From 5263a02e8b5034dfe962ed2ce9892a617bac8583 Mon Sep 17 00:00:00 2001
From: Luca Ellero <luca.ellero@brickedbrain.com>
Date: Tue, 16 Dec 2014 15:36:14 +0100
Subject: mtd: nand: mxs: fix PIO_WORDs in mxs_nand_read_buf()

There is only one pio_word in this DMA transaction so data field must be 1.

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>

diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c
index 7a064ab..8c6954b 100644
--- a/drivers/mtd/nand/mxs_nand.c
+++ b/drivers/mtd/nand/mxs_nand.c
@@ -453,7 +453,7 @@ static void mxs_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int length)
 	d->cmd.data =
 		MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_IRQ |
 		MXS_DMA_DESC_NAND_WAIT_4_READY | MXS_DMA_DESC_DEC_SEM |
-		MXS_DMA_DESC_WAIT4END | (4 << MXS_DMA_DESC_PIO_WORDS_OFFSET);
+		MXS_DMA_DESC_WAIT4END | (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET);
 
 	d->cmd.address = 0;
 
-- 
cgit v0.10.2


From 88a2cbb2aeb34c7c91f7cd30b59066368063bd07 Mon Sep 17 00:00:00 2001
From: Luca Ellero <luca.ellero@brickedbrain.com>
Date: Tue, 16 Dec 2014 15:36:15 +0100
Subject: mtd: nand: mxs: fix PIO_WORDs in mxs_nand_write_buf()

There is only one pio_word in this DMA transaction so data field must be 1.

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>

diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c
index 8c6954b..2d2b938 100644
--- a/drivers/mtd/nand/mxs_nand.c
+++ b/drivers/mtd/nand/mxs_nand.c
@@ -510,7 +510,7 @@ static void mxs_nand_write_buf(struct mtd_info *mtd, const uint8_t *buf,
 	d->cmd.data =
 		MXS_DMA_DESC_COMMAND_DMA_READ | MXS_DMA_DESC_IRQ |
 		MXS_DMA_DESC_DEC_SEM | MXS_DMA_DESC_WAIT4END |
-		(4 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
+		(1 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
 		(length << MXS_DMA_DESC_BYTES_OFFSET);
 
 	d->cmd.address = (dma_addr_t)nand_info->data_buf;
-- 
cgit v0.10.2


From aff092ed13dd1e26f0bed24dddaccf2b91275c89 Mon Sep 17 00:00:00 2001
From: Peter Tyser <ptyser@xes-inc.com>
Date: Tue, 3 Feb 2015 10:11:59 -0600
Subject: nand: Remove unused CONFIG_MTD_NAND_ECC_JFFS2 option

This option was removed along with legacy NAND support in
be33b046b549ad88c204c209508cd7657232ffbd.  Clean up some remnants.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

diff --git a/doc/README.nand b/doc/README.nand
index dee0e00..46d7edd 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -99,12 +99,6 @@ Configuration Options:
    CONFIG_CMD_NAND_TORTURE
       Enables the torture command (see description of this command below).
 
-   CONFIG_MTD_NAND_ECC_JFFS2
-      Define this if you want the Error Correction Code information in
-      the out-of-band data to be formatted to match the JFFS2 file system.
-      CONFIG_MTD_NAND_ECC_YAFFS would be another useful choice for
-      someone to implement.
-
    CONFIG_SYS_MAX_NAND_DEVICE
       The maximum number of NAND devices you want to support.
 
@@ -312,12 +306,6 @@ Platform specific options
 NOTE:
 =====
 
-The current NAND implementation is based on what is in recent
-Linux kernels.  The old legacy implementation has been removed.
-
-If you have board code which used CONFIG_NAND_LEGACY, you'll need
-to convert to the current NAND interface for it to continue to work.
-
 The Disk On Chip driver is currently broken and has been for some time.
 There is a driver in drivers/mtd/nand, taken from Linux, that works with
 the current NAND system but has not yet been adapted to the u-boot
diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index ce61a16..b79000e 100644
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -153,7 +153,6 @@
 
 /* JFFS2 */
 #ifdef CONFIG_CMD_JFFS2
-#define CONFIG_MTD_NAND_ECC_JFFS2
 #define CONFIG_JFFS2_CMDLINE
 #define CONFIG_JFFS2_NAND
 #endif
-- 
cgit v0.10.2


From 800772a1a6530c31509d65d8e9672fe209a35066 Mon Sep 17 00:00:00 2001
From: Peter Tyser <ptyser@xes-inc.com>
Date: Tue, 3 Feb 2015 10:24:05 -0600
Subject: nand: Remove unused read/write structures

The use of the nand_write_options and nand_read_options structures were
removed in commit dfbf617ff055e4216f78d358b0867c548916d14b.  Remove the
now-unused structures too.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

diff --git a/include/nand.h b/include/nand.h
index 15e31ab..673597e 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -82,34 +82,8 @@ static inline int nand_erase(nand_info_t *info, loff_t off, size_t size)
  * declarations from nand_util.c
  ****************************************************************************/
 
-struct nand_write_options {
-	u_char *buffer;		/* memory block containing image to write */
-	ulong length;		/* number of bytes to write */
-	ulong offset;		/* start address in NAND */
-	int quiet;		/* don't display progress messages */
-	int autoplace;		/* if true use auto oob layout */
-	int forcejffs2;		/* force jffs2 oob layout */
-	int forceyaffs;		/* force yaffs oob layout */
-	int noecc;		/* write without ecc */
-	int writeoob;		/* image contains oob data */
-	int pad;		/* pad to page size */
-	int blockalign;		/* 1|2|4 set multiple of eraseblocks
-				 * to align to */
-};
-
-typedef struct nand_write_options nand_write_options_t;
 typedef struct mtd_oob_ops mtd_oob_ops_t;
 
-struct nand_read_options {
-	u_char *buffer;		/* memory block in which read image is written*/
-	ulong length;		/* number of bytes to read */
-	ulong offset;		/* start address in NAND */
-	int quiet;		/* don't display progress messages */
-	int readoob;		/* put oob data in image */
-};
-
-typedef struct nand_read_options nand_read_options_t;
-
 struct nand_erase_options {
 	loff_t length;		/* number of bytes to erase */
 	loff_t offset;		/* first address in NAND to erase */
-- 
cgit v0.10.2


From 59b5a2ad83dfefae75011a839e94d4880ff02933 Mon Sep 17 00:00:00 2001
From: Peter Tyser <ptyser@xes-inc.com>
Date: Tue, 3 Feb 2015 11:58:12 -0600
Subject: nand: Add verification functions

Add nand_verify() and nand_verify_page_oob().  nand_verify() verifies
NAND contents against an arbitrarily sized buffer using ECC while
nand_verify_page_oob() verifies a NAND page's contents and OOB.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Tested-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>

diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index afdd160..f487756 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -464,6 +464,87 @@ static size_t drop_ffs(const nand_info_t *nand, const u_char *buf,
 #endif
 
