From e5322df4e7dda98f70da78cc49bc13db93b89c91 Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Wed, 3 Feb 2016 10:16:47 +0800 Subject: ARM: at91: asm/at91_pmc.h: fix trival register offset MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Remove unnecessary #ifdef CPU_HAS_PCR. Signed-off-by: Wenyou Yang Tested-by: Heiko Schocher Reviewed-by: Andreas Bießmann diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index 3f50f77..eb40194 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -51,19 +51,15 @@ typedef struct at91_pmc { u32 imr; /* 0x6C Interrupt Mask Register */ u32 reserved4[4]; u32 pllicpr; /* 0x80 Change Pump Current Register (SAM9) */ - u32 reserved5[21]; + u32 reserved5[24]; u32 wpmr; /* 0xE4 Write Protect Mode Register (CAP0) */ u32 wpsr; /* 0xE8 Write Protect Status Register (CAP0) */ -#ifdef CPU_HAS_PCR - u32 reserved6[8]; + u32 reserved6[5]; u32 pcer1; /* 0x100 Periperial Clock Enable Register 1 */ u32 pcdr1; /* 0x104 Periperial Clock Disable Register 1 */ u32 pcsr1; /* 0x108 Periperial Clock Status Register 1 */ u32 pcr; /* 0x10c Periperial Control Register */ u32 ocr; /* 0x110 Oscillator Calibration Register */ -#else - u32 reserved8[5]; -#endif } at91_pmc_t; #endif /* end not assembly */ -- cgit v0.10.2 From 41bf25c2e1c134455257f91bbfa9dc582b687bc4 Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Wed, 3 Feb 2016 10:16:48 +0800 Subject: ARM: at91: clock: add a new file to handle clock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To reduce the duplicated code, add a new file to accommodate the peripheral's and system's clock handle code, shared with the SoCs with different ARM core. Signed-off-by: Wenyou Yang Tested-by: Heiko Schocher Reviewed-by: Andreas Bießmann diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index abd1d13..4424523 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_SAMA5D4) += mpddrc.o spl_atmel.o matrix.o atmel_sfr.o obj-y += spl.o endif +obj-y += clock.o obj-$(CONFIG_CPU_ARM920T) += arm920t/ obj-$(CONFIG_CPU_ARM926EJS) += arm926ejs/ obj-$(CONFIG_CPU_V7) += armv7/ diff --git a/arch/arm/mach-at91/arm926ejs/clock.c b/arch/arm/mach-at91/arm926ejs/clock.c index 8d6934e..c8b5e10 100644 --- a/arch/arm/mach-at91/arm926ejs/clock.c +++ b/arch/arm/mach-at91/arm926ejs/clock.c @@ -242,10 +242,3 @@ void at91_mck_init(u32 mckr) while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY)) ; } - -void at91_periph_clk_enable(int id) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - writel(1 << id, &pmc->pcer); -} diff --git a/arch/arm/mach-at91/armv7/clock.c b/arch/arm/mach-at91/armv7/clock.c index 41dbf16..81e9f69 100644 --- a/arch/arm/mach-at91/armv7/clock.c +++ b/arch/arm/mach-at91/armv7/clock.c @@ -150,32 +150,6 @@ void at91_mck_init(u32 mckr) ; } -void at91_periph_clk_enable(int id) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - u32 regval; - - if (id > AT91_PMC_PCR_PID_MASK) - return; - - regval = AT91_PMC_PCR_EN | AT91_PMC_PCR_CMD_WRITE | id; - - writel(regval, &pmc->pcr); -} - -void at91_periph_clk_disable(int id) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - u32 regval; - - if (id > AT91_PMC_PCR_PID_MASK) - return; - - regval = AT91_PMC_PCR_CMD_WRITE | id; - - writel(regval, &pmc->pcr); -} - int at91_enable_periph_generated_clk(u32 id, u32 clk_source, u32 div) { struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c new file mode 100644 index 0000000..2a0308f --- /dev/null +++ b/arch/arm/mach-at91/clock.c @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2015 Atmel Corporation + * Wenyou Yang + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +void at91_periph_clk_enable(int id) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + +#ifdef CPU_HAS_PCR + u32 regval; + u32 div_value; + + if (id > AT91_PMC_PCR_PID_MASK) + return; + + writel(id, &pmc->pcr); + + div_value = readl(&pmc->pcr) & AT91_PMC_PCR_DIV; + + regval = AT91_PMC_PCR_EN | AT91_PMC_PCR_CMD_WRITE | id | div_value; + + writel(regval, &pmc->pcr); +#else + writel(0x01 << id, &pmc->pcer); +#endif +} + +void at91_periph_clk_disable(int id) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + +#ifdef CPU_HAS_PCR + u32 regval; + + if (id > AT91_PMC_PCR_PID_MASK) + return; + + regval = AT91_PMC_PCR_CMD_WRITE | id; + + writel(regval, &pmc->pcr); +#else + writel(0x01 << id, &pmc->pcdr); +#endif +} + +void at91_system_clk_enable(int sys_clk) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + writel(sys_clk, &pmc->scer); +} + +void at91_system_clk_disable(int sys_clk) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + writel(sys_clk, &pmc->scdr); +} diff --git a/arch/arm/mach-at91/include/mach/clk.h b/arch/arm/mach-at91/include/mach/clk.h index ad83927..bef4e1c 100644 --- a/arch/arm/mach-at91/include/mach/clk.h +++ b/arch/arm/mach-at91/include/mach/clk.h @@ -128,5 +128,7 @@ void at91_periph_clk_enable(int id); void at91_periph_clk_disable(int id); int at91_enable_periph_generated_clk(u32 id, u32 clk_source, u32 div); u32 at91_get_periph_generated_clk(u32 id); +void at91_system_clk_enable(int sys_clk); +void at91_system_clk_disable(int sys_clk); #endif /* __ASM_ARM_ARCH_CLK_H__ */ -- cgit v0.10.2 From eced5a7eb4750e16dd571a9bd4980c68d2276f11 Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Wed, 3 Feb 2016 10:16:49 +0800 Subject: ARM: cpu: at91: clean up peripheral clock code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Due to introducing the new peripheral clock handle functions, use these functions to clean up the duplicated code. Meanwhile, remove unneeded header file include, at91_pmc.h. Signed-off-by: Wenyou Yang Tested-by: Heiko Schocher Reviewed-by: Andreas Bießmann [fixup for arm920t code] Signed-off-by: Andreas Bießmann diff --git a/arch/arm/mach-at91/arm920t/at91rm9200_devices.c b/arch/arm/mach-at91/arm920t/at91rm9200_devices.c index fc54327..9b9800a 100644 --- a/arch/arm/mach-at91/arm920t/at91rm9200_devices.c +++ b/arch/arm/mach-at91/arm920t/at91rm9200_devices.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include /* @@ -34,29 +34,23 @@ void at91_serial0_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 17, 1); /* TXD0 */ at91_set_a_periph(AT91_PIO_PORTA, 18, PUP); /* RXD0 */ - writel(1 << ATMEL_ID_USART0, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_USART0); } void at91_serial1_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTB, 20, PUP); /* RXD1 */ at91_set_a_periph(AT91_PIO_PORTB, 21, 1); /* TXD1 */ - writel(1 << ATMEL_ID_USART1, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_USART1); } void at91_serial2_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 22, PUP); /* RXD2 */ at91_set_a_periph(AT91_PIO_PORTA, 23, 1); /* TXD2 */ - writel(1 << ATMEL_ID_USART2, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_USART2); } void at91_seriald_hw_init(void) diff --git a/arch/arm/mach-at91/arm920t/timer.c b/arch/arm/mach-at91/arm920t/timer.c index 6aa2994..69ce6f9 100644 --- a/arch/arm/mach-at91/arm920t/timer.c +++ b/arch/arm/mach-at91/arm920t/timer.c @@ -19,7 +19,7 @@ #include #include #include -#include +#include DECLARE_GLOBAL_DATA_PTR; @@ -29,10 +29,8 @@ DECLARE_GLOBAL_DATA_PTR; int timer_init(void) { at91_tc_t *tc = (at91_tc_t *) ATMEL_BASE_TC; - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - /* enables TC1.0 clock */ - writel(1 << ATMEL_ID_TC0, &pmc->pcer); /* enable clock */ + at91_periph_clk_enable(ATMEL_ID_TC0); writel(0, &tc->bcr); writel(AT91_TC_BMR_TC0XC0S_NONE | AT91_TC_BMR_TC1XC1S_NONE | diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c index 5e0c0f5..912a966 100644 --- a/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c +++ b/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c @@ -11,8 +11,8 @@ #include #include #include -#include #include +#include #include /* @@ -32,51 +32,40 @@ void at91_serial0_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTB, 4, 1); /* TXD0 */ at91_set_a_periph(AT91_PIO_PORTB, 5, PUP); /* RXD0 */ - writel(1 << ATMEL_ID_USART0, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_USART0); } void at91_serial1_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTB, 6, 1); /* TXD1 */ at91_set_a_periph(AT91_PIO_PORTB, 7, PUP); /* RXD1 */ - writel(1 << ATMEL_ID_USART1, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_USART1); } void at91_serial2_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTB, 8, 1); /* TXD2 */ at91_set_a_periph(AT91_PIO_PORTB, 9, PUP); /* RXD2 */ - writel(1 << ATMEL_ID_USART2, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_USART2); } void at91_seriald_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* DRXD */ at91_set_a_periph(AT91_PIO_PORTB, 15, 1); /* DTXD */ - writel(1 << ATMEL_ID_SYS, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_SYS); } #if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI) void at91_spi0_hw_init(unsigned long cs_mask) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */ at91_set_a_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */ at91_set_a_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */ - /* Enable clock */ - writel(1 << ATMEL_ID_SPI0, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_SPI0); if (cs_mask & (1 << 0)) { at91_set_a_periph(AT91_PIO_PORTA, 3, 1); @@ -106,14 +95,11 @@ void at91_spi0_hw_init(unsigned long cs_mask) void at91_spi1_hw_init(unsigned long cs_mask) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTB, 0, PUP); /* SPI1_MISO */ at91_set_a_periph(AT91_PIO_PORTB, 1, PUP); /* SPI1_MOSI */ at91_set_a_periph(AT91_PIO_PORTB, 2, PUP); /* SPI1_SPCK */ - /* Enable clock */ - writel(1 << ATMEL_ID_SPI1, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_SPI1); if (cs_mask & (1 << 0)) { at91_set_a_periph(AT91_PIO_PORTB, 3, 1); @@ -145,9 +131,7 @@ void at91_spi1_hw_init(unsigned long cs_mask) #ifdef CONFIG_MACB void at91_macb_hw_init(void) { - /* Enable EMAC clock */ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_EMAC0); at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* ETXCK_EREFCK */ at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* ERXDV */ @@ -190,9 +174,7 @@ void at91_macb_hw_init(void) #if defined(CONFIG_GENERIC_ATMEL_MCI) void at91_mci_hw_init(void) { - /* Enable mci clock */ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - writel(1 << ATMEL_ID_MCI, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_MCI); at91_set_a_periph(AT91_PIO_PORTA, 8, 1); /* MCCK */ #if defined(CONFIG_ATMEL_MCI_PORTB) diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c index a445c75..4bd4e75 100644 --- a/arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c +++ b/arch/arm/mach-at91/arm926ejs/at91sam9261_devices.c @@ -9,7 +9,7 @@ #include #include #include -#include +#include #include /* @@ -29,51 +29,40 @@ void at91_serial0_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTC, 8, 1); /* TXD0 */ at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* RXD0 */ - writel(1 << ATMEL_ID_USART0, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_USART0); } void at91_serial1_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTC, 12, 1); /* TXD1 */ at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* RXD1 */ - writel(1 << ATMEL_ID_USART1, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_USART1); } void at91_serial2_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTC, 14, 1); /* TXD2 */ at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* RXD2 */ - writel(1 << ATMEL_ID_USART2, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_USART2); } void at91_seriald_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */ at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */ - writel(1 << ATMEL_ID_SYS, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_SYS); } #if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI) void at91_spi0_hw_init(unsigned long cs_mask) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */ at91_set_a_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */ at91_set_a_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */ - /* Enable clock */ - writel(1 << ATMEL_ID_SPI0, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_SPI0); if (cs_mask & (1 << 0)) { at91_set_a_periph(AT91_PIO_PORTA, 3, 1); @@ -103,14 +92,11 @@ void at91_spi0_hw_init(unsigned long cs_mask) void at91_spi1_hw_init(unsigned long cs_mask) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTB, 30, PUP); /* SPI1_MISO */ at91_set_a_periph(AT91_PIO_PORTB, 31, PUP); /* SPI1_MOSI */ at91_set_a_periph(AT91_PIO_PORTB, 29, PUP); /* SPI1_SPCK */ - /* Enable clock */ - writel(1 << ATMEL_ID_SPI1, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_SPI1); if (cs_mask & (1 << 0)) { at91_set_a_periph(AT91_PIO_PORTB, 28, 1); diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9263_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9263_devices.c index 6b51d5f..f3f4800 100644 --- a/arch/arm/mach-at91/arm926ejs/at91sam9263_devices.c +++ b/arch/arm/mach-at91/arm926ejs/at91sam9263_devices.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include /* @@ -33,51 +33,40 @@ void at91_serial0_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 26, 1); /* TXD0 */ at91_set_a_periph(AT91_PIO_PORTA, 27, PUP); /* RXD0 */ - writel(1 << ATMEL_ID_USART0, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_USART0); } void at91_serial1_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* TXD1 */ at91_set_a_periph(AT91_PIO_PORTD, 1, PUP); /* RXD1 */ - writel(1 << ATMEL_ID_USART1, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_USART1); } void at91_serial2_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* TXD2 */ at91_set_a_periph(AT91_PIO_PORTD, 3, PUP); /* RXD2 */ - writel(1 << ATMEL_ID_USART2, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_USART2); } void at91_seriald_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTC, 30, PUP); /* DRXD */ at91_set_a_periph(AT91_PIO_PORTC, 31, 1); /* DTXD */ - writel(1 << ATMEL_ID_SYS, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_SYS); } #if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI) void at91_spi0_hw_init(unsigned long cs_mask) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_b_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */ at91_set_b_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */ at91_set_b_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */ - /* Enable clock */ - writel(1 << ATMEL_ID_SPI0, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_SPI0); if (cs_mask & (1 << 0)) { at91_set_b_periph(AT91_PIO_PORTA, 5, 1); @@ -107,14 +96,11 @@ void at91_spi0_hw_init(unsigned long cs_mask) void at91_spi1_hw_init(unsigned long cs_mask) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTB, 12, PUP); /* SPI1_MISO */ at91_set_a_periph(AT91_PIO_PORTB, 13, PUP); /* SPI1_MOSI */ at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* SPI1_SPCK */ - /* Enable clock */ - writel(1 << ATMEL_ID_SPI1, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_SPI1); if (cs_mask & (1 << 0)) { at91_set_a_periph(AT91_PIO_PORTB, 15, 1); @@ -146,9 +132,7 @@ void at91_spi1_hw_init(unsigned long cs_mask) #if defined(CONFIG_GENERIC_ATMEL_MCI) void at91_mci_hw_init(void) { - /* Enable mci clock */ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - writel(1 << ATMEL_ID_MCI1, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_MCI1); at91_set_a_periph(AT91_PIO_PORTA, 6, PUP); /* MCI1_CK */ @@ -207,12 +191,9 @@ void at91_uhp_hw_init(void) #ifdef CONFIG_AT91_CAN void at91_can_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* CAN_TX */ at91_set_a_periph(AT91_PIO_PORTA, 14, 1); /* CAN_RX */ - /* Enable clock */ - writel(1 << ATMEL_ID_CAN, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_CAN); } #endif diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c