From e1d8ed2c08da14b168658cc5fa78529d461aea70 Mon Sep 17 00:00:00 2001 From: Poonam Aggrwal Date: Mon, 14 Jan 2008 09:41:14 +0530 Subject: Changes in uboot DDR configuration for MPC8313eRDB These changes were identified by HighSmith Bill ,Mazzyar and Joseph for DDR configuration in u-boot code. Some are related to performance, some affect stability and some correct few basic errors in the current configuration. The changes have been tested and found to give better memory latency figures on MPC8313eRDB.LMBench figures prove it. The changes are: - CS0_CONFIG[ AP_n_EN] is changed from 1 to 0 (this may improve performance for application with many read or write to open pages). - CS0_CONFIG[ODT_WR_CFG] is currently changed from 100 to 001 (activating all the CS when only one is used may cause unwanted noise on the system) - TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 8clks (based on Tras=45ns) - TIMING_CFG_1[REFREC] changed from 21 clks to 18clks. - TIMING_CFG_2[AL] value changed from 0 setting to 1 clk to comply with the 3 ODT clk requirements) - TIMING_CFG_2[CPO] was set to a reserved value, changed to RL+3/4. - TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 6clks. - DDR_SDRAM_MODE[AL]changed from 0 to 1. - DDR_SDRAM_MODE[WRREC] changed from 1 clk to 3 clks. - DDR_SDRAM_INTERVAL[REFINT] is changed from 0x0320 to 0x0510. - DDR_SDRAM_INTERVAL[BSTOPRE] is changed from 0x64 to 0x0500. The patch is based of git://www.denx.de/git/u-boot-mpc83xx.git The last commit on this tree was 6775c68683a53c7abc778774641aac6f833a2cbf Signed-off-by: Poonam Aggrwal-b10812 Cc: Bill HighSmith Cc: Razzaz Mazyar Cc: Josep P J Signed-off-by: Kim Phillips diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 455bbe0..f12a3e6 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -76,10 +76,10 @@ * seem to have the SPD connected to I2C. */ #define CFG_DDR_SIZE 128 /* MB */ -#define CFG_DDR_CONFIG ( CSCONFIG_EN | CSCONFIG_AP \ - | 0x00040000 /* TODO */ \ +#define CFG_DDR_CONFIG ( CSCONFIG_EN \ + | 0x00010000 /* TODO */ \ | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10 ) - /* 0x80840102 */ + /* 0x80010102 */ #define CFG_DDR_TIMING_3 0x00000000 #define CFG_DDR_TIMING_0 ( ( 0 << TIMING_CFG0_RWT_SHIFT ) \ @@ -92,25 +92,25 @@ | ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) ) /* 0x00220802 */ #define CFG_DDR_TIMING_1 ( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \ - | ( 9 << TIMING_CFG1_ACTTOPRE_SHIFT ) \ + | ( 8 << TIMING_CFG1_ACTTOPRE_SHIFT ) \ | ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \ | ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \ - | (13 << TIMING_CFG1_REFREC_SHIFT ) \ + | (10 << TIMING_CFG1_REFREC_SHIFT ) \ | ( 3 << TIMING_CFG1_WRREC_SHIFT ) \ | ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \ | ( 2 << TIMING_CFG1_WRTORD_SHIFT ) ) - /* 0x3935d322 */ -#define CFG_DDR_TIMING_2 ( ( 0 << TIMING_CFG2_ADD_LAT_SHIFT ) \ - | (31 << TIMING_CFG2_CPO_SHIFT ) \ + /* 0x3835a322 */ +#define CFG_DDR_TIMING_2 ( ( 1 << TIMING_CFG2_ADD_LAT_SHIFT ) \ + | ( 5 << TIMING_CFG2_CPO_SHIFT ) \ | ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \ | ( 2 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \ | ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \ | ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \ - | (10 << TIMING_CFG2_FOUR_ACT_SHIFT) ) - /* 0x0f9048ca */ /* P9-45,may need tuning */ -#define CFG_DDR_INTERVAL ( ( 800 << SDRAM_INTERVAL_REFINT_SHIFT ) \ - | ( 100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) ) - /* 0x03200064 */ + | ( 6 << TIMING_CFG2_FOUR_ACT_SHIFT) ) + /* 0x129048c6 */ /* P9-45,may need tuning */ +#define CFG_DDR_INTERVAL ( ( 1296 << SDRAM_INTERVAL_REFINT_SHIFT ) \ + | ( 1280 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) ) + /* 0x05100500 */ #if defined(CONFIG_DDR_2T_TIMING) #define CFG_SDRAM_CFG ( SDRAM_CFG_SREN \ | SDRAM_CFG_SDRAM_TYPE_DDR2 \ @@ -124,9 +124,9 @@ #endif #define CFG_SDRAM_CFG2 0x00401000; /* set burst length to 8 for 32-bit data path */ -#define CFG_DDR_MODE ( ( 0x4440 << SDRAM_MODE_ESD_SHIFT ) \ - | ( 0x0232 << SDRAM_MODE_SD_SHIFT ) ) - /* 0x44400232 */ +#define CFG_DDR_MODE ( ( 0x4448 << SDRAM_MODE_ESD_SHIFT ) \ + | ( 0x0632 << SDRAM_MODE_SD_SHIFT ) ) + /* 0x44480632 */ #define CFG_DDR_MODE_2 0x8000C000; #define CFG_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 -- cgit v0.10.2