From 5a6ff3cfb56e2f93b88a272e8b70acb2a60ead68 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 7 May 2017 15:51:17 +0800 Subject: sunxi: Use uart0 as console for Sinlinx SinA33 On the A33, uart0 is muxed on the PB pins. On SBCs these pins may be available for use. Such is the case on the Sinlinx SinA33. Set CONS_INDEX=1 to use uart0 as the console, matching the device tree. Fixes: 7095f8641863 ("sunxi: Convert CONS_INDEX to Kconfig") Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Reviewed-by: Jagan Teki diff --git a/configs/Sinlinx_SinA33_defconfig b/configs/Sinlinx_SinA33_defconfig index 8a51bf3..d1b5b22 100644 --- a/configs/Sinlinx_SinA33_defconfig +++ b/configs/Sinlinx_SinA33_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y +CONFIG_CONS_INDEX=1 CONFIG_MACH_SUN8I_A33=y CONFIG_DRAM_CLK=552 CONFIG_DRAM_ZQ=15291 -- cgit v0.10.2 From a647ea172abf764aaef23120b8cb2c0a807fc6fe Mon Sep 17 00:00:00 2001 From: Mylene JOSSERAND Date: Wed, 10 May 2017 08:26:07 +0200 Subject: sunxi: Add support for NanoPi M1 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit NanoPi M1 is a board based on Allwinner H3 CPU. This commit adds the support for this platform with: - an include device tree which enables UART, LEDs, GPIO key switch, 1 USB host ports and the SD-card as a dtsi file. - a device tree specific to this board that enables the 2 additional USB ports - a defconfig file for minimal support - a section in MAINTAINERS (add myself) Synchronized with the kernel device tree, from commits: sun8i-nanopi.dtsi: 85d2913614d9ab899d23b7ab7d22d23cf45bd1de sun8i-h3-nanopi-m1.dts: 10efbf5f16336b7540ad6a16aa1cb0b26bab033b Signed-off-by: Mylène Josserand Reviewed-by: Jagan Teki diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index e2c2584..f2e5921 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -307,6 +307,7 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \ sun8i-h3-orangepi-pc-plus.dtb \ sun8i-h3-orangepi-plus.dtb \ sun8i-h3-orangepi-plus2e.dtb \ + sun8i-h3-nanopi-m1.dtb \ sun8i-h3-nanopi-neo.dtb \ sun8i-h3-nanopi-neo-air.dtb dtb-$(CONFIG_MACH_SUN8I_R40) += \ diff --git a/arch/arm/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/dts/sun8i-h3-nanopi-m1.dts new file mode 100644 index 0000000..ec63d10 --- /dev/null +++ b/arch/arm/dts/sun8i-h3-nanopi-m1.dts @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2016 Milo Kim + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sun8i-h3-nanopi.dtsi" + +/ { + model = "FriendlyArm NanoPi M1"; + compatible = "friendlyarm,nanopi-m1", "allwinner,sun8i-h3"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-h3-nanopi.dtsi b/arch/arm/dts/sun8i-h3-nanopi.dtsi new file mode 100644 index 0000000..c6decee --- /dev/null +++ b/arch/arm/dts/sun8i-h3-nanopi.dtsi @@ -0,0 +1,137 @@ +/* + * Copyright (C) 2016 James Pettigrew + * Copyright (C) 2016 Milo Kim + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include + +/ { + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_npi>, <&leds_r_npi>; + + status { + label = "nanopi:blue:status"; + gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + pwr { + label = "nanopi:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + r_gpio_keys { + compatible = "gpio-keys"; + input-name = "k1"; + pinctrl-names = "default"; + pinctrl-0 = <&sw_r_npi>; + + k1@0 { + label = "k1"; + linux,code = ; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&ehci3 { + status = "okay"; +}; + +&mmc0 { + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; + cd-inverted; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + status = "okay"; + vmmc-supply = <®_vcc3v3>; +}; + +&ohci3 { + status = "okay"; +}; + +&pio { + leds_npi: led_pins@0 { + pins = "PA10"; + function = "gpio_out"; + }; +}; + +&r_pio { + leds_r_npi: led_pins@0 { + pins = "PL10"; + function = "gpio_out"; + }; + + sw_r_npi: key_pins@0 { + pins = "PL3"; + function = "gpio_in"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index a512a20..a4bbbd1 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -237,6 +237,11 @@ M: Siarhei Siamashka S: Maintained F: configs/MSI_Primo81_defconfig +NANOPI-M1 BOARD +M: Mylène Josserand +S: Maintained +F: configs/nanopi_m1_defconfig + NANOPI-NEO BOARD M: Jelle van der Waa S: Maintained diff --git a/configs/nanopi_m1_defconfig b/configs/nanopi_m1_defconfig new file mode 100644 index 0000000..498496b --- /dev/null +++ b/configs/nanopi_m1_defconfig @@ -0,0 +1,16 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN8I_H3=y +CONFIG_DRAM_CLK=408 +CONFIG_DRAM_ZQ=3881979 +CONFIG_DRAM_ODT_EN=y +CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-m1" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_ISO_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_USB_EHCI_HCD=y -- cgit v0.10.2 From 6ff02fba04c5f574682765ef51ad4e8d1a0388c9 Mon Sep 17 00:00:00 2001 From: Mylene JOSSERAND Date: Wed, 10 May 2017 08:26:08 +0200 Subject: sunxi: Update NanoPi Neo to use dtsi MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Update the NanoPi Neo device tree file to use the NanoPi dtsi. Signed-off-by: Mylène Josserand Reviewed-by: Jagan Teki diff --git a/arch/arm/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/dts/sun8i-h3-nanopi-neo.dts index 096ff0b..5113059 100644 --- a/arch/arm/dts/sun8i-h3-nanopi-neo.dts +++ b/arch/arm/dts/sun8i-h3-nanopi-neo.dts @@ -40,88 +40,11 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/dts-v1/; -#include "sun8i-h3.