From d23dc394aa69093b6326ad917db04dc0d1aff3f8 Mon Sep 17 00:00:00 2001 From: Sergei Poselenov Date: Fri, 6 Jun 2008 15:52:44 +0200 Subject: PHY: Add support for the M88E1121R Marvell chip. Signed-off-by: Yuri Tikhonov Signed-off-by: Sergei Poselenov Signed-off-by: Ben Warren diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index 6e0f2c6..e50d516 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -1157,6 +1157,54 @@ struct phy_info phy_info_M88E1118 = { }, }; +/* + * Since to access LED register we need do switch the page, we + * do LED configuring in the miim_read-like function as follows + */ +uint mii_88E1121_set_led (uint mii_reg, struct tsec_private *priv) +{ + uint pg; + + /* Switch the page to access the led register */ + pg = read_phy_reg(priv, MIIM_88E1121_PHY_PAGE); + write_phy_reg(priv, MIIM_88E1121_PHY_PAGE, MIIM_88E1121_PHY_LED_PAGE); + + /* Configure leds */ + write_phy_reg(priv, MIIM_88E1121_PHY_LED_CTRL, + MIIM_88E1121_PHY_LED_DEF); + + /* Restore the page pointer */ + write_phy_reg(priv, MIIM_88E1121_PHY_PAGE, pg); + return 0; +} + +struct phy_info phy_info_M88E1121R = { + 0x01410cb, + "Marvell 88E1121R", + 4, + (struct phy_cmd[]){ /* config */ + /* Reset and configure the PHY */ + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, + {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL}, + {MIIM_ANAR, MIIM_ANAR_INIT, NULL}, + /* Configure leds */ + {MIIM_88E1121_PHY_LED_CTRL, miim_read, + &mii_88E1121_set_led}, + {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, + {miim_end,} + }, + (struct phy_cmd[]){ /* startup */ + /* Status is read once to clear old link state */ + {MIIM_STATUS, miim_read, NULL}, + {MIIM_STATUS, miim_read, &mii_parse_sr}, + {MIIM_STATUS, miim_read, &mii_parse_link}, + {miim_end,} + }, + (struct phy_cmd[]){ /* shutdown */ + {miim_end,} + }, +}; + static unsigned int m88e1145_setmode(uint mii_reg, struct tsec_private *priv) { uint mii_data = read_phy_reg(priv, mii_reg); @@ -1522,6 +1570,7 @@ struct phy_info *phy_info[] = { &phy_info_M88E1011S, &phy_info_M88E1111S, &phy_info_M88E1118, + &phy_info_M88E1121R, &phy_info_M88E1145, &phy_info_M88E1149S, &phy_info_dm9161, diff --git a/drivers/net/tsec.h b/drivers/net/tsec.h index 6a2338b..fee5934 100644 --- a/drivers/net/tsec.h +++ b/drivers/net/tsec.h @@ -184,6 +184,13 @@ #define MIIM_88E1111_PHY_LED_DIRECT 0x4100 #define MIIM_88E1111_PHY_LED_COMBINE 0x411C +/* 88E1121 PHY LED Control Register */ +#define MIIM_88E1121_PHY_LED_CTRL 16 +#define MIIM_88E1121_PHY_LED_PAGE 3 +#define MIIM_88E1121_PHY_LED_DEF 0x0030 + +#define MIIM_88E1121_PHY_PAGE 22 + /* 88E1145 Extended PHY Specific Control Register */ #define MIIM_88E1145_PHY_EXT_CR 20 #define MIIM_M88E1145_RGMII_RX_DELAY 0x0080 -- cgit v0.10.2 From dd3d1f56a01f460d560766126ee7dfed2ea9bc10 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Sun, 31 Aug 2008 16:33:25 -0500 Subject: tsec: Move tsec.h to include/ This is to prepare the way for board code passing in the tsec_info structure Signed-off-by: Andy Fleming Signed-off-by: Ben Warren diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index e50d516..59d41e9 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -16,8 +16,8 @@ #include #include #include +#include -#include "tsec.h" #include "miiphy.h" DECLARE_GLOBAL_DATA_PTR; @@ -32,12 +32,6 @@ typedef volatile struct rtxbd { rxbd8_t rxbd[PKTBUFSRX]; } RTXBD; -struct tsec_info_struct { - unsigned int phyaddr; - u32 flags; - unsigned int phyregidx; -}; - /* The tsec_info structure contains 3 values which the * driver uses to determine how to operate a given ethernet * device. The information needed is: diff --git a/drivers/net/tsec.h b/drivers/net/tsec.h deleted file mode 100644 index fee5934..0000000 --- a/drivers/net/tsec.h +++ /dev/null @@ -1,586 +0,0 @@ -/* - * tsec.h - * - * Driver for the Motorola Triple Speed Ethernet Controller - * - * This software may be used and distributed according to the - * terms of the GNU Public License, Version 2, incorporated - * herein by reference. - * - * Copyright 2004, 2007 Freescale Semiconductor, Inc. - * (C) Copyright 2003, Motorola, Inc. - * maintained by Xianghua Xiao (x.xiao@motorola.com) - * author Andy Fleming - * - */ - -#ifndef __TSEC_H -#define __TSEC_H - -#include -#include - -#ifndef CFG_TSEC1_OFFSET - #define CFG_TSEC1_OFFSET (0x24000) -#endif - -#define TSEC_SIZE 0x01000 - -/* FIXME: Should these be pushed back to 83xx and 85xx config files? */ -#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) - #define TSEC_BASE_ADDR (CFG_IMMR + CFG_TSEC1_OFFSET) -#elif defined(CONFIG_MPC83XX) - #define TSEC_BASE_ADDR (CFG_IMMR + CFG_TSEC1_OFFSET) -#endif - - -#define MAC_ADDR_LEN 6 - -/* #define TSEC_TIMEOUT 1000000 */ -#define TSEC_TIMEOUT 1000 -#define TOUT_LOOP 1000000 - -#define PHY_AUTONEGOTIATE_TIMEOUT 5000 /* in ms */ - -/* MAC register bits */ -#define MACCFG1_SOFT_RESET 0x80000000 -#define MACCFG1_RESET_RX_MC 0x00080000 -#define MACCFG1_RESET_TX_MC 0x00040000 -#define MACCFG1_RESET_RX_FUN 0x00020000 -#define MACCFG1_RESET_TX_FUN 0x00010000 -#define MACCFG1_LOOPBACK 0x00000100 -#define MACCFG1_RX_FLOW 0x00000020 -#define MACCFG1_TX_FLOW 0x00000010 -#define MACCFG1_SYNCD_RX_EN 0x00000008 -#define MACCFG1_RX_EN 0x00000004 -#define MACCFG1_SYNCD_TX_EN 0x00000002 -#define MACCFG1_TX_EN 0x00000001 - -#define MACCFG2_INIT_SETTINGS 0x00007205 -#define MACCFG2_FULL_DUPLEX 0x00000001 -#define MACCFG2_IF 0x00000300 -#define MACCFG2_GMII 0x00000200 -#define MACCFG2_MII 0x00000100 - -#define ECNTRL_INIT_SETTINGS 0x00001000 -#define ECNTRL_TBI_MODE 0x00000020 -#define ECNTRL_R100 0x00000008 -#define ECNTRL_SGMII_MODE 0x00000002 - -#define miim_end -2 -#define miim_read -1 - -#ifndef CFG_TBIPA_VALUE - #define CFG_TBIPA_VALUE 0x1f -#endif -#define MIIMCFG_INIT_VALUE 0x00000003 -#define MIIMCFG_RESET 0x80000000 - -#define MIIMIND_BUSY 0x00000001 -#define MIIMIND_NOTVALID 0x00000004 - -#define MIIM_CONTROL 0x00 -#define MIIM_CONTROL_RESET 0x00009140 -#define MIIM_CONTROL_INIT 0x00001140 -#define MIIM_CONTROL_RESTART 0x00001340 -#define MIIM_ANEN 0x00001000 - -#define MIIM_CR 0x00 -#define MIIM_CR_RST 0x00008000 -#define MIIM_CR_INIT 0x00001000 - -#define MIIM_STATUS 0x1 -#define MIIM_STATUS_AN_DONE 0x00000020 -#define MIIM_STATUS_LINK 0x0004 -#define PHY_BMSR_AUTN_ABLE 0x0008 -#define PHY_BMSR_AUTN_COMP 0x0020 - -#define MIIM_PHYIR1 0x2 -#define MIIM_PHYIR2 0x3 - -#define MIIM_ANAR 0x4 -#define MIIM_ANAR_INIT 0x1e1 - -#define MIIM_TBI_ANLPBPA 0x5 -#define MIIM_TBI_ANLPBPA_HALF 0x00000040 -#define MIIM_TBI_ANLPBPA_FULL 0x00000020 - -#define MIIM_TBI_ANEX 0x6 -#define MIIM_TBI_ANEX_NP 0x00000004 -#define MIIM_TBI_ANEX_PRX 0x00000002 - -#define MIIM_GBIT_CONTROL 0x9 -#define MIIM_GBIT_CONTROL_INIT 0xe00 - -#define MIIM_EXT_PAGE_ACCESS 0x1f - -/* Broadcom BCM54xx -- taken from linux sungem_phy */ -#define MIIM_BCM54xx_AUXSTATUS 0x19 -#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK 0x0700 -#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT 8 - -/* Cicada Auxiliary Control/Status Register */ -#define MIIM_CIS8201_AUX_CONSTAT 0x1c -#define MIIM_CIS8201_AUXCONSTAT_INIT 0x0004 -#define MIIM_CIS8201_AUXCONSTAT_DUPLEX 0x0020 -#define MIIM_CIS8201_AUXCONSTAT_SPEED 0x0018 -#define MIIM_CIS8201_AUXCONSTAT_GBIT 0x0010 -#define MIIM_CIS8201_AUXCONSTAT_100 0x0008 - -/* Cicada Extended Control Register 1 */ -#define MIIM_CIS8201_EXT_CON1 0x17 -#define MIIM_CIS8201_EXTCON1_INIT 0x0000 - -/* Cicada 8204 Extended PHY Control Register 1 */ -#define MIIM_CIS8204_EPHY_CON 0x17 -#define MIIM_CIS8204_EPHYCON_INIT 0x0006 -#define MIIM_CIS8204_EPHYCON_RGMII 0x1100 - -/* Cicada 8204 Serial LED Control Register */ -#define MIIM_CIS8204_SLED_CON 0x1b -#define MIIM_CIS8204_SLEDCON_INIT 0x1115 - -#define MIIM_GBIT_CON 0x09 -#define MIIM_GBIT_CON_ADVERT 0x0e00 - -/* Entry for Vitesse VSC8244 regs starts here */ -/* Vitesse VSC8244 Auxiliary Control/Status Register */ -#define MIIM_VSC8244_AUX_CONSTAT 0x1c -#define MIIM_VSC8244_AUXCONSTAT_INIT 0x0000 -#define MIIM_VSC8244_AUXCONSTAT_DUPLEX 0x0020 -#define MIIM_VSC8244_AUXCONSTAT_SPEED 0x0018 -#define MIIM_VSC8244_AUXCONSTAT_GBIT 0x0010 -#define MIIM_VSC8244_AUXCONSTAT_100 0x0008 -#define MIIM_CONTROL_INIT_LOOPBACK 0x4000 - -/* Vitesse VSC8244 Extended PHY Control Register 1 */ -#define MIIM_VSC8244_EPHY_CON 0x17 -#define MIIM_VSC8244_EPHYCON_INIT 0x0006 - -/* Vitesse VSC8244 Serial LED Control Register */ -#define MIIM_VSC8244_LED_CON 0x1b -#define MIIM_VSC8244_LEDCON_INIT 0xF011 - -/* Entry for Vitesse VSC8601 regs starts here (Not complete) */ -/* Vitesse VSC8601 Extended PHY Control Register 1 */ -#define MIIM_VSC8601_EPHY_CON 0x17 -#define MIIM_VSC8601_EPHY_CON_INIT_SKEW 0x1120 -#define MIIM_VSC8601_SKEW_CTRL 0x1c - -/* 88E1011 PHY Status Register */ -#define MIIM_88E1011_PHY_STATUS 0x11 -#define MIIM_88E1011_PHYSTAT_SPEED 0xc000 -#define MIIM_88E1011_PHYSTAT_GBIT 0x8000 -#define MIIM_88E1011_PHYSTAT_100 0x4000 -#define MIIM_88E1011_PHYSTAT_DUPLEX 0x2000 -#define MIIM_88E1011_PHYSTAT_SPDDONE 0x0800 -#define MIIM_88E1011_PHYSTAT_LINK 0x0400 - -#define MIIM_88E1011_PHY_SCR 0x10 -#define MIIM_88E1011_PHY_MDI_X_AUTO 0x0060 - -/* 88E1111 PHY LED Control Register */ -#define MIIM_88E1111_PHY_LED_CONTROL 24 -#define MIIM_88E1111_PHY_LED_DIRECT 0x4100 -#define MIIM_88E1111_PHY_LED_COMBINE 0x411C - -/* 88E1121 PHY LED Control Register */ -#define MIIM_88E1121_PHY_LED_CTRL 16 -#define MIIM_88E1121_PHY_LED_PAGE 3 -#define MIIM_88E1121_PHY_LED_DEF 0x0030 - -#define MIIM_88E1121_PHY_PAGE 22 - -/* 88E1145 Extended PHY Specific Control Register */ -#define MIIM_88E1145_PHY_EXT_CR 20 -#define MIIM_M88E1145_RGMII_RX_DELAY 0x0080 -#define MIIM_M88E1145_RGMII_TX_DELAY 0x0002 - -#define MIIM_88E1145_PHY_PAGE 29 -#define MIIM_88E1145_PHY_CAL_OV 30 - -/* RTL8211B PHY Status Register */ -#define MIIM_RTL8211B_PHY_STATUS 0x11 -#define MIIM_RTL8211B_PHYSTAT_SPEED 0xc000 -#define MIIM_RTL8211B_PHYSTAT_GBIT 0x8000 -#define MIIM_RTL8211B_PHYSTAT_100 0x4000 -#define MIIM_RTL8211B_PHYSTAT_DUPLEX 0x2000 -#define MIIM_RTL8211B_PHYSTAT_SPDDONE 0x0800 -#define MIIM_RTL8211B_PHYSTAT_LINK 0x0400 - -/* DM9161 Control register values */ -#define MIIM_DM9161_CR_STOP 0x0400 -#define MIIM_DM9161_CR_RSTAN 0x1200 - -#define MIIM_DM9161_SCR 0x10 -#define MIIM_DM9161_SCR_INIT 0x0610 - -/* DM9161 Specified Configuration and Status Register */ -#define MIIM_DM9161_SCSR 0x11 -#define MIIM_DM9161_SCSR_100F 0x8000 -#define MIIM_DM9161_SCSR_100H 0x4000 -#define MIIM_DM9161_SCSR_10F 0x2000 -#define MIIM_DM9161_SCSR_10H 0x1000 - -/* DM9161 10BT Configuration/Status */ -#define MIIM_DM9161_10BTCSR 0x12 -#define MIIM_DM9161_10BTCSR_INIT 0x7800 - -/* LXT971 Status 2 registers */ -#define MIIM_LXT971_SR2 0x11 /* Status Register 2 */ -#define MIIM_LXT971_SR2_SPEED_MASK 0x4200 -#define MIIM_LXT971_SR2_10HDX 0x0000 /* 10 Mbit half duplex selected */ -#define MIIM_LXT971_SR2_10FDX 0x0200 /* 10 Mbit full duplex selected */ -#define MIIM_LXT971_SR2_100HDX 0x4000 /* 100 Mbit half duplex selected */ -#define MIIM_LXT971_SR2_100FDX 0x4200 /* 100 Mbit full duplex selected */ - -/* DP83865 Control register values */ -#define MIIM_DP83865_CR_INIT 0x9200 - -/* DP83865 Link and Auto-Neg Status Register */ -#define MIIM_DP83865_LANR 0x11 -#define MIIM_DP83865_SPD_MASK 0x0018 -#define MIIM_DP83865_SPD_1000 0x0010 -#define MIIM_DP83865_SPD_100 0x0008 -#define MIIM_DP83865_DPX_FULL 0x0002 - -#define MIIM_READ_COMMAND 0x00000001 - -#define MRBLR_INIT_SETTINGS PKTSIZE_ALIGN - -#define MINFLR_INIT_SETTINGS 0x00000040 - -#define DMACTRL_INIT_SETTINGS 0x000000c3 -#define DMACTRL_GRS 0x00000010 -#define DMACTRL_GTS 0x00000008 - -#define TSTAT_CLEAR_THALT 0x80000000 -#define RSTAT_CLEAR_RHALT 0x00800000 - - -#define IEVENT_INIT_CLEAR 0xffffffff -#define IEVENT_BABR 0x80000000 -#define IEVENT_RXC 0x40000000 -#define IEVENT_BSY 0x20000000 -#define IEVENT_EBERR 0x10000000 -#define IEVENT_MSRO 0x04000000 -#define IEVENT_GTSC 0x02000000 -#define IEVENT_BABT 0x01000000 -#define IEVENT_TXC 0x00800000 -#define IEVENT_TXE 0x00400000 -#define IEVENT_TXB 0x00200000 -#define IEVENT_TXF 0x00100000 -#define IEVENT_IE 0x00080000 -#define IEVENT_LC 0x00040000 -#define IEVENT_CRL 0x00020000 -#define IEVENT_XFUN 0x00010000 -#define IEVENT_RXB0 0x00008000 -#define IEVENT_GRSC 0x00000100 -#define IEVENT_RXF0 0x00000080 - -#define IMASK_INIT_CLEAR 0x00000000 -#define IMASK_TXEEN 0x00400000 -#define IMASK_TXBEN 0x00200000 -#define IMASK_TXFEN 0x00100000 -#define IMASK_RXFEN0 0x00000080 - - -/* Default Attribute fields */ -#define ATTR_INIT_SETTINGS 0x000000c0 -#define ATTRELI_INIT_SETTINGS 0x00000000 - - -/* TxBD status field bits */ -#define TXBD_READY 0x8000 -#define TXBD_PADCRC 0x4000 -#define TXBD_WRAP 0x2000 -#define TXBD_INTERRUPT 0x1000 -#define TXBD_LAST 0x0800 -#define TXBD_CRC 0x0400 -#define TXBD_DEF 0x0200 -#define TXBD_HUGEFRAME 0x0080 -#define TXBD_LATECOLLISION 0x0080 -#define TXBD_RETRYLIMIT 0x0040 -#define TXBD_RETRYCOUNTMASK 0x003c -#define TXBD_UNDERRUN 0x0002 -#define TXBD_STATS 0x03ff - -/* RxBD status field bits */ -#define RXBD_EMPTY 0x8000 -#define RXBD_RO1 0x4000 -#define RXBD_WRAP 0x2000 -#define RXBD_INTERRUPT 0x1000 -#define RXBD_LAST 0x0800 -#define RXBD_FIRST 0x0400 -#define RXBD_MISS 0x0100 -#define RXBD_BROADCAST 0x0080 -#define RXBD_MULTICAST 0x0040 -#define RXBD_LARGE 0x0020 -#define RXBD_NONOCTET 0x0010 -#define RXBD_SHORT 0x0008 -#define RXBD_CRCERR 0x0004 -#define RXBD_OVERRUN 0x0002 -#define RXBD_TRUNCATED 0x0001 -#define RXBD_STATS 0x003f - -typedef struct txbd8 -{ - ushort status; /* Status Fields */ - ushort length; /* Buffer length */ - uint bufPtr; /* Buffer Pointer */ -} txbd8_t; - -typedef struct rxbd8 -{ - ushort status; /* Status Fields */ - ushort length; /* Buffer Length */ - uint bufPtr; /* Buffer Pointer */ -} rxbd8_t; - -typedef struct rmon_mib -{ - /* Transmit and Receive Counters */ - uint tr64; /* Transmit and Receive 64-byte Frame Counter */ - uint tr127; /* Transmit and Receive 65-127 byte Frame Counter */ - uint tr255; /* Transmit and Receive 128-255 byte Frame Counter */ - uint tr511; /* Transmit and Receive 256-511 byte Frame Counter */ - uint tr1k; /* Transmit and Receive 512-1023 byte Frame Counter */ - uint trmax; /* Transmit and Receive 1024-1518 byte Frame Counter */ - uint trmgv; /* Transmit and Receive 1519-1522 byte Good VLAN Frame */ - /* Receive Counters */ - uint rbyt; /* Receive Byte Counter */ - uint rpkt; /* Receive Packet Counter */ - uint rfcs; /* Receive FCS Error Counter */ - uint rmca; /* Receive Multicast Packet (Counter) */ - uint rbca; /* Receive Broadcast Packet */ - uint rxcf; /* Receive Control Frame Packet */ - uint rxpf; /* Receive Pause Frame Packet */ - uint rxuo; /* Receive Unknown OP Code */ - uint raln; /* Receive Alignment Error */ - uint rflr; /* Receive Frame Length Error */ - uint rcde; /* Receive Code Error */ - uint rcse; /* Receive Carrier Sense Error */ - uint rund; /* Receive Undersize Packet */ - uint rovr; /* Receive Oversize Packet */ - uint rfrg; /* Receive Fragments */ - uint rjbr; /* Receive Jabber */ - uint rdrp; /* Receive Drop */ - /* Transmit Counters */ - uint tbyt; /* Transmit Byte Counter */ - uint tpkt; /* Transmit Packet */ - uint tmca; /* Transmit Multicast Packet */ - uint tbca; /* Transmit Broadcast Packet */ - uint txpf; /* Transmit Pause Control Frame */ - uint tdfr; /* Transmit Deferral Packet */ - uint tedf; /* Transmit Excessive Deferral Packet */ - uint tscl; /* Transmit Single Collision Packet */ - /* (0x2_n700) */ - uint tmcl; /* Transmit Multiple Collision Packet */ - uint tlcl; /* Transmit Late Collision Packet */ - uint txcl; /* Transmit Excessive Collision Packet */ - uint tncl; /* Transmit Total Collision */ - - uint res2; - - uint tdrp; /* Transmit Drop Frame */ - uint tjbr; /* Transmit Jabber Frame */ - uint tfcs; /* Transmit FCS Error */ - uint txcf; /* Transmit Control Frame */ - uint tovr; /* Transmit Oversize Frame */ - uint tund; /* Transmit Undersize Frame */ - uint tfrg; /* Transmit Fragments Frame */ - /* General Registers */ - uint car1; /* Carry Register One */ - uint car2; /* Carry Register Two */ - uint cam1; /* Carry Register One Mask */ - uint cam2; /* Carry Register Two Mask */ -} rmon_mib_t; - -typedef struct tsec_hash_regs -{ - uint iaddr0; /* Individual Address Register 0 */ - uint iaddr1; /* Individual Address Register 1 */ - uint iaddr2; /* Individual Address Register 2 */ - uint iaddr3; /* Individual Address Register 3 */ - uint iaddr4; /* Individual Address Register 4 */ - uint iaddr5; /* Individual Address Register 5 */ - uint iaddr6; /* Individual Address Register 6 */ - uint iaddr7; /* Individual Address Register 7 */ - uint res1[24]; - uint gaddr0; /* Group Address Register 0 */ - uint gaddr1; /* Group Address Register 1 */ - uint gaddr2; /* Group Address Register 2 */ - uint gaddr3; /* Group Address Register 3 */ - uint gaddr4; /* Group Address Register 4 */ - uint gaddr5; /* Group Address Register 5 */ - uint gaddr6; /* Group Address Register 6 */ - uint gaddr7; /* Group Address Register 7 */ - uint res2[24]; -} tsec_hash_t; - -typedef struct tsec -{ - /* General Control and Status Registers (0x2_n000) */ - uint res000[4]; - - uint ievent; /* Interrupt Event */ - uint imask; /* Interrupt Mask */ - uint edis; /* Error Disabled */ - uint res01c; - uint ecntrl; /* Ethernet Control */ - uint minflr; /* Minimum Frame Length */ - uint ptv; /* Pause Time Value */ - uint dmactrl; /* DMA Control */ - uint tbipa; /* TBI PHY Address */ - - uint res034[3]; - uint res040[48]; - - /* Transmit Control and Status Registers (0x2_n100) */ - uint tctrl; /* Transmit Control */ - uint tstat; /* Transmit Status */ - uint res108; - uint tbdlen; /* Tx BD Data Length */ - uint res110[5]; - uint ctbptr; /* Current TxBD Pointer */ - uint res128[23]; - uint tbptr; /* TxBD Pointer */ - uint res188[30]; - /* (0x2_n200) */ - uint res200; - uint tbase; /* TxBD Base Address */ - uint res208[42]; - uint ostbd; /* Out of Sequence TxBD */ - uint ostbdp; /* Out of Sequence Tx Data Buffer Pointer */ - uint res2b8[18]; - - /* Receive Control and Status Registers (0x2_n300) */ - uint rctrl; /* Receive Control */ - uint rstat; /* Receive Status */ - uint res308; - uint rbdlen; /* RxBD Data Length */ - uint res310[4]; - uint res320; - uint crbptr; /* Current Receive Buffer Pointer */ - uint res328[6]; - uint mrblr; /* Maximum Receive Buffer Length */ - uint res344[16]; - uint rbptr; /* RxBD Pointer */ - uint res388[30]; - /* (0x2_n400) */ - uint res400; - uint rbase; /* RxBD Base Address */ - uint res408[62]; - - /* MAC Registers (0x2_n500) */ - uint maccfg1; /* MAC Configuration #1 */ - uint maccfg2; /* MAC Configuration #2 */ - uint ipgifg; /* Inter Packet Gap/Inter Frame Gap */ - uint hafdup; /* Half-duplex */ - uint maxfrm; /* Maximum Frame */ - uint res514; - uint res518; - - uint res51c; - - uint miimcfg; /* MII Management: Configuration */ - uint miimcom; /* MII Management: Command */ - uint miimadd; /* MII Management: Address */ - uint miimcon; /* MII Management: Control */ - uint miimstat; /* MII Management: Status */ - uint miimind; /* MII Management: Indicators */ - - uint res538; - - uint ifstat; /* Interface Status */ - uint macstnaddr1; /* Station Address, part 1 */ - uint macstnaddr2; /* Station Address, part 2 */ - uint res548[46]; - - /* (0x2_n600) */ - uint res600[32]; - - /* RMON MIB Registers (0x2_n680-0x2_n73c) */ - rmon_mib_t rmon; - uint res740[48]; - - /* Hash Function Registers (0x2_n800) */ - tsec_hash_t hash; - - uint res900[128]; - - /* Pattern Registers (0x2_nb00) */ - uint resb00[62]; - uint attr; /* Default Attribute Register */ - uint attreli; /* Default Attribute Extract Length and Index */ - - /* TSEC Future Expansion Space (0x2_nc00-0x2_nffc) */ - uint resc00[256]; -} tsec_t; - -#define TSEC_GIGABIT (1) - -/* This flag currently only has - * meaning if we're using the eTSEC */ -#define TSEC_REDUCED (1 << 1) - -struct tsec_private { - volatile tsec_t *regs; - volatile tsec_t *phyregs; - struct phy_info *phyinfo; - uint phyaddr; - u32 flags; - uint link; - uint duplexity; - uint speed; -}; - - -/* - * struct phy_cmd: A command for reading or writing a PHY register - * - * mii_reg: The register to read or write - * - * mii_data: For writes, the value to put in the register. - * A value of -1 indicates this is a read. - * - * funct: A function pointer which is invoked for each command. - * For reads, this function will be passed the value read - * from the PHY, and process it. - * For writes, the result of this function will be written - * to the PHY register - */ -struct phy_cmd { - uint mii_reg; - uint mii_data; - uint (*funct) (uint mii_reg, struct tsec_private * priv); -}; - -/* struct phy_info: a structure which defines attributes for a PHY - * - * id will contain a number which represents the PHY. During - * startup, the driver will poll the PHY to find out what its - * UID--as defined by registers 2 and 3--is. The 32-bit result - * gotten from the PHY will be shifted right by "shift" bits to - * discard any bits which may change based on revision numbers - * unimportant to functionality - * - * The struct phy_cmd entries represent pointers to an arrays of - * commands which tell the driver what to do to the PHY. - */ -struct phy_info { - uint id; - char *name; - uint shift; - /* Called to configure the PHY, and modify the controller - * based on the results */ - struct phy_cmd *config; - - /* Called when starting up the controller */ - struct phy_cmd *startup; - - /* Called when bringing down the controller */ - struct phy_cmd *shutdown; -}; - -#endif /* __TSEC_H */ diff --git a/include/tsec.h b/include/tsec.h new file mode 100644 index 0000000..83863ae --- /dev/null +++ b/include/tsec.h @@ -0,0 +1,592 @@ +/* + * tsec.h + * + * Driver for the Motorola Triple Speed Ethernet Controller + * + * This software may be used and distributed according to the + * terms of the GNU Public License, Version 2, incorporated + * herein by reference. + * + * Copyright 2004, 2007 Freescale Semiconductor, Inc. + * (C) Copyright 2003, Motorola, Inc. + * maintained by Xianghua Xiao (x.xiao@motorola.com) + * author Andy Fleming + * + */ + +#ifndef __TSEC_H +#define __TSEC_H + +#include +#include + +#ifndef CFG_TSEC1_OFFSET + #define CFG_TSEC1_OFFSET (0x24000) +#endif + +#define TSEC_SIZE 0x01000 + +/* FIXME: Should these be pushed back to 83xx and 85xx config files? */ +#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) + #define TSEC_BASE_ADDR (CFG_IMMR + CFG_TSEC1_OFFSET) +#elif defined(CONFIG_MPC83XX) + #define TSEC_BASE_ADDR (CFG_IMMR + CFG_TSEC1_OFFSET) +#endif + + +#define MAC_ADDR_LEN 6 + +/* #define TSEC_TIMEOUT 1000000 */ +#define TSEC_TIMEOUT 1000 +#define TOUT_LOOP 1000000 + +#define PHY_AUTONEGOTIATE_TIMEOUT 5000 /* in ms */ + +/* MAC register bits */ +#define MACCFG1_SOFT_RESET 0x80000000 +#define MACCFG1_RESET_RX_MC 0x00080000 +#define MACCFG1_RESET_TX_MC 0x00040000 +#define MACCFG1_RESET_RX_FUN 0x00020000 +#define MACCFG1_RESET_TX_FUN 0x00010000 +#define MACCFG1_LOOPBACK 0x00000100 +#define MACCFG1_RX_FLOW 0x00000020 +#define MACCFG1_TX_FLOW 0x00000010 +#define MACCFG1_SYNCD_RX_EN 0x00000008 +#define MACCFG1_RX_EN 0x00000004 +#define MACCFG1_SYNCD_TX_EN 0x00000002 +#define MACCFG1_TX_EN 0x00000001 + +#define MACCFG2_INIT_SETTINGS 0x00007205 +#define MACCFG2_FULL_DUPLEX 0x00000001 +#define MACCFG2_IF 0x00000300 +#define MACCFG2_GMII 0x00000200 +#define MACCFG2_MII 0x00000100 + +#define ECNTRL_INIT_SETTINGS 0x00001000 +#define ECNTRL_TBI_MODE 0x00000020 +#define ECNTRL_R100 0x00000008 +#define ECNTRL_SGMII_MODE 0x00000002 + +#define miim_end -2 +#define miim_read -1 + +#ifndef CFG_TBIPA_VALUE + #define CFG_TBIPA_VALUE 0x1f +#endif +#define MIIMCFG_INIT_VALUE 0x00000003 +#define MIIMCFG_RESET 0x80000000 + +#define MIIMIND_BUSY 0x00000001 +#define MIIMIND_NOTVALID 0x00000004 + +#define MIIM_CONTROL 0x00 +#define MIIM_CONTROL_RESET 0x00009140 +#define MIIM_CONTROL_INIT 0x00001140 +#define MIIM_CONTROL_RESTART 0x00001340 +#define MIIM_ANEN 0x00001000 + +#define MIIM_CR 0x00 +#define MIIM_CR_RST 0x00008000 +#define MIIM_CR_INIT 0x00001000 + +#define MIIM_STATUS 0x1 +#define MIIM_STATUS_AN_DONE 0x00000020 +#define MIIM_STATUS_LINK 0x0004 +#define PHY_BMSR_AUTN_ABLE 0x0008 +#define PHY_BMSR_AUTN_COMP 0x0020 + +#define MIIM_PHYIR1 0x2 +#define MIIM_PHYIR2 0x3 + +#define MIIM_ANAR 0x4 +#define MIIM_ANAR_INIT 0x1e1 + +#define MIIM_TBI_ANLPBPA 0x5 +#define MIIM_TBI_ANLPBPA_HALF 0x00000040 +#define MIIM_TBI_ANLPBPA_FULL 0x00000020 + +#define MIIM_TBI_ANEX 0x6 +#define MIIM_TBI_ANEX_NP 0x00000004 +#define MIIM_TBI_ANEX_PRX 0x00000002 + +#define MIIM_GBIT_CONTROL 0x9 +#define MIIM_GBIT_CONTROL_INIT 0xe00 + +#define MIIM_EXT_PAGE_ACCESS 0x1f + +/* Broadcom BCM54xx -- taken from linux sungem_phy */ +#define MIIM_BCM54xx_AUXSTATUS 0x19 +#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK 0x0700 +#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT 8 + +/* Cicada Auxiliary Control/Status Register */ +#define MIIM_CIS8201_AUX_CONSTAT 0x1c +#define MIIM_CIS8201_AUXCONSTAT_INIT 0x0004 +#define MIIM_CIS8201_AUXCONSTAT_DUPLEX 0x0020 +#define MIIM_CIS8201_AUXCONSTAT_SPEED 0x0018 +#define MIIM_CIS8201_AUXCONSTAT_GBIT 0x0010 +#define MIIM_CIS8201_AUXCONSTAT_100 0x0008 + +/* Cicada Extended Control Register 1 */ +#define MIIM_CIS8201_EXT_CON1 0x17 +#define MIIM_CIS8201_EXTCON1_INIT 0x0000 + +/* Cicada 8204 Extended PHY Control Register 1 */ +#define MIIM_CIS8204_EPHY_CON 0x17 +#define MIIM_CIS8204_EPHYCON_INIT 0x0006 +#define MIIM_CIS8204_EPHYCON_RGMII 0x1100 + +/* Cicada 8204 Serial LED Control Register */ +#define MIIM_CIS8204_SLED_CON 0x1b +#define MIIM_CIS8204_SLEDCON_INIT 0x1115 + +#define MIIM_GBIT_CON 0x09 +#define MIIM_GBIT_CON_ADVERT 0x0e00 + +/* Entry for Vitesse VSC8244 regs starts here */ +/* Vitesse VSC8244 Auxiliary Control/Status Register */ +#define MIIM_VSC8244_AUX_CONSTAT 0x1c +#define MIIM_VSC8244_AUXCONSTAT_INIT 0x0000 +#define MIIM_VSC8244_AUXCONSTAT_DUPLEX 0x0020 +#define MIIM_VSC8244_AUXCONSTAT_SPEED 0x0018 +#define MIIM_VSC8244_AUXCONSTAT_GBIT 0x0010 +#define MIIM_VSC8244_AUXCONSTAT_100 0x0008 +#define MIIM_CONTROL_INIT_LOOPBACK 0x4000 + +/* Vitesse VSC8244 Extended PHY Control Register 1 */ +#define MIIM_VSC8244_EPHY_CON 0x17 +#define MIIM_VSC8244_EPHYCON_INIT 0x0006 + +/* Vitesse VSC8244 Serial LED Control Register */ +#define MIIM_VSC8244_LED_CON 0x1b +#define MIIM_VSC8244_LEDCON_INIT 0xF011 + +/* Entry for Vitesse VSC8601 regs starts here (Not complete) */ +/* Vitesse VSC8601 Extended PHY Control Register 1 */ +#define MIIM_VSC8601_EPHY_CON 0x17 +#define MIIM_VSC8601_EPHY_CON_INIT_SKEW 0x1120 +#define MIIM_VSC8601_SKEW_CTRL 0x1c + +/* 88E1011 PHY Status Register */ +#define MIIM_88E1011_PHY_STATUS 0x11 +#define MIIM_88E1011_PHYSTAT_SPEED 0xc000 +#define MIIM_88E1011_PHYSTAT_GBIT 0x8000 +#define MIIM_88E1011_PHYSTAT_100 0x4000 +#define MIIM_88E1011_PHYSTAT_DUPLEX 0x2000 +#define MIIM_88E1011_PHYSTAT_SPDDONE 0x0800 +#define MIIM_88E1011_PHYSTAT_LINK 0x0400 + +#define MIIM_88E1011_PHY_SCR 0x10 +#define MIIM_88E1011_PHY_MDI_X_AUTO 0x0060 + +/* 88E1111 PHY LED Control Register */ +#define MIIM_88E1111_PHY_LED_CONTROL 24 +#define MIIM_88E1111_PHY_LED_DIRECT 0x4100 +#define MIIM_88E1111_PHY_LED_COMBINE 0x411C + +/* 88E1121 PHY LED Control Register */ +#define MIIM_88E1121_PHY_LED_CTRL 16 +#define MIIM_88E1121_PHY_LED_PAGE 3 +#define MIIM_88E1121_PHY_LED_DEF 0x0030 + +#define MIIM_88E1121_PHY_PAGE 22 + +/* 88E1145 Extended PHY Specific Control Register */ +#define MIIM_88E1145_PHY_EXT_CR 20 +#define MIIM_M88E1145_RGMII_RX_DELAY 0x0080 +#define MIIM_M88E1145_RGMII_TX_DELAY 0x0002 + +#define MIIM_88E1145_PHY_PAGE 29 +#define MIIM_88E1145_PHY_CAL_OV 30 + +/* RTL8211B PHY Status Register */ +#define MIIM_RTL8211B_PHY_STATUS 0x11 +#define MIIM_RTL8211B_PHYSTAT_SPEED 0xc000 +#define MIIM_RTL8211B_PHYSTAT_GBIT 0x8000 +#define MIIM_RTL8211B_PHYSTAT_100 0x4000 +#define MIIM_RTL8211B_PHYSTAT_DUPLEX 0x2000 +#define MIIM_RTL8211B_PHYSTAT_SPDDONE 0x0800 +#define MIIM_RTL8211B_PHYSTAT_LINK 0x0400 + +/* DM9161 Control register values */ +#define MIIM_DM9161_CR_STOP 0x0400 +#define MIIM_DM9161_CR_RSTAN 0x1200 + +#define MIIM_DM9161_SCR 0x10 +#define MIIM_DM9161_SCR_INIT 0x0610 + +/* DM9161 Specified Configuration and Status Register */ +#define MIIM_DM9161_SCSR 0x11 +#define MIIM_DM9161_SCSR_100F 0x8000 +#define MIIM_DM9161_SCSR_100H 0x4000 +#define MIIM_DM9161_SCSR_10F 0x2000 +#define MIIM_DM9161_SCSR_10H 0x1000 + +/* DM9161 10BT Configuration/Status */ +#define MIIM_DM9161_10BTCSR 0x12 +#define MIIM_DM9161_10BTCSR_INIT 0x7800 + +/* LXT971 Status 2 registers */ +#define MIIM_LXT971_SR2 0x11 /* Status Register 2 */ +#define MIIM_LXT971_SR2_SPEED_MASK 0x4200 +#define MIIM_LXT971_SR2_10HDX 0x0000 /* 10 Mbit half duplex selected */ +#define MIIM_LXT971_SR2_10FDX 0x0200 /* 10 Mbit full duplex selected */ +#define MIIM_LXT971_SR2_100HDX 0x4000 /* 100 Mbit half duplex selected */ +#define MIIM_LXT971_SR2_100FDX 0x4200 /* 100 Mbit full duplex selected */ + +/* DP83865 Control register values */ +#define MIIM_DP83865_CR_INIT 0x9200 + +/* DP83865 Link and Auto-Neg Status Register */ +#define MIIM_DP83865_LANR 0x11 +#define MIIM_DP83865_SPD_MASK 0x0018 +#define MIIM_DP83865_SPD_1000 0x0010 +#define MIIM_DP83865_SPD_100 0x0008 +#define MIIM_DP83865_DPX_FULL 0x0002 + +#define MIIM_READ_COMMAND 0x00000001 + +#define MRBLR_INIT_SETTINGS PKTSIZE_ALIGN + +#define MINFLR_INIT_SETTINGS 0x00000040 + +#define DMACTRL_INIT_SETTINGS 0x000000c3 +#define DMACTRL_GRS 0x00000010 +#define DMACTRL_GTS 0x00000008 + +#define TSTAT_CLEAR_THALT 0x80000000 +#define RSTAT_CLEAR_RHALT 0x00800000 + + +#define IEVENT_INIT_CLEAR 0xffffffff +#define IEVENT_BABR 0x80000000 +#define IEVENT_RXC 0x40000000 +#define IEVENT_BSY 0x20000000 +#define IEVENT_EBERR 0x10000000 +#define IEVENT_MSRO 0x04000000 +#define IEVENT_GTSC 0x02000000 +#define IEVENT_BABT 0x01000000 +#define IEVENT_TXC 0x00800000 +#define IEVENT_TXE 0x00400000 +#define IEVENT_TXB 0x00200000 +#define IEVENT_TXF 0x00100000 +#define IEVENT_IE 0x00080000 +#define IEVENT_LC 0x00040000 +#define IEVENT_CRL 0x00020000 +#define IEVENT_XFUN 0x00010000 +#define IEVENT_RXB0 0x00008000 +#define IEVENT_GRSC 0x00000100 +#define IEVENT_RXF0 0x00000080 + +#define IMASK_INIT_CLEAR 0x00000000 +#define IMASK_TXEEN 0x00400000 +#define IMASK_TXBEN 0x00200000 +#define IMASK_TXFEN 0x00100000 +#define IMASK_RXFEN0 0x00000080 + + +/* Default Attribute fields */ +#define ATTR_INIT_SETTINGS 0x000000c0 +#define ATTRELI_INIT_SETTINGS 0x00000000 + + +/* TxBD status field bits */ +#define TXBD_READY 0x8000 +#define TXBD_PADCRC 0x4000 +#define TXBD_WRAP 0x2000 +#define TXBD_INTERRUPT 0x1000 +#define TXBD_LAST 0x0800 +#define TXBD_CRC 0x0400 +#define TXBD_DEF 0x0200 +#define TXBD_HUGEFRAME 0x0080 +#define TXBD_LATECOLLISION 0x0080 +#define TXBD_RETRYLIMIT 0x0040 +#define TXBD_RETRYCOUNTMASK 0x003c +#define TXBD_UNDERRUN 0x0002 +#define TXBD_STATS 0x03ff + +/* RxBD status field bits */ +#define RXBD_EMPTY 0x8000 +#define RXBD_RO1 0x4000 +#define RXBD_WRAP 0x2000 +#define RXBD_INTERRUPT 0x1000 +#define RXBD_LAST 0x0800 +#define RXBD_FIRST 0x0400 +#define RXBD_MISS 0x0100 +#define RXBD_BROADCAST 0x0080 +#define RXBD_MULTICAST 0x0040 +#define RXBD_LARGE 0x0020 +#define RXBD_NONOCTET 0x0010 +#define RXBD_SHORT 0x0008 +#define RXBD_CRCERR 0x0004 +#define RXBD_OVERRUN 0x0002 +#define RXBD_TRUNCATED 0x0001 +#define RXBD_STATS 0x003f + +typedef struct txbd8 +{ + ushort status; /* Status Fields */ + ushort length; /* Buffer length */ + uint bufPtr; /* Buffer Pointer */ +} txbd8_t; + +typedef struct rxbd8 +{ + ushort status; /* Status Fields */ + ushort length; /* Buffer Length */ + uint bufPtr; /* Buffer Pointer */ +} rxbd8_t; + +typedef struct rmon_mib +{ + /* Transmit and Receive Counters */ + uint tr64; /* Transmit and Receive 64-byte Frame Counter */ + uint tr127; /* Transmit and Receive 65-127 byte Frame Counter */ + uint tr255; /* Transmit and Receive 128-255 byte Frame Counter */ + uint tr511; /* Transmit and Receive 256-511 byte Frame Counter */ + uint tr1k; /* Transmit and Receive 512-1023 byte Frame Counter */ + uint trmax; /* Transmit and Receive 1024-1518 byte Frame Counter */ + uint trmgv; /* Transmit and Receive 1519-1522 byte Good VLAN Frame */ + /* Receive Counters */ + uint rbyt; /* Receive Byte Counter */ + uint rpkt; /* Receive Packet Counter */ + uint rfcs; /* Receive FCS Error Counter */ + uint rmca; /* Receive Multicast Packet (Counter) */ + uint rbca; /* Receive Broadcast Packet */ + uint rxcf; /* Receive Control Frame Packet */ + uint rxpf; /* Receive Pause Frame Packet */ + uint rxuo; /* Receive Unknown OP Code */ + uint raln; /* Receive Alignment Error */ + uint rflr; /* Receive Frame Length Error */ + uint rcde; /* Receive Code Error */ + uint rcse; /* Receive Carrier Sense Error */ + uint rund; /* Receive Undersize Packet */ + uint rovr; /* Receive Oversize Packet */ + uint rfrg; /* Receive Fragments */ + uint rjbr; /* Receive Jabber */ + uint rdrp; /* Receive Drop */ + /* Transmit Counters */ + uint tbyt; /* Transmit Byte Counter */ + uint tpkt; /* Transmit Packet */ + uint tmca; /* Transmit Multicast Packet */ + uint tbca; /* Transmit Broadcast Packet */ + uint txpf; /* Transmit Pause Control Frame */ + uint tdfr; /* Transmit Deferral Packet */ + uint tedf; /* Transmit Excessive Deferral Packet */ + uint tscl; /* Transmit Single Collision Packet */ + /* (0x2_n700) */ + uint tmcl; /* Transmit Multiple Collision Packet */ + uint tlcl; /* Transmit Late Collision Packet */ + uint txcl; /* Transmit Excessive Collision Packet */ + uint tncl; /* Transmit Total Collision */ + + uint res2; + + uint tdrp; /* Transmit Drop Frame */ + uint tjbr; /* Transmit Jabber Frame */ + uint tfcs; /* Transmit FCS Error */ + uint txcf; /* Transmit Control Frame */ + uint tovr; /* Transmit Oversize Frame */ + uint tund; /* Transmit Undersize Frame */ + uint tfrg; /* Transmit Fragments Frame */ + /* General Registers */ + uint car1; /* Carry Register One */ + uint car2; /* Carry Register Two */ + uint cam1; /* Carry Register One Mask */ + uint cam2; /* Carry Register Two Mask */ +} rmon_mib_t; + +typedef struct tsec_hash_regs +{ + uint iaddr0; /* Individual Address Register 0 */ + uint iaddr1; /* Individual Address