From 1c09fa38e0460a1498110fa418ba5900b9aef2c2 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 30 May 2015 16:39:10 +0200 Subject: sunxi: mmc: Enable pull-up on card-detect gpio pin On some boards we need to enable the internal pull-up te reliable detect that no card is inserted. Signed-off-by: Hans de Goede diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c index bb08147..e7ab828 100644 --- a/drivers/mmc/sunxi_mmc.c +++ b/drivers/mmc/sunxi_mmc.c @@ -75,8 +75,10 @@ static int mmc_resource_init(int sdc_no) cd_pin = sunxi_mmc_getcd_gpio(sdc_no); if (cd_pin >= 0) { ret = gpio_request(cd_pin, "mmc_cd"); - if (!ret) + if (!ret) { + sunxi_gpio_set_pull(cd_pin, SUNXI_GPIO_PULL_UP); ret = gpio_direction_input(cd_pin); + } } return ret; -- cgit v0.10.2 From 7afebb5b295acee1b0f238e7cf4fb4415bcb385f Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 31 May 2015 19:26:54 +0200 Subject: sunxi: usb_phy: Swap check for disconnect threshold Before this commit the code for determining the disconnect threshold was checking for sun4i or sun6i assuming that those where the exception and that newer SoCs use a disconnect threshold of 2 like sun7i does. But it turns out that newer SoCs actually use a disconnect threshold of 3 and sun5i and sun7i are the exceptions, so check for those instead. Here are the settings from the various Allwinner SDK sources: sun4i-a10: USBC_Phy_Write(usbc_no, 0x2a, 3, 2); sun5i-a13: USBC_Phy_Write(usbc_no, 0x2a, 2, 2); sun6i-a31: USBC_Phy_Write(usbc_no, 0x2a, 3, 2); sun7i-a20: USBC_Phy_Write(usbc_no, 0x2a, 2, 2); sun8i-a23: USBC_Phy_Write(usbc_no, 0x2a, 3, 2); sun8i-h3: USBC_Phy_Write(usbc_no, 0x2a, 3, 2); sun9i-a80: USBC_Phy_Write(usbc_no, 0x2a, 3, 2); Note this commit makes no functional changes for sun4i - sun7i, and changes the disconnect threshold for sun8i to match what Allwinner uses. Signed-off-by: Hans de Goede Acked-by: Ian Campbell diff --git a/arch/arm/cpu/armv7/sunxi/usb_phy.c b/arch/arm/cpu/armv7/sunxi/usb_phy.c index 410669e..b07d67f 100644 --- a/arch/arm/cpu/armv7/sunxi/usb_phy.c +++ b/arch/arm/cpu/armv7/sunxi/usb_phy.c @@ -128,10 +128,10 @@ static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy) usb_phy_write(phy, 0x20, 0x14, 5); /* threshold adjustment disconnect */ -#if defined CONFIG_MACH_SUN4I || defined CONFIG_MACH_SUN6I - usb_phy_write(phy, 0x2a, 3, 2); -#else +#if defined CONFIG_MACH_SUN5I || defined CONFIG_MACH_SUN7I usb_phy_write(phy, 0x2a, 2, 2); +#else + usb_phy_write(phy, 0x2a, 3, 2); #endif return; -- cgit v0.10.2 From 2c23da06ba684c2a0ba14583eaed5607ad26db52 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 1 Jun 2015 16:37:24 +0200 Subject: sunxi: Add new Mele_A1000G_quad defconfig The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using the same defconfig (and dts on the kernel side) for both models. Unfortunately this does not work for the otg controller, on the M9 this is routed to a micro-usb connector on the outside, while as on the A1000G-quad it is connected to an usb to sata bridge. This commit adds a new defconfig for the Mele-A1000G-quad to allow using different otg controller settings on the 2 boards. Signed-off-by: Hans de Goede Acked-by: Ian Campbell diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 267fd17..8ca4bf3 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -95,6 +95,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-hummingbird.dtb \ sun6i-a31-i7.dtb \ sun6i-a31-m9.dtb \ + sun6i-a31-mele-a1000g-quad.dtb \ sun6i-a31-mixtile-loftq.dtb \ sun6i-a31s-cs908.dtb \ sun6i-a31s-primo81.dtb diff --git a/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts new file mode 100644 index 0000000..4404f37 --- /dev/null +++ b/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts @@ -0,0 +1,149 @@ +/* + * Copyright 2014 Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun6i-a31.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include + +/ { + model = "Mele A1000G Quad top set box"; + compatible = "mele,a1000g-quad", "allwinner,sun6i-a31"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_m9>; + + blue { + label = "m9:blue:usr"; + gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ + cd-inverted; + status = "okay"; +}; + +&pio { + led_pins_m9: led_pins@0 { + allwinner,pins = "PH13"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mmc0_cd_pin_m9: mmc0_cd_pin@0 { + allwinner,pins = "PH22"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb1_vbus_pin_m9: usb1_vbus_pin@0 { + allwinner,pins = "PC27"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_usb1_vbus { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_vbus_pin_m9>; + gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 22d560a..0618ec8 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -10,6 +10,7 @@ F: configs/Cubieboard_defconfig F: configs/Hyundai_A7HD_defconfig F: configs/jesurun_q5_defconfig F: configs/Mele_A1000_defconfig +F: configs/Mele_A1000G_quad_defconfig F: configs/Mele_M3_defconfig F: configs/Mini-X_defconfig F: configs/mk802_defconfig diff --git a/configs/Mele_A1000G_quad_defconfig b/configs/Mele_A1000G_quad_defconfig new file mode 100644 index 0000000..3a746c8 --- /dev/null +++ b/configs/Mele_A1000G_quad_defconfig @@ -0,0 +1,24 @@ +# The Mele A1000G quad is yet another Allwinnner based Android top set box +# from Mele. +# +# It uses the same case as the original Mele A1000 and the same PCB as the M9, +# the USM sata storage slot is connected via anusb to sata bridge connected to +# the otg controller, this renders the micro USB B receptacle non functional. +# +# It features an A31 SoC, 2G RAM, 16G Nand, 100Mbit ethernet, HDMI out, +# 3 USB A receptacles, 3.5 mm jack for analog audio out, optical spdif, +# RTL R8188EU (USB) wifi and a full size sdcard slot +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN6I=y +CONFIG_DRAM_ZQ=120 +CONFIG_USB1_VBUS_PIN="PC27" +CONFIG_USB2_VBUS_PIN="" +CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mele-a1000g-quad" +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC" +CONFIG_ETH_DESIGNWARE=y +CONFIG_AXP221_DCDC1_VOLT=3300 +CONFIG_AXP221_DLDO1_VOLT=3300 +CONFIG_AXP221_DLDO4_VOLT=3300 +CONFIG_AXP221_ALDO1_VOLT=3300 diff --git a/configs/Mele_M9_defconfig b/configs/Mele_M9_defconfig index babaa5f..955366a 100644 --- a/configs/Mele_M9_defconfig +++ b/configs/Mele_M9_defconfig @@ -1,3 +1,13 @@ +# The Mele M9 is yet another Allwinnner based Android top set box from Mele. +# +# It uses the same PCB as the A1000G quad, but in a new case without a +# USM sata storage slot, and the space on the PCB for the usb to sata +# bridge connected to the otg controller is not populated, possible +# making the micro usb otg connector functional (untested) +# +# It features an A31 SoC, 2G RAM, 16G Nand, 100Mbit ethernet, HDMI out, +# 3 USB A receptacles, 3.5 mm jack for analog audio out, optical spdif, +# micro USB B receptacle, RTL R8188EU (USB) and a full size sdcard slot CONFIG_ARM=y CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN6I=y -- cgit v0.10.2 From a52783e11d3b4ce9bb0b8a4bfc7cfab11d3638a1 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 2 Jun 2015 18:09:25 +0200 Subject: sunxi: gpio: Add "allwinner,sun8i-a33-pinctrl" Add "allwinner,sun8i-a33-pinctrl", this is used by the latest upstream linux sunxi dts files. Signed-off-by: Hans de Goede Acked-by: Ian Campbell diff --git a/drivers/gpio/sunxi_gpio.c b/drivers/gpio/sunxi_gpio.c index f988130..afa165a 100644 --- a/drivers/gpio/sunxi_gpio.c +++ b/drivers/gpio/sunxi_gpio.c @@ -304,6 +304,7 @@ static const struct udevice_id sunxi_gpio_ids[] = { { .compatible = "allwinner,sun6i-a31s-pinctrl" }, { .compatible = "allwinner,sun7i-a20-pinctrl" }, { .compatible = "allwinner,sun8i-a23-pinctrl" }, + { .compatible = "allwinner,sun8i-a33-pinctrl" }, { .compatible = "allwinner,sun9i-a80-pinctrl" }, { } }; -- cgit v0.10.2 From 8b1ba9415149d238f09614066de4c230cf0f5501 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 2 Jun 2015 15:53:40 +0200 Subject: sunxi: Sync dts files with the linux kernel Copy over all the latest dts changes from mripard/sunxi/dt-for-4.2 , this gives us a proper dtsi file for the A33 rather then abusing sun8i-a23.dtsi for this. And this replaces our minimal (dummy) sun7i-a20-mk808c and sun8i-a33-astar-mid756 dts files with proper ones. Signed-off-by: Hans de Goede Acked-by: Ian Campbell diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 8ca4bf3..b683a49 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -122,10 +122,11 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-wits-pro-a20-dkt.dtb \ sun7i-a20-yones-toptech-bd1078.dtb dtb-$(CONFIG_MACH_SUN8I_A23) += \ + sun8i-a23-evb.dtb \ sun8i-a23-ippo-q8h-v5.dtb \ sun8i-a23-ippo-q8h-v1.2.dtb dtb-$(CONFIG_MACH_SUN8I_A33) += \ - sun8i-a33-astar-mid756.dtb \ + sun8i-a33-et-q8-v1.6.dtb \ sun8i-a33-ippo-q8h-v1.2-lcd1024x600.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ diff --git a/arch/arm/dts/sun4i-a10-a1000.dts b/arch/arm/dts/sun4i-a10-a1000.dts index f032814..2630d78 100644 --- a/arch/arm/dts/sun4i-a10-a1000.dts +++ b/arch/arm/dts/sun4i-a10-a1000.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -113,6 +108,10 @@ status = "okay"; }; +&emac_sram { + status = "okay"; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -130,7 +129,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/dts/sun4i-a10-ba10-tvbox.dts index 1a3c7dd..93d4356 100644 --- a/arch/arm/dts/sun4i-a10-ba10-tvbox.dts +++ b/arch/arm/dts/sun4i-a10-ba10-tvbox.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -79,6 +74,10 @@ status = "okay"; }; +&emac_sram { + status = "okay"; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -96,7 +95,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts index 35fb163..5878a0b 100644 --- a/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ b/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/dts/sun4i-a10-cubieboard.dts b/arch/arm/dts/sun4i-a10-cubieboard.dts index 0ba67d7..9afb4e0 100644 --- a/arch/arm/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/dts/sun4i-a10-cubieboard.dts @@ -17,11 +17,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -107,6 +102,10 @@ status = "okay"; }; +&emac_sram { + status = "okay"; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -126,7 +125,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; @@ -206,7 +205,8 @@ &spi0 { pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>; + pinctrl-0 = <&spi0_pins_a>, + <&spi0_cs0_pins_a>; status = "okay"; }; diff --git a/arch/arm/dts/sun4i-a10-gemei-g9.dts b/arch/arm/dts/sun4i-a10-gemei-g9.dts index fbd638a..570754d 100644 --- a/arch/arm/dts/sun4i-a10-gemei-g9.dts +++ b/arch/arm/dts/sun4i-a10-gemei-g9.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/dts/sun4i-a10-hackberry.dts b/arch/arm/dts/sun4i-a10-hackberry.dts index f443788..2b17c51 100644 --- a/arch/arm/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/dts/sun4i-a10-hackberry.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -91,9 +86,13 @@ status = "okay"; }; +&emac_sram { + status = "okay"; +}; + &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts index 9f06b18..43f58fb 100644 --- a/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts +++ b/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/dts/sun4i-a10-inet97fv2.dts b/arch/arm/dts/sun4i-a10-inet97fv2.dts index e19ef52..6c927a8 100644 --- a/arch/arm/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/dts/sun4i-a10-inet97fv2.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/dts/sun4i-a10-jesurun-q5.dts index 1b0452f..dc2f2ae 100644 --- a/arch/arm/dts/sun4i-a10-jesurun-q5.dts +++ b/arch/arm/dts/sun4i-a10-jesurun-q5.