From 15b505b0553da2d8a99ae5c1d14968e87f5c6bef Mon Sep 17 00:00:00 2001 From: Sven Ebenfeld Date: Sun, 6 Nov 2016 16:37:55 +0100 Subject: arm: imx: add HAB authentication of image to SPL boot When using HAB as secure boot mechanism on Wandboard, the chain of trust breaks immediately after the SPL. As this is not checking the authenticity of the loaded image before jumping to it. The HAB status output will not be implemented in SPL as it adds a lot of strings that are only required in debug cases. With those it exceeds the maximum size of the available OCRAM (69 KiB). The SPL MISC driver support must be enabled, so that the driver can use OTP fuse to check if HAB is enabled. Cc: sbabic@denx.de v2-Changes: None Signed-off-by: Sven Ebenfeld Reviewed-by: George McCollister Tested-by: George McCollister diff --git a/arch/arm/imx-common/hab.c b/arch/arm/imx-common/hab.c index 6731825..7449487 100644 --- a/arch/arm/imx-common/hab.c +++ b/arch/arm/imx-common/hab.c @@ -110,6 +110,10 @@ * +------------+ + CSF_PAD_SIZE */ +static bool is_hab_enabled(void); + +#if !defined(CONFIG_SPL_BUILD) + #define MAX_RECORD_BYTES (8*1024) /* 4 kbytes */ struct record { @@ -257,22 +261,6 @@ uint8_t hab_engines[16] = { -1 }; -bool is_hab_enabled(void) -{ - struct imx_sec_config_fuse_t *fuse = - (struct imx_sec_config_fuse_t *)&imx_sec_config_fuse; - uint32_t reg; - int ret; - - ret = fuse_read(fuse->bank, fuse->word, ®); - if (ret) { - puts("\nSecure boot fuse read error\n"); - return ret; - } - - return (reg & IS_HAB_ENABLED_BIT) == IS_HAB_ENABLED_BIT; -} - static inline uint8_t get_idx(uint8_t *list, uint8_t tgt) { uint8_t idx = 0; @@ -359,6 +347,68 @@ int get_hab_status(void) return 0; } +int do_hab_status(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + if ((argc != 1)) { + cmd_usage(cmdtp); + return 1; + } + + get_hab_status(); + + return 0; +} + +static int do_authenticate_image(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + ulong addr, ivt_offset; + int rcode = 0; + + if (argc < 3) + return CMD_RET_USAGE; + + addr = simple_strtoul(argv[1], NULL, 16); + ivt_offset = simple_strtoul(argv[2], NULL, 16); + + rcode = authenticate_image(addr, ivt_offset); + + return rcode; +} + +U_BOOT_CMD( + hab_status, CONFIG_SYS_MAXARGS, 1, do_hab_status, + "display HAB status", + "" + ); + +U_BOOT_CMD( + hab_auth_img, 3, 0, do_authenticate_image, + "authenticate image via HAB", + "addr ivt_offset\n" + "addr - image hex address\n" + "ivt_offset - hex offset of IVT in the image" + ); + + +#endif /* !defined(CONFIG_SPL_BUILD) */ + +static bool is_hab_enabled(void) +{ + struct imx_sec_config_fuse_t *fuse = + (struct imx_sec_config_fuse_t *)&imx_sec_config_fuse; + uint32_t reg; + int ret; + + ret = fuse_read(fuse->bank, fuse->word, ®); + if (ret) { + puts("\nSecure boot fuse read error\n"); + return ret; + } + + return (reg & IS_HAB_ENABLED_BIT) == IS_HAB_ENABLED_BIT; +} + uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size) { uint32_t load_addr = 0; @@ -400,7 +450,9 @@ uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size) (void *)(ddr_start + ivt_offset+IVT_SIZE), 4, 0x10, 0); +#if !defined(CONFIG_SPL_BUILD) get_hab_status(); +#endif puts("\nCalling authenticate_image in ROM\n"); printf("\tivt_offset = 0x%x\n", ivt_offset); @@ -449,7 +501,9 @@ uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size) hab_caam_clock_enable(0); +#if !defined(CONFIG_SPL_BUILD) get_hab_status(); +#endif } else { puts("hab fuse not enabled\n"); } @@ -459,46 +513,3 @@ uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size) return result; } - -int do_hab_status(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - if ((argc != 1)) { - cmd_usage(cmdtp); - return 1; - } - - get_hab_status(); - - return 0; -} - -static int do_authenticate_image(cmd_tbl_t *cmdtp, int flag, int argc, - char * const argv[]) -{ - ulong addr, ivt_offset; - int rcode = 0; - - if (argc < 3) - return CMD_RET_USAGE; - - addr = simple_strtoul(argv[1], NULL, 16); - ivt_offset = simple_strtoul(argv[2], NULL, 16); - - rcode = authenticate_image(addr, ivt_offset); - - return rcode; -} - -U_BOOT_CMD( - hab_status, CONFIG_SYS_MAXARGS, 1, do_hab_status, - "display HAB status", - "" - ); - -U_BOOT_CMD( - hab_auth_img, 3, 0, do_authenticate_image, - "authenticate image via HAB", - "addr ivt_offset\n" - "addr - image hex address\n" - "ivt_offset - hex offset of IVT in the image" - ); diff --git a/arch/arm/imx-common/spl.c b/arch/arm/imx-common/spl.c index bdcda7d..c86b6f8 100644 --- a/arch/arm/imx-common/spl.c +++ b/arch/arm/imx-common/spl.c @@ -12,6 +12,7 @@ #include #include #include +#include #if defined(CONFIG_MX6) /* determine boot device from SRC_SBMR1 (BOOT_CFG[4:1]) or SRC_GPR9 register */ @@ -90,3 +91,27 @@ u32 spl_boot_mode(const u32 boot_device) } } #endif + +#if defined(CONFIG_SECURE_BOOT) + +__weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) +{ + typedef void __noreturn (*image_entry_noargs_t)(void); + + image_entry_noargs_t image_entry = + (image_entry_noargs_t)(unsigned long)spl_image->entry_point; + + debug("image entry point: 0x%X\n", spl_image->entry_point); + + /* HAB looks for the CSF at the end of the authenticated data therefore, + * we need to subtract the size of the CSF from the actual filesize */ + if (authenticate_image(spl_image->load_addr, + spl_image->size - CONFIG_CSF_SIZE)) { + image_entry(); + } else { + puts("spl: ERROR: image authentication unsuccessful\n"); + hang(); + } +} + +#endif diff --git a/arch/arm/imx-common/spl_sd.cfg b/arch/arm/imx-common/spl_sd.cfg index 5fc3e8a..14c135c 100644 --- a/arch/arm/imx-common/spl_sd.cfg +++ b/arch/arm/imx-common/spl_sd.cfg @@ -4,5 +4,15 @@ * SPDX-License-Identifier: GPL-2.0+ */ +#define __ASSEMBLY__ +#include + IMAGE_VERSION 2 BOOT_FROM sd + +/* + * Secure boot support + */ +#ifdef CONFIG_SECURE_BOOT +CSF CONFIG_CSF_SIZE +#endif \ No newline at end of file diff --git a/arch/arm/include/asm/imx-common/hab.h b/arch/arm/include/asm/imx-common/hab.h index dab6789..e0ff459 100644 --- a/arch/arm/include/asm/imx-common/hab.h +++ b/arch/arm/include/asm/imx-common/hab.h @@ -145,4 +145,6 @@ typedef void hapi_clock_init_t(void); /* ----------- end of HAB API updates ------------*/ +uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size); + #endif diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index 3bb939e..6e9b871 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -98,6 +98,9 @@ #define CONFIG_FSL_CAAM #define CONFIG_CMD_DEKBLOB #define CONFIG_SYS_FSL_SEC_LE +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SPL_DRIVERS_MISC_SUPPORT +#endif #endif #endif -- cgit v0.10.2