 /**
+ * nand_verify_page_oob:
+ *
+ * Verify a page of NAND flash, including the OOB.
+ * Reads page of NAND and verifies the contents and OOB against the
+ * values in ops.
+ *
+ * @param nand		NAND device
+ * @param ops		MTD operations, including data to verify
+ * @param ofs		offset in flash
+ * @return		0 in case of success
+ */
+int nand_verify_page_oob(nand_info_t *nand, struct mtd_oob_ops *ops, loff_t ofs)
+{
+	int rval;
+	struct mtd_oob_ops vops;
+	size_t verlen = nand->writesize + nand->oobsize;
+
+	memcpy(&vops, ops, sizeof(vops));
+
+	vops.datbuf = malloc(verlen);
+
+	if (!vops.datbuf)
+		return -ENOMEM;
+
+	vops.oobbuf = vops.datbuf + nand->writesize;
+
+	rval = mtd_read_oob(nand, ofs, &vops);
+	if (!rval)
+		rval = memcmp(ops->datbuf, vops.datbuf, vops.len);
+	if (!rval)
+		rval = memcmp(ops->oobbuf, vops.oobbuf, vops.ooblen);
+
+	free(vops.datbuf);
+
+	return rval ? -EIO : 0;
+}
+
+/**
+ * nand_verify:
+ *
+ * Verify a region of NAND flash.
+ * Reads NAND in page-sized chunks and verifies the contents against
+ * the contents of a buffer.  The offset into the NAND must be
+ * page-aligned, and the function doesn't handle skipping bad blocks.
+ *
+ * @param nand		NAND device
+ * @param ofs		offset in flash
+ * @param len		buffer length
+ * @param buf		buffer to read from
+ * @return		0 in case of success
+ */
+int nand_verify(nand_info_t *nand, loff_t ofs, size_t len, u_char *buf)
+{
+	int rval = 0;
+	size_t verofs;
+	size_t verlen = nand->writesize;
+	uint8_t *verbuf = malloc(verlen);
+
+	if (!verbuf)
+		return -ENOMEM;
+
+	/* Read the NAND back in page-size groups to limit malloc size */
+	for (verofs = ofs; verofs < ofs + len;
+	     verofs += verlen, buf += verlen) {
+		verlen = min(nand->writesize, (uint32_t)(ofs + len - verofs));
+		rval = nand_read(nand, verofs, &verlen, verbuf);
+		if (!rval || (rval == -EUCLEAN))
+			rval = memcmp(buf, verbuf, verlen);
+
+		if (rval)
+			break;
+	}
+
+	free(verbuf);
+
+	return rval ? -EIO : 0;
+}
+
+
+
+/**
  * nand_write_skip_bad:
  *
  * Write image to NAND flash.
@@ -501,7 +582,7 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 
 #ifdef CONFIG_CMD_NAND_YAFFS
 	if (flags & WITH_YAFFS_OOB) {
-		if (flags & ~WITH_YAFFS_OOB)
+		if (flags & (~WITH_YAFFS_OOB & ~WITH_WR_VERIFY))
 			return -EINVAL;
 
 		int pages;
@@ -554,6 +635,10 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 
 	if (!need_skip && !(flags & WITH_DROP_FFS)) {
 		rval = nand_write(nand, offset, length, buffer);
+
+		if ((flags & WITH_WR_VERIFY) && !rval)
+			rval = nand_verify(nand, offset, *length, buffer);
+
 		if (rval == 0)
 			return 0;
 
@@ -601,6 +686,11 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 				ops.oobbuf = ops.datbuf + pagesize;
 
 				rval = mtd_write_oob(nand, offset, &ops);
+
+				if ((flags & WITH_WR_VERIFY) && !rval)
+					rval = nand_verify_page_oob(nand,
+							&ops, offset);
+
 				if (rval != 0)
 					break;
 
@@ -620,6 +710,11 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 
 			rval = nand_write(nand, offset, &truncated_write_size,
 					p_buffer);
+
+			if ((flags & WITH_WR_VERIFY) && !rval)
+				rval = nand_verify(nand, offset,
+					truncated_write_size, p_buffer);
+
 			offset += write_size;
 			p_buffer += write_size;
 		}
diff --git a/include/nand.h b/include/nand.h
index 673597e..8ea4d5d 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -108,11 +108,15 @@ int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 				  * is a 'mode' meaning it cannot be mixed with
 				  * other flags */
 #define WITH_DROP_FFS	(1 << 1) /* drop trailing all-0xff pages */
+#define WITH_WR_VERIFY	(1 << 2) /* verify data was written correctly */
 
 int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 			size_t *actual, loff_t lim, u_char *buffer, int flags);
 int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts);
 int nand_torture(nand_info_t *nand, loff_t offset);
+int nand_verify_page_oob(nand_info_t *nand, struct mtd_oob_ops *ops,
+			loff_t ofs);
+int nand_verify(nand_info_t *nand, loff_t ofs, size_t len, u_char *buf);
 
 #define NAND_LOCK_STATUS_TIGHT	0x01
 #define NAND_LOCK_STATUS_UNLOCK 0x04
-- 
cgit v0.10.2


From 6b94f118a213583ada80bab25fedacc08562392d Mon Sep 17 00:00:00 2001
From: Peter Tyser <ptyser@xes-inc.com>
Date: Tue, 3 Feb 2015 11:58:13 -0600
Subject: cmd_nand: Verify writes to NAND

Previously NAND writes were only verified when CONFIG_MTD_NAND_VERIFY_WRITE
was defined.  On boards without this define writes could fail silently.
Boards with CONFIG_MTD_NAND_VERIFY_WRITE could prematurely report
failures which ECC could correct.

Add a verification step after all "nand write[.x]" commands to ensure the
writes were successful.  The verification uses ECC for for "normal"
writes, but does not for raw and yaffs writes.  Some test cases which
inject fake bad bits on a 2K page flash are below.

