From edffa63d3d6e76991998789f9fcbaa483731ca65 Mon Sep 17 00:00:00 2001 From: Tom Warren Date: Tue, 22 May 2012 07:33:47 +0000 Subject: spi: tegra2: rename tegra2_spi.* to tegra_spi.* In anticipation of Tegra3 support, start removing/renaming Tegra2-specific files. No functional changes (yet). Also updated copyright to 2012. Signed-off-by: Tom Warren diff --git a/arch/arm/include/asm/arch-tegra2/tegra2_spi.h b/arch/arm/include/asm/arch-tegra2/tegra2_spi.h deleted file mode 100644 index ceec428..0000000 --- a/arch/arm/include/asm/arch-tegra2/tegra2_spi.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - * NVIDIA Tegra2 SPI-FLASH controller - * - * Copyright 2010-2011 NVIDIA Corporation - * - * This software may be used and distributed according to the - * terms of the GNU Public License, Version 2, incorporated - * herein by reference. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * Version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _TEGRA2_SPI_H_ -#define _TEGRA2_SPI_H_ - -#include - -struct spi_tegra { - u32 command; /* SPI_COMMAND_0 register */ - u32 status; /* SPI_STATUS_0 register */ - u32 rx_cmp; /* SPI_RX_CMP_0 register */ - u32 dma_ctl; /* SPI_DMA_CTL_0 register */ - u32 tx_fifo; /* SPI_TX_FIFO_0 register */ - u32 rsvd[3]; /* offsets 0x14 to 0x1F reserved */ - u32 rx_fifo; /* SPI_RX_FIFO_0 register */ -}; - -#define SPI_CMD_GO (1 << 30) -#define SPI_CMD_ACTIVE_SCLK_SHIFT 26 -#define SPI_CMD_ACTIVE_SCLK_MASK (3 << SPI_CMD_ACTIVE_SCLK_SHIFT) -#define SPI_CMD_CK_SDA (1 << 21) -#define SPI_CMD_ACTIVE_SDA_SHIFT 18 -#define SPI_CMD_ACTIVE_SDA_MASK (3 << SPI_CMD_ACTIVE_SDA_SHIFT) -#define SPI_CMD_CS_POL (1 << 16) -#define SPI_CMD_TXEN (1 << 15) -#define SPI_CMD_RXEN (1 << 14) -#define SPI_CMD_CS_VAL (1 << 13) -#define SPI_CMD_CS_SOFT (1 << 12) -#define SPI_CMD_CS_DELAY (1 << 9) -#define SPI_CMD_CS3_EN (1 << 8) -#define SPI_CMD_CS2_EN (1 << 7) -#define SPI_CMD_CS1_EN (1 << 6) -#define SPI_CMD_CS0_EN (1 << 5) -#define SPI_CMD_BIT_LENGTH (1 << 4) -#define SPI_CMD_BIT_LENGTH_MASK 0x0000001F - -#define SPI_STAT_BSY (1 << 31) -#define SPI_STAT_RDY (1 << 30) -#define SPI_STAT_RXF_FLUSH (1 << 29) -#define SPI_STAT_TXF_FLUSH (1 << 28) -#define SPI_STAT_RXF_UNR (1 << 27) -#define SPI_STAT_TXF_OVF (1 << 26) -#define SPI_STAT_RXF_EMPTY (1 << 25) -#define SPI_STAT_RXF_FULL (1 << 24) -#define SPI_STAT_TXF_EMPTY (1 << 23) -#define SPI_STAT_TXF_FULL (1 << 22) -#define SPI_STAT_SEL_TXRX_N (1 << 16) -#define SPI_STAT_CUR_BLKCNT (1 << 15) - -#define SPI_TIMEOUT 1000 -#define TEGRA2_SPI_MAX_FREQ 52000000 - - -#endif /* _TEGRA2_SPI_H_ */ diff --git a/arch/arm/include/asm/arch-tegra2/tegra_spi.h b/arch/arm/include/asm/arch-tegra2/tegra_spi.h new file mode 100644 index 0000000..892d90c --- /dev/null +++ b/arch/arm/include/asm/arch-tegra2/tegra_spi.h @@ -0,0 +1,75 @@ +/* + * NVIDIA Tegra2 SPI-FLASH controller + * + * Copyright 2010-2012 NVIDIA Corporation + * + * This software may be used and distributed according to the + * terms of the GNU Public License, Version 2, incorporated + * herein by reference. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _TEGRA_SPI_H_ +#define _TEGRA_SPI_H_ + +#include + +struct spi_tegra { + u32 command; /* SPI_COMMAND_0 register */ + u32 status; /* SPI_STATUS_0 register */ + u32 rx_cmp; /* SPI_RX_CMP_0 register */ + u32 dma_ctl; /* SPI_DMA_CTL_0 register */ + u32 tx_fifo; /* SPI_TX_FIFO_0 register */ + u32 rsvd[3]; /* offsets 0x14 to 0x1F reserved */ + u32 rx_fifo; /* SPI_RX_FIFO_0 register */ +}; + +#define SPI_CMD_GO (1 << 30) +#define SPI_CMD_ACTIVE_SCLK_SHIFT 26 +#define SPI_CMD_ACTIVE_SCLK_MASK (3 << SPI_CMD_ACTIVE_SCLK_SHIFT) +#define SPI_CMD_CK_SDA (1 << 21) +#define SPI_CMD_ACTIVE_SDA_SHIFT 18 +#define SPI_CMD_ACTIVE_SDA_MASK (3 << SPI_CMD_ACTIVE_SDA_SHIFT) +#define SPI_CMD_CS_POL (1 << 16) +#define SPI_CMD_TXEN (1 << 15) +#define SPI_CMD_RXEN (1 << 14) +#define SPI_CMD_CS_VAL (1 << 13) +#define SPI_CMD_CS_SOFT (1 << 12) +#define SPI_CMD_CS_DELAY (1 << 9) +#define SPI_CMD_CS3_EN (1 << 8) +#define SPI_CMD_CS2_EN (1 << 7) +#define SPI_CMD_CS1_EN (1 << 6) +#define SPI_CMD_CS0_EN (1 << 5) +#define SPI_CMD_BIT_LENGTH (1 << 4) +#define SPI_CMD_BIT_LENGTH_MASK 0x0000001F + +#define SPI_STAT_BSY (1 << 31) +#define SPI_STAT_RDY (1 << 30) +#define SPI_STAT_RXF_FLUSH (1 << 29) +#define SPI_STAT_TXF_FLUSH (1 << 28) +#define SPI_STAT_RXF_UNR (1 << 27) +#define SPI_STAT_TXF_OVF (1 << 26) +#define SPI_STAT_RXF_EMPTY (1 << 25) +#define SPI_STAT_RXF_FULL (1 << 24) +#define SPI_STAT_TXF_EMPTY (1 << 23) +#define SPI_STAT_TXF_FULL (1 << 22) +#define SPI_STAT_SEL_TXRX_N (1 << 16) +#define SPI_STAT_CUR_BLKCNT (1 << 15) + +#define SPI_TIMEOUT 1000 +#define TEGRA2_SPI_MAX_FREQ 52000000 + +#endif /* _TEGRA_SPI_H_ */ diff --git a/board/nvidia/common/uart-spi-switch.c b/board/nvidia/common/uart-spi-switch.c index 1ba1afd..307937a 100644 --- a/board/nvidia/common/uart-spi-switch.c +++ b/board/nvidia/common/uart-spi-switch.c @@ -25,7 +25,7 @@ #include #include #include -#include +#include /* position of the UART/SPI select switch */ diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index c967d87..c20f1f2 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -43,7 +43,7 @@ COBJS-$(CONFIG_OMAP3_SPI) += omap3_spi.o COBJS-$(CONFIG_SOFT_SPI) += soft_spi.o COBJS-$(CONFIG_SH_SPI) += sh_spi.o COBJS-$(CONFIG_FSL_ESPI) += fsl_espi.o -COBJS-$(CONFIG_TEGRA2_SPI) += tegra2_spi.o +COBJS-$(CONFIG_TEGRA_SPI) += tegra_spi.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/spi/tegra2_spi.c b/drivers/spi/tegra2_spi.c deleted file mode 100644 index fe7b405..0000000 --- a/drivers/spi/tegra2_spi.c +++ /dev/null @@ -1,290 +0,0 @@ -/* - * Copyright (c) 2010-2011 NVIDIA Corporation - * With help from the mpc8xxx SPI driver - * With more help from omap3_spi SPI driver - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#if defined(CONFIG_SPI_CORRUPTS_UART) - #define corrupt_delay() udelay(CONFIG_SPI_CORRUPTS_UART_DLY); -#else - #define corrupt_delay() -#endif - -struct tegra_spi_slave { - struct spi_slave slave; - struct spi_tegra *regs; - unsigned int freq; - unsigned int mode; -}; - -static inline struct tegra_spi_slave *to_tegra_spi(struct spi_slave *slave) -{ - return container_of(slave, struct