From 6c016485a685b5cdac28edb25147311a3e88d51f Mon Sep 17 00:00:00 2001 From: Suriyan Ramasami Date: Mon, 17 Nov 2014 14:39:39 -0800 Subject: sandbox: script for testing sandbox/ext4/fat/fs commands Test size/read/write commands in a sandbox environment. Signed-off-by: Suriyan Ramasami Acked-by: Simon Glass diff --git a/test/fs/fs-test.sh b/test/fs/fs-test.sh new file mode 100755 index 0000000..a4fb055 --- /dev/null +++ b/test/fs/fs-test.sh @@ -0,0 +1,561 @@ +#!/bin/bash +# +# (C) Copyright 2014 Suriyan Ramasami +# +# SPDX-License-Identifier: GPL-2.0+ +# + +# Invoke this test script from U-Boot base directory as ./test/fs/fs-test.sh +# It currently tests the fs/sb and native commands for ext4 and fat partitions +# Expected results are as follows: +# EXT4 tests: +# fs-test.sb.ext4.out: Summary: PASS: 17 FAIL: 2 +# fs-test.ext4.out: Summary: PASS: 11 FAIL: 8 +# fs-test.fs.ext4.out: Summary: PASS: 11 FAIL: 8 +# FAT tests: +# fs-test.sb.fat.out: Summary: PASS: 17 FAIL: 2 +# fs-test.fat.out: Summary: PASS: 19 FAIL: 0 +# fs-test.fs.fat.out: Summary: PASS: 19 FAIL: 0 +# Total Summary: TOTAL PASS: 94 TOTAL FAIL: 20 + +# pre-requisite binaries list. +PREREQ_BINS="md5sum mkfs mount umount dd fallocate mkdir" + +# All generated output files from this test will be in $OUT_DIR +# Hence everything is sandboxed. +OUT_DIR="sandbox/test/fs" + +# Location of generated sandbox u-boot +UBOOT="./sandbox/u-boot" + +# Our mount directory will be in the sandbox +MOUNT_DIR="${OUT_DIR}/mnt" + +# The file system image we create will have the $IMG prefix. +IMG="${OUT_DIR}/3GB" + +# $SMALL_FILE is the name of the 1MB file in the file system image +SMALL_FILE="1MB.file" + +# $BIG_FILE is the name of the 2.5GB file in the file system image +BIG_FILE="2.5GB.file" + +# $MD5_FILE will have the expected md5s when we do the test +# They shall have a suffix which represents their file system (ext4/fat) +MD5_FILE="${OUT_DIR}/md5s.list" + +# $OUT shall be the prefix of the test output. Their suffix will be .out +OUT="${OUT_DIR}/fs-test" + +# Full Path of the 1 MB file that shall be created in the fs image. +MB1="${MOUNT_DIR}/${SMALL_FILE}" +GB2p5="${MOUNT_DIR}/${BIG_FILE}" + +# ************************ +# * Functions start here * +# ************************ + +# Check if the prereq binaries exist, or exit +function check_prereq() { + for prereq in $PREREQ_BINS; do + if [ ! -x `which $prereq` ]; then + echo "Missing $prereq binary. Exiting!" + exit + fi + done + + # We use /dev/urandom to create files. Check if it exists. + if [ ! -c /dev/urandom ]; then + echo "Missing character special /dev/urandom. Exiting!" + exit + fi +} + +# If 1st param is "clean", then clean out the generated files and exit +function check_clean() { + if [ "$1" = "clean" ]; then + rm -rf "$OUT_DIR" + echo "Cleaned up generated files. Exiting" + exit + fi +} + +# Generate sandbox U-Boot - gleaned from /test/dm/test-dm.sh +function compile_sandbox() { + unset CROSS_COMPILE + NUM_CPUS=$(cat /proc/cpuinfo |grep -c processor) + make O=sandbox sandbox_config + make O=sandbox -s -j${NUM_CPUS} + + # Check if U-Boot exists + if [ ! -x "$UBOOT" ]; then + echo "$UBOOT does not exist or is not executable" + echo "Build error?" + echo "Please run this script as ./test/fs/`basename $0`" + exit + fi +} + +# Clean out all generated files other than the file system images +# We save time by not deleting and recreating the file system images +function prepare_env() { + rm -f ${MD5_FILE}.