From 2b71d098eefbd396771d19bc18c4ec36142976fa Mon Sep 17 00:00:00 2001 From: Andy Yan Date: Mon, 24 Jul 2017 17:47:27 +0800 Subject: powerpc: spl: configure SYS_MALLOC_F_LEN independently for SPL and full U-Boot Some platforms have very limited SRAM to run SPL code, so there may not be the same amount space for a malloc pool before relocation in the SPL stage as the normal U-Boot stage. Make SPL and (the full) U-Boot stage use independent SYS_MALLOC_F_LEN, so the size of pre-relocation malloc pool can be configured memory space independently. Signed-off-by: Andy Yan Acked-by: Philipp Tomsich Reviewed-by: Philipp Tomsich [fixed up commit-message:] Signed-off-by: Philipp Tomsich diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S index d99ae27..d2fced8a 100644 --- a/arch/powerpc/cpu/mpc83xx/start.S +++ b/arch/powerpc/cpu/mpc83xx/start.S @@ -264,14 +264,14 @@ in_flash: cmplw r3, r4 bne 1b -#ifdef CONFIG_SYS_MALLOC_F_LEN +#if CONFIG_VAL(SYS_MALLOC_F_LEN) -#if CONFIG_SYS_MALLOC_F_LEN + GENERATED_GBL_DATA_SIZE > CONFIG_SYS_INIT_RAM_SIZE -#error "CONFIG_SYS_MALLOC_F_LEN too large to fit into initial RAM." +#if CONFIG_VAL(SYS_MALLOC_F_LEN) + GENERATED_GBL_DATA_SIZE > CONFIG_SYS_INIT_RAM_SIZE +#error "SYS_MALLOC_F_LEN too large to fit into initial RAM." #endif /* r3 = new stack pointer / pre-reloc malloc area */ - subi r3, r3, CONFIG_SYS_MALLOC_F_LEN + subi r3, r3, CONFIG_VAL(SYS_MALLOC_F_LEN) /* Set pointer to pre-reloc malloc area in GD */ stw r3, GD_MALLOC_BASE(r4) diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index f03e1a0..0f016f0 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -1183,14 +1183,13 @@ _start_cont: lis r3,(CONFIG_SYS_INIT_RAM_ADDR)@h ori r3,r3,((CONFIG_SYS_INIT_SP_OFFSET-16)&~0xf)@l /* Align to 16 */ -#ifdef CONFIG_SYS_MALLOC_F_LEN - -#if CONFIG_SYS_MALLOC_F_LEN + GENERATED_GBL_DATA_SIZE > CONFIG_SYS_INIT_RAM_SIZE -#error "CONFIG_SYS_MALLOC_F_LEN too large to fit into initial RAM." +#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_VAL(SYS_MALLOC_F_LEN) + GENERATED_GBL_DATA_SIZE > CONFIG_SYS_INIT_RAM_SIZE +#error "SYS_MALLOC_F_LEN too large to fit into initial RAM." #endif /* Leave 16+ byte for back chain termination and NULL return address */ - subi r3,r3,((CONFIG_SYS_MALLOC_F_LEN+16+15)&~0xf) + subi r3,r3,((CONFIG_VAL(SYS_MALLOC_F_LEN)+16+15)&~0xf) #endif /* End of RAM */ @@ -1204,7 +1203,7 @@ _start_cont: cmplw r4,r3 bne 1b -#ifdef CONFIG_SYS_MALLOC_F_LEN +#if CONFIG_VAL(SYS_MALLOC_F_LEN) lis r4,(CONFIG_SYS_INIT_RAM_ADDR)@h ori r4,r4,(CONFIG_SYS_GBL_DATA_OFFSET)@l -- cgit v0.10.2