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -109,6 +104,10 @@ status = "okay"; }; +&emac_sram { + status = "okay"; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -126,7 +125,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/dts/sun4i-a10-marsboard.dts b/arch/arm/dts/sun4i-a10-marsboard.dts index 00c54d2..02158bc 100644 --- a/arch/arm/dts/sun4i-a10-marsboard.dts +++ b/arch/arm/dts/sun4i-a10-marsboard.dts @@ -17,11 +17,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -104,6 +99,10 @@ status = "okay"; }; +&emac_sram { + status = "okay"; +}; + &emac { pinctrl-names = "default"; pinctrl-0 = <&emac_pins_a>; @@ -174,7 +173,8 @@ &spi0 { pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>; + pinctrl-0 = <&spi0_pins_a>, + <&spi0_cs0_pins_a>; status = "okay"; }; diff --git a/arch/arm/dts/sun4i-a10-mini-xplus.dts b/arch/arm/dts/sun4i-a10-mini-xplus.dts index 0f24914..ebe2a04 100644 --- a/arch/arm/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/dts/sun4i-a10-mini-xplus.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -92,11 +87,11 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; -&ir0_pins_a { +&ir0_rx_pins_a { /* The ir receiver is not always populated */ allwinner,pull = ; }; diff --git a/arch/arm/dts/sun4i-a10-mk802.dts b/arch/arm/dts/sun4i-a10-mk802.dts index 0f1c991..3c7eebe 100644 --- a/arch/arm/dts/sun4i-a10-mk802.dts +++ b/arch/arm/dts/sun4i-a10-mk802.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/dts/sun4i-a10-mk802ii.dts b/arch/arm/dts/sun4i-a10-mk802ii.dts index f97aa6f..c861fa7 100644 --- a/arch/arm/dts/sun4i-a10-mk802ii.dts +++ b/arch/arm/dts/sun4i-a10-mk802ii.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/dts/sun4i-a10-olinuxino-lime.dts index 5840d5e..b64aa4e 100644 --- a/arch/arm/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/dts/sun4i-a10-olinuxino-lime.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -110,6 +105,10 @@ status = "okay"; }; +&emac_sram { + status = "okay"; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; diff --git a/arch/arm/dts/sun4i-a10-pcduino.dts b/arch/arm/dts/sun4i-a10-pcduino.dts index be6948e..4e3e1b9 100644 --- a/arch/arm/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/dts/sun4i-a10-pcduino.dts @@ -17,11 +17,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -124,6 +119,10 @@ status = "okay"; }; +&emac_sram { + status = "okay"; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; diff --git a/arch/arm/dts/sun4i-a10.dtsi b/arch/arm/dts/sun4i-a10.dtsi index 1d7fd68..61c03d1 100644 --- a/arch/arm/dts/sun4i-a10.dtsi +++ b/arch/arm/dts/sun4i-a10.dtsi @@ -17,11 +17,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -66,7 +61,8 @@ ranges; framebuffer@0 { - compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; @@ -74,7 +70,8 @@ }; framebuffer@1 { - compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi"; clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>, <&ahb_gates 46>; @@ -110,11 +107,11 @@ clocks = <&cpu>; clock-latency = <244144>; /* 8 32k periods */ operating-points = < - /* kHz uV */ + /* kHz uV */ 1008000 1400000 - 912000 1350000 - 864000 1300000 - 624000 1250000 + 912000 1350000 + 864000 1300000 + 624000 1250000 >; #cooling-cells = <2>; cooling-min-level = <0>; @@ -434,11 +431,12 @@ usb_clk: clk@01c200cc { #clock-cells = <1>; - #reset-cells = <1>; + #reset-cells = <1>; compatible = "allwinner,sun4i-a10-usb-clk"; reg = <0x01c200cc 0x4>; clocks = <&pll6 1>; - clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy"; + clock-output-names = "usb_ohci0", "usb_ohci1", + "usb_phy"; }; spi3_clk: clk@01c200d4 { @@ -450,44 +448,46 @@ }; }; - /* - * Note we use the address where the mmio registers start, not where - * the SRAM blocks start, this cannot be changed because that would be - * a devicetree ABI change. - */ soc@01c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; - sram@00000000 { - compatible = "allwinner,sun4i-a10-sram"; - reg = <0x00000000 0x4000>; - allwinner,sram-name = "A1"; - }; - - sram@00004000 { - compatible = "allwinner,sun4i-a10-sram"; - reg = <0x00004000 0x4000>; - allwinner,sram-name = "A2"; - }; - - sram@00008000 { - compatible = "allwinner,sun4i-a10-sram"; - reg = <0x00008000 0x4000>; - allwinner,sram-name = "A3-A4"; - }; - - sram@00010000 { - compatible = "allwinner,sun4i-a10-sram"; - reg = <0x00010000 0x1000>; - allwinner,sram-name = "D"; - }; - sram-controller@01c00000 { compatible = "allwinner,sun4i-a10-sram-controller"; reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_a: sram@00000000 { + compatible = "mmio-sram"; + reg = <0x00000000 0xc000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00000000 0xc000>; + + emac_sram: sram-section@8000 { + compatible = "allwinner,sun4i-a10-sram-a3-a4"; + reg = <0x8000 0x4000>; + status = "disabled"; + }; + }; + + sram_d: sram@00010000 { + compatible = "mmio-sram"; + reg = <0x00010000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00010000 0x1000>; + + otg_sram: sram-section@0000 { + compatible = "allwinner,sun4i-a10-sram-d"; + reg = <0x0000 0x1000>; + status = "disabled"; + }; + }; }; dma: dma-controller@01c02000 { @@ -531,6 +531,7 @@ reg = <0x01c0b000 0x1000>; interrupts = <55>; clocks = <&ahb_gates 17>; + allwinner,sram = <&emac_sram 1>; status = "disabled"; }; @@ -784,7 +785,8 @@ }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; allwinner,function = "mmc0"; allwinner,drive = ; allwinner,pull = ; @@ -797,43 +799,85 @@ allwinner,pull = ; }; - ir0_pins_a: ir0@0 { - allwinner,pins = "PB3","PB4"; + ir0_rx_pins_a: ir0@0 { + allwinner,pins = "PB4"; allwinner,function = "ir0"; allwinner,drive = ; allwinner,pull = ; }; - ir1_pins_a: ir1@0 { - allwinner,pins = "PB22","PB23"; + ir0_tx_pins_a: ir0@1 { + allwinner,pins = "PB3"; + allwinner,function = "ir0"; + allwinner,drive = ; + allwinner,pull = ; + }; + + ir1_rx_pins_a: ir1@0 { + allwinner,pins = "PB23"; + allwinner,function = "ir1"; + allwinner,drive = ; + allwinner,pull = ; + }; + + ir1_tx_pins_a: ir1@1 { + allwinner,pins = "PB22"; allwinner,function = "ir1"; allwinner,drive = ; allwinner,pull = ; }; spi0_pins_a: spi0@0 { - allwinner,pins = "PI10", "PI11", "PI12", "PI13"; + allwinner,pins = "PI11", "PI12", "PI13"; + allwinner,function = "spi0"; + allwinner,drive = ; + allwinner,pull = ; + }; + + spi0_cs0_pins_a: spi0_cs0@0 { + allwinner,pins = "PI10"; allwinner,function = "spi0"; allwinner,drive = ; allwinner,pull = ; }; spi1_pins_a: spi1@0 { - allwinner,pins = "PI16", "PI17", "PI18", "PI19"; + allwinner,pins = "PI17", "PI18", "PI19"; + allwinner,function = "spi1"; + allwinner,drive = ; + allwinner,pull = ; + }; + + spi1_cs0_pins_a: spi1_cs0@0 { + allwinner,pins = "PI16"; allwinner,function = "spi1"; allwinner,drive = ; allwinner,pull = ; }; spi2_pins_a: spi2@0 { - allwinner,pins = "PB14", "PB15", "PB16", "PB17"; + allwinner,pins = "PC20", "PC21", "PC22"; allwinner,function = "spi2"; allwinner,drive = ; allwinner,pull = ; }; spi2_pins_b: spi2@1 { - allwinner,pins = "PC19", "PC20", "PC21", "PC22"; + allwinner,pins = "PB15", "PB16", "PB17"; + allwinner,function = "spi2"; + allwinner,drive = ; + allwinner,pull = ; + }; + + spi2_cs0_pins_a: spi2_cs0@0 { + allwinner,pins = "PC19"; + allwinner,function = "spi2"; + allwinner,drive = ; + allwinner,pull = ; + }; + + spi2_cs0_pins_b: spi2_cs0@1 { + allwinner,pins = "PB14"; allwinner,function = "spi2"; allwinner,drive = ; allwinner,pull = ; diff --git a/arch/arm/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/dts/sun5i-a10s-auxtek-t004.dts index ceb0582..2b3511e 100644 --- a/arch/arm/dts/sun5i-a10s-auxtek-t004.dts +++ b/arch/arm/dts/sun5i-a10s-auxtek-t004.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/dts/sun5i-a10s-mk802.dts b/arch/arm/dts/sun5i-a10s-mk802.dts index e1a11e1..46ff940 100644 --- a/arch/arm/dts/sun5i-a10s-mk802.dts +++ b/arch/arm/dts/sun5i-a10s-mk802.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts index 85a8745..a7e19e4 100644 --- a/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -93,6 +88,10 @@ status = "okay"; }; +&emac_sram { + status = "okay"; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; diff --git a/arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts index 9980969..3b05798 100644 --- a/arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts +++ b/arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/dts/sun5i-a10s.dtsi b/arch/arm/dts/sun5i-a10s.dtsi index a78c95d..f11efb7 100644 --- a/arch/arm/dts/sun5i-a10s.dtsi +++ b/arch/arm/dts/sun5i-a10s.dtsi @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -67,7 +62,8 @@ ranges; framebuffer@0 { - compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; @@ -89,13 +85,17 @@ compatible = "allwinner,sun5i-a10s-ahb-gates-clk"; reg = <0x01c20060 0x8>; clocks = <&ahb>; - clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci", - "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0", - "ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram", - "ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1", - "ahb_spi2", "ahb_gps", "ahb_stimer", "ahb_ve", - "ahb_tve", "ahb_lcd", "ahb_csi", "ahb_hdmi", - "ahb_de_be", "ahb_de_fe", "ahb_iep", "ahb_mali400"; + clock-output-names = "ahb_usbotg", "ahb_ehci", + "ahb_ohci", "ahb_ss", "ahb_dma", + "ahb_bist", "ahb_mmc0", "ahb_mmc1", + "ahb_mmc2", "ahb_nand", + "ahb_sdram", "ahb_emac", "ahb_ts", + "ahb_spi0", "ahb_spi1", "ahb_spi2", + "ahb_gps", "ahb_stimer", "ahb_ve", + "ahb_tve", "ahb_lcd", "ahb_csi", + "ahb_hdmi", "ahb_de_be", + "ahb_de_fe", "ahb_iep", + "ahb_mali400"; }; apb0_gates: clk@01c20068 { @@ -103,8 +103,9 @@ compatible = "allwinner,sun5i-a10s-apb0-gates-clk"; reg = <0x01c20068 0x4>; clocks = <&apb0>; - clock-output-names = "apb0_codec", "apb0_iis", "apb0_pio", - "apb0_ir", "apb0_keypad"; + clock-output-names = "apb0_codec", "apb0_iis", + "apb0_pio", "apb0_ir", + "apb0_keypad"; }; apb1_gates: clk@01c2006c { @@ -124,6 +125,7 @@ reg = <0x01c0b000 0x1000>; interrupts = <55>; clocks = <&ahb_gates 17>; + allwinner,sram = <&emac_sram 1>; status = "disabled"; }; @@ -193,9 +195,18 @@ }; mmc1_pins_a: mmc1@0 { - allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8"; + allwinner,pins = "PG3", "PG4", "PG5", + "PG6", "PG7", "PG8"; allwinner,function = "mmc1"; allwinner,drive = ; allwinner,pull = ; }; }; + +&sram_a { + emac_sram: sram-section@8000 { + compatible = "allwinner,sun4i-a10-sram-a3-a4"; + reg = <0x8000 0x4000>; + status = "disabled"; + }; +}; diff --git a/arch/arm/dts/sun5i-a13-hsg-h702.dts b/arch/arm/dts/sun5i-a13-hsg-h702.dts index adf78a2..990f9d6 100644 --- a/arch/arm/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/dts/sun5i-a13-hsg-h702.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/dts/sun5i-a13-olinuxino-micro.dts index 4a00bce..ad84fe4 100644 --- a/arch/arm/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/dts/sun5i-a13-olinuxino-micro.dts @@ -17,11 +17,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/dts/sun5i-a13-olinuxino.dts b/arch/arm/dts/sun5i-a13-olinuxino.dts index 4440156..4232400 100644 --- a/arch/arm/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/dts/sun5i-a13-olinuxino.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/dts/sun5i-a13-utoo-p66.dts b/arch/arm/dts/sun5i-a13-utoo-p66.dts index 6e19f78..8c1bca7 100644 --- a/arch/arm/dts/sun5i-a13-utoo-p66.dts +++ b/arch/arm/dts/sun5i-a13-utoo-p66.