tegra_spi_slave, slave); -} - -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - /* Tegra2 SPI-Flash - only 1 device ('bus/cs') */ - if (bus != 0 || cs != 0) - return 0; - else - return 1; -} - -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode) -{ - struct tegra_spi_slave *spi; - - if (!spi_cs_is_valid(bus, cs)) { - printf("SPI error: unsupported bus %d / chip select %d\n", - bus, cs); - return NULL; - } - - if (max_hz > TEGRA2_SPI_MAX_FREQ) { - printf("SPI error: unsupported frequency %d Hz. Max frequency" - " is %d Hz\n", max_hz, TEGRA2_SPI_MAX_FREQ); - return NULL; - } - - spi = malloc(sizeof(struct tegra_spi_slave)); - if (!spi) { - printf("SPI error: malloc of SPI structure failed\n"); - return NULL; - } - spi->slave.bus = bus; - spi->slave.cs = cs; - spi->freq = max_hz; - spi->regs = (struct spi_tegra *)TEGRA2_SPI_BASE; - spi->mode = mode; - - return &spi->slave; -} - -void spi_free_slave(struct spi_slave *slave) -{ - struct tegra_spi_slave *spi = to_tegra_spi(slave); - - free(spi); -} - -void spi_init(void) -{ - /* do nothing */ -} - -int spi_claim_bus(struct spi_slave *slave) -{ - struct tegra_spi_slave *spi = to_tegra_spi(slave); - struct spi_tegra *regs = spi->regs; - u32 reg; - - /* Change SPI clock to correct frequency, PLLP_OUT0 source */ - clock_start_periph_pll(PERIPH_ID_SPI1, CLOCK_ID_PERIPH, spi->freq); - - /* Clear stale status here */ - reg = SPI_STAT_RDY | SPI_STAT_RXF_FLUSH | SPI_STAT_TXF_FLUSH | \ - SPI_STAT_RXF_UNR | SPI_STAT_TXF_OVF; - writel(reg, ®s->status); - debug("spi_init: STATUS = %08x\n", readl(®s->status)); - - /* - * Use sw-controlled CS, so we can clock in data after ReadID, etc. - */ - reg = (spi->mode & 1) << SPI_CMD_ACTIVE_SDA_SHIFT; - if (spi->mode & 2) - reg |= 1 << SPI_CMD_ACTIVE_SCLK_SHIFT; - clrsetbits_le32(®s->command, SPI_CMD_ACTIVE_SCLK_MASK | - SPI_CMD_ACTIVE_SDA_MASK, SPI_CMD_CS_SOFT | reg); - debug("spi_init: COMMAND = %08x\n", readl(®s->command)); - - /* - * SPI pins on Tegra2 are muxed - change pinmux later due to UART - * issue. - */ - pinmux_set_func(PINGRP_GMD, PMUX_FUNC_SFLASH); - pinmux_tristate_disable(PINGRP_LSPI); - -#ifndef CONFIG_SPI_UART_SWITCH - /* - * NOTE: - * Only set PinMux bits 3:2 to SPI here on boards that don't have the - * SPI UART switch or subsequent UART data won't go out! See - * spi_uart_switch(). - */ - /* TODO: pinmux_set_func(PINGRP_GMC, PMUX_FUNC_SFLASH); */ -#endif - return 0; -} - -void spi_release_bus(struct spi_slave *slave) -{ - /* - * We can't release UART_DISABLE and set pinmux to UART4 here since - * some code (e,g, spi_flash_probe) uses printf() while the SPI - * bus is held. That is arguably bad, but it has the advantage of - * already being in the source tree. - */ -} - -void spi_cs_activate(struct spi_slave *slave) -{ - struct tegra_spi_slave *spi = to_tegra_spi(slave); - - pinmux_select_spi(); - - /* CS is negated on Tegra, so drive a 1 to get a 0 */ - setbits_le32(&spi->regs->command, SPI_CMD_CS_VAL); - - corrupt_delay(); /* Let UART settle */ -} - -void spi_cs_deactivate(struct spi_slave *slave) -{ - struct tegra_spi_slave *spi = to_tegra_spi(slave); - - pinmux_select_uart(); - - /* CS