From ef3cc8112c7ac58d621246523e8c84bf6035b53b Mon Sep 17 00:00:00 2001 From: Thomas Chou Date: Mon, 25 Aug 2014 15:57:06 +0800 Subject: nios2: remove epled driver The epled driver was replaced by altera_pio and gpio_led. Signed-off-by: Thomas Chou diff --git a/board/altera/common/epled.c b/board/altera/common/epled.c deleted file mode 100644 index 580d590..0000000 --- a/board/altera/common/epled.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * (C) Copyright 2004, Psyent Corporation - * Scott McNutt - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -/* The LED port is configured as output only, so we - * must track the state manually. - */ -static led_id_t val = 0; - -void __led_init (led_id_t mask, int state) -{ - nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR; - - if (state == STATUS_LED_ON) - val &= ~mask; - else - val |= mask; - writel (val, &pio->data); -} - -void __led_set (led_id_t mask, int state) -{ - nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR; - - if (state == STATUS_LED_ON) - val &= ~mask; - else - val |= mask; - writel (val, &pio->data); -} - -void __led_toggle (led_id_t mask) -{ - nios_pio_t *pio = (nios_pio_t *)CONFIG_SYS_LEDPIO_ADDR; - - val ^= mask; - writel (val, &pio->data); -} diff --git a/board/altera/nios2-generic/Makefile b/board/altera/nios2-generic/Makefile index aa362b3..d3c5b43 100644 --- a/board/altera/nios2-generic/Makefile +++ b/board/altera/nios2-generic/Makefile @@ -8,5 +8,4 @@ obj-y := nios2-generic.o obj-$(CONFIG_CMD_IDE) += ../common/cfide.o -obj-$(CONFIG_EPLED) += ../common/epled.o obj-y += text_base.o -- cgit v0.10.2 From 8645071006a0b577ae4660f4a271f42c081ef4ab Mon Sep 17 00:00:00 2001 From: Thomas Chou Date: Mon, 25 Aug 2014 16:50:14 +0800 Subject: nios2: divide nios2-io.h into each specific drivers and remove it The nios2-io.h defines hardware registers and bits of several FPGA IP cores. It could be divided in to the specific drivers, including altera timer, altera sysid, altera uart and altera jtag uart. The altera pio and altera spi drivers use their own hardware definitions. The removal of nios2-io.h will help modularity and maintenance. Signed-off-by: Thomas Chou diff --git a/arch/nios2/cpu/cpu.c b/arch/nios2/cpu/cpu.c index 86f94b7..36ea90b 100644 --- a/arch/nios2/cpu/cpu.c +++ b/arch/nios2/cpu/cpu.c @@ -7,7 +7,6 @@ #include #include -#include #include DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/nios2/cpu/interrupts.c b/arch/nios2/cpu/interrupts.c index c4bed22..b363a1f 100644 --- a/arch/nios2/cpu/interrupts.c +++ b/arch/nios2/cpu/interrupts.c @@ -10,7 +10,6 @@ #include -#include #include #include #include @@ -21,6 +20,25 @@ #include #endif +typedef volatile struct { + unsigned status; /* Timer status reg */ + unsigned control; /* Timer control reg */ + unsigned periodl; /* Timeout period low */ + unsigned periodh; /* Timeout period high */ + unsigned snapl; /* Snapshot low */ + unsigned snaph; /* Snapshot high */ +} nios_timer_t; + +/* status register */ +#define NIOS_TIMER_TO (1 << 0) /* Timeout */ +#define NIOS_TIMER_RUN (1 << 1) /* Timer running */ + +/* control register */ +#define NIOS_TIMER_ITO (1 << 0) /* Timeout int ena */ +#define NIOS_TIMER_CONT (1 << 1) /* Continuous mode */ +#define NIOS_TIMER_START (1 << 2) /* Start timer */ +#define NIOS_TIMER_STOP (1 << 3) /* Stop timer */ + #if defined(CONFIG_SYS_NIOS_TMRBASE) && !defined(CONFIG_SYS_NIOS_TMRIRQ) #error CONFIG_SYS_NIOS_TMRIRQ not defined (see documentation) #endif diff --git a/arch/nios2/cpu/sysid.c b/arch/nios2/cpu/sysid.c index 943bff8..50819b2 100644 --- a/arch/nios2/cpu/sysid.c +++ b/arch/nios2/cpu/sysid.c @@ -11,12 +11,16 @@ #include #include -#include #include +typedef volatile struct { + unsigned id; /* The system build id */ + unsigned timestamp; /* Timestamp */ +} nios_sysid_t; + void display_sysid (void) { - struct nios_sysid_t *sysid = (struct nios_sysid_t *)CONFIG_SYS_NIOS_SYSID_BASE; + nios_sysid_t *sysid = (nios_sysid_t *)CONFIG_SYS_NIOS_SYSID_BASE; struct tm t; char asc[32]; time_t stamp; diff --git a/drivers/serial/altera_jtag_uart.c b/drivers/serial/altera_jtag_uart.c