -#define CONFIG_CMD_ECHO #define CONFIG_CMD_IMMAP #define CONFIG_CMD_MII #define CONFIG_CMD_PING diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index 851e269..15fca1a 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -124,14 +124,11 @@ */ #define CONFIG_CMD_ELF #define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_NFS /* * Without NOR FLASH we need this */ #define CONFIG_SYS_NO_FLASH -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS /* * NAND Flash configuration diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h index ed942a0..a8cf3f7 100644 --- a/include/configs/km/kmp204x-common.h +++ b/include/configs/km/kmp204x-common.h @@ -409,8 +409,6 @@ int get_scl(void); /* we don't need flash support */ #define CONFIG_SYS_NO_FLASH -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_FLASH #undef CONFIG_FLASH_CFI_MTD #undef CONFIG_JFFS2_CMDLINE diff --git a/include/configs/ks2_evm.h b/include/configs/ks2_evm.h index 559446a..e05d56c 100644 --- a/include/configs/ks2_evm.h +++ b/include/configs/ks2_evm.h @@ -208,7 +208,6 @@ #define CONFIG_USB_PHY_CFG_BASE KS2_USB_PHY_CFG_BASE /* U-Boot command configuration */ -#include #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP #define CONFIG_CMD_I2C diff --git a/include/configs/kzm9g.h b/include/configs/kzm9g.h index 7111b08..93c2976 100644 --- a/include/configs/kzm9g.h +++ b/include/configs/kzm9g.h @@ -24,7 +24,6 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_OF_LIBFDT -#include #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index 9ac5d33..30810d3 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -53,7 +53,6 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#include #define CONFIG_CMD_ENV #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING diff --git a/include/configs/lp8x4x.h b/include/configs/lp8x4x.h index e3dd5e0..e9ee3fb 100644 --- a/include/configs/lp8x4x.h +++ b/include/configs/lp8x4x.h @@ -44,10 +44,7 @@ /* * Bootloader Components Configuration */ -#include - #define CONFIG_CMD_ENV -#undef CONFIG_CMD_IMLS #define CONFIG_CMD_MMC #define CONFIG_CMD_USB #undef CONFIG_LCD diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 14c2393..5c9d275 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -7,8 +7,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include - #define CONFIG_LS102XA #define CONFIG_SYS_GENERIC_BOARD @@ -538,12 +536,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMDLINE_TAG #define CONFIG_CMDLINE_EDITING -#ifdef CONFIG_QSPI_BOOT -#undef CONFIG_CMD_IMLS -#else -#define CONFIG_CMD_IMLS -#endif - #define CONFIG_ARMV7_NONSEC #define CONFIG_ARMV7_VIRT #define CONFIG_PEN_ADDR_BIG_ENDIAN @@ -586,7 +578,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_CMD_ENV_EXISTS #define CONFIG_CMD_GREPENV #define CONFIG_CMD_MEMINFO #define CONFIG_CMD_MEMTEST diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 0748e61..446d562 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -7,8 +7,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include - #define CONFIG_LS102XA #define CONFIG_SYS_GENERIC_BOARD @@ -355,12 +353,6 @@ #define CONFIG_CMDLINE_TAG #define CONFIG_CMDLINE_EDITING -#ifdef CONFIG_QSPI_BOOT -#undef CONFIG_CMD_IMLS -#else -#define CONFIG_CMD_IMLS -#endif - #define CONFIG_ARMV7_NONSEC #define CONFIG_ARMV7_VIRT #define CONFIG_PEN_ADDR_BIG_ENDIAN @@ -399,7 +391,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_CMD_ENV_EXISTS #define CONFIG_CMD_GREPENV #define CONFIG_CMD_MEMINFO #define CONFIG_CMD_MEMTEST diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h index 547026e..72ba3b3 100644 --- a/include/configs/ls2085a_common.h +++ b/include/configs/ls2085a_common.h @@ -205,20 +205,10 @@ unsigned long long get_qixis_addr(void); /* Command line configuration */ #define CONFIG_CMD_CACHE -#define CONFIG_CMD_BDI #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_IMI -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_MII #define CONFIG_CMD_PING -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_RUN -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_SOURCE /* Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) diff --git a/include/configs/ls2085aqds.h b/include/configs/ls2085aqds.h index cd2b080..e488ac8 100644 --- a/include/configs/ls2085aqds.h +++ b/include/configs/ls2085aqds.h @@ -8,7 +8,6 @@ #define __LS2_QDS_H #include "ls2085a_common.h" -#include #define CONFIG_IDENT_STRING " LS2085A-QDS" #define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-QDS" diff --git a/include/configs/ls2085ardb.h b/include/configs/ls2085ardb.h index 0837fcd..600261e 100644 --- a/include/configs/ls2085ardb.h +++ b/include/configs/ls2085ardb.h @@ -8,8 +8,6 @@ #define __LS2_RDB_H #include "ls2085a_common.h" -#include - #define CONFIG_IDENT_STRING " LS2085A-RDB" #define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-RDB" diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index 7d22173..ddbf5ce 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -53,7 +53,6 @@ /* * Commands configuration */ -#include #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 799850a..513167e 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -428,8 +428,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP @@ -440,7 +438,6 @@ #define CONFIG_CMD_I2C #define CONFIG_CMD_IRQ #define CONFIG_CMD_MII -#define CONFIG_CMD_NFS #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #define CONFIG_CMD_SDRAM diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index ad7b996..29c60b7 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -18,7 +18,6 @@ /* U-Boot Commands */ #define CONFIG_SYS_NO_FLASH -#include #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DOS_PARTITION #define CONFIG_FAT_WRITE @@ -40,7 +39,6 @@ #define CONFIG_CMD_MMC #define CONFIG_CMD_NAND #define CONFIG_CMD_NAND_TRIMFFS -#define CONFIG_CMD_NFS #define CONFIG_CMD_PING #define CONFIG_CMD_SF #define CONFIG_CMD_SPI diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h index 2d2b226..35058e2 100644 --- a/include/configs/m53evk.h +++ b/include/configs/m53evk.h @@ -26,7 +26,6 @@ /* * U-Boot Commands */ -#include #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_DOS_PARTITION #define CONFIG_FAT_WRITE diff --git a/include/configs/malta.h b/include/configs/malta.h index 9445c9b..ab2335f 100644 --- a/include/configs/malta.h +++ b/include/configs/malta.h @@ -119,13 +119,6 @@ /* * Commands */ -#include - -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_NFS - #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF diff --git a/include/configs/manroland/common.h b/include/configs/manroland/common.h index ab4a471..941290c 100644 --- a/include/configs/manroland/common.h +++ b/include/configs/manroland/common.h @@ -21,8 +21,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_DATE #define CONFIG_CMD_DISPLAY #define CONFIG_CMD_DHCP @@ -32,7 +30,6 @@ #define CONFIG_CMD_DTT #define CONFIG_CMD_IDE #define CONFIG_CMD_FAT -#define CONFIG_CMD_NFS #define CONFIG_CMD_MII #define CONFIG_CMD_SNTP diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h index d8811a4..0839d39 100644 --- a/include/configs/maxbcm.h +++ b/include/configs/maxbcm.h @@ -22,7 +22,6 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#include #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV #define CONFIG_CMD_I2C diff --git a/include/configs/mcx.h b/include/configs/mcx.h index 3405c83..0a7b7cf 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -113,8 +113,6 @@ #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 /* commands to include */ -#include - #define CONFIG_CMD_EXT2 /* EXT2 Support */ #define CONFIG_CMD_FAT /* FAT support */ #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ @@ -137,11 +135,6 @@ #define CONFIG_CMD_MTDPARTS #define CONFIG_CMD_GPIO -#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMI /* iminfo */ -#undef CONFIG_CMD_IMLS /* List all found images */ - #define CONFIG_SYS_NO_FLASH #define CONFIG_SYS_I2C #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 @@ -153,7 +146,6 @@ #define CONFIG_SYS_I2C_RTC_ADDR 0x68 #define CONFIG_CMD_MII -#define CONFIG_CMD_NFS /* * Board NAND Info. */ diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h index 0b9cbae..a8b4b24 100644 --- a/include/configs/mecp5123.h +++ b/include/configs/mecp5123.h @@ -296,13 +296,10 @@ #define CONFIG_LOADS_ECHO /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP #define CONFIG_CMD_I2C #define CONFIG_CMD_MII -#define CONFIG_CMD_NFS #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #define CONFIG_CMD_EEPROM diff --git a/include/configs/meesc.h b/include/configs/meesc.h index 955d0e2..e5bb873 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -86,12 +86,6 @@ /* * Command line configuration. */ -#include -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_IMLS - #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_NAND diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index faa13e3..e16965c 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -244,12 +244,9 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_IRQ #define CONFIG_CMD_MFSL -#define CONFIG_CMD_ECHO #define CONFIG_CMD_GPIO #if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE) @@ -258,9 +255,7 @@ # undef CONFIG_CMD_CACHE #endif -#ifndef CONFIG_SYS_ENET -# undef CONFIG_CMD_NFS -#else +#ifdef CONFIG_SYS_ENET # define CONFIG_CMD_PING # define CONFIG_CMD_DHCP # define CONFIG_CMD_TFTPPUT @@ -272,15 +267,11 @@ #endif #if defined(FLASH) -# define CONFIG_CMD_ECHO -# define CONFIG_CMD_FLASH -# define CONFIG_CMD_IMLS # define CONFIG_CMD_JFFS2 # define CONFIG_CMD_UBI # undef CONFIG_CMD_UBIFS # if !defined(RAMENV) -# define CONFIG_CMD_SAVEENV # define CONFIG_CMD_SAVES # endif @@ -289,12 +280,9 @@ # define CONFIG_CMD_SF # if !defined(RAMENV) -# define CONFIG_CMD_SAVEENV # define CONFIG_CMD_SAVES # endif #else -# undef CONFIG_CMD_IMLS -# undef CONFIG_CMD_FLASH # undef CONFIG_CMD_JFFS2 # undef CONFIG_CMD_UBI # undef CONFIG_CMD_UBIFS diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index cdd5c79..6dc84eb 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -33,8 +33,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_BEDBUG #define CONFIG_CMD_DATE diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index 41ae0a5..782b29d 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -415,8 +415,6 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP @@ -426,7 +424,6 @@ #define CONFIG_CMD_IDE #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MII -#define CONFIG_CMD_NFS #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h index 195bc18..1b09e70 100644 --- a/include/configs/mpc8308_p1m.h +++ b/include/configs/mpc8308_p1m.h @@ -398,8 +398,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_DHCP #define CONFIG_CMD_I2C #define CONFIG_CMD_MII diff --git a/include/configs/mpr2.h b/include/configs/mpr2.h index 8ae497c..3ac4b0b 100644 --- a/include/configs/mpr2.h +++ b/include/configs/mpr2.h @@ -11,10 +11,7 @@ #define __MPR2_H /* Supported commands */ -#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_CACHE -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_FLASH /* Default environment variables */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h index 585d68f..3e99966 100644 --- a/include/configs/ms7720se.h +++ b/include/configs/ms7720se.h @@ -12,10 +12,7 @@ #define CONFIG_CPU_SH7720 1 #define CONFIG_MS7720SE 1 -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_CACHE #define CONFIG_CMD_PCMCIA #define CONFIG_CMD_IDE diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h index fb5fcc6..12bb3a0 100644 --- a/include/configs/ms7722se.h +++ b/include/configs/ms7722se.h @@ -12,13 +12,9 @@ #define CONFIG_CPU_SH7722 1 #define CONFIG_MS7722SE 1 -#define CONFIG_CMD_FLASH #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_NFS #define CONFIG_CMD_PING #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_SAVEENV #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h index 4cf8efe..bbd2d6b 100644 --- a/include/configs/ms7750se.h +++ b/include/configs/ms7750se.h @@ -18,11 +18,6 @@ /* * Command line configuration. */ -/*#include */ - -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_SAVEENV - #define CONFIG_SCIF_CONSOLE 1 #define CONFIG_BAUDRATE 38400 #define CONFIG_CONS_SCIF1 1 diff --git a/include/configs/mt_ventoux.h b/include/configs/mt_ventoux.h index 01e395a..dd516ac 100644 --- a/include/configs/mt_ventoux.h +++ b/include/configs/mt_ventoux.h @@ -48,7 +48,6 @@ /* * FPGA */ -#define CONFIG_CMD_FPGA #define CONFIG_CMD_FPGA_LOADMK #define CONFIG_FPGA #define CONFIG_FPGA_XILINX diff --git a/include/configs/munices.h b/include/configs/munices.h index 535bf2a..42ac029 100644 --- a/include/configs/munices.h +++ b/include/configs/munices.h @@ -26,8 +26,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_ELF #define CONFIG_CMD_IMMAP diff --git a/include/configs/mv88f6281gtw_ge.h b/include/configs/mv88f6281gtw_ge.h index 311fc0c..45a4a75 100644 --- a/include/configs/mv88f6281gtw_ge.h +++ b/include/configs/mv88f6281gtw_ge.h @@ -26,7 +26,6 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#include #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING #define CONFIG_CMD_ENV diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h index 65203a0..529f73b 100644 --- a/include/configs/mx23_olinuxino.h +++ b/include/configs/mx23_olinuxino.h @@ -12,7 +12,6 @@ /* U-Boot Commands */ #define CONFIG_SYS_NO_FLASH -#include #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DOS_PARTITION diff --git a/include/configs/mx23evk.h b/include/configs/mx23evk.h index 273b7d3..b649c7d 100644 --- a/include/configs/mx23evk.h +++ b/include/configs/mx23evk.h @@ -15,9 +15,6 @@ /* U-Boot Commands */ #define CONFIG_SYS_NO_FLASH -#include -#undef CONFIG_CMD_NFS - #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DOS_PARTITION diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index 5f61eb1..bd7216e 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -82,7 +82,6 @@ #define CONFIG_SYS_LONGHELP /* U-Boot commands */ -#include #define CONFIG_OF_LIBFDT #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_CACHE diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index 976192f..588490f 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -17,7 +17,6 @@ /* U-Boot Commands */ #define CONFIG_SYS_NO_FLASH -#include #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DOS_PARTITION @@ -28,9 +27,7 @@ #define CONFIG_CMD_GPIO #define CONFIG_CMD_MII #define CONFIG_CMD_MMC -#define CONFIG_CMD_NFS #define CONFIG_CMD_PING -#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_SF #define CONFIG_CMD_SPI #define CONFIG_CMD_USB diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index bed071f..c4513d2 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -74,9 +74,6 @@ /*********************************************************** * Command definition ***********************************************************/ - -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_SPI diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 1282a6e..7e709cd 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -80,9 +80,6 @@ /*********************************************************** * Command definition ***********************************************************/ - -#include - #define CONFIG_CMD_MII #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP @@ -91,12 +88,6 @@ #define CONFIG_CMD_NAND #define CONFIG_CMD_BOOTZ -/* - * Disabled due to compilation errors in cmd_bootm.c (IMLS seems to require - * that CFG_NO_FLASH is undefined). - */ -#undef CONFIG_CMD_IMLS - #define CONFIG_BOARD_LATE_INIT #define CONFIG_BOOTDELAY 1 diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index 4c71360..c9983f3 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -77,9 +77,6 @@ /* * Command definition */ - -#include - #define CONFIG_OF_LIBFDT #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_PING diff --git a/include/configs/mx51_efikamx.h b/include/configs/mx51_efikamx.h index 3f7e4bc..22aec4f 100644 --- a/include/configs/mx51_efikamx.h +++ b/include/configs/mx51_efikamx.h @@ -11,8 +11,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include - /* * High Level Board Configuration Options */ @@ -42,7 +40,6 @@ #define CONFIG_CMD_EXT2 #define CONFIG_CMD_IDE #define CONFIG_CMD_DATE -#undef CONFIG_CMD_IMLS /* * Environmental settings @@ -197,9 +194,6 @@ */ #ifdef CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION -#ifdef CONFIG_CMD_NET -#define CONFIG_CMD_NFS -#endif #endif /* diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 61e8a98..2203c15 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -128,10 +128,7 @@ /*********************************************************** * Command definition ***********************************************************/ - -#include #define CONFIG_CMD_BOOTZ -#undef CONFIG_CMD_IMLS #define CONFIG_CMD_DATE diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h index 220d4b8..0479195 100644 --- a/include/configs/mx53ard.h +++ b/include/configs/mx53ard.h @@ -75,10 +75,6 @@ #define CONFIG_BAUDRATE 115200 /* Command definition */ -#include - -#undef CONFIG_CMD_IMLS - #define CONFIG_BOOTDELAY 3 #define CONFIG_ETHPRIME "smc911x" diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index 4af9f7e..82c8af8 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -83,10 +83,6 @@ #define CONFIG_BAUDRATE 115200 /* Command definition */ -#include - -#undef CONFIG_CMD_IMLS - #define CONFIG_BOOTDELAY 3 #define CONFIG_ETHPRIME "FEC0" diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index db551a9..53f725d 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -92,12 +92,9 @@ #define CONFIG_BAUDRATE 115200 /* Command definition */ -#include #define CONFIG_CMD_BOOTZ #define CONFIG_SUPPORT_RAW_INITRD -#undef CONFIG_CMD_IMLS - #define CONFIG_BOOTDELAY 1 #define CONFIG_ETHPRIME "FEC0" diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h index dcc86b4..bcdb054 100644 --- a/include/configs/mx53smd.h +++ b/include/configs/mx53smd.h @@ -69,10 +69,6 @@ #define CONFIG_BAUDRATE 115200 /* Command definition */ -#include - -#undef CONFIG_CMD_IMLS - #define CONFIG_BOOTDELAY 3 #define CONFIG_ETHPRIME "FEC0" diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index 50370e1..2ef3201 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -36,7 +36,6 @@ #include #include #include -#include #ifndef CONFIG_MX6 #define CONFIG_MX6 @@ -88,7 +87,6 @@ /* Miscellaneous configurable options */ #define CONFIG_SYS_NO_FLASH -#undef CONFIG_CMD_IMLS #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_HUSH_PARSER #define CONFIG_CMDLINE_EDITING diff --git a/include/configs/nas220.h b/include/configs/nas220.h index cfb85bf..61af61f 100644 --- a/include/configs/nas220.h +++ b/include/configs/nas220.h @@ -45,11 +45,9 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#include #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII #define CONFIG_CMD_NAND -#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_PING #define CONFIG_CMD_USB #define CONFIG_CMD_DATE diff --git a/include/configs/neo.h b/include/configs/neo.h index 09300ca..33cee43 100644 --- a/include/configs/neo.h +++ b/include/configs/neo.h @@ -70,7 +70,6 @@ #undef CONFIG_CMD_ELF #undef CONFIG_CMD_I2C #undef CONFIG_CMD_IRQ -#undef CONFIG_CMD_NFS /* * SDRAM configuration (please see cpu/ppc/sdram.[ch]) diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h index 8a6d256..8755be7 100644 --- a/include/configs/nhk8815.h +++ b/include/configs/nhk8815.h @@ -17,14 +17,8 @@ #define CONFIG_SKIP_LOWLEVEL_INIT /* we have already been loaded to RAM */ /* commands */ -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP -#define CONFIG_CMD_NFS -/* There is no NOR flash, so undefine these commands */ -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS #define CONFIG_SYS_NO_FLASH /* There is NAND storage */ #define CONFIG_NAND_NOMADIK diff --git a/include/configs/nios2-generic.h b/include/configs/nios2-generic.h index 6247bf1..945cbd4 100644 --- a/include/configs/nios2-generic.h +++ b/include/configs/nios2-generic.h @@ -75,15 +75,6 @@ /* * Command line configuration. */ -#include -#undef CONFIG_CMD_BOOTD -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_ITEST -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_SETGETDCR -#undef CONFIG_CMD_XIMG - #ifdef CONFIG_CMD_NET # define CONFIG_CMD_DHCP # define CONFIG_CMD_PING diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index ed98425..efc583f 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -124,8 +124,6 @@ #define CONFIG_SYS_NO_FLASH /* commands to include */ -#include - #define CONFIG_CMD_EXT2 /* EXT2 Support */ #define CONFIG_CMD_EXT4 /* EXT4 Support */ #define CONFIG_CMD_FAT /* FAT support */ @@ -152,13 +150,6 @@ #endif -/* commands not needed from config_cmd_default.h */ -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMI /* iminfo */ -#undef CONFIG_CMD_NFS /* NFS support */ -#undef CONFIG_CMD_SAVEENV /* saveenv */ -#undef CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ - #define CONFIG_OMAP3_SPI #define CONFIG_SYS_I2C #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 diff --git a/include/configs/o2d.h b/include/configs/o2d.h index b2905b2..4b36af6 100644 --- a/include/configs/o2d.h +++ b/include/configs/o2d.h @@ -25,9 +25,6 @@ */ #include "o2dnt-common.h" -/* additional commands */ -#define CONFIG_CMD_ITEST - /* * GPIO configuration: * CS1 SDRAM activate + no CAN + no PCI diff --git a/include/configs/o2dnt-common.h b/include/configs/o2dnt-common.h index 3248429..435f1a2 100644 --- a/include/configs/o2dnt-common.h +++ b/include/configs/o2dnt-common.h @@ -76,8 +76,6 @@ /* * Supported commands */ -#include - #define CONFIG_CMD_EEPROM #define CONFIG_CMD_FAT #define CONFIG_CMD_I2C diff --git a/include/configs/o2dnt2.h b/include/configs/o2dnt2.h index 1b765a7..00a8d96 100644 --- a/include/configs/o2dnt2.h +++ b/include/configs/o2dnt2.h @@ -25,9 +25,6 @@ */ #include "o2dnt-common.h" -/* additional commands */ -#define CONFIG_CMD_ITEST - /* * GPIO configuration: * CS1 SDRAM activate + no CAN + no PCI diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 709528b..e574742 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -95,8 +95,6 @@ #define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */ /* commands to include */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_CACHE diff --git a/include/configs/omap3_cairo.h b/include/configs/omap3_cairo.h index ed79566..81d4b34 100644 --- a/include/configs/omap3_cairo.h +++ b/include/configs/omap3_cairo.h @@ -60,14 +60,8 @@ #define CONFIG_NAND /* commands to include */ -#include - #define CONFIG_CMD_NAND_LOCK_UNLOCK -/* Disable some commands */ -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMI /* iminfo */ - /* * TWL4030 */ diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 4e587e1..70fab4b 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -24,8 +24,6 @@ * Supported U-boot commands * ---------------------------------------------------------------------------- */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_EXT2 @@ -38,11 +36,6 @@ #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING -#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMI /* iminfo */ -#undef CONFIG_CMD_IMLS /* List all found images */ - /* ---------------------------------------------------------------------------- * Supported U-boot features * ---------------------------------------------------------------------------- diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index 8aecb57..89ec73c 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -78,7 +78,6 @@ #endif #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING -#define CONFIG_CMD_NFS /* NFS support */ /*#undef CONFIG_ENV_IS_NOWHERE*/ diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 6783f68..af6ae73 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -89,8 +89,6 @@ #define CONFIG_DOS_PARTITION /* commands to include */ -#include - #define CONFIG_CMD_CACHE #define CONFIG_CMD_EXT2 /* EXT2 Support */ #define CONFIG_CMD_FAT /* FAT support */ @@ -109,11 +107,6 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP -#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMI /* iminfo */ -#undef CONFIG_CMD_IMLS /* List all found images */ - #define CONFIG_SYS_NO_FLASH /* diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h index e88cdaa..4339b05 100644 --- a/include/configs/omap3_mvblx.h +++ b/include/configs/omap3_mvblx.h @@ -114,20 +114,14 @@ #define CONFIG_SYS_NO_FLASH /* commands to include */ -#include - #define CONFIG_CMD_CACHE #define CONFIG_CMD_EXT2 /* EXT2 Support */ #define CONFIG_CMD_FAT /* FAT support */ #define CONFIG_CMD_I2C /* I2C serial bus support */ #define CONFIG_CMD_MMC /* MMC support */ #define CONFIG_CMD_EEPROM -#define CONFIG_CMD_IMI /* iminfo */ -#undef CONFIG_CMD_IMLS /* List all found images */ -#define CONFIG_CMD_NFS /* NFS support */ #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING -#define CONFIG_CMD_FPGA #define CONFIG_CMD_FPGA_LOADMK #define CONFIG_SYS_I2C diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index e1db29a..76bf3b6 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -58,9 +58,6 @@ /* commands to include */ #define CONFIG_CMD_CACHE #define CONFIG_CMD_USB -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMI /* iminfo */ -#undef CONFIG_CMD_NFS /* NFS support */ #ifdef CONFIG_NAND #define CONFIG_CMD_UBI /* UBI-formated MTD partition support */ diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index a8af1c5..49467c9 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -57,14 +57,7 @@ #define CONFIG_SERIAL3 3 /* commands to include */ -#include - #define CONFIG_CMD_CACHE /* Cache control */ -#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMI /* iminfo */ -#undef CONFIG_CMD_IMLS /* List all found images */ -#undef CONFIG_CMD_NFS /* NFS support */ /* * Board NAND Info. diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h index d97e4d4..16ceb91 100644 --- a/include/configs/omap3_sdp3430.h +++ b/include/configs/omap3_sdp3430.h @@ -148,9 +148,6 @@ #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_ENV_SECT_SIZE) /*--------------------------------------------------------------------------*/ -/* commands to include */ -#include - /* Enabled commands */ #define CONFIG_CMD_DHCP /* DHCP Support */ #define CONFIG_CMD_EXT2 /* EXT2 Support */ @@ -159,10 +156,6 @@ #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ #define CONFIG_CMD_MMC /* MMC support */ -/* Disabled commands */ -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMLS /* List all found images */ - /*--------------------------------------------------------------------------*/ /* * MMC boot support diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index 36a52a9..d90cc42 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -78,11 +78,6 @@ #define CONFIG_CMD_NAND_LOCK_UNLOCK /* Enable lock/unlock support */ #endif -#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMI /* iminfo */ -#undef CONFIG_CMD_IMLS /* List all found images */ -#define CONFIG_CMD_NFS /* NFS support */ #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h index 3313f96..95614b9 100644 --- a/include/configs/omap4_panda.h +++ b/include/configs/omap4_panda.h @@ -48,7 +48,6 @@ #define FAT_ENV_INTERFACE "mmc" #define FAT_ENV_DEVICE_AND_PART "0:1" #define FAT_ENV_FILE "uboot.env" -#define CONFIG_CMD_SAVEENV #define CONFIG_ENV_OVERWRITE #endif /* __CONFIG_PANDA_H */ diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h index a837974..072b97e 100644 --- a/include/configs/omap4_sdp4430.h +++ b/include/configs/omap4_sdp4430.h @@ -30,6 +30,5 @@ #define CONFIG_ENV_IS_IN_MMC 1 #define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ #define CONFIG_ENV_OFFSET 0xE0000 -#define CONFIG_CMD_SAVEENV #endif /* __CONFIG_SDP4430_H */ diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index cb12c6c..8647921 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -33,7 +33,6 @@ #define CONFIG_ENV_OFFSET 0xE0000 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) #define CONFIG_SYS_REDUNDAND_ENVIRONMENT -#define CONFIG_CMD_SAVEENV /* Enhance our eMMC support / experience. */ #define CONFIG_CMD_GPT @@ -61,7 +60,6 @@ /* Enabled commands */ #define CONFIG_CMD_DHCP /* DHCP Support */ -#define CONFIG_CMD_NFS /* NFS support */ /* USB Networking options */ #define CONFIG_USB_HOST_ETHER diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index eb3184b..6d0d020 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -229,7 +229,6 @@ /* * U-Boot commands */ -#include #define CONFIG_CMD_ENV #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP @@ -237,7 +236,6 @@ #define CONFIG_CMD_MII #define CONFIG_CMD_PING #define CONFIG_CMD_SAVES -#define CONFIG_CMD_MEMORY #ifdef CONFIG_CMD_BDI #define CONFIG_CLOCKS #endif @@ -249,8 +247,6 @@ #endif #ifdef CONFIG_USE_NAND -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS #define CONFIG_CMD_NAND #define CONFIG_CMD_MTDPARTS @@ -263,11 +259,8 @@ #endif #ifdef CONFIG_USE_SPIFLASH -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_FLASH #define CONFIG_CMD_SPI #define CONFIG_CMD_SF -#define CONFIG_CMD_SAVEENV #endif #if !defined(CONFIG_USE_NAND) && \ @@ -276,7 +269,6 @@ #define CONFIG_ENV_IS_NOWHERE #define CONFIG_SYS_NO_FLASH #define CONFIG_ENV_SIZE (16 << 10) -#undef CONFIG_CMD_IMLS #undef CONFIG_CMD_ENV #endif diff --git a/include/configs/openrd.h b/include/configs/openrd.h index b6f80af..7211314 100644 --- a/include/configs/openrd.h +++ b/include/configs/openrd.h @@ -44,7 +44,6 @@ */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ #define CONFIG_SYS_MVFS -#include #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV #define CONFIG_CMD_MII diff --git a/include/configs/openrisc-generic.h b/include/configs/openrisc-generic.h index d4de3c3..23929c2 100644 --- a/include/configs/openrisc-generic.h +++ b/include/configs/openrisc-generic.h @@ -114,9 +114,6 @@ /* * Command line configuration. */ -#include - - #define CONFIG_CMD_IRQ #define CONFIG_CMD_ELF #define CONFIG_CMD_BSP diff --git a/include/configs/origen.h b/include/configs/origen.h index 5d43229..dae8fd5 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -60,7 +60,6 @@ #define CONFIG_CMD_FS_GENERIC #define CONFIG_CMD_BOOTZ #define CONFIG_SUPPORT_RAW_INITRD -#undef CONFIG_CMD_NFS /* MMC SPL */ #define COPY_BL2_FNPTR_ADDR 0x02020030 diff --git a/include/configs/otc570.h b/include/configs/otc570.h index 2390beb..0cada63 100644 --- a/include/configs/otc570.h +++ b/include/configs/otc570.h @@ -135,11 +135,6 @@ /* * Command line configuration. */ -#include -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_IMLS - #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_NAND diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index a585d70..af3086d 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -891,8 +891,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_IRQ #define CONFIG_CMD_PING #define CONFIG_CMD_I2C diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h index 58dc98a..8231eb4 100644 --- a/include/configs/p1_twr.h +++ b/include/configs/p1_twr.h @@ -422,8 +422,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * Command line configuration. */ -#include - #define CONFIG_CMD_IRQ #define CONFIG_CMD_PING #define CONFIG_CMD_I2C diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h index 4433c7c..eb14003 100644 --- a/include/configs/p3p440.h +++ b/include/configs/p3p440.h @@ -171,8 +171,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP @@ -181,7 +179,6 @@ #define CONFIG_CMD_I2C #define CONFIG_CMD_IRQ #define CONFIG_CMD_MII -#define CONFIG_CMD_NFS #define CONFIG_CMD_PCI #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO diff --git a/include/configs/palmld.h b/include/configs/palmld.h index b54c016..a9f92fa 100644 --- a/include/configs/palmld.h +++ b/include/configs/palmld.h @@ -50,11 +50,7 @@ /* * Bootloader Components Configuration */ -#include - -#undef CONFIG_CMD_NFS #define CONFIG_CMD_ENV -#undef CONFIG_CMD_IMLS #define CONFIG_CMD_MMC #define CONFIG_CMD_IDE #define CONFIG_LCD diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h index 965200a..b68ad3b 100644 --- a/include/configs/palmtc.h +++ b/include/configs/palmtc.h @@ -54,9 +54,6 @@ /* * Bootloader Components Configuration */ -#include - -#undef CONFIG_CMD_NFS #define CONFIG_CMD_ENV #define CONFIG_CMD_MMC #define CONFIG_LCD diff --git a/include/configs/palmtreo680.h b/include/configs/palmtreo680.h index 3817815..3946607 100644 --- a/include/configs/palmtreo680.h +++ b/include/configs/palmtreo680.h @@ -40,16 +40,6 @@ /* * Bootloader Components Configuration */ -#include -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_SETGETDCR -#undef CONFIG_CMD_SOURCE -#undef CONFIG_CMD_XIMG - #define CONFIG_CMD_ENV #define CONFIG_CMD_MMC #define CONFIG_CMD_NAND diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h index 2508702..af2654e 100644 --- a/include/configs/pb1x00.h +++ b/include/configs/pb1x00.h @@ -168,23 +168,14 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF #define CONFIG_CMD_MII #define CONFIG_CMD_PING -#undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_FAT -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_FPGA #undef CONFIG_CMD_IDE -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_RUN -#undef CONFIG_CMD_LOADB #undef CONFIG_CMD_ELF -#undef CONFIG_CMD_BDI #undef CONFIG_CMD_BEDBUG #endif /* __CONFIG_H */ diff --git a/include/configs/pcm030.h b/include/configs/pcm030.h index 31a93c8..83c96a8 100644 --- a/include/configs/pcm030.h +++ b/include/configs/pcm030.h @@ -50,15 +50,12 @@ Serial console configuration /* * Command line configuration. */ -#include - #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM #define CONFIG_CMD_I2C #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MII -#define CONFIG_CMD_NFS #define CONFIG_CMD_PCI #define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index 3cadf34..77e20cf 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -248,7 +248,6 @@ /* * Command line configuration. */ -#include #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP #define CONFIG_CMD_DIAG @@ -260,7 +259,6 @@ #define CONFIG_CMD_IDE #define CONFIG_CMD_IRQ #define CONFIG_CMD_MII -#define CONFIG_CMD_NFS #define CONFIG_CMD_PCI #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h index 17d7bca..e7413c9 100644 --- a/include/configs/pdm360ng.h +++ b/include/configs/pdm360ng.h @@ -381,8 +381,6 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index 10415d3..f9a1d51 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -183,13 +183,6 @@ /* * Command line configuration. */ -#include -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_IMLS - #define CONFIG_CMD_CACHE #define CONFIG_CMD_PING 1 #define CONFIG_CMD_DHCP 1 diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 9bdbf53..6c434f0 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -197,13 +197,6 @@ /* * Command line configuration. */ -#include -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_IMLS - #define CONFIG_CMD_CACHE #define CONFIG_CMD_PING 1 #define CONFIG_CMD_DHCP 1 diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index a8dc0f0..c793865 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -72,10 +72,6 @@ /* * Command line configuration. */ -#include -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMLS - #define CONFIG_CMD_CACHE #define CONFIG_CMD_PING 1 #define CONFIG_CMD_DHCP 1 @@ -96,7 +92,6 @@ /* NOR flash, not available */ #define CONFIG_SYS_NO_FLASH 1 -#undef CONFIG_CMD_FLASH /* NAND flash */ #ifdef CONFIG_CMD_NAND diff --git a/include/configs/pogo_e02.h b/include/configs/pogo_e02.h index 89560ad..3a0992a 100644 --- a/include/configs/pogo_e02.h +++ b/include/configs/pogo_e02.h @@ -34,7 +34,6 @@ */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ #define CONFIG_SYS_MVFS -#include #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV #define CONFIG_CMD_MII diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index af7c076..3edeb08 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -104,8 +104,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_FAT #define CONFIG_CMD_DHCP diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h index 75da8a1..b22637b 100644 --- a/include/configs/qemu-mips.h +++ b/include/configs/qemu-mips.h @@ -45,13 +45,9 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ELF #define CONFIG_CMD_FAT #define CONFIG_CMD_EXT2 -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_LOADS #define CONFIG_CMD_DHCP #define CONFIG_DRIVER_NE2000 diff --git a/include/configs/qemu-mips64.h b/include/configs/qemu-mips64.h index b07ca4e..fae5b05 100644 --- a/include/configs/qemu-mips64.h +++ b/include/configs/qemu-mips64.h @@ -45,13 +45,9 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ELF #define CONFIG_CMD_FAT #define CONFIG_CMD_EXT2 -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_LOADS #define CONFIG_CMD_DHCP #define CONFIG_DRIVER_NE2000 diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h index cf9e2ff..be430ff 100644 --- a/include/configs/qemu-ppce500.h +++ b/include/configs/qemu-ppce500.h @@ -158,8 +158,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); /* * Command line configuration. */ -#include - #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF #define CONFIG_CMD_BOOTZ diff --git a/include/configs/qong.h b/include/configs/qong.h index 8a9847e..f34a54f 100644 --- a/include/configs/qong.h +++ b/include/configs/qong.h @@ -111,9 +111,6 @@ /*********************************************************** * Command definition ***********************************************************/ - -#include - #define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP diff --git a/include/configs/r0p7734.h b/include/configs/r0p7734.h index 708647e..b1d79fd 100644 --- a/include/configs/r0p7734.h +++ b/include/configs/r0p7734.h @@ -18,14 +18,10 @@ #define CONFIG_BOARD_LATE_INIT #define CONFIG_SYS_TEXT_BASE 0x8FFC0000 -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_PING #define CONFIG_CMD_MII -#define CONFIG_CMD_NFS #define CONFIG_CMD_SDRAM #define CONFIG_CMD_ENV -#define CONFIG_CMD_SAVEENV #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index 5371a65..2d1e56a 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -11,10 +11,7 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_CACHE -#define CONFIG_CMD_FLASH #define CONFIG_CMD_PCI #define CONFIG_CMD_PING #define CONFIG_CMD_IDE diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h index 9c62a04..82a056c 100644 --- a/include/configs/r7780mp.h +++ b/include/configs/r7780mp.h @@ -20,12 +20,8 @@ * Command line configuration. */ #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_PCI #define CONFIG_CMD_PING -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_NFS #define CONFIG_CMD_IDE #define CONFIG_CMD_EXT2 #define CONFIG_DOS_PARTITION diff --git a/include/configs/rcar-gen2-common.h b/include/configs/rcar-gen2-common.h index 3845e60..7dd9260 100644 --- a/include/configs/rcar-gen2-common.h +++ b/include/configs/rcar-gen2-common.h @@ -11,17 +11,11 @@ #include -#define CONFIG_CMD_EDITENV -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_DFL #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_RUN -#define CONFIG_CMD_LOADS #define CONFIG_CMD_MII #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP -#define CONFIG_CMD_NFS #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_USB #define CONFIG_CMD_FAT diff --git a/include/configs/rd6281a.h b/include/configs/rd6281a.h index e80949e..a0120b0 100644 --- a/include/configs/rd6281a.h +++ b/include/configs/rd6281a.h @@ -26,7 +26,6 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#include #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV #define CONFIG_CMD_FAT diff --git a/include/configs/rpi-common.h b/include/configs/rpi-common.h index b54cf8b..1012cdd 100644 --- a/include/configs/rpi-common.h +++ b/include/configs/rpi-common.h @@ -120,7 +120,6 @@ #define CONFIG_COMMAND_HISTORY /* Commands */ -#include #define CONFIG_CMD_GPIO #define CONFIG_CMD_MMC #define CONFIG_PARTITION_UUIDS @@ -135,9 +134,6 @@ #include -/* Some things don't make sense on this HW or yet */ -#undef CONFIG_CMD_FPGA - /* Environment */ #define ENV_DEVICE_SETTINGS \ "stdin=serial,lcd\0" \ diff --git a/include/configs/rsk7203.h b/include/configs/rsk7203.h index fc8e967..039880b 100644 --- a/include/configs/rsk7203.h +++ b/include/configs/rsk7203.h @@ -14,12 +14,8 @@ #define CONFIG_CPU_SH7203 1 #define CONFIG_RSK7203 1 -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_NFS #define CONFIG_CMD_PING -#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_CACHE #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/rsk7264.h b/include/configs/rsk7264.h index 2ecf785..c60e233 100644 --- a/include/configs/rsk7264.h +++ b/include/configs/rsk7264.h @@ -15,10 +15,6 @@ #define CONFIG_CPU_SH7264 1 #define CONFIG_RSK7264 1 -#ifndef _CONFIG_CMD_DEFAULT_H -# include -#endif - #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTARGS "console=ttySC3,115200" #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/rsk7269.h b/include/configs/rsk7269.h index 14c1da7..b4fbc9c 100644 --- a/include/configs/rsk7269.h +++ b/include/configs/rsk7269.h @@ -14,10 +14,6 @@ #define CONFIG_CPU_SH7269 1 #define CONFIG_RSK7269 1 -#ifndef _CONFIG_CMD_DEFAULT_H -# include -#endif - #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTARGS "console=ttySC7,115200" #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 16770f0..7994ecf 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -58,16 +58,8 @@ /* PWM */ #define CONFIG_PWM 1 -/* It should define before config_cmd_default.h */ #define CONFIG_SYS_NO_FLASH 1 -/* Command definition */ -#include - -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_MISC -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_XIMG #define CONFIG_CMD_CACHE #define CONFIG_CMD_REGINFO #define CONFIG_CMD_ONENAND diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index 046891e..9497bea 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -52,7 +52,6 @@ /* NOR flash */ #ifndef CONFIG_SYS_NO_FLASH -#define CONFIG_CMD_FLASH #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_PROTECTION diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 01b9ddf..6965d92 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -116,7 +116,6 @@ #define CONFIG_SYS_NO_FLASH /* include default commands */ -#include #include #define BOOT_TARGET_DEVICES(func) \ diff --git a/include/configs/sansa_fuze_plus.h b/include/configs/sansa_fuze_plus.h index 8cce34a..1715678 100644 --- a/include/configs/sansa_fuze_plus.h +++ b/include/configs/sansa_fuze_plus.h @@ -11,7 +11,6 @@ /* U-Boot Commands */ #define CONFIG_SYS_NO_FLASH -#include #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DOS_PARTITION diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h index 11bf504..b2adea9 100644 --- a/include/configs/sbc405.h +++ b/include/configs/sbc405.h @@ -86,8 +86,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_BSP #define CONFIG_CMD_ELF #define CONFIG_CMD_I2C diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 2d264d2..9d89b2a 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -417,8 +417,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_I2C #define CONFIG_CMD_MII #define CONFIG_CMD_PING @@ -427,12 +425,6 @@ #define CONFIG_CMD_PCI #endif -#if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_SAVEENV - #undef CONFIG_CMD_LOADS -#endif - - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index 5b373cb..0717156 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -536,8 +536,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_MII diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 021da50..00aab6b 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -479,10 +479,9 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#include - #define CONFIG_CMD_PING - #define CONFIG_CMD_I2C - #define CONFIG_CMD_REGINFO +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_REGINFO #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI diff --git a/include/configs/sc_sps_1.h b/include/configs/sc_sps_1.h index 0c4ca21..6d35cd3 100644 --- a/include/configs/sc_sps_1.h +++ b/include/configs/sc_sps_1.h @@ -16,7 +16,6 @@ /* U-Boot Commands */ #define CONFIG_SYS_NO_FLASH -#include #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DOS_PARTITION @@ -27,7 +26,6 @@ #define CONFIG_CMD_GPIO #define CONFIG_CMD_MII #define CONFIG_CMD_MMC -#define CONFIG_CMD_NFS #define CONFIG_CMD_PING #define CONFIG_CMD_USB diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h index ecb372f..f367d62 100644 --- a/include/configs/scb9328.h +++ b/include/configs/scb9328.h @@ -30,15 +30,9 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP -#undef CONFIG_CMD_CONSOLE -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_SOURCE - /* * Boot options. Setting delay to -1 stops autostart count down. * NOTE: Sending parameters to kernel depends on kernel version and diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 623be7d..1f1beea 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -124,6 +124,7 @@ #define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ #define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ +#endif /* CONFIG_CMD_FLASH */ #ifdef CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ @@ -134,7 +135,6 @@ #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) #endif -#endif /* CONFIG_CMD_FLASH */ /* * DDR SDRAM diff --git a/include/configs/sh7752evb.h b/include/configs/sh7752evb.h index 7e8565d..f1f9ca8 100644 --- a/include/configs/sh7752evb.h +++ b/include/configs/sh7752evb.h @@ -16,18 +16,13 @@ #define CONFIG_SYS_TEXT_BASE 0x5ff80000 #define CONFIG_SYS_LDSCRIPT "board/renesas/sh7752evb/u-boot.lds" -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_MII #define CONFIG_CMD_PING -#define CONFIG_CMD_NFS #define CONFIG_CMD_DFL #define CONFIG_CMD_SDRAM #define CONFIG_CMD_SF -#define CONFIG_CMD_RUN -#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_MD5SUM #define CONFIG_MD5 -#define CONFIG_CMD_LOADS #define CONFIG_CMD_MMC #define CONFIG_CMD_EXT2 #define CONFIG_DOS_PARTITION diff --git a/include/configs/sh7753evb.h b/include/configs/sh7753evb.h index 857b26f..d7ed65b 100644 --- a/include/configs/sh7753evb.h +++ b/include/configs/sh7753evb.h @@ -16,18 +16,13 @@ #define CONFIG_SYS_TEXT_BASE 0x5ff80000 #define CONFIG_SYS_LDSCRIPT "board/renesas/sh7753evb/u-boot.lds" -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_MII #define CONFIG_CMD_PING -#define CONFIG_CMD_NFS #define CONFIG_CMD_DFL #define CONFIG_CMD_SDRAM #define CONFIG_CMD_SF -#define CONFIG_CMD_RUN -#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_MD5SUM #define CONFIG_MD5 -#define CONFIG_CMD_LOADS #define CONFIG_CMD_MMC #define CONFIG_CMD_EXT2 #define CONFIG_DOS_PARTITION diff --git a/include/configs/sh7757lcr.h b/include/configs/sh7757lcr.h index 18569bd..cf514b6 100644 --- a/include/configs/sh7757lcr.h +++ b/include/configs/sh7757lcr.h @@ -17,17 +17,12 @@ #define CONFIG_SYS_TEXT_BASE 0x8ef80000 #define CONFIG_SYS_LDSCRIPT "board/renesas/sh7757lcr/u-boot.lds" -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_MII #define CONFIG_CMD_PING -#define CONFIG_CMD_NFS #define CONFIG_CMD_SDRAM #define CONFIG_CMD_SF -#define CONFIG_CMD_RUN -#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_MD5SUM #define CONFIG_MD5 -#define CONFIG_CMD_LOADS #define CONFIG_CMD_MMC #define CONFIG_CMD_EXT2 #define CONFIG_DOS_PARTITION diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h index 27ad96e..7148f1d 100644 --- a/include/configs/sh7763rdp.h +++ b/include/configs/sh7763rdp.h @@ -18,12 +18,8 @@ * Command line configuration. */ #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_MII #define CONFIG_CMD_PING -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_NFS #define CONFIG_CMD_JFFS2 #define CONFIG_BOOTDELAY -1 diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h index 9f42ae1..2ba0c58 100644 --- a/include/configs/sh7785lcr.h +++ b/include/configs/sh7785lcr.h @@ -13,14 +13,9 @@ #define CONFIG_CPU_SH7785 1 #define CONFIG_SH7785LCR 1 -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_PCI #define CONFIG_CMD_PING -#define CONFIG_CMD_NFS #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_RUN -#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_SH_ZIMAGEBOOT #define CONFIG_CMD_USB diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index 84029cb..272e3ca 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -46,7 +46,6 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#include #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV diff --git a/include/configs/shmin.h b/include/configs/shmin.h index 8c02afe..11ae15c 100644 --- a/include/configs/shmin.h +++ b/include/configs/shmin.h @@ -15,13 +15,9 @@ /* T-SH7706LSR*/ /* #define CONFIG_T_SH7706LSR 1 */ -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_SDRAM #define CONFIG_CMD_PING -#define CONFIG_CMD_NFS #define CONFIG_CMD_ENV -#define CONFIG_CMD_SAVEENV #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTARGS "console=ttySC0,115200" diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index b61f6a0..0f32594 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -42,10 +42,7 @@ #define CONFIG_SYS_CACHELINE_SIZE 64 /* commands to include */ -#include - #define CONFIG_CMD_ASKENV -#define CONFIG_CMD_ECHO #define CONFIG_CMD_CACHE #define CONFIG_CMD_TIME diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index 71eb81c..7b4b3b0 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -75,8 +75,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_BSP #define CONFIG_CMD_CACHE #define CONFIG_CMD_DATE diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index 080fc3a..08a2e9f 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -63,10 +63,6 @@ /*********************************************************** * Command definition ***********************************************************/ -#include - -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS #undef CONFIG_CMD_NAND #define CONFIG_CMD_CACHE diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h index 6c68596..70ef939 100644 --- a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h @@ -149,14 +149,6 @@ #define CONFIG_SYS_MALLOC_LEN (1 << 20) /* Command line configuration */ -#include -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_SOURCE - #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_FAT diff --git a/include/configs/snowball.h b/include/configs/snowball.h index 126201c..91aaffa 100644 --- a/include/configs/snowball.h +++ b/include/configs/snowball.h @@ -43,7 +43,6 @@ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_CMD_ENV -#define CONFIG_CMD_SAVEENV #define CONFIG_ENV_OFFSET 0x0118000 #define CONFIG_SYS_MMC_ENV_DEV 0 /* SLOT2: eMMC */ @@ -79,20 +78,9 @@ /* * Commands */ -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_BDI -#define CONFIG_CMD_IMI -#define CONFIG_CMD_MISC -#define CONFIG_CMD_RUN -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_CONSOLE -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_LOADB #define CONFIG_CMD_MMC #define CONFIG_CMD_FAT #define CONFIG_CMD_EXT2 -#define CONFIG_CMD_SOURCE #ifndef CONFIG_BOOTDELAY #define CONFIG_BOOTDELAY 1 diff --git a/include/configs/socfpga_arria5.h b/include/configs/socfpga_arria5.h index 70ee4c9..7aee1ce 100644 --- a/include/configs/socfpga_arria5.h +++ b/include/configs/socfpga_arria5.h @@ -13,7 +13,6 @@ /* U-Boot Commands */ #define CONFIG_SYS_NO_FLASH -#include #define CONFIG_DOS_PARTITION #define CONFIG_FAT_WRITE #define CONFIG_HW_WATCHDOG @@ -26,7 +25,6 @@ #define CONFIG_CMD_EXT4 #define CONFIG_CMD_EXT4_WRITE #define CONFIG_CMD_FAT -#define CONFIG_CMD_FPGA #define CONFIG_CMD_FS_GENERIC #define CONFIG_CMD_GREPENV #define CONFIG_CMD_MII diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h index e321381..33d04fd 100644 --- a/include/configs/socfpga_cyclone5.h +++ b/include/configs/socfpga_cyclone5.h @@ -13,7 +13,6 @@ /* U-Boot Commands */ #define CONFIG_SYS_NO_FLASH -#include #define CONFIG_DOS_PARTITION #define CONFIG_FAT_WRITE #define CONFIG_HW_WATCHDOG @@ -26,7 +25,6 @@ #define CONFIG_CMD_EXT4 #define CONFIG_CMD_EXT4_WRITE #define CONFIG_CMD_FAT -#define CONFIG_CMD_FPGA #define CONFIG_CMD_FS_GENERIC #define CONFIG_CMD_GREPENV #define CONFIG_CMD_MII diff --git a/include/configs/socrates.h b/include/configs/socrates.h index c654a0e..292b514 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -314,8 +314,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_BMP #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP @@ -325,7 +323,6 @@ #define CONFIG_CMD_I2C #define CONFIG_CMD_SDRAM #define CONFIG_CMD_MII -#undef CONFIG_CMD_NFS #define CONFIG_CMD_PING #define CONFIG_CMD_SNTP #define CONFIG_CMD_USB diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h index b386c7c..f75c306 100644 --- a/include/configs/spear-common.h +++ b/include/configs/spear-common.h @@ -105,16 +105,11 @@ #define CONFIG_CMD_I2C #define CONFIG_CMD_NAND #define CONFIG_CMD_ENV -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_RUN #define CONFIG_CMD_SAVES #define CONFIG_CMD_MII #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include - /* * Default Environment Varible definitions */ diff --git a/include/configs/stamp9g20.h b/include/configs/stamp9g20.h index 5d51abf..086ebcf 100644 --- a/include/configs/stamp9g20.h +++ b/include/configs/stamp9g20.h @@ -232,12 +232,6 @@ "bootm 22000000" /* Command line & features configuration */ -#include -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADS - #define CONFIG_CMD_NAND #define CONFIG_CMD_USB #define CONFIG_CMD_FAT @@ -246,9 +240,6 @@ #ifdef CONFIG_MACB # define CONFIG_CMD_PING # define CONFIG_CMD_DHCP -#else -# undef CONFIG_CMD_BOOTD -# undef CONFIG_CMD_NFS #endif /* CONFIG_MACB */ #endif /* __CONFIG_H */ diff --git a/include/configs/stm32f429-discovery.h b/include/configs/stm32f429-discovery.h index 84cc19d..46869dd 100644 --- a/include/configs/stm32f429-discovery.h +++ b/include/configs/stm32f429-discovery.h @@ -95,18 +95,13 @@ /* * Command line configuration. */ -#include - #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "U-Boot > " #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_MEM -#define CONFIG_CMD_MISC #define CONFIG_CMD_TIMER #endif /* __CONFIG_H */ diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h index d8f51d8..6379fd3 100644 --- a/include/configs/stv0991.h +++ b/include/configs/stv0991.h @@ -61,9 +61,6 @@ #define CONFIG_CMD_PING #define CONFIG_PHY_RESET_DELAY 10000 /* in usec */ -#include "config_cmd_default.h" -#undef CONFIG_CMD_SAVEENV - #define CONFIG_SYS_MEMTEST_START 0x0000 #define CONFIG_SYS_MEMTEST_END 1024*1024 #define CONFIG_CMD_MEMTEST diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index a0817a0..6676f37 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -292,16 +292,11 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_I2C #define CONFIG_CMD_REGINFO -#if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_SAVEENV - #undef CONFIG_CMD_LOADS -#else +#if !defined(CONFIG_SYS_RAMBOOT) #define CONFIG_CMD_ELF #endif diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index 78ac080..5b1f3ab 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -322,13 +322,10 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM #define CONFIG_CMD_I2C -#define CONFIG_CMD_NFS #define CONFIG_CMD_PING #define CONFIG_CMD_SNTP #define CONFIG_CMD_REGINFO @@ -341,10 +338,7 @@ #define CONFIG_CMD_MII #endif -#if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_SAVEENV - #undef CONFIG_CMD_LOADS -#else +#if !defined(CONFIG_SYS_RAMBOOT) #define CONFIG_CMD_ELF #endif diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 063abd5..aed040b 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -134,8 +134,6 @@ #define CONFIG_CMD_SCSI #endif -#define CONFIG_CMD_MEMORY - #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_CMDLINE_TAG #define CONFIG_INITRD_TAG @@ -160,7 +158,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_CMD_ECHO #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ @@ -188,9 +185,6 @@ #define CONFIG_ENV_OFFSET (544 << 10) /* (8 + 24 + 512) KiB */ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ -#include -#undef CONFIG_CMD_FPGA - #define CONFIG_FAT_WRITE /* enable write access */ #define CONFIG_SPL_FRAMEWORK diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index efd76da..658f8b2 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -273,8 +273,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF #define CONFIG_CMD_ERRATA diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index af5cca6..34f1228 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -100,8 +100,6 @@ #define CONFIG_USB_STORAGE /* commands to include */ -#include - #define CONFIG_CMD_CACHE #define CONFIG_CMD_DHCP #define CONFIG_CMD_EXT2 /* EXT2 Support */ @@ -110,15 +108,11 @@ #define CONFIG_CMD_I2C /* I2C serial bus support */ #define CONFIG_CMD_MII #define CONFIG_CMD_MMC /* MMC support */ -#define CONFIG_CMD_NFS #define CONFIG_CMD_NAND /* NAND support */ #define CONFIG_CMD_PING #define CONFIG_CMD_USB #define CONFIG_CMD_EEPROM -#undef CONFIG_CMD_FLASH /* only NAND on the SOM */ -#undef CONFIG_CMD_IMLS - #define CONFIG_SYS_NO_FLASH #define CONFIG_SYS_I2C #define CONFIG_SYS_OMAP24_I2C_SPEED 400000 diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 49ed79f..c8ec79b 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -94,8 +94,6 @@ #define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */ /* commands to include */ -#include - #define CONFIG_CMD_CACHE #define CONFIG_CMD_EXT2 /* EXT2 Support */ #define CONFIG_CMD_FAT /* FAT support */ @@ -112,11 +110,6 @@ #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING -#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMI /* iminfo */ -#undef CONFIG_CMD_IMLS /* List all found images */ - #define CONFIG_SYS_NO_FLASH #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_OMAP34XX diff --git a/include/configs/taurus.h b/include/configs/taurus.h index cce4b7d..d5b93eb 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -70,14 +70,6 @@ /* * Command line configuration. */ -#include -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_SOURCE - #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_NAND diff --git a/include/configs/tb100.h b/include/configs/tb100.h index b2b4b10..42817ae 100644 --- a/include/configs/tb100.h +++ b/include/configs/tb100.h @@ -68,8 +68,6 @@ /* * Command line configuration */ -#include - #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF #define CONFIG_CMD_PING diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 2d58422..7b4c0d7 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -67,16 +67,6 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_BAUDRATE 115200 -/* include default commands */ -#include - -/* remove unused commands */ -#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ -#undef CONFIG_CMD_FPGA /* FPGA configuration support */ -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_NFS /* NFS support */ - /* turn on command-line edit/hist/auto */ #define CONFIG_COMMAND_HISTORY diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 372a02b..fcfb70e 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -38,8 +38,6 @@ #define CONFIG_INITRD_TAG /* for ramdisk support */ /* commands to include */ -# include - #define CONFIG_CMD_ASKENV #define CONFIG_VERSION_VARIABLE @@ -102,8 +100,6 @@ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#define CONFIG_CMD_ECHO - /* max number of command args */ #define CONFIG_SYS_MAXARGS 16 diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index 27a3dd1..8d52057 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -32,8 +32,6 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG /* required for ramdisk support */ -#include /* u-boot default commands */ - #define CONFIG_VERSION_VARIABLE #define CONFIG_DISPLAY_CPUINFO @@ -61,7 +59,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ #define CONFIG_CMD_ASKEN -#define CONFIG_CMD_ECHO #define CONFIG_OMAP_GPIO #define CONFIG_MMC #define CONFIG_GENERIC_MMC diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 7a95cb8..0aea7d1 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -166,17 +166,7 @@ #define CONFIG_CMD_MTDPARTS #endif -/* - * For commands to use, we take the default list and add a few other - * useful commands. Note that we must have set CONFIG_SYS_NO_FLASH - * prior to this include, in order to skip a few commands. When we do - * have flash, if we expect these commands they must be enabled in that - * config. If desired, a specific list of desired commands can be used - * instead. - */ -#include #define CONFIG_CMD_ASKENV -#define CONFIG_CMD_ECHO #define CONFIG_CMD_BOOTZ #define CONFIG_SUPPORT_RAW_INITRD diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h index ef5a69d..e966134 100644 --- a/include/configs/ti_omap4_common.h +++ b/include/configs/ti_omap4_common.h @@ -78,9 +78,6 @@ #define CONFIG_USB_TTY 1 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 -/* Per-Soc commands */ -#undef CONFIG_CMD_NFS - /* * Environment setup */ diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 3da7816..f3e5a75 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -57,9 +57,6 @@ #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK 48000000 -/* Per-SoC commands */ -#undef CONFIG_CMD_NFS - /* * Environment setup */ diff --git a/include/configs/tk71.h b/include/configs/tk71.h index a9c6d2e..46e8c90 100644 --- a/include/configs/tk71.h +++ b/include/configs/tk71.h @@ -33,7 +33,6 @@ #define CONFIG_DOS_PARTITION #define CONFIG_SUPPORT_VFAT -#include #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV #define CONFIG_CMD_EXT2 diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h index 52d5ae6..78a8e39 100644 --- a/include/configs/tqma6.h +++ b/include/configs/tqma6.h @@ -120,7 +120,6 @@ /* Command definition */ #define CONFIG_CMD_BMODE -#define CONFIG_CMD_ITEST #define CONFIG_ENV_SIZE (SZ_8K) /* Size of malloc() pool */ diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index b004d09..23bf599 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -149,8 +149,6 @@ #define CONFIG_SYS_NAND_MAX_ECCPOS 56 /* commands to include */ -#include - #define CONFIG_CMD_EXT2 /* EXT2 Support */ #define CONFIG_CMD_FAT /* FAT support */ #define CONFIG_CMD_I2C /* I2C serial bus support */ @@ -162,9 +160,6 @@ #define CONFIG_CMD_UBIFS /* UBIFS commands */ #define CONFIG_LZO /* LZO is needed for UBIFS */ -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMI /* iminfo */ #undef CONFIG_CMD_JFFS2 /* JFFS2 Support */ /* needed for ubi */ diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h index b7804d2..8368931 100644 --- a/include/configs/trizepsiv.h +++ b/include/configs/trizepsiv.h @@ -63,10 +63,7 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_FAT -#define CONFIG_CMD_IMLS #define CONFIG_CMD_PING #define CONFIG_CMD_USB diff --git a/include/configs/tt01.h b/include/configs/tt01.h index cf169a4..9501a83 100644 --- a/include/configs/tt01.h +++ b/include/configs/tt01.h @@ -187,13 +187,9 @@ /* * Command definition */ - -#include - #define CONFIG_CMD_DATE #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP -#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_NAND /* * #define CONFIG_CMD_NAND_LOCK_UNLOCK the NAND01... chip does not support diff --git a/include/configs/tx25.h b/include/configs/tx25.h index 622bd53..e7b006c 100644 --- a/include/configs/tx25.h +++ b/include/configs/tx25.h @@ -122,7 +122,6 @@ #define CONFIG_SYS_LONGHELP /* U-Boot commands */ -#include #define CONFIG_CMD_NAND #define CONFIG_CMD_CACHE diff --git a/include/configs/u8500_href.h b/include/configs/u8500_href.h index 5302b1f..6a22571 100644 --- a/include/configs/u8500_href.h +++ b/include/configs/u8500_href.h @@ -62,20 +62,9 @@ /* * Commands */ -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_BDI -#define CONFIG_CMD_IMI -#define CONFIG_CMD_MISC -#define CONFIG_CMD_RUN -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_CONSOLE -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_LOADB #define CONFIG_CMD_MMC #define CONFIG_CMD_FAT #define CONFIG_CMD_EXT2 -#define CONFIG_CMD_SOURCE #define CONFIG_CMD_I2C #ifndef CONFIG_BOOTDELAY @@ -191,7 +180,6 @@ #define CONFIG_MMC_DEV_NUM 1 #define CONFIG_CMD_ENV -#define CONFIG_CMD_SAVEENV /* CMD_ENV is obsolete but used in env_emmc.c */ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_ENV_OFFSET 0x13F80000 #define CONFIG_SYS_MMC_ENV_DEV 0 /* SLOT2: eMMC */ diff --git a/include/configs/usb_a9263.h b/include/configs/usb_a9263.h index 84571f6..4774de5 100644 --- a/include/configs/usb_a9263.h +++ b/include/configs/usb_a9263.h @@ -61,15 +61,6 @@ /* * Command line configuration. */ -#include -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_ITEST -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_LOADS - #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_NAND diff --git a/include/configs/usbarmory.h b/include/configs/usbarmory.h index f29ab2d..4a7702c 100644 --- a/include/configs/usbarmory.h +++ b/include/configs/usbarmory.h @@ -20,13 +20,11 @@ #define CONFIG_MXC_GPIO #include -#include #include /* U-Boot commands */ #define CONFIG_CMD_MEMTEST -#undef CONFIG_CMD_IMLS /* U-Boot environment */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/v38b.h b/include/configs/v38b.h index 688d60e..63049ab 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -85,8 +85,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_FAT #define CONFIG_CMD_I2C #define CONFIG_CMD_IDE diff --git a/include/configs/vct.h b/include/configs/vct.h index ed9378e..b54519d 100644 --- a/include/configs/vct.h +++ b/include/configs/vct.h @@ -83,8 +83,6 @@ /* * Commands */ -#include - #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF #define CONFIG_CMD_EEPROM @@ -97,8 +95,6 @@ !defined(CONFIG_VCT_SMALL_IMAGE) #define CONFIG_CMD_PING #define CONFIG_CMD_SNTP -#else -#undef CONFIG_CMD_NFS #endif /* @@ -128,11 +124,6 @@ #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* re-init HCD after CMD_RESET */ #endif /* CONFIG_CMD_USB */ -#if !defined(CONFIG_VCT_NOR) -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS -#endif - #if defined(CONFIG_VCT_NAND) #define CONFIG_CMD_NAND #endif @@ -293,10 +284,8 @@ int vct_gpio_get(int pin); */ #if defined(CONFIG_VCT_SMALL_IMAGE) #undef CONFIG_CMD_ASKENV -#undef CONFIG_CMD_BDI #undef CONFIG_CMD_BEDBUG #undef CONFIG_CMD_CACHE -#undef CONFIG_CMD_CONSOLE #undef CONFIG_CMD_DHCP #undef CONFIG_CMD_EEPROM #undef CONFIG_CMD_EEPROM @@ -305,16 +294,11 @@ int vct_gpio_get(int pin); #undef CONFIG_CMD_I2C #undef CONFIG_CMD_I2C #undef CONFIG_CMD_IRQ -#undef CONFIG_CMD_ITEST -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_LOADS #undef CONFIG_CMD_LOADY #undef CONFIG_CMD_MII -#undef CONFIG_CMD_MISC #undef CONFIG_CMD_PING #undef CONFIG_CMD_REGINFO #undef CONFIG_CMD_SNTP -#undef CONFIG_CMD_SOURCE #undef CONFIG_CMD_STRINGS #undef CONFIG_CMD_TERMINAL #undef CONFIG_CMD_USB diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h index 107f01a..a88216c 100644 --- a/include/configs/ve8313.h +++ b/include/configs/ve8313.h @@ -331,8 +331,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII #define CONFIG_CMD_PING diff --git a/include/configs/versatile.h b/include/configs/versatile.h index 8c3774a..de23375 100644 --- a/include/configs/versatile.h +++ b/include/configs/versatile.h @@ -81,13 +81,8 @@ /* * Command line configuration. */ -#define CONFIG_CMD_BDI #define CONFIG_CMD_DHCP -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_IMI -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_PING -#define CONFIG_CMD_SAVEENV /* * BOOTP options diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index 0c86779..c36237f 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -142,22 +142,13 @@ #define CONFIG_MENU /*#define CONFIG_MENU_SHOW*/ #define CONFIG_CMD_CACHE -#define CONFIG_CMD_BDI #define CONFIG_CMD_BOOTI #define CONFIG_CMD_UNZIP #define CONFIG_CMD_DHCP #define CONFIG_CMD_PXE #define CONFIG_CMD_ENV -#define CONFIG_CMD_IMI -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_MII #define CONFIG_CMD_PING -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_RUN -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_SOURCE #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION @@ -261,7 +252,6 @@ #ifndef CONFIG_TARGET_VEXPRESS64_JUNO #define CONFIG_SYS_NO_FLASH #else -#define CONFIG_CMD_FLASH #define CONFIG_CMD_ARMFLASH #define CONFIG_SYS_FLASH_CFI 1 #define CONFIG_FLASH_CFI_DRIVER 1 diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h index db78c85..0c1da01 100644 --- a/include/configs/vexpress_common.h +++ b/include/configs/vexpress_common.h @@ -153,18 +153,12 @@ #define CONFIG_SYS_SERIAL1 V2M_UART1 /* Command line configuration */ -#define CONFIG_CMD_BDI #define CONFIG_CMD_DHCP #define CONFIG_CMD_PXE #define CONFIG_MENU #define CONFIG_CMD_ELF #define CONFIG_CMD_ENV -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_IMI -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_PING -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_RUN #define CONFIG_CMD_BOOTZ #define CONFIG_SUPPORT_RAW_INITRD @@ -292,7 +286,6 @@ #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ -#define CONFIG_CMD_SOURCE #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING 1 #define CONFIG_SYS_MAXARGS 16 /* max command args */ diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index dfe316a..c5131af 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -10,7 +10,6 @@ #define __CONFIG_H #include -#include #define CONFIG_VF610 @@ -43,8 +42,6 @@ #define CONFIG_SYS_UART_PORT (1) #define CONFIG_BAUDRATE 115200 -#undef CONFIG_CMD_IMLS - /* NAND support */ #define CONFIG_CMD_NAND #define CONFIG_CMD_NAND_TRIMFFS diff --git a/include/configs/vision2.h b/include/configs/vision2.h index 07cd72c..93c7348 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -123,10 +123,7 @@ * Command definition ***********************************************************/ -#include - #define CONFIG_CMD_SPI -#undef CONFIG_CMD_IMLS #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h index 7dfb6da..e4958ce 100644 --- a/include/configs/vl_ma2sc.h +++ b/include/configs/vl_ma2sc.h @@ -83,12 +83,6 @@ /* * Command line configuration. */ -#include -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_LOADS - #define CONFIG_CMD_BMP #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index c7730fc..3998274 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -357,8 +357,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_I2C #define CONFIG_CMD_MII #define CONFIG_CMD_PING @@ -374,7 +372,6 @@ #if defined(CONFIG_SYS_RAMBOOT) #undef CONFIG_CMD_ENV - #undef CONFIG_CMD_LOADS #endif #define CONFIG_CMD_ELF diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h index 0886ba3..95a69b3 100644 --- a/include/configs/vpac270.h +++ b/include/configs/vpac270.h @@ -67,20 +67,15 @@ /* * Bootloader Components Configuration */ -#include - #define CONFIG_CMD_ENV -#undef CONFIG_CMD_IMLS #define CONFIG_CMD_MMC #define CONFIG_CMD_USB #undef CONFIG_LCD #define CONFIG_CMD_IDE #ifdef CONFIG_ONENAND -#undef CONFIG_CMD_FLASH #define CONFIG_CMD_ONENAND #else -#define CONFIG_CMD_FLASH #undef CONFIG_CMD_ONENAND #endif diff --git a/include/configs/warp.h b/include/configs/warp.h index 39b4919..48e2058 100644 --- a/include/configs/warp.h +++ b/include/configs/warp.h @@ -30,9 +30,6 @@ #define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE #define CONFIG_SUPPORT_EMMC_BOOT -/* Command definition */ -#undef CONFIG_CMD_NFS - /* Watchdog */ #define CONFIG_HW_WATCHDOG #define CONFIG_IMX_WATCHDOG diff --git a/include/configs/wireless_space.h b/include/configs/wireless_space.h index 036c1e4..7219034 100644 --- a/include/configs/wireless_space.h +++ b/include/configs/wireless_space.h @@ -29,7 +29,6 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* no NOR or SPI flash */ -#include #define CONFIG_CMD_ENV #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h index e8eabdb..52d392c 100644 --- a/include/configs/woodburn_common.h +++ b/include/configs/woodburn_common.h @@ -82,9 +82,6 @@ /* * Command definition */ - -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h index 4725fc3..15ee284 100644 --- a/include/configs/work_92105.h +++ b/include/configs/work_92105.h @@ -177,11 +177,6 @@ #define CONFIG_ENV_ADDR 0x80000100 /* - * U-Boot Commands - */ -#include - -/* * Boot Linux */ #define CONFIG_CMDLINE_TAG diff --git a/include/configs/x600.h b/include/configs/x600.h index a07482c..1d4c1a9 100644 --- a/include/configs/x600.h +++ b/include/configs/x600.h @@ -105,24 +105,18 @@ #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV -#define CONFIG_CMD_FPGA #define CONFIG_CMD_FPGA_LOADMK #define CONFIG_CMD_GPIO #define CONFIG_CMD_I2C -#define CONFIG_CMD_MEMORY #define CONFIG_CMD_MII #define CONFIG_CMD_MTDPARTS #define CONFIG_CMD_NAND #define CONFIG_CMD_PING -#define CONFIG_CMD_RUN #define CONFIG_CMD_SAVES #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_LZO -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include - #define CONFIG_BOOTDELAY 3 #define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index 0481cf3..349b06c 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -100,36 +100,15 @@ /*----------------------------------------------------------------------- * Command line configuration. */ -#include - -#define CONFIG_CMD_BDI -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CONSOLE #define CONFIG_CMD_DATE -#define CONFIG_CMD_ECHO -#undef CONFIG_CMD_FLASH -#define CONFIG_CMD_FPGA #define CONFIG_CMD_FPGA_LOADMK #define CONFIG_CMD_GPIO -#define CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS #define CONFIG_CMD_IO #define CONFIG_CMD_IRQ -#define CONFIG_CMD_ITEST -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC -#undef CONFIG_CMD_NFS #define CONFIG_CMD_PCI #define CONFIG_CMD_PING -#define CONFIG_CMD_RUN -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_SETGETDCR -#define CONFIG_CMD_SOURCE #define CONFIG_CMD_TIME #define CONFIG_CMD_GETTIME -#define CONFIG_CMD_XIMG #define CONFIG_CMD_SCSI #define CONFIG_CMD_FAT diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h index fcb76a2..a072464 100644 --- a/include/configs/xaeniax.h +++ b/include/configs/xaeniax.h @@ -59,11 +59,8 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_DHCP #define CONFIG_CMD_DIAG -#define CONFIG_CMD_NFS #define CONFIG_CMD_SDRAM #define CONFIG_CMD_SNTP diff --git a/include/configs/xfi3.h b/include/configs/xfi3.h index 8e6b365..0551580 100644 --- a/include/configs/xfi3.h +++ b/include/configs/xfi3.h @@ -11,7 +11,6 @@ /* U-Boot Commands */ #define CONFIG_SYS_NO_FLASH -#include #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DOS_PARTITION diff --git a/include/configs/xilinx-ppc.h b/include/configs/xilinx-ppc.h index 4f62607..309d68d 100644 --- a/include/configs/xilinx-ppc.h +++ b/include/configs/xilinx-ppc.h @@ -26,7 +26,6 @@ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) /*Cmd*/ -#include #define CONFIG_CMD_ASKENV #define CONFIG_CMD_CACHE #define CONFIG_CMD_DIAG @@ -41,8 +40,6 @@ #undef CONFIG_CMD_PING #undef CONFIG_CMD_DHCP #undef CONFIG_CMD_EEPROM -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_NFS /*Misc*/ #define CONFIG_BOOTDELAY 5/* autoboot after 5 seconds */ diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index ff419c3..ad82ed6 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -69,7 +69,6 @@ #define CONFIG_CMD_EXT4 #define CONFIG_CMD_FAT #define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_MEMORY #define CONFIG_DOS_PARTITION #define CONFIG_CMD_ELF #define CONFIG_MP diff --git a/include/configs/xpedite1000.h b/include/configs/xpedite1000.h index ea747c8..4fafb5a 100644 --- a/include/configs/xpedite1000.h +++ b/include/configs/xpedite1000.h @@ -187,21 +187,17 @@ extern void out32(unsigned int, unsigned long); /* * Command configuration */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM #define CONFIG_CMD_ELF -#define CONFIG_CMD_FLASH #define CONFIG_CMD_I2C #define CONFIG_CMD_IRQ #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MII #define CONFIG_CMD_PCI #define CONFIG_CMD_PING -#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_SNTP /* diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h index a762ec0..669aa53 100644 --- a/include/configs/xpedite517x.h +++ b/include/configs/xpedite517x.h @@ -526,8 +526,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * Command configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP @@ -536,8 +534,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_CMD_DTT #define CONFIG_CMD_EEPROM #define CONFIG_CMD_ELF -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_FLASH #define CONFIG_CMD_I2C #define CONFIG_CMD_IRQ #define CONFIG_CMD_JFFS2 diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h index 9484ccb..34a124c 100644 --- a/include/configs/xpedite520x.h +++ b/include/configs/xpedite520x.h @@ -311,15 +311,11 @@ /* * Command configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM #define CONFIG_CMD_ELF -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_FLASH #define CONFIG_CMD_I2C #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MII diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h index 0391459..58ace2c 100644 --- a/include/configs/xpedite537x.h +++ b/include/configs/xpedite537x.h @@ -381,8 +381,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); /* * Command configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP @@ -391,7 +389,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_CMD_DTT #define CONFIG_CMD_EEPROM #define CONFIG_CMD_ELF -#define CONFIG_CMD_FLASH #define CONFIG_CMD_I2C #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MII @@ -401,7 +398,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_CMD_PCI #define CONFIG_CMD_PCI_ENUM #define CONFIG_CMD_PING -#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_SNTP #define CONFIG_CMD_REGINFO diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h index 09c248a..765aaad 100644 --- a/include/configs/xpedite550x.h +++ b/include/configs/xpedite550x.h @@ -367,15 +367,12 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); /* * Command configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_DTT #define CONFIG_CMD_EEPROM #define CONFIG_CMD_ELF -#define CONFIG_CMD_FLASH #define CONFIG_CMD_I2C #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MII @@ -386,7 +383,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_CMD_PCI_ENUM #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_SNTP #define CONFIG_CMD_USB diff --git a/include/configs/zeus.h b/include/configs/zeus.h index cc1b960..2bc4e1a 100644 --- a/include/configs/zeus.h +++ b/include/configs/zeus.h @@ -51,8 +51,6 @@ /* * Command line configuration. */ -#include - #define CONFIG_CMD_ASKENV #define CONFIG_CMD_CACHE #define CONFIG_CMD_DHCP @@ -62,7 +60,6 @@ #define CONFIG_CMD_I2C #define CONFIG_CMD_IRQ #define CONFIG_CMD_MII -#define CONFIG_CMD_NFS #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h index 49ca978..cff3ba8 100644 --- a/include/configs/zipitz2.h +++ b/include/configs/zipitz2.h @@ -62,11 +62,7 @@ /* * Bootloader Components Configuration */ -#include - -#undef CONFIG_CMD_NFS #define CONFIG_CMD_ENV -#undef CONFIG_CMD_IMLS #define CONFIG_CMD_MMC #define CONFIG_CMD_SPI diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h index 004af38..af7cc49 100644 --- a/include/configs/zmx25.h +++ b/include/configs/zmx25.h @@ -77,7 +77,6 @@ /* * Command line configuration. */ -#include #define CONFIG_CMD_CACHE /* diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index c7b3058..5526214 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -203,7 +203,6 @@ # define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE # define CONFIG_ENV_OFFSET 0xE0000 -# define CONFIG_CMD_SAVEENV #endif /* Default environment */ @@ -271,7 +270,6 @@ #define CONFIG_FPGA #define CONFIG_FPGA_XILINX #define CONFIG_FPGA_ZYNQPL -#define CONFIG_CMD_FPGA #define CONFIG_CMD_FPGA_LOADMK #define CONFIG_CMD_FPGA_LOADP #define CONFIG_CMD_FPGA_LOADBP @@ -299,8 +297,6 @@ #define CONFIG_SYS_LDSCRIPT "arch/arm/mach-zynq/u-boot.lds" /* Commands */ -#include - #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII -- cgit v0.10.2 From da9971d1b3bdb554d4a4ac948119f8b2616bbcce Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Fri, 26 Jun 2015 19:42:24 +0100 Subject: Revert "sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory" This reverts commit f76eba38b3eda905ff3bdc18dd1240d3dcbc6e5a. This patch did not have a full and proper copyright/S-o-b chain. Signed-off-by: Ian Campbell Conflicts: include/configs/sun6i.h include/configs/sun8i.h diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index 8a4770b..0344362 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -119,20 +119,11 @@ void s_init(void) #ifdef CONFIG_SPL_BUILD /* The sunxi internal brom will try to loader external bootloader * from mmc0, nand flash, mmc2. - * - * Unfortunately we can't check how SPL was loaded so assume it's - * always the first SD/MMC controller, unless it was explicitly - * stated that SPL is on nand flash. + * Unfortunately we can't check how SPL was loaded so assume + * it's always the first SD/MMC controller */ u32 spl_boot_device(void) { -#if defined(CONFIG_SPL_NAND_SUPPORT) - /* - * This is compile time configuration informing SPL, that it - * was loaded from nand flash. - */ - return BOOT_DEVICE_NAND; -#else /* * When booting from the SD card, the "eGON.BT0" signature is expected * to be found in memory at the address 0x0004 (see the "mksunxiboot" @@ -153,7 +144,6 @@ u32 spl_boot_device(void) return BOOT_DEVICE_MMC1; else return BOOT_DEVICE_BOARD; -#endif } /* No confirmation data available in SPL yet. Hardcode bootmode */ diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index b628fee..496295d 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -157,8 +157,6 @@ enum sunxi_gpio_number { #define SUN5I_GPB_UART0 2 #define SUN8I_GPB_UART2 2 -#define SUNXI_GPC_NAND 2 - #define SUNXI_GPC_SDC2 3 #define SUN6I_GPC_SDC3 4 diff --git a/arch/arm/include/asm/arch-sunxi/nand.h b/arch/arm/include/asm/arch-sunxi/nand.h deleted file mode 100644 index 22844d8..0000000 --- a/arch/arm/include/asm/arch-sunxi/nand.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * (C) Copyright 2015 Roy Spliet - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _SUNXI_NAND_H -#define _SUNXI_NAND_H - -#include - -struct sunxi_nand -{ - u32 ctl; /* 0x000 Configure and control */ - u32 st; /* 0x004 Status information */ - u32 intr; /* 0x008 Interrupt control */ - u32 timing_ctl; /* 0x00C Timing control */ - u32 timing_cfg; /* 0x010 Timing configure */ - u32 addr_low; /* 0x014 Low word address */ - u32 addr_high; /* 0x018 High word address */ - u32 block_num; /* 0x01C Data block number */ - u32 data_cnt; /* 0x020 Data counter for transfer */ - u32 cmd; /* 0x024 NDFC commands */ - u32 rcmd_set; /* 0x028 Read command set for vendor NAND mem */ - u32 wcmd_set; /* 0x02C Write command set */ - u32 io_data; /* 0x030 IO data */ - u32 ecc_ctl; /* 0x034 ECC configure and control */ - u32 ecc_st; /* 0x038 ECC status and operation info */ - u32 efr; /* 0x03C Enhanced feature */ - u32 err_cnt0; /* 0x040 Corrected error bit counter 0 */ - u32 err_cnt1; /* 0x044 Corrected error bit counter 1 */ - u32 user_data[16]; /* 0x050[16] User data field */ - u32 efnand_st; /* 0x090 EFNAND status */ - u32 res0[3]; - u32 spare_area; /* 0x0A0 Spare area configure */ - u32 pat_id; /* 0x0A4 Pattern ID register */ - u32 rdata_sta_ctl; /* 0x0A8 Read data status control */ - u32 rdata_sta_0; /* 0x0AC Read data status 0 */ - u32 rdata_sta_1; /* 0x0B0 Read data status 1 */ - u32 res1[3]; - u32 mdma_addr; /* 0x0C0 MBUS DMA Address */ - u32 mdma_cnt; /* 0x0C4 MBUS DMA data counter */ -}; - -#define SUNXI_NAND_CTL_EN (1 << 0) -#define SUNXI_NAND_CTL_RST (1 << 1) -#define SUNXI_NAND_CTL_PAGE_SIZE(a) ((fls(a) - 11) << 8) -#define SUNXI_NAND_CTL_RAM_METHOD_DMA (1 << 14) - -#define SUNXI_NAND_ST_CMD_INT (1 << 1) -#define SUNXI_NAND_ST_DMA_INT (1 << 2) -#define SUNXI_NAND_ST_FIFO_FULL (1 << 3) - -#define SUNXI_NAND_CMD_ADDR_CYCLES(a) ((a - 1) << 16); -#define SUNXI_NAND_CMD_SEND_CMD1 (1 << 22) -#define SUNXI_NAND_CMD_WAIT_FLAG (1 << 23) -#define SUNXI_NAND_CMD_ORDER_INTERLEAVE 0 -#define SUNXI_NAND_CMD_ORDER_SEQ (1 << 25) - -#define SUNXI_NAND_ECC_CTL_ECC_EN (1 << 0) -#define SUNXI_NAND_ECC_CTL_PIPELINE (1 << 3) -#define SUNXI_NAND_ECC_CTL_BS_512B (1 << 5) -#define SUNXI_NAND_ECC_CTL_RND_EN (1 << 9) -#define SUNXI_NAND_ECC_CTL_MODE(a) ((a) << 12) -#define SUNXI_NAND_ECC_CTL_RND_SEED(a) ((a) << 16) - -#endif /* _SUNXI_NAND_H */ diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index aa44f50..2a1cd3c 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -280,18 +280,6 @@ config MMC_SUNXI_SLOT_EXTRA slot or emmc on mmc1 - mmc3. Setting this to 1, 2 or 3 will enable support for this. -config SPL_NAND_SUPPORT - bool "SPL/NAND mode support" - depends on SPL - default n - ---help--- - This enables support for booting from NAND internal - memory. U-Boot SPL doesn't detect where is it load from, - therefore this option is needed to properly load image from - flash. Option also disables MMC functionality on U-Boot due to - initialization errors encountered, when both controllers are - enabled. - config USB0_VBUS_PIN string "Vbus enable pin for usb0 (otg)" default "" diff --git a/board/sunxi/board.c b/board/sunxi/board.c index f27967b..ed60e74 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -22,9 +22,6 @@ #ifdef CONFIG_AXP221_POWER #include #endif -#ifdef CONFIG_NAND_SUNXI -#include -#endif #include #include #include @@ -318,21 +315,6 @@ int board_mmc_init(bd_t *bis) } #endif -#ifdef CONFIG_NAND -void board_nand_init(void) -{ - unsigned int pin; - static u8 ports[] = CONFIG_NAND_SUNXI_GPC_PORTS; - - /* Configure AHB muxes to connect output pins with NAND controller */ - for (pin = 0; pin < 16; pin++) - sunxi_gpio_set_cfgpin(SUNXI_GPC(pin), SUNXI_GPC_NAND); - - for (pin = 0; pin < ARRAY_SIZE(ports); pin++) - sunxi_gpio_set_cfgpin(SUNXI_GPC(ports[pin]), SUNXI_GPC_NAND); -} -#endif - void i2c_init_board(void) { #ifdef CONFIG_I2C0_ENABLE diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index a0cf4d5..347ea62 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -73,6 +73,5 @@ obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_spl.o obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_spl.o obj-$(CONFIG_NAND_MXC) += mxc_nand_spl.o obj-$(CONFIG_NAND_MXS) += mxs_nand_spl.o mxs_nand.o -obj-$(CONFIG_NAND_SUNXI) += sunxi_nand_spl.o endif # drivers diff --git a/drivers/mtd/nand/sunxi_nand_spl.c b/drivers/mtd/nand/sunxi_nand_spl.c deleted file mode 100644 index 75982f5..0000000 --- a/drivers/mtd/nand/sunxi_nand_spl.c +++ /dev/null @@ -1,273 +0,0 @@ -/* - * Copyright (c) 2014, Antmicro Ltd - * Copyright (c) 2015, Turtle Solutions - * Copyright (c) 2015, Roy Spliet - * - * SPDX-License-Identifier: GPL-2.0+ - * - * \todo Detect chip parameters (page size, ECC mode, randomisation...) - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -void -nand_init(void) -{ - struct sunxi_ccm_reg * const ccm = - (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - struct sunxi_nand * const nand = (struct sunxi_nand *)SUNXI_NFC_BASE; - u32 val; - - board_nand_init(); - - /* "un-gate" NAND clock and clock source - * This assumes that the clock was already correctly configured by - * BootROM */ - setbits_le32(&ccm->ahb_gate0, (1 << AHB_GATE_OFFSET_NAND0)); -#ifdef CONFIG_MACH_SUN9I - setbits_le32(&ccm->ahb_gate1, (1 << AHB_GATE_OFFSET_DMA)); -#else - setbits_le32(&ccm->ahb_gate0, (1 << AHB_GATE_OFFSET_DMA)); -#endif - setbits_le32(&ccm->nand0_clk_cfg, 0x80000000); - - val = readl(&nand->ctl); - val |= SUNXI_NAND_CTL_RST; - writel(val, &nand->ctl); - - /* Wait until reset pin is deasserted */ - do { - val = readl(&nand->ctl); - if (!