* ${OUT}.* + mkdir ${OUT_DIR} +} + +# 1st parameter is the name of the image file to be created +# 2nd parameter is the filesystem - fat ext4 etc +# -F cant be used with fat as it means something else. +function create_image() { + # Create image if not already present - saves time, while debugging + if [ "$2" = "ext4" ]; then + MKFS_OPTION="-F" + else + MKFS_OPTION="" + fi + if [ ! -f "$1" ]; then + fallocate -l 3G "$1" &> /dev/null + mkfs -t "$2" $MKFS_OPTION "$1" &> /dev/null + if [ $? -ne 0 -a "$2" = "fat" ]; then + # If we fail and we did fat, try vfat. + mkfs -t vfat $MKFS_OPTION "$1" &> /dev/null + fi + fi +} + +# 1st parameter is the FS type: fat/ext4 +# 2nd parameter is the name of small file +# Returns filename which can be used for fat or ext4 for writing +function fname_for_write() { + case $1 in + ext4) + # ext4 needs absolute path name of file + echo /${2}.w + ;; + + *) + echo ${2}.w + ;; + esac +} + +# 1st parameter is image file +# 2nd parameter is file system type - fat/ext4 +# 3rd parameter is name of small file +# 4th parameter is name of big file +# 5th parameter is fs/nonfs/sb - to dictate generic fs commands or +# otherwise or sb hostfs +# 6th parameter is the directory path for the files. Its "" for generic +# fs and ext4/fat and full patch for sb hostfs +# UBOOT is set in env +function test_image() { + addr="0x01000008" + length="0x00100000" + + case "$2" in + fat) + PREFIX="fat" + WRITE="write" + ;; + + ext4) + PREFIX="ext4" + WRITE="write" + ;; + + *) + echo "Unhandled filesystem $2. Exiting!" + exit + ;; + esac + + case "$5" in + fs) + PREFIX="" + WRITE="save" + SUFFIX=" 0:0" + ;; + + nonfs) + SUFFIX=" 0:0" + ;; + + sb) + PREFIX="sb " + WRITE="save" + SUFFIX="fs -" + ;; + + *) + echo "Unhandled mode $5. Exiting!" + exit + ;; + + esac + + if [ -z "$6" ]; then + FILE_WRITE=`fname_for_write $2 $3` + FILE_SMALL=$3 + FILE_BIG=$4 + else + FILE_WRITE=$6/`fname_for_write $2 $3` + FILE_SMALL=$6/$3 + FILE_BIG=$6/$4 + fi + + # In u-boot commands, stands for host or hostfs + # hostfs maps to the host fs. + # host maps to the "sb bind" that we do + + $UBOOT << EOF +sb=$5 +setenv bind 'if test "\$sb" != sb; then sb bind 0 "$1"; fi' +run bind +# Test Case 1 - ls +${PREFIX}ls host${SUFFIX} $6 +# +# We want ${PREFIX}size host 0:0 $3 for host commands and +# sb size hostfs - $3 for hostfs commands. +# 1MB is 0x0010 0000 +# Test Case 2 - size of small file +${PREFIX}size host${SUFFIX} $FILE_SMALL +printenv filesize +setenv filesize + +# 2.5GB (1024*1024*2500) is 0x9C40 0000 +# Test Case 3 - size of big file +${PREFIX}size host${SUFFIX} $FILE_BIG +printenv filesize +setenv filesize + +# Notes about load operation +# If I use 0x01000000 I get DMA misaligned error message +# Last two parameters are size and offset. + +# Test Case 4a - Read full 1MB of small file +${PREFIX}load host${SUFFIX} $addr $FILE_SMALL +printenv filesize +# Test Case 4b - Read full 1MB of small file +md5sum $addr \$filesize +setenv filesize + +# Test Case 5a - First 1MB of big file +${PREFIX}load host${SUFFIX} $addr $FILE_BIG $length 0x0 +printenv filesize +# Test Case 5b - First 1MB of big file +md5sum $addr \$filesize +setenv filesize + +# fails for ext as no offset support +# Test Case 6a - Last 