From 703ec9ddf965063cd79910df281657b056879368 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Mon, 19 Jun 2017 11:53:47 -0700 Subject: MIPS: Stop building position independent code U-Boot has up until now built with -fpic for the MIPS architecture, producing position independent code which uses indirection through a global offset table, making relocation fairly straightforward as it simply involves patching up GOT entries. Using -fpic does however have some downsides. The biggest of these is that generated code is bloated in various ways. For example, function calls are indirected through the GOT & the t9 register: 8f998064 lw t9,-32668(gp) 0320f809 jalr t9 Without -fpic the call is simply: 0f803f01 jal be00fc04 This is more compact & faster (due to the lack of the load & the dependency the jump has on its result). It is also easier to read & debug because the disassembly shows what function is being called, rather than just an offset from gp which would then have to be looked up in the ELF to discover the target function. Another disadvantage of -fpic is that each function begins with a sequence to calculate the value of the gp register, for example: 3c1c0004 lui gp,0x4 279c3384 addiu gp,gp,13188 0399e021 addu gp,gp,t9 Without using -fpic this sequence no longer appears at the start of each function, reducing code size considerably. This patch switches U-Boot from building with -fpic to building with -fno-pic, in order to gain the benefits described above. The cost of this is an extra step during the build process to extract relocation data from the ELF & write it into a new .rel section in a compact format, plus the added complexity of dealing with multiple types of relocation rather than the single type that applied to the GOT. The benefit is smaller, cleaner, more debuggable code. The relocate_code() function is reimplemented in C to handle the new relocation scheme, which also makes it easier to read & debug. Taking maltael_defconfig as an example the size of u-boot.bin built using the Codescape MIPS 2016.05-06 toolchain (gcc 4.9.2, binutils 2.24.90) shrinks from 254KiB to 224KiB. Signed-off-by: Paul Burton Cc: Daniel Schwierzeck Cc: u-boot@lists.denx.de Reviewed-by: Daniel Schwierzeck Tested-by: Daniel Schwierzeck diff --git a/arch/mips/Makefile.postlink b/arch/mips/Makefile.postlink new file mode 100644 index 0000000..7da3acd --- /dev/null +++ b/arch/mips/Makefile.postlink @@ -0,0 +1,23 @@ +# +# Copyright (c) 2017 Imagination Technologies Ltd. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +PHONY := __archpost +__archpost: + +-include include/config/auto.conf +include scripts/Kbuild.include + +CMD_RELOCS = tools/mips-relocs +quiet_cmd_relocs = RELOCS $@ + cmd_relocs = $(CMD_RELOCS) $@ + +u-boot: FORCE + @true + $(call if_changed,relocs) + +.PHONY: FORCE + +FORCE: diff --git a/arch/mips/config.mk b/arch/mips/config.mk index 2c72c15..cefdbe6 100644 --- a/arch/mips/config.mk +++ b/arch/mips/config.mk @@ -56,25 +56,14 @@ PLATFORM_ELFFLAGS += -B mips $(OBJCOPYFLAGS) # LDFLAGS_vmlinux += -G 0 -static -n -nostdlib # MODFLAGS += -mlong-calls # -# On the other hand, we want PIC in the U-Boot code to relocate it from ROM -# to