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include -#include +#include "sun8i-h3-nanopi.dtsi" / { model = "FriendlyARM NanoPi NEO"; compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>, <&leds_r_opc>; - - pwr { - label = "nanopi:green:pwr"; - gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ - default-state = "on"; - }; - - status { - label = "nanopi:blue:status"; - gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */ - }; - }; -}; - -&ehci3 { - status = "okay"; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; - status = "okay"; -}; - -&ohci3 { - status = "okay"; -}; - -&pio { - leds_opc: led-pins { - allwinner,pins = "PA10"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; -}; - -&r_pio { - leds_r_opc: led-pins { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; - -&usbphy { - /* USB VBUS is always on */ - status = "okay"; }; &emac { -- cgit v0.10.2 From f98852bfa9a99d7258eb06e4849e5c3d075f44cf Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Wed, 24 May 2017 10:34:56 +0100 Subject: sunxi: A64/Pine64: update device tree from Linux The Linux device tree for the Allwinner A64 SoC has changed a lot since the U-Boot version was merged. Let's replace the current DT with a exact copy of the Linux one as of: commit c6778ff813d2ca3e3c8733c87dc8b6831a64578b Merge: 0ff4c01 3c0e3abd Author: Linus Torvalds Date: Tue May 9 10:07:33 2017 -0700 This is the DT used in Linux 4.12-rc1. Since U-Boot has an Ethernet driver (while Linux does not yet), we provide the required DT nodes for it in an ...-u-boot.dtsi file, to both mark them as U-Boot specific and to allow easier upgrading once Linux gets the driver and its own binding later. Compared to the existing Ethernet DT nodes we just slightly tweak the clock and reset nodes in there to match the new bindings used by Linux for those. Signed-off-by: Andre Przywara Acked-by: Maxime Ripard Reviewed-by: Jagan Teki Tested-by: Jagan Teki diff --git a/arch/arm/dts/sun50i-a64-pine64-common.dtsi b/arch/arm/dts/sun50i-a64-pine64-common.dtsi deleted file mode 100644 index 9ec81c6..0000000 --- a/arch/arm/dts/sun50i-a64-pine64-common.dtsi +++ /dev/null @@ -1,93 +0,0 @@ -/* - * Copyright (c) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -#include "sun50i-a64.dtsi" - -/ { - - aliases { - serial0 = &uart0; - ethernet0 = &emac; - }; - - soc { - reg_vcc3v3: vcc3v3 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>, <&mmc0_default_cd_pin>; - vmmc-supply = <®_vcc3v3>; - cd-gpios = <&pio 5 6 0>; - cd-inverted; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; diff --git a/arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi b/arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi new file mode 100644 index 0000000..9c61bea --- /dev/null +++ b/arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi @@ -0,0 +1,50 @@ +/ { + aliases { + ethernet0 = &emac; + }; + + soc { + emac: ethernet@01c30000 { + compatible = "allwinner,sun50i-a64-emac"; + reg = <0x01c30000 0x2000>, <0x01c00030 0x4>; + reg-names = "emac", "syscon"; + interrupts = ; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "ahb"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "ahb"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii"; + phy = <&phy1>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; +}; + +&pio { + rmii_pins: rmii_pins { + allwinner,pins = "PD10", "PD11", "PD13", "PD14", + "PD17", "PD18", "PD19", "PD20", + "PD22", "PD23"; + allwinner,function = "emac"; + allwinner,drive = <3>; + allwinner,pull = <0>; + }; + + rgmii_pins: rgmii_pins { + allwinner,pins = "PD8", "PD9", "PD10", "PD11", + "PD12", "PD13", "PD15", + "PD16", "PD17", "PD18", "PD19", + "PD20", "PD21", "PD22", "PD23"; + allwinner,function = "emac"; + allwinner,drive = <3>; + allwinner,pull = <0>; + }; +}; diff --git a/arch/arm/dts/sun50i-a64-pine64-plus.dts b/arch/arm/dts/sun50i-a64-pine64-plus.dts index 389c609..790d14d 100644 --- a/arch/arm/dts/sun50i-a64-pine64-plus.dts +++ b/arch/arm/dts/sun50i-a64-pine64-plus.dts @@ -40,33 +40,11 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/dts-v1/; - -#include "sun50i-a64-pine64-common.dtsi" +#include "sun50i-a64-pine64.dts" / { model = "Pine64+"; compatible = "pine64,pine64-plus", "allwinner,sun50i-a64"; - chosen { - stdout-path = "serial0:115200n8"; - }; - - /* There is a model with 2GB of DRAM, but U-Boot fixes this for us. */ - memory { - reg = <0x40000000 0x40000000>; - }; -}; - -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii"; - phy = <&phy1>; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; + /* TODO: Camera, Ethernet PHY, touchscreen, etc. */ }; - diff --git a/arch/arm/dts/sun50i-a64-pine64.dts b/arch/arm/dts/sun50i-a64-pine64.dts index ebe029e..c680ed3 100644 --- a/arch/arm/dts/sun50i-a64-pine64.dts +++ b/arch/arm/dts/sun50i-a64-pine64.dts @@ -42,17 +42,70 @@ /dts-v1/; -#include "sun50i-a64-pine64-common.dtsi" +#include "sun50i-a64.dtsi" + +#include / { model = "Pine64"; compatible = "pine64,pine64", "allwinner,sun50i-a64"; + aliases { + serial0 = &uart0; + }; + chosen { stdout-path = "serial0:115200n8"; }; - memory { - reg = <0x40000000 0x20000000>; + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; }; }; + +&ehci1 { + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; +}; + +&i2c1_pins { + bias-pull-up; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_vcc3v3>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; + cd-inverted; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi index bef0d00..c7f669f 100644 --- a/arch/arm/dts/sun50i-a64.dtsi +++ b/arch/arm/dts/sun50i-a64.dtsi @@ -42,8 +42,9 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include #include -#include +#include / { interrupt-parent = <&gic>; @@ -54,28 +55,28 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a53", "arm,armv8"; device_type = "cpu"; reg = <0>; enable-method = "psci"; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a53", "arm,armv8"; device_type = "cpu"; reg = <1>; enable-method = "psci"; }; - cpu@2 { + cpu2: cpu@2 { compatible = "arm,cortex-a53", "arm,armv8"; device_type = "cpu"; reg = <2>; enable-method = "psci"; }; - cpu@3 { + cpu3: cpu@3 { compatible = "arm,cortex-a53", "arm,armv8"; device_type = "cpu"; reg = <3>; @@ -83,28 +84,31 @@ }; }; - psci { - compatible = "arm,psci-0.2"; - method = "smc"; + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; }; - memory { - device_type = "memory"; - reg = <0x40000000 0>; + iosc: internal-osc-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <16000000>; + clock-accuracy = <300000000>; + clock-output-names = "iosc"; }; - gic: interrupt-controller@1c81000 { - compatible = "arm,gic-400"; - interrupt-controller; - #interrupt-cells = <3>; - #address-cells = <0>; - - reg = <0x01c81000 0x1000>, - <0x01c82000 0x2000>, - <0x01c84000 0x2000>, - <0x01c86000 0x2000>; - interrupts = ; + psci { + compatible = "arm,psci-0.2"; + method = "smc"; }; timer { @@ -119,199 +123,6 @@ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - osc24M: osc24M_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "osc24M"; - }; - - osc32k: osc32k_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "osc32k"; - }; - - pll1: pll1_clk@1c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun8i-a23-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - pll6: pll6_clk@1c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun6i-a31-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6", "pll6x2"; - }; - - pll6d2: pll6d2_clk { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <2>; - clock-mult = <1>; - clocks = <&pll6 0>; - clock-output-names = "pll6d2"; - }; - - pll7: pll7_clk@1c2002c { - #clock-cells = <1>; - compatible = "allwinner,sun6i-a31-pll6-clk"; - reg = <0x01c2002c 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll7", "pll7x2"; - }; - - cpu: cpu_clk@1c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20050 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; - clock-output-names = "cpu"; - critical-clocks = <0>; - }; - - axi: axi_clk@1c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-axi-clk"; - reg = <0x01c20050 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - ahb1: ahb1_clk@1c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun6i-a31-ahb1-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; - clock-output-names = "ahb1"; - }; - - ahb2: ahb2_clk@1c2005c { - #clock-cells = <0>; - compatible = "allwinner,sun8i-h3-ahb2-clk"; - reg = <0x01c2005c 0x4>; - clocks = <&ahb1>, <&pll6d2>; - clock-output-names = "ahb2"; - }; - - apb1: apb1_clk@1c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb1>; - clock-output-names = "apb1"; - }; - - apb2: apb2_clk@1c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll6 1>, <&pll6 1>; - clock-output-names = "apb2"; - }; - - bus_gates: bus_gates_clk@1c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun50i-a64-bus-gates-clk", - "allwinner,sunxi-multi-bus-gates-clk"; - reg = <0x01c20060 0x14>; - ahb1_parent { - clocks = <&ahb1>; - clock-indices = <1>, <5>, - <6>, <8>, - <9>, <10>, - <13>, <14>, - <18>, <19>, - <20>, <21>, - <23>, <24>, - <25>, <28>, - <32>, <35>, - <36>, <37>, - <40>, <43>, - <44>, <52>, - <53>, <54>, - <135>; - clock-output-names = "bus_mipidsi", "bus_ce", - "bus_dma", "bus_mmc0", - "bus_mmc1", "bus_mmc2", - "bus_nand", "bus_sdram", - "bus_ts", "bus_hstimer", - "bus_spi0", "bus_spi1", - "bus_otg", "bus_otg_ehci0", - "bus_ehci0", "bus_otg_ohci0", - "bus_ve", "bus_lcd0", - "bus_lcd1", "bus_deint", - "bus_csi", "bus_hdmi", - "bus_de", "bus_gpu", - "bus_msgbox", "bus_spinlock", - "bus_dbg"; - }; - ahb2_parent { - clocks = <&ahb2>; - clock-indices = <17>, <29>; - clock-output-names = "bus_gmac", "bus_ohci0"; - }; - apb1_parent { - clocks = <&apb1>; - clock-indices = <64>, <65>, - <69>, <72>, - <76>, <77>, - <78>; - clock-output-names = "bus_codec", "bus_spdif", - "bus_pio", "bus_ths", - "bus_i2s0", "bus_i2s1", - "bus_i2s2"; - }; - abp2_parent { - clocks = <&apb2>; - clock-indices = <96>, <97>, - <98>, <101>, - <112>, <113>, - <114>, <115>, - <116>; - clock-output-names = "bus_i2c0", "bus_i2c1", - "bus_i2c2", "bus_scr", - "bus_uart0", "bus_uart1", - "bus_uart2", "bus_uart3", - "bus_uart4"; - }; - }; - - mmc0_clk: mmc0_clk@1c20088 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll7 1>; - clock-output-names = "mmc0"; - }; - - mmc1_clk: mmc1_clk@1c2008c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll7 1>; - clock-output-names = "mmc1"; - }; - - mmc2_clk: mmc2_clk@1c20090 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll7 1>; - clock-output-names = "mmc2"; - }; - }; - soc { compatible = "simple-bus"; #address-cells = <1>; @@ -319,240 +130,181 @@ ranges; mmc0: mmc@1c0f000 { - compatible = "allwinner,sun50i-a64-mmc", - "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun50i-a64-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&bus_gates 8>, <&mmc0_clk>, - <&mmc0_clk>, <&mmc0_clk>; - clock-names = "ahb", "mmc", - "output", "sample"; - resets = <&ahb_rst 8>; + clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC0>; reset-names = "ahb"; interrupts = ; + max-frequency = <150000000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; mmc1: mmc@1c10000 { - compatible = "allwinner,sun50i-a64-mmc", - "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun50i-a64-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&bus_gates 9>, <&mmc1_clk>, - <&mmc1_clk>, <&mmc1_clk>; - clock-names = "ahb", "mmc", - "output", "sample"; - resets = <&ahb_rst 9>; + clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC1>; reset-names = "ahb"; interrupts = ; + max-frequency = <150000000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; mmc2: mmc@1c11000 { - compatible = "allwinner,sun50i-a64-mmc", - "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun50i-a64-emmc"; reg = <0x01c11000 0x1000>; - clocks = <&bus_gates 10>, <&mmc2_clk>, - <&mmc2_clk>, <&mmc2_clk>; - clock-names = "ahb", "mmc", - "output", "sample"; - resets = <&ahb_rst 10>; + clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC2>; reset-names = "ahb"; interrupts = ; + max-frequency = <200000000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; + usb_otg: usb@01c19000 { + compatible = "allwinner,sun8i-a33-musb"; + reg = <0x01c19000 0x0400>; + clocks = <&ccu CLK_BUS_OTG>; + resets = <&ccu RST_BUS_OTG>; + interrupts = ; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + status = "disabled"; + }; + + usbphy: phy@01c19400 { + compatible = "allwinner,sun50i-a64-usb-phy"; + reg = <0x01c19400 0x14>, + <0x01c1a800 0x4>, + <0x01c1b800 0x4>; + reg-names = "phy_ctrl", + "pmu0", + "pmu1"; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>; + clock-names = "usb0_phy", + "usb1_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>; + reset-names = "usb0_reset", + "usb1_reset"; + status = "disabled"; + #phy-cells = <1>; + }; + + ehci1: usb@01c1b000 { + compatible = "allwinner,sun50i-a64-ehci", "generic-ehci"; + reg = <0x01c1b000 0x100>; + interrupts = ; + clocks = <&ccu CLK_BUS_OHCI1>, + <&ccu CLK_BUS_EHCI1>, + <&ccu CLK_USB_OHCI1>; + resets = <&ccu RST_BUS_OHCI1>, + <&ccu RST_BUS_EHCI1>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci1: usb@01c1b400 { + compatible = "allwinner,sun50i-a64-ohci", "generic-ohci"; + reg = <0x01c1b400 0x100>; + interrupts = ; + clocks = <&ccu CLK_BUS_OHCI1>, + <&ccu CLK_USB_OHCI1>; + resets = <&ccu RST_BUS_OHCI1>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ccu: clock@01c20000 { + compatible = "allwinner,sun50i-a64-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + pio: pinctrl@1c20800 { compatible = "allwinner,sun50i-a64-pinctrl"; reg = <0x01c20800 0x400>; interrupts = , , ; - clocks = <&bus_gates 69>; + clocks = <&ccu 58>; gpio-controller; #gpio-cells = <3>; interrupt-controller; - #interrupt-cells = <2>; - - uart0_pins_a: uart0@0 { - allwinner,pins = "PB8", "PB9"; - allwinner,function = "uart0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - uart0_pins_b: uart0@1 { - allwinner,pins = "PF2", "PF3"; - allwinner,function = "uart0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - uart1_2pins: uart1_2@0 { - allwinner,pins = "PG6", "PG7"; - allwinner,function = "uart1"; - allwinner,drive = ; - allwinner,pull = ; - }; - - uart1_4pins: uart1_4@0 { - allwinner,pins = "PG6", "PG7", "PG8", "PG9"; - allwinner,function = "uart1"; - allwinner,drive = ; - allwinner,pull = ; - }; - - uart2_2pins: uart2_2@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "uart2"; - allwinner,drive = ; - allwinner,pull = ; - }; - - uart2_4pins: uart2_4@0 { - allwinner,pins = "PB0", "PB1", "PB2", "PB3"; - allwinner,function = "uart2"; - allwinner,drive = ; - allwinner,pull = ; - }; - - uart3_pins_a: uart3@0 { - allwinner,pins = "PD0", "PD1"; - allwinner,function = "uart3"; - allwinner,drive = ; - allwinner,pull = ; - }; - - uart3_2pins_b: uart3_2@1 { - allwinner,pins = "PH4", "PH5"; - allwinner,function = "uart3"; - allwinner,drive = ; - allwinner,pull = ; - }; + #interrupt-cells = <3>; - uart3_4pins_b: uart3_4@1 { - allwinner,pins = "PH4", "PH5", "PH6", "PH7"; - allwinner,function = "uart3"; - allwinner,drive = ; - allwinner,pull = ; - }; - - uart4_2pins: uart4_2@0 { - allwinner,pins = "PD2", "PD3"; - allwinner,function = "uart4"; - allwinner,drive = ; - allwinner,pull = ; - }; - - uart4_4pins: uart4_4@0 { - allwinner,pins = "PD2", "PD3", "PD4", "PD5"; - allwinner,function = "uart4"; - allwinner,drive = ; - allwinner,pull = ; - }; - - mmc0_pins: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", "PF3", - "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = ; - allwinner,pull = ; - }; - - mmc0_default_cd_pin: mmc0_cd_pin@0 { - allwinner,pins = "PF6"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - mmc1_pins: mmc1@0 { - allwinner,pins = "PG0", "PG1", "PG2", "PG3", - "PG4", "PG5"; - allwinner,function = "mmc1"; - allwinner,drive = ; - allwinner,pull = ; + i2c1_pins: i2c1_pins { + pins = "PH2", "PH3"; + function = "i2c1"; }; - mmc2_pins: mmc2@0 { - allwinner,pins = "PC1", "PC5", "PC6", "PC8", - "PC9", "PC10"; - allwinner,function = "mmc2"; - allwinner,drive = ; - allwinner,pull = ; + mmc0_pins: mmc0-pins { + pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; - i2c0_pins: i2c0_pins { - allwinner,pins = "PH0", "PH1"; - allwinner,function = "i2c0"; - allwinner,drive = ; - allwinner,pull = ; + mmc1_pins: mmc1-pins { + pins = "PG0", "PG1", "PG2", "PG3", + "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; }; - i2c1_pins: i2c1_pins { - allwinner,pins = "PH2", "PH3"; - allwinner,function = "i2c1"; - allwinner,drive = ; - allwinner,pull = ; + mmc2_pins: mmc2-pins { + pins = "PC1", "PC5", "PC6", "PC8", "PC9", + "PC10","PC11", "PC12", "PC13", + "PC14", "PC15", "PC16"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; }; - i2c2_pins: i2c2_pins { - allwinner,pins = "PE14", "PE15"; - allwinner,function = "i2c2"; - allwinner,drive = ; - allwinner,pull = ; + uart0_pins_a: uart0@0 { + pins = "PB8", "PB9"; + function = "uart0"; }; - rmii_pins: rmii_pins { - allwinner,pins = "PD10", "PD11", "PD13", "PD14", - "PD17", "PD18", "PD19", "PD20", - "PD22", "PD23"; - allwinner,function = "emac"; - allwinner,drive = ; - allwinner,pull = ; + uart1_pins: uart1_pins { + pins = "PG6", "PG7"; + function = "uart1"; }; - rgmii_pins: rgmii_pins { - allwinner,pins = "PD8", "PD9", "PD10", "PD11", - "PD12", "PD13", "PD15", - "PD16", "PD17", "PD18", "PD19", - "PD20", "PD21", "PD22", "PD23"; - allwinner,function = "emac"; - allwinner,drive = ; - allwinner,pull = ; + uart1_rts_cts_pins: uart1_rts_cts_pins { + pins = "PG8", "PG9"; + function = "uart1"; }; }; - ahb_rst: reset@1c202c0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x01c202c0 0xc>; - }; - - apb1_rst: reset@1c202d0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x01c202d0 0x4>; - }; - - apb2_rst: reset@1c202d8 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x01c202d8 0x4>; - }; - uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&bus_gates 112>; - resets = <&apb2_rst 16>; + clocks = <&ccu 67>; + resets = <&ccu 46>; status = "disabled"; }; @@ -562,8 +314,8 @@ interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&bus_gates 113>; - resets = <&apb2_rst 17>; + clocks = <&ccu 68>; + resets = <&ccu 47>; status = "disabled"; }; @@ -573,8 +325,8 @@ interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&bus_gates 114>; - resets = <&apb2_rst 18>; + clocks = <&ccu 69>; + resets = <&ccu 48>; status = "disabled"; }; @@ -584,8 +336,8 @@ interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&bus_gates 115>; - resets = <&apb2_rst 19>; + clocks = <&ccu 70>; + resets = <&ccu 49>; status = "disabled"; }; @@ -595,24 +347,17 @@ interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&bus_gates 116>; - resets = <&apb2_rst 20>; + clocks = <&ccu 71>; + resets = <&ccu 50>; status = "disabled"; }; - rtc: rtc@1f00000 { - compatible = "allwinner,sun6i-a31-rtc"; - reg = <0x01f00000 0x54>; - interrupts = , - ; - }; - i2c0: i2c@1c2ac00 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2ac00 0x400>; interrupts = ; - clocks = <&bus_gates 96>; - resets = <&apb2_rst 0>; + clocks = <&ccu 63>; + resets = <&ccu 42>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -622,8 +367,8 @@ compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b000 0x400>; interrupts = ; - clocks = <&bus_gates 97>; - resets = <&apb2_rst 1>; + clocks = <&ccu 64>; + resets = <&ccu 43>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -633,54 +378,50 @@ compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b400 0x400>; interrupts = ; - clocks = <&bus_gates 98>; - resets = <&apb2_rst 2>; + clocks = <&ccu 65>; + resets = <&ccu 44>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - emac: ethernet@01c30000 { - compatible = "allwinner,sun50i-a64-emac"; - reg = <0x01c30000 0x2000>, <0x01c00030 0x4>; - reg-names = "emac", "syscon"; - interrupts = ; - resets = <&ahb_rst 17>; - reset-names = "ahb"; - clocks = <&bus_gates 17>; - clock-names = "ahb"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; + gic: interrupt-controller@1c81000 { + compatible = "arm,gic-400"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x2000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; }; - usbphy: phy@1c1b810 { - compatible = "allwinner,sun50i-a64-usb-phy", - "allwinner,sun8i-a33-usb-phy"; - reg = <0x01c1b810 0x14>, <0x01c1b800 0x4>; - reg-names = "phy_ctrl", "pmu1"; - status = "disabled"; - #phy-cells = <1>; + rtc: rtc@1f00000 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01f00000 0x54>; + interrupts = , + ; }; - ehci1: usb@01c1b000 { - compatible = "allwinner,sun50i-a64-ehci", - "generic-ehci"; - reg = <0x01c1b000 0x100>; - interrupts = ; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; + r_ccu: clock@1f01400 { + compatible = "allwinner,sun50i-a64-r-ccu"; + reg = <0x01f01400 0x100>; + clocks = <&osc24M>, <&osc32k>, <&iosc>; + clock-names = "hosc", "losc", "iosc"; + #clock-cells = <1>; + #reset-cells = <1>; }; - ohci1: usb@01c1b400 { - compatible = "allwinner,sun50i-a64-ohci", - "generic-ohci"; - reg = <0x01c1b400 0x100>; - interrupts = ; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "enabled"; + r_pio: pinctrl@01f02c00 { + compatible = "allwinner,sun50i-a64-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = ; + clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; }; }; }; diff --git a/include/dt-bindings/clock/sun50i-a64-ccu.h b/include/dt-bindings/clock/sun50i-a64-ccu.h new file mode 100644 index 0000000..370c0a0 --- /dev/null +++ b/include/dt-bindings/clock/sun50i-a64-ccu.h @@ -0,0 +1,134 @@ +/* + * Copyright (C) 2016 Maxime Ripard + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_CLK_SUN50I_A64_H_ +#define _DT_BINDINGS_CLK_SUN50I_A64_H_ + +#define CLK_BUS_MIPI_DSI 28 +#define CLK_BUS_CE 29 +#define CLK_BUS_DMA 30 +#define CLK_BUS_MMC0 31 +#define CLK_BUS_MMC1 32 +#define CLK_BUS_MMC2 33 +#define CLK_BUS_NAND 34 +#define CLK_BUS_DRAM 35 +#define CLK_BUS_EMAC 36 +#define CLK_BUS_TS 37 +#define CLK_BUS_HSTIMER 38 +#define CLK_BUS_SPI0 39 +#define CLK_BUS_SPI1 40 +#define CLK_BUS_OTG 41 +#define CLK_BUS_EHCI0 42 +#define CLK_BUS_EHCI1 43 +#define CLK_BUS_OHCI0 44 +#define CLK_BUS_OHCI1 45 +#define CLK_BUS_VE 46 +#define CLK_BUS_TCON0 47 +#define CLK_BUS_TCON1 48 +#define CLK_BUS_DEINTERLACE 49 +#define CLK_BUS_CSI 50 +#define CLK_BUS_HDMI 51 +#define CLK_BUS_DE 52 +#define CLK_BUS_GPU 53 +#define CLK_BUS_MSGBOX 54 +#define CLK_BUS_SPINLOCK 55 +#define CLK_BUS_CODEC 56 +#define CLK_BUS_SPDIF 57 +#define CLK_BUS_PIO 58 +#define CLK_BUS_THS 59 +#define CLK_BUS_I2S0 60 +#define CLK_BUS_I2S1 61 +#define CLK_BUS_I2S2 62 +#define CLK_BUS_I2C0 63 +#define CLK_BUS_I2C1 64 +#define CLK_BUS_I2C2 65 +#define CLK_BUS_SCR 66 +#define CLK_BUS_UART0 67 +#define CLK_BUS_UART1 68 +#define CLK_BUS_UART2 69 +#define CLK_BUS_UART3 70 +#define CLK_BUS_UART4 71 +#define CLK_BUS_DBG 72 +#define CLK_THS 73 +#define CLK_NAND 74 +#define CLK_MMC0 75 +#define CLK_MMC1 76 +#define CLK_MMC2 77 +#define CLK_TS 78 +#define CLK_CE 79 +#define CLK_SPI0 80 +#define CLK_SPI1 81 +#define CLK_I2S0 82 +#define CLK_I2S1 83 +#define CLK_I2S2 84 +#define CLK_SPDIF 85 +#define CLK_USB_PHY0 86 +#define CLK_USB_PHY1 87 +#define CLK_USB_HSIC 88 +#define CLK_USB_HSIC_12M 89 + +#define CLK_USB_OHCI0 91 + +#define CLK_USB_OHCI1 93 + +#define CLK_DRAM_VE 95 +#define CLK_DRAM_CSI 96 +#define CLK_DRAM_DEINTERLACE 97 +#define CLK_DRAM_TS 98 +#define CLK_DE 99 +#define CLK_TCON0 100 +#define CLK_TCON1 101 +#define CLK_DEINTERLACE 102 +#define CLK_CSI_MISC 103 +#define CLK_CSI_SCLK 104 +#define CLK_CSI_MCLK 105 +#define CLK_VE 106 +#define CLK_AC_DIG 107 +#define CLK_AC_DIG_4X 108 +#define CLK_AVS 109 +#define CLK_HDMI 110 +#define CLK_HDMI_DDC 111 + +#define CLK_DSI_DPHY 113 +#define CLK_GPU 114 + +#endif /* _DT_BINDINGS_CLK_SUN50I_H_ */ diff --git a/include/dt-bindings/reset/sun50i-a64-ccu.h b/include/dt-bindings/reset/sun50i-a64-ccu.h new file mode 100644 index 0000000..db60b29 --- /dev/null +++ b/include/dt-bindings/reset/sun50i-a64-ccu.h @@ -0,0 +1,98 @@ +/* + * Copyright (C) 2016 Maxime Ripard + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_RST_SUN50I_A64_H_ +#define _DT_BINDINGS_RST_SUN50I_A64_H_ + +#define RST_USB_PHY0 0 +#define RST_USB_PHY1 1 +#define RST_USB_HSIC 2 +#define RST_DRAM 3 +#define RST_MBUS 4 +#define RST_BUS_MIPI_DSI 5 +#define RST_BUS_CE 6 +#define RST_BUS_DMA 7 +#define RST_BUS_MMC0 8 +#define RST_BUS_MMC1 9 +#define RST_BUS_MMC2 10 +#define RST_BUS_NAND 11 +#define RST_BUS_DRAM 12 +#define RST_BUS_EMAC 13 +#define RST_BUS_TS 14 +#define RST_BUS_HSTIMER 15 +#define RST_BUS_SPI0 16 +#define RST_BUS_SPI1 17 +#define RST_BUS_OTG 18 +#define RST_BUS_EHCI0 19 +#define RST_BUS_EHCI1 20 +#define RST_BUS_OHCI0 21 +#define RST_BUS_OHCI1 22 +#define RST_BUS_VE 23 +#define RST_BUS_TCON0 24 +#define RST_BUS_TCON1 25 +#define RST_BUS_DEINTERLACE 26 +#define RST_BUS_CSI 27 +#define RST_BUS_HDMI0 28 +#define RST_BUS_HDMI1 29 +#define RST_BUS_DE 30 +#define RST_BUS_GPU 31 +#define RST_BUS_MSGBOX 32 +#define RST_BUS_SPINLOCK 33 +#define RST_BUS_DBG 34 +#define RST_BUS_LVDS 35 +#define RST_BUS_CODEC 36 +#define RST_BUS_SPDIF 37 +#define RST_BUS_THS 38 +#define RST_BUS_I2S0 39 +#define RST_BUS_I2S1 40 +#define RST_BUS_I2S2 41 +#define RST_BUS_I2C0 42 +#define RST_BUS_I2C1 43 +#define