From 3eb8f58d759fa243c09195acff6ff9d6f4e3636f Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 30 Aug 2015 19:19:05 -0600 Subject: arm: Remove ima3-mx53 board This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 34c20e9..277339f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -485,10 +485,6 @@ config TARGET_M53EVK select CPU_V7 select SUPPORT_SPL -config TARGET_IMA3_MX53 - bool "Support ima3-mx53" - select CPU_V7 - config TARGET_MX51EVK bool "Support mx51evk" select CPU_V7 @@ -808,7 +804,6 @@ source "board/creative/xfi3/Kconfig" source "board/davedenx/qong/Kconfig" source "board/denx/m28evk/Kconfig" source "board/denx/m53evk/Kconfig" -source "board/esg/ima3-mx53/Kconfig" source "board/freescale/ls2085a/Kconfig" source "board/freescale/ls2085aqds/Kconfig" source "board/freescale/ls2085ardb/Kconfig" diff --git a/board/esg/ima3-mx53/Kconfig b/board/esg/ima3-mx53/Kconfig deleted file mode 100644 index d73238f..0000000 --- a/board/esg/ima3-mx53/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_IMA3_MX53 - -config SYS_BOARD - default "ima3-mx53" - -config SYS_VENDOR - default "esg" - -config SYS_SOC - default "mx5" - -config SYS_CONFIG_NAME - default "ima3-mx53" - -endif diff --git a/board/esg/ima3-mx53/MAINTAINERS b/board/esg/ima3-mx53/MAINTAINERS deleted file mode 100644 index 96de081..0000000 --- a/board/esg/ima3-mx53/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -IMA3-MX53 BOARD -#M: - -S: Maintained -F: board/esg/ima3-mx53/ -F: include/configs/ima3-mx53.h -F: configs/ima3-mx53_defconfig diff --git a/board/esg/ima3-mx53/Makefile b/board/esg/ima3-mx53/Makefile deleted file mode 100644 index afb8925..0000000 --- a/board/esg/ima3-mx53/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Copyright (C) 2012, Stefano Babic -# -# Based on ti/evm/Makefile -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := ima3-mx53.o diff --git a/board/esg/ima3-mx53/ima3-mx53.c b/board/esg/ima3-mx53/ima3-mx53.c deleted file mode 100644 index df758ee..0000000 --- a/board/esg/ima3-mx53/ima3-mx53.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * (C) Copyright 2012, Stefano Babic - * - * (C) Copyright 2010 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* NOR flash configuration */ -#define IMA3_MX53_CS0GCR1 (CSEN | DSZ(2)) -#define IMA3_MX53_CS0GCR2 0 -#define IMA3_MX53_CS0RCR1 (RCSN(2) | OEN(1) | RWSC(15)) -#define IMA3_MX53_CS0RCR2 0 -#define IMA3_MX53_CS0WCR1 (WBED1 | WCSN(2) | WEN(1) | WWSC(15)) -#define IMA3_MX53_CS0WCR2 0 - -DECLARE_GLOBAL_DATA_PTR; - -static void weim_nor_settings(void) -{ - struct weim *weim_regs = (struct weim *)WEIM_BASE_ADDR; - - writel(IMA3_MX53_CS0GCR1, &weim_regs->cs0gcr1); - writel(IMA3_MX53_CS0GCR2, &weim_regs->cs0gcr2); - writel(IMA3_MX53_CS0RCR1, &weim_regs->cs0rcr1); - writel(IMA3_MX53_CS0RCR2, &weim_regs->cs0rcr2); - writel(IMA3_MX53_CS0WCR1, &weim_regs->cs0wcr1); - writel(IMA3_MX53_CS0WCR2, &weim_regs->cs0wcr2); - writel(0x0, &weim_regs->wcr); - - set_chipselect_size(CS0_128); -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE, - PHYS_SDRAM_1_SIZE); - return 0; -} - -#define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_ODE) - -static void setup_iomux_uart(void) -{ - static const iomux_v3_cfg_t uart_pads[] = { - NEW_PAD_CTRL(MX53_PAD_CSI0_DAT13__UART4_RXD_MUX, UART_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_CSI0_DAT12__UART4_TXD_MUX, UART_PAD_CTRL), - }; - - imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); -} - -static void setup_iomux_fec(void) -{ - static const iomux_v3_cfg_t fec_pads[] = { - NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS | - PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE), - NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_KEY_COL0__FEC_RDATA_3, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_KEY_COL2__FEC_RDATA_2, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_GPIO_19__FEC_TDATA_3, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_KEY_ROW2__FEC_TDATA_2, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH), - NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_KEY_COL3__FEC_CRS, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_KEY_ROW1__FEC_COL, - PAD_CTL_HYS | PAD_CTL_PKE), - NEW_PAD_CTRL(MX53_PAD_KEY_COL1__FEC_RX_CLK, - PAD_CTL_HYS | PAD_CTL_PKE), - }; - - imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); -} - -#ifdef CONFIG_FSL_ESDHC -struct fsl_esdhc_cfg esdhc_cfg = { MMC_SDHC1_BASE_ADDR }; - -int board_mmc_getcd(struct mmc *mmc) -{ - int ret; - - ret = !gpio_get_value(IMX_GPIO_NR(1, 1)); - - return ret; -} - -#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ - PAD_CTL_PUS_100K_UP) -#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \ - PAD_CTL_DSE_HIGH) -#define SD_CD_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_HYS | PAD_CTL_PKE) - -int board_mmc_init(bd_t *bis) -{ - static const iomux_v3_cfg_t sd1_pads[] = { - NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_GPIO_1__GPIO1_1, SD_CD_PAD_CTRL), - }; - - imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads)); - gpio_direction_input(IMX_GPIO_NR(1, 1)); - - esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); - return fsl_esdhc_initialize(bis, &esdhc_cfg); -} -#endif - -#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP) - -static void setup_iomux_spi(void) -{ - static const iomux_v3_cfg_t spi_pads[] = { - NEW_PAD_CTRL(MX53_PAD_CSI0_DAT8__ECSPI2_SCLK, SPI_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_CSI0_DAT9__ECSPI2_MOSI, SPI_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_CSI0_DAT10__ECSPI2_MISO, SPI_PAD_CTRL), - /* SSEL 0 */ - NEW_PAD_CTRL(MX53_PAD_CSI0_DAT11__GPIO5_29, SPI_PAD_CTRL), - }; - - imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads)); - gpio_direction_output(IMX_GPIO_NR(5, 29), 1); -} - -int board_early_init_f(void) -{ - /* configure I/O pads */ - setup_iomux_uart(); - setup_iomux_fec(); - - weim_nor_settings(); - - /* configure spi */ - setup_iomux_spi(); - - return 0; -} - -int board_init(void) -{ - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - mxc_set_sata_internal_clock(); - - return 0; -} - -#if defined(CONFIG_RESET_PHY_R) -#include - -void reset_phy(void) -{ - unsigned short reg; - - /* reset the phy */ - miiphy_reset("FEC", CONFIG_PHY_ADDR); - - /* set hard link to 100Mbit, full-duplex */ - miiphy_read("FEC", CONFIG_PHY_ADDR, MII_BMCR, ®); - reg &= ~BMCR_ANENABLE; - reg |= (BMCR_SPEED100 | BMCR_FULLDPLX); - miiphy_write("FEC", CONFIG_PHY_ADDR, MII_BMCR, reg); - - miiphy_read("FEC", CONFIG_PHY_ADDR, 0x16, ®); - reg |= (1 << 5); - miiphy_write("FEC", CONFIG_PHY_ADDR, 0x16, reg); -} -#endif - -int checkboard(void) -{ - puts("Board: IMA3_MX53\n"); - - return 0; -} diff --git a/board/esg/ima3-mx53/imximage.cfg b/board/esg/ima3-mx53/imximage.cfg deleted file mode 100644 index 324a90e..0000000 --- a/board/esg/ima3-mx53/imximage.cfg +++ /dev/null @@ -1,104 +0,0 @@ -/* - * (C) Copyright 2012 - * Stefano Babic DENX Software Engineering sbabic@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Refer doc/README.imximage for more details about how-to configure - * and create imximage boot image - * - * The syntax is taken as close as possible with the kwbimage - */ - -/* image version */ -IMAGE_VERSION 2 - -/* - * Boot Device : one of - * spi, sd (the board has no nand neither onenand) - */ -BOOT_FROM nor - -/* - * Device Configuration Data (DCD) - * - * Each entry must have the format: - * Addr-type Address Value - * - * where: - * Addr-type register length (1,2 or 4 bytes) - * Address absolute address of the register - * value value to be stored in the register - */ -/* IOMUX for RAM only */ -DATA 4 0x53fa8554 0x300020 -DATA 4 0x53fa8560 0x300020 -DATA 4 0x53fa8594 0x300020 -DATA 