From 8662bea38e2779a45275a6ac13a378f9f989930a Mon Sep 17 00:00:00 2001 From: Andreas Dannenberg Date: Mon, 27 Jun 2016 09:19:24 -0500 Subject: doc: Update info on using secure devices from TI Adds information regarding SPL handling the loading and processing of secured u-boot images as part of the second stage boot the SPL does. Introduces the description of a new interface script in the TI SECDEV Package which handles the creation and prep of secured binary images. Signed-off-by: Daniel Allred Signed-off-by: Andreas Dannenberg Reviewed-by: Simon Glass diff --git a/doc/README.ti-secure b/doc/README.ti-secure index 7fc9b9b..54c996d 100644 --- a/doc/README.ti-secure +++ b/doc/README.ti-secure @@ -19,69 +19,80 @@ control restrictions. Access must be requested and granted by TI before the package is viewable and downloadable. Contact TI, either online or by way of a local TI representative, to request access. -When CONFIG_TI_SECURE_DEVICE is set, the U-Boot SPL build process requires -the presence and use of these tools in order to create a viable boot image. -The build process will look for the environment variable TI_SECURE_DEV_PKG, -which should be the path of the installed SECDEV package. If the -TI_SECURE_DEV_PKG variable is not defined or if it is defined but doesn't -point to a valid SECDEV package, a warning is issued during the build to -indicate that a final secure bootable image was not created. - -Within the SECDEV package exists an image creation script: - -${TI_SECURE_DEV_PKG}/scripts/create-boot-image.sh - -This is called as part of the SPL/u-boot build process. As the secure boot -image formats and requirements differ between secure SOC from TI, the -purpose of this script is to abstract these details as much as possible. - -The script is basically the only required interface to the TI SECDEV package -for secure TI devices. - -Invoking the script for AM43xx Secure Devices -============================================= - -create-boot-image.sh - - is a value that specifies the type of the image to generate OR -the action the image generation tool will take. Valid values are: - SPI_X-LOADER - Generates an image for SPI flash (byte swapped) - XIP_X-LOADER - Generates a single stage u-boot for NOR/QSPI XiP - ISSW - Generates an image for all other boot modes - - is the full path and filename of the public world boot loader -binary file (depending on the boot media, this is usually either -u-boot-spl.bin or u-boot.bin). - - is the full path and filename of the final secure image. The -output binary images should be used in place of the standard non-secure -binary images (see the platform-specific user's guides and releases notes -for how the non-secure images are typically used) +Booting of U-Boot SPL +===================== + + When CONFIG_TI_SECURE_DEVICE is set, the U-Boot SPL build process + requires the presence and use of these tools in order to create a + viable boot image. The build process will look for the environment + variable TI_SECURE_DEV_PKG, which should be the path of the installed + SECDEV package. If the TI_SECURE_DEV_PKG variable is not defined or + if it is defined but doesn't point to a valid SECDEV package, a + warning is issued during the build to indicate that a final secure + bootable image was not created. + + Within the SECDEV package exists an image creation script: + + ${TI_SECURE_DEV_PKG}/scripts/create-boot-image.sh + + This is called as part of the SPL/u-boot build process. As the secure + boot image formats and requirements differ between secure SOC from TI, + the purpose of this script is to abstract these details as much as + possible. + + The script is basically the only required interface to the TI SECDEV + package for creating a bootable SPL image for secure TI devices. + + Invoking the script for AM43xx Secure Devices + ============================================= + + create-boot-image.sh \ + + + is a value that specifies the type of the image to + generate OR the action the image generation tool will take. Valid + values are: + SPI_X-LOADER - Generates an image for SPI flash (byte + swapped) + XIP_X-LOADER - Generates a single stage u-boot for + NOR/QSPI XiP + ISSW - Generates an image for all other boot modes + + is the full path and filename of the public world boot + loaderbinary file (depending on the boot media, this is usually + either u-boot-spl.bin or u-boot.bin). + + is the full path and filename of the final secure + image. The output binary images should be used in place of the standard + non-secure binary images (see the platform-specific user's guides and + releases notes for how the non-secure images are typically used) u-boot-spl_HS_SPI_X-LOADER - byte swapped boot image for SPI flash u-boot_HS_XIP_X-LOADER - boot image for NOR or QSPI flash u-boot-spl_HS_ISSW - boot image for all other boot media - is the address at which SOC ROM should load the + is the address at which SOC ROM should load the + -Invoking the script for DRA7xx/AM57xx Secure Devices -==================================================== + Invoking