diff options
Diffstat (limited to 'board/cm_t35')
-rw-r--r-- | board/cm_t35/Makefile | 1 | ||||
-rw-r--r-- | board/cm_t35/cm_t35.c | 16 | ||||
-rw-r--r-- | board/cm_t35/display.c | 428 |
3 files changed, 444 insertions, 1 deletions
diff --git a/board/cm_t35/Makefile b/board/cm_t35/Makefile index 894fa09..bde56e6 100644 --- a/board/cm_t35/Makefile +++ b/board/cm_t35/Makefile @@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += eeprom.o +COBJS-$(CONFIG_LCD) += display.o COBJS := cm_t35.o leds.o $(COBJS-y) diff --git a/board/cm_t35/cm_t35.c b/board/cm_t35/cm_t35.c index edbb941..e0e8235 100644 --- a/board/cm_t35/cm_t35.c +++ b/board/cm_t35/cm_t35.c @@ -33,6 +33,7 @@ #include <net.h> #include <i2c.h> #include <usb.h> +#include <mmc.h> #include <twl4030.h> #include <linux/compiler.h> @@ -216,6 +217,9 @@ static void cm_t3x_set_common_muxconf(void) /* SB-T35 Ethernet */ MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)); /*GPMC_nCS4*/ + /* DVI enable */ + MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | DIS | M4));/*GPMC_nCS3*/ + /* CM-T3x Ethernet */ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M0)); /*GPMC_nCS5*/ MUX_VAL(CP(GPMC_CLK), (IEN | PTD | DIS | M4)); /*GPIO_59*/ @@ -377,9 +381,19 @@ void set_muxconf_regs(void) } #ifdef CONFIG_GENERIC_MMC +int board_mmc_getcd(struct mmc *mmc) +{ + u8 val; + + if (twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, &val, TWL4030_BASEADD_GPIO)) + return -1; + + return !(val & 1); +} + int board_mmc_init(bd_t *bis) { - return omap_mmc_init(0, 0, 0); + return omap_mmc_init(0, 0, 0, -1, 59); } #endif diff --git a/board/cm_t35/display.c b/board/cm_t35/display.c new file mode 100644 index 0000000..2f78bad --- /dev/null +++ b/board/cm_t35/display.c @@ -0,0 +1,428 @@ +/* + * (C) Copyright 2012 CompuLab, Ltd. <www.compulab.co.il> + * + * Authors: Nikita Kiryanov <nikita@compulab.co.il> + * + * Parsing code based on linux/drivers/video/pxafb.c + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ +#include <common.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <stdio_dev.h> +#include <asm/arch/dss.h> +#include <lcd.h> +#include <asm/arch-omap3/dss.h> + +DECLARE_GLOBAL_DATA_PTR; + +enum display_type { + NONE, + DVI, + DVI_CUSTOM, +}; + +#define CMAP_ADDR 0x80100000 + +/* + * The frame buffer is allocated before we have the chance to parse user input. + * To make sure enough memory is allocated for all resolutions, we define + * vl_{col | row} to the maximal resolution supported by OMAP3. + */ +vidinfo_t panel_info = { + .vl_col = 1400, + .vl_row = 1050, + .vl_bpix = LCD_BPP, + .cmap = (ushort *)CMAP_ADDR, +}; + +static struct panel_config panel_cfg; +static enum display_type lcd_def; + +/* + * A note on DVI presets; + * U-Boot can convert 8 bit BMP data to 16 bit BMP data, and OMAP DSS can + * convert 16 bit data into 24 bit data. Thus, GFXFORMAT_RGB16 allows us to + * support two BMP types with one setting. + */ +static const struct panel_config preset_dvi_640X480 = { + .lcd_size = PANEL_LCD_SIZE(640, 480), + .timing_h = DSS_HBP(48) | DSS_HFP(16) | DSS_HSW(96), + .timing_v = DSS_VBP(33) | DSS_VFP(10) | DSS_VSW(2), + .divisor = 12 | (1 << 16), + .data_lines = LCD_INTERFACE_24_BIT, + .panel_type = ACTIVE_DISPLAY, + .load_mode = 2, + .gfx_format = GFXFORMAT_RGB16, +}; + +static const struct panel_config preset_dvi_800X600 = { + .lcd_size = PANEL_LCD_SIZE(800, 