Register 1 */ + uint iaddr2; /* Individual Address Register 2 */ + uint iaddr3; /* Individual Address Register 3 */ + uint iaddr4; /* Individual Address Register 4 */ + uint iaddr5; /* Individual Address Register 5 */ + uint iaddr6; /* Individual Address Register 6 */ + uint iaddr7; /* Individual Address Register 7 */ + uint res1[24]; + uint gaddr0; /* Group Address Register 0 */ + uint gaddr1; /* Group Address Register 1 */ + uint gaddr2; /* Group Address Register 2 */ + uint gaddr3; /* Group Address Register 3 */ + uint gaddr4; /* Group Address Register 4 */ + uint gaddr5; /* Group Address Register 5 */ + uint gaddr6; /* Group Address Register 6 */ + uint gaddr7; /* Group Address Register 7 */ + uint res2[24]; +} tsec_hash_t; + +typedef struct tsec +{ + /* General Control and Status Registers (0x2_n000) */ + uint res000[4]; + + uint ievent; /* Interrupt Event */ + uint imask; /* Interrupt Mask */ + uint edis; /* Error Disabled */ + uint res01c; + uint ecntrl; /* Ethernet Control */ + uint minflr; /* Minimum Frame Length */ + uint ptv; /* Pause Time Value */ + uint dmactrl; /* DMA Control */ + uint tbipa; /* TBI PHY Address */ + + uint res034[3]; + uint res040[48]; + + /* Transmit Control and Status Registers (0x2_n100) */ + uint tctrl; /* Transmit Control */ + uint tstat; /* Transmit Status */ + uint res108; + uint tbdlen; /* Tx BD Data Length */ + uint res110[5]; + uint ctbptr; /* Current TxBD Pointer */ + uint res128[23]; + uint tbptr; /* TxBD Pointer */ + uint res188[30]; + /* (0x2_n200) */ + uint res200; + uint tbase; /* TxBD Base Address */ + uint res208[42]; + uint ostbd; /* Out of Sequence TxBD */ + uint ostbdp; /* Out of Sequence Tx Data Buffer Pointer */ + uint res2b8[18]; + + /* Receive Control and Status Registers (0x2_n300) */ + uint rctrl; /* Receive Control */ + uint rstat; /* Receive Status */ + uint res308; + uint rbdlen; /* RxBD Data Length */ + uint res310[4]; + uint res320; + uint crbptr; /* Current Receive Buffer Pointer */ + uint res328[6]; + uint mrblr; /* Maximum Receive Buffer Length */ + uint res344[16]; + uint rbptr; /* RxBD Pointer */ + uint res388[30]; + /* (0x2_n400) */ + uint res400; + uint rbase; /* RxBD Base Address */ + uint res408[62]; + + /* MAC Registers (0x2_n500) */ + uint maccfg1; /* MAC Configuration #1 */ + uint maccfg2; /* MAC Configuration #2 */ + uint ipgifg; /* Inter Packet Gap/Inter Frame Gap */ + uint hafdup; /* Half-duplex */ + uint maxfrm; /* Maximum Frame */ + uint res514; + uint res518; + + uint res51c; + + uint miimcfg; /* MII Management: Configuration */ + uint miimcom; /* MII Management: Command */ + uint miimadd; /* MII Management: Address */ + uint miimcon; /* MII Management: Control */ + uint miimstat; /* MII Management: Status */ + uint miimind; /* MII Management: Indicators */ + + uint res538; + + uint ifstat; /* Interface Status */ + uint macstnaddr1; /* Station Address, part 1 */ + uint macstnaddr2; /* Station Address, part 2 */ + uint res548[46]; + + /* (0x2_n600) */ + uint res600[32]; + + /* RMON MIB Registers (0x2_n680-0x2_n73c) */ + rmon_mib_t rmon; + uint res740[48]; + + /* Hash Function Registers (0x2_n800) */ + tsec_hash_t hash; + + uint res900[128]; + + /* Pattern Registers (0x2_nb00) */ + uint resb00[62]; + uint attr; /* Default Attribute Register */ + uint attreli; /* Default Attribute Extract Length and Index */ + + /* TSEC Future Expansion Space (0x2_nc00-0x2_nffc) */ + uint resc00[256]; +} tsec_t; + +#define TSEC_GIGABIT (1) + +/* This flag currently only has + * meaning if we're using the eTSEC */ +#define TSEC_REDUCED (1 << 1) + +struct tsec_private { + volatile tsec_t *regs; + volatile tsec_t *phyregs; + struct phy_info *phyinfo; + uint phyaddr; + u32 flags; + uint link; + uint duplexity; + uint speed; +}; + + +/* + * struct phy_cmd: A command for reading or writing a PHY register + * + * mii_reg: The register to read or write + * + * mii_data: For writes, the value to put in the register. + * A value of -1 indicates this is a read. + * + * funct: A function pointer which is invoked for each command. + * For reads, this function will be passed the value read + * from the PHY, and process it. + * For writes, the result of this function will be written + * to the PHY register + */ +struct phy_cmd { + uint mii_reg; + uint mii_data; + uint (*funct) (uint mii_reg, struct tsec_private * priv); +}; + +/* struct phy_info: a structure which defines attributes for a PHY + * + * id will contain a number which represents the PHY. During + * startup, the driver will poll the PHY to find out what its + * UID--as defined by registers 2 and 3--is. The 32-bit result + * gotten from the PHY will be shifted right by "shift" bits to + * discard any bits which may change based on revision numbers + * unimportant to functionality + * + * The struct phy_cmd entries represent pointers to an arrays of + * commands which tell the driver what to do to the PHY. + */ +struct phy_info { + uint id; + char *name; + uint shift; + /* Called to configure the PHY, and modify the controller + * based on the results */ + struct phy_cmd *config; + + /* Called when starting up the controller */ + struct phy_cmd *startup; + + /* Called when bringing down the controller */ + struct phy_cmd *shutdown; +}; + +struct tsec_info_struct { + unsigned int phyaddr; + u32 flags; + unsigned int phyregidx; +}; + +#endif /* __TSEC_H */ -- cgit v0.10.2 From 75b9d4ae0d69f214eab641caf12ce8af83a39a42 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Sun, 31 Aug 2008 16:33:26 -0500 Subject: Pass in tsec_info struct through tsec_initialize The tsec driver contains a hard-coded array of configuration information for the tsec ethernet controllers. We create a default function that works for most tsecs, and allow that to be overridden by board code. It creates an array of tsec_info structures, which are then parsed by the corresponding driver instance to determine configuration. Also, add regs, miiregs, and devname fields to the tsec_info structure, so that we don't need the kludgy "index" parameter. Signed-off-by: Andy Fleming Signed-off-by: Ben Warren diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index 52e4476..5862acd 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -32,6 +32,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -358,22 +359,15 @@ int dma_xfer(void *dest, u32 count, void *src) } #endif /*CONFIG_DDR_ECC*/ -#ifdef CONFIG_TSEC_ENET -/* Default initializations for TSEC controllers. To override, - * create a board-specific function called: - * int board_eth_init(bd_t *bis) +/* + * Initializes on-chip ethernet controllers. + * to override, implement board_eth_init() */ - -extern int tsec_initialize(bd_t * bis, int index, char *devname); - int cpu_eth_init(bd_t *bis) { -#if defined(CONFIG_TSEC1) - tsec_initialize(bis, 0, CONFIG_TSEC1_NAME); -#endif -#if defined(CONFIG_TSEC2) - tsec_initialize(bis, 1, CONFIG_TSEC2_NAME); +#if defined(CONFIG_TSEC_ENET) + tsec_standard_init(bis); #endif + return 0; } -#endif diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c index 2fe3cea..7976cac 100644 --- a/cpu/mpc85xx/cpu.c +++ b/cpu/mpc85xx/cpu.c @@ -25,9 +25,11 @@ * MA 02111-1307 USA */ +#include #include #include #include +#include #include #include @@ -294,6 +296,7 @@ int dma_xfer(void *dest, uint count, void *src) { return dma_check(); } #endif + /* * Configures a UPM. Currently, the loop fields in MxMR (RLF, WLF and TLF) * are hardcoded as "1"."size" is the number or entries, not a sizeof. @@ -360,32 +363,16 @@ void upmconfig (uint upm, uint * table, uint size) out_be32(mxmr, loopval); /* OP_NORMAL */ } -#if defined(CONFIG_TSEC_ENET) || defined(CONFIGMPC85XX_FEC) -/* Default initializations for TSEC controllers. To override, - * create a board-specific function called: - * int board_eth_init(bd_t *bis) - */ - -extern int tsec_initialize(bd_t * bis, int index, char *devname); +/* + * Initializes on-chip ethernet controllers. + * to override, implement board_eth_init() + */ int cpu_eth_init(bd_t *bis) { -#if defined(CONFIG_TSEC1) - tsec_initialize(bis, 0, CONFIG_TSEC1_NAME); -#endif -#if defined(CONFIG_TSEC2) - tsec_initialize(bis, 1, CONFIG_TSEC2_NAME); -#endif -#if defined(CONFIG_MPC85XX_FEC) - tsec_initialize(bis, 2, CONFIG_MPC85XX_FEC_NAME); -#else -#if defined(CONFIG_TSEC3) - tsec_initialize(bis, 2, CONFIG_TSEC3_NAME); -#endif -#if defined(CONFIG_TSEC4) - tsec_initialize(bis, 3, CONFIG_TSEC4_NAME); -#endif +#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_MPC85xx_FEC) + tsec_standard_init(bis); #endif + return 0; } -#endif diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c index ecea5b0..3a75af7 100644 --- a/cpu/mpc86xx/cpu.c +++ b/cpu/mpc86xx/cpu.c @@ -28,6 +28,7 @@ #include #include #include +#include #include @@ -305,28 +306,15 @@ void mpc86xx_reginfo(void) } -#ifdef CONFIG_TSEC_ENET -/* Default initializations for TSEC controllers. To override, - * create a board-specific function called: - * int board_eth_init(bd_t *bis) +/* + * Initializes on-chip ethernet controllers. + * to override, implement board_eth_init() */ - -extern int tsec_initialize(bd_t * bis, int index, char *devname); - int cpu_eth_init(bd_t *bis) { -#if defined(CONFIG_TSEC1) - tsec_initialize(bis, 0, CONFIG_TSEC1_NAME); -#endif -#if defined(CONFIG_TSEC2) - tsec_initialize(bis, 1, CONFIG_TSEC2_NAME); -#endif -#if defined(CONFIG_TSEC3) - tsec_initialize(bis, 2, CONFIG_TSEC3_NAME); -#endif -#if defined(CONFIG_TSEC4) - tsec_initialize(bis, 3, CONFIG_TSEC4_NAME); +#if defined(CONFIG_TSEC_ENET) + tsec_standard_init(bis); #endif + return 0; } -#endif /* CONFIG_TSEC_ENET */ diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index 59d41e9..fbbdd3d 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -32,63 +32,12 @@ typedef volatile struct rtxbd { rxbd8_t rxbd[PKTBUFSRX]; } RTXBD; -/* The tsec_info structure contains 3 values which the - * driver uses to determine how to operate a given ethernet - * device. The information needed is: - * phyaddr - The address of the PHY which is attached to - * the given device. - * - * flags - This variable indicates whether the device - * supports gigabit speed ethernet, and whether it should be - * in reduced mode. - * - * phyregidx - This variable specifies which ethernet device - * controls the MII Management registers which are connected - * to the PHY. For now, only TSEC1 (index 0) has - * access to the PHYs, so all of the entries have "0". - * - * The values specified in the table are taken from the board's - * config file in include/configs/. When implementing a new - * board with ethernet capability, it is necessary to define: - * TSECn_PHY_ADDR - * TSECn_PHYIDX - * - * for n = 1,2,3, etc. And for FEC: - * FEC_PHY_ADDR - * FEC_PHYIDX - */ -static struct tsec_info_struct tsec_info[] = { -#ifdef CONFIG_TSEC1 - {TSEC1_PHY_ADDR, TSEC1_FLAGS, TSEC1_PHYIDX}, -#else - {0, 0, 0}, -#endif -#ifdef CONFIG_TSEC2 - {TSEC2_PHY_ADDR, TSEC2_FLAGS, TSEC2_PHYIDX}, -#else - {0, 0, 0}, -#endif -#ifdef CONFIG_MPC85XX_FEC - {FEC_PHY_ADDR, FEC_FLAGS, FEC_PHYIDX}, -#else -#ifdef CONFIG_TSEC3 - {TSEC3_PHY_ADDR, TSEC3_FLAGS, TSEC3_PHYIDX}, -#else - {0, 0, 0}, -#endif -#ifdef CONFIG_TSEC4 - {TSEC4_PHY_ADDR, TSEC4_FLAGS, TSEC4_PHYIDX}, -#else - {0, 0, 0}, -#endif /* CONFIG_TSEC4 */ -#endif /* CONFIG_MPC85XX_FEC */ -}; - -#define MAXCONTROLLERS (4) +#define MAXCONTROLLERS (8) static int relocated = 0; static struct tsec_private *privlist[MAXCONTROLLERS]; +static int num_tsecs = 0; #ifdef __GNUC__ static RTXBD rtx __attribute__ ((aligned(8))); @@ -121,10 +70,51 @@ static int tsec_miiphy_read(char *devname, unsigned char addr, static int tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set); #endif +/* Default initializations for TSEC controllers. */ + +static struct tsec_info_struct tsec_info[] = { +#ifdef CONFIG_TSEC1 + STD_TSEC_INFO(1), /* TSEC1 */ +#endif +#ifdef CONFIG_TSEC2 + STD_TSEC_INFO(2), /* TSEC2 */ +#endif +#ifdef CONFIG_MPC85XX_FEC + { + .regs = (tsec_t *)(TSEC_BASE_ADDR + 0x2000), + .miiregs = (tsec_t *)(TSEC_BASE_ADDR), + .devname = CONFIG_MPC85XX_FEC_NAME, + .phyaddr = FEC_PHY_ADDR, + .flags = FEC_FLAGS + }, /* FEC */ +#endif +#ifdef CONFIG_TSEC3 + STD_TSEC_INFO(3), /* TSEC3 */ +#endif +#ifdef CONFIG_TSEC4 + STD_TSEC_INFO(4), /* TSEC4 */ +#endif +}; + +int tsec_eth_init(bd_t *bis, struct tsec_info_struct *tsecs, int num) +{ + int i; + + for (i = 0; i < num; i++) + tsec_initialize(bis, &tsecs[i]); + + return 0; +} + +int tsec_standard_init(bd_t *bis) +{ + return tsec_eth_init(bis, tsec_info, ARRAY_SIZE(tsec_info)); +} + /* Initialize device structure. Returns success if PHY * initialization succeeded (i.e. if it recognizes the PHY) */ -int tsec_initialize(bd_t * bis, int index, char *devname) +int tsec_initialize(bd_t * bis, struct tsec_info_struct *tsec_info) { struct eth_device *dev; int i; @@ -142,16 +132,14 @@ int tsec_initialize(bd_t * bis, int index, char *devname) if (NULL == priv) return 0; - privlist[index] = priv; - priv->regs = (volatile tsec_t *)(TSEC_BASE_ADDR + index * TSEC_SIZE); - priv->phyregs = (volatile tsec_t *)(TSEC_BASE_ADDR + - tsec_info[index].phyregidx * - TSEC_SIZE); + privlist[num_tsecs++] = priv; + priv->regs = tsec_info->regs; + priv->phyregs = tsec_info->miiregs; - priv->phyaddr = tsec_info[index].phyaddr; - priv->flags = tsec_info[index].flags; + priv->phyaddr = tsec_info->phyaddr; + priv->flags = tsec_info->flags; - sprintf(dev->name, devname); + sprintf(dev->name, tsec_info->devname); dev->iobase = 0; dev->priv = priv; dev->init = tsec_init; @@ -226,7 +214,6 @@ int tsec_init(struct eth_device *dev, bd_t * bd) /* If there's no link, fail */ return (priv->link ? 0 : -1); - } /* Write value to the device's PHY through the registers diff --git a/include/tsec.h b/include/tsec.h index 83863ae..c05b5f0 100644 --- a/include/tsec.h +++ b/include/tsec.h @@ -27,12 +27,30 @@ #define TSEC_SIZE 0x01000 /* FIXME: Should these be pushed back to 83xx and 85xx config files? */ -#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) - #define TSEC_BASE_ADDR (CFG_IMMR + CFG_TSEC1_OFFSET) -#elif defined(CONFIG_MPC83XX) +#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) \ + || defined(CONFIG_MPC83XX) #define TSEC_BASE_ADDR (CFG_IMMR + CFG_TSEC1_OFFSET) #endif +#define STD_TSEC_INFO(num) \ +{ \ + .regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)), \ + .miiregs = (tsec_t *)TSEC_BASE_ADDR, \ + .devname = CONFIG_TSEC##num##_NAME, \ + .phyaddr = TSEC##num##_PHY_ADDR, \ + .flags = TSEC##num##_FLAGS \ +} + +#define SET_STD_TSEC_INFO(x, num) \ +{ \ + x.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)); \ + x.miiregs = (tsec_t *)TSEC_BASE_ADDR; \ + x.devname = CONFIG_TSEC##num##_NAME; \ + x.phyaddr = TSEC##num##_PHY_ADDR; \ + x.flags = TSEC##num##_FLAGS;\ +} + + #define MAC_ADDR_LEN 6 @@ -584,9 +602,15 @@ struct phy_info { }; struct tsec_info_struct { + tsec_t *regs; + tsec_t *miiregs; + char *devname; unsigned int phyaddr; u32 flags; - unsigned int phyregidx; }; +int tsec_initialize(bd_t * bis, struct tsec_info_struct *tsec_info); +int tsec_standard_init(bd_t *bis); +int tsec_eth_init(bd_t *bis, struct tsec_info_struct *tsec_info, int num); + #endif /* __TSEC_H */ -- cgit v0.10.2 From 2abe361c03b43e6dcf68f54e96b5c05156c49284 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Sun, 31 Aug 2008 16:33:27 -0500 Subject: Add SGMII support to the tsec Adds support for configuring the TBI to talk properly with the SerDes. Signed-off-by: Andy Fleming Signed-off-by: Ben Warren diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index fbbdd3d..f81211a 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -216,61 +216,80 @@ int tsec_init(struct eth_device *dev, bd_t * bd) return (priv->link ? 