4 0x53fa8584 0x300020 -DATA 4 0x53fa8558 0x300040 -DATA 4 0x53fa8568 0x300040 -DATA 4 0x53fa8590 0x300040 -DATA 4 0x53fa857c 0x300040 -DATA 4 0x53fa8564 0x300040 -DATA 4 0x53fa8580 0x300040 -DATA 4 0x53fa8570 0x300220 -DATA 4 0x53fa8578 0x300220 -DATA 4 0x53fa872c 0x300000 -DATA 4 0x53fa8728 0x300000 -DATA 4 0x53fa871c 0x300000 -DATA 4 0x53fa8718 0x300000 -DATA 4 0x53fa8574 0x300020 -DATA 4 0x53fa8588 0x300020 -DATA 4 0x53fa855c 0x0 -DATA 4 0x53fa858c 0x0 -DATA 4 0x53fa856c 0x300040 -DATA 4 0x53fa86f0 0x300000 -DATA 4 0x53fa8720 0x300000 -DATA 4 0x53fa86fc 0x0 -DATA 4 0x53fa86f4 0x0 -DATA 4 0x53fa8714 0x0 -DATA 4 0x53fa8724 0x4000000 - -/* DDR RAM */ -DATA 4 0x63fd9088 0x40404040 -DATA 4 0x63fd9090 0x40404040 -DATA 4 0x63fd907C 0x01420143 -DATA 4 0x63fd9080 0x01450146 -DATA 4 0x63fd9018 0x00111740 -DATA 4 0x63fd9000 0x84190000 - -/* esdcfgX */ -DATA 4 0x63fd900C 0x9f5152e3 -DATA 4 0x63fd9010 0xb68e8a63 -DATA 4 0x63fd9014 0x01ff00db - -/* Read/Write command delay */ -DATA 4 0x63fd902c 0x000026d2 - -/* Out of reset delays */ -DATA 4 0x63fd9030 0x00ff0e21 - -/* ESDCTL ODT timing control */ -DATA 4 0x63fd9008 0x12273030 - -/* ESDCTL power down control */ -DATA 4 0x63fd9004 0x0002002d - -/* Set registers in DDR memory chips */ -DATA 4 0x63fd901c 0x00008032 -DATA 4 0x63fd901c 0x00008033 -DATA 4 0x63fd901c 0x00028031 -DATA 4 0x63fd901c 0x052080b0 -DATA 4 0x63fd901c 0x04008040 - -/* ESDCTL refresh control */ -DATA 4 0x63fd9020 0x00005800 - -/* PHY ZQ HW control */ -DATA 4 0x63fd9040 0x05380003 - -/* PHY ODT control */ -DATA 4 0x63fd9058 0x00022222 - -/* start DDR3 */ -DATA 4 0x63fd901c 0x00000000 diff --git a/configs/ima3-mx53_defconfig b/configs/ima3-mx53_defconfig deleted file mode 100644 index 1f5e3a6..0000000 --- a/configs/ima3-mx53_defconfig +++ /dev/null @@ -1,6 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_IMA3_MX53=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/esg/ima3-mx53/imximage.cfg" -# CONFIG_CMD_SETEXPR is not set -CONFIG_SPI_FLASH=y -CONFIG_SYS_PROMPT="IMA3 MX53 U-Boot > " diff --git a/include/configs/ima3-mx53.h b/include/configs/ima3-mx53.h deleted file mode 100644 index 2fa6c3d..0000000 --- a/include/configs/ima3-mx53.h +++ /dev/null @@ -1,238 +0,0 @@ -/* - * (C) Copyright 2012, Stefano Babic - * - * Copyright (C) 2010 Freescale Semiconductor, Inc. - * - * Configuration settings for the MX53-EVK Freescale board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* SOC type must be included before imx-regs.h */ -#define CONFIG_MX53 -#include - -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -#define CONFIG_OF_LIBFDT - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) - -#define CONFIG_BOARD_EARLY_INIT_F - -/* Enable GPIOs */ -#define CONFIG_MXC_GPIO - -/* UART */ -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART4_BASE_ADDR - -/* MMC */ -#define CONFIG_FSL_ESDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_FSL_ESDHC_NUM 1 - -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_DOS_PARTITION - -/* Ethernet on FEC */ -#define CONFIG_MII - -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE FEC_BASE_ADDR -#define CONFIG_FEC_MXC_PHYADDR 0x01 -#define CONFIG_PHY_ADDR CONFIG_FEC_MXC_PHYADDR -#define CONFIG_RESET_PHY_R -#define CONFIG_FEC_MXC_NO_ANEG -#define CONFIG_ETHPRIME "FEC0" - -/* SPI */ -#define CONFIG_HARD_SPI -#define CONFIG_MXC_SPI -#define CONFIG_DEFAULT_SPI_BUS 1 -#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0 - -/* SPI FLASH - not used for environment */ -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 -#define CONFIG_SF_DEFAULT_SPEED 25000000 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* Command definition */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF -#define CONFIG_CMD_GPIO - -#define CONFIG_BOOTDELAY 3 - -#define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */ -#define