600), + .timing_h = DSS_HBP(88) | DSS_HFP(40) | DSS_HSW(128), + .timing_v = DSS_VBP(23) | DSS_VFP(1) | DSS_VSW(4), + .divisor = 8 | (1 << 16), + .data_lines = LCD_INTERFACE_24_BIT, + .panel_type = ACTIVE_DISPLAY, + .load_mode = 2, + .gfx_format = GFXFORMAT_RGB16, +}; + +static const struct panel_config preset_dvi_1024X768 = { + .lcd_size = PANEL_LCD_SIZE(1024, 768), + .timing_h = DSS_HBP(160) | DSS_HFP(24) | DSS_HSW(136), + .timing_v = DSS_VBP(29) | DSS_VFP(3) | DSS_VSW(6), + .divisor = 5 | (1 << 16), + .data_lines = LCD_INTERFACE_24_BIT, + .panel_type = ACTIVE_DISPLAY, + .load_mode = 2, + .gfx_format = GFXFORMAT_RGB16, +}; + +static const struct panel_config preset_dvi_1152X864 = { + .lcd_size = PANEL_LCD_SIZE(1152, 864), + .timing_h = DSS_HBP(256) | DSS_HFP(64) | DSS_HSW(128), + .timing_v = DSS_VBP(32) | DSS_VFP(1) | DSS_VSW(3), + .divisor = 3 | (1 << 16), + .data_lines = LCD_INTERFACE_24_BIT, + .panel_type = ACTIVE_DISPLAY, + .load_mode = 2, + .gfx_format = GFXFORMAT_RGB16, +}; + +static const struct panel_config preset_dvi_1280X960 = { + .lcd_size = PANEL_LCD_SIZE(1280, 960), + .timing_h = DSS_HBP(312) | DSS_HFP(96) | DSS_HSW(112), + .timing_v = DSS_VBP(36) | DSS_VFP(1) | DSS_VSW(3), + .divisor = 3 | (1 << 16), + .data_lines = LCD_INTERFACE_24_BIT, + .panel_type = ACTIVE_DISPLAY, + .load_mode = 2, + .gfx_format = GFXFORMAT_RGB16, +}; + +static const struct panel_config preset_dvi_1280X1024 = { + .lcd_size = PANEL_LCD_SIZE(1280, 1024), + .timing_h = DSS_HBP(248) | DSS_HFP(48) | DSS_HSW(112), + .timing_v = DSS_VBP(38) | DSS_VFP(1) | DSS_VSW(3), + .divisor = 3 | (1 << 16), + .data_lines = LCD_INTERFACE_24_BIT, + .panel_type = ACTIVE_DISPLAY, + .load_mode = 2, + .gfx_format = GFXFORMAT_RGB16, +}; + +/* + * set_resolution_params() + * + * Due to usage of multiple display related APIs resolution data is located in + * more than one place. This function updates them all. + */ +static void set_resolution_params(int x, int y) +{ + panel_cfg.lcd_size = PANEL_LCD_SIZE(x, y); + panel_info.vl_col = x; + panel_info.vl_row = y; + lcd_line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8; +} + +static void set_preset(const struct panel_config preset, int x_res, int y_res) +{ + panel_cfg = preset; + set_resolution_params(x_res, y_res); +} + +static enum display_type set_dvi_preset(const struct panel_config preset, + int x_res, int y_res) +{ + set_preset(preset, x_res, y_res); + return DVI; +} + +/* + * parse_mode() - parse the mode parameter of custom lcd settings + * + * @mode: <res_x>x<res_y> + * + * Returns -1 on error, 0 on success. + */ +static int parse_mode(const char *mode) +{ + unsigned int modelen = strlen(mode); + int res_specified = 0; + unsigned int xres = 0, yres = 0; + int yres_specified = 0; + int i; + + for (i = modelen - 1; i >= 0; i--) { + switch (mode[i]) { + case 'x': + if (!yres_specified) { + yres = simple_strtoul(&mode[i + 1], NULL, 0); + yres_specified = 1; + } else { + goto done_parsing; + } + + break; + case '0' ... '9': + break; + default: + goto done_parsing; + } + } + + if (i < 0 && yres_specified) { + xres = simple_strtoul(mode, NULL, 0); + res_specified = 1; + } + +done_parsing: + if (res_specified) { + set_resolution_params(xres, yres); + } else { + printf("LCD: invalid mode: %s\n", mode); + return -1; + } + + return 0; +} + +#define PIXEL_CLK_NUMERATOR (26 * 432 / 39) +/* + * parse_pixclock() - Parse