From 8966f33788c96df43c6cfcc9a7ba50f6343c1187 Mon Sep 17 00:00:00 2001 From: wdenk Date: Thu, 31 Oct 2002 23:30:59 +0000 Subject: Initial revision diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h new file mode 100644 index 0000000..015e621 --- /dev/null +++ b/include/configs/LANTEC.h @@ -0,0 +1,351 @@ +/* + * (C) Copyright 2000, 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * (C) Copyright 2001 + * Torsten Stevens, FHG IMS, stevens@ims.fhg.de + * Bruno Achauer, Exet AG, bruno@exet-ag.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + * [derived from config_TQM850L.h] + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC850 1 /* This is a MPC850 CPU */ +#define CONFIG_LANTEC 2 /* ...on a Lantec rev.2 board */ + +/* + * Port assignments (CONFIG_LANTEC == 1): + * - SMC1: J11 (MDB) ? + * - SMC2: J6 (Feature connector) + * - SCC2: J9 (RJ45) + * - SCC3: J8 (Sub-D9) + * + * Port assignments (CONFIG_LANTEC == 2): TBD + */ + + +#undef CONFIG_8xx_CONS_SMC2 /* Console is on SMC2 */ +#define CONFIG_8xx_CONS_SCC3 +#undef CONFIG_8xx_CONS_NONE +#define CONFIG_BAUDRATE 38400 /* console baudrate = 38.4kbps */ +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ + +#undef CONFIG_BOOTARGS +#define CONFIG_BOOTCOMMAND \ + "setenv bootargs root=/dev/ram panic=5;bootm 40040000 400A0000" + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +#define CONFIG_STATUS_LED 1 /* Status LED enabled */ + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) + +#define CONFIG_CMD_MINIMAL 0 +#define CONFIG_CMD_TINY (CFG_CMD_FLASH | \ + CFG_CMD_MEMORY | \ + CFG_CMD_LOADS | \ + CFG_CMD_LOADB) +#define CONFIG_CMD_NORMAL (CONFIG_CMD_DFL & ~CFG_CMD_BOOTD) +#define CONFIG_CMD_GDB (CONFIG_CMD_NORMAL | CFG_CMD_KGDB) +#define CONFIG_CMD_FULL (CFG_CMD_ALL & ~CFG_CMD_BEDBUG \ + & ~CFG_CMD_BSP \ + & ~CFG_CMD_DOC \ + & ~CFG_CMD_DTT \ + & ~CFG_CMD_EEPROM \ + & ~CFG_CMD_ELF \ + & ~CFG_CMD_FDC \ + & ~CFG_CMD_HWFLOW \ + & ~CFG_CMD_I2C \ + & ~CFG_CMD_IDE \ + & ~CFG_CMD_IRQ \ + & ~CFG_CMD_JFFS2 \ + & ~CFG_CMD_KGDB \ + & ~CFG_CMD_MII \ + & ~CFG_CMD_PCI \ + & ~CFG_CMD_PCMCIA \ + & ~CFG_CMD_SCSI \ + & ~CFG_CMD_USB \ + & ~CFG_CMD_VFD ) + +#if CONFIG_LANTEC >= 2 +#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ +#endif + +#if CONFIG_LANTEC >= 2 +# define CONFIG_COMMANDS CONFIG_CMD_FULL +#else +# define CONFIG_COMMANDS (CONFIG_CMD_FULL & ~CFG_CMD_DATE & ~CFG_CMD_NET) +#endif + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +/*----------------------------------------------------------------------- + * Internal Memory Mapped Register + */ +#define CFG_IMMR 0xFFF00000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0x40000000 +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ +#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * SYPCR - System Protection Control 11-9 + * SYPCR can only be written once after reset! + *----------------------------------------------------------------------- + * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze + */ +#if defined(CONFIG_WATCHDOG) +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ + SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) +#else +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) +#endif + +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration 11-6 + *----------------------------------------------------------------------- + * PCMCIA config., multi-function pin tri-state + */ +#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_DLK) + +/*----------------------------------------------------------------------- + * Clock Setting - Has the Lantec board a 32kHz clock ??? [XXX] + *----------------------------------------------------------------------- + */ +#define CONFIG_8xx_GCLK_FREQ 33000000 + +/*----------------------------------------------------------------------- + * TBSCR - Time Base Status and Control 11-26 + *----------------------------------------------------------------------- + * Clear Reference Interrupt Status, Timebase freezing enabled + */ +#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) + +/*----------------------------------------------------------------------- + * RTCSC - Real-Time Clock Status and Control Register 11-27 + *----------------------------------------------------------------------- + */ +#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) + +/*----------------------------------------------------------------------- + * PISCR - Periodic Interrupt Status and Control 11-31 + *----------------------------------------------------------------------- + * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled + */ +#define CFG_PISCR (PISCR_PS | PISCR_PITF) + +/*----------------------------------------------------------------------- + * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 + *----------------------------------------------------------------------- + * Reset PLL lock status sticky bit, timer expired status bit and timer + * interrupt status bit + * + * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)! + */ + /* up to 50 MHz we use a 1:1 clock */ +#define CFG_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) + +/*----------------------------------------------------------------------- + * SCCR - System Clock and reset Control Register 15-27 + *----------------------------------------------------------------------- + * Set clock output, timebase and RTC source and divider, + * power management and some other internal clocks + */ +#define SCCR_MASK SCCR_EBDF11 + /* up to 50 MHz we use a 1:1 clock */ +#define CFG_SCCR (SCCR_TBS | \ + SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ + SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ + SCCR_DFALCD00) + +/*----------------------------------------------------------------------- + * + *----------------------------------------------------------------------- + * + */ +/*#define CFG_DER 0x2002000F*/ +#define CFG_DER 0 + +/* + * Init Memory Controller: + * + * BR0/5 and OR0/5 (FLASH) + */ + +#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ +#define FLASH_BASE5_PRELIM 0x60000000 /* FLASH bank #1 */ + +/* used to re-map FLASH both when starting from SRAM or FLASH: + * restrict access enough to keep SRAM working (if any) + * but not too much to meddle with FLASH accesses + */ +#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */ +#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ + +/* FLASH timing */ +#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | \ + OR_SCY_5_CLK | OR_TRLX) + +#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH) +#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) +#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V ) + +#define CFG_OR5_REMAP CFG_OR0_REMAP +#define CFG_OR5_PRELIM CFG_OR0_PRELIM +#define CFG_BR5_PRELIM ((FLASH_BASE5_PRELIM & BR_BA_MSK) | BR_V ) + +/* + * BR2/3 and OR2/3 (SDRAM) + * + */ +#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank #0 */ +#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */ + +/* SDRAM timing: Multiplexed addresses */ +#define CFG_OR_TIMING_SDRAM (OR_CSNT_SAM) + +#define CFG_OR3_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM ) +#define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) + +/* + * Memory Periodic Timer Prescaler + */ + +/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */ +#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ +#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ + +/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ +#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ +#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ + +/* + * MAMR settings for SDRAM + */ +/* periodic timer for refresh */ +#define CFG_MAMR_PTA 97 /* start with divider for 100 MHz */ + +/* 8 column SDRAM */ +#define CFG_MAMR_8COL \ + ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ + MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ + MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#endif /* __CONFIG_H */ diff --git a/include/configs/hymod.h b/include/configs/hymod.h new file mode 100644 index 0000000..eeae055 --- /dev/null +++ b/include/configs/hymod.h @@ -0,0 +1,615 @@ +/* + * (C) Copyright 2000 + * Murray Jensen + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Config header file for Hymod board + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ +#define CONFIG_HYMOD 1 /* ...on a Hymod board */ + +#define CONFIG_BOARD_POSTCLK_INIT /* have board_postclk_init() function */ + +/* + * select serial console configuration + * + * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then + * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 + * for SCC). + * + * if CONFIG_CONS_NONE is defined, then the serial console routines must + * defined elsewhere (for example, on the cogent platform, there are serial + * ports on the motherboard which are used for the serial console - see + * cogent/cma101/serial.[ch]). + */ +#undef CONFIG_CONS_ON_SMC /* define if console on SMC */ +#define CONFIG_CONS_ON_SCC /* define if console on SCC */ +#undef CONFIG_CONS_NONE /* define if console on something else*/ +#define CONFIG_CONS_INDEX 1 /* which serial channel for console */ +#define CONFIG_CONS_USE_EXTC /* SMC/SCC use ext clock not brg_clk */ +#define CONFIG_CONS_EXTC_RATE 3686400 /* SMC/SCC ext clk rate in Hz */ +#define CONFIG_CONS_EXTC_PINSEL 0 /* pin select 0=CLK3/CLK9,1=CLK5/CLK15*/ + +/* + * select ethernet configuration + * + * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then + * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3 + * for FCC) + * + * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be + * defined elsewhere (as for the console), or CFG_CMD_NET must be removed + * from CONFIG_COMMANDS to remove support for networking. + */ +#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ +#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ +#undef CONFIG_ETHER_NONE /* define if ether on something else */ +#define CONFIG_ETHER_INDEX 1 /* which channel for ether */ + +#if (CONFIG_ETHER_INDEX == 1) + +/* + * - Rx-CLK is CLK10 + * - Tx-CLK is CLK11 + * - RAM for BD/Buffers is on the 60x Bus (see 28-13) + * - Enable Full Duplex in FSMR + */ +# define CFG_CMXFCR_MASK (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK) +# define CFG_CMXFCR_VALUE (CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK11) +# define CFG_CPMFCR_RAMTYPE 0 +# define CFG_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB) + +#elif (CONFIG_ETHER_INDEX == 2) + +/* + * - Rx-CLK is CLK13 + * - Tx-CLK is CLK14 + * - RAM for BD/Buffers is on the 60x Bus (see 28-13) + * - Enable Full Duplex in FSMR + */ +# define CFG_CMXFCR_MASK (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK) +# define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14) +# define CFG_CPMFCR_RAMTYPE 0 +# define CFG_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB) + +#elif (CONFIG_ETHER_INDEX == 3) + +/* + * - Rx-CLK is CLK15 + * - Tx-CLK is CLK16 + * - RAM for BD/Buffers is on the 60x Bus (see 28-13) + * - Enable Full Duplex in FSMR + */ +# define CFG_CMXFCR_MASK (CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK) +# define CFG_CMXFCR_VALUE (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16) +# define CFG_CPMFCR_RAMTYPE 0 +# define CFG_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB) + +#endif /* CONFIG_ETHER_INDEX */ + + +/* other options */ +#define CONFIG_HARD_I2C 1 /* To enable I2C hardware support */ + +/* system clock rate (CLKIN) - equal to the 60x and local bus speed */ +#ifdef DEBUG +#define CONFIG_8260_CLKIN 33333333 /* in Hz */ +#else +#define