From e01bd218b00af73499331a1a701625a852cd286f Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 21 Mar 2007 13:38:59 +0100 Subject: [PATCH] Add AMCC PPC405EZ support This patch adds support for the new AMCC 405EZ PPC. It is in preparation for the AMCC Acadia board support. Please note that this Acadia/405EZ support is still in a beta stage. Still lot's of cleanup needed but we need a preliminary release now. Signed-off-by: Stefan Roese diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c index 4f55583..cf56581 100644 --- a/cpu/ppc4xx/4xx_enet.c +++ b/cpu/ppc4xx/4xx_enet.c @@ -1333,6 +1333,9 @@ int enetInt (struct eth_device *dev) } } mtdcr (uicsr, MAL_UIC_DEF|EMAC_UIC_DEF|EMAC_UIC_DEF1); /* Clear */ +#if defined(CONFIG_405EZ) + mtsdr (sdricintstat, SDR_ICRX_STAT | SDR_ICTX0_STAT | SDR_ICTX1_STAT); +#endif /* defined(CONFIG_405EZ) */ } while (serviced); diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c index b02f6f4..2d8740c 100644 --- a/cpu/ppc4xx/cpu.c +++ b/cpu/ppc4xx/cpu.c @@ -47,6 +47,9 @@ void board_reset(void); #if defined(CONFIG_440) #define FREQ_EBC (sys_info.freqEPB) +#elif defined(CONFIG_405EZ) +#define FREQ_EBC ((CONFIG_SYS_CLK_FREQ * sys_info.pllFbkDiv) / \ + sys_info.pllExtBusDiv) #else #define FREQ_EBC (sys_info.freqPLB / sys_info.pllExtBusDiv) #endif @@ -209,7 +212,8 @@ int checkcpu (void) puts("AMCC PowerPC 4"); -#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405EP) +#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ + defined(CONFIG_405EP) || defined(CONFIG_405EZ) puts("05"); #endif #if defined(CONFIG_440) @@ -257,6 +261,10 @@ int checkcpu (void) puts("EP Rev. B"); break; + case PVR_405EZ_RA: + puts("EZ Rev. A"); + break; + #if defined(CONFIG_440) case PVR_440GP_RB: puts("GP Rev. B"); @@ -386,9 +394,9 @@ int checkcpu (void) } printf (" at %s MHz (PLB=%lu, OPB=%lu, EBC=%lu MHz)\n", strmhz(buf, clock), - sys_info.freqPLB / 1000000, - sys_info.freqPLB / sys_info.pllOpbDiv / 1000000, - FREQ_EBC / 1000000); + sys_info.freqPLB / 1000000, + get_OPB_freq() / 1000000, + FREQ_EBC / 1000000); if (addstr[0] != 0) printf(" %s\n", addstr); @@ -418,7 +426,7 @@ int checkcpu (void) putc('\n'); #endif -#if defined(CONFIG_405EP) +#if defined(CONFIG_405EP) || defined(CONFIG_405EZ) printf (" 16 kB I-Cache 16 kB D-Cache"); #elif defined(CONFIG_440) printf (" 32 kB I-Cache 32 kB D-Cache"); diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c index 82ae443..9d1cd13 100644 --- a/cpu/ppc4xx/cpu_init.c +++ b/cpu/ppc4xx/cpu_init.c @@ -256,7 +256,8 @@ cpu_init_f (void) */ #if (defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR)) #if (defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ - defined(CONFIG_405EP) || defined(CONFIG_405)) + defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ + defined(CONFIG_405)) /* * Move the next instructions into icache, since these modify the flash * we are running from! diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c index fab0d95..e62dd9d 100644 --- a/cpu/ppc4xx/serial.c +++ b/cpu/ppc4xx/serial.c @@ -264,7 +264,8 @@ int serial_tstc () #endif /* CONFIG_IOP480 */ /*****************************************************************************/ -#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405EP) || \ +#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ + defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ defined(CONFIG_440) #if defined(CONFIG_440) @@ -309,7 +310,7 @@ int serial_tstc () #define MFREG(a, d) mfsdr(a, d) #define MTREG(a, d) mtsdr(a, d) #endif /* #if defined(CONFIG_440GP) */ -#elif defined(CONFIG_405EP) +#elif defined(CONFIG_405EP) || defined(CONFIG_405EZ) #define UART0_BASE 0xef600300 #define UART1_BASE 0xef600400 #define UCR0_MASK 0x0000007f @@ -392,47 +393,95 @@ volatile static serial_buffer_t buf_info; #if defined(CONFIG_440) && !defined(CFG_EXT_SERIAL_CLOCK) static void serial_divs (int baudrate, unsigned long *pudiv, - unsigned short *pbdiv ) + unsigned short *pbdiv) { - sys_info_t sysinfo; + sys_info_t sysinfo; unsigned long div; /* total divisor udiv * bdiv */ unsigned long umin; /* minimum udiv */ - unsigned short diff; /* smallest diff */ - unsigned long udiv; /* best udiv */ - - unsigned short idiff; /* current diff */ - unsigned short ibdiv; /* current bdiv */ + unsigned short diff; /* smallest diff */ + unsigned long udiv; /* best udiv */ + unsigned short idiff; /* current diff */ + unsigned short ibdiv; /* current bdiv */ unsigned long i; - unsigned long est; /* current estimate */ + unsigned long est; /* current estimate */ - get_sys_info( &sysinfo ); + get_sys_info(&sysinfo); - udiv = 32; /* Assume lowest possible serial clk */ - div = sysinfo.freqPLB/(16*baudrate); /* total divisor */ - umin = sysinfo.pllOpbDiv<<1; /* 2 x OPB divisor */ - diff = 32; /* highest possible */ + udiv = 32; /* Assume lowest possible serial clk */ + div = sysinfo.freqPLB / (16 * baudrate); /* total divisor */ + umin = sysinfo.pllOpbDiv << 1; /* 2 x OPB divisor */ + diff = 32; /* highest possible */ /* i is the test udiv value -- start with the largest * possible (32) to minimize serial clock and constrain * search to umin. */ - for( i = 32; i > umin; i-- ){ - ibdiv = div/i; + for (i = 32; i > umin; i--) { + ibdiv = div / i; est = i * ibdiv; idiff = (est > div) ? (est-div) : (div-est); - if( idiff == 0 ){ + if (idiff == 0) { udiv = i; break; /* can't do better */ - } - else if( idiff < diff ){ + } else if (idiff < diff) { udiv = i; /* best so far */ diff = idiff; /* update lowest diff*/ } } *pudiv = udiv; - *pbdiv = div/udiv; + *pbdiv = div / udiv; +} + +#elif defined(CONFIG_405EZ) + +static void serial_divs (int baudrate, unsigned long *pudiv, + unsigned short *pbdiv) +{ + sys_info_t sysinfo; + unsigned long div; /* total divisor udiv * bdiv */ + unsigned long umin; /* minimum udiv */ + unsigned short diff; /* smallest diff */ + unsigned long udiv; /* best udiv */ + unsigned short idiff; /* current diff */ + unsigned short ibdiv; /* current bdiv */ + unsigned long i; + unsigned long est; /* current estimate */ + unsigned long plloutb; + u32 reg; + + get_sys_info(&sysinfo); + plloutb = ((CONFIG_SYS_CLK_FREQ * sysinfo.pllFwdDiv * sysinfo.pllFbkDiv) + / sysinfo.pllFwdDivB); + udiv = 256; /* Assume lowest possible serial clk */ + div = plloutb / (16 * baudrate); /* total divisor */ + umin = (plloutb / get_OPB_freq()) << 1; /* 2 x OPB divisor */ + diff = 256; /* highest possible */ + + /* i is the test udiv value -- start with the largest + * possible (256) to minimize serial clock and constrain + * search to umin. + */ + for (i = 256; i > umin; i--) { + ibdiv = div / i; + est = i * ibdiv; + idiff = (est > div) ? (est-div) : (div-est); + if (idiff == 0) { + udiv = i; + break; /* can't do better */ + } else if (idiff < diff) { + udiv = i; /* best so far */ + diff = idiff; /* update lowest diff*/ + } + } + + *pudiv = udiv; + mfcpr(cprperd0, reg); + reg &= ~0x0000ffff; + reg |= ((udiv - 0) << 8) | (udiv - 0); + mtcpr(cprperd0, reg); + *pbdiv = div / udiv; } #endif /* defined(CONFIG_440) && !defined(CFG_EXT_SERIAL_CLK) */ @@ -518,6 +567,10 @@ int serial_init (void) unsigned short bdiv; volatile char val; +#if defined(CONFIG_405EZ) + serial_divs(gd->baudrate, &udiv, &bdiv); + clk = tmp = reg = 0; +#else #ifdef CONFIG_405EP reg = mfdcr(cpc0_ucr) & ~(UCR0_MASK | UCR1_MASK); clk = gd->cpu_clk; @@ -548,9 +601,9 @@ int serial_init (void) reg |= (udiv - 1) << CR0_UDIV_POS; /* set the UART divisor */ mtdcr (cntrl0, reg); #endif /* CONFIG_405EP */ - tmp = gd->baudrate * udiv * 16; bdiv = (clk + tmp / 2) / tmp; +#endif /* CONFIG_405EZ */ out8(UART_BASE + UART_LCR, 0x80); /* set DLAB bit */ out8(UART_BASE + UART_DLL, bdiv); /* set baudrate divisor */ diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c index 06220c3..028b11a 100644 --- a/cpu/ppc4xx/speed.c +++ b/cpu/ppc4xx/speed.c @@ -767,11 +767,119 @@ ulong get_PCI_freq (void) return val; } +#elif defined(CONFIG_405EZ) +void get_sys_info (PPC405_SYS_INFO * sysInfo) +{ + unsigned long cpr_plld; + unsigned long cpr_primad; + unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ/1000); + unsigned long primad_cpudv; + unsigned long m; + + /* + * Read PLL Mode registers + */ + mfcpr(cprplld, cpr_plld); + + /* + * Determine forward divider A + */ + sysInfo->pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16); + + /* + * Determine forward divider B (should be equal to A) + */ + sysInfo->pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8); + if (sysInfo->pllFwdDivB == 0) { + sysInfo->pllFwdDivB = 8; + } + + /* + * Determine FBK_DIV. + */ + sysInfo->pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24); + if (sysInfo->pllFbkDiv == 0) { + sysInfo->pllFbkDiv = 256; + } + + /* + * Read CPR_PRIMAD register + */ + mfcpr(cprprimad, cpr_primad); + /* + * Determine PLB_DIV. + */ + sysInfo->pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16); + if (sysInfo->pllPlbDiv == 0) { + sysInfo->pllPlbDiv = 16; + } + + /* + * Determine EXTBUS_DIV. + */ + sysInfo->pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK); + if (sysInfo->pllExtBusDiv == 0) { + sysInfo->pllExtBusDiv = 16; + } + + /* + * Determine OPB_DIV. + */ + sysInfo->pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8); + if (sysInfo->pllOpbDiv == 0) { + sysInfo->pllOpbDiv = 16; + } + + /* + * Determine the M factor + */ + m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB; + + /* + * Determine VCO clock frequency + */ + sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) / + (unsigned long long)sysClkPeriodPs; + + /* + * Determine CPU clock frequency + */ + primad_cpudv = ((cpr_primad & PRIMAD_CPUDV_MASK) >> 24); + if (primad_cpudv == 0) { + primad_cpudv = 16; + } + + sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) / primad_cpudv; + + /* + * Determine PLB clock frequency + */ + sysInfo->freqPLB = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) / sysInfo->pllPlbDiv; +} + +/******************************************** + * get_OPB_freq + * return OPB bus freq in Hz + *********************************************/ +ulong get_OPB_freq (void) +{ + ulong val = 0; + + PPC405_SYS_INFO sys_info; + + get_sys_info (&sys_info); + val = (CONFIG_SYS_CLK_FREQ * sys_info.pllFbkDiv) / sys_info.pllOpbDiv; + + return val; +} + #endif int get_clocks (void) { -#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || defined(CONFIG_405) || defined(CONFIG_405EP) +#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ + defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ + defined(CONFIG_440) || defined(CONFIG_405) sys_info_t sys_info; get_sys_info (&sys_info); @@ -796,7 +904,9 @@ ulong get_bus_freq (ulong dummy) { ulong val; -#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405) || defined(CONFIG_440) || defined(CONFIG_405EP) +#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ + defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ + defined(CONFIG_440) || defined(CONFIG_405) sys_info_t sys_info; get_sys_info (&sys_info); diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 24b30df..a50d66e 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -699,7 +699,9 @@ _start: #endif /* CONFIG_IOP480 */ /*****************************************************************************/ -#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405) || defined(CONFIG_405EP) +#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ + defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ + defined(CONFIG_405) /*----------------------------------------------------------------------- */ /* Clear and set up some registers. */ /*----------------------------------------------------------------------- */ @@ -727,13 +729,13 @@ _start: /*----------------------------------------------------------------------- */ /* Enable two 128MB cachable regions. */ /*----------------------------------------------------------------------- */ - addis r4,r0,0x8000 - addi r4,r4,0x0001 + lis r4,0x8000 + ori r4,r4,0x0001 mticcr r4 /* instruction cache */ isync - addis r4,r0,0x0000 - addi r4,r4,0x0000 + lis r4,0x0000 + ori r4,r4,0x0000 mtdccr r4 /* data cache */ #if !(defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR)) @@ -755,6 +757,70 @@ _start: #endif /* CONFIG_405EP */ #if defined(CFG_OCM_DATA_ADDR) && defined(CFG_OCM_DATA_SIZE) +/* test-only... (clean up later when NAND booting is supported) */ +#if defined(CONFIG_405EZ) + /******************************************************************** + * Setup OCM - On Chip Memory - PPC405EZ uses OCM Controller V2 + *******************************************************************/ + /* + * We can map the OCM on the PLB3, so map it at + * CFG_OCM_DATA_ADDR + 0x8000 + */ + lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */ + ori r3,r3,CFG_OCM_DATA_ADDR@l + ori r3,r3,0x8270 /* 32K Offset, 16K for Bank 1, R/W/Enable */ + mtdcr ocmplb3cr1,r3 /* Set PLB Access */ + ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */ + mtdcr ocmplb3cr2,r3 /* Set PLB Access */ + isync + + lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */ + ori r3,r3,CFG_OCM_DATA_ADDR@l + ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */ + mtdcr ocmdscr1, r3 /* Set Data Side */ + mtdcr ocmiscr1, r3 /* Set Instruction Side */ + ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */ + mtdcr ocmdscr2, r3 /* Set Data Side */ + mtdcr ocmiscr2, r3 /* Set Instruction Side */ + addis r3,0,0x0800 /* OCM Data Parity Disable - 1 Wait State */ + mtdcr ocmdsisdpc,r4 + + isync + +#if defined(CONFIG_NAND_SPL) + /* + * 405EZ can boot from NAND Flash. + * If we are booting the SPL (Pre-loader), copy code from + * the mapped 4K NAND Flash to the OCM + */ + li r4,(CFG_NAND_BOOT_SPL_SIZE >> 2) - 1 + mtctr r4 + lis r2,CFG_NAND_BOOT_SPL_SRC@h + ori r2,r2,CFG_NAND_BOOT_SPL_SRC@l + lis r3,CFG_NAND_BOOT_SPL_DST@h + ori r3,r3,CFG_NAND_BOOT_SPL_DST@l +spl_loop: + lwzu r4,4(r2) + stwu r4,4(r3) + bdnz spl_loop + + /* + * Jump to code in OCM Ram + */ + bl 00f +00: mflr r10 + lis r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@h + ori r3,r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@l + sub r10,r10,r3 + addi r10,r10,28 + mtlr r10 + blr +start_ram: + sync + isync +#endif +#else +/* ...test-only */ /******************************************************************** * Setup OCM - On Chip Memory *******************************************************************/ @@ -774,6 +840,7 @@ _start: addis r4, 0, 0xC000 /* OCM data area enabled */ mtdcr ocmdscntl, r4 isync +#endif /* CONFIG_405EZ */ #endif /*----------------------------------------------------------------------- */ diff --git a/cpu/ppc4xx/usb_ohci.c b/cpu/ppc4xx/usb_ohci.c index ab852c5..c71a6a9 100644 --- a/cpu/ppc4xx/usb_ohci.c +++ b/cpu/ppc4xx/usb_ohci.c @@ -76,7 +76,7 @@ #define m16_swap(x) swap_16(x) #define m32_swap(x) swap_32(x) -#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) +#if defined(CONFIG_405EZ) || defined(CONFIG_440EP) || defined(CONFIG_440EPX) #define ohci_cpu_to_le16(x) (x) #define ohci_cpu_to_le32(x) (x) #else @@ -1601,7 +1601,7 @@ int usb_lowlevel_init(void) gohci.irq = -1; #if defined(CONFIG_440EP) gohci.regs = (struct ohci_regs *)(CFG_PERIPHERAL_BASE | 0x1000); -#elif defined(CONFIG_440EPX) +#elif defined(CONFIG_440EPX) || defined(CFG_USB_HOST) gohci.regs = (struct ohci_regs *)(CFG_USB_HOST); #endif @@ -1625,8 +1625,10 @@ int usb_lowlevel_init(void) ohci_inited = 1; urb_finished = 1; +#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) /* init the device driver */ usb_dev_init(); +#endif return 0; } diff --git a/cpu/ppc4xx/vecnum.h b/cpu/ppc4xx/vecnum.h index 685d48b..bddf9e5 100644 --- a/cpu/ppc4xx/vecnum.h +++ b/cpu/ppc4xx/vecnum.h @@ -231,6 +231,47 @@ #else /* !defined(CONFIG_440) */ +#if defined(CONFIG_405EZ) +#define VECNUM_D0 0 /* DMA channel 0 */ +#define VECNUM_D1 1 /* DMA channel 1 */ +#define VECNUM_D2 2 /* DMA channel 2 */ +#define VECNUM_D3 3 /* DMA channel 3 */ +#define VECNUM_1588 4 /* IEEE 1588 network synchronization */ +#define VECNUM_U0 5 /* UART0 */ +#define VECNUM_U1 6 /* UART1 */ +#define VECNUM_CAN0 7 /* CAN 0 */ +#define VECNUM_CAN1 8 /* CAN 1 */ +#define VECNUM_SPI 9 /* SPI */ +#define VECNUM_IIC0 10 /* I2C */ +#define VECNUM_CHT0 11 /* Chameleon timer high pri interrupt */ +#define VECNUM_CHT1 12 /* Chameleon timer high pri interrupt */ +#define VECNUM_USBH1 13 /* USB Host 1 */ +#define VECNUM_USBH2 14 /* USB Host 2 */ +#define VECNUM_USBDEV 15 /* USB Device */ +#define VECNUM_ETH0 16 /* 10/100 Ethernet interrupt status */ +#define VECNUM_EWU0 17 /* Ethernet wakeup sequence detected */ + +#define VECNUM_MADMAL 18 /* Logical OR of following MadMAL int */ +#define VECNUM_MS 18 /* MAL_SERR_INT */ +#define VECNUM_TXDE 18 /* MAL_TXDE_INT */ +#define VECNUM_RXDE 18 /* MAL_RXDE_INT */ + +#define VECNUM_MTE 19 /* MAL TXEOB */ +#define VECNUM_MTE1 20 /* MAL TXEOB1 */ +#define VECNUM_MRE 21 /* MAL RXEOB */ +#define VECNUM_NAND 22 /* NAND Flash controller */ +#define VECNUM_ADC 23 /* ADC */ +#define VECNUM_DAC 24 /* DAC */ +#define VECNUM_OPB2PLB 25 /* OPB to PLB bridge interrupt */ +#define VECNUM_RESERVED0 26 /* Reserved */ +#define VECNUM_EIR0 27 /* External interrupt 0 */ +#define VECNUM_EIR1 28 /* External interrupt 1 */ +#define VECNUM_EIR2 29 /* External interrupt 2 */ +#define VECNUM_EIR3 30 /* External interrupt 3 */ +#define VECNUM_EIR4 31 /* External interrupt 4 */ + +#else /* !CONFIG_405EZ */ + #define VECNUM_U0 0 /* UART0 */ #define VECNUM_U1 1 /* UART1 */ #define VECNUM_D0 5 /* DMA channel 0 */ @@ -251,6 +292,7 @@ #define VECNUM_EIR4 29 /* External interrupt 4 */ #define VECNUM_EIR5 30 /* External interrupt 5 */ #define VECNUM_EIR6 31 /* External interrupt 6 */ +#endif /* defined(CONFIG_405EZ) */ #endif /* defined(CONFIG_440) */ diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h index ad9fd49..0585962 100644 --- a/include/asm-ppc/processor.h +++ b/include/asm-ppc/processor.h @@ -298,6 +298,10 @@ #define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */ #define SPRN_SPRG2 0x112 /* Special Purpose Register General 2 */ #define SPRN_SPRG3 0x113 /* Special Purpose Register General 3 */ +#define SPRN_SPRG4 0x114 /* Special Purpose Register General 4 */ +#define SPRN_SPRG5 0x115 /* Special Purpose Register General 5 */ +#define SPRN_SPRG6 0x116 /* Special Purpose Register General 6 */ +#define SPRN_SPRG7 0x117 /* Special Purpose Register General 7 */ #define SPRN_SRR0 0x01A /* Save/Restore Register 0 */ #define SPRN_SRR1 0x01B /* Save/Restore Register 1 */ #define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */ @@ -529,6 +533,10 @@ #define SPRG1 SPRN_SPRG1 #define SPRG2 SPRN_SPRG2 #define SPRG3 SPRN_SPRG3 +#define SPRG4 SPRN_SPRG4 +#define SPRG5 SPRN_SPRG5 +#define SPRG6 SPRN_SPRG6 +#define SPRG7 SPRN_SPRG7 #define SRR0 SPRN_SRR0 /* Save and Restore Register 0 */ #define SRR1 SPRN_SRR1 /* Save and Restore Register 1 */ #define SVR SPRN_SVR /* System Version Register */ @@ -731,6 +739,7 @@ #define PVR_405CR_RC 0x40110145 /* same as pc405gp rev e */ #define PVR_405EP_RA 0x51210950 #define PVR_405GPR_RB 0x50910951 +#define PVR_405EZ_RA 0x41511460 #define PVR_440GP_RB 0x40120440 #define PVR_440GP_RC 0x40120481 #define PVR_440EP_RA 0x42221850 diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h index 30b44e3..464f6b5 100644 --- a/include/asm-ppc/u-boot.h +++ b/include/asm-ppc/u-boot.h @@ -83,6 +83,7 @@ typedef struct bd_info { defined(CONFIG_405GP) || \ defined(CONFIG_405CR) || \ defined(CONFIG_405EP) || \ + defined(CONFIG_405EZ) || \ defined(CONFIG_440) unsigned char bi_s_version[4]; /* Version of this structure */ unsigned char bi_r_version[32]; /* Version of the ROM (AMCC) */ @@ -107,7 +108,8 @@ typedef struct bd_info { unsigned char bi_enet3addr[6]; #endif -#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined (CONFIG_440GX) || \ +#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \ + defined(CONFIG_405EZ) || defined(CONFIG_440GX) || \ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) unsigned int bi_opbfreq; /* OPB clock in Hz */ diff --git a/include/ppc405.h b/include/ppc405.h index a49912c..08f10d2 100644 --- a/include/ppc405.h +++ b/include/ppc405.h @@ -117,6 +117,48 @@ /*-----------------------------------------------------------------------------+ | Universal interrupt controller interrupts +-----------------------------------------------------------------------------*/ +#if defined(CONFIG_405EZ) +#define UIC_DMA0 0x80000000 /* DMA chan. 0 */ +#define UIC_DMA1 0x40000000 /* DMA chan. 1 */ +#define UIC_DMA2 0x20000000 /* DMA chan. 2 */ +#define UIC_DMA3 0x10000000 /* DMA chan. 3 */ +#define UIC_1588 0x08000000 /* IEEE 1588 network synchronization */ +#define UIC_UART0 0x04000000 /* UART 0 */ +#define UIC_UART1 0x02000000 /* UART 1 */ +#define UIC_CAN0 0x01000000 /* CAN 0 */ +#define UIC_CAN1 0x00800000 /* CAN 1 */ +#define UIC_SPI 0x00400000 /* SPI */ +#define UIC_IIC 0x00200000 /* IIC */ +#define UIC_CHT0 0x00100000 /* Chameleon timer high pri interrupt */ +#define UIC_CHT1 0x00080000 /* Chameleon timer high pri interrupt */ +#define UIC_USBH1 0x00040000 /* USB Host 1 */ +#define UIC_USBH2 0x00020000 /* USB Host 2 */ +#define UIC_USBDEV 0x00010000 /* USB Device */ +#define UIC_ENET 0x00008000 /* Ethernet interrupt status */ +#define UIC_ENET1 0x00008000 /* dummy define */ +#define UIC_EMAC_WAKE 0x00004000 /* EMAC wake up */ + +#define UIC_MADMAL 0x00002000 /* Logical OR of following MadMAL int */ +#define UIC_MAL_SERR 0x00002000 /* MAL SERR */ +#define UIC_MAL_TXDE 0x00002000 /* MAL TXDE */ +#define UIC_MAL_RXDE 0x00002000 /* MAL RXDE */ + +#define UIC_MAL_TXEOB 0x00001000 /* MAL TXEOB */ +#define UIC_MAL_TXEOB1 0x00000800 /* MAL TXEOB1 */ +#define UIC_MAL_RXEOB 0x00000400 /* MAL RXEOB */ +#define UIC_NAND 0x00000200 /* NAND Flash controller */ +#define UIC_ADC 0x00000100 /* ADC */ +#define UIC_DAC 0x00000080 /* DAC */ +#define UIC_OPB2PLB 0x00000040 /* OPB to PLB bridge interrupt */ +#define UIC_RESERVED0 0x00000020 /* Reserved */ +#define UIC_EXT0 0x00000010 /* External interrupt 0 */ +#define UIC_EXT1 0x00000008 /* External interrupt 1 */ +#define UIC_EXT2 0x00000004 /* External interrupt 2 */ +#define UIC_EXT3 0x00000002 /* External interrupt 3 */ +#define UIC_EXT4 0x00000001 /* External interrupt 4 */ + +#else /* !defined(CONFIG_405EZ) */ + #define UIC_UART0 0x80000000 /* UART 0 */ #define UIC_UART1 0x40000000 /* UART 1 */ #define UIC_IIC 0x20000000 /* IIC */ @@ -144,6 +186,7 @@ #define UIC_EXT4 0x00000004 /* External interrupt 4 */ #define UIC_EXT5 0x00000002 /* External interrupt 5 */ #define UIC_EXT6 0x00000001 /* External interrupt 6 */ +#endif /* defined(CONFIG_405EZ) */ /****************************************************************************** * SDRAM Controller @@ -496,6 +539,325 @@ */ #define VCO_MIN 500 #define VCO_MAX 1000 +#elif defined(CONFIG_405EZ) +/****************************************************************************** + * SDR Registers + ******************************************************************************/ +#define SDR_DCR_BASE 0x0E +#define sdrcfga (SDR_DCR_BASE+0x0) /* ADDR */ +#define sdrcfgd (SDR_DCR_BASE+0x1) /* Data */ + +#define mtsdr(reg, data) mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data) +#define mfsdr(reg, data) mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd) + +#define sdrnand0 0x4000 +#define sdrultra0 0x4040 +#define sdrultra1 0x4050 +#define sdricintstat 0x4510 + +#define SDR_NAND0_NDEN 0x80000000 + +#define SDR_ULTRA0_NDGPIOBP 0x80000000 +#define SDR_ULTRA0_CSN_MASK 0x78000000 +#define SDR_ULTRA0_CSNSEL0 0x40000000 +#define SDR_ULTRA0_CSNSEL1 0x20000000 +#define SDR_ULTRA0_CSNSEL2 0x10000000 +#define SDR_ULTRA0_CSNSEL3 0x08000000 + +#define SDR_ULTRA1_LEDNENABLE 0x40000000 + +#define SDR_ICRX_STAT 0x80000000 +#define SDR_ICTX0_STAT 0x40000000 +#define SDR_ICTX1_STAT 0x20000000 + +/****************************************************************************** + * Control + ******************************************************************************/ +#define CNTRL_DCR_BASE 0x0C +#define cprcfga (CNTRL_DCR_BASE+0x0) /* CPR addr reg */ +#define cprcfgd (CNTRL_DCR_BASE+0x1) /* CPR data reg */ + +/* CPR Registers */ +#define cprclkupd 0x020 /* CPR_CLKUPD */ +#define cprpllc 0x040 /* CPR_PLLC */ +#define cprplld 0x060 /* CPR_PLLD */ +#define cprprimad 0x080 /* CPR_PRIMAD */ +#define cprperd0 0x0e0 /* CPR_PERD0 */ +#define cprperd1 0x0e1 /* CPR_PERD1 */ +#define cprperc0 0x180 /* CPR_PERC0 */ +#define cprmisc0 0x181 /* CPR_MISC0 */ +#define cprmisc1 0x182 /* CPR_MISC1 */ + +/* + * Macro for accessing the indirect CPR register + */ +#define mtcpr(reg, data) mtdcr(cprcfga,reg);mtdcr(cprcfgd,data) +#define mfcpr(reg, data) mtdcr(cprcfga,reg);data = mfdcr(cprcfgd) + +#define CPR_CLKUPD_ENPLLCH_EN 0x40000000 /* Enable CPR PLL Changes */ +#define CPR_CLKUPD_ENDVCH_EN 0x20000000 /* Enable CPR Sys. Div. Changes */ +#define CPR_PERD0_SPIDV_MASK 0x000F0000 /* SPI Clock Divider */ + +#define PLLD_FBDV_MASK 0x1F000000 /* PLL feedback divider value */ +#define PLLD_FWDVA_MASK 0x000F0000 /* PLL forward divider A value */ +#define PLLD_FWDVB_MASK 0x00000700 /* PLL forward divider B value */ + +#define PRIMAD_CPUDV_MASK 0x0F000000 /* CPU Clock Divisor Mask */ +#define PRIMAD_PLBDV_MASK 0x000F0000 /* PLB Clock Divisor Mask */ +#define PRIMAD_OPBDV_MASK 0x00000F00 /* OPB Clock Divisor Mask */ +#define PRIMAD_EBCDV_MASK 0x0000000F /* EBC Clock Divisor Mask */ + +#define PERD0_PWMDV_MASK 0xFF000000 /* PWM Divider Mask */ +#define PERD0_SPIDV_MASK 0x000F0000 /* SPI Divider Mask */ +#define PERD0_U0DV_MASK 0x0000FF00 /* UART 0 Divider Mask */ +#define PERD0_U1DV_MASK 0x000000FF /* UART 1 Divider Mask */ + +#if 0 /* Deprecated */ +#define CNTRL_DCR_BASE 0x0f0 +#define cpc0_pllmr0 (CNTRL_DCR_BASE+0x0) /* PLL mode register 0 */ +#define cpc0_boot (CNTRL_DCR_BASE+0x1) /* Clock status register */ +#define cpc0_epctl (CNTRL_DCR_BASE+0x3) /* EMAC to PHY control register */ +#define cpc0_pllmr1 (CNTRL_DCR_BASE+0x4) /* PLL mode register 1 */ +#define cpc0_ucr (CNTRL_DCR_BASE+0x5) /* UART control register */ +#define cpc0_pci (CNTRL_DCR_BASE+0x9) /* PCI control register */ + +#define CPC0_PLLMR0 (CNTRL_DCR_BASE+0x0) /* PLL mode 0 register */ +#define CPC0_BOOT (CNTRL_DCR_BASE+0x1) /* Chip Clock Status register */ +#define CPC0_CR1 (CNTRL_DCR_BASE+0x2) /* Chip Control 1 register */ +#define CPC0_EPRCSR (CNTRL_DCR_BASE+0x3) /* EMAC PHY Rcv Clk Src register*/ +#define CPC0_PLLMR1 (CNTRL_DCR_BASE+0x4) /* PLL mode 1 register */ +#define CPC0_UCR (CNTRL_DCR_BASE+0x5) /* UART Control register */ +#define CPC0_SRR (CNTRL_DCR_BASE+0x6) /* Soft Reset register */ +#define CPC0_JTAGID (CNTRL_DCR_BASE+0x7) /* JTAG ID register */ +#define CPC0_SPARE (CNTRL_DCR_BASE+0x8) /* Spare DCR */ +#define CPC0_PCI (CNTRL_DCR_BASE+0x9) /* PCI Control register */ + +/* Bit definitions */ +#define PLLMR0_CPU_DIV_MASK 0x00300000 /* CPU clock divider */ +#define PLLMR0_CPU_DIV_BYPASS 0x00000000 +#define PLLMR0_CPU_DIV_2 0x00100000 +#define PLLMR0_CPU_DIV_3 0x00200000 +#define PLLMR0_CPU_DIV_4 0x00300000 + +#define PLLMR0_CPU_TO_PLB_MASK 0x00030000 /* CPU:PLB Frequency Divisor */ +#define PLLMR0_CPU_PLB_DIV_1 0x00000000 +#define PLLMR0_CPU_PLB_DIV_2 0x00010000 +#define PLLMR0_CPU_PLB_DIV_3 0x00020000 +#define PLLMR0_CPU_PLB_DIV_4 0x00030000 + +#define PLLMR0_OPB_TO_PLB_MASK 0x00003000 /* OPB:PLB Frequency Divisor */ +#define PLLMR0_OPB_PLB_DIV_1 0x00000000 +#define PLLMR0_OPB_PLB_DIV_2 0x00001000 +#define PLLMR0_OPB_PLB_DIV_3 0x00002000 +#define PLLMR0_OPB_PLB_DIV_4 0x00003000 + +#define PLLMR0_EXB_TO_PLB_MASK 0x00000300 /* External Bus:PLB Divisor */ +#define PLLMR0_EXB_PLB_DIV_2 0x00000000 +#define PLLMR0_EXB_PLB_DIV_3 0x00000100 +#define PLLMR0_EXB_PLB_DIV_4 0x00000200 +#define PLLMR0_EXB_PLB_DIV_5 0x00000300 + +#define PLLMR0_MAL_TO_PLB_MASK 0x00000030 /* MAL:PLB Divisor */ +#define PLLMR0_MAL_PLB_DIV_1 0x00000000 +#define PLLMR0_MAL_PLB_DIV_2 0x00000010 +#define PLLMR0_MAL_PLB_DIV_3 0x00000020 +#define PLLMR0_MAL_PLB_DIV_4 0x00000030 + +#define PLLMR0_PCI_TO_PLB_MASK 0x00000003 /* PCI:PLB Frequency Divisor */ +#define PLLMR0_PCI_PLB_DIV_1 0x00000000 +#define PLLMR0_PCI_PLB_DIV_2 0x00000001 +#define PLLMR0_PCI_PLB_DIV_3 0x00000002 +#define PLLMR0_PCI_PLB_DIV_4 0x00000003 + +#define PLLMR1_SSCS_MASK 0x80000000 /* Select system clock source */ +#define PLLMR1_PLLR_MASK 0x40000000 /* PLL reset */ +#define PLLMR1_FBMUL_MASK 0x00F00000 /* PLL feedback multiplier value */ +#define PLLMR1_FBMUL_DIV_16 0x00000000 +#define PLLMR1_FBMUL_DIV_1 0x00100000 +#define PLLMR1_FBMUL_DIV_2 0x00200000 +#define PLLMR1_FBMUL_DIV_3 0x00300000 +#define PLLMR1_FBMUL_DIV_4 0x00400000 +#define PLLMR1_FBMUL_DIV_5 0x00500000 +#define PLLMR1_FBMUL_DIV_6 0x00600000 +#define PLLMR1_FBMUL_DIV_7 0x00700000 +#define PLLMR1_FBMUL_DIV_8 0x00800000 +#define PLLMR1_FBMUL_DIV_9 0x00900000 +#define PLLMR1_FBMUL_DIV_10 0x00A00000 +#define PLLMR1_FBMUL_DIV_11 0x00B00000 +#define PLLMR1_FBMUL_DIV_12 0x00C00000 +#define PLLMR1_FBMUL_DIV_13 0x00D00000 +#define PLLMR1_FBMUL_DIV_14 0x00E00000 +#define PLLMR1_FBMUL_DIV_15 0x00F00000 + +#define PLLMR1_FWDVA_MASK 0x00070000 /* PLL forward divider A value */ +#define PLLMR1_FWDVA_DIV_8 0x00000000 +#define PLLMR1_FWDVA_DIV_7 0x00010000 +#define PLLMR1_FWDVA_DIV_6 0x00020000 +#define PLLMR1_FWDVA_DIV_5 0x00030000 +#define PLLMR1_FWDVA_DIV_4 