Test cases with CONFIG_MTD_NAND_VERIFY_WRITE defined:
  Example of an ECC write which previously failed when
  CONFIG_MTD_NAND_VERIFY_WRITE was defined, but now succeeds because ECC
  is used during verification:
      nand erase 0 0x10000
      dhcp /somefile
      mw.b 0x10000 0xff 0x2000
      mw.b 0x10020 0xfe 1
      nand write.raw 0x10000 0x800 1
      mw.b 0x1000020 0x01 1
      nand write 0x1000000 0x800 0x1800

Test cases without CONFIG_MTD_NAND_VERIFY_WRITE defined:
  Example of an ECC write which previously silently failed:
      nand erase 0 0x10000
      dhcp /somefile
      mw.b 0x10000 0xff 0x2000
      mw.b 0x10020 0x00 1
      nand write.raw 0x10000 0x800 1
      mw.b 0x1000020 0xff 1
      nand write 0x1000000 0x800 0x1800

  Example of a raw write which previously failed silently due to stuck
  data bit, but now errors out:
      nand erase 0 0x10000
      dhcp /somefile
      mw.b 0x10000 0xff 0x2000
      mw.b 0x10020 0xfe 1
      nand write.raw 0x10000 0x800 1
      mw.b 0x1000020 0x01 1
      nand write.raw 0x1000000 0x800 3

  Example of a raw write which previously failed silently due to stuck OOB
  bit, but now errors out:
      nand erase 0 0x10000
      dhcp /somefile
      mw.b 0x10000 0xff 0x2000
      mw.b 0x10810 0xfe 1
      nand write.raw 0x10000 0x800 1
      mw.b 0x1000810 0x01 1
      nand write.raw 0x1000000 0x800 3

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Tested-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>

diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index 7f962dc..bada28c 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -419,10 +419,13 @@ static int raw_access(nand_info_t *nand, ulong addr, loff_t off, ulong count,
 			.mode = MTD_OPS_RAW
 		};
 
-		if (read)
+		if (read) {
 			ret = mtd_read_oob(nand, off, &ops);
-		else
+		} else {
 			ret = mtd_write_oob(nand, off, &ops);
+			if (!ret)
+				ret = nand_verify_page_oob(nand, &ops, off);
+		}
 
 		if (ret) {
 			printf("%s: error at offset %llx, ret %d\n",
@@ -690,7 +693,8 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 			else
 				ret = nand_write_skip_bad(nand, off, &rwsize,
 							  NULL, maxsize,
-							  (u_char *)addr, 0);
+							  (u_char *)addr,
+							  WITH_WR_VERIFY);
 #ifdef CONFIG_CMD_NAND_TRIMFFS
 		} else if (!strcmp(s, ".trimffs")) {
 			if (read) {
@@ -699,7 +703,7 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 			}
 			ret = nand_write_skip_bad(nand, off, &rwsize, NULL,
 						maxsize, (u_char *)addr,
-						WITH_DROP_FFS);
+						WITH_DROP_FFS | WITH_WR_VERIFY);
 #endif
 #ifdef CONFIG_CMD_NAND_YAFFS
 		} else if (!strcmp(s, ".yaffs")) {
@@ -709,7 +713,7 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 			}
 			ret = nand_write_skip_bad(nand, off, &rwsize, NULL,
 						maxsize, (u_char *)addr,
-						WITH_YAFFS_OOB);
+						WITH_YAFFS_OOB | WITH_WR_VERIFY);
 #endif
 		} else if (!strcmp(s, ".oob")) {
 			/* out-of-band data */
-- 
cgit v0.10.2


From 9ac71f112eb3cffc42e012fcdf5009e5b3b01a1d Mon Sep 17 00:00:00 2001
From: Peter Tyser <ptyser@xes-inc.com>
Date: Tue, 3 Feb 2015 11:58:14 -0600
Subject: dfu: nand: Verify writes

Previously NAND writes were not verified and could fail silently.  Add
a verification step after all writes to NAND.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>

diff --git a/drivers/dfu/dfu_nand.c b/drivers/dfu/dfu_nand.c
index f9ee189..a975492 100644
--- a/drivers/dfu/dfu_nand.c
+++ b/drivers/dfu/dfu_nand.c
@@ -64,7 +64,7 @@ static int nand_block_op(enum dfu_op op, struct dfu_entity *dfu,
 			return ret;
 		/* then write */
 		ret = nand_write_skip_bad(nand, start, &count, &actual,
-				lim, buf, 0);
+				lim, buf, WITH_WR_VERIFY);
 	}
 
 	if (ret != 0) {
-- 
cgit v0.10.2


From 073adf987e8251ad934fcac4fd1bf20d4f34f96e Mon Sep 17 00:00:00 2001
From: Peter Tyser <ptyser@xes-inc.com>
Date: Tue, 3 Feb 2015 11:58:15 -0600
Subject: nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE

The CONFIG_MTD_NAND_VERIFY_WRITE has been removed from Linux for some
time and a more generic method of NAND verification now exists in U-Boot.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Tested-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>

diff --git a/README b/README
index 5d57eb9..b7c2a17 100644
--- a/README
+++ b/README
@@ -3483,9 +3483,6 @@ FIT uImage format:
 		Adds the MTD partitioning infrastructure from the Linux
 		kernel. Needed for UBI support.
 
-		CONFIG_MTD_NAND_VERIFY_WRITE
-		verify if the written data is correct reread.
-
 - UBI support
 		CONFIG_CMD_UBI
 
diff --git a/board/prodrive/alpr/nand.c b/board/prodrive/alpr/nand.c
index 5427de5..ca40cea 100644
--- a/board/prodrive/alpr/nand.c
+++ b/board/prodrive/alpr/nand.c
@@ -93,19 +93,6 @@ static void alpr_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 	}
 }
 
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-static int alpr_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
-{
-	int i;
-
-	for (i = 0; i < len; i++)
-		if (buf[i] != readb(&(alpr_ndfc->data)))
-			return i;
-
-	return 0;
-}
-#endif
-
 static int alpr_nand_dev_ready(struct mtd_info *mtd)
 {
 	/*
@@ -130,9 +117,6 @@ int board_nand_init(struct nand_chip *nand)
 	nand->read_byte  = alpr_nand_read_byte;
 	nand->write_buf  = alpr_nand_write_buf;
 	nand->read_buf   = alpr_nand_read_buf;
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-	nand->verify_buf = alpr_nand_verify_buf;
-#endif
 	nand->dev_ready  = alpr_nand_dev_ready;
 
 	return 0;
diff --git a/board/socrates/nand.c b/board/socrates/nand.c
index 7394478..15e6ea6 100644
--- a/board/socrates/nand.c
+++ b/board/socrates/nand.c
@@ -18,9 +18,6 @@ static void sc_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len);
 static u_char sc_nand_read_byte(struct mtd_info *mtd);
 static u16 sc_nand_read_word(struct mtd_info *mtd);
 static void sc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len);
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-static int sc_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len);
-#endif
 static int sc_nand_device_ready(struct mtd_info *mtdinfo);
 
 #define FPGA_NAND_CMD_MASK		(0x7 << 28)
@@ -102,25 +99,6 @@ static void sc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 	}
 }
 