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -50,6 +45,7 @@ #include "sunxi-common-regulators.dtsi" #include #include +#include #include / { @@ -101,6 +97,20 @@ pinctrl-0 = <&i2c1_pins_a>; status = "okay"; + icn8318: touchscreen@40 { + compatible = "chipone,icn8318"; + reg = <0x40>; + interrupt-parent = <&pio>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */ + pinctrl-names = "default"; + pinctrl-0 = <&ts_wake_pin_p66>; + wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + }; + pcf8563: rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; @@ -166,6 +176,13 @@ allwinner,pull = ; }; + ts_wake_pin_p66: ts_wake_pin@0 { + allwinner,pins = "PB3"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + usb0_vbus_pin_a: usb0_vbus_pin@0 { allwinner,pins = "PB4"; allwinner,function = "gpio_out"; diff --git a/arch/arm/dts/sun5i-a13.dtsi b/arch/arm/dts/sun5i-a13.dtsi index 0188dee..976d4fa 100644 --- a/arch/arm/dts/sun5i-a13.dtsi +++ b/arch/arm/dts/sun5i-a13.dtsi @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -109,12 +104,16 @@ compatible = "allwinner,sun5i-a13-ahb-gates-clk"; reg = <0x01c20060 0x8>; clocks = <&ahb>; - clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci", - "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0", - "ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram", - "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_stimer", - "ahb_ve", "ahb_lcd", "ahb_csi", "ahb_de_be", - "ahb_de_fe", "ahb_iep", "ahb_mali400"; + clock-output-names = "ahb_usbotg", "ahb_ehci", + "ahb_ohci", "ahb_ss", "ahb_dma", + "ahb_bist", "ahb_mmc0", "ahb_mmc1", + "ahb_mmc2", "ahb_nand", + "ahb_sdram", "ahb_spi0", + "ahb_spi1", "ahb_spi2", + "ahb_stimer", "ahb_ve", "ahb_lcd", + "ahb_csi", "ahb_de_be", + "ahb_de_fe", "ahb_iep", + "ahb_mali400"; }; apb0_gates: clk@01c20068 { @@ -122,7 +121,8 @@ compatible = "allwinner,sun5i-a13-apb0-gates-clk"; reg = <0x01c20068 0x4>; clocks = <&apb0>; - clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir"; + clock-output-names = "apb0_codec", "apb0_pio", + "apb0_ir"; }; apb1_gates: clk@01c2006c { @@ -139,13 +139,13 @@ &cpu0 { clock-latency = <244144>; /* 8 32k periods */ operating-points = < - /* kHz uV */ + /* kHz uV */ 1008000 1400000 - 912000 1350000 - 864000 1300000 - 624000 1200000 - 576000 1200000 - 432000 1200000 + 912000 1350000 + 864000 1300000 + 624000 1200000 + 576000 1200000 + 432000 1200000 >; #cooling-cells = <2>; cooling-min-level = <0>; diff --git a/arch/arm/dts/sun5i.dtsi b/arch/arm/dts/sun5i.dtsi index 96b20d6..54b0978 100644 --- a/arch/arm/dts/sun5i.dtsi +++ b/arch/arm/dts/sun5i.dtsi @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -150,10 +145,16 @@ ahb: ahb@01c20054 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-ahb-clk"; + compatible = "allwinner,sun5i-a13-ahb-clk"; reg = <0x01c20054 0x4>; - clocks = <&axi>; + clocks = <&axi>, <&cpu>, <&pll6 1>; clock-output-names = "ahb"; + /* + * Use PLL6 as parent, instead of CPU/AXI + * which has rate changes due to cpufreq + */ + assigned-clocks = <&ahb>; + assigned-clock-parents = <&pll6 1>; }; apb0: apb0@01c20054 { @@ -276,7 +277,7 @@ usb_clk: clk@01c200cc { #clock-cells = <1>; - #reset-cells = <1>; + #reset-cells = <1>; compatible = "allwinner,sun5i-a13-usb-clk"; reg = <0x01c200cc 0x4>; clocks = <&pll6 1>; @@ -292,44 +293,40 @@ }; }; - /* - * Note we use the address where the mmio registers start, not where - * the SRAM blocks start, this cannot be changed because that would be - * a devicetree ABI change. - */ soc@01c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; - sram@00000000 { - compatible = "allwinner,sun4i-a10-sram"; - reg = <0x00000000 0x4000>; - allwinner,sram-name = "A1"; - }; - - sram@00004000 { - compatible = "allwinner,sun4i-a10-sram"; - reg = <0x00004000 0x4000>; - allwinner,sram-name = "A2"; - }; - - sram@00008000 { - compatible = "allwinner,sun4i-a10-sram"; - reg = <0x00008000 0x4000>; - allwinner,sram-name = "A3-A4"; - }; - - sram@00010000 { - compatible = "allwinner,sun4i-a10-sram"; - reg = <0x00010000 0x1000>; - allwinner,sram-name = "D"; - }; - sram-controller@01c00000 { compatible = "allwinner,sun4i-a10-sram-controller"; reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_a: sram@00000000 { + compatible = "mmio-sram"; + reg = <0x00000000 0xc000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00000000 0xc000>; + }; + + sram_d: sram@00010000 { + compatible = "mmio-sram"; + reg = <0x00010000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00010000 0x1000>; + + otg_sram: sram-section@0000 { + compatible = "allwinner,sun4i-a10-sram-d"; + reg = <0x0000 0x1000>; + status = "disabled"; + }; + }; }; dma: dma-controller@01c02000 { @@ -504,7 +501,8 @@ }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; allwinner,function = "mmc0"; allwinner,drive = ; allwinner,pull = ; diff --git a/arch/arm/dts/sun6i-a31-app4-evb1.dts b/arch/arm/dts/sun6i-a31-app4-evb1.dts index b7b1df4..2f8cfab 100644 --- a/arch/arm/dts/sun6i-a31-app4-evb1.dts +++ b/arch/arm/dts/sun6i-a31-app4-evb1.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/dts/sun6i-a31-colombus.dts b/arch/arm/dts/sun6i-a31-colombus.dts index 95d7ec2..0cf9926 100644 --- a/arch/arm/dts/sun6i-a31-colombus.dts +++ b/arch/arm/dts/sun6i-a31-colombus.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/dts/sun6i-a31-hummingbird.dts b/arch/arm/dts/sun6i-a31-hummingbird.dts index 1e820bc..d0cfada 100644 --- a/arch/arm/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/dts/sun6i-a31-hummingbird.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/dts/sun6i-a31-i7.dts b/arch/arm/dts/sun6i-a31-i7.dts index ce37d69..e9185da 100644 --- a/arch/arm/dts/sun6i-a31-i7.dts +++ b/arch/arm/dts/sun6i-a31-i7.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/dts/sun6i-a31-m9.dts b/arch/arm/dts/sun6i-a31-m9.dts index 29f5fc7..a5660d6 100644 --- a/arch/arm/dts/sun6i-a31-m9.dts +++ b/arch/arm/dts/sun6i-a31-m9.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/dts/sun6i-a31.dtsi b/arch/arm/dts/sun6i-a31.dtsi index 25a97f0..008047a 100644 --- a/arch/arm/dts/sun6i-a31.dtsi +++ b/arch/arm/dts/sun6i-a31.dtsi @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -67,7 +62,8 @@ ranges; framebuffer@0 { - compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; clocks = <&pll6 0>; status = "disabled"; @@ -104,11 +100,11 @@ clocks = <&cpu>; clock-latency = <244144>; /* 8 32k periods */ operating-points = < - /* kHz uV */ + /* kHz uV */ 1008000 1200000 - 864000 1200000 - 720000 1100000 - 480000 1000000 + 864000 1200000 + 720000 1100000 + 480000 1000000 >; #cooling-cells = <2>; cooling-min-level = <0>; @@ -241,6 +237,14 @@ reg = <0x01c20054 0x4>; clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; clock-output-names = "ahb1"; + + /* + * Clock AHB1 from PLL6, instead of CPU/AXI which + * has rate changes due to cpufreq. Also the DMA + * controller requires AHB1 clocked from PLL6. + */ + assigned-clocks = <&ahb1>; + assigned-clock-parents = <&pll6 0>; }; ahb1_gates: clk@01c20060 { @@ -296,9 +300,10 @@ reg = <0x01c2006c 0x4>; clocks = <&apb2>; clock-output-names = "apb2_i2c0", "apb2_i2c1", - "apb2_i2c2", "apb2_i2c3", "apb2_uart0", - "apb2_uart1", "apb2_uart2", "apb2_uart3", - "apb2_uart4", "apb2_uart5"; + "apb2_i2c2", "apb2_i2c3", + "apb2_uart0", "apb2_uart1", + "apb2_uart2", "apb2_uart3", + "apb2_uart4", "apb2_uart5"; }; mmc0_clk: clk@01c20088 { @@ -375,7 +380,7 @@ usb_clk: clk@01c200cc { #clock-cells = <1>; - #reset-cells = <1>; + #reset-cells = <1>; compatible = "allwinner,sun6i-a31-usb-clk"; reg = <0x01c200cc 0x4>; clocks = <&osc24M>; @@ -385,10 +390,13 @@ }; /* - * The following two are dummy clocks, placeholders used in the gmac_tx - * clock. The gmac driver will choose one parent depending on the PHY - * interface mode, using clk_set_rate auto-reparenting. - * The actual TX clock rate is not controlled by the gmac_tx clock. + * The following two are dummy clocks, placeholders + * used in the gmac_tx clock. The gmac driver will + * choose one parent depending on the PHY interface + * mode, using clk_set_rate auto-reparenting. + * + * The actual TX clock rate is not controlled by the + * gmac_tx clock. */ mii_phy_tx_clk: clk@1 { #clock-cells = <0>; @@ -426,10 +434,6 @@ clocks = <&ahb1_gates 6>; resets = <&ahb1_rst 6>; #dma-cells = <1>; - - /* DMA controller requires AHB1 clocked from PLL6 */ - assigned-clocks = <&ahb1>; - assigned-clock-parents = <&pll6 0>; }; mmc0: mmc@01c0f000 { @@ -628,7 +632,8 @@ }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; allwinner,function = "mmc0"; allwinner,drive = ; allwinner,pull = ; @@ -866,7 +871,8 @@ }; timer@01c60000 { - compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer"; + compatible = "allwinner,sun6i-a31-hstimer", + "allwinner,sun7i-a20-hstimer"; reg = <0x01c60000 0x1000>; interrupts = , , @@ -957,7 +963,8 @@ ar100: ar100_clk { compatible = "allwinner,sun6i-a31-ar100-clk"; #clock-cells = <0>; - clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; + clocks = <&osc32k>, <&osc24M>, <&pll6 0>, + <&pll6 0>; clock-output-names = "ar100"; }; diff --git a/arch/arm/dts/sun6i-a31s-cs908.dts b/arch/arm/dts/sun6i-a31s-cs908.dts index 68cb2bf..1e2411a 100644 --- a/arch/arm/dts/sun6i-a31s-cs908.dts +++ b/arch/arm/dts/sun6i-a31s-cs908.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/dts/sun6i-a31s.dtsi b/arch/arm/dts/sun6i-a31s.dtsi index eaf5ec8..c17a327 100644 --- a/arch/arm/dts/sun6i-a31s.dtsi +++ b/arch/arm/dts/sun6i-a31s.dtsi @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/dts/sun7i-a20-bananapi.dts b/arch/arm/dts/sun7i-a20-bananapi.dts index b952ac4..9f7b472 100644 --- a/arch/arm/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/dts/sun7i-a20-bananapi.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -142,7 +137,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; @@ -197,7 +192,9 @@ &spi0 { pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>; + pinctrl-0 = <&spi0_pins_a>, + <&spi0_cs0_pins_a>, + <&spi0_cs1_pins_a>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-bananapro.dts b/arch/arm/dts/sun7i-a20-bananapro.dts index 9d9027f..18fcc87 100644 --- a/arch/arm/dts/sun7i-a20-bananapro.dts +++ b/arch/arm/dts/sun7i-a20-bananapro.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -57,7 +52,7 @@ aliases { serial0 = &uart0; - serial1 = &uart2; + serial1 = &uart4; serial2 = &uart7; }; @@ -154,7 +149,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; @@ -243,7 +238,9 @@ &spi0 { pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>; + pinctrl-0 = <&spi0_pins_a>, + <&spi0_cs0_pins_a>, + <&spi0_cs1_pins_a>; status = "okay"; }; @@ -253,9 +250,9 @@ status = "okay"; }; -&uart2 { +&uart4 { pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_a>; + pinctrl-0 = <&uart4_pins_b>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-cubieboard2.dts b/arch/arm/dts/sun7i-a20-cubieboard2.dts index 3c817ac..39a51d5 100644 --- a/arch/arm/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/dts/sun7i-a20-cubieboard2.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -133,7 +128,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-cubietruck.dts b/arch/arm/dts/sun7i-a20-cubietruck.dts index 613a19e..4611e2f 100644 --- a/arch/arm/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/dts/sun7i-a20-cubietruck.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -160,7 +155,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-hummingbird.dts b/arch/arm/dts/sun7i-a20-hummingbird.dts index d3f15c2..37f4a54 100644 --- a/arch/arm/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/dts/sun7i-a20-hummingbird.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -160,7 +155,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; @@ -245,7 +240,8 @@ &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_b>; + pinctrl-0 = <&spi2_pins_b>, + <&spi2_cs0_pins_b>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/dts/sun7i-a20-i12-tvbox.dts index 3f99b3f..f32f6f2 100644 --- a/arch/arm/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/dts/sun7i-a20-i12-tvbox.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -157,7 +152,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-m3.dts b/arch/arm/dts/sun7i-a20-m3.dts index f2fb26e..8d9ea48 100644 --- a/arch/arm/dts/sun7i-a20-m3.dts +++ b/arch/arm/dts/sun7i-a20-m3.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -117,7 +112,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-mk808c.dts b/arch/arm/dts/sun7i-a20-mk808c.dts index f3f9eeb..4f432f8 100644 --- a/arch/arm/dts/sun7i-a20-mk808c.dts +++ b/arch/arm/dts/sun7i-a20-mk808c.dts @@ -1,20 +1,66 @@ /* - * Copyright 2015 Hans de Goede + * Copyright 2015 Marcus Cooper * - * Minimal dts file for the MK808C for u-boot only + * Marcus Cooper * - * SPDX-License-Identifier: GPL-2.0+ or X11 + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; #include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include / { - model = "MK808C"; + model = "mk808c"; compatible = "allwinner,mk808c", "allwinner,sun7i-a20"; aliases { serial0 = &uart0; + serial1 = &uart2; }; chosen { @@ -30,6 +76,43 @@ status = "okay"; }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + &ohci0 { status = "okay"; }; @@ -38,8 +121,28 @@ status = "okay"; }; +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts index 6592cb2..769726d 100644 --- a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts @@ -19,11 +19,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts index 3a7a2c2..8acff78 100644 --- a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/dts/sun7i-a20-olinuxino-micro.dts index 82802b6..00f8f25 100644 --- a/arch/arm/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/dts/sun7i-a20-olinuxino-micro.