From bdbcdc897f9e854ca8a4701418dec048ef376431 Mon Sep 17 00:00:00 2001 From: Stefan Herbrechtsmeier Date: Mon, 17 Oct 2011 17:22:48 +0200 Subject: pxa: convert pxa27x_udc to use read and write functions Signed-off-by: Stefan Herbrechtsmeier CC: Marek Vasut CC: Remy Bohmer diff --git a/arch/arm/include/asm/arch-pxa/pxa-regs.h b/arch/arm/include/asm/arch-pxa/pxa-regs.h index 0c3cd6d..b81b42c 100644 --- a/arch/arm/include/asm/arch-pxa/pxa-regs.h +++ b/arch/arm/include/asm/arch-pxa/pxa-regs.h @@ -645,7 +645,7 @@ typedef void (*ExcpHndlr) (void) ; #define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge Interrupt Enable */ #define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge Interrupt Enable */ -#define UDCCSN(x) __REG2(0x40600100, (x) << 2) +#define UDCCSN(x) (0x40600100 + ((x) << 2)) #define UDCCSR0 0x40600100 /* UDC Control/Status register - Endpoint 0 */ #define UDCCSR0_SA (1 << 7) /* Setup Active */ @@ -693,7 +693,7 @@ typedef void (*ExcpHndlr) (void) ; #define UDCCSR_PC (1 << 1) /* Packet Complete */ #define UDCCSR_FS (1 << 0) /* FIFO needs service */ -#define UDCBCN(x) __REG2(0x40600200, (x)<<2) +#define UDCBCN(x) (0x40600200 + ((x) << 2)) #define UDCBCR0 0x40600200 /* Byte Count Register - EP0 */ #define UDCBCRA 0x40600204 /* Byte Count Register - EPA */ #define UDCBCRB 0x40600208 /* Byte Count Register - EPB */ @@ -719,7 +719,7 @@ typedef void (*ExcpHndlr) (void) ; #define UDCBCRW 0x40600258 /* Byte Count Register - EPW */ #define UDCBCRX 0x4060025C /* Byte Count Register - EPX */ -#define UDCDN(x) __REG2(0x40600300, (x)<<2) +#define UDCDN(x) (0x40600300 + ((x) << 2)) #define UDCDR0 0x40600300 /* Data Register - EP0 */ #define UDCDRA 0x40600304 /* Data Register - EPA */ #define UDCDRB 0x40600308 /* Data Register - EPB */ @@ -745,7 +745,7 @@ typedef void (*ExcpHndlr) (void) ; #define UDCDRW 0x40600358 /* Data Register - EPW */ #define UDCDRX 0x4060035C /* Data Register - EPX */ -#define UDCCN(x) __REG2(0x40600400, (x)<<2) +#define UDCCN(x) (0x40600400 + ((x) << 2)) #define UDCCRA 0x40600404 /* Configuration register EPA */ #define UDCCRB 0x40600408 /* Configuration register EPB */ #define UDCCRC 0x4060040C /* Configuration register EPC */ diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index e6ccd49..0d3a988 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -26,11 +26,13 @@ #include #include #include -#include -#include +#include #include +#include #include +#include "ep0.h" + /* number of endpoints on this UDC */ #define UDC_MAX_ENDPOINTS 24 @@ -50,7 +52,7 @@ static void udc_dump_buffer(char *name, u8 *buf, int len) static inline void udc_ack_int_UDCCR(int mask) { - USIR1 = mask | USIR1; + writel(readl(USIR1) | mask, USIR1); } /* @@ -68,9 +70,7 @@ static int udc_write_urb(struct usb_endpoint_instance *endpoint) { struct urb *urb = endpoint->tx_urb; int ep_num = endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK; - u32 *addr32 = (u32 *) &UDCDN(ep_num); u32 *data32 = (u32 *) urb->buffer; - u8 *addr8 = (u8 *) &UDCDN(ep_num); u8 *data8 = (u8 *) urb->buffer; unsigned int i, n, w, b, is_short; int timeout = 2000; /* 2ms */ @@ -98,26 +98,28 @@ static int udc_write_urb(struct usb_endpoint_instance *endpoint) /* Prepare for data send */ if (ep_num) - UDCCSN(ep_num) = UDCCSR_PC; + writel(UDCCSR_PC ,UDCCSN(ep_num)); for (i = 0; i < w; i++) - *addr32 = data32[endpoint->sent/4 + i]; + writel(data32[endpoint->sent / 4 + i], UDCDN(ep_num)); + for (i = 0; i < b; i++) - *addr8 = data8[endpoint->sent + w*4 + i]; + writeb(data8[endpoint->sent + w * 4 + i], UDCDN(ep_num)); /* Set "Packet Complete" if less data then tx_packetSize */ if (is_short) - UDCCSN(ep_num) = ep_num ? UDCCSR_SP : UDCCSR0_IPR; + writel(ep_num ? UDCCSR_SP : UDCCSR0_IPR, UDCCSN(ep_num)); /* Wait for data sent */ - while (!(UDCCSN(ep_num) & (ep_num ? UDCCSR_PC : UDCCSR0_IPR))) { - if (ep_num) { + if (ep_num) { + while (!(readl(UDCCSN(ep_num)) & UDCCSR_PC)) { if (timeout-- == 0) return -1; else udelay(1); - }; + } } + endpoint->last = n; if (ep_num) { @@ -127,7 +129,7 @@ static int udc_write_urb(struct usb_endpoint_instance *endpoint) endpoint->last -= n; } - if ((endpoint->tx_urb->actual_length - endpoint->sent) <= 0) { + if (endpoint->sent >= urb->actual_length) { urb->actual_length = 0; endpoint->sent = 0; endpoint->last = 0; @@ -148,7 +150,6 @@ static int udc_read_urb(struct usb_endpoint_instance *endpoint) { struct urb *urb = endpoint->rcv_urb; int ep_num = endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK; - u32 *addr32 = (u32 *) &UDCDN(ep_num); u32 *data32 = (u32 *) urb->buffer; unsigned int i, n, is_short ; @@ -160,15 +161,15 @@ static int udc_read_urb(struct usb_endpoint_instance *endpoint) endpoint->rcv_packetSize); #endif - if (UDCCSN(ep_num) & UDCCSR_BNE) - n = UDCBCN(ep_num) & 0x3ff; + if (readl(UDCCSN(ep_num)) & UDCCSR_BNE) + n = readl(UDCBCN(ep_num)) & 0x3ff; else /* zlp */ n = 0; is_short = n != endpoint->rcv_packetSize; usbdbg("n %d%s", n, is_short ? "-s" : ""); for (i = 0; i < n; i += 4) - data32[urb->actual_length/4 + i/4] = *addr32; + data32[urb->actual_length / 4 + i / 4] = readl(UDCDN(ep_num)); udc_dump_buffer("urb read", (u8 *) data32, urb->actual_length + n); usbd_rcv_complete(endpoint, n, 0); @@ -178,27 +179,35 @@ static int udc_read_urb(struct usb_endpoint_instance *endpoint) static int udc_read_urb_ep0(void) { - u32 *addr32 = (u32 *) &UDCDN(0); u32 *data32 = (u32 *) ep0_urb->buffer; - u8 *addr8 = (u8 *) &UDCDN(0); u8 *data8 = (u8 *) ep0_urb->buffer; unsigned int i, n, w, b; - n = UDCBCR0; + usbdbg("read urb on ep 0"); +#if defined(USBDDBG) && defined(USBDPARANOIA) + usbdbg("urb: buf %p, buf_len %d, actual_len %d", + ep0_urb->buffer, ep0_urb->buffer_length, ep0_urb->actual_length); +#endif + + n = readl(UDCBCR0); w = n / 4; b = n % 4; for (i = 0; i < w; i++) { - data32[ep0_urb->actual_length/4 + i] = *addr32; - ep0_urb->actual_length += 4; + data32[ep0_urb->actual_length / 4 + i] = readl(UDCDN(0)); +// ep0_urb->actual_length += 4; } for (i = 0; i < b; i++) { - data8[ep0_urb->actual_length + w*4 + i] = *addr8; - ep0_urb->actual_length++; + data8[ep0_urb->actual_length + w * 4 + i] = readb(UDCDN(0)); +// ep0_urb->actual_length++; } - UDCCSR0 = UDCCSR0_OPC | UDCCSR0_IPR; + ep0_urb->actual_length += n; + + udc_dump_buffer("urb read", (u8 *) data32, ep0_urb->actual_length); + + writel(UDCCSR0_OPC | UDCCSR0_IPR, UDCCSR0); if (ep0_urb->actual_length == ep0_urb->device_request.wLength) return 1; @@ -207,7 +216,7 @@ static int udc_read_urb_ep0(void) static void udc_handle_ep0(struct usb_endpoint_instance *endpoint) { - u32 udccsr0 = UDCCSR0; + u32 udccsr0 = readl(UDCCSR0); u32 *data = (u32 *) &ep0_urb->device_request; int i; @@ -216,7 +225,7 @@ static void udc_handle_ep0(struct usb_endpoint_instance *endpoint) /* Clear stall status */ if (udccsr0 & UDCCSR0_SST) { usberr("clear stall status"); - UDCCSR0 = UDCCSR0_SST; + writel(UDCCSR0_SST, UDCCSR0); ep0state = EP0_IDLE; } @@ -227,8 +236,7 @@ static void udc_handle_ep0(struct usb_endpoint_instance *endpoint) switch (ep0state) { case EP0_IDLE: - - udccsr0 = UDCCSR0; + udccsr0 = readl(UDCCSR0); /* Start control request? */ if ((udccsr0 & (UDCCSR0_OPC | UDCCSR0_SA | UDCCSR0_RNE)) == (UDCCSR0_OPC | UDCCSR0_SA | UDCCSR0_RNE)) { @@ -238,15 +246,15 @@ static void udc_handle_ep0(struct usb_endpoint_instance *endpoint) */ usbdbg("try reading SETUP packet"); for (i = 0; i < 2; i++) { - if ((UDCCSR0 & UDCCSR0_RNE) == 0) { + if ((readl(UDCCSR0) & UDCCSR0_RNE) == 0) { usberr("setup packet too short:%d", i); goto stall; } - data[i] = UDCDR0; + data[i] = readl(UDCDR0); } - UDCCSR0 |= (UDCCSR0_OPC | UDCCSR0_SA); - if ((UDCCSR0 & UDCCSR0_RNE) != 0) { + writel(readl(UDCCSR0) | UDCCSR0_OPC | UDCCSR0_SA, UDCCSR0); + if ((readl(UDCCSR0) & UDCCSR0_RNE) != 0) { usberr("setup packet too long"); goto stall; } @@ -261,7 +269,7 @@ static void udc_handle_ep0(struct usb_endpoint_instance *endpoint) (u8 *)data, 8); goto stall; } - UDCCSR0 = UDCCSR0_IPR; + writel(UDCCSR0_IPR, UDCCSR0); ep0state = EP0_IDLE; } else { /* Check direction */ @@ -274,7 +282,7 @@ static void udc_handle_ep0(struct usb_endpoint_instance *endpoint) ep0_urb->buffer_length = sizeof(ep0_urb->buffer_data); ep0_urb->actual_length = 0; - UDCCSR0 = UDCCSR0_IPR; + writel(UDCCSR0_IPR, UDCCSR0); } else { /* The ep0_recv_setup function has * already placed our response packet @@ -289,9 +297,9 @@ stall: , (u8 *) data, 8); ep0state = EP0_IDLE; - UDCCSR0 = UDCCSR0_SA | + writel(UDCCSR0_SA | UDCCSR0_OPC | UDCCSR0_FST | - UDCCS0_FTF; + UDCCS0_FTF, UDCCSR0); return; } @@ -317,7 +325,7 @@ stall: * - IPR cleared * - OPC got set, without SA (likely status stage) */ - UDCCSR0 = udccsr0 & (UDCCSR0_SA | UDCCSR0_OPC); + writel(udccsr0 & (UDCCSR0_SA | UDCCSR0_OPC), UDCCSR0); } break; @@ -351,7 +359,7 @@ read_complete: case EP0_IN_DATA: /* GET_DESCRIPTOR etc */ if (udccsr0 & UDCCSR0_OPC) { - UDCCSR0 = UDCCSR0_OPC | UDCCSR0_FTF; + writel(UDCCSR0_OPC | UDCCSR0_FTF, UDCCSR0); usberr("ep0in premature status"); ep0state = EP0_IDLE; } else { @@ -364,14 +372,14 @@ read_complete: break; case EP0_XFER_COMPLETE: - UDCCSR0 = UDCCSR0_IPR; + writel(UDCCSR0_IPR, UDCCSR0); ep0state = EP0_IDLE; break; default: usbdbg("Default\n"); } - USIR0 = USIR0_IR0; + writel(USIR0_IR0, USIR0); } static void udc_handle_ep(struct usb_endpoint_instance *endpoint) @@ -380,33 +388,33 @@ static void udc_handle_ep(struct usb_endpoint_instance *endpoint) int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; int ep_isout = (ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT; - u32 flags = UDCCSN(ep_num) & (UDCCSR_SST | UDCCSR_TRN); + u32 flags = readl(UDCCSN(ep_num)) & (UDCCSR_SST | UDCCSR_TRN); if (flags) - UDCCSN(ep_num) = flags; + writel(flags, UDCCSN(ep_num)); if (ep_isout) udc_read_urb(endpoint); else udc_write_urb(endpoint); - UDCCSN(ep_num) = UDCCSR_PC; + writel(UDCCSR_PC, UDCCSN(ep_num)); } static void udc_state_changed(void) { int config, interface, alternate; - UDCCR |= UDCCR_SMAC; + writel(readl(UDCCR) | UDCCR_SMAC, UDCCR); - config = (UDCCR & UDCCR_ACN) >> UDCCR_ACN_S; - interface = (UDCCR & UDCCR_AIN) >> UDCCR_AIN_S; - alternate = (UDCCR & UDCCR_AAISN) >> UDCCR_AAISN_S; + config = (readl(UDCCR) & UDCCR_ACN) >> UDCCR_ACN_S; + interface = (readl(UDCCR) & UDCCR_AIN) >> UDCCR_AIN_S; + alternate = (readl(UDCCR) & UDCCR_AAISN) >> UDCCR_AAISN_S; usbdbg("New UDC settings are: conf %d - inter %d - alter %d", config, interface, alternate); usbd_device_event_irq(udc_device, DEVICE_CONFIGURED, 0); - UDCISR1 = UDCISR1_IRCC; + writel(UDCISR1_IRCC, UDCISR1); } void udc_irq(void) @@ -419,7 +427,7 @@ void udc_irq(void) do { handled = 0; /* Suspend Interrupt Request */ - if (USIR1 & UDCCR_SUSIR) { + if (readl(USIR1) & UDCCR_SUSIR) { usbdbg("Suspend\n"); udc_ack_int_UDCCR(UDCCR_SUSIR); handled = 1; @@ -427,35 +435,35 @@ void udc_irq(void) } /* Resume Interrupt Request */ - if (USIR1 & UDCCR_RESIR) { + if (readl(USIR1) & UDCCR_RESIR) { udc_ack_int_UDCCR(UDCCR_RESIR); handled = 1; usbdbg("USB resume\n"); } - if (USIR1 & (1<<31)) { + if (readl(USIR1) & (1<<31)) { handled = 1; udc_state_changed(); } /* Reset Interrupt Request */ - if (USIR1 & UDCCR_RSTIR) { + if (readl(USIR1) & UDCCR_RSTIR) { udc_ack_int_UDCCR(UDCCR_RSTIR); handled = 1; usbdbg("Reset\n"); usbd_device_event_irq(udc_device, DEVICE_RESET, 0); } else { - if (USIR0) - usbdbg("UISR0: %x \n", USIR0); + if (readl(USIR0)) + usbdbg("UISR0: %x \n", readl(USIR0)); - if (USIR0 & 0x2) - USIR0 = 0x2; + if (readl(USIR0) & 0x2) + writel(0x2, USIR0); /* Control traffic */ - if (USIR0 & USIR0_IR0) { + if (readl(USIR0) & USIR0_IR0) { handled = 1; + writel(USIR0_IR0, USIR0); udc_handle_ep0(udc_device->bus->endpoint_array); - USIR0 = USIR0_IR0; } endpoint = udc_device->bus->endpoint_array; @@ -464,11 +472,11 @@ void udc_irq(void) USB_ENDPOINT_NUMBER_MASK; if (!ep_num) continue; - udcisr0 = UDCISR0; + udcisr0 = readl(UDCISR0); if (udcisr0 & UDCISR_INT(ep_num, UDC_INT_PACKETCMP)) { - UDCISR0 = UDCISR_INT(ep_num, - UDC_INT_PACKETCMP); + writel(UDCISR_INT(ep_num, UDC_INT_PACKETCMP), + UDCISR0); udc_handle_ep(&endpoint[i]); } } @@ -485,21 +493,21 @@ void udc_irq(void) static inline void udc_set_mask_UDCCR(int mask) { - UDCCR = (UDCCR & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS); + writel((readl(UDCCR) & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS), UDCCR); } static inline void udc_clear_mask_UDCCR(int mask) { - UDCCR = (UDCCR & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS); + writel((readl(UDCCR) & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS), UDCCR); } static void pio_irq_enable(int ep_num) { if (ep_num < 16) - UDCICR0 |= 3 << (ep_num * 2); + writel(readl(UDCICR0) | 3 << (ep_num * 2), UDCICR0); else { ep_num -= 16; - UDCICR1 |= 3 << (ep_num * 2); + writel(readl(UDCICR1) | 3 << (ep_num * 2), UDCICR1); } } @@ -589,22 +597,26 @@ void udc_setup_ep(struct usb_device_instance *device, unsigned int id, tmp |= (ep_size << UDCCONR_MPS_S) & UDCCONR_MPS; tmp |= UDCCONR_EE; - UDCCN(ep_num) = tmp; + writel(tmp, UDCCN(ep_num)); - usbdbg("UDCCR%c = %x", 'A' + ep_num-1, UDCCN(ep_num)); - usbdbg("UDCCSR%c = %x", 'A' + ep_num-1, UDCCSN(ep_num)); + //usbdbg + usbdbg("UDCCR%c = %x", 'A' + ep_num-1, readl(UDCCN(ep_num))); + usbdbg("UDCCSR%c = %x", 'A' + ep_num-1, readl(UDCCSN(ep_num))); } -#define CONFIG_USB_DEV_PULLUP_GPIO 87 - /* Connect the USB device to the bus */ void udc_connect(void) { usbdbg("UDC connect"); +#ifdef CONFIG_USB_DEV_PULLUP_GPIO /* Turn on the USB connection by enabling the pullup resistor */ set_GPIO_mode(CONFIG_USB_DEV_PULLUP_GPIO | GPIO_OUT); - GPSR(CONFIG_USB_DEV_PULLUP_GPIO) = GPIO_bit(CONFIG_USB_DEV_PULLUP_GPIO); + writel(GPIO_bit(CONFIG_USB_DEV_PULLUP_GPIO), GPSR(CONFIG_USB_DEV_PULLUP_GPIO)); +#else + /* Host port 2 transceiver D+ pull up enable */ + writel(readl(UP2OCR) | UP2OCR_DPPUE, UP2OCR); +#endif } /* Disconnect the USB device to the bus */ @@ -612,8 +624,13 @@ void udc_disconnect(void) { usbdbg("UDC disconnect"); +#ifdef CONFIG_USB_DEV_PULLUP_GPIO /* Turn off the USB connection by disabling the pullup resistor */ - GPCR(CONFIG_USB_DEV_PULLUP_GPIO) = GPIO_bit(CONFIG_USB_DEV_PULLUP_GPIO); + writel(GPIO_bit(CONFIG_USB_DEV_PULLUP_GPIO), GPCR(CONFIG_USB_DEV_PULLUP_GPIO)); +#else + /* Host port 2 transceiver D+ pull up disable */ + writel(readl(UP2OCR) & ~UP2OCR_DPPUE, UP2OCR); +#endif } /* Switch on the UDC */ @@ -621,15 +638,14 @@ void udc_enable(struct usb_device_instance *device) { ep0state = EP0_IDLE; - CKEN |= CKEN11_USB; /* enable endpoint 0, A, B's Packet Complete Interrupt. */ - UDCICR0 = 0x0000003f; - UDCICR1 = 0xa8000000; + writel(0xffffffff, UDCICR0); + writel(0xa8000000, UDCICR1); /* clear the interrupt status/control registers */ - UDCISR0 = 0xffffffff; - UDCISR1 = 0xffffffff; + writel(0xffffffff, UDCISR0); + writel(0xffffffff, UDCISR1); /* set UDC-enable */ udc_set_mask_UDCCR(UDCCR_UDE); @@ -652,7 +668,7 @@ void udc_disable(void) udc_clear_mask_UDCCR(UDCCR_UDE); /* Disable clock for USB device */ - CKEN &= ~CKEN11_USB; + writel(readl(CKEN) & ~CKEN11_USB, CKEN); /* Free ep0 URB */ if (ep0_urb) { @@ -689,14 +705,15 @@ int udc_init(void) udc_device = NULL; usbdbg("PXA27x usbd start"); + /* Enable clock for USB device */ + writel(readl(CKEN) | CKEN11_USB, CKEN); + /* Disable the UDC */ udc_clear_mask_UDCCR(UDCCR_UDE); - /* Disable clock for USB device */ - CKEN &= ~CKEN11_USB; - /* Disable IRQs: we don't use them */ - UDCICR0 = UDCICR1 = 0; + writel(0, UDCICR0); + writel(0, UDCICR1); return 0; } -- cgit v0.10.2