1MB of big file +${PREFIX}load host${SUFFIX} $addr $FILE_BIG $length 0x9C300000 +printenv filesize +# Test Case 6b - Last 1MB of big file +md5sum $addr \$filesize +setenv filesize + +# fails for ext as no offset support +# Test Case 7a - One from the last 1MB chunk of 2GB +${PREFIX}load host${SUFFIX} $addr $FILE_BIG $length 0x7FF00000 +printenv filesize +# Test Case 7b - One from the last 1MB chunk of 2GB +md5sum $addr \$filesize +setenv filesize + +# fails for ext as no offset support +# Test Case 8a - One from the start 1MB chunk from 2GB +${PREFIX}load host${SUFFIX} $addr $FILE_BIG $length 0x80000000 +printenv filesize +# Test Case 8b - One from the start 1MB chunk from 2GB +md5sum $addr \$filesize +setenv filesize + +# fails for ext as no offset support +# Test Case 9a - One 1MB chunk crossing the 2GB boundary +${PREFIX}load host${SUFFIX} $addr $FILE_BIG $length 0x7FF80000 +printenv filesize +# Test Case 9b - One 1MB chunk crossing the 2GB boundary +md5sum $addr \$filesize +setenv filesize + +# Generic failure case +# Test Case 10 - 2MB chunk from the last 1MB of big file +${PREFIX}load host${SUFFIX} $addr $FILE_BIG 0x00200000 0x9C300000 +printenv filesize +# + +# Read 1MB from small file +${PREFIX}load host${SUFFIX} $addr $FILE_SMALL +# Write it back to test the writes +# Test Case 11a - Check that the write succeeded +${PREFIX}${WRITE} host${SUFFIX} $addr $FILE_WRITE \$filesize +mw.b $addr 00 100 +${PREFIX}load host${SUFFIX} $addr $FILE_WRITE +# Test Case 11b - Check md5 of written to is same as the one read from +md5sum $addr \$filesize +setenv filesize +# +reset + +EOF +} + +# 1st argument is the name of the image file. +# 2nd argument is the file where we generate the md5s of the files +# generated with the appropriate start and length that we use to test. +# It creates the necessary files in the image to test. +# $GB2p5 is the path of the big file (2.5 GB) +# $MB1 is the path of the small file (1 MB) +# $MOUNT_DIR is the path we can use to mount the image file. +function create_files() { + # Mount the image so we can populate it. + mkdir -p "$MOUNT_DIR" + sudo mount -o loop,rw "$1" "$MOUNT_DIR" + + # Create big file in this image. + # Note that we work only on the start 1MB, couple MBs in the 2GB range + # and the last 1 MB of the huge 2.5GB file. + # So, just put random values only in those areas. + if [ ! -f "${GB2p5}" ]; then + sudo dd if=/dev/urandom of="${GB2p5}" bs=1M count=1 \ + &> /dev/null + sudo dd if=/dev/urandom of="${GB2p5}" bs=1M count=2 seek=2047 \ + &> /dev/null + sudo dd if=/dev/urandom of="${GB2p5}" bs=1M count=1 seek=2499 \ + &> /dev/null + fi + + # Create a small file in this image. + if [ ! -f "${MB1}" ]; then + sudo dd if=/dev/urandom of="${MB1}" bs=1M count=1 \ + &> /dev/null + fi + + # Delete the small file which possibly is written as part of a + # previous test. + sudo rm -f "${MB1}.w" + + # Generate the md5sums of reads that we will test against small file + dd if="${MB1}" bs=1M skip=0 count=1 2> /dev/null | md5sum > "$2" + + # Generate the md5sums of reads that we will test against big file + # One from beginning of file. + dd if="${GB2p5}" bs=1M skip=0 count=1 \ + 2> /dev/null | md5sum >> "$2" + + # One from end of file. + dd if="${GB2p5}" bs=1M skip=2499 count=1 \ + 2> /dev/null | md5sum >> "$2" + + # One from the last 1MB chunk of 2GB + dd