0 : -1); } -/* Write value to the device's PHY through the registers - * specified in priv, modifying the register specified in regnum. - * It will wait for the write to be done (or for a timeout to - * expire) before exiting - */ -void write_any_phy_reg(struct tsec_private *priv, uint phyid, uint regnum, uint value) +/* Writes the given phy's reg with value, using the specified MDIO regs */ +static void tsec_local_mdio_write(volatile tsec_t *phyregs, uint addr, + uint reg, uint value) { - volatile tsec_t *regbase = priv->phyregs; int timeout = 1000000; - regbase->miimadd = (phyid << 8) | regnum; - regbase->miimcon = value; + phyregs->miimadd = (addr << 8) | reg; + phyregs->miimcon = value; asm("sync"); timeout = 1000000; - while ((regbase->miimind & MIIMIND_BUSY) && timeout--) ; + while ((phyregs->miimind & MIIMIND_BUSY) && timeout--) ; } -/* #define to provide old write_phy_reg functionality without duplicating code */ -#define write_phy_reg(priv, regnum, value) write_any_phy_reg(priv,priv->phyaddr,regnum,value) + +/* Provide the default behavior of writing the PHY of this ethernet device */ +#define write_phy_reg(priv, regnum, value) tsec_local_mdio_write(priv->phyregs,priv->phyaddr,regnum,value) /* Reads register regnum on the device's PHY through the - * registers specified in priv. It lowers and raises the read + * specified registers. It lowers and raises the read * command, and waits for the data to become valid (miimind * notvalid bit cleared), and the bus to cease activity (miimind * busy bit cleared), and then returns the value */ -uint read_any_phy_reg(struct tsec_private *priv, uint phyid, uint regnum) +uint tsec_local_mdio_read(volatile tsec_t *phyregs, uint phyid, uint regnum) { uint value; - volatile tsec_t *regbase = priv->phyregs; /* Put the address of the phy, and the register * number into MIIMADD */ - regbase->miimadd = (phyid << 8) | regnum; + phyregs->miimadd = (phyid << 8) | regnum; /* Clear the command register, and wait */ - regbase->miimcom = 0; + phyregs->miimcom = 0; asm("sync"); /* Initiate a read command, and wait */ - regbase->miimcom = MIIM_READ_COMMAND; + phyregs->miimcom = MIIM_READ_COMMAND; asm("sync"); /* Wait for the the indication that the read is done */ - while ((regbase->miimind & (MIIMIND_NOTVALID | MIIMIND_BUSY))) ; + while ((phyregs->miimind & (MIIMIND_NOTVALID | MIIMIND_BUSY))) ; /* Grab the value read from the PHY */ - value = regbase->miimstat; + value = phyregs->miimstat; return value; } /* #define to provide old read_phy_reg functionality without duplicating code */ -#define read_phy_reg(priv,regnum) read_any_phy_reg(priv,priv->phyaddr,regnum) +#define read_phy_reg(priv,regnum) tsec_local_mdio_read(priv->phyregs,priv->phyaddr,regnum) + +#define TBIANA_SETTINGS ( \ + TBIANA_ASYMMETRIC_PAUSE \ + | TBIANA_SYMMETRIC_PAUSE \ + | TBIANA_FULL_DUPLEX \ + ) + +#define TBICR_SETTINGS ( \ + TBICR_PHY_RESET \ + | TBICR_ANEG_ENABLE \ + | TBICR_FULL_DUPLEX \ + | TBICR_SPEED1_SET \ + ) +/* Configure the TBI for SGMII operation */ +static void tsec_configure_serdes(struct tsec_private *priv) +{ + tsec_local_mdio_write(priv->phyregs, CFG_TBIPA_VALUE, TBI_ANA, + TBIANA_SETTINGS); + tsec_local_mdio_write(priv->phyregs, CFG_TBIPA_VALUE, TBI_TBICON, + TBICON_CLK_SELECT); + tsec_local_mdio_write(priv->phyregs, CFG_TBIPA_VALUE, TBI_CR, + TBICR_SETTINGS); +} /* Discover which PHY is attached to the device, and configure it * properly. If the PHY is not recognized, then return 0 @@ -280,12 +299,12 @@ static int init_phy(struct eth_device *dev) { struct tsec_private *priv = (struct tsec_private *)dev->priv; struct phy_info *curphy; - volatile tsec_t *regs = (volatile tsec_t *)(TSEC_BASE_ADDR); + volatile tsec_t *phyregs = priv->phyregs; + volatile tsec_t *regs = priv->regs; /* Assign a Physical address to the TBI */ regs->tbipa = CFG_TBIPA_VALUE; - regs = (volatile tsec_t *)(TSEC_BASE_ADDR + TSEC_SIZE); - regs->tbipa = CFG_TBIPA_VALUE; + phyregs->tbipa = CFG_TBIPA_VALUE; asm("sync"); /* Reset MII (due to new addresses) */ @@ -309,6 +328,9 @@ static int init_phy(struct eth_device *dev) return 0; } + if (regs->ecntrl & ECNTRL_SGMII_MODE) + tsec_configure_serdes(priv); + priv->phyinfo = curphy; phy_run_commands(priv, priv->phyinfo->config); @@ -1700,7 +1722,7 @@ static int tsec_miiphy_read(char *devname, unsigned char addr, return -1; } - ret = (unsigned short)read_any_phy_reg(priv, addr, reg); + ret = (unsigned short)tsec_local_mdio_read(priv->phyregs, addr, reg); *value = ret; return 0; @@ -1722,7 +1744,7 @@ static int tsec_miiphy_write(char *devname, unsigned char addr, return -1; } - write_any_phy_reg(priv, addr, reg, value); + tsec_local_mdio_write(priv->phyregs, addr, reg, value); return 0; } diff --git a/include/tsec.h b/include/tsec.h index c05b5f0..2db4deb 100644 --- a/include/tsec.h +++ b/include/tsec.h @@ -60,6 +60,27 @@ #define PHY_AUTONEGOTIATE_TIMEOUT 5000 /* in ms */ +/* TBI register addresses */ +#define TBI_CR 0x00 +#define TBI_SR 0x01 +#define TBI_ANA 0x04 +#define TBI_ANLPBPA 0x05 +#define TBI_ANEX 0x06 +#define TBI_TBICON 0x11 + +/* TBI MDIO register bit fields*/ +#define TBICON_CLK_SELECT 0x0020 +#define TBIANA_ASYMMETRIC_PAUSE 0x0100 +#define TBIANA_SYMMETRIC_PAUSE 0x0080 +#define TBIANA_HALF_DUPLEX 0x0040 +#define TBIANA_FULL_DUPLEX 0x0020 +#define TBICR_PHY_RESET 0x8000 +#define TBICR_ANEG_ENABLE 0x1000 +#define TBICR_RESTART_ANEG 0x0200 +#define TBICR_FULL_DUPLEX 0x0100 +#define TBICR_SPEED1_SET 0x0040 + + /* MAC register bits */ #define MACCFG1_SOFT_RESET 0x80000000 #define MACCFG1_RESET_RX_MC 0x00080000 @@ -540,7 +561,9 @@ typedef struct tsec /* This flag currently only has * meaning if we're using the eTSEC */ -#define TSEC_REDUCED (1 << 1) +#define TSEC_REDUCED (1 << 1) + +#define TSEC_SGMII (1 << 2) struct tsec_private { volatile tsec_t *regs; -- cgit v0.10.2 From 652f7c2eef76a1340928bd660845441e932d86a2 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Sun, 31 Aug 2008 16:33:28 -0500 Subject: Add support for Freescale SGMII Riser Card The 8544DS and 8572DS systems have an optional SGMII riser card which exposes new ethernet ports which are connected to the eTSECs via an SGMII interface. The SGMII PHYs for this board are offset from the standard PHY addresses, so this code modifies the passed in tsec_info structure to use the SGMII PHYs on the card, instead. Signed-off-by: Andy Fleming Signed-off-by: Ben Warren diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 508e3b5..8584374 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -36,6 +36,7 @@ COBJS-${CONFIG_FSL_DIU_FB} += fsl_diu_fb.o fsl_logo_bmp.o COBJS-${CONFIG_FSL_PIXIS} += pixis.o COBJS-${CONFIG_PQ_MDS_PIB} += pq-mds-pib.o COBJS-${CONFIG_ID_EEPROM} += sys_eeprom.o +COBJS-${CONFIG_FSL_SGMII_RISER} += sgmii_riser.o COBJS-${CONFIG_MPC8541CDS} += cds_pci_ft.o COBJS-${CONFIG_MPC8548CDS} += cds_pci_ft.o diff --git a/board/freescale/common/sgmii_riser.c b/board/freescale/common/sgmii_riser.c new file mode 100644 index 0000000..5ccd6bc --- /dev/null +++ b/board/freescale/common/sgmii_riser.c @@ -0,0 +1,26 @@ +/* + * Freescale SGMII Riser Card + * + * This driver supports the SGMII Riser card found on the + * "DS" style of development board from Freescale. + * + * This software may be used and distributed according to the + * terms of the GNU Public License, Version 2, incorporated + * herein by reference. + * + * Copyright 2008 Freescale Semiconductor, Inc. + * + */ + +#include +#include +#include + +void fsl_sgmii_riser_init(struct tsec_info_struct *tsec_info, int num) +{ + int i; + + for (i = 0; i < num; i++) + if (tsec_info[i].flags & TSEC_SGMII) + tsec_info[i].phyaddr += SGMII_RISER_PHY_OFFSET; +} diff --git a/board/freescale/common/sgmii_riser.h b/board/freescale/common/sgmii_riser.h new file mode 100644 index 0000000..8d56a1f --- /dev/null +++ b/board/freescale/common/sgmii_riser.h @@ -0,0 +1,15 @@ +/* + * Freescale SGMII Riser Card + * + * This driver supports the SGMII Riser card found on the + * "DS" style of development board from Freescale. + * + * This software may be used and distributed according to the + * terms of the GNU Public License, Version 2, incorporated + * herein by reference. + * + * Copyright 2008 Freescale Semiconductor, Inc. + * + */ + +void fsl_sgmii_riser_init(struct tsec_info_struct *tsec_info, int num); diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 5738192..a428e88 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -369,6 +369,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_TSEC3 1 #define CONFIG_TSEC3_NAME "eTSEC3" +#define CONFIG_FSL_SGMII_RISER 1 +#define SGMII_RISER_PHY_OFFSET 0x1c + #define TSEC1_PHY_ADDR 0 #define TSEC3_PHY_ADDR 1 -- cgit v0.10.2 From 216f2a7156a5fde7b47adc40ad553c888a9cbaa7 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Sun, 31 Aug 2008 16:33:29 -0500 Subject: Add SGMII support for the 8544 DS The 8544 DS has an optional SGMII Riser card, which uses different PHY addresses. Check if we are in SGMII mode, and invoke the SGMII Riser setup code if so. Signed-off-by: Andy Fleming Signed-off-by: Ben Warren diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index 4e976b7..1e29773 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -32,8 +32,10 @@ #include #include #include +#include #include "../common/pixis.h" +#include "../common/sgmii_riser.h" #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) extern void ddr_enable_ecc(unsigned int dram_size); @@ -463,6 +465,43 @@ get_board_sys_clk(ulong dummy) return val; } +#ifdef CONFIG_TSEC_ENET +int board_eth_init(bd_t *bis) +{ + struct tsec_info_struct tsec_info[2]; + volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); + uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; + int num = 0; + +#ifdef CONFIG_TSEC1 + SET_STD_TSEC_INFO(tsec_info[num], 1); + if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS)) + tsec_info[num].flags |= TSEC_SGMII; + num++; +#endif +#ifdef CONFIG_TSEC3 + SET_STD_TSEC_INFO(tsec_info[num], 3); + if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) + tsec_info[num].flags |= TSEC_SGMII; + num++; +#endif + + if (!num) { + printf("No TSECs initialized\n"); + + return 0; + } + + if (io_sel & 1) + fsl_sgmii_riser_init(tsec_info, num); + + + tsec_eth_init(bis, tsec_info, num); + + return 0; +} +#endif + #if defined(CONFIG_OF_BOARD_SETUP) void -- cgit v0.10.2 From 5a8a163ac394d9f4f7ff57f415d82bd673b0068c Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Sun, 31 Aug 2008 16:33:30 -0500 Subject: Add pixis_set_sgmii command The 8544DS and 8572DS platforms support an optional SGMII riser card to expose ethernet over an SGMII interface. Once the card is in, it is also necessary to configure the board such that it uses the card, rather than the on-board ethernet ports. This can either be done by flipping dip switches on the motherboard, or by modifying registers in the pixis. Either way requires a reboot. This adds a command to allow users to choose which ports are routed through the SGMII card, and which through the onboard ports. It also allows users to revert to the current switch settings. This code does not work on the 8572, as the PIXIS is different. Signed-off-by: Andy Fleming Signed-off-by: Ben Warren diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c index 64e2e08..b5a0e84 100644 --- a/board/freescale/common/pixis.c +++ b/board/freescale/common/pixis.c @@ -26,6 +26,7 @@ #include #include #include +#include #include "pixis.h" @@ -282,6 +283,60 @@ U_BOOT_CMD( "diswd - Disable watchdog timer \n", NULL); +#ifdef CONFIG_FSL_SGMII_RISER +int pixis_set_sgmii(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int which_tsec = -1; + uchar mask; + uchar switch_mask; + + if (argc > 2) + if (strcmp(argv[1], "all") != 0) + which_tsec = simple_strtoul(argv[1], NULL, 0); + + switch (which_tsec) { + case 1: + mask = PIXIS_VSPEED2_TSEC1SER; + switch_mask = PIXIS_VCFGEN1_TSEC1SER; + break; + case 3: + mask = PIXIS_VSPEED2_TSEC3SER; + switch_mask = PIXIS_VCFGEN1_TSEC3SER; + break; + default: + mask = PIXIS_VSPEED2_TSEC1SER | PIXIS_VSPEED2_TSEC3SER; + switch_mask = PIXIS_VCFGEN1_TSEC1SER | PIXIS_VCFGEN1_TSEC3SER; + break; + } + + /* Toggle whether the switches or FPGA control the settings */ + if (!strcmp(argv[argc - 1], "switch")) + clrbits_8((unsigned char *)PIXIS_BASE + PIXIS_VCFGEN1, + switch_mask); + else + setbits_8((unsigned char *)PIXIS_BASE + PIXIS_VCFGEN1, + switch_mask); + + /* If it's not the switches, enable or disable SGMII, as specified */ + if (!strcmp(argv[argc - 1], "on")) + clrbits_8((unsigned char *)PIXIS_BASE + PIXIS_VSPEED2, mask); + else if (!strcmp(argv[argc - 1], "off")) + setbits_8((unsigned char *)PIXIS_BASE + PIXIS_VSPEED2, mask); + + return 0; +} + +U_BOOT_CMD( + pixis_set_sgmii, CFG_MAXARGS, 1, pixis_set_sgmii, + "pixis_set_sgmii" + " - Enable or disable SGMII mode for a given TSEC \n", + "\npixis_set_sgmii [TSEC num] \n" + " TSEC num: 1,2,3,4 or 'all'. 'all' is default.\n" + " on - enables SGMII\n" + " off - disables SGMII\n" + " switch - use switch settings\n"); +#endif + /* * This function takes the non-integral cpu:mpx pll ratio * and converts it to an integer that can be used to assign diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index a428e88..612e8f2 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -196,7 +196,12 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ #define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ +#define PIXIS_VSPEED2 0x1d /* VELA VSpeed 2 */ #define CFG_PIXIS_VBOOT_MASK 0x40 /* Reset altbank mask*/ +#define PIXIS_VSPEED2_TSEC1SER 0x2 +#define PIXIS_VSPEED2_TSEC3SER 0x1 +#define PIXIS_VCFGEN1_TSEC1SER 0x20 +#define PIXIS_VCFGEN1_TSEC3SER 0x40 /* define to use L1 as initial stack */ -- cgit v0.10.2 From 89973f8a82c28ad893c4c3cc56839a8e10fe5f13 Mon Sep 17 00:00:00 2001 From: Ben Warren Date: Sun, 31 Aug 2008 22:22:04 -0700 Subject: Introduce netdev.h header file and remove externs This addresses all drivers whose initializers have already been moved to board_eth_init()/cpu_eth_init(). Signed-off-by: Ben Warren diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c index 7f3e485..fa1a2aa 100644 --- a/board/atmel/atngw100/atngw100.c +++ b/board/atmel/atngw100/atngw100.c @@ -26,6 +26,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -93,8 +94,6 @@ void board_init_info(void) gd->bd->bi_phy_id[1] = 0x03; } -extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); - #ifdef CONFIG_CMD_NET int board_eth_init(bd_t *bi) { diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c index 915b1c3..94523b5 100644 --- a/board/atmel/atstk1000/atstk1000.c +++ b/board/atmel/atstk1000/atstk1000.c @@ -26,6 +26,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -116,8 +117,6 @@ void board_init_info(void) gd->bd->bi_phy_id[1] = 0x11; } -extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); - #ifdef CONFIG_CMD_NET int board_eth_init(bd_t *bi) { diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c index a9b7a68..4567213 100644 --- a/board/bf537-stamp/bf537-stamp.c +++ b/board/bf537-stamp/bf537-stamp.c @@ -32,6 +32,7 @@ #include #include #include +#include /** * is_valid_ether_addr - Determine if the given Ethernet address is valid @@ -156,8 +157,6 @@ int misc_init_r(void) #if defined(CONFIG_BFIN_MAC) -extern int bfin_EMAC_initialize(bd_t *bis); - int board_eth_init(bd_t *bis) { return bfin_EMAC_initialize(bis); diff --git a/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c b/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c index da69e75..da05589 100644 --- a/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c +++ b/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c @@ -18,6 +18,7 @@ * Place, Suite 330, Boston, MA 02111-1307 USA */ #include +#include #include #include @@ -87,8 +88,6 @@ void board_init_info(void) } #if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET) -extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); - int board_eth_init(bd_t *bi) { return macb_eth_initialize(0, (void *)MACB0_BASE, bi->bi_phy_id[0]); diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c index af79fc2..130f7aa 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c @@ -32,6 +32,7 @@ #include #include #include +#include #include "../common/pixis.h" @@ -520,12 +521,7 @@ get_board_sys_clk(ulong dummy) return val; } -extern int uli526x_initialize(bd_t *); - int board_eth_init(bd_t *bis) { -#if defined(CONFIG_ULI526) - uli526x_initialize(bis); -#endif - return 0; + return pci_eth_init(bis); } diff --git a/board/mimc/mimc200/mimc200.c b/board/mimc/mimc200/mimc200.c index 4ece11a..8516dcb 100644 --- a/board/mimc/mimc200/mimc200.c +++ b/board/mimc/mimc200/mimc200.c @@ -20,6 +20,7 @@ * MA 02111-1307 USA */ #include +#include #include #include @@ -195,8 +196,6 @@ void spi_cs_deactivate(struct spi_slave *slave) #endif /* CONFIG_ATMEL_SPI */ #ifdef CONFIG_CMD_NET -extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); - int board_eth_init(bd_t *bi) { macb_eth_initialize(0, (void *)MACB0_BASE, bi->bi_phy_id[0]); diff --git a/board/miromico/hammerhead/hammerhead.c b/board/miromico/hammerhead/hammerhead.c index 738ece2..d3875f4 100644 --- a/board/miromico/hammerhead/hammerhead.c +++ b/board/miromico/hammerhead/hammerhead.c @@ -25,6 +25,7 @@ #include "../cpu/at32ap/at32ap700x/sm.h" #include +#include #include #include @@ -51,8 +52,6 @@ static const struct sdram_config sdram_config = { .refresh_period = (781 * (SDRAMC_BUS_HZ / 1000)) / 100000, }; -extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); - #ifdef CONFIG_CMD_NET int board_eth_init(bd_t *bis) { diff --git a/board/sl8245/sl8245.c b/board/sl8245/sl8245.c index c853755..e66272e 100644 --- a/board/sl8245/sl8245.c +++ b/board/sl8245/sl8245.c @@ -24,6 +24,7 @@ #include #include #include +#include int checkboard (void) { @@ -67,8 +68,6 @@ void pci_init_board(void) pci_mpc824x_init(&hose); } -extern int skge_initialize(bd_t *bis); - int board_eth_init(bd_t *bis) { int rc = 0; diff --git a/cpu/leon2/cpu.c b/cpu/leon2/cpu.c index 5de1c52..d6e23b1 100644 --- a/cpu/leon2/cpu.c +++ b/cpu/leon2/cpu.c @@ -25,6 +25,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -57,8 +58,6 @@ int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) /* ------------------------------------------------------------------------- */ -extern int greth_initialize(bd_t *bis); - #ifdef CONFIG_GRETH int cpu_eth_init(bd_t *bis) { diff --git a/cpu/leon3/cpu.c b/cpu/leon3/cpu.c index 1725fdb..976f311 100644 --- a/cpu/leon3/cpu.c +++ b/cpu/leon3/cpu.