the script for DRA7xx/AM57xx Secure Devices + ==================================================== -create-boot-image.sh + create-boot-image.sh - is a value that specifies the type of the image to generate OR -the action the image generation tool will take. Valid values are: - X-LOADER - Generates an image for NOR or QSPI boot modes - MLO - Generates an image for SD/MMC/eMMC boot modes - ULO - Generates an image for USB/UART peripheral boot modes - Note: ULO is not yet used by the u-boot build process + is a value that specifies the type of the image to + generate OR the action the image generation tool will take. Valid + values are: + X-LOADER - Generates an image for NOR or QSPI boot modes + MLO - Generates an image for SD/MMC/eMMC boot modes + ULO - Generates an image for USB/UART peripheral boot modes + Note: ULO is not yet used by the u-boot build process - is the full path and filename of the public world boot loader -binary file (for this platform, this is always u-boot-spl.bin). + is the full path and filename of the public world boot + loader binary file (for this platform, this is always u-boot-spl.bin). - is the full path and filename of the final secure image. The -output binary images should be used in place of the standard non-secure -binary images (see the platform-specific user's guides and releases notes -for how the non-secure images are typically used) + is the full path and filename of the final secure image. + The output binary images should be used in place of the standard + non-secure binary images (see the platform-specific user's guides + and releases notes for how the non-secure images are typically used) u-boot-spl_HS_MLO - boot image for SD/MMC/eMMC. This image is copied to a file named MLO, which is the name that the device ROM bootloader requires for loading from @@ -89,3 +100,61 @@ for how the non-secure images are typically used) non-secure devices) u-boot-spl_HS_X-LOADER - boot image for all other flash memories including QSPI and NOR flash + +Booting of Primary U-Boot (u-boot.img) +====================================== + + The SPL image is responsible for loading the next stage boot loader, + which is the main u-boot image. For secure TI devices, the SPL will + be authenticated, as described above, as part of the particular + device's ROM boot process. In order to continue the secure boot + process, the authenticated SPL must authenticate the main u-boot + image that it loads. + + The configurations for secure TI platforms are written to make the boot + process use the FIT image format for the u-boot.img (CONFIG_SPL_FRAMEWORK + and CONFIG_SPL_LOAD_FIT). With these configurations the binary + components that the SPL loads include a specific DTB image and u-boot + image. These DTB image may be one of many available to the boot + process. In order to secure these components so that they can be + authenticated by the SPL as they are loaded from the FIT image, the + build procedure for secure TI devices will secure these images before + they are integrated into the FIT image. When those images are extracted + from the FIT image at boot time, they are post-processed to verify that + they are still secure. The outlined security-related SPL post-processing + is enabled through the CONFIG_SPL_FIT_IMAGE_POST_PROCESS option which + must be enabled for the secure boot scheme to work. In order to allow + verifying proper operation of the secure boot chain in case of successful + authentication messages like "Authentication passed: CERT_U-BOOT-NOD" are + output by the SPL to the console for each blob that got extracted from the + FIT image. Note that the last part of this log message is the (truncated) + name of the signing certificate embedded into the blob that got processed. + + The exact details of the how the images are secured is handled by the + SECDEV package. Within the SECDEV package exists a script to process + an input binary image: + + ${TI_SECURE_DEV_PKG}/scripts/secure-binary-image.sh + + This is called as part of the u-boot build process. As the secure + image formats and requirements can differ between the various secure + SOCs from TI, this script in the SECDEV package abstracts these + details. This script is essentially the only required interface to the + TI SECDEV package for creating a u-boot.img image for secure TI + devices. + + The SPL/u-boot code contains calls to dedicated secure ROM functions + to perform the validation on the secured images. The details of the + interface to those functions is shown in the code. The summary + is that they are accessed by invoking an ARM secure monitor call to + the device's secure ROM (fixed read-only-memory that is secure and + only accessible when the ARM core is operating in the secure mode). + + Invoking the secure-binary-image script for Secure Devices + ========================================================== + + secure-binary-image.sh + + is the full path and filename of the input binary image + + is the full path and filename of the output secure image. -- cgit v0.10.2