if="${GB2p5}" bs=1M skip=2047 count=1 \ + 2> /dev/null | md5sum >> "$2" + + # One from the start 1MB chunk from 2GB + dd if="${GB2p5}" bs=1M skip=2048 count=1 \ + 2> /dev/null | md5sum >> "$2" + + # One 1MB chunk crossing the 2GB boundary + dd if="${GB2p5}" bs=512K skip=4095 count=2 \ + 2> /dev/null | md5sum >> "$2" + + sync + sudo umount "$MOUNT_DIR" + rmdir "$MOUNT_DIR" +} + +# 1st parameter is the text to print +# if $? is 0 its a pass, else a fail +# As a side effect it shall update env variable PASS and FAIL +function pass_fail() { + if [ $? -eq 0 ]; then + echo pass - "$1" + PASS=$((PASS + 1)) + else + echo FAIL - "$1" + FAIL=$((FAIL + 1)) + fi +} + +# 1st parameter is the string which leads to an md5 generation +# 2nd parameter is the file we grep, for that string +# 3rd parameter is the name of the file which has md5s in it +# 4th parameter is the line # in the md5 file that we match it against +# This function checks if the md5 of the file in the sandbox matches +# that calculated while generating the file +# 5th parameter is the string to print with the result +check_md5() { + # md5sum in u-boot has output of form: + # md5 for 01000008 ... 01100007 ==> + # the 7th field is the actual md5 + md5_src=`grep -A3 "$1" "$2" | grep "md5 for"` + md5_src=($md5_src) + md5_src=${md5_src[6]} + + # The md5 list, each line is of the form: + # - + # the 2nd field is the actual md5 + md5_dst=`sed -n $4p $3` + md5_dst=($md5_dst) + md5_dst=${md5_dst[0]} + + # For a pass they should match. + [ "$md5_src" = "$md5_dst" ] + pass_fail "$5" +} + +# 1st parameter is the name of the output file to check +# 2nd parameter is the name of the file containing the md5 expected +# 3rd parameter is the name of the small file +# 4th parameter is the name of the big file +# 5th paramter is the name of the written file +# This function checks the output file for correct results. +function check_results() { + echo "** Start $1" + + PASS=0 + FAIL=0 + + # Check if the ls is showing correct results for 2.5 gb file + grep -A6 "Test Case 1 " "$1" | egrep -iq "2621440000 *$4" + pass_fail "TC1: ls of $4" + + # Check if the ls is showing correct results for 1 mb file + grep -A6 "Test Case 1 " "$1" | egrep -iq "1048576 *$3" + pass_fail "TC1: ls of $3" + + # Check size command on 1MB.file + egrep -A3 "Test Case 2 " "$1" | grep -q "filesize=100000" + pass_fail "TC2: size of $3" + + # Check size command on 2.5GB.file + egrep -A3 "Test Case 3 " "$1" | grep -q "filesize=9c400000" + pass_fail "TC3: size of $4" + + # Check read full mb of 1MB.file + grep -A6 "Test Case 4a " "$1" | grep -q "filesize=100000" + pass_fail "TC4: load of $3 size" + check_md5 "Test Case 4b " "$1" "$2" 1 "TC4: load from $3" + + # Check first mb of 2.5GB.file + grep -A6 "Test Case 5a " "$1" | grep -q "filesize=100000" + pass_fail "TC5: load of 1st MB from $4 size" + check_md5 "Test Case 5b " "$1" "$2" 2 "TC5: load of 1st MB from $4" + + # Check last mb of 2.5GB.file + grep -A6 "Test Case 6a " "$1" | grep -q "filesize=100000" + pass_fail "TC6: load of last MB from $4 size" + check_md5 "Test Case 6b " "$1" "$2" 3 "TC6: load of last MB from $4" + + # Check last 1mb chunk of 2gb from 2.5GB file + grep -A6 "Test Case 7a " "$1" | grep -q "filesize=100000" + pass_fail "TC7: load of last 1mb chunk of 2GB from $4 size" + check_md5 "Test Case 7b " "$1" "$2" 4 \ + "TC7: load