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -65,7 +66,6 @@ u64 flash_read64(void *addr) } /* ------------------------------------------------------------------------- */ -extern int greth_initialize(bd_t *bis); #ifdef CONFIG_GRETH int cpu_eth_init(bd_t *bis) diff --git a/cpu/mcf523x/cpu.c b/cpu/mcf523x/cpu.c index 8d2152d..bdc152f 100644 --- a/cpu/mcf523x/cpu.c +++ b/cpu/mcf523x/cpu.c @@ -28,6 +28,7 @@ #include #include #include +#include #include @@ -114,8 +115,6 @@ int watchdog_init(void) * int board_eth_init(bd_t *bis) */ -extern int mcffec_initialize(bd_t*); - int cpu_eth_init(bd_t *bis) { return mcffec_initialize(bis); diff --git a/cpu/mcf52x2/cpu.c b/cpu/mcf52x2/cpu.c index 2af31cb..167097a 100644 --- a/cpu/mcf52x2/cpu.c +++ b/cpu/mcf52x2/cpu.c @@ -32,6 +32,7 @@ #include #include #include +#include #ifdef CONFIG_M5271 /* @@ -328,8 +329,6 @@ int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[]) * int board_eth_init(bd_t *bis) */ -extern int mcffec_initialize(bd_t*); - int cpu_eth_init(bd_t *bis) { return mcffec_initialize(bis); diff --git a/cpu/mcf532x/cpu.c b/cpu/mcf532x/cpu.c index 20d0d5c..260d6e6 100644 --- a/cpu/mcf532x/cpu.c +++ b/cpu/mcf532x/cpu.c @@ -28,6 +28,7 @@ #include #include #include +#include #include @@ -136,8 +137,6 @@ int watchdog_init(void) * int board_eth_init(bd_t *bis) */ -extern int mcffec_initialize(bd_t*); - int cpu_eth_init(bd_t *bis) { return mcffec_initialize(bis); diff --git a/cpu/mcf5445x/cpu.c b/cpu/mcf5445x/cpu.c index ab342dd..a30c327 100644 --- a/cpu/mcf5445x/cpu.c +++ b/cpu/mcf5445x/cpu.c @@ -28,6 +28,7 @@ #include #include #include +#include #include @@ -102,8 +103,6 @@ int checkcpu(void) * int board_eth_init(bd_t *bis) */ -extern int mcffec_initialize(bd_t*); - int cpu_eth_init(bd_t *bis) { return mcffec_initialize(bis); diff --git a/cpu/mcf547x_8x/cpu.c b/cpu/mcf547x_8x/cpu.c index 1ba7aa8..ab4ad28 100644 --- a/cpu/mcf547x_8x/cpu.c +++ b/cpu/mcf547x_8x/cpu.c @@ -28,6 +28,7 @@ #include #include #include +#include #include @@ -148,9 +149,6 @@ int watchdog_init(void) * int board_eth_init(bd_t *bis) */ -extern int mcdmafec_initialize(bd_t *bis); -extern int mcffec_initialize(bd_t*); - int cpu_eth_init(bd_t *bis) { #if defined(CONFIG_FSLDMAFEC) diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index 3ee5d96..c5e74b8 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include diff --git a/drivers/net/greth.c b/drivers/net/greth.c index 90c5338..79bc4d9 100644 --- a/drivers/net/greth.c +++ b/drivers/net/greth.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/net/macb.c b/drivers/net/macb.c index aa39284..08bebf7 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -40,6 +40,7 @@ */ #include +#include #include #include diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c index 50d6508..f93cf59 100644 --- a/drivers/net/mcffec.c +++ b/drivers/net/mcffec.c @@ -32,6 +32,7 @@ #include #include +#include #include #undef ET_DEBUG diff --git a/drivers/net/sk98lin/uboot_drv.c b/drivers/net/sk98lin/uboot_drv.c index 205e7d2..0199b33 100644 --- a/drivers/net/sk98lin/uboot_drv.c +++ b/drivers/net/sk98lin/uboot_drv.c @@ -24,6 +24,7 @@ */ #include +#include #include "h/skdrv1st.h" #include "h/skdrv2nd.h" diff --git a/drivers/net/uli526x.c b/drivers/net/uli526x.c index d87638c..9ea5ac2 100644 --- a/drivers/net/uli526x.c +++ b/drivers/net/uli526x.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include diff --git a/include/netdev.h b/include/netdev.h new file mode 100644 index 0000000..3ec9212 --- /dev/null +++ b/include/netdev.h @@ -0,0 +1,66 @@ +/* + * (C) Copyright 2008 + * Benjamin Warren, biggerbadderben@gmail.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * netdev.h - definitions an prototypes for network devices + */ + +#ifndef _NETDEV_H_ +#define _NETDEV_H_ + +/* + * Board and CPU-specific initialization functions + * board_eth_init() has highest priority. cpu_eth_init() only + * gets called if board_eth_init() isn't instantiated or fails. + * Return values: + * 0: success + * -1: failure + */ + +int board_eth_init(bd_t *bis); +int cpu_eth_init(bd_t *bis); + +/* Driver initialization prototypes */ +int bfin_EMAC_initialize(bd_t *bis); +int greth_initialize(bd_t *bis); +int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); +int mcdmafec_initialize(bd_t *bis); +int mcffec_initialize(bd_t *bis); +int skge_initialize(bd_t *bis); +int uli526x_initialize(bd_t *bis); + +/* Boards with PCI network controllers can call this from their board_eth_init() + * function to initialize whatever's on board. + * Return value is total # of devices found */ + +static inline int pci_eth_init(bd_t *bis) +{ + int num = 0; +#if defined(CONFIG_ULI526) + num += uli526x_initialize(bis); +#endif + return num; +} + +#endif /* _NETDEV_H_ */ + -- cgit v0.10.2 From 3ae071e44256144d6c1e3febb65f6c56bd433769 Mon Sep 17 00:00:00 2001 From: Ben Warren Date: Tue, 12 Aug 2008 22:11:53 -0700 Subject: Moved initialization of Ethernet controllers on Atmel AT91 to board_eth_init() Removed at91sam9_eth_initialize() from net/eth.c Signed-off-by: Ben Warren diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c index c5082a0..787d64d 100644 --- a/board/atmel/at91cap9adk/at91cap9adk.c +++ b/board/atmel/at91cap9adk/at91cap9adk.c @@ -30,11 +30,13 @@ #include #include #include +#include #include #include #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) #include #endif +#include #define MP_BLOCK_3_BASE 0xFDF00000 @@ -376,3 +378,12 @@ void reset_phy(void) #endif } #endif + +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_MACB + rc = macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00); +#endif + return rc; +} diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c index 06d8512..913e3fb 100644 --- a/board/atmel/at91sam9260ek/at91sam9260ek.c +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c @@ -30,9 +30,11 @@ #include #include #include +#include #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) #include #endif +#include DECLARE_GLOBAL_DATA_PTR; @@ -248,3 +250,12 @@ void reset_phy(void) #endif } #endif + +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_MACB + rc = macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00); +#endif + return rc; +} diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c index 927fc91..c705074 100644 --- a/board/atmel/at91sam9263ek/at91sam9263ek.c +++ b/board/atmel/at91sam9263ek/at91sam9263ek.c @@ -31,11 +31,13 @@ #include #include #include +#include #include #include #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) #include #endif +#include DECLARE_GLOBAL_DATA_PTR; @@ -308,3 +310,12 @@ void reset_phy(void) #endif } #endif + +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_MACB + rc = macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00); +#endif + return rc; +} diff --git a/cpu/arm926ejs/at91/Makefile b/cpu/arm926ejs/at91/Makefile index 44cde1a..2d2a888 100644 --- a/cpu/arm926ejs/at91/Makefile +++ b/cpu/arm926ejs/at91/Makefile @@ -25,7 +25,6 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).a -COBJS-y += ether.o COBJS-y += timer.o COBJS-$(CONFIG_HAS_DATAFLASH) +=spi.o COBJS-y += usb.o diff --git a/cpu/arm926ejs/at91/ether.c b/cpu/arm926ejs/at91/ether.c deleted file mode 100644 index 7e11fe4..0000000 --- a/cpu/arm926ejs/at91/ether.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop - * Lead Tech Design - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include - -extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); - -#if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET) -void at91sam9_eth_initialize(bd_t *bi) -{ - macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00); -} -#endif diff --git a/net/eth.c b/net/eth.c index 85fa0da..71feb07 100644 --- a/net/eth.c +++ b/net/eth.c @@ -66,7 +66,6 @@ extern int scc_initialize(bd_t*); extern int tsi108_eth_initialize(bd_t*); extern int npe_initialize(bd_t *); extern int uec_initialize(int); -extern int at91sam9_eth_initialize(bd_t *); #ifdef CONFIG_API extern void (*push_packet)(volatile void *, int); @@ -254,10 +253,6 @@ int eth_initialize(bd_t *bis) #if defined(CONFIG_RTL8169) rtl8169_initialize(bis); #endif -#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ - defined(CONFIG_AT91SAM9263) - at91sam9_eth_initialize(bis); -#endif if (!eth_devices) { puts ("No ethernet found.\n"); -- cgit v0.10.2 From 02d69891d95ee76b0e86e1715a4dc0b964a57cb7 Mon Sep 17 00:00:00 2001 From: Ben Warren Date: Sun, 31 Aug 2008 09:49:42 -0700 Subject: Moved initialization of RTL8169 Ethernet controller to board_eth_init() Affected boards: linkstation r7780mp Removed initialization of the driver from net/eth.c Signed-off-by: Ben Warren diff --git a/board/linkstation/linkstation.c b/board/linkstation/linkstation.c index 241cf03..afb96ae 100644 --- a/board/linkstation/linkstation.c +++ b/board/linkstation/linkstation.c @@ -26,6 +26,7 @@ #include #include #include +#include #ifdef CONFIG_PCI #include @@ -128,3 +129,8 @@ int board_early_init_f (void) out_8((volatile u8*)UART_DCR, 1); return 0; } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/r7780mp/r7780mp.c b/board/r7780mp/r7780mp.c index 19c35d3..efbeec9 100644 --- a/board/r7780mp/r7780mp.c +++ b/board/r7780mp/r7780mp.c @@ -23,6 +23,7 @@ #include #include #include +#include #include "r7780mp.h" int checkboard(void) @@ -77,3 +78,8 @@ void pci_init_board(void) { pci_sh7780_init(&hose); } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c index 7c00926..e9f6391 100644 --- a/drivers/net/rtl8169.c +++ b/drivers/net/rtl8169.c @@ -55,6 +55,7 @@ #include #include #include +#include #include #include diff --git a/include/netdev.h b/include/netdev.h index 3ec9212..954de39 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -46,6 +46,7 @@ int greth_initialize(bd_t *bis); int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); int mcdmafec_initialize(bd_t *bis); int mcffec_initialize(bd_t *bis); +int rtl8169_initialize(bd_t *bis); int skge_initialize(bd_t *bis); int uli526x_initialize(bd_t *bis); @@ -56,6 +57,9 @@ int uli526x_initialize(bd_t *bis); static inline int pci_eth_init(bd_t *bis) { int num = 0; +#if defined(CONFIG_RTL8169) + num += rtl8169_initialize(bis); +#endif #if defined(CONFIG_ULI526) num += uli526x_initialize(bis); #endif diff --git a/net/eth.c b/net/eth.c index 71feb07..69f66b4 100644 --- a/net/eth.c +++ b/net/eth.c @@ -61,7 +61,6 @@ extern int pcnet_initialize(bd_t*); extern int plb2800_eth_initialize(bd_t*); extern int ppc_4xx_eth_initialize(bd_t *); extern int rtl8139_initialize(bd_t*); -extern int rtl8169_initialize(bd_t*); extern int scc_initialize(bd_t*); extern int tsi108_eth_initialize(bd_t*); extern int npe_initialize(bd_t *); @@ -250,10 +249,6 @@ int eth_initialize(bd_t *bis) #if defined(CONFIG_RTL8139) rtl8139_initialize(bis); #endif -#if defined(CONFIG_RTL8169) - rtl8169_initialize(bis); -#endif - if (!eth_devices) { puts ("No ethernet found.\n"); show_boot_progress (-64); -- cgit v0.10.2 From 0b252f50ae218ae15bfb63af44227972686ebc56 Mon Sep 17 00:00:00 2001 From: Ben Warren Date: Sun, 31 Aug 2008 21:41:08 -0700 Subject: Moved initialization of RTL8139 Ethernet controller to board_eth_init() Affected boards: hidden_dragon MPC8544DS MPC8610HPCN R2DPLUS TB0229 Removed initialization of the driver from net/eth.c Signed-off-by: Ben Warren diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index 1e29773..eaf6fa3 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -33,6 +33,7 @@ #include #include #include +#include #include "../common/pixis.h" #include "../common/sgmii_riser.h" @@ -465,9 +466,9 @@ get_board_sys_clk(ulong dummy) return val; } -#ifdef CONFIG_TSEC_ENET int board_eth_init(bd_t *bis) { +#ifdef CONFIG_TSEC_ENET struct tsec_info_struct tsec_info[2]; volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; @@ -497,10 +498,9 @@ int board_eth_init(bd_t *bis) tsec_eth_init(bis, tsec_info, num); - - return 0; -} #endif + return pci_eth_init(bis); +} #if defined(CONFIG_OF_BOARD_SETUP) diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c index 1bb563e..97f7f49 100644 --- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c +++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c @@ -29,6 +29,7 @@ #include #include #include +#include #include "../common/pixis.h" @@ -379,3 +380,10 @@ get_board_sys_clk(ulong dummy) return val; } + +int board_eth_init(bd_t *bis) +{ + /* Initialize TSECs */ + cpu_eth_init(bis); + return pci_eth_init(bis); +} diff --git a/board/hidden_dragon/hidden_dragon.c b/board/hidden_dragon/hidden_dragon.c index 5713a33..2d7a787 100644 --- a/board/hidden_dragon/hidden_dragon.c +++ b/board/hidden_dragon/hidden_dragon.c @@ -27,6 +27,7 @@ #include #include #include +#include int checkboard (void) { @@ -93,3 +94,8 @@ void pci_init_board(void) { pci_mpc824x_init(&hose); } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/r2dplus/r2dplus.c b/board/r2dplus/r2dplus.c index 8fb8ff6..b962dd1 100644 --- a/board/r2dplus/r2dplus.c +++ b/board/r2dplus/r2dplus.c @@ -76,3 +76,8 @@ void pci_init_board(void) { pci_sh7751_init(&hose); } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/tb0229/tb0229.c b/board/tb0229/tb0229.c index 921bd3a..2abb4a7 100644 --- a/board/tb0229/tb0229.c +++ b/board/tb0229/tb0229.c @@ -46,3 +46,8 @@ int checkboard (void) return 0; } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/drivers/net/rtl8139.c b/drivers/net/rtl8139.c index 4fd20ac..d378ce3 100644 --- a/drivers/net/rtl8139.c +++ b/drivers/net/rtl8139.c @@ -74,6 +74,7 @@ #include #include #include +#include #include #include diff --git a/include/netdev.h b/include/netdev.h index 954de39..b333755 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -46,6 +46,7 @@ int greth_initialize(bd_t *bis); int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); int mcdmafec_initialize(bd_t *bis); int mcffec_initialize(bd_t *bis); +int rtl8139_initialize(bd_t *bis); int rtl8169_initialize(bd_t *bis); int skge_initialize(bd_t *bis); int uli526x_initialize(bd_t *bis); @@ -57,6 +58,9 @@ int uli526x_initialize(bd_t *bis); static inline int pci_eth_init(bd_t *bis) { int num = 0; +#if defined(CONFIG_RTL8139) + num += rtl8139_initialize(bis); +#endif #if defined(CONFIG_RTL8169) num += rtl8169_initialize(bis); #endif diff --git a/net/eth.c b/net/eth.c index 69f66b4..092d426 100644 --- a/net/eth.c +++ b/net/eth.c @@ -60,7 +60,6 @@ extern int ns8382x_initialize(bd_t*); extern int pcnet_initialize(bd_t*); extern int plb2800_eth_initialize(bd_t*); extern int ppc_4xx_eth_initialize(bd_t *); -extern int rtl8139_initialize(bd_t*); extern int scc_initialize(bd_t*); extern int tsi108_eth_initialize(bd_t*); extern int npe_initialize(bd_t *); @@ -246,9 +245,6 @@ int eth_initialize(bd_t *bis) #if defined(CONFIG_TSI108_ETH) tsi108_eth_initialize(bis); #endif -#if defined(CONFIG_RTL8139) - rtl8139_initialize(bis); -#endif if (!eth_devices) { puts ("No ethernet found.\n"); show_boot_progress (-64); -- cgit v0.10.2 From ccdd12f83ef93719fbe85f642aa4dc648b9498f0 Mon Sep 17 00:00:00 2001 From: Ben Warren Date: Sun, 31 Aug 2008 09:59:33 -0700 Subject: Moved initialization of TSI108 Ethernet controller to board_eth_init() Affected boards: mpc7448hpc2 Removed initialization of the driver from net/eth.c Signed-off-by: Ben Warren diff --git a/board/freescale/mpc7448hpc2/mpc7448hpc2.c b/board/freescale/mpc7448hpc2/mpc7448hpc2.c index 6f74c31..cfdbed5 100644 --- a/board/freescale/mpc7448hpc2/mpc7448hpc2.c +++ b/board/freescale/mpc7448hpc2/mpc7448hpc2.c @@ -32,6 +32,7 @@ #include #include <74xx_7xx.h> #include +#include #undef DEBUG @@ -92,3 +93,12 @@ ft_board_setup(void *blob, bd_t *bd) fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); } #endif + +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#if defined(CONFIG_TSI108_ETH) + rc = tsi108_eth_initialize(bis); +#endif + return rc; +} diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c index 2534097..50fa765 100644 --- a/drivers/net/tsi108_eth.c +++ b/drivers/net/tsi108_eth.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #ifdef DEBUG diff --git a/include/netdev.h b/include/netdev.h index b333755..5f6b38f 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -49,6 +49,7 @@ int mcffec_initialize(bd_t *bis); int rtl8139_initialize(bd_t *bis); int rtl8169_initialize(bd_t *bis); int skge_initialize(bd_t *bis); +int tsi108_eth_initialize(bd_t *bis); int uli526x_initialize(bd_t *bis); /* Boards with PCI network controllers can call this from their board_eth_init() diff --git a/net/eth.c b/net/eth.c index 092d426..65ebf2d 100644 --- a/net/eth.c +++ b/net/eth.c @@ -61,7 +61,6 @@ extern int pcnet_initialize(bd_t*); extern int plb2800_eth_initialize(bd_t*); extern int ppc_4xx_eth_initialize(bd_t *); extern int scc_initialize(bd_t*); -extern int tsi108_eth_initialize(bd_t*); extern int npe_initialize(bd_t *); extern int uec_initialize(int); @@ -242,9 +241,6 @@ int eth_initialize(bd_t *bis) #ifdef CONFIG_NS8382X ns8382x_initialize(bis); #endif -#if defined(CONFIG_TSI108_ETH) - tsi108_eth_initialize(bis); -#endif if (!eth_devices) { puts ("No ethernet found.