/* * Copyright (C) 2017 Álvaro Fernández Rojas * * SPDX-License-Identifier: GPL-2.0+ */ #include #include #include #include "skeleton.dtsi" / { compatible = "brcm,bcm3380"; cpus { reg = <0x14e00000 0x4>; #address-cells = <1>; #size-cells = <0>; u-boot,dm-pre-reloc; cpu@0 { compatible = "brcm,bcm3380-cpu", "mips,mips4Kc"; device_type = "cpu"; reg = <0>; u-boot,dm-pre-reloc; }; cpu@1 { compatible = "brcm,bcm3380-cpu", "mips,mips4Kc"; device_type = "cpu"; reg = <1>; u-boot,dm-pre-reloc; }; }; clocks { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; u-boot,dm-pre-reloc; periph_osc: periph-osc { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; u-boot,dm-pre-reloc; }; periph_clk0: periph-clk@14e00004 { compatible = "brcm,bcm6345-clk"; reg = <0x14e00004 0x4>; #clock-cells = <1>; }; periph_clk1: periph-clk@14e00008 { compatible = "brcm,bcm6345-clk"; reg = <0x14e00008 0x4>; #clock-cells = <1>; }; }; ubus { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; u-boot,dm-pre-reloc; memory-controller@12000000 { compatible = "brcm,bcm6328-mc"; reg = <0x12000000 0x1000>; u-boot,dm-pre-reloc; }; periph_rst0: reset-controller@14e0008c { compatible = "brcm,bcm6345-reset"; reg = <0x14e0008c 0x4>; #reset-cells = <1>; }; periph_rst1: reset-controller@14e00090 { compatible = "brcm,bcm6345-reset"; reg = <0x14e00090 0x4>; #reset-cells = <1>; }; pll_cntl: syscon@14e00094 { compatible = "syscon"; reg = <0x14e00094 0x4>; }; syscon-reboot { compatible = "syscon-reboot"; regmap = <&pll_cntl>; offset = <0x0>; mask = <0x1>; }; wdt: watchdog@14e000dc { compatible = "brcm,bcm6345-wdt"; reg = <0x14e000dc 0xc>; clocks = <&periph_osc>; }; wdt-reboot { compatible = "wdt-reboot"; wdt = <&wdt>; }; gpio0: gpio-controller@14e00100 { compatible = "brcm,bcm6345-gpio"; reg = <0x14e00100 0x4>, <0x14e00108 0x4>; gpio-controller; #gpio-cells = <2>; status = "disabled"; }; gpio1: gpio-controller@14e00104 { compatible = "brcm,bcm6345-gpio"; reg = <0x14e00104 0x4>, <0x14e0010c 0x4>; gpio-controller; #gpio-cells = <2>; ngpios = <3>; status = "disabled"; }; uart0: serial@14e00200 { compatible = "brcm,bcm6345-uart"; reg = <0x14e00200 0x18>; clocks = <&periph_osc>; status = "disabled"; }; uart1: serial@14e00220 { compatible = "brcm,bcm6345-uart"; reg = <0x14e00220 0x18>; clocks = <&periph_osc>; status = "disabled"; }; leds: led-controller@14e00f00 { compatible = "brcm,bcm6328-leds"; reg = <0x14e00f00 0x1c>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; }; };