of last 1mb chunk of 2GB from $4" + + # Check first 1mb chunk after 2gb from 2.5GB file + grep -A6 "Test Case 8a " "$1" | grep -q "filesize=100000" + pass_fail "TC8: load 1st MB chunk after 2GB from $4 size" + check_md5 "Test Case 8b " "$1" "$2" 5 \ + "TC8: load 1st MB chunk after 2GB from $4" + + # Check 1mb chunk crossing the 2gb boundary from 2.5GB file + grep -A6 "Test Case 9a " "$1" | grep -q "filesize=100000" + pass_fail "TC9: load 1MB chunk crossing 2GB boundary from $4 size" + check_md5 "Test Case 9b " "$1" "$2" 6 \ + "TC9: load 1MB chunk crossing 2GB boundary from $4" + + # Check 2mb chunk from the last 1MB of 2.5GB file - generic failure case + grep -A6 "Test Case 10 " "$1" | grep -q 'Error: "filesize" not defined' + pass_fail "TC10: load 2MB from the last 1MB of $4 - generic fail case" + + # Check 1mb chunk write + grep -A3 "Test Case 11a " "$1" | \ + egrep -q '1048576 bytes written|update journal' + pass_fail "TC11: 1MB write to $5 - write succeeded" + check_md5 "Test Case 11b " "$1" "$2" 1 \ + "TC11: 1MB write to $5 - content verified" + echo "** End $1" +} + +# Takes in one parameter which is "fs" or "nonfs", which then dictates +# if a fs test (size/load/save) or a nonfs test (fatread/extread) needs to +# be performed. +function test_fs_nonfs() { + echo "Creating files in $fs image if not already present." + create_files $IMAGE $MD5_FILE_FS + + OUT_FILE="${OUT}.fs.${fs}.out" + test_image $IMAGE $fs $SMALL_FILE $BIG_FILE $1 "" \ + > ${OUT_FILE} + check_results $OUT_FILE $MD5_FILE_FS $SMALL_FILE $BIG_FILE \ + $WRITE_FILE + TOTAL_FAIL=$((TOTAL_FAIL + FAIL)) + TOTAL_PASS=$((TOTAL_PASS + PASS)) + echo "Summary: PASS: $PASS FAIL: $FAIL" + echo "--------------------------------------------" +} + +# ******************** +# * End of functions * +# ******************** + +check_clean "$1" +check_prereq +compile_sandbox +prepare_env + +# Track TOTAL_FAIL and TOTAL_PASS +TOTAL_FAIL=0 +TOTAL_PASS=0 + +# In each loop, for a given file system image, we test both the +# fs command, like load/size/write, the file system specific command +# like: ext4load/ext4size/ext4write and the sb load/ls/save commands. +for fs in ext4 fat; do + + echo "Creating $fs image if not already present." + IMAGE=${IMG}.${fs}.img + MD5_FILE_FS="${MD5_FILE}.${fs}" + create_image $IMAGE $fs + + # sb commands test + echo "Creating files in $fs image if not already present." + create_files $IMAGE $MD5_FILE_FS + + # Lets mount the image and test sb hostfs commands + mkdir -p "$MOUNT_DIR" + if [ "$fs" = "fat" ]; then + uid="uid=`id -u`" + else + uid="" + fi + sudo mount -o loop,rw,$uid "$IMAGE" "$MOUNT_DIR" + sudo chmod 777 "$MOUNT_DIR" + + OUT_FILE="${OUT}.sb.${fs}.out" + test_image $IMAGE $fs $SMALL_FILE $BIG_FILE sb `pwd`/$MOUNT_DIR \ + > ${OUT_FILE} + sudo umount "$MOUNT_DIR" + rmdir "$MOUNT_DIR" + + check_results $OUT_FILE $MD5_FILE_FS $SMALL_FILE $BIG_FILE \ + $WRITE_FILE + TOTAL_FAIL=$((TOTAL_FAIL + FAIL)) + TOTAL_PASS=$((TOTAL_PASS + PASS)) + echo "Summary: PASS: $PASS FAIL: $FAIL" + echo "--------------------------------------------" + + test_fs_nonfs nonfs + test_fs_nonfs fs +done + +echo "Total Summary: TOTAL PASS: $TOTAL_PASS TOTAL FAIL: $TOTAL_FAIL" +echo "--------------------------------------------" +if [ $TOTAL_FAIL -eq 0 ]; then + echo "PASSED" + exit 0 +else + echo "FAILED" + exit 1 +fi -- cgit v0.10.2