index 0573c7a..9a81402 100644 --- a/drivers/serial/altera_jtag_uart.c +++ b/drivers/serial/altera_jtag_uart.c @@ -8,10 +8,28 @@ #include #include #include -#include #include #include +typedef volatile struct { + unsigned data; /* Data register */ + unsigned control; /* Control register */ +} nios_jtag_t; + +/* data register */ +#define NIOS_JTAG_RVALID (1<<15) /* Read valid */ +#define NIOS_JTAG_DATA(d) ((d)&0x0ff) /* Read data */ +#define NIOS_JTAG_RAVAIL(d) ((d)>>16) /* Read space avail */ + +/* control register */ +#define NIOS_JTAG_RE (1 << 0) /* read intr enable */ +#define NIOS_JTAG_WE (1 << 1) /* write intr enable */ +#define NIOS_JTAG_RI (1 << 8) /* read intr pending */ +#define NIOS_JTAG_WI (1 << 9) /* write intr pending*/ +#define NIOS_JTAG_AC (1 << 10) /* activity indicator */ +#define NIOS_JTAG_RRDY (1 << 12) /* read available */ +#define NIOS_JTAG_WSPACE(d) ((d)>>16) /* Write space avail */ + DECLARE_GLOBAL_DATA_PTR; /*------------------------------------------------------------------ diff --git a/drivers/serial/altera_uart.c b/drivers/serial/altera_uart.c index d620528..d6b1484 100644 --- a/drivers/serial/altera_uart.c +++ b/drivers/serial/altera_uart.c @@ -9,10 +9,47 @@ #include #include #include -#include #include #include +typedef volatile struct { + unsigned rxdata; /* Rx data reg */ + unsigned txdata; /* Tx data reg */ + unsigned status; /* Status reg */ + unsigned control; /* Control reg */ + unsigned divisor; /* Baud rate divisor reg */ + unsigned endofpacket; /* End-of-packet reg */ +} nios_uart_t; + +/* status register */ +#define NIOS_UART_PE (1 << 0) /* parity error */ +#define NIOS_UART_FE (1 << 1) /* frame error */ +#define NIOS_UART_BRK (1 << 2) /* break detect */ +#define NIOS_UART_ROE (1 << 3) /* rx overrun */ +#define NIOS_UART_TOE (1 << 4) /* tx overrun */ +#define NIOS_UART_TMT (1 << 5) /* tx empty */ +#define NIOS_UART_TRDY (1 << 6) /* tx ready */ +#define NIOS_UART_RRDY (1 << 7) /* rx ready */ +#define NIOS_UART_E (1 << 8) /* exception */ +#define NIOS_UART_DCTS (1 << 10) /* cts change */ +#define NIOS_UART_CTS (1 << 11) /* cts */ +#define NIOS_UART_EOP (1 << 12) /* eop detected */ + +/* control register */ +#define NIOS_UART_IPE (1 << 0) /* parity error int ena*/ +#define NIOS_UART_IFE (1 << 1) /* frame error int ena */ +#define NIOS_UART_IBRK (1 << 2) /* break detect int ena */ +#define NIOS_UART_IROE (1 << 3) /* rx overrun int ena */ +#define NIOS_UART_ITOE (1 << 4) /* tx overrun int ena */ +#define NIOS_UART_ITMT (1 << 5) /* tx empty int ena */ +#define NIOS_UART_ITRDY (1 << 6) /* tx ready int ena */ +#define NIOS_UART_IRRDY (1 << 7) /* rx ready int ena */ +#define NIOS_UART_IE (1 << 8) /* exception int ena */ +#define NIOS_UART_TBRK (1 << 9) /* transmit break */ +#define NIOS_UART_IDCTS (1 << 10) /* cts change int ena */ +#define NIOS_UART_RTS (1 << 11) /* rts */ +#define NIOS_UART_IEOP (1 << 12) /* eop detected int ena */ + DECLARE_GLOBAL_DATA_PTR; /*------------------------------------------------------------------ diff --git a/include/nios2-io.h b/include/nios2-io.h deleted file mode 100644 index 6f1ae50..0000000 --- a/include/nios2-io.h +++ /dev/null @@ -1,153 +0,0 @@ -/* - * (C) Copyright 2004, Psyent Corporation - * Scott McNutt - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/************************************************************************* - * Altera Nios2 Standard Peripherals - ************************************************************************/ - -#ifndef __NIOS2IO_H__ -#define __NIOS2IO_H__ - -/*------------------------------------------------------------------------ - * UART (http://www.altera.com/literature/ds/ds_nios_uart.pdf) - *----------------------------------------------------------------------*/ -typedef volatile struct nios_uart_t { - unsigned rxdata; /* Rx data reg */ - unsigned txdata; /* Tx data reg */ - unsigned status; /* Status reg */ - unsigned control; /* Control reg */ - unsigned divisor; /* Baud rate divisor reg */ - unsigned endofpacket; /* End-of-packet reg */ -}nios_uart_t; - -/* status register */ -#define NIOS_UART_PE (1 << 0) /* parity