From 891235366d9949b4b21653e93b97dd8931314153 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 23 Jan 2015 00:24:17 +0900 Subject: powerpc: mpc85xx: remove P2020COME board support This board is still a non-generic board. Signed-off-by: Masahiro Yamada Cc: Ira W. Snyder diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 009d830..e643f91 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -93,9 +93,6 @@ config TARGET_P1_P2_RDB_PC config TARGET_P1_TWR bool "Support p1_twr" -config TARGET_P2020COME - bool "Support P2020COME" - config TARGET_P2020DS bool "Support P2020DS" @@ -181,7 +178,6 @@ source "board/freescale/p1022ds/Kconfig" source "board/freescale/p1023rdb/Kconfig" source "board/freescale/p1_p2_rdb_pc/Kconfig" source "board/freescale/p1_twr/Kconfig" -source "board/freescale/p2020come/Kconfig" source "board/freescale/p2020ds/Kconfig" source "board/freescale/p2041rdb/Kconfig" source "board/freescale/qemu-ppce500/Kconfig" diff --git a/board/freescale/p2020come/Kconfig b/board/freescale/p2020come/Kconfig deleted file mode 100644 index 8ce5cf1..0000000 --- a/board/freescale/p2020come/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_P2020COME - -config SYS_BOARD - default "p2020come" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "P2020COME" - -endif diff --git a/board/freescale/p2020come/MAINTAINERS b/board/freescale/p2020come/MAINTAINERS deleted file mode 100644 index ab3ef94..0000000 --- a/board/freescale/p2020come/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -P2020COME BOARD -M: Ira W. Snyder -S: Maintained -F: board/freescale/p2020come/ -F: include/configs/P2020COME.h -F: configs/P2020COME_SDCARD_defconfig -F: configs/P2020COME_SPIFLASH_defconfig diff --git a/board/freescale/p2020come/Makefile b/board/freescale/p2020come/Makefile deleted file mode 100644 index 4857136..0000000 --- a/board/freescale/p2020come/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# Copyright 2009 Freescale Semiconductor, Inc. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += p2020come.o -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o diff --git a/board/freescale/p2020come/ddr.c b/board/freescale/p2020come/ddr.c deleted file mode 100644 index b642e12..0000000 --- a/board/freescale/p2020come/ddr.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright 2009, 2011 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include - -#include -#include - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - if (ctrl_num) { - printf("Wrong parameter for controller number %d", ctrl_num); - return; - } - - if (!pdimm->n_ranks) - return; - - /* - * Set DDR_SDRAM_CLK_CNTL = 0x02800000 - * - * Clock is launched 5/8 applied cycle after address/command - */ - popts->clk_adjust = 5; -} diff --git a/board/freescale/p2020come/law.c b/board/freescale/p2020come/law.c deleted file mode 100644 index 7048a08..0000000 --- a/board/freescale/p2020come/law.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright 2009 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -/* - * Create a dummy LAW entry for the DDR SDRAM which will be replaced when - * the DDR SPD setup code runs. - * - * This table would be empty, except that it is used before the BSS section is - * initialized, and therefore must have at least one entry to push it into - * the DATA section. - */ -struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_SDRAM_BASE, LAW_SIZE_4K, LAW_TRGT_IF_DDR), -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/p2020come/p2020come.c b/board/freescale/p2020come/p2020come.c deleted file mode 100644 index 1db37e3..0000000 --- a/board/freescale/p2020come/p2020come.c +++ /dev/null @@ -1,275 +0,0 @@ -/* - * Copyright 2009,2012 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#if defined(CONFIG_PCI) -#include -#include -#endif - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_PCI) -void pci_init_board(void) -{ - fsl_pcie_init_board(0); -} - -void ft_pci_board_setup(void *blob) -{ - FT_FSL_PCI_SETUP; -} -#endif - -#define BOARD_PERI_RST_SET (VSC7385_RST_SET | SLIC_RST_SET | \ - SGMII_PHY_RST_SET | PCIE_RST_SET | \ - RGMII_PHY_RST_SET) - -#define SYSCLK_MASK 0x00200000 -#define