index 0e6c0da..0d83426 100644 --- a/arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c +++ b/arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c @@ -8,7 +8,7 @@ #include #include -#include +#include #include #include @@ -29,51 +29,40 @@ void at91_serial0_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTB, 19, 1); /* TXD0 */ at91_set_a_periph(AT91_PIO_PORTB, 18, PUP); /* RXD0 */ - writel(1 << ATMEL_ID_USART0, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_USART0); } void at91_serial1_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTB, 4, 1); /* TXD1 */ at91_set_a_periph(AT91_PIO_PORTB, 5, PUP); /* RXD1 */ - writel(1 << ATMEL_ID_USART1, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_USART1); } void at91_serial2_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTD, 6, 1); /* TXD2 */ at91_set_a_periph(AT91_PIO_PORTD, 7, PUP); /* RXD2 */ - writel(1 << ATMEL_ID_USART2, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_USART2); } void at91_seriald_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* DRXD */ at91_set_a_periph(AT91_PIO_PORTB, 13, 1); /* DTXD */ - writel(1 << ATMEL_ID_SYS, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_SYS); } #if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI) void at91_spi0_hw_init(unsigned long cs_mask) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTB, 0, PUP); /* SPI0_MISO */ at91_set_a_periph(AT91_PIO_PORTB, 1, PUP); /* SPI0_MOSI */ at91_set_a_periph(AT91_PIO_PORTB, 2, PUP); /* SPI0_SPCK */ - /* Enable clock */ - writel(1 << ATMEL_ID_SPI0, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_SPI0); if (cs_mask & (1 << 0)) { at91_set_a_periph(AT91_PIO_PORTB, 3, 1); @@ -103,14 +92,11 @@ void at91_spi0_hw_init(unsigned long cs_mask) void at91_spi1_hw_init(unsigned long cs_mask) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* SPI1_MISO */ at91_set_a_periph(AT91_PIO_PORTB, 15, PUP); /* SPI1_MOSI */ at91_set_a_periph(AT91_PIO_PORTB, 16, PUP); /* SPI1_SPCK */ - /* Enable clock */ - writel(1 << ATMEL_ID_SPI1, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_SPI1); if (cs_mask & (1 << 0)) { at91_set_a_periph(AT91_PIO_PORTB, 17, 1); @@ -169,8 +155,6 @@ void at91_macb_hw_init(void) #ifdef CONFIG_GENERIC_ATMEL_MCI void at91_mci_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* MCI0 CLK */ at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* MCI0 CDA */ at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* MCI0 DA0 */ @@ -178,7 +162,6 @@ void at91_mci_hw_init(void) at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* MCI0 DA2 */ at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* MCI0 DA3 */ - /* Enable clock */ - writel(1 << ATMEL_ID_MCI0, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_MCI0); } #endif diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c index 39f17a1..a03abfc 100644 --- a/arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c +++ b/arch/arm/mach-at91/arm926ejs/at91sam9n12_devices.c @@ -8,8 +8,8 @@ #include #include #include -#include #include +#include unsigned int has_lcdc() { @@ -18,60 +18,47 @@ unsigned int has_lcdc() void at91_serial0_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 0, 1); /* TXD0 */ at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* RXD0 */ - writel(1 << ATMEL_ID_USART0, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_USART0); } void at91_serial1_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 5, 1); /* TXD1 */ at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* RXD1 */ - writel(1 << ATMEL_ID_USART1, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_USART1); } void at91_serial2_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* TXD2 */ at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* RXD2 */ - writel(1 << ATMEL_ID_USART2, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_USART2); } void at91_serial3_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - at91_set_b_periph(AT91_PIO_PORTC, 22, 1); /* TXD3 */ at91_set_b_periph(AT91_PIO_PORTC, 23, 0); /* RXD3 */ - writel(1 << ATMEL_ID_USART3, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_USART3); } void at91_seriald_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */ at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */ - writel(1 << ATMEL_ID_SYS, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_SYS); } #ifdef CONFIG_ATMEL_SPI void at91_spi0_hw_init(unsigned long cs_mask) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SPI0_MISO */ at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* SPI0_MOSI */ at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SPI0_SPCK */ - /* Enable clock */ - writel(1 << ATMEL_ID_SPI0, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_SPI0); if (cs_mask & (1 << 0)) at91_set_pio_output(AT91_PIO_PORTA, 14, 1); @@ -85,14 +72,11 @@ void at91_spi0_hw_init(unsigned long cs_mask) void at91_spi1_hw_init(unsigned long cs_mask) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - at91_set_b_periph(AT91_PIO_PORTA, 21, 0); /* SPI1_MISO */ at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* SPI1_MOSI */ at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* SPI1_SPCK */ - /* Enable clock */ - writel(1 << ATMEL_ID_SPI1, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_SPI1); if (cs_mask & (1 << 0)) at91_set_pio_output(AT91_PIO_PORTA, 8, 1); @@ -107,8 +91,6 @@ void at91_spi1_hw_init(unsigned long cs_mask) void at91_mci_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* MCCK */ at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* MCCDA */ at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* MCDA0 */ @@ -116,14 +98,12 @@ void at91_mci_hw_init(void) at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* MCDA2 */ at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* MCDA3 */ - writel(1 << ATMEL_ID_HSMCI0, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_HSMCI0); } #ifdef CONFIG_LCD void at91_lcd_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDPWR */ at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDVSYNC */ at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDHSYNC */ @@ -156,6 +136,6 @@ void at91_lcd_hw_init(void) at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */ at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */ - writel(1 << ATMEL_ID_LCDC, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_LCDC); } #endif diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9rl_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9rl_devices.c index 857c864..dbf9386 100644 --- a/arch/arm/mach-at91/arm926ejs/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/arm926ejs/at91sam9rl_devices.c @@ -9,7 +9,7 @@ #include #include #include -#include +#include #include /* @@ -29,51 +29,40 @@ void at91_serial0_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 6, 1); /* TXD0 */ at91_set_a_periph(AT91_PIO_PORTA, 7, PUP); /* RXD0 */ - writel(1 << ATMEL_ID_USART0, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_USART0); } void at91_serial1_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 11, 1); /* TXD1 */ at91_set_a_periph(AT91_PIO_PORTA, 12, PUP); /* RXD1 */ - writel(1 << ATMEL_ID_USART1, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_USART1); } void at91_serial2_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 13, 1); /* TXD2 */ at91_set_a_periph(AT91_PIO_PORTA, 14, PUP); /* RXD2 */ - writel(1 << ATMEL_ID_USART2, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_USART2); } void at91_seriald_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 21, PUP); /* DRXD */ at91_set_a_periph(AT91_PIO_PORTA, 22, 1); /* DTXD */ - writel(1 << ATMEL_ID_SYS, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_SYS); } #if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI) void at91_spi0_hw_init(unsigned long cs_mask) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 25, PUP); /* SPI0_MISO */ at91_set_a_periph(AT91_PIO_PORTA, 26, PUP); /* SPI0_MOSI */ at91_set_a_periph(AT91_PIO_PORTA, 27, PUP); /* SPI0_SPCK */ - /* Enable clock */ - writel(1 << ATMEL_ID_SPI, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_SPI); if (cs_mask & (1 << 0)) { at91_set_a_periph(AT91_PIO_PORTA, 28, 1); @@ -105,8 +94,6 @@ void at91_spi0_hw_init(unsigned long cs_mask) #ifdef CONFIG_GENERIC_ATMEL_MCI void at91_mci_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* MCI CLK */ at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* MCI CDA */ at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* MCI DA0 */ @@ -114,7 +101,6 @@ void at91_mci_hw_init(void) at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* MCI DA2 */ at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* MCI DA3 */ - /* Enable clock */ - writel(1 << ATMEL_ID_MCI, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_MCI); } #endif diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c index 6d94572..3e4555a 100644 --- a/arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c +++ b/arch/arm/mach-at91/arm926ejs/at91sam9x5_devices.c @@ -6,7 +6,7 @@ #include #include -#include +#include #include #include @@ -64,42 +64,34 @@ char *get_cpu_name() void at91_seriald_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */ at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */ - writel(1 << ATMEL_ID_SYS, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_SYS); } void at91_serial0_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 0, 1); /* TXD */ at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* RXD */ - writel(1 << ATMEL_ID_USART0, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_USART0); } void at91_serial1_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 5, 1); /* TXD */ at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* RXD */ - writel(1 << ATMEL_ID_USART1, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_USART1); } void at91_serial2_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* TXD */ at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* RXD */ - writel(1 << ATMEL_ID_USART2, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_USART2); } void at91_mci_hw_init(void) @@ -112,22 +104,17 @@ void at91_mci_hw_init(void) at91_set_a_periph(AT91_PIO_PORTA, 19, 1); /* MCDA2 */ at91_set_a_periph(AT91_PIO_PORTA, 20, 1); /* MCDA3 */ - /* Enable clock for MCI0 */ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - writel(1 << ATMEL_ID_HSMCI0, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_HSMCI0); } #ifdef CONFIG_ATMEL_SPI void at91_spi0_hw_init(unsigned long cs_mask) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SPI0_MISO */ at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* SPI0_MOSI */ at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SPI0_SPCK */ - /* Enable clock */ - writel(1 << ATMEL_ID_SPI0, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_SPI0); if (cs_mask & (1 << 0)) at91_set_a_periph(AT91_PIO_PORTA, 14, 0); @@ -149,14 +136,11 @@ void at91_spi0_hw_init(unsigned long cs_mask) void at91_spi1_hw_init(unsigned long cs_mask) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_b_periph(AT91_PIO_PORTA, 21, 0); /* SPI1_MISO */ at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* SPI1_MOSI */ at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* SPI1_SPCK */ - /* Enable clock */ - writel(1 << ATMEL_ID_SPI1, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_SPI1); if (cs_mask & (1 << 0)) at91_set_b_periph(AT91_PIO_PORTA, 8, 0); @@ -193,11 +177,9 @@ void at91_uhp_hw_init(void) #ifdef CONFIG_MACB void at91_macb_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - if (has_emac0()) { /* Enable EMAC0 clock */ - writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_EMAC0); /* EMAC0 pins setup */ at91_set_a_periph(AT91_PIO_PORTB, 4, 0); /* ETXCK */ at91_set_a_periph(AT91_PIO_PORTB, 3, 0); /* ERXDV */ @@ -213,7 +195,7 @@ void at91_macb_hw_init(void) if (has_emac1()) { /* Enable EMAC1 clock */ - writel(1 << ATMEL_ID_EMAC1, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_EMAC1); /* EMAC1 pins setup */ at91_set_b_periph(AT91_PIO_PORTC, 29, 0); /* ETXCK */ at91_set_b_periph(AT91_PIO_PORTC, 28, 0); /* ECRSDV */ diff --git a/arch/arm/mach-at91/arm926ejs/cpu.c b/arch/arm/mach-at91/arm926ejs/cpu.c index 990c689..9b9f8af 100644 --- a/arch/arm/mach-at91/arm926ejs/cpu.c +++ b/arch/arm/mach-at91/arm926ejs/cpu.c @@ -10,7 +10,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arm/mach-at91/arm926ejs/timer.c b/arch/arm/mach-at91/arm926ejs/timer.c index 31ce646..c49d306 100644 --- a/arch/arm/mach-at91/arm926ejs/timer.c +++ b/arch/arm/mach-at91/arm926ejs/timer.c @@ -10,7 +10,6 @@ #include #include #include -#include #include #include @@ -38,11 +37,9 @@ DECLARE_GLOBAL_DATA_PTR; */ int timer_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; at91_pit_t *pit = (at91_pit_t *) ATMEL_BASE_PIT; - /* Enable PITC Clock */ - writel(1 << ATMEL_ID_SYS, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_SYS); /* Enable PITC */ writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr); diff --git a/arch/arm/mach-at91/armv7/cpu.c b/arch/arm/mach-at91/armv7/cpu.c index 7843aed..1865303 100644 --- a/arch/arm/mach-at91/armv7/cpu.c +++ b/arch/arm/mach-at91/armv7/cpu.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arm/mach-at91/armv7/timer.c b/arch/arm/mach-at91/armv7/timer.c index a4a3817..6f91e22 100644 --- a/arch/arm/mach-at91/armv7/timer.c +++ b/arch/arm/mach-at91/armv7/timer.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/mach-at91/phy.c b/arch/arm/mach-at91/phy.c index 2cba716..ddd70f5 100644 --- a/arch/arm/mach-at91/phy.c +++ b/arch/arm/mach-at91/phy.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/mach-at91/sdram.c b/arch/arm/mach-at91/sdram.c index 5758b06..1dfc74f 100644 --- a/arch/arm/mach-at91/sdram.c +++ b/arch/arm/mach-at91/sdram.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include -- cgit v0.10.2 From 70341e2ed9a0ff98a777febb7b56dbcee4d885c4 Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Wed, 3 Feb 2016 10:16:50 +0800 Subject: board: atmel: clean up peripheral clock code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Due to introducing the new peripheral clock handle functions, use these functions to reduce duplicated code. Signed-off-by: Wenyou Yang Tested-by: Heiko Schocher [Rebased on current master, fixup for at91rm9200ek] Signed-off-by: Andreas Bießmann diff --git a/board/atmel/at91rm9200ek/at91rm9200ek.c b/board/atmel/at91rm9200ek/at91rm9200ek.c index 64ab572..4ca8106 100644 --- a/board/atmel/at91rm9200ek/at91rm9200ek.c +++ b/board/atmel/at91rm9200ek/at91rm9200ek.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include diff --git a/board/atmel/at91rm9200ek/led.c b/board/atmel/at91rm9200ek/led.c index 6761b14..fbe8e3d 100644 --- a/board/atmel/at91rm9200ek/led.c +++ b/board/atmel/at91rm9200ek/led.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include #include @@ -59,11 +59,9 @@ void red_led_off(void) void coloured_LED_init (void) { - at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; at91_pio_t *pio = (at91_pio_t *)ATMEL_BASE_PIO; - /* Enable PIOB clock */ - writel(1 << ATMEL_ID_PIOB, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOB); /* Disable peripherals on LEDs */ writel(GREEN_LED | YELLOW_LED | RED_LED, &pio->piob.per); diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c index 7f14af1..98193bf 100644 --- a/board/atmel/at91sam9260ek/at91sam9260ek.c +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c @@ -11,7 +11,7 @@ #include #include #include -#include +#include #include #include @@ -70,11 +70,9 @@ static void at91sam9260ek_nand_hw_init(void) #ifdef CONFIG_MACB static void at91sam9260ek_macb_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; - /* Enable EMAC clock */ - writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_EMAC0); /* * Disable pull-up on: @@ -122,12 +120,9 @@ int board_mmc_init(bd_t *bd) int board_early_init_f(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - /* Enable clocks for all PIOs */ - writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) | - (1 << ATMEL_ID_PIOC), - &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOA); + at91_periph_clk_enable(ATMEL_ID_PIOB); + at91_periph_clk_enable(ATMEL_ID_PIOC); return 0; } diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c index 5250474..7b7cd2c 100644 --- a/board/atmel/at91sam9261ek/at91sam9261ek.c +++ b/board/atmel/at91sam9261ek/at91sam9261ek.