RAM. $28 is always used as gp. -# -ifdef CONFIG_SPL_BUILD -PF_ABICALLS := -mno-abicalls -PF_PIC := -fno-pic -PF_PIE := -else -PF_ABICALLS := -mabicalls -PF_PIC := -fpic -PF_PIE := -pie -PF_OBJCOPY := -j .got -j .rel.dyn -j .padding -PF_OBJCOPY += -j .dtb.init.rodata +ifndef CONFIG_SPL_BUILD +OBJCOPYFLAGS += -j .got -j .rel -j .padding -j .dtb.init.rodata +LDFLAGS_FINAL += --emit-relocs endif -PLATFORM_CPPFLAGS += -G 0 $(PF_ABICALLS) $(PF_PIC) +PLATFORM_CPPFLAGS += -G 0 -mno-abicalls -fno-pic PLATFORM_CPPFLAGS += -msoft-float PLATFORM_LDFLAGS += -G 0 -static -n -nostdlib PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections -LDFLAGS_FINAL += --gc-sections $(PF_PIE) +LDFLAGS_FINAL += --gc-sections OBJCOPYFLAGS += -j .text -j .rodata -j .data -j .u_boot_list -OBJCOPYFLAGS += $(PF_OBJCOPY) diff --git a/arch/mips/cpu/start.S b/arch/mips/cpu/start.S index d01ee9f..952c57a 100644 --- a/arch/mips/cpu/start.S +++ b/arch/mips/cpu/start.S @@ -221,18 +221,6 @@ wr_done: ehb #endif - /* - * Initialize $gp, force pointer sized alignment of bal instruction to - * forbid the compiler to put nop's between bal and _gp. This is - * required to keep _gp and ra aligned to 8 byte. - */ - .align PTRLOG - bal 1f - nop - PTR _gp -1: - PTR_L gp, 0(ra) - #ifdef CONFIG_MIPS_CM PTR_LA t9, mips_cm_map jalr t9 @@ -291,121 +279,3 @@ wr_done: move ra, zero END(_start) - -/* - * void relocate_code (addr_sp, gd, addr_moni) - * - * This "function" does not return, instead it continues in RAM - * after relocating the monitor code. - * - * a0 = addr_sp - * a1 = gd - * a2 = destination address - */ -ENTRY(relocate_code) - move sp, a0 # set new stack pointer - move fp, sp - - move s0, a1 # save gd in s0 - move s2, a2 # save destination address in s2 - - PTR_LI t0, CONFIG_SYS_MONITOR_BASE - PTR_SUB s1, s2, t0 # s1 <-- relocation offset - - PTR_LA t2, __image_copy_end - move t1, a2 - - /* - * t0 = source address - * t1 = target address - * t2 = source end address - */ -1: - PTR_L t3, 0(t0) - PTR_S t3, 0(t1) - PTR_ADDU t0, PTRSIZE - blt t0, t2, 1b - PTR_ADDU t1, PTRSIZE - - /* - * Now we want to update GOT. - * - * GOT[0] is reserved. GOT[1] is also reserved for the dynamic object - * generated by GNU ld. Skip these reserved entries from relocation. - */ - PTR_LA t3, num_got_entries - PTR_LA t8, _GLOBAL_OFFSET_TABLE_ - PTR_ADD t8, s1 # t8 now holds relocated _G_O_T_ - PTR_ADDIU t8, t8, 2 * PTRSIZE # skipping first two entries - PTR_LI t2, 2 -1: - PTR_L t1, 0(t8) - beqz t1, 2f - PTR_ADD t1, s1 - PTR_S t1, 0(t8) -2: - PTR_ADDIU t2, 1 - blt t2, t3, 1b - PTR_ADDIU t8, PTRSIZE - - /* Update dynamic relocations */ - PTR_LA t1, __rel_dyn_start - PTR_LA t2, __rel_dyn_end - - b 2f # skip first reserved entry - PTR_ADDIU t1, 2 * PTRSIZE - -1: - lw t8, -4(t1) # t8 <-- relocation info - - PTR_LI t3, MIPS_RELOC - bne t8, t3, 2f # skip non-MIPS_RELOC entries - nop - - PTR_L t3, -(2 * PTRSIZE)(t1) # t3 <-- location to fix up in FLASH - - PTR_L t8, 0(t3) # t8 <-- original pointer - PTR_ADD t8, s1 # t8 <-- adjusted pointer - - PTR_ADD t3, s1 # t3 <-- location to fix up in RAM - PTR_S t8, 0(t3) - -2: - blt t1, t2, 1b - PTR_ADDIU t1, 2 * PTRSIZE # each rel.dyn entry is 2*PTRSIZE bytes - - /* - * Flush caches to ensure our newly modified instructions are visible - * to the instruction cache. We're still running with the old GOT, so - * apply the reloc offset to the start address. - */ - PTR_LA a0, __text_start - PTR_LA a1, __text_end - PTR_SUB a1, a1, a0 - PTR_LA t9, flush_cache - jalr t9 - PTR_ADD a0, s1 - - PTR_ADD gp, s1 # adjust gp - - /* - * Clear BSS - * - * GOT is now relocated. Thus __bss_start and __bss_end can be - * accessed directly via $gp. - */ - PTR_LA t1, __bss_start # t1 <-- __bss_start - PTR_LA t2, __bss_end # t2 <-- __bss_end - -1: - PTR_S zero, 0(t1) - blt t1, t2, 1b - PTR_ADDIU t1, PTRSIZE - - move a0, s0 # a0 <-- gd - move a1, s2 - PTR_LA t9, board_init_r - jr t9 - move ra, zero - - END(relocate_code) diff --git a/arch/mips/cpu/u-boot.lds b/arch/mips/cpu/u-boot.lds index 0129c99..bd5536f 100644 --- a/arch/mips/cpu/u-boot.lds +++ b/arch/mips/cpu/u-boot.lds @@ -34,15 +34,6 @@ SECTIONS *(.data*) } - . = .; - _gp = ALIGN(16) + 0x7ff0; - - .got : { - *(.got) - } - - num_got_entries = SIZEOF(.got) >> PTR_COUNT_SHIFT; - . = ALIGN(4); .sdata : { *(.sdata*) @@ -57,33 +48,19 @@ SECTIONS __image_copy_end = .; __init_end = .; - .rel.dyn : { - __rel_dyn_start = .; - *(.rel.dyn) - __rel_dyn_end = .; - } - - .padding : { - /* - * Workaround for a binutils feature (or bug?). - * - * The GNU ld from binutils puts the dynamic relocation - * entries into the .rel.dyn section. Sometimes it - * allocates more dynamic relocation entries than it needs - * and the unused slots are set to R_MIPS_NONE entries. - * - * However the size of the .rel.dyn section in the ELF - * section header does not cover the unused entries, so - * objcopy removes those during stripping. - * - * Create a small section here to avoid that. - */ - LONG(0xFFFFFFFF) + /* + * .rel must come last so that the mips-relocs tool can shrink + * the section size & the PT_LOAD program header filesz. + */ + .rel : { + __rel_start = .; + BYTE(0x0) + . += (32 * 1024) - 1; } _end = .; - .bss __rel_dyn_start (OVERLAY) : { + .bss __rel_start (OVERLAY) : { __bss_start = .; *(.sbss.*) *(.bss.*) diff --git a/arch/mips/include/asm/relocs.h b/arch/mips/include/asm/relocs.h new file mode 100644 index 0000000..92e9d04 --- /dev/null +++ b/arch/mips/include/asm/relocs.h @@ -0,0 +1,24 @@ +/* + * MIPS Relocations + * + * Copyright (c) 2017 Imagination Technologies Ltd. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_MIPS_RELOCS_H__ +#define __ASM_MIPS_RELOCS_H__ + +#define R_MIPS_NONE 0 +#define R_MIPS_32 2 +#define R_MIPS_26 4 +#define R_MIPS_HI16 5 +#define R_MIPS_LO16 6 +#define R_MIPS_PC16 10 +#define R_MIPS_64 18 +#define R_MIPS_HIGHER 28 +#define R_MIPS_HIGHEST 29 +#define R_MIPS_PC21_S2 60 +#define R_MIPS_PC26_S2 61 + +#endif /* __ASM_MIPS_RELOCS_H__ */ diff --git a/arch/mips/include/asm/sections.h b/arch/mips/include/asm/sections.h index fc4640a..b9d2179 100644 --- a/arch/mips/include/asm/sections.h +++ b/arch/mips/include/asm/sections.h @@ -8,4 +8,11 @@ #include +/** + * __rel_start: Relocation data generated by the mips-relocs tool + * + * See arch/mips/lib/reloc.c for details on the format & use of this data. + */ +extern uint8_t __rel_start[]; + #endif diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index 659c6ad..ef557c6 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -8,6 +8,7 @@ obj-y += cache.o obj-y += cache_init.o obj-y += genex.o +obj-y += reloc.o obj-y += stack.o obj-y += traps.o diff --git a/arch/mips/lib/reloc.c b/arch/mips/lib/reloc.c new file mode 100644 index 0000000..d0c52c9 --- /dev/null +++ b/arch/mips/lib/reloc.c @@ -0,0 +1,164 @@ +/* + * MIPS Relocation + * + * Copyright (c) 2017 Imagination Technologies Ltd. + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Relocation data, found in the .rel section, is generated by the mips-relocs + * tool & contains a record of all locations in the U-Boot binary that need to + * be fixed up during relocation. + * + * The data is a sequence of unsigned integers, which are of somewhat arbitrary + * size. This is achieved by encoding integers as a sequence of bytes, each of + * which contains 7 bits of data with the most significant bit indicating + * whether any further bytes need to be read. The least significant bits of the + * integer are found in the first byte - ie. it somewhat resembles little + * endian. + * + * Each pair of two integers represents a relocation that must be applied. The + * first integer represents the type of relocation as a standard ELF relocation + * type (ie. R_MIPS_*). The second integer represents the offset at which to + * apply the relocation, relative to the previous relocation or for the first + * relocation the start of the relocated .text section. + * + * The end of the relocation data is indicated when type R_MIPS_NONE (0) is + * read, at which point no further integers should be read. That is, the + * terminating R_MIPS_NONE reloc includes no offset. + */ + +#include +#include +#include + +/** + * read_uint() - Read an unsigned integer from the buffer + * @buf: pointer to a pointer to the reloc buffer + * + * Read one whole unsigned integer from the relocation data pointed to by @buf, + * advancing @buf past the bytes encoding the integer. + * + * Returns: the integer read from @buf + */ +static unsigned long read_uint(uint8_t **buf) +{ + unsigned long val = 0; + unsigned int shift = 0; + uint8_t new; + + do { + new = *(*buf)++; + val |= (new & 0x7f) << shift; + shift += 7; + } while (new & 0x80); + + return val; +} + +/** + * apply_reloc() - Apply a single relocation + * @type: the type of reloc (R_MIPS_*) + * @addr: the address that the reloc should be applied to + * @off: the relocation offset, ie. number of bytes we're moving U-Boot by + * + * Apply a single relocation of type @type at @addr. This function is + * intentionally simple, and does the bare minimum needed to fixup the + * relocated U-Boot - in particular, it does not check for overflows. + */ +static void apply_reloc(unsigned int type, void *addr, long off) +{ + uint32_t u32; + + switch (type) { + case R_MIPS_26: + u32 = *(uint32_t *)addr; + u32 = (u32 & GENMASK(31, 26)) | + ((u32 + (off >> 2)) & GENMASK(25, 0)); + *(uint32_t *)addr = u32; + break; + + case R_MIPS_32: + *(uint32_t *)addr += off; + break; + + case R_MIPS_64: + *(uint64_t *)addr += off; + break; + + case R_MIPS_HI16: + *(uint32_t *)addr += off >> 16; + break; + + default: + panic("Unhandled reloc type %u\n", type); + } +} + +/** + * relocate_code() - Relocate U-Boot, generally from flash to DDR + * @start_addr_sp: new stack pointer + * @new_gd: pointer to relocated global data + * @relocaddr: the address to relocate to + * + * Relocate U-Boot from its current location (generally in flash) to a new one + * (generally in DDR). This function will copy the U-Boot binary & apply + * relocations as necessary, then jump to board_init_r in the new build of + * U-Boot. As such, this function does not return. + */ +void relocate_code(ulong start_addr_sp, gd_t *new_gd, ulong relocaddr) +{ + unsigned long addr, length, bss_len; + uint8_t *buf, *bss_start; + unsigned int type; + long off; + + /* + * Ensure that we're relocating by an offset which is a multiple of + * 64KiB, ie. doesn't change the least significant 16 bits of any + * addresses. This allows us to discard R_MIPS_LO16 relocs, saving + * space in the U-Boot binary & complexity in handling them. + */ + off = relocaddr - (unsigned long)__text_start; + if (off & 0xffff) + panic("Mis-aligned relocation\n"); + + /* Copy U-Boot to RAM */ + length = __image_copy_end - __text_start; + memcpy((void *)relocaddr, __text_start, length); + + /* Now apply relocations to the copy in RAM */ + buf = __rel_start; + addr = relocaddr; + while (true) { + type = read_uint(&buf); + if (type == R_MIPS_NONE) + break; + + addr += read_uint(&buf) << 2; + apply_reloc(type, (void *)addr, off); + } + + /* Ensure the icache is coherent */ + flush_cache(relocaddr, length); + + /* Clear the .bss section */ + bss_start = (uint8_t *)((unsigned long)__bss_start + off); + bss_len = (unsigned long)&__bss_end - (unsigned long)__bss_start; + memset(bss_start, 0, bss_len); + + /* Jump to the relocated U-Boot */ + asm volatile( + "move $29, %0\n" + " move $4, %1\n" + " move $5, %2\n" + " move $31, $0\n" + " jr %3" + : /* no outputs */ + : "r"(start_addr_sp), + "r"(new_gd), + "r"(relocaddr), + "r"((unsigned long)board_init_r + off)); + + /* Since we jumped to the new U-Boot above, we won't get here */ + unreachable(); +} diff --git a/common/board_f.c b/common/board_f.c index ffa84e3..49c8bc8 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -418,7 +418,7 @@ static int reserve_uboot(void) */ gd->relocaddr -= gd->mon_len; gd->relocaddr &= ~(4096 - 1); -#ifdef CONFIG_E500 +#if defined(CONFIG_E500) || defined(CONFIG_MIPS) /* round down to next 64 kB limit so that IVPR stays aligned */ gd->relocaddr &= ~(65536 - 1); #endif diff --git a/tools/.gitignore b/tools/.gitignore index 6ec71f5..ac0c979 100644 --- a/tools/.gitignore +++ b/tools/.gitignore @@ -11,6 +11,7 @@ /img2srec /kwboot /dumpimage +/mips-relocs /mkenvimage /mkimage /mkexynosspl diff --git a/tools/Makefile b/tools/Makefile index 62a7921..0743677 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -211,6 +211,8 @@ hostprogs-$(CONFIG_STATIC_RELA) += relocate-rela hostprogs-y += fdtgrep fdtgrep-objs += $(LIBFDT_OBJS) fdtgrep.o +hostprogs-$(CONFIG_MIPS) += mips-relocs + # We build some files with extra pedantic flags to try to minimize things # that won't build on some weird host compiler -- though there are lots of # exceptions for files that aren't complaint. diff --git a/tools/mips-relocs.c b/tools/mips-relocs.c new file mode 100644 index 0000000..b690fa5 --- /dev/null +++ b/tools/mips-relocs.c @@ -0,0 +1,426 @@ +/* + * MIPS Relocation Data Generator + * + * Copyright (c) 2017 Imagination Technologies Ltd. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define hdr_field(pfx, idx, field) ({ \ + uint64_t _val; \ + unsigned int _size; \ + \ + if (is_64) { \ + _val = pfx##hdr64[idx].field; \ + _size = sizeof(pfx##hdr64[0].field); \ + } else { \ + _val = pfx##hdr32[idx].field; \ + _size = sizeof(pfx##hdr32[0].field); \ + } \ + \ + switch (_size) { \ + case 1: \ + break; \ + case 2: \ + _val = is_be ? be16toh(_val) : le16toh(_val); \ + break; \ + case 4: \ + _val = is_be ? be32toh(_val) : le32toh(_val); \ + break; \ + case 8: \ + _val = is_be ? be64toh(_val) : le64toh(_val); \ + break; \ + } \ + \ + _val; \ +}) + +#define set_hdr_field(pfx, idx, field, val) ({ \ + uint64_t _val; \ + unsigned int _size; \ + \ + if (is_64) \ + _size = sizeof(pfx##hdr64[0].field); \ + else \ + _size = sizeof(pfx##hdr32[0].field); \ + \ + switch (_size) { \ + case 1: \ + _val = val; \ + break; \ + case 2: \ + _val = is_be ? htobe16(val) : htole16(val); \ + break; \ + case 4: \ + _val = is_be ? htobe32(val) : htole32(val); \ + break; \ + case 8: \ + _val = is_be ? htobe64(val) : htole64(val); \ + break; \ + } \ + \ + if (is_64) \ + pfx##hdr64[idx].field = _val; \ + else \ + pfx##hdr32[idx].field = _val; \ +}) + +#define ehdr_field(field) \ + hdr_field(e, 0, field) +#define phdr_field(idx, field) \ + hdr_field(p, idx, field) +#define shdr_field(idx, field) \ + hdr_field(s, idx, field) + +#define set_phdr_field(idx, field, val) \ + set_hdr_field(p, idx, field, val) +#define set_shdr_field(idx, field, val) \ + set_hdr_field(s, idx, field, val) + +#define shstr(idx) (&shstrtab[idx]) + +bool is_64, is_be; +uint64_t text_base; + +struct mips_reloc { + uint8_t type; + uint64_t offset; +} *relocs; +size_t relocs_sz, relocs_idx; + +static int add_reloc(unsigned int type, uint64_t off) +{ + struct mips_reloc *new; + size_t new_sz; + + switch (type) { + case R_MIPS_NONE: + case R_MIPS_LO16: + case R_MIPS_PC16: + case R_MIPS_HIGHER: + case R_MIPS_HIGHEST: + case R_MIPS_PC21_S2: + case R_MIPS_PC26_S2: + /* Skip these relocs */ + return 0; + + default: + break; + } + + if (relocs_idx == relocs_sz) { + new_sz = relocs_sz ? relocs_sz * 2 : 128; + new = realloc(relocs, new_sz * sizeof(*relocs)); + if (!new) { + fprintf(stderr, "Out of memory\n"); + return -ENOMEM; + } + + relocs = new; + relocs_sz = new_sz; + } + + relocs[relocs_idx++] = (struct mips_reloc){ + .type = type, + .offset = off, + }; + + return 0; +} + +static int parse_mips32_rel(const void *_rel) +{ + const Elf32_Rel *rel = _rel; + uint32_t off, type; + + off = is_be ? be32toh(rel->r_offset) : le32toh(rel->r_offset); + off -= text_base; + + type = is_be ? be32toh(rel->r_info) : le32toh(rel->r_info); + type = ELF32_R_TYPE(type); + + return add_reloc(type, off); +} + +static int parse_mips64_rela(const void *_rel) +{ + const Elf64_Rela *rel = _rel; + uint64_t off, type; + + off = is_be ? be64toh(rel->r_offset) : le64toh(rel->r_offset); + off -= text_base; + + type = rel->r_info >> (64 - 8); + + return add_reloc(type, off); +} + +static void output_uint(uint8_t **buf, uint64_t val) +{ + uint64_t tmp; + + do { + tmp = val & 0x7f; + val >>= 7; + tmp |= !!val << 7; + *(*buf)++ = tmp; + } while (val); +} + +static int compare_relocs(const void *a, const void *b) +{ + const struct mips_reloc *ra = a, *rb = b; + + return ra->offset - rb->offset; +} + +int main(int argc, char *argv[]) +{ + unsigned int i, j, i_rel_shdr, sh_type, sh_entsize, sh_entries; + size_t rel_size, rel_actual_size, load_sz; + const char *shstrtab, *sh_name, *rel_pfx; + int (*parse_fn)(const void *rel); + uint8_t *buf_start, *buf; + const Elf32_Ehdr *ehdr32; + const Elf64_Ehdr *ehdr64; + uintptr_t sh_offset; + Elf32_Phdr *phdr32; + Elf64_Phdr *phdr64; + Elf32_Shdr *shdr32; + Elf64_Shdr *shdr64; + struct stat st; + int err, fd; + void *elf; + bool skip; + + fd = open(argv[1], O_RDWR); + if (fd == -1) { + fprintf(stderr, "Unable to open input file %s\n", argv[1]); + err = errno; + goto out_ret; + } + + err = fstat(fd, &st); + if (err) { + fprintf(stderr, "Unable to fstat() input file\n"); + goto out_close_fd; + } + + elf = mmap(NULL, st.st_size, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); + if (elf == MAP_FAILED) { + fprintf(stderr, "Unable to mmap() input file\n"); + err = errno; + goto out_close_fd; + } + + ehdr32 = elf; + ehdr64 = elf; + + if (memcmp(&ehdr32->e_ident[EI_MAG0], ELFMAG, SELFMAG)) { + fprintf(stderr, "Input file is not an ELF\n"); + err = -EINVAL; + goto out_free_relocs; + } + + if (ehdr32->e_ident[EI_VERSION] != EV_CURRENT) { + fprintf(stderr, "Unrecognised ELF version\n"); + err = -EINVAL; + goto out_free_relocs; + } + + switch (ehdr32->e_ident[EI_CLASS]) { + case ELFCLASS32: + is_64 = false; + break; + case ELFCLASS64: + is_64 = true; + break; + default: + fprintf(stderr, "Unrecognised ELF class\n"); + err = -EINVAL; + goto out_free_relocs; + } + + switch (ehdr32->e_ident[EI_DATA]) { + case ELFDATA2LSB: + is_be = false; + break; + case ELFDATA2MSB: + is_be = true; + break; + default: + fprintf(stderr, "Unrecognised ELF data encoding\n"); + err = -EINVAL; + goto out_free_relocs; + } + + if (ehdr_field(e_type) != ET_EXEC) { + fprintf(stderr, "Input ELF is not an executable\n"); + printf("type 0x%lx\n", ehdr_field(e_type)); + err = -EINVAL; + goto out_free_relocs; + } + + if (ehdr_field(e_machine) != EM_MIPS) { + fprintf(stderr, "Input ELF does not target MIPS\n"); + err = -EINVAL; + goto out_free_relocs; + } + + phdr32 = elf + ehdr_field(e_phoff); + phdr64 = elf + ehdr_field(e_phoff); + shdr32 = elf + ehdr_field(e_shoff); + shdr64 = elf + ehdr_field(e_shoff); + shstrtab = elf + shdr_field(ehdr_field(e_shstrndx), sh_offset); + + i_rel_shdr = UINT_MAX; + for (i = 0; i < ehdr_field(e_shnum); i++) { + sh_name = shstr(shdr_field(i, sh_name)); + + if (!strcmp(sh_name, ".rel")) { + i_rel_shdr = i; + continue; + } + + if (!strcmp(sh_name, ".text")) { + text_base = shdr_field(i, sh_addr); + continue; + } + } + if (i_rel_shdr == UINT_MAX) { + fprintf(stderr, "Unable to find .rel section\n"); + err = -EINVAL; + goto out_free_relocs; + } + if (!text_base) { + fprintf(stderr, "Unable to find .text base address\n"); + err = -EINVAL; + goto out_free_relocs; + } + + rel_pfx = is_64 ? ".rela." : ".rel."; + + for (i = 0; i < ehdr_field(e_shnum); i++) { + sh_type = shdr_field(i, sh_type); + if ((sh_type != SHT_REL) && (sh_type != SHT_RELA)) + continue; + + sh_name = shstr(shdr_field(i, sh_name)); + if (strncmp(sh_name, rel_pfx, strlen(rel_pfx))) { + if (strcmp(sh_name, ".rel") && strcmp(sh_name, ".rel.dyn")) + fprintf(stderr, "WARNING: Unexpected reloc section name '%s'\n", sh_name); + continue; + } + + /* + * Skip reloc sections which either don't correspond to another + * section in the ELF, or whose corresponding section isn't + * loaded as part of the U-Boot binary (ie. doesn't have the + * alloc flags set). + */ + skip = true; + for (j = 0; j < ehdr_field(e_shnum); j++) { + if (strcmp(&sh_name[strlen(rel_pfx) - 1], shstr(shdr_field(j, sh_name)))) + continue; + + skip = !(shdr_field(j, sh_flags) & SHF_ALLOC); + break; + } + if (skip) + continue; + + sh_offset = shdr_field(i, sh_offset); + sh_entsize = shdr_field(i, sh_entsize); + sh_entries = shdr_field(i, sh_size) / sh_entsize; + + if (sh_type == SHT_REL) { + if (is_64) { + fprintf(stderr, "REL-style reloc in MIPS64 ELF?\n"); + err = -EINVAL; + goto out_free_relocs; + } else { + parse_fn = parse_mips32_rel; + } + } else { + if (is_64) { + parse_fn = parse_mips64_rela; + } else { + fprintf(stderr, "RELA-style reloc in MIPS32 ELF?\n"); + err = -EINVAL; + goto out_free_relocs; + } + } + + for (j = 0; j < sh_entries; j++) { + err = parse_fn(elf + sh_offset + (j * sh_entsize)); + if (err) + goto out_free_relocs; + } + } + + /* Sort relocs in ascending order of offset */ + qsort(relocs, relocs_idx, sizeof(*relocs), compare_relocs); + + /* Make reloc offsets relative to their predecessor */ + for (i = relocs_idx - 1; i > 0; i--) + relocs[i].offset -= relocs[i - 1].offset; + + /* Write the relocations to the .rel section */ + buf = buf_start = elf + shdr_field(i_rel_shdr, sh_offset); + for (i = 0; i < relocs_idx; i++) { + output_uint(&buf, relocs[i].type); + output_uint(&buf, relocs[i].offset >> 2); + } + + /* Write a terminating R_MIPS_NONE (0) */ + output_uint(&buf, R_MIPS_NONE); + + /* Ensure the relocs didn't overflow the .rel section */ + rel_size = shdr_field(i_rel_shdr, sh_size); + rel_actual_size = buf - buf_start; + if (rel_actual_size > rel_size) { + fprintf(stderr, "Relocs overflowed .rel section\n"); + return -ENOMEM; + } + + /* Update the .rel section's size */ + set_shdr_field(i_rel_shdr, sh_size, rel_actual_size); + + /* Shrink the PT_LOAD program header filesz (ie. shrink u-boot.bin) */ + for (i = 0; i < ehdr_field(e_phnum); i++) { + if (phdr_field(i, p_type) != PT_LOAD) + continue; + + load_sz = phdr_field(i, p_filesz); + load_sz -= rel_size - rel_actual_size; + set_phdr_field(i, p_filesz, load_sz); + break; + } + + /* Make sure data is written back to the file */ + err = msync(elf, st.st_size, MS_SYNC); + if (err) { + fprintf(stderr, "Failed to msync: %d\n", errno); + goto out_free_relocs; + } + +out_free_relocs: + free(relocs); + munmap(elf, st.st_size); +out_close_fd: + close(fd); +out_ret: + return err; +} -- cgit v0.10.2