From 3484d953073cae069b8c41a63a9955e551117f01 Mon Sep 17 00:00:00 2001 From: Prabhakar Kushwaha Date: Thu, 28 May 2015 14:53:54 +0530 Subject: armv8/ls2085ardb: Add eth & phy firmware loading support Add support for board eth initialization and support for loading phy firmware. PHY firmware needs to be loaded from board_eth_init() because all the MACs are not initialized by ldpaa_eth driver. Signed-off-by: pankaj chauhan Signed-off-by: Prabhakar Kushwaha Reviewed-by: York Sun diff --git a/board/freescale/ls2085ardb/Makefile b/board/freescale/ls2085ardb/Makefile index 0bfe21c..de383cc 100644 --- a/board/freescale/ls2085ardb/Makefile +++ b/board/freescale/ls2085ardb/Makefile @@ -4,5 +4,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y += ls2085ardb.o +obj-y += ls2085ardb.o eth_ls2085rdb.o obj-y += ddr.o diff --git a/board/freescale/ls2085ardb/eth_ls2085rdb.c b/board/freescale/ls2085ardb/eth_ls2085rdb.c new file mode 100644 index 0000000..60af079 --- /dev/null +++ b/board/freescale/ls2085ardb/eth_ls2085rdb.c @@ -0,0 +1,133 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +int load_firmware_cortina(struct phy_device *phy_dev) +{ + if (phy_dev->drv->config) + return phy_dev->drv->config(phy_dev); + + return 0; +} + +void load_phy_firmware(void) +{ + int i; + u8 phy_addr; + struct phy_device *phy_dev; + struct mii_dev *dev; + phy_interface_t interface; + + /*Initialize and upload firmware for all the PHYs*/ + for (i = WRIOP1_DPMAC1; i <= WRIOP1_DPMAC8; i++) { + interface = wriop_get_enet_if(i); + if (interface == PHY_INTERFACE_MODE_XGMII) { + dev = wriop_get_mdio(i); + phy_addr = wriop_get_phy_address(i); + phy_dev = phy_find_by_mask(dev, 1 << phy_addr, + interface); + if (!phy_dev) { + printf("No phydev for phyaddr %d\n", phy_addr); + continue; + } + + /*Flash firmware for All CS4340 PHYS */ + if (phy_dev->phy_id == PHY_UID_CS4340) + load_firmware_cortina(phy_dev); + } + } +} + +int board_eth_init(bd_t *bis) +{ +#if defined(CONFIG_FSL_MC_ENET) + int i, interface; + struct memac_mdio_info mdio_info; + struct mii_dev *dev; + struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + u32 srds_s1; + struct memac_mdio_controller *reg; + + srds_s1 = in_le32(&gur->rcwsr[28]) & + FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK; + srds_s1 >>= FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT; + + reg = (struct memac_mdio_controller *)CONFIG_SYS_FSL_WRIOP1_MDIO1; + mdio_info.regs = reg; + mdio_info.name = DEFAULT_WRIOP_MDIO1_NAME; + + /* Register the EMI 1 */ + fm_memac_mdio_init(bis, &mdio_info); + + reg = (struct memac_mdio_controller *)CONFIG_SYS_FSL_WRIOP1_MDIO2; + mdio_info.regs = reg; + mdio_info.name = DEFAULT_WRIOP_MDIO2_NAME; + + /* Register the EMI 2 */ + fm_memac_mdio_init(bis, &mdio_info); + + switch (srds_s1) { + case 0x2A: + wriop_set_phy_address(WRIOP1_DPMAC1, CORTINA_PHY_ADDR1); + wriop_set_phy_address(WRIOP1_DPMAC2, CORTINA_PHY_ADDR2); + wriop_set_phy_address(WRIOP1_DPMAC3, CORTINA_PHY_ADDR3); + wriop_set_phy_address(WRIOP1_DPMAC4, CORTINA_PHY_ADDR4); + wriop_set_phy_address(WRIOP1_DPMAC5, AQ_PHY_ADDR1); + wriop_set_phy_address(WRIOP1_DPMAC6, AQ_PHY_ADDR2); + wriop_set_phy_address(WRIOP1_DPMAC7, AQ_PHY_ADDR3); + wriop_set_phy_address(WRIOP1_DPMAC8, AQ_PHY_ADDR4); + + break; + default: + printf("SerDes1 protocol 0x%x is not supported on LS2085aRDB\n", + srds_s1); + break; + } + + for (i = WRIOP1_DPMAC1; i <= WRIOP1_DPMAC4; i++) { + interface = wriop_get_enet_if(i); + switch (interface) { + case PHY_INTERFACE_MODE_XGMII: + dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME); + wriop_set_mdio(i, dev); + break; + default: + break; + } + } + + for (i = WRIOP1_DPMAC5; i <= WRIOP1_DPMAC8; i++) { + switch (wriop_get_enet_if(i)) { + case PHY_INTERFACE_MODE_XGMII: + dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME); + wriop_set_mdio(i, dev); + break; + default: + break; + } + } + + /* Load CORTINA CS4340 PHY firmware */ + load_phy_firmware(); + + cpu_eth_init(bis); +#endif /* CONFIG_FMAN_ENET */ + + return pci_eth_init(bis); +} diff --git a/board/freescale/ls2085ardb/ls2085ardb.c b/board/freescale/ls2085ardb/ls2085ardb.c index d05f2bc..6cb7b13 100644 --- a/board/freescale/ls2085ardb/ls2085ardb.c +++ b/board/freescale/ls2085ardb/ls2085ardb.c @@ -176,19 +176,6 @@ unsigned long get_dram_size_to_hide(void) return dram_to_hide; } -int board_eth_init(bd_t *bis) -{ - int error = 0; - -#ifdef CONFIG_FSL_MC_ENET - error = cpu_eth_init(bis); -#endif - - error = pci_eth_init(bis); - - return error; -} - #ifdef CONFIG_FSL_MC_ENET void fdt_fixup_board_enet(void *fdt) { diff --git a/include/configs/ls2085ardb.h b/include/configs/ls2085ardb.h index 600261e..920560c 100644 --- a/include/configs/ls2085ardb.h +++ b/include/configs/ls2085ardb.h @@ -298,4 +298,27 @@ unsigned long get_board_sys_clk(void); "kernel_load=0xa0000000\0" \ "kernel_size=0x1000000\0" +/* MAC/PHY configuration */ +#ifdef CONFIG_FSL_MC_ENET +#define CONFIG_PHYLIB_10G +#define CONFIG_PHY_CORTINA +#define CONFIG_PHYLIB +#define CONFIG_SYS_CORTINA_FW_IN_NOR +#define CONFIG_CORTINA_FW_ADDR 0x581000000 +#define CONFIG_CORTINA_FW_LENGTH 0x40000 + +#define CORTINA_PHY_ADDR1 0x10 +#define CORTINA_PHY_ADDR2 0x11 +#define CORTINA_PHY_ADDR3 0x12 +#define CORTINA_PHY_ADDR4 0x13 +#define AQ_PHY_ADDR1 0x00 +#define AQ_PHY_ADDR2 0x01 +#define AQ_PHY_ADDR3 0x02 +#define AQ_PHY_ADDR4 0x03 + +#define CONFIG_MII +#define CONFIG_ETHPRIME "DPNI1" +#define CONFIG_PHY_GIGE +#endif + #endif /* __LS2_RDB_H */ -- cgit v0.10.2