CONFIG_8260_CLKIN 66666666 /* in Hz */ +#endif + +#if defined(CONFIG_CONS_USE_EXTC) +#define CONFIG_BAUDRATE 115200 +#else +#define CONFIG_BAUDRATE 38400 +#endif + +/* default ip addresses - these will be overridden */ +#define CONFIG_IPADDR 192.168.1.1 /* hymod "boot" address */ +#define CONFIG_SERVERIP 192.168.1.254 /* hymod "server" address */ + +#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \ + CFG_CMD_BEDBUG | \ + CFG_CMD_DOC | \ + CFG_CMD_ELF | \ + CFG_CMD_FDC | \ + CFG_CMD_HWFLOW | \ + CFG_CMD_IDE | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_MII | \ + CFG_CMD_PCMCIA | \ + CFG_CMD_PCI | \ + CFG_CMD_USB | \ + CFG_CMD_SCSI | \ + CFG_CMD_VFD | \ + CFG_CMD_DTT ) ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +#ifdef DEBUG +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ +#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ +#undef CONFIG_KGDB_NONE /* define if kgdb on something else */ +#define CONFIG_KGDB_INDEX 2 /* which serial channel for kgdb */ +#define CONFIG_KGDB_USE_EXTC /* SMC/SCC use ext clock not brg_clk */ +#define CONFIG_KGDB_EXTC_RATE 3686400 /* serial ext clk rate in Hz */ +#define CONFIG_KGDB_EXTC_PINSEL 0 /* pin select 0=CLK3/CLK9,1=CLK5/CLK15*/ +# if defined(CONFIG_KGDB_USE_EXTC) +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */ +# else +#define CONFIG_KGDB_BAUDRATE 38400 /* speed to run kgdb serial port at */ +# endif +#endif + +#undef CONFIG_WATCHDOG /* disable platform specific watchdog */ + +#define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */ + +/* + * Hymod specific configurable options + */ +#undef CFG_HYMOD_DBLEDS /* walk mezz board LEDs */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x03c00000 /* 4 ... 60 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +#define CFG_I2C_SPEED 50000 +#define CFG_I2C_SLAVE 0x7e + +/* these are for the ST M24C02 2kbit serial i2c eeprom */ +#define CFG_I2C_EEPROM_ADDR 0x50 /* base address */ +#define CFG_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */ +#define CFG_I2C_RTC_ADDR 0x51 /* philips PCF8563 RTC address */ + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +/*----------------------------------------------------------------------- + * Hard Reset Configuration Words + * + * if you change bits in the HRCW, you must also change the CFG_* + * defines for the various registers affected by the HRCW e.g. changing + * HRCW_DPPCxx requires you to also change CFG_SIUMCR. + */ +#ifdef DEBUG +#define CFG_HRCW_MASTER (HRCW_BPS11|HRCW_CIP|HRCW_L2CPC01|HRCW_DPPC10|\ + HRCW_ISB100|HRCW_BMS|HRCW_MMR11|HRCW_APPC10|\ + HRCW_MODCK_H0010) +#else +#define CFG_HRCW_MASTER (HRCW_BPS11|HRCW_CIP|HRCW_L2CPC01|HRCW_DPPC10|\ + HRCW_ISB100|HRCW_BMS|HRCW_MMR11|HRCW_APPC10|\ + HRCW_MODCK_H0101) +#endif +/* no slaves so just duplicate the master hrcw */ +#define CFG_HRCW_SLAVE1 CFG_HRCW_MASTER +#define CFG_HRCW_SLAVE2 CFG_HRCW_MASTER +#define CFG_HRCW_SLAVE3 CFG_HRCW_MASTER +#define CFG_HRCW_SLAVE4 CFG_HRCW_MASTER +#define CFG_HRCW_SLAVE5 CFG_HRCW_MASTER +#define CFG_HRCW_SLAVE6 CFG_HRCW_MASTER +#define CFG_HRCW_SLAVE7 CFG_HRCW_MASTER + +/*----------------------------------------------------------------------- + * Internal Memory Mapped Register + */ +#define CFG_IMMR 0xF0000000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE TEXT_BASE +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_FPGA_BASE 0x80000000 +/* + * unfortunately, CFG_MONITOR_LEN must include the + * (very large i.e. 256kB) environment flash sector + */ +#define CFG_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor*/ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 2 /* max num of memory banks */ +#define CFG_MAX_FLASH_SECT 67 /* max num of sects on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Flash Erase Timeout (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ + +#define CFG_FLASH_TYPE