\n"); show_boot_progress (-64); -- cgit v0.10.2 From 19403633dd70333893c2da7926a1d0dcd6dab7d8 Mon Sep 17 00:00:00 2001 From: Ben Warren Date: Sun, 31 Aug 2008 10:03:22 -0700 Subject: Moved initialization of NS8382X Ethernet controller to board_eth_init() Affected boards: bc3450 cpci5200 mecp5200 pf2000 icecube o2dnt pm520 sandpoint8245 total5200 tqm5200 Removed initialization of the driver from net/eth.c Signed-off-by: Ben Warren diff --git a/board/bc3450/bc3450.c b/board/bc3450/bc3450.c index a728dc6..e27c234 100644 --- a/board/bc3450/bc3450.c +++ b/board/bc3450/bc3450.c @@ -33,6 +33,7 @@ #include #include #include +#include #ifdef CONFIG_VIDEO_SM501 #include @@ -669,3 +670,8 @@ int board_get_height (void) } #endif /* CONFIG_VIDEO_SM501 */ + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/esd/cpci5200/cpci5200.c b/board/esd/cpci5200/cpci5200.c index 20130ac..2a42e65 100644 --- a/board/esd/cpci5200/cpci5200.c +++ b/board/esd/cpci5200/cpci5200.c @@ -32,6 +32,7 @@ #include #include #include +#include #include "mt46v16m16-75.h" @@ -259,6 +260,11 @@ void init_ata_reset(void) } } +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} + int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { unsigned int addr; diff --git a/board/esd/mecp5200/mecp5200.c b/board/esd/mecp5200/mecp5200.c index 6d776b7..ff44abd 100644 --- a/board/esd/mecp5200/mecp5200.c +++ b/board/esd/mecp5200/mecp5200.c @@ -32,6 +32,7 @@ #include #include #include +#include #include "mt46v16m16-75.h" @@ -259,3 +260,8 @@ void init_power_switch(void) __asm__ volatile ("sync"); } } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/esd/pf5200/pf5200.c b/board/esd/pf5200/pf5200.c index 7970f89..c4c0221 100644 --- a/board/esd/pf5200/pf5200.c +++ b/board/esd/pf5200/pf5200.c @@ -32,6 +32,7 @@ #include #include #include +#include #include "mt46v16m16-75.h" @@ -264,6 +265,11 @@ void init_power_switch(void) __asm__ volatile ("sync"); } +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} + void power_set_reset(int power) { debug("ide_set_reset(%d)\n", power); diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c index 760db73..2ab86be 100644 --- a/board/icecube/icecube.c +++ b/board/icecube/icecube.c @@ -29,6 +29,7 @@ #include #include #include +#include #if defined(CONFIG_LITE5200B) #include "mt46v32m16.h" @@ -390,3 +391,8 @@ ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); } #endif + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/o2dnt/o2dnt.c b/board/o2dnt/o2dnt.c index a4eed3a..37832de 100644 --- a/board/o2dnt/o2dnt.c +++ b/board/o2dnt/o2dnt.c @@ -27,6 +27,7 @@ #include #include #include +#include #define SDRAM_MODE 0x00CD0000 #define SDRAM_CONTROL 0x504F0000 @@ -180,3 +181,8 @@ void pci_init_board(void) pci_mpc5xxx_init(&hose); } #endif + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/pm520/pm520.c b/board/pm520/pm520.c index 83d9bcd..c9610fb 100644 --- a/board/pm520/pm520.c +++ b/board/pm520/pm520.c @@ -27,6 +27,7 @@ #include #include #include +#include #if defined(CONFIG_MPC5200_DDR) #include "mt46v16m16-75.h" @@ -321,3 +322,8 @@ void doc_init (void) doc_probe (CFG_DOC_BASE); } #endif + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/sandpoint/sandpoint.c b/board/sandpoint/sandpoint.c index 7429647..832baa2 100644 --- a/board/sandpoint/sandpoint.c +++ b/board/sandpoint/sandpoint.c @@ -24,6 +24,7 @@ #include #include #include +#include int checkboard (void) { @@ -99,3 +100,8 @@ void pci_init_board(void) { pci_mpc824x_init(&hose); } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/total5200/total5200.c b/board/total5200/total5200.c index 1ae24c4..c1848fc 100644 --- a/board/total5200/total5200.c +++ b/board/total5200/total5200.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "sdram.h" @@ -308,3 +309,8 @@ int board_get_height (void) } #endif /* CONFIG_VIDEO_SED13806 */ + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/tqc/tqm5200/tqm5200.c b/board/tqc/tqm5200/tqm5200.c index 8b8e461..d75aa9b 100644 --- a/board/tqc/tqm5200/tqm5200.c +++ b/board/tqc/tqm5200/tqm5200.c @@ -32,6 +32,7 @@ #include #include #include +#include #ifdef CONFIG_VIDEO_SM501 #include @@ -749,3 +750,8 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/drivers/net/ns8382x.c b/drivers/net/ns8382x.c index bb58438..a2d61af 100644 --- a/drivers/net/ns8382x.c +++ b/drivers/net/ns8382x.c @@ -53,6 +53,7 @@ #include #include #include +#include #include #include diff --git a/include/netdev.h b/include/netdev.h index 5f6b38f..97eff7a 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -46,6 +46,7 @@ int greth_initialize(bd_t *bis); int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); int mcdmafec_initialize(bd_t *bis); int mcffec_initialize(bd_t *bis); +int ns8382x_initialize(bd_t *bis); int rtl8139_initialize(bd_t *bis); int rtl8169_initialize(bd_t *bis); int skge_initialize(bd_t *bis); @@ -59,6 +60,9 @@ int uli526x_initialize(bd_t *bis); static inline int pci_eth_init(bd_t *bis) { int num = 0; +#ifdef CONFIG_NS8382X + num += ns8382x_initialize(bis); +#endif #if defined(CONFIG_RTL8139) num += rtl8139_initialize(bis); #endif diff --git a/net/eth.c b/net/eth.c index 65ebf2d..b846cad 100644 --- a/net/eth.c +++ b/net/eth.c @@ -56,7 +56,6 @@ extern int mpc8220_fec_initialize(bd_t*); extern int mv6436x_eth_initialize(bd_t *); extern int mv6446x_eth_initialize(bd_t *); extern int natsemi_initialize(bd_t*); -extern int ns8382x_initialize(bd_t*); extern int pcnet_initialize(bd_t*); extern int plb2800_eth_initialize(bd_t*); extern int ppc_4xx_eth_initialize(bd_t *); @@ -238,9 +237,6 @@ int eth_initialize(bd_t *bis) #ifdef CONFIG_NATSEMI natsemi_initialize(bis); #endif -#ifdef CONFIG_NS8382X - ns8382x_initialize(bis); -#endif if (!eth_devices) { puts ("No ethernet found.\n"); show_boot_progress (-64); -- cgit v0.10.2 From b902b8dda5e1fd4d5fe2f202c71ee3521d2c40ed Mon Sep 17 00:00:00 2001 From: Ben Warren Date: Sun, 31 Aug 2008 10:07:16 -0700 Subject: Moved initialization of NATSEMI Ethernet controller to board_eth_init() Affected boards: a3000 Removed initialization of the driver from net/eth.c Signed-off-by: Ben Warren diff --git a/board/a3000/a3000.c b/board/a3000/a3000.c index c1eceaa..040ba89 100644 --- a/board/a3000/a3000.c +++ b/board/a3000/a3000.c @@ -27,6 +27,7 @@ #include #include #include +#include int checkboard (void) { @@ -109,3 +110,9 @@ void pci_init_board(void) { pci_mpc824x_init(&hose); } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} + diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index 4aee048..ff8d2d7 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -53,6 +53,7 @@ #include #include #include +#include #include #include diff --git a/include/netdev.h b/include/netdev.h index 97eff7a..c5b0815 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -46,6 +46,7 @@ int greth_initialize(bd_t *bis); int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); int mcdmafec_initialize(bd_t *bis); int mcffec_initialize(bd_t *bis); +int natsemi_initialize(bd_t *bis); int ns8382x_initialize(bd_t *bis); int rtl8139_initialize(bd_t *bis); int rtl8169_initialize(bd_t *bis); @@ -60,6 +61,9 @@ int uli526x_initialize(bd_t *bis); static inline int pci_eth_init(bd_t *bis) { int num = 0; +#ifdef CONFIG_NATSEMI + num += natsemi_initialize(bis); +#endif #ifdef CONFIG_NS8382X num += ns8382x_initialize(bis); #endif diff --git a/net/eth.c b/net/eth.c index b846cad..dc7b288 100644 --- a/net/eth.c +++ b/net/eth.c @@ -55,7 +55,6 @@ extern int mpc512x_fec_initialize(bd_t*); extern int mpc8220_fec_initialize(bd_t*); extern int mv6436x_eth_initialize(bd_t *); extern int mv6446x_eth_initialize(bd_t *); -extern int natsemi_initialize(bd_t*); extern int pcnet_initialize(bd_t*); extern int plb2800_eth_initialize(bd_t*); extern int ppc_4xx_eth_initialize(bd_t *); @@ -234,9 +233,6 @@ int eth_initialize(bd_t *bis) #ifdef CFG_GT_6426x gt6426x_eth_initialize(bis); #endif -#ifdef CONFIG_NATSEMI - natsemi_initialize(bis); -#endif if (!eth_devices) { puts ("No ethernet found.\n"); show_boot_progress (-64); -- cgit v0.10.2 From e3090534d62045dcb73f5392bacc64a4e8e443dc Mon Sep 17 00:00:00 2001 From: Ben Warren Date: Sun, 31 Aug 2008 10:08:43 -0700 Subject: Moved initialization of PCNET Ethernet controller to board_eth_init() Affected boards: PN62 sc520_cdp Removed initialization of the driver from net/eth.c Signed-off-by: Ben Warren diff --git a/board/pn62/pn62.c b/board/pn62/pn62.c index d905b29..60fc431 100644 --- a/board/pn62/pn62.c +++ b/board/pn62/pn62.c @@ -23,6 +23,7 @@ #include #include #include +#include #include "pn62.h" @@ -186,3 +187,8 @@ static int get_mac_address (int id, u8 * mac, char *string, int size) mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/sc520_cdp/sc520_cdp.c b/board/sc520_cdp/sc520_cdp.c index 8050aa6..f21c730 100644 --- a/board/sc520_cdp/sc520_cdp.c +++ b/board/sc520_cdp/sc520_cdp.c @@ -29,6 +29,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -629,3 +630,8 @@ ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len) #endif return res; } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/drivers/net/pcnet.c b/drivers/net/pcnet.c index a4f0214..99b6942 100644 --- a/drivers/net/pcnet.c +++ b/drivers/net/pcnet.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include diff --git a/include/netdev.h b/include/netdev.h index c5b0815..b1dadd8 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -48,6 +48,7 @@ int mcdmafec_initialize(bd_t *bis); int mcffec_initialize(bd_t *bis); int natsemi_initialize(bd_t *bis); int ns8382x_initialize(bd_t *bis); +int pcnet_initialize(bd_t *bis); int rtl8139_initialize(bd_t *bis); int rtl8169_initialize(bd_t *bis); int skge_initialize(bd_t *bis); @@ -61,6 +62,10 @@ int uli526x_initialize(bd_t *bis); static inline int pci_eth_init(bd_t *bis) { int num = 0; + +#ifdef CONFIG_PCNET + num += pcnet_initialize(bis); +#endif #ifdef CONFIG_NATSEMI num += natsemi_initialize(bis); #endif diff --git a/net/eth.c b/net/eth.c index dc7b288..aa6b2c8 100644 --- a/net/eth.c +++ b/net/eth.c @@ -55,7 +55,6 @@ extern int mpc512x_fec_initialize(bd_t*); extern int mpc8220_fec_initialize(bd_t*); extern int mv6436x_eth_initialize(bd_t *); extern int mv6446x_eth_initialize(bd_t *); -extern int pcnet_initialize(bd_t*); extern int plb2800_eth_initialize(bd_t*); extern int ppc_4xx_eth_initialize(bd_t *); extern int scc_initialize(bd_t*); @@ -227,9 +226,6 @@ int eth_initialize(bd_t *bis) #ifdef CONFIG_3COM eth_3com_initialize(bis); #endif -#ifdef CONFIG_PCNET - pcnet_initialize(bis); -#endif #ifdef CFG_GT_6426x gt6426x_eth_initialize(bis); #endif -- cgit v0.10.2 From 6aca145e067efe75398e9fac97822bd3700de0b2 Mon Sep 17 00:00:00 2001 From: Ben Warren Date: Sun, 31 Aug 2008 10:13:34 -0700 Subject: Moved initialization of GT6426x Ethernet controller to board_eth_init() Affected boards: EVB64260 P3G4 ZUMA Removed initialization of the driver from net/eth.c Signed-off-by: Ben Warren diff --git a/board/evb64260/eth.c b/board/evb64260/eth.c index fa5b6d4..ca8bab5 100644 --- a/board/evb64260/eth.c +++ b/board/evb64260/eth.c @@ -27,6 +27,7 @@ Skeleton NIC driver for Etherboot #include #include #include +#include #include "eth.h" #include "eth_addrtbl.h" diff --git a/board/evb64260/evb64260.c b/board/evb64260/evb64260.c index ab59941..bc108d0 100644 --- a/board/evb64260/evb64260.c +++ b/board/evb64260/evb64260.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include "eth.h" @@ -248,7 +249,6 @@ int board_early_init_f (void) sram_boot = 1; #endif - if (!sram_boot) memoryMapDeviceSpace(DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE); memoryMapDeviceSpace(DEVICE1, CFG_DEV1_SPACE, CFG_DEV1_SIZE); @@ -443,3 +443,9 @@ display_mem_map(void) printf(" BOOT: base - 0x%08x\tsize - %dM bytes\twidth - %d bits\n", base, size>>20, width); } + +int board_eth_init(bd_t *bis) +{ + gt6426x_eth_initialize(bis); + return 0; +} diff --git a/include/netdev.h b/include/netdev.h index b1dadd8..666d12d 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -43,6 +43,7 @@ int cpu_eth_init(bd_t *bis); /* Driver initialization prototypes */ int bfin_EMAC_initialize(bd_t *bis); int greth_initialize(bd_t *bis); +void gt6426x_eth_initialize(bd_t *bis); int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); int mcdmafec_initialize(bd_t *bis); int mcffec_initialize(bd_t *bis); diff --git a/net/eth.c b/net/eth.c index aa6b2c8..99efa16 100644 --- a/net/eth.c +++ b/net/eth.c @@ -39,10 +39,6 @@ static int __def_eth_init(bd_t *bis) int cpu_eth_init(bd_t *bis) __attribute((weak, alias("__def_eth_init"))); int board_eth_init(bd_t *bis) __attribute((weak, alias("__def_eth_init"))); -#ifdef CFG_GT_6426x -extern int gt6426x_eth_initialize(bd_t *bis); -#endif - extern int au1x00_enet_initialize(bd_t*); extern int dc21x4x_initialize(bd_t*); extern int e1000_initialize(bd_t*); @@ -226,9 +222,6 @@ int eth_initialize(bd_t *bis) #ifdef CONFIG_3COM eth_3com_initialize(bis); #endif -#ifdef CFG_GT_6426x - gt6426x_eth_initialize(bis); -#endif if (!eth_devices) { puts ("No ethernet found.\n"); show_boot_progress (-64); -- cgit v0.10.2 From 164846eeb25cb2a5ede7ab9371fdca7f4831a055 Mon Sep 17 00:00:00 2001 From: Ben Warren Date: Sun, 31 Aug 2008 10:15:26 -0700 Subject: Moved initialization of 3COM Ethernet controller (AmigaOne) to board_eth_init() Affected boards: AmigaOneG3SE Removed initialization of the driver from net/eth.c Signed-off-by: Ben Warren diff --git a/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c b/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c index e118563..4d44001 100644 --- a/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c +++ b/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c @@ -26,6 +26,7 @@ #include #include #include +#include #include "articiaS.h" #include "memio.h" #include "via686.h" @@ -111,3 +112,11 @@ void pci_init_board (void) articiaS_pci_init (); #endif } + +int board_eth_init(bd_t *bis) +{ +#if defined(CONFIG_3COM) + eth_3com_initialize(bis); +#endif + return 0; +} diff --git a/board/MAI/AmigaOneG3SE/enet.c b/board/MAI/AmigaOneG3SE/enet.c index 5a90cc5..0b4dfe6 100644 --- a/board/MAI/AmigaOneG3SE/enet.c +++ b/board/MAI/AmigaOneG3SE/enet.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include diff --git a/include/netdev.h b/include/netdev.h index 666d12d..0c16dd6 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -42,6 +42,7 @@ int cpu_eth_init(bd_t *bis); /* Driver initialization prototypes */ int bfin_EMAC_initialize(bd_t *bis); +int eth_3com_initialize (bd_t * bis); int greth_initialize(bd_t *bis); void gt6426x_eth_initialize(bd_t *bis); int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); diff --git a/net/eth.c b/net/eth.c index 99efa16..c4d7b63 100644 --- a/net/eth.c +++ b/net/eth.c @@ -43,7 +43,6 @@ extern int au1x00_enet_initialize(bd_t*); extern int dc21x4x_initialize(bd_t*); extern int e1000_initialize(bd_t*); extern int eepro100_initialize(bd_t*); -extern int eth_3com_initialize(bd_t*); extern int fec_initialize(bd_t*); extern int inca_switch_initialize(bd_t*); extern int mpc5xxx_fec_initialize(bd_t*); @@ -219,9 +218,6 @@ int eth_initialize(bd_t *bis) #ifdef CONFIG_TULIP dc21x4x_initialize(bis); #endif -#ifdef CONFIG_3COM - eth_3com_initialize(bis); -#endif if (!eth_devices) { puts ("No ethernet found.\n"); show_boot_progress (-64); -- cgit v0.10.2 From 8218bd2aa68820b878a8413493ae17fd8d21f944 Mon Sep 17 00:00:00 2001 From: Ben Warren Date: Sun, 31 Aug 2008 10:16:59 -0700 Subject: Moved initialization of IncaIP Ethernet controller to board_eth_init Affected boards: IncaIP Removed initialization of the driver from net/eth.c Signed-off-by: Ben Warren diff --git a/board/incaip/incaip.c b/board/incaip/incaip.c index ac7ad8f..6fe852c 100644 --- a/board/incaip/incaip.c +++ b/board/incaip/incaip.c @@ -23,6 +23,7 @@ #include #include +#include #include #include #include @@ -116,3 +117,10 @@ int checkboard (void) return 0; } + +#if defined(CONFIG_INCA_IP_SWITCH) +int board_eth_init(bd_t *bis) +{ + return inca_switch_initialize(bis); +} +#endif diff --git a/drivers/net/inca-ip_sw.c b/drivers/net/inca-ip_sw.c index d852a15..492f5ce 100644 --- a/drivers/net/inca-ip_sw.c +++ b/drivers/net/inca-ip_sw.c @@ -28,6 +28,7 @@ #include #include +#include #include #include @@ -199,7 +200,7 @@ int inca_switch_initialize(bd_t * bis) printf("Leaving inca_switch_initialize()\n"); #endif - return 1; + return 0; } diff --git a/include/netdev.h b/include/netdev.h index 0c16dd6..f28039e 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -45,6 +45,7 @@ int bfin_EMAC_initialize(bd_t *bis); int eth_3com_initialize (bd_t * bis); int greth_initialize(bd_t *bis); void gt6426x_eth_initialize(bd_t *bis); +int inca_switch_initialize(bd_t *bis); int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); int mcdmafec_initialize(bd_t *bis); int mcffec_initialize(bd_t *bis); diff --git a/net/eth.c b/net/eth.c index c4d7b63..0dfa70d 100644 --- a/net/eth.c +++ b/net/eth.c @@ -44,7 +44,6 @@ extern int dc21x4x_initialize(bd_t*); extern int e1000_initialize(bd_t*); extern int eepro100_initialize(bd_t*); extern int fec_initialize(bd_t*); -extern int inca_switch_initialize(bd_t*); extern int mpc5xxx_fec_initialize(bd_t*); extern int mpc512x_fec_initialize(bd_t*); extern int mpc8220_fec_initialize(bd_t*); @@ -169,9 +168,6 @@ int eth_initialize(bd_t *bis) #if defined(CONFIG_4xx) && !defined(CONFIG_IOP480) && !defined(CONFIG_AP1000) ppc_4xx_eth_initialize(bis); #endif -#ifdef CONFIG_INCA_IP_SWITCH - inca_switch_initialize(bis); -#endif #ifdef CONFIG_PLB2800_ETHER plb2800_eth_initialize(bis); #endif -- cgit v0.10.2 From a0aad08f9427ac00218bdb2cb649833ce6ec9b8d Mon Sep 17 00:00:00 2001 From: Ben Warren Date: Sun, 31 Aug 2008 10:36:38 -0700 Subject: Moved initialization of MPC512x_FEC Ethernet driver to CPU directory Added a cpu_eth_init() function to MPC512x CPU directory and removed code from net/eth.c Signed-off-by: Ben Warren diff --git a/cpu/mpc512x/cpu.c b/cpu/mpc512x/cpu.c index 1f39ac4..d432d99 100644 --- a/cpu/mpc512x/cpu.c +++ b/cpu/mpc512x/cpu.