(val & SUNXI_NAND_CTL_RST)) - break; - } while (1); - - /** \todo Chip select, currently kind of static */ - val = readl(&nand->ctl); - val &= 0xf0fff0f2; - val |= SUNXI_NAND_CTL_EN; - val |= SUNXI_NAND_CTL_PAGE_SIZE(CONFIG_NAND_SUNXI_PAGE_SIZE); - writel(val, &nand->ctl); - - writel(0x100, &nand->timing_ctl); - writel(0x7ff, &nand->timing_cfg); - - /* reset CMD */ - val = SUNXI_NAND_CMD_SEND_CMD1 | SUNXI_NAND_CMD_WAIT_FLAG | - NAND_CMD_RESET; - writel(val, &nand->cmd); - do { - val = readl(&nand->st); - if (val & (1<<1)) - break; - udelay(1000); - } while (1); - - printf("Nand initialised\n"); -} - -int -nand_wait_timeout(u32 *reg, u32 mask, u32 val) -{ - unsigned long tmo = timer_get_us() + 1000000; /* 1s */ - - while ((readl(reg) & mask) != val) { - if (timer_get_us() > tmo) - return -ETIMEDOUT; - } - - return 0; -} - -/* random seed */ -static const uint16_t random_seed[128] = { - 0x2b75, 0x0bd0, 0x5ca3, 0x62d1, 0x1c93, 0x07e9, 0x2162, 0x3a72, - 0x0d67, 0x67f9, 0x1be7, 0x077d, 0x032f, 0x0dac, 0x2716, 0x2436, - 0x7922, 0x1510, 0x3860, 0x5287, 0x480f, 0x4252, 0x1789, 0x5a2d, - 0x2a49, 0x5e10, 0x437f, 0x4b4e, 0x2f45, 0x216e, 0x5cb7, 0x7130, - 0x2a3f, 0x60e4, 0x4dc9, 0x0ef0, 0x0f52, 0x1bb9, 0x6211, 0x7a56, - 0x226d, 0x4ea7, 0x6f36, 0x3692, 0x38bf, 0x0c62, 0x05eb, 0x4c55, - 0x60f4, 0x728c, 0x3b6f, 0x2037, 0x7f69, 0x0936, 0x651a, 0x4ceb, - 0x6218, 0x79f3, 0x383f, 0x18d9, 0x4f05, 0x5c82, 0x2912, 0x6f17, - 0x6856, 0x5938, 0x1007, 0x61ab, 0x3e7f, 0x57c2, 0x542f, 0x4f62, - 0x7454, 0x2eac, 0x7739, 0x42d4, 0x2f90, 0x435a, 0x2e52, 0x2064, - 0x637c, 0x66ad, 0x2c90, 0x0bad, 0x759c, 0x0029, 0x0986, 0x7126, - 0x1ca7, 0x1605, 0x386a, 0x27f5, 0x1380, 0x6d75, 0x24c3, 0x0f8e, - 0x2b7a, 0x1418, 0x1fd1, 0x7dc1, 0x2d8e, 0x43af, 0x2267, 0x7da3, - 0x4e3d, 0x1338, 0x50db, 0x454d, 0x764d, 0x40a3, 0x42e6, 0x262b, - 0x2d2e, 0x1aea, 0x2e17, 0x173d, 0x3a6e, 0x71bf, 0x25f9, 0x0a5d, - 0x7c57, 0x0fbe, 0x46ce, 0x4939, 0x6b17, 0x37bb, 0x3e91, 0x76db, -}; - -uint32_t ecc_errors = 0; - -static void -nand_config_ecc(struct sunxi_nand *nand, uint32_t page, int syndrome) -{ - static u8 strength[] = {16, 24, 28, 32, 40, 48, 56, 60, 64}; - int i; - uint32_t ecc_mode; - u32 ecc; - u16 seed = 0; - - for (i = 0; i < ARRAY_SIZE(strength); i++) { - if (CONFIG_NAND_SUNXI_ECC_STRENGTH == strength[i]) { - ecc_mode = i; - break; - } - } - - if (i == ARRAY_SIZE(strength)) { - printf("ECC strength unsupported\n"); - return; - } - - ecc = SUNXI_NAND_ECC_CTL_ECC_EN | - SUNXI_NAND_ECC_CTL_PIPELINE | - SUNXI_NAND_ECC_CTL_RND_EN | - SUNXI_NAND_ECC_CTL_MODE(ecc_mode); - - if (CONFIG_NAND_SUNXI_ECC_STEP == 512) - ecc |= SUNXI_NAND_ECC_CTL_BS_512B; - - if (syndrome) - seed = 0x4A80; - else - seed = random_seed[page % ARRAY_SIZE(random_seed)]; - - ecc |= SUNXI_NAND_ECC_CTL_RND_SEED(seed); - - writel(ecc, &nand->ecc_ctl); -} - -/* read CONFIG_NAND_SUNXI_ECC_STEP bytes from real_addr to temp_buf */ -void -nand_read_block(struct sunxi_nand *nand, phys_addr_t src, dma_addr_t dst, - int syndrome) -{ - struct sunxi_dma * const dma = (struct sunxi_dma *)SUNXI_DMA_BASE; - struct sunxi_dma_cfg * const dma_cfg = &dma->ddma[0]; - - uint32_t shift; - uint32_t page; - uint32_t addr; - uint32_t oob_offset; - uint32_t ecc_bytes; - u32 val; - u32 cmd; - - page = src / CONFIG_NAND_SUNXI_PAGE_SIZE; - if (page > 0xFFFF) { - /* TODO: currently this is not supported */ - printf("Reading from address >= %08X is not allowed.\n", - 0xFFFF * CONFIG_NAND_SUNXI_PAGE_SIZE); - return; - } - - shift = src % CONFIG_NAND_SUNXI_PAGE_SIZE; - writel(0, &nand->ecc_st); - - /* ECC_CTL, randomization */ - ecc_bytes = CONFIG_NAND_SUNXI_ECC_STRENGTH * - fls(CONFIG_NAND_SUNXI_ECC_STEP * 8); - ecc_bytes = DIV_ROUND_UP(ecc_bytes, 8); - ecc_bytes += (ecc_bytes & 1); /* Align to 2-bytes */ - ecc_bytes += 4; - - nand_config_ecc(nand, page, syndrome); - if (syndrome) { - /* shift every 1kB in syndrome */ - shift += (shift / CONFIG_NAND_SUNXI_ECC_STEP) * ecc_bytes; - oob_offset = CONFIG_NAND_SUNXI_ECC_STEP + shift; - } else { - oob_offset = CONFIG_NAND_SUNXI_PAGE_SIZE + - (shift / CONFIG_NAND_SUNXI_ECC_STEP) * ecc_bytes; - } - - addr = (page << 16) | shift; - - /* DMA */ - val = readl(&nand->ctl); - writel(val | SUNXI_NAND_CTL_RAM_METHOD_DMA, &nand->ctl); - - writel(oob_offset, &nand->spare_area); - - /* DMAC - * \todo Separate this into a tidy driver */ - writel(0x0, &dma->irq_en); /* clear dma interrupts */ - writel((uint32_t) &nand->io_data , &dma_cfg->src_addr); - writel(dst , &dma_cfg->dst_addr); - writel(0x00007F0F , &dma_cfg->ddma_para); - writel(CONFIG_NAND_SUNXI_ECC_STEP, &dma_cfg->bc); - - val = SUNXI_DMA_CTL_SRC_DRQ(DDMA_SRC_DRQ_NAND) | - SUNXI_DMA_CTL_MODE_IO | - SUNXI_DMA_CTL_SRC_DATA_WIDTH_32 | - SUNXI_DMA_CTL_DST_DRQ(DDMA_DST_DRQ_SDRAM) | - SUNXI_DMA_CTL_DST_DATA_WIDTH_32 | - SUNXI_DMA_CTL_TRIGGER; - writel(val, &dma_cfg->ctl); - - writel(0x00E00530, &nand->rcmd_set); - nand_wait_timeout(&nand->st, SUNXI_NAND_ST_FIFO_FULL, 0); - - writel(1 , &nand->block_num); - writel(addr, &nand->addr_low); - writel(0 , &nand->addr_high); - - /* CMD (PAGE READ) */ - cmd = 0x85E80000; - cmd |= SUNXI_NAND_CMD_ADDR_CYCLES(CONFIG_NAND_SUNXI_ADDR_CYCLES); - cmd |= (syndrome ? SUNXI_NAND_CMD_ORDER_SEQ : - SUNXI_NAND_CMD_ORDER_INTERLEAVE); - writel(cmd, &nand->cmd); - - if(nand_wait_timeout(&nand->st, SUNXI_NAND_ST_DMA_INT, - SUNXI_NAND_ST_DMA_INT)) { - printf("NAND timeout reading data\n"); - return; - } - - if(nand_wait_timeout(&dma_cfg->ctl, SUNXI_DMA_CTL_TRIGGER, 0)) { - printf("NAND timeout reading data\n"); - return; - } - - if (readl(&nand->ecc_st)) - ecc_errors++; -} - -int -nand_spl_load_image(uint32_t offs, unsigned int size, void *dest) -{ - struct sunxi_nand * const nand = (struct sunxi_nand *)SUNXI_NFC_BASE; - dma_addr_t dst_block; - dma_addr_t dst_end; - phys_addr_t addr = offs; - - dst_end = ((dma_addr_t) dest) + size; - - memset((void *)dest, 0x0, size); - ecc_errors = 0; - for (dst_block = (dma_addr_t) dest; dst_block < dst_end; - dst_block += CONFIG_NAND_SUNXI_ECC_STEP, - addr += CONFIG_NAND_SUNXI_ECC_STEP) { - /* syndrome read first 4MiB to match Allwinner BootROM */ - nand_read_block(nand, addr, dst_block, addr < 0x400000); - } - - if (ecc_errors) - printf("Error: %d ECC failures detected\n", ecc_errors); - return ecc_errors == 0; -} - -void -nand_deselect(void) -{} diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h index a3c9408..ea079eb 100644 --- a/include/configs/sun4i.h +++ b/include/configs/sun4i.h @@ -18,7 +18,6 @@ #endif #define CONFIG_SUNXI_USB_PHYS 3 -#define CONFIG_NAND_SUNXI_GPC_PORTS {16, 17, 18, 19, 20, 21, 22, 24} /* * Include common sunxi configuration where most the settings are diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h index 8e13df5..d257659 100644 --- a/include/configs/sun5i.h +++ b/include/configs/sun5i.h @@ -19,9 +19,6 @@ #define CONFIG_SUNXI_USB_PHYS 2 -/* \todo A13 only defines port 19, whereas A10s requires each of these */ -#define CONFIG_NAND_SUNXI_GPC_PORTS {16, 17, 18, 19} - /* * Include common sunxi configuration where most the settings are */ diff --git a/include/configs/sun6i.h b/include/configs/sun6i.h index a0ebc7e..93863b5 100644 --- a/include/configs/sun6i.h +++ b/include/configs/sun6i.h @@ -27,8 +27,6 @@ #define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE #define CONFIG_TIMER_CLK_FREQ 24000000 -#define CONFIG_NAND_SUNXI_GPC_PORTS {24, 25, 26} - /* * Include common sunxi configuration where most the settings are */ diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h index 3d26ce8..56101a9 100644 --- a/include/configs/sun7i.h +++ b/include/configs/sun7i.h @@ -24,8 +24,6 @@ #define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE #define CONFIG_TIMER_CLK_FREQ 24000000 -#define CONFIG_NAND_SUNXI_GPC_PORTS {16, 17, 18, 19, 20, 21, 22, 24} - /* * Include common sunxi configuration where most the settings are */ diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h index fe8c511..4fc6365 100644 --- a/include/configs/sun8i.h +++ b/include/configs/sun8i.h @@ -23,10 +23,8 @@ #define CONFIG_ARMV7_PSCI 1 #if defined(CONFIG_MACH_SUN8I_A23) #define CONFIG_ARMV7_PSCI_NR_CPUS 2 -#define CONFIG_NAND_SUNXI_GPC_PORTS {16, 17, 18} #elif defined(CONFIG_MACH_SUN8I_A33) #define CONFIG_ARMV7_PSCI_NR_CPUS 4 -#define CONFIG_NAND_SUNXI_GPC_PORTS {16} #else #error Unsupported sun8i variant #endif diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index aed040b..9576bc1 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -146,10 +146,8 @@ #define CONFIG_CMD_MMC #define CONFIG_MMC_SUNXI #define CONFIG_MMC_SUNXI_SLOT 0 -#if !defined(CONFIG_SPL_NAND_SUPPORT) #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 /* first detected MMC controller */ -#endif /* CONFIG_SPL_NAND_SUPPORT */ #endif /* 4MB of malloc() pool */ @@ -351,24 +349,6 @@ extern int soft_i2c_gpio_scl; #define CONFIG_ENV_IS_NOWHERE #endif -#ifdef CONFIG_SPL_NAND_SUPPORT -#define CONFIG_NAND -#define CONFIG_SYS_NAND_SELF_INIT -#define CONFIG_NAND_SUNXI -#define CONFIG_CMD_SPL_WRITE_SIZE 0x000400 -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x008000 - -/* \todo Make these parameterisable in kernel config ? */ -#define CONFIG_NAND_SUNXI_PAGE_SIZE 8192 -#define CONFIG_NAND_SUNXI_ECC_STEP 1024 -#define CONFIG_NAND_SUNXI_ECC_STRENGTH 40 -#define CONFIG_NAND_SUNXI_ADDR_CYCLES 5 - -#ifndef CONFIG_NAND_SUNXI_GPC_PORTS -#error "No NAND GPC ports defined, NAND unsupported" -#endif -#endif /* CONFIG_SPL_NAND_SUPPORT */ - #define CONFIG_MISC_INIT_R #define CONFIG_SYS_CONSOLE_IS_IN_ENV -- cgit v0.10.2 From ae68763b6d7193faa4f4007dba7efe983cec604d Mon Sep 17 00:00:00 2001 From: Kevin Smith Date: Mon, 18 May 2015 16:09:45 +0000 Subject: mv-common.h: Include support for device trees Signed-off-by: Kevin Smith Acked-by: Stefan Roese diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index 0d7b34b..b654fff 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -59,6 +59,8 @@ #define CONFIG_BOOTDELAY 3 /* default enable autoboot */ #define CONFIG_PREBOOT +#define CONFIG_OF_LIBFDT /* Device tree support */ + /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is -- cgit v0.10.2 From 3fd38af704f6d4da50fe7dbf9ff018e43b196fb4 Mon Sep 17 00:00:00 2001 From: Kevin Smith Date: Mon, 18 May 2015 16:09:46 +0000 Subject: db-88f6820-gp.h: Load data blobs into lower memory By default on this platform, u-boot loads data into high memory in the range of 0x7Fxxxxxx, which generates a data abort when the kernel tries to read it. Config the u-boot environment to load the device tree and initrd image into lower memory to make them accessible to the kernel. Signed-off-by: Kevin Smith Acked-by: Stefan Roese diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h index c32e078..24dbf6b 100644 --- a/include/configs/db-88f6820-gp.h +++ b/include/configs/db-88f6820-gp.h @@ -62,6 +62,11 @@ #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ #define CONFIG_SYS_ALT_MEMTEST +/* Keep device tree and initrd in lower memory so the kernel can access them */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_high=0x10000000\0" \ + "initrd_high=0x10000000\0" + /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros -- cgit v0.10.2 From 79b4c08fc42cd7f6b51183b5338f337116c6fdf3 Mon Sep 17 00:00:00 2001 From: Haikun Wang Date: Fri, 26 Jun 2015 19:30:27 +0800 Subject: dm: sf: Add Atmel DataFlash spi flash driver Atmel DataFlash chips have commands different from common spi flash commands. Atmel DataFlash also have special page-size. This driver add support for accessing Atmel DataFlash. It is based on the Driver Model. Example: => sf probe 1:0 SPI DataFlash: Detected AT45DB021B with page size 264 Bytes, erase size 264 Bytes, total 264 KiB, revision d => sf erase 0 42000 SF: 270336 bytes @ 0x0 Erased: OK => mw.l 82000000 45444342 20000 => sf write 82000000 0 42000 SF: 270336 bytes @ 0x0 Written: OK => sf read 83000000 0 42000 SF: 270336 bytes @ 0x0 Read: OK => cmp.b 82000000 83000000 42000 Total of 270336 byte(s) were the same Signed-off-by: Haikun Wang Tested-by: Haikun Wang Reviewed-by: Simon Glass Reviewed-by: Chakra Divi Reviewed-by: Jagan Teki diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile index c61b784..87f20bc 100644 --- a/drivers/mtd/spi/Makefile +++ b/drivers/mtd/spi/Makefile @@ -15,6 +15,7 @@ endif #ifndef CONFIG_DM_SPI obj-$(CONFIG_SPI_FLASH) += sf_probe.o #endif +obj-$(CONFIG_SF_DATAFLASH) += sf_dataflash.o obj-$(CONFIG_CMD_SF) += sf.o obj-$(CONFIG_SPI_FLASH) += sf_ops.o sf_params.o obj-$(CONFIG_SPI_FLASH_SANDBOX) += sandbox.o diff --git a/drivers/mtd/spi/sf_dataflash.c b/drivers/mtd/spi/sf_dataflash.c new file mode 100644 index 0000000..d287db8 --- /dev/null +++ b/drivers/mtd/spi/sf_dataflash.c @@ -0,0 +1,711 @@ +/* + * + * Atmel DataFlash probing + * + * Copyright (C) 2004-2009, 2015 Freescale Semiconductor, Inc. + * Haikun Wang (haikun.wang@freescale.com) + * + * SPDX-License-Identifier: GPL-2.0+ +*/ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sf_internal.h" + +/* + * DataFlash is a kind of SPI flash. Most AT45 chips have two buffers in + * each chip, which may be used for double buffered I/O; but this driver + * doesn't (yet) use these for any kind of i/o overlap or prefetching. + * + * Sometimes DataFlash is packaged in MMC-format cards, although the + * MMC stack can't (yet?) distinguish between MMC and DataFlash + * protocols during enumeration. + */ + +/* reads can bypass the buffers */ +#define OP_READ_CONTINUOUS 0xE8 +#define OP_READ_PAGE 0xD2 + +/* group B requests can run even while status reports "busy" */ +#define OP_READ_STATUS 0xD7 /* group B */ + +/* move data between host and buffer */ +#define OP_READ_BUFFER1 0xD4 /* group B */ +#define OP_READ_BUFFER2 0xD6 /* group B */ +#define OP_WRITE_BUFFER1 0x84 /* group B */ +#define OP_WRITE_BUFFER2 0x87 /* group B */ + +/* erasing flash */ +#define OP_ERASE_PAGE 0x81 +#define OP_ERASE_BLOCK 0x50 + +/* move data between buffer and flash */ +#define OP_TRANSFER_BUF1 0x53 +#define OP_TRANSFER_BUF2 0x55 +#define OP_MREAD_BUFFER1 0xD4 +#define OP_MREAD_BUFFER2 0xD6 +#define OP_MWERASE_BUFFER1 0x83 +#define OP_MWERASE_BUFFER2 0x86 +#define OP_MWRITE_BUFFER1 0x88 /* sector must be pre-erased */ +#define OP_MWRITE_BUFFER2 0x89 /* sector must be pre-erased */ + +/* write to buffer, then write-erase to flash */ +#define OP_PROGRAM_VIA_BUF1 0x82 +#define OP_PROGRAM_VIA_BUF2 0x85 + +/* compare buffer to flash */ +#define OP_COMPARE_BUF1 0x60 +#define OP_COMPARE_BUF2 0x61 + +/* read flash to buffer, then write-erase to flash */ +#define OP_REWRITE_VIA_BUF1 0x58 +#define OP_REWRITE_VIA_BUF2 0x59 + +/* + * newer chips report JEDEC manufacturer and device IDs; chip + * serial number and OTP bits; and per-sector writeprotect. + */ +#define OP_READ_ID 0x9F +#define OP_READ_SECURITY 0x77 +#define OP_WRITE_SECURITY_REVC 0x9A +#define OP_WRITE_SECURITY 0x9B /* revision D */ + + +struct dataflash { + uint8_t command[16]; + unsigned short page_offset; /* offset in flash address */ +}; + +/* + * Return the status of the DataFlash device. + */ +static inline int dataflash_status(struct spi_slave *spi) +{ + int ret; + u8 status; + /* + * NOTE: at45db321c over 25 MHz wants to write + * a dummy byte after the opcode... + */ + ret = spi_flash_cmd(spi, OP_READ_STATUS, &status, 1); + return ret ? -EIO : status; +} + +/* + * Poll the DataFlash device until it is READY. + * This usually takes 5-20 msec or so; more for sector erase. + * ready: return > 0 + */ +static int dataflash_waitready(struct spi_slave *spi) +{ + int status; + int timeout = 2 * CONFIG_SYS_HZ; + int timebase; + + timebase = get_timer(0); + do { + status = dataflash_status(spi); + if (status < 0) + status = 0; + + if (status & (1 << 7)) /* RDY/nBSY */ + return status; + + mdelay(3); + } while (get_timer(timebase) < timeout); + + return -ETIME; +} + +/* + * Erase pages of flash. + */ +static int spi_dataflash_erase(struct udevice *dev, u32 offset, size_t len) +{ + struct dataflash *dataflash; + struct spi_flash *spi_flash; + struct spi_slave *spi; + unsigned blocksize; + uint8_t *command; + uint32_t rem; + int status; + + dataflash = dev_get_priv(dev); + spi_flash = dev_get_uclass_priv(dev); + spi = spi_flash->spi; + + blocksize = spi_flash->page_size << 3; + + memset(dataflash->command, 0 , sizeof(dataflash->command)); + command = dataflash->command; + + debug("%s: erase addr=0x%x len 0x%x\n", dev->name, offset, len); + + div_u64_rem(len, spi_flash->page_size, &rem); + if (rem) + return -EINVAL; + div_u64_rem(offset, spi_flash->page_size, &rem); + if (rem) + return -EINVAL; + + status = spi_claim_bus(spi); + if (status) { + debug("SPI DATAFLASH: unable to claim SPI bus\n"); + return status; + } + + while (len > 0) { + unsigned int pageaddr; + int do_block; + /* + * Calculate flash page address; use block erase (for speed) if + * we're at a block boundary and need to erase the whole block. + */ + pageaddr = div_u64(offset, spi_flash->page_size); + do_block = (pageaddr & 0x7) == 0 && len >= blocksize; + pageaddr = pageaddr << dataflash->page_offset; + + command[0] = do_block ? OP_ERASE_BLOCK : OP_ERASE_PAGE; + command[1] = (uint8_t)(pageaddr >> 16); + command[2] = (uint8_t)(pageaddr >> 8); + command[3] = 0; + + debug("%s ERASE %s: (%x) %x %x %x [%d]\n", + dev->name, do_block ? "block" : "page", + command[0], command[1], command[2], command[3], + pageaddr); + + status = spi_flash_cmd_write(spi, command, 4, NULL, 0); + if (status < 0) { + debug("%s: erase send command error!\n", dev->name); + return -EIO; + } + + status = dataflash_waitready(spi); + if (status < 0) { + debug("%s: erase waitready error!\n", dev->name); + return status; + } + + if (do_block) { + offset += blocksize; + len -= blocksize; + } else { + offset += spi_flash->page_size; + len -= spi_flash->page_size; + } + } + + spi_release_bus(spi); + + return 0; +} + +/* + * Read from the DataFlash device. + * offset : Start offset in flash device + * len : Amount to read + * buf : Buffer containing the data + */ +static int spi_dataflash_read(struct udevice *dev, u32 offset, size_t len, + void *buf) +{ + struct dataflash *dataflash; + struct spi_flash *spi_flash; + struct spi_slave *spi; + unsigned int addr; + uint8_t *command; + int status; + + dataflash = dev_get_priv(dev); + spi_flash = dev_get_uclass_priv(dev); + spi = spi_flash->spi; + + memset(dataflash->command, 0 , sizeof(dataflash->command)); + command = dataflash->command; + + debug("%s: erase addr=0x%x len 0x%x\n", dev->name, offset, len); + debug("READ: (%x) %x %x %x\n", + command[0], command[1], command[2], command[3]); + + /* Calculate flash page/byte address */ + addr = (((unsigned)offset / spi_flash->page_size) + << dataflash->page_offset) + + ((unsigned)offset % spi_flash->page_size); + + status = spi_claim_bus(spi); + if (status) { + debug("SPI DATAFLASH: unable to claim SPI bus\n"); + return status; + } + + /* + * Continuous read, max clock = f(car) which may be less than + * the peak rate available. Some chips support commands with + * fewer "don't care" bytes. Both buffers stay unchanged. + */ + command[0] = OP_READ_CONTINUOUS; + command[1] = (uint8_t)(addr >> 16); + command[2] = (uint8_t)(addr >> 8); + command[3] = (uint8_t)(addr >> 0); + + /* plus 4 "don't care" bytes, command len: 4 + 4 "don't care" bytes */ + status = spi_flash_cmd_read(spi, command, 8, buf, len); + + spi_release_bus(spi); + + return status; +} + +/* + * Write to the DataFlash device. + * offset : Start offset in flash device + * len : Amount to write + * buf : Buffer containing the data + */ +int spi_dataflash_write(struct udevice *dev, u32 offset, size_t len, + const void *buf) +{ + struct dataflash *dataflash; + struct spi_flash *spi_flash; + struct spi_slave *spi; + uint8_t *command; + unsigned int pageaddr, addr, to, writelen; + size_t remaining = len; + u_char *writebuf = (u_char *)buf; + int status = -EINVAL; + + dataflash = dev_get_priv(dev); + spi_flash = dev_get_uclass_priv(dev); + spi = spi_flash->spi; + + memset(dataflash->command, 0 , sizeof(dataflash->command)); + command = dataflash->command; + + debug("%s: write 0x%x..0x%x\n", dev->name, offset, (offset + len)); + + pageaddr = ((unsigned)offset / spi_flash->page_size); + to = ((unsigned)offset % spi_flash->page_size); + if (to + len > spi_flash->page_size) + writelen = spi_flash->page_size - to; + else + writelen = len; + + status = spi_claim_bus(spi); + if (status) { + debug("SPI DATAFLASH: unable to claim SPI bus\n"); + return status; + } + + while (remaining > 0) { + debug("write @ %d:%d len=%d\n", pageaddr, to, writelen); + + /* + * REVISIT: + * (a) each page in a sector must be rewritten at least + * once every 10K sibling erase/program operations. + * (b) for pages that are already erased, we could + * use WRITE+MWRITE not PROGRAM for ~30% speedup. + * (c) WRITE to buffer could be done while waiting for + * a previous MWRITE/MWERASE to complete ... + * (d) error handling here seems to be mostly missing. + * + * Two persistent bits per page, plus a per-sector counter, + * could support (a) and (b) ... we might consider using + * the second half of sector zero, which is just one block, + * to track that state. (On AT91, that sector should also + * support boot-from-DataFlash.) + */ + + addr = pageaddr << dataflash->page_offset; + + /* (1) Maybe transfer partial page to Buffer1 */ + if (writelen != spi_flash->page_size) { + command[0] = OP_TRANSFER_BUF1; + command[1] = (addr & 0x00FF0000) >> 16; + command[2] = (addr & 0x0000FF00) >> 8; + command[3] = 0; + + debug("TRANSFER: (%x) %x %x %x\n", + command[0], command[1], command[2], command[3]); + + status = spi_flash_cmd_write(spi, command, 4, NULL, 0); + if (status < 0) { + debug("%s: write(name); + return -EIO; + } + + status = dataflash_waitready(spi); + if (status < 0) { + debug("%s: write(name); + return status; + } + } + + /* (2) Program full page via Buffer1 */ + addr += to; + command[0] = OP_PROGRAM_VIA_BUF1; + command[1] = (addr & 0x00FF0000) >> 16; + command[2] = (addr & 0x0000FF00) >> 8; + command[3] = (addr & 0x000000FF); + + debug("PROGRAM: (%x) %x %x %x\n", + command[0], command[1], command[2], command[3]); + + status = spi_flash_cmd_write(spi, command, + 4, writebuf, writelen); + if (status < 0) { + debug("%s: write send command error!\n", dev->name); + return -EIO; + } + + status = dataflash_waitready(spi); + if (status < 0) { + debug("%s: write waitready error!\n", dev->name); + return status; + } + +#ifdef CONFIG_SPI_DATAFLASH_WRITE_VERIFY + /* (3) Compare to Buffer1 */ + addr = pageaddr << dataflash->page_offset; + command[0] = OP_COMPARE_BUF1; + command[1] = (addr & 0x00FF0000) >> 16; + command[2] = (addr & 0x0000FF00) >> 8; + command[3] = 0; + + debug("COMPARE: (%x) %x %x %x\n", + command[0], command[1], command[2], command[3]); + + status = spi_flash_cmd_write(spi, command, + 4, writebuf, writelen); + if (status < 0) { + debug("%s: write(compare) send command error!\n", + dev->name); + return -EIO; + } + + status = dataflash_waitready(spi); + + /* Check result of the compare operation */ + if (status & (1 << 6)) { + printf("SPI DataFlash: write compare page %u, err %d\n", + pageaddr, status); + remaining = 0; + status = -EIO; + break; + } else { + status = 0; + } + +#endif /* CONFIG_SPI_DATAFLASH_WRITE_VERIFY */ + remaining = remaining - writelen; + pageaddr++; + to = 0; + writebuf += writelen; + + if (remaining > spi_flash->page_size) + writelen = spi_flash->page_size; + else + writelen = remaining; + } + + spi_release_bus(spi); + + return 0; +} + +static int add_dataflash(struct udevice *dev, char *name, int nr_pages, + int pagesize, int pageoffset, char revision) +{ + struct spi_flash *spi_flash; + struct dataflash *dataflash; + + dataflash = dev_get_priv(dev); + spi_flash = dev_get_uclass_priv(dev); + + dataflash->page_offset = pageoffset; + + spi_flash->name = name; + spi_flash->page_size = pagesize; + spi_flash->size = nr_pages * pagesize; + spi_flash->erase_size = pagesize; + +#ifndef CONFIG_SPL_BUILD + printf("SPI DataFlash: Detected %s with page size ", spi_flash->name); + print_size(spi_flash->page_size, ", erase size "); + print_size(spi_flash->erase_size, ", total "); + print_size(spi_flash->size, ""); + printf(", revision %c", revision); + puts("\n"); +#endif + + return 0; +} + +struct flash_info { + char *name; + + /* + * JEDEC id has a high byte of zero plus three data bytes: + * the manufacturer id, then a two byte device id. + */ + uint32_t jedec_id; + + /* The size listed here is what works with OP_ERASE_PAGE. */ + unsigned nr_pages; + uint16_t pagesize; + uint16_t pageoffset; + + uint16_t flags; +#define SUP_POW2PS 0x0002 /* supports 2^N byte pages */ +#define IS_POW2PS 0x0001 /* uses 2^N byte pages */ +}; + +static struct flash_info dataflash_data[] = { + /* + * NOTE: chips with SUP_POW2PS (rev D and up) need two entries, + * one with IS_POW2PS and the other without. The entry with the + * non-2^N byte page size can't name exact chip revisions without + * losing backwards compatibility for cmdlinepart. + * + * Those two entries have different name spelling format in order to + * show their difference obviously. + * The upper case refer to the chip isn't in normal 2^N bytes page-size + * mode. + * The lower case refer to the chip is in normal 2^N bytes page-size + * mode. + * + * These newer chips also support 128-byte security registers (with + * 64 bytes one-time-programmable) and software write-protection. + */ + { "AT45DB011B", 0x1f2200, 512, 264, 9, SUP_POW2PS}, + { "at45db011d", 0x1f2200, 512, 256, 8, SUP_POW2PS | IS_POW2PS}, + + { "AT45DB021B", 0x1f2300, 1024, 264, 9, SUP_POW2PS}, + { "at45db021d", 0x1f2300, 1024, 256, 8, SUP_POW2PS | IS_POW2PS}, + + { "AT45DB041x", 0x1f2400, 2048, 264, 9, SUP_POW2PS}, + { "at45db041d", 0x1f2400, 2048, 256, 8, SUP_POW2PS | IS_POW2PS}, + + { "AT45DB081B", 0x1f2500, 4096, 264, 9, SUP_POW2PS}, + { "at45db081d", 0x1f2500, 4096, 256, 8, SUP_POW2PS | IS_POW2PS}, + + { "AT45DB161x", 0x1f2600, 4096, 528, 10, SUP_POW2PS}, + { "at45db161d", 0x1f2600, 4096, 512, 9, SUP_POW2PS | IS_POW2PS}, + + { "AT45DB321x", 0x1f2700, 8192, 528, 10, 0}, /* rev C */ + + { "AT45DB321x", 0x1f2701, 8192, 528, 10, SUP_POW2PS}, + { "at45db321d", 0x1f2701, 8192, 512, 9, SUP_POW2PS | IS_POW2PS}, + + { "AT45DB642x", 0x1f2800, 8192, 1056, 11, SUP_POW2PS}, + { "at45db642d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS}, +}; + +static struct flash_info *jedec_probe(struct spi_slave *spi, u8 *id) +{ + int tmp; + uint32_t jedec; + struct flash_info *info; + int status; + + /* + * JEDEC also defines an optional "extended device information" + * string for after vendor-specific data, after the three bytes + * we use here. Supporting some chips might require using it. + * + * If the vendor ID isn't Atmel's (0x1f), assume this call failed. + * That's not an error; only rev C and newer chips handle it, and + * only Atmel sells these chips. + */ + if (id[0] != 0x1f) + return NULL; + + jedec = id[0]; + jedec = jedec << 8; + jedec |= id[1]; + jedec = jedec << 8; + jedec |= id[2]; + + for (tmp = 0, info = dataflash_data; + tmp < ARRAY_SIZE(dataflash_data); + tmp++, info++) { + if (info->jedec_id == jedec) { + if (info->flags & SUP_POW2PS) { + status = dataflash_status(spi); + if (status < 0) { + debug("SPI DataFlash: status error %d\n", + status); + return NULL; + } + if (status & 0x1) { + if (info->flags & IS_POW2PS) + return info; + } else { + if (!(info->flags & IS_POW2PS)) + return info; + } + } else { + return info; + } + } + } + + /* + * Treat other chips as errors ... we won't know the right page + * size (it might be binary) even when we can tell which density + * class is involved (legacy chip id scheme). + */ + printf("SPI DataFlash: Unsupported flash IDs: "); + printf("manuf %02x, jedec %04x, ext_jedec %04x\n", + id[0], jedec, id[3] << 8 | id[4]); + return NULL; +} + +/* + * Detect and initialize DataFlash device, using JEDEC IDs on newer chips + * or else the ID code embedded in the status bits: + * + * Device Density ID code #Pages PageSize Offset + * AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9 + * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1024 264 9 + * AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9 + * AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9 + * AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10 + * AT45DB0321B 32Mbit (4M) xx1101xx (0x34) 8192 528 10 + * AT45DB0642 64Mbit (8M) xx111xxx (0x3c) 8192 1056 11 + * AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11 + */ +static int spi_dataflash_probe(struct udevice *dev) +{ + struct spi_slave *spi = dev_get_parentdata(dev); + struct spi_flash *spi_flash; + struct flash_info *info; + u8 idcode[5]; + int ret, status = 0; + + spi_flash = dev_get_uclass_priv(dev); + spi_flash->dev = dev; + + ret = spi_claim_bus(spi); + if (ret) + return ret; + + ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode)); + if (ret) { + printf("SPI DataFlash: Failed to get idcodes\n"); + goto err_read_cmd; + } + + /* + * Try to detect dataflash by JEDEC ID. + * If it succeeds we know we have either a C or D part. + * D will support power of 2 pagesize option. + * Both support the security register, though with different + * write procedures. + */ + info = jedec_probe(spi, idcode); + if (info != NULL) + add_dataflash(dev, info->name, info->nr_pages, + info->pagesize, info->pageoffset, + (info->flags & SUP_POW2PS) ? 'd' : 'c'); + else { + /* + * Older chips support only legacy commands, identifing + * capacity using bits in the status byte. + */ + status = dataflash_status(spi); + if (status <= 0 || status == 0xff) { + printf("SPI DataFlash: read status error %d\n", status); + if (status == 0 || status == 0xff) + status = -ENODEV; + goto err_read_cmd; + } + /* + * if there's a device there, assume it's dataflash. + * board setup should have set spi->max_speed_max to + * match f(car) for continuous reads, mode 0 or 3. + */ + switch (status & 0x3c) { + case 0x0c: /* 0 0 1 1 x x */ + status = add_dataflash(dev, "AT45DB011B", + 512, 264, 9, 0); + break; + case 0x14: /* 0 1 0 1 x x */ + status = add_dataflash(dev, "AT45DB021B", + 1024, 264, 9, 0); + break; + case 0x1c: /* 0 1 1 1 x x */ + status = add_dataflash(dev, "AT45DB041x", + 2048, 264, 9, 0); + break; + case 0x24: /* 1 0 0 1 x x */ + status = add_dataflash(dev, "AT45DB081B", + 4096, 264, 9, 0); + break; + case 0x2c: /* 1 0 1 1 x x */ + status = add_dataflash(dev, "AT45DB161x", + 4096, 528, 10, 0); + break; + case 0x34: /* 1 1 0 1 x x */ + status = add_dataflash(dev, "AT45DB321x", + 8192, 528, 10, 0); + break; + case 0x38: /* 1 1 1 x x x */ + case 0x3c: + status = add_dataflash(dev, "AT45DB642x", + 8192, 1056, 11, 0); + break; + /* obsolete AT45DB1282 not (yet?) supported */ + default: + dev_info(&spi->dev, "unsupported device (%x)\n", + status & 0x3c); + status = -ENODEV; + goto err_read_cmd; + } + } + + /* Assign spi data */ + spi_flash->spi = spi; + spi_flash->memory_map = spi->memory_map; + spi_flash->dual_flash = spi->option; + + spi_release_bus(spi); + + return 0; + +err_read_cmd: + spi_release_bus(spi); + + return status; +} + +static const struct dm_spi_flash_ops spi_dataflash_ops = { + .read = spi_dataflash_read, + .write = spi_dataflash_write, + .erase = spi_dataflash_erase, +}; + +static const struct udevice_id spi_dataflash_ids[] = { + { .compatible = "atmel,at45", }, + { .compatible = "atmel,dataflash", }, + { } +}; + +U_BOOT_DRIVER(spi_dataflash) = { + .name = "spi_dataflash", + .id = UCLASS_SPI_FLASH, + .of_match = spi_dataflash_ids, + .probe = spi_dataflash_probe, + .priv_auto_alloc_size = sizeof(struct dataflash), + .ops = &spi_dataflash_ops, +}; -- cgit v0.10.2 From 69a27ea80b81ea38078a8657324516ec042ee49f Mon Sep 17 00:00:00 2001 From: Haikun Wang Date: Fri, 26 Jun 2015 19:30:41 +0800 Subject: dm: ls1021aqds: dts: Use "spi_dataflash" driver instead of "spi_flash_std" for DSPI flash The type of DSPI flash on ls1021aqds is AT45DB021, it has specail commands and page-size. Use the special spi flash driver instead of "spi_flash_std" driver. Signed-off-by: Haikun Wang Tested-by: Haikun Wang Reviewed-by: Simon Glass Reviewed-by: Jagan Teki diff --git a/arch/arm/dts/ls1021a-qds.dts b/arch/arm/dts/ls1021a-qds.dts index 8367811..e634292 100644 --- a/arch/arm/dts/ls1021a-qds.dts +++ b/arch/arm/dts/ls1021a-qds.dts @@ -30,7 +30,7 @@ dspiflash: at45db021d@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spi-flash"; + compatible = "atmel,dataflash"; spi-max-frequency = <16000000>; spi-cpol; spi-cpha; -- cgit v0.10.2 From e5493d4e49cb399c5a506f080fd8b4fa2faf3a19 Mon Sep 17 00:00:00 2001 From: Haikun Wang Date: Mon, 29 Jun 2015 13:08:46 +0530 Subject: arm: ls102xa: Enable Driver Model SPI for ls1021aqds Enable Driver Model SPI for ls1021aqds board. DSPI and QSPI is enabled only when boot from QSPI. DSPI and QSPI are compatible under Driver Model SPI. Signed-off-by: Haikun Wang Tested-by: Haikun Wang Reviewed-by: Jagan Teki diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 5c9d275..46c609a 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -407,15 +407,24 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION -/* QSPI */ +/* SPI */ #ifdef CONFIG_QSPI_BOOT +/* QSPI */ #define CONFIG_FSL_QSPI #define QSPI0_AMBA_BASE 0x40000000 #define FSL_QSPI_FLASH_SIZE (1 << 24) #define FSL_QSPI_FLASH_NUM 2 +#define CONFIG_SPI_FLASH_SPANSION +/* DSPI */ +#define CONFIG_FSL_DSPI + +/* DM SPI */ +#if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI) #define CONFIG_CMD_SF -#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_DM_SPI_FLASH +#define CONFIG_SF_DATAFLASH +#endif #endif /* -- cgit v0.10.2 From 9dd3d3c00c3125f510b899b89432586bf260a3de Mon Sep 17 00:00:00 2001 From: Haikun Wang Date: Sat, 27 Jun 2015 21:46:13 +0530 Subject: arm: ls102xa: Enable Driver Model SPI for ls1021atwr Enable Driver Model SPI for ls1021atwr board. DSPI and QSPI only be enabled when boot from QSPI. DSPI and QSPI are compatible under Driver Model SPI. Signed-off-by: Haikun Wang Tested-by: Review Code-CDREVIEW Tested-by: Haikun Wang Reviewed-by: Prabhakar Kushwaha Reviewed-by: Jagan Teki diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 446d562..233b3d0 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -250,15 +250,20 @@ #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION -/* QSPI */ +/* SPI */ #ifdef CONFIG_QSPI_BOOT +/* QSPI */ #define CONFIG_FSL_QSPI #define QSPI0_AMBA_BASE 0x40000000 #define FSL_QSPI_FLASH_SIZE (1 << 24) #define FSL_QSPI_FLASH_NUM 2 +#define CONFIG_SPI_FLASH_STMICRO +/* DM SPI */ +#if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI) #define CONFIG_CMD_SF -#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_DM_SPI_FLASH +#endif #endif /* -- cgit v0.10.2 From ecfbaa869aa8bd318a017e557faefac2353e9a60 Mon Sep 17 00:00:00 2001 From: Haikun Wang Date: Sat, 27 Jun 2015 21:51:05 +0530 Subject: defconfig: ls1021a: Add OF_CONTROL and DM support PI and QSPI only work when boot from QSPI on ls1021a. This patch only enable options in qspi boot defconfig. Signed-off-by: Haikun Wang Tested-by: Haikun Wang Signed-off-by: Jagan Teki diff --git a/configs/ls1021aqds_qspi_defconfig b/configs/ls1021aqds_qspi_defconfig index 1db9129..6a1f711 100644 --- a/configs/ls1021aqds_qspi_defconfig +++ b/configs/ls1021aqds_qspi_defconfig @@ -3,4 +3,8 @@ CONFIG_TARGET_LS1021AQDS=y CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_SETEXPR is not set +CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds" +CONFIG_OF_CONTROL=y +CONFIG_DM=y +CONFIG_DM_SPI=y CONFIG_SPI_FLASH=y diff --git a/configs/ls1021atwr_qspi_defconfig b/configs/ls1021atwr_qspi_defconfig index 9eb88b3..420cfe7 100644 --- a/configs/ls1021atwr_qspi_defconfig +++ b/configs/ls1021atwr_qspi_defconfig @@ -3,4 +3,8 @@ CONFIG_TARGET_LS1021ATWR=y CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_SETEXPR is not set +CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr" +CONFIG_OF_CONTROL=y +CONFIG_DM=y +CONFIG_DM_SPI=y CONFIG_SPI_FLASH=y -- cgit v0.10.2 From 9fe6d8716e090f3b2dd3f4604acfced124b8a2fc Mon Sep 17 00:00:00 2001 From: Daniel Schwierzeck Date: Mon, 27 Apr 2015 07:42:04 +0200 Subject: mtd, spi: Add MTD layer driver Add MTD layer driver for spi, original patch from: http://git.denx.de/?p=u-boot/u-boot-mips.git;a=commitdiff;h=bb246819cdc90493dd7089eaa51b9e639765cced Changes from Heiko Schocher against this patch: - Remove compile error if not defining CONFIG_SPI_FLASH_MTD: LD drivers/mtd/spi/built-in.o drivers/mtd/spi/sf_probe.o: In function `spi_flash_mtd_unregister': /home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: multiple definition of `spi_flash_mtd_unregister' drivers/mtd/spi/sf_params.o:/home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: first defined here drivers/mtd/spi/sf_ops.o: In function `spi_flash_mtd_unregister': /home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: multiple definition of `spi_flash_mtd_unregister' drivers/mtd/spi/sf_params.o:/home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: first defined here make[1]: *** [drivers/mtd/spi/built-in.o] Fehler 1 make: *** [drivers/mtd/spi] Fehler 2 - Add a README entry. - Add correct writebufsize, to fit with Linux v3.14 MTD, UBI/UBIFS sync. Note (From Jagan): For testing raw mtd parition erase/read/write operations using cmd_sf, sf_mtd should be required to register the spi flash device to MTD layer but the sf_mtd_info ops were not required until and unless if we use any flash filesystem layer say for example UBI. Due to this the foot-print got increased ~290bytes in non-UBI case here that should be acceptible. Signed-off-by: Daniel Schwierzeck Signed-off-by: Heiko Schocher Tested-by: Jagannadh Teki Reviewed-by: Jagannadh Teki diff --git a/README b/README index 8109e5d..168d824 100644 --- a/README +++ b/README @@ -3090,6 +3090,15 @@ CBFS (Coreboot Filesystem) support memories can be connected with a given cs line. Currently Xilinx Zynq qspi supports these type of connections. + CONFIG_SPI_FLASH_MTD spi-flash MTD layer + + Define this option to use mtd support for spi flash layer, this + adapter is for translating mtd_read/mtd_write commands into + spi_flash_read/spi_flash_write commands. It is not intended to + use it within sf_cmd or the SPI flash subsystem. Such an adapter + is needed for subsystems like UBI which can only operate on top + of the MTD layer. + - SystemACE Support: CONFIG_SYSTEMACE diff --git a/common/cmd_sf.c b/common/cmd_sf.c index 342021d..ed3e398 100644 --- a/common/cmd_sf.c +++ b/common/cmd_sf.c @@ -139,8 +139,6 @@ static int do_spi_flash_probe(int argc, char * const argv[]) return 1; } - if (flash) - spi_flash_free(flash); flash = new; #endif diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile index 87f20bc..ed46648 100644 --- a/drivers/mtd/spi/Makefile +++ b/drivers/mtd/spi/Makefile @@ -18,5 +18,6 @@ obj-$(CONFIG_SPI_FLASH) += sf_probe.o obj-$(CONFIG_SF_DATAFLASH) += sf_dataflash.o obj-$(CONFIG_CMD_SF) += sf.o obj-$(CONFIG_SPI_FLASH) += sf_ops.o sf_params.o +obj-$(CONFIG_SPI_FLASH_MTD) += sf_mtd.o obj-$(CONFIG_SPI_FLASH_SANDBOX) += sandbox.o obj-$(CONFIG_SPI_M95XXX) += eeprom_m95xxx.o diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h index 4158e13..81eea8c 100644 --- a/drivers/mtd/spi/sf_internal.h +++ b/drivers/mtd/spi/sf_internal.h @@ -218,4 +218,9 @@ int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd, int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, size_t len, void *data); +#ifdef CONFIG_SPI_FLASH_MTD +int spi_flash_mtd_register(struct spi_flash *flash); +void spi_flash_mtd_unregister(void); +#endif + #endif /* _SF_INTERNAL_H_ */ diff --git a/drivers/mtd/spi/sf_mtd.c b/drivers/mtd/spi/sf_mtd.c new file mode 100644 index 0000000..0b9cb62 --- /dev/null +++ b/drivers/mtd/spi/sf_mtd.c @@ -0,0 +1,104 @@ +/* + * Copyright (C) 2012-2014 Daniel Schwierzeck, daniel.schwierzeck@gmail.