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-/**
- * sc_nand_verify_buf -  Verify chip data against buffer
- * @mtd:	MTD device structure
- * @buf:	buffer containing the data to compare
- * @len:	number of bytes to compare
- */
-static int sc_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
-{
-	int i;
-
-	for (i = 0; i < len; i++) {
-		if (buf[i] != sc_nand_read_byte(mtd));
-			return -EFAULT;
-	}
-	return 0;
-}
-#endif
-
 /**
  * sc_nand_device_ready - Check the NAND device is ready for next command.
  * @mtd:	MTD device structure
@@ -178,9 +156,6 @@ int board_nand_init(struct nand_chip *nand)
 	nand->read_word = sc_nand_read_word;
 	nand->write_buf = sc_nand_write_buf;
 	nand->read_buf = sc_nand_read_buf;
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-	nand->verify_buf = sc_nand_verify_buf;
-#endif
 
 	return 0;
 }
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 41689b5..a397074 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -405,18 +405,6 @@ static int nand_davinci_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 		goto err;
 	}
 
-#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
-	/* Send command to read back the data */
-	chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
-
-	if (chip->verify_buf(mtd, buf, mtd->writesize)) {
-		ret = -EIO;
-		goto err;
-	}
-
-	/* Make sure the next page prog is preceded by a status read */
-	chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
-#endif
 err:
 	/* restore ECC layout */
 	if (page < CONFIG_KEYSTONE_NAND_MAX_RBL_PAGE) {
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 3372b64..e85832d 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -561,41 +561,6 @@ static void fsl_elbc_read_buf(struct mtd_info *mtd, u8 *buf, int len)
 		       len, avail);
 }
 
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-/*
- * Verify buffer against the FCM Controller Data Buffer
- */
-static int fsl_elbc_verify_buf(struct mtd_info *mtd,
-			       const u_char *buf, int len)
-{
-	struct nand_chip *chip = mtd->priv;
-	struct fsl_elbc_mtd *priv = chip->priv;
-	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
-	int i;
-
-	if (len < 0) {
-		printf("write_buf of %d bytes", len);
-		return -EINVAL;
-	}
-
-	if ((unsigned int)len > ctrl->read_bytes - ctrl->index) {
-		printf("verify_buf beyond end of buffer "
-		       "(%d requested, %u available)\n",
-		       len, ctrl->read_bytes - ctrl->index);
-
-		ctrl->index = ctrl->read_bytes;
-		return -EINVAL;
-	}
-
-	for (i = 0; i < len; i++)
-		if (in_8(&ctrl->addr[ctrl->index + i]) != buf[i])
-			break;
-
-	ctrl->index += len;
-	return i == len && ctrl->status == LTESR_CC ? 0 : -EIO;
-}
-#endif
-
 /* This function is called after Program and Erase Operations to
  * check for success or failure.
  */
@@ -727,9 +692,6 @@ static int fsl_elbc_chip_init(int devnum, u8 *addr)
 	nand->read_byte = fsl_elbc_read_byte;
 	nand->write_buf = fsl_elbc_write_buf;
 	nand->read_buf = fsl_elbc_read_buf;
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-	nand->verify_buf = fsl_elbc_verify_buf;
-#endif
 	nand->select_chip = fsl_elbc_select_chip;
 	nand->cmdfunc = fsl_elbc_cmdfunc;
 	nand->waitfunc = fsl_elbc_wait;
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index b283eae..7903eeb 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -683,41 +683,6 @@ static void fsl_ifc_read_buf(struct mtd_info *mtd, u8 *buf, int len)
 		       __func__, len, avail);
 }
 
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-/*
- * Verify buffer against the IFC Controller Data Buffer
- */
-static int fsl_ifc_verify_buf(struct mtd_info *mtd,
-			       const u_char *buf, int len)
-{
-	struct nand_chip *chip = mtd->priv;
-	struct fsl_ifc_mtd *priv = chip->priv;
-	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
-	int i;
-
-	if (len < 0) {
-		printf("%s of %d bytes", __func__, len);
-		return -EINVAL;
-	}
-
-	if ((unsigned int)len > ctrl->read_bytes - ctrl->index) {
-		printf("%s beyond end of buffer "
-		       "(%d requested, %u available)\n",
-		       __func__, len, ctrl->read_bytes - ctrl->index);
-
-		ctrl->index = ctrl->read_bytes;
-		return -EINVAL;
-	}
-
-	for (i = 0; i < len; i++)
-		if (in_8(&ctrl->addr[ctrl->index + i]) != buf[i])
-			break;
-
-	ctrl->index += len;
-	return i == len && ctrl->status == IFC_NAND_EVTER_STAT_OPC ? 0 : -EIO;
-}
-#endif
-
 /* This function is called after Program and Erase Operations to
  * check for success or failure.
  */
@@ -940,9 +905,6 @@ static int fsl_ifc_chip_init(int devnum, u8 *addr)
 
 	nand->write_buf = fsl_ifc_write_buf;
 	nand->read_buf = fsl_ifc_read_buf;
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-	nand->verify_buf = fsl_ifc_verify_buf;
-#endif
 	nand->select_chip = fsl_ifc_select_chip;
 	nand->cmdfunc = fsl_ifc_cmdfunc;
 	nand->waitfunc = fsl_ifc_wait;
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index 65ce98a..5426c32 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -153,21 +153,6 @@ static void upm_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 		buf[i] = in_8(chip->IO_ADDR_R);
 }
 
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-static int upm_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
-{
-	int i;
-	struct nand_chip *chip = mtd->priv;
-
-	for (i = 0; i < len; i++) {
-		if (buf[i] != in_8(chip->IO_ADDR_R))
-			return -EFAULT;
-	}
-
-	return 0;
-}
-#endif
-
 static int nand_dev_ready(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
@@ -193,9 +178,6 @@ int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun)
 	chip->read_byte = upm_nand_read_byte;
 	chip->read_buf = upm_nand_read_buf;
 	chip->write_buf = upm_nand_write_buf;
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-	chip->verify_buf = upm_nand_verify_buf;
-#endif
 	if (fun->dev_ready)
 		chip->dev_ready = nand_dev_ready;
 
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
index 7233bfc..e621c36 100644
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -459,29 +459,6 @@ static void mpc5121_nfc_write_buf(struct mtd_info *mtd,
 	mpc5121_nfc_buf_copy(mtd, (u_char *) buf, len, 1);
 }
 
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-/* Compare buffer with NAND flash */
-static int mpc5121_nfc_verify_buf(struct mtd_info *mtd,
-				  const u_char * buf, int len)
-{
-	u_char tmp[256];
-	uint bsize;
-
-	while (len) {
-		bsize = min(len, 256);
-		mpc5121_nfc_read_buf(mtd, tmp, bsize);
-
-		if (memcmp(buf, tmp, bsize))
-			return 1;
-
-		buf += bsize;
-		len -= bsize;
-	}
-
-	return 0;
-}
-#endif
-
 /* Read byte from NFC buffers */
 static u8 mpc5121_nfc_read_byte(struct mtd_info *mtd)
 {
@@ -609,9 +586,6 @@ int board_nand_init(struct nand_chip *chip)
 	chip->read_word = mpc5121_nfc_read_word;
 	chip->read_buf = mpc5121_nfc_read_buf;
 	chip->write_buf = mpc5121_nfc_write_buf;
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-	chip->verify_buf = mpc5121_nfc_verify_buf;
-#endif
 	chip->select_chip = mpc5121_nfc_select_chip;
 	chip->bbt_options = NAND_BBT_USE_FLASH;
 	chip->ecc.mode = NAND_ECC_SOFT;
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 2e5b5b9..f12b07e 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -949,34 +949,6 @@ static void mxc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 	host->col_addr = col;
 }
 
