From 4e5439ac25486e34568d96f99fefb464a857855c Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Heiko=20St=C3=BCbner?= <heiko@sntech.de>
Date: Fri, 7 Apr 2017 12:38:52 +0200
Subject: rockchip: sysreset: rk3188: Make sure remap is off on warm-resets

The warm-reset of rk3188 socs keeps the remap setting as it was, so if
it was enabled, the cpu would start from address 0x0 of the sram instead
of address 0x0 of the bootrom, thus making the reset hang.

Therefore make sure the remap is disabled before attempting a warm reset.

Cold reset is not affected by this at all.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Simon Glass <sjg@chromium.org>

diff --git a/drivers/sysreset/sysreset_rk3188.c b/drivers/sysreset/sysreset_rk3188.c
index 36ae476..053a634 100644
--- a/drivers/sysreset/sysreset_rk3188.c
+++ b/drivers/sysreset/sysreset_rk3188.c
@@ -7,21 +7,36 @@
 #include <common.h>
 #include <dm.h>
 #include <errno.h>
+#include <syscon.h>
 #include <sysreset.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/cru_rk3188.h>
+#include <asm/arch/grf_rk3188.h>
 #include <asm/arch/hardware.h>
 #include <linux/err.h>
 
 int rk3188_sysreset_request(struct udevice *dev, enum sysreset_t type)
 {
 	struct rk3188_cru *cru = rockchip_get_cru();
+	struct rk3188_grf *grf;
 
 	if (IS_ERR(cru))
 		return PTR_ERR(cru);
 	switch (type) {
 	case SYSRESET_WARM:
+		grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+		if (IS_ERR(grf))
+			return -EPROTONOSUPPORT;
+
+		/*
+		 * warm-reset keeps the remap value,
+		 * so make sure it's disabled.
+		 */
+		rk_clrsetreg(&grf->soc_con0,
+			NOC_REMAP_MASK << NOC_REMAP_SHIFT,
+			0 << NOC_REMAP_SHIFT);
+
 		rk_clrreg(&cru->cru_mode_con, 0xffff);
 		writel(0xeca8, &cru->cru_glb_srst_snd_value);
 		break;
-- 
cgit v0.10.2