RST_BUS_I2C2 44 +#define RST_BUS_SCR 45 +#define RST_BUS_UART0 46 +#define RST_BUS_UART1 47 +#define RST_BUS_UART2 48 +#define RST_BUS_UART3 49 +#define RST_BUS_UART4 50 + +#endif /* _DT_BINDINGS_RST_SUN50I_A64_H_ */ -- cgit v0.10.2 From 2dbe9c1362c7481fac93524f65340a48c79eed9a Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Thu, 25 May 2017 20:16:00 +0000 Subject: sun50i: a64: Add initial Banana Pi M64 support BPI-M64 is a 64-bit quad-core mini single board computer using the Allwinner A64 SOC. BPI-M64 features - 1.2 Ghz Quad-Core ARM Cortex A53 - 2GB DDR3 SDRAM with 733MHz - MicroSD/eMMC(8GB) - 10/100/1000Mbps ethernet (Realtek RTL8211E/D) - Wifi + BT - IR receiver - Audio In/Out - Video In/Out - 5V 2A DC power-supply For dts file, Sync with Linux commit 4879b7ae("Merge tag 'dmaengine-4.12-rc1'"). Boot from MMC: ------------- U-Boot SPL 2017.05-00667-g85dd258-dirty (May 29 2017 - 13:07:31) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL3-1: Running on A64/H64 (1689) in SRAM A2 (@0x44000) NOTICE: Configuring SPC Controller NOTICE: BL3-1: v1.0(debug):aa75c8d NOTICE: BL3-1: Built : 18:28:27, May 24 2017 NOTICE: Configuring AXP PMIC NOTICE: PMIC: setup successful INFO: BL3-1: Initializing runtime services INFO: BL3-1: Preparing for EL3 exit to normal world INFO: BL3-1: Next image address: 0x4a000000, SPSR: 0x3c9 U-Boot 2017.05-00667-g85dd258-dirty (May 29 2017 - 13:07:31 +0000) Allwinner Technology CPU: Allwinner A64 (SUN50I) Model: BananaPi-M64 DRAM: 2 GiB MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. starting USB... No controllers found Hit any key to stop autoboot: 0 Signed-off-by: Jagan Teki Acked-by: Maxime Ripard diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index f2e5921..82671b3 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -317,6 +317,7 @@ dtb-$(CONFIG_MACH_SUN8I_V3S) += \ dtb-$(CONFIG_MACH_SUN50I_H5) += \ sun50i-h5-orangepi-pc2.dtb dtb-$(CONFIG_MACH_SUN50I) += \ + sun50i-a64-bananapi-m64.dtb \ sun50i-a64-pine64-plus.dtb \ sun50i-a64-pine64.dtb dtb-$(CONFIG_MACH_SUN9I) += \ diff --git a/arch/arm/dts/sun50i-a64-bananapi-m64.dts b/arch/arm/dts/sun50i-a64-bananapi-m64.dts new file mode 100644 index 0000000..02db114 --- /dev/null +++ b/arch/arm/dts/sun50i-a64-bananapi-m64.dts @@ -0,0 +1,121 @@ +/* + * Copyright (c) 2016 ARM Ltd. + * Copyright (C) 2017 Jagan Teki + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "sun50i-a64.dtsi" + +#include + +/ { + model = "BananaPi-M64"; + compatible = "sinovoip,bananapi-m64", "allwinner,sun50i-a64"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; +}; + +&i2c1_pins { + bias-pull-up; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_vcc3v3>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; + cd-inverted; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + status = "okay"; +}; diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index a4bbbd1..5b51420 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -114,6 +114,11 @@ S: Maintained F: configs/Bananapi_M2_Ultra_defconfig F: arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts +BANANAPI M64 +M: Jagan Teki +S: Maintained +F: configs/bananapi_m64_defconfig + COLOMBUS BOARD M: Maxime Ripard S: Maintained diff --git a/configs/bananapi_m64_defconfig b/configs/bananapi_m64_defconfig new file mode 100644 index 0000000..3908d42 --- /dev/null +++ b/configs/bananapi_m64_defconfig @@ -0,0 +1,17 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN50I=y +CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y +CONFIG_MMC0_CD_PIN="PH13" +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-bananapi-m64" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_ISO_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_SUN8I_EMAC=y +CONFIG_USB_EHCI_HCD=y -- cgit v0.10.2 From 702a3e579b115b7e443773e56910a6b13d7ea7bf Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Thu, 25 May 2017 18:15:36 +0000 Subject: arm64: dts: sun50i: Add sun50i-h5.dtsi The Allwinner H5 SoC is pin-compatible to the H3 SoC, but uses Cortex-A53 cores instead. So move the shared cpu based and peripherals nodes into sun50i-h5.dtsi so, that it can shared among the sun50i-h5 board dts files. Signed-off-by: Jagan Teki diff --git a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts index de60f78..81594e6 100644 --- a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts +++ b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts @@ -42,40 +42,12 @@ /dts-v1/; -#include "sun8i-h3.dtsi" +#include "sun50i-h5.dtsi" / { model = "OrangePi PC 2"; compatible = "xunlong,orangepi-pc-2", "allwinner,sun50i-h5"; - cpus { - cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; - enable-method = "psci"; - }; - cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; - enable-method = "psci"; - }; - cpu@2 { - compatible = "arm,cortex-a53", "arm,armv8"; - enable-method = "psci"; - }; - cpu@3 { - compatible = "arm,cortex-a53", "arm,armv8"; - enable-method = "psci"; - }; - }; - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - timer { - compatible = "arm,armv8-timer"; - }; - chosen { stdout-path = "serial0:115200n8"; }; @@ -99,10 +71,6 @@ }; }; -&gic { - compatible = "arm,gic-400"; -}; - &mmc0 { compatible = "allwinner,sun50i-h5-mmc", "allwinner,sun50i-a64-mmc", diff --git a/arch/arm/dts/sun50i-h5.dtsi b/arch/arm/dts/sun50i-h5.dtsi new file mode 100644 index 0000000..4904c18 --- /dev/null +++ b/arch/arm/dts/sun50i-h5.dtsi @@ -0,0 +1,77 @@ +/* + * Copyright (c) 2016 ARM Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sun8i-h3.dtsi" + +/ { + cpus { + cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + enable-method = "psci"; + }; + cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + enable-method = "psci"; + }; + cpu@2 { + compatible = "arm,cortex-a53", "arm,armv8"; + enable-method = "psci"; + }; + cpu@3 { + compatible = "arm,cortex-a53", "arm,armv8"; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + }; +}; + +&gic { + compatible = "arm,gic-400"; +}; -- cgit v0.10.2 From f333973340a4b84461074a1c38ede3ebbc3de297 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Thu, 25 May 2017 18:26:41 +0000 Subject: arm64: dts: sun50i: h5: orangepi-pc2: Use GPIO flag binding macro Instead of defining numerical value on GPIO flag better to use existing binding macro. Signed-off-by: Jagan Teki diff --git a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts index 81594e6..780d59a 100644 --- a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts +++ b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts @@ -44,6 +44,8 @@ #include "sun50i-h5.dtsi" +#include + / { model = "OrangePi PC 2"; compatible = "xunlong,orangepi-pc-2", "allwinner,sun50i-h5"; @@ -79,7 +81,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 5 6 0>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; cd-inverted; status = "okay"; }; -- cgit v0.10.2 From 868e37159e8e0b776600ebb65efcbc53f1318ba2 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Wed, 24 May 2017 19:18:08 +0000 Subject: sun50i: h5: Add initial Orangepi Prime support Orangepi Prime is an open-source single-board computer using the Allwinner h5 SOC. H5 Orangepi Prime has - Quad-core Cortex-A53 - 2GB DDR3 - Debug TTL UART - 1000M/100M Ethernet RJ45 - Three USB 2.0 - HDMI - Audio and MIC - Wifi + BT - IR receiver - HDMI - Wifi + BT Boot from MMC: ------------- U-Boot SPL 2017.05-00662-ga3f4c05-dirty (May 25 2017 - 13:30:14) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL3-1: Running on H5 (1718) in SRAM A2 (@0x44000) NOTICE: Configuring SPC Controller NOTICE: BL3-1: v1.0(debug):aa75c8d NOTICE: BL3-1: Built : 18:28:27, May 24 2017 INFO: BL3-1: Initializing runtime services INFO: BL3-1: Preparing for EL3 exit to normal world INFO: BL3-1: Next image address: 0x4a000000, SPSR: 0x3c9 U-Boot 2017.05-00662-ga3f4c05-dirty (May 25 2017 - 13:30:14 +0000) Allwinner Technology CPU: Allwinner H5 (SUN50I) Model: OrangePi Prime DRAM: 2 GiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: phy interface7 eth0: ethernet@1c30000 starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 scanning bus 0 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 Signed-off-by: Jagan Teki Acked-by: Maxime Ripard diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 82671b3..b8ebd6e 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -315,7 +315,8 @@ dtb-$(CONFIG_MACH_SUN8I_R40) += \ dtb-$(CONFIG_MACH_SUN8I_V3S) += \ sun8i-v3s-licheepi-zero.dtb dtb-$(CONFIG_MACH_SUN50I_H5) += \ - sun50i-h5-orangepi-pc2.dtb + sun50i-h5-orangepi-pc2.dtb \ + sun50i-h5-orangepi-prime.dtb dtb-$(CONFIG_MACH_SUN50I) += \ sun50i-a64-bananapi-m64.dtb \ sun50i-a64-pine64-plus.dtb \ diff --git a/arch/arm/dts/sun50i-h5-orangepi-prime.dts b/arch/arm/dts/sun50i-h5-orangepi-prime.dts new file mode 100644 index 0000000..67eade7 --- /dev/null +++ b/arch/arm/dts/sun50i-h5-orangepi-prime.dts @@ -0,0 +1,104 @@ +/* + * Copyright (C) 2017 Jagan Teki + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "sun50i-h5.dtsi" + +#include + +/ { + model = "OrangePi Prime"; + compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x40000000 0x80000000>; + }; + + soc { + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; +}; + +&mmc0 { + compatible = "allwinner,sun50i-h5-mmc", + "allwinner,sun50i-a64-mmc", + "allwinner,sun5i-a13-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; + cd-inverted; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 5b51420..0f1290a 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -272,6 +272,11 @@ M: Andre Przywara S: Maintained F: configs/orangepi_pc2_defconfig +ORANGEPI PRIME BOARD +M: Jagan Teki +S: Maintained +F: configs/orangepi_prime_defconfig + PINE64 BOARDS M: Andre Przywara S: Maintained diff --git a/configs/orangepi_prime_defconfig b/configs/orangepi_prime_defconfig new file mode 100644 index 0000000..dc8d59e --- /dev/null +++ b/configs/orangepi_prime_defconfig @@ -0,0 +1,16 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN50I_H5=y +CONFIG_DRAM_CLK=672 +CONFIG_DRAM_ZQ=3881977 +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-orangepi-prime" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_ISO_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_SUN8I_EMAC=y +CONFIG_USB_EHCI_HCD=y -- cgit v0.10.2