FLASH_28F640J3A +#define CFG_FLASH_ID (INTEL_ID_28F640J3A & 0xff) +#define CFG_FLASH_NBLOCKS 64 + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE 0x40000 /* see README - env sect real size */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE+CFG_MONITOR_LEN-CFG_ENV_SECT_SIZE) + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value*/ +#endif + +/*----------------------------------------------------------------------- + * HIDx - Hardware Implementation-dependent Registers 2-11 + *----------------------------------------------------------------------- + * HID0 also contains cache control - initially enable both caches and + * invalidate contents, then the final state leaves only the instruction + * cache enabled. Note that Power-On and Hard reset invalidate the caches, + * but Soft reset does not. + * + * HID1 has only read-only information - nothing to set. + */ +#define CFG_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\ + HID0_IFEM|HID0_ABE) +#ifdef DEBUG +#define CFG_HID0_FINAL 0 +#else +#define CFG_HID0_FINAL (HID0_ICE|HID0_IFEM|HID0_ABE) +#endif +#define CFG_HID2 0 + +/*----------------------------------------------------------------------- + * RMR - Reset Mode Register 5-5 + *----------------------------------------------------------------------- + * turn on Checkstop Reset Enable + */ +#ifdef DEBUG +#define CFG_RMR 0 +#else +#define CFG_RMR RMR_CSRE +#endif + +/*----------------------------------------------------------------------- + * BCR - Bus Configuration 4-25 + *----------------------------------------------------------------------- + */ +#define CFG_BCR (BCR_ETM) + +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration 4-31 + *----------------------------------------------------------------------- + */ +#define CFG_SIUMCR (SIUMCR_DPPC10|SIUMCR_L2CPC01|\ + SIUMCR_APPC10|SIUMCR_MMR11) + +/*----------------------------------------------------------------------- + * SYPCR - System Protection Control 4-35 + * SYPCR can only be written once after reset! + *----------------------------------------------------------------------- + * Watchdog & Bus Monitor Timer max, 60x & Local Bus Monitor enable + */ +#if defined(CONFIG_WATCHDOG) +#define CFG_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ + SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE) +#else +#define CFG_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ + SYPCR_SWRI|SYPCR_SWP) +#endif /* CONFIG_WATCHDOG */ + +/*----------------------------------------------------------------------- + * TMCNTSC - Time Counter Status and Control 4-40 + *----------------------------------------------------------------------- + * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk, + * and enable Time Counter + */ +#define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) + +/*----------------------------------------------------------------------- + * PISCR - Periodic Interrupt Status and Control 4-42 + *----------------------------------------------------------------------- + * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable + * Periodic timer + */ +#define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) + +/*----------------------------------------------------------------------- + * SCCR - System Clock Control 9-8 + *----------------------------------------------------------------------- + * Ensure DFBRG is Divide by 16 + */ +#define CFG_SCCR (SCCR_DFBRG01) + +/*----------------------------------------------------------------------- + * RCCR - RISC Controller Configuration 13-7 + *----------------------------------------------------------------------- + */ +#define CFG_RCCR 0 + +/* + * Init Memory Controller: + * + * Bank Bus Machine PortSz Device + * ---- --- ------- ------ ------ + * 0 60x GPCM 32 bit FLASH + * 1 60x GPCM 32 bit FLASH (same as 0 - unused for now) + * 2 60x SDRAM 64 