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +static struct mtd_info sf_mtd_info; +static char sf_mtd_name[8]; + +static int spi_flash_mtd_erase(struct mtd_info *mtd, struct erase_info *instr) +{ + struct spi_flash *flash = mtd->priv; + int err; + + instr->state = MTD_ERASING; + + err = spi_flash_erase(flash, instr->addr, instr->len); + if (err) { + instr->state = MTD_ERASE_FAILED; + instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN; + return -EIO; + } + + instr->state = MTD_ERASE_DONE; + mtd_erase_callback(instr); + + return 0; +} + +static int spi_flash_mtd_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + struct spi_flash *flash = mtd->priv; + int err; + + err = spi_flash_read(flash, from, len, buf); + if (!err) + *retlen = len; + + return err; +} + +static int spi_flash_mtd_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) +{ + struct spi_flash *flash = mtd->priv; + int err; + + err = spi_flash_write(flash, to, len, buf); + if (!err) + *retlen = len; + + return err; +} + +static void spi_flash_mtd_sync(struct mtd_info *mtd) +{ +} + +static int spi_flash_mtd_number(void) +{ +#ifdef CONFIG_SYS_MAX_FLASH_BANKS + return CONFIG_SYS_MAX_FLASH_BANKS; +#else + return 0; +#endif +} + +int spi_flash_mtd_register(struct spi_flash *flash) +{ + memset(&sf_mtd_info, 0, sizeof(sf_mtd_info)); + sprintf(sf_mtd_name, "nor%d", spi_flash_mtd_number()); + + sf_mtd_info.name = sf_mtd_name; + sf_mtd_info.type = MTD_NORFLASH; + sf_mtd_info.flags = MTD_CAP_NORFLASH; + sf_mtd_info.writesize = 1; + sf_mtd_info.writebufsize = flash->page_size; + + sf_mtd_info._erase = spi_flash_mtd_erase; + sf_mtd_info._read = spi_flash_mtd_read; + sf_mtd_info._write = spi_flash_mtd_write; + sf_mtd_info._sync = spi_flash_mtd_sync; + + sf_mtd_info.size = flash->size; + sf_mtd_info.priv = flash; + + /* Only uniform flash devices for now */ + sf_mtd_info.numeraseregions = 0; + sf_mtd_info.erasesize = flash->sector_size; + + return add_mtd_device(&sf_mtd_info); +} + +void spi_flash_mtd_unregister(void) +{ + del_mtd_device(&sf_mtd_info); +} diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c index 201471c..e0283dc 100644 --- a/drivers/mtd/spi/sf_probe.c +++ b/drivers/mtd/spi/sf_probe.c @@ -372,11 +372,9 @@ int spi_flash_probe_slave(struct spi_slave *spi, struct spi_flash *flash) puts(" Full access #define CONFIG_SPI_FLASH_BAR\n"); } #endif - - /* Release spi bus */ - spi_release_bus(spi); - - return 0; +#ifdef CONFIG_SPI_FLASH_MTD + ret = spi_flash_mtd_register(flash); +#endif err_read_id: spi_release_bus(spi); @@ -430,6 +428,9 @@ struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node, void spi_flash_free(struct spi_flash *flash) { +#ifdef CONFIG_SPI_FLASH_MTD + spi_flash_mtd_unregister(); +#endif spi_free_slave(flash->spi); free(flash); } -- cgit v0.10.2 From 09c3280754f8f68a4d7fc0ee397a92b38c4f59e4 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Mon, 27 Apr 2015 07:42:05 +0200 Subject: mtd, nand: Move common functions from cmd_nand.c to common place Move common functions from cmd_nand.c (for calculating offset and size from cmdline paramter) to common place, so they could used from other commands which use mtd partitions. For onenand the arg_off_size() is left in common/cmd_onenand.c. It should use now the common arg_off() function, but as I could not test onenand I let it there ... Signed-off-by: Heiko Schocher Acked-by: Scott Wood Reviewed-by: Jagannadh Teki diff --git a/common/cmd_nand.c b/common/cmd_nand.c index 9433c80..1482462 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -133,115 +133,6 @@ static int set_dev(int dev) return 0; } -static inline int str2off(const char *p, loff_t *num) -{ - char *endptr; - - *num = simple_strtoull(p, &endptr, 16); - return *p != '\0' && *endptr == '\0'; -} - -static inline int str2long(const char *p, ulong *num) -{ - char *endptr; - - *num = simple_strtoul(p, &endptr, 16); - return *p != '\0' && *endptr == '\0'; -} - -static int get_part(const char *partname, int *idx, loff_t *off, loff_t *size, - loff_t *maxsize) -{ -#ifdef CONFIG_CMD_MTDPARTS - struct mtd_device *dev; - struct part_info *part; - u8 pnum; - int ret; - - ret = mtdparts_init(); - if (ret) - return ret; - - ret = find_dev_and_part(partname, &dev, &pnum, &part); - if (ret) - return ret; - - if (dev->id->type != MTD_DEV_TYPE_NAND) { - puts("not a NAND device\n"); - return -1; - } - - *off = part->offset; - *size = part->size; - *maxsize = part->size; - *idx = dev->id->num; - - ret = set_dev(*idx); - if (ret) - return ret; - - return 0; -#else - puts("offset is not a number\n"); - return -1; -#endif -} - -static int arg_off(const char *arg, int *idx, loff_t *off, loff_t *size, - loff_t *maxsize) -{ - if (!str2off(arg, off)) - return get_part(arg, idx, off, size, maxsize); - - if (*off >= nand_info[*idx].size) { - puts("Offset exceeds device limit\n"); - return -1; - } - - *maxsize = nand_info[*idx].size - *off; - *size = *maxsize; - return 0; -} - -static int arg_off_size(int argc, char *const argv[], int *idx, - loff_t *off, loff_t *size, loff_t *maxsize) -{ - int ret; - - if (argc == 0) { - *off = 0; - *size = nand_info[*idx].size; - *maxsize = *size; - goto print; - } - - ret = arg_off(argv[0], idx, off, size, maxsize); - if (ret) - return ret; - - if (argc == 1) - goto print; - - if (!str2off(argv[1], size)) { - printf("'%s' is not a number\n", argv[1]); - return -1; - } - - if (*size > *maxsize) { - puts("Size exceeds partition or device limit\n"); - return -1; - } - -print: - printf("device %d ", *idx); - if (*size == nand_info[*idx].size) - puts("whole chip\n"); - else - printf("offset 0x%llx, size 0x%llx\n", - (unsigned long long)*off, (unsigned long long)*size); - return 0; -} - #ifdef CONFIG_CMD_NAND_LOCK_UNLOCK static void print_status(ulong start, ulong end, ulong erasesize, int status) { @@ -322,7 +213,12 @@ int do_nand_env_oob(cmd_tbl_t *cmdtp, int argc, char *const argv[]) goto usage; /* We don't care about size, or maxsize. */ - if (arg_off(argv[2], &idx, &addr, &maxsize, &maxsize)) { + if (mtd_arg_off(argv[2], &idx, &addr, &maxsize, &maxsize, + MTD_DEV_TYPE_NAND, nand_info[idx].size)) { + puts("Offset or partition name expected\n"); + return 1; + } + if (set_dev(idx)) { puts("Offset or partition name expected\n"); return 1; } @@ -597,8 +493,12 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("\nNAND %s: ", cmd); /* skip first two or three arguments, look for offset and size */ - if (arg_off_size(argc - o, argv + o, &dev, &off, &size, - &maxsize) != 0) + if (mtd_arg_off_size(argc - o, argv + o, &dev, &off, &size, + &maxsize, MTD_DEV_TYPE_NAND, + nand_info[dev].size) != 0) + return 1; + + if (set_dev(dev)) return 1; nand = &nand_info[dev]; @@ -658,7 +558,12 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (s && !strcmp(s, ".raw")) { raw = 1; - if (arg_off(argv[3], &dev, &off, &size, &maxsize)) + if (mtd_arg_off(argv[3], &dev, &off, &size, &maxsize, + MTD_DEV_TYPE_NAND, + nand_info[dev].size)) + return 1; + + if (set_dev(dev)) return 1; nand = &nand_info[dev]; @@ -675,8 +580,13 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) rwsize = pagecount * (nand->writesize + nand->oobsize); } else { - if (arg_off_size(argc - 3, argv + 3, &dev, - &off, &size, &maxsize) != 0) + if (mtd_arg_off_size(argc - 3, argv + 3, &dev, &off, + &size, &maxsize, + MTD_DEV_TYPE_NAND, + nand_info[dev].size) != 0) + return 1; + + if (set_dev(dev)) return 1; /* size is unspecified */ @@ -814,8 +724,12 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (s && !strcmp(s, ".allexcept")) allexcept = 1; - if (arg_off_size(argc - 2, argv + 2, &dev, &off, &size, - &maxsize) < 0) + if (mtd_arg_off_size(argc - 2, argv + 2, &dev, &off, &size, + &maxsize, MTD_DEV_TYPE_NAND, + nand_info[dev].size) < 0) + return 1; + + if (set_dev(dev)) return 1; if (!nand_unlock(&nand_info[dev], off, size, allexcept)) { diff --git a/common/cmd_onenand.c b/common/cmd_onenand.c index 06cc140..feab01a 100644 --- a/common/cmd_onenand.c +++ b/common/cmd_onenand.c @@ -24,15 +24,8 @@ static struct mtd_info *mtd; static loff_t next_ofs; static loff_t skip_ofs; -static inline int str2long(char *p, ulong *num) -{ - char *endptr; - - *num = simple_strtoul(p, &endptr, 16); - return (*p != '\0' && *endptr == '\0') ? 1 : 0; -} - -static int arg_off_size(int argc, char * const argv[], ulong *off, size_t *size) +static int arg_off_size_onenand(int argc, char * const argv[], ulong *off, + size_t *size) { if (argc >= 1) { if (!(str2long(argv[0], off))) { @@ -399,7 +392,7 @@ static int do_onenand_read(cmd_tbl_t * cmdtp, int flag, int argc, char * const a addr = (ulong)simple_strtoul(argv[1], NULL, 16); printf("\nOneNAND read: "); - if (arg_off_size(argc - 2, argv + 2, &ofs, &len) != 0) + if (arg_off_size_onenand(argc - 2, argv + 2, &ofs, &len) != 0) return 1; ret = onenand_block_read(ofs, len, &retlen, (u8 *)addr, oob); @@ -425,7 +418,7 @@ static int do_onenand_write(cmd_tbl_t * cmdtp, int flag, int argc, char * const addr = (ulong)simple_strtoul(argv[1], NULL, 16); printf("\nOneNAND write: "); - if (arg_off_size(argc - 2, argv + 2, &ofs, &len) != 0) + if (arg_off_size_onenand(argc - 2, argv + 2, &ofs, &len) != 0) return 1; ret = onenand_block_write(ofs, len, &retlen, (u8 *)addr, withoob); @@ -461,7 +454,7 @@ static int do_onenand_erase(cmd_tbl_t * cmdtp, int flag, int argc, char * const printf("\nOneNAND erase: "); /* skip first two or three arguments, look for offset and size */ - if (arg_off_size(argc, argv, &ofs, &len) != 0) + if (arg_off_size_onenand(argc, argv, &ofs, &len) != 0) return 1; ret = onenand_block_erase(ofs, len, force); @@ -486,7 +479,7 @@ static int do_onenand_test(cmd_tbl_t * cmdtp, int flag, int argc, char * const a printf("\nOneNAND test: "); /* skip first two or three arguments, look for offset and size */ - if (arg_off_size(argc - 1, argv + 1, &ofs, &len) != 0) + if (arg_off_size_onenand(argc - 1, argv + 1, &ofs, &len) != 0) return 1; ret = onenand_block_test(ofs, len); diff --git a/common/cmd_test.c b/common/cmd_test.c index c93fe78..7285f75 100644 --- a/common/cmd_test.c +++ b/common/cmd_test.c @@ -5,15 +5,6 @@ * SPDX-License-Identifier: GPL-2.0+ */ -/* - * Define _STDBOOL_H here to avoid macro expansion of true and false. - * If the future code requires macro true or false, remove this define - * and undef true and false before U_BOOT_CMD. This define and comment - * shall be removed if change to U_BOOT_CMD is made to take string - * instead of stringifying it. - */ -#define _STDBOOL_H - #include #include #include @@ -191,6 +182,9 @@ static int do_test(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return expr; } +#undef true +#undef false + U_BOOT_CMD( test, CONFIG_SYS_MAXARGS, 1, do_test, "minimal test like /bin/sh", diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile index 5467a95..a623f4c 100644 --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile @@ -5,8 +5,8 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq (,$(findstring y,$(CONFIG_MTD_DEVICE)$(CONFIG_CMD_NAND)$(CONFIG_CMD_ONENAND))) -obj-y += mtdcore.o +ifneq (,$(findstring y,$(CONFIG_MTD_DEVICE)$(CONFIG_CMD_NAND)$(CONFIG_CMD_ONENAND)$(CONFIG_CMD_SF))) +obj-y += mtdcore.o mtd_uboot.o endif obj-$(CONFIG_MTD_PARTITIONS) += mtdpart.o obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o diff --git a/drivers/mtd/mtd_uboot.c b/drivers/mtd/mtd_uboot.c new file mode 100644 index 0000000..7197007 --- /dev/null +++ b/drivers/mtd/mtd_uboot.c @@ -0,0 +1,99 @@ +/* + * (C) Copyright 2014 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include +#include +#include + +static int get_part(const char *partname, int *idx, loff_t *off, loff_t *size, + loff_t *maxsize, int devtype) +{ +#ifdef CONFIG_CMD_MTDPARTS + struct mtd_device *dev; + struct part_info *part; + u8 pnum; + int ret; + + ret = mtdparts_init(); + if (ret) + return ret; + + ret = find_dev_and_part(partname, &dev, &pnum, &part); + if (ret) + return ret; + + if (dev->id->type != devtype) { + printf("not same typ %d != %d\n", dev->id->type, devtype); + return -1; + } + + *off = part->offset; + *size = part->size; + *maxsize = part->size; + *idx = dev->id->num; + + return 0; +#else + puts("offset is not a number\n"); + return -1; +#endif +} + +int mtd_arg_off(const char *arg, int *idx, loff_t *off, loff_t *size, + loff_t *maxsize, int devtype, int chipsize) +{ + if (!str2off(arg, off)) + return get_part(arg, idx, off, size, maxsize, devtype); + + if (*off >= chipsize) { + puts("Offset exceeds device limit\n"); + return -1; + } + + *maxsize = chipsize - *off; + *size = *maxsize; + return 0; +} + +int mtd_arg_off_size(int argc, char *const argv[], int *idx, loff_t *off, + loff_t *size, loff_t *maxsize, int devtype, int chipsize) +{ + int ret; + + if (argc == 0) { + *off = 0; + *size = chipsize; + *maxsize = *size; + goto print; + } + + ret = mtd_arg_off(argv[0], idx, off, size, maxsize, devtype, + chipsize); + if (ret) + return ret; + + if (argc == 1) + goto print; + + if (!str2off(argv[1], size)) { + printf("'%s' is not a number\n", argv[1]); + return -1; + } + + if (*size > *maxsize) { + puts("Size exceeds partition or device limit\n"); + return -1; + } + +print: + printf("device %d ", *idx); + if (*size == chipsize) + puts("whole chip\n"); + else + printf("offset 0x%llx, size 0x%llx\n", + (unsigned long long)*off, (unsigned long long)*size); + return 0; +} diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 8666413..33669da 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -482,5 +482,10 @@ int add_mtd_device(struct mtd_info *mtd); int del_mtd_device(struct mtd_info *mtd); int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int); int del_mtd_partitions(struct mtd_info *); + +int mtd_arg_off(const char *arg, int *idx, loff_t *off, loff_t *size, + loff_t *maxsize, int devtype, int chipsize); +int mtd_arg_off_size(int argc, char *const argv[], int *idx, loff_t *off, + loff_t *size, loff_t *maxsize, int devtype, int chipsize); #endif #endif /* __MTD_MTD_H__ */ diff --git a/include/vsprintf.h b/include/vsprintf.h index 09c8abd..d2fcca3 100644 --- a/include/vsprintf.h +++ b/include/vsprintf.h @@ -196,4 +196,6 @@ int vscnprintf(char *buf, size_t size, const char *fmt, va_list args); */ void print_grouped_ull(unsigned long long int_val, int digits); +bool str2off(const char *p, loff_t *num); +bool str2long(const char *p, ulong *num); #endif diff --git a/lib/vsprintf.c b/lib/vsprintf.c index bedc865..a9b8a3a 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -909,3 +909,19 @@ void print_grouped_ull(unsigned long long int_val, int digits) grab = 3; } } + +bool str2off(const char *p, loff_t *num) +{ + char *endptr; + + *num = simple_strtoull(p, &endptr, 16); + return *p != '\0' && *endptr == '\0'; +} + +bool str2long(const char *p, ulong *num) +{ + char *endptr; + + *num = simple_strtoul(p, &endptr, 16); + return *p != '\0' && *endptr == '\0'; +} -- cgit v0.10.2 From 2ec1a4059cd0421653b19979a046e9fb7296652f Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Mon, 27 Apr 2015 07:42:06 +0200 Subject: spi, sf: Use offset and size in sf cmd from mtdpartition With this patch, it is possible to get the offset and size information from the mtdpartiton setting in "mtdparts", similiar to the "nand" commandos. => sf sf - SPI flash sub-system Usage: sf probe [[bus:]cs] [hz] [mode] - init flash device on given SPI bus and chip select sf read addr offset|partition len - read `len' bytes starting at `offset' to memory at `addr' sf write addr offset|partition len - write `len' bytes from memory at `addr' to flash at `offset' sf erase offset|partition [+]len - erase `len' bytes from `offset' `+len' round up `len' to block size sf update addr offset|partition len - erase and write `len' bytes from memory at `addr' to flash at `offset' => for example "env" is defined in mtdparts: => sf read 13000000 env device 0 offset 0xd0000, size 0x10000 SF: 65536 bytes @ 0xd0000 Read: OK zynq-uboot> mtdparts add nor0 0x10000@0x0 env zynq-uboot> sf erase env 0x10000 SF: 65536 bytes @ 0x0 Erased: OK zynq-uboot> sf write 0x100 env device 0 offset 0x0, size 0x10000 SF: 65536 bytes @ 0x0 Written: OK zynq-uboot> sf read 0x40000 env device 0 offset 0x0, size 0x10000 SF: 65536 bytes @ 0x0 Read: OK Signed-off-by: Heiko Schocher Tested-by: Jagannadh Teki Reviewed-by: Jagannadh Teki diff --git a/common/cmd_sf.c b/common/cmd_sf.c index ed3e398..9bced29 100644 --- a/common/cmd_sf.c +++ b/common/cmd_sf.c @@ -13,6 +13,8 @@ #include #include #include +#include +#include #include #include @@ -254,23 +256,21 @@ static int spi_flash_update(struct spi_flash *flash, u32 offset, static int do_spi_flash_read_write(int argc, char * const argv[]) { unsigned long addr; - unsigned long offset; - unsigned long len; void *buf; char *endp; int ret = 1; + int dev = 0; + loff_t offset, len, maxsize; - if (argc < 4) + if (argc < 3) return -1; addr = simple_strtoul(argv[1], &endp, 16); if (*argv[1] == 0 || *endp != 0) return -1; - offset = simple_strtoul(argv[2], &endp, 16); - if (*argv[2] == 0 || *endp != 0) - return -1; - len = simple_strtoul(argv[3], &endp, 16); - if (*argv[3] == 0 || *endp != 0) + + if (mtd_arg_off_size(argc - 2, &argv[2], &dev, &offset, &len, + &maxsize, MTD_DEV_TYPE_NOR, flash->size)) return -1; /* Consistency checking */ @@ -309,31 +309,31 @@ static int do_spi_flash_read_write(int argc, char * const argv[]) static int do_spi_flash_erase(int argc, char * const argv[]) { - unsigned long offset; - unsigned long len; - char *endp; int ret; + int dev = 0; + loff_t offset, len, maxsize; + ulong size; if (argc < 3) return -1; - offset = simple_strtoul(argv[1], &endp, 16); - if (*argv[1] == 0 || *endp != 0) + if (mtd_arg_off(argv[1], &dev, &offset, &len, &maxsize, + MTD_DEV_TYPE_NOR, flash->size)) return -1; - ret = sf_parse_len_arg(argv[2], &len); + ret = sf_parse_len_arg(argv[2], &size); if (ret != 1) return -1; /* Consistency checking */ - if (offset + len > flash->size) { + if (offset + size > flash->size) { printf("ERROR: attempting %s past flash size (%#x)\n", argv[0], flash->size); return 1; } - ret = spi_flash_erase(flash, offset, len); - printf("SF: %zu bytes @ %#x Erased: %s\n", (size_t)len, (u32)offset, + ret = spi_flash_erase(flash, offset, size); + printf("SF: %zu bytes @ %#x Erased: %s\n", (size_t)size, (u32)offset, ret ? "ERROR" : "OK"); return ret == 0 ? 0 : 1; @@ -558,13 +558,17 @@ U_BOOT_CMD( "SPI flash sub-system", "probe [[bus:]cs] [hz] [mode] - init flash device on given SPI bus\n" " and chip select\n" - "sf read addr offset len - read `len' bytes starting at\n" - " `offset' to memory at `addr'\n" - "sf write addr offset len - write `len' bytes from memory\n" - " at `addr' to flash at `offset'\n" - "sf erase offset [+]len - erase `len' bytes from `offset'\n" - " `+len' round up `len' to block size\n" - "sf update addr offset len - erase and write `len' bytes from memory\n" - " at `addr' to flash at `offset'" + "sf read addr offset|partition len - read `len' bytes starting at\n" + " `offset' or from start of mtd\n" + " `partition'to memory at `addr'\n" + "sf write addr offset|partition len - write `len' bytes from memory\n" + " at `addr' to flash at `offset'\n" + " or to start of mtd `partition'\n" + "sf erase offset|partition [+]len - erase `len' bytes from `offset'\n" + " or from start of mtd `partition'\n" + " `+len' round up `len' to block size\n" + "sf update addr offset|partition len - erase and write `len' bytes from memory\n" + " at `addr' to flash at `offset'\n" + " or to start of mtd `partition'\n" SF_TEST_HELP ); -- cgit v0.10.2 From 8ee81b7f9b675cb675119a998b04ca843d24ddcd Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Mon, 27 Apr 2015 07:42:07 +0200 Subject: mtd, spi: Check if flash pointer is used If flash pointer is used free it, before probing a new flash and storing it in flash. Signed-off-by: Heiko Schocher Tested-by: Jagannadh Teki Reviewed-by: Jagannadh Teki diff --git a/common/cmd_sf.c b/common/cmd_sf.c index 9bced29..aef8c2a 100644 --- a/common/cmd_sf.c +++ b/common/cmd_sf.c @@ -135,7 +135,12 @@ static int do_spi_flash_probe(int argc, char * const argv[]) flash = dev_get_uclass_priv(new); #else + if (flash) + spi_flash_free(flash); + new = spi_flash_probe(bus, cs, speed, mode); + flash = new; + if (!new) { printf("Failed to initialize SPI flash at %u:%u\n", bus, cs); return 1; -- cgit v0.10.2 From 9c5a70dbe88072efeaef941b441cc3e89f33b546 Mon Sep 17 00:00:00 2001 From: Haikun Wang Date: Mon, 29 Jun 2015 17:15:52 +0800 Subject: sf: update sst25wf040b flash params sst25wf040b doesn't support Auto Address Increment Programming command. Remove SST_WR flag. Signed-off-by: Haikun Wang Tested-by: Haikun Wang Reviewed-by: Jagannadh Teki diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c index c12e8c6..4a4a3af 100644 --- a/drivers/mtd/spi/sf_params.c +++ b/drivers/mtd/spi/sf_params.c @@ -100,7 +100,7 @@ const struct spi_flash_params spi_flash_params_table[] = { {"SST25WF010", 0xbf2502, 0x0, 64 * 1024, 2, RD_NORM, SECT_4K | SST_WR}, {"SST25WF020", 0xbf2503, 0x0, 64 * 1024, 4, RD_NORM, SECT_4K | SST_WR}, {"SST25WF040", 0xbf2504, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K | SST_WR}, - {"SST25WF040B", 0x621613, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K | SST_WR}, + {"SST25WF040B", 0x621613, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K}, {"SST25WF080", 0xbf2505, 0x0, 64 * 1024, 16, RD_NORM, SECT_4K | SST_WR}, #endif #ifdef CONFIG_SPI_FLASH_WINBOND /* WINBOND */ -- cgit v0.10.2 From 9c6b05cb724e18d1db3f9e1a75b2272572f06fbd Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Mon, 29 Jun 2015 17:22:01 -0400 Subject: Prepare v2015.07-rc3 Signed-off-by: Tom Rini diff --git a/Makefile b/Makefile index 0a674bf..37cc4c3 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2015 PATCHLEVEL = 07 SUBLEVEL = -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = # *DOCUMENTATION* -- cgit v0.10.2 From 8b2eb776b13055e71f94367c06a26c5e3a902f16 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Mon, 13 Apr 2015 13:37:05 +0300 Subject: arc: implement slave cores kick-start for Linux kernel With new SMP-enabled CPUs with ARC HS38 cores and corresponding support in Linux kernel it's required to add basic SMP support in U-Boot. Currently we assume the one and only core starts execution after power-on. So most of things in U-Boot is handled in UP mode. But when U-Boot is used for loading and starting Linux kernel right before jumping to kernel's entry point U-Boot: [1] Sets all slave cores to jump to the same address [kernel's entry point] [2] Really starts all slav cores In ARC's implemetation of SMP in Linux kernel all cores are supposed to run the same start-up code. But only core with ID 0 (master core) processes further while others are looping waiting for master core to complete some initialization. That means it's safe to un-pause slave cores and let them execute kernel - they will wait for master anyway. Signed-off-by: Alexey Brodkin Cc: Vineet Gupta diff --git a/arch/arc/lib/bootm.c b/arch/arc/lib/bootm.c index d185a50..04d9d9c 100644 --- a/arch/arc/lib/bootm.c +++ b/arch/arc/lib/bootm.c @@ -53,6 +53,9 @@ static void boot_prep_linux(bootm_headers_t *images) hang(); } +__weak void smp_set_core_boot_addr(unsigned long addr, int corenr) {} +__weak void smp_kick_all_cpus(void) {} + /* Subcommand: GO */ static void boot_jump_linux(bootm_headers_t *images, int flag) { @@ -80,6 +83,9 @@ static void boot_jump_linux(bootm_headers_t *images, int flag) r2 = (unsigned int)getenv("bootargs"); } + smp_set_core_boot_addr((unsigned long)kernel_entry, -1); + smp_kick_all_cpus(); + if (!fake) kernel_entry(r0, 0, r2); } diff --git a/board/synopsys/axs101/axs101.c b/board/synopsys/axs101/axs101.c index 8c16410..d4280f7 100644 --- a/board/synopsys/axs101/axs101.c +++ b/board/synopsys/axs101/axs101.c @@ -56,3 +56,33 @@ int board_early_init_f(void) return 0; } + +#ifdef CONFIG_ISA_ARCV2 +#define RESET_VECTOR_ADDR 0x0 + +void smp_set_core_boot_addr(unsigned long addr, int corenr) +{ + /* All cores have reset vector pointing to 0 */ + writel(addr, (void __iomem *)RESET_VECTOR_ADDR); + + /* Make sure other cores see written value in memory */ + flush_dcache_range(RESET_VECTOR_ADDR, RESET_VECTOR_ADDR + sizeof(int)); +} + +void smp_kick_all_cpus(void) +{ +/* CPU start CREG */ +#define AXC003_CREG_CPU_START 0xF0001400 + +/* Bits positions in CPU start CREG */ +#define BITS_START 0 +#define BITS_POLARITY 8 +#define BITS_CORE_SEL 9 +#define BITS_MULTICORE 12 + +#define CMD (1 << BITS_MULTICORE) | (1 << BITS_CORE_SEL) | \ + (1 << BITS_POLARITY) | (1 << BITS_START) + + writel(CMD, (void __iomem *)AXC003_CREG_CPU_START); +} +#endif -- cgit v0.10.2 From ef639e6f7076c19959f40f367cead5108d099592 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Mon, 18 May 2015 16:56:26 +0300 Subject: arc: significant cache rework [1] Align cache management functions to those in Linux kernel. I.e.: a) Use the same functions for all cache ops (D$ Inv/Flush) b) Split cache ops in 3 sub-functions: "before", "lineloop" and "after". That way we may re-use "before" and "after" functions for region and full cache ops. [2] Implement full-functional L2 (SLC) management. Before SLC was simply disabled early on boot. It's also possible to enable or disable L2 cache from config utility. [3] Disable/enable corresponding caches early on boot. So if U-Boot is configured to use caches they will be used at all times (this is useful in partucular for speed-up of relocation). Signed-off-by: Alexey Brodkin diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h index 0e11dcc..667f218 100644 --- a/arch/arc/include/asm/arcregs.h +++ b/arch/arc/include/asm/arcregs.h @@ -47,9 +47,12 @@ #endif #define ARC_BCR_DC_BUILD 0x72 #define ARC_BCR_SLC 0xce -#define ARC_AUX_SLC_CONTROL 0x903 +#define ARC_AUX_SLC_CONFIG 0x901 +#define ARC_AUX_SLC_CTRL 0x903 #define ARC_AUX_SLC_FLUSH 0x904 #define ARC_AUX_SLC_INVALIDATE 0x905 +#define ARC_AUX_SLC_IVDL 0x910 +#define ARC_AUX_SLC_FLDL 0x912 #ifndef __ASSEMBLY__ /* Accessors for auxiliary registers */ diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h index 0b3ebd9..432606a 100644 --- a/arch/arc/include/asm/cache.h +++ b/arch/arc/include/asm/cache.h @@ -29,12 +29,7 @@ #ifndef __ASSEMBLY__ -#ifdef CONFIG_ISA_ARCV2 -void slc_enable(void); -void slc_disable(void); -void slc_flush(void); -void slc_invalidate(void); -#endif +void cache_init(void); #endif /* __ASSEMBLY__ */ diff --git a/arch/arc/lib/cache.c b/arch/arc/lib/cache.c index e369e5a..ed8e8e7 100644 --- a/arch/arc/lib/cache.c +++ b/arch/arc/lib/cache.c @@ -5,9 +5,13 @@ */ #include +#include +#include #include #include +#define CACHE_LINE_MASK (~(CONFIG_SYS_CACHELINE_SIZE - 1)) + /* Bit values in IC_CTRL */ #define IC_CTRL_CACHE_DISABLE (1 << 0) @@ -18,60 +22,186 @@ #define CACHE_VER_NUM_MASK 0xF #define SLC_CTRL_SB (1 << 2) +#define OP_INV 0x1 +#define OP_FLUSH 0x2 +#define OP_INV_IC 0x3 + +#ifdef CONFIG_ISA_ARCV2 +/* + * By default that variable will fall into .bss section. + * But .bss section is not relocated and so it will be initilized before + * relocation but will be used after being zeroed. + */ +int slc_line_sz __section(".data"); +int slc_exists __section(".data"); + +static unsigned int __before_slc_op(const int op) +{ + unsigned int reg = reg; + + if (op == OP_INV) { + /* + * IM is set by default and implies Flush-n-inv + * Clear it here for vanilla inv + */ + reg = read_aux_reg(ARC_AUX_SLC_CTRL); + write_aux_reg(ARC_AUX_SLC_CTRL, reg & ~DC_CTRL_INV_MODE_FLUSH); + } + + return reg; +} + +static void __after_slc_op(const int op, unsigned int reg) +{ + if (op & OP_FLUSH) /* flush / flush-n-inv both wait */ + while (read_aux_reg(ARC_AUX_SLC_CTRL) & + DC_CTRL_FLUSH_STATUS) + ; + + /* Switch back to default Invalidate mode */ + if (op == OP_INV) + write_aux_reg(ARC_AUX_SLC_CTRL, reg | DC_CTRL_INV_MODE_FLUSH); +} + +static inline void __slc_line_loop(unsigned long paddr, unsigned long sz, + const int op) +{ + unsigned int aux_cmd; + int num_lines; + +#define SLC_LINE_MASK (~(slc_line_sz - 1)) + + aux_cmd = op & OP_INV ? ARC_AUX_SLC_IVDL : ARC_AUX_SLC_FLDL; + + sz += paddr & ~SLC_LINE_MASK; + paddr &= SLC_LINE_MASK; + + num_lines = DIV_ROUND_UP(sz, slc_line_sz); + + while (num_lines-- > 0) { + write_aux_reg(aux_cmd, paddr); + paddr += slc_line_sz; + } +} + +static inline void __slc_entire_op(const int cacheop) +{ + int aux; + unsigned int ctrl_reg = __before_slc_op(cacheop); + + if (cacheop & OP_INV) /* Inv or flush-n-inv use same cmd reg */ + aux = ARC_AUX_SLC_INVALIDATE; + else + aux = ARC_AUX_SLC_FLUSH; + + write_aux_reg(aux, 0x1); + + __after_slc_op(cacheop, ctrl_reg); +} + +static inline void __slc_line_op(unsigned long paddr, unsigned long sz, + const int cacheop) +{ + unsigned int ctrl_reg = __before_slc_op(cacheop); + __slc_line_loop(paddr, sz, cacheop); + __after_slc_op(cacheop, ctrl_reg); +} +#else +#define __slc_entire_op(cacheop) +#define __slc_line_op(paddr, sz, cacheop) +#endif + +static inline int icache_exists(void) +{ + /* Check if Instruction Cache is available */ + if (read_aux_reg(ARC_BCR_IC_BUILD) & CACHE_VER_NUM_MASK) + return 1; + else + return 0; +} + +static inline int dcache_exists(void) +{ + /* Check if Data Cache is available */ + if (read_aux_reg(ARC_BCR_DC_BUILD) & CACHE_VER_NUM_MASK) + return 1; + else + return 0; +} + +void cache_init(void) +{ +#ifdef CONFIG_ISA_ARCV2 + /* Check if System-Level Cache (SLC) is available */ + if (read_aux_reg(ARC_BCR_SLC) & CACHE_VER_NUM_MASK) { +#define LSIZE_OFFSET 4 +#define LSIZE_MASK 3 + if (read_aux_reg(ARC_AUX_SLC_CONFIG) & + (LSIZE_MASK << LSIZE_OFFSET)) + slc_line_sz = 64; + else + slc_line_sz = 128; + slc_exists = 1; + } else { + slc_exists = 0; + } +#endif +} + int icache_status(void) { - /* If no cache in CPU exit immediately */ - if (!(read_aux_reg(ARC_BCR_IC_BUILD) & CACHE_VER_NUM_MASK)) + if (!icache_exists()) return 0; - return (read_aux_reg(ARC_AUX_IC_CTRL) & IC_CTRL_CACHE_DISABLE) != - IC_CTRL_CACHE_DISABLE; + if (read_aux_reg(ARC_AUX_IC_CTRL) & IC_CTRL_CACHE_DISABLE) + return 0; + else + return 1; } void icache_enable(void) { - /* If no cache in CPU exit immediately */ - if (!(read_aux_reg(ARC_BCR_IC_BUILD) & CACHE_VER_NUM_MASK)) - return; - - write_aux_reg(ARC_AUX_IC_CTRL, read_aux_reg(ARC_AUX_IC_CTRL) & - ~IC_CTRL_CACHE_DISABLE); + if (icache_exists()) + write_aux_reg(ARC_AUX_IC_CTRL, read_aux_reg(ARC_AUX_IC_CTRL) & + ~IC_CTRL_CACHE_DISABLE); } void icache_disable(void) { - /* If no cache in CPU exit immediately */ - if (!(read_aux_reg(ARC_BCR_IC_BUILD) & CACHE_VER_NUM_MASK)) - return; - - write_aux_reg(ARC_AUX_IC_CTRL, read_aux_reg(ARC_AUX_IC_CTRL) | - IC_CTRL_CACHE_DISABLE); + if (icache_exists()) + write_aux_reg(ARC_AUX_IC_CTRL, read_aux_reg(ARC_AUX_IC_CTRL) | + IC_CTRL_CACHE_DISABLE); } +#ifndef CONFIG_SYS_DCACHE_OFF void invalidate_icache_all(void) { - /* If no cache in CPU exit immediately */ - if (!(read_aux_reg(ARC_BCR_IC_BUILD) & CACHE_VER_NUM_MASK)) - return; - /* Any write to IC_IVIC register triggers invalidation of entire I$ */ - write_aux_reg(ARC_AUX_IC_IVIC, 1); + if (icache_status()) { + write_aux_reg(ARC_AUX_IC_IVIC, 1); + read_aux_reg(ARC_AUX_IC_CTRL); /* blocks */ + } } +#else +void invalidate_icache_all(void) +{ +} +#endif int dcache_status(void) { - /* If no cache in CPU exit immediately */ - if (!(read_aux_reg(ARC_BCR_DC_BUILD) & CACHE_VER_NUM_MASK)) + if (!dcache_exists()) return 0; - return (read_aux_reg(ARC_AUX_DC_CTRL) & DC_CTRL_CACHE_DISABLE) != - DC_CTRL_CACHE_DISABLE; + if (read_aux_reg(ARC_AUX_DC_CTRL) & DC_CTRL_CACHE_DISABLE) + return 0; + else + return 1; } void dcache_enable(void) { - /* If no cache in CPU exit immediately */ - if (!(read_aux_reg(ARC_BCR_DC_BUILD) & CACHE_VER_NUM_MASK)) + if (!dcache_exists()) return; write_aux_reg(ARC_AUX_DC_CTRL, read_aux_reg(ARC_AUX_DC_CTRL) & @@ -80,139 +210,144 @@ void dcache_enable(void) void dcache_disable(void) { - /* If no cache in CPU exit immediately */ - if (!(read_aux_reg(ARC_BCR_DC_BUILD) & CACHE_VER_NUM_MASK)) + if (!dcache_exists()) return; write_aux_reg(ARC_AUX_DC_CTRL, read_aux_reg(ARC_AUX_DC_CTRL) | DC_CTRL_CACHE_DISABLE); } -void flush_dcache_all(void) -{ - /* If no cache in CPU exit immediately */ - if (!(read_aux_reg(ARC_BCR_DC_BUILD) & CACHE_VER_NUM_MASK)) - return; - - /* Do flush of entire cache */ - write_aux_reg(ARC_AUX_DC_FLSH, 1); - - /* Wait flush end */ - while (read_aux_reg(ARC_AUX_DC_CTRL) & DC_CTRL_FLUSH_STATUS) - ; -} - #ifndef CONFIG_SYS_DCACHE_OFF -static void dcache_flush_line(unsigned addr) +/* + * Common Helper for Line Operations on {I,D}-Cache + */ +static inline void __cache_line_loop(unsigned long paddr, unsigned long sz, + const int cacheop) { + unsigned int aux_cmd; #if (CONFIG_ARC_MMU_VER == 3) - write_aux_reg(ARC_AUX_DC_PTAG, addr); + unsigned int aux_tag; #endif - write_aux_reg(ARC_AUX_DC_FLDL, addr); + int num_lines; - /* Wait flush end */ - while (read_aux_reg(ARC_AUX_DC_CTRL) & DC_CTRL_FLUSH_STATUS) - ; - -#ifndef CONFIG_SYS_ICACHE_OFF - /* - * Invalidate I$ for addresses range just flushed from D$. - * If we try to execute data flushed above it will be valid/correct - */ + if (cacheop == OP_INV_IC) { + aux_cmd = ARC_AUX_IC_IVIL; #if (CONFIG_ARC_MMU_VER == 3) - write_aux_reg(ARC_AUX_IC_PTAG, addr); + aux_tag = ARC_AUX_IC_PTAG; #endif - write_aux_reg(ARC_AUX_IC_IVIL, addr); -#endif /* CONFIG_SYS_ICACHE_OFF */ -} -#endif /* CONFIG_SYS_DCACHE_OFF */ - -void flush_dcache_range(unsigned long start, unsigned long end) -{ -#ifndef CONFIG_SYS_DCACHE_OFF - unsigned int addr; + } else { + /* d$ cmd: INV (discard or wback-n-discard) OR FLUSH (wback) */ + aux_cmd = cacheop & OP_INV ? ARC_AUX_DC_IVDL : ARC_AUX_DC_FLDL; +#if (CONFIG_ARC_MMU_VER == 3) + aux_tag = ARC_AUX_DC_PTAG; +#endif + } - start = start & (~(CONFIG_SYS_CACHELINE_SIZE - 1)); - end = end & (~(CONFIG_SYS_CACHELINE_SIZE - 1)); + sz += paddr & ~CACHE_LINE_MASK; + paddr &= CACHE_LINE_MASK; - for (addr = start; addr <= end; addr += CONFIG_SYS_CACHELINE_SIZE) - dcache_flush_line(addr); -#endif /* CONFIG_SYS_DCACHE_OFF */ -} + num_lines = DIV_ROUND_UP(sz, CONFIG_SYS_CACHELINE_SIZE); -void invalidate_dcache_range(unsigned long start, unsigned long end) -{ -#ifndef CONFIG_SYS_DCACHE_OFF - unsigned int addr; - - start = start & (~(CONFIG_SYS_CACHELINE_SIZE - 1)); - end = end & (~(CONFIG_SYS_CACHELINE_SIZE - 1)); - - for (addr = start; addr <= end; addr += CONFIG_SYS_CACHELINE_SIZE) { + while (num_lines-- > 0) { #if (CONFIG_ARC_MMU_VER == 3) - write_aux_reg(ARC_AUX_DC_PTAG, addr); + write_aux_reg(aux_tag, paddr); #endif - write_aux_reg(ARC_AUX_DC_IVDL, addr); + write_aux_reg(aux_cmd, paddr); + paddr += CONFIG_SYS_CACHELINE_SIZE; } -#endif /* CONFIG_SYS_DCACHE_OFF */ } -void invalidate_dcache_all(void) +static unsigned int __before_dc_op(const int op) { - /* If no cache in CPU exit immediately */ - if (!(read_aux_reg(ARC_BCR_DC_BUILD) & CACHE_VER_NUM_MASK)) - return; + unsigned int reg; + + if (op == OP_INV) { + /* + * IM is set by default and implies Flush-n-inv + * Clear it here for vanilla inv + */ + reg = read_aux_reg(ARC_AUX_DC_CTRL); + write_aux_reg(ARC_AUX_DC_CTRL, reg & ~DC_CTRL_INV_MODE_FLUSH); + } - /* Write 1 to DC_IVDC register triggers invalidation of entire D$ */ - write_aux_reg(ARC_AUX_DC_IVDC, 1); + return reg; } -void flush_cache(unsigned long start, unsigned long size) +static void __after_dc_op(const int op, unsigned int reg) { - flush_dcache_range(start, start + size); + if (op & OP_FLUSH) /* flush / flush-n-inv both wait */ + while (read_aux_reg(ARC_AUX_DC_CTRL) & DC_CTRL_FLUSH_STATUS) + ; + + /* Switch back to default Invalidate mode */ + if (op == OP_INV) + write_aux_reg(ARC_AUX_DC_CTRL, reg | DC_CTRL_INV_MODE_FLUSH); } -#ifdef CONFIG_ISA_ARCV2 -void slc_enable(void) +static inline void __dc_entire_op(const int cacheop) { - /* If SLC ver = 0, no SLC present in CPU */ - if (!(read_aux_reg(ARC_BCR_SLC) & 0xff)) - return; + int aux; + unsigned int ctrl_reg = __before_dc_op(cacheop); - write_aux_reg(ARC_AUX_SLC_CONTROL, - read_aux_reg(ARC_AUX_SLC_CONTROL) & ~1); -} + if (cacheop & OP_INV) /* Inv or flush-n-inv use same cmd reg */ + aux = ARC_AUX_DC_IVDC; + else + aux = ARC_AUX_DC_FLSH; -void slc_disable(void) -{ - /* If SLC ver = 0, no SLC present in CPU */ - if (!(read_aux_reg(ARC_BCR_SLC) & 0xff)) - return; + write_aux_reg(aux, 0x1); - write_aux_reg(ARC_AUX_SLC_CONTROL, - read_aux_reg(ARC_AUX_SLC_CONTROL) | 1); + __after_dc_op(cacheop, ctrl_reg); } -void slc_flush(void) +static inline void __dc_line_op(unsigned long paddr, unsigned long sz, + const int cacheop) { - /* If SLC ver = 0, no SLC present in CPU */ - if (!(read_aux_reg(ARC_BCR_SLC) & 0xff)) - return; + unsigned int ctrl_reg = __before_dc_op(cacheop); + __cache_line_loop(paddr, sz, cacheop); + __after_dc_op(cacheop, ctrl_reg); +} +#else +#define __dc_entire_op(cacheop) +#define __dc_line_op(paddr, sz, cacheop) +#endif /* !CONFIG_SYS_DCACHE_OFF */ - write_aux_reg(ARC_AUX_SLC_FLUSH, 1); +void invalidate_dcache_range(unsigned long start, unsigned long end) +{ + __dc_line_op(start, end - start, OP_INV); +#ifdef CONFIG_ISA_ARCV2 + if (slc_exists) + __slc_line_op(start, end - start, OP_INV); +#endif +} - /* Wait flush end */ - while (read_aux_reg(ARC_AUX_SLC_CONTROL) & SLC_CTRL_SB) - ; +void flush_dcache_range(unsigned long start, unsigned long end) +{ + __dc_line_op(start, end - start, OP_FLUSH); +#ifdef CONFIG_ISA_ARCV2 + if (slc_exists) + __slc_line_op(start, end - start, OP_FLUSH); +#endif } -void slc_invalidate(void) +void flush_cache(unsigned long start, unsigned long size) { - /* If SLC ver = 0, no SLC present in CPU */ - if (!(read_aux_reg(ARC_BCR_SLC) & 0xff)) - return; + flush_dcache_range(start, start + size); +} - write_aux_reg(ARC_AUX_SLC_INVALIDATE, 1); +void invalidate_dcache_all(void) +{ + __dc_entire_op(OP_INV); +#ifdef CONFIG_ISA_ARCV2 + if (slc_exists) + __slc_entire_op(OP_INV); +#endif } -#endif /* CONFIG_ISA_ARCV2 */ +void flush_dcache_all(void) +{ + __dc_entire_op(OP_FLUSH); +#ifdef CONFIG_ISA_ARCV2 + if (slc_exists) + __slc_entire_op(OP_FLUSH); +#endif +} diff --git a/arch/arc/lib/cpu.c b/arch/arc/lib/cpu.c index 3c930bc..4e4dd74 100644 --- a/arch/arc/lib/cpu.c +++ b/arch/arc/lib/cpu.c @@ -23,6 +23,8 @@ int arch_cpu_init(void) gd->cpu_clk = CONFIG_SYS_CLK_FREQ; gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + cache_init(); + return 0; } diff --git a/arch/arc/lib/init_helpers.c b/arch/arc/lib/init_helpers.c index 25690ee..dbc8d68 100644 --- a/arch/arc/lib/init_helpers.c +++ b/arch/arc/lib/init_helpers.c @@ -10,16 +10,8 @@ DECLARE_GLOBAL_DATA_PTR; int init_cache_f_r(void) { -#ifndef CONFIG_SYS_ICACHE_OFF - icache_enable(); - /* Make sure no stale entries persist from before we disabled cache */ - invalidate_icache_all(); -#endif - #ifndef CONFIG_SYS_DCACHE_OFF - dcache_enable(); - /* Make sure no stale entries persist from before we disabled cache */ - invalidate_dcache_all(); + flush_dcache_all(); #endif return 0; } diff --git a/arch/arc/lib/start.S b/arch/arc/lib/start.S index e1ef19c..26a5934 100644 --- a/arch/arc/lib/start.S +++ b/arch/arc/lib/start.S @@ -13,18 +13,46 @@ ENTRY(_start) /* Setup interrupt vector base that matches "__text_start" */ sr __ivt_start, [ARC_AUX_INTR_VEC_BASE] - /* Setup stack- and frame-pointers */ - mov %sp, CONFIG_SYS_INIT_SP_ADDR - mov %fp, %sp + ; Disable/enable I-cache according to configuration + lr r5, [ARC_BCR_IC_BUILD] + breq r5, 0, 1f ; I$ doesn't exist + lr r5, [ARC_AUX_IC_CTRL] +#ifndef CONFIG_SYS_ICACHE_OFF + bclr r5, r5, 0 ; 0 - Enable, 1 is Disable +#else + bset r5, r5, 0 ; I$ exists, but is not used +#endif + sr r5, [ARC_AUX_IC_CTRL] + +1: + ; Disable/enable D-cache according to configuration + lr r5, [ARC_BCR_DC_BUILD] + breq r5, 0, 1f ; D$ doesn't exist + lr r5, [ARC_AUX_DC_CTRL] + bclr r5, r5, 6 ; Invalidate (discard w/o wback) +#ifndef CONFIG_SYS_DCACHE_OFF + bclr r5, r5, 0 ; Enable (+Inv) +#else + bset r5, r5, 0 ; Disable (+Inv) +#endif + sr r5, [ARC_AUX_DC_CTRL] - /* Unconditionally disable caches */ +1: #ifdef CONFIG_ISA_ARCV2 - bl slc_flush - bl slc_disable + ; Disable System-Level Cache (SLC) + lr r5, [ARC_BCR_SLC] + breq r5, 0, 1f ; SLC doesn't exist + lr r5, [ARC_AUX_SLC_CTRL] + bclr r5, r5, 6 ; Invalidate (discard w/o wback) + bclr r5, r5, 0 ; Enable (+Inv) + sr r5, [ARC_AUX_SLC_CTRL] + +1: #endif - bl flush_dcache_all - bl dcache_disable - bl icache_disable + + /* Setup stack- and frame-pointers */ + mov %sp, CONFIG_SYS_INIT_SP_ADDR + mov %fp, %sp /* Allocate and zero GD, update SP */ mov %r0, %sp -- cgit v0.10.2 From af6da69f47314e0e8efa3711ffadbfda8d2334aa Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Wed, 1 Jul 2015 16:47:42 +0300 Subject: board: axs103 - add maintainer information Looks like I forgot to add myself as a maintainer for AXS103 defconfig. Fixing this now. Signed-off-by: Alexey Brodkin Cc: Tom Rini diff --git a/board/synopsys/axs101/MAINTAINERS b/board/synopsys/axs101/MAINTAINERS index 481bbcc..79fff8e 100644 --- a/board/synopsys/axs101/MAINTAINERS +++ b/board/synopsys/axs101/MAINTAINERS @@ -4,3 +4,4 @@ S: Maintained F: board/synopsys/axs101/ F: include/configs/axs101.h F: configs/axs101_defconfig +F: configs/axs103_defconfig -- cgit v0.10.2 From 4ad479e3d6ff1d1c5ca6c0ad6bacdc11f6947a01 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 00:51:23 +0530 Subject: spi: Zap andes_spi driver Zap andes_spi driver since the boards used this driver is no longer been active. Signed-off-by: Jagan Teki Cc: Macpaul Lin diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index e288692..93065b7 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -17,7 +17,6 @@ endif obj-$(CONFIG_EP93XX_SPI) += ep93xx_spi.o obj-$(CONFIG_ALTERA_SPI) += altera_spi.o -obj-$(CONFIG_ANDES_SPI) += andes_spi.o obj-$(CONFIG_ARMADA100_SPI) += armada100_spi.o obj-$(CONFIG_ATMEL_DATAFLASH_SPI) += atmel_dataflash_spi.o obj-$(CONFIG_ATMEL_SPI) += atmel_spi.o diff --git a/drivers/spi/andes_spi.c b/drivers/spi/andes_spi.c deleted file mode 100644 index 82aed75..0000000 --- a/drivers/spi/andes_spi.c +++ /dev/null @@ -1,284 +0,0 @@ -/* - * Driver of Andes SPI Controller - * - * (C) Copyright 2011 Andes Technology - * Macpaul Lin - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -#include -#include "andes_spi.h" - -void spi_init(void) -{ - /* do nothing */ -} - -static void andes_spi_spit_en(struct andes_spi_slave *ds) -{ - unsigned int dcr = readl(&ds->regs->dcr); - - debug("%s: dcr: %x, write value: %x\n", - __func__, dcr, (dcr | ANDES_SPI_DCR_SPIT)); - - writel((dcr | ANDES_SPI_DCR_SPIT), &ds->regs->dcr); -} - -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode) -{ - struct andes_spi_slave *ds; - - if (!spi_cs_is_valid(bus, cs)) - return NULL; - - ds = spi_alloc_slave(struct andes_spi_slave, bus, cs); - if (!ds) - return NULL; - - ds->regs = (struct andes_spi_regs *)CONFIG_SYS_SPI_BASE; - - /* - * The hardware of andes_spi will set its frequency according - * to APB/AHB bus clock. Hence the hardware doesn't allow changing of - * requency and so the user requested speed is always ignored. - */ - ds->freq = max_hz; - - return &ds->slave; -} - -void spi_free_slave(struct spi_slave *slave) -{ - struct andes_spi_slave *ds = to_andes_spi(slave); - - free(ds); -} - -int spi_claim_bus(struct spi_slave *slave) -{ - struct andes_spi_slave *ds = to_andes_spi(slave); - unsigned int apb; - unsigned int baud; - - /* Enable the SPI hardware */ - writel(ANDES_SPI_CR_SPIRST, &ds->regs->cr); - udelay(1000); - - /* setup format */ - baud = ((CONFIG_SYS_CLK_FREQ / CONFIG_SYS_SPI_CLK / 2) - 1) & 0xFF; - - /* - * SPI_CLK = AHB bus clock / ((BAUD + 1)*2) - * BAUD = AHB bus clock / SPI_CLK / 2) - 1 - */ - apb = (readl(&ds->regs->apb) & 0xffffff00) | baud; - writel(apb, &ds->regs->apb); - - /* no interrupts */ - writel(0, &ds->regs->ie); - - return 0; -} - -void spi_release_bus(struct spi_slave *slave) -{ - struct andes_spi_slave *ds = to_andes_spi(slave); - - /* Disable the SPI hardware */ - writel(ANDES_SPI_CR_SPIRST, &ds->regs->cr); -} - -static int andes_spi_read(struct spi_slave *slave, unsigned int len, - u8 *rxp, unsigned long flags) -{ - struct andes_spi_slave *ds = to_andes_spi(slave); - unsigned int i, left; - unsigned int data; - - debug("%s: slave: %x, len: %d, rxp: %x, flags: %d\n", - __func__, slave, len, rxp, flags); - - debug("%s: data: ", __func__); - while (len > 0) { - left = min(len, 4); - data = readl(&ds->regs->data); - - debug(" "); - for (i = 0; i < left; i++) { - debug("%02x ", data & 0xff); - *rxp++ = data; - data >>= 8; - len--; - } - } - debug("\n"); - - return 0; -} - -static int andes_spi_write(struct spi_slave *slave, unsigned int wlen, - unsigned int rlen, const u8 *txp, unsigned long flags) -{ - struct andes_spi_slave *ds = to_andes_spi(slave); - unsigned int data; - unsigned int i, left; - unsigned int spit_enabled = 0; - - debug("%s: slave: %x, wlen: %d, rlen: %d, txp: %x, flags: %x\n", - __func__, slave, wlen, rlen, txp, flags); - - /* The value of wlen and rlen wrote to register must minus 1 */ - if (rlen == 0) /* write only */ - writel(ANDES_SPI_DCR_MODE_WO | ANDES_SPI_DCR_WCNT(wlen-1) | - ANDES_SPI_DCR_RCNT(0), &ds->regs->dcr); - else /* write then read */ - writel(ANDES_SPI_DCR_MODE_WR | ANDES_SPI_DCR_WCNT(wlen-1) | - ANDES_SPI_DCR_RCNT(rlen-1), &ds->regs->dcr); - - /* wait till SPIBSY is cleared */ - while (readl(&ds->regs->st) & ANDES_SPI_ST_SPIBSY) - ; - - /* data write process */ - debug("%s: txp: ", __func__); - while (wlen > 0) { - /* clear the data */ - data = 0; - - /* data are usually be read 32bits once a time */ - left = min(wlen, 4); - - for (i = 0; i < left; i++) { - debug("%x ", *txp); - data |= *txp++ << (i * 8); - wlen--; - } - debug("\n"); - - debug("data: %08x\n", data); - debug("streg before write: %08x\n", readl(&ds->regs->st)); - /* wait till TXFULL is deasserted */ - while (readl(&ds->regs->st) & ANDES_SPI_ST_TXFEL) - ; - writel(data, &ds->regs->data); - debug("streg after write: %08x\n", readl(&ds->regs->st)); - - - if (spit_enabled == 0) { - /* enable SPIT bit - trigger the tx and rx progress */ - andes_spi_spit_en(ds); - spit_enabled = 1; - } - - } - debug("\n"); - - return 0; -} - -/* - * spi_xfer: - * Since andes_spi doesn't support independent command transaction, - * that is, write and than read must be operated in continuous - * execution, there is no need to set dcr and trigger spit again in - * RX process. - */ -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, - const void *dout, void *din, unsigned long flags) -{ - unsigned int len; - static int op_nextime; - static u8 tmp_cmd[5]; - static int tmp_wlen; - unsigned int i; - - if (bitlen == 0) - /* Finish any previously submitted transfers */ - goto out; - - if (bitlen % 8) { - /* Errors always terminate an ongoing transfer */ - flags |= SPI_XFER_END; - goto out; - } - - len = bitlen / 8; - - debug("%s: slave: %08x, bitlen: %d, dout: " - "%08x, din: %08x, flags: %d, len: %d\n", - __func__, slave, bitlen, dout, din, flags, len); - - /* - * Important: - * andes_spi's hardware doesn't support 2 data channel. The read - * and write cmd/data share the same register (data register). - * - * If a command has write and read transaction, you cannot do write - * this time and then do read on next time. - * - * A command writes first with a read response must indicating - * the read length in write operation. Hence the write action must - * be stored temporary and wait until the next read action has been - * arrived. Then we flush the write and read action out together. - */ - if (!dout) { - if (op_nextime == 1) { - /* flags should be SPI_XFER_END, value is 2 */ - op_nextime = 0; - andes_spi_write(slave, tmp_wlen, len, tmp_cmd, flags); - } - return andes_spi_read(slave, len, din, flags); - } else if (!din) { - if (flags == SPI_XFER_BEGIN) { - /* store the write command and do operation next time */ - op_nextime = 1; - memset(tmp_cmd, 0, sizeof(tmp_cmd)); - memcpy(tmp_cmd, dout, len); - - debug("%s: tmp_cmd: ", __func__); - for (i = 0; i < len; i++) - debug("%x ", *(tmp_cmd + i)); - debug("\n"); - - tmp_wlen = len; - } else { - /* - * flags should be (SPI_XFER_BEGIN | SPI_XFER_END), - * the value is 3. - */ - if (op_nextime == 1) { - /* flags should be SPI_XFER_END, value is 2 */ - op_nextime = 0; - /* flags 3 implies write only */ - andes_spi_write(slave, tmp_wlen, 0, tmp_cmd, 3); - } - - debug("flags: %x\n", flags); - return andes_spi_write(slave, len, 0, dout, flags); - } - } - -out: - return 0; -} - -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - return bus == 0 && cs == 0; -} - -void spi_cs_activate(struct spi_slave *slave) -{ - /* do nothing */ -} - -void spi_cs_deactivate(struct spi_slave *slave) -{ - /* do nothing */ -} diff --git a/drivers/spi/andes_spi.h b/drivers/spi/andes_spi.h deleted file mode 100644 index b7d2945..0000000 --- a/drivers/spi/andes_spi.h +++ /dev/null @@ -1,115 +0,0 @@ -/* - * Register definitions for the Andes SPI Controller - * - * (C) Copyright 2011 Andes Technology - * Macpaul Lin - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __ANDES_SPI_H -#define __ANDES_SPI_H - -struct andes_spi_regs { - unsigned int apb; /* 0x00 - APB SPI interface setting */ - unsigned int pio; /* 0x04 - PIO reg */ - unsigned int cr; /* 0x08 - SPI Control reg */ - unsigned int st; /* 0x0c - SPI Status reg */ - unsigned int ie; /* 0x10 - Interrupt Enable reg */ - unsigned int ist; /* 0x14 - Interrupt Status reg */ - unsigned int dcr; /* 0x18 - data control reg */ - unsigned int data; /* 0x1c - data register */ - unsigned int ahb; /* 0x20 - AHB SPI interface setting */ - unsigned int ver; /* 0x3c - SPI version reg */ -}; - -#define BIT(x) (1 << (x)) - -/* 0x00 - APB SPI interface setting register */ -#define ANDES_SPI_APB_BAUD(x) (((x) & 0xff) < 0) -#define ANDES_SPI_APB_CSHT(x) (((x) & 0xf) < 16) -#define ANDES_SPI_APB_SPNTS BIT(20) /* 0: normal, 1: delay */ -#define ANDES_SPI_APB_CPHA BIT(24) /* 0: Sampling at odd edges */ -#define ANDES_SPI_APB_CPOL BIT(25) /* 0: SCK low, 1: SCK high */ -#define ANDES_SPI_APB_MSSL BIT(26) /* 0: SPI Master, 1: slave */ - -/* 0x04 - PIO register */ -#define ANDES_SPI_PIO_MISO BIT(0) /* input value of pin MISO */ -#define ANDES_SPI_PIO_MOSI BIT(1) /* I/O value of pin MOSI */ -#define ANDES_SPI_PIO_SCK BIT(2) /* I/O value of pin SCK */ -#define ANDES_SPI_PIO_CS BIT(3) /* I/O value of pin CS */ -#define ANDES_SPI_PIO_PIOE BIT(4) /* Programming IO Enable */ - -/* 0x08 - SPI Control register */ -#define ANDES_SPI_CR_SPIRST BIT(0) /* SPI mode reset */ -#define ANDES_SPI_CR_RXFRST BIT(1) /* RxFIFO reset */ -#define ANDES_SPI_CR_TXFRST BIT(2) /* TxFIFO reset */ -#define ANDES_SPI_CR_RXFTH(x) (((x) & 0x1f) << 10) /* RxFIFO Threshold */ -#define ANDES_SPI_CR_TXFTH(x) (((x) & 0x1f) << 18) /* TxFIFO Threshold */ - -/* 0x0c - SPI Status register */ -#define ANDES_SPI_ST_SPIBSY BIT(0) /* SPI Transfer is active */ -#define ANDES_SPI_ST_RXFEM BIT(8) /* RxFIFO Empty Flag */ -#define ANDES_SPI_ST_RXFEL BIT(9) /* RxFIFO Full Flag */ -#define ANDES_SPI_ST_RXFVE(x) (((x) >> 10) & 0x1f) -#define ANDES_SPI_ST_TXFEM BIT(16) /* TxFIFO Empty Flag */ -#define ANDES_SPI_ST_TXFEL BIT(7) /* TxFIFO Full Flag */ -#define ANDES_SPI_ST_TXFVE(x) (((x) >> 18) & 0x1f) - -/* 0x10 - Interrupt Enable register */ -#define ANDES_SPI_IE_RXFORIE BIT(0) /* RxFIFO overrun intr */ -#define ANDES_SPI_IE_TXFURIE BIT(1) /* TxFOFO underrun intr */ -#define ANDES_SPI_IE_RXFTHIE BIT(2) /* RxFIFO threshold intr */ -#define ANDES_SPI_IE_TXFTHIE BIT(3) /* TxFIFO threshold intr */ -#define ANDES_SPI_IE_SPIEIE BIT(4) /* SPI transmit END intr */ -#define ANDES_SPI_IE_SPCFIE BIT(5) /* AHB/APB TxReq conflict */ - -/* 0x14 - Interrupt Status Register */ -#define ANDES_SPI_IST_RXFORI BIT(0) /* has RxFIFO overrun */ -#define ANDES_SPI_IST_TXFURI BIT(1) /* has TxFOFO underrun */ -#define ANDES_SPI_IST_RXFTHI BIT(2) /* has RxFIFO threshold */ -#define ANDES_SPI_IST_TXFTHI BIT(3) /* has TxFIFO threshold */ -#define ANDES_SPI_IST_SPIEI BIT(4) /* has SPI transmit END */ -#define ANDES_SPI_IST_SPCFI BIT(5) /* has AHB/APB TxReq conflict */ - -/* 0x18 - Data Control Register */ -#define ANDES_SPI_DCR_RCNT(x) (((x) & 0x3ff) << 0) -#define ANDES_SPI_DCR_DYCNT(x) (((x) & 0x7) << 12) -#define ANDES_SPI_DCR_WCNT(x) (((x) & 0x3ff) << 16) -#define ANDES_SPI_DCR_TRAMODE(x) (((x) & 0x7) << 28) -#define ANDES_SPI_DCR_SPIT BIT(31) /* SPI bus trigger */ - -#define ANDES_SPI_DCR_MODE_WRCON ANDES_SPI_DCR_TRAMODE(0) /* w/r at the same time */ -#define ANDES_SPI_DCR_MODE_WO ANDES_SPI_DCR_TRAMODE(1) /* write only */ -#define ANDES_SPI_DCR_MODE_RO ANDES_SPI_DCR_TRAMODE(2) /* read only */ -#define ANDES_SPI_DCR_MODE_WR ANDES_SPI_DCR_TRAMODE(3) /* write, read */ -#define ANDES_SPI_DCR_MODE_RW ANDES_SPI_DCR_TRAMODE(4) /* read, write */ -#define ANDES_SPI_DCR_MODE_WDR ANDES_SPI_DCR_TRAMODE(5) /* write, dummy, read */ -#define ANDES_SPI_DCR_MODE_RDW ANDES_SPI_DCR_TRAMODE(6) /* read, dummy, write */ -#define ANDES_SPI_DCR_MODE_RECEIVE ANDES_SPI_DCR_TRAMODE(7) /* receive */ - -/* 0x20 - AHB SPI interface setting register */ -#define ANDES_SPI_AHB_BAUD(x) (((x) & 0xff) < 0) -#define ANDES_SPI_AHB_CSHT(x) (((x) & 0xf) < 16) -#define ANDES_SPI_AHB_SPNTS BIT(20) /* 0: normal, 1: delay */ -#define ANDES_SPI_AHB_CPHA BIT(24) /* 0: Sampling at odd edges */ -#define ANDES_SPI_AHB_CPOL BIT(25) /* 0: SCK low, 1: SCK high */ -#define ANDES_SPI_AHB_MSSL BIT(26) /* only Master mode */ - -/* 0x3c - Version Register - (Year V.MAJOR.MINOR) */ -#define ANDES_SPI_VER_MINOR(x) (((x) >> 0) & 0xf) -#define ANDES_SPI_VER_MAJOR(x) (((x) >> 8) & 0xf) -#define ANDES_SPI_VER_YEAR(x) (((x) >> 16) & 0xf) - -struct andes_spi_slave { - struct spi_slave slave; - struct andes_spi_regs *regs; - unsigned int freq; -}; - -static inline struct andes_spi_slave *to_andes_spi(struct spi_slave *slave) -{ - return container_of(slave, struct andes_spi_slave, slave); -} - -#endif /* __ANDES_SPI_H */ -- cgit v0.10.2 From 4d934a9ffd64a0dec81ef13e1ca6b78a5fb3eb33 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 00:51:24 +0530 Subject: spi: Zap ftssp010_spi driver Zap ftssp010_spi driver since the boards used this driver is no longer been active. Signed-off-by: Jagan Teki Cc: Kuo-Jung Su Cc: Axel Lin diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 93065b7..1e3611d 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -28,7 +28,6 @@ obj-$(CONFIG_CF_QSPI) += cf_qspi.o obj-$(CONFIG_DAVINCI_SPI) += davinci_spi.o obj-$(CONFIG_DESIGNWARE_SPI) += designware_spi.o obj-$(CONFIG_EXYNOS_SPI) += exynos_spi.o -obj-$(CONFIG_FTSSP010_SPI) += ftssp010_spi.o obj-$(CONFIG_ICH_SPI) += ich.o obj-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o obj-$(CONFIG_LPC32XX_SSP) += lpc32xx_ssp.o diff --git a/drivers/spi/ftssp010_spi.c b/drivers/spi/ftssp010_spi.c deleted file mode 100644 index c7d6480..0000000 --- a/drivers/spi/ftssp010_spi.c +++ /dev/null @@ -1,498 +0,0 @@ -/* - * (C) Copyright 2013 - * Faraday Technology Corporation. - * Kuo-Jung Su - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include - -#ifndef CONFIG_FTSSP010_BASE_LIST -#define CONFIG_FTSSP010_BASE_LIST { CONFIG_FTSSP010_BASE } -#endif - -#ifndef CONFIG_FTSSP010_GPIO_BASE -#define CONFIG_FTSSP010_GPIO_BASE 0 -#endif - -#ifndef CONFIG_FTSSP010_GPIO_LIST -#define CONFIG_FTSSP010_GPIO_LIST { CONFIG_FTSSP010_GPIO_BASE } -#endif - -#ifndef CONFIG_FTSSP010_CLOCK -#define CONFIG_FTSSP010_CLOCK clk_get_rate("SSP"); -#endif - -#ifndef CONFIG_FTSSP010_TIMEOUT -#define CONFIG_FTSSP010_TIMEOUT 100 -#endif - -/* FTSSP010 chip registers */ -struct ftssp010_regs { - uint32_t cr[3];/* control register */ - uint32_t sr; /* status register */ - uint32_t icr; /* interrupt control register */ - uint32_t isr; /* interrupt status register */ - uint32_t dr; /* data register */ - uint32_t rsvd[17]; - uint32_t revr; /* revision register */ - uint32_t fear; /* feature register */ -}; - -/* Control Register 0 */ -#define CR0_FFMT_MASK (7 << 12) -#define CR0_FFMT_SSP (0 << 12) -#define CR0_FFMT_SPI (1 << 12) -#define CR0_FFMT_MICROWIRE (2 << 12) -#define CR0_FFMT_I2S (3 << 12) -#define CR0_FFMT_AC97 (4 << 12) -#define CR0_FLASH (1 << 11) -#define CR0_FSDIST(x) (((x) & 0x03) << 8) -#define CR0_LOOP (1 << 7) /* loopback mode */ -#define CR0_LSB (1 << 6) /* LSB */ -#define CR0_FSPO (1 << 5) /* fs atcive low (I2S only) */ -#define CR0_FSJUSTIFY (1 << 4) -#define CR0_OPM_SLAVE (0 << 2) -#define CR0_OPM_MASTER (3 << 2) -#define CR0_OPM_I2S_MSST (3 << 2) /* master stereo mode */ -#define CR0_OPM_I2S_MSMO (2 << 2) /* master mono mode */ -#define CR0_OPM_I2S_SLST (1 << 2) /* slave stereo mode */ -#define CR0_OPM_I2S_SLMO (0 << 2) /* slave mono mode */ -#define CR0_SCLKPO (1 << 1) /* clock polarity */ -#define CR0_SCLKPH (1 << 0) /* clock phase */ - -/* Control Register 1 */ -#define CR1_PDL(x) (((x) & 0xff) << 24) /* padding length */ -#define CR1_SDL(x) ((((x) - 1) & 0x1f) << 16) /* data length */ -#define CR1_DIV(x) (((x) - 1) & 0xffff) /* clock divider */ - -/* Control Register 2 */ -#define CR2_CS(x) (((x) & 3) << 10) /* CS/FS select */ -#define CR2_FS (1 << 9) /* CS/FS signal level */ -#define CR2_TXEN (1 << 8) /* tx enable */ -#define CR2_RXEN (1 << 7) /* rx enable */ -#define CR2_RESET (1 << 6) /* chip reset */ -#define CR2_TXFC (1 << 3) /* tx fifo Clear */ -#define CR2_RXFC (1 << 2) /* rx fifo Clear */ -#define CR2_TXDOE (1 << 1) /* tx data output enable */ -#define CR2_EN (1 << 0) /* chip enable */ - -/* Status Register */ -#define SR_RFF (1 << 0) /* rx fifo full */ -#define SR_TFNF (1 << 1) /* tx fifo not full */ -#define SR_BUSY (1 << 2) /* chip busy */ -#define SR_RFVE(reg) (((reg) >> 4) & 0x1f) /* rx fifo valid entries */ -#define SR_TFVE(reg) (((reg) >> 12) & 0x1f) /* tx fifo valid entries */ - -/* Feature Register */ -#define FEAR_BITS(reg) ((((reg) >> 0) & 0xff) + 1) /* data width */ -#define FEAR_RFSZ(reg) ((((reg) >> 8) & 0xff) + 1) /* rx fifo size */ -#define FEAR_TFSZ(reg) ((((reg) >> 16) & 0xff) + 1) /* tx fifo size */ -#define FEAR_AC97 (1 << 24) -#define FEAR_I2S (1 << 25) -#define FEAR_SPI_MWR (1 << 26) -#define FEAR_SSP (1 << 27) -#define FEAR_SPDIF (1 << 28) - -/* FTGPIO010 chip registers */ -struct ftgpio010_regs { - uint32_t out; /* 0x00: Data Output */ - uint32_t in; /* 0x04: Data Input */ - uint32_t dir; /* 0x08: Direction */ - uint32_t bypass; /* 0x0c: Bypass */ - uint32_t set; /* 0x10: Data Set */ - uint32_t clr; /* 0x14: Data Clear */ - uint32_t pull_up; /* 0x18: Pull-Up Enabled */ - uint32_t pull_st; /* 0x1c: Pull State (0=pull-down, 1=pull-up) */ -}; - -struct ftssp010_gpio { - struct ftgpio010_regs *regs; - uint32_t pin; -}; - -struct ftssp010_spi { - struct spi_slave slave; - struct ftssp010_gpio gpio; - struct ftssp010_regs *regs; - uint32_t fifo; - uint32_t mode; - uint32_t div; - uint32_t clk; - uint32_t speed; - uint32_t revision; -}; - -static inline struct ftssp010_spi *to_ftssp010_spi(struct spi_slave *slave) -{ - return container_of(slave, struct ftssp010_spi, slave); -} - -static int get_spi_chip(int bus, struct ftssp010_spi *chip) -{ - uint32_t fear, base[] = CONFIG_FTSSP010_BASE_LIST; - - if (bus >= ARRAY_SIZE(base) || !base[bus]) - return -1; - - chip->regs = (struct ftssp010_regs *)base[bus]; - - chip->revision = readl(&chip->regs->revr); - - fear = readl(&chip->regs->fear); - chip->fifo = min_t(uint32_t, FEAR_TFSZ(fear), FEAR_RFSZ(fear)); - - return 0; -} - -static int get_spi_gpio(int bus, struct ftssp010_gpio *chip) -{ - uint32_t base[] = CONFIG_FTSSP010_GPIO_LIST; - - if (bus >= ARRAY_SIZE(base) || !base[bus]) - return -1; - - chip->regs = (struct ftgpio010_regs *)(base[bus] & 0xfff00000); - chip->pin = base[bus] & 0x1f; - - /* make it an output pin */ - setbits_le32(&chip->regs->dir, 1 << chip->pin); - - return 0; -} - -static int ftssp010_wait(struct ftssp010_spi *chip) -{ - struct ftssp010_regs *regs = chip->regs; - ulong t; - - /* wait until device idle */ - for (t = get_timer(0); get_timer(t) < CONFIG_FTSSP010_TIMEOUT; ) { - if (!(readl(®s->sr) & SR_BUSY)) - return 0; - } - - puts("ftspi010: busy timeout\n"); - - return -1; -} - -static int ftssp010_wait_tx(struct ftssp010_spi *chip) -{ - struct ftssp010_regs *regs = chip->regs; - ulong t; - - /* wait until tx fifo not full */ - for (t = get_timer(0); get_timer(t) < CONFIG_FTSSP010_TIMEOUT; ) { - if (readl(®s->sr) & SR_TFNF) - return 0; - } - - puts("ftssp010: tx timeout\n"); - - return -1; -} - -static int ftssp010_wait_rx(struct ftssp010_spi *chip) -{ - struct ftssp010_regs *regs = chip->regs; - ulong t; - - /* wait until rx fifo not empty */ - for (t = get_timer(0); get_timer(t) < CONFIG_FTSSP010_TIMEOUT; ) { - if (SR_RFVE(readl(®s->sr))) - return 0; - } - - puts("ftssp010: rx timeout\n"); - - return -1; -} - -static int ftssp010_spi_work_transfer_v2(struct ftssp010_spi *chip, - const void *tx_buf, void *rx_buf, int len, uint flags) -{ - struct ftssp010_regs *regs = chip->regs; - const uint8_t *txb = tx_buf; - uint8_t *rxb = rx_buf; - - while (len > 0) { - int i, depth = min(chip->fifo >> 2, len); - uint32_t xmsk = 0; - - if (tx_buf) { - for (i = 0; i < depth; ++i) { - ftssp010_wait_tx(chip); - writel(*txb++, ®s->dr); - } - xmsk |= CR2_TXEN | CR2_TXDOE; - if ((readl(®s->cr[2]) & xmsk) != xmsk) - setbits_le32(®s->cr[2], xmsk); - } - if (rx_buf) { - xmsk |= CR2_RXEN; - if ((readl(®s->cr[2]) & xmsk) != xmsk) - setbits_le32(®s->cr[2], xmsk); - for (i = 0; i < depth; ++i) { - ftssp010_wait_rx(chip); - *rxb++ = (uint8_t)readl(®s->dr); - } - } - - len -= depth; - } - - return 0; -} - -static int ftssp010_spi_work_transfer_v1(struct ftssp010_spi *chip, - const void *tx_buf, void *rx_buf, int len, uint flags) -{ - struct ftssp010_regs *regs = chip->regs; - const uint8_t *txb = tx_buf; - uint8_t *rxb = rx_buf; - - while (len > 0) { - int i, depth = min(chip->fifo >> 2, len); - uint32_t tmp; - - for (i = 0; i < depth; ++i) { - ftssp010_wait_tx(chip); - writel(txb ? (*txb++) : 0, ®s->dr); - } - for (i = 0; i < depth; ++i) { - ftssp010_wait_rx(chip); - tmp = readl(®s->dr); - if (rxb) - *rxb++ = (uint8_t)tmp; - } - - len -= depth; - } - - return 0; -} - -static void ftssp010_cs_set(struct ftssp010_spi *chip, int high) -{ - struct ftssp010_regs *regs = chip->regs; - struct ftssp010_gpio *gpio = &chip->gpio; - uint32_t mask; - - /* cs pull high/low */ - if (chip->revision >= 0x11900) { - mask = CR2_CS(chip->slave.cs) | (high ? CR2_FS : 0); - writel(mask, ®s->cr[2]); - } else if (gpio->regs) { - mask = 1 << gpio->pin; - if (high) - writel(mask, &gpio->regs->set); - else - writel(mask, &gpio->regs->clr); - } - - /* extra delay for signal propagation */ - udelay_masked(1); -} - -/* - * Determine if a SPI chipselect is valid. - * This function is provided by the board if the low-level SPI driver - * needs it to determine if a given chipselect is actually valid. - * - * Returns: 1 if bus:cs identifies a valid chip on this board, 0 - * otherwise. - */ -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - struct ftssp010_spi chip; - - if (get_spi_chip(bus, &chip)) - return 0; - - if (!cs) - return 1; - else if ((cs < 4) && (chip.revision >= 0x11900)) - return 1; - - return 0; -} - -/* - * Activate a SPI chipselect. - * This function is provided by the board code when using a driver - * that can't control its chipselects automatically (e.g. - * common/soft_spi.c). When called, it should activate the chip select - * to the device identified by "slave". - */ -void spi_cs_activate(struct spi_slave *slave) -{ - struct ftssp010_spi *chip = to_ftssp010_spi(slave); - struct ftssp010_regs *regs = chip->regs; - - /* cs pull */ - if (chip->mode & SPI_CS_HIGH) - ftssp010_cs_set(chip, 1); - else - ftssp010_cs_set(chip, 0); - - /* chip enable + fifo clear */ - setbits_le32(®s->cr[2], CR2_EN | CR2_TXFC | CR2_RXFC); -} - -/* - * Deactivate a SPI chipselect. - * This function is provided by the board code when using a driver - * that can't control its chipselects automatically (e.g. - * common/soft_spi.c). When called, it should deactivate the chip - * select to the device identified by "slave". - */ -void spi_cs_deactivate(struct spi_slave *slave) -{ - struct ftssp010_spi *chip = to_ftssp010_spi(slave); - - /* wait until chip idle */ - ftssp010_wait(chip); - - /* cs pull */ - if (chip->mode & SPI_CS_HIGH) - ftssp010_cs_set(chip, 0); - else - ftssp010_cs_set(chip, 1); -} - -void spi_init(void) -{ - /* nothing to do */ -} - -struct spi_slave *spi_setup_slave(uint bus, uint cs, uint max_hz, uint mode) -{ - struct ftssp010_spi *chip; - - if (mode & SPI_3WIRE) { - puts("ftssp010: can't do 3-wire\n"); - return NULL; - } - - if (mode & SPI_SLAVE) { - puts("ftssp010: can't do slave mode\n"); - return NULL; - } - - if (mode & SPI_PREAMBLE) { - puts("ftssp010: can't skip preamble bytes\n"); - return NULL; - } - - if (!spi_cs_is_valid(bus, cs)) { - puts("ftssp010: invalid (bus, cs)\n"); - return NULL; - } - - chip = spi_alloc_slave(struct ftssp010_spi, bus, cs); - if (!chip) - return NULL; - - if (get_spi_chip(bus, chip)) - goto free_out; - - if (chip->revision < 0x11900 && get_spi_gpio(bus, &chip->gpio)) { - puts("ftssp010: Before revision 1.19.0, its clock & cs are\n" - "controlled by tx engine which is not synced with rx engine,\n" - "so the clock & cs might be shutdown before rx engine\n" - "finishs its jobs.\n" - "If possible, please add a dedicated gpio for it.\n"); - } - - chip->mode = mode; - chip->clk = CONFIG_FTSSP010_CLOCK; - chip->div = 2; - if (max_hz) { - while (chip->div < 0xffff) { - if ((chip->clk / (2 * chip->div)) <= max_hz) - break; - chip->div += 1; - } - } - chip->speed = chip->clk / (2 * chip->div); - - return &chip->slave; - -free_out: - free(chip); - return NULL; -} - -void spi_free_slave(struct spi_slave *slave) -{ - struct ftssp010_spi *chip = to_ftssp010_spi(slave); - - free(chip); -} - -int spi_claim_bus(struct spi_slave *slave) -{ - struct ftssp010_spi *chip = to_ftssp010_spi(slave); - struct ftssp010_regs *regs = chip->regs; - - writel(CR1_SDL(8) | CR1_DIV(chip->div), ®s->cr[1]); - - if (chip->revision >= 0x11900) { - writel(CR0_OPM_MASTER | CR0_FFMT_SPI | CR0_FSPO | CR0_FLASH, - ®s->cr[0]); - writel(CR2_TXFC | CR2_RXFC, - ®s->cr[2]); - } else { - writel(CR0_OPM_MASTER | CR0_FFMT_SPI | CR0_FSPO, - ®s->cr[0]); - writel(CR2_TXFC | CR2_RXFC | CR2_EN | CR2_TXDOE, - ®s->cr[2]); - } - - if (chip->mode & SPI_LOOP) - setbits_le32(®s->cr[0], CR0_LOOP); - - if (chip->mode & SPI_CPOL) - setbits_le32(®s->cr[0], CR0_SCLKPO); - - if (chip->mode & SPI_CPHA) - setbits_le32(®s->cr[0], CR0_SCLKPH); - - spi_cs_deactivate(slave); - - return 0; -} - -void spi_release_bus(struct spi_slave *slave) -{ - struct ftssp010_spi *chip = to_ftssp010_spi(slave); - struct ftssp010_regs *regs = chip->regs; - - writel(0, ®s->cr[2]); -} - -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, - const void *dout, void *din, unsigned long flags) -{ - struct ftssp010_spi *chip = to_ftssp010_spi(slave); - uint32_t len = bitlen >> 3; - - if (flags & SPI_XFER_BEGIN) - spi_cs_activate(slave); - - if (chip->revision >= 0x11900) - ftssp010_spi_work_transfer_v2(chip, dout, din, len, flags); - else - ftssp010_spi_work_transfer_v1(chip, dout, din, len, flags); - - if (flags & SPI_XFER_END) - spi_cs_deactivate(slave); - - return 0; -} -- cgit v0.10.2 From f23d532b638893e44f5cb5f73c394c271d6918be Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 00:51:25 +0530 Subject: spi: Zap oc_tiny_spi driver Zap oc_tiny_spi driver since the boards used this driver is no longer been active. Signed-off-by: Jagan Teki Cc: Thomas Chou diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 1e3611d..507c315 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -35,7 +35,6 @@ obj-$(CONFIG_MPC52XX_SPI) += mpc52xx_spi.o obj-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o obj-$(CONFIG_MXC_SPI) += mxc_spi.o obj-$(CONFIG_MXS_SPI) += mxs_spi.o -obj-$(CONFIG_OC_TINY_SPI) += oc_tiny_spi.o obj-$(CONFIG_OMAP3_SPI) += omap3_spi.o obj-$(CONFIG_SANDBOX_SPI) += sandbox_spi.o obj-$(CONFIG_SH_SPI) += sh_spi.o diff --git a/drivers/spi/oc_tiny_spi.c b/drivers/spi/oc_tiny_spi.c deleted file mode 100644 index 4de5d00..0000000 --- a/drivers/spi/oc_tiny_spi.c +++ /dev/null @@ -1,245 +0,0 @@ -/* - * Opencore tiny_spi driver - * - * http://opencores.org/project,tiny_spi - * - * based on bfin_spi.c - * Copyright (c) 2005-2008 Analog Devices Inc. - * Copyright (C) 2010 Thomas Chou - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include - -#define TINY_SPI_STATUS_TXE 0x1 -#define TINY_SPI_STATUS_TXR 0x2 - -struct tiny_spi_regs { - unsigned rxdata; /* Rx data reg */ - unsigned txdata; /* Tx data reg */ - unsigned status; /* Status reg */ - unsigned control; /* Control reg */ - unsigned baud; /* Baud reg */ -}; - -struct tiny_spi_host { - uint base; - uint freq; - uint baudwidth; -}; -static const struct tiny_spi_host tiny_spi_host_list[] = - CONFIG_SYS_TINY_SPI_LIST; - -struct tiny_spi_slave { - struct spi_slave slave; - const struct tiny_spi_host *host; - uint mode; - uint baud; - uint flg; -}; -#define to_tiny_spi_slave(s) container_of(s, struct tiny_spi_slave, slave) - -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - return bus < ARRAY_SIZE(tiny_spi_host_list) && gpio_is_valid(cs); -} - -void spi_cs_activate(struct spi_slave *slave) -{ - struct tiny_spi_slave *tiny_spi = to_tiny_spi_slave(slave); - unsigned int cs = slave->cs; - - gpio_set_value(cs, tiny_spi->flg); - debug("%s: SPI_CS_GPIO:%x\n", __func__, gpio_get_value(cs)); -} - -void spi_cs_deactivate(struct spi_slave *slave) -{ - struct tiny_spi_slave *tiny_spi = to_tiny_spi_slave(slave); - unsigned int cs = slave->cs; - - gpio_set_value(cs, !tiny_spi->flg); - debug("%s: SPI_CS_GPIO:%x\n", __func__, gpio_get_value(cs)); -} - -void spi_set_speed(struct spi_slave *slave, uint hz) -{ - struct tiny_spi_slave *tiny_spi = to_tiny_spi_slave(slave); - const struct tiny_spi_host *host = tiny_spi->host; - - tiny_spi->baud = min(DIV_ROUND_UP(host->freq, hz * 2), - (1 << host->baudwidth)) - 1; - debug("%s: speed %u actual %u\n", __func__, hz, - host->freq / ((tiny_spi->baud + 1) * 2)); -} - -void spi_init(void) -{ -} - -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, - unsigned int hz, unsigned int mode) -{ - struct tiny_spi_slave *tiny_spi; - - if (!spi_cs_is_valid(bus, cs) || gpio_request(cs, "tiny_spi")) - return NULL; - - tiny_spi = spi_alloc_slave(struct tiny_spi_slave, bus, cs); - if (!tiny_spi) - return NULL; - - tiny_spi->host = &tiny_spi_host_list[bus]; - tiny_spi->mode = mode & (SPI_CPOL | SPI_CPHA); - tiny_spi->flg = mode & SPI_CS_HIGH ? 1 : 0; - spi_set_speed(&tiny_spi->slave, hz); - - debug("%s: bus:%i cs:%i base:%lx\n", __func__, - bus, cs, tiny_spi->host->base); - return &tiny_spi->slave; -} - -void spi_free_slave(struct spi_slave *slave) -{ - struct tiny_spi_slave *tiny_spi = to_tiny_spi_slave(slave); - - gpio_free(slave->cs); - free(tiny_spi); -} - -int spi_claim_bus(struct spi_slave *slave) -{ - struct tiny_spi_slave *tiny_spi = to_tiny_spi_slave(slave); - struct tiny_spi_regs *regs = (void *)tiny_spi->host->base; - - debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); - gpio_direction_output(slave->cs, !tiny_spi->flg); - writel(tiny_spi->mode, ®s->control); - writel(tiny_spi->baud, ®s->baud); - return 0; -} - -void spi_release_bus(struct spi_slave *slave) -{ - debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); -} - -#ifndef CONFIG_TINY_SPI_IDLE_VAL -# define CONFIG_TINY_SPI_IDLE_VAL 0xff -#endif - -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, - void *din, unsigned long flags) -{ - struct tiny_spi_slave *tiny_spi = to_tiny_spi_slave(slave); - struct tiny_spi_regs *regs = (void *)tiny_spi->host->base; - const u8 *txp = dout; - u8 *rxp = din; - uint bytes = bitlen / 8; - uint i; - - debug("%s: bus:%i cs:%i bitlen:%i bytes:%i flags:%lx\n", __func__, - slave->bus, slave->cs, bitlen, bytes, flags); - if (bitlen == 0) - goto done; - - /* assume to do 8 bits transfers */ - if (bitlen % 8) { - flags |= SPI_XFER_END; - goto done; - } - - if (flags & SPI_XFER_BEGIN) - spi_cs_activate(slave); - - /* we need to tighten the transfer loop */ - if (txp && rxp) { - writeb(*txp++, ®s->txdata); - if (bytes > 1) { - writeb(*txp++, ®s->txdata); - for (i = 2; i < bytes; i++) { - u8 rx, tx = *txp++; - while (!(readb(®s->status) & - TINY_SPI_STATUS_TXR)) - ; - rx = readb(®s->txdata); - writeb(tx, ®s->txdata); - *rxp++ = rx; - } - while (!(readb(®s->status) & - TINY_SPI_STATUS_TXR)) - ; - *rxp++ = readb(®s->txdata); - } - while (!(readb(®s->status) & - TINY_SPI_STATUS_TXE)) - ; - *rxp++ = readb(®s->rxdata); - } else if (rxp) { - writeb(CONFIG_TINY_SPI_IDLE_VAL, ®s->txdata); - if (bytes > 1) { - writeb(CONFIG_TINY_SPI_IDLE_VAL, - ®s->txdata); - for (i = 2; i < bytes; i++) { - u8 rx; - while (!(readb(®s->status) & - TINY_SPI_STATUS_TXR)) - ; - rx = readb(®s->txdata); - writeb(CONFIG_TINY_SPI_IDLE_VAL, - ®s->txdata); - *rxp++ = rx; - } - while (!(readb(®s->status) & - TINY_SPI_STATUS_TXR)) - ; - *rxp++ = readb(®s->txdata); - } - while (!(readb(®s->status) & - TINY_SPI_STATUS_TXE)) - ; - *rxp++ = readb(®s->rxdata); - } else if (txp) { - writeb(*txp++, ®s->txdata); - if (bytes > 1) { - writeb(*txp++, ®s->txdata); - for (i = 2; i < bytes; i++) { - u8 tx = *txp++; - while (!(readb(®s->status) & - TINY_SPI_STATUS_TXR)) - ; - writeb(tx, ®s->txdata); - } - } - while (!(readb(®s->status) & - TINY_SPI_STATUS_TXE)) - ; - } else { - writeb(CONFIG_TINY_SPI_IDLE_VAL, ®s->txdata); - if (bytes > 1) { - writeb(CONFIG_TINY_SPI_IDLE_VAL, - ®s->txdata); - for (i = 2; i < bytes; i++) { - while (!(readb(®s->status) & - TINY_SPI_STATUS_TXR)) - ; - writeb(CONFIG_TINY_SPI_IDLE_VAL, - ®s->txdata); - } - } - while (!(readb(®s->status) & - TINY_SPI_STATUS_TXE)) - ; - } - - done: - if (flags & SPI_XFER_END) - spi_cs_deactivate(slave); - - return 0; -} -- cgit v0.10.2 From f93542a87354c0cb94b3001a9830cd1b122b786b Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 00:51:26 +0530 Subject: spi: xilinx_spi: Move header code to driver Move the header code into driver for more readable and easy to access it. Signed-off-by: Jagan Teki Acked-by: Michal Simek diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c index 56d99d1..8073edc 100644 --- a/drivers/spi/xilinx_spi.c +++ b/drivers/spi/xilinx_spi.c @@ -21,7 +21,118 @@ #include #include -#include "xilinx_spi.h" +/* + * Xilinx SPI Register Definition + * + * [1]: [0]/ip_documentation/xps_spi.pdf + * page 8, Register Descriptions + * [2]: [0]/ip_documentation/axi_spi_ds742.pdf + * page 7, Register Overview Table + */ +struct xilinx_spi_reg { + u32 __space0__[7]; + u32 dgier; /* Device Global Interrupt Enable Register (DGIER) */ + u32 ipisr; /* IP Interrupt Status Register (IPISR) */ + u32 __space1__; + u32 ipier; /* IP Interrupt Enable Register (IPIER) */ + u32 __space2__[5]; + u32 srr; /* Softare Reset Register (SRR) */ + u32 __space3__[7]; + u32 spicr; /* SPI Control Register (SPICR) */ + u32 spisr; /* SPI Status Register (SPISR) */ + u32 spidtr; /* SPI Data Transmit Register (SPIDTR) */ + u32 spidrr; /* SPI Data Receive Register (SPIDRR) */ + u32 spissr; /* SPI Slave Select Register (SPISSR) */ + u32 spitfor; /* SPI Transmit FIFO Occupancy Register (SPITFOR) */ + u32 spirfor; /* SPI Receive FIFO Occupancy Register (SPIRFOR) */ +}; + +/* Device Global Interrupt Enable Register (dgier), [1] p15, [2] p15 */ +#define DGIER_GIE (1 << 31) + +/* IP Interrupt Status Register (ipisr), [1] p15, [2] p15 */ +#define IPISR_DRR_NOT_EMPTY (1 << 8) +#define IPISR_SLAVE_SELECT (1 << 7) +#define IPISR_TXF_HALF_EMPTY (1 << 6) +#define IPISR_DRR_OVERRUN (1 << 5) +#define IPISR_DRR_FULL (1 << 4) +#define IPISR_DTR_UNDERRUN (1 << 3) +#define IPISR_DTR_EMPTY (1 << 2) +#define IPISR_SLAVE_MODF (1 << 1) +#define IPISR_MODF (1 << 0) + +/* IP Interrupt Enable Register (ipier), [1] p17, [2] p18 */ +#define IPIER_DRR_NOT_EMPTY (1 << 8) +#define IPIER_SLAVE_SELECT (1 << 7) +#define IPIER_TXF_HALF_EMPTY (1 << 6) +#define IPIER_DRR_OVERRUN (1 << 5) +#define IPIER_DRR_FULL (1 << 4) +#define IPIER_DTR_UNDERRUN (1 << 3) +#define IPIER_DTR_EMPTY (1 << 2) +#define IPIER_SLAVE_MODF (1 << 1) +#define IPIER_MODF (1 << 0) + +/* Softare Reset Register (srr), [1] p9, [2] p8 */ +#define SRR_RESET_CODE 0x0000000A + +/* SPI Control Register (spicr), [1] p9, [2] p8 */ +#define SPICR_LSB_FIRST (1 << 9) +#define SPICR_MASTER_INHIBIT (1 << 8) +#define SPICR_MANUAL_SS (1 << 7) +#define SPICR_RXFIFO_RESEST (1 << 6) +#define SPICR_TXFIFO_RESEST (1 << 5) +#define SPICR_CPHA (1 << 4) +#define SPICR_CPOL (1 << 3) +#define SPICR_MASTER_MODE (1 << 2) +#define SPICR_SPE (1 << 1) +#define SPICR_LOOP (1 << 0) + +/* SPI Status Register (spisr), [1] p11, [2] p10 */ +#define SPISR_SLAVE_MODE_SELECT (1 << 5) +#define SPISR_MODF (1 << 4) +#define SPISR_TX_FULL (1 << 3) +#define SPISR_TX_EMPTY (1 << 2) +#define SPISR_RX_FULL (1 << 1) +#define SPISR_RX_EMPTY (1 << 0) + +/* SPI Data Transmit Register (spidtr), [1] p12, [2] p12 */ +#define SPIDTR_8BIT_MASK (0xff << 0) +#define SPIDTR_16BIT_MASK (0xffff << 0) +#define SPIDTR_32BIT_MASK (0xffffffff << 0) + +/* SPI Data Receive Register (spidrr), [1] p12, [2] p12 */ +#define SPIDRR_8BIT_MASK (0xff << 0) +#define SPIDRR_16BIT_MASK (0xffff << 0) +#define SPIDRR_32BIT_MASK (0xffffffff << 0) + +/* SPI Slave Select Register (spissr), [1] p13, [2] p13 */ +#define SPISSR_MASK(cs) (1 << (cs)) +#define SPISSR_ACT(cs) ~SPISSR_MASK(cs) +#define SPISSR_OFF ~0UL + +/* SPI Transmit FIFO Occupancy Register (spitfor), [1] p13, [2] p14 */ +#define SPITFOR_OCYVAL_POS 0 +#define SPITFOR_OCYVAL_MASK (0xf << SPITFOR_OCYVAL_POS) + +/* SPI Receive FIFO Occupancy Register (spirfor), [1] p14, [2] p14 */ +#define SPIRFOR_OCYVAL_POS 0 +#define SPIRFOR_OCYVAL_MASK (0xf << SPIRFOR_OCYVAL_POS) + +/* SPI Software Reset Register (ssr) */ +#define SPISSR_RESET_VALUE 0x0a + +struct xilinx_spi_slave { + struct spi_slave slave; + struct xilinx_spi_reg *regs; + unsigned int freq; + unsigned int mode; +}; + +static inline struct xilinx_spi_slave *to_xilinx_spi_slave( + struct spi_slave *slave) +{ + return container_of(slave, struct xilinx_spi_slave, slave); +} #ifndef CONFIG_SYS_XILINX_SPI_LIST #define CONFIG_SYS_XILINX_SPI_LIST { CONFIG_SYS_SPI_BASE } diff --git a/drivers/spi/xilinx_spi.h b/drivers/spi/xilinx_spi.h deleted file mode 100644 index ce7d82c..0000000 --- a/drivers/spi/xilinx_spi.h +++ /dev/null @@ -1,138 +0,0 @@ -/* - * Xilinx SPI driver - * - * XPS/AXI bus interface - * - * based on bfin_spi.c, by way of altera_spi.c - * Copyright (c) 2005-2008 Analog Devices Inc. - * Copyright (c) 2010 Thomas Chou - * Copyright (c) 2010 Graeme Smecher - * Copyright (c) 2012 Stephan Linz - * - * SPDX-License-Identifier: GPL-2.0+ - * - * [0]: http://www.xilinx.com/support/documentation - * - * [S]: [0]/ip_documentation/xps_spi.pdf - * [0]/ip_documentation/axi_spi_ds742.pdf - */ -#ifndef _XILINX_SPI_ -#define _XILINX_SPI_ - -#include -#include - -/* - * Xilinx SPI Register Definition - * - * [1]: [0]/ip_documentation/xps_spi.pdf - * page 8, Register Descriptions - * [2]: [0]/ip_documentation/axi_spi_ds742.pdf - * page 7, Register Overview Table - */ -struct xilinx_spi_reg { - u32 __space0__[7]; - u32 dgier; /* Device Global Interrupt Enable Register (DGIER) */ - u32 ipisr; /* IP Interrupt Status Register (IPISR) */ - u32 __space1__; - u32 ipier; /* IP Interrupt Enable Register (IPIER) */ - u32 __space2__[5]; - u32 srr; /* Softare Reset Register (SRR) */ - u32 __space3__[7]; - u32 spicr; /* SPI Control Register (SPICR) */ - u32 spisr; /* SPI Status Register (SPISR) */ - u32 spidtr; /* SPI Data Transmit Register (SPIDTR) */ - u32 spidrr; /* SPI Data Receive Register (SPIDRR) */ - u32 spissr; /* SPI Slave Select Register (SPISSR) */ - u32 spitfor; /* SPI Transmit FIFO Occupancy Register (SPITFOR) */ - u32 spirfor; /* SPI Receive FIFO Occupancy Register (SPIRFOR) */ -}; - -/* Device Global Interrupt Enable Register (dgier), [1] p15, [2] p15 */ -#define DGIER_GIE (1 << 31) - -/* IP Interrupt Status Register (ipisr), [1] p15, [2] p15 */ -#define IPISR_DRR_NOT_EMPTY (1 << 8) -#define IPISR_SLAVE_SELECT (1 << 7) -#define IPISR_TXF_HALF_EMPTY (1 << 6) -#define IPISR_DRR_OVERRUN (1 << 5) -#define IPISR_DRR_FULL (1 << 4) -#define IPISR_DTR_UNDERRUN (1 << 3) -#define IPISR_DTR_EMPTY (1 << 2) -#define IPISR_SLAVE_MODF (1 << 1) -#define IPISR_MODF (1 << 0) - -/* IP Interrupt Enable Register (ipier), [1] p17, [2] p18 */ -#define IPIER_DRR_NOT_EMPTY (1 << 8) -#define IPIER_SLAVE_SELECT (1 << 7) -#define IPIER_TXF_HALF_EMPTY (1 << 6) -#define IPIER_DRR_OVERRUN (1 << 5) -#define IPIER_DRR_FULL (1 << 4) -#define IPIER_DTR_UNDERRUN (1 << 3) -#define IPIER_DTR_EMPTY (1 << 2) -#define IPIER_SLAVE_MODF (1 << 1) -#define IPIER_MODF (1 << 0) - -/* Softare Reset Register (srr), [1] p9, [2] p8 */ -#define SRR_RESET_CODE 0x0000000A - -/* SPI Control Register (spicr), [1] p9, [2] p8 */ -#define SPICR_LSB_FIRST (1 << 9) -#define SPICR_MASTER_INHIBIT (1 << 8) -#define SPICR_MANUAL_SS (1 << 7) -#define SPICR_RXFIFO_RESEST (1 << 6) -#define SPICR_TXFIFO_RESEST (1 << 5) -#define SPICR_CPHA (1 << 4) -#define SPICR_CPOL (1 << 3) -#define SPICR_MASTER_MODE (1 << 2) -#define SPICR_SPE (1 << 1) -#define SPICR_LOOP (1 << 0) - -/* SPI Status Register (spisr), [1] p11, [2] p10 */ -#define SPISR_SLAVE_MODE_SELECT (1 << 5) -#define SPISR_MODF (1 << 4) -#define SPISR_TX_FULL (1 << 3) -#define SPISR_TX_EMPTY (1 << 2) -#define SPISR_RX_FULL (1 << 1) -#define SPISR_RX_EMPTY (1 << 0) - -/* SPI Data Transmit Register (spidtr), [1] p12, [2] p12 */ -#define SPIDTR_8BIT_MASK (0xff << 0) -#define SPIDTR_16BIT_MASK (0xffff << 0) -#define SPIDTR_32BIT_MASK (0xffffffff << 0) - -/* SPI Data Receive Register (spidrr), [1] p12, [2] p12 */ -#define SPIDRR_8BIT_MASK (0xff << 0) -#define SPIDRR_16BIT_MASK (0xffff << 0) -#define SPIDRR_32BIT_MASK (0xffffffff << 0) - -/* SPI Slave Select Register (spissr), [1] p13, [2] p13 */ -#define SPISSR_MASK(cs) (1 << (cs)) -#define SPISSR_ACT(cs) ~SPISSR_MASK(cs) -#define SPISSR_OFF ~0UL - -/* SPI Transmit FIFO Occupancy Register (spitfor), [1] p13, [2] p14 */ -#define SPITFOR_OCYVAL_POS 0 -#define SPITFOR_OCYVAL_MASK (0xf << SPITFOR_OCYVAL_POS) - -/* SPI Receive FIFO Occupancy Register (spirfor), [1] p14, [2] p14 */ -#define SPIRFOR_OCYVAL_POS 0 -#define SPIRFOR_OCYVAL_MASK (0xf << SPIRFOR_OCYVAL_POS) - -/* SPI Software Reset Register (ssr) */ -#define SPISSR_RESET_VALUE 0x0a - -struct xilinx_spi_slave { - struct spi_slave slave; - struct xilinx_spi_reg *regs; - unsigned int freq; - unsigned int mode; -}; - -static inline struct xilinx_spi_slave *to_xilinx_spi_slave( - struct spi_slave *slave) -{ - return container_of(slave, struct xilinx_spi_slave, slave); -} - -#endif /* _XILINX_SPI_ */ -- cgit v0.10.2 From a7b6ef05bfc4b219436ceb7d078f78c489170b28 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 00:51:27 +0530 Subject: spi: xilinx_spi: Driver clean-up - Zap unneeded macros - Re-arrange the code - Removed __attribute__((weak)) - Replace __func__ macro with func names to save macro transition. - Re-arranged comment lines. - Arrange driver code in more readable format[1] [1] http://patchwork.ozlabs.org/patch/265683/ Signed-off-by: Jagan Teki Acked-by: Michal Simek diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c index 8073edc..650e494 100644 --- a/drivers/spi/xilinx_spi.c +++ b/drivers/spi/xilinx_spi.c @@ -1,79 +1,31 @@ /* * Xilinx SPI driver * - * supports 8 bit SPI transfers only, with or w/o FIFO + * Supports 8 bit SPI transfers only, with or w/o FIFO * - * based on bfin_spi.c, by way of altera_spi.c - * Copyright (c) 2005-2008 Analog Devices Inc. - * Copyright (c) 2010 Thomas Chou - * Copyright (c) 2010 Graeme Smecher + * Based on bfin_spi.c, by way of altera_spi.c * Copyright (c) 2012 Stephan Linz + * Copyright (c) 2010 Graeme Smecher + * Copyright (c) 2010 Thomas Chou + * Copyright (c) 2005-2008 Analog Devices Inc. * * SPDX-License-Identifier: GPL-2.0+ - * - * [0]: http://www.xilinx.com/support/documentation - * - * [S]: [0]/ip_documentation/xps_spi.pdf - * [0]/ip_documentation/axi_spi_ds742.pdf */ + #include #include #include #include /* - * Xilinx SPI Register Definition + * [0]: http://www.xilinx.com/support/documentation * + * Xilinx SPI Register Definitions * [1]: [0]/ip_documentation/xps_spi.pdf * page 8, Register Descriptions * [2]: [0]/ip_documentation/axi_spi_ds742.pdf * page 7, Register Overview Table */ -struct xilinx_spi_reg { - u32 __space0__[7]; - u32 dgier; /* Device Global Interrupt Enable Register (DGIER) */ - u32 ipisr; /* IP Interrupt Status Register (IPISR) */ - u32 __space1__; - u32 ipier; /* IP Interrupt Enable Register (IPIER) */ - u32 __space2__[5]; - u32 srr; /* Softare Reset Register (SRR) */ - u32 __space3__[7]; - u32 spicr; /* SPI Control Register (SPICR) */ - u32 spisr; /* SPI Status Register (SPISR) */ - u32 spidtr; /* SPI Data Transmit Register (SPIDTR) */ - u32 spidrr; /* SPI Data Receive Register (SPIDRR) */ - u32 spissr; /* SPI Slave Select Register (SPISSR) */ - u32 spitfor; /* SPI Transmit FIFO Occupancy Register (SPITFOR) */ - u32 spirfor; /* SPI Receive FIFO Occupancy Register (SPIRFOR) */ -}; - -/* Device Global Interrupt Enable Register (dgier), [1] p15, [2] p15 */ -#define DGIER_GIE (1 << 31) - -/* IP Interrupt Status Register (ipisr), [1] p15, [2] p15 */ -#define IPISR_DRR_NOT_EMPTY (1 << 8) -#define IPISR_SLAVE_SELECT (1 << 7) -#define IPISR_TXF_HALF_EMPTY (1 << 6) -#define IPISR_DRR_OVERRUN (1 << 5) -#define IPISR_DRR_FULL (1 << 4) -#define IPISR_DTR_UNDERRUN (1 << 3) -#define IPISR_DTR_EMPTY (1 << 2) -#define IPISR_SLAVE_MODF (1 << 1) -#define IPISR_MODF (1 << 0) - -/* IP Interrupt Enable Register (ipier), [1] p17, [2] p18 */ -#define IPIER_DRR_NOT_EMPTY (1 << 8) -#define IPIER_SLAVE_SELECT (1 << 7) -#define IPIER_TXF_HALF_EMPTY (1 << 6) -#define IPIER_DRR_OVERRUN (1 << 5) -#define IPIER_DRR_FULL (1 << 4) -#define IPIER_DTR_UNDERRUN (1 << 3) -#define IPIER_DTR_EMPTY (1 << 2) -#define IPIER_SLAVE_MODF (1 << 1) -#define IPIER_MODF (1 << 0) - -/* Softare Reset Register (srr), [1] p9, [2] p8 */ -#define SRR_RESET_CODE 0x0000000A /* SPI Control Register (spicr), [1] p9, [2] p8 */ #define SPICR_LSB_FIRST (1 << 9) @@ -110,17 +62,42 @@ struct xilinx_spi_reg { #define SPISSR_ACT(cs) ~SPISSR_MASK(cs) #define SPISSR_OFF ~0UL -/* SPI Transmit FIFO Occupancy Register (spitfor), [1] p13, [2] p14 */ -#define SPITFOR_OCYVAL_POS 0 -#define SPITFOR_OCYVAL_MASK (0xf << SPITFOR_OCYVAL_POS) - -/* SPI Receive FIFO Occupancy Register (spirfor), [1] p14, [2] p14 */ -#define SPIRFOR_OCYVAL_POS 0 -#define SPIRFOR_OCYVAL_MASK (0xf << SPIRFOR_OCYVAL_POS) - /* SPI Software Reset Register (ssr) */ #define SPISSR_RESET_VALUE 0x0a +#define XILSPI_MAX_XFER_BITS 8 +#define XILSPI_SPICR_DFLT_ON (SPICR_MANUAL_SS | SPICR_MASTER_MODE | \ + SPICR_SPE) +#define XILSPI_SPICR_DFLT_OFF (SPICR_MASTER_INHIBIT | SPICR_MANUAL_SS) + +#ifndef CONFIG_XILINX_SPI_IDLE_VAL +#define CONFIG_XILINX_SPI_IDLE_VAL 0xff +#endif + +#ifndef CONFIG_SYS_XILINX_SPI_LIST +#define CONFIG_SYS_XILINX_SPI_LIST { CONFIG_SYS_SPI_BASE } +#endif + +/* xilinx spi register set */ +struct xilinx_spi_reg { + u32 __space0__[7]; + u32 dgier; /* Device Global Interrupt Enable Register (DGIER) */ + u32 ipisr; /* IP Interrupt Status Register (IPISR) */ + u32 __space1__; + u32 ipier; /* IP Interrupt Enable Register (IPIER) */ + u32 __space2__[5]; + u32 srr; /* Softare Reset Register (SRR) */ + u32 __space3__[7]; + u32 spicr; /* SPI Control Register (SPICR) */ + u32 spisr; /* SPI Status Register (SPISR) */ + u32 spidtr; /* SPI Data Transmit Register (SPIDTR) */ + u32 spidrr; /* SPI Data Receive Register (SPIDRR) */ + u32 spissr; /* SPI Slave Select Register (SPISSR) */ + u32 spitfor; /* SPI Transmit FIFO Occupancy Register (SPITFOR) */ + u32 spirfor; /* SPI Receive FIFO Occupancy Register (SPIRFOR) */ +}; + +/* xilinx spi slave */ struct xilinx_spi_slave { struct spi_slave slave; struct xilinx_spi_reg *regs; @@ -129,37 +106,17 @@ struct xilinx_spi_slave { }; static inline struct xilinx_spi_slave *to_xilinx_spi_slave( - struct spi_slave *slave) + struct spi_slave *slave) { return container_of(slave, struct xilinx_spi_slave, slave); } -#ifndef CONFIG_SYS_XILINX_SPI_LIST -#define CONFIG_SYS_XILINX_SPI_LIST { CONFIG_SYS_SPI_BASE } -#endif - -#ifndef CONFIG_XILINX_SPI_IDLE_VAL -#define CONFIG_XILINX_SPI_IDLE_VAL 0xff -#endif - -#define XILSPI_SPICR_DFLT_ON (SPICR_MANUAL_SS | \ - SPICR_MASTER_MODE | \ - SPICR_SPE) - -#define XILSPI_SPICR_DFLT_OFF (SPICR_MASTER_INHIBIT | \ - SPICR_MANUAL_SS) - -#define XILSPI_MAX_XFER_BITS 8 - static unsigned long xilinx_spi_base_list[] = CONFIG_SYS_XILINX_SPI_LIST; - -__attribute__((weak)) int spi_cs_is_valid(unsigned int bus, unsigned int cs) { return bus < ARRAY_SIZE(xilinx_spi_base_list) && cs < 32; } -__attribute__((weak)) void spi_cs_activate(struct spi_slave *slave) { struct xilinx_spi_slave *xilspi = to_xilinx_spi_slave(slave); @@ -167,7 +124,6 @@ void spi_cs_activate(struct spi_slave *slave) writel(SPISSR_ACT(slave->cs), &xilspi->regs->spissr); } -__attribute__((weak)) void spi_cs_deactivate(struct spi_slave *slave) { struct xilinx_spi_slave *xilspi = to_xilinx_spi_slave(slave); @@ -180,33 +136,26 @@ void spi_init(void) /* do nothing */ } -void spi_set_speed(struct spi_slave *slave, uint hz) -{ - /* xilinx spi core does not support programmable speed */ -} - struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, unsigned int max_hz, unsigned int mode) { struct xilinx_spi_slave *xilspi; if (!spi_cs_is_valid(bus, cs)) { - printf("XILSPI error: %s: unsupported bus %d / cs %d\n", - __func__, bus, cs); + printf("XILSPI error: unsupported bus %d / cs %d\n", bus, cs); return NULL; } xilspi = spi_alloc_slave(struct xilinx_spi_slave, bus, cs); if (!xilspi) { - printf("XILSPI error: %s: malloc of SPI structure failed\n", - __func__); + printf("XILSPI error: malloc of SPI structure failed\n"); return NULL; } xilspi->regs = (struct xilinx_spi_reg *)xilinx_spi_base_list[bus]; xilspi->freq = max_hz; xilspi->mode = mode; - debug("%s: bus:%i cs:%i base:%p mode:%x max_hz:%d\n", __func__, - bus, cs, xilspi->regs, xilspi->mode, xilspi->freq); + debug("spi_setup_slave: bus:%i cs:%i base:%p mode:%x max_hz:%d\n", + bus, cs, xilspi->regs, xilspi->mode, xilspi->freq); writel(SPISSR_RESET_VALUE, &xilspi->regs->srr); @@ -225,7 +174,7 @@ int spi_claim_bus(struct spi_slave *slave) struct xilinx_spi_slave *xilspi = to_xilinx_spi_slave(slave); u32 spicr; - debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); + debug("spi_claim_bus: bus:%i cs:%i\n", slave->bus, slave->cs); writel(SPISSR_OFF, &xilspi->regs->spissr); spicr = XILSPI_SPICR_DFLT_ON; @@ -246,7 +195,7 @@ void spi_release_bus(struct spi_slave *slave) { struct xilinx_spi_slave *xilspi = to_xilinx_spi_slave(slave); - debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); + debug("spi_release_bus: bus:%i cs:%i\n", slave->bus, slave->cs); writel(SPISSR_OFF, &xilspi->regs->spissr); writel(XILSPI_SPICR_DFLT_OFF, &xilspi->regs->spicr); } @@ -262,14 +211,15 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, unsigned rxecount = 17; /* max. 16 elements in FIFO, leftover 1 */ unsigned global_timeout; - debug("%s: bus:%i cs:%i bitlen:%i bytes:%i flags:%lx\n", __func__, - slave->bus, slave->cs, bitlen, bytes, flags); + debug("spi_xfer: bus:%i cs:%i bitlen:%i bytes:%i flags:%lx\n", + slave->bus, slave->cs, bitlen, bytes, flags); + if (bitlen == 0) goto done; if (bitlen % XILSPI_MAX_XFER_BITS) { - printf("XILSPI warning: %s: Not a multiple of %d bits\n", - __func__, XILSPI_MAX_XFER_BITS); + printf("XILSPI warning: Not a multiple of %d bits\n", + XILSPI_MAX_XFER_BITS); flags |= SPI_XFER_END; goto done; } @@ -281,7 +231,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, } if (!rxecount) { - printf("XILSPI error: %s: Rx buffer not empty\n", __func__); + printf("XILSPI error: Rx buffer not empty\n"); return -1; } @@ -296,7 +246,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, unsigned timeout = global_timeout; /* get Tx element from data out buffer and count up */ unsigned char d = txp ? *txp++ : CONFIG_XILINX_SPI_IDLE_VAL; - debug("%s: tx:%x ", __func__, d); + debug("spi_xfer: tx:%x ", d); /* write out and wait for processing (receive data) */ writel(d & SPIDTR_8BIT_MASK, &xilspi->regs->spidtr); @@ -307,7 +257,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, } if (!timeout) { - printf("XILSPI error: %s: Xfer timeout\n", __func__); + printf("XILSPI error: Xfer timeout\n"); return -1; } @@ -315,7 +265,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, d = readl(&xilspi->regs->spidrr) & SPIDRR_8BIT_MASK; if (rxp) *rxp++ = d; - debug("rx:%x\n", d); + debug("spi_xfer: rx:%x\n", d); } done: -- cgit v0.10.2 From e6d2fbf70acb57e778e9be2f30df15c344c37902 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 00:51:28 +0530 Subject: spi: davinci_spi: Move header code to driver Move the header code into driver for more readable and easy to access it. Signed-off-by: Jagan Teki Cc: Rex Chang Cc: Murali Karicheri diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c index bf18362..e0ecf99 100644 --- a/drivers/spi/davinci_spi.c +++ b/drivers/spi/davinci_spi.c @@ -13,7 +13,115 @@ #include #include #include -#include "davinci_spi.h" + +struct davinci_spi_regs { + dv_reg gcr0; /* 0x00 */ + dv_reg gcr1; /* 0x04 */ + dv_reg int0; /* 0x08 */ + dv_reg lvl; /* 0x0c */ + dv_reg flg; /* 0x10 */ + dv_reg pc0; /* 0x14 */ + dv_reg pc1; /* 0x18 */ + dv_reg pc2; /* 0x1c */ + dv_reg pc3; /* 0x20 */ + dv_reg pc4; /* 0x24 */ + dv_reg pc5; /* 0x28 */ + dv_reg rsvd[3]; + dv_reg dat0; /* 0x38 */ + dv_reg dat1; /* 0x3c */ + dv_reg buf; /* 0x40 */ + dv_reg emu; /* 0x44 */ + dv_reg delay; /* 0x48 */ + dv_reg def; /* 0x4c */ + dv_reg fmt0; /* 0x50 */ + dv_reg fmt1; /* 0x54 */ + dv_reg fmt2; /* 0x58 */ + dv_reg fmt3; /* 0x5c */ + dv_reg intvec0; /* 0x60 */ + dv_reg intvec1; /* 0x64 */ +}; + +#define BIT(x) (1 << (x)) + +/* SPIGCR0 */ +#define SPIGCR0_SPIENA_MASK 0x1 +#define SPIGCR0_SPIRST_MASK 0x0 + +/* SPIGCR0 */ +#define SPIGCR1_CLKMOD_MASK BIT(1) +#define SPIGCR1_MASTER_MASK BIT(0) +#define SPIGCR1_SPIENA_MASK BIT(24) + +/* SPIPC0 */ +#define SPIPC0_DIFUN_MASK BIT(11) /* SIMO */ +#define SPIPC0_DOFUN_MASK BIT(10) /* SOMI */ +#define SPIPC0_CLKFUN_MASK BIT(9) /* CLK */ +#define SPIPC0_EN0FUN_MASK BIT(0) + +/* SPIFMT0 */ +#define SPIFMT_SHIFTDIR_SHIFT 20 +#define SPIFMT_POLARITY_SHIFT 17 +#define SPIFMT_PHASE_SHIFT 16 +#define SPIFMT_PRESCALE_SHIFT 8 + +/* SPIDAT1 */ +#define SPIDAT1_CSHOLD_SHIFT 28 +#define SPIDAT1_CSNR_SHIFT 16 + +/* SPIDELAY */ +#define SPI_C2TDELAY_SHIFT 24 +#define SPI_T2CDELAY_SHIFT 16 + +/* SPIBUF */ +#define SPIBUF_RXEMPTY_MASK BIT(31) +#define SPIBUF_TXFULL_MASK BIT(29) + +/* SPIDEF */ +#define SPIDEF_CSDEF0_MASK BIT(0) + +#define SPI0_BUS 0 +#define SPI0_BASE CONFIG_SYS_SPI_BASE +/* + * Define default SPI0_NUM_CS as 1 for existing platforms that uses this + * driver. Platform can configure number of CS using CONFIG_SYS_SPI0_NUM_CS + * if more than one CS is supported and by defining CONFIG_SYS_SPI0. + */ +#ifndef CONFIG_SYS_SPI0 +#define SPI0_NUM_CS 1 +#else +#define SPI0_NUM_CS CONFIG_SYS_SPI0_NUM_CS +#endif + +/* + * define CONFIG_SYS_SPI1 when platform has spi-1 device (bus #1) and + * CONFIG_SYS_SPI1_NUM_CS defines number of CS on this bus + */ +#ifdef CONFIG_SYS_SPI1 +#define SPI1_BUS 1 +#define SPI1_NUM_CS CONFIG_SYS_SPI1_NUM_CS +#define SPI1_BASE CONFIG_SYS_SPI1_BASE +#endif + +/* + * define CONFIG_SYS_SPI2 when platform has spi-2 device (bus #2) and + * CONFIG_SYS_SPI2_NUM_CS defines number of CS on this bus + */ +#ifdef CONFIG_SYS_SPI2 +#define SPI2_BUS 2 +#define SPI2_NUM_CS CONFIG_SYS_SPI2_NUM_CS +#define SPI2_BASE CONFIG_SYS_SPI2_BASE +#endif + +struct davinci_spi_slave { + struct spi_slave slave; + struct davinci_spi_regs *regs; + unsigned int freq; +}; + +static inline struct davinci_spi_slave *to_davinci_spi(struct spi_slave *slave) +{ + return container_of(slave, struct davinci_spi_slave, slave); +} void spi_init() { diff --git a/drivers/spi/davinci_spi.h b/drivers/spi/davinci_spi.h deleted file mode 100644 index d4612d3..0000000 --- a/drivers/spi/davinci_spi.