rockchip: Add basic support for phyCORE-RK3288 SoM based carrier board

The phyCORE-RK3288 is a SoM (System on Module) containing a RK3288 SoC.
The module can be connected to different carrier boards.
It can be also equipped with different RAM, SPI flash and eMMC variants.
The Rapid Development Kit option is using the following setup:

  - 1 GB DDR3 RAM (2 Banks)
  - 1x 4 KB EEPROM
  - DP83867 Gigabit Ethernet PHY
  - 16 MB SPI Flash
  - 4 GB eMMC Flash

Add basic support for the PCM-947 carrier board, a RK3288 based development
board made by PHYTEC. This board works in a combination with
the phyCORE-RK3288 System on Module.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

2 files changed, 50 insertions, 0 deletions

diff --git a/arch/arm/mach-rockchip/rk3288-board-spl.c b/arch/arm/mach-rockchip/rk3288-board-spl.c
index 8ca6b1e..5668fd2 100644
--- a/arch/arm/mach-rockchip/rk3288-board-spl.c
+++ b/arch/arm/mach-rockchip/rk3288-board-spl.c
@@ -8,6 +8,7 @@
 #include <debug_uart.h>
 #include <dm.h>
 #include <fdtdec.h>
+#include <i2c.h>
 #include <led.h>
 #include <malloc.h>
 #include <ram.h>
@@ -25,6 +26,7 @@
 #include <dm/test.h>
 #include <dm/util.h>
 #include <power/regulator.h>
+#include <power/rk8xx_pmic.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -157,6 +159,32 @@ static int configure_emmc(struct udevice *pinctrl)
 }
 #endif
 
+#if !defined(CONFIG_SPL_OF_PLATDATA)
+static int phycore_init(void)
+{
+	struct udevice *pmic;
+	int ret;
+
+	ret = uclass_first_device_err(UCLASS_PMIC, &pmic);
+	if (ret)
+		return ret;
+
+#if defined(CONFIG_SPL_POWER_SUPPORT)
+	/* Increase USB input current to 2A */
+	ret = rk818_spl_configure_usb_input_current(pmic, 2000);
+	if (ret)
+		return ret;
+
+	/* Close charger when USB lower then 3.26V */
+	ret = rk818_spl_configure_usb_chrg_shutdown(pmic, 3260000);
+	if (ret)
+		return ret;
+#endif
+
+	return 0;
+}
+#endif
+
 void board_init_f(ulong dummy)
 {
 	struct udevice *pinctrl;
@@ -203,6 +231,18 @@ void board_init_f(ulong dummy)
 		debug("Pinctrl init failed: %d\n", ret);
 		return;
 	}
+
+#if !defined(CONFIG_SPL_OF_PLATDATA)
+	if (of_machine_is_compatible("phytec,rk3288-phycore-som")) {
+		ret = phycore_init();
+		if (ret) {
+			debug("Failed to set up phycore power settings: %d\n",
+			      ret);
+			return;
+		}
+	}
+#endif
+
 	debug("\nspl:init dram\n");
 	ret = uclass_get_device(UCLASS_RAM, 0, &dev);
 	if (ret) {
diff --git a/arch/arm/mach-rockchip/rk3288/Kconfig b/arch/arm/mach-rockchip/rk3288/Kconfig
index 8e7355e..53cc9a0 100644
--- a/arch/arm/mach-rockchip/rk3288/Kconfig
+++ b/arch/arm/mach-rockchip/rk3288/Kconfig
@@ -66,6 +66,14 @@ config TARGET_MIQI_RK3288
 	  has 1 or 2 GiB SDRAM. Expansion connectors provide access to
 	  I2C, SPI, UART, GPIOs and fan control.
 
+config TARGET_PHYCORE_RK3288
+	bool "phyCORE-RK3288"
+        select BOARD_LATE_INIT
+	help
+	  Add basic support for the PCM-947 carrier board, a RK3288 based
+	  development board made by PHYTEC. This board works in a combination
+	  with the phyCORE-RK3288 System on Module.
+
 config TARGET_POPMETAL_RK3288
 	bool "PopMetal-RK3288"
 	select BOARD_LATE_INIT
@@ -129,6 +137,8 @@ source "board/google/veyron/Kconfig"
 
 source "board/mqmaker/miqi_rk3288/Kconfig"
 
+source "board/phytec/phycore_rk3288/Kconfig"
+
 source "board/radxa/rock2/Kconfig"
 
 source "board/rockchip/evb_rk3288/Kconfig"