From f84269c5c0ac3944532fce6fcadaeb7912d014e8 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 9 Jun 2014 11:36:58 +0200 Subject: sunxi: Add sun5i support Add support for the Allwinner A13 and A10s SoCs also know as the Allwinner sun5i family, and the A13-OLinuXinoM A13 based and r7-tv-dongle A10s based boards. The only differences compared to the already supported sun4i and sun7i families are all in the DRAM controller initialization: -Different hcpr values -Different MBUS settings -Some other small initialization changes Signed-off-by: Henrik Nordstrom Signed-off-by: Stefan Roese Signed-off-by: Oliver Schinagl Signed-off-by: Hans de Goede Acked-by: Ian Campbell diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile index 856d353..6c70639 100644 --- a/arch/arm/cpu/armv7/sunxi/Makefile +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -12,6 +12,7 @@ obj-y += board.o obj-y += clock.o obj-y += pinmux.o obj-$(CONFIG_SUN4I) += clock_sun4i.o +obj-$(CONFIG_SUN5I) += clock_sun4i.o obj-$(CONFIG_SUN7I) += clock_sun4i.o ifndef CONFIG_SPL_BUILD @@ -20,6 +21,7 @@ endif ifdef CONFIG_SPL_BUILD obj-$(CONFIG_SUN4I) += dram.o +obj-$(CONFIG_SUN5I) += dram.o obj-$(CONFIG_SUN7I) += dram.o ifdef CONFIG_SPL_FEL obj-y += start.o diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index c80b421..0118f5b 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -47,9 +47,21 @@ u32 spl_boot_mode(void) int gpio_init(void) { +#if CONFIG_CONS_INDEX == 1 && (defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I)) sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB22_UART0_TX); sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB23_UART0_RX); sunxi_gpio_set_pull(SUNXI_GPB(23), 1); +#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_SUN5I) + sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN5I_GPB19_UART0_TX); + sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN5I_GPB20_UART0_RX); + sunxi_gpio_set_pull(SUNXI_GPB(20), 1); +#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_SUN5I) + sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG3_UART1_TX); + sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG4_UART1_RX); + sunxi_gpio_set_pull(SUNXI_GPG(4), 1); +#else +#error Unsupported console port number. Please fix pin mux settings in board.c +#endif return 0; } diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c b/arch/arm/cpu/armv7/sunxi/cpu_info.c index b4b5089..5cf35ac 100644 --- a/arch/arm/cpu/armv7/sunxi/cpu_info.c +++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c @@ -15,6 +15,14 @@ int print_cpuinfo(void) { #ifdef CONFIG_SUN4I puts("CPU: Allwinner A10 (SUN4I)\n"); +#elif defined CONFIG_SUN5I + u32 val = readl(SUNXI_SID_BASE + 0x08); + switch ((val >> 12) & 0xf) { + case 0: puts("CPU: Allwinner A12 (SUN5I)\n"); break; + case 3: puts("CPU: Allwinner A13 (SUN5I)\n"); break; + case 7: puts("CPU: Allwinner A10s (SUN5I)\n"); break; + default: puts("CPU: Allwinner A1X (SUN5I)\n"); + } #elif defined CONFIG_SUN7I puts("CPU: Allwinner A20 (SUN7I)\n"); #else diff --git a/arch/arm/cpu/armv7/sunxi/dram.c b/arch/arm/cpu/armv7/sunxi/dram.c index 1de7529..0f1ceec 100644 --- a/arch/arm/cpu/armv7/sunxi/dram.c +++ b/arch/arm/cpu/armv7/sunxi/dram.c @@ -155,6 +155,16 @@ static void mctl_enable_dllx(u32 phase) } static u32 hpcr_value[32] = { +#ifdef CONFIG_SUN5I + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0x1031, 0x1031, 0x0735, 0x1035, + 0x1035, 0x0731, 0x1031, 0, + 0x0301, 0x0301, 0x0301, 0x0301, + 0x0301, 0x0301, 0x0301, 0 +#endif #ifdef CONFIG_SUN4I 0x0301, 0x0301, 0x0301, 0x0301, 0x0301, 0x0301, 0, 0, @@ -257,9 +267,15 @@ static void mctl_setup_dram_clock(u32 clk) #if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I) /* setup MBUS clock */ reg_val = CCM_MBUS_CTRL_GATE | +#ifdef CONFIG_SUN7I CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL6) | CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(2)) | CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(2)); +#else /* defined(CONFIG_SUN5I) */ + CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL5) | + CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(1)) | + CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(2)); +#endif