is negated on Tegra, so drive a 0 to get a 1 */ - clrbits_le32(&spi->regs->command, SPI_CMD_CS_VAL); - - corrupt_delay(); /* Let SPI settle */ -} - -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, - const void *data_out, void *data_in, unsigned long flags) -{ - struct tegra_spi_slave *spi = to_tegra_spi(slave); - struct spi_tegra *regs = spi->regs; - u32 reg, tmpdout, tmpdin = 0; - const u8 *dout = data_out; - u8 *din = data_in; - int num_bytes; - int ret; - - debug("spi_xfer: slave %u:%u dout %08X din %08X bitlen %u\n", - slave->bus, slave->cs, *(u8 *)dout, *(u8 *)din, bitlen); - if (bitlen % 8) - return -1; - num_bytes = bitlen / 8; - - ret = 0; - - reg = readl(®s->status); - writel(reg, ®s->status); /* Clear all SPI events via R/W */ - debug("spi_xfer entry: STATUS = %08x\n", reg); - - reg = readl(®s->command); - reg |= SPI_CMD_TXEN | SPI_CMD_RXEN; - writel(reg, ®s->command); - debug("spi_xfer: COMMAND = %08x\n", readl(®s->command)); - - if (flags & SPI_XFER_BEGIN) - spi_cs_activate(slave); - - /* handle data in 32-bit chunks */ - while (num_bytes > 0) { - int bytes; - int is_read = 0; - int tm, i; - - tmpdout = 0; - bytes = (num_bytes > 4) ? 4 : num_bytes; - - if (dout != NULL) { - for (i = 0; i < bytes; ++i) - tmpdout = (tmpdout << 8) | dout[i]; - } - - num_bytes -= bytes; - if (dout) - dout += bytes; - - clrsetbits_le32(®s->command, SPI_CMD_BIT_LENGTH_MASK, - bytes * 8 - 1); - writel(tmpdout, ®s->tx_fifo); - setbits_le32(®s->command, SPI_CMD_GO); - - /* - * Wait for SPI transmit FIFO to empty, or to time out. - * The RX FIFO status will be read and cleared last - */ - for (tm = 0, is_read = 0; tm < SPI_TIMEOUT; ++tm) { - u32 status; - - status = readl(®s->status); - - /* We can exit when we've had both RX and TX activity */ - if (is_read && (status & SPI_STAT_TXF_EMPTY)) - break; - - if ((status & (SPI_STAT_BSY | SPI_STAT_RDY)) != - SPI_STAT_RDY) - tm++; - - else if (!(status & SPI_STAT_RXF_EMPTY)) { - tmpdin = readl(®s->rx_fifo); - is_read = 1; - - /* swap bytes read in */ - if (din != NULL) { - for (i = bytes - 1; i >= 0; --i) { - din[i] = tmpdin & 0xff; - tmpdin >>= 8; - } - din += bytes; - } - } - } - - if (tm >= SPI_TIMEOUT) - ret = tm; - - /* clear ACK RDY, etc. bits */ - writel(readl(®s->status), ®s->status); - } - - if (flags & SPI_XFER_END) - spi_cs_deactivate(slave); - - debug("spi_xfer: transfer ended. Value=%08x, status = %08x\n", - tmpdin, readl(®s->status)); - - if (ret) { - printf("spi_xfer: timeout during SPI transfer, tm %d\n", ret); - return -1; - } - - return 0; -} diff --git a/drivers/spi/tegra_spi.c b/drivers/spi/tegra_spi.c new file mode 100644 index 0000000..4a3e799 --- /dev/null +++ b/drivers/spi/tegra_spi.c @@ -0,0 +1,290 @@ +/* + * Copyright (c) 2010-2012 NVIDIA Corporation + * With help from the mpc8xxx SPI driver + * With more help from omap3_spi SPI driver + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_SPI_CORRUPTS_UART) + #define corrupt_delay() udelay(CONFIG_SPI_CORRUPTS_UART_DLY); +#else + #define corrupt_delay() +#endif + +struct tegra_spi_slave { + struct spi_slave slave; + struct