From 0e3ece33801e377be67ffa29f083421ad820f28b Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 14 Jan 2009 23:26:05 +0100 Subject: Prepare 2009.01-rc2 Update CHANGELOG. Signed-off-by: Wolfgang Denk diff --git a/CHANGELOG b/CHANGELOG index 9af36c1..17c5691 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,579 @@ +commit e92c9a860e44c14513c8909ce4299e253a775eeb +Author: Wolfgang Denk +Date: Wed Jan 14 22:35:30 2009 +0100 + + cpu/mpc824x/Makefile: fix warning with parallel builds + + Parallel builds would occasionally issue this build warning: + + ln: creating symbolic link `cpu/mpc824x/bedbug_603e.c': File exists + + Use "ln -sf" as quick work around for the issue. + + Signed-off-by: Wolfgang Denk + +commit b5f65dfa9aa8e068e62aba4733dc4fd97b1d9bf6 +Author: Haiying Wang +Date: Tue Jan 13 16:29:28 2009 -0500 + + Some changes of TLB entry setting for MPC8572DS + + - Move the TLB entry of PIXIS_BASE from TLB0 to TLB1[8], because in CAMP mode, + all the TLB0 entries will be invalidated after cpu1 brings up kernel, thus cpu0 + can not access PIXIS_BASE anymore (any access will cause DataTLBError exception) + + - Set CONFIG_SYS_DDR_TLB_START to 9 for MPC8572DS board. + + Signed-off-by: Haiying Wang + +commit 950264317eb9594b2b5ee2fb65206200a1c6007a +Author: Haiying Wang +Date: Tue Jan 13 16:29:22 2009 -0500 + + Change DDR tlb start entry to CONFIG param for 85xx + + So that we can locate the DDR tlb start entry to the value other than 8. By + default, it is still 8. + + Signed-off-by: Haiying Wang + +commit 6d3a10f73ece7ffb736890c10e023222612a4aa0 +Author: Roy Zang +Date: Fri Jan 9 16:02:35 2009 +0800 + + Change PCIE1&2 deciide logic on MPC8544DS board more readable + + The IO port selection for MPC8544DS board: + Port cfg_io_ports + PCIE1 0x2, 0x3, 0x4, 0x5, 0x6, 0x7 + PCIE2 0x4, 0x5, 0x6, 0x7 + PCIE3 0x6, 0x7 + This patch changes the PCIE12 and PCIE2 logic more readable. + Signed-off-by: Roy Zang + +commit 028e116811d28a031660f1ad9e20ac1293b3c5c7 +Author: Roy Zang +Date: Fri Jan 9 16:01:52 2009 +0800 + + PCIE2 and PCIE3 are decided by corresponing bit in devdisr instead of PCIE1 bit + + PCIE2 and PCIE3 should be decided by corresponing bit in devdisr instead of + PCIE1 bit. + On MPC8572DS board, PCIE refers to PCIE1. + Signed-off-by: Roy Zang + +commit 9afc2ef0307aecf52482df67c31b75d5f9e66b47 +Author: Roy Zang +Date: Fri Jan 9 16:00:55 2009 +0800 + + Fix IO port selection issue on MPC8544DS and MPC8572DS boards + + The IO port selection is not correct on MPC8572DS and MPC8544DS board. + This patch fixes this issue. + For MPC8572 + Port cfg_io_ports + PCIE1 0x2, 0x3, 0x7, 0xb, 0xc, 0xf + PCIE2 0x3, 0x7 + PCIE3 0x7 + + For MPC8544 + Port cfg_io_ports + PCIE1 0x2, 0x3, 0x4, 0x5, 0x6, 0x7 + PCIE2 0x4, 0x5, 0x6, 0x7 + PCIE3 0x6, 0x7 + Signed-off-by: Roy Zang + +commit 3e3fffe3baf3befde287fec1fcbfe55052fb8946 +Author: Becky Bruce +Date: Wed Dec 3 22:36:44 2008 -0600 + + mpc8610hpcd: Fix PCI mapping concepts + + Rename _BASE to _BUS, as it's actually a PCI bus address, + separate virtual and physical addresses into _VIRT and _PHYS, + and use each appopriately. This makes the code easier to read + and understand, and facilitates mapping changes going forward. + + Signed-off-by: Becky Bruce + +commit 79e436cad3b4a7db88408c3f05175028f30d700d +Author: Becky Bruce +Date: Wed Dec 3 22:36:26 2008 -0600 + + sbc8641d: Fix PCI mapping concepts + + Rename _BASE to _BUS, as it's actually a PCI bus address, + separate virtual and physical addresses into _VIRT and _PHYS, + and use each appopriately. This makes the code easier to read + and understand, and facilitates mapping changes going forward. + + Signed-off-by: Becky Bruce + +commit a9f3acbcd07da72b5446ce557531a3ed8b8beff0 +Author: Wolfgang Denk +Date: Mon Jan 12 