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include @@ -35,7 +34,6 @@ static void at91sam9261ek_nand_hw_init(void) { struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; unsigned long csa; /* Enable CS3 */ @@ -74,7 +72,7 @@ static void at91sam9261ek_nand_hw_init(void) AT91_SMC_MODE_TDF_CYCLE(2), &smc->cs[3].mode); - writel(1 << ATMEL_ID_PIOC, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOC); /* Configure RDY/BSY */ at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); @@ -161,8 +159,6 @@ void lcd_disable(void) static void at91sam9261ek_lcd_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */ at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */ at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */ @@ -186,7 +182,7 @@ static void at91sam9261ek_lcd_hw_init(void) at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */ at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */ - writel(AT91_PMC_HCK1, &pmc->scer); + at91_system_clk_enable(AT91_PMC_HCK1); /* For 9G10EK, let U-Boot allocate the framebuffer in SDRAM */ #ifdef CONFIG_AT91SAM9261EK diff --git a/board/atmel/at91sam9261ek/led.c b/board/atmel/at91sam9261ek/led.c index 18a68d8..485d7ea 100644 --- a/board/atmel/at91sam9261ek/led.c +++ b/board/atmel/at91sam9261ek/led.c @@ -8,17 +8,15 @@ #include #include -#include #include #include +#include #include void coloured_LED_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - /* Enable clock */ - writel(ATMEL_ID_PIOA, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOA); at91_set_gpio_output(CONFIG_RED_LED, 1); at91_set_gpio_output(CONFIG_GREEN_LED, 1); diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c index 927adb0..af68e10 100644 --- a/board/atmel/at91sam9263ek/at91sam9263ek.c +++ b/board/atmel/at91sam9263ek/at91sam9263ek.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include #include @@ -39,7 +38,6 @@ static void at91sam9263ek_nand_hw_init(void) unsigned long csa; at91_smc_t *smc = (at91_smc_t *) ATMEL_BASE_SMC0; at91_matrix_t *matrix = (at91_matrix_t *) ATMEL_BASE_MATRIX; - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; /* Enable CS3 */ csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A; @@ -68,8 +66,8 @@ static void at91sam9263ek_nand_hw_init(void) AT91_SMC_MODE_TDF_CYCLE(2), &smc->cs[3].mode); - writel(1 << ATMEL_ID_PIOA | 1 << ATMEL_ID_PIOCDE, - &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOA); + at91_periph_clk_enable(ATMEL_ID_PIOCDE); /* Configure RDY/BSY */ at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); @@ -82,11 +80,9 @@ static void at91sam9263ek_nand_hw_init(void) #ifdef CONFIG_MACB static void at91sam9263ek_macb_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - /* Enable clock */ - writel(1 << ATMEL_ID_EMAC, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_EMAC); /* * Disable pull-up on: @@ -139,8 +135,6 @@ void lcd_disable(void) static void at91sam9263ek_lcd_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDHSYNC */ at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDDOTCK */ at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDDEN */ @@ -164,7 +158,7 @@ static void at91sam9263ek_lcd_hw_init(void) at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDD22 */ at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDD23 */ - writel(1 << ATMEL_ID_LCDC, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_LCDC); gd->fb_base = ATMEL_BASE_SRAM0; } @@ -226,12 +220,9 @@ int board_mmc_init(bd_t *bd) int board_early_init_f(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - /* Enable clocks for all PIOs */ - writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) | - (1 << ATMEL_ID_PIOCDE), - &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOA); + at91_periph_clk_enable(ATMEL_ID_PIOB); + at91_periph_clk_enable(ATMEL_ID_PIOCDE); at91_seriald_hw_init(); return 0; diff --git a/board/atmel/at91sam9263ek/led.c b/board/atmel/at91sam9263ek/led.c index e317d99..21d81de 100644 --- a/board/atmel/at91sam9263ek/led.c +++ b/board/atmel/at91sam9263ek/led.c @@ -9,16 +9,13 @@ #include #include #include -#include #include +#include void coloured_LED_init(void) { - /* Enable clock */ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - writel(1 << ATMEL_ID_PIOB | 1 << ATMEL_ID_PIOCDE, - &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOB); + at91_periph_clk_enable(ATMEL_ID_PIOB); at91_set_gpio_output(CONFIG_RED_LED, 1); at91_set_gpio_output(CONFIG_GREEN_LED, 1); diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c index 0a51fcd..4c64312 100644 --- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c +++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include @@ -36,7 +35,6 @@ void at91sam9m10g45ek_nand_hw_init(void) { struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; unsigned long csa; /* Enable CS3 */ @@ -63,7 +61,7 @@ void at91sam9m10g45ek_nand_hw_init(void) AT91_SMC_MODE_TDF_CYCLE(3), &smc->cs[3].mode); - writel(1 << ATMEL_ID_PIOC, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOC); /* Configure RDY/BSY */ at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); @@ -130,13 +128,11 @@ static void ddr2_conf(struct atmel_mpddrc_config *ddr2) void mem_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; struct atmel_mpddrc_config ddr2; ddr2_conf(&ddr2); - /* enable DDR2 clock */ - writel(AT91_PMC_DDR, &pmc->scer); + at91_system_clk_enable(AT91_PMC_DDR); /* DDRAM2 Controller initialize */ ddr2_init(ATMEL_BASE_DDRSDRC0, ATMEL_BASE_CS6, &ddr2); @@ -146,9 +142,7 @@ void mem_init(void) #ifdef CONFIG_CMD_USB static void at91sam9m10g45ek_usb_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - writel(1 << ATMEL_ID_PIODE, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIODE); at91_set_gpio_output(AT91_PIN_PD1, 0); at91_set_gpio_output(AT91_PIN_PD3, 0); @@ -158,11 +152,9 @@ static void at91sam9m10g45ek_usb_hw_init(void) #ifdef CONFIG_MACB static void at91sam9m10g45ek_macb_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; - /* Enable clock */ - writel(1 << ATMEL_ID_EMAC, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_EMAC); /* * Disable pull-up on: @@ -222,8 +214,6 @@ void lcd_disable(void) static void at91sam9m10g45ek_lcd_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */ at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */ at91_set_A_periph(AT91_PIN_PE3, 0); /* LCDVSYNC */ @@ -255,7 +245,7 @@ static void at91sam9m10g45ek_lcd_hw_init(void) at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */ at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */ - writel(1 << ATMEL_ID_LCDC, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_LCDC); gd->fb_base = CONFIG_AT91SAM9G45_LCD_BASE; } diff --git a/board/atmel/at91sam9m10g45ek/led.c b/board/atmel/at91sam9m10g45ek/led.c index fe98723..866052e 100644 --- a/board/atmel/at91sam9m10g45ek/led.c +++ b/board/atmel/at91sam9m10g45ek/led.c @@ -9,15 +9,12 @@ #include #include #include -#include +#include #include void coloured_LED_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - /* Enable clock */ - writel(1 << ATMEL_ID_PIODE, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIODE); at91_set_gpio_output(CONFIG_RED_LED, 1); at91_set_gpio_output(CONFIG_GREEN_LED, 1); diff --git a/board/atmel/at91sam9n12ek/at91sam9n12ek.c b/board/atmel/at91sam9n12ek/at91sam9n12ek.c index 0b0177d..d3555bb 100644 --- a/board/atmel/at91sam9n12ek/at91sam9n12ek.c +++ b/board/atmel/at91sam9n12ek/at91sam9n12ek.c @@ -10,7 +10,6 @@ #include #include #include -#include #include #include #include @@ -208,9 +207,8 @@ void at91sam9n12ek_usb_hw_init(void) int board_early_init_f(void) { - /* Enable clocks for all PIOs */ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - writel((1 << ATMEL_ID_PIOAB) | (1 << ATMEL_ID_PIOCD), &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOAB); + at91_periph_clk_enable(ATMEL_ID_PIOCD); at91_seriald_hw_init(); return 0; diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c index f995cef..9ef2864 100644 --- a/board/atmel/at91sam9rlek/at91sam9rlek.c +++ b/board/atmel/at91sam9rlek/at91sam9rlek.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include @@ -36,7 +35,6 @@ static void at91sam9rlek_nand_hw_init(void) { struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; unsigned long csa; /* Enable CS3 */ @@ -64,7 +62,7 @@ static void at91sam9rlek_nand_hw_init(void) AT91_SMC_MODE_TDF_CYCLE(2), &smc->cs[3].mode); - writel(1 << ATMEL_ID_PIOD, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOD); /* Configure RDY/BSY */ at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); @@ -106,8 +104,6 @@ void lcd_disable(void) } static void at91sam9rlek_lcd_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - at91_set_B_periph(AT91_PIN_PC1, 0); /* LCDPWR */ at91_set_A_periph(AT91_PIN_PC5, 0); /* LCDHSYNC */ at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDDOTCK */ @@ -130,7 +126,7 @@ static void at91sam9rlek_lcd_hw_init(void) at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */ at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */ - writel(1 << ATMEL_ID_LCDC, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_LCDC); } #ifdef CONFIG_LCD_INFO @@ -174,12 +170,10 @@ int board_mmc_init(bd_t *bis) int board_early_init_f(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - /* Enable clocks for all PIOs */ - writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) | - (1 << ATMEL_ID_PIOC) | (1 << ATMEL_ID_PIOD), - &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOA); + at91_periph_clk_enable(ATMEL_ID_PIOB); + at91_periph_clk_enable(ATMEL_ID_PIOC); + at91_periph_clk_enable(ATMEL_ID_PIOD); return 0; } diff --git a/board/atmel/at91sam9rlek/led.c b/board/atmel/at91sam9rlek/led.c index fede59c..d593aba 100644 --- a/board/atmel/at91sam9rlek/led.c +++ b/board/atmel/at91sam9rlek/led.c @@ -8,16 +8,13 @@ #include #include -#include +#include #include #include void coloured_LED_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - /* Enable clock */ - writel(ATMEL_ID_PIOD, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOD); at91_set_gpio_output(CONFIG_RED_LED, 1); at91_set_gpio_output(CONFIG_GREEN_LED, 1); diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c index 833e383..c14df30 100644 --- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c +++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c @@ -9,10 +9,9 @@ #include #include #include -#include #include -#include #include +#include #include #include #include @@ -39,7 +38,6 @@ static void at91sam9x5ek_nand_hw_init(void) { struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; unsigned long csa; /* Enable CS3 */ @@ -72,7 +70,7 @@ static void at91sam9x5ek_nand_hw_init(void) AT91_SMC_MODE_TDF_CYCLE(1), &smc->cs[3].mode); - writel(1 << ATMEL_ID_PIOCD, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOCD); /* Configure RDY/BSY */ at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); @@ -141,8 +139,6 @@ void lcd_disable(void) static void at91sam9x5ek_lcd_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - if (has_lcdc()) { at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDPWM */ at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDVSYNC */ @@ -176,7 +172,7 @@ static void at91sam9x5ek_lcd_hw_init(void) at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */ at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */ - writel(1 << ATMEL_ID_LCDC, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_LCDC); } } diff --git a/board/atmel/sama5d2_xplained/sama5d2_xplained.c b/board/atmel/sama5d2_xplained/sama5d2_xplained.c index 8ed01dd..10edf28 100644 --- a/board/atmel/sama5d2_xplained/sama5d2_xplained.c +++ b/board/atmel/sama5d2_xplained/sama5d2_xplained.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include diff --git a/board/atmel/sama5d3_xplained/sama5d3_xplained.c b/board/atmel/sama5d3_xplained/sama5d3_xplained.c index 7acb8d0..c8a5795 100644 --- a/board/atmel/sama5d3_xplained/sama5d3_xplained.c +++ b/board/atmel/sama5d3_xplained/sama5d3_xplained.c @@ -184,14 +184,13 @@ static void ddr2_conf(struct atmel_mpddrc_config *ddr2) void mem_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; struct atmel_mpddrc_config ddr2; ddr2_conf(&ddr2); - /* enable MPDDR clock */ + /* Enable MPDDR clock */ at91_periph_clk_enable(ATMEL_ID_MPDDRC); - writel(AT91_PMC_DDR, &pmc->scer); + at91_system_clk_enable(AT91_PMC_DDR); /* DDRAM2 Controller initialize */ ddr2_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddr2); diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c index 0d824fc..8576560 100644 --- a/board/atmel/sama5d3xek/sama5d3xek.c +++ b/board/atmel/sama5d3xek/sama5d3xek.c @@ -443,14 +443,13 @@ static void ddr2_conf(struct atmel_mpddrc_config *ddr2) void mem_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; struct atmel_mpddrc_config ddr2; ddr2_conf(&ddr2); - /* enable MPDDR clock */ + /* Enable MPDDR clock */ at91_periph_clk_enable(ATMEL_ID_MPDDRC); - writel(AT91_PMC_DDR, &pmc->scer); + at91_system_clk_enable(AT91_PMC_DDR); /* DDRAM2 Controller initialize */ ddr2_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddr2); diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c index e2f33a3..e154aa9 100644 --- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c +++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c @@ -383,14 +383,13 @@ static void ddr2_conf(struct atmel_mpddrc_config *ddr2) void mem_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; struct atmel_mpddrc_config ddr2; ddr2_conf(&ddr2); - /* enable MPDDR clock */ + /* Enable MPDDR clock */ at91_periph_clk_enable(ATMEL_ID_MPDDRC); - writel(AT91_PMC_DDR, &pmc->scer); + at91_system_clk_enable(AT91_PMC_DDR); /* DDRAM2 Controller initialize */ ddr2_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddr2); diff --git a/board/atmel/sama5d4ek/sama5d4ek.c b/board/atmel/sama5d4ek/sama5d4ek.c index 1799059..f174cf5 100644 --- a/board/atmel/sama5d4ek/sama5d4ek.c +++ b/board/atmel/sama5d4ek/sama5d4ek.c @@ -379,14 +379,13 @@ static void ddr2_conf(struct atmel_mpddrc_config *ddr2) void mem_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; struct atmel_mpddrc_config ddr2; ddr2_conf(&ddr2); - /* enable MPDDR clock */ + /* Enable MPDDR clock */ at91_periph_clk_enable(ATMEL_ID_MPDDRC); - writel(AT91_PMC_DDR, &pmc->scer); + at91_system_clk_enable(AT91_PMC_DDR); /* DDRAM2 Controller initialize */ ddr2_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddr2); diff --git a/board/bluewater/snapper9260/snapper9260.c b/board/bluewater/snapper9260/snapper9260.c index 95633b0..2d1a89e 100644 --- a/board/bluewater/snapper9260/snapper9260.c +++ b/board/bluewater/snapper9260/snapper9260.