error */ -#define NIOS_UART_FE (1 << 1) /* frame error */ -#define NIOS_UART_BRK (1 << 2) /* break detect */ -#define NIOS_UART_ROE (1 << 3) /* rx overrun */ -#define NIOS_UART_TOE (1 << 4) /* tx overrun */ -#define NIOS_UART_TMT (1 << 5) /* tx empty */ -#define NIOS_UART_TRDY (1 << 6) /* tx ready */ -#define NIOS_UART_RRDY (1 << 7) /* rx ready */ -#define NIOS_UART_E (1 << 8) /* exception */ -#define NIOS_UART_DCTS (1 << 10) /* cts change */ -#define NIOS_UART_CTS (1 << 11) /* cts */ -#define NIOS_UART_EOP (1 << 12) /* eop detected */ - -/* control register */ -#define NIOS_UART_IPE (1 << 0) /* parity error int ena*/ -#define NIOS_UART_IFE (1 << 1) /* frame error int ena */ -#define NIOS_UART_IBRK (1 << 2) /* break detect int ena */ -#define NIOS_UART_IROE (1 << 3) /* rx overrun int ena */ -#define NIOS_UART_ITOE (1 << 4) /* tx overrun int ena */ -#define NIOS_UART_ITMT (1 << 5) /* tx empty int ena */ -#define NIOS_UART_ITRDY (1 << 6) /* tx ready int ena */ -#define NIOS_UART_IRRDY (1 << 7) /* rx ready int ena */ -#define NIOS_UART_IE (1 << 8) /* exception int ena */ -#define NIOS_UART_TBRK (1 << 9) /* transmit break */ -#define NIOS_UART_IDCTS (1 << 10) /* cts change int ena */ -#define NIOS_UART_RTS (1 << 11) /* rts */ -#define NIOS_UART_IEOP (1 << 12) /* eop detected int ena */ - - -/*------------------------------------------------------------------------ - * TIMER (http://www.altera.com/literature/ds/ds_nios_timer.pdf) - *----------------------------------------------------------------------*/ -typedef volatile struct nios_timer_t { - unsigned status; /* Timer status reg */ - unsigned control; /* Timer control reg */ - unsigned periodl; /* Timeout period low */ - unsigned periodh; /* Timeout period high */ - unsigned snapl; /* Snapshot low */ - unsigned snaph; /* Snapshot high */ -}nios_timer_t; - -/* status register */ -#define NIOS_TIMER_TO (1 << 0) /* Timeout */ -#define NIOS_TIMER_RUN (1 << 1) /* Timer running */ - -/* control register */ -#define NIOS_TIMER_ITO (1 << 0) /* Timeout int ena */ -#define NIOS_TIMER_CONT (1 << 1) /* Continuous mode */ -#define NIOS_TIMER_START (1 << 2) /* Start timer */ -#define NIOS_TIMER_STOP (1 << 3) /* Stop timer */ - - -/*------------------------------------------------------------------------ - * PIO (http://www.altera.com/literature/ds/ds_nios_pio.pdf) - *----------------------------------------------------------------------*/ -typedef volatile struct nios_pio_t { - unsigned int data; /* Data value at each PIO in/out */ - unsigned int direction; /* Data direct. for each PIO bit */ - unsigned int interruptmask; /* Per-bit IRQ enable/disable */ - unsigned int edgecapture; /* Per-bit sync. edge detect & hold */ -}nios_pio_t; - -/* direction register */ -#define NIOS_PIO_OUT (1) /* PIO bit is output */ -#define NIOS_PIO_IN (0) /* PIO bit is input */ - - -/*------------------------------------------------------------------------ - * SPI (http://www.altera.com/literature/ds/ds_nios_spi.pdf) - *----------------------------------------------------------------------*/ -typedef volatile struct nios_spi_t { - unsigned rxdata; /* Rx data reg */ - unsigned txdata; /* Tx data reg */ - unsigned status; /* Status reg */ - unsigned control; /* Control reg */ - unsigned reserved; /* (master only) */ - unsigned slaveselect; /* SPI slave select mask (master only) */ -}nios_spi_t; - -/* status register */ -#define NIOS_SPI_ROE (1 << 3) /* rx overrun */ -#define NIOS_SPI_TOE (1 << 4) /* tx overrun */ -#define NIOS_SPI_TMT (1 << 5) /* tx empty */ -#define NIOS_SPI_TRDY (1 << 6) /* tx ready */ -#define NIOS_SPI_RRDY (1 << 7) /* rx ready */ -#define NIOS_SPI_E (1 << 8) /* exception */ - -/* control register */ -#define NIOS_SPI_IROE (1 << 3) /* rx overrun int ena */ -#define NIOS_SPI_ITOE (1 << 4) /* tx overrun int ena */ -#define NIOS_SPI_ITRDY (1 << 6) /* tx ready int ena */ -#define NIOS_SPI_IRRDY (1 << 7) /* rx ready int ena */ -#define NIOS_SPI_IE (1 << 8) /* exception int ena */ -#define NIOS_SPI_SSO (1 << 10) /* override SS_n output */ - -/*------------------------------------------------------------------------ - * JTAG UART - *----------------------------------------------------------------------*/ -typedef volatile struct nios_jtag_t { - unsigned data; /* Data register */ - unsigned control; /* Control register */ -}nios_jtag_t; - -/* data register */ -#define NIOS_JTAG_RVALID (1<<15) /* Read valid */ -#define NIOS_JTAG_DATA(d) ((d)&0x0ff) /* Read data */ -#define NIOS_JTAG_RAVAIL(d) ((d)>>16) /* Read space avail */ - -/* control register */ -#define NIOS_JTAG_RE (1 << 0) /* read intr enable */ -#define NIOS_JTAG_WE (1 << 1) /* write intr enable */ -#define NIOS_JTAG_RI (1 << 8) /* read intr pending */ -#define NIOS_JTAG_WI (1 << 9) /* write intr pending*/ -#define NIOS_JTAG_AC (1 << 10) /* activity indicator */ -#define NIOS_JTAG_RRDY (1 << 12) /* read available */ -#define NIOS_JTAG_WSPACE(d) ((d)>>16) /* Write space avail */ - -/*------------------------------------------------------------------------ - * SYSTEM ID - *----------------------------------------------------------------------*/ -typedef volatile struct nios_sysid_t { - unsigned id; /* The system build id*/ - unsigned timestamp; /* Timestamp */ -}nios_sysid_t; - -#endif /* __NIOS2IO_H__ */ -- cgit v0.10.2 From 57cfeb5140642b1071b01a7cc5c34d4ef3166180 Mon Sep 17 00:00:00 2001 From: Thomas Chou Date: Mon, 25 Aug 2014 17:09:07 +0800 Subject: nios2: move nios2.h to arch asm directory The nios2.h is nios2 cpu specific, and should go arch asm directory. Signed-off-by: Thomas Chou diff --git a/arch/nios2/cpu/cpu.c b/arch/nios2/cpu/cpu.c index 36ea90b..39ae972 100644 --- a/arch/nios2/cpu/cpu.c +++ b/arch/nios2/cpu/cpu.c @@ -6,7 +6,7 @@ */ #include -#include +#include #include DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/nios2/cpu/interrupts.c b/arch/nios2/cpu/interrupts.c index b363a1f..9d7e193 100644 --- a/arch/nios2/cpu/interrupts.c +++ b/arch/nios2/cpu/interrupts.c @@ -9,7 +9,7 @@ */ -#include +#include #include #include #include diff --git a/arch/nios2/include/asm/nios2.h b/arch/nios2/include/asm/nios2.h new file mode 100644 index 0000000..abe4df3 --- /dev/null +++ b/arch/nios2/include/asm/nios2.h @@ -0,0 +1,40 @@ +/* + * (C) Copyright 2004, Psyent Corporation + * Scott McNutt + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_NIOS2_H__ +#define __ASM_NIOS2_H__ + +/*------------------------------------------------------------------------ + * Control registers -- use with wrctl() & rdctl() + *----------------------------------------------------------------------*/ +#define CTL_STATUS 0 /* Processor status reg */ +#define CTL_ESTATUS 1 /* Exception status reg */ +#define CTL_BSTATUS 2 /* Break status reg */ +#define CTL_IENABLE 3 /* Interrut enable reg */ +#define CTL_IPENDING 4 /* Interrut pending reg */ + +/*------------------------------------------------------------------------ + * Access to control regs + *----------------------------------------------------------------------*/ + +#define rdctl(reg) __builtin_rdctl(reg) +#define wrctl(reg, val) __builtin_wrctl(reg, val) + +/*------------------------------------------------------------------------ + * Control reg bit masks + *----------------------------------------------------------------------*/ +#define STATUS_IE (1<<0) /* Interrupt enable */ +#define STATUS_U (1<<1) /* User-mode */ + +/*------------------------------------------------------------------------ + * Bit-31 Cache bypass -- only valid for data access. When data cache + * is not implemented, bit 31 is ignored for compatibility. + *----------------------------------------------------------------------*/ +#define CACHE_BYPASS(a) ((a) | 0x80000000) +#define CACHE_NO_BYPASS(a) ((a) & ~0x80000000) + +#endif /* __ASM_NIOS2_H__ */ diff --git a/include/nios2.h b/include/nios2.h deleted file mode 100644 index 0539ec3..0000000 --- a/include/nios2.