14:50:35 2009 +0100 + + MPC86xx: fix build warnings + + Signed-off-by: Wolfgang Denk + +commit 032a1c934ef4dc003281f57302b6e693062c1868 +Author: Mike Frysinger +Date: Mon Jan 5 16:09:44 2009 -0500 + + bf537-stamp/nand: fix board_nand_init prototype + + The board_nand_init() function should return an int, not void. + + Signed-off-by: Mike Frysinger + +commit 687f952e4119594ab913be11c90f7f018c2a7a79 +Author: Mike Frysinger +Date: Thu Dec 11 07:04:48 2008 -0500 + + Blackfin: drop CONFIG_SPI handling in board init + + The eeprom SPI init functions are duplicated as the common code already + executes these for us. + + Signed-off-by: Mike Frysinger + +commit e7e684b10d73a303902208594c7c3e7e0d753282 +Author: Mike Frysinger +Date: Fri Oct 24 17:51:57 2008 -0400 + + Blackfin: fix out-of-tree building with ldscripts + + Many of the Blackfin board linker scripts are preprocessed, so make sure we + output the linker script into the build tree rather than the source tree. + + Signed-off-by: Mike Frysinger + +commit b9eecc342f767b50e1476fbc1aad7d88dd4ce5eb +Author: Mike Frysinger +Date: Fri Oct 24 17:48:54 2008 -0400 + + Blackfin: fix linker scripts to work with --gc-sections + + Make sure all .text sections get pulled in and the entry point is properly + referenced so they don't get discarded when linking with --gc-sections. + + Signed-off-by: Mike Frysinger + +commit 509fc553bc6087a6f705b3bf52f3950d7d1eaa58 +Author: Mike Frysinger +Date: Sat Oct 11 20:45:44 2008 -0400 + + Blackfin: set proper LDRFLAGS for parallel booting LDRs + + In order to boot an LDR out of parallel flash, the ldr utility needs a few + flags to tell it to generate the right header. + + Signed-off-by: Mike Frysinger + +commit 3dd9395a0d7ce69a335d0e743c04b9caedd681d3 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Jan 6 21:41:59 2009 +0100 + + at91rm9200: move define from lowlevel_init to header + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 8a48686fac2030287765f1970ea046bd5734b733 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Jan 3 17:22:26 2009 +0100 + + m501sk: move to the common memory setup + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit d481c80d78f954133c035dae6c7d22de3625795d +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Jan 3 17:22:25 2009 +0100 + + at91rm9200: rename lowlevel init value to CONFIG_SYS_ + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 4e170b16625291aa10d0d9abc3f34e8a5945d157 +Author: Nicolas Ferre +Date: Tue Jan 6 21:13:14 2009 +0100 + + at91: add at91sam9xeek board support + + At91sam9xe is basically an at91sam9260 with embedded flash. We can manage + it as another entry for at91sam9260 in the Makefile. + + Check documentation at : + http://www.atmel.com/dyn/products/product_card.asp?part_id=4263 + + Signed-off-by: Nicolas Ferre + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 9ffd53db870a7da134f9a1ae76894a6b31237be5 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Jan 6 21:15:57 2009 +0100 + + fix bmp_logo.h make dependencies to allow parallel build + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit e12d9a8fb48d24176efffccc072b445e60a3afe4 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Jan 3 17:22:24 2009 +0100 + + at91: Fix Atmel's at91sam9 boards out of tree build + + introduced in commit 89a7a87f084c + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 0668236bafaa1c11c521652a2facebc74beecbf0 +Author: Wolfgang Denk +Date: Tue Dec 30 22:56:11 2008 +0100 + + README: update mailing list name and hits to patch submission. + + Signed-off-by: Wolfgang Denk + +commit d9011f9b75561a0bd9254934c2bb2bc799d4f645 +Author: Peter Tyser +Date: Tue Dec 23 16:32:01 2008 -0600 + + 85xx: Enable inbound PCI config cycles for X-ES boards cleanup + + Signed-off-by: Peter Tyser + +commit 1f03cbfae221b24ba1341a0a3f62ff01c5c874df +Author: Peter Tyser +Date: Tue Dec 23 16:32:00 2008 -0600 + + XPedite5200 board support cleanup + + Signed-off-by: Peter Tyser + +commit fea91edee8ae0295e3c30b1ff544df51f4d668e1 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Dec 2 21:58:04 2008 +0100 + + usb_kbd: fix usb_kbd_deregister when DEVICE_DEREGISTER not enable + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Remy Böhmer + +commit ada591d2a0ecff5f9bc5ed1ebf310f439c3d0a28 +Author: Trent Piepho +Date: Wed Dec 3 15:16:37 2008 -0800 + + mpc8[56]xx: Put localbus clock in sysinfo and gd + + Currently MPC85xx and MPC86xx boards just calculate the localbus frequency + and print it out, but don't save it. + + This changes where its calculated and stored to be more consistent with the + CPU, CCB, TB, and DDR frequencies and the MPC83xx localbus clock. + + The localbus frequency is added to sysinfo and calculated when sysinfo is + set up, in cpu/mpc8[56]xx/speed.c, the same as the other frequencies are. + + get_clocks() copies the frequency into the global data, as the other + frequencies are, into a new field that is only enabled for MPC85xx and + MPC86xx. + + checkcpu() in cpu/mpc8[56]xx/cpu.c will print out the local bus frequency + from sysinfo, like the other frequencies, instead of calculating it on the + spot. + + Signed-off-by: Trent Piepho + Acked-by: Kumar Gala + Acked-by: Jon Loeliger + +commit 9863d6aca11405e1e0d8aba2045d78aeec4d4ee7 +Author: Trent Piepho +Date: Wed Dec 3 15:16:36 2008 -0800 + + mpc86xx: Double local bus clock divider + + The local bus clock divider should be doubled for both 8610 and 8641. + + Signed-off-by: Trent Piepho + Acked-by: Kumar Gala + Acked-by: Jon Loeliger + +commit 446c381e3e16f19857b72ea0d06241267b8b9d58 +Author: Trent Piepho +Date: Wed Dec 3 15:16:35 2008 -0800 + + mpc8568: Double local bus clock divider + + The clock divider for the MPC8568 local bus should be doubled, like the + other newer MPC85xx chips. + + Since there are now more chips with a 2x divider than a 1x, and any new + 85xx chips will probably be 2x, invert the sense of the #if so that it + lists the 1x chips instead of the 2x ones. + + Signed-off-by: Trent Piepho + Acked-by: Kumar Gala + Acked-by: Jon Loeliger + +commit f51f07eb58fad12de9294ba4ee6c09a0ddeaee03 +Author: Dave Liu +Date: Tue Dec 16 12:09:27 2008 +0800 + + 85xx: Fix the boot window issue + + If one custom board is using the 8MB flash, it is set + as FLASH_BASE = 0xef000000, TEXT_BASE = 0xef780000. + The current start.S code will be broken at switch_as. + + It is because the TLB1[15] is set as 16MB page size, + EPN = TEXT_BASE & 0xff000000, RPN = 0xff000000. + + For the 8MB flash case, the EPN = 0xefxxxxxx, + RPN = 0xffxxxxxx. Assume the virt address of switch_as + is 0xef7ff18c, the real address of the instruction at + switch_as should be 0xff7ff18c. the 0xff7ff18c is out + of the range of the default 8MB boot LAW window + 0xff800000 - 0xffffffff. + + So when we switch to AS1 address space at switch_as, + the core can't fetch the instruction at switch_as any + more. It will cause broken issue. + + Signed-off-by: Dave Liu + +commit 58da8890d5fbd074746037722a423de9ac408616 +Author: Paul Gortmaker +Date: Thu Dec 11 15:47:50 2008 -0500 + + sbc8548: use proper PHY address + + The values given for the PHY address were wrong, so the code + read no valid PHY ID, and fell through to the generic PHY + support, which would work on 1000M but would not auto negotiate + down to 100M or 10M. + + Signed-off-by: Paul Gortmaker + +commit ad22f9273c6f24fbfa917e867680e9688e0c59c5 +Author: Paul Gortmaker +Date: Thu Dec 11 15:47:51 2008 -0500 + + sbc8548: enable command line editing by default. + + Lets make things a bit more user friendly. It