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include #include #include #include @@ -31,11 +31,9 @@ DECLARE_GLOBAL_DATA_PTR; static void macb_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; - /* Enable clock */ - writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_EMAC0); /* Disable pull-ups to prevent PHY going into test mode */ writel(pin_to_mask(AT91_PIN_PA14) | @@ -108,12 +106,9 @@ static void nand_hw_init(void) int board_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - /* Enable PIO clocks */ - writel((1 << ATMEL_ID_PIOA) | - (1 << ATMEL_ID_PIOB) | - (1 << ATMEL_ID_PIOC), &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOA); + at91_periph_clk_enable(ATMEL_ID_PIOB); + at91_periph_clk_enable(ATMEL_ID_PIOC); /* The mach-type is the same for both Snapper 9260 and 9G20 */ gd->bd->bi_arch_number = MACH_TYPE_SNAPPER_9260; diff --git a/board/calao/usb_a9263/usb_a9263.c b/board/calao/usb_a9263/usb_a9263.c index 266e950..d627b24 100644 --- a/board/calao/usb_a9263/usb_a9263.c +++ b/board/calao/usb_a9263/usb_a9263.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include #include #include @@ -43,7 +43,6 @@ static void usb_a9263_nand_hw_init(void) unsigned long csa; at91_smc_t *smc = (at91_smc_t *)ATMEL_BASE_SMC0; at91_matrix_t *matrix = (at91_matrix_t *)ATMEL_BASE_MATRIX; - at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; /* Enable CS3 */ csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A; @@ -66,7 +65,8 @@ static void usb_a9263_nand_hw_init(void) AT91_SMC_MODE_DBW_8 | AT91_SMC_MODE_TDF_CYCLE(2), &smc->cs[3].mode); - writel(1 << ATMEL_ID_PIOA | 1 << ATMEL_ID_PIOCDE, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOA); + at91_periph_clk_enable(ATMEL_ID_PIOCDE); /* Configure RDY/BSY */ gpio_request(CONFIG_SYS_NAND_READY_PIN, "NAND ready/busy"); @@ -81,10 +81,7 @@ static void usb_a9263_nand_hw_init(void) #ifdef CONFIG_MACB static void usb_a9263_macb_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; - - /* Enable clock */ - writel(1 << ATMEL_ID_EMAC, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_EMAC); /* * Disable pull-up on: diff --git a/board/egnite/ethernut5/ethernut5.c b/board/egnite/ethernut5/ethernut5.c index 67d3984..2c8e978 100644 --- a/board/egnite/ethernut5/ethernut5.c +++ b/board/egnite/ethernut5/ethernut5.c @@ -67,8 +67,8 @@ #include #include #include -#include #include +#include #include #include #include @@ -151,12 +151,10 @@ static void ethernut5_nand_hw_init(void) */ int board_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + at91_periph_clk_enable(ATMEL_ID_PIOA); + at91_periph_clk_enable(ATMEL_ID_PIOB); + at91_periph_clk_enable(ATMEL_ID_PIOC); - /* Enable clocks for all PIOs */ - writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) | - (1 << ATMEL_ID_PIOC), - &pmc->pcer); /* Set adress of boot parameters. */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; /* Initialize UARTs and power management. */ @@ -179,10 +177,9 @@ int board_eth_init(bd_t *bis) { const char *devname; unsigned short mode; - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - /* Enable on-chip EMAC clock. */ - writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_EMAC0); + /* Need to reset PHY via power management. */ ethernut5_phy_reset(); /* Set peripheral pins. */ @@ -211,10 +208,8 @@ int board_eth_init(bd_t *bis) #ifdef CONFIG_GENERIC_ATMEL_MCI int board_mmc_init(bd_t *bd) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + at91_periph_clk_enable(ATMEL_ID_MCI); - /* Enable MCI clock. */ - writel(1 << ATMEL_ID_MCI, &pmc->pcer); /* Initialize MCI hardware. */ at91_mci_hw_init(); /* Register the device. */ @@ -229,6 +224,7 @@ int board_mmc_getcd(struct mmc *mmc) #ifdef CONFIG_ATMEL_SPI /* + * Note, that u-boot uses different code for SPI bus access. While * memory routines use automatic chip select control, the serial * flash support requires 'manual' GPIO control. Thus, we switch diff --git a/board/esd/meesc/meesc.c b/board/esd/meesc/meesc.c index b7f9f90..fe781dc 100644 --- a/board/esd/meesc/meesc.c +++ b/board/esd/meesc/meesc.c @@ -87,9 +87,8 @@ static void meesc_nand_hw_init(void) #ifdef CONFIG_MACB static void meesc_macb_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - /* Enable clock */ - writel(1 << ATMEL_ID_EMAC, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_EMAC); + at91_macb_hw_init(); } #endif @@ -244,12 +243,10 @@ int misc_init_r(void) int board_early_init_f(void) { - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - /* enable all clocks */ - writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) | - (1 << ATMEL_ID_PIOCDE) | (1 << ATMEL_ID_UHP), - &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOA); + at91_periph_clk_enable(ATMEL_ID_PIOB); + at91_periph_clk_enable(ATMEL_ID_PIOCDE); + at91_periph_clk_enable(ATMEL_ID_UHP); at91_seriald_hw_init(); diff --git a/board/mini-box/picosam9g45/led.c b/board/mini-box/picosam9g45/led.c index dc1013a..3fb6a7b 100644 --- a/board/mini-box/picosam9g45/led.c +++ b/board/mini-box/picosam9g45/led.c @@ -9,15 +9,12 @@ #include #include #include -#include +#include #include void coloured_LED_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - /* Enable clock */ - writel(1 << ATMEL_ID_PIODE, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIODE); at91_set_gpio_output(CONFIG_GREEN_LED, 1); diff --git a/board/mini-box/picosam9g45/picosam9g45.c b/board/mini-box/picosam9g45/picosam9g45.c index 193f14d..32ba9c6 100644 --- a/board/mini-box/picosam9g45/picosam9g45.c +++ b/board/mini-box/picosam9g45/picosam9g45.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include @@ -80,15 +79,13 @@ static void ddr2_conf(struct atmel_mpddrc_config *ddr2) void mem_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; struct at91_matrix *mat = (struct at91_matrix *)ATMEL_BASE_MATRIX; struct atmel_mpddrc_config ddr2; unsigned long csa; ddr2_conf(&ddr2); - /* enable DDR2 clock */ - writel(AT91_PMC_DDR, &pmc->scer); + at91_system_clk_enable(AT91_PMC_DDR); /* Chip select 1 is for DDR2/SDRAM */ csa = readl(&mat->ebicsa); @@ -105,9 +102,7 @@ void mem_init(void) #ifdef CONFIG_CMD_USB static void picosam9g45_usb_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - writel(1 << ATMEL_ID_PIODE, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIODE); at91_set_gpio_output(AT91_PIN_PD1, 0); at91_set_gpio_output(AT91_PIN_PD3, 0); @@ -117,11 +112,9 @@ static void picosam9g45_usb_hw_init(void) #ifdef CONFIG_MACB static void picosam9g45_macb_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; - /* Enable clock */ - writel(1 << ATMEL_ID_EMAC, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_EMAC); /* * Disable pull-up on: @@ -181,8 +174,6 @@ void lcd_disable(void) static void picosam9g45_lcd_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */ at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */ at91_set_A_periph(AT91_PIN_PE3, 0); /* LCDVSYNC */ @@ -214,7 +205,7 @@ static void picosam9g45_lcd_hw_init(void) at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */ at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */ - writel(1 << ATMEL_ID_LCDC, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_LCDC); gd->fb_base = CONFIG_AT91SAM9G45_LCD_BASE; } diff --git a/board/ronetix/pm9261/led.c b/board/ronetix/pm9261/led.c index cc4c2a0..53e353a 100644 --- a/board/ronetix/pm9261/led.c +++ b/board/ronetix/pm9261/led.c @@ -9,15 +9,12 @@ #include #include -#include +#include #include void coloured_LED_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - /* Enable clock */ - writel(1 << ATMEL_ID_PIOC, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOC); gpio_direction_output(CONFIG_RED_LED, 1); gpio_direction_output(CONFIG_GREEN_LED, 1); diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c index b96f745..3cc01cb 100644 --- a/board/ronetix/pm9261/pm9261.c +++ b/board/ronetix/pm9261/pm9261.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include @@ -41,7 +40,6 @@ static void pm9261_nand_hw_init(void) unsigned long csa; struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; /* Enable CS3 */ csa = readl(&matrix->csa) | AT91_MATRIX_CSA_EBI_CS3A; @@ -69,9 +67,8 @@ static void pm9261_nand_hw_init(void) AT91_SMC_MODE_TDF_CYCLE(2), &smc->cs[3].mode); - writel(1 << ATMEL_ID_PIOA | - 1 << ATMEL_ID_PIOC, - &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOA); + at91_periph_clk_enable(ATMEL_ID_PIOC); /* Configure RDY/BSY */ gpio_direction_input(CONFIG_SYS_NAND_READY_PIN); @@ -89,7 +86,6 @@ static void pm9261_nand_hw_init(void) static void pm9261_dm9000_hw_init(void) { struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; /* Configure SMC CS2 for DM9000 */ writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) | @@ -110,7 +106,7 @@ static void pm9261_dm9000_hw_init(void) &smc->cs[2].mode); /* Configure Interrupt pin as input, no pull-up */ - writel(1 << ATMEL_ID_PIOA, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOA); at91_set_pio_input(AT91_PIO_PORTA, 24, 0); } #endif @@ -145,8 +141,6 @@ void lcd_disable(void) static void pm9261_lcd_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* LCDHSYNC */ at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* LCDDOTCK */ at91_set_a_periph(AT91_PIO_PORTB, 3, 0); /* LCDDEN */ @@ -170,7 +164,7 @@ static void pm9261_lcd_hw_init(void) at91_set_b_periph(AT91_PIO_PORTB, 27, 0); /* LCDD22 */ at91_set_b_periph(AT91_PIO_PORTB, 28, 0); /* LCDD23 */ - writel(1 << 17, &pmc->scer); /* LCD controller Clock, AT91SAM9261 only */ + at91_system_clk_enable(AT91_PMC_HCK1); gd->fb_base = ATMEL_BASE_SRAM; } @@ -224,12 +218,8 @@ void lcd_show_board_info(void) int board_early_init_f(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - /* Enable clocks for some PIOs */ - writel(1 << ATMEL_ID_PIOA | - 1 << ATMEL_ID_PIOC, - &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOA); + at91_periph_clk_enable(ATMEL_ID_PIOC); at91_seriald_hw_init(); diff --git a/board/ronetix/pm9263/led.c b/board/ronetix/pm9263/led.c index bfc2310..8025a20 100644 --- a/board/ronetix/pm9263/led.c +++ b/board/ronetix/pm9263/led.c @@ -9,15 +9,12 @@ #include #include -#include +#include #include void coloured_LED_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - /* Enable clock */ - writel(1 << ATMEL_ID_PIOB, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOB); gpio_direction_output(CONFIG_RED_LED, 1); gpio_direction_output(CONFIG_GREEN_LED, 1); diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c index 1b00f08..276ff80 100644 --- a/board/ronetix/pm9263/pm9263.c +++ b/board/ronetix/pm9263/pm9263.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include @@ -78,8 +77,6 @@ static void pm9263_nand_hw_init(void) #ifdef CONFIG_MACB static void pm9263_macb_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - /* * PB27 enables the 50MHz oscillator for Ethernet PHY * 1 - enable @@ -88,8 +85,7 @@ static void pm9263_macb_hw_init(void) at91_set_pio_output(AT91_PIO_PORTB, 27, 1); at91_set_pio_value(AT91_PIO_PORTB, 27, 1); /* 1- enable, 0 - disable */ - /* Enable clock */ - writel(1 << ATMEL_ID_EMAC, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_EMAC); /* * Disable pull-up on: @@ -231,8 +227,6 @@ static int pm9263_lcd_hw_psram_init(void) static void pm9263_lcd_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDVSYNC */ at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDHSYNC */ at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDDOTCK */ @@ -257,7 +251,7 @@ static void pm9263_lcd_hw_init(void) at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDD22 */ at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDD23 */ - writel(1 << ATMEL_ID_LCDC, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_LCDC); /* Power Control */ at91_set_pio_output(AT91_PIO_PORTA, 22, 1); @@ -323,12 +317,9 @@ void lcd_show_board_info(void) int board_early_init_f(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - /* Enable clocks for all PIOs */ - writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) | - (1 << ATMEL_ID_PIOCDE), - &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOA); + at91_periph_clk_enable(ATMEL_ID_PIOB); + at91_periph_clk_enable(ATMEL_ID_PIOCDE); at91_seriald_hw_init(); diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c index efc4133..c2707e0 100644 --- a/board/ronetix/pm9g45/pm9g45.c +++ b/board/ronetix/pm9g45/pm9g45.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include @@ -39,7 +38,6 @@ static void pm9g45_nand_hw_init(void) unsigned long csa; struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; /* Enable CS3 */ csa = readl(&matrix->ccr[6]) | AT91_MATRIX_CSA_EBI_CS3A; @@ -63,7 +61,7 @@ static void pm9g45_nand_hw_init(void) AT91_SMC_MODE_TDF_CYCLE(3), &smc->cs[3].mode); - writel(1 << ATMEL_ID_PIOC, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOC); #ifdef CONFIG_SYS_NAND_READY_PIN /* Configure RDY/BSY */ @@ -78,8 +76,6 @@ static void pm9g45_nand_hw_init(void) #ifdef CONFIG_MACB static void pm9g45_macb_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - /* * PD2 enables the 50MHz oscillator for Ethernet PHY * 1 - enable @@ -88,8 +84,7 @@ static void pm9g45_macb_hw_init(void) at91_set_pio_output(AT91_PIO_PORTD, 2, 1); at91_set_pio_value(AT91_PIO_PORTD, 2, 1); /* 1- enable, 0 - disable */ - /* Enable clock */ - writel(1 << ATMEL_ID_EMAC, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_EMAC); /* * Disable pull-up on: @@ -114,13 +109,10 @@ static void pm9g45_macb_hw_init(void) int board_early_init_f(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - /* Enable clocks for all PIOs */ - writel((1 << ATMEL_ID_PIOA) | - (1 << ATMEL_ID_PIOB) | - (1 << ATMEL_ID_PIOC) | - (1 << ATMEL_ID_PIODE), &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOA); + at91_periph_clk_enable(ATMEL_ID_PIOB); + at91_periph_clk_enable(ATMEL_ID_PIOC); + at91_periph_clk_enable(ATMEL_ID_PIODE); at91_seriald_hw_init(); diff --git a/board/siemens/corvus/board.c b/board/siemens/corvus/board.c index 38c0ca3..ba70819 100644 --- a/board/siemens/corvus/board.c +++ b/board/siemens/corvus/board.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include @@ -147,13 +146,11 @@ static void ddr2_conf(struct atmel_mpddrc_config *ddr2) void mem_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; struct atmel_mpddrc_config ddr2; ddr2_conf(&ddr2); - /* enable DDR2 clock */ - writel(AT91_PMC_DDR, &pmc->scer); + at91_system_clk_enable(AT91_PMC_DDR); /* DDRAM2 Controller initialize */ ddr2_init(ATMEL_BASE_DDRSDRC0, ATMEL_BASE_CS6, &ddr2); @@ -214,6 +211,7 @@ void at91_udp_hw_init(void) /* Enable UPLL clock */ writel(AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr); + /* Enable UDPHS clock */ at91_periph_clk_enable(ATMEL_ID_UDPHS); } diff --git a/board/siemens/smartweb/smartweb.c b/board/siemens/smartweb/smartweb.c index d82f1b7..e7ee65c 100644 --- a/board/siemens/smartweb/smartweb.c +++ b/board/siemens/smartweb/smartweb.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include @@ -126,7 +125,7 @@ void at91_udp_hw_init(void) /* Enable UDPCK clock, MCK is enabled in at91_clock_init() */ at91_periph_clk_enable(ATMEL_ID_UDP); - writel(AT91SAM926x_PMC_UDP, &pmc->scer); + at91_system_clk_enable(AT91SAM926x_PMC_UDP); } struct at91_udc_data board_udc_data = { diff --git a/board/siemens/taurus/taurus.c b/board/siemens/taurus/taurus.c index 72c5e60..9374064 100644 --- a/board/siemens/taurus/taurus.c +++ b/board/siemens/taurus/taurus.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include #include @@ -300,7 +299,7 @@ void at91_udp_hw_init(void) /* Enable UDPCK clock, MCK is enabled in at91_clock_init() */ at91_periph_clk_enable(ATMEL_ID_UDP); - writel(AT91SAM926x_PMC_UDP, &pmc->scer); + at91_system_clk_enable(AT91SAM926x_PMC_UDP); } struct at91_udc_data board_udc_data = { -- cgit v0.10.2 From cd4de1d9283b928488ca3a8c2bda297e4d797f6a Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Wed, 3 Feb 2016 10:16:51 +0800 Subject: drivers: at91: clean up peripheral clock code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Due to introducing the new peripheral clock handle functions, use these functions to reduce the duplicated code. Signed-off-by: Wenyou Yang Tested-by: Heiko Schocher [fixup for missing clk.h in at91_emac.c] Signed-off-by: Andreas Bießmann diff --git a/drivers/net/at91_emac.c b/drivers/net/at91_emac.c index 2659592..9151600 100644 --- a/drivers/net/at91_emac.c +++ b/drivers/net/at91_emac.