spi_tegra *regs; + unsigned int freq; + unsigned int mode; +}; + +static inline struct tegra_spi_slave *to_tegra_spi(struct spi_slave *slave) +{ + return container_of(slave, struct tegra_spi_slave, slave); +} + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + /* Tegra2 SPI-Flash - only 1 device ('bus/cs') */ + if (bus != 0 || cs != 0) + return 0; + else + return 1; +} + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + struct tegra_spi_slave *spi; + + if (!spi_cs_is_valid(bus, cs)) { + printf("SPI error: unsupported bus %d / chip select %d\n", + bus, cs); + return NULL; + } + + if (max_hz > TEGRA2_SPI_MAX_FREQ) { + printf("SPI error: unsupported frequency %d Hz. Max frequency" + " is %d Hz\n", max_hz, TEGRA2_SPI_MAX_FREQ); + return NULL; + } + + spi = malloc(sizeof(struct tegra_spi_slave)); + if (!spi) { + printf("SPI error: malloc of SPI structure failed\n"); + return NULL; + } + spi->slave.bus = bus; + spi->slave.cs = cs; + spi->freq = max_hz; + spi->regs = (struct spi_tegra *)TEGRA2_SPI_BASE; + spi->mode = mode; + + return &spi->slave; +} + +void spi_free_slave(struct spi_slave *slave) +{ + struct tegra_spi_slave *spi = to_tegra_spi(slave); + + free(spi); +} + +void spi_init(void) +{ + /* do nothing */ +} + +int spi_claim_bus(struct spi_slave *slave) +{ + struct tegra_spi_slave *spi = to_tegra_spi(slave); + struct spi_tegra *regs = spi->regs; + u32 reg; + + /* Change SPI clock to correct frequency, PLLP_OUT0 source */ + clock_start_periph_pll(PERIPH_ID_SPI1, CLOCK_ID_PERIPH, spi->freq); + + /* Clear stale status here */ + reg = SPI_STAT_RDY | SPI_STAT_RXF_FLUSH | SPI_STAT_TXF_FLUSH | \ + SPI_STAT_RXF_UNR | SPI_STAT_TXF_OVF; + writel(reg, ®s->status); + debug("spi_init: STATUS = %08x\n", readl(®s->status)); + + /* + * Use sw-controlled CS, so we can clock in data after ReadID, etc. + */ + reg = (spi->mode & 1) << SPI_CMD_ACTIVE_SDA_SHIFT; + if (spi->mode & 2) + reg |= 1 << SPI_CMD_ACTIVE_SCLK_SHIFT; + clrsetbits_le32(®s->command, SPI_CMD_ACTIVE_SCLK_MASK | + SPI_CMD_ACTIVE_SDA_MASK, SPI_CMD_CS_SOFT | reg); + debug("spi_init: COMMAND = %08x\n", readl(®s->command)); + + /* + * SPI pins on Tegra2 are muxed - change pinmux later due to UART + * issue. + */ + pinmux_set_func(PINGRP_GMD, PMUX_FUNC_SFLASH); + pinmux_tristate_disable(PINGRP_LSPI); + +#ifndef CONFIG_SPI_UART_SWITCH + /* + * NOTE: + * Only set PinMux bits 3:2 to SPI here on boards that don't have the + * SPI UART switch or subsequent UART data won't go out! See + * spi_uart_switch(). + */ + /* TODO: pinmux_set_func(PINGRP_GMC, PMUX_FUNC_SFLASH); */ +#endif + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ + /* + * We can't release UART_DISABLE and set pinmux to UART4 here since + * some code (e,g, spi_flash_probe) uses printf() while the SPI + * bus is held. That is arguably bad, but it has the advantage of + * already being in the source tree. + */ +} + +void spi_cs_activate(struct spi_slave *slave) +{ + struct tegra_spi_slave *spi = to_tegra_spi(slave); + + pinmux_select_spi(); + + /* CS is negated on Tegra, so drive a 1 to get a 0 */ + setbits_le32(&spi->regs->command, SPI_CMD_CS_VAL); + + corrupt_delay(); /* Let