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -250,13 +245,15 @@ &spi1 { pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins_a>; + pinctrl-0 = <&spi1_pins_a>, + <&spi1_cs0_pins_a>; status = "okay"; }; &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; + pinctrl-0 = <&spi2_pins_a>, + <&spi2_cs0_pins_a>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/dts/sun7i-a20-orangepi-mini.dts index 0556938..73cd81e 100644 --- a/arch/arm/dts/sun7i-a20-orangepi-mini.dts +++ b/arch/arm/dts/sun7i-a20-orangepi-mini.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -137,7 +132,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-orangepi.dts b/arch/arm/dts/sun7i-a20-orangepi.dts index 7e6405c..55a06ce 100644 --- a/arch/arm/dts/sun7i-a20-orangepi.dts +++ b/arch/arm/dts/sun7i-a20-orangepi.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -132,7 +127,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts index 810c5f7..5361fce 100644 --- a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -125,7 +120,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-pcduino3.dts b/arch/arm/dts/sun7i-a20-pcduino3.dts index cd05267..afc9ece 100644 --- a/arch/arm/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/dts/sun7i-a20-pcduino3.dts @@ -17,11 +17,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -154,7 +149,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/dts/sun7i-a20-wexler-tab7200.dts index 2ad3b09..83c6d3f 100644 --- a/arch/arm/dts/sun7i-a20-wexler-tab7200.dts +++ b/arch/arm/dts/sun7i-a20-wexler-tab7200.dts @@ -17,11 +17,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/dts/sun7i-a20.dtsi b/arch/arm/dts/sun7i-a20.dtsi index d4ba772..6a63f30 100644 --- a/arch/arm/dts/sun7i-a20.dtsi +++ b/arch/arm/dts/sun7i-a20.dtsi @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -68,7 +63,8 @@ ranges; framebuffer@0 { - compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; @@ -104,14 +100,14 @@ clocks = <&cpu>; clock-latency = <244144>; /* 8 32k periods */ operating-points = < - /* kHz uV */ - 960000 1400000 - 912000 1400000 - 864000 1300000 - 720000 1200000 - 528000 1100000 - 312000 1000000 - 144000 900000 + /* kHz uV */ + 960000 1400000 + 912000 1400000 + 864000 1300000 + 720000 1200000 + 528000 1100000 + 312000 1000000 + 144000 900000 >; #cooling-cells = <2>; cooling-min-level = <0>; @@ -224,7 +220,8 @@ compatible = "allwinner,sun4i-a10-pll6-clk"; reg = <0x01c20028 0x4>; clocks = <&osc24M>; - clock-output-names = "pll6_sata", "pll6_other", "pll6"; + clock-output-names = "pll6_sata", "pll6_other", "pll6", + "pll6_div_4"; }; pll8: clk@01c20040 { @@ -253,10 +250,16 @@ ahb: ahb@01c20054 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-ahb-clk"; + compatible = "allwinner,sun5i-a13-ahb-clk"; reg = <0x01c20054 0x4>; - clocks = <&axi>; + clocks = <&axi>, <&pll6 3>, <&pll6 1>; clock-output-names = "ahb"; + /* + * Use PLL6 as parent, instead of CPU/AXI + * which has rate changes due to cpufreq + */ + assigned-clocks = <&ahb>; + assigned-clock-parents = <&pll6 3>; }; ahb_gates: clk@01c20060 { @@ -441,11 +444,12 @@ usb_clk: clk@01c200cc { #clock-cells = <1>; - #reset-cells = <1>; + #reset-cells = <1>; compatible = "allwinner,sun4i-a10-usb-clk"; reg = <0x01c200cc 0x4>; clocks = <&pll6 1>; - clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy"; + clock-output-names = "usb_ohci0", "usb_ohci1", + "usb_phy"; }; spi3_clk: clk@01c200d4 { @@ -465,10 +469,13 @@ }; /* - * The following two are dummy clocks, placeholders used in the gmac_tx - * clock. The gmac driver will choose one parent depending on the PHY - * interface mode, using clk_set_rate auto-reparenting. - * The actual TX clock rate is not controlled by the gmac_tx clock. + * The following two are dummy clocks, placeholders + * used in the gmac_tx clock. The gmac driver will + * choose one parent depending on the PHY interface + * mode, using clk_set_rate auto-reparenting. + * + * The actual TX clock rate is not controlled by the + * gmac_tx clock. */ mii_phy_tx_clk: clk@2 { #clock-cells = <0>; @@ -521,44 +528,46 @@ }; }; - /* - * Note we use the address where the mmio registers start, not where - * the SRAM blocks start, this cannot be changed because that would be - * a devicetree ABI change. - */ soc@01c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; - sram@00000000 { - compatible = "allwinner,sun4i-a10-sram"; - reg = <0x00000000 0x4000>; - allwinner,sram-name = "A1"; - }; - - sram@00004000 { - compatible = "allwinner,sun4i-a10-sram"; - reg = <0x00004000 0x4000>; - allwinner,sram-name = "A2"; - }; - - sram@00008000 { - compatible = "allwinner,sun4i-a10-sram"; - reg = <0x00008000 0x4000>; - allwinner,sram-name = "A3-A4"; - }; - - sram@00010000 { - compatible = "allwinner,sun4i-a10-sram"; - reg = <0x00010000 0x1000>; - allwinner,sram-name = "D"; - }; - sram-controller@01c00000 { compatible = "allwinner,sun4i-a10-sram-controller"; reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_a: sram@00000000 { + compatible = "mmio-sram"; + reg = <0x00000000 0xc000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00000000 0xc000>; + + emac_sram: sram-section@8000 { + compatible = "allwinner,sun4i-a10-sram-a3-a4"; + reg = <0x8000 0x4000>; + status = "disabled"; + }; + }; + + sram_d: sram@00010000 { + compatible = "mmio-sram"; + reg = <0x00010000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00010000 0x1000>; + + otg_sram: sram-section@0000 { + compatible = "allwinner,sun4i-a10-sram-d"; + reg = <0x0000 0x1000>; + status = "disabled"; + }; + }; }; nmi_intc: interrupt-controller@01c00030 { @@ -610,6 +619,7 @@ reg = <0x01c0b000 0x1000>; interrupts = ; clocks = <&ahb_gates 17>; + allwinner,sram = <&emac_sram 1>; status = "disabled"; }; @@ -837,6 +847,13 @@ allwinner,pull = ; }; + uart4_pins_b: uart4@1 { + allwinner,pins = "PH4", "PH5"; + allwinner,function = "uart4"; + allwinner,drive = ; + allwinner,pull = ; + }; + uart5_pins_a: uart5@0 { allwinner,pins = "PI10", "PI11"; allwinner,function = "uart5"; @@ -938,35 +955,71 @@ }; spi0_pins_a: spi0@0 { - allwinner,pins = "PI10", "PI11", "PI12", "PI13", "PI14"; + allwinner,pins = "PI11", "PI12", "PI13"; + allwinner,function = "spi0"; + allwinner,drive = ; + allwinner,pull = ; + }; + + spi0_cs0_pins_a: spi0_cs0@0 { + allwinner,pins = "PI10"; + allwinner,function = "spi0"; + allwinner,drive = ; + allwinner,pull = ; + }; + + spi0_cs1_pins_a: spi0_cs1@0 { + allwinner,pins = "PI14"; allwinner,function = "spi0"; allwinner,drive = ; allwinner,pull = ; }; spi1_pins_a: spi1@0 { - allwinner,pins = "PI16", "PI17", "PI18", "PI19"; + allwinner,pins = "PI17", "PI18", "PI19"; + allwinner,function = "spi1"; + allwinner,drive = ; + allwinner,pull = ; + }; + + spi1_cs0_pins_a: spi1_cs0@0 { + allwinner,pins = "PI16"; allwinner,function = "spi1"; allwinner,drive = ; allwinner,pull = ; }; spi2_pins_a: spi2@0 { - allwinner,pins = "PC19", "PC20", "PC21", "PC22"; + allwinner,pins = "PC20", "PC21", "PC22"; allwinner,function = "spi2"; allwinner,drive = ; allwinner,pull = ; }; spi2_pins_b: spi2@1 { - allwinner,pins = "PB14", "PB15", "PB16", "PB17"; + allwinner,pins = "PB15", "PB16", "PB17"; + allwinner,function = "spi2"; + allwinner,drive = ; + allwinner,pull = ; + }; + + spi2_cs0_pins_a: spi2_cs0@0 { + allwinner,pins = "PC19"; + allwinner,function = "spi2"; + allwinner,drive = ; + allwinner,pull = ; + }; + + spi2_cs0_pins_b: spi2_cs0@1 { + allwinner,pins = "PB14"; allwinner,function = "spi2"; allwinner,drive = ; allwinner,pull = ; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; allwinner,function = "mmc0"; allwinner,drive = ; allwinner,pull = ; @@ -980,28 +1033,44 @@ }; mmc2_pins_a: mmc2@0 { - allwinner,pins = "PC6","PC7","PC8","PC9","PC10","PC11"; + allwinner,pins = "PC6", "PC7", "PC8", + "PC9", "PC10", "PC11"; allwinner,function = "mmc2"; allwinner,drive = ; allwinner,pull = ; }; mmc3_pins_a: mmc3@0 { - allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9"; + allwinner,pins = "PI4", "PI5", "PI6", + "PI7", "PI8", "PI9"; allwinner,function = "mmc3"; allwinner,drive = ; allwinner,pull = ; }; - ir0_pins_a: ir0@0 { - allwinner,pins = "PB3","PB4"; + ir0_rx_pins_a: ir0@0 { + allwinner,pins = "PB4"; + allwinner,function = "ir0"; + allwinner,drive = ; + allwinner,pull = ; + }; + + ir0_tx_pins_a: ir0@1 { + allwinner,pins = "PB3"; allwinner,function = "ir0"; allwinner,drive = ; allwinner,pull = ; }; - ir1_pins_a: ir1@0 { - allwinner,pins = "PB22","PB23"; + ir1_rx_pins_a: ir1@0 { + allwinner,pins = "PB23"; + allwinner,function = "ir1"; + allwinner,drive = ; + allwinner,pull = ; + }; + + ir1_tx_pins_a: ir1@1 { + allwinner,pins = "PB22"; allwinner,function = "ir1"; allwinner,drive = ; allwinner,pull = ; @@ -1171,7 +1240,8 @@ }; i2c0: i2c@01c2ac00 { - compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; + compatible = "allwinner,sun7i-a20-i2c", + "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = ; clocks = <&apb1_gates 0>; @@ -1181,7 +1251,8 @@ }; i2c1: i2c@01c2b000 { - compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; + compatible = "allwinner,sun7i-a20-i2c", + "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = ; clocks = <&apb1_gates 1>; @@ -1191,7 +1262,8 @@ }; i2c2: i2c@01c2b400 { - compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; + compatible = "allwinner,sun7i-a20-i2c", + "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = ; clocks = <&apb1_gates 2>; @@ -1201,7 +1273,8 @@ }; i2c3: i2c@01c2b800 { - compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; + compatible = "allwinner,sun7i-a20-i2c", + "allwinner,sun4i-a10-i2c"; reg = <0x01c2b800 0x400>; interrupts = ; clocks = <&apb1_gates 3>; @@ -1211,7 +1284,8 @@ }; i2c4: i2c@01c2c000 { - compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; + compatible = "allwinner,sun7i-a20-i2c", + "allwinner,sun4i-a10-i2c"; reg = <0x01c2c000 0x400>; interrupts = ; clocks = <&apb1_gates 15>; diff --git a/arch/arm/dts/sun8i-a23-a33.dtsi b/arch/arm/dts/sun8i-a23-a33.dtsi new file mode 100644 index 0000000..faea94e --- /dev/null +++ b/arch/arm/dts/sun8i-a23-a33.dtsi @@ -0,0 +1,626 @@ +/* + * Copyright 2014 Chen-Yu Tsai + * + * Chen-Yu Tsai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "skeleton.dtsi" + +#include + +#include + +/ { + interrupt-parent = <&gic>; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer@0 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0"; + clocks = <&pll6 0>; + status = "disabled"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + clock-frequency = <24000000>; + arm,cpu-registers-not-fw-configured; + }; + + cpus { + enable-method = "allwinner,sun8i-a23"; + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + + pll1: clk@01c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a23-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll1"; + }; + + /* dummy clock until actually implemented */ + pll5: pll5_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "pll5"; + }; + + pll6: clk@01c20028 { + #clock-cells = <1>; + compatible = "allwinner,sun6i-a31-pll6-clk"; + reg = <0x01c20028 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll6", "pll6x2"; + }; + + cpu: cpu_clk@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-cpu-clk"; + reg = <0x01c20050 0x4>; + + /* + * PLL1 is listed twice here. + * While it looks suspicious, it's actually documented + * that way both in the datasheet and in the code from + * Allwinner. + */ + clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; + clock-output-names = "cpu"; + }; + + axi: axi_clk@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a23-axi-clk"; + reg = <0x01c20050 0x4>; + clocks = <&cpu>; + clock-output-names = "axi"; + }; + + ahb1: ahb1_clk@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun6i-a31-ahb1-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; + clock-output-names = "ahb1"; + }; + + apb1: apb1_clk@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb0-clk"; + reg = <0x01c20054 0x4>; + clocks = <&ahb1>; + clock-output-names = "apb1"; + }; + + ahb1_gates: clk@01c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun8i-a23-ahb1-gates-clk"; + reg = <0x01c20060 0x8>; + clocks = <&ahb1>; + clock-output-names = "ahb1_mipidsi", "ahb1_dma", + "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2", + "ahb1_nand", "ahb1_sdram", + "ahb1_hstimer", "ahb1_spi0", + "ahb1_spi1", "ahb1_otg", "ahb1_ehci", + "ahb1_ohci", "ahb1_ve", "ahb1_lcd", + "ahb1_csi", "ahb1_be", "ahb1_fe", + "ahb1_gpu", "ahb1_spinlock", + "ahb1_drc"; + }; + + apb1_gates: clk@01c20068 { + #clock-cells = <1>; + compatible = "allwinner,sun8i-a23-apb1-gates-clk"; + reg = <0x01c20068 0x4>; + clocks = <&apb1>; + clock-output-names = "apb1_codec", "apb1_pio", + "apb1_daudio0", "apb1_daudio1"; + }; + + apb2: clk@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb1-clk"; + reg = <0x01c20058 0x4>; + clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; + clock-output-names = "apb2"; + }; + + apb2_gates: clk@01c2006c { + #clock-cells = <1>; + compatible = "allwinner,sun8i-a23-apb2-gates-clk"; + reg = <0x01c2006c 0x4>; + clocks = <&apb2>; + clock-output-names = "apb2_i2c0", "apb2_i2c1", + "apb2_i2c2", "apb2_uart0", + "apb2_uart1", "apb2_uart2", + "apb2_uart3", "apb2_uart4"; + }; + + mmc0_clk: clk@01c20088 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6 0>; + clock-output-names = "mmc0", + "mmc0_output", + "mmc0_sample"; + }; + + mmc1_clk: clk@01c2008c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c2008c 0x4>; + clocks = <&osc24M>, <&pll6 0>; + clock-output-names = "mmc1", + "mmc1_output", + "mmc1_sample"; + }; + + mmc2_clk: clk@01c20090 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c20090 0x4>; + clocks = <&osc24M>, <&pll6 0>; + clock-output-names = "mmc2", + "mmc2_output", + "mmc2_sample"; + }; + + usb_clk: clk@01c200cc { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun8i-a23-usb-clk"; + reg = <0x01c200cc 0x4>; + clocks = <&osc24M>; + clock-output-names = "usb_phy0", "usb_phy1", "usb_hsic", + "usb_hsic_12M", "usb_ohci0"; + }; + }; + + soc@01c00000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dma: dma-controller@01c02000 { + compatible = "allwinner,sun8i-a23-dma"; + reg = <0x01c02000 0x1000>; + interrupts = ; + clocks = <&ahb1_gates 6>; + resets = <&ahb1_rst 6>; + #dma-cells = <1>; + }; + + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb1_gates 8>, + <&mmc0_clk 0>, + <&mmc0_clk 1>, + <&mmc0_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ahb1_rst 8>; + reset-names = "ahb"; + interrupts = ; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ahb1_gates 9>, + <&mmc1_clk 0>, + <&mmc1_clk 1>, + <&mmc1_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ahb1_rst 9>; + reset-names = "ahb"; + interrupts = ; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb1_gates 10>, + <&mmc2_clk 0>, + <&mmc2_clk 1>, + <&mmc2_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ahb1_rst 10>; + reset-names = "ahb"; + interrupts = ; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + pio: pinctrl@01c20800 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01c20800 0x400>; + /* interrupts get set in SoC specific dtsi file */ + clocks = <&apb1_gates 5>; + gpio-controller; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <3>; + + uart0_pins_a: uart0@0 { + allwinner,pins = "PF2", "PF4"; + allwinner,function = "uart0"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + allwinner,function = "mmc0"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mmc1_pins_a: mmc1@0 { + allwinner,pins = "PG0", "PG1", "PG2", + "PG3", "PG4", "PG5"; + allwinner,function = "mmc1"; + allwinner,drive = ; + allwinner,pull = ; + }; + + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PH2", "PH3"; + allwinner,function = "i2c0"; + allwinner,drive = ; + allwinner,pull = ; + }; + + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PH4", "PH5"; + allwinner,function = "i2c1"; + allwinner,drive = ; + allwinner,pull = ; + }; + + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PE12", "PE13"; + allwinner,function = "i2c2"; + allwinner,drive = ; + allwinner,pull = ; + }; + }; + + ahb1_rst: reset@01c202c0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x01c202c0 0xc>; + }; + + apb1_rst: reset@01c202d0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x01c202d0 0x4>; + }; + + apb2_rst: reset@01c202d8 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x01c202d8 0x4>; + }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0xa0>; + interrupts = , + ; + clocks = <&osc24M>; + }; + + wdt0: watchdog@01c20ca0 { + compatible = "allwinner,sun6i-a31-wdt"; + reg = <0x01c20ca0 0x20>; + interrupts = ; + }; + + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = ; + status = "disabled"; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb2_gates 16>; + resets = <&apb2_rst 16>; + dmas = <&dma 6>, <&dma 6>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb2_gates 17>; + resets = <&apb2_rst 17>; + dmas = <&dma 7>, <&dma 7>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart2: serial@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb2_gates 18>; + resets = <&apb2_rst 18>; + dmas = <&dma 8>, <&dma 8>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb2_gates 19>; + resets = <&apb2_rst 19>; + dmas = <&dma 9>, <&dma 9>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart4: serial@01c29000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29000 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb2_gates 20>; + resets = <&apb2_rst 20>; + dmas = <&dma 10>, <&dma 10>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c0: i2c@01c2ac00 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = ; + clocks = <&apb2_gates 0>; + resets = <&apb2_rst 0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@01c2b000 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = ; + clocks = <&apb2_gates 1>; + resets = <&apb2_rst 1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@01c2b400 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = ; + clocks = <&apb2_gates 2>; + resets = <&apb2_rst 2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gic: interrupt-controller@01c81000 { + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x1000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = ; + }; + + rtc: rtc@01f00000 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01f00000 0x54>; + interrupts = , + ; + }; + + prcm@01f01400 { + compatible = "allwinner,sun8i-a23-prcm"; + reg = <0x01f01400 0x200>; + + ar100: ar100_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "ar100"; + }; + + ahb0: ahb0_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&ar100>; + clock-output-names = "ahb0"; + }; + + apb0: apb0_clk { + compatible = "allwinner,sun8i-a23-apb0-clk"; + #clock-cells = <0>; + clocks = <&ahb0>; + clock-output-names = "apb0"; + }; + + apb0_gates: apb0_gates_clk { + compatible = "allwinner,sun8i-a23-apb0-gates-clk"; + #clock-cells = <1>; + clocks = <&apb0>; + clock-output-names = "apb0_pio", "apb0_timer", + "apb0_rsb", "apb0_uart", + "apb0_i2c"; + }; + + apb0_rst: apb0_rst { + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + }; + + cpucfg@01f01c00 { + compatible = "allwinner,sun8i-a23-cpuconfig"; + reg = <0x01f01c00 0x300>; + }; + + r_uart: serial@01f02800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01f02800 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb0_gates 4>; + resets = <&apb0_rst 4>; + status = "disabled"; + }; + + r_pio: pinctrl@01f02c00 { + compatible = "allwinner,sun8i-a23-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = ; + clocks = <&apb0_gates 0>; + resets = <&apb0_rst 0>; + gpio-controller; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <3>; + + r_uart_pins_a: r_uart@0 { + allwinner,pins = "PL2", "PL3"; + allwinner,function = "s_uart"; + allwinner,drive = ; + allwinner,pull = ; + }; + }; + }; +}; diff --git a/arch/arm/dts/sun8i-a23-evb.dts b/arch/arm/dts/sun8i-a23-evb.dts new file mode 100644 index 0000000..610786e --- /dev/null +++ b/arch/arm/dts/sun8i-a23-evb.dts @@ -0,0 +1,134 @@ +/* + * Copyright 2015 Maxime Ripard + * + * Maxime Ripard + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a23.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include +#include + +/ { + model = "Allwinner A23 Evaluation Board"; + compatible = "allwinner,sun8i-a23-evb", "allwinner,sun8i-a23"; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + serial0 = &r_uart; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@190 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <190000>; + }; + + button@390 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <390000>; + }; + + button@600 { + label = "Home"; + linux,code = ; + channel = <0>; + voltage = <600000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_evb>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; + +&pio { + mmc0_cd_pin_evb: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +/* + * The RX line has a non-populated resistance. In order to use it, you + * need to solder R207 on the back of the board in order to close the + * line and get a working UART. + */ +&r_uart { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts index dd31c53..382d64c 100644 --- a/arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts +++ b/arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts index f5658d1..95134c6 100644 --- a/arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts +++ b/arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/dts/sun8i-a23.dtsi b/arch/arm/dts/sun8i-a23.dtsi index 6d6eda3..8698f7a 100644 --- a/arch/arm/dts/sun8i-a23.dtsi +++ b/arch/arm/dts/sun8i-a23.dtsi @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -47,217 +42,14 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - -#include - -#include +#include "sun8i-a23-a33.dtsi" / { - interrupt-parent = <&gic>; - - chosen { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - framebuffer@0 { - compatible = "allwinner,simple-framebuffer", - "simple-framebuffer"; - allwinner,pipeline = "de_be0-lcd0"; - clocks = <&pll6 0>; - status = "disabled"; - }; - }; - - timer { - compatible = "arm,armv7-timer"; - interrupts = , - , - , - ; - clock-frequency = <24000000>; - arm,cpu-registers-not-fw-configured; - }; - - cpus { - enable-method = "allwinner,sun8i-a23"; - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "arm,cortex-a7"; - device_type = "cpu"; - reg = <0>; - }; - - cpu@1 { - compatible = "arm,cortex-a7"; - device_type = "cpu"; - reg = <1>; - }; - }; - memory { reg = <0x40000000 0x40000000>; }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - osc24M: osc24M_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "osc24M"; - }; - - osc32k: osc32k_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "osc32k"; - }; - - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun8i-a23-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - /* dummy clock until actually implemented */ - pll5: pll5_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - clock-output-names = "pll5"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun6i-a31-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6", "pll6x2"; - }; - - cpu: cpu_clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20050 0x4>; - - /* - * PLL1 is listed twice here. - * While it looks suspicious, it's actually documented - * that way both in the datasheet and in the code from - * Allwinner. - */ - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; - clock-output-names = "cpu"; - }; - - axi: axi_clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun8i-a23-axi-clk"; - reg = <0x01c20050 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - ahb1: ahb1_clk@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun6i-a31-ahb1-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; - clock-output-names = "ahb1"; - }; - - apb1: apb1_clk@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb1>; - clock-output-names = "apb1"; - }; - - ahb1_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun8i-a23-ahb1-gates-clk"; - reg = <0x01c20060 0x8>; - clocks = <&ahb1>; - clock-output-names = "ahb1_mipidsi", "ahb1_dma", - "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2", - "ahb1_nand", "ahb1_sdram", - "ahb1_hstimer", "ahb1_spi0", - "ahb1_spi1", "ahb1_otg", "ahb1_ehci", - "ahb1_ohci", "ahb1_ve", "ahb1_lcd", - "ahb1_csi", "ahb1_be", "ahb1_fe", - "ahb1_gpu", "ahb1_spinlock", - "ahb1_drc"; - }; - - apb1_gates: clk@01c20068 { - #clock-cells = <1>; - compatible = "allwinner,sun8i-a23-apb1-gates-clk"; - reg = <0x01c20068 0x4>; - clocks = <&apb1>; - clock-output-names = "apb1_codec", "apb1_pio", - "apb1_daudio0", "apb1_daudio1"; - }; - - apb2: clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; - clock-output-names = "apb2"; - }; - - apb2_gates: clk@01c2006c { - #clock-cells = <1>; - compatible = "allwinner,sun8i-a23-apb2-gates-clk"; - reg = <0x01c2006c 0x4>; - clocks = <&apb2>; - clock-output-names = "apb2_i2c0", "apb2_i2c1", - "apb2_i2c2", "apb2_uart0", - "apb2_uart1", "apb2_uart2", - "apb2_uart3", "apb2_uart4"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 0>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 0>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 0>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - mbus_clk: clk@01c2015c { #clock-cells = <0>; compatible = "allwinner,sun8i-a23-mbus-clk"; @@ -266,368 +58,11 @@ clock-output-names = "mbus"; }; }; +}; - soc@01c00000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - dma: dma-controller@01c02000 { - compatible = "allwinner,sun8i-a23-dma"; - reg = <0x01c02000 0x1000>; - interrupts = ; - clocks = <&ahb1_gates 6>; - resets = <&ahb1_rst 6>; - #dma-cells = <1>; - }; - - mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c0f000 0x1000>; - clocks = <&ahb1_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - resets = <&ahb1_rst 8>; - reset-names = "ahb"; - interrupts = ; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - mmc1: mmc@01c10000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c10000 0x1000>; - clocks = <&ahb1_gates 9>, - <&mmc1_clk 0>, - <&mmc1_clk 1>, - <&mmc1_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - resets = <&ahb1_rst 9>; - reset-names = "ahb"; - interrupts = ; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c11000 0x1000>; - clocks = <&ahb1_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - resets = <&ahb1_rst 10>; - reset-names = "ahb"; - interrupts = ; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - pio: pinctrl@01c20800 { - compatible = "allwinner,sun8i-a23-pinctrl"; - reg = <0x01c20800 0x400>; - interrupts = , - , - ; - clocks = <&apb1_gates 5>; - gpio-controller; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #gpio-cells = <3>; - - uart0_pins_a: uart0@0 { - allwinner,pins = "PF2", "PF4"; - allwinner,function = "uart0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; - allwinner,function = "mmc0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - mmc1_pins_a: mmc1@0 { - allwinner,pins = "PG0","PG1","PG2","PG3","PG4","PG5"; - allwinner,function = "mmc1"; - allwinner,drive = ; - allwinner,pull = ; - }; - - i2c0_pins_a: i2c0@0 { - allwinner,pins = "PH2", "PH3"; - allwinner,function = "i2c0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - i2c1_pins_a: i2c1@0 { - allwinner,pins = "PH4", "PH5"; - allwinner,function = "i2c1"; - allwinner,drive = ; - allwinner,pull = ; - }; - - i2c2_pins_a: i2c2@0 { - allwinner,pins = "PE12", "PE13"; - allwinner,function = "i2c2"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; - - ahb1_rst: reset@01c202c0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x01c202c0 0xc>; - }; - - apb1_rst: reset@01c202d0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x01c202d0 0x4>; - }; - - apb2_rst: reset@01c202d8 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x01c202d8 0x4>; - }; - - timer@01c20c00 { - compatible = "allwinner,sun4i-a10-timer"; - reg = <0x01c20c00 0xa0>; - interrupts = , - ; - clocks = <&osc24M>; - }; - - wdt0: watchdog@01c20ca0 { - compatible = "allwinner,sun6i-a31-wdt"; - reg = <0x01c20ca0 0x20>; - interrupts = ; - }; - - lradc: lradc@01c22800 { - compatible = "allwinner,sun4i-a10-lradc-keys"; - reg = <0x01c22800 0x100>; - interrupts = ; - status = "disabled"; - }; - - uart0: serial@01c28000 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28000 0x400>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 16>; - resets = <&apb2_rst 16>; - dmas = <&dma 6>, <&dma 6>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart1: serial@01c28400 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28400 0x400>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 17>; - resets = <&apb2_rst 17>; - dmas = <&dma 7>, <&dma 7>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart2: serial@01c28800 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28800 0x400>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 18>; - resets = <&apb2_rst 18>; - dmas = <&dma 8>, <&dma 8>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart3: serial@01c28c00 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28c00 0x400>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 19>; - resets = <&apb2_rst 19>; - dmas = <&dma 9>, <&dma 9>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart4: serial@01c29000 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c29000 0x400>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 20>; - resets = <&apb2_rst 20>; - dmas = <&dma 10>, <&dma 10>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - i2c0: i2c@01c2ac00 { - compatible = "allwinner,sun6i-a31-i2c"; - reg = <0x01c2ac00 0x400>; - interrupts = ; - clocks = <&apb2_gates 0>; - resets = <&apb2_rst 0>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c1: i2c@01c2b000 { - compatible = "allwinner,sun6i-a31-i2c"; - reg = <0x01c2b000 0x400>; - interrupts = ; - clocks = <&apb2_gates 1>; - resets = <&apb2_rst 1>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c2: i2c@01c2b400 { - compatible = "allwinner,sun6i-a31-i2c"; - reg = <0x01c2b400 0x400>; - interrupts = ; - clocks = <&apb2_gates 2>; - resets = <&apb2_rst 2>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - gic: interrupt-controller@01c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; - reg = <0x01c81000 0x1000>, - <0x01c82000 0x1000>, - <0x01c84000 0x2000>, - <0x01c86000 0x2000>; - interrupt-controller; - #interrupt-cells = <3>; - interrupts = ; - }; - - rtc: rtc@01f00000 { - compatible = "allwinner,sun6i-a31-rtc"; - reg = <0x01f00000 0x54>; - interrupts = , - ; - }; - - prcm@01f01400 { - compatible = "allwinner,sun8i-a23-prcm"; - reg = <0x01f01400 0x200>; - - ar100: ar100_clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <1>; - clocks = <&osc24M>; - clock-output-names = "ar100"; - }; - - ahb0: ahb0_clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <1>; - clocks = <&ar100>; - clock-output-names = "ahb0"; - }; - - apb0: apb0_clk { - compatible = "allwinner,sun8i-a23-apb0-clk"; - #clock-cells = <0>; - clocks = <&ahb0>; - clock-output-names = "apb0"; - }; - - apb0_gates: apb0_gates_clk { - compatible = "allwinner,sun8i-a23-apb0-gates-clk"; - #clock-cells = <1>; - clocks = <&apb0>; - clock-output-names = "apb0_pio", "apb0_timer", - "apb0_rsb", "apb0_uart", - "apb0_i2c"; - }; - - apb0_rst: apb0_rst { - compatible = "allwinner,sun6i-a31-clock-reset"; - #reset-cells = <1>; - }; - }; - - cpucfg@01f01c00 { - compatible = "allwinner,sun8i-a23-cpuconfig"; - reg = <0x01f01c00 0x300>; - }; - - r_uart: serial@01f02800 { - compatible = "snps,dw-apb-uart"; - reg = <0x01f02800 0x400>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb0_gates 4>; - resets = <&apb0_rst 4>; - status = "disabled"; - }; - - r_pio: pinctrl@01f02c00 { - compatible = "allwinner,sun8i-a23-r-pinctrl"; - reg = <0x01f02c00 0x400>; - interrupts = ; - clocks = <&apb0_gates 0>; - resets = <&apb0_rst 0>; - gpio-controller; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #gpio-cells = <3>; - - r_uart_pins_a: r_uart@0 { - allwinner,pins = "PL2", "PL3"; - allwinner,function = "s_uart"; - allwinner,drive = ; - allwinner,pull = ; - }; - }; - }; +&pio { + compatible = "allwinner,sun8i-a23-pinctrl"; + interrupts = , + , + ; }; diff --git a/arch/arm/dts/sun8i-a33-astar-mid756.dts b/arch/arm/dts/sun8i-a33-astar-mid756.dts deleted file mode 100644 index d9ce446..0000000 --- a/arch/arm/dts/sun8i-a33-astar-mid756.dts +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright 2015 Hans de Goede - * - * Minimal dts file for the Astar MID756 for u-boot only - * - * SPDX-License-Identifier: GPL-2.0+ or X11 - */ - -/dts-v1/; -#include "sun8i-a23.dtsi" - -/ { - model = "Astar MID756"; - compatible = "astar,mid756", "allwinner,sun8i-a23"; - - aliases { - serial0 = &r_uart; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun8i-a33-et-q8-v1.6.dts b/arch/arm/dts/sun8i-a33-et-q8-v1.6.dts new file mode 100644 index 0000000..19db844 --- /dev/null +++ b/arch/arm/dts/sun8i-a33-et-q8-v1.6.dts @@ -0,0 +1,88 @@ +/* + * Copyright 2015 Vishnu Patekar + * Vishnu Patekar + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a33.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include +#include + +/ { + model = "ET Q8 Quad Core Tablet (v1.6)"; + compatible = "et,q8-v1.6", "allwinner,sun8i-a33"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <400000>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2-lcd1024x600.dts b/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2-lcd1024x600.dts index 4a43187..9777149 100644 --- a/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2-lcd1024x600.dts +++ b/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2-lcd1024x600.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -#include "sun8i-a23.dtsi" +#include "sun8i-a33.dtsi" / { model = "Ippo Q8H V1.2 (A33, 1024x600)"; diff --git a/arch/arm/dts/sun8i-a33.dtsi b/arch/arm/dts/sun8i-a33.dtsi new file mode 100644 index 0000000..9b43bc6 --- /dev/null +++ b/arch/arm/dts/sun8i-a33.dtsi @@ -0,0 +1,89 @@ +/* + * Copyright 2014 Chen-Yu Tsai + * + * Chen-Yu Tsai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sun8i-a23-a33.dtsi" + +/ { + cpus { + cpu@2 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <2>; + }; + + cpu@3 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <3>; + }; + }; + + memory { + reg = <0x40000000 0x80000000>; + }; + + clocks { + /* Dummy clock for pll11 (DDR1) until actually implemented */ + pll11: pll11_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "pll11"; + }; + + mbus_clk: clk@01c2015c { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a23-mbus-clk"; + reg = <0x01c2015c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5>, <&pll11>; + clock-output-names = "mbus"; + }; + }; +}; + +&pio { + compatible = "allwinner,sun8i-a33-pinctrl"; + interrupts = , + ; +}; diff --git a/arch/arm/dts/sun9i-a80-optimus.dts b/arch/arm/dts/sun9i-a80-optimus.dts index e463138..6ce4b5e 100644 --- a/arch/arm/dts/sun9i-a80-optimus.dts +++ b/arch/arm/dts/sun9i-a80-optimus.