From deb94d6192e7507d743aefa69a86954c0c26be82 Mon Sep 17 00:00:00 2001
From: Nikita Kiryanov <nikita@compulab.co.il>
Date: Wed, 14 Jan 2015 10:42:46 +0200
Subject: arm: mx6: cm-fx6: add hdmi console support

Add support for hdmi console.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>

diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c
index eb18dfc..b31e1f5 100644
--- a/board/compulab/cm_fx6/cm_fx6.c
+++ b/board/compulab/cm_fx6/cm_fx6.c
@@ -18,8 +18,10 @@
 #include <asm/arch/crm_regs.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/iomux.h>
+#include <asm/arch/mxc_hdmi.h>
 #include <asm/imx-common/mxc_i2c.h>
 #include <asm/imx-common/sata.h>
+#include <asm/imx-common/video.h>
 #include <asm/io.h>
 #include <asm/gpio.h>
 #include <dm/platform_data/serial_mxc.h>
@@ -28,6 +30,53 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifdef CONFIG_IMX_HDMI
+static void cm_fx6_enable_hdmi(struct display_info_t const *dev)
+{
+	imx_enable_hdmi_phy();
+}
+
+struct display_info_t const displays[] = {
+	{
+		.bus	= -1,
+		.addr	= 0,
+		.pixfmt	= IPU_PIX_FMT_RGB24,
+		.detect	= detect_hdmi,
+		.enable	= cm_fx6_enable_hdmi,
+		.mode	= {
+			.name           = "HDMI",
+			.refresh        = 60,
+			.xres           = 1024,
+			.yres           = 768,
+			.pixclock       = 40385,
+			.left_margin    = 220,
+			.right_margin   = 40,
+			.upper_margin   = 21,
+			.lower_margin   = 7,
+			.hsync_len      = 60,
+			.vsync_len      = 10,
+			.sync           = FB_SYNC_EXT,
+			.vmode          = FB_VMODE_NONINTERLACED,
+		}
+	},
+};
+size_t display_count = ARRAY_SIZE(displays);
+
+static void cm_fx6_setup_display(void)
+{
+	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+	int reg;
+
+	enable_ipu_clock();
+	imx_setup_hdmi();
+	reg = __raw_readl(&mxc_ccm->CCGR3);
+	reg |= MXC_CCM_CCGR3_IPU1_IPU_DI0_MASK;
+	writel(reg, &mxc_ccm->CCGR3);
+}
+#else
+static inline void cm_fx6_setup_display(void) {}
+#endif /* CONFIG_VIDEO_IPUV3 */
+
 #ifdef CONFIG_DWC_AHSATA
 static int cm_fx6_issd_gpios[] = {
 	/* The order of the GPIOs in the array is important! */
@@ -516,6 +565,8 @@ int board_init(void)
 	if (ret)
 		printf("Warning: I2C setup failed: %d\n", ret);
 
+	cm_fx6_setup_display();
+
 	return 0;
 }
 
diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index a2e42c4..a9f33a9 100644
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -103,6 +103,9 @@
 #define CONFIG_ENV_OFFSET		(768 * 1024)
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
+	"stdout=serial,vga\0" \
+	"stderr=serial,vga\0" \
+	"panel=HDMI\0" \
 	"autoload=no\0" \
 	"kernel=uImage-cm-fx6\0" \
 	"script=boot.scr\0" \
@@ -291,4 +294,16 @@
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
 #define CONFIG_SPL_SPI_LOAD
 
+/* Display */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_IPUV3_CLK          260000000
+#define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_VIDEO_SW_CURSOR
+
 #endif	/* __CONFIG_CM_FX6_H */
-- 
cgit v0.10.2