From d3cf9eb2d87c8961408ec5aa6ebe0c54f2c13724 Mon Sep 17 00:00:00 2001 From: "eric.gao@rock-chips.com" Date: Mon, 10 Apr 2017 10:41:46 +0800 Subject: rockchip: pmic: Enable RK808 for rk3399 evb For using mipi display, we need to enable lcd3v3 which supplied by rk808,so enable rk808 first. Signed-off-by: Eric Gao Acked-by: Simon Glass diff --git a/arch/arm/dts/rk3399-evb.dts b/arch/arm/dts/rk3399-evb.dts index c3a7ca2..e1f867b 100644 --- a/arch/arm/dts/rk3399-evb.dts +++ b/arch/arm/dts/rk3399-evb.dts @@ -30,6 +30,13 @@ status = "okay"; }; + vccsys: vccsys { + compatible = "regulator-fixed"; + regulator-name = "vccsys"; + regulator-boot-on; + regulator-always-on; + }; + vcc3v3_sys: vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; @@ -51,6 +58,7 @@ regulator-name = "vcc5v0_host"; gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; }; + }; &emmc_phy { @@ -112,6 +120,37 @@ status = "okay"; }; +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <100>; + u-boot,dm-pre-reloc; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + clock-output-names = "xin32k", "wifibt_32kin"; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + reg = <0x1b>; + rockchip,system-power-controller; + #clock-cells = <1>; + u-boot,dm-pre-reloc; + status = "okay"; + + vcc12-supply = <&vcc3v3_sys>; + regulators { + vcc33_lcd: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc33_lcd"; + }; + }; + }; +}; + &pinctrl { pmic { pmic_int_l: pmic-int-l { diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig index c644084..cef8506 100644 --- a/configs/evb-rk3399_defconfig +++ b/configs/evb-rk3399_defconfig @@ -61,3 +61,8 @@ CONFIG_USB_STORAGE=y CONFIG_USE_TINY_PRINTF=y CONFIG_ERRNO_STR=y CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_CHILDREN=y +CONFIG_SPL_PMIC_CHILDREN=y +CONFIG_PMIC_RK808=y +CONFIG_REGULATOR_RK808=y -- cgit v0.10.2