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/dts/sun9i-a80.dtsi b/arch/arm/dts/sun9i-a80.dtsi index d3dece2..a43ad77 100644 --- a/arch/arm/dts/sun9i-a80.dtsi +++ b/arch/arm/dts/sun9i-a80.dtsi @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -289,7 +284,7 @@ "ahb0_ss", "ahb0_sd", "ahb0_nand1", "ahb0_nand0", "ahb0_sdram", "ahb0_mipi_hsi", "ahb0_sata", "ahb0_ts", - "ahb0_spi0","ahb0_spi1", "ahb0_spi2", + "ahb0_spi0", "ahb0_spi1", "ahb0_spi2", "ahb0_spi3"; }; @@ -570,6 +565,12 @@ clocks = <&osc24M>; }; + wdt: watchdog@06000ca0 { + compatible = "allwinner,sun6i-a31-wdt"; + reg = <0x06000ca0 0x20>; + interrupts = ; + }; + pio: pinctrl@06000800 { compatible = "allwinner,sun9i-a80-pinctrl"; reg = <0x06000800 0x400>; diff --git a/arch/arm/dts/sunxi-common-regulators.dtsi b/arch/arm/dts/sunxi-common-regulators.dtsi index e02baa6..51cc838 100644 --- a/arch/arm/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/dts/sunxi-common-regulators.dtsi @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/configs/Astar_MID756_defconfig b/configs/Astar_MID756_defconfig index f334032..b3ae133 100644 --- a/configs/Astar_MID756_defconfig +++ b/configs/Astar_MID756_defconfig @@ -12,7 +12,7 @@ CONFIG_VIDEO_LCD_POWER="PH7" CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" CONFIG_USB_MUSB_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-astar-mid756" +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-et-q8-v1.6" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" CONFIG_CMD_SETEXPR=y -- cgit v0.10.2 From 373a6cb38123b58306ee773e82b1952b11800e3a Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 2 Jun 2015 16:07:19 +0200 Subject: sunxi: Rename Astar_MID756 to Et_q8_v1_6 to match kernel dts name Rename the Astar_MID756 to Et_q8_v1_6 to match the kernel dts name. Signed-off-by: Hans de Goede Acked-by: Ian Campbell diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 0618ec8..7a42055 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -64,11 +64,6 @@ M: Paul Kocialkowski S: Maintained F: configs/Ampe_A76_defconfig -Astar MID756 BOARD -M: VishnuPatekar -S: Maintained -F: configs/Astar_MID756_defconfig - COLOMBUS BOARD M: Maxime Ripard S: Maintained @@ -82,6 +77,11 @@ F: include/configs/sun7i.h F: configs/Cubieboard2_defconfig F: configs/Cubietruck_defconfig +ET Q8 V1.6 Tablet BOARD +M: VishnuPatekar +S: Maintained +F: configs/Et_q8_v1_6_defconfig + FORFUN-Q88DB TABLET M: Jens Lucius S: Maintained diff --git a/configs/Astar_MID756_defconfig b/configs/Astar_MID756_defconfig deleted file mode 100644 index b3ae133..0000000 --- a/configs/Astar_MID756_defconfig +++ /dev/null @@ -1,21 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_SUNXI=y -CONFIG_MACH_SUN8I_A33=y -CONFIG_DRAM_CLK=480 -CONFIG_DRAM_ZQ=15291 -CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" -CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" -CONFIG_AXP_GPIO=y -CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:168,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0" -CONFIG_VIDEO_LCD_DCLK_PHASE=0 -CONFIG_VIDEO_LCD_POWER="PH7" -CONFIG_VIDEO_LCD_BL_EN="PH6" -CONFIG_VIDEO_LCD_BL_PWM="PH0" -CONFIG_USB_MUSB_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-et-q8-v1.6" -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y -CONFIG_AXP221_DLDO1_VOLT=3300 -CONFIG_AXP221_ALDO1_VOLT=3000 diff --git a/configs/Et_q8_v1_6_defconfig b/configs/Et_q8_v1_6_defconfig new file mode 100644 index 0000000..b3ae133 --- /dev/null +++ b/configs/Et_q8_v1_6_defconfig @@ -0,0 +1,21 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN8I_A33=y +CONFIG_DRAM_CLK=480 +CONFIG_DRAM_ZQ=15291 +CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" +CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" +CONFIG_AXP_GPIO=y +CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:168,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0" +CONFIG_VIDEO_LCD_DCLK_PHASE=0 +CONFIG_VIDEO_LCD_POWER="PH7" +CONFIG_VIDEO_LCD_BL_EN="PH6" +CONFIG_VIDEO_LCD_BL_PWM="PH0" +CONFIG_USB_MUSB_SUNXI=y +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-et-q8-v1.6" +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NET=y +CONFIG_AXP221_DLDO1_VOLT=3300 +CONFIG_AXP221_ALDO1_VOLT=3000 -- cgit v0.10.2 From 348cce20efca09a340e75bef8654684782d320ba Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 2 Jun 2015 16:18:44 +0200 Subject: sunxi: Add a proper dts file for the ga10h a33 based tablet Add and use a proper dts for the ga10h a33 based tablet, as submitted upstream. Signed-off-by: Hans de Goede Acked-by: Ian Campbell diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index b683a49..fe3aa89 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -127,6 +127,7 @@ dtb-$(CONFIG_MACH_SUN8I_A23) += \ sun8i-a23-ippo-q8h-v1.2.dtb dtb-$(CONFIG_MACH_SUN8I_A33) += \ sun8i-a33-et-q8-v1.6.dtb \ + sun8i-a33-ga10h-v1.1.dtb \ sun8i-a33-ippo-q8h-v1.2-lcd1024x600.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ diff --git a/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts new file mode 100644 index 0000000..8667033 --- /dev/null +++ b/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts @@ -0,0 +1,125 @@ +/* + * Copyright 2015 Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a33.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include +#include + +/ { + model = "Allwinner GA10H Quad Core Tablet (v1.1)"; + compatible = "allwinner,ga10h-v1.1", "allwinner,sun8i-a33"; + + aliases { + serial0 = &r_uart; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <400000>; + }; + + button@600 { + label = "Back"; + linux,code = ; + channel = <0>; + voltage = <600000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; + +&pio { + mmc0_cd_pin_q8h: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +&r_uart { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; + status = "okay"; +}; diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig index 3beed58..4344bb7 100644 --- a/configs/ga10h_v1_1_defconfig +++ b/configs/ga10h_v1_1_defconfig @@ -14,7 +14,7 @@ CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" CONFIG_VIDEO_LCD_PANEL_LVDS=y CONFIG_USB_MUSB_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2-lcd1024x600" +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ga10h-v1.1" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" CONFIG_CMD_SETEXPR=y -- cgit v0.10.2 From 277af820b5207d43473869da2c86412d2b51d461 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 3 Jun 2015 20:08:37 +0200 Subject: sunxi: Select CONFIG_CMD_NET and CONFIG_CMD_SETEXPR by default Select CONFIG_CMD_NET and CONFIG_CMD_SETEXPR by default rather then needing to have this in every sunxi defconfig file. This also fixes the Merrii_A80_Optimus defconfig no longer building. Cc: Maxin B. John Reported-by: Maxin B. John Signed-off-by: Hans de Goede Acked-by: Ian Campbell diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index e744d4a..b2eca51 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -581,4 +581,10 @@ config DM_SERIAL config DM_USB default y if !USB_MUSB_SUNXI +config CMD_SETEXPR + default y + +config CMD_NET + default y + endif diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig index c46279e..971e11a 100644 --- a/configs/A10-OLinuXino-Lime_defconfig +++ b/configs/A10-OLinuXino-Lime_defconfig @@ -7,5 +7,3 @@ CONFIG_SYS_CLK_FREQ=912000000 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig index 0fbc880..d4953aa 100644 --- a/configs/A10s-OLinuXino-M_defconfig +++ b/configs/A10s-OLinuXino-M_defconfig @@ -9,5 +9,3 @@ CONFIG_USB1_VBUS_PIN="PB10" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-olinuxino-micro" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,SUNXI_EMAC,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig index 5d541b0..4bee362 100644 --- a/configs/A13-OLinuXinoM_defconfig +++ b/configs/A13-OLinuXinoM_defconfig @@ -13,5 +13,3 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino-micro" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig index 5125224..43d5fa1 100644 --- a/configs/A13-OLinuXino_defconfig +++ b/configs/A13-OLinuXino_defconfig @@ -14,5 +14,3 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig index 5493b1e..78eee6a 100644 --- a/configs/A20-OLinuXino-Lime2_defconfig +++ b/configs/A20-OLinuXino-Lime2_defconfig @@ -8,6 +8,4 @@ CONFIG_USB0_VBUS_DET="PH5" CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig index 114b811..0b64d94 100644 --- a/configs/A20-OLinuXino-Lime_defconfig +++ b/configs/A20-OLinuXino-Lime_defconfig @@ -5,6 +5,4 @@ CONFIG_DRAM_CLK=480 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig index fc736b0..e61067d 100644 --- a/configs/A20-OLinuXino_MICRO_defconfig +++ b/configs/A20-OLinuXino_MICRO_defconfig @@ -9,6 +9,4 @@ CONFIG_VIDEO_VGA=y CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/Ainol_AW1_defconfig b/configs/Ainol_AW1_defconfig index 4ac6ffa..94c5443 100644 --- a/configs/Ainol_AW1_defconfig +++ b/configs/Ainol_AW1_defconfig @@ -15,5 +15,3 @@ CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-ainol-aw1" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/Ampe_A76_defconfig b/configs/Ampe_A76_defconfig index 410b152..63307b8 100644 --- a/configs/Ampe_A76_defconfig +++ b/configs/Ampe_A76_defconfig @@ -14,5 +14,3 @@ CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-ampe-a76" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/Auxtek-T004_defconfig b/configs/Auxtek-T004_defconfig index ce46f01..6e320bd 100644 --- a/configs/Auxtek-T004_defconfig +++ b/configs/Auxtek-T004_defconfig @@ -6,5 +6,3 @@ CONFIG_USB1_VBUS_PIN="PG13" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t004" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig index 2779719..904d27d 100644 --- a/configs/Bananapi_defconfig +++ b/configs/Bananapi_defconfig @@ -6,6 +6,4 @@ CONFIG_GMAC_TX_DELAY=3 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig index 5740d82..7b7556b 100644 --- a/configs/Bananapro_defconfig +++ b/configs/Bananapro_defconfig @@ -8,6 +8,4 @@ CONFIG_GMAC_TX_DELAY=3 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapro" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig index db22e4c..850d70d 100644 --- a/configs/CSQ_CS908_defconfig +++ b/configs/CSQ_CS908_defconfig @@ -7,8 +7,6 @@ CONFIG_USB2_VBUS_PIN="" CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-cs908" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3300 diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig index 9bce985..819b353 100644 --- a/configs/Chuwi_V7_CW0825_defconfig +++ b/configs/Chuwi_V7_CW0825_defconfig @@ -14,8 +14,6 @@ CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-chuwi-v7-cw0825" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_VIDEO_LCD_SPI_CS="PA0" CONFIG_VIDEO_LCD_SPI_SCLK="PA1" CONFIG_VIDEO_LCD_SPI_MOSI="PA2" diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig index 04f0e2a..e6bed2d 100644 --- a/configs/Colombus_defconfig +++ b/configs/Colombus_defconfig @@ -7,7 +7,5 @@ CONFIG_USB1_VBUS_PIN="" CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-colombus" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP221_ALDO1_VOLT=3300 diff --git a/configs/Cubieboard2_defconfig b/configs/Cubieboard2_defconfig index 4f403d4..e88cce4 100644 --- a/configs/Cubieboard2_defconfig +++ b/configs/Cubieboard2_defconfig @@ -6,6 +6,4 @@ CONFIG_MMC0_CD_PIN="PH1" CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubieboard2" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig index 5ed877c..ce9591d 100644 --- a/configs/Cubieboard_defconfig +++ b/configs/Cubieboard_defconfig @@ -5,5 +5,3 @@ CONFIG_DRAM_CLK=480 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-cubieboard" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig index 2acc3ad..c34ab50 100644 --- a/configs/Cubietruck_defconfig +++ b/configs/Cubietruck_defconfig @@ -7,6 +7,4 @@ CONFIG_GMAC_TX_DELAY=1 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubietruck" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/Et_q8_v1_6_defconfig b/configs/Et_q8_v1_6_defconfig index b3ae133..4e8350f 100644 --- a/configs/Et_q8_v1_6_defconfig +++ b/configs/Et_q8_v1_6_defconfig @@ -15,7 +15,5 @@ CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-et-q8-v1.6" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3000 diff --git a/configs/Hummingbird_A31_defconfig b/configs/Hummingbird_A31_defconfig index 2fea609..015140f 100644 --- a/configs/Hummingbird_A31_defconfig +++ b/configs/Hummingbird_A31_defconfig @@ -9,7 +9,5 @@ CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25" CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-hummingbird" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP221_ALDO1_VOLT=3300 