-#ifdef __UBOOT__
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-/*
- * Used by the upper layer to verify the data in NAND Flash
- * with the data in the buf.
- */
-static int mxc_nand_verify_buf(struct mtd_info *mtd,
-				const u_char *buf, int len)
-{
-	u_char tmp[256];
-	uint bsize;
-
-	while (len) {
-		bsize = min(len, 256);
-		mxc_nand_read_buf(mtd, tmp, bsize);
-
-		if (memcmp(buf, tmp, bsize))
-			return 1;
-
-		buf += bsize;
-		len -= bsize;
-	}
-
-	return 0;
-}
-#endif
-#endif
-
 /*
  * This function is used by upper layer for select and
  * deselect of the NAND chip
@@ -1207,11 +1179,6 @@ int board_nand_init(struct nand_chip *this)
 	this->read_word = mxc_nand_read_word;
 	this->write_buf = mxc_nand_write_buf;
 	this->read_buf = mxc_nand_read_buf;
-#ifdef __UBOOT__
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-	this->verify_buf = mxc_nand_verify_buf;
-#endif
-#endif
 
 	host->regs = (struct mxc_nand_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE;
 #ifdef MXC_NFC_V3_2
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 6db6566..c0e381a 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -361,51 +361,6 @@ void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
 	ioread8_rep(chip->IO_ADDR_R, buf, len);
 }
 
-#ifdef __UBOOT__
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-/**
- * nand_verify_buf - [DEFAULT] Verify chip data against buffer
- * @mtd: MTD device structure
- * @buf: buffer containing the data to compare
- * @len: number of bytes to compare
- *
- * Default verify function for 8bit buswidth.
- */
-static int nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
-{
-	int i;
-	struct nand_chip *chip = mtd->priv;
-
-	for (i = 0; i < len; i++)
-		if (buf[i] != readb(chip->IO_ADDR_R))
-			return -EFAULT;
-	return 0;
-}
-
-/**
- * nand_verify_buf16 - [DEFAULT] Verify chip data against buffer
- * @mtd: MTD device structure
- * @buf: buffer containing the data to compare
- * @len: number of bytes to compare
- *
- * Default verify function for 16bit buswidth.
- */
-static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
-{
-	int i;
-	struct nand_chip *chip = mtd->priv;
-	u16 *p = (u16 *) buf;
-	len >>= 1;
-
-	for (i = 0; i < len; i++)
-		if (p[i] != readw(chip->IO_ADDR_R))
-			return -EFAULT;
-
-	return 0;
-}
-#endif
-#endif
-
 /**
  * nand_write_buf16 - [DEFAULT] write buffer to chip
  * @mtd: MTD device structure
@@ -2435,20 +2390,6 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 		status = chip->waitfunc(mtd, chip);
 	}
 
-
-#ifdef __UBOOT__
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-	/* Send command to read back the data */
-	chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
-
-	if (chip->verify_buf(mtd, buf, mtd->writesize))
-		return -EIO;
-
-	/* Make sure the next page prog is preceded by a status read */
-	chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
-#endif
-#endif
-
 	return 0;
 }
 
@@ -3139,12 +3080,6 @@ static void nand_set_defaults(struct nand_chip *chip, int busw)
 		chip->read_buf = busw ? nand_read_buf16 : nand_read_buf;
 	if (!chip->scan_bbt)
 		chip->scan_bbt = nand_default_bbt;
-#ifdef __UBOOT__
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-	if (!chip->verify_buf)
-		chip->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf;
-#endif
-#endif
 
 	if (!chip->controller) {
 		chip->controller = &chip->hwcontrol;
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
index 2659595..8a68cb0 100644
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
@@ -118,21 +118,6 @@ static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len
 		out_be32((u32 *)(base + NDFC_DATA), *p++);
 }
 
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
-{
-	struct nand_chip *this = mtdinfo->priv;
-	ulong base = (ulong) this->IO_ADDR_W & 0xffffff00;
-	uint32_t *p = (uint32_t *) buf;
-
-	for (; len > 0; len -= 4)
-		if (*p++ != in_be32((u32 *)(base + NDFC_DATA)))
-			return -1;
-
-	return 0;
-}
-#endif
-
 /*
  * Read a byte from the NDFC.
  */
@@ -207,9 +192,6 @@ int board_nand_init(struct nand_chip *nand)
 #endif
 
 	nand->write_buf  = ndfc_write_buf;
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-	nand->verify_buf = ndfc_verify_buf;
-#endif
 	nand->read_byte = ndfc_read_byte;
 
 	chip++;
diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h
index 838a0b1..dca1ca5 100644
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@@ -391,7 +391,6 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h
index 6aaaaa4..047ed8b 100644
--- a/include/configs/BSC9131RDB.h
+++ b/include/configs/BSC9131RDB.h
@@ -198,7 +198,6 @@ extern unsigned long get_sdram_size(void);
 
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
 
diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
index 59a8d1b..ceee0e4 100644
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -320,7 +320,6 @@ combinations. this should be removed later
 /* NAND */
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h
index e24b923..7c45c36 100644
--- a/include/configs/C29XPCIE.h
+++ b/include/configs/C29XPCIE.h
@@ -234,7 +234,6 @@
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(1024 * 1024)
 
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index d9a19c3..9cea76a 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -272,7 +272,6 @@
 	"mtdparts=e2800000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)"
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND 1
 #define CONFIG_NAND_FSL_ELBC 1
 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index 1384f36..fbf38c8 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -245,7 +245,6 @@
 	"mtdparts=e0600000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)"
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE	1
 #define CONFIG_CMD_NAND			1
 #define CONFIG_NAND_FSL_ELBC		1
 #define CONFIG_SYS_NAND_BLOCK_SIZE	16384
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index 85f5c40..521904d 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -283,7 +283,6 @@
  * NAND Flash on the Local Bus
  */
 #define CONFIG_CMD_NAND		1
-#define CONFIG_MTD_NAND_VERIFY_WRITE	1
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_NAND_FSL_ELBC	1
 