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ - * - * Register definitions for the DaVinci SPI Controller - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _DAVINCI_SPI_H_ -#define _DAVINCI_SPI_H_ - -struct davinci_spi_regs { - dv_reg gcr0; /* 0x00 */ - dv_reg gcr1; /* 0x04 */ - dv_reg int0; /* 0x08 */ - dv_reg lvl; /* 0x0c */ - dv_reg flg; /* 0x10 */ - dv_reg pc0; /* 0x14 */ - dv_reg pc1; /* 0x18 */ - dv_reg pc2; /* 0x1c */ - dv_reg pc3; /* 0x20 */ - dv_reg pc4; /* 0x24 */ - dv_reg pc5; /* 0x28 */ - dv_reg rsvd[3]; - dv_reg dat0; /* 0x38 */ - dv_reg dat1; /* 0x3c */ - dv_reg buf; /* 0x40 */ - dv_reg emu; /* 0x44 */ - dv_reg delay; /* 0x48 */ - dv_reg def; /* 0x4c */ - dv_reg fmt0; /* 0x50 */ - dv_reg fmt1; /* 0x54 */ - dv_reg fmt2; /* 0x58 */ - dv_reg fmt3; /* 0x5c */ - dv_reg intvec0; /* 0x60 */ - dv_reg intvec1; /* 0x64 */ -}; - -#define BIT(x) (1 << (x)) - -/* SPIGCR0 */ -#define SPIGCR0_SPIENA_MASK 0x1 -#define SPIGCR0_SPIRST_MASK 0x0 - -/* SPIGCR0 */ -#define SPIGCR1_CLKMOD_MASK BIT(1) -#define SPIGCR1_MASTER_MASK BIT(0) -#define SPIGCR1_SPIENA_MASK BIT(24) - -/* SPIPC0 */ -#define SPIPC0_DIFUN_MASK BIT(11) /* SIMO */ -#define SPIPC0_DOFUN_MASK BIT(10) /* SOMI */ -#define SPIPC0_CLKFUN_MASK BIT(9) /* CLK */ -#define SPIPC0_EN0FUN_MASK BIT(0) - -/* SPIFMT0 */ -#define SPIFMT_SHIFTDIR_SHIFT 20 -#define SPIFMT_POLARITY_SHIFT 17 -#define SPIFMT_PHASE_SHIFT 16 -#define SPIFMT_PRESCALE_SHIFT 8 - -/* SPIDAT1 */ -#define SPIDAT1_CSHOLD_SHIFT 28 -#define SPIDAT1_CSNR_SHIFT 16 - -/* SPIDELAY */ -#define SPI_C2TDELAY_SHIFT 24 -#define SPI_T2CDELAY_SHIFT 16 - -/* SPIBUF */ -#define SPIBUF_RXEMPTY_MASK BIT(31) -#define SPIBUF_TXFULL_MASK BIT(29) - -/* SPIDEF */ -#define SPIDEF_CSDEF0_MASK BIT(0) - -#define SPI0_BUS 0 -#define SPI0_BASE CONFIG_SYS_SPI_BASE -/* - * Define default SPI0_NUM_CS as 1 for existing platforms that uses this - * driver. Platform can configure number of CS using CONFIG_SYS_SPI0_NUM_CS - * if more than one CS is supported and by defining CONFIG_SYS_SPI0. - */ -#ifndef CONFIG_SYS_SPI0 -#define SPI0_NUM_CS 1 -#else -#define SPI0_NUM_CS CONFIG_SYS_SPI0_NUM_CS -#endif - -/* - * define CONFIG_SYS_SPI1 when platform has spi-1 device (bus #1) and - * CONFIG_SYS_SPI1_NUM_CS defines number of CS on this bus - */ -#ifdef CONFIG_SYS_SPI1 -#define SPI1_BUS 1 -#define SPI1_NUM_CS CONFIG_SYS_SPI1_NUM_CS -#define SPI1_BASE CONFIG_SYS_SPI1_BASE -#endif - -/* - * define CONFIG_SYS_SPI2 when platform has spi-2 device (bus #2) and - * CONFIG_SYS_SPI2_NUM_CS defines number of CS on this bus - */ -#ifdef CONFIG_SYS_SPI2 -#define SPI2_BUS 2 -#define SPI2_NUM_CS CONFIG_SYS_SPI2_NUM_CS -#define SPI2_BASE CONFIG_SYS_SPI2_BASE -#endif - -struct davinci_spi_slave { - struct spi_slave slave; - struct davinci_spi_regs *regs; - unsigned int freq; -}; - -static inline struct davinci_spi_slave *to_davinci_spi(struct spi_slave *slave) -{ - return container_of(slave, struct davinci_spi_slave, slave); -} - -#endif /* _DAVINCI_SPI_H_ */ -- cgit v0.10.2 From ff6e31d3a108ea2f9448597f29c1c3bde48a057b Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 00:51:29 +0530 Subject: spi: davinci_spi: Driver cleanup Arrange driver code in more readable format[1] for easy accessing and readable. [1] http://patchwork.ozlabs.org/patch/265683/ Signed-off-by: Jagan Teki Cc: Rex Chang Cc: Murali Karicheri diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c index e0ecf99..0a036cc 100644 --- a/drivers/spi/davinci_spi.c +++ b/drivers/spi/davinci_spi.c @@ -8,39 +8,13 @@ * * SPDX-License-Identifier: GPL-2.0+ */ + #include #include #include #include #include -struct davinci_spi_regs { - dv_reg gcr0; /* 0x00 */ - dv_reg gcr1; /* 0x04 */ - dv_reg int0; /* 0x08 */ - dv_reg lvl; /* 0x0c */ - dv_reg flg; /* 0x10 */ - dv_reg pc0; /* 0x14 */ - dv_reg pc1; /* 0x18 */ - dv_reg pc2; /* 0x1c */ - dv_reg pc3; /* 0x20 */ - dv_reg pc4; /* 0x24 */ - dv_reg pc5; /* 0x28 */ - dv_reg rsvd[3]; - dv_reg dat0; /* 0x38 */ - dv_reg dat1; /* 0x3c */ - dv_reg buf; /* 0x40 */ - dv_reg emu; /* 0x44 */ - dv_reg delay; /* 0x48 */ - dv_reg def; /* 0x4c */ - dv_reg fmt0; /* 0x50 */ - dv_reg fmt1; /* 0x54 */ - dv_reg fmt2; /* 0x58 */ - dv_reg fmt3; /* 0x5c */ - dv_reg intvec0; /* 0x60 */ - dv_reg intvec1; /* 0x64 */ -}; - #define BIT(x) (1 << (x)) /* SPIGCR0 */ @@ -112,6 +86,35 @@ struct davinci_spi_regs { #define SPI2_BASE CONFIG_SYS_SPI2_BASE #endif +/* davinci spi register set */ +struct davinci_spi_regs { + dv_reg gcr0; /* 0x00 */ + dv_reg gcr1; /* 0x04 */ + dv_reg int0; /* 0x08 */ + dv_reg lvl; /* 0x0c */ + dv_reg flg; /* 0x10 */ + dv_reg pc0; /* 0x14 */ + dv_reg pc1; /* 0x18 */ + dv_reg pc2; /* 0x1c */ + dv_reg pc3; /* 0x20 */ + dv_reg pc4; /* 0x24 */ + dv_reg pc5; /* 0x28 */ + dv_reg rsvd[3]; + dv_reg dat0; /* 0x38 */ + dv_reg dat1; /* 0x3c */ + dv_reg buf; /* 0x40 */ + dv_reg emu; /* 0x44 */ + dv_reg delay; /* 0x48 */ + dv_reg def; /* 0x4c */ + dv_reg fmt0; /* 0x50 */ + dv_reg fmt1; /* 0x54 */ + dv_reg fmt2; /* 0x58 */ + dv_reg fmt3; /* 0x5c */ + dv_reg intvec0; /* 0x60 */ + dv_reg intvec1; /* 0x64 */ +}; + +/* davinci spi slave */ struct davinci_spi_slave { struct spi_slave slave; struct davinci_spi_regs *regs; @@ -123,111 +126,6 @@ static inline struct davinci_spi_slave *to_davinci_spi(struct spi_slave *slave) return container_of(slave, struct davinci_spi_slave, slave); } -void spi_init() -{ - /* do nothing */ -} - -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode) -{ - struct davinci_spi_slave *ds; - - if (!spi_cs_is_valid(bus, cs)) - return NULL; - - ds = spi_alloc_slave(struct davinci_spi_slave, bus, cs); - if (!ds) - return NULL; - - switch (bus) { - case SPI0_BUS: - ds->regs = (struct davinci_spi_regs *)SPI0_BASE; - break; -#ifdef CONFIG_SYS_SPI1 - case SPI1_BUS: - ds->regs = (struct davinci_spi_regs *)SPI1_BASE; - break; -#endif -#ifdef CONFIG_SYS_SPI2 - case SPI2_BUS: - ds->regs = (struct davinci_spi_regs *)SPI2_BASE; - break; -#endif - default: /* Invalid bus number */ - return NULL; - } - - ds->freq = max_hz; - - return &ds->slave; -} - -void spi_free_slave(struct spi_slave *slave) -{ - struct davinci_spi_slave *ds = to_davinci_spi(slave); - - free(ds); -} - -int spi_claim_bus(struct spi_slave *slave) -{ - struct davinci_spi_slave *ds = to_davinci_spi(slave); - unsigned int scalar; - - /* Enable the SPI hardware */ - writel(SPIGCR0_SPIRST_MASK, &ds->regs->gcr0); - udelay(1000); - writel(SPIGCR0_SPIENA_MASK, &ds->regs->gcr0); - - /* Set master mode, powered up and not activated */ - writel(SPIGCR1_MASTER_MASK | SPIGCR1_CLKMOD_MASK, &ds->regs->gcr1); - - /* CS, CLK, SIMO and SOMI are functional pins */ - writel(((1 << slave->cs) | SPIPC0_CLKFUN_MASK | - SPIPC0_DOFUN_MASK | SPIPC0_DIFUN_MASK), &ds->regs->pc0); - - /* setup format */ - scalar = ((CONFIG_SYS_SPI_CLK / ds->freq) - 1) & 0xFF; - - /* - * Use following format: - * character length = 8, - * clock signal delayed by half clk cycle, - * clock low in idle state - Mode 0, - * MSB shifted out first - */ - writel(8 | (scalar << SPIFMT_PRESCALE_SHIFT) | - (1 << SPIFMT_PHASE_SHIFT), &ds->regs->fmt0); - - /* - * Including a minor delay. No science here. Should be good even with - * no delay - */ - writel((50 << SPI_C2TDELAY_SHIFT) | - (50 << SPI_T2CDELAY_SHIFT), &ds->regs->delay); - - /* default chip select register */ - writel(SPIDEF_CSDEF0_MASK, &ds->regs->def); - - /* no interrupts */ - writel(0, &ds->regs->int0); - writel(0, &ds->regs->lvl); - - /* enable SPI */ - writel((readl(&ds->regs->gcr1) | SPIGCR1_SPIENA_MASK), &ds->regs->gcr1); - - return 0; -} - -void spi_release_bus(struct spi_slave *slave) -{ - struct davinci_spi_slave *ds = to_davinci_spi(slave); - - /* Disable the SPI hardware */ - writel(SPIGCR0_SPIRST_MASK, &ds->regs->gcr0); -} - /* * This functions needs to act like a macro to avoid pipeline reloads in the * loops below. Use always_inline. This gains us about 160KiB/s and the bloat @@ -343,6 +241,149 @@ static int davinci_spi_read_write(struct spi_slave *slave, unsigned int len, } #endif +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + int ret = 0; + + switch (bus) { + case SPI0_BUS: + if (cs < SPI0_NUM_CS) + ret = 1; + break; +#ifdef CONFIG_SYS_SPI1 + case SPI1_BUS: + if (cs < SPI1_NUM_CS) + ret = 1; + break; +#endif +#ifdef CONFIG_SYS_SPI2 + case SPI2_BUS: + if (cs < SPI2_NUM_CS) + ret = 1; + break; +#endif + default: + /* Invalid bus number. Do nothing */ + break; + } + return ret; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + /* do nothing */ +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + /* do nothing */ +} + +void spi_init(void) +{ + /* do nothing */ +} + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + struct davinci_spi_slave *ds; + + if (!spi_cs_is_valid(bus, cs)) + return NULL; + + ds = spi_alloc_slave(struct davinci_spi_slave, bus, cs); + if (!ds) + return NULL; + + switch (bus) { + case SPI0_BUS: + ds->regs = (struct davinci_spi_regs *)SPI0_BASE; + break; +#ifdef CONFIG_SYS_SPI1 + case SPI1_BUS: + ds->regs = (struct davinci_spi_regs *)SPI1_BASE; + break; +#endif +#ifdef CONFIG_SYS_SPI2 + case SPI2_BUS: + ds->regs = (struct davinci_spi_regs *)SPI2_BASE; + break; +#endif + default: /* Invalid bus number */ + return NULL; + } + + ds->freq = max_hz; + + return &ds->slave; +} + +void spi_free_slave(struct spi_slave *slave) +{ + struct davinci_spi_slave *ds = to_davinci_spi(slave); + + free(ds); +} + +int spi_claim_bus(struct spi_slave *slave) +{ + struct davinci_spi_slave *ds = to_davinci_spi(slave); + unsigned int scalar; + + /* Enable the SPI hardware */ + writel(SPIGCR0_SPIRST_MASK, &ds->regs->gcr0); + udelay(1000); + writel(SPIGCR0_SPIENA_MASK, &ds->regs->gcr0); + + /* Set master mode, powered up and not activated */ + writel(SPIGCR1_MASTER_MASK | SPIGCR1_CLKMOD_MASK, &ds->regs->gcr1); + + /* CS, CLK, SIMO and SOMI are functional pins */ + writel(((1 << slave->cs) | SPIPC0_CLKFUN_MASK | + SPIPC0_DOFUN_MASK | SPIPC0_DIFUN_MASK), &ds->regs->pc0); + + /* setup format */ + scalar = ((CONFIG_SYS_SPI_CLK / ds->freq) - 1) & 0xFF; + + /* + * Use following format: + * character length = 8, + * clock signal delayed by half clk cycle, + * clock low in idle state - Mode 0, + * MSB shifted out first + */ + writel(8 | (scalar << SPIFMT_PRESCALE_SHIFT) | + (1 << SPIFMT_PHASE_SHIFT), &ds->regs->fmt0); + + /* + * Including a minor delay. No science here. Should be good even with + * no delay + */ + writel((50 << SPI_C2TDELAY_SHIFT) | + (50 << SPI_T2CDELAY_SHIFT), &ds->regs->delay); + + /* default chip select register */ + writel(SPIDEF_CSDEF0_MASK, &ds->regs->def); + + /* no interrupts */ + writel(0, &ds->regs->int0); + writel(0, &ds->regs->lvl); + + /* enable SPI */ + writel((readl(&ds->regs->gcr1) | SPIGCR1_SPIENA_MASK), &ds->regs->gcr1); + + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ + struct davinci_spi_slave *ds = to_davinci_spi(slave); + + /* Disable the SPI hardware */ + writel(SPIGCR0_SPIRST_MASK, &ds->regs->gcr0); +} + int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, void *din, unsigned long flags) { @@ -386,41 +427,3 @@ out: } return 0; } - -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - int ret = 0; - - switch (bus) { - case SPI0_BUS: - if (cs < SPI0_NUM_CS) - ret = 1; - break; -#ifdef CONFIG_SYS_SPI1 - case SPI1_BUS: - if (cs < SPI1_NUM_CS) - ret = 1; - break; -#endif -#ifdef CONFIG_SYS_SPI2 - case SPI2_BUS: - if (cs < SPI2_NUM_CS) - ret = 1; - break; -#endif - default: - /* Invalid bus number. Do nothing */ - break; - } - return ret; -} - -void spi_cs_activate(struct spi_slave *slave) -{ - /* do nothing */ -} - -void spi_cs_deactivate(struct spi_slave *slave) -{ - /* do nothing */ -} -- cgit v0.10.2 From 5d69df3541c3c1a40ed71ff250b9c98bf2b9f582 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 00:51:30 +0530 Subject: spi/sf: Minor cleanups - Adjust tab spaces - Add comments Signed-off-by: Jagan Teki diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h index 81eea8c..9fb5557 100644 --- a/drivers/mtd/spi/sf_internal.h +++ b/drivers/mtd/spi/sf_internal.h @@ -31,9 +31,9 @@ enum spi_read_cmds { }; /* Normal - Extended - Full command set */ -#define RD_NORM (ARRAY_SLOW | ARRAY_FAST) -#define RD_EXTN (RD_NORM | DUAL_OUTPUT_FAST | DUAL_IO_FAST) -#define RD_FULL (RD_EXTN | QUAD_OUTPUT_FAST | QUAD_IO_FAST) +#define RD_NORM (ARRAY_SLOW | ARRAY_FAST) +#define RD_EXTN (RD_NORM | DUAL_OUTPUT_FAST | DUAL_IO_FAST) +#define RD_FULL (RD_EXTN | QUAD_OUTPUT_FAST | QUAD_IO_FAST) /* sf param flags */ enum { @@ -67,12 +67,12 @@ enum { #define CMD_WRITE_STATUS 0x01 #define CMD_PAGE_PROGRAM 0x02 #define CMD_WRITE_DISABLE 0x04 -#define CMD_READ_STATUS 0x05 +#define CMD_READ_STATUS 0x05 #define CMD_QUAD_PAGE_PROGRAM 0x32 #define CMD_READ_STATUS1 0x35 #define CMD_WRITE_ENABLE 0x06 -#define CMD_READ_CONFIG 0x35 -#define CMD_FLAG_STATUS 0x70 +#define CMD_READ_CONFIG 0x35 +#define CMD_FLAG_STATUS 0x70 /* Read commands */ #define CMD_READ_ARRAY_SLOW 0x03 @@ -99,13 +99,13 @@ enum { /* Flash timeout values */ #define SPI_FLASH_PROG_TIMEOUT (2 * CONFIG_SYS_HZ) -#define SPI_FLASH_PAGE_ERASE_TIMEOUT (5 * CONFIG_SYS_HZ) +#define SPI_FLASH_PAGE_ERASE_TIMEOUT (5 * CONFIG_SYS_HZ) #define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CONFIG_SYS_HZ) /* SST specific */ #ifdef CONFIG_SPI_FLASH_SST # define CMD_SST_BP 0x02 /* Byte Program */ -# define CMD_SST_AAI_WP 0xAD /* Auto Address Incr Word Program */ +# define CMD_SST_AAI_WP 0xAD /* Auto Address Incr Word Program */ int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len, const void *buf); @@ -121,7 +121,7 @@ int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len, * @ext_jedec: Device ext_jedec ID * @sector_size: Isn't necessarily a sector size from vendor, * the size listed here is what works with CMD_ERASE_64K - * @nr_sectors: No.of sectors on this device + * @nr_sectors: No.of sectors on this device * @e_rd_cmd: Enum list for read commands * @flags: Important param, for flash specific behaviour */ diff --git a/include/spi.h b/include/spi.h index f4b93e6..1836236 100644 --- a/include/spi.h +++ b/include/spi.h @@ -54,7 +54,7 @@ /* Header byte that marks the start of the message */ #define SPI_PREAMBLE_END_BYTE 0xec -#define SPI_DEFAULT_WORDLEN 8 +#define SPI_DEFAULT_WORDLEN 8 #ifdef CONFIG_DM_SPI /* TODO(sjg@chromium.org): Remove this and use max_hz from struct spi_slave */ diff --git a/include/spi_flash.h b/include/spi_flash.h index f2814ef..3b2d555 100644 --- a/include/spi_flash.h +++ b/include/spi_flash.h @@ -37,13 +37,15 @@ struct spi_slave; * struct spi_flash - SPI flash structure * * @spi: SPI slave + * @dev: SPI flash device + * @flags: Indication of spi flash flags * @name: Name of SPI flash - * @dual_flash: Indicates dual flash memories - dual stacked, parallel + * @dual_flash: Indicates dual flash memories - dual stacked, parallel * @shift: Flash shift useful in dual parallel * @size: Total flash size * @page_size: Write (page) size * @sector_size: Sector size - * @erase_size: Erase size + * @erase_size: Erase size * @bank_read_cmd: Bank read cmd * @bank_write_cmd: Bank write cmd * @bank_curr: Current flash bank @@ -51,8 +53,8 @@ struct spi_slave; * @erase_cmd: Erase cmd 4K, 32K, 64K * @read_cmd: Read cmd - Array Fast, Extn read and quad read. * @write_cmd: Write cmd - page and quad program. - * @dummy_byte: Dummy cycles for read operation. - * @memory_map: Address of read-only SPI flash access + * @dummy_byte: Dummy cycles for read operation. + * @memory_map: Address of read-only SPI flash access * @read: Flash read ops: Read len bytes at offset into buf * Supported cmds: Fast Array Read * @write: Flash write ops: Write len bytes from buf into offset -- cgit v0.10.2 From b1c82da266f534813558b3a8e5d53f9055c5872a Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 00:51:31 +0530 Subject: dm: spi: zynq_spi: Convert to driver model This converts the zynq spi driver to use the driver model. Minimal functional changes like using meaningful name on structure members wrt mainlined dm spi drivers. - input_hz -> frequency - req_hz -> freq - base -> regs Signed-off-by: Jagan Teki Acked-by: Simon Glass Cc: Michal Simek Cc: Siva Durga Prasad Paladugu Tested-by: Jagan Teki diff --git a/drivers/spi/zynq_spi.c b/drivers/spi/zynq_spi.c index e9129da..50fb1aa 100644 --- a/drivers/spi/zynq_spi.c +++ b/drivers/spi/zynq_spi.c @@ -1,5 +1,6 @@ /* * (C) Copyright 2013 Inc. + * (C) Copyright 2015 Jagan Teki * * Xilinx Zynq PS SPI controller driver (master mode only) * @@ -8,6 +9,8 @@ #include #include +#include +#include #include #include #include @@ -44,180 +47,141 @@ struct zynq_spi_regs { u32 rxdr; /* 0x20 */ }; -/* zynq spi slave */ -struct zynq_spi_slave { - struct spi_slave slave; - struct zynq_spi_regs *base; - u8 mode; - u8 fifo_depth; + +/* zynq spi platform data */ +struct zynq_spi_platdata { + struct zynq_spi_regs *regs; + u32 frequency; /* input frequency */ u32 speed_hz; - u32 input_hz; - u32 req_hz; }; -static inline struct zynq_spi_slave *to_zynq_spi_slave(struct spi_slave *slave) -{ - return container_of(slave, struct zynq_spi_slave, slave); -} +/* zynq spi priv */ +struct zynq_spi_priv { + struct zynq_spi_regs *regs; + u8 mode; + u8 fifo_depth; + u32 freq; /* required frequency */ +}; -static inline struct zynq_spi_regs *get_zynq_spi_base(int dev) +static inline struct zynq_spi_regs *get_zynq_spi_regs(struct udevice *bus) { - if (dev) + if (bus->seq) return (struct zynq_spi_regs *)ZYNQ_SPI_BASEADDR1; else return (struct zynq_spi_regs *)ZYNQ_SPI_BASEADDR0; } -static void zynq_spi_init_hw(struct zynq_spi_slave *zslave) +static int zynq_spi_ofdata_to_platdata(struct udevice *bus) { + struct zynq_spi_platdata *plat = bus->platdata; + + plat->regs = get_zynq_spi_regs(bus); + plat->frequency = 166666700; + plat->speed_hz = plat->frequency / 2; + + return 0; +} + +static void zynq_spi_init_hw(struct zynq_spi_priv *priv) +{ + struct zynq_spi_regs *regs = priv->regs; u32 confr; /* Disable SPI */ - writel(~ZYNQ_SPI_ENR_SPI_EN_MASK, &zslave->base->enr); + writel(~ZYNQ_SPI_ENR_SPI_EN_MASK, ®s->enr); /* Disable Interrupts */ - writel(ZYNQ_SPI_IXR_ALL_MASK, &zslave->base->idr); + writel(ZYNQ_SPI_IXR_ALL_MASK, ®s->idr); /* Clear RX FIFO */ - while (readl(&zslave->base->isr) & + while (readl(®s->isr) & ZYNQ_SPI_IXR_RXNEMPTY_MASK) - readl(&zslave->base->rxdr); + readl(®s->rxdr); /* Clear Interrupts */ - writel(ZYNQ_SPI_IXR_ALL_MASK, &zslave->base->isr); + writel(ZYNQ_SPI_IXR_ALL_MASK, ®s->isr); /* Manual slave select and Auto start */ confr = ZYNQ_SPI_CR_MCS_MASK | ZYNQ_SPI_CR_CS_MASK | ZYNQ_SPI_CR_MSTREN_MASK; confr &= ~ZYNQ_SPI_CR_MSA_MASK; - writel(confr, &zslave->base->cr); + writel(confr, ®s->cr); /* Enable SPI */ - writel(ZYNQ_SPI_ENR_SPI_EN_MASK, &zslave->base->enr); + writel(ZYNQ_SPI_ENR_SPI_EN_MASK, ®s->enr); } -int spi_cs_is_valid(unsigned int bus, unsigned int cs) +static int zynq_spi_probe(struct udevice *bus) { - /* 2 bus with 3 chipselect */ - return bus < 2 && cs < 3; + struct zynq_spi_platdata *plat = dev_get_platdata(bus); + struct zynq_spi_priv *priv = dev_get_priv(bus); + + priv->regs = plat->regs; + priv->fifo_depth = ZYNQ_SPI_FIFO_DEPTH; + + /* init the zynq spi hw */ + zynq_spi_init_hw(priv); + + return 0; } -void spi_cs_activate(struct spi_slave *slave) +static void spi_cs_activate(struct udevice *dev, uint cs) { - struct zynq_spi_slave *zslave = to_zynq_spi_slave(slave); + struct udevice *bus = dev->parent; + struct zynq_spi_priv *priv = dev_get_priv(bus); + struct zynq_spi_regs *regs = priv->regs; u32 cr; - debug("spi_cs_activate: 0x%08x\n", (u32)slave); - - clrbits_le32(&zslave->base->cr, ZYNQ_SPI_CR_CS_MASK); - cr = readl(&zslave->base->cr); + clrbits_le32(®s->cr, ZYNQ_SPI_CR_CS_MASK); + cr = readl(®s->cr); /* * CS cal logic: CS[13:10] * xxx0 - cs0 * xx01 - cs1 * x011 - cs2 */ - cr |= (~(0x1 << slave->cs) << 10) & ZYNQ_SPI_CR_CS_MASK; - writel(cr, &zslave->base->cr); + cr |= (~(0x1 << cs) << 10) & ZYNQ_SPI_CR_CS_MASK; + writel(cr, ®s->cr); } -void spi_cs_deactivate(struct spi_slave *slave) +static void spi_cs_deactivate(struct udevice *dev) { - struct zynq_spi_slave *zslave = to_zynq_spi_slave(slave); - - debug("spi_cs_deactivate: 0x%08x\n", (u32)slave); + struct udevice *bus = dev->parent; + struct zynq_spi_priv *priv = dev_get_priv(bus); + struct zynq_spi_regs *regs = priv->regs; - setbits_le32(&zslave->base->cr, ZYNQ_SPI_CR_CS_MASK); + setbits_le32(®s->cr, ZYNQ_SPI_CR_CS_MASK); } -void spi_init() +static int zynq_spi_claim_bus(struct udevice *dev) { - /* nothing to do */ -} + struct udevice *bus = dev->parent; + struct zynq_spi_priv *priv = dev_get_priv(bus); + struct zynq_spi_regs *regs = priv->regs; -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode) -{ - struct zynq_spi_slave *zslave; + writel(ZYNQ_SPI_ENR_SPI_EN_MASK, ®s->enr); - if (!spi_cs_is_valid(bus, cs)) - return NULL; - - zslave = spi_alloc_slave(struct zynq_spi_slave, bus, cs); - if (!zslave) { - printf("SPI_error: Fail to allocate zynq_spi_slave\n"); - return NULL; - } - - zslave->base = get_zynq_spi_base(bus); - zslave->mode = mode; - zslave->fifo_depth = ZYNQ_SPI_FIFO_DEPTH; - zslave->input_hz = 166666700; - zslave->speed_hz = zslave->input_hz / 2; - zslave->req_hz = max_hz; - - /* init the zynq spi hw */ - zynq_spi_init_hw(zslave); - - return &zslave->slave; -} - -void spi_free_slave(struct spi_slave *slave) -{ - struct zynq_spi_slave *zslave = to_zynq_spi_slave(slave); - - debug("spi_free_slave: 0x%08x\n", (u32)slave); - free(zslave); + return 0; } -int spi_claim_bus(struct spi_slave *slave) +static int zynq_spi_release_bus(struct udevice *dev) { - struct zynq_spi_slave *zslave = to_zynq_spi_slave(slave); - u32 confr = 0; - u8 baud_rate_val = 0; - - writel(~ZYNQ_SPI_ENR_SPI_EN_MASK, &zslave->base->enr); + struct udevice *bus = dev->parent; + struct zynq_spi_priv *priv = dev_get_priv(bus); + struct zynq_spi_regs *regs = priv->regs; - /* Set the SPI Clock phase and polarities */ - confr = readl(&zslave->base->cr); - confr &= ~(ZYNQ_SPI_CR_CPHA_MASK | ZYNQ_SPI_CR_CPOL_MASK); - if (zslave->mode & SPI_CPHA) - confr |= ZYNQ_SPI_CR_CPHA_MASK; - if (zslave->mode & SPI_CPOL) - confr |= ZYNQ_SPI_CR_CPOL_MASK; - - /* Set the clock frequency */ - if (zslave->req_hz == 0) { - /* Set baudrate x8, if the req_hz is 0 */ - baud_rate_val = 0x2; - } else if (zslave->speed_hz != zslave->req_hz) { - while ((baud_rate_val < 8) && - ((zslave->input_hz / - (2 << baud_rate_val)) > zslave->req_hz)) - baud_rate_val++; - zslave->speed_hz = zslave->req_hz / (2 << baud_rate_val); - } - confr &= ~ZYNQ_SPI_CR_BRD_MASK; - confr |= (baud_rate_val << 3); - writel(confr, &zslave->base->cr); - - writel(ZYNQ_SPI_ENR_SPI_EN_MASK, &zslave->base->enr); + writel(~ZYNQ_SPI_ENR_SPI_EN_MASK, ®s->enr); return 0; } -void spi_release_bus(struct spi_slave *slave) +static int zynq_spi_xfer(struct udevice *dev, unsigned int bitlen, + const void *dout, void *din, unsigned long flags) { - struct zynq_spi_slave *zslave = to_zynq_spi_slave(slave); - - debug("spi_release_bus: 0x%08x\n", (u32)slave); - writel(~ZYNQ_SPI_ENR_SPI_EN_MASK, &zslave->base->enr); -} - -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, - void *din, unsigned long flags) -{ - struct zynq_spi_slave *zslave = to_zynq_spi_slave(slave); + struct udevice *bus = dev->parent; + struct zynq_spi_priv *priv = dev_get_priv(bus); + struct zynq_spi_regs *regs = priv->regs; + struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); u32 len = bitlen / 8; u32 tx_len = len, rx_len = len, tx_tvl; const u8 *tx_buf = dout; @@ -225,7 +189,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, u32 ts, status; debug("spi_xfer: bus:%i cs:%i bitlen:%i len:%i flags:%lx\n", - slave->bus, slave->cs, bitlen, len, flags); + bus->seq, slave_plat->cs, bitlen, len, flags); if (bitlen % 8) { debug("spi_xfer: Non byte aligned SPI transfer\n"); @@ -233,45 +197,126 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, } if (flags & SPI_XFER_BEGIN) - spi_cs_activate(slave); + spi_cs_activate(dev, slave_plat->cs); while (rx_len > 0) { /* Write the data into TX FIFO - tx threshold is fifo_depth */ tx_tvl = 0; - while ((tx_tvl < zslave->fifo_depth) && tx_len) { + while ((tx_tvl < priv->fifo_depth) && tx_len) { if (tx_buf) buf = *tx_buf++; else buf = 0; - writel(buf, &zslave->base->txdr); + writel(buf, ®s->txdr); tx_len--; tx_tvl++; } /* Check TX FIFO completion */ ts = get_timer(0); - status = readl(&zslave->base->isr); + status = readl(®s->isr); while (!(status & ZYNQ_SPI_IXR_TXOW_MASK)) { if (get_timer(ts) > CONFIG_SYS_ZYNQ_SPI_WAIT) { printf("spi_xfer: Timeout! TX FIFO not full\n"); return -1; } - status = readl(&zslave->base->isr); + status = readl(®s->isr); } /* Read the data from RX FIFO */ - status = readl(&zslave->base->isr); + status = readl(®s->isr); while (status & ZYNQ_SPI_IXR_RXNEMPTY_MASK) { - buf = readl(&zslave->base->rxdr); + buf = readl(®s->rxdr); if (rx_buf) *rx_buf++ = buf; - status = readl(&zslave->base->isr); + status = readl(®s->isr); rx_len--; } } if (flags & SPI_XFER_END) - spi_cs_deactivate(slave); + spi_cs_deactivate(dev); + + return 0; +} + +static int zynq_spi_set_speed(struct udevice *bus, uint speed) +{ + struct zynq_spi_platdata *plat = bus->platdata; + struct zynq_spi_priv *priv = dev_get_priv(bus); + struct zynq_spi_regs *regs = priv->regs; + uint32_t confr; + u8 baud_rate_val = 0; + + if (speed > plat->frequency) + speed = plat->frequency; + + /* Set the clock frequency */ + confr = readl(®s->cr); + if (speed == 0) { + /* Set baudrate x8, if the freq is 0 */ + baud_rate_val = 0x2; + } else if (plat->speed_hz != speed) { + while ((baud_rate_val < 8) && + ((plat->frequency / + (2 << baud_rate_val)) > speed)) + baud_rate_val++; + plat->speed_hz = speed / (2 << baud_rate_val); + } + confr &= ~ZYNQ_SPI_CR_BRD_MASK; + confr |= (baud_rate_val << 3); + + writel(confr, ®s->cr); + priv->freq = speed; + + debug("zynq_spi_set_speed: regs=%p, mode=%d\n", priv->regs, priv->freq); + + return 0; +} + +static int zynq_spi_set_mode(struct udevice *bus, uint mode) +{ + struct zynq_spi_priv *priv = dev_get_priv(bus); + struct zynq_spi_regs *regs = priv->regs; + uint32_t confr; + + /* Set the SPI Clock phase and polarities */ + confr = readl(®s->cr); + confr &= ~(ZYNQ_SPI_CR_CPHA_MASK | ZYNQ_SPI_CR_CPOL_MASK); + + if (priv->mode & SPI_CPHA) + confr |= ZYNQ_SPI_CR_CPHA_MASK; + if (priv->mode & SPI_CPOL) + confr |= ZYNQ_SPI_CR_CPOL_MASK; + + writel(confr, ®s->cr); + priv->mode = mode; + + debug("zynq_spi_set_mode: regs=%p, mode=%d\n", priv->regs, priv->mode); return 0; } + +static const struct dm_spi_ops zynq_spi_ops = { + .claim_bus = zynq_spi_claim_bus, + .release_bus = zynq_spi_release_bus, + .xfer = zynq_spi_xfer, + .set_speed = zynq_spi_set_speed, + .set_mode = zynq_spi_set_mode, +}; + +static const struct udevice_id zynq_spi_ids[] = { + { .compatible = "xlnx,zynq-spi" }, + { } +}; + +U_BOOT_DRIVER(zynq_spi) = { + .name = "zynq_spi", + .id = UCLASS_SPI, + .of_match = zynq_spi_ids, + .ops = &zynq_spi_ops, + .ofdata_to_platdata = zynq_spi_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct zynq_spi_platdata), + .priv_auto_alloc_size = sizeof(struct zynq_spi_priv), + .probe = zynq_spi_probe, +}; -- cgit v0.10.2 From 9f7a45020bc30934ed4ba3f0c2e4535248934186 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 00:51:32 +0530 Subject: zynq: Kconfig: Enable dm spi and spi_flash Enabled CONFIG_DM_SPI and CONFIG_DM_SPI_FLASH for zynq soc. Signed-off-by: Jagan Teki Acked-by: Simon Glass Cc: Michal Simek Cc: Siva Durga Prasad Paladugu Tested-by: Jagan Teki diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 0829235..5f026f0 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -671,6 +671,8 @@ config ARCH_ZYNQ select CPU_V7 select SUPPORT_SPL select DM + select DM_SPI + select DM_SPI_FLASH config TARGET_XILINX_ZYNQMP bool "Support Xilinx ZynqMP Platform" -- cgit v0.10.2 From a8a8fc9ceea8430224c8c0ac932a75c029a1e225 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 00:51:33 +0530 Subject: dts: zynq: Add zynq spi controller nodes This patch adds zynq spi controller nodes in zynq-7000.dtsi. Signed-off-by: Jagan Teki Acked-by: Simon Glass Cc: Michal Simek Cc: Siva Durga Prasad Paladugu Tested-by: Jagan Teki diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi index 2d076f1..f66f8dc 100644 --- a/arch/arm/dts/zynq-7000.dtsi +++ b/arch/arm/dts/zynq-7000.dtsi @@ -109,6 +109,30 @@ interrupts = <0 50 4>; }; + spi0: spi@e0006000 { + compatible = "xlnx,zynq-spi"; + reg = <0xe0006000 0x1000>; + status = "disabled"; + interrupt-parent = <&intc>; + interrupts = <0 26 4>; + clocks = <&clkc 25>, <&clkc 34>; + clock-names = "ref_clk", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@e0007000 { + compatible = "xlnx,zynq-spi"; + reg = <0xe0007000 0x1000>; + status = "disabled"; + interrupt-parent = <&intc>; + interrupts = <0 49 4>; + clocks = <&clkc 26>, <&clkc 35>; + clock-names = "ref_clk", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + }; + gem0: ethernet@e000b000 { compatible = "cdns,gem"; reg = <0xe000b000 0x4000>; diff --git a/doc/device-tree-bindings/spi/spi-zynq.txt b/doc/device-tree-bindings/spi/spi-zynq.txt new file mode 100644 index 0000000..a7c2757 --- /dev/null +++ b/doc/device-tree-bindings/spi/spi-zynq.txt @@ -0,0 +1,27 @@ +Zynq SPI controller Device Tree Bindings +---------------------------------------- + +Required properties: +- compatible : Should be "xlnx,spi-zynq". +- reg : Physical base address and size of SPI registers map. +- status : Status will be disabled in dtsi and enabled in required dts. +- interrupt-parent : Must be core interrupt controller. +- interrupts : Property with a value describing the interrupt + number. +- clocks : Clock phandles (see clock bindings for details). +- clock-names : List of input clock names - "ref_clk", "pclk" + (See clock bindings for details). + +Example: + + spi@e0006000 { + compatible = "xlnx,zynq-spi"; + reg = <0xe0006000 0x1000>; + status = "disabled"; + interrupt-parent = <&intc>; + interrupts = <0 26 4>; + clocks = <&clkc 25>, <&clkc 34>; + clock-names = "ref_clk", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + } ; -- cgit v0.10.2 From cdc9dd0750bcff780d54050512206fcf2ad05489 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 00:51:34 +0530 Subject: spi: zynq_spi: Add fdt support in driver Now zynq spi driver platform data is controlled by devicetree, enable the status by saying "okay" on respective board dts to use the devicetree generated platdata. Ex: &spi1 { status = "okay"; }; Signed-off-by: Jagan Teki Acked-by: Simon Glass Cc: Michal Simek Cc: Siva Durga Prasad Paladugu Tested-by: Jagan Teki diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi index f66f8dc..9207159 100644 --- a/arch/arm/dts/zynq-7000.dtsi +++ b/arch/arm/dts/zynq-7000.dtsi @@ -117,6 +117,7 @@ interrupts = <0 26 4>; clocks = <&clkc 25>, <&clkc 34>; clock-names = "ref_clk", "pclk"; + spi-max-frequency = <166666700>; #address-cells = <1>; #size-cells = <0>; }; @@ -129,6 +130,7 @@ interrupts = <0 49 4>; clocks = <&clkc 26>, <&clkc 35>; clock-names = "ref_clk", "pclk"; + spi-max-frequency = <166666700>; #address-cells = <1>; #size-cells = <0>; }; diff --git a/doc/device-tree-bindings/spi/spi-zynq.txt b/doc/device-tree-bindings/spi/spi-zynq.txt index a7c2757..f397a36 100644 --- a/doc/device-tree-bindings/spi/spi-zynq.txt +++ b/doc/device-tree-bindings/spi/spi-zynq.txt @@ -11,6 +11,7 @@ Required properties: - clocks : Clock phandles (see clock bindings for details). - clock-names : List of input clock names - "ref_clk", "pclk" (See clock bindings for details). +- spi-max-frequency : Maximum SPI clocking speed of device in Hz Example: @@ -22,6 +23,7 @@ Example: interrupts = <0 26 4>; clocks = <&clkc 25>, <&clkc 34>; clock-names = "ref_clk", "pclk"; + spi-max-frequency = <166666700>; #address-cells = <1>; #size-cells = <0>; } ; diff --git a/drivers/spi/zynq_spi.c b/drivers/spi/zynq_spi.c index 50fb1aa..c5c3e10 100644 --- a/drivers/spi/zynq_spi.c +++ b/drivers/spi/zynq_spi.c @@ -13,9 +13,12 @@ #include #include #include +#include #include #include +DECLARE_GLOBAL_DATA_PTR; + /* zynq spi register bit masks ZYNQ_SPI___MASK */ #define ZYNQ_SPI_CR_MSA_MASK (1 << 15) /* Manual start enb */ #define ZYNQ_SPI_CR_MCS_MASK (1 << 14) /* Manual chip select */ @@ -63,22 +66,22 @@ struct zynq_spi_priv { u32 freq; /* required frequency */ }; -static inline struct zynq_spi_regs *get_zynq_spi_regs(struct udevice *bus) -{ - if (bus->seq) - return (struct zynq_spi_regs *)ZYNQ_SPI_BASEADDR1; - else - return (struct zynq_spi_regs *)ZYNQ_SPI_BASEADDR0; -} - static int zynq_spi_ofdata_to_platdata(struct udevice *bus) { struct zynq_spi_platdata *plat = bus->platdata; + const void *blob = gd->fdt_blob; + int node = bus->of_offset; + + plat->regs = (struct zynq_spi_regs *)fdtdec_get_addr(blob, node, "reg"); - plat->regs = get_zynq_spi_regs(bus); - plat->frequency = 166666700; + /* FIXME: Use 250MHz as a suitable default */ + plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency", + 250000000); plat->speed_hz = plat->frequency / 2; + debug("zynq_spi_ofdata_to_platdata: regs=%p max-frequency=%d\n", + plat->regs, plat->frequency); + return 0; } -- cgit v0.10.2 From 89cab97e98dab67a489f1bd1be3fa6240b0c0922 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 00:51:35 +0530 Subject: dts: zynq: Enable spi1 for zc770_xm010 board This patch enables spi1 for zynq zc770_xm010 board dts Signed-off-by: Jagan Teki Tested-by: Jagan Teki diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts index 5e661749..bf107e3 100644 --- a/arch/arm/dts/zynq-zc770-xm010.dts +++ b/arch/arm/dts/zynq-zc770-xm010.dts @@ -14,6 +14,7 @@ aliases { serial0 = &uart1; + spi1 = &spi1; }; memory { @@ -21,3 +22,7 @@ reg = <0 0x40000000>; }; }; + +&spi1 { + status = "okay"; +}; -- cgit v0.10.2 From 9505c36ed05b94a11c836b1347fd1e4c1918dd50 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Mon, 29 Jun 2015 13:15:18 +0530 Subject: dm: spi: xilinx_spi: Convert to driver model This converts the xilinx spi driver to use the driver model. Signed-off-by: Jagan Teki Acked-by: Simon Glass Cc: Michal Simek diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c index 650e494..4b0b50f 100644 --- a/drivers/spi/xilinx_spi.c +++ b/drivers/spi/xilinx_spi.c @@ -4,6 +4,7 @@ * Supports 8 bit SPI transfers only, with or w/o FIFO * * Based on bfin_spi.c, by way of altera_spi.c + * Copyright (c) 2015 Jagan Teki * Copyright (c) 2012 Stephan Linz * Copyright (c) 2010 Graeme Smecher * Copyright (c) 2010 Thomas Chou @@ -14,6 +15,8 @@ #include #include +#include +#include #include #include @@ -79,7 +82,7 @@ #endif /* xilinx spi register set */ -struct xilinx_spi_reg { +struct xilinx_spi_regs { u32 __space0__[7]; u32 dgier; /* Device Global Interrupt Enable Register (DGIER) */ u32 ipisr; /* IP Interrupt Status Register (IPISR) */ @@ -97,113 +100,75 @@ struct xilinx_spi_reg { u32 spirfor; /* SPI Receive FIFO Occupancy Register (SPIRFOR) */ }; -/* xilinx spi slave */ -struct xilinx_spi_slave { - struct spi_slave slave; - struct xilinx_spi_reg *regs; +/* xilinx spi priv */ +struct xilinx_spi_priv { + struct xilinx_spi_regs *regs; unsigned int freq; unsigned int mode; }; -static inline struct xilinx_spi_slave *to_xilinx_spi_slave( - struct spi_slave *slave) -{ - return container_of(slave, struct xilinx_spi_slave, slave); -} - static unsigned long xilinx_spi_base_list[] = CONFIG_SYS_XILINX_SPI_LIST; -int spi_cs_is_valid(unsigned int bus, unsigned int cs) +static int xilinx_spi_probe(struct udevice *bus) { - return bus < ARRAY_SIZE(xilinx_spi_base_list) && cs < 32; -} + struct xilinx_spi_priv *priv = dev_get_priv(bus); + struct xilinx_spi_regs *regs = priv->regs; -void spi_cs_activate(struct spi_slave *slave) -{ - struct xilinx_spi_slave *xilspi = to_xilinx_spi_slave(slave); + priv->regs = (struct xilinx_spi_regs *)xilinx_spi_base_list[bus->seq]; - writel(SPISSR_ACT(slave->cs), &xilspi->regs->spissr); -} + writel(SPISSR_RESET_VALUE, ®s->srr); -void spi_cs_deactivate(struct spi_slave *slave) -{ - struct xilinx_spi_slave *xilspi = to_xilinx_spi_slave(slave); - - writel(SPISSR_OFF, &xilspi->regs->spissr); -} - -void spi_init(void) -{ - /* do nothing */ + return 0; } -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode) +static void spi_cs_activate(struct udevice *dev, uint cs) { - struct xilinx_spi_slave *xilspi; + struct udevice *bus = dev_get_parent(dev); + struct xilinx_spi_priv *priv = dev_get_priv(bus); + struct xilinx_spi_regs *regs = priv->regs; - if (!spi_cs_is_valid(bus, cs)) { - printf("XILSPI error: unsupported bus %d / cs %d\n", bus, cs); - return NULL; - } - - xilspi = spi_alloc_slave(struct xilinx_spi_slave, bus, cs); - if (!xilspi) { - printf("XILSPI error: malloc of SPI structure failed\n"); - return NULL; - } - xilspi->regs = (struct xilinx_spi_reg *)xilinx_spi_base_list[bus]; - xilspi->freq = max_hz; - xilspi->mode = mode; - debug("spi_setup_slave: bus:%i cs:%i base:%p mode:%x max_hz:%d\n", - bus, cs, xilspi->regs, xilspi->mode, xilspi->freq); - - writel(SPISSR_RESET_VALUE, &xilspi->regs->srr); - - return &xilspi->slave; + writel(SPISSR_ACT(cs), ®s->spissr); } -void spi_free_slave(struct spi_slave *slave) +static void spi_cs_deactivate(struct udevice *dev) { - struct xilinx_spi_slave *xilspi = to_xilinx_spi_slave(slave); + struct udevice *bus = dev_get_parent(dev); + struct xilinx_spi_priv *priv = dev_get_priv(bus); + struct xilinx_spi_regs *regs = priv->regs; - free(xilspi); + writel(SPISSR_OFF, ®s->spissr); } -int spi_claim_bus(struct spi_slave *slave) +static int xilinx_spi_claim_bus(struct udevice *dev) { - struct xilinx_spi_slave *xilspi = to_xilinx_spi_slave(slave); - u32 spicr; - - debug("spi_claim_bus: bus:%i cs:%i\n", slave->bus, slave->cs); - writel(SPISSR_OFF, &xilspi->regs->spissr); + struct udevice *bus = dev_get_parent(dev); + struct xilinx_spi_priv *priv = dev_get_priv(bus); + struct xilinx_spi_regs *regs = priv->regs; - spicr = XILSPI_SPICR_DFLT_ON; - if (xilspi->mode & SPI_LSB_FIRST) - spicr |= SPICR_LSB_FIRST; - if (xilspi->mode & SPI_CPHA) - spicr |= SPICR_CPHA; - if (xilspi->mode & SPI_CPOL) - spicr |= SPICR_CPOL; - if (xilspi->mode & SPI_LOOP) - spicr |= SPICR_LOOP; + writel(SPISSR_OFF, ®s->spissr); + writel(XILSPI_SPICR_DFLT_ON, ®s->spicr); - writel(spicr, &xilspi->regs->spicr); return 0; } -void spi_release_bus(struct spi_slave *slave) +static int xilinx_spi_release_bus(struct udevice *dev) { - struct xilinx_spi_slave *xilspi = to_xilinx_spi_slave(slave); + struct udevice *bus = dev_get_parent(dev); + struct xilinx_spi_priv *priv = dev_get_priv(bus); + struct xilinx_spi_regs *regs = priv->regs; - debug("spi_release_bus: bus:%i cs:%i\n", slave->bus, slave->cs); - writel(SPISSR_OFF, &xilspi->regs->spissr); - writel(XILSPI_SPICR_DFLT_OFF, &xilspi->regs->spicr); + writel(SPISSR_OFF, ®s->spissr); + writel(XILSPI_SPICR_DFLT_OFF, ®s->spicr); + + return 0; } -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, - void *din, unsigned long flags) +static int xilinx_spi_xfer(struct udevice *dev, unsigned int bitlen, + const void *dout, void *din, unsigned long flags) { - struct xilinx_spi_slave *xilspi = to_xilinx_spi_slave(slave); + struct udevice *bus = dev_get_parent(dev); + struct xilinx_spi_priv *priv = dev_get_priv(bus); + struct xilinx_spi_regs *regs = priv->regs; + struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); /* assume spi core configured to do 8 bit transfers */ unsigned int bytes = bitlen / XILSPI_MAX_XFER_BITS; const unsigned char *txp = dout; @@ -212,7 +177,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, unsigned global_timeout; debug("spi_xfer: bus:%i cs:%i bitlen:%i bytes:%i flags:%lx\n", - slave->bus, slave->cs, bitlen, bytes, flags); + bus->seq, slave_plat->cs, bitlen, bytes, flags); if (bitlen == 0) goto done; @@ -225,8 +190,8 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, } /* empty read buffer */ - while (rxecount && !