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #if defined(CONFIG_OF_LIBFDT) @@ -195,3 +196,15 @@ void ft_cpu_setup(void *blob, bd_t *bd) #endif } #endif + +#ifdef CONFIG_MPC512x_FEC +/* Default initializations for FEC controllers. To override, + * create a board-specific function called: + * int board_eth_init(bd_t *bis) + */ + +int cpu_eth_init(bd_t *bis) +{ + return mpc512x_fec_initialize(bis); +} +#endif diff --git a/drivers/net/mpc512x_fec.c b/drivers/net/mpc512x_fec.c index 7caeeda..54283fb 100644 --- a/drivers/net/mpc512x_fec.c +++ b/drivers/net/mpc512x_fec.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include "mpc512x_fec.h" diff --git a/include/netdev.h b/include/netdev.h index f28039e..487d319 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -49,6 +49,7 @@ int inca_switch_initialize(bd_t *bis); int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); int mcdmafec_initialize(bd_t *bis); int mcffec_initialize(bd_t *bis); +int mpc512x_fec_initialize(bd_t *bis); int natsemi_initialize(bd_t *bis); int ns8382x_initialize(bd_t *bis); int pcnet_initialize(bd_t *bis); diff --git a/net/eth.c b/net/eth.c index 0dfa70d..b61d0fc 100644 --- a/net/eth.c +++ b/net/eth.c @@ -45,7 +45,6 @@ extern int e1000_initialize(bd_t*); extern int eepro100_initialize(bd_t*); extern int fec_initialize(bd_t*); extern int mpc5xxx_fec_initialize(bd_t*); -extern int mpc512x_fec_initialize(bd_t*); extern int mpc8220_fec_initialize(bd_t*); extern int mv6436x_eth_initialize(bd_t *); extern int mv6446x_eth_initialize(bd_t *); @@ -177,9 +176,6 @@ int eth_initialize(bd_t *bis) #if defined(CONFIG_MPC5xxx_FEC) mpc5xxx_fec_initialize(bis); #endif -#if defined(CONFIG_MPC512x_FEC) - mpc512x_fec_initialize (bis); -#endif #if defined(CONFIG_MPC8220_FEC) mpc8220_fec_initialize(bis); #endif -- cgit v0.10.2 From e1d7480b5de1fd4830bf7cf5e2237d3b0846d08d Mon Sep 17 00:00:00 2001 From: Ben Warren Date: Sun, 31 Aug 2008 10:39:12 -0700 Subject: Moved initialization of MPC5xxx_FEC Ethernet driver to CPU directory Modified board_eth_init() functions of boards that have this FEC in addition to other Ethernet controllers. Affected boards: bc3450 icecube mvbc_p o2dnt pm520 total5200 tq5200 Removed initialization of controller from net/eth.c Signed-off-by: Ben Warren diff --git a/board/bc3450/bc3450.c b/board/bc3450/bc3450.c index e27c234..7ddf74c 100644 --- a/board/bc3450/bc3450.c +++ b/board/bc3450/bc3450.c @@ -673,5 +673,6 @@ int board_get_height (void) int board_eth_init(bd_t *bis) { + cpu_eth_init(bis); /* Built in FEC comes first */ return pci_eth_init(bis); } diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c index 2ab86be..d84ab3a 100644 --- a/board/icecube/icecube.c +++ b/board/icecube/icecube.c @@ -394,5 +394,6 @@ ft_board_setup(void *blob, bd_t *bd) int board_eth_init(bd_t *bis) { + cpu_eth_init(bis); /* Built in FEC comes first */ return pci_eth_init(bis); } diff --git a/board/matrix_vision/mvbc_p/mvbc_p.c b/board/matrix_vision/mvbc_p/mvbc_p.c index 3332f5a..648b45e 100644 --- a/board/matrix_vision/mvbc_p/mvbc_p.c +++ b/board/matrix_vision/mvbc_p/mvbc_p.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include "fpga.h" #include "mvbc_p.h" @@ -324,3 +325,8 @@ void ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); } + +int board_eth_init(bd_t *bis) +{ + return cpu_eth_init(bis); /* Built in FEC comes first */ +} diff --git a/board/o2dnt/o2dnt.c b/board/o2dnt/o2dnt.c index 37832de..19faf52 100644 --- a/board/o2dnt/o2dnt.c +++ b/board/o2dnt/o2dnt.c @@ -184,5 +184,6 @@ void pci_init_board(void) int board_eth_init(bd_t *bis) { + cpu_eth_init(bis); /* Built in FEC comes first */ return pci_eth_init(bis); } diff --git a/board/pm520/pm520.c b/board/pm520/pm520.c index c9610fb..a9d63cc 100644 --- a/board/pm520/pm520.c +++ b/board/pm520/pm520.c @@ -325,5 +325,6 @@ void doc_init (void) int board_eth_init(bd_t *bis) { + cpu_eth_init(bis); /* Built in FEC comes first */ return pci_eth_init(bis); } diff --git a/board/total5200/total5200.c b/board/total5200/total5200.c index c1848fc..ec00a67 100644 --- a/board/total5200/total5200.c +++ b/board/total5200/total5200.c @@ -312,5 +312,6 @@ int board_get_height (void) int board_eth_init(bd_t *bis) { + cpu_eth_init(bis); /* Built in FEC comes first */ return pci_eth_init(bis); } diff --git a/board/tqc/tqm5200/tqm5200.c b/board/tqc/tqm5200/tqm5200.c index d75aa9b..5152331 100644 --- a/board/tqc/tqm5200/tqm5200.c +++ b/board/tqc/tqm5200/tqm5200.c @@ -753,5 +753,6 @@ void ft_board_setup(void *blob, bd_t *bd) int board_eth_init(bd_t *bis) { + cpu_eth_init(bis); /* Built in FEC comes first */ return pci_eth_init(bis); } diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c index 0ed2899..1326c3c 100644 --- a/cpu/mpc5xxx/cpu.c +++ b/cpu/mpc5xxx/cpu.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include @@ -155,3 +156,15 @@ ulong bootcount_load (void) return (*save_addr & 0x0000ffff); } #endif /* CONFIG_BOOTCOUNT_LIMIT */ + +#ifdef CONFIG_MPC5xxx_FEC +/* Default initializations for FEC controllers. To override, + * create a board-specific function called: + * int board_eth_init(bd_t *bis) + */ + +int cpu_eth_init(bd_t *bis) +{ + return mpc5xxx_fec_initialize(bis); +} +#endif diff --git a/drivers/net/mpc5xxx_fec.c b/drivers/net/mpc5xxx_fec.c index 3d3eb8b..f8618b1 100644 --- a/drivers/net/mpc5xxx_fec.c +++ b/drivers/net/mpc5xxx_fec.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include "mpc5xxx_fec.h" diff --git a/include/netdev.h b/include/netdev.h index 487d319..f7738cc 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -50,6 +50,7 @@ int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); int mcdmafec_initialize(bd_t *bis); int mcffec_initialize(bd_t *bis); int mpc512x_fec_initialize(bd_t *bis); +int mpc5xxx_fec_initialize(bd_t *bis); int natsemi_initialize(bd_t *bis); int ns8382x_initialize(bd_t *bis); int pcnet_initialize(bd_t *bis); diff --git a/net/eth.c b/net/eth.c index b61d0fc..053179e 100644 --- a/net/eth.c +++ b/net/eth.c @@ -44,7 +44,6 @@ extern int dc21x4x_initialize(bd_t*); extern int e1000_initialize(bd_t*); extern int eepro100_initialize(bd_t*); extern int fec_initialize(bd_t*); -extern int mpc5xxx_fec_initialize(bd_t*); extern int mpc8220_fec_initialize(bd_t*); extern int mv6436x_eth_initialize(bd_t *); extern int mv6446x_eth_initialize(bd_t *); @@ -173,9 +172,6 @@ int eth_initialize(bd_t *bis) #ifdef SCC_ENET scc_initialize(bis); #endif -#if defined(CONFIG_MPC5xxx_FEC) - mpc5xxx_fec_initialize(bis); -#endif #if defined(CONFIG_MPC8220_FEC) mpc8220_fec_initialize(bis); #endif -- cgit v0.10.2 From 4fce2aceaf8afd31a252bc782c9dbc497bf40487 Mon Sep 17 00:00:00 2001 From: Ben Warren Date: Sun, 31 Aug 2008 10:40:51 -0700 Subject: Moved initialization of plb2800 Ethernet driver to board_eth_init Affected boards: purple Removed initialization of controller from net/eth.c Signed-off-by: Ben Warren diff --git a/board/purple/purple.c b/board/purple/purple.c index 9775591..c129d7a 100644 --- a/board/purple/purple.c +++ b/board/purple/purple.c @@ -23,6 +23,7 @@ #include #include +#include #include #include #include @@ -274,3 +275,11 @@ void copy_code (ulong dest_addr) start += CFG_CACHELINE_SIZE; } } + +#ifdef CONFIG_PLB2800_ETHER +int board_eth_init(bd_t *bis) +{ + return plb2800_eth_initialize(bis); +} +#endif + diff --git a/drivers/net/plb2800_eth.c b/drivers/net/plb2800_eth.c index dad842c..d799c73 100644 --- a/drivers/net/plb2800_eth.c +++ b/drivers/net/plb2800_eth.c @@ -26,6 +26,7 @@ #include #include #include +#include #include @@ -105,7 +106,7 @@ int plb2800_eth_initialize(bd_t * bis) if (!(dev = (struct eth_device *) malloc (sizeof *dev))) { printf("Failed to allocate memory\n"); - return 0; + return -1; } memset(dev, 0, sizeof(*dev)); @@ -140,7 +141,7 @@ int plb2800_eth_initialize(bd_t * bis) printf("Leaving plb2800_eth_initialize()\n"); #endif - return 1; + return 0; } static int plb2800_eth_init(struct eth_device *dev, bd_t * bis) diff --git a/include/netdev.h b/include/netdev.h index f7738cc..1013a80 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -54,6 +54,7 @@ int mpc5xxx_fec_initialize(bd_t *bis); int natsemi_initialize(bd_t *bis); int ns8382x_initialize(bd_t *bis); int pcnet_initialize(bd_t *bis); +int plb2800_eth_initialize(bd_t *bis); int rtl8139_initialize(bd_t *bis); int rtl8169_initialize(bd_t *bis); int skge_initialize(bd_t *bis); diff --git a/net/eth.c b/net/eth.c index 053179e..42c370b 100644 --- a/net/eth.c +++ b/net/eth.c @@ -47,7 +47,6 @@ extern int fec_initialize(bd_t*); extern int mpc8220_fec_initialize(bd_t*); extern int mv6436x_eth_initialize(bd_t *); extern int mv6446x_eth_initialize(bd_t *); -extern int plb2800_eth_initialize(bd_t*); extern int ppc_4xx_eth_initialize(bd_t *); extern int scc_initialize(bd_t*); extern int npe_initialize(bd_t *); @@ -166,9 +165,6 @@ int eth_initialize(bd_t *bis) #if defined(CONFIG_4xx) && !defined(CONFIG_IOP480) && !defined(CONFIG_AP1000) ppc_4xx_eth_initialize(bis); #endif -#ifdef CONFIG_PLB2800_ETHER - plb2800_eth_initialize(bis); -#endif #ifdef SCC_ENET scc_initialize(bis); #endif -- cgit v0.10.2 From ad3381cf4167120db5c7b88e4970245e1d5c0a32 Mon Sep 17 00:00:00 2001 From: Ben Warren Date: Sun, 31 Aug 2008 10:44:19 -0700 Subject: Moved initialization of E1000 Ethernet controller to board_eth_init() Affected boards: ap1000 mvbc_p PM854 Removed initialization of the driver from net/eth.c Signed-off-by: Ben Warren diff --git a/board/amirix/ap1000/ap1000.c b/board/amirix/ap1000/ap1000.c index 55277e7..8f30ed9 100644 --- a/board/amirix/ap1000/ap1000.c +++ b/board/amirix/ap1000/ap1000.c @@ -23,6 +23,7 @@ #include #include +#include #include #include "powerspan.h" @@ -697,3 +698,9 @@ U_BOOT_CMD (swrecon, 1, 0, do_swreconfig, "swrecon - trigger a board reconfigure to the software selected configuration\n", "\n" " - trigger a board reconfigure to the software selected configuration\n"); + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} + diff --git a/board/matrix_vision/mvbc_p/mvbc_p.c b/board/matrix_vision/mvbc_p/mvbc_p.c index 648b45e..c88c4a6 100644 --- a/board/matrix_vision/mvbc_p/mvbc_p.c +++ b/board/matrix_vision/mvbc_p/mvbc_p.c @@ -328,5 +328,6 @@ void ft_board_setup(void *blob, bd_t *bd) int board_eth_init(bd_t *bis) { - return cpu_eth_init(bis); /* Built in FEC comes first */ + cpu_eth_init(bis); /* Built in FEC comes first */ + return pci_eth_init(bis); } diff --git a/board/pm854/pm854.c b/board/pm854/pm854.c index 7dbafb9..f366814 100644 --- a/board/pm854/pm854.c +++ b/board/pm854/pm854.c @@ -27,6 +27,7 @@ #include #include +#include #include #include #include @@ -289,3 +290,8 @@ pci_init_board(void) pci_mpc85xx_init(&hose); #endif /* CONFIG_PCI */ } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index c8b4e98..2dcaa2c 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -3059,5 +3059,5 @@ e1000_initialize(bd_t * bis) card_number++; } - return 1; + return card_number; } diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h index c258bc2..08042a8 100644 --- a/drivers/net/e1000.h +++ b/drivers/net/e1000.h @@ -36,6 +36,7 @@ #include #include #include +#include #include #include diff --git a/include/netdev.h b/include/netdev.h index 1013a80..fa4d92d 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -42,6 +42,7 @@ int cpu_eth_init(bd_t *bis); /* Driver initialization prototypes */ int bfin_EMAC_initialize(bd_t *bis); +int e1000_initialize(bd_t *bis); int eth_3com_initialize (bd_t * bis); int greth_initialize(bd_t *bis); void gt6426x_eth_initialize(bd_t *bis); @@ -69,6 +70,9 @@ static inline int pci_eth_init(bd_t *bis) { int num = 0; +#ifdef CONFIG_E1000 + num += e1000_initialize(bis); +#endif #ifdef CONFIG_PCNET num += pcnet_initialize(bis); #endif diff --git a/net/eth.c b/net/eth.c index 42c370b..f9a9957 100644 --- a/net/eth.c +++ b/net/eth.c @@ -41,7 +41,6 @@ int board_eth_init(bd_t *bis) __attribute((weak, alias("__def_eth_init"))); extern int au1x00_enet_initialize(bd_t*); extern int dc21x4x_initialize(bd_t*); -extern int e1000_initialize(bd_t*); extern int eepro100_initialize(bd_t*); extern int fec_initialize(bd_t*); extern int mpc8220_fec_initialize(bd_t*); @@ -193,9 +192,6 @@ int eth_initialize(bd_t *bis) #if defined(CONFIG_IXP4XX_NPE) npe_initialize(bis); #endif -#ifdef CONFIG_E1000 - e1000_initialize(bis); -#endif #ifdef CONFIG_EEPRO100 eepro100_initialize(bis); #endif -- cgit v0.10.2 From 8ca0b3f99c4fce7a599dcaf92ae095496dc8c8e0 Mon Sep 17 00:00:00 2001 From: Ben Warren Date: Sun, 31 Aug 2008 10:45:44 -0700 Subject: Moved initialization of TULIP Ethernet controller to board_eth_init() Affected boards: cu824 bab7xx adciop dasa_sim mousse mpc8540eval musenki mvblue pcippc2/pcippc6 sbc8240 stxssa Removed initialization of the driver from net/eth.c Signed-off-by: Ben Warren diff --git a/board/cu824/cu824.c b/board/cu824/cu824.c index ecf6328..0fd4223 100644 --- a/board/cu824/cu824.c +++ b/board/cu824/cu824.c @@ -28,6 +28,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -91,3 +92,8 @@ void pci_init_board(void) { pci_mpc824x_init(&hose); } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/eltec/bab7xx/bab7xx.c b/board/eltec/bab7xx/bab7xx.c index af52352..8c56116 100644 --- a/board/eltec/bab7xx/bab7xx.c +++ b/board/eltec/bab7xx/bab7xx.c @@ -30,6 +30,7 @@ #include <74xx_7xx.h> #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -244,3 +245,8 @@ void video_get_info_str (int line_number, char *info) #endif /*---------------------------------------------------------------------------*/ + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/esd/adciop/adciop.c b/board/esd/adciop/adciop.c index 0f655b7..63aaf2c 100644 --- a/board/esd/adciop/adciop.c +++ b/board/esd/adciop/adciop.c @@ -22,6 +22,7 @@ */ #include +#include #include "adciop.h" /* ------------------------------------------------------------------------- */ @@ -95,3 +96,8 @@ int testdram (void) } /* ------------------------------------------------------------------------- */ + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/esd/dasa_sim/dasa_sim.c b/board/esd/dasa_sim/dasa_sim.c index fb0c77e..e061878 100644 --- a/board/esd/dasa_sim/dasa_sim.c +++ b/board/esd/dasa_sim/dasa_sim.c @@ -22,6 +22,7 @@ */ #include +#include #include "dasa_sim.h" /* ------------------------------------------------------------------------- */ @@ -222,3 +223,8 @@ int testdram (void) } /* ------------------------------------------------------------------------- */ + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/mousse/mousse.c b/board/mousse/mousse.c index f8f1529..7b61266 100644 --- a/board/mousse/mousse.c +++ b/board/mousse/mousse.c @@ -28,6 +28,7 @@ #include #include +#include #include #include "mousse.h" @@ -84,3 +85,8 @@ int misc_init_f (void) get_tod (); return 0; } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/mpc8540eval/mpc8540eval.c b/board/mpc8540eval/mpc8540eval.c index 7c54458..028a70f 100644 --- a/board/mpc8540eval/mpc8540eval.c +++ b/board/mpc8540eval/mpc8540eval.c @@ -24,6 +24,7 @@ */ #include +#include #include #include #include @@ -247,3 +248,14 @@ long int fixed_sdram (void) return (CFG_SDRAM_SIZE * 1024 * 1024); } #endif /* !defined(CONFIG_SPD_EEPROM) */ + +int board_eth_init(bd_t *bis) +{ + /* + * This board either has PCI NICs or uses the CPU's TSECs + * pci_eth_init() will return 0 if no NICs found, so in that case + * returning -1 will force cpu_eth_init() to be called. + */ + int num = pci_eth_init(bis); + return (num <= 0 ? -1 : num); +} diff --git a/board/musenki/musenki.c b/board/musenki/musenki.c index b2b70e7..6f9eeb2 100644 --- a/board/musenki/musenki.c +++ b/board/musenki/musenki.c @@ -24,6 +24,7 @@ #include #include #include +#include int checkboard (void) { @@ -102,3 +103,8 @@ void pci_init_board(void) { pci_mpc824x_init(&hose); } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/mvblue/mvblue.c b/board/mvblue/mvblue.c index a979102..056fee7 100644 --- a/board/mvblue/mvblue.c +++ b/board/mvblue/mvblue.c @@ -9,6 +9,7 @@ #include #include #include +#include #ifdef CONFIG_PCI #include @@ -245,4 +246,9 @@ void pci_init_board (void) { pci_mpc824x_init (&hose); } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} #endif diff --git a/board/pcippc2/pcippc2.c b/board/pcippc2/pcippc2.c index c1917c1..a3dbdc8 100644 --- a/board/pcippc2/pcippc2.c +++ b/board/pcippc2/pcippc2.c @@ -28,6 +28,7 @@ #include #include #include +#include #include "hardware.h" #include "pcippc2.h" @@ -243,3 +244,8 @@ U_BOOT_CMD( #endif #endif /* CONFIG_WATCHDOG */ + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/sbc8240/sbc8240.c b/board/sbc8240/sbc8240.c index 175720d..075e377 100644 --- a/board/sbc8240/sbc8240.c +++ b/board/sbc8240/sbc8240.c @@ -28,6 +28,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -103,3 +104,8 @@ int misc_init_r (void) return (0); } #endif /* CONFIG_MISC_INIT_R */ + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/stxssa/stxssa.c b/board/stxssa/stxssa.c index 124e123..71e9b08 100644 --- a/board/stxssa/stxssa.c +++ b/board/stxssa/stxssa.c @@ -39,6 +39,7 @@ #include #include #include +#include long int fixed_sdram (void); @@ -400,3 +401,10 @@ pci_init_board(void) pci_mpc85xx_init(hose); #endif /* CONFIG_PCI */ } + +int board_eth_init(bd_t *bis) +{ + cpu_eth_init(bis); /* Initialize TSECs first */ + return pci_eth_init(bis); +} + diff --git a/drivers/net/dc2114x.c b/drivers/net/dc2114x.c index 8117239..c0137a7 100644 --- a/drivers/net/dc2114x.c +++ b/drivers/net/dc2114x.