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 2722164..dc09b1f 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -308,7 +308,6 @@
 				CONFIG_SYS_NAND_BASE + 0x80000, \
 				CONFIG_SYS_NAND_BASE + 0xC0000}
 #define CONFIG_SYS_MAX_NAND_DEVICE	4
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND		1
 #define CONFIG_NAND_FSL_ELBC	1
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 4da247c..e624c71 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -194,7 +194,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE, }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE	1
 #define CONFIG_CMD_NAND			1
 #define CONFIG_NAND_FSL_ELBC		1
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 0b07876..5e7bc49 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -303,7 +303,6 @@
 				CONFIG_SYS_NAND_BASE + 0x80000,\
 				CONFIG_SYS_NAND_BASE + 0xC0000}
 #define CONFIG_SYS_MAX_NAND_DEVICE    4
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND		1
 #define CONFIG_NAND_FSL_ELBC	1
 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index cd6a39c..ccf3ce3 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -444,7 +444,6 @@ extern unsigned long get_sdram_size(void);
 
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #if defined(CONFIG_P1010RDB_PA)
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index 4371110..795e3b5 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -290,7 +290,6 @@
 
 #define CONFIG_SYS_NAND_BASE_LIST	{CONFIG_SYS_NAND_BASE}
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND			1
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(256 * 1024)
 #define CONFIG_ELBC_NAND_SPL_STATIC_PGSIZE
diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h
index a8b7817..d65c461 100644
--- a/include/configs/P1023RDB.h
+++ b/include/configs/P1023RDB.h
@@ -136,7 +136,6 @@ extern unsigned long get_clock_freq(void);
 
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 #define CONFIG_NAND_FSL_ELBC
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index d8d30bb..f99da65 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -251,7 +251,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 
diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h
index 3f02ced..2927043 100644
--- a/include/configs/T102xQDS.h
+++ b/include/configs/T102xQDS.h
@@ -398,7 +398,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NAND_DDR_LAW		11
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index bd40d6a..84e8336 100644
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -379,7 +379,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NAND_DDR_LAW		11
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(512 * 1024)
diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index 92f5f56..faf8c9d 100644
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -308,7 +308,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NAND_DDR_LAW		11
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 5263318..6cc95ef 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -341,7 +341,6 @@
 #define CONFIG_SYS_NAND_DDR_LAW		11
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(512 * 1024)
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index ff6d2c1..046aa48 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -357,7 +357,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NAND_DDR_LAW		11
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
 
diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index db6b42e..faaf22c 100644
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -328,7 +328,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NAND_DDR_LAW		11
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(512 * 1024)
 
diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h
index dd7d52f..cfe6557 100644
--- a/include/configs/T4240QDS.h
+++ b/include/configs/T4240QDS.h
@@ -281,7 +281,6 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
index b644a6c..c1ad35a 100644
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@@ -467,7 +467,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NAND_DDR_LAW		11
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(512 * 1024)
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 225ffdd..8e27ae4 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -248,7 +248,6 @@
 
 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 
diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h
index 2384864..c1ca56c 100644
--- a/include/configs/ids8313.h
+++ b/include/configs/ids8313.h
@@ -214,7 +214,6 @@
 #define CONFIG_SYS_NAND_BASE		0xE1000000
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_MAX_CHIPS	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_NAND_FSL_ELBC
 #define CONFIG_SYS_NAND_PAGE_SIZE	(2048)
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 << 10)
diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h
index 949b3da..b70b5b1 100644
--- a/include/configs/km/kmp204x-common.h
+++ b/include/configs/km/kmp204x-common.h
@@ -167,7 +167,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 3dc4da3..5de416d 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -251,7 +251,6 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h
index f80efed..e0435cc 100644
--- a/include/configs/ls2085a_common.h
+++ b/include/configs/ls2085a_common.h
@@ -191,7 +191,6 @@
 
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 5f27c2a..a5f9717 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -494,7 +494,6 @@
 
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 #if defined(CONFIG_P1020RDB_PD)
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h
index bce94b3..107f01a 100644
--- a/include/configs/ve8313.h
+++ b/include/configs/ve8313.h
@@ -186,7 +186,6 @@
  */
 #define CONFIG_SYS_NAND_BASE		0x61000000
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND 1
 #define CONFIG_NAND_FSL_ELBC 1
 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384
diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h
index d6b6143..988a2e8 100644
--- a/include/configs/xpedite537x.h
+++ b/include/configs/xpedite537x.h
@@ -131,7 +131,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_NAND_BASE_LIST	{CONFIG_SYS_NAND_BASE, \
 					 CONFIG_SYS_NAND_BASE2}
 #define CONFIG_SYS_MAX_NAND_DEVICE	2
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_SYS_NAND_QUIET_TEST	/* 2nd NAND flash not always populated */
 #define CONFIG_NAND_FSL_ELBC
 
diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h
index 4536b94..ac3f4f1 100644
--- a/include/configs/xpedite550x.h
+++ b/include/configs/xpedite550x.h
@@ -122,7 +122,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_NAND_BASE_LIST	{CONFIG_SYS_NAND_BASE, \
 					 CONFIG_SYS_NAND_BASE2}
 #define CONFIG_SYS_MAX_NAND_DEVICE	2
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_SYS_NAND_QUIET_TEST	/* 2nd NAND flash not always populated */
 #define CONFIG_NAND_FSL_ELBC
 
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 8438490..bc927ec 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -678,11 +678,6 @@ struct nand_chip {
 	void (*write_byte)(struct mtd_info *mtd, uint8_t byte);
 	void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
 	void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
-#ifdef __UBOOT__
-#if defined(CONFIG_MTD_NAND_VERIFY_WRITE)
-        int (*verify_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
-#endif
-#endif
 	void (*select_chip)(struct mtd_info *mtd, int chip);
 	int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip);
 	int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
-- 
cgit v0.10.2


From 004a1fdb45fb06ee2faf6e50945ceb79d43a2f41 Mon Sep 17 00:00:00 2001
From: Peter Tyser <ptyser@xes-inc.com>
Date: Tue, 3 Feb 2015 11:58:16 -0600
Subject: nand: yaffs: Remove the "nand write.yaffs" command

This command is only enabled by one board, complicates the NAND code,
and doesn't appear to have been functioning properly for several
years.  If there are no bad blocks in the NAND region being written
nand_write_skip_bad() will take the shortcut of calling nand_write()
which bypasses the special yaffs handling.  This causes invalid YAFFS
data to be written. See
http://lists.denx.de/pipermail/u-boot/2011-September/102830.html for
an example and a potential workaround.