BOARDREV_MASK 0x10100000 -#define BOARDREV_B 0x10100000 -#define BOARDREV_C 0x00100000 -#define BOARDREV_D 0x00000000 - -#define SYSCLK_66 66666666 -#define SYSCLK_50 50000000 -#define SYSCLK_100 100000000 - -unsigned long get_board_sys_clk(ulong dummy) -{ - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - u32 ddr_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO; - - ddr_ratio >>= MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; - switch (ddr_ratio) { - case 0x0C: - return SYSCLK_66; - case 0x0A: - case 0x08: - return SYSCLK_100; - default: - puts("ERROR: unknown DDR ratio\n"); - return SYSCLK_100; - } -} - -unsigned long get_board_ddr_clk(ulong dummy) -{ - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - u32 ddr_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO; - - ddr_ratio >>= MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; - switch (ddr_ratio) { - case 0x0C: - case 0x0A: - return SYSCLK_66; - case 0x08: - return SYSCLK_100; - default: - puts("ERROR: unknown DDR ratio\n"); - return SYSCLK_100; - } -} - -#ifdef CONFIG_MMC -int board_early_init_f(void) -{ - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - - setbits_be32(&gur->pmuxcr, - (MPC85xx_PMUXCR_SDHC_CD | - MPC85xx_PMUXCR_SDHC_WP)); - - /* All the device are enable except for SRIO12 */ - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_SRIO); - return 0; -} -#endif - -#define GPIO_DIR 0x0f3a0000 -#define GPIO_ODR 0x00000000 -#define GPIO_DAT 0x001a0000 - -int checkboard(void) -{ - ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR + 0xC00); - - /* - * GPIO - * 0 - 3: CarryBoard Input; - * 4 - 7: CarryBoard Output; - * 8 : Mux as SDHC_CD (card detection) - * 9 : Mux as SDHC_WP - * 10 : Clear Watchdog timer - * 11 : LED Input - * 12 : Output to 1 - * 13 : Open Drain - * 14 : LED Output - * 15 : Switch Input - * - * Set GPIOs 11, 12, 14 to 1. - */ - out_be32(&pgpio->gpodr, GPIO_ODR); - mpc85xx_gpio_set(0xffffffff, GPIO_DIR, GPIO_DAT); - - puts("Board: Freescale COM Express P2020\n"); - return 0; -} - -#define M41ST85W_I2C_BUS 1 -#define M41ST85W_I2C_ADDR 0x68 -#define M41ST85W_ERROR(fmt, args...) printf("ERROR: M41ST85W: " fmt, ##args) - -static void m41st85w_clear_bit(u8 reg, u8 mask, const char *name) -{ - u8 data; - - if (i2c_read(M41ST85W_I2C_ADDR, reg, 1, &data, 1)) { - M41ST85W_ERROR("unable to read %s bit\n", name); - return; - } - - if (data & mask) { - data &= ~mask; - if (i2c_write(M41ST85W_I2C_ADDR, reg, 1, &data, 1)) { - M41ST85W_ERROR("unable to clear %s bit\n", name); - return; - } - } -} - -#define M41ST85W_REG_SEC2 0x01 -#define M41ST85W_REG_SEC2_ST 0x80 - -#define M41ST85W_REG_ALHOUR 0x0c -#define M41ST85W_REG_ALHOUR_HT 0x40 - -/* - * The P2020COME board has a STMicro M41ST85W RTC/watchdog - * at i2c bus 1 address 0x68. - */ -static void start_rtc(void) -{ - unsigned int bus = i2c_get_bus_num(); - - if (i2c_set_bus_num(M41ST85W_I2C_BUS)) { - M41ST85W_ERROR("unable to set i2c bus\n"); - goto out; - } - - /* ensure ST (stop) and HT (halt update) bits are cleared */ - m41st85w_clear_bit(M41ST85W_REG_SEC2, M41ST85W_REG_SEC2_ST, "ST"); - m41st85w_clear_bit(M41ST85W_REG_ALHOUR, M41ST85W_REG_ALHOUR_HT, "HT"); - -out: - /* reset the i2c bus */ - i2c_set_bus_num(bus); -} - -int board_early_init_r(void) -{ - start_rtc(); - return 0; -} - -#define M41ST85W_REG_WATCHDOG 0x09 -#define M41ST85W_REG_WATCHDOG_WDS 0x80 -#define M41ST85W_REG_WATCHDOG_BMB0 0x04 - -void board_reset(void) -{ - u8 data = M41ST85W_REG_WATCHDOG_WDS | M41ST85W_REG_WATCHDOG_BMB0; - - /* set the hardware watchdog timeout to 1/16 second, then hang */ - i2c_set_bus_num(M41ST85W_I2C_BUS); - i2c_write(M41ST85W_I2C_ADDR, M41ST85W_REG_WATCHDOG, 1, &data, 1); - - while (1) - /* hang */; -} - -#ifdef CONFIG_TSEC_ENET -int board_eth_init(bd_t *bis) -{ - struct fsl_pq_mdio_info mdio_info; - struct tsec_info_struct tsec_info[4]; - int num = 0; - -#ifdef CONFIG_TSEC1 - SET_STD_TSEC_INFO(tsec_info[num], 1); - num++; -#endif -#ifdef CONFIG_TSEC2 - SET_STD_TSEC_INFO(tsec_info[num], 2); - num++; -#endif -#ifdef CONFIG_TSEC3 - SET_STD_TSEC_INFO(tsec_info[num], 3); - if (is_serdes_configured(SGMII_TSEC3)) { - puts("eTSEC3 is in