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #undef DEBUG_SROM diff --git a/include/netdev.h b/include/netdev.h index fa4d92d..d8d1209 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -42,6 +42,7 @@ int cpu_eth_init(bd_t *bis); /* Driver initialization prototypes */ int bfin_EMAC_initialize(bd_t *bis); +int dc21x4x_initialize(bd_t *bis); int e1000_initialize(bd_t *bis); int eth_3com_initialize (bd_t * bis); int greth_initialize(bd_t *bis); @@ -70,6 +71,9 @@ static inline int pci_eth_init(bd_t *bis) { int num = 0; +#ifdef CONFIG_TULIP + num += dc21x4x_initialize(bis); +#endif #ifdef CONFIG_E1000 num += e1000_initialize(bis); #endif diff --git a/net/eth.c b/net/eth.c index f9a9957..ab37bc2 100644 --- a/net/eth.c +++ b/net/eth.c @@ -40,7 +40,6 @@ int cpu_eth_init(bd_t *bis) __attribute((weak, alias("__def_eth_init"))); int board_eth_init(bd_t *bis) __attribute((weak, alias("__def_eth_init"))); extern int au1x00_enet_initialize(bd_t*); -extern int dc21x4x_initialize(bd_t*); extern int eepro100_initialize(bd_t*); extern int fec_initialize(bd_t*); extern int mpc8220_fec_initialize(bd_t*); @@ -195,9 +194,6 @@ int eth_initialize(bd_t *bis) #ifdef CONFIG_EEPRO100 eepro100_initialize(bis); #endif -#ifdef CONFIG_TULIP - dc21x4x_initialize(bis); -#endif if (!eth_devices) { puts ("No ethernet found.\n"); show_boot_progress (-64); -- cgit v0.10.2 From 10efa024b8ffd9e6aaca63da8bddfdffdc672274 Mon Sep 17 00:00:00 2001 From: Ben Warren Date: Sun, 31 Aug 2008 20:37:00 -0700 Subject: Moved initialization of EEPRO100 Ethernet controller to board_eth_init() Affected boards: db64360 db64460 katmai taihu taishan yucca cpc45 cpu87 eXalion elppc debris kvme080 mpc8315erdb integratorap ixdp425 oxc pm826 pm828 pm854 pm856 ppmc7xx sc3 sc520_spunk sorcery tqm8272 tqm85xx utx8245 Removed initialization of the driver from net/eth.c Also, wrapped contents of pci_eth_init() by CONFIG_PCI. Signed-off-by: Ben Warren diff --git a/board/Marvell/db64360/db64360.c b/board/Marvell/db64360/db64360.c index 2a810a6..c03d03d 100644 --- a/board/Marvell/db64360/db64360.c +++ b/board/Marvell/db64360/db64360.c @@ -33,6 +33,7 @@ #include "../include/pci.h" #include "../include/mv_gen_reg.h" #include +#include #include "eth.h" #include "mpsc.h" @@ -929,3 +930,8 @@ void board_prebootm_init () icache_disable (); dcache_disable (); } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/Marvell/db64460/db64460.c b/board/Marvell/db64460/db64460.c index 1ae898d..8a05cd2 100644 --- a/board/Marvell/db64460/db64460.c +++ b/board/Marvell/db64460/db64460.c @@ -33,6 +33,7 @@ #include "../include/pci.h" #include "../include/mv_gen_reg.h" #include +#include #include "eth.h" #include "mpsc.h" @@ -929,3 +930,8 @@ void board_prebootm_init () icache_disable (); dcache_disable (); } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c index 08d89d7..172b581 100644 --- a/board/amcc/katmai/katmai.c +++ b/board/amcc/katmai/katmai.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include #include @@ -447,3 +448,8 @@ int post_hotkeys_pressed(void) return (ctrlc()); } #endif + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c index 254e3eb..266f260 100644 --- a/board/amcc/taihu/taihu.c +++ b/board/amcc/taihu/taihu.c @@ -28,6 +28,7 @@ #include #include #include +#include #include extern int lcd_init(void); @@ -200,3 +201,8 @@ int pci_pre_init(struct pci_controller *hose) return 1; } #endif /* CONFIG_PCI */ + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/amcc/taishan/taishan.c b/board/amcc/taishan/taishan.c index fdd82e7..cd432cb 100644 --- a/board/amcc/taishan/taishan.c +++ b/board/amcc/taishan/taishan.c @@ -27,6 +27,7 @@ #include #include #include +#include #ifdef CFG_INIT_SHOW_RESET_REG void show_reset_reg(void); @@ -311,3 +312,8 @@ int post_hotkeys_pressed(void) return (ctrlc()); } #endif + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c index 84c3938..e0c1268 100644 --- a/board/amcc/yucca/yucca.c +++ b/board/amcc/yucca/yucca.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -952,3 +953,8 @@ int onboard_pci_arbiter_selected(int core_pci) #endif return (BOARD_OPTION_NOT_SELECTED); } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/cpc45/cpc45.c b/board/cpc45/cpc45.c index f4e867c..16ead75 100644 --- a/board/cpc45/cpc45.c +++ b/board/cpc45/cpc45.c @@ -27,6 +27,7 @@ #include #include #include +#include int sysControlDisplay(int digit, uchar ascii_code); extern void Plx9030Init(void); @@ -273,3 +274,8 @@ void ide_led (uchar led, uchar status) writeb(val, BCSR_BASE + 0x04); } # endif + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/cpu87/cpu87.c b/board/cpu87/cpu87.c index f5a5de5..454987c 100644 --- a/board/cpu87/cpu87.c +++ b/board/cpu87/cpu87.c @@ -26,6 +26,7 @@ #include #include "cpu87.h" #include +#include /* * I/O Port configuration table @@ -339,3 +340,8 @@ void pci_init_board(void) pci_mpc8250_init(&hose); } #endif + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/eXalion/eXalion.c b/board/eXalion/eXalion.c index 385b498..c5dff24 100644 --- a/board/eXalion/eXalion.c +++ b/board/eXalion/eXalion.c @@ -30,6 +30,7 @@ #include #include #include +#include #include "piix_pci.h" #include "eXalion.h" @@ -290,3 +291,8 @@ void pci_init_board (void) { pci_mpc824x_init (&hose); } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/eltec/elppc/elppc.c b/board/eltec/elppc/elppc.c index 1b70605..d3ac278 100644 --- a/board/eltec/elppc/elppc.c +++ b/board/eltec/elppc/elppc.c @@ -25,6 +25,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -172,3 +173,8 @@ void video_get_info_str (int line_number, char *info) return; } #endif + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/etin/debris/debris.c b/board/etin/debris/debris.c index 763760f..3fcf78e 100644 --- a/board/etin/debris/debris.c +++ b/board/etin/debris/debris.c @@ -25,6 +25,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -177,3 +178,8 @@ int misc_init_r(void) (char*)&gd->bd->bi_enetaddr[0], 6); return 0; } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/etin/kvme080/kvme080.c b/board/etin/kvme080/kvme080.c index bfd6854..be6924d 100644 --- a/board/etin/kvme080/kvme080.c +++ b/board/etin/kvme080/kvme080.c @@ -25,6 +25,7 @@ #include #include #include +#include #include int checkboard(void) @@ -191,3 +192,8 @@ void nvram_write(long dest, const void *src, size_t count) asm volatile("sync"); } } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/freescale/mpc8315erdb/mpc8315erdb.c b/board/freescale/mpc8315erdb/mpc8315erdb.c index 3eecee2..0330218 100644 --- a/board/freescale/mpc8315erdb/mpc8315erdb.c +++ b/board/freescale/mpc8315erdb/mpc8315erdb.c @@ -29,6 +29,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -165,3 +166,9 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_tsec1_fixup(blob, bd); } #endif + +int board_eth_init(bd_t *bis) +{ + cpu_eth_init(bis); /* Initialize TSECs first */ + return pci_eth_init(bis); +} diff --git a/board/integratorap/integratorap.c b/board/integratorap/integratorap.c index e659907..687c486 100644 --- a/board/integratorap/integratorap.c +++ b/board/integratorap/integratorap.c @@ -39,6 +39,8 @@ #include #endif +#include + DECLARE_GLOBAL_DATA_PTR; void flash__init (void); @@ -647,3 +649,8 @@ ulong get_tbclk (void) { return CFG_HZ_CLOCK/div_clock; } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/ixdp425/ixdp425.c b/board/ixdp425/ixdp425.c index e0d7637..b379c75 100644 --- a/board/ixdp425/ixdp425.c +++ b/board/ixdp425/ixdp425.c @@ -31,6 +31,7 @@ #include #include #include +#include #include DECLARE_GLOBAL_DATA_PTR; @@ -118,3 +119,8 @@ void pci_init_board(void) pci_ixp_init(&hose); } #endif + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/oxc/oxc.c b/board/oxc/oxc.c index b61d399..eb7eeb8 100644 --- a/board/oxc/oxc.c +++ b/board/oxc/oxc.c @@ -25,6 +25,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -215,3 +216,8 @@ int misc_init_r (void) #endif return (0); } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/pm826/pm826.c b/board/pm826/pm826.c index 7ee3ab6..d8b0929 100644 --- a/board/pm826/pm826.c +++ b/board/pm826/pm826.c @@ -25,6 +25,7 @@ #include #include #include +#include /* * I/O Port configuration table @@ -328,3 +329,8 @@ void pci_init_board(void) pci_mpc8250_init(&hose); } #endif + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/pm828/pm828.c b/board/pm828/pm828.c index 6038e97..b163d5b 100644 --- a/board/pm828/pm828.c +++ b/board/pm828/pm828.c @@ -25,6 +25,7 @@ #include #include #include +#include /* * I/O Port configuration table @@ -361,3 +362,8 @@ void pci_init_board(void) pci_mpc8250_init(&hose); } #endif + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/pm854/pm854.c b/board/pm854/pm854.c index f366814..90523bd 100644 --- a/board/pm854/pm854.c +++ b/board/pm854/pm854.c @@ -293,5 +293,6 @@ pci_init_board(void) int board_eth_init(bd_t *bis) { + cpu_eth_init(bis); /* Intialize TSECs first */ return pci_eth_init(bis); } diff --git a/board/pm856/pm856.c b/board/pm856/pm856.c index bd4c065..ee33286 100644 --- a/board/pm856/pm856.c +++ b/board/pm856/pm856.c @@ -34,6 +34,7 @@ #include #include #include +#include #if defined(CONFIG_DDR_ECC) extern void ddr_enable_ecc(unsigned int dram_size); @@ -444,3 +445,9 @@ pci_init_board(void) pci_mpc85xx_init(&hose); #endif /* CONFIG_PCI */ } + +int board_eth_init(bd_t *bis) +{ + cpu_eth_init(bis); /* Intialize TSECs first */ + return pci_eth_init(bis); +} diff --git a/board/ppmc7xx/ppmc7xx.c b/board/ppmc7xx/ppmc7xx.c index 061e01e..9c87c10 100644 --- a/board/ppmc7xx/ppmc7xx.c +++ b/board/ppmc7xx/ppmc7xx.c @@ -10,6 +10,7 @@ #include #include +#include /* Define some MPC107 (memory controller) registers */ @@ -102,3 +103,8 @@ void do_reset( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] ) /* Should never get here */ while(1); } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/sc3/sc3.c b/board/sc3/sc3.c index 3d1a654..6c82fe7 100644 --- a/board/sc3/sc3.c +++ b/board/sc3/sc3.c @@ -37,6 +37,7 @@ #include #include #include +#include #undef writel #undef writeb @@ -779,3 +780,8 @@ void pci_init_board(void) hose.config_table = pci_solidcard3_config_table; pci_405gp_init(&hose); } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/sc520_spunk/sc520_spunk.c b/board/sc520_spunk/sc520_spunk.c index 038d479..0b11caa 100644 --- a/board/sc520_spunk/sc520_spunk.c +++ b/board/sc520_spunk/sc520_spunk.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -676,3 +677,8 @@ ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len) spi_eeprom_write(1, offset, buffer, len) : mw_eeprom_write(1, offset, buffer, len); } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/sorcery/sorcery.c b/board/sorcery/sorcery.c index 2b789d4..e4fb146 100644 --- a/board/sorcery/sorcery.c +++ b/board/sorcery/sorcery.c @@ -26,6 +26,7 @@ #include #include #include +#include phys_size_t initdram (int board_type) { @@ -58,3 +59,8 @@ void pci_init_board (void) pci_mpc8220_init (&hose); #endif /* CONFIG_PCI */ } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/tqc/tqm8272/tqm8272.c b/board/tqc/tqm8272/tqm8272.c index a0ec254..3a2376c 100644 --- a/board/tqc/tqm8272/tqm8272.c +++ b/board/tqc/tqm8272/tqm8272.c @@ -26,6 +26,7 @@ #include #include +#include #ifdef CONFIG_PCI #include #include @@ -1226,3 +1227,8 @@ void pci_init_board(void) pci_mpc8250_init(&hose); } #endif + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c index ae3c245..0e5bc2f 100644 --- a/board/tqc/tqm85xx/tqm85xx.c +++ b/board/tqc/tqm85xx/tqm85xx.c @@ -42,6 +42,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -743,3 +744,9 @@ int board_early_init_r (void) return (0); } #endif /* CONFIG_BOARD_EARLY_INIT_R */ + +int board_eth_init(bd_t *bis) +{ + cpu_eth_init(bis); /* Intialize TSECs first */ + return pci_eth_init(bis); +} diff --git a/board/utx8245/utx8245.c b/board/utx8245/utx8245.c index e2a961a..e7ca669 100644 --- a/board/utx8245/utx8245.c +++ b/board/utx8245/utx8245.c @@ -32,6 +32,7 @@ #include #include #include +#include #define SAVE_SZ 32 @@ -127,3 +128,8 @@ void pci_init_board (void) icache_enable(); } + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c index 9de0fb5..d6539c0 100644 --- a/drivers/net/eepro100.c +++ b/drivers/net/eepro100.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include diff --git a/include/netdev.h b/include/netdev.h index d8d1209..8b181f7 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -44,6 +44,7 @@ int cpu_eth_init(bd_t *bis); int bfin_EMAC_initialize(bd_t *bis); int dc21x4x_initialize(bd_t *bis); int e1000_initialize(bd_t *bis); +int eepro100_initialize(bd_t *bis); int eth_3com_initialize (bd_t * bis); int greth_initialize(bd_t *bis); void gt6426x_eth_initialize(bd_t *bis); @@ -71,6 +72,11 @@ static inline int pci_eth_init(bd_t *bis) { int num = 0; +#ifdef CONFIG_PCI + +#ifdef CONFIG_EEPRO100 + num += eepro100_initialize(bis); +#endif #ifdef CONFIG_TULIP num += dc21x4x_initialize(bis); #endif @@ -95,6 +101,8 @@ static inline int pci_eth_init(bd_t *bis) #if defined(CONFIG_ULI526) num += uli526x_initialize(bis); #endif + +#endif /* CONFIG_PCI */ return num; } diff --git a/net/eth.c b/net/eth.c index ab37bc2..432dd60 100644 --- a/net/eth.c +++ b/net/eth.c @@ -40,7 +40,6 @@ int cpu_eth_init(bd_t *bis) __attribute((weak, alias("__def_eth_init"))); int board_eth_init(bd_t *bis) __attribute((weak, alias("__def_eth_init"))); extern int au1x00_enet_initialize(bd_t*); -extern int eepro100_initialize(bd_t*); extern int fec_initialize(bd_t*); extern int mpc8220_fec_initialize(bd_t*); extern int mv6436x_eth_initialize(bd_t *); @@ -191,9 +190,6 @@ int eth_initialize(bd_t *bis) #if defined(CONFIG_IXP4XX_NPE) npe_initialize(bis); #endif -#ifdef CONFIG_EEPRO100 - eepro100_initialize(bis); -#endif if (!eth_devices) { puts ("No ethernet found.\n"); show_boot_progress (-64); -- cgit v0.10.2 From 33314470ab32a3f5412bb61b5f3d6c216c88bf9b Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Thu, 28 Aug 2008 13:40:44 +0900 Subject: net: smc911x: Add pkt_data_pull and pkt_data_push function The RSK7203 board has the SMSC9118 wired up 'incorrectly'. Byte-swapping is necessary, and so poor performance is inevitable. This problem cannot evade by the swap function of CHIP, this can evade by software Byte-swapping. And this has problem by FIFO access only. pkt_data_pull/pkt_data_push functions necessary to solve this problem. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Ben Warren diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 0fff820..648c94c 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -57,6 +57,11 @@ static inline void reg_write(u32 addr, u32 val) #error "SMC911X: undefined bus width" #endif /* CONFIG_DRIVER_SMC911X_16_BIT */ +u32 pkt_data_pull(u32 addr) \ + __attribute__ ((weak, alias ("reg_read"))); +void pkt_data_push(u32 addr, u32 val) \ + __attribute__ ((weak, alias ("reg_write"))); + #define mdelay(n) udelay((n)*1000) /* Below are the register offsets and bit definitions @@ -641,7 +646,7 @@ int eth_send(volatile void *packet, int length) tmplen = (length + 3) / 4; while (tmplen--) - reg_write(TX_DATA_FIFO, *data++); + pkt_data_push(TX_DATA_FIFO, *data++); /* wait for transmission */ while (!((reg_read(TX_FIFO_INF) & TX_FIFO_INF_TSUSED) >> 16)); @@ -684,7 +689,7 @@ int eth_rx(void) tmplen = (pktlen + 2+ 3) / 4; while (tmplen--) - *data++ = reg_read(RX_DATA_FIFO); + *data++ = pkt_data_pull(RX_DATA_FIFO); if (status & RX_STS_ES) printf(DRIVERNAME -- cgit v0.10.2 From be1b0d2777e179191a57b138b660547a17e55aad Mon Sep 17 00:00:00 2001 From: Jochen Friedrich Date: Tue, 2 Sep 2008 11:24:59 +0200 Subject: Don't tftp to unknown flash If a board has a variable number of flash banks, there are empty entries in flash_info[] and CFG_DIRECT_FLASH_TFTP is set, tftp boot fails with "Outside available Flash". This patch skips flash banks with unknown flash ids. Signed-off-by: Jochen Friedrich Signed-off-by: Ben Warren diff --git a/net/tftp.c b/net/tftp.c index 84d83ca..9aeecb8 100644 --- a/net/tftp.c +++ b/net/tftp.c @@ -111,6 +111,8 @@ store_block (unsigned block, uchar * src, unsigned len) for (i=0; i= flash_info[i].start[0]) { rc = 1; break; -- cgit v0.10.2