0x00040000 +#define PLLMR1_FWDVA_DIV_3 0x00050000 +#define PLLMR1_FWDVA_DIV_2 0x00060000 +#define PLLMR1_FWDVA_DIV_1 0x00070000 +#define PLLMR1_FWDVB_MASK 0x00007000 /* PLL forward divider B value */ +#define PLLMR1_TUNING_MASK 0x000003FF /* PLL tune bits */ + +/* Defines for CPC0_EPRCSR register */ +#define CPC0_EPRCSR_E0NFE 0x80000000 +#define CPC0_EPRCSR_E1NFE 0x40000000 +#define CPC0_EPRCSR_E1RPP 0x00000080 +#define CPC0_EPRCSR_E0RPP 0x00000040 +#define CPC0_EPRCSR_E1ERP 0x00000020 +#define CPC0_EPRCSR_E0ERP 0x00000010 +#define CPC0_EPRCSR_E1PCI 0x00000002 +#define CPC0_EPRCSR_E0PCI 0x00000001 + +/* Defines for CPC0_BOOR Register */ +#define CPC0_BOOT_SEP 0x00000002 /* serial EEPROM present */ + +/* Defines for CPC0_PLLMR1 Register fields */ +#define PLL_ACTIVE 0x80000000 +#define CPC0_PLLMR1_SSCS 0x80000000 +#define PLL_RESET 0x40000000 +#define CPC0_PLLMR1_PLLR 0x40000000 + /* Feedback multiplier */ +#define PLL_FBKDIV 0x00F00000 +#define CPC0_PLLMR1_FBDV 0x00F00000 +#define PLL_FBKDIV_16 0x00000000 +#define PLL_FBKDIV_1 0x00100000 +#define PLL_FBKDIV_2 0x00200000 +#define PLL_FBKDIV_3 0x00300000 +#define PLL_FBKDIV_4 0x00400000 +#define PLL_FBKDIV_5 0x00500000 +#define PLL_FBKDIV_6 0x00600000 +#define PLL_FBKDIV_7 0x00700000 +#define PLL_FBKDIV_8 0x00800000 +#define PLL_FBKDIV_9 0x00900000 +#define PLL_FBKDIV_10 0x00A00000 +#define PLL_FBKDIV_11 0x00B00000 +#define PLL_FBKDIV_12 0x00C00000 +#define PLL_FBKDIV_13 0x00D00000 +#define PLL_FBKDIV_14 0x00E00000 +#define PLL_FBKDIV_15 0x00F00000 + /* Forward A divisor */ +#define PLL_FWDDIVA 0x00070000 +#define CPC0_PLLMR1_FWDVA 0x00070000 +#define PLL_FWDDIVA_8 0x00000000 +#define PLL_FWDDIVA_7 0x00010000 +#define PLL_FWDDIVA_6 0x00020000 +#define PLL_FWDDIVA_5 0x00030000 +#define PLL_FWDDIVA_4 0x00040000 +#define PLL_FWDDIVA_3 0x00050000 +#define PLL_FWDDIVA_2 0x00060000 +#define PLL_FWDDIVA_1 0x00070000 + /* Forward B divisor */ +#define PLL_FWDDIVB 0x00007000 +#define CPC0_PLLMR1_FWDVB 0x00007000 +#define PLL_FWDDIVB_8 0x00000000 +#define PLL_FWDDIVB_7 0x00001000 +#define PLL_FWDDIVB_6 0x00002000 +#define PLL_FWDDIVB_5 0x00003000 +#define PLL_FWDDIVB_4 0x00004000 +#define PLL_FWDDIVB_3 0x00005000 +#define PLL_FWDDIVB_2 0x00006000 +#define PLL_FWDDIVB_1 0x00007000 + /* PLL tune bits */ +#define PLL_TUNE_MASK 0x000003FF +#define PLL_TUNE_2_M_3 0x00000133 /* 2 <= M <= 3 */ +#define PLL_TUNE_4_M_6 0x00000134 /* 3 < M <= 6 */ +#define PLL_TUNE_7_M_10 0x00000138 /* 6 < M <= 10 */ +#define PLL_TUNE_11_M_14 0x0000013C /* 10 < M <= 14 */ +#define PLL_TUNE_15_M_40 0x0000023E /* 14 < M <= 40 */ +#define PLL_TUNE_VCO_LOW 0x00000000 /* 500MHz <= VCO <= 800MHz */ +#define PLL_TUNE_VCO_HI 0x00000080 /* 800MHz < VCO <= 1000MHz */ + +/* Defines for CPC0_PLLMR0 Register fields */ + /* CPU divisor */ +#define PLL_CPUDIV 0x00300000 +#define CPC0_PLLMR0_CCDV 0x00300000 +#define PLL_CPUDIV_1 0x00000000 +#define PLL_CPUDIV_2 0x00100000 +#define PLL_CPUDIV_3 0x00200000 +#define PLL_CPUDIV_4 0x00300000 + /* PLB divisor */ +#define PLL_PLBDIV 0x00030000 +#define CPC0_PLLMR0_CBDV 0x00030000 +#define PLL_PLBDIV_1 0x00000000 +#define PLL_PLBDIV_2 0x00010000 +#define PLL_PLBDIV_3 0x00020000 +#define PLL_PLBDIV_4 0x00030000 + /* OPB divisor */ +#define PLL_OPBDIV 0x00003000 +#define CPC0_PLLMR0_OPDV 0x00003000 +#define PLL_OPBDIV_1 0x00000000 +#define PLL_OPBDIV_2 0x00001000 +#define PLL_OPBDIV_3 0x00002000 +#define PLL_OPBDIV_4 0x00003000 + /* EBC divisor */ +#define PLL_EXTBUSDIV 0x00000300 +#define CPC0_PLLMR0_EPDV 0x00000300 +#define PLL_EXTBUSDIV_2 0x00000000 +#define PLL_EXTBUSDIV_3 0x00000100 +#define PLL_EXTBUSDIV_4 0x00000200 +#define PLL_EXTBUSDIV_5 0x00000300 + /* MAL divisor */ +#define PLL_MALDIV 0x00000030 +#define CPC0_PLLMR0_MPDV 0x00000030 +#define PLL_MALDIV_1 0x00000000 +#define PLL_MALDIV_2 0x00000010 +#define PLL_MALDIV_3 0x00000020 +#define PLL_MALDIV_4 0x00000030 + /* PCI divisor */ +#define PLL_PCIDIV 0x00000003 +#define CPC0_PLLMR0_PPFD 0x00000003 +#define PLL_PCIDIV_1 0x00000000 +#define PLL_PCIDIV_2 0x00000001 +#define PLL_PCIDIV_3 0x00000002 +#define PLL_PCIDIV_4 0x00000003 + +/* + *------------------------------------------------------------------------------- + * PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI, + * assuming a 33.3MHz input clock to the 405EP. + *------------------------------------------------------------------------------- + */ +#define PLLMR0_266_133_66 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \ + PLL_MALDIV_1 | PLL_PCIDIV_4) +#define PLLMR1_266_133_66 (PLL_FBKDIV_8 | \ + PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) +#define PLLMR0_133_66_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_1 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \ + PLL_MALDIV_1 | PLL_PCIDIV_4) +#define PLLMR1_133_66_66_33 (PLL_FBKDIV_4 | \ + PLL_FWDDIVA_6 | PLL_FWDDIVB_6 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) +#define PLLMR0_200_100_50_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \ + PLL_MALDIV_1 | PLL_PCIDIV_4) +#define PLLMR1_200_100_50_33 (PLL_FBKDIV_6 | \ + PLL_FWDDIVA_4 | PLL_FWDDIVB_4 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) +#define PLLMR0_266_133_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \ + PLL_MALDIV_1 | PLL_PCIDIV_4) +#define PLLMR1_266_133_66_33 (PLL_FBKDIV_8 | \ + PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) +#define PLLMR0_266_66_33_33 (PLL_CPUDIV_1 | PLL_PLBDIV_4 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \ + PLL_MALDIV_1 | PLL_PCIDIV_2) +#define PLLMR1_266_66_33_33 (PLL_FBKDIV_8 | \ + PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) + +/* + * PLL Voltage Controlled Oscillator (VCO) definitions + * Maximum and minimum values (in MHz) for correct PLL operation. + */ +#define VCO_MIN 500 +#define VCO_MAX 1000 +#endif /* #if 0 */ #else /* #ifdef CONFIG_405EP */ /****************************************************************************** * Control @@ -578,6 +940,121 @@ /****************************************************************************** * Memory Access Layer ******************************************************************************/ +#if defined(CONFIG_405EZ) +#define MAL_DCR_BASE 0x380 +#define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */ +#define malesr (MAL_DCR_BASE+0x01) /* Err Status reg (Read/Clear)*/ +#define malier (MAL_DCR_BASE+0x02) /* Interrupt enable reg */ +#define maldbr (MAL_DCR_BASE+0x03) /* Mal Debug reg (Read only) */ +#define maltxcasr (MAL_DCR_BASE+0x04) /* TX Channel active reg (set)*/ +#define maltxcarr (MAL_DCR_BASE+0x05) /* TX Channel active reg (Reset) */ +#define maltxeobisr (MAL_DCR_BASE+0x06) /* TX End of buffer int status reg */ +#define maltxdeir (MAL_DCR_BASE+0x07) /* TX Descr. Error Int reg */ +/* 0x08-0x0F Reserved */ +#define malrxcasr (MAL_DCR_BASE+0x10) /* RX Channel active reg (set)*/ +#define malrxcarr (MAL_DCR_BASE+0x11) /* RX Channel active reg (Reset) */ +#define malrxeobisr (MAL_DCR_BASE+0x12) /* RX End of buffer int status reg */ +#define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */ +/* 0x14-0x1F Reserved */ +#define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table ptr reg */ +#define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table ptr reg */ +#define maltxctp2r (MAL_DCR_BASE+0x22) /* TX 2 Channel table ptr reg */ +#define maltxctp3r (MAL_DCR_BASE+0x23) /* TX 3 Channel table ptr reg */ +#define maltxctp4r (MAL_DCR_BASE+0x24) /* TX 4 Channel table ptr reg */ +#define maltxctp5r (MAL_DCR_BASE+0x25) /* TX 5 Channel table ptr reg */ +#define maltxctp6r (MAL_DCR_BASE+0x26) /* TX 6 Channel table ptr reg */ +#define maltxctp7r (MAL_DCR_BASE+0x27) /* TX 7 Channel table ptr reg */ +#define maltxctp8r (MAL_DCR_BASE+0x28) /* TX 8 Channel table ptr reg */ +#define maltxctp9r (MAL_DCR_BASE+0x29) /* TX 9 Channel table ptr reg */ +#define maltxctp10r (MAL_DCR_BASE+0x2A) /* TX 10 Channel table ptr reg */ +#define maltxctp11r (MAL_DCR_BASE+0x2B) /* TX 11 Channel table ptr reg */ +#define maltxctp12r (MAL_DCR_BASE+0x2C) /* TX 12 Channel table ptr reg */ +#define maltxctp13r (MAL_DCR_BASE+0x2D) /* TX 13 Channel table ptr reg */ +#define maltxctp14r (MAL_DCR_BASE+0x2E) /* TX 14 Channel table ptr reg */ +#define maltxctp15r (MAL_DCR_BASE+0x2F) /* TX 15 Channel table ptr reg */ +#define maltxctp16r (MAL_DCR_BASE+0x30) /* TX 16 Channel table ptr reg */ +#define maltxctp17r (MAL_DCR_BASE+0x31) /* TX 17 Channel table ptr reg */ +#define maltxctp18r (MAL_DCR_BASE+0x32) /* TX 18 Channel table ptr reg */ +#define maltxctp19r (MAL_DCR_BASE+0x33) /* TX 19 Channel table ptr reg */ +#define maltxctp20r (MAL_DCR_BASE+0x34) /* TX 20 Channel table ptr reg */ +#define maltxctp21r (MAL_DCR_BASE+0x35) /* TX 21 Channel table ptr reg */ +#define maltxctp22r (MAL_DCR_BASE+0x36) /* TX 22 Channel table ptr reg */ +#define maltxctp23r (MAL_DCR_BASE+0x37) /* TX 23 Channel table ptr reg */ +#define maltxctp24r (MAL_DCR_BASE+0x38) /* TX 24 Channel table ptr reg */ +#define maltxctp25r (MAL_DCR_BASE+0x39) /* TX 25 Channel table ptr reg */ +#define maltxctp26r (MAL_DCR_BASE+0x3A) /* TX 26 Channel table ptr reg */ +#define maltxctp27r (MAL_DCR_BASE+0x3B) /* TX 27 Channel table ptr reg */ +#define maltxctp28r (MAL_DCR_BASE+0x3C) /* TX 28 Channel table ptr reg */ +#define maltxctp29r (MAL_DCR_BASE+0x3D) /* TX 29 Channel table ptr reg */ +#define maltxctp30r (MAL_DCR_BASE+0x3E) /* TX 30 Channel table ptr reg */ +#define maltxctp31r (MAL_DCR_BASE+0x3F) /* TX 31 Channel table ptr reg */ +#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table ptr reg */ +#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table ptr reg */ +#define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 2 Channel table ptr reg */ +#define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 3 Channel table ptr reg */ +#define malrxctp4r (MAL_DCR_BASE+0x44) /* RX 4 Channel table ptr reg */ +#define malrxctp5r (MAL_DCR_BASE+0x45) /* RX 5 Channel table ptr reg */ +#define malrxctp6r (MAL_DCR_BASE+0x46) /* RX 6 Channel table ptr reg */ +#define malrxctp7r (MAL_DCR_BASE+0x47) /* RX 7 Channel table ptr reg */ +#define malrxctp8r (MAL_DCR_BASE+0x48) /* RX 8 Channel table ptr reg */ +#define malrxctp9r (MAL_DCR_BASE+0x49) /* RX 9 Channel table ptr reg */ +#define malrxctp10r (MAL_DCR_BASE+0x4A) /* RX 10 Channel table ptr reg */ +#define malrxctp11r (MAL_DCR_BASE+0x4B) /* RX 11 Channel table ptr reg */ +#define malrxctp12r (MAL_DCR_BASE+0x4C) /* RX 12 Channel table ptr reg */ +#define malrxctp13r (MAL_DCR_BASE+0x4D) /* RX 13 Channel table ptr reg */ +#define malrxctp14r (MAL_DCR_BASE+0x4E) /* RX 14 Channel table ptr reg */ +#define malrxctp15r (MAL_DCR_BASE+0x4F) /* RX 15 Channel table ptr reg */ +#define malrxctp16r (MAL_DCR_BASE+0x50) /* RX 16 Channel table ptr reg */ +#define malrxctp17r (MAL_DCR_BASE+0x51) /* RX 17 Channel table ptr reg */ +#define malrxctp18r (MAL_DCR_BASE+0x52) /* RX 18 Channel table ptr reg */ +#define malrxctp19r (MAL_DCR_BASE+0x53) /* RX 19 Channel table ptr reg */ +#define malrxctp20r (MAL_DCR_BASE+0x54) /* RX 20 Channel table ptr reg */ +#define malrxctp21r (MAL_DCR_BASE+0x55) /* RX 21 Channel table ptr reg */ +#define malrxctp22r (MAL_DCR_BASE+0x56) /* RX 22 Channel table ptr reg */ +#define malrxctp23r (MAL_DCR_BASE+0x57) /* RX 23 Channel table ptr reg */ +#define malrxctp24r (MAL_DCR_BASE+0x58) /* RX 24 Channel table ptr reg */ +#define malrxctp25r (MAL_DCR_BASE+0x59) /* RX 25 Channel table ptr reg */ +#define malrxctp26r (MAL_DCR_BASE+0x5A) /* RX 26 Channel table ptr reg */ +#define malrxctp27r (MAL_DCR_BASE+0x5B) /* RX 27 Channel table ptr reg */ +#define malrxctp28r (MAL_DCR_BASE+0x5C) /* RX 28 Channel table ptr reg */ +#define malrxctp29r (MAL_DCR_BASE+0x5D) /* RX 29 Channel table ptr reg */ +#define malrxctp30r (MAL_DCR_BASE+0x5E) /* RX 30 Channel table ptr reg */ +#define malrxctp31r (MAL_DCR_BASE+0x5F) /* RX 31 Channel table ptr reg */ +#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */ +#define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */ +#define malrcbs2 (MAL_DCR_BASE+0x62) /* RX 2 Channel buffer size reg */ +#define malrcbs3 (MAL_DCR_BASE+0x63) /* RX 3 Channel buffer size reg */ +#define malrcbs4 (MAL_DCR_BASE+0x64) /* RX 4 Channel buffer size reg */ +#define malrcbs5 (MAL_DCR_BASE+0x65) /* RX 5 Channel buffer size reg */ +#define malrcbs6 (MAL_DCR_BASE+0x66) /* RX 6 Channel buffer size reg */ +#define malrcbs7 (MAL_DCR_BASE+0x67) /* RX 7 Channel buffer size reg */ +#define malrcbs8 (MAL_DCR_BASE+0x68) /* RX 8 Channel buffer size reg */ +#define malrcbs9 (MAL_DCR_BASE+0x69) /* RX 9 Channel buffer size reg */ +#define malrcbs10 (MAL_DCR_BASE+0x6A) /* RX 10 Channel buffer size reg */ +#define malrcbs11 (MAL_DCR_BASE+0x6B) /* RX 11 Channel buffer size reg */ +#define malrcbs12 (MAL_DCR_BASE+0x6C) /* RX 12 Channel buffer size reg */ +#define malrcbs13 (MAL_DCR_BASE+0x6D) /* RX 13 Channel buffer size reg */ +#define malrcbs14 (MAL_DCR_BASE+0x6E) /* RX 14 Channel buffer size reg */ +#define malrcbs15 (MAL_DCR_BASE+0x6F) /* RX 15 Channel buffer size reg */ +#define malrcbs16 (MAL_DCR_BASE+0x70) /* RX 16 Channel buffer size reg */ +#define malrcbs17 (MAL_DCR_BASE+0x71) /* RX 17 Channel buffer size reg */ +#define malrcbs18 (MAL_DCR_BASE+0x72) /* RX 18 Channel buffer size reg */ +#define malrcbs19 (MAL_DCR_BASE+0x73) /* RX 19 Channel buffer size reg */ +#define malrcbs20 (MAL_DCR_BASE+0x74) /* RX 20 Channel buffer size reg */ +#define malrcbs21 (MAL_DCR_BASE+0x75) /* RX 21 Channel buffer size reg */ +#define malrcbs22 (MAL_DCR_BASE+0x76) /* RX 22 Channel buffer size reg */ +#define malrcbs23 (MAL_DCR_BASE+0x77) /* RX 23 Channel buffer size reg */ +#define malrcbs24 (MAL_DCR_BASE+0x78) /* RX 24 Channel buffer size reg */ +#define malrcbs25 (MAL_DCR_BASE+0x79) /* RX 25 Channel buffer size reg */ +#define malrcbs26 (MAL_DCR_BASE+0x7A) /* RX 26 Channel buffer size reg */ +#define malrcbs27 (MAL_DCR_BASE+0x7B) /* RX 27 Channel buffer size reg */ +#define malrcbs28 (MAL_DCR_BASE+0x7C) /* RX 28 Channel buffer size reg */ +#define malrcbs29 (MAL_DCR_BASE+0x7D) /* RX 29 Channel buffer size reg */ +#define malrcbs30 (MAL_DCR_BASE+0x7E) /* RX 30 Channel buffer size reg */ +#define malrcbs31 (MAL_DCR_BASE+0x7F) /* RX 31 Channel buffer size reg */ + +#else /* !defined(CONFIG_405EZ) */ + #define MAL_DCR_BASE 0x180 #define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */ #define malesr (MAL_DCR_BASE+0x01) /* Error Status reg (Read/Clear) */ @@ -598,6 +1075,7 @@ #define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */ #define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */ #define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */ +#endif /* defined(CONFIG_405EZ) */ /*----------------------------------------------------------------------------- | IIC Register Offsets @@ -635,15 +1113,76 @@ /****************************************************************************** * On Chip Memory ******************************************************************************/ +#if defined(CONFIG_405EZ) +#define OCM_DCR_BASE 0x020 +#define ocmplb3cr1 (OCM_DCR_BASE+0x00) /* OCM PLB3 Bank 1 Config Reg */ +#define ocmplb3cr2 (OCM_DCR_BASE+0x01) /* OCM PLB3 Bank 2 Config Reg */ +#define ocmplb3bear (OCM_DCR_BASE+0x02) /* OCM PLB3 Bus Error Add Reg */ +#define ocmplb3besr0 (OCM_DCR_BASE+0x03) /* OCM PLB3 Bus Error Stat Reg 0 */ +#define ocmplb3besr1 (OCM_DCR_BASE+0x04) /* OCM PLB3 Bus Error Stat Reg 1 */ +#define ocmcid (OCM_DCR_BASE+0x05) /* OCM Core ID */ +#define ocmrevid (OCM_DCR_BASE+0x06) /* OCM Revision ID */ +#define ocmplb3dpc (OCM_DCR_BASE+0x07) /* OCM PLB3 Data Parity Check */ +#define ocmdscr1 (OCM_DCR_BASE+0x08) /* OCM D-side Bank 1 Config Reg */ +#define ocmdscr2 (OCM_DCR_BASE+0x09) /* OCM D-side Bank 2 Config Reg */ +#define ocmiscr1 (OCM_DCR_BASE+0x0A) /* OCM I-side Bank 1 Config Reg */ +#define ocmiscr2 (OCM_DCR_BASE+0x0B) /* OCM I-side Bank 2 Config Reg */ +#define ocmdsisdpc (OCM_DCR_BASE+0x0C) /* OCM D-side/I-side Data Par Chk*/ +#define ocmdsisbear (OCM_DCR_BASE+0x0D) /* OCM D-side/I-side Bus Err Addr*/ +#define ocmdsisbesr (OCM_DCR_BASE+0x0E) /* OCM D-side/I-side Bus Err Stat*/ +#else #define OCM_DCR_BASE 0x018 #define ocmisarc (OCM_DCR_BASE+0x00) /* OCM I-side address compare reg */ #define ocmiscntl (OCM_DCR_BASE+0x01) /* OCM I-side control reg */ #define ocmdsarc (OCM_DCR_BASE+0x02) /* OCM D-side address compare reg */ #define ocmdscntl (OCM_DCR_BASE+0x03) /* OCM D-side control reg */ +#endif /* CONFIG_405EZ */ /****************************************************************************** * GPIO macro register defines ******************************************************************************/ +#if defined(CONFIG_405EZ) +/* Only the 405EZ has 2 GPIOs */ +#define GPIO_BASE 0xEF600700 +#define GPIO0_OR (GPIO_BASE+0x0) +#define GPIO0_TCR (GPIO_BASE+0x4) +#define GPIO0_OSRL (GPIO_BASE+0x8) +#define GPIO0_OSRH (GPIO_BASE+0xC) +#define GPIO0_TSRL (GPIO_BASE+0x10) +#define GPIO0_TSRH (GPIO_BASE+0x14) +#define GPIO0_ODR (GPIO_BASE+0x18) +#define GPIO0_IR (GPIO_BASE+0x1C) +#define GPIO0_RR1 (GPIO_BASE+0x20) +#define GPIO0_RR2 (GPIO_BASE+0x24) +#define GPIO0_RR3 (GPIO_BASE+0x28) +#define GPIO0_ISR1L (GPIO_BASE+0x30) +#define GPIO0_ISR1H (GPIO_BASE+0x34) +#define GPIO0_ISR2L (GPIO_BASE+0x38) +#define GPIO0_ISR2H (GPIO_BASE+0x3C) +#define GPIO0_ISR3L (GPIO_BASE+0x40) +#define GPIO0_ISR3H (GPIO_BASE+0x44) + +#define GPIO1_BASE 0xEF600800 +#define GPIO1_OR (GPIO1_BASE+0x0) +#define GPIO1_TCR (GPIO1_BASE+0x4) +#define GPIO1_OSRL (GPIO1_BASE+0x8) +#define GPIO1_OSRH (GPIO1_BASE+0xC) +#define GPIO1_TSRL (GPIO1_BASE+0x10) +#define GPIO1_TSRH (GPIO1_BASE+0x14) +#define GPIO1_ODR (GPIO1_BASE+0x18) +#define GPIO1_IR (GPIO1_BASE+0x1C) +#define GPIO1_RR1 (GPIO1_BASE+0x20) +#define GPIO1_RR2 (GPIO1_BASE+0x24) +#define GPIO1_RR3 (GPIO1_BASE+0x28) +#define GPIO1_ISR1L (GPIO1_BASE+0x30) +#define GPIO1_ISR1H (GPIO1_BASE+0x34) +#define GPIO1_ISR2L (GPIO1_BASE+0x38) +#define GPIO1_ISR2H (GPIO1_BASE+0x3C) +#define GPIO1_ISR3L (GPIO1_BASE+0x40) +#define GPIO1_ISR3H (GPIO1_BASE+0x44) + +#else /* !405EZ */ + #define GPIO_BASE 0xEF600700 #define GPIO0_OR (GPIO_BASE+0x0) #define GPIO0_TCR (GPIO_BASE+0x4) @@ -660,6 +1199,7 @@ #define GPIO0_ISR2H (GPIO_BASE+0x38) #define GPIO0_ISR2L (GPIO_BASE+0x3C) +#endif /* CONFIG_405EZ */ /* * Macro for accessing the indirect EBC register diff --git a/include/ppc4xx_enet.h b/include/ppc4xx_enet.h index 43c5ca4..3d8ca09 100644 --- a/include/ppc4xx_enet.h +++ b/include/ppc4xx_enet.h @@ -130,13 +130,13 @@ typedef struct emac_4xx_hw_st { #if defined(CONFIG_440GX) -#define EMAC_NUM_DEV 4 +#define EMAC_NUM_DEV 4 #elif (defined(CONFIG_440) || defined(CONFIG_405EP)) && \ defined(CONFIG_NET_MULTI) && \ !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) -#define EMAC_NUM_DEV 2 +#define EMAC_NUM_DEV 2 #else -#define EMAC_NUM_DEV 1 +#define EMAC_NUM_DEV 1 #endif #ifdef CONFIG_IBM_EMAC4_V4 /* EMAC4 V4 changed bit setting */ @@ -153,16 +153,16 @@ typedef struct emac_4xx_hw_st { /*ZMII Bridge Register addresses */ #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) -#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0D00) +#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0D00) #else -#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0780) +#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0780) #endif -#define ZMII_FER (ZMII_BASE) -#define ZMII_SSR (ZMII_BASE + 4) -#define ZMII_SMIISR (ZMII_BASE + 8) +#define ZMII_FER (ZMII_BASE) +#define ZMII_SSR (ZMII_BASE + 4) +#define ZMII_SMIISR (ZMII_BASE + 8) -#define ZMII_RMII 0x22000000 -#define ZMII_MDI0 0x80000000 +#define ZMII_RMII 0x22000000 +#define ZMII_MDI0 0x80000000 /* ZMII FER Register Bit Definitions */ #define ZMII_FER_DIS (0x0) @@ -299,49 +299,41 @@ typedef struct emac_4xx_hw_st { #if defined(CONFIG_440) #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) -#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0E00) +#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0E00) #else -#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0800) +#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0800) #endif #else -#define EMAC_BASE 0xEF600800 +#if defined(CONFIG_405EZ) +#define EMAC_BASE 0xEF600900 +#else +#define EMAC_BASE 0xEF600800 +#endif #endif -#define EMAC_M0 (EMAC_BASE) -#define EMAC_M1 (EMAC_BASE + 4) -#define EMAC_TXM0 (EMAC_BASE + 8) -#define EMAC_TXM1 (EMAC_BASE + 12) -#define EMAC_RXM (EMAC_BASE + 16) -#define EMAC_ISR (EMAC_BASE + 20) -#define EMAC_IER (EMAC_BASE + 24) -#define EMAC_IAH (EMAC_BASE + 28) -#define EMAC_IAL (EMAC_BASE + 32) -#define EMAC_VLAN_TPID_REG (EMAC_BASE + 36) -#define EMAC_VLAN_TCI_REG (EMAC_BASE + 40) +#define EMAC_M0 (EMAC_BASE) +#define EMAC_M1 (EMAC_BASE + 4) +#define EMAC_TXM0 (EMAC_BASE + 8) +#define EMAC_TXM1 (EMAC_BASE + 12) +#define EMAC_RXM (EMAC_BASE + 16) +#define EMAC_ISR (EMAC_BASE + 20) +#define EMAC_IER (EMAC_BASE + 24) +#define EMAC_IAH (EMAC_BASE + 28) +#define EMAC_IAL (EMAC_BASE + 32) #define EMAC_PAUSE_TIME_REG (EMAC_BASE + 44) -#define EMAC_IND_HASH_1 (EMAC_BASE + 48) -#define EMAC_IND_HASH_2 (EMAC_BASE + 52) -#define EMAC_IND_HASH_3 (EMAC_BASE + 56) -#define EMAC_IND_HASH_4 (EMAC_BASE + 60) -#define EMAC_GRP_HASH_1 (EMAC_BASE + 64) -#define EMAC_GRP_HASH_2 (EMAC_BASE + 68) -#define EMAC_GRP_HASH_3 (EMAC_BASE + 72) -#define EMAC_GRP_HASH_4 (EMAC_BASE + 76) -#define EMAC_LST_SRC_LOW (EMAC_BASE + 80) -#define EMAC_LST_SRC_HI (EMAC_BASE + 84) #define EMAC_I_FRAME_GAP_REG (EMAC_BASE + 88) -#define EMAC_STACR (EMAC_BASE + 92) -#define EMAC_TRTR (EMAC_BASE + 96) -#define EMAC_RX_HI_LO_WMARK (EMAC_BASE + 100) +#define EMAC_STACR (EMAC_BASE + 92) +#define EMAC_TRTR (EMAC_BASE + 96) +#define EMAC_RX_HI_LO_WMARK (EMAC_BASE + 100) /* bit definitions */ /* MODE REG 0 */ -#define EMAC_M0_RXI (0x80000000) -#define EMAC_M0_TXI (0x40000000) -#define EMAC_M0_SRST (0x20000000) -#define EMAC_M0_TXE (0x10000000) -#define EMAC_M0_RXE (0x08000000) -#define EMAC_M0_WKE (0x04000000) +#define EMAC_M0_RXI (0x80000000) +#define EMAC_M0_TXI (0x40000000) +#define EMAC_M0_SRST (0x20000000) +#define EMAC_M0_TXE (0x10000000) +#define EMAC_M0_RXE (0x08000000) +#define EMAC_M0_WKE (0x04000000) /* on 440GX EMAC_MR1 has a different layout! */ #if defined(CONFIG_440GX) || \ @@ -351,23 +343,23 @@ typedef struct emac_4xx_hw_st { #define EMAC_M1_FDE (0x80000000) #define EMAC_M1_ILE (0x40000000) #define EMAC_M1_VLE (0x20000000) -#define EMAC_M1_EIFC (0x10000000) -#define EMAC_M1_APP (0x08000000) -#define EMAC_M1_RSVD (0x06000000) -#define EMAC_M1_IST (0x01000000) -#define EMAC_M1_MF_1000MBPS (0x00800000) /* 0's for 10MBPS */ -#define EMAC_M1_MF_100MBPS (0x00400000) -#define EMAC_M1_RFS_16K (0x00280000) /* ~4k for 512 byte */ -#define EMAC_M1_RFS_8K (0x00200000) /* ~4k for 512 byte */ -#define EMAC_M1_RFS_4K (0x00180000) /* ~4k for 512 byte */ -#define EMAC_M1_RFS_2K (0x00100000) -#define EMAC_M1_RFS_1K (0x00080000) -#define EMAC_M1_TX_FIFO_16K (0x00050000) /* 0's for 512 byte */ -#define EMAC_M1_TX_FIFO_8K (0x00040000) -#define EMAC_M1_TX_FIFO_4K (0x00030000) +#define EMAC_M1_EIFC (0x10000000) +#define EMAC_M1_APP (0x08000000) +#define EMAC_M1_RSVD (0x06000000) +#define EMAC_M1_IST (0x01000000) +#define EMAC_M1_MF_1000MBPS (0x00800000) /* 0's for 10MBPS */ +#define EMAC_M1_MF_100MBPS (0x00400000) +#define EMAC_M1_RFS_16K (0x00280000) /* ~4k for 512 byte */ +#define EMAC_M1_RFS_8K (0x00200000) /* ~4k for 512 byte */ +#define EMAC_M1_RFS_4K (0x00180000) /* ~4k for 512 byte */ +#define EMAC_M1_RFS_2K (0x00100000) +#define EMAC_M1_RFS_1K (0x00080000) +#define EMAC_M1_TX_FIFO_16K (0x00050000) /* 0's for 512 byte */ +#define EMAC_M1_TX_FIFO_8K (0x00040000) +#define EMAC_M1_TX_FIFO_4K (0x00030000) #define EMAC_M1_TX_FIFO_2K (0x00020000) -#define EMAC_M1_TX_FIFO_1K (0x00010000) -#define EMAC_M1_TR_MULTI (0x00008000) /* 0'x for single packet */ +#define EMAC_M1_TX_FIFO_1K (0x00010000) +#define EMAC_M1_TR_MULTI (0x00008000) /* 0'x for single packet */ #define EMAC_M1_MWSW (0x00007000) #define EMAC_M1_JUMBO_ENABLE (0x00000800) #define EMAC_M1_IPPA (0x000007c0) @@ -378,34 +370,34 @@ typedef struct emac_4xx_hw_st { #define EMAC_M1_RSVD1 (0x00000007) #else /* defined(CONFIG_440GX) */ /* EMAC_MR1 is the same on 405GP, 405GPr, 405EP, 440GP, 440EP */ -#define EMAC_M1_FDE 0x80000000 -#define EMAC_M1_ILE 0x40000000 -#define EMAC_M1_VLE 0x20000000 -#define EMAC_M1_EIFC 0x10000000 -#define EMAC_M1_APP 0x08000000 -#define EMAC_M1_AEMI 0x02000000 -#define EMAC_M1_IST 0x01000000 -#define EMAC_M1_MF_1000MBPS 0x00800000 /* 0's for 10MBPS */ -#define EMAC_M1_MF_100MBPS 0x00400000 -#define EMAC_M1_RFS_4K 0x00300000 /* ~4k for 512 byte */ -#define EMAC_M1_RFS_2K 0x00200000 -#define EMAC_M1_RFS_1K 0x00100000 -#define EMAC_M1_TX_FIFO_2K 0x00080000 /* 0's for 512 byte */ -#define EMAC_M1_TX_FIFO_1K 0x00040000 -#define EMAC_M1_TR0_DEPEND 0x00010000 /* 0'x for single packet */ -#define EMAC_M1_TR0_MULTI 0x00008000 -#define EMAC_M1_TR1_DEPEND 0x00004000 -#define EMAC_M1_TR1_MULTI 0x00002000 +#define EMAC_M1_FDE 0x80000000 +#define EMAC_M1_ILE 0x40000000 +#define EMAC_M1_VLE 0x20000000 +#define EMAC_M1_EIFC 0x10000000 +#define EMAC_M1_APP 0x08000000 +#define EMAC_M1_AEMI 0x02000000 +#define EMAC_M1_IST 0x01000000 +#define EMAC_M1_MF_1000MBPS 0x00800000 /* 0's for 10MBPS */ +#define EMAC_M1_MF_100MBPS 0x00400000 +#define EMAC_M1_RFS_4K 0x00300000 /* ~4k for 512 byte */ +#define EMAC_M1_RFS_2K 0x00200000 +#define EMAC_M1_RFS_1K 0x00100000 +#define EMAC_M1_TX_FIFO_2K 0x00080000 /* 0's for 512 byte */ +#define EMAC_M1_TX_FIFO_1K 0x00040000 +#define EMAC_M1_TR0_DEPEND 0x00010000 /* 0'x for single packet */ +#define EMAC_M1_TR0_MULTI 0x00008000 +#define EMAC_M1_TR1_DEPEND 0x00004000 +#define EMAC_M1_TR1_MULTI 0x00002000 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) -#define EMAC_M1_JUMBO_ENABLE 0x00001000 +#define EMAC_M1_JUMBO_ENABLE 0x00001000 #endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */ #endif /* defined(CONFIG_440GX) */ /* Transmit Mode Register 0 */ -#define EMAC_TXM0_GNP0 (0x80000000) -#define EMAC_TXM0_GNP1 (0x40000000) -#define EMAC_TXM0_GNPD (0x20000000) -#define EMAC_TXM0_FC (0x10000000) +#define EMAC_TXM0_GNP0 (0x80000000) +#define EMAC_TXM0_GNP1 (0x40000000) +#define EMAC_TXM0_GNPD (0x20000000) +#define EMAC_TXM0_FC (0x10000000) /* Receive Mode Register */ #define EMAC_RMR_SP (0x80000000) @@ -427,39 +419,38 @@ typedef struct emac_4xx_hw_st { #define EMAC_ISR_PP (0x01000000) #define EMAC_ISR_BP (0x00800000) #define EMAC_ISR_RP (0x00400000) -#define EMAC_ISR_SE (0x00200000) -#define EMAC_ISR_SYE (0x00100000) -#define EMAC_ISR_BFCS (0x00080000) -#define EMAC_ISR_PTLE (0x00040000) -#define EMAC_ISR_ORE (0x00020000) -#define EMAC_ISR_IRE (0x00010000) -#define EMAC_ISR_DBDM (0x00000200) -#define EMAC_ISR_DB0 (0x00000100) -#define EMAC_ISR_SE0 (0x00000080) -#define EMAC_ISR_TE0 (0x00000040) -#define EMAC_ISR_DB1 (0x00000020) -#define EMAC_ISR_SE1 (0x00000010) -#define EMAC_ISR_TE1 (0x00000008) -#define EMAC_ISR_MOS (0x00000002) -#define EMAC_ISR_MOF (0x00000001) - +#define EMAC_ISR_SE (0x00200000) +#define EMAC_ISR_SYE (0x00100000) +#define EMAC_ISR_BFCS (0x00080000) +#define EMAC_ISR_PTLE (0x00040000) +#define EMAC_ISR_ORE (0x00020000) +#define EMAC_ISR_IRE (0x00010000) +#define EMAC_ISR_DBDM (0x00000200) +#define EMAC_ISR_DB0 (0x00000100) +#define EMAC_ISR_SE0 (0x00000080) +#define EMAC_ISR_TE0 (0x00000040) +#define EMAC_ISR_DB1 (0x00000020) +#define EMAC_ISR_SE1 (0x00000010) +#define EMAC_ISR_TE1 (0x00000008) +#define EMAC_ISR_MOS (0x00000002) +#define EMAC_ISR_MOF (0x00000001) /* STA CONTROL REG */ -#define EMAC_STACR_OC (0x00008000) -#define EMAC_STACR_PHYE (0x00004000) +#define EMAC_STACR_OC (0x00008000) +#define EMAC_STACR_PHYE (0x00004000) #ifdef CONFIG_IBM_EMAC4_V4 /* EMAC4 V4 changed bit setting */ -#define EMAC_STACR_INDIRECT_MODE (0x00002000) -#define EMAC_STACR_WRITE (0x00000800) /* $BUC */ -#define EMAC_STACR_READ (0x00001000) /* $BUC */ -#define EMAC_STACR_OP_MASK (0x00001800) -#define EMAC_STACR_MDIO_ADDR (0x00000000) -#define EMAC_STACR_MDIO_WRITE (0x00000800) -#define EMAC_STACR_MDIO_READ (0x00001800) -#define EMAC_STACR_MDIO_READ_INC (0x00001000) +#define EMAC_STACR_INDIRECT_MODE (0x00002000) +#define EMAC_STACR_WRITE (0x00000800) /* $BUC */ +#define EMAC_STACR_READ (0x00001000) /* $BUC */ +#define EMAC_STACR_OP_MASK (0x00001800) +#define EMAC_STACR_MDIO_ADDR (0x00000000) +#define EMAC_STACR_MDIO_WRITE (0x00000800) +#define EMAC_STACR_MDIO_READ (0x00001800) +#define EMAC_STACR_MDIO_READ_INC (0x00001000) #else -#define EMAC_STACR_WRITE (0x00002000) -#define EMAC_STACR_READ (0x00001000) +#define EMAC_STACR_WRITE (0x00002000) +#define EMAC_STACR_READ (0x00001000) #endif #define EMAC_STACR_CLK_83MHZ (0x00000800) /* 0's for 50Mhz */ @@ -467,9 +458,9 @@ typedef struct emac_4xx_hw_st { #define EMAC_STACR_CLK_100MHZ (0x00000C00) /* Transmit Request Threshold Register */ -#define EMAC_TRTR_256 (0x18000000) /* 0's for 64 Bytes */ -#define EMAC_TRTR_192 (0x10000000) -#define EMAC_TRTR_128 (0x01000000) +#define EMAC_TRTR_256 (0x18000000) /* 0's for 64 Bytes */ +#define EMAC_TRTR_192 (0x10000000) +#define EMAC_TRTR_128 (0x01000000) /* the follwing defines are for the MadMAL status and control registers. */ /* For bits 0..5 look at the mal.h file */ -- cgit v0.10.2