bit SDRAM + * 3 Local UPMC 8 bit Main Xilinx configuration + * 4 Local GPCM 32 bit Main Xilinx register mode + * 5 Local UPMB 32 bit Main Xilinx port mode + * 6 Local UPMC 8 bit Mezz Xilinx configuration + */ + +/* + * Bank 0 - FLASH + * + * Quotes from the HYMOD IO Board Reference manual: + * + * "The flash memory is two Intel StrataFlash chips, each configured for + * 16 bit operation and connected to give a 32 bit wide port." + * + * "The chip select logic is configured to respond to both *CS0 and *CS1. + * Therefore the FLASH memory will be mapped to both bank 0 and bank 1. + * It is suggested that bank 0 be read-only and bank 1 be read/write. The + * FLASH will then appear as ROM during boot." + * + * Initially, we are only going to use bank 0 in read/write mode. + */ + +/* 32 bit, read-write, GPCM on 60x bus */ +#define CFG_BR0_PRELIM ((CFG_FLASH_BASE&BRx_BA_MSK)|\ + BRx_PS_32|BRx_MS_GPCM_P|BRx_V) +/* up to 32 Mb */ +#define CFG_OR0_PRELIM (MEG_TO_AM(32)|ORxG_CSNT|ORxG_ACS_DIV2|ORxG_SCY_10_CLK) + +/* + * Bank 2 - SDRAM + * + * Quotes from the HYMOD IO Board Reference manual: + * + * "The main memory is implemented using TC59SM716FTL-10 SDRAM and has a + * fixed size of 64 Mbytes. The Toshiba TC59SM716FTL-10 is a CMOS synchronous + * dynamic random access memory organised as 4 banks by 4096 rows by 512 + * columns by 16 bits. Four chips provide a 64-bit port on the 60x bus." + * + * "The locations in SDRAM are accessed using multiplexed address pins to + * specify row and column. The pins also act to specify commands. The state + * of the inputs *RAS, *CAS and *WE defines the required action. The a10/AP + * pin may function as a row address or as the AUTO PRECHARGE control line, + * depending on the cycle type. The 60x bus SDRAM machine allows the MPC8260 + * address lines to be configured to the required multiplexing scheme." + */ + +#define CFG_SDRAM_SIZE 64 + +/* 64 bit, read-write, SDRAM on 60x bus */ +#define CFG_BR2_PRELIM ((CFG_SDRAM_BASE&BRx_BA_MSK)|\ + BRx_PS_64|BRx_MS_SDRAM_P|BRx_V) +/* 64 Mb, 4 int banks per dev, row start addr bit = A6, 12 row addr lines */ +#define CFG_OR2_PRELIM (MEG_TO_AM(CFG_SDRAM_SIZE)|\ + ORxS_BPD_4|ORxS_ROWST_PBI1_A6|ORxS_NUMR_12) + +/* + * The 60x Bus SDRAM Mode Register (PDSMR) is set as follows: + * + * Page Based Interleaving, Refresh Enable, Address Multiplexing where A5 + * is output on A16 pin (A6 on A17, and so on), use address pins A14-A16 + * as bank select, A7 is output on SDA10 during an ACTIVATE command, + * earliest timing for ACTIVATE command after REFRESH command is 6 clocks, + * earliest timing for ACTIVATE or REFRESH command after PRECHARGE command + * is 2 clocks, earliest timing for READ/WRITE command after ACTIVATE + * command is 2 clocks, earliest timing for PRECHARGE after last data + * was read is 1 clock, earliest timing for PRECHARGE after last data + * was written is 1 clock, CAS Latency is 2. + */ + +#define CFG_PSDMR (PSDMR_PBI|PSDMR_SDAM_A16_IS_A5|\ + PSDMR_BSMA_A14_A16|PSDMR_SDA10_PBI1_A7|\ + PSDMR_RFRC_6_CLK|PSDMR_PRETOACT_2W|\ + PSDMR_ACTTORW_2W|PSDMR_LDOTOPRE_1C|\ + PSDMR_WRC_1C|PSDMR_CL_2) + +/* + * The 60x bus-assigned SDRAM Refresh Timer (PSRT) (10-31) and the Refresh + * Timers Prescale (PTP) value in the Memory Refresh Timer Prescaler Register + * (MPTPR) (10-32) must also be set up (it used to be called the Periodic Timer + * Prescaler, hence the P instead of the R). The refresh timer period is given + * by (note that there was a change in the 8260 UM Errata): + * + * TimerPeriod = (PSRT + 1) / Fmptc + * + * where Fmptc is the BusClock divided by PTP. i.e. + * + * TimerPeriod = (PSRT + 1) / (BusClock / PTP) + * + * or + * + * TImerPeriod = (PTP * (PSRT + 1)) / BusClock + * + * The requirement for the Toshiba TC59SM716FTL-10 is that there must be + * 4K refresh cycles every 64 ms. i.e. one refresh cycle every 