the pixclock parameter of custom lcd settings + * + * @pixclock: the desired pixel clock + * + * Returns -1 on error, 0 on success. + * + * Handling the pixel_clock: + * + * Pixel clock is defined in the OMAP35x TRM as follows: + * pixel_clock = + * (SYS_CLK * 2 * PRCM.CM_CLKSEL2_PLL[18:8]) / + * (DSS.DISPC_DIVISOR[23:16] * DSS.DISPC_DIVISOR[6:0] * + * PRCM.CM_CLKSEL_DSS[4:0] * (PRCM.CM_CLKSEL2_PLL[6:0] + 1)) + * + * In practice, this means that in order to set the + * divisor for the desired pixel clock one needs to + * solve the following equation: + * + * 26 * 432 / (39 * <pixel_clock>) = DSS.DISPC_DIVISOR[6:0] + * + * NOTE: the explicit equation above is reduced. Do not + * try to infer anything from these numbers. + */ +static int parse_pixclock(char *pixclock) +{ + int divisor, pixclock_val; + char *pixclk_start = pixclock; + + pixclock_val = simple_strtoul(pixclock, &pixclock, 10); + divisor = DIV_ROUND_UP(PIXEL_CLK_NUMERATOR, pixclock_val); + /* 0 and 1 are illegal values for PCD */ + if (divisor <= 1) + divisor = 2; + + panel_cfg.divisor = divisor | (1 << 16); + if (pixclock[0] != '\0') { + printf("LCD: invalid value for pixclock:%s\n", pixclk_start); + return -1; + } + + return 0; +} + +/* + * parse_setting() - parse a single setting of custom lcd parameters + * + * @setting: The custom lcd setting <name>:<value> + * + * Returns -1 on failure, 0 on success. + */ +static int parse_setting(char *setting) +{ + int num_val; + char *setting_start = setting; + + if (!strncmp(setting, "mode:", 5)) { + return parse_mode(setting + 5); + } else if (!strncmp(setting, "pixclock:", 9)) { + return parse_pixclock(setting + 9); + } else if (!strncmp(setting, "left:", 5)) { + num_val = simple_strtoul(setting + 5, &setting, 0); + panel_cfg.timing_h |= DSS_HBP(num_val); + } else if (!strncmp(setting, "right:", 6)) { + num_val = simple_strtoul(setting + 6, &setting, 0); + panel_cfg.timing_h |= DSS_HFP(num_val); + } else if (!strncmp(setting, "upper:", 6)) { + num_val = simple_strtoul(setting + 6, &setting, 0); + panel_cfg.timing_v |= DSS_VBP(num_val); + } else if (!strncmp(setting, "lower:", 6)) { + num_val = simple_strtoul(setting + 6, &setting, 0); + panel_cfg.timing_v |= DSS_VFP(num_val); + } else if (!strncmp(setting, "hsynclen:", 9)) { + num_val = simple_strtoul(setting + 9, &setting, 0); + panel_cfg.timing_h |= DSS_HSW(num_val); + } else if (!strncmp(setting, "vsynclen:", 9)) { + num_val = simple_strtoul(setting + 9, &setting, 0); + panel_cfg.timing_v |= DSS_VSW(num_val); + } else if (!strncmp(setting, "hsync:", 6)) { + if (simple_strtoul(setting + 6, &setting, 0) == 0) + panel_cfg.pol_freq |= DSS_IHS; + else + panel_cfg.pol_freq &= ~DSS_IHS; + } else if (!strncmp(setting, "vsync:", 6)) { + if (simple_strtoul(setting + 6, &setting, 0) == 0) + panel_cfg.pol_freq |= DSS_IVS; + else + panel_cfg.pol_freq &= ~DSS_IVS; + } else if (!strncmp(setting, "outputen:", 9)) { + if (simple_strtoul(setting + 9, &setting, 0) == 0) + panel_cfg.pol_freq |= DSS_IEO; + else + panel_cfg.pol_freq &= ~DSS_IEO; + } else if (!strncmp(setting, "pixclockpol:", 12)) { + if (simple_strtoul(setting + 12, &setting, 0) == 0) + panel_cfg.pol_freq |= DSS_IPC; + else + panel_cfg.pol_freq &= ~DSS_IPC; + } else if (!strncmp(setting, "active", 6)) { + panel_cfg.panel_type = ACTIVE_DISPLAY; + return 0; /* Avoid sanity check below */ + } else if (!strncmp(setting, "passive", 