isn't 1985 anymore. + + Signed-off-by: Paul Gortmaker + +commit bd93105fa171184a71ca8b22be03dc2705cfbd3f +Author: Paul Gortmaker +Date: Thu Dec 11 15:47:49 2008 -0500 + + sbc8548: don't enable the 3rd and 4th eTSEC + + These interfaces don't have usable connectors on the board, so don't + bother enumerating or configuring them. + + Signed-off-by: Paul Gortmaker + +commit 181a3650113883728927928b3ac81ad6dade4b2c +Author: Haiying Wang +Date: Wed Dec 3 10:08:19 2008 -0500 + + Set IVPR to kenrel entry point in second core boot page + + Assuming the OSes exception vectors start from the base of kernel address, and + the kernel physical starting address can be relocated to an non-zero address. + This patch enables the second core to have a valid IVPR for debugger before + kernel setting IVPR in CAMP mode. Otherwise, IVPR is 0x0 and it is not a valid + value for second core which runs kernel at different physical address other + than 0x0. + + Signed-off-by: Haiying Wang + +commit a5d212a263c58cc746481bf1fc878510533ce7d6 +Author: Trent Piepho +Date: Wed Dec 3 15:16:34 2008 -0800 + + mpc8xxx: LCRR[CLKDIV] is sometimes five bits + + On newer CPUs, 8536, 8572, and 8610, the CLKDIV field of LCRR is five bits + instead of four. + + In order to avoid an ifdef, LCRR_CLKDIV is set to 0x1f on all systems. It + should be safe as the fifth bit was defined as reserved and set to 0. + + Code that was using a hard coded 0x0f is changed to use LCRR_CLKDIV. + + Signed-off-by: Trent Piepho + Acked-by: Kumar Gala + Acked-by: Jon Loeliger + +commit 58ec4866ed916c7e422f5107bb27b0822084728e +Author: Trent Piepho +Date: Wed Dec 3 15:16:38 2008 -0800 + + mpc8[56]xx: Put localbus clock in device tree + + Export the localbus frequency in the device tree, the same way the CPU, TB, + CCB, and various other frequencies are exported in their respective device + tree nodes. + + Some localbus devices need this information to be programed correctly, so + it makes sense to export it along with the other frequencies. + + Unfortunately, when someone wrote the localbus dts bindings, they didn't + bother to define what the "compatible" property should be. So it seems no + one was quite sure what to put in their dts files. + + Based on current existing dts files in the kernel source, I've used + "fsl,pq3-localbus" and "fsl,elbc" for MPC85xx, which are used by almost all + of the 85xx devices, and are looked for by the Linux code. The eLBC is + apparently not entirely backward compatible with the pq3 LBC and so eLBC + equipped platforms like 8572 won't use pq3-localbus. + + For MPC86xx, I've used "fsl,elbc" which is used by some of the 86xx systems + and is also looked for by the Linux code. On MPC8641, I've also used + "fsl,mpc8641-localbus" as it is also commonly used in dts files, some of + which don't use "fsl,elbc" or any other acceptable name to match on. + + Signed-off-by: Trent Piepho + Acked-by: Kumar Gala + Acked-by: Jon Loeliger + +commit 9d94aff699eed38b286814fcbb335f3eb8516a0e +Author: Kumar Gala +Date: Tue Dec 16 14:59:22 2008 -0600 + + NAND FSL elbc: Use virt_to_phys to determine which bank is in use + + The current code that determines which bank/chipselect is used for a + given NAND instance only worked for 32-bit addresses and assumed + a 1:1 mapping. This breaks in 36-bit physical configs. + + The proper way to handle this is to use the virt_to_phys() and + BR_PHYS_ADDR() routinues to match the 34-bit lbc bus address + with the the virtual address the NAND code uses. + + Signed-off-by: Kumar Gala + Acked-by: Scott Wood + +commit 77c8115b1f1871811633eae77a5a700fac1f0e50 +Author: Kumar Gala +Date: Tue Dec 16 14:59:21 2008 -0600 + + ppc: Use addrmap in virt_to_phys and map_physmem. + + If we have addr map support enabled use the