U-Boot still retains the ability to mount and access YAFFS partitions
via CONFIG_YAFFS2.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index bada28c..17fa7ea 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -705,16 +705,6 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 						maxsize, (u_char *)addr,
 						WITH_DROP_FFS | WITH_WR_VERIFY);
 #endif
-#ifdef CONFIG_CMD_NAND_YAFFS
-		} else if (!strcmp(s, ".yaffs")) {
-			if (read) {
-				printf("Unknown nand command suffix '%s'.\n", s);
-				return 1;
-			}
-			ret = nand_write_skip_bad(nand, off, &rwsize, NULL,
-						maxsize, (u_char *)addr,
-						WITH_YAFFS_OOB | WITH_WR_VERIFY);
-#endif
 		} else if (!strcmp(s, ".oob")) {
 			/* out-of-band data */
 			mtd_oob_ops_t ops = {
@@ -857,11 +847,6 @@ static char nand_help_text[] =
 	"    'addr', skipping bad blocks and dropping any pages at the end\n"
 	"    of eraseblocks that contain only 0xFF\n"
 #endif
-#ifdef CONFIG_CMD_NAND_YAFFS
-	"nand write.yaffs - addr off|partition size\n"
-	"    write 'size' bytes starting at offset 'off' with yaffs format\n"
-	"    from memory address 'addr', skipping bad blocks.\n"
-#endif
 	"nand erase[.spread] [clean] off size - erase 'size' bytes "
 	"from offset 'off'\n"
 	"    With '.spread', erase enough for given file size, otherwise,\n"
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index f487756..12dd26a 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -580,24 +580,7 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 	if (actual)
 		*actual = 0;
 
-#ifdef CONFIG_CMD_NAND_YAFFS
-	if (flags & WITH_YAFFS_OOB) {
-		if (flags & (~WITH_YAFFS_OOB & ~WITH_WR_VERIFY))
-			return -EINVAL;
-
-		int pages;
-		pages = nand->erasesize / nand->writesize;
-		blocksize = (pages * nand->oobsize) + nand->erasesize;
-		if (*length % (nand->writesize + nand->oobsize)) {
-			printf("Attempt to write incomplete page"
-				" in yaffs mode\n");
-			return -EINVAL;
-		}
-	} else
-#endif
-	{
-		blocksize = nand->erasesize;
-	}
+	blocksize = nand->erasesize;
 
 	/*
 	 * nand_write() handles unaligned, partial page writes.
@@ -666,58 +649,22 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 		else
 			write_size = blocksize - block_offset;
 
-#ifdef CONFIG_CMD_NAND_YAFFS
-		if (flags & WITH_YAFFS_OOB) {
-			int page, pages;
-			size_t pagesize = nand->writesize;
-			size_t pagesize_oob = pagesize + nand->oobsize;
-			struct mtd_oob_ops ops;
-
-			ops.len = pagesize;
-			ops.ooblen = nand->oobsize;
-			ops.mode = MTD_OPS_AUTO_OOB;
-			ops.ooboffs = 0;
-
-			pages = write_size / pagesize_oob;
-			for (page = 0; page < pages; page++) {
-				WATCHDOG_RESET();
-
-				ops.datbuf = p_buffer;
-				ops.oobbuf = ops.datbuf + pagesize;
-
-				rval = mtd_write_oob(nand, offset, &ops);
-
-				if ((flags & WITH_WR_VERIFY) && !rval)
-					rval = nand_verify_page_oob(nand,
-							&ops, offset);
-
-				if (rval != 0)
-					break;
-
-				offset += pagesize;
-				p_buffer += pagesize_oob;
-			}
-		}
-		else
-#endif
-		{
-			truncated_write_size = write_size;
+		truncated_write_size = write_size;
 #ifdef CONFIG_CMD_NAND_TRIMFFS
-			if (flags & WITH_DROP_FFS)
-				truncated_write_size = drop_ffs(nand, p_buffer,
-						&write_size);
+		if (flags & WITH_DROP_FFS)
+			truncated_write_size = drop_ffs(nand, p_buffer,
+					&write_size);
 #endif
 
-			rval = nand_write(nand, offset, &truncated_write_size,
-					p_buffer);
+		rval = nand_write(nand, offset, &truncated_write_size,
+				p_buffer);
 
-			if ((flags & WITH_WR_VERIFY) && !rval)
-				rval = nand_verify(nand, offset,
-					truncated_write_size, p_buffer);
+		if ((flags & WITH_WR_VERIFY) && !rval)
+			rval = nand_verify(nand, offset,
+				truncated_write_size, p_buffer);
 
-			offset += write_size;
-			p_buffer += write_size;
-		}
+		offset += write_size;
+		p_buffer += write_size;
 
 		if (rval != 0) {
 			printf("NAND write to offset %llx failed %d\n",
diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h
index be1750f..3a6e981 100644
--- a/include/configs/M54418TWR.h
+++ b/include/configs/M54418TWR.h
@@ -53,7 +53,6 @@
 #define CONFIG_CMD_MISC
 #define CONFIG_CMD_MII
 #undef CONFIG_CMD_NAND
-#undef CONFIG_CMD_NAND_YAFFS
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index 94078f5..6aee6db 100644
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -62,7 +62,6 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_NAND_YAFFS
 
 #define CONFIG_BOARD_LATE_INIT
 
diff --git a/include/nand.h b/include/nand.h
index 8ea4d5d..d2a53ab 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -104,11 +104,8 @@ typedef struct nand_erase_options nand_erase_options_t;
 int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 		       size_t *actual, loff_t lim, u_char *buffer);
 
-#define WITH_YAFFS_OOB	(1 << 0) /* whether write with yaffs format. This flag
-				  * is a 'mode' meaning it cannot be mixed with
-				  * other flags */
-#define WITH_DROP_FFS	(1 << 1) /* drop trailing all-0xff pages */
-#define WITH_WR_VERIFY	(1 << 2) /* verify data was written correctly */
+#define WITH_DROP_FFS	(1 << 0) /* drop trailing all-0xff pages */
+#define WITH_WR_VERIFY	(1 << 1) /* verify data was written correctly */
 
 int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 			size_t *actual, loff_t lim, u_char *buffer, int flags);
-- 
cgit v0.10.2


From 7653fc288a964ce5bb0cff9176444260731d0f90 Mon Sep 17 00:00:00 2001
From: Stefan Agner <stefan@agner.ch>
Date: Tue, 24 Mar 2015 17:54:19 +0100
Subject: mtd: vf610_nfc: mark page as dirty on block erase

The driver tries to re-use the page buffer by storing the page
number of the current page in the buffer. The page is only read
if the requested page number is not currently in the buffer. When
a block is erased, the page number is marked as invalid if the
erased page equals the one currently in the cache. However, since
a erase block consists of multiple pages, also other page numbers
could be affected.

The commands to reproduce this issue (on a written page):
> nand dump 0x800
> nand erase 0x0 0x20000
> nand dump 0x800

The second nand dump command returns the data from the buffer,
while in fact the page is erased (0xff).

Avoid the hassle to calculate whether the page is affected or not,
but set the page buffer unconditionally to invalid instead.