diff --git a/configs/Hyundai_A7HD_defconfig b/configs/Hyundai_A7HD_defconfig index 2c86124..e26f4f0 100644 --- a/configs/Hyundai_A7HD_defconfig +++ b/configs/Hyundai_A7HD_defconfig @@ -16,5 +16,3 @@ CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-hyundai-a7hd" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig b/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig index 7ad3e28..5b1080f 100644 --- a/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig +++ b/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig @@ -15,7 +15,5 @@ CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2-lcd1024x600" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3000 diff --git a/configs/Ippo_q8h_v1_2_defconfig b/configs/Ippo_q8h_v1_2_defconfig index 47631f0..8d03300 100644 --- a/configs/Ippo_q8h_v1_2_defconfig +++ b/configs/Ippo_q8h_v1_2_defconfig @@ -15,7 +15,5 @@ CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v1.2" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3000 diff --git a/configs/Ippo_q8h_v5_defconfig b/configs/Ippo_q8h_v5_defconfig index fc9428b..1a07064 100644 --- a/configs/Ippo_q8h_v5_defconfig +++ b/configs/Ippo_q8h_v5_defconfig @@ -15,7 +15,5 @@ CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v5" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3000 diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig b/configs/Linksprite_pcDuino3_Nano_defconfig index e750508..be381ef 100644 --- a/configs/Linksprite_pcDuino3_Nano_defconfig +++ b/configs/Linksprite_pcDuino3_Nano_defconfig @@ -8,6 +8,4 @@ CONFIG_GMAC_TX_DELAY=3 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3-nano" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/Linksprite_pcDuino3_defconfig b/configs/Linksprite_pcDuino3_defconfig index 0e8bec7..2c846f9 100644 --- a/configs/Linksprite_pcDuino3_defconfig +++ b/configs/Linksprite_pcDuino3_defconfig @@ -6,6 +6,4 @@ CONFIG_DRAM_ZQ=122 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/Linksprite_pcDuino_defconfig b/configs/Linksprite_pcDuino_defconfig index 3ec7b2b..aed5b59 100644 --- a/configs/Linksprite_pcDuino_defconfig +++ b/configs/Linksprite_pcDuino_defconfig @@ -5,5 +5,3 @@ CONFIG_DRAM_CLK=408 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pcduino" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/MK808C_defconfig b/configs/MK808C_defconfig index 4f37304..88df54c 100644 --- a/configs/MK808C_defconfig +++ b/configs/MK808C_defconfig @@ -5,5 +5,3 @@ CONFIG_DRAM_CLK=384 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-mk808c" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/MSI_Primo73_defconfig b/configs/MSI_Primo73_defconfig index 5c43450..00f0796 100644 --- a/configs/MSI_Primo73_defconfig +++ b/configs/MSI_Primo73_defconfig @@ -11,5 +11,3 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-primo73" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig index ab04519..83a95cb 100644 --- a/configs/MSI_Primo81_defconfig +++ b/configs/MSI_Primo81_defconfig @@ -10,8 +10,6 @@ CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828=y # CONFIG_USB_KEYBOARD is not set CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-primo81" CONFIG_SPL=y -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_VIDEO_LCD_SSD2828_TX_CLK=27 CONFIG_VIDEO_LCD_SSD2828_RESET="PA26" diff --git a/configs/Marsboard_A10_defconfig b/configs/Marsboard_A10_defconfig index dad41bb..5a9703d 100644 --- a/configs/Marsboard_A10_defconfig +++ b/configs/Marsboard_A10_defconfig @@ -4,5 +4,3 @@ CONFIG_MACH_SUN4I=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-marsboard" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig index 65cdcd0..6678e4c 100644 --- a/configs/Mele_A1000_defconfig +++ b/configs/Mele_A1000_defconfig @@ -5,5 +5,3 @@ CONFIG_VIDEO_VGA=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-a1000" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/Mele_I7_defconfig b/configs/Mele_I7_defconfig index ab545f9..bf67433 100644 --- a/configs/Mele_I7_defconfig +++ b/configs/Mele_I7_defconfig @@ -7,8 +7,6 @@ CONFIG_USB2_VBUS_PIN="" CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-i7" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP221_DCDC1_VOLT=3300 CONFIG_AXP221_DLDO1_VOLT=3300 diff --git a/configs/Mele_M3_defconfig b/configs/Mele_M3_defconfig index 42bff2f..9c2eb86 100644 --- a/configs/Mele_M3_defconfig +++ b/configs/Mele_M3_defconfig @@ -8,6 +8,4 @@ CONFIG_VIDEO_VGA=y CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m3" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/Mele_M5_defconfig b/configs/Mele_M5_defconfig index 72d55e2..5ee648b 100644 --- a/configs/Mele_M5_defconfig +++ b/configs/Mele_M5_defconfig @@ -7,6 +7,4 @@ CONFIG_MMC0_CD_PIN="PH1" CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m5" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,USB_EHCI,STATUSLED=234" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/Mele_M9_defconfig b/configs/Mele_M9_defconfig index 955366a..16881fa 100644 --- a/configs/Mele_M9_defconfig +++ b/configs/Mele_M9_defconfig @@ -17,8 +17,6 @@ CONFIG_USB2_VBUS_PIN="" CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-m9" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP221_DCDC1_VOLT=3300 CONFIG_AXP221_DLDO1_VOLT=3300 diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig index b107827..918b639 100644 --- a/configs/Mini-X_defconfig +++ b/configs/Mini-X_defconfig @@ -4,5 +4,3 @@ CONFIG_MACH_SUN4I=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mini-xplus" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/Orangepi_defconfig b/configs/Orangepi_defconfig index b700a9f..9d5e5dc 100644 --- a/configs/Orangepi_defconfig +++ b/configs/Orangepi_defconfig @@ -9,6 +9,4 @@ CONFIG_GMAC_TX_DELAY=3 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/Orangepi_mini_defconfig b/configs/Orangepi_mini_defconfig index 8a07bae..99cc600 100644 --- a/configs/Orangepi_mini_defconfig +++ b/configs/Orangepi_mini_defconfig @@ -11,6 +11,4 @@ CONFIG_GMAC_TX_DELAY=3 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi-mini" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/TZX-Q8-713B7_defconfig b/configs/TZX-Q8-713B7_defconfig index 52642d6..c33317e 100644 --- a/configs/TZX-Q8-713B7_defconfig +++ b/configs/TZX-Q8-713B7_defconfig @@ -14,5 +14,3 @@ CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-tzx-q8-713b7" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/UTOO_P66_defconfig b/configs/UTOO_P66_defconfig index bd6b66f..9ab2fa5 100644 --- a/configs/UTOO_P66_defconfig +++ b/configs/UTOO_P66_defconfig @@ -20,5 +20,3 @@ CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-utoo-p66" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/Wexler_TAB7200_defconfig b/configs/Wexler_TAB7200_defconfig index 2beda9e..011e921 100644 --- a/configs/Wexler_TAB7200_defconfig +++ b/configs/Wexler_TAB7200_defconfig @@ -9,5 +9,3 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wexler-tab7200" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/Wits_Pro_A20_DKT_defconfig b/configs/Wits_Pro_A20_DKT_defconfig index e8fc4f0..8bdca23 100644 --- a/configs/Wits_Pro_A20_DKT_defconfig +++ b/configs/Wits_Pro_A20_DKT_defconfig @@ -11,6 +11,4 @@ CONFIG_VIDEO_LCD_PANEL_LVDS=y CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wits-pro-a20-dkt" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/Yones_Toptech_BD1078_defconfig b/configs/Yones_Toptech_BD1078_defconfig index e684267..346e689 100644 --- a/configs/Yones_Toptech_BD1078_defconfig +++ b/configs/Yones_Toptech_BD1078_defconfig @@ -20,5 +20,3 @@ CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-yones-toptech-bd1078" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig index 80d2bd5..f2ab415 100644 --- a/configs/ba10_tv_box_defconfig +++ b/configs/ba10_tv_box_defconfig @@ -7,5 +7,3 @@ CONFIG_USB2_VBUS_PIN="PH12" CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-ba10-tvbox" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/forfun_q88db_defconfig b/configs/forfun_q88db_defconfig index d6e6bd6..fc7ce6a 100644 --- a/configs/forfun_q88db_defconfig +++ b/configs/forfun_q88db_defconfig @@ -13,5 +13,3 @@ CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-forfun-q88db" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig index 4344bb7..67b40c2 100644 --- a/configs/ga10h_v1_1_defconfig +++ b/configs/ga10h_v1_1_defconfig @@ -17,7 +17,5 @@ CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ga10h-v1.1" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3000 diff --git a/configs/i12-tvbox_defconfig b/configs/i12-tvbox_defconfig index ec3c3e0..c8ccf45 100644 --- a/configs/i12-tvbox_defconfig +++ b/configs/i12-tvbox_defconfig @@ -5,6 +5,4 @@ CONFIG_DRAM_CLK=384 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-i12-tvbox" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/iNet_3F_defconfig b/configs/iNet_3F_defconfig index 919be44..e807aeb 100644 --- a/configs/iNet_3F_defconfig +++ b/configs/iNet_3F_defconfig @@ -15,5 +15,3 @@ CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet-3f" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/iNet_3W_defconfig b/configs/iNet_3W_defconfig index b195f78..eaf7c5a 100644 --- a/configs/iNet_3W_defconfig +++ b/configs/iNet_3W_defconfig @@ -15,5 +15,3 @@ CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet-3w" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/iNet_86VS_defconfig b/configs/iNet_86VS_defconfig index b12af76..017a87a 100644 --- a/configs/iNet_86VS_defconfig +++ b/configs/iNet_86VS_defconfig @@ -13,5 +13,3 @@ CONFIG_USB_MUSB_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-inet-86vs" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/jesurun_q5_defconfig b/configs/jesurun_q5_defconfig index 86be75c..da41bff 100644 --- a/configs/jesurun_q5_defconfig +++ b/configs/jesurun_q5_defconfig @@ -5,5 +5,3 @@ CONFIG_DRAM_CLK=312 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-jesurun-q5" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI,MACPWR=SUNXI_GPH(19)" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/mixtile_loftq_defconfig b/configs/mixtile_loftq_defconfig index 7d3d6bb..5c60634 100644 --- a/configs/mixtile_loftq_defconfig +++ b/configs/mixtile_loftq_defconfig @@ -8,7 +8,5 @@ CONFIG_USB2_VBUS_PIN="" CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mixtile-loftq" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP221_ALDO1_VOLT=3300 diff --git a/configs/mk802_a10s_defconfig b/configs/mk802_a10s_defconfig index 1c3897b..4994936 100644 --- a/configs/mk802_a10s_defconfig +++ b/configs/mk802_a10s_defconfig @@ -7,5 +7,3 @@ CONFIG_USB1_VBUS_PIN="PB10" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-mk802" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/mk802_defconfig b/configs/mk802_defconfig index 96252de..1a9a361 100644 --- a/configs/mk802_defconfig +++ b/configs/mk802_defconfig @@ -5,5 +5,3 @@ CONFIG_USB2_VBUS_PIN="PH12" CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/mk802ii_defconfig b/configs/mk802ii_defconfig index 1d297ac..3850fba 100644 --- a/configs/mk802ii_defconfig +++ b/configs/mk802ii_defconfig @@ -4,5 +4,3 @@ CONFIG_MACH_SUN4I=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802ii" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/r7-tv-dongle_defconfig b/configs/r7-tv-dongle_defconfig index 49ba7e1..bc1657d 100644 --- a/configs/r7-tv-dongle_defconfig +++ b/configs/r7-tv-dongle_defconfig @@ -6,5 +6,3 @@ CONFIG_USB1_VBUS_PIN="PG13" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-r7-tv-dongle" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y diff --git a/configs/sunxi_Gemei_G9_defconfig b/configs/sunxi_Gemei_G9_defconfig index e96eb65..35aa847 100644 --- a/configs/sunxi_Gemei_G9_defconfig +++ b/configs/sunxi_Gemei_G9_defconfig @@ -11,5 +11,3 @@ CONFIG_VIDEO_LCD_PANEL_LVDS=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-gemei-g9" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI" -CONFIG_CMD_SETEXPR=y -CONFIG_CMD_NET=y -- cgit v0.10.2