UART settle */ +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + struct tegra_spi_slave *spi = to_tegra_spi(slave); + + pinmux_select_uart(); + + /* CS is negated on Tegra, so drive a 0 to get a 1 */ + clrbits_le32(&spi->regs->command, SPI_CMD_CS_VAL); + + corrupt_delay(); /* Let SPI settle */ +} + +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, + const void *data_out, void *data_in, unsigned long flags) +{ + struct tegra_spi_slave *spi = to_tegra_spi(slave); + struct spi_tegra *regs = spi->regs; + u32 reg, tmpdout, tmpdin = 0; + const u8 *dout = data_out; + u8 *din = data_in; + int num_bytes; + int ret; + + debug("spi_xfer: slave %u:%u dout %08X din %08X bitlen %u\n", + slave->bus, slave->cs, *(u8 *)dout, *(u8 *)din, bitlen); + if (bitlen % 8) + return -1; + num_bytes = bitlen / 8; + + ret = 0; + + reg = readl(®s->status); + writel(reg, ®s->status); /* Clear all SPI events via R/W */ + debug("spi_xfer entry: STATUS = %08x\n", reg); + + reg = readl(®s->command); + reg |= SPI_CMD_TXEN | SPI_CMD_RXEN; + writel(reg, ®s->command); + debug("spi_xfer: COMMAND = %08x\n", readl(®s->command)); + + if (flags & SPI_XFER_BEGIN) + spi_cs_activate(slave); + + /* handle data in 32-bit chunks */ + while (num_bytes > 0) { + int bytes; + int is_read = 0; + int tm, i; + + tmpdout = 0; + bytes = (num_bytes > 4) ? 4 : num_bytes; + + if (dout != NULL) { + for (i = 0; i < bytes; ++i) + tmpdout = (tmpdout << 8) | dout[i]; + } + + num_bytes -= bytes; + if (dout) + dout += bytes; + + clrsetbits_le32(®s->command, SPI_CMD_BIT_LENGTH_MASK, + bytes * 8 - 1); + writel(tmpdout, ®s->tx_fifo); + setbits_le32(®s->command, SPI_CMD_GO); + + /* + * Wait for SPI transmit FIFO to empty, or to time out. + * The RX FIFO status will be read and cleared last + */ + for (tm = 0, is_read = 0; tm < SPI_TIMEOUT; ++tm) { + u32 status; + + status = readl(®s->status); + + /* We can exit when we've had both RX and TX activity */ + if (is_read && (status & SPI_STAT_TXF_EMPTY)) + break; + + if ((status & (SPI_STAT_BSY | SPI_STAT_RDY)) != + SPI_STAT_RDY) + tm++; + + else if (!(status & SPI_STAT_RXF_EMPTY)) { + tmpdin = readl(®s->rx_fifo); + is_read = 1; + + /* swap bytes read in */ + if (din != NULL) { + for (i = bytes - 1; i >= 0; --i) { + din[i] = tmpdin & 0xff; + tmpdin >>= 8; + } + din += bytes; + } + } + } + + if (tm >= SPI_TIMEOUT) + ret = tm; + + /* clear ACK RDY, etc. bits */ + writel(readl(®s->status), ®s->status); + } + + if (flags & SPI_XFER_END) + spi_cs_deactivate(slave); + + debug("spi_xfer: transfer ended. Value=%08x, status = %08x\n", + tmpdin, readl(®s->status)); + + if (ret) { + printf("spi_xfer: timeout during SPI transfer, tm %d\n", ret); + return -1; + } + + return 0; +} diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index f46740e..db11d8a 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -67,7 +67,7 @@ #define CONFIG_BOARD_EARLY_INIT_F /* SPI */ -#define CONFIG_TEGRA2_SPI +#define CONFIG_TEGRA_SPI #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_WINBOND #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 -- cgit v0.10.2