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * (C) Copyright 2004, Psyent Corporation - * Scott McNutt - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __NIOS2_H__ -#define __NIOS2_H__ - -/*------------------------------------------------------------------------ - * Control registers -- use with wrctl() & rdctl() - *----------------------------------------------------------------------*/ -#define CTL_STATUS 0 /* Processor status reg */ -#define CTL_ESTATUS 1 /* Exception status reg */ -#define CTL_BSTATUS 2 /* Break status reg */ -#define CTL_IENABLE 3 /* Interrut enable reg */ -#define CTL_IPENDING 4 /* Interrut pending reg */ - -/*------------------------------------------------------------------------ - * Access to control regs - *----------------------------------------------------------------------*/ - -#define rdctl(reg) __builtin_rdctl(reg) -#define wrctl(reg, val) __builtin_wrctl(reg, val) - -/*------------------------------------------------------------------------ - * Control reg bit masks - *----------------------------------------------------------------------*/ -#define STATUS_IE (1<<0) /* Interrupt enable */ -#define STATUS_U (1<<1) /* User-mode */ - -/*------------------------------------------------------------------------ - * Bit-31 Cache bypass -- only valid for data access. When data cache - * is not implemented, bit 31 is ignored for compatibility. - *----------------------------------------------------------------------*/ -#define CACHE_BYPASS(a) ((a) | 0x80000000) -#define CACHE_NO_BYPASS(a) ((a) & ~0x80000000) - -#endif /* __NIOS2_H__ */ -- cgit v0.10.2 From 3a55a56662550f945eddaa9123eee655a6efa1c7 Mon Sep 17 00:00:00 2001 From: Thomas Chou Date: Mon, 25 Aug 2014 17:43:12 +0800 Subject: serial: move nios2-yanu.h into opencores_yanu driver The nios2-yanu.h contains hardware registers and bits of opencores yanu. As there is no other user of this header , it should be moved into the driver. Signed-off-by: Thomas Chou CC: Renato Andreola diff --git a/drivers/serial/opencores_yanu.c b/drivers/serial/opencores_yanu.c index d4ed60c..f68c8d0 100644 --- a/drivers/serial/opencores_yanu.c +++ b/drivers/serial/opencores_yanu.c @@ -1,4 +1,8 @@ /* + * Altera NiosII YANU serial interface by Imagos + * please see http://www.opencores.org/project,yanu for + * information/downloads + * * Copyright 2010, Renato Andreola * * SPDX-License-Identifier: GPL-2.0+ @@ -7,7 +11,6 @@ #include #include #include -#include #include DECLARE_GLOBAL_DATA_PTR; @@ -16,6 +19,88 @@ DECLARE_GLOBAL_DATA_PTR; /* YANU Imagos serial port */ /*-----------------------------------------------------------------*/ +#define YANU_MAX_PRESCALER_N ((1 << 4) - 1) /* 15 */ +#define YANU_MAX_PRESCALER_M ((1 << 11) -1) /* 2047 */ +#define YANU_FIFO_SIZE (16) +#define YANU_RXFIFO_SIZE (YANU_FIFO_SIZE) +#define YANU_TXFIFO_SIZE (YANU_FIFO_SIZE) + +#define YANU_RXFIFO_DLY (10*11) +#define YANU_TXFIFO_THR (10) +#define YANU_DATA_CHAR_MASK (0xFF) + +/* data register */ +#define YANU_DATA_OFFSET (0) /* data register offset */ + +#define YANU_CONTROL_OFFSET (4) /* control register offset */ +/* interrupt enable */ +#define YANU_CONTROL_IE_RRDY (1<<0) /* ie on received character ready */ +#define YANU_CONTROL_IE_OE (1<<1) /* ie on rx overrun */ +#define YANU_CONTROL_IE_BRK (1<<2) /* ie on break detect */ +#define YANU_CONTROL_IE_FE (1<<3) /* ie on framing error */ +#define YANU_CONTROL_IE_PE (1<<4) /* ie on parity error */ +#define YANU_CONTROL_IE_TRDY (1<<5) /* ie interrupt on tranmitter ready */ +/* control bits */ +#define YANU_CONTROL_BITS_POS (6) /* bits number pos */ +#define YANU_CONTROL_BITS (1< - * Renato Andreola - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/************************************************************************* - * Altera NiosII YANU serial interface by Imagos - * please see http://www.opencores.org/project,yanu for - * information/downloads - ************************************************************************/ - -#ifndef __NIOS2_YANU_H__ -#define __NIOS2_YANU_H__ - -#define YANU_MAX_PRESCALER_N ((1 << 4) - 1) /* 15 */ -#define YANU_MAX_PRESCALER_M ((1 << 11) -1) /* 2047 */ -#define YANU_FIFO_SIZE (16) -#define YANU_RXFIFO_SIZE (YANU_FIFO_SIZE) -#define YANU_TXFIFO_SIZE (YANU_FIFO_SIZE) - -#define YANU_RXFIFO_DLY (10*11) -#define YANU_TXFIFO_THR (10) -#define YANU_DATA_CHAR_MASK (0xFF) - -/* data register */ -#define YANU_DATA_OFFSET (0) /* data register offset */ - -#define YANU_CONTROL_OFFSET (4) /* control register offset */ -/* interrupt enable */ -#define YANU_CONTROL_IE_RRDY (1<<0) /* ie on received character ready */ -#define YANU_CONTROL_IE_OE (1<<1) /* ie on rx overrun */ -#define YANU_CONTROL_IE_BRK (1<<2) /* ie on break detect */ -#define YANU_CONTROL_IE_FE (1<<3) /* ie on framing error */ -#define YANU_CONTROL_IE_PE (1<<4) /* ie on parity error */ -#define YANU_CONTROL_IE_TRDY (1<<5) /* ie interrupt on tranmitter ready */ -/* control bits */ -#define YANU_CONTROL_BITS_POS (6) /* bits number pos */ -#define YANU_CONTROL_BITS (1< Date: Thu, 28 Aug 2014 17:29:06 +0800 Subject: nios2: link to CONFIG_SYS_MONITOR_BASE and remove text_base hook This patch changes the link script to base at CONFIG_SYS_MONITOR_BASE. Then we can remove the text_base hook in nios2-generic board. Signed-off-by: Thomas Chou diff --git a/arch/nios2/cpu/u-boot.lds b/arch/nios2/cpu/u-boot.lds index be92e8e..6e174be 100644 --- a/arch/nios2/cpu/u-boot.lds +++ b/arch/nios2/cpu/u-boot.lds @@ -5,6 +5,7 @@ * SPDX-License-Identifier: GPL-2.0+ */ +#include OUTPUT_FORMAT("elf32-littlenios2") OUTPUT_ARCH(nios2) @@ -12,6 +13,7 @@ ENTRY(_start) SECTIONS { + . = CONFIG_SYS_MONITOR_BASE; .text : { arch/nios2/cpu/start.o (.text) diff --git a/board/altera/nios2-generic/Makefile b/board/altera/nios2-generic/Makefile index d3c5b43..5e4192c 100644 --- a/board/altera/nios2-generic/Makefile +++ b/board/altera/nios2-generic/Makefile @@ -8,4 +8,3 @@ obj-y := nios2-generic.o obj-$(CONFIG_CMD_IDE) += ../common/cfide.o -obj-y += text_base.o diff --git a/board/altera/nios2-generic/nios2-generic.c b/board/altera/nios2-generic/nios2-generic.c index 5ab9471..834cbeb 100644 --- a/board/altera/nios2-generic/nios2-generic.c +++ b/board/altera/nios2-generic/nios2-generic.c @@ -14,8 +14,6 @@ #include #include -void text_base_hook(void); /* nop hook for text_base.S */ - #if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR) && \ defined(CONFIG_CFI_FLASH_MTD) static void __early_flash_cmd_reset(void) @@ -30,7 +28,6 @@ void early_flash_cmd_reset(void) int board_early_init_f(void) { - text_base_hook(); #ifdef CONFIG_ALTERA_PIO #ifdef LED_PIO_BASE altera_pio_init(LED_PIO_BASE, LED_PIO_WIDTH, 'o', diff --git a/board/altera/nios2-generic/text_base.S b/board/altera/nios2-generic/text_base.S deleted file mode 100644 index f236db1..0000000 --- a/board/altera/nios2-generic/text_base.S +++ /dev/null @@ -1,21 +0,0 @@ -/* - * text_base - * - * (C) Copyright 2010, Thomas Chou - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include - -#ifdef CONFIG_SYS_MONITOR_BASE - .text - /* text base used in link script u-boot.lds */ - .global text_base - .equ text_base,CONFIG_SYS_MONITOR_BASE - /* dummy func to let linker include this file */ - .global text_base_hook -text_base_hook: - ret -#endif diff --git a/board/altera/nios2-generic/u-boot.lds b/board/altera/nios2-generic/u-boot.lds deleted file mode 100644 index e35fae5..0000000 --- a/board/altera/nios2-generic/u-boot.lds +++ /dev/null @@ -1,118 +0,0 @@ -/* - * (C) Copyright 2004, Psyent Corporation - * Scott McNutt - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -OUTPUT_FORMAT("elf32-littlenios2") -OUTPUT_ARCH(nios2) -ENTRY(_start) - -SECTIONS -{ - . = text_base; - .text : - { - arch/nios2/cpu/start.o (.text) - *(.text) - *(.text.*) - *(.gnu.linkonce.t*) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - *(.gnu.linkonce.r*) - } - . = ALIGN (4); - _etext = .; - PROVIDE (etext = .); - - /* CMD TABLE - sandwich this in between text and data so - * the initialization code relocates the command table as - * well -- admittedly, this is just pure laziness ;-) - */ - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - /* INIT DATA sections - "Small" data (see the gcc -G option) - * is always gp-relative. Here we make all init data sections - * adjacent to simplify the startup code -- and provide - * the global pointer for gp-relative access. - */ - _data = .; - .data : - { - *(.data) - *(.data.*) - *(.gnu.linkonce.d*) - } - - . = ALIGN(16); - _gp = .; /* Global pointer addr */ - PROVIDE (gp = .); - - .sdata : - { - *(.sdata) - *(.sdata.