mapping functions to + implement virt_to_phys() and map_physmem(). + + Signed-off-by: Kumar Gala + +commit ecf5b98c7a6a2e2256dfddd48fab26678dcd6b90 +Author: Kumar Gala +Date: Tue Dec 16 14:59:20 2008 -0600 + + 85xx: Add support to populate addr map based on TLB settings + + Signed-off-by: Kumar Gala + +commit 78bbc5ce151c5a484bb51bf1866b4a993ffc16ec +Author: Peter Tyser +Date: Mon Dec 1 13:47:13 2008 -0600 + + XPedite5200 board support + + Initial support for Extreme Engineering Solutions XPedite5200 - + a MPC8548-based PMC single board computer. + + Signed-off-by: Peter Tyser + +commit 487dcb4fb89be0992bc06ec1341090017bd9cf2f +Author: Peter Tyser +Date: Wed Oct 29 12:39:27 2008 -0500 + + 85xx: Enable inbound PCI config cycles for X-ES boards + + Update X-ES Freescale boards to allow inbound PCI configuration + cycles when configured as agent/endpoint. + + Signed-off-by: Peter Tyser + +commit ccf0fdd02b97323f8caae18d06cc9daeac2f192f +Author: Peter Tyser +Date: Wed Dec 17 16:36:23 2008 -0600 + + XPedite5370 board support + + Initial support for Extreme Engineering Solutions XPedite5370 - + a MPC8572-based 3U VPX single board computer with a PMC/XMC + site. + + Signed-off-by: Peter Tyser + +commit e92739d34e2d6b6aca93b2598248210710897ce8 +Author: Peter Tyser +Date: Wed Dec 17 16:36:21 2008 -0600 + + Add support for PCA953x I2C gpio devices + + Initial support for NXP's 4 and 8 bit I2C gpio expanders + (eg pca9537, pca9557, etc). The CONFIG_PCA953X define + enables support for the devices while the CONFIG_CMD_PCA953X + define enables the pca953x command. The CONFIG_CMD_PCA953X_INFO + define enables an 'info' sub-command which provides summary + information for the given pca953x device. + + Signed-off-by: Peter Tyser + +commit 7a8979591171676417ab36852d8811a8c46accd8 +Author: Peter Tyser +Date: Wed Oct 29 12:39:26 2008 -0500 + + pci/fsl_pci_init: Enable inbound PCI config cycles + + Add fsl_pci_config_unlock() function to enable a + PCI/PCIe interface configured in agent/endpoint mode to + respond to inbound PCI configuration cycles. + + Signed-off-by: Peter Tyser + +commit b616f2b545f73757669b37386f0b37bb61fc6797 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Mon Sep 8 22:27:18 2008 +0200 + + MIPS: qemu_mips: update doc to generate and to use qemu flash, ide file + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Shinya Kuribayashi + +commit 16cdf816779f5b602a9b3b4d2ea4dea05095c35b +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Dec 16 22:10:31 2008 +0100 + + MIPS: qemu_mips: update doc to use all disk and boot linux kernel + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Shinya Kuribayashi + +commit 13095b2f07dacb1f863772266c1789d47a523a8a +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Dec 16 22:10:30 2008 +0100 + + MIPS: qemu_mips: move env storage just after u-boot + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Shinya Kuribayashi + +commit aced78d852d0b009e8aaa1445af8cb40861ee549 +Author: Wolfgang Denk +Date: Tue Dec 16 23:48:27 2008 +0100 + + Prepare 2009.01-rc1 + + Signed-off-by: Wolfgang Denk + commit 9e2a79b4c585ad31138fb90b68fd0234d64a8da8 Author: Wolfgang Denk Date: Tue Dec 16 23:13:46 2008 +0100 @@ -21,6 +597,18 @@ Date: Tue Dec 16 22:32:25 2008 +0100 Signed-off-by: Wolfgang Denk +commit ff49ea8977b56916edd5b1766d9939010e30b181 +Author: Scott Wood +Date: Tue Dec 16 14:24:16 2008 -0600 + + NAND: Mark the BBT as scanned prior to calling scan_bbt. + + Otherwise, recursion can occur if scan_bbt does not find a bad block + table, and tries to write one, and the attempt to erase the BBT area + causes a bad block check. + + Signed-off-by: Scott Wood + commit 584eedab66d0828f2d571a24b10526c4e65f547b Author: Ilya Yanok Date: Thu Dec 11 05:51:57 2008 +0300 -- cgit v0.10.2