summaryrefslogtreecommitdiff
path: root/board/overo/overo.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/overo/overo.c')
-rw-r--r--board/overo/overo.c65
1 files changed, 64 insertions, 1 deletions
diff --git a/board/overo/overo.c b/board/overo/overo.c
index 4a20c7f..7b4064c 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -31,6 +31,7 @@
#include <common.h>
#include <netdev.h>
#include <twl4030.h>
+#include <linux/mtd/nand.h>
#include <asm/io.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/mux.h>
@@ -100,6 +101,16 @@ int board_init(void)
}
/*
+ * Routine: omap_rev_string
+ * Description: For SPL builds output board rev
+ */
+#ifdef CONFIG_SPL_BUILD
+void omap_rev_string(void)
+{
+}
+#endif
+
+/*
* Routine: get_board_revision
* Description: Returns the board revision
*/
@@ -107,6 +118,20 @@ int get_board_revision(void)
{
int revision;
+#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+ unsigned char data;
+
+ /* board revisions <= R2410 connect 4030 irq_1 to gpio112 */
+ /* these boards should return a revision number of 0 */
+ /* the code below forces a 4030 RTC irq to ensure that gpio112 is low */
+ i2c_set_bus_num(TWL4030_I2C_BUS);
+ data = 0x01;
+ i2c_write(0x4B, 0x29, 1, &data, 1);
+ data = 0x0c;
+ i2c_write(0x4B, 0x2b, 1, &data, 1);
+ i2c_read(0x4B, 0x2a, 1, &data, 1);
+#endif
+
if (!gpio_request(112, "") &&
!gpio_request(113, "") &&
!gpio_request(115, "")) {
@@ -126,6 +151,44 @@ int get_board_revision(void)
return revision;
}
+#ifdef CONFIG_SPL_BUILD
+/*
+ * Routine: get_board_mem_timings
+ * Description: If we use SPL then there is no x-loader nor config header
+ * so we have to setup the DDR timings ourself on both banks.
+ */
+void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl,
+ u32 *mr)
+{
+ *mr = MICRON_V_MR_165;
+ switch (get_board_revision()) {
+ case REVISION_0: /* Micron 1286MB/256MB, 1/2 banks of 128MB */
+ *mcfg = MICRON_V_MCFG_165(128 << 20);
+ *ctrla = MICRON_V_ACTIMA_165;
+ *ctrlb = MICRON_V_ACTIMB_165;
+ *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+ break;
+ case REVISION_1: /* Micron 256MB/512MB, 1/2 banks of 256MB */
+ *mcfg = MICRON_V_MCFG_165(256 << 20);
+ *ctrla = MICRON_V_ACTIMA_165;
+ *ctrlb = MICRON_V_ACTIMB_165;
+ *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+ break;
+ case REVISION_2: /* Hynix 256MB/512MB, 1/2 banks of 256MB */
+ *mcfg = HYNIX_V_MCFG_165(256 << 20);
+ *ctrla = HYNIX_V_ACTIMA_165;
+ *ctrlb = HYNIX_V_ACTIMB_165;
+ *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+ break;
+ default:
+ *mcfg = MICRON_V_MCFG_165(128 << 20);
+ *ctrla = MICRON_V_ACTIMA_165;
+ *ctrlb = MICRON_V_ACTIMB_165;
+ *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+ }
+}
+#endif
+
/*
* Routine: get_sdio2_config
* Description: Return information about the wifi module connection
@@ -337,7 +400,7 @@ int board_eth_init(bd_t *bis)
return rc;
}
-#ifdef CONFIG_GENERIC_MMC
+#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
omap_mmc_init(0);