*) - *(.gnu.linkonce.s.*) - } - . = ALIGN(4); - - _edata = .; - PROVIDE (edata = .); - - /* UNINIT DATA - Small uninitialized data is first so it's - * adjacent to sdata and can be referenced via gp. The normal - * bss follows. We keep it adjacent to simplify init code. - */ - __bss_start = .; - .sbss (NOLOAD) : - { - *(.sbss) - *(.sbss.*) - *(.gnu.linkonce.sb.*) - *(.scommon) - } - . = ALIGN(4); - .bss (NOLOAD) : - { - *(.bss) - *(.bss.*) - *(.dynbss) - *(COMMON) - *(.scommon) - } - . = ALIGN(4); - __bss_end = .; - PROVIDE (end = .); - - /* DEBUG -- symbol table, string table, etc. etc. - */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug 0 : { *(.debug) } - .line 0 : { *(.line) } - .debug_srcinfo 0 : { *(.debug_srcinfo) } - .debug_sfnames 0 : { *(.debug_sfnames) } - .debug_aranges 0 : { *(.debug_aranges) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_info 0 : { *(.debug_info) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_line 0 : { *(.debug_line) } - .debug_frame 0 : { *(.debug_frame) } - .debug_str 0 : { *(.debug_str) } - .debug_loc 0 : { *(.debug_loc) } - .debug_macinfo 0 : { *(.debug_macinfo) } - .debug_weaknames 0 : { *(.debug_weaknames) } - .debug_funcnames 0 : { *(.debug_funcnames) } - .debug_typenames 0 : { *(.debug_typenames) } - .debug_varnames 0 : { *(.debug_varnames) } -} -- cgit v0.10.2 From 857b9cb69ffc2b5a607e55a09325290274c7272e Mon Sep 17 00:00:00 2001 From: Thomas Chou Date: Sat, 30 Aug 2014 17:45:23 +0800 Subject: nios2: rebase nios2-generic board to 3c120 reference design Though nios2-generic board meant to be a template, it is helpful to be able to test on a real hardware. As the nios2 linux is developed and tested on a 3c120 FPGA based Golden Hardware Reference Design, it makes sense to rebase nios2-generic on this FPGA design. Signed-off-by: Thomas Chou diff --git a/board/altera/nios2-generic/custom_fpga.h b/board/altera/nios2-generic/custom_fpga.h index fd3ec9a..cf75d35 100644 --- a/board/altera/nios2-generic/custom_fpga.h +++ b/board/altera/nios2-generic/custom_fpga.h @@ -1,78 +1,89 @@ /* - * (C) Copyright 2010, Thomas Chou + * This header is generated by sopc2dts + * Sopc2dts is written by Walter Goossens + * in cooperation with the nios2 community * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This file is generated by sopc-create-config-files. + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef _CUSTOM_FPGA_H_ #define _CUSTOM_FPGA_H_ -/* generated from std_1c20.sopc */ - -/* cpu.data_master is a altera_nios2 */ -#define CONFIG_SYS_CLK_FREQ 50000000 -#define CONFIG_SYS_RESET_ADDR 0x00000000 -#define CONFIG_SYS_EXCEPTION_ADDR 0x01000020 -#define CONFIG_SYS_ICACHE_SIZE 4096 -#define CONFIG_SYS_ICACHELINE_SIZE 32 -#define CONFIG_SYS_DCACHE_SIZE 2048 -#define CONFIG_SYS_DCACHELINE_SIZE 4 - -/* sdram.s1 is a altera_avalon_new_sdram_controller */ -#define CONFIG_SYS_SDRAM_BASE 0x01000000 -#define CONFIG_SYS_SDRAM_SIZE 0x01000000 - -/* uart1.s1 is a altera_avalon_uart */ -#define CONFIG_SYS_UART_BASE 0x82120840 -#define CONFIG_SYS_UART_FREQ 50000000 -#define CONFIG_SYS_UART_BAUD 115200 - -/* lan91c111.s1 is a altera_avalon_lan91c111 */ -#define CONFIG_SMC91111_BASE 0x82110300 -#define CONFIG_SMC91111 -#define CONFIG_SMC_USE_32_BIT - -/* epcs_controller.epcs_control_port is a altera_avalon_epcs_flash_controller */ -#define EPCS_CONTROLLER_REG_BASE 0x82100200 -#define CONFIG_SYS_ALTERA_SPI_LIST { EPCS_CONTROLLER_REG_BASE } -#define CONFIG_ALTERA_SPI -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF -#define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_STMICRO +/* generated from qsys_ghrd_3c120.sopcinfo */ + +/* Dumping slaves of cpu.data_master */ + +/* cpu.jtag_debug_module is a altera_nios2_qsys */ +#define CONFIG_SYS_CLK_FREQ 125000000 +#define CONFIG_SYS_DCACHE_SIZE 32768 +#define CONFIG_SYS_DCACHELINE_SIZE 32 +#define CONFIG_SYS_ICACHELINE_SIZE 32 +#define CONFIG_SYS_EXCEPTION_ADDR 0xd0000020 +#define CONFIG_SYS_ICACHE_SIZE 32768 +#define CONFIG_SYS_RESET_ADDR 0xc2800000 +#define IO_REGION_BASE 0xE0000000 + +/* pb_cpu_to_ddr2_bot.s0 is a altera_avalon_mm_bridge */ +/* Dumping slaves of pb_cpu_to_ddr2_bot.m0 */ + +/* ddr2_bot.s1 is a altmemddr2 */ +#define CONFIG_SYS_SDRAM_BASE 0xD0000000 +#define CONFIG_SYS_SDRAM_SIZE 0x08000000 + +/* pb_cpu_to_io.s0 is a altera_avalon_mm_bridge */ +/* Dumping slaves of pb_cpu_to_io.m0 */ + +/* timer_1ms.s1 is a altera_avalon_timer */ +#define CONFIG_SYS_TIMER_IRQ 11 +#define CONFIG_SYS_TIMER_FREQ 125000000 +#define CONFIG_SYS_TIMER_BASE 0xE8400000 + +/* sysid.control_slave is a altera_avalon_sysid_qsys */ +#define CONFIG_SYS_SYSID_BASE 0xE8004D40 /* jtag_uart.avalon_jtag_slave is a altera_avalon_jtag_uart */ -#define CONFIG_SYS_JTAG_UART_BASE 0x821208b0 +#define CONFIG_SYS_JTAG_UART_BASE 0xE8004D50 + +/* tse_mac.control_port is a triple_speed_ethernet */ +#define CONFIG_SYS_ALTERA_TSE_RX_FIFO 2048 +#define CONFIG_SYS_ALTERA_TSE_SGDMA_TX_BASE 0xE8004800 +#define CONFIG_SYS_ALTERA_TSE_SGDMA_RX_BASE 0xE8004400 +#define CONFIG_SYS_ALTERA_TSE_TX_FIFO 2048 +#define CONFIG_SYS_ALTERA_TSE_DESC_SIZE 0x00002000 +#define CONFIG_SYS_ALTERA_TSE_MAC_BASE 0xE8004000 +#define CONFIG_SYS_ALTERA_TSE_DESC_BASE 0xE8002000 +#define CONFIG_ALTERA_TSE +#define CONFIG_MII +#define CONFIG_CMD_MII +#define CONFIG_SYS_ALTERA_TSE_PHY_ADDR 18 +#define CONFIG_SYS_ALTERA_TSE_FLAGS 1 + +/* uart.s1 is a altera_avalon_uart */ +#define CONFIG_SYS_UART_BAUD 115200 +#define CONFIG_SYS_UART_BASE 0xE8004C80 +#define CONFIG_SYS_UART_FREQ 62500000 + +/* user_led_pio_8out.s1 is a altera_avalon_pio */ +#define USER_LED_PIO_8OUT_BASE 0xE8004CC0 -/* led_pio.s1 is a altera_avalon_pio */ -#define LED_PIO_BASE 0x82120870 -#define LED_PIO_WIDTH 8 -#define LED_PIO_RSTVAL 0x0 +/* user_dipsw_pio_8in.s1 is a altera_avalon_pio */ +#define USER_DIPSW_PIO_8IN_BASE 0xE8004CE0 +#define USER_DIPSW_PIO_8IN_IRQ 8 -/* high_res_timer.s1 is a altera_avalon_timer */ -#define CONFIG_SYS_TIMER_BASE 0x82120820 -#define CONFIG_SYS_TIMER_IRQ 3 -#define CONFIG_SYS_TIMER_FREQ 50000000 +/* user_pb_pio_4in.s1 is a altera_avalon_pio */ +#define USER_PB_PIO_4IN_BASE 0xE8004D00 +#define USER_PB_PIO_4IN_IRQ 9 + +/* cfi_flash_64m.uas is a altera_generic_tristate_controller */ +#define CFI_FLASH_64M_BASE 0xE0000000 /* ext_flash.s1 is a altera_avalon_cfi_flash */ -#define CONFIG_SYS_FLASH_BASE 0x80000000 +#define CONFIG_SYS_FLASH_BASE CFI_FLASH_64M_BASE #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* fix amd flash issue */ #define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE #define CONFIG_SYS_FLASH_PROTECTION #define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 1024 - -/* ext_ram.s1 is a altera_nios_dev_kit_stratix_edition_sram2 */ -#define CONFIG_SYS_SRAM_BASE 0x02000000 -#define CONFIG_SYS_SRAM_SIZE 0x00100000 - -/* sysid.control_slave is a altera_avalon_sysid */ -#define CONFIG_SYS_SYSID_BASE 0x821208b8 +#define CONFIG_SYS_MAX_FLASH_SECT 512 #endif /* _CUSTOM_FPGA_H_ */ diff --git a/include/configs/nios2-generic.h b/include/configs/nios2-generic.h index 51b1d00..6247bf1 100644 --- a/include/configs/nios2-generic.h +++ b/include/configs/nios2-generic.h @@ -22,7 +22,7 @@ /* * SERIAL */ -#define CONFIG_ALTERA_UART +#define CONFIG_ALTERA_JTAG_UART #if defined(CONFIG_ALTERA_JTAG_UART) # define CONFIG_SYS_NIOS_CONSOLE CONFIG_SYS_JTAG_UART_BASE #else @@ -56,6 +56,9 @@ #define CONFIG_BOARD_SPECIFIC_LED #define CONFIG_GPIO_LED /* Enable GPIO LED driver */ #define CONFIG_GPIO /* Enable GPIO driver */ +#define LED_PIO_BASE USER_LED_PIO_8OUT_BASE +#define LED_PIO_WIDTH 8 +#define LED_PIO_RSTVAL 0xff #define STATUS_LED_BIT 0 /* Bit-0 on GPIO */ #define STATUS_LED_STATE 1 /* Blinking */ @@ -86,6 +89,10 @@ # define CONFIG_CMD_PING #endif +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_LMB + /* * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the @@ -95,7 +102,7 @@ */ #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SIZE 0x10000 /* 64k, 1 sector */ +#define CONFIG_ENV_SIZE 0x20000 /* 128k, 1 sector */ #define CONFIG_ENV_OVERWRITE /* Serial change Ok */ #define CONFIG_ENV_ADDR ((CONFIG_SYS_RESET_ADDR + \ CONFIG_SYS_MONITOR_LEN) | \ -- cgit v0.10.2