7)) { + panel_cfg.panel_type = PASSIVE_DISPLAY; + return 0; /* Avoid sanity check below */ + } else if (!strncmp(setting, "display:", 8)) { + if (!strncmp(setting + 8, "dvi", 3)) { + lcd_def = DVI_CUSTOM; + return 0; /* Avoid sanity check below */ + } + } else { + printf("LCD: unknown option %s\n", setting_start); + return -1; + } + + if (setting[0] != '\0') { + printf("LCD: invalid value for %s\n", setting_start); + return -1; + } + + return 0; +} + +/* + * env_parse_customlcd() - parse custom lcd params from an environment variable. + * + * @custom_lcd_params: The environment variable containing the lcd params. + * + * Returns -1 on failure, 0 on success. + */ +static int parse_customlcd(char *custom_lcd_params) +{ + char params_cpy[160]; + char *setting; + + strncpy(params_cpy, custom_lcd_params, 160); + setting = strtok(params_cpy, ","); + while (setting) { + if (parse_setting(setting) < 0) + return -1; + + setting = strtok(NULL, ","); + } + + /* Currently we don't support changing this via custom lcd params */ + panel_cfg.data_lines = LCD_INTERFACE_24_BIT; + panel_cfg.gfx_format = GFXFORMAT_RGB16; /* See dvi predefines note */ + + return 0; +} + +/* + * env_parse_displaytype() - parse display type. + * + * Parses the environment variable "displaytype", which contains the + * name of the display type or preset, in which case it applies its + * configurations. + * + * Returns the type of display that was specified. + */ +static enum display_type env_parse_displaytype(char *displaytype) +{ + if (!strncmp(displaytype, "dvi640x480", 10)) + return set_dvi_preset(preset_dvi_640X480, 640, 480); + else if (!strncmp(displaytype, "dvi800x600", 10)) + return set_dvi_preset(preset_dvi_800X600, 800, 600); + else if (!strncmp(displaytype, "dvi1024x768", 11)) + return set_dvi_preset(preset_dvi_1024X768, 1024, 768); + else if (!strncmp(displaytype, "dvi1152x864", 11)) + return set_dvi_preset(preset_dvi_1152X864, 1152, 864); + else if (!strncmp(displaytype, "dvi1280x960", 11)) + return set_dvi_preset(preset_dvi_1280X960, 1280, 960); + else if (!strncmp(displaytype, "dvi1280x1024", 12)) + return set_dvi_preset(preset_dvi_1280X1024, 1280, 1024); + + return NONE; +} + +int lcd_line_length; +int lcd_color_fg; +int lcd_color_bg; +void *lcd_base; +short console_col; +short console_row; +void *lcd_console_address; + +void lcd_ctrl_init(void *lcdbase) +{ + struct prcm *prcm = (struct prcm *)PRCM_BASE; + char *custom_lcd; + char *displaytype = getenv("displaytype"); + + if (displaytype == NULL) + return; + + lcd_def = env_parse_displaytype(displaytype); + /* If we did not recognize the preset, check if it's an env variable */ + if (lcd_def == NONE) { + custom_lcd = getenv(displaytype); + if (custom_lcd == NULL || parse_customlcd(custom_lcd) < 0) + return; + } + + panel_cfg.frame_buffer = lcdbase; + omap3_dss_panel_config(&panel_cfg); + /* + * Pixel clock is defined with many divisions and only few + * multiplications of the system clock. Since DSS FCLK divisor is set + * to 16 by default, we need to set it to a smaller value, like 3 + * (chosen via trial and error). + */ + clrsetbits_le32(&prcm->clksel_dss, 0xF, 3); +} + +void lcd_enable(void) +{ + if (lcd_def == DVI || lcd_def == DVI_CUSTOM) { + gpio_direction_output(54, 0); /* Turn on DVI */ + omap3_dss_enable(); + } +} + +void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue) {} |