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include #include #include @@ -321,7 +321,6 @@ static int at91emac_init(struct eth_device *netdev, bd_t *bd) emac_device *dev; at91_emac_t *emac; at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; emac = (at91_emac_t *) netdev->iobase; dev = (emac_device *) netdev->priv; @@ -347,7 +346,8 @@ static int at91emac_init(struct eth_device *netdev, bd_t *bd) writel(value, &pio->piob.pdr); writel(value, &pio->piob.bsr); - writel(1 << ATMEL_ID_EMAC, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_EMAC); + writel(readl(&emac->ctl) | AT91_EMAC_CTL_CSR, &emac->ctl); /* Init Ethernet buffers */ @@ -452,10 +452,10 @@ static int at91emac_recv(struct eth_device *netdev) static int at91emac_write_hwaddr(struct eth_device *netdev) { at91_emac_t *emac; - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; emac = (at91_emac_t *) netdev->iobase; - writel(1 << ATMEL_ID_EMAC, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_EMAC); + debug_cond(DEBUG_AT91EMAC, "init MAC-ADDR %02x:%02x:%02x:%02x:%02x:%02x\n", netdev->enetaddr[5], netdev->enetaddr[4], netdev->enetaddr[3], diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index 9a8f004..a33fb49 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -40,11 +40,7 @@ int ehci_hcd_init(int index, enum usb_init_type init, } /* Enable USB Host clock */ -#ifdef CPU_HAS_PCR at91_periph_clk_enable(ATMEL_ID_UHPHS); -#else - writel(1 << ATMEL_ID_UHPHS, &pmc->pcer); -#endif *hccr = (struct ehci_hccr *)ATMEL_BASE_EHCI; *hcor = (struct ehci_hcor *)((uint32_t)*hccr + @@ -59,11 +55,7 @@ int ehci_hcd_stop(int index) ulong start_time, tmp_time; /* Disable USB Host Clock */ -#ifdef CPU_HAS_PCR at91_periph_clk_disable(ATMEL_ID_UHPHS); -#else - writel(1 << ATMEL_ID_UHPHS, &pmc->pcdr); -#endif start_time = get_timer(0); /* Disable UTMI PLL */ diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 820e2e5..da85111 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -37,17 +37,11 @@ int usb_cpu_init(void) writel(AT91_PMC_USBS_USB_UPLL | AT91_PMC_USBDIV_10, &pmc->usb); #endif - /* Enable USB host clock. */ -#ifdef CPU_HAS_PCR at91_periph_clk_enable(ATMEL_ID_UHP); -#else - writel(1 << ATMEL_ID_UHP, &pmc->pcer); -#endif + at91_system_clk_enable(ATMEL_PMC_UHP); #if defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10) - writel(ATMEL_PMC_UHP | AT91_PMC_HCK0, &pmc->scer); -#else - writel(ATMEL_PMC_UHP, &pmc->scer); + at91_system_clk_enable(AT91_PMC_HCK0); #endif return 0; @@ -57,17 +51,11 @@ int usb_cpu_stop(void) { at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; - /* Disable USB host clock. */ -#ifdef CPU_HAS_PCR at91_periph_clk_disable(ATMEL_ID_UHP); -#else - writel(1 << ATMEL_ID_UHP, &pmc->pcdr); -#endif + at91_system_clk_disable(ATMEL_PMC_UHP); #if defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10) - writel(ATMEL_PMC_UHP | AT91_PMC_HCK0, &pmc->scdr); -#else - writel(ATMEL_PMC_UHP, &pmc->scdr); + at91_system_clk_disable(AT91_PMC_HCK0); #endif #ifdef CONFIG_USB_ATMEL_CLK_SEL_PLLB -- cgit v0.10.2 From 1e70b373466974a7b75e39ddfa944aec7d1cccef Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Tue, 2 Feb 2016 11:11:51 +0800 Subject: ARM: at91: clock: add UTMI PLL enable/disable function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To avoid the duplicated code, add the UTMI PLL handle functions, and add PMC_USB init function too. Signed-off-by: Wenyou Yang Tested-by: Heiko Schocher Reviewed-by: Andreas Bießmann diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 2a0308f..5300d68 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -10,6 +10,8 @@ #include #include +#define EN_UPLL_TIMEOUT 500 + void at91_periph_clk_enable(int id) { struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; @@ -64,3 +66,49 @@ void at91_system_clk_disable(int sys_clk) writel(sys_clk, &pmc->scdr); } + +int at91_upll_clk_enable(void) +{ + struct at91_pmc *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; + ulong start_time, tmp_time; + + if ((readl(&pmc->uckr) & AT91_PMC_UPLLEN) == AT91_PMC_UPLLEN) + return 0; + + start_time = get_timer(0); + writel(AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr); + while ((readl(&pmc->sr) & AT91_PMC_LOCKU) != AT91_PMC_LOCKU) { + tmp_time = get_timer(0); + if ((tmp_time - start_time) > EN_UPLL_TIMEOUT) { + printf("ERROR: failed to enable UPLL\n"); + return -1; + } + } + + return 0; +} + +int at91_upll_clk_disable(void) +{ + struct at91_pmc *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; + ulong start_time, tmp_time; + + start_time = get_timer(0); + writel(readl(&pmc->uckr) & ~AT91_PMC_UPLLEN, &pmc->uckr); + while ((readl(&pmc->sr) & AT91_PMC_LOCKU) == AT91_PMC_LOCKU) { + tmp_time = get_timer(0); + if ((tmp_time - start_time) > EN_UPLL_TIMEOUT) { + printf("ERROR: failed to stop UPLL\n"); + return -1; + } + } + + return 0; +} + +void at91_usb_clk_init(u32 value) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + writel(value, &pmc->usb); +} diff --git a/arch/arm/mach-at91/include/mach/clk.h b/arch/arm/mach-at91/include/mach/clk.h index bef4e1c..b2604ef 100644 --- a/arch/arm/mach-at91/include/mach/clk.h +++ b/arch/arm/mach-at91/include/mach/clk.h @@ -130,5 +130,8 @@ int at91_enable_periph_generated_clk(u32 id, u32 clk_source, u32 div); u32 at91_get_periph_generated_clk(u32 id); void at91_system_clk_enable(int sys_clk); void at91_system_clk_disable(int sys_clk); +int at91_upll_clk_enable(void); +int at91_upll_clk_disable(void); +void at91_usb_clk_init(u32 value); #endif /* __ASM_ARM_ARCH_CLK_H__ */ -- cgit v0.10.2 From db5c102be282ce60c8990bb8de022b81fc9530ff Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Tue, 2 Feb 2016 11:11:52 +0800 Subject: ARM: at91: armv7: clean up UTMI PLL handle code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Due to introducing the UTMI PLL enable function, use this function to reduce the duplicated code. Signed-off-by: Wenyou Yang Tested-by: Heiko Schocher Reviewed-by: Andreas Bießmann diff --git a/arch/arm/mach-at91/armv7/sama5d2_devices.c b/arch/arm/mach-at91/armv7/sama5d2_devices.c index 88f8f2c..978eac2 100644 --- a/arch/arm/mach-at91/armv7/sama5d2_devices.c +++ b/arch/arm/mach-at91/armv7/sama5d2_devices.c @@ -7,7 +7,6 @@ #include #include -#include #include #include @@ -48,9 +47,7 @@ char *get_cpu_name() #ifdef CONFIG_USB_GADGET_ATMEL_USBA void at91_udp_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - writel(AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr); + at91_upll_clk_enable(); at91_periph_clk_enable(ATMEL_ID_UDPHS); } diff --git a/arch/arm/mach-at91/armv7/sama5d3_devices.c b/arch/arm/mach-at91/armv7/sama5d3_devices.c index 78ecfc8..64ac262 100644 --- a/arch/arm/mach-at91/armv7/sama5d3_devices.c +++ b/arch/arm/mach-at91/armv7/sama5d3_devices.c @@ -8,7 +8,6 @@ #include #include #include -#include #include #include #include @@ -208,10 +207,8 @@ void at91_lcd_hw_init(void) #ifdef CONFIG_USB_GADGET_ATMEL_USBA void at91_udp_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - /* Enable UPLL clock */ - writel(AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr); + at91_upll_clk_enable(); /* Enable UDPHS clock */ at91_periph_clk_enable(ATMEL_ID_UDPHS); } diff --git a/arch/arm/mach-at91/armv7/sama5d4_devices.c b/arch/arm/mach-at91/armv7/sama5d4_devices.c index ce33cd4..ebb779e 100644 --- a/arch/arm/mach-at91/armv7/sama5d4_devices.c +++ b/arch/arm/mach-at91/armv7/sama5d4_devices.c @@ -8,7 +8,6 @@ #include #include #include -#include #include #include #include @@ -37,10 +36,8 @@ char *get_cpu_name() #ifdef CONFIG_USB_GADGET_ATMEL_USBA void at91_udp_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - /* Enable UPLL clock */ - writel(AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr); + at91_upll_clk_enable(); /* Enable UDPHS clock */ at91_periph_clk_enable(ATMEL_ID_UDPHS); } -- cgit v0.10.2 From b55b596086292d1675a09ac77b59d51871ce4f46 Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Tue, 2 Feb 2016 11:11:53 +0800 Subject: drivers: usb: atmel: clean up the UTMI PLL code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Due to introducing the new UTMI PLL clock handle functions, use these function to reduce the duplicated code. Signed-off-by: Wenyou Yang Tested-by: Heiko Schocher Reviewed-by: Andreas Bießmann diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index a33fb49..1d7d280 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -7,37 +7,18 @@ */ #include -#include #include #include -#include -#include #include #include "ehci.h" -/* Enable UTMI PLL time out 500us - * 10 times as datasheet specified - */ -#define EN_UPLL_TIMEOUT 500UL - int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr, struct ehci_hcor **hcor) { - at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; - ulong start_time, tmp_time; - - start_time = get_timer(0); /* Enable UTMI PLL */ - writel(AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr); - while ((readl(&pmc->sr) & AT91_PMC_LOCKU) != AT91_PMC_LOCKU) { - WATCHDOG_RESET(); - tmp_time = get_timer(0); - if ((tmp_time - start_time) > EN_UPLL_TIMEOUT) { - printf("ERROR: failed to enable UPLL\n"); - return -1; - } - } + if (at91_upll_clk_enable()) + return -1; /* Enable USB Host clock */ at91_periph_clk_enable(ATMEL_ID_UHPHS); @@ -51,23 +32,12 @@ int ehci_hcd_init(int index, enum usb_init_type init, int ehci_hcd_stop(int index) { - at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; - ulong start_time, tmp_time; - /* Disable USB Host Clock */ at91_periph_clk_disable(ATMEL_ID_UHPHS); - start_time = get_timer(0); /* Disable UTMI PLL */ - writel(readl(&pmc->uckr) & ~AT91_PMC_UPLLEN, &pmc->uckr); - while ((readl(&pmc->sr) & AT91_PMC_LOCKU) == AT91_PMC_LOCKU) { - WATCHDOG_RESET(); - tmp_time = get_timer(0); - if ((tmp_time - start_time) > EN_UPLL_TIMEOUT) { - printf("ERROR: failed to stop UPLL\n"); - return -1; - } - } + if (at91_upll_clk_disable()) + return -1; return 0; } diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index da85111..6ae6959 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -24,17 +24,13 @@ int usb_cpu_init(void) while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) ; #ifdef CONFIG_AT91SAM9N12 - writel(AT91_PMC_USBS_USB_PLLB | AT91_PMC_USB_DIV_2, &pmc->usb); + at91_usb_clk_init(AT91_PMC_USBS_USB_PLLB | AT91_PMC_USB_DIV_2); #endif #elif defined(CONFIG_USB_ATMEL_CLK_SEL_UPLL) - /* Enable UPLL */ - writel(readl(&pmc->uckr) | AT91_PMC_UPLLEN | AT91_PMC_BIASEN, - &pmc->uckr); - while ((readl(&pmc->sr) & AT91_PMC_LOCKU) != AT91_PMC_LOCKU) - ; + if (at91_upll_clk_enable()) + return -1; - /* Select PLLA as input clock of OHCI */ - writel(AT91_PMC_USBS_USB_UPLL | AT91_PMC_USBDIV_10, &pmc->usb); + at91_usb_clk_init(AT91_PMC_USBS_USB_UPLL | AT91_PMC_USBDIV_10); #endif at91_periph_clk_enable(ATMEL_ID_UHP); @@ -60,17 +56,15 @@ int usb_cpu_stop(void) #ifdef CONFIG_USB_ATMEL_CLK_SEL_PLLB #ifdef CONFIG_AT91SAM9N12 - writel(0, &pmc->usb); + at91_usb_clk_init(0); #endif /* Disable PLLB */ writel(0, &pmc->pllbr); while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0) ; #elif defined(CONFIG_USB_ATMEL_CLK_SEL_UPLL) - /* Disable UPLL */ - writel(readl(&pmc->uckr) & (~AT91_PMC_UPLLEN), &pmc->uckr); - while ((readl(&pmc->sr) & AT91_PMC_LOCKU) == AT91_PMC_LOCKU) - ; + if (at91_upll_clk_disable()) + return -1; #endif return 0; -- cgit v0.10.2 From 8d233521cd5f26f093e2bf835118149fea4111c3 Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Tue, 2 Feb 2016 11:11:54 +0800 Subject: board: atmel: siemens: clean up UTMI PLL code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Due to introducing the new UTMI PLL clock handle functions, use the functions to reduce the duplicated code. Signed-off-by: Wenyou Yang Tested-by: Heiko Schocher Reviewed-by: Andreas Bießmann diff --git a/board/siemens/corvus/board.c b/board/siemens/corvus/board.c index ba70819..9d52661 100644 --- a/board/siemens/corvus/board.c +++ b/board/siemens/corvus/board.c @@ -207,10 +207,8 @@ int board_early_init_f(void) /* from ./arch/arm/mach-at91/armv7/sama5d3_devices.c */ void at91_udp_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - /* Enable UPLL clock */ - writel(AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr); + at91_upll_clk_enable(); /* Enable UDPHS clock */ at91_periph_clk_enable(ATMEL_ID_UDPHS); -- cgit v0.10.2 From be5e485cf995d916ec2e0d2381879ae205354e5c Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Wed, 3 Feb 2016 10:20:43 +0800 Subject: ARM: at91: clock: add PLLB enable/disable functions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To avoid the duplicated code, add the PLLB handle functions. Signed-off-by: Wenyou Yang Reviewed-by: Andreas Bießmann Tested-by: Heiko Schocher [add enable/disable functions to arm920t] Signed-off-by: Andreas Bießmann diff --git a/arch/arm/mach-at91/arm920t/clock.c b/arch/arm/mach-at91/arm920t/clock.c index 2813bf7..8aa2100 100644 --- a/arch/arm/mach-at91/arm920t/clock.c +++ b/arch/arm/mach-at91/arm920t/clock.c @@ -18,6 +18,8 @@ # error You need to define CONFIG_AT91FAMILY in your board config! #endif +#define EN_PLLB_TIMEOUT 500 + DECLARE_GLOBAL_DATA_PTR; static unsigned long at91_css_to_rate(unsigned long css) @@ -155,3 +157,39 @@ int at91_clock_init(unsigned long main_clock) return 0; } + +int at91_pllb_clk_enable(u32 pllbr) +{ + struct at91_pmc *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; + ulong start_time, tmp_time; + + start_time = get_timer(0); + writel(pllbr, &pmc->pllbr); + while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) { + tmp_time = get_timer(0); + if ((tmp_time - start_time) > EN_PLLB_TIMEOUT) { + printf("ERROR: failed to enable PLLB\n"); + return -1; + } + } + + return 0; +} + +int at91_pllb_clk_disable(void) +{ + struct at91_pmc *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; + ulong start_time, tmp_time; + + start_time = get_timer(0); + writel(0, &pmc->pllbr); + while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0) { + tmp_time = get_timer(0); + if ((tmp_time - start_time) > EN_PLLB_TIMEOUT) { + printf("ERROR: failed to disable PLLB\n"); + return -1; + } + } + + return 0; +} diff --git a/arch/arm/mach-at91/arm926ejs/clock.c b/arch/arm/mach-at91/arm926ejs/clock.c index c8b5e10..c8d24ae 100644 --- a/arch/arm/mach-at91/arm926ejs/clock.c +++ b/arch/arm/mach-at91/arm926ejs/clock.c @@ -18,6 +18,8 @@ # error You need to define CONFIG_AT91FAMILY in your board config! #endif +#define EN_PLLB_TIMEOUT 500 + DECLARE_GLOBAL_DATA_PTR; static unsigned long at91_css_to_rate(unsigned long css) @@ -242,3 +244,39 @@ void at91_mck_init(u32 mckr) while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY)) ; } + +int at91_pllb_clk_enable(u32 pllbr) +{ + struct at91_pmc *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; + ulong start_time, tmp_time; + + start_time = get_timer(0); + writel(pllbr, &pmc->pllbr); + while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) { + tmp_time = get_timer(0); + if ((tmp_time - start_time) > EN_PLLB_TIMEOUT) { + printf("ERROR: failed to enable PLLB\n"); + return -1; + } + } + + return 0; +} + +int at91_pllb_clk_disable(void) +{ + struct at91_pmc *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; + ulong start_time, tmp_time; + + start_time = get_timer(0); + writel(0, &pmc->pllbr); + while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0) { + tmp_time = get_timer(0); + if ((tmp_time - start_time) > EN_PLLB_TIMEOUT) { + printf("ERROR: failed to disable PLLB\n"); + return -1; + } + } + + return 0; +} diff --git a/arch/arm/mach-at91/include/mach/clk.h b/arch/arm/mach-at91/include/mach/clk.h index b2604ef..64dec52 100644 --- a/arch/arm/mach-at91/include/mach/clk.h +++ b/arch/arm/mach-at91/include/mach/clk.h @@ -133,5 +133,7 @@ void at91_system_clk_disable(int sys_clk); int at91_upll_clk_enable(void); int at91_upll_clk_disable(void); void at91_usb_clk_init(u32 value); +int at91_pllb_clk_enable(u32 pllbr); +int at91_pllb_clk_disable(void); #endif /* __ASM_ARM_ARCH_CLK_H__ */ -- cgit v0.10.2 From 9cf7385c9b4d33b43dcfb6782f0f246ea33769d9 Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Wed, 3 Feb 2016 10:20:44 +0800 Subject: drivers: usb: ohci-at91: clean up the PLLB code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Due to introducing the new PLLB clock handle functions, use these functions to clean up the PLLB enable/disable code. Signed-off-by: Wenyou Yang Reviewed-by: Andreas Bießmann Tested-by: Heiko Schocher diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 6ae6959..e030a0a 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -9,20 +9,14 @@ #if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) -#include -#include -#include #include int usb_cpu_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; - #ifdef CONFIG_USB_ATMEL_CLK_SEL_PLLB - /* Enable PLLB */ - writel(get_pllb_init(), &pmc->pllbr); - while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) - ; + if (at91_pllb_clk_enable(get_pllb_init())) + return -1; + #ifdef CONFIG_AT91SAM9N12 at91_usb_clk_init(AT91_PMC_USBS_USB_PLLB | AT91_PMC_USB_DIV_2); #endif @@ -45,8 +39,6 @@ int usb_cpu_init(void) int usb_cpu_stop(void) { - at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; - at91_periph_clk_disable(ATMEL_ID_UHP); at91_system_clk_disable(ATMEL_PMC_UHP); @@ -58,10 +50,10 @@ int usb_cpu_stop(void) #ifdef CONFIG_AT91SAM9N12 at91_usb_clk_init(0); #endif - /* Disable PLLB */ - writel(0, &pmc->pllbr); - while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0) - ; + + if (at91_pllb_clk_disable()) + return -1; + #elif defined(CONFIG_USB_ATMEL_CLK_SEL_UPLL) if (at91_upll_clk_disable()) return -1; -- cgit v0.10.2 From 30f65c85decb7d6816ba358927ab86e05ccaea2e Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Wed, 3 Feb 2016 10:20:45 +0800 Subject: board: atmel: siemens: clean up PLLB code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Due to introducing the new PLLB clock handle functions, use these functions to clean up the PLLB enable code. Signed-off-by: Wenyou Yang Reviewed-by: Andreas Bießmann Tested-by: Heiko Schocher diff --git a/board/siemens/smartweb/smartweb.c b/board/siemens/smartweb/smartweb.c index e7ee65c..47a60a7 100644 --- a/board/siemens/smartweb/smartweb.c +++ b/board/siemens/smartweb/smartweb.c @@ -115,12 +115,8 @@ static void smartweb_macb_hw_init(void) void at91_udp_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; - /* Enable PLLB */ - writel(get_pllb_init(), &pmc->pllbr); - while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) - ; + at91_pllb_clk_enable(get_pllb_init()); /* Enable UDPCK clock, MCK is enabled in at91_clock_init() */ at91_periph_clk_enable(ATMEL_ID_UDP); diff --git a/board/siemens/taurus/taurus.c b/board/siemens/taurus/taurus.c index 9374064..b0385d8 100644 --- a/board/siemens/taurus/taurus.c +++ b/board/siemens/taurus/taurus.c @@ -289,12 +289,8 @@ void spi_cs_deactivate(struct spi_slave *slave) void at91_udp_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; - /* Enable PLLB */ - writel(get_pllb_init(), &pmc->pllbr); - while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) - ; + at91_pllb_clk_enable(get_pllb_init()); /* Enable UDPCK clock, MCK is enabled in at91_clock_init() */ at91_periph_clk_enable(ATMEL_ID_UDP); -- cgit v0.10.2 From c0b868c08771ec73c8f837d44d3dc5bd9f05216f Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Tue, 2 Feb 2016 12:46:12 +0800 Subject: ARM: at91: clock: add PMC_PLLICPR init function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To avoid the duplicated code, add the PMC_PLLICPR init function. Signed-off-by: Wenyou Yang Tested-by: Heiko Schocher Reviewed-by: Andreas Bießmann diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 5300d68..06dcbbc 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -112,3 +112,10 @@ void at91_usb_clk_init(u32 value) writel(value, &pmc->usb); } + +void at91_pllicpr_init(u32 icpr) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + writel(icpr, &pmc->pllicpr); +} diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index eb40194..7684f09 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -246,4 +246,11 @@ typedef struct at91_pmc { #define AT91_PMC_GCKRDY (1 << 24) #define AT91_PMC_PROTKEY 0x504d4301 /* Activation Code */ + +/* PLL Charge Pump Current Register (PMC_PLLICPR) */ +#define AT91_PMC_ICP_PLLA(x) (((x) & 0x3) << 0) +#define AT91_PMC_IPLL_PLLA(x) (((x) & 0x7) << 8) +#define AT91_PMC_ICP_PLLU(x) (((x) & 0x3) << 16) +#define AT91_PMC_IVCO_PLLU(x) (((x) & 0x3) << 24) + #endif diff --git a/arch/arm/mach-at91/include/mach/clk.h b/arch/arm/mach-at91/include/mach/clk.h index 64dec52..8577c74 100644 --- a/arch/arm/mach-at91/include/mach/clk.h +++ b/arch/arm/mach-at91/include/mach/clk.h @@ -135,5 +135,6 @@ int at91_upll_clk_disable(void); void at91_usb_clk_init(u32 value); int at91_pllb_clk_enable(u32 pllbr); int at91_pllb_clk_disable(void); +void at91_pllicpr_init(u32 icpr); #endif /* __ASM_ARM_ARCH_CLK_H__ */ -- cgit v0.10.2 From c43a72e88eb89d7f47d92e5a406efd5c67ab8434 Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Tue, 2 Feb 2016 12:46:13 +0800 Subject: ARM: at91: clean up the PMC_PLLICPR init code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Due to introducing the PMC_PLLICPR init function, use this function to clean up the code. Signed-off-by: Wenyou Yang Tested-by: Heiko Schocher Reviewed-by: Andreas Bießmann diff --git a/arch/arm/mach-at91/spl_at91.c b/arch/arm/mach-at91/spl_at91.c index b19f95b..cc3341a 100644 --- a/arch/arm/mach-at91/spl_at91.c +++ b/arch/arm/mach-at91/spl_at91.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include @@ -77,8 +76,6 @@ void __weak spl_board_init(void) void board_init_f(ulong dummy) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - lowlevel_clock_init(); at91_disable_wdt(); @@ -86,7 +83,7 @@ void board_init_f(ulong dummy) * At this stage the main oscillator is supposed to be enabled * PCK = MCK = MOSC */ - writel(0x00, &pmc->pllicpr); + at91_pllicpr_init(0x00); /* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */ at91_plla_init(CONFIG_SYS_AT91_PLLA); -- cgit v0.10.2 From ede86ed26f56c5025684a1d171e3247f51a99ea2 Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Tue, 2 Feb 2016 12:46:14 +0800 Subject: board: atmel: clean up the PMC_PLLICPR init code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Due to introducing the PMC_PLLICPR init function, use this function to clean up the code. Signed-off-by: Wenyou Yang Tested-by: Heiko Schocher Reviewed-by: Andreas Bießmann diff --git a/board/atmel/sama5d3_xplained/sama5d3_xplained.c b/board/atmel/sama5d3_xplained/sama5d3_xplained.c index c8a5795..2b9da91 100644 --- a/board/atmel/sama5d3_xplained/sama5d3_xplained.c +++ b/board/atmel/sama5d3_xplained/sama5d3_xplained.c @@ -10,7 +10,6 @@ #include #include #include -#include #include #include #include @@ -198,7 +197,6 @@ void mem_init(void) void at91_pmc_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; u32 tmp; tmp = AT91_PMC_PLLAR_29 | @@ -207,7 +205,7 @@ void at91_pmc_init(void) AT91_PMC_PLLXR_DIV(1); at91_plla_init(tmp); - writel(0x3 << 8, &pmc->pllicpr); + at91_pllicpr_init(AT91_PMC_IPLL_PLLA(0x3)); tmp = AT91_PMC_MCKR_MDIV_4 | AT91_PMC_MCKR_CSS_PLLA; diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c index 8576560..e8ee612 100644 --- a/board/atmel/sama5d3xek/sama5d3xek.c +++ b/board/atmel/sama5d3xek/sama5d3xek.c @@ -10,7 +10,6 @@ #include #include #include -#include #include #include #include @@ -457,7 +456,6 @@ void mem_init(void) void at91_pmc_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; u32 tmp; tmp = AT91_PMC_PLLAR_29 | @@ -466,7 +464,7 @@ void at91_pmc_init(void) AT91_PMC_PLLXR_DIV(1); at91_plla_init(tmp); - writel(0x3 << 8, &pmc->pllicpr); + at91_pllicpr_init(AT91_PMC_IPLL_PLLA(0x3)); tmp = AT91_PMC_MCKR_MDIV_4 | AT91_PMC_MCKR_CSS_PLLA; diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c index e154aa9..f4eef96 100644 --- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c +++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c @@ -8,7 +8,6 @@ #include #include #include -#include #include #include #include @@ -397,7 +396,6 @@ void mem_init(void) void at91_pmc_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; u32 tmp; tmp = AT91_PMC_PLLAR_29 | @@ -406,7 +404,7 @@ void at91_pmc_init(void) AT91_PMC_PLLXR_DIV(1); at91_plla_init(tmp); - writel(0x0 << 8, &pmc->pllicpr); + at91_pllicpr_init(AT91_PMC_IPLL_PLLA(0x0)); tmp = AT91_PMC_MCKR_H32MXDIV | AT91_PMC_MCKR_PLLADIV_2 | diff --git a/board/atmel/sama5d4ek/sama5d4ek.c b/board/atmel/sama5d4ek/sama5d4ek.c index f174cf5..aee6217 100644 --- a/board/atmel/sama5d4ek/sama5d4ek.c +++ b/board/atmel/sama5d4ek/sama5d4ek.c @@ -8,7 +8,6 @@ #include #include #include -#include #include #include #include @@ -393,7 +392,6 @@ void mem_init(void) void at91_pmc_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; u32 tmp; tmp = AT91_PMC_PLLAR_29 | @@ -402,7 +400,7 @@ void at91_pmc_init(void) AT91_PMC_PLLXR_DIV(1); at91_plla_init(tmp); - writel(0x0 << 8, &pmc->pllicpr); + at91_pllicpr_init(AT91_PMC_IPLL_PLLA(0x0)); tmp = AT91_PMC_MCKR_H32MXDIV | AT91_PMC_MCKR_PLLADIV_2 | -- cgit v0.10.2 From b96fd8250160946e4371ba8d7075c8c5511b37a0 Mon Sep 17 00:00:00 2001 From: Matthias Michel Date: Wed, 27 Jan 2016 15:56:07 +0100 Subject: siemens,at91: enable features for smartweb MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit New features for smartweb: * switch to hush command parser * change autoboot stop to * allow to write ethaddr Signed-off-by: Matthias Michel Reviewed-by: Samuel Egli Cc: Roger Meier Cc: Heiko Schocher Reviewed-by: Heiko Schocher Reviewed-by: Andreas Bießmann diff --git a/configs/smartweb_defconfig b/configs/smartweb_defconfig index ee4340f..654bb4b 100644 --- a/configs/smartweb_defconfig +++ b/configs/smartweb_defconfig @@ -3,4 +3,7 @@ CONFIG_ARCH_AT91=y CONFIG_TARGET_SMARTWEB=y CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260" -CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_SYS_PROMPT="U-Boot# " +CONFIG_AUTOBOOT_KEYED=y +CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"\" to stop\n" +CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index 44d1d5a..de7b6bc 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -49,10 +49,18 @@ #define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */ #define CONFIG_DISPLAY_CPUINFO /* display CPU Info at startup */ +/* We set the max number of command args high to avoid HUSH bugs. */ +#define CONFIG_SYS_MAXARGS 32 + /* setting board specific options */ -# define CONFIG_MACH_TYPE MACH_TYPE_SMARTWEB -#define CONFIG_CMDLINE_EDITING +#define CONFIG_MACH_TYPE MACH_TYPE_SMARTWEB +#define CONFIG_AUTO_COMPLETE +#define CONFIG_ENV_OVERWRITE 1 /* Overwrite ethaddr / serial# */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_AUTOLOAD "yes" +#define CONFIG_RESET_TO_RETRY /* The LED PINs */ #define CONFIG_RED_LED AT91_PIN_PA9 @@ -184,9 +192,7 @@ /* General Boot Parameter */ #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTCOMMAND "run flashboot" -#define CONFIG_BOOT_RETRY_TIME 30 #define CONFIG_SYS_CBSIZE 512 -#define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_LONGHELP -- cgit v0.10.2 From c21c28b6f39468dcc13f82458fa3c6f6c5dce9d9 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 11 Feb 2016 14:13:38 +0100 Subject: arm: at91: Add support for DENX MA5D4 SoM and EVK MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add support for DENX MA5D4 SoM and MA5D4EVK board, based on the Atmel SAMA5D4 SoC. The SoM contains the SoC, eMMC, SPI NOR, SPI CAN controllers and DRAM, the baseboard contains UART connectors, ethernet port, microSD slot, LCD header, 2x CAN connector and a lot of expansion headers. Signed-off-by: Marek Vasut Cc: Andreas Bießmann Reviewed-by: Heiko Schocher Reviewed-by: Andreas Bießmann diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 9426302b..88ccf23 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -96,6 +96,11 @@ config TARGET_SAMA5D4EK select CPU_V7 select SUPPORT_SPL +config TARGET_MA5D4EVK + bool "DENX MA5D4EVK Evaluation Kit" + select CPU_V7 + select SUPPORT_SPL + config TARGET_MEESC bool "Support meesc" select CPU_ARM926EJS @@ -135,6 +140,7 @@ source "board/atmel/sama5d4_xplained/Kconfig" source "board/atmel/sama5d4ek/Kconfig" source "board/bluewater/snapper9260/Kconfig" source "board/calao/usb_a9263/Kconfig" +source "board/denx/ma5d4evk/Kconfig" source "board/egnite/ethernut5/Kconfig" source "board/esd/meesc/Kconfig" source "board/mini-box/picosam9g45/Kconfig" diff --git a/board/denx/ma5d4evk/Kconfig b/board/denx/ma5d4evk/Kconfig new file mode 100644 index 0000000..b4ef106 --- /dev/null +++ b/board/denx/ma5d4evk/Kconfig @@ -0,0 +1,12 @@ +if TARGET_MA5D4EVK + +config SYS_BOARD + default "ma5d4evk" + +config SYS_VENDOR + default "denx" + +config SYS_CONFIG_NAME + default "ma5d4evk" + +endif diff --git a/board/denx/ma5d4evk/MAINTAINERS b/board/denx/ma5d4evk/MAINTAINERS new file mode 100644 index 0000000..bb25a9c --- /dev/null +++ b/board/denx/ma5d4evk/MAINTAINERS @@ -0,0 +1,6 @@ +DENX MA5D4EVK BOARD +M: Marek Vasut +S: Maintained +F: board/denx/ma5d4evk/ +F: include/configs/ma5d4evk.h +F: configs/ma5d4evk_defconfig diff --git a/board/denx/ma5d4evk/Makefile b/board/denx/ma5d4evk/Makefile new file mode 100644 index 0000000..b12b5dc --- /dev/null +++ b/board/denx/ma5d4evk/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (C) 2015 Marek Vasut +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += ma5d4evk.o diff --git a/board/denx/ma5d4evk/ma5d4evk.c b/board/denx/ma5d4evk/ma5d4evk.c new file mode 100644 index 0000000..ec0fa28 --- /dev/null +++ b/board/denx/ma5d4evk/ma5d4evk.c @@ -0,0 +1,412 @@ +/* + * Copyright (C) 2015 Marek Vasut + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_ATMEL_SPI +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return bus == 0 && cs == 0; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + at91_set_pio_output(AT91_PIO_PORTC, 3, 0); +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + at91_set_pio_output(AT91_PIO_PORTC, 3, 1); +} + +static void ma5d4evk_spi0_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */ + + at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_SPI0); +} +#endif /* CONFIG_ATMEL_SPI */ + +#ifdef CONFIG_CMD_USB +static void ma5d4evk_usb_hw_init(void) +{ + at91_set_pio_output(AT91_PIO_PORTE, 11, 0); + at91_set_pio_output(AT91_PIO_PORTE, 14, 0); +} +#endif + +#ifdef CONFIG_LCD +vidinfo_t panel_info = { + .vl_col = 800, + .vl_row = 480, + .vl_clk = 33500000, + .vl_bpix = LCD_BPP, + .vl_tft = 1, + .vl_hsync_len = 10, + .vl_left_margin = 89, + .vl_right_margin = 164, + .vl_vsync_len = 10, + .vl_upper_margin = 23, + .vl_lower_margin = 10, + .mmio = ATMEL_BASE_LCDC, +}; + +/* No power up/down pin for the LCD pannel */ +void lcd_enable(void) { /* Empty! */ } +void lcd_disable(void) { /* Empty! */ } + +unsigned int has_lcdc(void) +{ + return 1; +} + +static void ma5d4evk_lcd_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTA, 24, 1); /* LCDPWM */ + at91_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */ + at91_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */ + at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */ + at91_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */ + at91_set_a_periph(AT91_PIO_PORTA, 29, 1); /* LCDDEN */ + + at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */ + at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */ + at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */ + at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */ + at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */ + at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */ + at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */ + at91_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */ + + at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD9 */ + at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD8 */ + at91_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */ + at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */ + at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */ + at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */ + at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */ + at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */ + + at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* LCDD16 */ + at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* LCDD17 */ + at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */ + at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */ + at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */ + at91_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */ + at91_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */ + at91_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_LCDC); +} + +#endif /* CONFIG_LCD */ + +#ifdef CONFIG_GENERIC_ATMEL_MCI +/* On-SoM eMMC */ +void ma5d4evk_mci0_hw_init(void) +{ + at91_set_b_periph(AT91_PIO_PORTC, 5, 1); /* MCI1 CDA */ + at91_set_b_periph(AT91_PIO_PORTC, 6, 1); /* MCI1 DA0 */ + at91_set_b_periph(AT91_PIO_PORTC, 7, 1); /* MCI1 DA1 */ + at91_set_b_periph(AT91_PIO_PORTC, 8, 1); /* MCI1 DA2 */ + at91_set_b_periph(AT91_PIO_PORTC, 9, 1); /* MCI1 DA3 */ + at91_set_b_periph(AT91_PIO_PORTC, 10, 1); /* MCI1 DA4 */ + at91_set_b_periph(AT91_PIO_PORTC, 11, 1); /* MCI1 DA5 */ + at91_set_b_periph(AT91_PIO_PORTC, 12, 1); /* MCI1 DA6 */ + at91_set_b_periph(AT91_PIO_PORTC, 13, 1); /* MCI1 DA7 */ + at91_set_b_periph(AT91_PIO_PORTC, 4, 0); /* MCI1 CLK */ + + /* + * As the mci io internal pull down is too strong, so if the io needs + * external pull up, the pull up resistor will be very small, if so + * the power consumption will increase, so disable the internal pull + * down to save the power. + */ + at91_set_pio_pulldown(AT91_PIO_PORTC, 5, 0); + at91_set_pio_pulldown(AT91_PIO_PORTC, 6, 0); + at91_set_pio_pulldown(AT91_PIO_PORTC, 7, 0); + at91_set_pio_pulldown(AT91_PIO_PORTC, 8, 0); + at91_set_pio_pulldown(AT91_PIO_PORTC, 9, 0); + at91_set_pio_pulldown(AT91_PIO_PORTC, 10, 0); + at91_set_pio_pulldown(AT91_PIO_PORTC, 11, 0); + at91_set_pio_pulldown(AT91_PIO_PORTC, 12, 0); + at91_set_pio_pulldown(AT91_PIO_PORTC, 13, 0); + at91_set_pio_pulldown(AT91_PIO_PORTC, 4, 0); + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_MCI0); +} + +/* On-board MicroSD slot */ +void ma5d4evk_mci1_hw_init(void) +{ + at91_set_c_periph(AT91_PIO_PORTE, 19, 1); /* MCI1 CDA */ + at91_set_c_periph(AT91_PIO_PORTE, 20, 1); /* MCI1 DA0 */ + at91_set_c_periph(AT91_PIO_PORTE, 21, 1); /* MCI1 DA1 */ + at91_set_c_periph(AT91_PIO_PORTE, 22, 1); /* MCI1 DA2 */ + at91_set_c_periph(AT91_PIO_PORTE, 23, 1); /* MCI1 DA3 */ + at91_set_c_periph(AT91_PIO_PORTE, 18, 0); /* MCI1 CLK */ + + /* + * As the mci io internal pull down is too strong, so if the io needs + * external pull up, the pull up resistor will be very small, if so + * the power consumption will increase, so disable the internal pull + * down to save the power. + */ + at91_set_pio_pulldown(AT91_PIO_PORTE, 18, 0); + at91_set_pio_pulldown(AT91_PIO_PORTE, 19, 0); + at91_set_pio_pulldown(AT91_PIO_PORTE, 20, 0); + at91_set_pio_pulldown(AT91_PIO_PORTE, 21, 0); + at91_set_pio_pulldown(AT91_PIO_PORTE, 22, 0); + at91_set_pio_pulldown(AT91_PIO_PORTE, 23, 0); + + /* Deal with WP pin on the microSD slot. */ + at91_set_pio_output(AT91_PIO_PORTE, 16, 0); + at91_set_pio_pulldown(AT91_PIO_PORTE, 16, 1); + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_MCI1); +} + +int board_mmc_init(bd_t *bis) +{ + int ret; + + /* De-assert reset on On-SoM eMMC */ + at91_set_pio_output(AT91_PIO_PORTE, 15, 1); + at91_set_pio_pulldown(AT91_PIO_PORTE, 15, 0); + + ret = atmel_mci_init((void *)ATMEL_BASE_MCI0); + if (ret) /* eMMC init failed, skip it. */ + at91_set_pio_output(AT91_PIO_PORTE, 15, 0); + + /* Enable the power supply to On-board MicroSD */ + at91_set_pio_output(AT91_PIO_PORTE, 17, 0); + + ret = atmel_mci_init((void *)ATMEL_BASE_MCI1); + if (ret) /* uSD init failed, power it down. */ + at91_set_pio_output(AT91_PIO_PORTE, 17, 1); + + return 0; +} +#endif /* CONFIG_GENERIC_ATMEL_MCI */ + +#ifdef CONFIG_MACB +void ma5d4evk_macb0_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ETXCK_EREFCK */ + at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* ERXDV */ + at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ERX0 */ + at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ERX1 */ + at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ERXER */ + at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ETXEN */ + at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX0 */ + at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ETX1 */ + at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* EMDIO */ + at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* EMDC */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_GMAC0); +} +#endif + +static void ma5d4evk_serial_hw_init(void) +{ + /* USART0 */ + at91_set_a_periph(AT91_PIO_PORTD, 13, 1); /* TXD */ + at91_set_a_periph(AT91_PIO_PORTD, 12, 0); /* RXD */ + at91_set_a_periph(AT91_PIO_PORTD, 11, 0); /* RTS */ + at91_set_a_periph(AT91_PIO_PORTD, 10, 0); /* CTS */ + at91_periph_clk_enable(ATMEL_ID_USART0); + + /* USART1 */ + at91_set_a_periph(AT91_PIO_PORTD, 17, 1); /* TXD */ + at91_set_a_periph(AT91_PIO_PORTD, 16, 0); /* RXD */ + at91_set_a_periph(AT91_PIO_PORTD, 15, 0); /* RTS */ + at91_set_a_periph(AT91_PIO_PORTD, 14, 0); /* CTS */ + at91_periph_clk_enable(ATMEL_ID_USART1); +} + +int board_early_init_f(void) +{ + at91_periph_clk_enable(ATMEL_ID_PIOA); + at91_periph_clk_enable(ATMEL_ID_PIOB); + at91_periph_clk_enable(ATMEL_ID_PIOC); + at91_periph_clk_enable(ATMEL_ID_PIOD); + at91_periph_clk_enable(ATMEL_ID_PIOE); + + /* Configure LEDs as OFF */ + at91_set_pio_output(AT91_PIO_PORTD, 28, 0); + at91_set_pio_output(AT91_PIO_PORTD, 29, 0); + at91_set_pio_output(AT91_PIO_PORTD, 30, 0); + + /* Reset CAN controllers */ + at91_set_pio_output(AT91_PIO_PORTB, 21, 0); + udelay(100); + at91_set_pio_output(AT91_PIO_PORTB, 21, 1); + at91_set_pio_pulldown(AT91_PIO_PORTB, 21, 0); + + ma5d4evk_serial_hw_init(); + + return 0; +} + +int board_init(void) +{ + /* adress of boot parameters */ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + +#ifdef CONFIG_ATMEL_SPI + ma5d4evk_spi0_hw_init(); +#endif +#ifdef CONFIG_GENERIC_ATMEL_MCI + ma5d4evk_mci0_hw_init(); + ma5d4evk_mci1_hw_init(); +#endif +#ifdef CONFIG_MACB + ma5d4evk_macb0_hw_init(); +#endif +#ifdef CONFIG_LCD + ma5d4evk_lcd_hw_init(); +#endif +#ifdef CONFIG_CMD_USB + ma5d4evk_usb_hw_init(); +#endif +#ifdef CONFIG_USB_GADGET_ATMEL_USBA + at91_udp_hw_init(); +#endif + + return 0; +} + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, + CONFIG_SYS_SDRAM_SIZE); + return 0; +} + +int board_eth_init(bd_t *bis) +{ + int rc = 0; + +#ifdef CONFIG_MACB + rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC0, 0x00); +#endif + +#ifdef CONFIG_USB_GADGET_ATMEL_USBA + usba_udc_probe(&pdata); +#ifdef CONFIG_USB_ETH_RNDIS + usb_eth_initialize(bis); +#endif +#endif + + return rc; +} + +/* SPL */ +#ifdef CONFIG_SPL_BUILD +void spl_board_init(void) +{ + ma5d4evk_spi0_hw_init(); +} + +static void ddr2_conf(struct atmel_mpddrc_config *ddr2) +{ + ddr2->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM); + + ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 | + ATMEL_MPDDRC_CR_NR_ROW_13 | + ATMEL_MPDDRC_CR_CAS_DDR_CAS3 | + ATMEL_MPDDRC_CR_NB_8BANKS | + ATMEL_MPDDRC_CR_NDQS_DISABLED | + ATMEL_MPDDRC_CR_DECOD_INTERLEAVED | + ATMEL_MPDDRC_CR_UNAL_SUPPORTED); + + ddr2->rtr = 0x2b0; + + ddr2->tpr0 = (8 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET | + 3 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET | + 3 << ATMEL_MPDDRC_TPR0_TWR_OFFSET | + 10 << ATMEL_MPDDRC_TPR0_TRC_OFFSET | + 3 << ATMEL_MPDDRC_TPR0_TRP_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET); + + ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET | + 200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET | + 25 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET | + 23 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET); + + ddr2->tpr2 = (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET | + 2 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET | + 3 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET | + 2 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET | + 8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET); +} + +void mem_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + struct atmel_mpddrc_config ddr2; + + ddr2_conf(&ddr2); + + /* enable MPDDR clock */ + at91_periph_clk_enable(ATMEL_ID_MPDDRC); + writel(AT91_PMC_DDR, &pmc->scer); + + /* DDRAM2 Controller initialize */ + ddr2_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddr2); +} + +void at91_pmc_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + u32 tmp; + + tmp = AT91_PMC_PLLAR_29 | + AT91_PMC_PLLXR_PLLCOUNT(0x3f) | + AT91_PMC_PLLXR_MUL(87) | + AT91_PMC_PLLXR_DIV(1); + at91_plla_init(tmp); + + writel(0x0 << 8, &pmc->pllicpr); + + tmp = AT91_PMC_MCKR_H32MXDIV | + AT91_PMC_MCKR_PLLADIV_2 | + AT91_PMC_MCKR_MDIV_3 | + AT91_PMC_MCKR_CSS_PLLA; + at91_mck_init(tmp); +} +#endif diff --git a/configs/ma5d4evk_defconfig b/configs/ma5d4evk_defconfig new file mode 100644 index 0000000..88102d9 --- /dev/null +++ b/configs/ma5d4evk_defconfig @@ -0,0 +1,11 @@ +CONFIG_ARM=y +CONFIG_ARCH_AT91=y +CONFIG_TARGET_MA5D4EVK=y +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4" +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_SPI_FLASH=y diff --git a/include/configs/ma5d4evk.h b/include/configs/ma5d4evk.h new file mode 100644 index 0000000..f0d5e9d --- /dev/null +++ b/include/configs/ma5d4evk.h @@ -0,0 +1,255 @@ +/* + * DENX MA5D4 configuration + * Copyright (C) 2015 Marek Vasut + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MA5D4EVK_CONFIG_H__ +#define __MA5D4EVK_CONFIG_H__ + +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_FIT + +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ + +#include "at91-sama5_common.h" +#undef CONFIG_BOOTARGS +#define CONFIG_SYS_USE_SERIALFLASH 1 + +/* + * U-Boot Commands + */ +#define CONFIG_DOS_PARTITION +#define CONFIG_FAT_WRITE +/*#define CONFIG_LCD*/ + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_GREPENV +#define CONFIG_CMD_MII +#define CONFIG_CMD_MMC +#define CONFIG_CMD_PING +#define CONFIG_CMD_SF +#define CONFIG_CMD_USB + +/* + * Memory configurations + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS +#define CONFIG_SYS_SDRAM_SIZE 0x10000000 + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_INIT_SP_ADDR 0x210000 +#else +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) +#endif + +/* + * Environment + */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT +#define CONFIG_ENV_OFFSET 0x8000 +#define CONFIG_ENV_SIZE 0x4000 +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE +#define CONFIG_ENV_SECT_SIZE 0x1000 + +/* + * U-Boot general configurations + */ +#define CONFIG_VERSION_VARIABLE /* U-BOOT version */ + +/* + * Serial Driver + */ +#define CONFIG_ATMEL_USART +#define CONFIG_USART_BASE ATMEL_BASE_USART0 +#define CONFIG_USART_ID ATMEL_ID_USART0 + +/* + * Ethernet + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_MACB +#define CONFIG_RMII +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_MACB_SEARCH_PHY +#define CONFIG_ARP_TIMEOUT 200UL +#define CONFIG_IP_DEFRAG +#endif + +/* + * LCD + */ +#ifdef CONFIG_LCD +#define CONFIG_CMD_BMP +#define CONFIG_BMP_16BPP +#define CONFIG_BMP_24BPP +#define CONFIG_BMP_32BPP +#define LCD_BPP LCD_COLOR16 +#define LCD_OUTPUT_BPP 24 +#define CONFIG_ATMEL_HLCD +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#endif + +/* + * SD/MMC + */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#endif + +/* + * SPI NOR (boot memory) + */ +#ifdef CONFIG_CMD_SF +#define CONFIG_ATMEL_SPI +#define CONFIG_ATMEL_SPI0 +#define CONFIG_SPI_FLASH_ATMEL +#define CONFIG_SF_DEFAULT_BUS 0 +#define CONFIG_SF_DEFAULT_CS 0 +#define CONFIG_SF_DEFAULT_SPEED 30000000 +#endif + +/* + * USB + */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_ATMEL +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 +#define CONFIG_USB_STORAGE + +/* USB device */ +#define CONFIG_USB_GADGET +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET_ATMEL_USBA +#define CONFIG_USB_ETHER +#define CONFIG_USB_ETH_RNDIS +#define CONFIG_USBNET_MANUFACTURER "DENX" +#endif + +/* + * Boot Linux + */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "fitImage" +#define CONFIG_BOOTARGS "console=ttyS3,115200" +#define CONFIG_LOADADDR 0x20800000 +#define CONFIG_BOOTCOMMAND "run mmc_mmc" +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_OF_LIBFDT + +/* + * Extra Environments + */ +#define CONFIG_PREBOOT "run try_bootscript" +#define CONFIG_HOSTNAME ma5d4evk + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "consdev=ttyS3\0" \ + "baudrate=115200\0" \ + "bootscript=boot.scr\0" \ + "bootdev=/dev/mmcblk1p1\0" \ + "bootpart=1:1\0" \ + "rootdev=/dev/mmcblk1p2\0" \ + "netdev=eth0\0" \ + "kernel_addr_r=0x22000000\0" \ + "update_spi_firmware_spl_addr=0x21000000\0" \ + "update_spi_firmware_spl_filename=boot.bin\0" \ + "update_spi_firmware_addr=0x22000000\0" \ + "update_spi_firmware_filename=u-boot.img\0" \ + "update_spi_firmware=" /* Update the SPI flash firmware */ \ + "if sf probe ; then " \ + "if tftp ${update_spi_firmware_spl_addr} " \ + "${update_spi_firmware_spl_filename} ; then " \ + "setenv update_spi_firmware_spl_filesize ${filesize} ; "\ + "if tftp ${update_spi_firmware_addr} " \ + "${update_spi_firmware_filename} ; then " \ + "setenv update_spi_firmware_filesize ${filesize} ; " \ + "sf update ${update_spi_firmware_spl_addr} 0x0 " \ + "${update_spi_firmware_spl_filesize} ; " \ + "sf update ${update_spi_firmware_addr} 0x10000 " \ + "${update_spi_firmware_filesize} ; " \ + "fi ; " \ + "fi ; " \ + "fi\0" \ + "addcons=" \ + "setenv bootargs ${bootargs} " \ + "console=${consdev},${baudrate}\0" \ + "addip=" \ + "setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:" \ + "${netmask}:${hostname}:${netdev}:off\0" \ + "addmisc=" \ + "setenv bootargs ${bootargs} ${miscargs}\0" \ + "addargs=run addcons addmisc\0" \ + "mmcload=" \ + "mmc rescan ; " \ + "load mmc ${bootpart} ${kernel_addr_r} ${bootfile}\0" \ + "netload=" \ + "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \ + "miscargs=nohlt panic=1\0" \ + "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \ + "nfsargs=" \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath},v3,tcp\0" \ + "mmc_mmc=" \ + "run mmcload mmcargs addargs ; " \ + "bootm ${kernel_addr_r}\0" \ + "mmc_nfs=" \ + "run mmcload nfsargs addip addargs ; " \ + "bootm ${kernel_addr_r}\0" \ + "net_mmc=" \ + "run netload mmcargs addargs ; " \ + "bootm ${kernel_addr_r}\0" \ + "net_nfs=" \ + "run netload nfsargs addip addargs ; " \ + "bootm ${kernel_addr_r}\0" \ + "try_bootscript=" \ + "mmc rescan;" \ + "if test -e mmc ${bootpart} ${bootscript} ; then " \ + "if load mmc ${bootpart} ${kernel_addr_r} ${bootscript};"\ + "then ; " \ + "echo Running bootscript... ; " \ + "source ${kernel_addr_r} ; " \ + "fi ; " \ + "fi\0" +/* SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x200000 +#define CONFIG_SPL_MAX_SIZE 0x10000 +#define CONFIG_SPL_BSS_START_ADDR 0x20000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT + +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SYS_MONITOR_LEN (512 << 10) + +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000 + +#endif /* __MA5D4EVK_CONFIG_H__ */ -- cgit v0.10.2 From f7cf291aa788eb5b64c0d16de529b1a378f509bb Mon Sep 17 00:00:00 2001 From: Samuel Mescoff Date: Tue, 16 Feb 2016 09:45:06 +0100 Subject: ARM: at91: sama5d2: configure the L2 cache memory MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The SAMA5D2 has a second internal SRAM that can be reassigned as a L2 cache memory. Make sure it is configured as a L2 cache memory when booting from a SPL image. Based on the commit b5ea95ef2b5b from the at91bootstrap repository. Signed-off-by: Samuel Mescoff Reviewed-by: Wenyou Yang Reviewed-by: Andreas Bießmann diff --git a/arch/arm/mach-at91/atmel_sfr.c b/arch/arm/mach-at91/atmel_sfr.c index 2bccb84..adf44c6 100644 --- a/arch/arm/mach-at91/atmel_sfr.c +++ b/arch/arm/mach-at91/atmel_sfr.c @@ -19,3 +19,10 @@ void redirect_int_from_saic_to_aic(void) writel((key32 | ATMEL_SFR_AICREDIR_NSAIC), &sfr->aicredir); } } + +void configure_2nd_sram_as_l2_cache(void) +{ + struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR; + + writel(1, &sfr->l2cc_hramc); +} diff --git a/arch/arm/mach-at91/include/mach/at91_common.h b/arch/arm/mach-at91/include/mach/at91_common.h index efcd74e..0742ffc 100644 --- a/arch/arm/mach-at91/include/mach/at91_common.h +++ b/arch/arm/mach-at91/include/mach/at91_common.h @@ -34,5 +34,6 @@ void at91_spl_board_init(void); void at91_disable_wdt(void); void matrix_init(void); void redirect_int_from_saic_to_aic(void); +void configure_2nd_sram_as_l2_cache(void); #endif /* AT91_COMMON_H */ diff --git a/arch/arm/mach-at91/include/mach/sama5_sfr.h b/arch/arm/mach-at91/include/mach/sama5_sfr.h index 7b19a20..b040256 100644 --- a/arch/arm/mach-at91/include/mach/sama5_sfr.h +++ b/arch/arm/mach-at91/include/mach/sama5_sfr.h @@ -25,6 +25,7 @@ struct atmel_sfr { u32 sn0; /* 0x4c */ u32 sn1; /* 0x50 */ u32 aicredir; /* 0x54 */ + u32 l2cc_hramc; /* 0x58 */ }; /* Bit field in DDRCFG */ diff --git a/arch/arm/mach-at91/spl_atmel.c b/arch/arm/mach-at91/spl_atmel.c index b2fb51d..688289e 100644 --- a/arch/arm/mach-at91/spl_atmel.c +++ b/arch/arm/mach-at91/spl_atmel.c @@ -79,6 +79,10 @@ void board_init_f(ulong dummy) { switch_to_main_crystal_osc(); +#ifdef CONFIG_SAMA5D2 + configure_2nd_sram_as_l2_cache(); +#endif + /* disable watchdog */ at91_disable_wdt(); -- cgit v0.10.2 From 522e4fbb7676de12767b61ce89cef6656476809e Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Wed, 16 Dec 2015 17:01:44 +0100 Subject: ARM: Add Support for the VInCo platform MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Versatile Industrial Communication platform is a community oriented board from Landis + Gyr. It comes with: - an RS-485 port - 2 Ethernet ports - a wireless M-BUS - a 4G modem - a 4MB SPI flash - a 4GB eMMC Signed-off-by: Gregory CLEMENT Acked-by: Nicolas Ferre [rebase on current TOT] Signed-off-by: Andreas Bießmann diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 88ccf23..9ce775e 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -120,6 +120,11 @@ config TARGET_SMARTWEB select CPU_ARM926EJS select SUPPORT_SPL +config TARGET_VINCO + bool "Support VINCO" + select CPU_V7 + select SUPPORT_SPL + endchoice config SYS_SOC @@ -143,6 +148,7 @@ source "board/calao/usb_a9263/Kconfig" source "board/denx/ma5d4evk/Kconfig" source "board/egnite/ethernut5/Kconfig" source "board/esd/meesc/Kconfig" +source "board/l+g/vinco/Kconfig" source "board/mini-box/picosam9g45/Kconfig" source "board/ronetix/pm9261/Kconfig" source "board/ronetix/pm9263/Kconfig" diff --git a/board/l+g/vinco/Kconfig b/board/l+g/vinco/Kconfig new file mode 100644 index 0000000..229b5ea --- /dev/null +++ b/board/l+g/vinco/Kconfig @@ -0,0 +1,12 @@ +if TARGET_VINCO + +config SYS_BOARD + default "vinco" + +config SYS_VENDOR + default "l+g" + +config SYS_CONFIG_NAME + default "vinco" + +endif diff --git a/board/l+g/vinco/Makefile b/board/l+g/vinco/Makefile new file mode 100644 index 0000000..a2b8a2b --- /dev/null +++ b/board/l+g/vinco/Makefile @@ -0,0 +1 @@ +obj-y += vinco.o diff --git a/board/l+g/vinco/vinco.c b/board/l+g/vinco/vinco.c new file mode 100644 index 0000000..3d7af09 --- /dev/null +++ b/board/l+g/vinco/vinco.c @@ -0,0 +1,212 @@ +/* + * Board file for the VInCo platform + * Based on the the SAMA5-EK board file + * Configuration settings for the VInCo platform. + * Copyright (C) 2014 Atmel + * Bo Shen + * Copyright (C) 2015 Free Electrons + * Gregory CLEMENT + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_ATMEL_SPI +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return bus == 0 && cs == 0; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + at91_set_pio_output(AT91_PIO_PORTC, 3, 0); +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + at91_set_pio_output(AT91_PIO_PORTC, 3, 1); +} + +static void vinco_spi0_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */ + + at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_SPI0); +} +#endif /* CONFIG_ATMEL_SPI */ + + +#ifdef CONFIG_CMD_USB +static void vinco_usb_hw_init(void) +{ + at91_set_pio_output(AT91_PIO_PORTE, 11, 0); + at91_set_pio_output(AT91_PIO_PORTE, 12, 0); + at91_set_pio_output(AT91_PIO_PORTE, 10, 0); +} +#endif + + +#ifdef CONFIG_GENERIC_ATMEL_MCI +void vinco_mci0_hw_init(void) +{ + at91_set_b_periph(AT91_PIO_PORTC, 5, 1); /* MCI0 CDA */ + at91_set_b_periph(AT91_PIO_PORTC, 6, 1); /* MCI0 DA0 */ + at91_set_b_periph(AT91_PIO_PORTC, 7, 1); /* MCI0 DA1 */ + at91_set_b_periph(AT91_PIO_PORTC, 8, 1); /* MCI0 DA2 */ + at91_set_b_periph(AT91_PIO_PORTC, 9, 1); /* MCI0 DA3 */ + at91_set_b_periph(AT91_PIO_PORTC, 10, 1); /* MCI0 DA4 */ + at91_set_b_periph(AT91_PIO_PORTC, 11, 1); /* MCI0 DA5 */ + at91_set_b_periph(AT91_PIO_PORTC, 12, 1); /* MCI0 DA6 */ + at91_set_b_periph(AT91_PIO_PORTC, 13, 1); /* MCI0 DA7 */ + at91_set_b_periph(AT91_PIO_PORTC, 4, 0); /* MCI0 CLK */ + + /* + * As the mci io internal pull down is too strong, so if the io needs + * external pull up, the pull up resistor will be very small, if so + * the power consumption will increase, so disable the interanl pull + * down to save the power. + */ + at91_set_pio_pulldown(AT91_PIO_PORTC, 4, 0); + at91_set_pio_pulldown(AT91_PIO_PORTC, 5, 0); + at91_set_pio_pulldown(AT91_PIO_PORTC, 6, 0); + at91_set_pio_pulldown(AT91_PIO_PORTC, 7, 0); + at91_set_pio_pulldown(AT91_PIO_PORTC, 8, 0); + at91_set_pio_pulldown(AT91_PIO_PORTC, 9, 0); + at91_set_pio_pulldown(AT91_PIO_PORTC, 10, 0); + at91_set_pio_pulldown(AT91_PIO_PORTC, 11, 0); + at91_set_pio_pulldown(AT91_PIO_PORTC, 12, 0); + at91_set_pio_pulldown(AT91_PIO_PORTC, 13, 0); + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_MCI0); +} + +int board_mmc_init(bd_t *bis) +{ + /* Enable power for MCI0 interface */ + at91_set_pio_output(AT91_PIO_PORTE, 7, 1); + + return atmel_mci_init((void *)ATMEL_BASE_MCI0); +} +#endif /* CONFIG_GENERIC_ATMEL_MCI */ + +#ifdef CONFIG_MACB +void vinco_macb0_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ETXCK_EREFCK */ + at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* ERXDV */ + at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ERX0 */ + at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ERX1 */ + at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ERXER */ + at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ETXEN */ + at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX0 */ + at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ETX1 */ + at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* EMDIO */ + at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* EMDC */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_GMAC0); + + /* Enable Phy*/ + at91_set_pio_output(AT91_PIO_PORTE, 8, 1); +} +#endif + +static void vinco_serial3_hw_init(void) +{ + at91_set_b_periph(AT91_PIO_PORTE, 17, 1); /* TXD3 */ + at91_set_b_periph(AT91_PIO_PORTE, 16, 0); /* RXD3 */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_USART3); +} + +int board_early_init_f(void) +{ + at91_periph_clk_enable(ATMEL_ID_PIOA); + at91_periph_clk_enable(ATMEL_ID_PIOB); + at91_periph_clk_enable(ATMEL_ID_PIOC); + at91_periph_clk_enable(ATMEL_ID_PIOD); + at91_periph_clk_enable(ATMEL_ID_PIOE); + + vinco_serial3_hw_init(); + + return 0; +} + +int board_init(void) +{ + /* adress of boot parameters */ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + +#ifdef CONFIG_ATMEL_SPI + vinco_spi0_hw_init(); +#endif + +#ifdef CONFIG_GENERIC_ATMEL_MCI + vinco_mci0_hw_init(); +#endif +#ifdef CONFIG_MACB + vinco_macb0_hw_init(); +#endif +#ifdef CONFIG_CMD_USB + vinco_usb_hw_init(); +#endif +#ifdef CONFIG_USB_GADGET_ATMEL_USBA + at91_udp_hw_init(); +#endif + + return 0; +} + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, + CONFIG_SYS_SDRAM_SIZE); + return 0; +} + +int board_eth_init(bd_t *bis) +{ + int rc = 0; + +#ifdef CONFIG_MACB + rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC0, 0x00); +#endif + +#ifdef CONFIG_USB_GADGET_ATMEL_USBA + usba_udc_probe(&pdata); +#ifdef CONFIG_USB_ETH_RNDIS + usb_eth_initialize(bis); +#endif +#endif + + return rc; +} diff --git a/configs/vinco_defconfig b/configs/vinco_defconfig new file mode 100644 index 0000000..7cae79b --- /dev/null +++ b/configs/vinco_defconfig @@ -0,0 +1,13 @@ +CONFIG_ARM=y +CONFIG_ARCH_AT91=y +CONFIG_TARGET_VINCO=y +CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" +CONFIG_SYS_PROMPT="vinco => " +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_SPI_FLASH=y +CONFIG_NETDEVICES=y +CONFIG_ETH_DESIGNWARE=y diff --git a/include/configs/vinco.h b/include/configs/vinco.h new file mode 100644 index 0000000..92b1b4b --- /dev/null +++ b/include/configs/vinco.h @@ -0,0 +1,167 @@ +/* + * Configuration settings for the VInCo platform. + * + * Based on the settings for the SAMA5-EK board + * Copyright (C) 2014 Atmel + * Bo Shen + * Copyright (C) 2015 Free Electrons + * Gregory CLEMENT gregory.clement@free-electrons.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* No NOR flash, this definition should be put before common header */ +#define CONFIG_SYS_NO_FLASH + +#include "at91-sama5_common.h" + +/* The value in the common file is too far away for the VInCo platform */ +#ifdef CONFIG_SYS_TEXT_BASE +#undef CONFIG_SYS_TEXT_BASE +#endif +#define CONFIG_SYS_TEXT_BASE 0x20f00000 + +/* serial console */ +#define CONFIG_ATMEL_USART +#define CONFIG_USART_BASE ATMEL_BASE_USART3 +#define CONFIG_USART_ID ATMEL_ID_USART3 + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS +#define CONFIG_SYS_SDRAM_SIZE 0x4000000 + + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +/* SerialFlash */ +#define CONFIG_CMD_SF + +#ifdef CONFIG_CMD_SF +#define CONFIG_ATMEL_SPI +#define CONFIG_ATMEL_SPI0 +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SF_DEFAULT_BUS 0 +#define CONFIG_SF_DEFAULT_CS 0 +#define CONFIG_SF_DEFAULT_SPEED 50000000 +#define CONFIG_ENV_SPI_MAX_HZ 50000000 +#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) +#define CONFIG_ENV_SPI_MODE (SPI_MODE_0) +#endif + + +/* MMC */ +#define CONFIG_CMD_MMC + +#ifdef CONFIG_CMD_MMC +#define CONFIG_SUPPORT_EMMC_BOOT +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#define ATMEL_BASE_MMCI ATMEL_BASE_MCI1 +#define CONFIG_SYS_MMC_CLK_OD 500000 + +/* For generating MMC partitions */ +#define CONFIG_PARTITION_UUIDS +#define CONFIG_RANDOM_UUID +#define CONFIG_EFI_PARTITION +#define CONFIG_CMD_GPT + +#endif + +/* USB */ +#define CONFIG_CMD_USB + +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_ATMEL +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 +#define CONFIG_USB_STORAGE +#endif + +/* USB device */ +#define CONFIG_USB_GADGET +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET_ATMEL_USBA +#define CONFIG_USB_ETHER +#define CONFIG_USB_ETH_RNDIS +#define CONFIG_USBNET_MANUFACTURER "L+G VInCo" + +#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +/* Ethernet Hardware */ +#define CONFIG_CMD_MII +#define CONFIG_PHY_SMSC +#define CONFIG_MACB +#define CONFIG_RMII +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_MACB_SEARCH_PHY + + +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_SMSC95XX +#define CONFIG_USB_ETHER_RNDIS + + +#ifdef CONFIG_SYS_USE_SERIALFLASH +/* bootstrap + u-boot + env + linux in serial flash */ +#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS +#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS +/* Use our own mapping for the VInCo platform */ +#undef CONFIG_ENV_OFFSET +#undef CONFIG_ENV_SIZE + +#define CONFIG_ENV_OFFSET 0x10000 +#define CONFIG_ENV_SIZE 0x10000 + +/* Update the bootcommand according to our mapping for the VInCo platform */ +#undef CONFIG_BOOTCOMMAND +#define CONFIG_BOOTCOMMAND "mmc dev 0 0;" \ + "mmc read ${loadaddr} ${k_offset} ${k_blksize};" \ + "mmc read ${oftaddr} ${dtb_offset} ${dtb_blksize};" \ + "bootz ${loadaddr} - ${oftaddr}" + +#undef CONFIG_BOOTARGS +#define CONFIG_BOOTARGS "console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootfstype=ext4 rootwait quiet lpj=1990656" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "kernel_start=0x20000\0" \ + "kernel_size=0x800000\0" \ + "mmcblksize=0x200\0" \ + "oftaddr=0x21000000\0" \ + "loadaddr=0x22000000\0" \ + "update_uboot=tftp ${loadaddr} u-boot.bin;sf probe 0;" \ + "sf erase 0x20000 0x4B000; sf write ${loadaddr} 0x20000 0x4B000\0" \ + "create_partition=setexpr dtb_start ${kernel_start} + 0x400000;" \ + "setexpr rootfs_start ${kernel_start} + ${kernel_size};" \ + "setenv partitions 'name=kernel,size=${kernel_size}," \ + "start=${kernel_start};name=rootfs,size=-';" \ + "gpt write mmc 0 ${partitions} \0"\ + "f2blk_size=setexpr fileblksize ${filesize} / ${mmcblksize};" \ + "setexpr fileblksize ${fileblksize} + 1\0" \ + "store_kernel=tftp ${loadaddr} zImage; run f2blk_size;" \ + "setexpr k_blksize ${fileblksize};" \ + "setexpr k_offset ${kernel_start} / ${mmcblksize};" \ + "mmc write ${fileaddr} ${k_offset} ${fileblksize}\0" \ + "store_dtb=tftp ${loadaddr} at91-vinco.dtb; run f2blk_size;" \ + "setexpr dtb_blksize ${fileblksize};" \ + "setexpr dtb_offset ${dtb_start} / ${mmcblksize};" \ + "mmc write ${fileaddr} ${dtb_offset} ${fileblksize}\0" \ + "store_rootfs=tftp ${loadaddr} vinco-gateway-image-vinco.ext4;" \ + "setexpr rootfs_offset ${rootfs_start} / ${mmcblksize};" \ + "mmc write ${fileaddr} ${rootfs_offset} ${fileblksize}\0" \ + "bootdelay=0\0" + +#endif +#define CONFIG_ZERO_BOOTDELAY_CHECK + +#endif -- cgit v0.10.2 From 2a0b9ea3067b00366455b0504056cb6728a0b865 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andreas=20Bie=C3=9Fmann?= Date: Sat, 20 Feb 2016 21:39:36 +0100 Subject: vinco: add Maintainers file MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Andreas Bießmann Cc: Gregory CLEMENT diff --git a/board/l+g/vinco/MAINTAINERS b/board/l+g/vinco/MAINTAINERS new file mode 100644 index 0000000..0cd6044 --- /dev/null +++ b/board/l+g/vinco/MAINTAINERS @@ -0,0 +1,6 @@ +VInCo Platform +M: Gregory CLEMENT +S: Maintained +F: board/l+g/vinco +F: include/configs/vinco.h +F: configs/vinco_defconfig -- cgit v0.10.2