From 942cb0b6a29f74507adeb0bce7ff7f23f69faf84 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sat, 7 Feb 2015 10:47:30 -0700 Subject: sunxi: Normalise FEL support Make sunxi's FEL code fit with the normal U-Boot boot sequence instead of creating its own. There are some #ifdefs required in start.S. Future work will hopefully remove these. This series is available at u-boot-dm, branch sunxi-working. Signed-off-by: Simon Glass Acked-by: Hans de Goede Signed-off-by: Hans de Goede diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 9b49ece..098a83a 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -54,7 +54,8 @@ save_boot_params_ret: * (OMAP4 spl TEXT_BASE is not 32 byte aligned. * Continue to use ROM code vector only in OMAP4 spl) */ -#if !(defined(CONFIG_OMAP44XX) && defined(CONFIG_SPL_BUILD)) +#if !(defined(CONFIG_OMAP44XX) && defined(CONFIG_SPL_BUILD)) && \ + !defined(CONFIG_SPL_FEL) /* Set V=0 in CP15 SCTLR register - for VBAR to point to vector */ mrc p15, 0, r0, c1, c0, 0 @ Read CP15 SCTLR Register bic r0, #CR_V @ V = 0 @@ -67,7 +68,9 @@ save_boot_params_ret: /* the mask ROM code should have PLL and others stable */ #ifndef CONFIG_SKIP_LOWLEVEL_INIT +#ifndef CONFIG_SPL_FEL bl cpu_init_cp15 +#endif bl cpu_init_crit #endif diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile index a790a23..4bb12ad 100644 --- a/arch/arm/cpu/armv7/sunxi/Makefile +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -39,7 +39,5 @@ obj-$(CONFIG_MACH_SUN5I) += dram_sun4i.o obj-$(CONFIG_MACH_SUN6I) += dram_sun6i.o obj-$(CONFIG_MACH_SUN7I) += dram_sun4i.o obj-$(CONFIG_MACH_SUN8I) += dram_sun8i.o -ifdef CONFIG_SPL_FEL -obj-y += start.o -endif +obj-y += fel_utils.o endif diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index 6e28bcd..b7492ac 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -27,6 +27,13 @@ #include +struct fel_stash { + uint32_t sp; + uint32_t lr; +}; + +struct fel_stash fel_stash __attribute__((section(".data"))); + static int gpio_init(void) { #if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F) @@ -65,6 +72,12 @@ static int gpio_init(void) return 0; } +void spl_board_load_image(void) +{ + debug("Returning to FEL sp=%x, lr=%x\n", fel_stash.sp, fel_stash.lr); + return_to_fel(fel_stash.sp, fel_stash.lr); +} + void s_init(void) { #if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I @@ -95,6 +108,14 @@ void s_init(void) */ u32 spl_boot_device(void) { + /* + * Have we been asked to return to the FEL portion of the boot ROM? + * TODO: We need a more robust test here, or bracket this with + * #ifdef CONFIG_SPL_FEL. + */ + if (fel_stash.lr >= 0xffff0000 && fel_stash.lr < 0xffff4000) + return BOOT_DEVICE_BOARD; + return BOOT_DEVICE_MMC1; } diff --git a/arch/arm/cpu/armv7/sunxi/config.mk b/arch/arm/cpu/armv7/sunxi/config.mk index 00f5ffc..76ffec9 100644 --- a/arch/arm/cpu/armv7/sunxi/config.mk +++ b/arch/arm/cpu/armv7/sunxi/config.mk @@ -1,8 +1,6 @@ # Build a combined spl + u-boot image ifdef CONFIG_SPL ifndef CONFIG_SPL_BUILD -ifndef CONFIG_SPL_FEL ALL-y += u-boot-sunxi-with-spl.bin endif endif -endif diff --git a/arch/arm/cpu/armv7/sunxi/fel_utils.S b/arch/arm/cpu/armv7/sunxi/fel_utils.S new file mode 100644 index 0000000..0c1de52 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/fel_utils.S @@ -0,0 +1,25 @@ +/* + * Utility functions for FEL mode. + * + * Copyright (c) 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +ENTRY(save_boot_params) + ldr r0, =fel_stash + str sp, [r0, #0] + str lr, [r0, #4] + b save_boot_params_ret +ENDPROC(save_boot_params) + +ENTRY(return_to_fel) + mov sp, r0 + mov lr, r1 + bx lr +ENDPROC(return_to_fel) diff --git a/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds b/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds deleted file mode 100644 index 928b7c1..0000000 --- a/arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2013 - * Henrik Nordstrom - * - * SPDX-License-Identifier: GPL-2.0+ - */ -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(s_init) -SECTIONS -{ - . = 0x00002000; - - . = ALIGN(4); - .text : - { - *(.text.s_init) - *(.text*) - } - - . = ALIGN(4); - .