diff options
Diffstat (limited to 'arch/powerpc/cpu/mpc8xx/serial.c')
| -rw-r--r-- | arch/powerpc/cpu/mpc8xx/serial.c | 182 |
1 files changed, 83 insertions, 99 deletions
diff --git a/arch/powerpc/cpu/mpc8xx/serial.c b/arch/powerpc/cpu/mpc8xx/serial.c index d4f1a41..598ca2a 100644 --- a/arch/powerpc/cpu/mpc8xx/serial.c +++ b/arch/powerpc/cpu/mpc8xx/serial.c @@ -20,11 +20,13 @@ DECLARE_GLOBAL_DATA_PTR; #define SMC_INDEX 0 #define PROFF_SMC PROFF_SMC1 #define CPM_CR_CH_SMC CPM_CR_CH_SMC1 +#define IOPINS 0xc0 #elif defined(CONFIG_8xx_CONS_SMC2) /* Console on SMC2 */ #define SMC_INDEX 1 #define PROFF_SMC PROFF_SMC2 #define CPM_CR_CH_SMC CPM_CR_CH_SMC2 +#define IOPINS 0xc00 #endif /* CONFIG_8xx_CONS_SMCx */ @@ -37,15 +39,15 @@ DECLARE_GLOBAL_DATA_PTR; #endif #endif -typedef volatile struct serialbuffer { +struct serialbuffer { cbd_t rxbd; /* Rx BD */ cbd_t txbd; /* Tx BD */ uint rxindex; /* index for next character to read */ - volatile uchar rxbuf[CONFIG_SYS_SMC_RXBUFLEN];/* rx buffers */ - volatile uchar txbuf; /* tx buffers */ -} serialbuffer_t; + uchar rxbuf[CONFIG_SYS_SMC_RXBUFLEN];/* rx buffers */ + uchar txbuf; /* tx buffers */ +}; -static void serial_setdivisor(volatile cpm8xx_t *cp) +static void serial_setdivisor(cpm8xx_t __iomem *cp) { int divisor=(gd->cpu_clk + 8*gd->baudrate)/16/gd->baudrate; @@ -58,11 +60,11 @@ static void serial_setdivisor(volatile cpm8xx_t *cp) divisor /= CONFIG_SYS_BRGCLK_PRESCALE; #endif - if(divisor<=0x1000) { - cp->cp_brgc1=((divisor-1)<<1) | CPM_BRG_EN; - } else { - cp->cp_brgc1=((divisor/16-1)<<1) | CPM_BRG_EN | CPM_BRG_DIV16; - } + if (divisor <= 0x1000) + out_be32(&cp->cp_brgc1, ((divisor - 1) << 1) | CPM_BRG_EN); + else + out_be32(&cp->cp_brgc1, ((divisor / 16 - 1) << 1) | CPM_BRG_EN | + CPM_BRG_DIV16); } /* @@ -72,8 +74,8 @@ static void serial_setdivisor(volatile cpm8xx_t *cp) static void smc_setbrg (void) { - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - volatile cpm8xx_t *cp = &(im->im_cpm); + immap_t __iomem *im = (immap_t __iomem *)CONFIG_SYS_IMMR; + cpm8xx_t __iomem *cp = &(im->im_cpm); /* Set up the baud rate generator. * See 8xx_io/commproc.c for details. @@ -81,117 +83,107 @@ static void smc_setbrg (void) * Wire BRG1 to SMCx */ - cp->cp_simode = 0x00000000; + out_be32(&cp->cp_simode, 0); serial_setdivisor(cp); } static int smc_init (void) { - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - volatile smc_t *sp; - volatile smc_uart_t *up; - volatile cpm8xx_t *cp = &(im->im_cpm); - uint dpaddr; - volatile serialbuffer_t *rtx; + immap_t __iomem *im = (immap_t __iomem *)CONFIG_SYS_IMMR; + smc_t __iomem *sp; + smc_uart_t __iomem *up; + cpm8xx_t __iomem *cp = &(im->im_cpm); + struct serialbuffer __iomem *rtx; /* initialize pointers to SMC */ - sp = (smc_t *) &(cp->cp_smc[SMC_INDEX]); - up = (smc_uart_t *) &cp->cp_dparam[PROFF_SMC]; + sp = cp->cp_smc + SMC_INDEX; + up = (smc_uart_t __iomem *)&cp->cp_dparam[PROFF_SMC]; /* Disable relocation */ - up->smc_rpbase = 0; + out_be16(&up->smc_rpbase, 0); /* Disable transmitter/receiver. */ - sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); + clrbits_be16(&sp->smc_smcmr, SMCMR_REN | SMCMR_TEN); /* Enable SDMA. */ - im->im_siu_conf.sc_sdcr = 1; + out_be32(&im->im_siu_conf.sc_sdcr, 1); /* clear error conditions */ #ifdef CONFIG_SYS_SDSR - im->im_sdma.sdma_sdsr = CONFIG_SYS_SDSR; + out_8(&im->im_sdma.sdma_sdsr, CONFIG_SYS_SDSR); #else - im->im_sdma.sdma_sdsr = 0x83; + out_8(&im->im_sdma.sdma_sdsr, 0x83); #endif /* clear SDMA interrupt mask */ #ifdef CONFIG_SYS_SDMR - im->im_sdma.sdma_sdmr = CONFIG_SYS_SDMR; + out_8(&im->im_sdma.sdma_sdmr, CONFIG_SYS_SDMR); #else - im->im_sdma.sdma_sdmr = 0x00; + out_8(&im->im_sdma.sdma_sdmr, 0x00); #endif -#if defined(CONFIG_8xx_CONS_SMC1) - /* Use Port B for SMC1 instead of other functions. */ - cp->cp_pbpar |= 0x000000c0; - cp->cp_pbdir &= ~0x000000c0; - cp->cp_pbodr &= ~0x000000c0; -#else /* CONFIG_8xx_CONS_SMC2 */ - /* Use Port B for SMC2 instead of other functions. - */ - cp->cp_pbpar |= 0x00000c00; - cp->cp_pbdir &= ~0x00000c00; - cp->cp_pbodr &= ~0x00000c00; -#endif + /* Use Port B for SMCx instead of other functions. */ + setbits_be32(&cp->cp_pbpar, IOPINS); + clrbits_be32(&cp->cp_pbdir, IOPINS); + clrbits_be16(&cp->cp_pbodr, IOPINS); /* Set the physical address of the host memory buffers in * the buffer descriptors. */ - dpaddr = CPM_SERIAL_BASE; - - rtx = (serialbuffer_t *)&cp->cp_dpmem[dpaddr]; + rtx = (struct serialbuffer __iomem *)&cp->cp_dpmem[CPM_SERIAL_BASE]; /* Allocate space for two buffer descriptors in the DP ram. * For now, this address seems OK, but it may have to * change with newer versions of the firmware. * damm: allocating space after the two buffers for rx/tx data */ - rtx->rxbd.cbd_bufaddr = (uint) &rtx->rxbuf; - rtx->rxbd.cbd_sc = 0; + out_be32(&rtx->rxbd.cbd_bufaddr, (__force uint)&rtx->rxbuf); + out_be16(&rtx->rxbd.cbd_sc, 0); - rtx->txbd.cbd_bufaddr = (uint) &rtx->txbuf; - rtx->txbd.cbd_sc = 0; + out_be32(&rtx->txbd.cbd_bufaddr, (__force uint)&rtx->txbuf); + out_be16(&rtx->txbd.cbd_sc, 0); /* Set up the uart parameters in the parameter ram. */ - up->smc_rbase = dpaddr; - up->smc_tbase = dpaddr+sizeof(cbd_t); - up->smc_rfcr = SMC_EB; - up->smc_tfcr = SMC_EB; + out_be16(&up->smc_rbase, CPM_SERIAL_BASE); + out_be16(&up->smc_tbase, CPM_SERIAL_BASE + sizeof(cbd_t)); + out_8(&up->smc_rfcr, SMC_EB); + out_8(&up->smc_tfcr, SMC_EB); /* Set UART mode, 8 bit, no parity, one stop. * Enable receive and transmit. */ - sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; + out_be16(&sp->smc_smcmr, smcr_mk_clen(9) | SMCMR_SM_UART); /* Mask all interrupts and remove anything pending. */ - sp->smc_smcm = 0; - sp->smc_smce = 0xff; + out_8(&sp->smc_smcm, 0); + out_8(&sp->smc_smce, 0xff); /* Set up the baud rate generator */ smc_setbrg (); /* Make the first buffer the only buffer. */ - rtx->txbd.cbd_sc |= BD_SC_WRAP; - rtx->rxbd.cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP; + setbits_be16(&rtx->txbd.cbd_sc, BD_SC_WRAP); + setbits_be16(&rtx->rxbd.cbd_sc, BD_SC_EMPTY | BD_SC_WRAP); /* single/multi character receive. */ - up->smc_mrblr = CONFIG_SYS_SMC_RXBUFLEN; - up->smc_maxidl = CONFIG_SYS_MAXIDLE; - rtx->rxindex = 0; + out_be16(&up->smc_mrblr, CONFIG_SYS_SMC_RXBUFLEN); + out_be16(&up->smc_maxidl, CONFIG_SYS_MAXIDLE); + out_be32(&rtx->rxindex, 0); /* Initialize Tx/Rx parameters. */ - while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */ - ; + while (in_be16(&cp->cp_cpcr) & CPM_CR_FLG) /* wait if cp is busy */ + ; - cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC, CPM_CR_INIT_TRX) | CPM_CR_FLG; + out_be16(&cp->cp_cpcr, + mk_cr_cmd(CPM_CR_CH_SMC, CPM_CR_INIT_TRX) | CPM_CR_FLG); - while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */ - ; + while (in_be16(&cp->cp_cpcr) & CPM_CR_FLG) /* wait if cp is busy */ + ; /* Enable transmitter/receiver. */ - sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN; + setbits_be16(&sp->smc_smcmr, SMCMR_REN | SMCMR_TEN); return (0); } @@ -199,28 +191,22 @@ static int smc_init (void) static void smc_putc(const char c) { - volatile smc_uart_t *up; - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - volatile cpm8xx_t *cpmp = &(im->im_cpm); - volatile serialbuffer_t *rtx; + immap_t __iomem *im = (immap_t __iomem *)CONFIG_SYS_IMMR; + cpm8xx_t __iomem *cpmp = &(im->im_cpm); + struct serialbuffer __iomem *rtx; if (c == '\n') smc_putc ('\r'); - up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC]; - - rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase]; + rtx = (struct serialbuffer __iomem *)&cpmp->cp_dpmem[CPM_SERIAL_BASE]; /* Wait for last character to go. */ - rtx->txbuf = c; - rtx->txbd.cbd_datlen = 1; - rtx->txbd.cbd_sc |= BD_SC_READY; - __asm__("eieio"); + out_8(&rtx->txbuf, c); + out_be16(&rtx->txbd.cbd_datlen, 1); + setbits_be16(&rtx->txbd.cbd_sc, BD_SC_READY); - while (rtx->txbd.cbd_sc & BD_SC_READY) { + while (in_be16(&rtx->txbd.cbd_sc) & BD_SC_READY) WATCHDOG_RESET (); - __asm__("eieio"); - } } static void @@ -234,46 +220,44 @@ smc_puts (const char *s) static int smc_getc(void) { - volatile smc_uart_t *up; - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - volatile cpm8xx_t *cpmp = &(im->im_cpm); - volatile serialbuffer_t *rtx; + immap_t __iomem *im = (immap_t __iomem *)CONFIG_SYS_IMMR; + cpm8xx_t __iomem *cpmp = &(im->im_cpm); + struct serialbuffer __iomem *rtx; unsigned char c; + uint rxindex; - up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC]; - rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase]; + rtx = (struct serialbuffer __iomem *)&cpmp->cp_dpmem[CPM_SERIAL_BASE]; /* Wait for character to show up. */ - while (rtx->rxbd.cbd_sc & BD_SC_EMPTY) + while (in_be16(&rtx->rxbd.cbd_sc) & BD_SC_EMPTY) WATCHDOG_RESET (); /* the characters are read one by one, * use the rxindex to know the next char to deliver */ - c = *(unsigned char *) (rtx->rxbd.cbd_bufaddr+rtx->rxindex); - rtx->rxindex++; + rxindex = in_be32(&rtx->rxindex); + c = in_8(rtx->rxbuf + rxindex); + rxindex++; /* check if all char are readout, then make prepare for next receive */ - if (rtx->rxindex >= rtx->rxbd.cbd_datlen) { - rtx->rxindex = 0; - rtx->rxbd.cbd_sc |= BD_SC_EMPTY; + if (rxindex >= in_be16(&rtx->rxbd.cbd_datlen)) { + rxindex = 0; + setbits_be16(&rtx->rxbd.cbd_sc, BD_SC_EMPTY); } + out_be32(&rtx->rxindex, rxindex); return(c); } static int smc_tstc(void) { - volatile smc_uart_t *up; - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - volatile cpm8xx_t *cpmp = &(im->im_cpm); - volatile serialbuffer_t *rtx; - - up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC]; + immap_t __iomem *im = (immap_t __iomem *)CONFIG_SYS_IMMR; + cpm8xx_t __iomem *cpmp = &(im->im_cpm); + struct serialbuffer __iomem *rtx; - rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase]; + rtx = (struct serialbuffer __iomem *)&cpmp->cp_dpmem[CPM_SERIAL_BASE]; - return !(rtx->rxbd.cbd_sc & BD_SC_EMPTY); + return !(in_be16(&rtx->rxbd.cbd_sc) & BD_SC_EMPTY); } struct serial_device serial_smc_device = |