(readl(&xilspi->regs->spisr) & SPISR_RX_EMPTY)) { - readl(&xilspi->regs->spidrr); + while (rxecount && !(readl(®s->spisr) & SPISR_RX_EMPTY)) { + readl(®s->spidrr); rxecount--; } @@ -236,11 +201,11 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, } if (flags & SPI_XFER_BEGIN) - spi_cs_activate(slave); + spi_cs_activate(dev, slave_plat->cs); /* at least 1usec or greater, leftover 1 */ - global_timeout = xilspi->freq > XILSPI_MAX_XFER_BITS * 1000000 ? 2 : - (XILSPI_MAX_XFER_BITS * 1000000 / xilspi->freq) + 1; + global_timeout = priv->freq > XILSPI_MAX_XFER_BITS * 1000000 ? 2 : + (XILSPI_MAX_XFER_BITS * 1000000 / priv->freq) + 1; while (bytes--) { unsigned timeout = global_timeout; @@ -249,8 +214,8 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, debug("spi_xfer: tx:%x ", d); /* write out and wait for processing (receive data) */ - writel(d & SPIDTR_8BIT_MASK, &xilspi->regs->spidtr); - while (timeout && readl(&xilspi->regs->spisr) + writel(d & SPIDTR_8BIT_MASK, ®s->spidtr); + while (timeout && readl(®s->spisr) & SPISR_RX_EMPTY) { timeout--; udelay(1); @@ -262,7 +227,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, } /* read Rx element and push into data in buffer */ - d = readl(&xilspi->regs->spidrr) & SPIDRR_8BIT_MASK; + d = readl(®s->spidrr) & SPIDRR_8BIT_MASK; if (rxp) *rxp++ = d; debug("spi_xfer: rx:%x\n", d); @@ -270,7 +235,66 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, done: if (flags & SPI_XFER_END) - spi_cs_deactivate(slave); + spi_cs_deactivate(dev); return 0; } + +static int xilinx_spi_set_speed(struct udevice *bus, uint speed) +{ + struct xilinx_spi_priv *priv = dev_get_priv(bus); + + priv->freq = speed; + + debug("xilinx_spi_set_speed: regs=%p, mode=%d\n", priv->regs, + priv->freq); + + return 0; +} + +static int xilinx_spi_set_mode(struct udevice *bus, uint mode) +{ + struct xilinx_spi_priv *priv = dev_get_priv(bus); + struct xilinx_spi_regs *regs = priv->regs; + uint32_t spicr; + + spicr = readl(®s->spicr); + if (priv->mode & SPI_LSB_FIRST) + spicr |= SPICR_LSB_FIRST; + if (priv->mode & SPI_CPHA) + spicr |= SPICR_CPHA; + if (priv->mode & SPI_CPOL) + spicr |= SPICR_CPOL; + if (priv->mode & SPI_LOOP) + spicr |= SPICR_LOOP; + + writel(spicr, ®s->spicr); + priv->mode = mode; + + debug("xilinx_spi_set_mode: regs=%p, mode=%d\n", priv->regs, + priv->mode); + + return 0; +} + +static const struct dm_spi_ops xilinx_spi_ops = { + .claim_bus = xilinx_spi_claim_bus, + .release_bus = xilinx_spi_release_bus, + .xfer = xilinx_spi_xfer, + .set_speed = xilinx_spi_set_speed, + .set_mode = xilinx_spi_set_mode, +}; + +static const struct udevice_id xilinx_spi_ids[] = { + { .compatible = "xlnx,xilinx-spi" }, + { } +}; + +U_BOOT_DRIVER(xilinx_spi) = { + .name = "xilinx_spi", + .id = UCLASS_SPI, + .of_match = xilinx_spi_ids, + .ops = &xilinx_spi_ops, + .priv_auto_alloc_size = sizeof(struct xilinx_spi_priv), + .probe = xilinx_spi_probe, +}; -- cgit v0.10.2 From 5f24d123c868c8f2900c7c3f8aa7efc5e6ccc6be Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 00:51:37 +0530 Subject: spi: xilinx_spi: Add asm/io.h include file This patch includes asm/io.h for readl and writel calls. build errors: drivers/spi/xilinx_spi.c: In function 'xilinx_spi_probe': drivers/spi/xilinx_spi.c:119:2: warning: implicit declaration of function 'writel' [-Wimplicit-function-declaration] drivers/spi/xilinx_spi.c: In function 'xilinx_spi_xfer': drivers/spi/xilinx_spi.c:193:2: warning: implicit declaration of function 'readl' [-Wimplicit-function-declaration] Signed-off-by: Jagan Teki Cc: Michal Simek diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c index 4b0b50f..6c21acd 100644 --- a/drivers/spi/xilinx_spi.c +++ b/drivers/spi/xilinx_spi.c @@ -19,6 +19,7 @@ #include #include #include +#include /* * [0]: http://www.xilinx.com/support/documentation -- cgit v0.10.2 From df30a425bbec7b849959f7dc7386e6db798dead6 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 00:51:38 +0530 Subject: spi: Kconfig: Add Zynq SPI controller entry Add Zynq SPI controller Kconfig entry. Signed-off-by: Jagan Teki Reviewed-by: Simon Glass Cc: Marek Vasut Cc: Michal Simek Cc: Siva Durga Prasad Paladugu diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 357a335..fbff707 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -51,3 +51,11 @@ config CADENCE_QSPI Enable the Cadence Quad-SPI (QSPI) driver. This driver can be used to access the SPI NOR flash on platforms embedding this Cadence IP core. + +config ZYNQ_SPI + bool "Zynq SPI driver" + depends on DM_SPI && (ARCH_ZYNQ || TARGET_XILINX_ZYNQMP) + help + Enable the Zynq SPI driver. This driver can be used to + access the SPI NOR flash on platforms embedding this Zynq + SPI IP core. -- cgit v0.10.2 From 55c4c44d411c17ba4ea3e16b9ff0b9721ea0d2cc Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Mon, 29 Jun 2015 14:16:30 +0530 Subject: defconfig: Add CONFIG_OF_CONTROL in zynq_picozed Enable FDT support for zynq_picozed board. Signed-off-by: Jagan Teki diff --git a/configs/zynq_picozed_defconfig b/configs/zynq_picozed_defconfig index af77a9d..76a76e0 100644 --- a/configs/zynq_picozed_defconfig +++ b/configs/zynq_picozed_defconfig @@ -6,3 +6,4 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set +CONFIG_OF_CONTROL=y -- cgit v0.10.2 From d065cfd9fd67adfd35f62ccf95654278f11c446b Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Mon, 29 Jun 2015 14:17:32 +0530 Subject: zynq: defconfig: Move CONFIG_OF_* to Kconfig This commit moves: - CONFIG_OF_CONTROL - SPL_DISABLE_OF_CONTROL from zynq_*_defconfig files into arch/arm/Kconfig "config ARCH_ZYNQ" Signed-off-by: Jagan Teki Cc: Michal Simek Cc: Siva Durga Prasad Paladugu Cc: Masahiro Yamada diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5f026f0..192d9cf 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -670,6 +670,8 @@ config ARCH_ZYNQ bool "Xilinx Zynq Platform" select CPU_V7 select SUPPORT_SPL + select OF_CONTROL + select SPL_DISABLE_OF_CONTROL select DM select DM_SPI select DM_SPI_FLASH diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig index 533cdb5..c878924 100644 --- a/configs/zynq_microzed_defconfig +++ b/configs/zynq_microzed_defconfig @@ -10,5 +10,3 @@ CONFIG_FIT_SIGNATURE=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_OF_CONTROL=y -CONFIG_SPL_DISABLE_OF_CONTROL=y diff --git a/configs/zynq_picozed_defconfig b/configs/zynq_picozed_defconfig index 76a76e0..af77a9d 100644 --- a/configs/zynq_picozed_defconfig +++ b/configs/zynq_picozed_defconfig @@ -6,4 +6,3 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_OF_CONTROL=y diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig index 2e40508..5dde452 100644 --- a/configs/zynq_zc702_defconfig +++ b/configs/zynq_zc702_defconfig @@ -10,4 +10,3 @@ CONFIG_FIT_SIGNATURE=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_OF_CONTROL=y diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig index 7c3713e..0f96d16 100644 --- a/configs/zynq_zc706_defconfig +++ b/configs/zynq_zc706_defconfig @@ -10,4 +10,3 @@ CONFIG_FIT_SIGNATURE=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_OF_CONTROL=y diff --git a/configs/zynq_zc70x_defconfig b/configs/zynq_zc70x_defconfig index 41c04bb..525c538 100644 --- a/configs/zynq_zc70x_defconfig +++ b/configs/zynq_zc70x_defconfig @@ -10,5 +10,3 @@ CONFIG_FIT_SIGNATURE=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_OF_CONTROL=y -CONFIG_SPL_DISABLE_OF_CONTROL=y diff --git a/configs/zynq_zc770_xm010_defconfig b/configs/zynq_zc770_xm010_defconfig index 73b5854..f1fc283 100644 --- a/configs/zynq_zc770_xm010_defconfig +++ b/configs/zynq_zc770_xm010_defconfig @@ -11,6 +11,4 @@ CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM010" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_OF_CONTROL=y -CONFIG_SPL_DISABLE_OF_CONTROL=y CONFIG_SPI_FLASH=y diff --git a/configs/zynq_zc770_xm012_defconfig b/configs/zynq_zc770_xm012_defconfig index 0d5c77e..73ed13d 100644 --- a/configs/zynq_zc770_xm012_defconfig +++ b/configs/zynq_zc770_xm012_defconfig @@ -9,5 +9,3 @@ CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM012" # CONFIG_CMD_SETEXPR is not set -CONFIG_OF_CONTROL=y -CONFIG_SPL_DISABLE_OF_CONTROL=y diff --git a/configs/zynq_zc770_xm013_defconfig b/configs/zynq_zc770_xm013_defconfig index 8d320a1..211a41d 100644 --- a/configs/zynq_zc770_xm013_defconfig +++ b/configs/zynq_zc770_xm013_defconfig @@ -11,5 +11,3 @@ CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM013" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_OF_CONTROL=y -CONFIG_SPL_DISABLE_OF_CONTROL=y diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig index 9f37849..f3c63f9 100644 --- a/configs/zynq_zed_defconfig +++ b/configs/zynq_zed_defconfig @@ -10,5 +10,3 @@ CONFIG_FIT_SIGNATURE=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_OF_CONTROL=y -CONFIG_SPL_DISABLE_OF_CONTROL=y diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig index e25573b..0c6117d 100644 --- a/configs/zynq_zybo_defconfig +++ b/configs/zynq_zybo_defconfig @@ -10,5 +10,3 @@ CONFIG_FIT_SIGNATURE=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set -CONFIG_OF_CONTROL=y -CONFIG_SPL_DISABLE_OF_CONTROL=y -- cgit v0.10.2 From 6812484a40bf18ec8e0021278613caf6a0c46bd7 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 22:04:55 +0530 Subject: sf: dataflash: Rename to CONFIG_SPI_FLASH_DATAFLASH Rename CONFIG_SF_DATAFLASH into CONFIG_SPI_FLASH_DATAFLASH as it follows the naming convention same as remaining configs. Signed-off-by: Jagan Teki diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile index ed46648..ff48b25 100644 --- a/drivers/mtd/spi/Makefile +++ b/drivers/mtd/spi/Makefile @@ -15,9 +15,9 @@ endif #ifndef CONFIG_DM_SPI obj-$(CONFIG_SPI_FLASH) += sf_probe.o #endif -obj-$(CONFIG_SF_DATAFLASH) += sf_dataflash.o obj-$(CONFIG_CMD_SF) += sf.o obj-$(CONFIG_SPI_FLASH) += sf_ops.o sf_params.o +obj-$(CONFIG_SPI_FLASH_DATAFLASH) += sf_dataflash.o obj-$(CONFIG_SPI_FLASH_MTD) += sf_mtd.o obj-$(CONFIG_SPI_FLASH_SANDBOX) += sandbox.o obj-$(CONFIG_SPI_M95XXX) += eeprom_m95xxx.o diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 46c609a..8a5a707 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -423,7 +423,7 @@ unsigned long get_board_ddr_clk(void); #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI) #define CONFIG_CMD_SF #define CONFIG_DM_SPI_FLASH -#define CONFIG_SF_DATAFLASH +#define CONFIG_SPI_FLASH_DATAFLASH #endif #endif -- cgit v0.10.2 From a128197b815cbef81549434c3591108618ecc7ba Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 03:24:53 +0530 Subject: README: Add CONFIG_SPI_FLASH_DATAFLASH description This patch adds CONFIG_SPI_FLASH_DATAFLASH descrition on README file for more readble for users. Signed-off-by: Jagan Teki diff --git a/README b/README index 168d824..c49af74 100644 --- a/README +++ b/README @@ -3099,6 +3099,11 @@ CBFS (Coreboot Filesystem) support is needed for subsystems like UBI which can only operate on top of the MTD layer. + CONFIG_SPI_FLASH_DATAFLASH SPI based Dataflash + + Define this option to access AT45xxx Dataflash chips support + using spi flash interface. + - SystemACE Support: CONFIG_SYSTEMACE -- cgit v0.10.2 From 810fd696728794f3d5da8b76b61c104038c7121a Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 22:39:36 +0530 Subject: sf: Add Kconfig menu entry Added Kconfig menu ... endmenu enties for spi flash suppor Signed-off-by: Jagan Teki diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig index 40a7981..aa3468b 100644 --- a/drivers/mtd/spi/Kconfig +++ b/drivers/mtd/spi/Kconfig @@ -1,3 +1,5 @@ +menu "SPI Flash Support" + config SPI_FLASH bool "Enable SPI Flash support" help @@ -31,3 +33,5 @@ config SPI_FLASH_SANDBOX bus (see CONFIG_SANDBOX_SPI) and SPI traffic will be routed to this device. Typically the contents of the emulated SPI flash device is stored in a file on the host filesystem. + +endmenu # menu "SPI Flash Support" -- cgit v0.10.2 From f39eb75b228f48c8ab569b4d41342a8b7331c075 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 03:47:53 +0530 Subject: common: Add CMD_SF Kconfig entry Added Kconfig entry for CMD_SF. Signed-off-by: Jagan Teki diff --git a/common/Kconfig b/common/Kconfig index 2976cd7..40cd69e 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -311,6 +311,11 @@ config CMD_NAND help NAND support. +config CMD_SF + bool "sf" + help + SPI Flash support + config CMD_SPI bool "sspi" help -- cgit v0.10.2 From 2ce7e2b6fc929fb204a49d7d1391b3d147c138f9 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Mon, 29 Jun 2015 00:59:36 +0530 Subject: sf: Kconfig: Update SPI_FLASH entry Updated SPI_FLASH entry on Kconfig with depends on and along with config help description. Signed-off-by: Jagan Teki diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig index aa3468b..a8789a5 100644 --- a/drivers/mtd/spi/Kconfig +++ b/drivers/mtd/spi/Kconfig @@ -1,14 +1,5 @@ menu "SPI Flash Support" -config SPI_FLASH - bool "Enable SPI Flash support" - help - Enable the legacy SPI flash support. This will include basic - standard support for things like probing, read / write, and - erasing through the MTD layer. - - If unsure, say N - config DM_SPI_FLASH bool "Enable Driver Model for SPI flash" depends on DM && DM_SPI @@ -34,4 +25,13 @@ config SPI_FLASH_SANDBOX device. Typically the contents of the emulated SPI flash device is stored in a file on the host filesystem. +config SPI_FLASH + bool "Legacy SPI Flash Interface support" + help + Enable the legacy SPI flash support. This will include basic + standard support for things like probing, read / write, and + erasing through cmd_sf interface. + + If unsure, say N + endmenu # menu "SPI Flash Support" -- cgit v0.10.2 From 7678dd93ec270d623ee05230004f42226f03c052 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 22:42:35 +0530 Subject: sf: Kconfig: Add SPI_FLASH_MTD entry Added SPI_FLASH_MTD entry on Kconfig with help description. Signed-off-by: Jagan Teki Acked-by: Daniel Schwierzeck Cc: Heiko Schocher diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig index a8789a5..80fe93e 100644 --- a/drivers/mtd/spi/Kconfig +++ b/drivers/mtd/spi/Kconfig @@ -34,4 +34,16 @@ config SPI_FLASH If unsure, say N +config SPI_FLASH_MTD + bool "SPI Flash MTD support" + depends on SPI_FLASH + help + Enable the MTD support for spi flash layer, this adapter is for + translating mtd_read/mtd_write commands into spi_flash_read/write + commands. It is not intended to use it within sf_cmd or the SPI + flash subsystem. Such an adapter is needed for subsystems like + UBI which can only operate on top of the MTD layer. + + If unsure, say N + endmenu # menu "SPI Flash Support" -- cgit v0.10.2 From cd9accdcd9ab2f421047990ddae43f83cc43ca17 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Wed, 1 Jul 2015 21:22:19 +0530 Subject: sf: Kconfig: Add SPI_FLASH_DATAFLASH entry Added SPI_FLASH_DATAFLASH entry on Kconfig with help description. data flash driver comes with good decription, hence moved the same on to kconfig help decription. Signed-off-by: Jagan Teki Reviewed-by: Simon Glass Cc: Haikun Wang diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig index 80fe93e..a4160fd 100644 --- a/drivers/mtd/spi/Kconfig +++ b/drivers/mtd/spi/Kconfig @@ -34,6 +34,21 @@ config SPI_FLASH If unsure, say N +config SPI_FLASH_DATAFLASH + bool "AT45xxx DataFlash support" + depends on SPI_FLASH && DM_SPI_FLASH + help + Enable the access for SPI-flash-based AT45xxx DataFlash chips. + DataFlash is a kind of SPI flash. Most AT45 chips have two buffers + in each chip, which may be used for double buffered I/O; but this + driver doesn't (yet) use these for any kind of i/o overlap or prefetching. + + Sometimes DataFlash is packaged in MMC-format cards, although the + MMC stack can't (yet?) distinguish between MMC and DataFlash + protocols during enumeration. + + If unsure, say N + config SPI_FLASH_MTD bool "SPI Flash MTD support" depends on SPI_FLASH diff --git a/drivers/mtd/spi/sf_dataflash.c b/drivers/mtd/spi/sf_dataflash.c index d287db8..3111f4f 100644 --- a/drivers/mtd/spi/sf_dataflash.c +++ b/drivers/mtd/spi/sf_dataflash.c @@ -19,16 +19,6 @@ #include "sf_internal.h" -/* - * DataFlash is a kind of SPI flash. Most AT45 chips have two buffers in - * each chip, which may be used for double buffered I/O; but this driver - * doesn't (yet) use these for any kind of i/o overlap or prefetching. - * - * Sometimes DataFlash is packaged in MMC-format cards, although the - * MMC stack can't (yet?) distinguish between MMC and DataFlash - * protocols during enumeration. - */ - /* reads can bypass the buffers */ #define OP_READ_CONTINUOUS 0xE8 #define OP_READ_PAGE 0xD2 -- cgit v0.10.2 From 84875f881e6c992cafa81c0fa4b13da1b1ba857e Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 30 Jun 2015 17:10:22 +0900 Subject: ARM: UniPhier: drop special CONFIG_AUTOBOOT_ settings There is no good reason to use a particular key to stop autobooting. The default allows us to stop the autoboot with any key input. Signed-off-by: Masahiro Yamada diff --git a/configs/ph1_ld4_defconfig b/configs/ph1_ld4_defconfig index 650201a..a71511c 100644 --- a/configs/ph1_ld4_defconfig +++ b/configs/ph1_ld4_defconfig @@ -7,10 +7,6 @@ CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-ld4-ref" CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_HUSH_PARSER=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" -CONFIG_AUTOBOOT_DELAY_STR="d" -CONFIG_AUTOBOOT_STOP_STR=" " # CONFIG_CMD_XIMG is not set # CONFIG_CMD_ENV_EXISTS is not set CONFIG_CMD_NAND=y diff --git a/configs/ph1_pro4_defconfig b/configs/ph1_pro4_defconfig index 7d8d9cc..d02712e 100644 --- a/configs/ph1_pro4_defconfig +++ b/configs/ph1_pro4_defconfig @@ -6,10 +6,6 @@ CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-pro4-ref" CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_HUSH_PARSER=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" -CONFIG_AUTOBOOT_DELAY_STR="d" -CONFIG_AUTOBOOT_STOP_STR=" " # CONFIG_CMD_XIMG is not set # CONFIG_CMD_ENV_EXISTS is not set CONFIG_CMD_NAND=y diff --git a/configs/ph1_sld8_defconfig b/configs/ph1_sld8_defconfig index 90c44ac..ee4cebc 100644 --- a/configs/ph1_sld8_defconfig +++ b/configs/ph1_sld8_defconfig @@ -7,10 +7,6 @@ CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-sld8-ref" CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_HUSH_PARSER=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" -CONFIG_AUTOBOOT_DELAY_STR="d" -CONFIG_AUTOBOOT_STOP_STR=" " # CONFIG_CMD_XIMG is not set # CONFIG_CMD_ENV_EXISTS is not set CONFIG_CMD_NAND=y -- cgit v0.10.2 From edcfaeb8fd4829f8ed248556f9f0d996beabc3ba Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 30 Jun 2015 18:27:00 +0900 Subject: ARM: dts: UniPhier: sync device trees with the Linux kernel This makes code diff much easier. Device trees describe hardware attributes, which are independent of software architecture. It generally makes sense to synchronize them beyond software projects. Signed-off-by: Masahiro Yamada diff --git a/arch/arm/dts/uniphier-ph1-ld4.dtsi b/arch/arm/dts/uniphier-ph1-ld4.dtsi index c200838..c355395 100644 --- a/arch/arm/dts/uniphier-ph1-ld4.dtsi +++ b/arch/arm/dts/uniphier-ph1-ld4.dtsi @@ -1,9 +1,7 @@ /* * Device Tree Source for UniPhier PH1-LD4 SoC * - * Copyright (C) 2014-2015 Panasonic Corporation - * Copyright (C) 2015 Socionext Inc. - * Author: Masahiro Yamada + * Copyright (C) 2014-2015 Masahiro Yamada * * SPDX-License-Identifier: GPL-2.0+ */ @@ -24,11 +22,26 @@ }; }; + clocks { + arm_timer_clk: arm_timer_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; + interrupt-parent = <&intc>; + + extbus: extbus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + }; uart0: serial@54006800 { compatible = "socionext,uniphier-uart"; @@ -94,6 +107,12 @@ status = "disabled"; }; + system-bus-controller-misc@59800000 { + compatible = "socionext,uniphier-system-bus-controller-misc", + "syscon"; + reg = <0x59800000 0x2000>; + }; + usb0: usb@5a800100 { compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; @@ -112,6 +131,28 @@ reg = <0x5a820100 0x100>; }; + timer@60000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x60000200 0x20>; + interrupts = <1 11 0x104>; + clocks = <&arm_timer_clk>; + }; + + timer@60000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x60000600 0x20>; + interrupts = <1 13 0x104>; + clocks = <&arm_timer_clk>; + }; + + intc: interrupt-controller@60001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x60001000 0x1000>, + <0x60000100 0x100>; + }; + nand: nand@68000000 { compatible = "denali,denali-nand-dt"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; diff --git a/arch/arm/dts/uniphier-ph1-pro4.dtsi b/arch/arm/dts/uniphier-ph1-pro4.dtsi index 8195266..5c82df7 100644 --- a/arch/arm/dts/uniphier-ph1-pro4.dtsi +++ b/arch/arm/dts/uniphier-ph1-pro4.dtsi @@ -1,9 +1,7 @@ /* * Device Tree Source for UniPhier PH1-Pro4 SoC * - * Copyright (C) 2014-2015 Panasonic Corporation - * Copyright (C) 2015 Socionext Inc. - * Author: Masahiro Yamada + * Copyright (C) 2014-2015 Masahiro Yamada * * SPDX-License-Identifier: GPL-2.0+ */ @@ -16,6 +14,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "socionext,uniphier-smp"; cpu@0 { device_type = "cpu"; @@ -30,11 +29,26 @@ }; }; + clocks { + arm_timer_clk: arm_timer_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; + interrupt-parent = <&intc>; + + extbus: extbus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + }; uart0: serial@54006800 { compatible = "socionext,uniphier-uart"; @@ -120,6 +134,12 @@ status = "ok"; }; + system-bus-controller-misc@59800000 { + compatible = "socionext,uniphier-system-bus-controller-misc", + "syscon"; + reg = <0x59800000 0x2000>; + }; + usb2: usb@5a800100 { compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; @@ -144,6 +164,28 @@ reg = <0x65c00000 0x100>; }; + timer@60000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x60000200 0x20>; + interrupts = <1 11 0x304>; + clocks = <&arm_timer_clk>; + }; + + timer@60000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x60000600 0x20>; + interrupts = <1 13 0x304>; + clocks = <&arm_timer_clk>; + }; + + intc: interrupt-controller@60001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x60001000 0x1000>, + <0x60000100 0x100>; + }; + nand: nand@68000000 { compatible = "denali,denali-nand-dt"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; diff --git a/arch/arm/dts/uniphier-ph1-sld3.dtsi b/arch/arm/dts/uniphier-ph1-sld3.dtsi index 44b1989..1f93bb9 100644 --- a/arch/arm/dts/uniphier-ph1-sld3.dtsi +++ b/arch/arm/dts/uniphier-ph1-sld3.dtsi @@ -1,9 +1,7 @@ /* * Device Tree Source for UniPhier PH1-sLD3 SoC * - * Copyright (C) 2014-2015 Panasonic Corporation - * Copyright (C) 2015 Socionext Inc. - * Author: Masahiro Yamada + * Copyright (C) 2014-2015 Masahiro Yamada * * SPDX-License-Identifier: GPL-2.0+ */ @@ -16,6 +14,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "socionext,uniphier-smp"; cpu@0 { device_type = "cpu"; @@ -30,11 +29,48 @@ }; }; + clocks { + arm_timer_clk: arm_timer_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; + interrupt-parent = <&intc>; + + extbus: extbus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + }; + + timer@20000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x20000200 0x20>; + interrupts = <1 11 0x304>; + clocks = <&arm_timer_clk>; + }; + + timer@20000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x20000600 0x20>; + interrupts = <1 13 0x304>; + clocks = <&arm_timer_clk>; + }; + + intc: interrupt-controller@20001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x20001000 0x1000>, + <0x20000100 0x100>; + }; uart0: serial@54006800 { compatible = "socionext,uniphier-uart"; @@ -93,6 +129,12 @@ status = "disabled"; }; + system-bus-controller-misc@59800000 { + compatible = "socionext,uniphier-system-bus-controller-misc", + "syscon"; + reg = <0x59800000 0x2000>; + }; + usb0: usb@5a800100 { compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; diff --git a/arch/arm/dts/uniphier-ph1-sld8.dtsi b/arch/arm/dts/uniphier-ph1-sld8.dtsi index d9f61c2..4f291f7 100644 --- a/arch/arm/dts/uniphier-ph1-sld8.dtsi +++ b/arch/arm/dts/uniphier-ph1-sld8.dtsi @@ -1,9 +1,7 @@ /* * Device Tree Source for UniPhier PH1-sLD8 SoC * - * Copyright (C) 2014-2015 Panasonic Corporation - * Copyright (C) 2015 Socionext Inc. - * Author: Masahiro Yamada + * Copyright (C) 2014-2015 Masahiro Yamada * * SPDX-License-Identifier: GPL-2.0+ */ @@ -24,11 +22,26 @@ }; }; + clocks { + arm_timer_clk: arm_timer_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; + interrupt-parent = <&intc>; + + extbus: extbus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + }; uart0: serial@54006800 { compatible = "socionext,uniphier-uart"; @@ -94,6 +107,12 @@ status = "disabled"; }; + system-bus-controller-misc@59800000 { + compatible = "socionext,uniphier-system-bus-controller-misc", + "syscon"; + reg = <0x59800000 0x2000>; + }; + usb0: usb@5a800100 { compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; @@ -112,6 +131,28 @@ reg = <0x5a820100 0x100>; }; + timer@60000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x60000200 0x20>; + interrupts = <1 11 0x104>; + clocks = <&arm_timer_clk>; + }; + + timer@60000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x60000600 0x20>; + interrupts = <1 13 0x104>; + clocks = <&arm_timer_clk>; + }; + + intc: interrupt-controller@60001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x60001000 0x1000>, + <0x60000100 0x100>; + }; + nand: nand@68000000 { compatible = "denali,denali-nand-dt"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; -- cgit v0.10.2 From 13b2ba1a112c94355837d77198f5159f68acab27 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 30 Jun 2015 18:27:01 +0900 Subject: ARM: dts: UniPhier: re-license device tree files under GPLv2+/X11 The current GPL only licensing on the device trees makes it very impractical for other software components licensed under another license. To make it easier to reuse them, the device trees for UniPhier SoCs and boards have already been dual-licensed in Linux. Follow this trend in U-boot too. Signed-off-by: Masahiro Yamada diff --git a/arch/arm/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/dts/uniphier-ph1-ld4-ref.dts index d972c02..25e487a 100644 --- a/arch/arm/dts/uniphier-ph1-ld4-ref.dts +++ b/arch/arm/dts/uniphier-ph1-ld4-ref.dts @@ -5,7 +5,7 @@ * Copyright (C) 2015 Socionext Inc. * Author: Masahiro Yamada * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0+ X11 */ /dts-v1/; diff --git a/arch/arm/dts/uniphier-ph1-ld4.dtsi b/arch/arm/dts/uniphier-ph1-ld4.dtsi index c355395..39d7b24 100644 --- a/arch/arm/dts/uniphier-ph1-ld4.dtsi +++ b/arch/arm/dts/uniphier-ph1-ld4.dtsi @@ -3,7 +3,7 @@ * * Copyright (C) 2014-2015 Masahiro Yamada * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0+ X11 */ /include/ "skeleton.dtsi" diff --git a/arch/arm/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/dts/uniphier-ph1-pro4-ref.dts index f6d03e3..b4b7f61 100644 --- a/arch/arm/dts/uniphier-ph1-pro4-ref.dts +++ b/arch/arm/dts/uniphier-ph1-pro4-ref.dts @@ -5,7 +5,7 @@ * Copyright (C) 2015 Socionext Inc. * Author: Masahiro Yamada * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0+ X11 */ /dts-v1/; diff --git a/arch/arm/dts/uniphier-ph1-pro4.dtsi b/arch/arm/dts/uniphier-ph1-pro4.dtsi index 5c82df7..f06906c 100644 --- a/arch/arm/dts/uniphier-ph1-pro4.dtsi +++ b/arch/arm/dts/uniphier-ph1-pro4.dtsi @@ -3,7 +3,7 @@ * * Copyright (C) 2014-2015 Masahiro Yamada * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0+ X11 */ /include/ "skeleton.dtsi" diff --git a/arch/arm/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/dts/uniphier-ph1-sld3-ref.dts index d9616f6..9dc9296 100644 --- a/arch/arm/dts/uniphier-ph1-sld3-ref.dts +++ b/arch/arm/dts/uniphier-ph1-sld3-ref.dts @@ -5,7 +5,7 @@ * Copyright (C) 2015 Socionext Inc. * Author: Masahiro Yamada * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0+ X11 */ /dts-v1/; diff --git a/arch/arm/dts/uniphier-ph1-sld3.dtsi b/arch/arm/dts/uniphier-ph1-sld3.dtsi index 1f93bb9..2fa42a6 100644 --- a/arch/arm/dts/uniphier-ph1-sld3.dtsi +++ b/arch/arm/dts/uniphier-ph1-sld3.dtsi @@ -3,7 +3,7 @@ * * Copyright (C) 2014-2015 Masahiro Yamada * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0+ X11 */ /include/ "skeleton.dtsi" diff --git a/arch/arm/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/dts/uniphier-ph1-sld8-ref.dts index 69e9bfa..2d1359c 100644 --- a/arch/arm/dts/uniphier-ph1-sld8-ref.dts +++ b/arch/arm/dts/uniphier-ph1-sld8-ref.dts @@ -5,7 +5,7 @@ * Copyright (C) 2015 Socionext Inc. * Author: Masahiro Yamada * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0+ X11 */ /dts-v1/; diff --git a/arch/arm/dts/uniphier-ph1-sld8.dtsi b/arch/arm/dts/uniphier-ph1-sld8.dtsi index 4f291f7..15df50f 100644 --- a/arch/arm/dts/uniphier-ph1-sld8.dtsi +++ b/arch/arm/dts/uniphier-ph1-sld8.dtsi @@ -3,7 +3,7 @@ * * Copyright (C) 2014-2015 Masahiro Yamada * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0+ X11 */ /include/ "skeleton.dtsi" diff --git a/arch/arm/dts/uniphier-ref-daughter.dtsi b/arch/arm/dts/uniphier-ref-daughter.dtsi index aca9f58..84b2206 100644 --- a/arch/arm/dts/uniphier-ref-daughter.dtsi +++ b/arch/arm/dts/uniphier-ref-daughter.dtsi @@ -1,11 +1,9 @@ /* * Device Tree Source for UniPhier Reference Daughter Board * - * Copyright (C) 2014-2015 Panasonic Corporation - * Copyright (C) 2015 Socionext Inc. - * Author: Masahiro Yamada + * Copyright (C) 2014-2015 Masahiro Yamada * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0+ X11 */ &i2c0 { -- cgit v0.10.2 From 8101b98298c4232175d0d7b4c73d94b66b97ef83 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 30 Jun 2015 18:43:45 +0900 Subject: ARM: UniPhier: add IDs for PH1-Pro5, ProXstream2, PH1-LD6b This prepares for new SoCs support. Signed-off-by: Masahiro Yamada diff --git a/arch/arm/mach-uniphier/cpu_info.c b/arch/arm/mach-uniphier/cpu_info.c index c4ba6d2..5d9ed84 100644 --- a/arch/arm/mach-uniphier/cpu_info.c +++ b/arch/arm/mach-uniphier/cpu_info.c @@ -34,6 +34,15 @@ int print_cpuinfo(void) case 0x29: puts("PH1-sLD8 (MN2WS0270)"); break; + case 0x2A: + puts("PH1-Pro5 (MN2WS0300)"); + break; + case 0x2E: + puts("ProXstream2 (MN2WS0310)"); + break; + case 0x2F: + puts("PH1-LD6b (MN2WS0320)"); + break; default: printf("Unknown Processor ID (0x%x)\n", revision); return -1; -- cgit v0.10.2 From de8230535b892d8dee768e40e91a4595d6585155 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 22:35:14 +0530 Subject: spi: Add Kconfig menu entry Added Kconfig menu ... endmenu enties for spi support. Signed-off-by: Jagan Teki diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index fbff707..913951f 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -1,3 +1,5 @@ +menu "SPI Support" + config DM_SPI bool "Enable Driver Model for SPI drivers" depends on DM @@ -59,3 +61,5 @@ config ZYNQ_SPI Enable the Zynq SPI driver. This driver can be used to access the SPI NOR flash on platforms embedding this Zynq SPI IP core. + +endmenu # menu "SPI Support" -- cgit v0.10.2 From 075143d3cfd780efed63ad0f28a299c8bc15379f Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 04:32:43 +0530 Subject: spi: Kconfig: Add XILINX_SPI entry Added XILINX_SPI entry on Kconfig with help description. Signed-off-by: Jagan Teki Cc: Michal Simek diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 913951f..452dd4d 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -54,6 +54,15 @@ config CADENCE_QSPI used to access the SPI NOR flash on platforms embedding this Cadence IP core. +config XILINX_SPI + bool "Xilinx SPI driver" + depends on DM_SPI + help + Enable the Xilinx SPI driver from the Xilinx EDK. This SPI + controller support 8 bit SPI transfers only, with or w/o FIFO. + For more info on Xilinx SPI Register Definitions and Overview + see driver file - drivers/spi/xilinx_spi.c + config ZYNQ_SPI bool "Zynq SPI driver" depends on DM_SPI && (ARCH_ZYNQ || TARGET_XILINX_ZYNQMP) -- cgit v0.10.2 From f924a2090884a33d175f74d905e70c8e713b2abb Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 04:41:11 +0530 Subject: spi: Kconfig: Add TI_QSPI entry Added TI_QSPI entry on Kconfig with help description. Signed-off-by: Jagan Teki Reviewed-by: Tom Rini diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 452dd4d..218657e 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -54,6 +54,12 @@ config CADENCE_QSPI used to access the SPI NOR flash on platforms embedding this Cadence IP core. +config TI_QSPI + bool "TI QSPI driver" + help + Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms. + This driver support spi flash single, quad and memory reads. + config XILINX_SPI bool "Xilinx SPI driver" depends on DM_SPI -- cgit v0.10.2 From 1360004233801aed153c7f58f316912aed062c6e Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 13:51:53 +0530 Subject: spi: Makefile: Use object file alphabetic order Use object files as incresing alphabetic order, so-that it's easy for readability. Signed-off-by: Jagan Teki diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 507c315..ee88aa1 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -15,7 +15,6 @@ obj-y += spi.o obj-$(CONFIG_SOFT_SPI) += soft_spi_legacy.o endif -obj-$(CONFIG_EP93XX_SPI) += ep93xx_spi.o obj-$(CONFIG_ALTERA_SPI) += altera_spi.o obj-$(CONFIG_ARMADA100_SPI) += armada100_spi.o obj-$(CONFIG_ATMEL_DATAFLASH_SPI) += atmel_dataflash_spi.o @@ -27,7 +26,11 @@ obj-$(CONFIG_CF_SPI) += cf_spi.o obj-$(CONFIG_CF_QSPI) += cf_qspi.o obj-$(CONFIG_DAVINCI_SPI) += davinci_spi.o obj-$(CONFIG_DESIGNWARE_SPI) += designware_spi.o +obj-$(CONFIG_EP93XX_SPI) += ep93xx_spi.o obj-$(CONFIG_EXYNOS_SPI) += exynos_spi.o +obj-$(CONFIG_FSL_DSPI) += fsl_dspi.o +obj-$(CONFIG_FSL_ESPI) += fsl_espi.o +obj-$(CONFIG_FSL_QSPI) += fsl_qspi.o obj-$(CONFIG_ICH_SPI) += ich.o obj-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o obj-$(CONFIG_LPC32XX_SSP) += lpc32xx_ssp.o @@ -39,12 +42,9 @@ obj-$(CONFIG_OMAP3_SPI) += omap3_spi.o obj-$(CONFIG_SANDBOX_SPI) += sandbox_spi.o obj-$(CONFIG_SH_SPI) += sh_spi.o obj-$(CONFIG_SH_QSPI) += sh_qspi.o -obj-$(CONFIG_FSL_ESPI) += fsl_espi.o +obj-$(CONFIG_TEGRA114_SPI) += tegra114_spi.o obj-$(CONFIG_TEGRA20_SFLASH) += tegra20_sflash.o obj-$(CONFIG_TEGRA20_SLINK) += tegra20_slink.o -obj-$(CONFIG_TEGRA114_SPI) += tegra114_spi.o obj-$(CONFIG_TI_QSPI) += ti_qspi.o obj-$(CONFIG_XILINX_SPI) += xilinx_spi.o obj-$(CONFIG_ZYNQ_SPI) += zynq_spi.o -obj-$(CONFIG_FSL_QSPI) += fsl_qspi.o -obj-$(CONFIG_FSL_DSPI) += fsl_dspi.o -- cgit v0.10.2 From e4976af8656878c708f9b90278648b39e6d88dc6 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 22:37:00 +0530 Subject: spi: Kconfig: Show dm-spi drivers if DM_SPI set DM supported spi drivers are enbled only when DM_SPI enabled, so added DM_SPI if condition in Kconfig to show thoese only when it enabled. Also re-order the config items as incresing alphabetic order. Signed-off-by: Jagan Teki diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 218657e..7277bbd 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -13,6 +13,22 @@ config DM_SPI typically use driver-private data instead of extending the spi_slave structure. +if DM_SPI + +config CADENCE_QSPI + bool "Cadence QSPI driver" + help + Enable the Cadence Quad-SPI (QSPI) driver. This driver can be + used to access the SPI NOR flash on platforms embedding this + Cadence IP core. + +config DESIGNWARE_SPI + bool "Designware SPI driver" + help + Enable the Designware SPI driver. This driver can be used to + access the SPI NOR flash on platforms embedding this Designware + IP core. + config SANDBOX_SPI bool "Sandbox SPI driver" depends on SANDBOX && DM @@ -36,33 +52,10 @@ config SANDBOX_SPI spi-max-frequency = <40000000>; sandbox,filename = "spi.bin"; }; - }; - -config DESIGNWARE_SPI - bool "Designware SPI driver" - depends on DM_SPI - help - Enable the Designware SPI driver. This driver can be used to - access the SPI NOR flash on platforms embedding this Designware - IP core. - -config CADENCE_QSPI - bool "Cadence QSPI driver" - depends on DM_SPI - help - Enable the Cadence Quad-SPI (QSPI) driver. This driver can be - used to access the SPI NOR flash on platforms embedding this - Cadence IP core. - -config TI_QSPI - bool "TI QSPI driver" - help - Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms. - This driver support spi flash single, quad and memory reads. + }; config XILINX_SPI bool "Xilinx SPI driver" - depends on DM_SPI help Enable the Xilinx SPI driver from the Xilinx EDK. This SPI controller support 8 bit SPI transfers only, with or w/o FIFO. @@ -71,10 +64,18 @@ config XILINX_SPI config ZYNQ_SPI bool "Zynq SPI driver" - depends on DM_SPI && (ARCH_ZYNQ || TARGET_XILINX_ZYNQMP) + depends on ARCH_ZYNQ || TARGET_XILINX_ZYNQMP help Enable the Zynq SPI driver. This driver can be used to access the SPI NOR flash on platforms embedding this Zynq SPI IP core. +endif # if DM_SPI + +config TI_QSPI + bool "TI QSPI driver" + help + Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms. + This driver support spi flash single, quad and memory reads. + endmenu # menu "SPI Support" -- cgit v0.10.2 From 94ea308d758fd0621450c542c2ba46db28ddf2ef Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 14:17:06 +0530 Subject: spi: Kconfig: Add FSL_DSPI entry Added FSL_DSPI entry on Kconfig with help description. Signed-off-by: Jagan Teki Cc: Haikun Wang diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 7277bbd..9c6c5d5 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -29,6 +29,14 @@ config DESIGNWARE_SPI access the SPI NOR flash on platforms embedding this Designware IP core. +config FSL_DSPI + bool "Freescale DSPI driver" + help + Enable the Freescale DSPI driver. This driver can be used to + access the SPI NOR flash and SPI Data flash on platforms embedding + this Freescale DSPI IP core. LS102xA and Colibri VF50/VF61 platforms + use this driver. + config SANDBOX_SPI bool "Sandbox SPI driver" depends on SANDBOX && DM -- cgit v0.10.2 From 3debffa7043ca44c0aa314bea19b60c08bdf5e51 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 15:21:36 +0530 Subject: spi: Kconfig: Add FSL_ESPI entry Added FSL_ESPI entry on Kconfig with help description. Signed-off-by: Jagan Teki Cc: Haikun Wang diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 9c6c5d5..2c0046d 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -80,6 +80,13 @@ config ZYNQ_SPI endif # if DM_SPI +config FSL_ESPI + bool "Freescale eSPI driver" + help + Enable the Freescale eSPI driver. This driver can be used to + access the SPI interface and SPI NOR flash on platforms embedding + this Freescale eSPI IP core. + config TI_QSPI bool "TI QSPI driver" help -- cgit v0.10.2 From 91c22d046c542361fea2e0398772d646a4d75560 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 15:23:07 +0530 Subject: spi: Kconfig: Add FSL_QSPI entry Added FSL_QSPI entry on Kconfig with help description. Signed-off-by: Jagan Teki Cc: Peng Fan Cc: Haikun Wang diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 2c0046d..e4a90e8 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -37,6 +37,13 @@ config FSL_DSPI this Freescale DSPI IP core. LS102xA and Colibri VF50/VF61 platforms use this driver. +config FSL_QSPI + bool "Freescale QSPI driver" + help + Enable the Freescale Quad-SPI (QSPI) driver. This driver can be + used to access the SPI NOR flash on platforms embedding this + Freescale IP core. + config SANDBOX_SPI bool "Sandbox SPI driver" depends on SANDBOX && DM -- cgit v0.10.2 From c354eee8d02eba1e24ff863023ba842f9c91e226 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 15:32:19 +0530 Subject: spi: Kconfig: Add EXYNOS_SPI entry Added EXYNOS_SPI entry on Kconfig with help description. Signed-off-by: Jagan Teki Reviewed-by: Simon Glass diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index e4a90e8..d5e6881 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -29,6 +29,13 @@ config DESIGNWARE_SPI access the SPI NOR flash on platforms embedding this Designware IP core. +config EXYNOS_SPI + bool "Samsung Exynos SPI driver" + help + Enable the Samsung Exynos SPI driver. This driver can be used to + access the SPI NOR flash on platforms embedding this Samsung + Exynos IP core. + config FSL_DSPI bool "Freescale DSPI driver" help -- cgit v0.10.2 From 456360102cf609a8990e3c65911b6631e96c3795 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 15:43:27 +0530 Subject: spi: Kconfig: Add ICH_SPI entry Added ICH_SPI entry on Kconfig with help description. Signed-off-by: Jagan Teki Reviewed-by: Simon Glass Reviewed-by: Bin Meng diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index d5e6881..43f9fac 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -51,6 +51,13 @@ config FSL_QSPI used to access the SPI NOR flash on platforms embedding this Freescale IP core. +config ICH_SPI + bool "Intel ICH SPI driver" + help + Enable the Intel ICH SPI driver. This driver can be used to + access the SPI NOR flash on platforms embedding this Intel + ICH IP core. + config SANDBOX_SPI bool "Sandbox SPI driver" depends on SANDBOX && DM -- cgit v0.10.2 From 5bf9a2d3dd1714068993f66ec2489af333f3e7d1 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 15:57:53 +0530 Subject: spi: Kconfig: Add TEGRA114_SPI entry Added TEGRA114_SPI entry on Kconfig with help description. Signed-off-by: Jagan Teki Reviewed-by: Simon Glass Cc: Tom Warren Cc: Stephen Warren diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 43f9fac..16dce77 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -83,6 +83,16 @@ config SANDBOX_SPI }; }; +config TEGRA114_SPI + bool "nVidia Tegra114 SPI driver" + help + Enable the nVidia Tegra114 SPI driver. This driver can be used to + access the SPI NOR flash on platforms embedding this nVidia Tegra114 + IP core. + + This controller is different than the older SoCs SPI controller and + also register interface get changed with this controller. + config XILINX_SPI bool "Xilinx SPI