From 930590f3e49c8f32256edf2e5861e1535a329c6c Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sat, 31 Jan 2009 09:10:48 +0100 Subject: ixp: move serial to drivers/serial Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD diff --git a/cpu/ixp/Makefile b/cpu/ixp/Makefile index 6deecd4..7e98d87 100644 --- a/cpu/ixp/Makefile +++ b/cpu/ixp/Makefile @@ -28,7 +28,6 @@ LIB = $(obj)lib$(CPU).a START = start.o COBJS-y += cpu.o COBJS-y += interrupts.o -COBJS-y += serial.o ifndef CONFIG_USE_IRQ COBJS-y += timer.o endif diff --git a/cpu/ixp/serial.c b/cpu/ixp/serial.c deleted file mode 100644 index dd26af4..0000000 --- a/cpu/ixp/serial.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Alex Zuepke - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include -#include - -/* - * 14.7456 MHz - * Baud Rate = -------------- - * 16 x Divisor - */ -#define SERIAL_CLOCK 921600 - -DECLARE_GLOBAL_DATA_PTR; - -void serial_setbrg (void) -{ - unsigned int quot = 0; - int uart = CONFIG_SYS_IXP425_CONSOLE; - - if ((gd->baudrate <= SERIAL_CLOCK) && (SERIAL_CLOCK % gd->baudrate == 0)) - quot = SERIAL_CLOCK / gd->baudrate; - else - hang (); - - IER(uart) = 0; /* Disable for now */ - FCR(uart) = 0; /* No fifos enabled */ - - /* set baud rate */ - LCR(uart) = LCR_WLS0 | LCR_WLS1 | LCR_DLAB; - DLL(uart) = quot & 0xff; - DLH(uart) = quot >> 8; - LCR(uart) = LCR_WLS0 | LCR_WLS1; -#ifdef CONFIG_SERIAL_RTS_ACTIVE - MCR(uart) = MCR_RTS; /* set RTS active */ -#else - MCR(uart) = 0; /* set RTS inactive */ -#endif - IER(uart) = IER_UUE; -} - -/* - * Initialise the serial port with the given baudrate. The settings - * are always 8 data bits, no parity, 1 stop bit, no start bits. - * - */ -int serial_init (void) -{ - serial_setbrg (); - - return (0); -} - - -/* - * Output a single byte to the serial port. - */ -void serial_putc (const char c) -{ - /* wait for room in the tx FIFO on UART */ - while ((LSR(CONFIG_SYS_IXP425_CONSOLE) & LSR_TEMT) == 0); - - THR(CONFIG_SYS_IXP425_CONSOLE) = c; - - /* If \n, also do \r */ - if (c == '\n') - serial_putc ('\r'); -} - -/* - * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. When the function is succesfull, the character read is - * written into its argument c. - */ -int serial_tstc (void) -{ - return LSR(CONFIG_SYS_IXP425_CONSOLE) & LSR_DR; -} - -/* - * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. When the function is succesfull, the character read is - * written into its argument c. - */ -int serial_getc (void) -{ - while (!(LSR(CONFIG_SYS_IXP425_CONSOLE) & LSR_DR)); - - return (char) RBR(CONFIG_SYS_IXP425_CONSOLE) & 0xff; -} - -void -serial_puts (const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index c7a1882..b6fd0d7 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -32,6 +32,7 @@ COBJS-y += ns16550.o COBJS-$(CONFIG_DRIVER_S3C4510_UART) += s3c4510b_uart.o COBJS-$(CONFIG_S3C64XX) += s3c64xx.o COBJS-y += serial.o +COBJS-$(CONFIG_IXP_SERIAL) += serial_ixp.o COBJS-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o COBJS-$(CONFIG_PL010_SERIAL) += serial_pl01x.o COBJS-$(CONFIG_PL011_SERIAL) += serial_pl01x.o diff --git a/drivers/serial/serial_ixp.c b/drivers/serial/serial_ixp.c new file mode 100644 index 0000000..dd26af4 --- /dev/null +++ b/drivers/serial/serial_ixp.c @@ -0,0 +1,125 @@ +/* + * (C) Copyright 2002 + * Wolfgang Denk, DENX Software Engineering, + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Alex Zuepke + * + * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include + +/* + * 14.7456 MHz + * Baud Rate = -------------- + * 16 x Divisor + */ +#define SERIAL_CLOCK 921600 + +DECLARE_GLOBAL_DATA_PTR; + +void serial_setbrg (void) +{ + unsigned int quot = 0; + int uart = CONFIG_SYS_IXP425_CONSOLE; + + if ((gd->baudrate <= SERIAL_CLOCK) && (SERIAL_CLOCK % gd->baudrate == 0)) + quot = SERIAL_CLOCK / gd->baudrate; + else + hang (); + + IER(uart) = 0; /* Disable for now */ + FCR(uart) = 0; /* No fifos enabled */ + + /* set baud rate */ + LCR(uart) = LCR_WLS0 | LCR_WLS1 | LCR_DLAB; + DLL(uart) = quot & 0xff; + DLH(uart) = quot >> 8; + LCR(uart) = LCR_WLS0 | LCR_WLS1; +#ifdef CONFIG_SERIAL_RTS_ACTIVE + MCR(uart) = MCR_RTS; /* set RTS active */ +#else + MCR(uart) = 0; /* set RTS inactive */ +#endif + IER(uart) = IER_UUE; +} + +/* + * Initialise the serial port with the given baudrate. The settings + * are always 8 data bits, no parity, 1 stop bit, no start bits. + * + */ +int serial_init (void) +{ + serial_setbrg (); + + return (0); +} + + +/* + * Output a single byte to the serial port. + */ +void serial_putc (const char c) +{ + /* wait for room in the tx FIFO on UART */ + while ((LSR(CONFIG_SYS_IXP425_CONSOLE) & LSR_TEMT) == 0); + + THR(CONFIG_SYS_IXP425_CONSOLE) = c; + + /* If \n, also do \r */ + if (c == '\n') + serial_putc ('\r'); +} + +/* + * Read a single byte from the serial port. Returns 1 on success, 0 + * otherwise. When the function is succesfull, the character read is + * written into its argument c. + */ +int serial_tstc (void) +{ + return LSR(CONFIG_SYS_IXP425_CONSOLE) & LSR_DR; +} + +/* + * Read a single byte from the serial port. Returns 1 on success, 0 + * otherwise. When the function is succesfull, the character read is + * written into its argument c. + */ +int serial_getc (void) +{ + while (!(LSR(CONFIG_SYS_IXP425_CONSOLE) & LSR_DR)); + + return (char) RBR(CONFIG_SYS_IXP425_CONSOLE) & 0xff; +} + +void +serial_puts (const char *s) +{ + while (*s) { + serial_putc (*s++); + } +} diff --git a/include/configs/actux1.h b/include/configs/actux1.h index 58d56ee..adbc399 100644 --- a/include/configs/actux1.h +++ b/include/configs/actux1.h @@ -39,6 +39,7 @@ #define CONFIG_DISPLAY_CPUINFO 1 #define CONFIG_DISPLAY_BOARDINFO 1 +#define CONFIG_IXP_SERIAL #define CONFIG_SYS_IXP425_CONSOLE IXP425_UART2 #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/actux2.h b/include/configs/actux2.h index 6f59a51..4c579eb 100644 --- a/include/configs/actux2.h +++ b/include/configs/actux2.h @@ -32,6 +32,7 @@ #define CONFIG_DISPLAY_CPUINFO 1 #define CONFIG_DISPLAY_BOARDINFO 1 +#define CONFIG_IXP_SERIAL #define CONFIG_SYS_IXP425_CONSOLE IXP425_UART2 #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTDELAY 5 diff --git a/include/configs/actux3.h b/include/configs/actux3.h index a7bb38c..694f522 100644 --- a/include/configs/actux3.h +++ b/include/configs/actux3.h @@ -32,6 +32,7 @@ #define CONFIG_DISPLAY_CPUINFO 1 #define CONFIG_DISPLAY_BOARDINFO 1 +#define CONFIG_IXP_SERIAL #define CONFIG_SYS_IXP425_CONSOLE IXP425_UART2 #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/actux4.h b/include/configs/actux4.h index f2b701f..cdc9956 100644 --- a/include/configs/actux4.h +++ b/include/configs/actux4.h @@ -32,6 +32,7 @@ #define CONFIG_DISPLAY_CPUINFO 1 #define CONFIG_DISPLAY_BOARDINFO 1 +#define CONFIG_IXP_SERIAL #define CONFIG_SYS_IXP425_CONSOLE IXP425_UART1 #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h index edebb40..70f3987 100644 --- a/include/configs/ixdp425.h +++ b/include/configs/ixdp425.h @@ -135,6 +135,7 @@ /* * select serial console configuration */ +#define CONFIG_IXP_SERIAL #define CONFIG_SYS_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */ /* diff --git a/include/configs/ixdpg425.h b/include/configs/ixdpg425.h index 528bccd..193008e 100644 --- a/include/configs/ixdpg425.h +++ b/include/configs/ixdpg425.h @@ -72,6 +72,7 @@ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE +#define CONFIG_IXP_SERIAL #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */ diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h index f8aac1a..4da401f 100644 --- a/include/configs/pdnb3.h +++ b/include/configs/pdnb3.h @@ -68,6 +68,7 @@ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE +#define CONFIG_IXP_SERIAL #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */ -- cgit v0.10.2