sgmii mode."); - tsec_info[num].flags |= TSEC_SGMII; - } - num++; -#endif - if (!num) { - printf("No TSECs initialized\n"); - return 0; - } - - mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; - mdio_info.name = DEFAULT_MII_NAME; - fsl_pq_mdio_init(bis, &mdio_info); - - tsec_eth_init(bis, tsec_info, num); - - return pci_eth_init(bis); -} -#endif - -#if defined(CONFIG_OF_BOARD_SETUP) -int ft_board_setup(void *blob, bd_t *bd) -{ - phys_addr_t base; - phys_size_t size; - - ft_cpu_setup(blob, bd); - - base = getenv_bootm_low(); - size = getenv_bootm_size(); - -#if defined(CONFIG_PCI) - ft_pci_board_setup(blob); -#endif - - fdt_fixup_memory(blob, (u64)base, (u64)size); - -#ifdef CONFIG_HAS_FSL_DR_USB - fdt_fixup_dr_usb(blob, bd); -#endif - - return 0; -} -#endif diff --git a/board/freescale/p2020come/tlb.c b/board/freescale/p2020come/tlb.c deleted file mode 100644 index 08a1e34..0000000 --- a/board/freescale/p2020come/tlb.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -struct fsl_e_tlb_entry tlb_table[] = { - /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, - CONFIG_SYS_INIT_RAM_ADDR_PHYS, - MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, - MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, - MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, - MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - /* TLB 1 */ - /* *I*** - Covers boot page */ - SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_4K, 1), - - /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_1M, 1), - -#if defined(CONFIG_PCI) - /* *I*G* - PCI3 - PCI2 0x8000,0000 - 0xbfff,ffff, size = 1G */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS, - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 2, BOOKE_PAGESZ_1G, 1), - - /* *I*G* - PCI1 0xC000,0000 - 0xcfff,ffff, size = 256M */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_VIRT, - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_256M, 1), - - /* *I*G* - PCI1 0xD000,0000 - 0xDFFF,FFFF, size = 256M */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x10000000, - CONFIG_SYS_PCIE1_MEM_PHYS + 0x10000000, - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_256M, 1), - - /* - * *I*G* - PCI I/O - * - * PCI3 => 0xFFC10000 - * PCI2 => 0xFFC2,0000 - * PCI1 => 0xFFC3,0000 - */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_VIRT, CONFIG_SYS_PCIE3_IO_PHYS, - MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 5, BOOKE_PAGESZ_256K, 1), -#endif /* #if defined(CONFIG_PCI) */ - -#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR) - /* *I*G - DDR3 2G Part 1: 0 - 0x3fff,ffff , size = 1G */ - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 6, BOOKE_PAGESZ_256K, 1), - - /* DDR3 2G Part 2: 0x4000,0000 - 0x7fff,ffff , size = 1G */ - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000, - CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 7, BOOKE_PAGESZ_256K, 1), -#endif -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/configs/P2020COME_SDCARD_defconfig b/configs/P2020COME_SDCARD_defconfig deleted file mode 100644 index c186fcb..0000000 --- a/configs/P2020COME_SDCARD_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="SDCARD" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P2020COME=y diff --git a/configs/P2020COME_SPIFLASH_defconfig b/configs/P2020COME_SPIFLASH_defconfig deleted file mode 100644 index 17ce136..0000000 --- a/configs/P2020COME_SPIFLASH_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_P2020COME=y diff --git a/doc/README.scrapyard b/doc/README.scrapyard index f436a8e..5733c5a 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +P2020COME powerpc mpc85xx - - Ira W. Snyder P2020RDB powerpc mpc85xx - - Poonam Aggrwal P2010RDB powerpc mpc85xx - - P1020RDB powerpc mpc85xx - - diff --git a/include/configs/P2020COME.h b/include/configs/P2020COME.h deleted file mode 100644 index d414b84..0000000 --- a/include/configs/P2020COME.h +++ /dev/null @@ -1,547 +0,0 @@ -/* - * Copyright 2009-2010,2012 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* The P2020COME board is only booted via the Freescale On-Chip ROM */ -#define CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_EXTRA_ENV_RELOC - -#define CONFIG_SYS_TEXT_BASE 0xf8f80000 -#define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc - -#ifdef CONFIG_SDCARD -#define CONFIG_RAMBOOT_SDCARD 1 -#endif - -#ifdef CONFIG_SPIFLASH -#define CONFIG_RAMBOOT_SPIFLASH 1 -#endif - -#ifndef CONFIG_SYS_MONITOR_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif - -/* High Level Configuration Options */ -#define CONFIG_BOOKE 1 /* BOOKE */ -#define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_P2020 1 -#define CONFIG_P2020COME 1 -#define CONFIG_FSL_ELBC 1 /* Enable eLBC Support */ -#define CONFIG_MP - -#define CONFIG_PCI 1 /* Enable PCI/PCIE */ -#if defined(CONFIG_PCI) -#define CONFIG_PCIE1 1 /* PCIE controller 1 (slot 1) */ -#define CONFIG_PCIE2 1 /* PCIE controller 2 (slot 2) */ -#define CONFIG_PCIE3 1 /* PCIE controller 3 (slot 3) */ - -#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ -#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ -#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ -#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ -#endif /* #if defined(CONFIG_PCI) */ -#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ -#define CONFIG_TSEC_ENET /* tsec ethernet support */ -#define CONFIG_ENV_OVERWRITE - -#if defined(CONFIG_PCI) -#define CONFIG_E1000 1 /* E1000 pci Ethernet card */ -#endif - -#ifndef __ASSEMBLY__ -extern unsigned long get_board_ddr_clk(unsigned long dummy); -extern unsigned long get_board_sys_clk(unsigned long dummy); -#endif - -/* - * For P2020COME DDRCLK and SYSCLK are from the same oscillator - * For DA phase the SYSCLK is 66MHz - * For EA phase the SYSCLK is 100MHz - */ -#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk(0) -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) - -#define CONFIG_HWCONFIG - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch prediction */ - -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ - -#define CONFIG_ENABLE_36BIT_PHYS 1 - -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_ADDR_MAP 1 -#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ -#endif - -#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x1fffffff -#define CONFIG_PANIC_HANG /* do not reset board on panic */ - - /* - * Config the L2 Cache as L2 SRAM - */ -#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8f80000ull -#else -#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR -#endif -#define CONFIG_SYS_L2_SIZE (512 << 10) -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR \ - + CONFIG_SYS_L2_SIZE) - -#define CONFIG_SYS_CCSRBAR 0xffe00000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR - -/* DDR Setup */ -#define CONFIG_SYS_FSL_DDR3 -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ -#define CONFIG_DDR_SPD - -#define CONFIG_DDR_ECC -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef - -#define CONFIG_SYS_SDRAM_SIZE 2048ULL /* DDR size on P2020COME */ -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE - -#define CONFIG_NUM_DDR_CONTROLLERS 1 -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 2 - -#define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d -#define CONFIG_SYS_DDR_ERR_DIS 0x00000000 -#define CONFIG_SYS_DDR_SBE 0x00ff0000 - -#define CONFIG_SYS_SPD_BUS_NUM 1 -#define SPD_EEPROM_ADDRESS 0x53 - -/* - * Memory map - * - * 0x0000_0000 0x7fff_ffff DDR3 2G Cacheable - * 0x8000_0000 0x9fff_ffff PCI Express 3 Mem 1G non-cacheable - * 0xa000_0000 0xbfff_ffff PCI Express 2 Mem 1G non-cacheable - * 0xc000_0000 0xdfff_ffff PCI Express 1 Mem 1G non-cacheable - * 0xffc1_0000 0xffc1_ffff PCI Express 3 IO 64K non-cacheable - * 0xffc2_0000 0xffc2_ffff PCI Express 2 IO 64K non-cacheable - * 0xffc3_0000 0xffc3_ffff PCI Express 1 IO 64K non-cacheable - * - * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 - * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable - */ - -/* - * Local Bus Definitions - */ - -/* There is no NOR Flash on P2020COME */ -#define CONFIG_SYS_NO_FLASH - -#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ -#define CONFIG_HWCONFIG - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR -/* the assembler doesn't like typecast */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ - ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ - CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) -#else -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS -#endif -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ - - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) - -/* Serial Port - controlled on board with jumper J8 - * open - index 2 - * shorted - index 1 - */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - -/* - * Pass open firmware flat tree - */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#define CONFIG_OF_STDOUT_VIA_ALIAS 1 - -/* new uImage format support */ -#define CONFIG_FIT 1 -#define CONFIG_FIT_VERBOSE 1 - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} } - -/* - * I2C2 EEPROM - */ -#define CONFIG_ID_EEPROM -#ifdef CONFIG_ID_EEPROM -#define CONFIG_SYS_I2C_EEPROM_NXID -#endif -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR2 0x18 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_BUS_NUM 0 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ - -/* - * eSPI - Enhanced SPI - */ -#define CONFIG_FSL_ESPI -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_CMD_SF -#define CONFIG_SF_DEFAULT_SPEED 10000000 -#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 - -/* - * General PCI - * Memory space is mapped 1-1, but I/O space must start from 0. - */ -#if defined(CONFIG_PCI) - -/* controller 3, Slot 3, tgtid 3, Base address 8000 */ -#define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000 -#define CONFIG_SYS_PCIE3_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCIE3_MEM_PHYS 0x80000000 -#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE3_IO_VIRT 0xffc10000 -#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE3_IO_PHYS 0xffc10000 -#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ - -/* controller 2, Slot 2, tgtid 2, Base address 9000 */ -#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 -#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 -#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc20000 -#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc20000 -#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ - -/* controller 1, Slot 1, tgtid 1, Base address a000 */ -#define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 -#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc30000 -#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc30000 -#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ - -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - -#undef CONFIG_EEPRO100 -#undef CONFIG_TULIP -#undef CONFIG_RTL8139 - -#ifdef CONFIG_RTL8139 -/* This macro is used by RTL8139 but not defined in PPC architecture */ -#define KSEG1ADDR(x) (x) -#define _IO_BASE 0x00000000 -#endif - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_DOS_PARTITION - -#endif /* CONFIG_PCI */ - -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC2" -#define CONFIG_TSEC3 1 -#define CONFIG_TSEC3_NAME "eTSEC3" - -#define TSEC1_PHY_ADDR 0 -#define TSEC2_PHY_ADDR 2 -#define TSEC3_PHY_ADDR 1 - -#undef CONFIG_VSC7385_ENET - -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC3_PHYIDX 0 - -#define CONFIG_ETHPRIME "eTSEC1" - -#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ - -#endif /* CONFIG_TSEC_ENET */ - -/* - * Environment - */ -#if defined(CONFIG_RAMBOOT_SDCARD) - #define CONFIG_ENV_IS_IN_MMC 1 - #define CONFIG_FSL_FIXED_MMC_LOCATION - #define CONFIG_ENV_SIZE 0x2000 - #define CONFIG_SYS_MMC_ENV_DEV 0 -#elif defined(CONFIG_RAMBOOT_SPIFLASH) - #define CONFIG_ENV_IS_IN_SPI_FLASH - #define CONFIG_ENV_SPI_BUS 0 - #define CONFIG_ENV_SPI_CS 0 - #define CONFIG_ENV_SPI_MAX_HZ 10000000 - #define CONFIG_ENV_SPI_MODE 0 - #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ - #define CONFIG_ENV_SECT_SIZE 0x10000 - #define CONFIG_ENV_SIZE 0x2000 -#endif - -#define CONFIG_LOADS_ECHO 1 -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SETEXPR -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_NET -#define CONFIG_CMD_PCI -#endif - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#define CONFIG_MMC 1 - -#ifdef CONFIG_MMC -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ -#define