Signed-off-by: Stefan Agner <stefan@agner.ch>

diff --git a/drivers/mtd/nand/vf610_nfc.c b/drivers/mtd/nand/vf610_nfc.c
index 928d58b..9de971c 100644
--- a/drivers/mtd/nand/vf610_nfc.c
+++ b/drivers/mtd/nand/vf610_nfc.c
@@ -369,8 +369,7 @@ static void vf610_nfc_command(struct mtd_info *mtd, unsigned command,
 		break;
 
 	case NAND_CMD_ERASE1:
-		if (nfc->page == page)
-			nfc->page = -1;
+		nfc->page = -1;
 		vf610_nfc_send_commands(nfc->regs, command,
 					NAND_CMD_ERASE2, ERASE_CMD_CODE);
 		vf610_nfc_addr_cycle(mtd, column, page);
-- 
cgit v0.10.2


From 55765b1842e7dcf22efa8d973c7d1b7498dd99fa Mon Sep 17 00:00:00 2001
From: Stefan Agner <stefan@agner.ch>
Date: Tue, 24 Mar 2015 17:54:20 +0100
Subject: mtd: vf610_nfc: specify transfer size before each transfer

Testing showed, that commands like STATUS made the buffer dirty
when executed with NFC_SECSZ set to the page size. It looks
like the controller transfers bogus data when this register
is configured. When setting it to 0, the buffer does not get
altered while the status command still seems to work flawless.

Signed-off-by: Stefan Agner <stefan@agner.ch>

diff --git a/drivers/mtd/nand/vf610_nfc.c b/drivers/mtd/nand/vf610_nfc.c
index 9de971c..d98dd28 100644
--- a/drivers/mtd/nand/vf610_nfc.c
+++ b/drivers/mtd/nand/vf610_nfc.c
@@ -146,6 +146,7 @@ struct vf610_nfc {
 	void __iomem	  *regs;
 	uint               column;
 	int                spareonly;
+	int		   page_sz;
 	int                page;
 	/* Status and ID are in alternate locations. */
 	int                alt_buf;
@@ -329,6 +330,11 @@ static void vf610_nfc_addr_cycle(struct mtd_info *mtd, int column, int page)
 				    ROW_ADDR_SHIFT, page);
 }
 
+static inline void vf610_nfc_transfer_size(void __iomem *regbase, int size)
+{
+	__raw_writel(size, regbase + NFC_SECTOR_SIZE);
+}
+
 /* Send command to NAND chip */
 static void vf610_nfc_command(struct mtd_info *mtd, unsigned command,
 			      int column, int page)
@@ -342,12 +348,14 @@ static void vf610_nfc_command(struct mtd_info *mtd, unsigned command,
 	switch (command) {
 	case NAND_CMD_PAGEPROG:
 		nfc->page = -1;
+		vf610_nfc_transfer_size(nfc->regs, nfc->page_sz);
 		vf610_nfc_send_commands(nfc->regs, NAND_CMD_SEQIN,
 					command, PROGRAM_PAGE_CMD_CODE);
 		vf610_nfc_addr_cycle(mtd, column, page);
 		break;
 
 	case NAND_CMD_RESET:
+		vf610_nfc_transfer_size(nfc->regs, 0);
 		vf610_nfc_send_command(nfc->regs, command, RESET_CMD_CODE);
 		break;
 	/*
@@ -363,6 +371,7 @@ static void vf610_nfc_command(struct mtd_info *mtd, unsigned command,
 		if (nfc->page == page)
 			return;
 		nfc->page = page;
+		vf610_nfc_transfer_size(nfc->regs, nfc->page_sz);
 		vf610_nfc_send_commands(nfc->regs, NAND_CMD_READ0,
 					NAND_CMD_READSTART, READ_PAGE_CMD_CODE);
 		vf610_nfc_addr_cycle(mtd, column, page);
@@ -370,6 +379,7 @@ static void vf610_nfc_command(struct mtd_info *mtd, unsigned command,
 
 	case NAND_CMD_ERASE1:
 		nfc->page = -1;
+		vf610_nfc_transfer_size(nfc->regs, 0);
 		vf610_nfc_send_commands(nfc->regs, command,
 					NAND_CMD_ERASE2, ERASE_CMD_CODE);
 		vf610_nfc_addr_cycle(mtd, column, page);
@@ -377,11 +387,13 @@ static void vf610_nfc_command(struct mtd_info *mtd, unsigned command,
 
 	case NAND_CMD_READID:
 		nfc->alt_buf = ALT_BUF_ID;
+		vf610_nfc_transfer_size(nfc->regs, 0);
 		vf610_nfc_send_command(nfc->regs, command, READ_ID_CMD_CODE);
 		break;
 
 	case NAND_CMD_STATUS:
 		nfc->alt_buf = ALT_BUF_STAT;
+		vf610_nfc_transfer_size(nfc->regs, 0);
 		vf610_nfc_send_command(nfc->regs, command,
 				       STATUS_READ_CMD_CODE);
 		break;
@@ -579,7 +591,6 @@ static int vf610_nfc_nand_init(int devnum, void __iomem *addr)
 	struct nand_chip *chip;
 	struct vf610_nfc *nfc;
 	int err = 0;
-	int page_sz;
 	struct vf610_nfc_config cfg = {
 		.hardware_ecc = 1,
 #ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT
@@ -633,9 +644,8 @@ static int vf610_nfc_nand_init(int devnum, void __iomem *addr)
 	chip->bbt_td = &bbt_main_descr;
 	chip->bbt_md = &bbt_mirror_descr;
 
-	page_sz = PAGE_2K + OOB_64;
-	page_sz += cfg.width == 16 ? 1 : 0;
-	vf610_nfc_write(mtd, NFC_SECTOR_SIZE, page_sz);
+	nfc->page_sz = PAGE_2K + OOB_64;
+	nfc->page_sz += cfg.width == 16 ? 1 : 0;
 
 	/* Set configuration register. */
 	vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_ADDR_AUTO_INCR_BIT);
@@ -664,16 +674,15 @@ static int vf610_nfc_nand_init(int devnum, void __iomem *addr)
 
 	chip->ecc.mode = NAND_ECC_SOFT; /* default */
 
-	page_sz = mtd->writesize + mtd->oobsize;
+	nfc->page_sz = mtd->writesize + mtd->oobsize;
 
 	/* Single buffer only, max 256 OOB minus ECC status */
-	if (page_sz > PAGE_2K + 256 - 8) {
+	if (nfc->page_sz > PAGE_2K + 256 - 8) {
 		dev_err(nfc->dev, "Unsupported flash size\n");
 		err = -ENXIO;
 		goto error;
 	}
-	page_sz += cfg.width == 16 ? 1 : 0;
-	vf610_nfc_write(mtd, NFC_SECTOR_SIZE, page_sz);
+	nfc->page_sz += cfg.width == 16 ? 1 : 0;
 
 	if (cfg.hardware_ecc) {
 		if (mtd->writesize != PAGE_2K && mtd->oobsize < 64) {
-- 
cgit v0.10.2