From 576007aec9a4a5f4f3dd1f690fb26a8c05ceb75f Mon Sep 17 00:00:00 2001 From: Sylvain Lemieux Date: Mon, 27 Jul 2015 13:37:35 -0400 Subject: lpc32xx: cpu: add support for soft reset Add support for optional soft reset (i.e. "RESOUT_N" not asserted during reset). To be compatible with the original U-Boot code, when the "addr" parameter is 0, a hard is performed; for any other values, a soft reset is done. Signed-off-by: Sylvain Lemieux diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c b/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c index f757474..bee9318 100644 --- a/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c +++ b/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2011 by Vladimir Zapolskiy + * Copyright (C) 2011-2015 by Vladimir Zapolskiy * * SPDX-License-Identifier: GPL-2.0+ */ @@ -20,12 +20,23 @@ void reset_cpu(ulong addr) /* Enable watchdog clock */ setbits_le32(&clk->timclk_ctrl, CLK_TIMCLK_WATCHDOG); - /* Reset pulse length is 13005 peripheral clock frames */ - writel(13000, &wdt->pulse); + /* To be compatible with the original U-Boot code: + * addr: - 0: perform hard reset. + * - !=0: perform a soft reset; i.e. "RESOUT_N" not asserted). */ + if (addr == 0) { + /* Reset pulse length is 13005 peripheral clock frames */ + writel(13000, &wdt->pulse); - /* Force WDOG_RESET2 and RESOUT_N signal active */ - writel(WDTIM_MCTRL_RESFRC2 | WDTIM_MCTRL_RESFRC1 | WDTIM_MCTRL_M_RES2, - &wdt->mctrl); + /* Force WDOG_RESET2 and RESOUT_N signal active */ + writel(WDTIM_MCTRL_RESFRC2 | WDTIM_MCTRL_RESFRC1 + | WDTIM_MCTRL_M_RES2, &wdt->mctrl); + } else { + /* Force match output active */ + writel(0x01, &wdt->emr); + + /* Internal reset on match output (no pulse on "RESOUT_N") */ + writel(WDTIM_MCTRL_M_RES1, &wdt->mctrl); + } while (1) /* NOP */; -- cgit v0.10.2