CONFIG_SYS_TEXT_BASE 0xf0001400 /* uboot in nor flash */ - -#define CONFIG_ARP_TIMEOUT 200UL - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x70000000 -#define CONFIG_SYS_MEMTEST_END 0x10000 - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -#define CONFIG_CMDLINE_EDITING - -/* Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 CSD0_BASE_ADDR -#define PHYS_SDRAM_1_SIZE (1024 * 1024 * 1024) - -#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1) -#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) -#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define MTDIDS_DEFAULT "nor0=f0000000.flash" - -/* FLASH and environment organization */ - -#define CONFIG_SYS_FLASH_BASE 0xF0000000 -#define CONFIG_SYS_FLASH_CFI /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER /* Use the common driver */ -#define CONFIG_FLASH_CFI_MTD /* with MTD support */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 1024 - -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) - -#define CONFIG_ENV_SIZE (8 * 1024) -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ - CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -/* - * Default environment and default scripts - * to update uboot and load kernel - */ - -#define HOSTNAME ima3-mx53 - -#define CONFIG_HOSTNAME ima3-mx53 -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram0 rw\0" \ - "addip_sta=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ - "addip=if test -n ${ipdyn};then run addip_dyn;" \ - "else run addip_sta;fi\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addtty=setenv bootargs ${bootargs}" \ - " console=${console},${baudrate}\0" \ - "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ - "console=ttymxc3\0" \ - "loadaddr=70800000\0" \ - "kernel_addr_r=70800000\0" \ - "ramdisk_addr_r=71000000\0" \ - "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \ - "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \ - "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \ - "mmcargs=setenv bootargs root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "mmcroot=/dev/mmcblk0p3 rw\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs addip addtty addmtd addmisc mmcload;" \ - "bootm\0" \ - "mmcload=fatload mmc ${mmcdev}:${mmcpart} " \ - "${loadaddr} ${uimage}\0" \ - "mmcrootfstype=ext3 rootwait\0" \ - "flash_self=run ramargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ - "run nfsargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr_r}\0" \ - "net_self_load=tftp ${ramdisk_addr_r} ${ramdisk_file};" \ - "tftp ${kernel_addr_r} ${bootfile}\0" \ - "net_self=if run net_self_load;then " \ - "run ramargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr_r} ${ramdisk_addr_r};" \ - "else echo Images not loades;fi\0" \ - "satargs=setenv bootargs root=/dev/sda1\0" \ - "satafile=boot/uImage\0" \ - "ssdboot=echo Booting from ssd ...; " \ - "run satargs addip addtty addmtd addmisc;" \ - "sata init;ext2load sata 0:1 ${kernel_addr_r} " \ - "${satafile};bootm\0" \ - "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.imx\0" \ - "uimage=uImage\0" \ - "load=tftp ${loadaddr} ${u-boot}\0" \ - "uboot_addr=0xf0001000\0" \ - "update=protect off 0xf0000000 +60000;" \ - "erase ${uboot_addr} +60000;" \ - "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \ - "upd=if run load;then echo Updating u-boot;if run update;" \ - "then echo U-Boot updated;" \ - "else echo Error updating u-boot !;" \ - "echo Board without bootloader !!;" \ - "fi;" \ - "else echo U-Boot not downloaded..exiting;fi\0" \ - "bootcmd=run net_nfs\0" - - -#define CONFIG_CMD_SATA -#ifdef CONFIG_CMD_SATA - #define CONFIG_DWC_AHSATA - #define CONFIG_SYS_SATA_MAX_DEVICE 1 - #define CONFIG_DWC_AHSATA_PORT_ID 0 - #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR - #define CONFIG_LBA48 - #define CONFIG_LIBATA -#endif - -#endif /* __CONFIG_H */ -- cgit v0.10.2