writel(reg_val, &ccm->mbus_clk_cfg); #endif @@ -468,6 +484,11 @@ unsigned long dramc_init(struct dram_para *para) /* setup DRAM relative clock */ mctl_setup_dram_clock(para->clock); +#ifdef CONFIG_SUN5I + /* Disable any pad power save control */ + writel(0, &dram->ppwrsctl); +#endif + /* reset external DRAM */ #ifndef CONFIG_SUN7I mctl_ddr3_reset(); diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile index 4902d70..7083632 100644 --- a/board/sunxi/Makefile +++ b/board/sunxi/Makefile @@ -10,5 +10,7 @@ # obj-y += board.o obj-$(CONFIG_SUNXI_GMAC) += gmac.o +obj-$(CONFIG_A13_OLINUXINOM) += dram_a13_oli_micro.o obj-$(CONFIG_CUBIEBOARD) += dram_cubieboard.o obj-$(CONFIG_CUBIETRUCK) += dram_cubietruck.o +obj-$(CONFIG_R7DONGLE) += dram_r7dongle.o diff --git a/board/sunxi/dram_a13_oli_micro.c b/board/sunxi/dram_a13_oli_micro.c new file mode 100644 index 0000000..8154ea2 --- /dev/null +++ b/board/sunxi/dram_a13_oli_micro.c @@ -0,0 +1,32 @@ +/* this file is generated, don't edit it yourself */ + +#include +#include + +static struct dram_para dram_para = { + .clock = 408, + .type = 3, + .rank_num = 1, + .density = 2048, + .io_width = 16, + .bus_width = 16, + .cas = 9, + .zq = 123, + .odt_en = 0, + .size = 256, + .tpr0 = 0x42d899b7, + .tpr1 = 0xa090, + .tpr2 = 0x22a00, + .tpr3 = 0, + .tpr4 = 0, + .tpr5 = 0, + .emr1 = 0, + .emr2 = 0x10, + .emr3 = 0, + +}; + +unsigned long sunxi_dram_init(void) +{ + return dramc_init(&dram_para); +} diff --git a/board/sunxi/dram_r7dongle.c b/board/sunxi/dram_r7dongle.c new file mode 100644 index 0000000..59343cb --- /dev/null +++ b/board/sunxi/dram_r7dongle.c @@ -0,0 +1,31 @@ +/* this file is generated, don't edit it yourself */ + +#include +#include + +static struct dram_para dram_para = { + .clock = 384, + .type = 3, + .rank_num = 1, + .density = 2048, + .io_width = 8, + .bus_width = 32, + .cas = 9, + .zq = 123, + .odt_en = 0, + .size = 1024, + .tpr0 = 0x42d899b7, + .tpr1 = 0xa090, + .tpr2 = 0x22a00, + .tpr3 = 0, + .tpr4 = 0, + .tpr5 = 0, + .emr1 = 0x04, + .emr2 = 0x10, + .emr3 = 0, +}; + +unsigned long sunxi_dram_init(void) +{ + return dramc_init(&dram_para); +} diff --git a/boards.cfg b/boards.cfg index af24128..20ad488 100644 --- a/boards.cfg +++ b/boards.cfg @@ -377,9 +377,11 @@ Active arm armv7 rmobile renesas lager Active arm armv7 s5pc1xx samsung goni s5p_goni - Robert Baldyga Active arm armv7 s5pc1xx samsung smdkc100 smdkc100 - Minkyu Kang Active arm armv7 socfpga altera socfpga socfpga_cyclone5 - - +Active arm armv7 sunxi - sunxi A13-OLinuXinoM sun5i:A13_OLINUXINOM,SPL,CONS_INDEX=2 Hans de Goede Active arm armv7 sunxi - sunxi Cubieboard sun4i:CUBIEBOARD,SPL Hans de Goede Active arm armv7 sunxi - sunxi Cubietruck sun7i:CUBIETRUCK,SPL,SUNXI_GMAC,RGMII - Active arm armv7 sunxi - sunxi Cubietruck_FEL sun7i:CUBIETRUCK,SPL_FEL,SUNXI_GMAC,RGMII - +Active arm armv7 sunxi - sunxi r7-tv-dongle sun5i:R7DONGLE,SPL Hans de Goede Active arm armv7 u8500 st-ericsson snowball snowball - Mathieu Poirier Active arm armv7 u8500 st-ericsson u8500 u8500_href - - Active arm armv7 vf610 freescale vf610twr vf610twr vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg Alison Wang diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h new file mode 100644 index 0000000..43f0d67 --- /dev/null +++ b/include/configs/sun5i.h @@ -0,0 +1,23 @@ +/* + * (C) Copyright 2012-2013 Henrik Nordstrom + * + * Configuration settings for the Allwinner A13 (sun5i) CPU + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_SUN5I /* sun5i SoC generation */ + +#define CONFIG_SYS_PROMPT "sun5i# " + +/* + * Include common sunxi configuration where most the settings are + */ +#include + +#endif /* __CONFIG_H */ diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index fd02d0d..1d1c87d 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -161,7 +161,9 @@ #undef CONFIG_CMD_NET #undef CONFIG_CMD_NFS +#ifndef CONFIG_CONS_INDEX #define CONFIG_CONS_INDEX 1 /* UART0 */ +#endif #ifdef CONFIG_SUNXI_GMAC #define CONFIG_DESIGNWARE_ETH /* GMAC can use designware driver */ -- cgit v0.10.2