CONFIG_CMD_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_FSL_ESDHC -#define CONFIG_GENERIC_MMC -#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR -#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT -#endif /* CONFIG_MMC */ - -#define CONFIG_HAS_FSL_DR_USB -#ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI - -#ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_USB_EHCI_FSL -#define CONFIG_USB_STORAGE -#endif -#endif - -#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_DOS_PARTITION -#endif - -/* Misc Extra Settings */ -#define CONFIG_CMD_DHCP 1 - -#define CONFIG_CMD_DATE 1 -#define CONFIG_RTC_M41T62 1 -#define CONFIG_SYS_RTC_BUS_NUM 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) - /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 64 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) -#define CONFIG_SYS_BOOTM_LEN (64 << 20) - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -/* - * Environment Configuration - */ - -/* The mac addresses for all ethernet interface */ -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 -#define CONFIG_HAS_ETH3 -#endif - -#define CONFIG_HOSTNAME unknown -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_UBOOTPATH u-boot.bin - -/* default location for tftp and bootm */ -#define CONFIG_LOADADDR 1000000 - -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:ecc=on\0" \ - "bootcmd=run sdboot\0" \ - "sdboot=setenv bootargs root=/dev/mmcblk0p2 rw " \ - "rootdelay=$rootdelaysecond console=$consoledev,$baudrate "\ - "$othbootargs; mmcinfo; " \ - "ext2load mmc 0:2 $loadaddr /boot/$bootfile; " \ - "ext2load mmc 0:2 $fdtaddr /boot/$fdtfile; " \ - "bootm $loadaddr - $fdtaddr\0" \ - "sdfatboot=setenv bootargs root=/dev/ram rw " \ - "rootdelay=$rootdelaysecond console=$consoledev,$baudrate "\ - "$othbootargs; mmcinfo; " \ - "fatload mmc 0:1 $loadaddr $bootfile; " \ - "fatload mmc 0:1 $fdtaddr $fdtfile; " \ - "fatload mmc 0:1 $ramdiskaddr $ramdiskfile; " \ - "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ - "usbboot=setenv bootargs root=/dev/sda1 rw " \ - "rootdelay=$rootdelaysecond console=$consoledev,$baudrate "\ - "$othbootargs; " \ - "usb start; " \ - "ext2load usb 0:1 $loadaddr /boot/$bootfile; " \ - "ext2load usb 0:1 $fdtaddr /boot/$fdtfile; " \ - "bootm $loadaddr - $fdtaddr\0" \ - "usbfatboot=setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs; " \ - "usb start; " \ - "fatload usb 0:2 $loadaddr $bootfile; " \ - "fatload usb 0:2 $fdtaddr $fdtfile; " \ - "fatload usb 0:2 $ramdiskaddr $ramdiskfile; " \ - "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ - "usbext2boot=setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs; " \ - "usb start; " \ - "ext2load usb 0:4 $loadaddr $bootfile; " \ - "ext2load usb 0:4 $fdtaddr $fdtfile; " \ - "ext2load usb 0:4 $ramdiskaddr $ramdiskfile; " \ - "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ - "upgradespi=sf probe 0; " \ - "setenv startaddr 0; " \ - "setenv erasesize a0000; " \ - "tftp 1000000 $tftppath/$uboot_spi; " \ - "sf erase $startaddr $erasesize; " \ - "sf write 1000000 $startaddr $filesize; " \ - "sf erase 100000 120000\0" \ - "clearspienv=sf probe 0;sf erase 100000 20000\0" \ - "othbootargs=ramdisk_size=700000 cache-sram-size=0x10000\0" \ - "netdev=eth0\0" \ - "rootdelaysecond=15\0" \ - "uboot_nor=u-boot-nor.bin\0" \ - "uboot_spi=u-boot-p2020.spi\0" \ - "uboot_sd=u-boot-p2020.bin\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=2000000\0" \ - "ramdiskfile=rootfs-dev.ext2.img\0" \ - "fdtaddr=c00000\0" \ - "fdtfile=uImage-2.6.32-p2020.dtb\0" \ - "tftppath=p2020\0" - -#define CONFIG_HDBOOT \ - "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "usb start;" \ - "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ - "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "\ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $tftppath/$bootfile;" \ - "tftp $fdtaddr $tftppath/$fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $tftppath/$ramdiskfile;" \ - "tftp $loadaddr $tftppath/$bootfile;" \ - "tftp $fdtaddr $tftppath/$fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_HDBOOT - -#endif /* __CONFIG_H */ -- cgit v0.10.2