64000/4096 + * = 15.625 usecs. + * + * So PTP * (PSRT + 1) <= 15.625 * BusClock. At 66.666MHz, PSRT=31 and PTP=32 + * appear to be reasonable. + */ + +#ifdef DEBUG +#define CFG_PSRT 39 +#define CFG_MPTPR MPTPR_PTP_DIV8 +#else +#define CFG_PSRT 31 +#define CFG_MPTPR MPTPR_PTP_DIV32 +#endif + +/* + * Banks 3,4,5 and 6 - FPGA access + * + * Quotes from the HYMOD IO Board Reference manual: + * + * "The IO Board is fitted with a Xilinx XCV300E main FPGA. Provision is made + * for configuring an optional FPGA on the mezzanine interface. + * + * Access to the FPGAs may be divided into several catagories: + * + * 1. Configuration + * 2. Register mode access + * 3. Port mode access + * + * The main FPGA is supported for modes 1, 2 and 3. The mezzanine FPGA can be + * configured only (mode 1). Consequently there are four access types. + * + * To improve interface performance and simplify software design, the four + * possible access types are separately mapped to different memory banks. + * + * All are accessed using the local bus." + * + * Device Mode Memory Bank Machine Port Size Access + * + * Main Configuration 3 UPMC 8bit R/W + * Main Register 4 GPCM 32bit R/W + * Main Port 5 UPMB 32bit R/W + * Mezzanine Configuration 6 UPMC 8bit W/O + * + * "Note that mezzanine mode 1 access is write-only." + */ + +/* all the bank sizes must be a power of two, greater or equal to 32768 */ +#define FPGA_MAIN_CFG_BASE (CFG_FPGA_BASE) +#define FPGA_MAIN_CFG_SIZE 32768 +#define FPGA_MAIN_REG_BASE (FPGA_MAIN_CFG_BASE + FPGA_MAIN_CFG_SIZE) +#define FPGA_MAIN_REG_SIZE 32768 +#define FPGA_MAIN_PORT_BASE (FPGA_MAIN_REG_BASE + FPGA_MAIN_REG_SIZE) +#define FPGA_MAIN_PORT_SIZE 32768 +#define FPGA_MEZZ_CFG_BASE (FPGA_MAIN_PORT_BASE + FPGA_MAIN_PORT_SIZE) +#define FPGA_MEZZ_CFG_SIZE 32768 + +/* 8 bit, read-write, UPMC */ +#define CFG_BR3_PRELIM (FPGA_MAIN_CFG_BASE|BRx_PS_8|BRx_MS_UPMC|BRx_V) +/* up to 32Kbyte, burst inhibit */ +#define CFG_OR3_PRELIM (P2SZ_TO_AM(FPGA_MAIN_CFG_SIZE)|ORxU_BI) + +/* 32 bit, read-write, GPCM */ +#define CFG_BR4_PRELIM (FPGA_MAIN_REG_BASE|BRx_PS_32|BRx_MS_GPCM_L|BRx_V) +/* up to 32Kbyte */ +#define CFG_OR4_PRELIM (P2SZ_TO_AM(FPGA_MAIN_REG_SIZE)) + +/* 32 bit, read-write, UPMB */ +#define CFG_BR5_PRELIM (FPGA_MAIN_PORT_BASE|BRx_PS_32|BRx_MS_UPMB|BRx_V) +/* up to 32Kbyte */ +#define CFG_OR5_PRELIM (P2SZ_TO_AM(FPGA_MAIN_PORT_SIZE)|ORxU_BI) + +/* 8 bit, write-only, UPMC */ +#define CFG_BR6_PRELIM (FPGA_MEZZ_CFG_BASE|BRx_PS_8|BRx_MS_UPMC|BRx_V) +/* up to 32Kbyte, burst inhibit */ +#define CFG_OR6_PRELIM (P2SZ_TO_AM(FPGA_MEZZ_CFG_SIZE)|ORxU_BI) + +/*----------------------------------------------------------------------- + * MBMR - Machine B Mode 10-27 + *----------------------------------------------------------------------- + */ +#define CFG_MBMR (MxMR_BSEL|MxMR_OP_NORM) /* XXX - needs more */ + +/*----------------------------------------------------------------------- + * MCMR - Machine C Mode 10-27 + *----------------------------------------------------------------------- + */ +#define CFG_MCMR (MxMR_BSEL|MxMR_DSx_2_CYCL) /* XXX - needs more */ + +/* + * FPGA I/O Port/Bit information + */ + +#define FPGA_MAIN_PROG_PORT IOPIN_PORTA +#define FPGA_MAIN_PROG_PIN 4 /* PA4 */ +#define FPGA_MAIN_INIT_PORT IOPIN_PORTA +#define FPGA_MAIN_INIT_PIN 5 /* PA5 */ +#define FPGA_MAIN_DONE_PORT IOPIN_PORTA +#define FPGA_MAIN_DONE_PIN 6 /* PA6 */ + +#define FPGA_MEZZ_PROG_PORT IOPIN_PORTA +#define FPGA_MEZZ_PROG_PIN 0 /* PA0 */ +#define FPGA_MEZZ_INIT_PORT IOPIN_PORTA +#define FPGA_MEZZ_INIT_PIN 1 /* PA1 */ +#define FPGA_MEZZ_DONE_PORT IOPIN_PORTA +#define FPGA_MEZZ_DONE_PIN 2 /* PA2 */ +#define FPGA_MEZZ_ENABLE_PORT IOPIN_PORTA +#define FPGA_MEZZ_ENABLE_PIN 3 /* PA3 */ + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH*/ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#endif /* __CONFIG_H */ -- cgit v0.10.2