driver" help -- cgit v0.10.2 From 2f3e6f8cc1449511f6cdb0b2b624084af73669ca Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 16:04:05 +0530 Subject: spi: Kconfig: Add TEGRA20_SFLASH entry Added TEGRA20_SFLASH entry on Kconfig with help description. Signed-off-by: Jagan Teki Reviewed-by: Simon Glass Cc: Tom Warren Cc: Stephen Warren diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 16dce77..8ffb3c4 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -93,6 +93,13 @@ config TEGRA114_SPI This controller is different than the older SoCs SPI controller and also register interface get changed with this controller. +config TEGRA20_SFLASH + bool "nVidia Tegra20 Serial Flash controller driver" + help + Enable the nVidia Tegra20 Serial Flash controller driver. This driver + can be used to access the SPI NOR flash on platforms embedding this + nVidia Tegra20 IP core. + config XILINX_SPI bool "Xilinx SPI driver" help -- cgit v0.10.2 From 4495830c580f4508f9a4244e0eef5ddf406d7d47 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 16:07:54 +0530 Subject: spi: Kconfig: Add TEGRA20_SLINK entry Added TEGRA20_SLINK entry on Kconfig with help description. Signed-off-by: Jagan Teki Reviewed-by: Simon Glass Cc: Tom Warren Cc: Stephen Warren diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 8ffb3c4..c84a7b7 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -100,6 +100,13 @@ config TEGRA20_SFLASH can be used to access the SPI NOR flash on platforms embedding this nVidia Tegra20 IP core. +config TEGRA20_SLINK + bool "nVidia Tegra20/Tegra30 SLINK driver" + help + Enable the nVidia Tegra20/Tegra30 SLINK driver. This driver can + be used to access the SPI NOR flash on platforms embedding this + nVidia Tegra20/Tegra30 IP cores. + config XILINX_SPI bool "Xilinx SPI driver" help -- cgit v0.10.2 From 0c79bde479db48d72d9193b179b79fceb4a38b41 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Mon, 29 Jun 2015 23:46:00 +0530 Subject: README: Remove CONFIG_SPI_FLASH_MTD help text Since the help text is added in drivers/mtd/spi/Kconfig Signed-off-by: Jagan Teki diff --git a/README b/README index c49af74..c9a7785 100644 --- a/README +++ b/README @@ -3090,15 +3090,6 @@ CBFS (Coreboot Filesystem) support memories can be connected with a given cs line. Currently Xilinx Zynq qspi supports these type of connections. - CONFIG_SPI_FLASH_MTD spi-flash MTD layer - - Define this option to use mtd support for spi flash layer, this - adapter is for translating mtd_read/mtd_write commands into - spi_flash_read/spi_flash_write commands. It is not intended to - use it within sf_cmd or the SPI flash subsystem. Such an adapter - is needed for subsystems like UBI which can only operate on top - of the MTD layer. - CONFIG_SPI_FLASH_DATAFLASH SPI based Dataflash Define this option to access AT45xxx Dataflash chips support -- cgit v0.10.2 From 9cb528de4800f350e819000d93bfe836042528a2 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Mon, 29 Jun 2015 22:36:18 +0530 Subject: defconfig: Move CONFIG_SPI_FLASH_BAR from configs This commit moves: - CONFIG_SPI_FLASH_BAR from include/configs/*.h into configs/*_defconfigs Signed-off-by: Jagan Teki diff --git a/configs/alt_defconfig b/configs/alt_defconfig index f4fea7f..d994d78 100644 --- a/configs/alt_defconfig +++ b/configs/alt_defconfig @@ -17,4 +17,5 @@ CONFIG_TARGET_ALT=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_MISC is not set CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_SH_SDHI=y diff --git a/configs/am43xx_evm_defconfig b/configs/am43xx_evm_defconfig index 407d67c..65efa9d 100644 --- a/configs/am43xx_evm_defconfig +++ b/configs/am43xx_evm_defconfig @@ -5,4 +5,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set +CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH=y diff --git a/configs/bg0900_defconfig b/configs/bg0900_defconfig index 8e0fac8..a29ad01 100644 --- a/configs/bg0900_defconfig +++ b/configs/bg0900_defconfig @@ -4,3 +4,4 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig index 1a0e01f..463a7e2 100644 --- a/configs/dra7xx_evm_defconfig +++ b/configs/dra7xx_evm_defconfig @@ -8,3 +8,4 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1" # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y diff --git a/configs/gose_defconfig b/configs/gose_defconfig index bece0aa..72aee1c 100644 --- a/configs/gose_defconfig +++ b/configs/gose_defconfig @@ -17,4 +17,5 @@ CONFIG_TARGET_GOSE=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_MISC is not set CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_SH_SDHI=y diff --git a/configs/koelsch_defconfig b/configs/koelsch_defconfig index 13c8310..df49a71 100644 --- a/configs/koelsch_defconfig +++ b/configs/koelsch_defconfig @@ -17,4 +17,5 @@ CONFIG_TARGET_KOELSCH=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_MISC is not set CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_SH_SDHI=y diff --git a/configs/lager_defconfig b/configs/lager_defconfig index 3805fcb..6b86f00 100644 --- a/configs/lager_defconfig +++ b/configs/lager_defconfig @@ -17,4 +17,5 @@ CONFIG_TARGET_LAGER=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_MISC is not set CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_SH_SDHI=y diff --git a/configs/maxbcm_defconfig b/configs/maxbcm_defconfig index c5b3b67..b0b0d6c 100644 --- a/configs/maxbcm_defconfig +++ b/configs/maxbcm_defconfig @@ -5,3 +5,4 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y diff --git a/configs/mx6sxsabresd_defconfig b/configs/mx6sxsabresd_defconfig index e355ba5..e6e4db5 100644 --- a/configs/mx6sxsabresd_defconfig +++ b/configs/mx6sxsabresd_defconfig @@ -5,3 +5,4 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg,M # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y diff --git a/configs/porter_defconfig b/configs/porter_defconfig index 15f3434..dc8b5ca 100644 --- a/configs/porter_defconfig +++ b/configs/porter_defconfig @@ -17,4 +17,5 @@ CONFIG_TARGET_PORTER=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_MISC is not set CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_SH_SDHI=y diff --git a/configs/silk_defconfig b/configs/silk_defconfig index 20c85fd..e4e4ebc 100644 --- a/configs/silk_defconfig +++ b/configs/silk_defconfig @@ -17,4 +17,5 @@ CONFIG_TARGET_SILK=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_MISC is not set CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y CONFIG_SH_SDHI=y diff --git a/include/configs/alt.h b/include/configs/alt.h index 524da42..6d2c242 100644 --- a/include/configs/alt.h +++ b/include/configs/alt.h @@ -41,7 +41,6 @@ /* FLASH */ #define CONFIG_SPI -#define CONFIG_SPI_FLASH_BAR #define CONFIG_SH_QSPI #define CONFIG_SPI_FLASH_SPANSION #define CONFIG_SPI_FLASH_QUAD diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 466ded7..33e534a 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -204,7 +204,6 @@ #define CONFIG_CMD_SF #define CONFIG_CMD_SPI #define CONFIG_TI_SPI_MMAP -#define CONFIG_SPI_FLASH_BAR #define CONFIG_QSPI_SEL_GPIO 48 #define CONFIG_SF_DEFAULT_SPEED 48000000 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3 diff --git a/include/configs/bg0900.h b/include/configs/bg0900.h index 76c1c6a..c45c8c2 100644 --- a/include/configs/bg0900.h +++ b/include/configs/bg0900.h @@ -49,7 +49,6 @@ /* SPI FLASH */ #ifdef CONFIG_CMD_SF -#define CONFIG_SPI_FLASH_BAR #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_SF_DEFAULT_BUS 2 #define CONFIG_SF_DEFAULT_CS 0 diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 914e1cf..d84427d 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -125,7 +125,6 @@ #define CONFIG_SPI_FLASH_SPANSION #define CONFIG_CMD_SF #define CONFIG_CMD_SPI -#define CONFIG_SPI_FLASH_BAR #define CONFIG_TI_SPI_MMAP #define CONFIG_SF_DEFAULT_SPEED 48000000 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3 diff --git a/include/configs/gose.h b/include/configs/gose.h index f088649..c08e73a 100644 --- a/include/configs/gose.h +++ b/include/configs/gose.h @@ -44,7 +44,6 @@ #define CONFIG_SYS_NO_FLASH #define CONFIG_SPI #define CONFIG_SH_QSPI -#define CONFIG_SPI_FLASH_BAR #define CONFIG_SPI_FLASH_SPANSION /* SH Ether */ diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h index ff948f9..c905cc2 100644 --- a/include/configs/koelsch.h +++ b/include/configs/koelsch.h @@ -44,7 +44,6 @@ #define CONFIG_SYS_NO_FLASH #define CONFIG_SPI #define CONFIG_SH_QSPI -#define CONFIG_SPI_FLASH_BAR #define CONFIG_SPI_FLASH_SPANSION /* SH Ether */ diff --git a/include/configs/lager.h b/include/configs/lager.h index 546863e..1450e8f 100644 --- a/include/configs/lager.h +++ b/include/configs/lager.h @@ -42,7 +42,6 @@ /* SPI */ #define CONFIG_SPI -#define CONFIG_SPI_FLASH_BAR #define CONFIG_SH_QSPI #define CONFIG_SPI_FLASH_SPANSION #define CONFIG_SYS_NO_FLASH diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h index 0839d39..4826044 100644 --- a/include/configs/maxbcm.h +++ b/include/configs/maxbcm.h @@ -43,7 +43,6 @@ #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_SPI_FLASH_SPANSION -#define CONFIG_SPI_FLASH_BAR /* Environment in SPI NOR flash */ #define CONFIG_ENV_IS_IN_SPI_FLASH diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index 19f9e44..2b278a8 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -189,7 +189,6 @@ #ifdef CONFIG_FSL_QSPI #define CONFIG_CMD_SF -#define CONFIG_SPI_FLASH_BAR #define CONFIG_SPI_FLASH_SPANSION #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_SYS_FSL_QSPI_LE diff --git a/include/configs/porter.h b/include/configs/porter.h index 9367349..59b14e9 100644 --- a/include/configs/porter.h +++ b/include/configs/porter.h @@ -42,7 +42,6 @@ /* FLASH */ #define CONFIG_SPI -#define CONFIG_SPI_FLASH_BAR #define CONFIG_SH_QSPI #define CONFIG_SPI_FLASH_SPANSION #define CONFIG_SPI_FLASH_QUAD diff --git a/include/configs/silk.h b/include/configs/silk.h index b105f5a..cd839aa 100644 --- a/include/configs/silk.h +++ b/include/configs/silk.h @@ -42,7 +42,6 @@ /* FLASH */ #define CONFIG_SPI -#define CONFIG_SPI_FLASH_BAR #define CONFIG_SH_QSPI #define CONFIG_SPI_FLASH_SPANSION #define CONFIG_SPI_FLASH_QUAD -- cgit v0.10.2 From 84d31b3b8f2f2134e1534354cba82ca8cb671962 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Mon, 29 Jun 2015 23:32:17 +0530 Subject: sf: Kconfig: Add SPI_FLASH_BAR entry Added SPI_FLASH_BAR entry on Kconfig with help description Signed-off-by: Jagan Teki diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig index a4160fd..4f0c040 100644 --- a/drivers/mtd/spi/Kconfig +++ b/drivers/mtd/spi/Kconfig @@ -34,6 +34,14 @@ config SPI_FLASH If unsure, say N +config SPI_FLASH_BAR + bool "SPI flash Bank/Extended address register support" + depends on SPI_FLASH + help + Enable the SPI flash Bank/Extended address register support. + Bank/Extended address registers are used to access the flash + which has size > 16MiB in 3-byte addressing. + config SPI_FLASH_DATAFLASH bool "AT45xxx DataFlash support" depends on SPI_FLASH && DM_SPI_FLASH -- cgit v0.10.2 From afdfe387cde6c878d99703089f2ffe7612a2c3dd Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Mon, 29 Jun 2015 23:47:40 +0530 Subject: README: Remove CONFIG_SPI_FLASH_BAR help text Since the help text is added in drivers/mtd/spi/Kconfig Signed-off-by: Jagan Teki diff --git a/README b/README index c9a7785..94c5228 100644 --- a/README +++ b/README @@ -3079,11 +3079,6 @@ CBFS (Coreboot Filesystem) support Define this option to include a destructive SPI flash test ('sf test'). - CONFIG_SPI_FLASH_BAR Ban/Extended Addr Reg - - Define this option to use the Bank addr/Extended addr - support on SPI flashes which has size > 16Mbytes. - CONFIG_SF_DUAL_FLASH Dual flash memories Define this option to use dual flash support where two flash -- cgit v0.10.2 From 23cbd16db6551b2d5e7d6dfaa5d75a27bad28f3b Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Mon, 29 Jun 2015 23:48:31 +0530 Subject: README: Remove CONFIG_SPI_FLASH_DATAFLASH help text Since the help text is added in drivers/mtd/spi/Kconfig Signed-off-by: Jagan Teki diff --git a/README b/README index 94c5228..53fc28e 100644 --- a/README +++ b/README @@ -3085,11 +3085,6 @@ CBFS (Coreboot Filesystem) support memories can be connected with a given cs line. Currently Xilinx Zynq qspi supports these type of connections. - CONFIG_SPI_FLASH_DATAFLASH SPI based Dataflash - - Define this option to access AT45xxx Dataflash chips support - using spi flash interface. - - SystemACE Support: CONFIG_SYSTEMACE -- cgit v0.10.2 From 8aa5f1d971df0f668144759991e19b5195606a32 Mon Sep 17 00:00:00 2001 From: Angelo Dureghello Date: Sun, 21 Jun 2015 23:40:46 +0200 Subject: spi: cf_qspi: fix clamp macro type check compilation warnings Fix compilation warnings for redefined 'clamp' macro and non-uniform clamp macro types. Signed-off-by: Angelo Dureghello Reviewed-by: Jagannadh Teki diff --git a/drivers/spi/cf_qspi.c b/drivers/spi/cf_qspi.c index 834c5bd..e57e63e 100644 --- a/drivers/spi/cf_qspi.c +++ b/drivers/spi/cf_qspi.c @@ -19,7 +19,6 @@ DECLARE_GLOBAL_DATA_PTR; -#define clamp(x, low, high) (min(max(low, x), high)) #define to_cf_qspi_slave(s) container_of(s, struct cf_qspi_slave, slave) struct cf_qspi_slave { @@ -120,7 +119,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, dev->qmr = 2u; else /* Get the closest baud rate */ dev->qmr = clamp(((gd->bus_clk >> 2) + max_hz - 1)/max_hz, - 2u, 255u); + 2lu, 255lu); /* Map mode to QMR[CPOL] and QMR[CPHA] */ if (mode & SPI_CPOL) -- cgit v0.10.2 From 6ad8c743001c1114c5921f78c17e6fb43d4b6ca0 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 23 Jun 2015 19:57:23 +0800 Subject: sunxi: hardware-feature-specific function index defines for PORT F UART0 Commit 487b327 ("sunxi: GPIO pin mux hardware-feature-specific function index defines") renamed all GPIO index defines, but missed the PORT F UART0 setup functions. Signed-off-by: Chen-Yu Tsai Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index 0344362..1c26865 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -45,11 +45,11 @@ static int gpio_init(void) sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUNXI_GPIO_INPUT); #endif #if defined(CONFIG_MACH_SUN8I) - sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUN8I_GPF_UART0_TX); - sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUN8I_GPF_UART0_RX); + sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUN8I_GPF_UART0); + sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUN8I_GPF_UART0); #else - sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUNXI_GPF_UART0_TX); - sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF_UART0_RX); + sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUNXI_GPF_UART0); + sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF_UART0); #endif sunxi_gpio_set_pull(SUNXI_GPF(4), 1); #elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)) -- cgit v0.10.2 From dec7c84227339cda4bf6c7d9a411ea189473112d Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 23 Jun 2015 19:57:24 +0800 Subject: sunxi: rsb: Enable R_PIO clock before configuring external pins The original code was configuring the external pins after enabling the R_PIO clock, which meant the configuration never made it to the pin controller the first time in SPL. Why this was working before is uncertain. Maybe the state was left from a previous boot sequence, or RSB just happened to be the default configuration. However with some A33 chips, SPL failed to configure the PMIC. This was seen by me and Maxime on the Sinlinx SinA33 dev board. Reordering the calls fixed this. Signed-off-by: Chen-Yu Tsai Cc: Maxime Ripard Tested-by: Maxime Ripard Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede diff --git a/arch/arm/cpu/armv7/sunxi/rsb.c b/arch/arm/cpu/armv7/sunxi/rsb.c index f115a9c..6fd11f1 100644 --- a/arch/arm/cpu/armv7/sunxi/rsb.c +++ b/arch/arm/cpu/armv7/sunxi/rsb.c @@ -60,11 +60,12 @@ int rsb_init(void) struct sunxi_rsb_reg * const rsb = (struct sunxi_rsb_reg *)SUNXI_RSB_BASE; - rsb_cfg_io(); - /* Enable RSB and PIO clk, and de-assert their resets */ prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_RSB); + /* Setup external pins */ + rsb_cfg_io(); + writel(RSB_CTRL_SOFT_RST, &rsb->ctrl); rsb_set_clk(); -- cgit v0.10.2 From e506889c9690b672a601ac84a31bb8dbc40d7e35 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 23 Jun 2015 19:57:25 +0800 Subject: sunxi: Add support for UART0 in PB pin group on A33 The A33 adds a pinmux function for UART0 in the PB pin group. Signed-off-by: Chen-Yu Tsai Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index 1c26865..5f39aa0 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -64,6 +64,10 @@ static int gpio_init(void) sunxi_gpio_set_cfgpin(SUNXI_GPH(20), SUN6I_GPH_UART0); sunxi_gpio_set_cfgpin(SUNXI_GPH(21), SUN6I_GPH_UART0); sunxi_gpio_set_pull(SUNXI_GPH(21), SUNXI_GPIO_PULL_UP); +#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_A33) + sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN8I_A33_GPB_UART0); + sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_A33_GPB_UART0); + sunxi_gpio_set_pull(SUNXI_GPB(1), SUNXI_GPIO_PULL_UP); #elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN9I) sunxi_gpio_set_cfgpin(SUNXI_GPH(12), SUN9I_GPH_UART0); sunxi_gpio_set_cfgpin(SUNXI_GPH(13), SUN9I_GPH_UART0); diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index 496295d..8e67b3b 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -156,6 +156,7 @@ enum sunxi_gpio_number { #define SUN4I_GPB_UART0 2 #define SUN5I_GPB_UART0 2 #define SUN8I_GPB_UART2 2 +#define SUN8I_A33_GPB_UART0 3 #define SUNXI_GPC_SDC2 3 #define SUN6I_GPC_SDC3 4 -- cgit v0.10.2 From d8656b6297cb8c08f80adbbe717bd06e150fb759 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 23 Jun 2015 19:57:26 +0800 Subject: sunxi: Sync sun8i dts files with the linux kernel Copy over all the latest dts changes from mripard/sunxi/dt-for-4.2. This adds a dts file for Sinlinx SinA33 dev board, and the required changes in the .dtsi files. Signed-off-by: Chen-Yu Tsai Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede diff --git a/arch/arm/dts/sun8i-a23-a33.dtsi b/arch/arm/dts/sun8i-a23-a33.dtsi index faea94e..7abd0ae 100644 --- a/arch/arm/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/dts/sun8i-a23-a33.dtsi @@ -366,6 +366,16 @@ allwinner,pull = ; }; + mmc2_8bit_pins: mmc2_8bit { + allwinner,pins = "PC5", "PC6", "PC8", + "PC9", "PC10", "PC11", + "PC12", "PC13", "PC14", + "PC15"; + allwinner,function = "mmc2"; + allwinner,drive = ; + allwinner,pull = ; + }; + i2c0_pins_a: i2c0@0 { allwinner,pins = "PH2", "PH3"; allwinner,function = "i2c0"; diff --git a/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts new file mode 100644 index 0000000..5788c29 --- /dev/null +++ b/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts @@ -0,0 +1,129 @@ +/* + * Copyright 2015 Chen-Yu Tsai + * + * Chen-Yu Tsai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a33.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include +#include + +/ { + model = "Sinlinx SinA33"; + compatible = "sinlinx,sina33", "allwinner,sun8i-a33"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <191011>; + }; + + button@400 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <391304>; + }; + + button@600 { + label = "Home"; + linux,code = ; + channel = <0>; + voltage = <600000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v0>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&mmc2_8bit_pins { + /* eMMC is missing pull-ups */ + allwinner,pull = ; +}; + +&pio { + mmc0_cd_pin_sina33: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_b>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-a33.dtsi b/arch/arm/dts/sun8i-a33.dtsi index 9b43bc6..85ee080 100644 --- a/arch/arm/dts/sun8i-a33.dtsi +++ b/arch/arm/dts/sun8i-a33.dtsi @@ -86,4 +86,12 @@ compatible = "allwinner,sun8i-a33-pinctrl"; interrupts = , ; + + uart0_pins_b: uart0@1 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "uart0"; + allwinner,drive = ; + allwinner,pull = ; + }; + }; -- cgit v0.10.2 From 4e87398fcc946c076339e8ed9bf1cc576fd42cf7 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 23 Jun 2015 19:57:27 +0800 Subject: sunxi: Add Sinlinx SinA33 defconfig Sinlinx SinA33 is a core/daughter board SDK kit from Sinlinx. It has the A33 SoC, USB host, USB OTG, audio input/output, LCD, camera, SDIO and GPIO headers. Signed-off-by: Chen-Yu Tsai Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 9c735c6..bbca94f 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -128,7 +128,8 @@ dtb-$(CONFIG_MACH_SUN8I_A23) += \ dtb-$(CONFIG_MACH_SUN8I_A33) += \ sun8i-a33-et-q8-v1.6.dtb \ sun8i-a33-ga10h-v1.1.dtb \ - sun8i-a33-ippo-q8h-v1.2-lcd1024x600.dtb + sun8i-a33-ippo-q8h-v1.2-lcd1024x600.dtb \ + sun8i-a33-sinlinx-sina33.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 7a42055..1f12a64 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -162,6 +162,12 @@ M: Siarhei Siamashka S: Maintained F: configs/MSI_Primo81_defconfig +SINLINX SINA33 BOARD +M: Chen-Yu Tsai +S: Maintained +F: configs/Sinlinx_SinA33_defconfig +W: http://linux-sunxi.org/Sinlinx_SinA33 + TZX-Q8-713B7 BOARD M: Paul Kocialkowski S: Maintained diff --git a/configs/Sinlinx_SinA33_defconfig b/configs/Sinlinx_SinA33_defconfig new file mode 100644 index 0000000..e9e62da --- /dev/null +++ b/configs/Sinlinx_SinA33_defconfig @@ -0,0 +1,16 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN8I_A33=y +CONFIG_DRAM_CLK=552 +CONFIG_DRAM_ZQ=15291 +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-sinlinx-sina33" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_DM_ETH=y +CONFIG_DM_SERIAL=y +CONFIG_AXP221_ALDO1_VOLT=3000 +CONFIG_USB=y +CONFIG_DM_USB=y -- cgit v0.10.2 From 1f9e5e228c23831bb8e8896209bb67ebcfaf59a7 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 14 Apr 2015 14:55:24 +0800 Subject: gpio: lpc32xx: Use priv_data instead of platdata The LPC32XX GPIO driver platdata currently contains GPIO state information, which should go into priv_data. Thus rename lpc32xx_gpio_platdata to lpc32xx_gpio_priv and convert to use dev_get_priv() instead. Signed-off-by: Axel Lin Tested-by: Albert ARIBAUD diff --git a/drivers/gpio/lpc32xx_gpio.c b/drivers/gpio/lpc32xx_gpio.c index 96b3125..8a9826e 100644 --- a/drivers/gpio/lpc32xx_gpio.c +++ b/drivers/gpio/lpc32xx_gpio.c @@ -37,7 +37,7 @@ #define LPC32XX_GPIOS 128 -struct lpc32xx_gpio_platdata { +struct lpc32xx_gpio_priv { struct gpio_regs *regs; /* GPIO FUNCTION: SEE WARNING #2 */ signed char function[LPC32XX_GPIOS]; @@ -60,8 +60,8 @@ struct lpc32xx_gpio_platdata { static int lpc32xx_gpio_direction_input(struct udevice *dev, unsigned offset) { int port, mask; - struct lpc32xx_gpio_platdata *gpio_platdata = dev_get_platdata(dev); - struct gpio_regs *regs = gpio_platdata->regs; + struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev); + struct gpio_regs *regs = gpio_priv->regs; port = GPIO_TO_PORT(offset); mask = GPIO_TO_MASK(offset); @@ -83,7 +83,7 @@ static int lpc32xx_gpio_direction_input(struct udevice *dev, unsigned offset) } /* GPIO FUNCTION: SEE WARNING #2 */ - gpio_platdata->function[offset] = GPIOF_INPUT; + gpio_priv->function[offset] = GPIOF_INPUT; return 0; } @@ -95,8 +95,8 @@ static int lpc32xx_gpio_direction_input(struct udevice *dev, unsigned offset) static int lpc32xx_gpio_get_value(struct udevice *dev, unsigned offset) { int port, rank, mask, value; - struct lpc32xx_gpio_platdata *gpio_platdata = dev_get_platdata(dev); - struct gpio_regs *regs = gpio_platdata->regs; + struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev); + struct gpio_regs *regs = gpio_priv->regs; port = GPIO_TO_PORT(offset); @@ -130,8 +130,8 @@ static int lpc32xx_gpio_get_value(struct udevice *dev, unsigned offset) static int gpio_set(struct udevice *dev, unsigned gpio) { int port, mask; - struct lpc32xx_gpio_platdata *gpio_platdata = dev_get_platdata(dev); - struct gpio_regs *regs = gpio_platdata->regs; + struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev); + struct gpio_regs *regs = gpio_priv->regs; port = GPIO_TO_PORT(gpio); mask = GPIO_TO_MASK(gpio); @@ -162,8 +162,8 @@ static int gpio_set(struct udevice *dev, unsigned gpio) static int gpio_clr(struct udevice *dev, unsigned gpio) { int port, mask; - struct lpc32xx_gpio_platdata *gpio_platdata = dev_get_platdata(dev); - struct gpio_regs *regs = gpio_platdata->regs; + struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev); + struct gpio_regs *regs = gpio_priv->regs; port = GPIO_TO_PORT(gpio); mask = GPIO_TO_MASK(gpio); @@ -208,8 +208,8 @@ static int lpc32xx_gpio_direction_output(struct udevice *dev, unsigned offset, int value) { int port, mask; - struct lpc32xx_gpio_platdata *gpio_platdata = dev_get_platdata(dev); - struct gpio_regs *regs = gpio_platdata->regs; + struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev); + struct gpio_regs *regs = gpio_priv->regs; port = GPIO_TO_PORT(offset); mask = GPIO_TO_MASK(offset); @@ -231,7 +231,7 @@ static int lpc32xx_gpio_direction_output(struct udevice *dev, unsigned offset, } /* GPIO FUNCTION: SEE WARNING #2 */ - gpio_platdata->function[offset] = GPIOF_OUTPUT; + gpio_priv->function[offset] = GPIOF_OUTPUT; return lpc32xx_gpio_set_value(dev, offset, value); } @@ -251,8 +251,8 @@ static int lpc32xx_gpio_direction_output(struct udevice *dev, unsigned offset, static int lpc32xx_gpio_get_function(struct udevice *dev, unsigned offset) { - struct lpc32xx_gpio_platdata *gpio_platdata = dev_get_platdata(dev); - return gpio_platdata->function[offset]; + struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev); + return gpio_priv->function[offset]; } static const struct dm_gpio_ops gpio_lpc32xx_ops = { @@ -265,7 +265,7 @@ static const struct dm_gpio_ops gpio_lpc32xx_ops = { static int lpc32xx_gpio_probe(struct udevice *dev) { - struct lpc32xx_gpio_platdata *gpio_platdata = dev_get_platdata(dev); + struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev); struct gpio_dev_priv *uc_priv = dev->uclass_priv; if (dev->of_offset == -1) { @@ -274,12 +274,11 @@ static int lpc32xx_gpio_probe(struct udevice *dev) } /* set base address for GPIO registers */ - gpio_platdata->regs = (struct gpio_regs *)GPIO_BASE; + gpio_priv->regs = (struct gpio_regs *)GPIO_BASE; /* all GPIO functions are unknown until requested */ /* GPIO FUNCTION: SEE WARNING #2 */ - memset(gpio_platdata->function, GPIOF_UNKNOWN, - sizeof(gpio_platdata->function)); + memset(gpio_priv->function, GPIOF_UNKNOWN, sizeof(gpio_priv->function)); return 0; } @@ -289,5 +288,5 @@ U_BOOT_DRIVER(gpio_lpc32xx) = { .id = UCLASS_GPIO, .ops = &gpio_lpc32xx_ops, .probe = lpc32xx_gpio_probe, - .priv_auto_alloc_size = sizeof(struct lpc32xx_gpio_platdata), + .priv_auto_alloc_size = sizeof(struct lpc32xx_gpio_priv), }; -- cgit v0.10.2 From 003b09dad492ebc385b28067b8028a0c0ff9323f Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 8 Apr 2015 14:15:54 +0200 Subject: armv7: better comment in start.S Fix big/small letters in comment. Signed-off-by: Pavel Machek Tested-by: Marek Vasut diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 5ed0f45..1c7e6f0 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -22,10 +22,9 @@ * * Startup Code (reset vector) * - * do important init only if we don't start from memory! - * setup Memory and board specific bits prior to relocation. - * relocate armboot to ram - * setup stack + * Do important init only if we don't start from memory! + * Setup memory and board specific bits prior to relocation. + * Relocate armboot to ram. Setup stack. * *************************************************************************/ -- cgit v0.10.2 From 1251d51ca587431d07fb37fecb86b21db682e250 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Tue, 2 Jun 2015 11:08:20 -0600 Subject: arm: Add ENTRY/ENDPROC to private libgcc functions When CONFIG_SYS_THUMB_BUILD is defined these functions may be called from Thumb code. Add the required ENTRY and ENDPROC bracketing so that BLX is used to call these ARM functions, instead of plain BL, which will fail. Signed-off-by: Simon Glass Reported-by: Pavel Machek diff --git a/arch/arm/lib/_ashldi3.S b/arch/arm/lib/_ashldi3.S index 2c26f84..9c34c21 100644 --- a/arch/arm/lib/_ashldi3.S +++ b/arch/arm/lib/_ashldi3.S @@ -4,6 +4,8 @@ * SPDX-License-Identifier: GPL-2.0+ */ +#include + #ifdef __ARMEB__ #define al r1 #define ah r0 @@ -13,9 +15,8 @@ #endif .globl __ashldi3 -.globl __aeabi_llsl __ashldi3: -__aeabi_llsl: +ENTRY(__aeabi_llsl) subs r3, r2, #32 rsb ip, r2, #32 @@ -24,3 +25,4 @@ __aeabi_llsl: orrmi ah, ah, al, lsr ip mov al, al, lsl r2 mov pc, lr +ENDPROC(__aeabi_llsl) diff --git a/arch/arm/lib/_ashrdi3.S b/arch/arm/lib/_ashrdi3.S index 4d93c8a..c74fd64 100644 --- a/arch/arm/lib/_ashrdi3.S +++ b/arch/arm/lib/_ashrdi3.S @@ -4,6 +4,8 @@ * SPDX-License-Identifier: GPL-2.0+ */ +#include + #ifdef __ARMEB__ #define al r1 #define ah r0 @@ -13,9 +15,8 @@ #endif .globl __ashrdi3 -.globl __aeabi_lasr __ashrdi3: -__aeabi_lasr: +ENTRY(__aeabi_lasr) subs r3, r2, #32 rsb ip, r2, #32 @@ -24,3 +25,4 @@ __aeabi_lasr: orrmi al, al, ah, lsl ip mov ah, ah, asr r2 mov pc, lr +ENDPROC(__aeabi_lasr) diff --git a/arch/arm/lib/_divsi3.S b/arch/arm/lib/_divsi3.S index 6015493..c463c68 100644 --- a/arch/arm/lib/_divsi3.S +++ b/arch/arm/lib/_divsi3.S @@ -1,3 +1,5 @@ +#include + .macro ARM_DIV_BODY dividend, divisor, result, curbit #if __LINUX_ARM_ARCH__ >= 5 @@ -95,9 +97,8 @@ .align 5 .globl __divsi3 -.globl __aeabi_idiv __divsi3: -__aeabi_idiv: +ENTRY(__aeabi_idiv) cmp r1, #0 eor ip, r0, r1 @ save the sign of the result. beq Ldiv0 @@ -139,3 +140,4 @@ Ldiv0: bl __div0 mov r0, #0 @ About as wrong as it could be. ldr pc, [sp], #4 +ENDPROC(__aeabi_idiv) diff --git a/arch/arm/lib/_lshrdi3.S b/arch/arm/lib/_lshrdi3.S index 33296a0..1f9b916 100644 --- a/arch/arm/lib/_lshrdi3.S +++ b/arch/arm/lib/_lshrdi3.S @@ -4,6 +4,8 @@ * SPDX-License-Identifier: GPL-2.0+ */ +#include + #ifdef __ARMEB__ #define al r1 #define ah r0 @@ -13,9 +15,8 @@ #endif .globl __lshrdi3 -.globl __aeabi_llsr __lshrdi3: -__aeabi_llsr: +ENTRY(__aeabi_llsr) subs r3, r2, #32 rsb ip, r2, #32 @@ -24,3 +25,4 @@ __aeabi_llsr: orrmi al, al, ah, lsl ip mov ah, ah, lsr r2 mov pc, lr +ENDPROC(__aeabi_llsr) diff --git a/arch/arm/lib/_modsi3.S b/arch/arm/lib/_modsi3.S index 3d31a55..c5e1c22 100644 --- a/arch/arm/lib/_modsi3.S +++ b/arch/arm/lib/_modsi3.S @@ -1,3 +1,5 @@ +#include + .macro ARM_MOD_BODY dividend, divisor, order, spare #if __LINUX_ARM_ARCH__ >= 5 @@ -69,8 +71,7 @@ .endm .align 5 -.globl __modsi3 -__modsi3: +ENTRY(__modsi3) cmp r1, #0 beq Ldiv0 rsbmi r1, r1, #0 @ loops below use unsigned. @@ -88,7 +89,7 @@ __modsi3: 10: cmp ip, #0 rsbmi r0, r0, #0 mov pc, lr - +ENDPROC(__modsi3) Ldiv0: diff --git a/arch/arm/lib/_udivsi3.S b/arch/arm/lib/_udivsi3.S index 1309802..3b653be 100644 --- a/arch/arm/lib/_udivsi3.S +++ b/arch/arm/lib/_udivsi3.S @@ -1,3 +1,5 @@ +#include + /* # 1 "libgcc1.S" */ @ libgcc1 routines for ARM cpu. @ Division routines, written by Richard Earnshaw, (rearnsha@armltd.co.uk) @@ -72,8 +74,7 @@ Ldiv0: ldmia sp!, {pc} .size __udivsi3 , . - __udivsi3 -.globl __aeabi_uidivmod -__aeabi_uidivmod: +ENTRY(__aeabi_uidivmod) stmfd sp!, {r0, r1, ip, lr} bl __aeabi_uidiv @@ -81,9 +82,9 @@ __aeabi_uidivmod: mul r3, r0, r2 sub r1, r1, r3 mov pc, lr +ENDPROC(__aeabi_uidivmod) -.globl __aeabi_idivmod -__aeabi_idivmod: +ENTRY(__aeabi_idivmod) stmfd sp!, {r0, r1, ip, lr} bl __aeabi_idiv @@ -91,3 +92,4 @@ __aeabi_idivmod: mul r3, r0, r2 sub r1, r1, r3 mov pc, lr +ENDPROC(__aeabi_idivmod) diff --git a/arch/arm/lib/_umodsi3.S b/arch/arm/lib/_umodsi3.S index 8465ef0..b166737 100644 --- a/arch/arm/lib/_umodsi3.S +++ b/arch/arm/lib/_umodsi3.S @@ -1,3 +1,5 @@ +#include + /* # 1 "libgcc1.S" */ @ libgcc1 routines for ARM cpu. @ Division routines, written by Richard Earnshaw, (rearnsha@armltd.co.uk) @@ -11,10 +13,9 @@ curbit .req r3 /* lr .req r14 */ /* pc .req r15 */ .text - .globl __umodsi3 .type __umodsi3 ,function .align 0 - __umodsi3 : + ENTRY(__umodsi3) cmp divisor, #0 beq Ldiv0 mov curbit, #1 @@ -86,3 +87,4 @@ Ldiv0: /* # 456 "libgcc1.S" */ /* # 500 "libgcc1.S" */ /* # 580 "libgcc1.S" */ +ENDPROC(__umodsi3) -- cgit v0.10.2 From b69969be5d509c50165d6b21ac6fca469732e049 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Tue, 2 Jun 2015 11:08:21 -0600 Subject: Revert "break build if it would produce broken binary" The root cause of this problem should now be fixed. This reverts commit a6a4c542d316b3401f0840ac5378743191bca851. Signed-off-by: Simon Glass Acked-by: Pavel Machek Tested-by: Pavel Machek diff --git a/arch/arm/include/asm/u-boot.h b/arch/arm/include/asm/u-boot.h index ae4c21b..43cc494 100644 --- a/arch/arm/include/asm/u-boot.h +++ b/arch/arm/include/asm/u-boot.h @@ -49,8 +49,4 @@ typedef struct bd_info { #define IH_ARCH_DEFAULT IH_ARCH_ARM64 #endif -#if defined(CONFIG_USE_PRIVATE_LIBGCC) && defined(CONFIG_SYS_THUMB_BUILD) -#error Thumb build does not work with private libgcc. -#endif - #endif /* _U_BOOT_H_ */ -- cgit v0.10.2 From e05412f5ec27a07df92efa5cad47acd1c7fbea08 Mon Sep 17 00:00:00 2001 From: Siva Durga Prasad Paladugu Date: Fri, 29 May 2015 09:54:37 +0200 Subject: arm: dcc: Add uart dcc support for armv8 Added UART DCC support for armv8 Signed-off-by: Siva Durga Prasad Paladugu Signed-off-by: Michal Simek Reviewed-by: Tom Rini diff --git a/drivers/serial/arm_dcc.c b/drivers/serial/arm_dcc.c index e777737..df7eb05 100644 --- a/drivers/serial/arm_dcc.c +++ b/drivers/serial/arm_dcc.c @@ -61,6 +61,22 @@ #define status_dcc(x) \ __asm__ volatile ("mrc p14, 0, %0, c14, c0, 0\n" : "=r" (x)) +#elif defined(CONFIG_CPU_ARMV8) +/* + * ARMV8 + */ +#define DCC_RBIT (1 << 30) +#define DCC_WBIT (1 << 29) + +#define write_dcc(x) \ + __asm__ volatile ("msr dbgdtrtx_el0, %0\n" : : "r" (x)) + +#define read_dcc(x) \ + __asm__ volatile ("mrs %0, dbgdtrrx_el0\n" : "=r" (x)) + +#define status_dcc(x) \ + __asm__ volatile ("mrs %0, mdccsr_el0\n" : "=r" (x)) + #else #define DCC_RBIT (1 << 0) #define DCC_WBIT (1 << 1) -- cgit v0.10.2 From 4c3832cc95d3223875593c459babd99baf0dd181 Mon Sep 17 00:00:00 2001 From: "Albert ARIBAUD \\(3ADEV\\)" Date: Wed, 1 Jul 2015 15:28:39 +0200 Subject: cairo: add missing MAINTAINERS file This removes the following two warnings from buildman: WARNING: no status info for 'cairo' WARNING: no maintainers for 'cairo' Signed-off-by: Albert ARIBAUD (3ADEV) diff --git a/board/quipos/cairo/MAINTAINERS b/board/quipos/cairo/MAINTAINERS new file mode 100644 index 0000000..01332da --- /dev/null +++ b/board/quipos/cairo/MAINTAINERS @@ -0,0 +1,6 @@ +CAIRO BOARD +M: Albert ARIBAUD (3ADEV) +S: Maintained +F: board/quipos/cairo/ +F: include/configs/omap3_cairo.h +F: configs/cairo_defconfig -- cgit v0.10.2 From 1c94578e7a3ce9d2e864b9243d213392d324205a Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Thu, 2 Jul 2015 09:37:59 +0530 Subject: board: am43xx: Add maintainer information am43xx_evm_ethboot/usbhost_boot_defconfig entries are missing in MAINTAINER file. Adding entries for them. Reported-by: Albert ARIBAUD Signed-off-by: Lokesh Vutla diff --git a/board/ti/am43xx/MAINTAINERS b/board/ti/am43xx/MAINTAINERS index d375278..3d40b17 100644 --- a/board/ti/am43xx/MAINTAINERS +++ b/board/ti/am43xx/MAINTAINERS @@ -5,3 +5,5 @@ F: board/ti/am43xx/ F: include/configs/am43xx_evm.h F: configs/am43xx_evm_defconfig F: configs/am43xx_evm_qspiboot_defconfig +F: configs/am43xx_evm_ethboot_defconfig +F: configs/am43xx_evm_usbhost_boot_defconfig -- cgit v0.10.2 From 64b77ed234ee726b07068621f8d9d6c249329e31 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 3 Jul 2015 16:13:09 +0900 Subject: ARM: disable HAVE_PRIVATE_LIBGCC for ARM64 We have not supported the private library for ARM 64bit. Prohibit ARM64 boards from enabling it until we make things ready. Signed-off-by: Masahiro Yamada diff --git a/arch/Kconfig b/arch/Kconfig index 96db5c5..afa1d6c 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -18,7 +18,7 @@ config ARC config ARM bool "ARM architecture" - select HAVE_PRIVATE_LIBGCC + select HAVE_PRIVATE_LIBGCC if !ARM64 select HAVE_GENERIC_BOARD select SUPPORT_OF_CONTROL -- cgit v0.10.2 From abe8f9a9348d5b3bba55e88039041bc545ded877 Mon Sep 17 00:00:00 2001 From: Yegor Yefremov Date: Wed, 1 Jul 2015 22:17:34 +0200 Subject: board: baltos - add maintainer information Signed-off-by: Yegor Yefremov diff --git a/board/vscom/baltos/MAINTAINERS b/board/vscom/baltos/MAINTAINERS new file mode 100644 index 0000000..e82acfe --- /dev/null +++ b/board/vscom/baltos/MAINTAINERS @@ -0,0 +1,6 @@ +BALTOS BOARD +M: Yegor Yefremov +S: Maintained +F: board/vscom/baltos/ +F: include/configs/baltos.h +F: configs/am335x_baltos_defconfig -- cgit v0.10.2 From 0a888f584c48984cb9657a5d42dc994b33c264a7 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Mon, 22 Jun 2015 14:43:10 +0530 Subject: ARM: DRA72x: fix io delay calibration for ethernet we currently use in-development IODelay values for DRA72x which are proposed in the data sheet, however, DRA72x EVM uses DP83865 ethernet Phy over RGMII. The PHY characteristics and routing choices made on the EVM, make the current iodelay values fail ethernet communication. Instead, we need to choose custom values for DRA72x-evm specifically designed for the PHY and routing on the platform for ethernet to function. Cc: Nishanth Menon Cc: Lokesh Vutla Tested-by: Lokesh Vutla Reviewed-by: Nishanth Menon Signed-off-by: Mugunthan V N diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h index c9301a5..5145301 100644 --- a/board/ti/dra7xx/mux_data.h +++ b/board/ti/dra7xx/mux_data.h @@ -156,30 +156,31 @@ const struct pad_conf_entry early_padconf[] = { #ifdef CONFIG_IODELAY_RECALIBRATION const struct iodelay_cfg_entry iodelay_cfg_array[] = { - {0x6F0, 480, 0}, /* RGMMI0_RXC_IN */ - {0x6FC, 111, 1641}, /* RGMMI0_RXCTL_IN */ - {0x708, 272, 1116}, /* RGMMI0_RXD0_IN */ - {0x714, 243, 1260}, /* RGMMI0_RXD1_IN */ - {0x720, 0, 1614}, /* RGMMI0_RXD2_IN */ - {0x72C, 105, 1673}, /* RGMMI0_RXD3_IN */ - {0x740, 531, 120}, /* RGMMI0_TXC_OUT */ - {0x74C, 11, 60}, /* RGMMI0_TXCTL_OUT */ - {0x758, 7, 120}, /* RGMMI0_TXD0_OUT */ - {0x764, 0, 0}, /* RGMMI0_TXD1_OUT */ - {0x770, 276, 120}, /* RGMMI0_TXD2_OUT */ - {0x77C, 440, 120}, /* RGMMI0_TXD3_OUT */ - {0xAB0, 702, 0}, /* CFG_VIN2A_D18_IN */ - {0xABC, 136, 976}, /* CFG_VIN2A_D19_IN */ - {0xAD4, 210, 1357}, /* CFG_VIN2A_D20_IN */ - {0xAE0, 189, 1462}, /* CFG_VIN2A_D21_IN */ - {0xAEC, 232, 1278}, /* CFG_VIN2A_D22_IN */ - {0xAF8, 0, 1397}, /* CFG_VIN2A_D23_IN */ - {0xA70, 1551, 115}, /* CFG_VIN2A_D12_OUT */ - {0xA7C, 816, 0}, /* CFG_VIN2A_D13_OUT */ - {0xA88, 876, 0}, /* CFG_VIN2A_D14_OUT */ - {0xA94, 312, 0}, /* CFG_VIN2A_D15_OUT */ - {0xAA0, 58, 0}, /* CFG_VIN2A_D16_OUT */ - {0xAAC, 0, 0}, /* CFG_VIN2A_D17_OUT */ + {0x6F0, 359, 0}, /* RGMMI0_RXC_IN */ + {0x6FC, 129, 1896}, /* RGMMI0_RXCTL_IN */ + {0x708, 80, 1391}, /* RGMMI0_RXD0_IN */ + {0x714, 196, 1522}, /* RGMMI0_RXD1_IN */ + {0x720, 40, 1860}, /* RGMMI0_RXD2_IN */ + {0x72C, 0, 1956}, /* RGMMI0_RXD3_IN */ + {0x740, 0, 220}, /* RGMMI0_TXC_OUT */ + {0x74C, 1820, 180}, /* RGMMI0_TXCTL_OUT */ + {0x758, 1740, 440}, /* RGMMI0_TXD0_OUT */ + {0x764, 1740, 240}, /* RGMMI0_TXD1_OUT */ + {0x770, 1680, 380}, /* RGMMI0_TXD2_OUT */ + {0x77C, 1740, 440}, /* RGMMI0_TXD3_OUT */ + /* These values are for using RGMII1 configuration on VIN2a_x pins. */ + {0xAB0, 596, 0}, /* CFG_VIN2A_D18_IN */ + {0xABC, 314, 980}, /* CFG_VIN2A_D19_IN */ + {0xAD4, 241, 1536}, /* CFG_VIN2A_D20_IN */ + {0xAE0, 103, 1689}, /* CFG_VIN2A_D21_IN */ + {0xAEC, 161, 1563}, /* CFG_VIN2A_D22_IN */ + {0xAF8, 0, 1613}, /* CFG_VIN2A_D23_IN */ + {0xA70, 0, 200}, /* CFG_VIN2A_D12_OUT */ + {0xA7C, 1560, 140}, /* CFG_VIN2A_D13_OUT */ + {0xA88, 1700, 0}, /* CFG_VIN2A_D14_OUT */ + {0xA94, 1260, 0}, /* CFG_VIN2A_D15_OUT */ + {0xAA0, 1400, 0}, /* CFG_VIN2A_D16_OUT */ + {0xAAC, 1290, 0}, /* CFG_VIN2A_D17_OUT */ }; #endif -- cgit v0.10.2 From 8fa2e20913183133998cbbb78a5184bd20ccfcbe Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 8 Jul 2015 16:18:39 +0200 Subject: sunxi: Adjust Ippo_q8h_v1_2_a33_1024x600 dts filename to match the upstream kernel sun8i-a33-ippo-q8h-v1.2-lcd1024x600.dts has been merged into the upstream Linux kernel as sun8i-a33-ippo-q8h-v1.2.dts, adjust u-boot to follow. Note we've never shipped a final u-boot version with the old name, so this is safe todo. Signed-off-by: Hans de Goede diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index bbca94f..19e1de6 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -128,7 +128,7 @@ dtb-$(CONFIG_MACH_SUN8I_A23) += \ dtb-$(CONFIG_MACH_SUN8I_A33) += \ sun8i-a33-et-q8-v1.6.dtb \ sun8i-a33-ga10h-v1.1.dtb \ - sun8i-a33-ippo-q8h-v1.2-lcd1024x600.dtb \ + sun8i-a33-ippo-q8h-v1.2.dtb \ sun8i-a33-sinlinx-sina33.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ diff --git a/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2-lcd1024x600.dts b/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2-lcd1024x600.dts deleted file mode 100644 index 9777149..0000000 --- a/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2-lcd1024x600.dts +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright 2015 Hans de Goede - * - * Minimal dts file for the Ippo Q8H V1.2 (A33, 1024x600) for u-boot only - * - * SPDX-License-Identifier: GPL-2.0+ or X11 - */ - -/dts-v1/; -#include "sun8i-a33.dtsi" - -/ { - model = "Ippo Q8H V1.2 (A33, 1024x600)"; - compatible = "ippo,q8h-v1.2-a33-lcd1024x600", "allwinner,sun8i-a23"; - - aliases { - serial0 = &r_uart; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2.dts b/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2.dts new file mode 100644 index 0000000..9777149 --- /dev/null +++ b/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2.dts @@ -0,0 +1,29 @@ +/* + * Copyright 2015 Hans de Goede + * + * Minimal dts file for the Ippo Q8H V1.2 (A33, 1024x600) for u-boot only + * + * SPDX-License-Identifier: GPL-2.0+ or X11 + */ + +/dts-v1/; +#include "sun8i-a33.dtsi" + +/ { + model = "Ippo Q8H V1.2 (A33, 1024x600)"; + compatible = "ippo,q8h-v1.2-a33-lcd1024x600", "allwinner,sun8i-a23"; + + aliases { + serial0 = &r_uart; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&r_uart { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; + status = "okay"; +}; diff --git a/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig b/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig index 63910c2..8e26f37 100644 --- a/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig +++ b/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig @@ -12,7 +12,7 @@ CONFIG_VIDEO_LCD_POWER="PH7" CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" CONFIG_USB_MUSB_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2-lcd1024x600" +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" -- cgit v0.10.2 From f3edfd30541d6f245d7dfa6fa7354cc916cc53e1 Mon Sep 17 00:00:00 2001 From: Bin Meng Date: Mon, 15 Jun 2015 18:40:19 +0800 Subject: net: designware: Program MAC address to hardware after soft reset commit f566c99 "net: Update hardware MAC address if it changes in env" removes writing MAC address to designware controller after soft reset. This makes designware ethernet port fail to work. Actually the MAC address should always be programmed after soft reset. Signed-off-by: Bin Meng Acked-by: Joe Hershberger diff --git a/drivers/net/designware.c b/drivers/net/designware.c index ae51cf3..645ca64 100644 --- a/drivers/net/designware.c +++ b/drivers/net/designware.c @@ -243,6 +243,12 @@ static int _dw_eth_init(struct dw_eth_dev *priv, u8 *enetaddr) mdelay(100); }; + /* + * Soft reset above clears HW address registers. + * So we have to set it here once again. + */ + _dw_write_hwaddr(priv, enetaddr); + rx_descs_init(priv); tx_descs_init(priv); -- cgit v0.10.2