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } - - . = ALIGN(4); - .data : { - *(.data*) - } - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - . = ALIGN(4); - . = .; - - . = ALIGN(4); - .rel.dyn : { - __rel_dyn_start = .; - *(.rel*) - __rel_dyn_end = .; - } - - .dynsym : { - __dynsym_start = .; - *(.dynsym) - } - - . = ALIGN(4); - .note.gnu.build-id : - { - *(.note.gnu.build-id) - } - _end = .; - - . = ALIGN(4096); - .mmutable : { - *(.mmutable) - } - - .bss_start __rel_dyn_start (OVERLAY) : { - KEEP(*(.__bss_start)); - __bss_base = .; - } - - .bss __bss_base (OVERLAY) : { - *(.bss*) - . = ALIGN(4); - __bss_limit = .; - } - - .bss_end __bss_limit (OVERLAY) : { - KEEP(*(.__bss_end)); - } - - /DISCARD/ : { *(.dynstr*) } - /DISCARD/ : { *(.dynamic*) } - /DISCARD/ : { *(.plt*) } - /DISCARD/ : { *(.interp*) } - /DISCARD/ : { *(.gnu*) } - /DISCARD/ : { *(.note*) } -} diff --git a/arch/arm/include/asm/arch-sunxi/sys_proto.h b/arch/arm/include/asm/arch-sunxi/sys_proto.h index c3e636e..60a5bd8 100644 --- a/arch/arm/include/asm/arch-sunxi/sys_proto.h +++ b/arch/arm/include/asm/arch-sunxi/sys_proto.h @@ -13,4 +13,14 @@ void sdelay(unsigned long); +/* return_to_fel() - Return to BROM from SPL + * + * This returns back into the BROM after U-Boot SPL has performed its initial + * init. It uses the provided lr and sp to do so. + * + * @lr: BROM link register value (return address) + * @sp: BROM stack pointer + */ +void return_to_fel(uint32_t lr, uint32_t sp); + #endif diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 4a21589..3eab81f 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -149,6 +149,16 @@ config SPL_FEL bool "SPL/FEL mode support" depends on SPL default n + help + This enables support for Fast Early Loader (FEL) mode. This + allows U-Boot to be loaded to the board over USB by the on-chip + boot rom. U-Boot should be sent in two parts: SPL first, with + 'fel write 0x2000 u-boot-spl.bin; fel exe 0x2000' then U-Boot with + 'fel write 0x4a000000 u-boot.bin; fel exe 0x4a000000'. This option + shrinks the amount of SRAM available to SPL, so only enable it if + you need FEL. Note that enabling this option only allows FEL to be + used; it is still possible to boot U-Boot from boot media. U-Boot + SPL detects when it is being loaded using FEL. config UART0_PORT_F bool "UART0 on MicroSD breakout board" diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 33c0614..5ece020 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -18,10 +18,8 @@ */ #define CONFIG_SUNXI /* sunxi family */ #ifdef CONFIG_SPL_BUILD -#ifndef CONFIG_SPL_FEL #define CONFIG_SYS_THUMB_BUILD /* Thumbs mode to save space in SPL */ #endif -#endif #include /* get chip and board defs */ @@ -149,10 +147,10 @@ #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_BOARD_LOAD_IMAGE + #ifdef CONFIG_SPL_FEL -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds" -#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7/sunxi" #define CONFIG_SPL_TEXT_BASE 0x2000 #define CONFIG_SPL_MAX_SIZE 0x4000 /* 16 KiB */ diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl index e4b9881..cc189ad 100644 --- a/scripts/Makefile.spl +++ b/scripts/Makefile.spl @@ -154,10 +154,8 @@ ALL-y += $(obj)/$(BOARD)-spl.bin endif ifdef CONFIG_SUNXI -ifndef CONFIG_SPL_FEL ALL-y += $(obj)/sunxi-spl.bin endif -endif ifeq ($(CONFIG_SYS_SOC),"at91") ALL-y += boot.bin -- cgit v0.10.2