From 48bb3bb5ac4dd21e931ae157caad6449bcb2d0d4 Mon Sep 17 00:00:00 2001 From: Jerry Huang Date: Thu, 18 Mar 2010 15:57:06 -0500 Subject: fsl_esdhc: Add function to reset the eSDHC controller To support multiple block read command we must set abort or use auto CMD12. If we booted from eSDHC controller neither of these are used and thus we need to reset the controller to allow multiple block read to function. Signed-off-by: Jerry Huang Signed-off-by: Roy Zang Acked-by: Stefano Babic Signed-off-by: Kumar Gala diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 85354e8..999b581 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -344,6 +344,20 @@ static int esdhc_init(struct mmc *mmc) return ret; } +static void esdhc_reset(struct fsl_esdhc *regs) +{ + unsigned long timeout = 100; /* wait max 100 ms */ + + /* reset the controller */ + esdhc_write32(®s->sysctl, SYSCTL_RSTA); + + /* hardware clears the bit when it is done */ + while ((esdhc_read32(®s->sysctl) & SYSCTL_RSTA) && --timeout) + udelay(1000); + if (!timeout) + printf("MMC/SD: Reset never completed.\n"); +} + int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg) { struct fsl_esdhc *regs; @@ -358,6 +372,9 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg) sprintf(mmc->name, "FSL_ESDHC"); regs = (struct fsl_esdhc *)cfg->esdhc_base; + /* First reset the eSDHC controller */ + esdhc_reset(regs); + mmc->priv = cfg; mmc->send_cmd = esdhc_send_cmd; mmc->set_ios = esdhc_set_ios; diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h index 57a08cd..5f02018 100644 --- a/include/fsl_esdhc.h +++ b/include/fsl_esdhc.h @@ -39,6 +39,7 @@ #define SYSCTL_PEREN 0x00000004 #define SYSCTL_HCKEN 0x00000002 #define SYSCTL_IPGEN 0x00000001 +#define SYSCTL_RSTA 0x01000000 #define IRQSTAT 0x0002e030 #define IRQSTAT_DMAE (0x10000000) -- cgit v0.10.2